diff options
Diffstat (limited to 'drivers/tty/moxa.c')
| -rw-r--r-- | drivers/tty/moxa.c | 2092 |
1 files changed, 2092 insertions, 0 deletions
diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c new file mode 100644 index 000000000000..35b0c38590e6 --- /dev/null +++ b/drivers/tty/moxa.c @@ -0,0 +1,2092 @@ +/*****************************************************************************/ +/* + * moxa.c -- MOXA Intellio family multiport serial driver. + * + * Copyright (C) 1999-2000 Moxa Technologies (support@moxa.com). + * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> + * + * This code is loosely based on the Linux serial driver, written by + * Linus Torvalds, Theodore T'so and others. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/* + * MOXA Intellio Series Driver + * for : LINUX + * date : 1999/1/7 + * version : 5.1 + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/errno.h> +#include <linux/firmware.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/major.h> +#include <linux/string.h> +#include <linux/fcntl.h> +#include <linux/ptrace.h> +#include <linux/serial.h> +#include <linux/tty_driver.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/bitops.h> +#include <linux/slab.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/uaccess.h> + +#include "moxa.h" + +#define MOXA_VERSION "6.0k" + +#define MOXA_FW_HDRLEN 32 + +#define MOXAMAJOR 172 + +#define MAX_BOARDS 4 /* Don't change this value */ +#define MAX_PORTS_PER_BOARD 32 /* Don't change this value */ +#define MAX_PORTS (MAX_BOARDS * MAX_PORTS_PER_BOARD) + +#define MOXA_IS_320(brd) ((brd)->boardType == MOXA_BOARD_C320_ISA || \ + (brd)->boardType == MOXA_BOARD_C320_PCI) + +/* + * Define the Moxa PCI vendor and device IDs. + */ +#define MOXA_BUS_TYPE_ISA 0 +#define MOXA_BUS_TYPE_PCI 1 + +enum { + MOXA_BOARD_C218_PCI = 1, + MOXA_BOARD_C218_ISA, + MOXA_BOARD_C320_PCI, + MOXA_BOARD_C320_ISA, + MOXA_BOARD_CP204J, +}; + +static char *moxa_brdname[] = +{ + "C218 Turbo PCI series", + "C218 Turbo ISA series", + "C320 Turbo PCI series", + "C320 Turbo ISA series", + "CP-204J series", +}; + +#ifdef CONFIG_PCI +static struct pci_device_id moxa_pcibrds[] = { + { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C218), + .driver_data = MOXA_BOARD_C218_PCI }, + { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C320), + .driver_data = MOXA_BOARD_C320_PCI }, + { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP204J), + .driver_data = MOXA_BOARD_CP204J }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, moxa_pcibrds); +#endif /* CONFIG_PCI */ + +struct moxa_port; + +static struct moxa_board_conf { + int boardType; + int numPorts; + int busType; + + unsigned int ready; + + struct moxa_port *ports; + + void __iomem *basemem; + void __iomem *intNdx; + void __iomem *intPend; + void __iomem *intTable; +} moxa_boards[MAX_BOARDS]; + +struct mxser_mstatus { + tcflag_t cflag; + int cts; + int dsr; + int ri; + int dcd; +}; + +struct moxaq_str { + int inq; + int outq; +}; + +struct moxa_port { + struct tty_port port; + struct moxa_board_conf *board; + void __iomem *tableAddr; + + int type; + int cflag; + unsigned long statusflags; + + u8 DCDState; /* Protected by the port lock */ + u8 lineCtrl; + u8 lowChkFlag; +}; + +struct mon_str { + int tick; + int rxcnt[MAX_PORTS]; + int txcnt[MAX_PORTS]; +}; + +/* statusflags */ +#define TXSTOPPED 1 +#define LOWWAIT 2 +#define EMPTYWAIT 3 + +#define SERIAL_DO_RESTART + +#define WAKEUP_CHARS 256 + +static int ttymajor = MOXAMAJOR; +static struct mon_str moxaLog; +static unsigned int moxaFuncTout = HZ / 2; +static unsigned int moxaLowWaterChk; +static DEFINE_MUTEX(moxa_openlock); +static DEFINE_SPINLOCK(moxa_lock); + +static unsigned long baseaddr[MAX_BOARDS]; +static unsigned int type[MAX_BOARDS]; +static unsigned int numports[MAX_BOARDS]; + +MODULE_AUTHOR("William Chen"); +MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("c218tunx.cod"); +MODULE_FIRMWARE("cp204unx.cod"); +MODULE_FIRMWARE("c320tunx.cod"); + +module_param_array(type, uint, NULL, 0); +MODULE_PARM_DESC(type, "card type: C218=2, C320=4"); +module_param_array(baseaddr, ulong, NULL, 0); +MODULE_PARM_DESC(baseaddr, "base address"); +module_param_array(numports, uint, NULL, 0); +MODULE_PARM_DESC(numports, "numports (ignored for C218)"); + +module_param(ttymajor, int, 0); + +/* + * static functions: + */ +static int moxa_open(struct tty_struct *, struct file *); +static void moxa_close(struct tty_struct *, struct file *); +static int moxa_write(struct tty_struct *, const unsigned char *, int); +static int moxa_write_room(struct tty_struct *); +static void moxa_flush_buffer(struct tty_struct *); +static int moxa_chars_in_buffer(struct tty_struct *); +static void moxa_set_termios(struct tty_struct *, struct ktermios *); +static void moxa_stop(struct tty_struct *); +static void moxa_start(struct tty_struct *); +static void moxa_hangup(struct tty_struct *); +static int moxa_tiocmget(struct tty_struct *tty); +static int moxa_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); +static void moxa_poll(unsigned long); +static void moxa_set_tty_param(struct tty_struct *, struct ktermios *); +static void moxa_shutdown(struct tty_port *); +static int moxa_carrier_raised(struct tty_port *); +static void moxa_dtr_rts(struct tty_port *, int); +/* + * moxa board interface functions: + */ +static void MoxaPortEnable(struct moxa_port *); +static void MoxaPortDisable(struct moxa_port *); +static int MoxaPortSetTermio(struct moxa_port *, struct ktermios *, speed_t); +static int MoxaPortGetLineOut(struct moxa_port *, int *, int *); +static void MoxaPortLineCtrl(struct moxa_port *, int, int); +static void MoxaPortFlowCtrl(struct moxa_port *, int, int, int, int, int); +static int MoxaPortLineStatus(struct moxa_port *); +static void MoxaPortFlushData(struct moxa_port *, int); +static int MoxaPortWriteData(struct tty_struct *, const unsigned char *, int); +static int MoxaPortReadData(struct moxa_port *); +static int MoxaPortTxQueue(struct moxa_port *); +static int MoxaPortRxQueue(struct moxa_port *); +static int MoxaPortTxFree(struct moxa_port *); +static void MoxaPortTxDisable(struct moxa_port *); +static void MoxaPortTxEnable(struct moxa_port *); +static int moxa_get_serial_info(struct moxa_port *, struct serial_struct __user *); +static int moxa_set_serial_info(struct moxa_port *, struct serial_struct __user *); +static void MoxaSetFifo(struct moxa_port *port, int enable); + +/* + * I/O functions + */ + +static DEFINE_SPINLOCK(moxafunc_lock); + +static void moxa_wait_finish(void __iomem *ofsAddr) +{ + unsigned long end = jiffies + moxaFuncTout; + + while (readw(ofsAddr + FuncCode) != 0) + if (time_after(jiffies, end)) + return; + if (readw(ofsAddr + FuncCode) != 0 && printk_ratelimit()) + printk(KERN_WARNING "moxa function expired\n"); +} + +static void moxafunc(void __iomem *ofsAddr, u16 cmd, u16 arg) +{ + unsigned long flags; + spin_lock_irqsave(&moxafunc_lock, flags); + writew(arg, ofsAddr + FuncArg); + writew(cmd, ofsAddr + FuncCode); + moxa_wait_finish(ofsAddr); + spin_unlock_irqrestore(&moxafunc_lock, flags); +} + +static int moxafuncret(void __iomem *ofsAddr, u16 cmd, u16 arg) +{ + unsigned long flags; + u16 ret; + spin_lock_irqsave(&moxafunc_lock, flags); + writew(arg, ofsAddr + FuncArg); + writew(cmd, ofsAddr + FuncCode); + moxa_wait_finish(ofsAddr); + ret = readw(ofsAddr + FuncArg); + spin_unlock_irqrestore(&moxafunc_lock, flags); + return ret; +} + +static void moxa_low_water_check(void __iomem *ofsAddr) +{ + u16 rptr, wptr, mask, len; + + if (readb(ofsAddr + FlagStat) & Xoff_state) { + rptr = readw(ofsAddr + RXrptr); + wptr = readw(ofsAddr + RXwptr); + mask = readw(ofsAddr + RX_mask); + len = (wptr - rptr) & mask; + if (len <= Low_water) + moxafunc(ofsAddr, FC_SendXon, 0); + } +} + +/* + * TTY operations + */ + +static int moxa_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct moxa_port *ch = tty->driver_data; + void __user *argp = (void __user *)arg; + int status, ret = 0; + + if (tty->index == MAX_PORTS) { + if (cmd != MOXA_GETDATACOUNT && cmd != MOXA_GET_IOQUEUE && + cmd != MOXA_GETMSTATUS) + return -EINVAL; + } else if (!ch) + return -ENODEV; + + switch (cmd) { + case MOXA_GETDATACOUNT: + moxaLog.tick = jiffies; + if (copy_to_user(argp, &moxaLog, sizeof(moxaLog))) + ret = -EFAULT; + break; + case MOXA_FLUSH_QUEUE: + MoxaPortFlushData(ch, arg); + break; + case MOXA_GET_IOQUEUE: { + struct moxaq_str __user *argm = argp; + struct moxaq_str tmp; + struct moxa_port *p; + unsigned int i, j; + + for (i = 0; i < MAX_BOARDS; i++) { + p = moxa_boards[i].ports; + for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) { + memset(&tmp, 0, sizeof(tmp)); + spin_lock_bh(&moxa_lock); + if (moxa_boards[i].ready) { + tmp.inq = MoxaPortRxQueue(p); + tmp.outq = MoxaPortTxQueue(p); + } + spin_unlock_bh(&moxa_lock); + if (copy_to_user(argm, &tmp, sizeof(tmp))) + return -EFAULT; + } + } + break; + } case MOXA_GET_OQUEUE: + status = MoxaPortTxQueue(ch); + ret = put_user(status, (unsigned long __user *)argp); + break; + case MOXA_GET_IQUEUE: + status = MoxaPortRxQueue(ch); + ret = put_user(status, (unsigned long __user *)argp); + break; + case MOXA_GETMSTATUS: { + struct mxser_mstatus __user *argm = argp; + struct mxser_mstatus tmp; + struct moxa_port *p; + unsigned int i, j; + + for (i = 0; i < MAX_BOARDS; i++) { + p = moxa_boards[i].ports; + for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) { + struct tty_struct *ttyp; + memset(&tmp, 0, sizeof(tmp)); + spin_lock_bh(&moxa_lock); + if (!moxa_boards[i].ready) { + spin_unlock_bh(&moxa_lock); + goto copy; + } + + status = MoxaPortLineStatus(p); + spin_unlock_bh(&moxa_lock); + + if (status & 1) + tmp.cts = 1; + if (status & 2) + tmp.dsr = 1; + if (status & 4) + tmp.dcd = 1; + + ttyp = tty_port_tty_get(&p->port); + if (!ttyp || !ttyp->termios) + tmp.cflag = p->cflag; + else + tmp.cflag = ttyp->termios->c_cflag; + tty_kref_put(tty); +copy: + if (copy_to_user(argm, &tmp, sizeof(tmp))) + return -EFAULT; + } + } + break; + } + case TIOCGSERIAL: + mutex_lock(&ch->port.mutex); + ret = moxa_get_serial_info(ch, argp); + mutex_unlock(&ch->port.mutex); + break; + case TIOCSSERIAL: + mutex_lock(&ch->port.mutex); + ret = moxa_set_serial_info(ch, argp); + mutex_unlock(&ch->port.mutex); + break; + default: + ret = -ENOIOCTLCMD; + } + return ret; +} + +static int moxa_break_ctl(struct tty_struct *tty, int state) +{ + struct moxa_port *port = tty->driver_data; + + moxafunc(port->tableAddr, state ? FC_SendBreak : FC_StopBreak, + Magic_code); + return 0; +} + +static const struct tty_operations moxa_ops = { + .open = moxa_open, + .close = moxa_close, + .write = moxa_write, + .write_room = moxa_write_room, + .flush_buffer = moxa_flush_buffer, + .chars_in_buffer = moxa_chars_in_buffer, + .ioctl = moxa_ioctl, + .set_termios = moxa_set_termios, + .stop = moxa_stop, + .start = moxa_start, + .hangup = moxa_hangup, + .break_ctl = moxa_break_ctl, + .tiocmget = moxa_tiocmget, + .tiocmset = moxa_tiocmset, +}; + +static const struct tty_port_operations moxa_port_ops = { + .carrier_raised = moxa_carrier_raised, + .dtr_rts = moxa_dtr_rts, + .shutdown = moxa_shutdown, +}; + +static struct tty_driver *moxaDriver; +static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0); + +/* + * HW init + */ + +static int moxa_check_fw_model(struct moxa_board_conf *brd, u8 model) +{ + switch (brd->boardType) { + case MOXA_BOARD_C218_ISA: + case MOXA_BOARD_C218_PCI: + if (model != 1) + goto err; + break; + case MOXA_BOARD_CP204J: + if (model != 3) + goto err; + break; + default: + if (model != 2) + goto err; + break; + } + return 0; +err: + return -EINVAL; +} + +static int moxa_check_fw(const void *ptr) +{ + const __le16 *lptr = ptr; + + if (*lptr != cpu_to_le16(0x7980)) + return -EINVAL; + + return 0; +} + +static int moxa_load_bios(struct moxa_board_conf *brd, const u8 *buf, + size_t len) +{ + void __iomem *baseAddr = brd->basemem; + u16 tmp; + + writeb(HW_reset, baseAddr + Control_reg); /* reset */ + msleep(10); + memset_io(baseAddr, 0, 4096); + memcpy_toio(baseAddr, buf, len); /* download BIOS */ + writeb(0, baseAddr + Control_reg); /* restart */ + + msleep(2000); + + switch (brd->boardType) { + case MOXA_BOARD_C218_ISA: + case MOXA_BOARD_C218_PCI: + tmp = readw(baseAddr + C218_key); + if (tmp != C218_KeyCode) + goto err; + break; + case MOXA_BOARD_CP204J: + tmp = readw(baseAddr + C218_key); + if (tmp != CP204J_KeyCode) + goto err; + break; + default: + tmp = readw(baseAddr + C320_key); + if (tmp != C320_KeyCode) + goto err; + tmp = readw(baseAddr + C320_status); + if (tmp != STS_init) { + printk(KERN_ERR "MOXA: bios upload failed -- CPU/Basic " + "module not found\n"); + return -EIO; + } + break; + } + + return 0; +err: + printk(KERN_ERR "MOXA: bios upload failed -- board not found\n"); + return -EIO; +} + +static int moxa_load_320b(struct moxa_board_conf *brd, const u8 *ptr, + size_t len) +{ + void __iomem *baseAddr = brd->basemem; + + if (len < 7168) { + printk(KERN_ERR "MOXA: invalid 320 bios -- too short\n"); + return -EINVAL; + } + + writew(len - 7168 - 2, baseAddr + C320bapi_len); + writeb(1, baseAddr + Control_reg); /* Select Page 1 */ + memcpy_toio(baseAddr + DynPage_addr, ptr, 7168); + writeb(2, baseAddr + Control_reg); /* Select Page 2 */ + memcpy_toio(baseAddr + DynPage_addr, ptr + 7168, len - 7168); + + return 0; +} + +static int moxa_real_load_code(struct moxa_board_conf *brd, const void *ptr, + size_t len) +{ + void __iomem *baseAddr = brd->basemem; + const __le16 *uptr = ptr; + size_t wlen, len2, j; + unsigned long key, loadbuf, loadlen, checksum, checksum_ok; + unsigned int i, retry; + u16 usum, keycode; + + keycode = (brd->boardType == MOXA_BOARD_CP204J) ? CP204J_KeyCode : + C218_KeyCode; + + switch (brd->boardType) { + case MOXA_BOARD_CP204J: + case MOXA_BOARD_C218_ISA: + case MOXA_BOARD_C218_PCI: + key = C218_key; + loadbuf = C218_LoadBuf; + loadlen = C218DLoad_len; + checksum = C218check_sum; + checksum_ok = C218chksum_ok; + break; + default: + key = C320_key; + keycode = C320_KeyCode; + loadbuf = C320_LoadBuf; + loadlen = C320DLoad_len; + checksum = C320check_sum; + checksum_ok = C320chksum_ok; + break; + } + + usum = 0; + wlen = len >> 1; + for (i = 0; i < wlen; i++) + usum += le16_to_cpu(uptr[i]); + retry = 0; + do { + wlen = len >> 1; + j = 0; + while (wlen) { + len2 = (wlen > 2048) ? 2048 : wlen; + wlen -= len2; + memcpy_toio(baseAddr + loadbuf, ptr + j, len2 << 1); + j += len2 << 1; + + writew(len2, baseAddr + loadlen); + writew(0, baseAddr + key); + for (i = 0; i < 100; i++) { + if (readw(baseAddr + key) == keycode) + break; + msleep(10); + } + if (readw(baseAddr + key) != keycode) + return -EIO; + } + writew(0, baseAddr + loadlen); + writew(usum, baseAddr + checksum); + writew(0, baseAddr + key); + for (i = 0; i < 100; i++) { + if (readw(baseAddr + key) == keycode) + break; + msleep(10); + } + retry++; + } while ((readb(baseAddr + checksum_ok) != 1) && (retry < 3)); + if (readb(baseAddr + checksum_ok) != 1) + return -EIO; + + writew(0, baseAddr + key); + for (i = 0; i < 600; i++) { + if (readw(baseAddr + Magic_no) == Magic_code) + break; + msleep(10); + } + if (readw(baseAddr + Magic_no) != Magic_code) + return -EIO; + + if (MOXA_IS_320(brd)) { + if (brd->busType == MOXA_BUS_TYPE_PCI) { /* ASIC board */ + writew(0x3800, baseAddr + TMS320_PORT1); + writew(0x3900, baseAddr + TMS320_PORT2); + writew(28499, baseAddr + TMS320_CLOCK); + } else { + writew(0x3200, baseAddr + TMS320_PORT1); + writew(0x3400, baseAddr + TMS320_PORT2); + writew(19999, baseAddr + TMS320_CLOCK); + } + } + writew(1, baseAddr + Disable_IRQ); + writew(0, baseAddr + Magic_no); + for (i = 0; i < 500; i++) { + if (readw(baseAddr + Magic_no) == Magic_code) + break; + msleep(10); + } + if (readw(baseAddr + Magic_no) != Magic_code) + return -EIO; + + if (MOXA_IS_320(brd)) { + j = readw(baseAddr + Module_cnt); + if (j <= 0) + return -EIO; + brd->numPorts = j * 8; + writew(j, baseAddr + Module_no); + writew(0, baseAddr + Magic_no); + for (i = 0; i < 600; i++) { + if (readw(baseAddr + Magic_no) == Magic_code) + break; + msleep(10); + } + if (readw(baseAddr + Magic_no) != Magic_code) + return -EIO; + } + brd->intNdx = baseAddr + IRQindex; + brd->intPend = baseAddr + IRQpending; + brd->intTable = baseAddr + IRQtable; + + return 0; +} + +static int moxa_load_code(struct moxa_board_conf *brd, const void *ptr, + size_t len) +{ + void __iomem *ofsAddr, *baseAddr = brd->basemem; + struct moxa_port *port; + int retval, i; + + if (len % 2) { + printk(KERN_ERR "MOXA: bios length is not even\n"); + return -EINVAL; + } + + retval = moxa_real_load_code(brd, ptr, len); /* may change numPorts */ + if (retval) + return retval; + + switch (brd->boardType) { + case MOXA_BOARD_C218_ISA: + case MOXA_BOARD_C218_PCI: + case MOXA_BOARD_CP204J: + port = brd->ports; + for (i = 0; i < brd->numPorts; i++, port++) { + port->board = brd; + port->DCDState = 0; + port->tableAddr = baseAddr + Extern_table + + Extern_size * i; + ofsAddr = port->tableAddr; + writew(C218rx_mask, ofsAddr + RX_mask); + writew(C218tx_mask, ofsAddr + TX_mask); + writew(C218rx_spage + i * C218buf_pageno, ofsAddr + Page_rxb); + writew(readw(ofsAddr + Page_rxb) + C218rx_pageno, ofsAddr + EndPage_rxb); + + writew(C218tx_spage + i * C218buf_pageno, ofsAddr + Page_txb); + writew(readw(ofsAddr + Page_txb) + C218tx_pageno, ofsAddr + EndPage_txb); + + } + break; + default: + port = brd->ports; + for (i = 0; i < brd->numPorts; i++, port++) { + port->board = brd; + port->DCDState = 0; + port->tableAddr = baseAddr + Extern_table + + Extern_size * i; + ofsAddr = port->tableAddr; + switch (brd->numPorts) { + case 8: + writew(C320p8rx_mask, ofsAddr + RX_mask); + writew(C320p8tx_mask, ofsAddr + TX_mask); + writew(C320p8rx_spage + i * C320p8buf_pgno, ofsAddr + Page_rxb); + writew(readw(ofsAddr + Page_rxb) + C320p8rx_pgno, ofsAddr + EndPage_rxb); + writew(C320p8tx_spage + i * C320p8buf_pgno, ofsAddr + Page_txb); + writew(readw(ofsAddr + Page_txb) + C320p8tx_pgno, ofsAddr + EndPage_txb); + + break; + case 16: + writew(C320p16rx_mask, ofsAddr + RX_mask); + writew(C320p16tx_mask, ofsAddr + TX_mask); + writew(C320p16rx_spage + i * C320p16buf_pgno, ofsAddr + Page_rxb); + writew(readw(ofsAddr + Page_rxb) + C320p16rx_pgno, ofsAddr + EndPage_rxb); + writew(C320p16tx_spage + i * C320p16buf_pgno, ofsAddr + Page_txb); + writew(readw(ofsAddr + Page_txb) + C320p16tx_pgno, ofsAddr + EndPage_txb); + break; + + case 24: + writew(C320p24rx_mask, ofsAddr + RX_mask); + writew(C320p24tx_mask, ofsAddr + TX_mask); + writew(C320p24rx_spage + i * C320p24buf_pgno, ofsAddr + Page_rxb); + writew(readw(ofsAddr + Page_rxb) + C320p24rx_pgno, ofsAddr + EndPage_rxb); + writew(C320p24tx_spage + i * C320p24buf_pgno, ofsAddr + Page_txb); + writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb); + break; + case 32: + writew(C320p32rx_mask, ofsAddr + RX_mask); + writew(C320p32tx_mask, ofsAddr + TX_mask); + writew(C320p32tx_ofs, ofsAddr + Ofs_txb); + writew(C320p32rx_spage + i * C320p32buf_pgno, ofsAddr + Page_rxb); + writew(readb(ofsAddr + Page_rxb), ofsAddr + EndPage_rxb); + writew(C320p32tx_spage + i * C320p32buf_pgno, ofsAddr + Page_txb); + writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb); + break; + } + } + break; + } + return 0; +} + +static int moxa_load_fw(struct moxa_board_conf *brd, const struct firmware *fw) +{ + const void *ptr = fw->data; + char rsn[64]; + u16 lens[5]; + size_t len; + unsigned int a, lenp, lencnt; + int ret = -EINVAL; + struct { + __le32 magic; /* 0x34303430 */ + u8 reserved1[2]; + u8 type; /* UNIX = 3 */ + u8 model; /* C218T=1, C320T=2, CP204=3 */ + u8 reserved2[8]; + __le16 len[5]; + } const *hdr = ptr; + + BUILD_BUG_ON(ARRAY_SIZE(hdr->len) != ARRAY_SIZE(lens)); + + if (fw->size < MOXA_FW_HDRLEN) { + strcpy(rsn, "too short (even header won't fit)"); + goto err; + } + if (hdr->magic != cpu_to_le32(0x30343034)) { + sprintf(rsn, "bad magic: %.8x", le32_to_cpu(hdr->magic)); + goto err; + } + if (hdr->type != 3) { + sprintf(rsn, "not for linux, type is %u", hdr->type); + goto err; + } + if (moxa_check_fw_model(brd, hdr->model)) { + sprintf(rsn, "not for this card, model is %u", hdr->model); + goto err; + } + + len = MOXA_FW_HDRLEN; + lencnt = hdr->model == 2 ? 5 : 3; + for (a = 0; a < ARRAY_SIZE(lens); a++) { + lens[a] = le16_to_cpu(hdr->len[a]); + if (lens[a] && len + lens[a] <= fw->size && + moxa_check_fw(&fw->data[len])) + printk(KERN_WARNING "MOXA firmware: unexpected input " + "at offset %u, but going on\n", (u32)len); + if (!lens[a] && a < lencnt) { + sprintf(rsn, "too few entries in fw file"); + goto err; + } + len += lens[a]; + } + + if (len != fw->size) { + sprintf(rsn, "bad length: %u (should be %u)", (u32)fw->size, + (u32)len); + goto err; + } + + ptr += MOXA_FW_HDRLEN; + lenp = 0; /* bios */ + + strcpy(rsn, "read above"); + + ret = moxa_load_bios(brd, ptr, lens[lenp]); + if (ret) + goto err; + + /* we skip the tty section (lens[1]), since we don't need it */ + ptr += lens[lenp] + lens[lenp + 1]; + lenp += 2; /* comm */ + + if (hdr->model == 2) { + ret = moxa_load_320b(brd, ptr, lens[lenp]); + if (ret) + goto err; + /* skip another tty */ + ptr += lens[lenp] + lens[lenp + 1]; + lenp += 2; + } + + ret = moxa_load_code(brd, ptr, lens[lenp]); + if (ret) + goto err; + + return 0; +err: + printk(KERN_ERR "firmware failed to load, reason: %s\n", rsn); + return ret; +} + +static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev) +{ + const struct firmware *fw; + const char *file; + struct moxa_port *p; + unsigned int i; + int ret; + + brd->ports = kcalloc(MAX_PORTS_PER_BOARD, sizeof(*brd->ports), + GFP_KERNEL); + if (brd->ports == NULL) { + printk(KERN_ERR "cannot allocate memory for ports\n"); + ret = -ENOMEM; + goto err; + } + + for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) { + tty_port_init(&p->port); + p->port.ops = &moxa_port_ops; + p->type = PORT_16550A; + p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL; + } + + switch (brd->boardType) { + case MOXA_BOARD_C218_ISA: + case MOXA_BOARD_C218_PCI: + file = "c218tunx.cod"; + break; + case MOXA_BOARD_CP204J: + file = "cp204unx.cod"; + break; + default: + file = "c320tunx.cod"; + break; + } + + ret = request_firmware(&fw, file, dev); + if (ret) { + printk(KERN_ERR "MOXA: request_firmware failed. Make sure " + "you've placed '%s' file into your firmware " + "loader directory (e.g. /lib/firmware)\n", + file); + goto err_free; + } + + ret = moxa_load_fw(brd, fw); + + release_firmware(fw); + + if (ret) + goto err_free; + + spin_lock_bh(&moxa_lock); + brd->ready = 1; + if (!timer_pending(&moxaTimer)) + mod_timer(&moxaTimer, jiffies + HZ / 50); + spin_unlock_bh(&moxa_lock); + + return 0; +err_free: + kfree(brd->ports); +err: + return ret; +} + +static void moxa_board_deinit(struct moxa_board_conf *brd) +{ + unsigned int a, opened; + + mutex_lock(&moxa_openlock); + spin_lock_bh(&moxa_lock); + brd->ready = 0; + spin_unlock_bh(&moxa_lock); + + /* pci hot-un-plug support */ + for (a = 0; a < brd->numPorts; a++) + if (brd->ports[a].port.flags & ASYNC_INITIALIZED) { + struct tty_struct *tty = tty_port_tty_get( + &brd->ports[a].port); + if (tty) { + tty_hangup(tty); + tty_kref_put(tty); + } + } + while (1) { + opened = 0; + for (a = 0; a < brd->numPorts; a++) + if (brd->ports[a].port.flags & ASYNC_INITIALIZED) + opened++; + mutex_unlock(&moxa_openlock); + if (!opened) + break; + msleep(50); + mutex_lock(&moxa_openlock); + } + + iounmap(brd->basemem); + brd->basemem = NULL; + kfree(brd->ports); +} + +#ifdef CONFIG_PCI +static int __devinit moxa_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct moxa_board_conf *board; + unsigned int i; + int board_type = ent->driver_data; + int retval; + + retval = pci_enable_device(pdev); + if (retval) { + dev_err(&pdev->dev, "can't enable pci device\n"); + goto err; + } + + for (i = 0; i < MAX_BOARDS; i++) + if (moxa_boards[i].basemem == NULL) + break; + + retval = -ENODEV; + if (i >= MAX_BOARDS) { + dev_warn(&pdev->dev, "more than %u MOXA Intellio family boards " + "found. Board is ignored.\n", MAX_BOARDS); + goto err; + } + + board = &moxa_boards[i]; + + retval = pci_request_region(pdev, 2, "moxa-base"); + if (retval) { + dev_err(&pdev->dev, "can't request pci region 2\n"); + goto err; + } + + board->basemem = ioremap_nocache(pci_resource_start(pdev, 2), 0x4000); + if (board->basemem == NULL) { + dev_err(&pdev->dev, "can't remap io space 2\n"); + goto err_reg; + } + + board->boardType = board_type; + switch (board_type) { + case MOXA_BOARD_C218_ISA: + case MOXA_BOARD_C218_PCI: + board->numPorts = 8; + break; + + case MOXA_BOARD_CP204J: + board->numPorts = 4; + break; + default: + board->numPorts = 0; + break; + } + board->busType = MOXA_BUS_TYPE_PCI; + + retval = moxa_init_board(board, &pdev->dev); + if (retval) + goto err_base; + + pci_set_drvdata(pdev, board); + + dev_info(&pdev->dev, "board '%s' ready (%u ports, firmware loaded)\n", + moxa_brdname[board_type - 1], board->numPorts); + + return 0; +err_base: + iounmap(board->basemem); + board->basemem = NULL; +err_reg: + pci_release_region(pdev, 2); +err: + return retval; +} + +static void __devexit moxa_pci_remove(struct pci_dev *pdev) +{ + struct moxa_board_conf *brd = pci_get_drvdata(pdev); + + moxa_board_deinit(brd); + + pci_release_region(pdev, 2); +} + +static struct pci_driver moxa_pci_driver = { + .name = "moxa", + .id_table = moxa_pcibrds, + .probe = moxa_pci_probe, + .remove = __devexit_p(moxa_pci_remove) +}; +#endif /* CONFIG_PCI */ + +static int __init moxa_init(void) +{ + unsigned int isabrds = 0; + int retval = 0; + struct moxa_board_conf *brd = moxa_boards; + unsigned int i; + + printk(KERN_INFO "MOXA Intellio family driver version %s\n", + MOXA_VERSION); + moxaDriver = alloc_tty_driver(MAX_PORTS + 1); + if (!moxaDriver) + return -ENOMEM; + + moxaDriver->owner = THIS_MODULE; + moxaDriver->name = "ttyMX"; + moxaDriver->major = ttymajor; + moxaDriver->minor_start = 0; + moxaDriver->type = TTY_DRIVER_TYPE_SERIAL; + moxaDriver->subtype = SERIAL_TYPE_NORMAL; + moxaDriver->init_termios = tty_std_termios; + moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL; + moxaDriver->init_termios.c_ispeed = 9600; + moxaDriver->init_termios.c_ospeed = 9600; + moxaDriver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(moxaDriver, &moxa_ops); + + if (tty_register_driver(moxaDriver)) { + printk(KERN_ERR "can't register MOXA Smartio tty driver!\n"); + put_tty_driver(moxaDriver); + return -1; + } + + /* Find the boards defined from module args. */ + + for (i = 0; i < MAX_BOARDS; i++) { + if (!baseaddr[i]) + break; + if (type[i] == MOXA_BOARD_C218_ISA || + type[i] == MOXA_BOARD_C320_ISA) { + pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n", + isabrds + 1, moxa_brdname[type[i] - 1], + baseaddr[i]); + brd->boardType = type[i]; + brd->numPorts = type[i] == MOXA_BOARD_C218_ISA ? 8 : + numports[i]; + brd->busType = MOXA_BUS_TYPE_ISA; + brd->basemem = ioremap_nocache(baseaddr[i], 0x4000); + if (!brd->basemem) { + printk(KERN_ERR "MOXA: can't remap %lx\n", + baseaddr[i]); + continue; + } + if (moxa_init_board(brd, NULL)) { + iounmap(brd->basemem); + brd->basemem = NULL; + continue; + } + + printk(KERN_INFO "MOXA isa board found at 0x%.8lu and " + "ready (%u ports, firmware loaded)\n", + baseaddr[i], brd->numPorts); + + brd++; + isabrds++; + } + } + +#ifdef CONFIG_PCI + retval = pci_register_driver(&moxa_pci_driver); + if (retval) { + printk(KERN_ERR "Can't register MOXA pci driver!\n"); + if (isabrds) + retval = 0; + } +#endif + + return retval; +} + +static void __exit moxa_exit(void) +{ + unsigned int i; + +#ifdef CONFIG_PCI + pci_unregister_driver(&moxa_pci_driver); +#endif + + for (i = 0; i < MAX_BOARDS; i++) /* ISA boards */ + if (moxa_boards[i].ready) + moxa_board_deinit(&moxa_boards[i]); + + del_timer_sync(&moxaTimer); + + if (tty_unregister_driver(moxaDriver)) + printk(KERN_ERR "Couldn't unregister MOXA Intellio family " + "serial driver\n"); + put_tty_driver(moxaDriver); +} + +module_init(moxa_init); +module_exit(moxa_exit); + +static void moxa_shutdown(struct tty_port *port) +{ + struct moxa_port *ch = container_of(port, struct moxa_port, port); + MoxaPortDisable(ch); + MoxaPortFlushData(ch, 2); + clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); +} + +static int moxa_carrier_raised(struct tty_port *port) +{ + struct moxa_port *ch = container_of(port, struct moxa_port, port); + int dcd; + + spin_lock_irq(&port->lock); + dcd = ch->DCDState; + spin_unlock_irq(&port->lock); + return dcd; +} + +static void moxa_dtr_rts(struct tty_port *port, int onoff) +{ + struct moxa_port *ch = container_of(port, struct moxa_port, port); + MoxaPortLineCtrl(ch, onoff, onoff); +} + + +static int moxa_open(struct tty_struct *tty, struct file *filp) +{ + struct moxa_board_conf *brd; + struct moxa_port *ch; + int port; + int retval; + + port = tty->index; + if (port == MAX_PORTS) { + return capable(CAP_SYS_ADMIN) ? 0 : -EPERM; + } + if (mutex_lock_interruptible(&moxa_openlock)) + return -ERESTARTSYS; + brd = &moxa_boards[port / MAX_PORTS_PER_BOARD]; + if (!brd->ready) { + mutex_unlock(&moxa_openlock); + return -ENODEV; + } + + if (port % MAX_PORTS_PER_BOARD >= brd->numPorts) { + mutex_unlock(&moxa_openlock); + return -ENODEV; + } + + ch = &brd->ports[port % MAX_PORTS_PER_BOARD]; + ch->port.count++; + tty->driver_data = ch; + tty_port_tty_set(&ch->port, tty); + mutex_lock(&ch->port.mutex); + if (!(ch->port.flags & ASYNC_INITIALIZED)) { + ch->statusflags = 0; + moxa_set_tty_param(tty, tty->termios); + MoxaPortLineCtrl(ch, 1, 1); + MoxaPortEnable(ch); + MoxaSetFifo(ch, ch->type == PORT_16550A); + ch->port.flags |= ASYNC_INITIALIZED; + } + mutex_unlock(&ch->port.mutex); + mutex_unlock(&moxa_openlock); + + retval = tty_port_block_til_ready(&ch->port, tty, filp); + if (retval == 0) + set_bit(ASYNCB_NORMAL_ACTIVE, &ch->port.flags); + return retval; +} + +static void moxa_close(struct tty_struct *tty, struct file *filp) +{ + struct moxa_port *ch = tty->driver_data; + ch->cflag = tty->termios->c_cflag; + tty_port_close(&ch->port, tty, filp); +} + +static int moxa_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + struct moxa_port *ch = tty->driver_data; + int len; + + if (ch == NULL) + return 0; + + spin_lock_bh(&moxa_lock); + len = MoxaPortWriteData(tty, buf, count); + spin_unlock_bh(&moxa_lock); + + set_bit(LOWWAIT, &ch->statusflags); + return len; +} + +static int moxa_write_room(struct tty_struct *tty) +{ + struct moxa_port *ch; + + if (tty->stopped) + return 0; + ch = tty->driver_data; + if (ch == NULL) + return 0; + return MoxaPortTxFree(ch); +} + +static void moxa_flush_buffer(struct tty_struct *tty) +{ + struct moxa_port *ch = tty->driver_data; + + if (ch == NULL) + return; + MoxaPortFlushData(ch, 1); + tty_wakeup(tty); +} + +static int moxa_chars_in_buffer(struct tty_struct *tty) +{ + struct moxa_port *ch = tty->driver_data; + int chars; + + chars = MoxaPortTxQueue(ch); + if (chars) + /* + * Make it possible to wakeup anything waiting for output + * in tty_ioctl.c, etc. + */ + set_bit(EMPTYWAIT, &ch->statusflags); + return chars; +} + +static int moxa_tiocmget(struct tty_struct *tty) +{ + struct moxa_port *ch = tty->driver_data; + int flag = 0, dtr, rts; + + MoxaPortGetLineOut(ch, &dtr, &rts); + if (dtr) + flag |= TIOCM_DTR; + if (rts) + flag |= TIOCM_RTS; + dtr = MoxaPortLineStatus(ch); + if (dtr & 1) + flag |= TIOCM_CTS; + if (dtr & 2) + flag |= TIOCM_DSR; + if (dtr & 4) + flag |= TIOCM_CD; + return flag; +} + +static int moxa_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct moxa_port *ch; + int port; + int dtr, rts; + + port = tty->index; + mutex_lock(&moxa_openlock); + ch = tty->driver_data; + if (!ch) { + mutex_unlock(&moxa_openlock); + return -EINVAL; + } + + MoxaPortGetLineOut(ch, &dtr, &rts); + if (set & TIOCM_RTS) + rts = 1; + if (set & TIOCM_DTR) + dtr = 1; + if (clear & TIOCM_RTS) + rts = 0; + if (clear & TIOCM_DTR) + dtr = 0; + MoxaPortLineCtrl(ch, dtr, rts); + mutex_unlock(&moxa_openlock); + return 0; +} + +static void moxa_set_termios(struct tty_struct *tty, + struct ktermios *old_termios) +{ + struct moxa_port *ch = tty->driver_data; + + if (ch == NULL) + return; + moxa_set_tty_param(tty, old_termios); + if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty)) + wake_up_interruptible(&ch->port.open_wait); +} + +static void moxa_stop(struct tty_struct *tty) +{ + struct moxa_port *ch = tty->driver_data; + + if (ch == NULL) + return; + MoxaPortTxDisable(ch); + set_bit(TXSTOPPED, &ch->statusflags); +} + + +static void moxa_start(struct tty_struct *tty) +{ + struct moxa_port *ch = tty->driver_data; + + if (ch == NULL) + return; + + if (!(ch->statusflags & TXSTOPPED)) + return; + + MoxaPortTxEnable(ch); + clear_bit(TXSTOPPED, &ch->statusflags); +} + +static void moxa_hangup(struct tty_struct *tty) +{ + struct moxa_port *ch = tty->driver_data; + tty_port_hangup(&ch->port); +} + +static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd) +{ + struct tty_struct *tty; + unsigned long flags; + dcd = !!dcd; + + spin_lock_irqsave(&p->port.lock, flags); + if (dcd != p->DCDState) { + p->DCDState = dcd; + spin_unlock_irqrestore(&p->port.lock, flags); + tty = tty_port_tty_get(&p->port); + if (tty && C_CLOCAL(tty) && !dcd) + tty_hangup(tty); + tty_kref_put(tty); + } + else + spin_unlock_irqrestore(&p->port.lock, flags); +} + +static int moxa_poll_port(struct moxa_port *p, unsigned int handle, + u16 __iomem *ip) +{ + struct tty_struct *tty = tty_port_tty_get(&p->port); + void __iomem *ofsAddr; + unsigned int inited = p->port.flags & ASYNC_INITIALIZED; + u16 intr; + + if (tty) { + if (test_bit(EMPTYWAIT, &p->statusflags) && + MoxaPortTxQueue(p) == 0) { + clear_bit(EMPTYWAIT, &p->statusflags); + tty_wakeup(tty); + } + if (test_bit(LOWWAIT, &p->statusflags) && !tty->stopped && + MoxaPortTxQueue(p) <= WAKEUP_CHARS) { + clear_bit(LOWWAIT, &p->statusflags); + tty_wakeup(tty); + } + + if (inited && !test_bit(TTY_THROTTLED, &tty->flags) && + MoxaPortRxQueue(p) > 0) { /* RX */ + MoxaPortReadData(p); + tty_schedule_flip(tty); + } + } else { + clear_bit(EMPTYWAIT, &p->statusflags); + MoxaPortFlushData(p, 0); /* flush RX */ + } + + if (!handle) /* nothing else to do */ + goto put; + + intr = readw(ip); /* port irq status */ + if (intr == 0) + goto put; + + writew(0, ip); /* ACK port */ + ofsAddr = p->tableAddr; + if (intr & IntrTx) /* disable tx intr */ + writew(readw(ofsAddr + HostStat) & ~WakeupTx, + ofsAddr + HostStat); + + if (!inited) + goto put; + + if (tty && (intr & IntrBreak) && !I_IGNBRK(tty)) { /* BREAK */ + tty_insert_flip_char(tty, 0, TTY_BREAK); + tty_schedule_flip(tty); + } + + if (intr & IntrLine) + moxa_new_dcdstate(p, readb(ofsAddr + FlagStat) & DCD_state); +put: + tty_kref_put(tty); + + return 0; +} + +static void moxa_poll(unsigned long ignored) +{ + struct moxa_board_conf *brd; + u16 __iomem *ip; + unsigned int card, port, served = 0; + + spin_lock(&moxa_lock); + for (card = 0; card < MAX_BOARDS; card++) { + brd = &moxa_boards[card]; + if (!brd->ready) + continue; + + served++; + + ip = NULL; + if (readb(brd->intPend) == 0xff) + ip = brd->intTable + readb(brd->intNdx); + + for (port = 0; port < brd->numPorts; port++) + moxa_poll_port(&brd->ports[port], !!ip, ip + port); + + if (ip) + writeb(0, brd->intPend); /* ACK */ + + if (moxaLowWaterChk) { + struct moxa_port *p = brd->ports; + for (port = 0; port < brd->numPorts; port++, p++) + if (p->lowChkFlag) { + p->lowChkFlag = 0; + moxa_low_water_check(p->tableAddr); + } + } + } + moxaLowWaterChk = 0; + + if (served) + mod_timer(&moxaTimer, jiffies + HZ / 50); + spin_unlock(&moxa_lock); +} + +/******************************************************************************/ + +static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios) +{ + register struct ktermios *ts = tty->termios; + struct moxa_port *ch = tty->driver_data; + int rts, cts, txflow, rxflow, xany, baud; + + rts = cts = txflow = rxflow = xany = 0; + if (ts->c_cflag & CRTSCTS) + rts = cts = 1; + if (ts->c_iflag & IXON) + txflow = 1; + if (ts->c_iflag & IXOFF) + rxflow = 1; + if (ts->c_iflag & IXANY) + xany = 1; + + /* Clear the features we don't support */ + ts->c_cflag &= ~CMSPAR; + MoxaPortFlowCtrl(ch, rts, cts, txflow, rxflow, xany); + baud = MoxaPortSetTermio(ch, ts, tty_get_baud_rate(tty)); + if (baud == -1) + baud = tty_termios_baud_rate(old_termios); + /* Not put the baud rate into the termios data */ + tty_encode_baud_rate(tty, baud, baud); +} + +/***************************************************************************** + * Driver level functions: * + *****************************************************************************/ + +static void MoxaPortFlushData(struct moxa_port *port, int mode) +{ + void __iomem *ofsAddr; + if (mode < 0 || mode > 2) + return; + ofsAddr = port->tableAddr; + moxafunc(ofsAddr, FC_FlushQueue, mode); + if (mode != 1) { + port->lowChkFlag = 0; + moxa_low_water_check(ofsAddr); + } +} + +/* + * Moxa Port Number Description: + * + * MOXA serial driver supports up to 4 MOXA-C218/C320 boards. And, + * the port number using in MOXA driver functions will be 0 to 31 for + * first MOXA board, 32 to 63 for second, 64 to 95 for third and 96 + * to 127 for fourth. For example, if you setup three MOXA boards, + * first board is C218, second board is C320-16 and third board is + * C320-32. The port number of first board (C218 - 8 ports) is from + * 0 to 7. The port number of second board (C320 - 16 ports) is form + * 32 to 47. The port number of third board (C320 - 32 ports) is from + * 64 to 95. And those port numbers form 8 to 31, 48 to 63 and 96 to + * 127 will be invalid. + * + * + * Moxa Functions Description: + * + * Function 1: Driver initialization routine, this routine must be + * called when initialized driver. + * Syntax: + * void MoxaDriverInit(); + * + * + * Function 2: Moxa driver private IOCTL command processing. + * Syntax: + * int MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port); + * + * unsigned int cmd : IOCTL command + * unsigned long arg : IOCTL argument + * int port : port number (0 - 127) + * + * return: 0 (OK) + * -EINVAL + * -ENOIOCTLCMD + * + * + * Function 6: Enable this port to start Tx/Rx data. + * Syntax: + * void MoxaPortEnable(int port); + * int port : port number (0 - 127) + * + * + * Function 7: Disable this port + * Syntax: + * void MoxaPortDisable(int port); + * int port : port number (0 - 127) + * + * + * Function 10: Setting baud rate of this port. + * Syntax: + * speed_t MoxaPortSetBaud(int port, speed_t baud); + * int port : port number (0 - 127) + * long baud : baud rate (50 - 115200) + * + * return: 0 : this port is invalid or baud < 50 + * 50 - 115200 : the real baud rate set to the port, if + * the argument baud is large than maximun + * available baud rate, the real setting + * baud rate will be the maximun baud rate. + * + * + * Function 12: Configure the port. + * Syntax: + * int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud); + * int port : port number (0 - 127) + * struct ktermios * termio : termio structure pointer + * speed_t baud : baud rate + * + * return: -1 : this port is invalid or termio == NULL + * 0 : setting O.K. + * + * + * Function 13: Get the DTR/RTS state of this port. + * Syntax: + * int MoxaPortGetLineOut(int port, int *dtrState, int *rtsState); + * int port : port number (0 - 127) + * int * dtrState : pointer to INT to receive the current DTR + * state. (if NULL, this function will not + * write to this address) + * int * rtsState : pointer to INT to receive the current RTS + * state. (if NULL, this function will not + * write to this address) + * + * return: -1 : this port is invalid + * 0 : O.K. + * + * + * Function 14: Setting the DTR/RTS output state of this port. + * Syntax: + * void MoxaPortLineCtrl(int port, int dtrState, int rtsState); + * int port : port number (0 - 127) + * int dtrState : DTR output state (0: off, 1: on) + * int rtsState : RTS output state (0: off, 1: on) + * + * + * Function 15: Setting the flow control of this port. + * Syntax: + * void MoxaPortFlowCtrl(int port, int rtsFlow, int ctsFlow, int rxFlow, + * int txFlow,int xany); + * int port : port number (0 - 127) + * int rtsFlow : H/W RTS flow control (0: no, 1: yes) + * int ctsFlow : H/W CTS flow control (0: no, 1: yes) + * int rxFlow : S/W Rx XON/XOFF flow control (0: no, 1: yes) + * int txFlow : S/W Tx XON/XOFF flow control (0: no, 1: yes) + * int xany : S/W XANY flow control (0: no, 1: yes) + * + * + * Function 16: Get ths line status of this port + * Syntax: + * int MoxaPortLineStatus(int port); + * int port : port number (0 - 127) + * + * return: Bit 0 - CTS state (0: off, 1: on) + * Bit 1 - DSR state (0: off, 1: on) + * Bit 2 - DCD state (0: off, 1: on) + * + * + * Function 19: Flush the Rx/Tx buffer data of this port. + * Syntax: + * void MoxaPortFlushData(int port, int mode); + * int port : port number (0 - 127) + * int mode + * 0 : flush the Rx buffer + * 1 : flush the Tx buffer + * 2 : flush the Rx and Tx buffer + * + * + * Function 20: Write data. + * Syntax: + * int MoxaPortWriteData(int port, unsigned char * buffer, int length); + * int port : port number (0 - 127) + * unsigned char * buffer : pointer to write data buffer. + * int length : write data length + * + * return: 0 - length : real write data length + * + * + * Function 21: Read data. + * Syntax: + * int MoxaPortReadData(int port, struct tty_struct *tty); + * int port : port number (0 - 127) + * struct tty_struct *tty : tty for data + * + * return: 0 - length : real read data length + * + * + * Function 24: Get the Tx buffer current queued data bytes + * Syntax: + * int MoxaPortTxQueue(int port); + * int port : port number (0 - 127) + * + * return: .. : Tx buffer current queued data bytes + * + * + * Function 25: Get the Tx buffer current free space + * Syntax: + * int MoxaPortTxFree(int port); + * int port : port number (0 - 127) + * + * return: .. : Tx buffer current free space + * + * + * Function 26: Get the Rx buffer current queued data bytes + * Syntax: + * int MoxaPortRxQueue(int port); + * int port : port number (0 - 127) + * + * return: .. : Rx buffer current queued data bytes + * + * + * Function 28: Disable port data transmission. + * Syntax: + * void MoxaPortTxDisable(int port); + * int port : port number (0 - 127) + * + * + * Function 29: Enable port data transmission. + * Syntax: + * void MoxaPortTxEnable(int port); + * int port : port number (0 - 127) + * + * + * Function 31: Get the received BREAK signal count and reset it. + * Syntax: + * int MoxaPortResetBrkCnt(int port); + * int port : port number (0 - 127) + * + * return: 0 - .. : BREAK signal count + * + * + */ + +static void MoxaPortEnable(struct moxa_port *port) +{ + void __iomem *ofsAddr; + u16 lowwater = 512; + + ofsAddr = port->tableAddr; + writew(lowwater, ofsAddr + Low_water); + if (MOXA_IS_320(port->board)) + moxafunc(ofsAddr, FC_SetBreakIrq, 0); + else + writew(readw(ofsAddr + HostStat) | WakeupBreak, + ofsAddr + HostStat); + + moxafunc(ofsAddr, FC_SetLineIrq, Magic_code); + moxafunc(ofsAddr, FC_FlushQueue, 2); + + moxafunc(ofsAddr, FC_EnableCH, Magic_code); + MoxaPortLineStatus(port); +} + +static void MoxaPortDisable(struct moxa_port *port) +{ + void __iomem *ofsAddr = port->tableAddr; + + moxafunc(ofsAddr, FC_SetFlowCtl, 0); /* disable flow control */ + moxafunc(ofsAddr, FC_ClrLineIrq, Magic_code); + writew(0, ofsAddr + HostStat); + moxafunc(ofsAddr, FC_DisableCH, Magic_code); +} + +static speed_t MoxaPortSetBaud(struct moxa_port *port, speed_t baud) +{ + void __iomem *ofsAddr = port->tableAddr; + unsigned int clock, val; + speed_t max; + + max = MOXA_IS_320(port->board) ? 460800 : 921600; + if (baud < 50) + return 0; + if (baud > max) + baud = max; + clock = 921600; + val = clock / baud; + moxafunc(ofsAddr, FC_SetBaud, val); + baud = clock / val; + return baud; +} + +static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio, + speed_t baud) +{ + void __iomem *ofsAddr; + tcflag_t cflag; + tcflag_t mode = 0; + + ofsAddr = port->tableAddr; + cflag = termio->c_cflag; /* termio->c_cflag */ + + mode = termio->c_cflag & CSIZE; + if (mode == CS5) + mode = MX_CS5; + else if (mode == CS6) + mode = MX_CS6; + else if (mode == CS7) + mode = MX_CS7; + else if (mode == CS8) + mode = MX_CS8; + + if (termio->c_cflag & CSTOPB) { + if (mode == MX_CS5) + mode |= MX_STOP15; + else + mode |= MX_STOP2; + } else + mode |= MX_STOP1; + + if (termio->c_cflag & PARENB) { + if (termio->c_cflag & PARODD) + mode |= MX_PARODD; + else + mode |= MX_PAREVEN; + } else + mode |= MX_PARNONE; + + moxafunc(ofsAddr, FC_SetDataMode, (u16)mode); + + if (MOXA_IS_320(port->board) && baud >= 921600) + return -1; + + baud = MoxaPortSetBaud(port, baud); + + if (termio->c_iflag & (IXON | IXOFF | IXANY)) { + spin_lock_irq(&moxafunc_lock); + writeb(termio->c_cc[VSTART], ofsAddr + FuncArg); + writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1); + writeb(FC_SetXonXoff, ofsAddr + FuncCode); + moxa_wait_finish(ofsAddr); + spin_unlock_irq(&moxafunc_lock); + + } + return baud; +} + +static int MoxaPortGetLineOut(struct moxa_port *port, int *dtrState, + int *rtsState) +{ + if (dtrState) + *dtrState = !!(port->lineCtrl & DTR_ON); + if (rtsState) + *rtsState = !!(port->lineCtrl & RTS_ON); + + return 0; +} + +static void MoxaPortLineCtrl(struct moxa_port *port, int dtr, int rts) +{ + u8 mode = 0; + + if (dtr) + mode |= DTR_ON; + if (rts) + mode |= RTS_ON; + port->lineCtrl = mode; + moxafunc(port->tableAddr, FC_LineControl, mode); +} + +static void MoxaPortFlowCtrl(struct moxa_port *port, int rts, int cts, + int txflow, int rxflow, int txany) +{ + int mode = 0; + + if (rts) + mode |= RTS_FlowCtl; + if (cts) + mode |= CTS_FlowCtl; + if (txflow) + mode |= Tx_FlowCtl; + if (rxflow) + mode |= Rx_FlowCtl; + if (txany) + mode |= IXM_IXANY; + moxafunc(port->tableAddr, FC_SetFlowCtl, mode); +} + +static int MoxaPortLineStatus(struct moxa_port *port) +{ + void __iomem *ofsAddr; + int val; + + ofsAddr = port->tableAddr; + if (MOXA_IS_320(port->board)) + val = moxafuncret(ofsAddr, FC_LineStatus, 0); + else + val = readw(ofsAddr + FlagStat) >> 4; + val &= 0x0B; + if (val & 8) + val |= 4; + moxa_new_dcdstate(port, val & 8); + val &= 7; + return val; +} + +static int MoxaPortWriteData(struct tty_struct *tty, + const unsigned char *buffer, int len) +{ + struct moxa_port *port = tty->driver_data; + void __iomem *baseAddr, *ofsAddr, *ofs; + unsigned int c, total; + u16 head, tail, tx_mask, spage, epage; + u16 pageno, pageofs, bufhead; + + ofsAddr = port->tableAddr; + baseAddr = port->board->basemem; + tx_mask = readw(ofsAddr + TX_mask); + spage = readw(ofsAddr + Page_txb); + epage = readw(ofsAddr + EndPage_txb); + tail = readw(ofsAddr + TXwptr); + head = readw(ofsAddr + TXrptr); + c = (head > tail) ? (head - tail - 1) : (head - tail + tx_mask); + if (c > len) + c = len; + moxaLog.txcnt[port->port.tty->index] += c; + total = c; + if (spage == epage) { + bufhead = readw(ofsAddr + Ofs_txb); + writew(spage, baseAddr + Control_reg); + while (c > 0) { + if (head > tail) + len = head - tail - 1; + else + len = tx_mask + 1 - tail; + len = (c > len) ? len : c; + ofs = baseAddr + DynPage_addr + bufhead + tail; + memcpy_toio(ofs, buffer, len); + buffer += len; + tail = (tail + len) & tx_mask; + c -= len; + } + } else { + pageno = spage + (tail >> 13); + pageofs = tail & Page_mask; + while (c > 0) { + len = Page_size - pageofs; + if (len > c) + len = c; + writeb(pageno, baseAddr + Control_reg); + ofs = baseAddr + DynPage_addr + pageofs; + memcpy_toio(ofs, buffer, len); + buffer += len; + if (++pageno == epage) + pageno = spage; + pageofs = 0; + c -= len; + } + tail = (tail + total) & tx_mask; + } + writew(tail, ofsAddr + TXwptr); + writeb(1, ofsAddr + CD180TXirq); /* start to send */ + return total; +} + +static int MoxaPortReadData(struct moxa_port *port) +{ + struct tty_struct *tty = port->port.tty; + unsigned char *dst; + void __iomem *baseAddr, *ofsAddr, *ofs; + unsigned int count, len, total; + u16 tail, rx_mask, spage, epage; + u16 pageno, pageofs, bufhead, head; + + ofsAddr = port->tableAddr; + baseAddr = port->board->basemem; + head = readw(ofsAddr + RXrptr); + tail = readw(ofsAddr + RXwptr); + rx_mask = readw(ofsAddr + RX_mask); + spage = readw(ofsAddr + Page_rxb); + epage = readw(ofsAddr + EndPage_rxb); + count = (tail >= head) ? (tail - head) : (tail - head + rx_mask + 1); + if (count == 0) + return 0; + + total = count; + moxaLog.rxcnt[tty->index] += total; + if (spage == epage) { + bufhead = readw(ofsAddr + Ofs_rxb); + writew(spage, baseAddr + Control_reg); + while (count > 0) { + ofs = baseAddr + DynPage_addr + bufhead + head; + len = (tail >= head) ? (tail - head) : + (rx_mask + 1 - head); + len = tty_prepare_flip_string(tty, &dst, + min(len, count)); + memcpy_fromio(dst, ofs, len); + head = (head + len) & rx_mask; + count -= len; + } + } else { + pageno = spage + (head >> 13); + pageofs = head & Page_mask; + while (count > 0) { + writew(pageno, baseAddr + Control_reg); + ofs = baseAddr + DynPage_addr + pageofs; + len = tty_prepare_flip_string(tty, &dst, + min(Page_size - pageofs, count)); + memcpy_fromio(dst, ofs, len); + + count -= len; + pageofs = (pageofs + len) & Page_mask; + if (pageofs == 0 && ++pageno == epage) + pageno = spage; + } + head = (head + total) & rx_mask; + } + writew(head, ofsAddr + RXrptr); + if (readb(ofsAddr + FlagStat) & Xoff_state) { + moxaLowWaterChk = 1; + port->lowChkFlag = 1; + } + return total; +} + + +static int MoxaPortTxQueue(struct moxa_port *port) +{ + void __iomem *ofsAddr = port->tableAddr; + u16 rptr, wptr, mask; + + rptr = readw(ofsAddr + TXrptr); + wptr = readw(ofsAddr + TXwptr); + mask = readw(ofsAddr + TX_mask); + return (wptr - rptr) & mask; +} + +static int MoxaPortTxFree(struct moxa_port *port) +{ + void __iomem *ofsAddr = port->tableAddr; + u16 rptr, wptr, mask; + + rptr = readw(ofsAddr + TXrptr); + wptr = readw(ofsAddr + TXwptr); + mask = readw(ofsAddr + TX_mask); + return mask - ((wptr - rptr) & mask); +} + +static int MoxaPortRxQueue(struct moxa_port *port) +{ + void __iomem *ofsAddr = port->tableAddr; + u16 rptr, wptr, mask; + + rptr = readw(ofsAddr + RXrptr); + wptr = readw(ofsAddr + RXwptr); + mask = readw(ofsAddr + RX_mask); + return (wptr - rptr) & mask; +} + +static void MoxaPortTxDisable(struct moxa_port *port) +{ + moxafunc(port->tableAddr, FC_SetXoffState, Magic_code); +} + +static void MoxaPortTxEnable(struct moxa_port *port) +{ + moxafunc(port->tableAddr, FC_SetXonState, Magic_code); +} + +static int moxa_get_serial_info(struct moxa_port *info, + struct serial_struct __user *retinfo) +{ + struct serial_struct tmp = { + .type = info->type, + .line = info->port.tty->index, + .flags = info->port.flags, + .baud_base = 921600, + .close_delay = info->port.close_delay + }; + return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0; +} + + +static int moxa_set_serial_info(struct moxa_port *info, + struct serial_struct __user *new_info) +{ + struct serial_struct new_serial; + + if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) + return -EFAULT; + + if (new_serial.irq != 0 || new_serial.port != 0 || + new_serial.custom_divisor != 0 || + new_serial.baud_base != 921600) + return -EPERM; + + if (!capable(CAP_SYS_ADMIN)) { + if (((new_serial.flags & ~ASYNC_USR_MASK) != + (info->port.flags & ~ASYNC_USR_MASK))) + return -EPERM; + } else + info->port.close_delay = new_serial.close_delay * HZ / 100; + + new_serial.flags = (new_serial.flags & ~ASYNC_FLAGS); + new_serial.flags |= (info->port.flags & ASYNC_FLAGS); + + MoxaSetFifo(info, new_serial.type == PORT_16550A); + + info->type = new_serial.type; + return 0; +} + + + +/***************************************************************************** + * Static local functions: * + *****************************************************************************/ + +static void MoxaSetFifo(struct moxa_port *port, int enable) +{ + void __iomem *ofsAddr = port->tableAddr; + + if (!enable) { + moxafunc(ofsAddr, FC_SetRxFIFOTrig, 0); + moxafunc(ofsAddr, FC_SetTxFIFOCnt, 1); + } else { + moxafunc(ofsAddr, FC_SetRxFIFOTrig, 3); + moxafunc(ofsAddr, FC_SetTxFIFOCnt, 16); + } +} |
