diff options
Diffstat (limited to 'drivers/scsi')
43 files changed, 662 insertions, 1233 deletions
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 6141389dcdb2..2e6129f13d38 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -115,7 +115,6 @@ obj-$(CONFIG_SCSI_QLOGICPTI) += qlogicpti.o obj-$(CONFIG_BLK_DEV_IDESCSI) += ide-scsi.o obj-$(CONFIG_SCSI_MESH) += mesh.o obj-$(CONFIG_SCSI_MAC53C94) += mac53c94.o -obj-$(CONFIG_SCSI_PLUTO) += pluto.o obj-$(CONFIG_SCSI_DECNCR) += NCR53C9x.o dec_esp.o obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o obj-$(CONFIG_SCSI_3W_9XXX) += 3w-9xxx.o @@ -123,7 +122,6 @@ obj-$(CONFIG_SCSI_PPA) += ppa.o obj-$(CONFIG_SCSI_IMM) += imm.o obj-$(CONFIG_JAZZ_ESP) += esp_scsi.o jazz_esp.o obj-$(CONFIG_SUN3X_ESP) += NCR53C9x.o sun3x_esp.o -obj-$(CONFIG_SCSI_FCAL) += fcal.o obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o obj-$(CONFIG_SCSI_SNI_53C710) += 53c700.o sni_53c710.o obj-$(CONFIG_SCSI_NSP32) += nsp32.o diff --git a/drivers/scsi/aic7xxx/aic7770.c b/drivers/scsi/aic7xxx/aic7770.c index c4d17231c828..6d86a9be538f 100644 --- a/drivers/scsi/aic7xxx/aic7770.c +++ b/drivers/scsi/aic7xxx/aic7770.c @@ -60,8 +60,6 @@ #define ID_OLV_274xD 0x04907783 /* Olivetti OEM (Differential) */ static int aic7770_chip_init(struct ahc_softc *ahc); -static int aic7770_suspend(struct ahc_softc *ahc); -static int aic7770_resume(struct ahc_softc *ahc); static int aha2840_load_seeprom(struct ahc_softc *ahc); static ahc_device_setup_t ahc_aic7770_VL_setup; static ahc_device_setup_t ahc_aic7770_EISA_setup; @@ -155,8 +153,6 @@ aic7770_config(struct ahc_softc *ahc, struct aic7770_identity *entry, u_int io) return (error); ahc->bus_chip_init = aic7770_chip_init; - ahc->bus_suspend = aic7770_suspend; - ahc->bus_resume = aic7770_resume; error = ahc_reset(ahc, /*reinit*/FALSE); if (error != 0) @@ -272,18 +268,6 @@ aic7770_chip_init(struct ahc_softc *ahc) return (ahc_chip_init(ahc)); } -static int -aic7770_suspend(struct ahc_softc *ahc) -{ - return (ahc_suspend(ahc)); -} - -static int -aic7770_resume(struct ahc_softc *ahc) -{ - return (ahc_resume(ahc)); -} - /* * Read the 284x SEEPROM. */ diff --git a/drivers/scsi/aic7xxx/aic79xx.h b/drivers/scsi/aic7xxx/aic79xx.h index 27adbb294ac1..ce638aa6005a 100644 --- a/drivers/scsi/aic7xxx/aic79xx.h +++ b/drivers/scsi/aic7xxx/aic79xx.h @@ -1003,8 +1003,15 @@ struct ahd_suspend_channel_state { uint8_t seqctl; }; +struct ahd_suspend_pci_state { + uint32_t devconfig; + uint8_t command; + uint8_t csize_lattime; +}; + struct ahd_suspend_state { struct ahd_suspend_channel_state channel[2]; + struct ahd_suspend_pci_state pci_state; uint8_t optionmode; uint8_t dscommand0; uint8_t dspcistatus; @@ -1333,6 +1340,8 @@ struct ahd_pci_identity *ahd_find_pci_device(ahd_dev_softc_t); int ahd_pci_config(struct ahd_softc *, struct ahd_pci_identity *); int ahd_pci_test_register_access(struct ahd_softc *); +void ahd_pci_suspend(struct ahd_softc *); +void ahd_pci_resume(struct ahd_softc *); /************************** SCB and SCB queue management **********************/ void ahd_qinfifo_requeue_tail(struct ahd_softc *ahd, @@ -1343,6 +1352,8 @@ struct ahd_softc *ahd_alloc(void *platform_arg, char *name); int ahd_softc_init(struct ahd_softc *); void ahd_controller_info(struct ahd_softc *ahd, char *buf); int ahd_init(struct ahd_softc *ahd); +int ahd_suspend(struct ahd_softc *ahd); +void ahd_resume(struct ahd_softc *ahd); int ahd_default_config(struct ahd_softc *ahd); int ahd_parse_vpddata(struct ahd_softc *ahd, struct vpd_config *vpd); diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c index 05f692bd0adc..a7dd8cdda472 100644 --- a/drivers/scsi/aic7xxx/aic79xx_core.c +++ b/drivers/scsi/aic7xxx/aic79xx_core.c @@ -7175,7 +7175,6 @@ ahd_pause_and_flushwork(struct ahd_softc *ahd) ahd->flags &= ~AHD_ALL_INTERRUPTS; } -#if 0 int ahd_suspend(struct ahd_softc *ahd) { @@ -7189,19 +7188,15 @@ ahd_suspend(struct ahd_softc *ahd) ahd_shutdown(ahd); return (0); } -#endif /* 0 */ -#if 0 -int +void ahd_resume(struct ahd_softc *ahd) { ahd_reset(ahd, /*reinit*/TRUE); ahd_intr_enable(ahd, TRUE); ahd_restart(ahd); - return (0); } -#endif /* 0 */ /************************** Busy Target Table *********************************/ /* diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c index 42c0f14a262c..2d020405480c 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm.c @@ -315,8 +315,8 @@ uint32_t aic79xx_slowcrc; */ static char *aic79xx = NULL; -MODULE_AUTHOR("Maintainer: Justin T. Gibbs <gibbs@scsiguy.com>"); -MODULE_DESCRIPTION("Adaptec Aic790X U320 SCSI Host Bus Adapter driver"); +MODULE_AUTHOR("Maintainer: Hannes Reinecke <hare@suse.de>"); +MODULE_DESCRIPTION("Adaptec AIC790X U320 SCSI Host Bus Adapter driver"); MODULE_LICENSE("Dual BSD/GPL"); MODULE_VERSION(AIC79XX_DRIVER_VERSION); module_param(aic79xx, charp, 0444); diff --git a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c index c62ce41f2793..66f0259edb69 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c @@ -50,6 +50,8 @@ static int ahd_linux_pci_reserve_io_regions(struct ahd_softc *ahd, static int ahd_linux_pci_reserve_mem_region(struct ahd_softc *ahd, u_long *bus_addr, uint8_t __iomem **maddr); +static int ahd_linux_pci_dev_suspend(struct pci_dev *pdev, pm_message_t mesg); +static int ahd_linux_pci_dev_resume(struct pci_dev *pdev); static void ahd_linux_pci_dev_remove(struct pci_dev *pdev); /* Define the macro locally since it's different for different class of chips. @@ -86,10 +88,58 @@ MODULE_DEVICE_TABLE(pci, ahd_linux_pci_id_table); static struct pci_driver aic79xx_pci_driver = { .name = "aic79xx", .probe = ahd_linux_pci_dev_probe, +#ifdef CONFIG_PM + .suspend = ahd_linux_pci_dev_suspend, + .resume = ahd_linux_pci_dev_resume, +#endif .remove = ahd_linux_pci_dev_remove, .id_table = ahd_linux_pci_id_table }; +static int +ahd_linux_pci_dev_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + struct ahd_softc *ahd = pci_get_drvdata(pdev); + int rc; + + if ((rc = ahd_suspend(ahd))) + return rc; + + ahd_pci_suspend(ahd); + + pci_save_state(pdev); + pci_disable_device(pdev); + + if (mesg.event == PM_EVENT_SUSPEND) + pci_set_power_state(pdev, PCI_D3hot); + + return rc; +} + +static int +ahd_linux_pci_dev_resume(struct pci_dev *pdev) +{ + struct ahd_softc *ahd = pci_get_drvdata(pdev); + int rc; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + if ((rc = pci_enable_device(pdev))) { + dev_printk(KERN_ERR, &pdev->dev, + "failed to enable device after resume (%d)\n", rc); + return rc; + } + + pci_set_master(pdev); + + ahd_pci_resume(ahd); + + ahd_resume(ahd); + + return rc; +} + static void ahd_linux_pci_dev_remove(struct pci_dev *pdev) { diff --git a/drivers/scsi/aic7xxx/aic79xx_pci.c b/drivers/scsi/aic7xxx/aic79xx_pci.c index 0bada0028aa0..7a203a90601a 100644 --- a/drivers/scsi/aic7xxx/aic79xx_pci.c +++ b/drivers/scsi/aic7xxx/aic79xx_pci.c @@ -389,6 +389,33 @@ ahd_pci_config(struct ahd_softc *ahd, struct ahd_pci_identity *entry) return error; } +void +ahd_pci_suspend(struct ahd_softc *ahd) +{ + /* + * Save chip register configuration data for chip resets + * that occur during runtime and resume events. + */ + ahd->suspend_state.pci_state.devconfig = + ahd_pci_read_config(ahd->dev_softc, DEVCONFIG, /*bytes*/4); + ahd->suspend_state.pci_state.command = + ahd_pci_read_config(ahd->dev_softc, PCIR_COMMAND, /*bytes*/1); + ahd->suspend_state.pci_state.csize_lattime = + ahd_pci_read_config(ahd->dev_softc, CSIZE_LATTIME, /*bytes*/1); + +} + +void +ahd_pci_resume(struct ahd_softc *ahd) +{ + ahd_pci_write_config(ahd->dev_softc, DEVCONFIG, + ahd->suspend_state.pci_state.devconfig, /*bytes*/4); + ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND, + ahd->suspend_state.pci_state.command, /*bytes*/1); + ahd_pci_write_config(ahd->dev_softc, CSIZE_LATTIME, + ahd->suspend_state.pci_state.csize_lattime, /*bytes*/1); +} + /* * Perform some simple tests that should catch situations where * our registers are invalidly mapped. diff --git a/drivers/scsi/aic7xxx/aic7xxx.h b/drivers/scsi/aic7xxx/aic7xxx.h index e1bd57b9f23d..3d4e42d90452 100644 --- a/drivers/scsi/aic7xxx/aic7xxx.h +++ b/drivers/scsi/aic7xxx/aic7xxx.h @@ -962,16 +962,6 @@ struct ahc_softc { ahc_bus_chip_init_t bus_chip_init; /* - * Bus specific suspend routine. - */ - ahc_bus_suspend_t bus_suspend; - - /* - * Bus specific resume routine. - */ - ahc_bus_resume_t bus_resume; - - /* * Target mode related state kept on a per enabled lun basis. * Targets that are not enabled will have null entries. * As an initiator, we keep one target entry for our initiator @@ -1153,6 +1143,7 @@ struct ahc_pci_identity *ahc_find_pci_device(ahc_dev_softc_t); int ahc_pci_config(struct ahc_softc *, struct ahc_pci_identity *); int ahc_pci_test_register_access(struct ahc_softc *); +void ahc_pci_resume(struct ahc_softc *ahc); /*************************** EISA/VL Front End ********************************/ struct aic7770_identity *aic7770_find_device(uint32_t); diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c index 7770befbf50c..390b0fc991c5 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm.c +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c @@ -335,8 +335,8 @@ static uint32_t aic7xxx_periodic_otag; */ static char *aic7xxx = NULL; -MODULE_AUTHOR("Maintainer: Justin T. Gibbs <gibbs@scsiguy.com>"); -MODULE_DESCRIPTION("Adaptec Aic77XX/78XX SCSI Host Bus Adapter driver"); +MODULE_AUTHOR("Maintainer: Hannes Reinecke <hare@suse.de>"); +MODULE_DESCRIPTION("Adaptec AIC77XX/78XX SCSI Host Bus Adapter driver"); MODULE_LICENSE("Dual BSD/GPL"); MODULE_VERSION(AIC7XXX_DRIVER_VERSION); module_param(aic7xxx, charp, 0444); diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c index ea5687df732d..4488946cff2e 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c +++ b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c @@ -49,6 +49,8 @@ static int ahc_linux_pci_reserve_io_region(struct ahc_softc *ahc, static int ahc_linux_pci_reserve_mem_region(struct ahc_softc *ahc, u_long *bus_addr, uint8_t __iomem **maddr); +static int ahc_linux_pci_dev_suspend(struct pci_dev *pdev, pm_message_t mesg); +static int ahc_linux_pci_dev_resume(struct pci_dev *pdev); static void ahc_linux_pci_dev_remove(struct pci_dev *pdev); /* Define the macro locally since it's different for different class of chips. @@ -133,10 +135,54 @@ MODULE_DEVICE_TABLE(pci, ahc_linux_pci_id_table); static struct pci_driver aic7xxx_pci_driver = { .name = "aic7xxx", .probe = ahc_linux_pci_dev_probe, +#ifdef CONFIG_PM + .suspend = ahc_linux_pci_dev_suspend, + .resume = ahc_linux_pci_dev_resume, +#endif .remove = ahc_linux_pci_dev_remove, .id_table = ahc_linux_pci_id_table }; +static int +ahc_linux_pci_dev_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + struct ahc_softc *ahc = pci_get_drvdata(pdev); + int rc; + + if ((rc = ahc_suspend(ahc))) + return rc; + + pci_save_state(pdev); + pci_disable_device(pdev); + + if (mesg.event == PM_EVENT_SUSPEND) + pci_set_power_state(pdev, PCI_D3hot); + + return rc; +} + +static int +ahc_linux_pci_dev_resume(struct pci_dev *pdev) +{ + struct ahc_softc *ahc = pci_get_drvdata(pdev); + int rc; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + if ((rc = pci_enable_device(pdev))) { + dev_printk(KERN_ERR, &pdev->dev, + "failed to enable device after resume (%d)\n", rc); + return rc; + } + + pci_set_master(pdev); + + ahc_pci_resume(ahc); + + return (ahc_resume(ahc)); +} + static void ahc_linux_pci_dev_remove(struct pci_dev *pdev) { diff --git a/drivers/scsi/aic7xxx/aic7xxx_pci.c b/drivers/scsi/aic7xxx/aic7xxx_pci.c index 09c8172c9e5e..ae35937b8055 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_pci.c +++ b/drivers/scsi/aic7xxx/aic7xxx_pci.c @@ -633,8 +633,6 @@ static void write_brdctl(struct ahc_softc *ahc, uint8_t value); static uint8_t read_brdctl(struct ahc_softc *ahc); static void ahc_pci_intr(struct ahc_softc *ahc); static int ahc_pci_chip_init(struct ahc_softc *ahc); -static int ahc_pci_suspend(struct ahc_softc *ahc); -static int ahc_pci_resume(struct ahc_softc *ahc); static int ahc_9005_subdevinfo_valid(uint16_t device, uint16_t vendor, @@ -791,8 +789,6 @@ ahc_pci_config(struct ahc_softc *ahc, struct ahc_pci_identity *entry) ahc->bus_intr = ahc_pci_intr; ahc->bus_chip_init = ahc_pci_chip_init; - ahc->bus_suspend = ahc_pci_suspend; - ahc->bus_resume = ahc_pci_resume; /* Remeber how the card was setup in case there is no SEEPROM */ if ((ahc_inb(ahc, HCNTRL) & POWRDN) == 0) { @@ -2024,18 +2020,9 @@ ahc_pci_chip_init(struct ahc_softc *ahc) return (ahc_chip_init(ahc)); } -static int -ahc_pci_suspend(struct ahc_softc *ahc) -{ - return (ahc_suspend(ahc)); -} - -static int +void ahc_pci_resume(struct ahc_softc *ahc) { - - pci_set_power_state(ahc->dev_softc, AHC_POWER_STATE_D0); - /* * We assume that the OS has restored our register * mappings, etc. Just update the config space registers @@ -2063,7 +2050,6 @@ ahc_pci_resume(struct ahc_softc *ahc) &sxfrctl1); ahc_release_seeprom(&sd); } - return (ahc_resume(ahc)); } static int diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_macro_scan.l b/drivers/scsi/aic7xxx/aicasm/aicasm_macro_scan.l index f06e7035cb35..c0457b8c3b77 100644 --- a/drivers/scsi/aic7xxx/aicasm/aicasm_macro_scan.l +++ b/drivers/scsi/aic7xxx/aicasm/aicasm_macro_scan.l @@ -66,6 +66,7 @@ static char string_buf[MAX_STR_CONST]; static char *string_buf_ptr; static int parren_count; static char buf[255]; +int mmlineno; %} WORD [A-Za-z_][-A-Za-z_0-9]* @@ -76,7 +77,7 @@ MCARG [^(), \t]+ %% \n { - ++yylineno; + ++mmlineno; } \r ; <ARGLIST>{SPACE} ; diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c index 4025608d6964..8f8db5f0aef7 100644 --- a/drivers/scsi/aic7xxx_old.c +++ b/drivers/scsi/aic7xxx_old.c @@ -8417,7 +8417,7 @@ aic7xxx_alloc(struct scsi_host_template *sht, struct aic7xxx_host *temp) p->host = host; p->scb_data = kzalloc(sizeof(scb_data_type), GFP_ATOMIC); - if (!p->scb_data) + if (p->scb_data) { scbq_init (&p->scb_data->free_scbs); } diff --git a/drivers/scsi/fcal.c b/drivers/scsi/fcal.c deleted file mode 100644 index c4e16c0775de..000000000000 --- a/drivers/scsi/fcal.c +++ /dev/null @@ -1,317 +0,0 @@ -/* fcal.c: Fibre Channel Arbitrated Loop SCSI host adapter driver. - * - * Copyright (C) 1998,1999 Jakub Jelinek (jj@ultra.linux.cz) - * - */ - -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/blkdev.h> -#include <linux/proc_fs.h> -#include <linux/stat.h> -#include <linux/init.h> -#ifdef CONFIG_KMOD -#include <linux/kmod.h> -#endif - -#include <asm/irq.h> - -#include "scsi.h" -#include <scsi/scsi_host.h> -#include "../fc4/fcp_impl.h" -#include "fcal.h" - -#include <linux/module.h> - -/* #define FCAL_DEBUG */ - -#define fcal_printk printk ("FCAL %s: ", fc->name); printk - -#ifdef FCAL_DEBUG -#define FCALD(x) fcal_printk x; -#define FCALND(x) printk ("FCAL: "); printk x; -#else -#define FCALD(x) -#define FCALND(x) -#endif - -static unsigned char alpa2target[] = { -0x7e, 0x7d, 0x7c, 0xff, 0x7b, 0xff, 0xff, 0xff, 0x7a, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x79, -0x78, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x77, 0x76, 0xff, 0xff, 0x75, 0xff, 0x74, 0x73, 0x72, -0xff, 0xff, 0xff, 0x71, 0xff, 0x70, 0x6f, 0x6e, 0xff, 0x6d, 0x6c, 0x6b, 0x6a, 0x69, 0x68, 0xff, -0xff, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62, 0xff, 0xff, 0x61, 0x60, 0xff, 0x5f, 0xff, 0xff, 0xff, -0xff, 0xff, 0xff, 0x5e, 0xff, 0x5d, 0x5c, 0x5b, 0xff, 0x5a, 0x59, 0x58, 0x57, 0x56, 0x55, 0xff, -0xff, 0x54, 0x53, 0x52, 0x51, 0x50, 0x4f, 0xff, 0xff, 0x4e, 0x4d, 0xff, 0x4c, 0xff, 0xff, 0xff, -0xff, 0xff, 0xff, 0x4b, 0xff, 0x4a, 0x49, 0x48, 0xff, 0x47, 0x46, 0x45, 0x44, 0x43, 0x42, 0xff, -0xff, 0x41, 0x40, 0x3f, 0x3e, 0x3d, 0x3c, 0xff, 0xff, 0x3b, 0x3a, 0xff, 0x39, 0xff, 0xff, 0xff, -0x38, 0x37, 0x36, 0xff, 0x35, 0xff, 0xff, 0xff, 0x34, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x33, -0x32, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x31, 0x30, 0xff, 0xff, 0x2f, 0xff, 0x2e, 0x2d, 0x2c, -0xff, 0xff, 0xff, 0x2b, 0xff, 0x2a, 0x29, 0x28, 0xff, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0xff, -0xff, 0x21, 0x20, 0x1f, 0x1e, 0x1d, 0x1c, 0xff, 0xff, 0x1b, 0x1a, 0xff, 0x19, 0xff, 0xff, 0xff, -0xff, 0xff, 0xff, 0x18, 0xff, 0x17, 0x16, 0x15, 0xff, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0xff, -0xff, 0x0e, 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0xff, 0xff, 0x08, 0x07, 0xff, 0x06, 0xff, 0xff, 0xff, -0x05, 0x04, 0x03, 0xff, 0x02, 0xff, 0xff, 0xff, 0x01, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 -}; - -static unsigned char target2alpa[] = { -0xef, 0xe8, 0xe4, 0xe2, 0xe1, 0xe0, 0xdc, 0xda, 0xd9, 0xd6, 0xd5, 0xd4, 0xd3, 0xd2, 0xd1, 0xce, -0xcd, 0xcc, 0xcb, 0xca, 0xc9, 0xc7, 0xc6, 0xc5, 0xc3, 0xbc, 0xba, 0xb9, 0xb6, 0xb5, 0xb4, 0xb3, -0xb2, 0xb1, 0xae, 0xad, 0xac, 0xab, 0xaa, 0xa9, 0xa7, 0xa6, 0xa5, 0xa3, 0x9f, 0x9e, 0x9d, 0x9b, -0x98, 0x97, 0x90, 0x8f, 0x88, 0x84, 0x82, 0x81, 0x80, 0x7c, 0x7a, 0x79, 0x76, 0x75, 0x74, 0x73, -0x72, 0x71, 0x6e, 0x6d, 0x6c, 0x6b, 0x6a, 0x69, 0x67, 0x66, 0x65, 0x63, 0x5c, 0x5a, 0x59, 0x56, -0x55, 0x54, 0x53, 0x52, 0x51, 0x4e, 0x4d, 0x4c, 0x4b, 0x4a, 0x49, 0x47, 0x46, 0x45, 0x43, 0x3c, -0x3a, 0x39, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0x2e, 0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x27, 0x26, -0x25, 0x23, 0x1f, 0x1e, 0x1d, 0x1b, 0x18, 0x17, 0x10, 0x0f, 0x08, 0x04, 0x02, 0x01, 0x00 -}; - -static int fcal_encode_addr(Scsi_Cmnd *SCpnt, u16 *addr, fc_channel *fc, fcp_cmnd *fcmd); - -int fcal_slave_configure(struct scsi_device *device) -{ - int depth_to_use; - - if (device->tagged_supported) - depth_to_use = /* 254 */ 8; - else - depth_to_use = 2; - - scsi_adjust_queue_depth(device, - (device->tagged_supported ? - MSG_SIMPLE_TAG : 0), - depth_to_use); - - return 0; -} - -/* Detect all FC Arbitrated Loops attached to the machine. - fc4 module has done all the work for us... */ -int __init fcal_detect(struct scsi_host_template *tpnt) -{ - int nfcals = 0; - fc_channel *fc; - int fcalcount; - int i; - - tpnt->proc_name = "fcal"; - fcalcount = 0; - for_each_online_fc_channel(fc) - if (fc->posmap) - fcalcount++; - FCALND(("%d channels online\n", fcalcount)) - if (!fcalcount) { -#if defined(MODULE) && defined(CONFIG_FC4_SOCAL_MODULE) && defined(CONFIG_KMOD) - request_module("socal"); - - for_each_online_fc_channel(fc) - if (fc->posmap) - fcalcount++; - if (!fcalcount) -#endif - return 0; - } - for_each_online_fc_channel(fc) { - struct Scsi_Host *host; - long *ages; - struct fcal *fcal; - - if (!fc->posmap) continue; - - /* Strange, this is already registered to some other SCSI host, then it cannot be fcal */ - if (fc->scsi_name[0]) continue; - memcpy (fc->scsi_name, "FCAL", 4); - - fc->can_queue = FCAL_CAN_QUEUE; - fc->rsp_size = 64; - fc->encode_addr = fcal_encode_addr; - - ages = kmalloc (128 * sizeof(long), GFP_KERNEL); - if (!ages) continue; - - host = scsi_register (tpnt, sizeof (struct fcal)); - if (!host) - { - kfree(ages); - continue; - } - - if (!try_module_get(fc->module)) { - kfree(ages); - scsi_unregister(host); - continue; - } - - nfcals++; - - fcal = (struct fcal *)host->hostdata; - - fc->fcp_register(fc, TYPE_SCSI_FCP, 0); - - for (i = 0; i < fc->posmap->len; i++) { - int status, target, alpa; - - alpa = fc->posmap->list[i]; - FCALD(("Sending PLOGI to %02x\n", alpa)) - target = alpa2target[alpa]; - status = fc_do_plogi(fc, alpa, fcal->node_wwn + target, - fcal->nport_wwn + target); - FCALD(("PLOGI returned with status %d\n", status)) - if (status != FC_STATUS_OK) - continue; - FCALD(("Sending PRLI to %02x\n", alpa)) - status = fc_do_prli(fc, alpa); - FCALD(("PRLI returned with status %d\n", status)) - if (status == FC_STATUS_OK) - fcal->map[target] = 1; - } - - host->max_id = 127; - host->irq = fc->irq; -#ifdef __sparc_v9__ - host->unchecked_isa_dma = 1; -#endif - - fc->channels = 1; - fc->targets = 127; - fc->ages = ages; - memset (ages, 0, 128 * sizeof(long)); - - fcal->fc = fc; - - FCALD(("Found FCAL\n")) - } - if (nfcals) -#ifdef __sparc__ - printk ("FCAL: Total of %d Sun Enterprise Network Array (A5000 or EX500) channels found\n", nfcals); -#else - printk ("FCAL: Total of %d Fibre Channel Arbitrated Loops found\n", nfcals); -#endif - return nfcals; -} - -int fcal_release(struct Scsi_Host *host) -{ - struct fcal *fcal = (struct fcal *)host->hostdata; - fc_channel *fc = fcal->fc; - - module_put(fc->module); - - fc->fcp_register(fc, TYPE_SCSI_FCP, 1); - FCALND((" releasing fcal.\n")); - kfree (fc->ages); - FCALND(("released fcal!\n")); - return 0; -} - -#undef SPRINTF -#define SPRINTF(args...) { if (pos < (buffer + length)) pos += sprintf (pos, ## args); } - -int fcal_proc_info (struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length, int inout) -{ - struct fcal *fcal; - fc_channel *fc; - char *pos = buffer; - int i, j; - - if (inout) return length; - - fcal = (struct fcal *)host->hostdata; - fc = fcal->fc; - -#ifdef __sparc__ - SPRINTF ("Sun Enterprise Network Array (A5000 or E?500) on %s PROM node %x\n", fc->name, fc->dev->prom_node); -#else - SPRINTF ("Fibre Channel Arbitrated Loop on %s\n", fc->name); -#endif - SPRINTF ("Initiator AL-PA: %02x\n", fc->sid); - - SPRINTF ("\nAttached devices:\n"); - - for (i = 0; i < fc->posmap->len; i++) { - unsigned char alpa = fc->posmap->list[i]; - unsigned char target; - u32 *u1, *u2; - - target = alpa2target[alpa]; - u1 = (u32 *)&fcal->nport_wwn[target]; - u2 = (u32 *)&fcal->node_wwn[target]; - if (!u1[0] && !u1[1]) { - SPRINTF (" [AL-PA: %02x] Not responded to PLOGI\n", alpa); - } else if (!fcal->map[target]) { - SPRINTF (" [AL-PA: %02x, Port WWN: %08x%08x, Node WWN: %08x%08x] Not responded to PRLI\n", - alpa, u1[0], u1[1], u2[0], u2[1]); - } else { - struct scsi_device *scd; - shost_for_each_device(scd, host) - if (scd->id == target) { - SPRINTF (" [AL-PA: %02x, Id: %02d, Port WWN: %08x%08x, Node WWN: %08x%08x] ", - alpa, target, u1[0], u1[1], u2[0], u2[1]); - SPRINTF ("%s ", scsi_device_type(scd->type)); - - for (j = 0; (j < 8) && (scd->vendor[j] >= 0x20); j++) - SPRINTF ("%c", scd->vendor[j]); - SPRINTF (" "); - - for (j = 0; (j < 16) && (scd->model[j] >= 0x20); j++) - SPRINTF ("%c", scd->model[j]); - - SPRINTF ("\n"); - } - } - } - SPRINTF ("\n"); - - *start = buffer + offset; - - if ((pos - buffer) < offset) - return 0; - else if (pos - buffer - offset < length) - return pos - buffer - offset; - else - return length; -} - -/* - For FC-AL, we use a simple addressing: we have just one channel 0, - and all AL-PAs are mapped to targets 0..0x7e - */ -static int fcal_encode_addr(Scsi_Cmnd *SCpnt, u16 *addr, fc_channel *fc, fcp_cmnd *fcmd) -{ - struct fcal *f; - - /* We don't support LUNs yet - I'm not sure if LUN should be in SCSI fcp_cdb, or in second byte of addr[0] */ - if (SCpnt->cmnd[1] & 0xe0) return -EINVAL; - /* FC-PLDA tells us... */ - memset(addr, 0, 8); - f = (struct fcal *)SCpnt->device->host->hostdata; - if (!f->map[SCpnt->device->id]) - return -EINVAL; - /* Now, determine DID: It will be Native Identifier, so we zero upper - 2 bytes of the 3 byte DID, lowest byte will be AL-PA */ - fcmd->did = target2alpa[SCpnt->device->id]; - FCALD(("trying DID %06x\n", fcmd->did)) - return 0; -} - -static struct scsi_host_template driver_template = { - .name = "Fibre Channel Arbitrated Loop", - .detect = fcal_detect, - .release = fcal_release, - .proc_info = fcal_proc_info, - .queuecommand = fcp_scsi_queuecommand, - .slave_configure = fcal_slave_configure, - .can_queue = FCAL_CAN_QUEUE, - .this_id = -1, - .sg_tablesize = 1, - .cmd_per_lun = 1, - .use_clustering = ENABLE_CLUSTERING, - .eh_abort_handler = fcp_scsi_abort, - .eh_device_reset_handler = fcp_scsi_dev_reset, - .eh_host_reset_handler = fcp_scsi_host_reset, -}; -#include "scsi_module.c" - -MODULE_LICENSE("GPL"); - diff --git a/drivers/scsi/fcal.h b/drivers/scsi/fcal.h deleted file mode 100644 index 7ff2c3494f9e..000000000000 --- a/drivers/scsi/fcal.h +++ /dev/null @@ -1,27 +0,0 @@ -/* fcal.h: Generic Fibre Channel Arbitrated Loop SCSI host adapter driver definitions. - * - * Copyright (C) 1998,1999 Jakub Jelinek (jj@ultra.linux.cz) - */ - -#ifndef _FCAL_H -#define _FCAL_H - -#include "../fc4/fcp_impl.h" - -struct fcal { - /* fc must be first */ - fc_channel *fc; - unsigned char map[128]; - fc_wwn nport_wwn[128]; - fc_wwn node_wwn[128]; -}; - -/* Arbitrary constant. Cannot be too large, as fc4 layer has limitations - for a particular channel */ -#define FCAL_CAN_QUEUE 512 - -int fcal_detect(struct scsi_host_template *); -int fcal_release(struct Scsi_Host *); -int fcal_slave_configure(struct scsi_device *); - -#endif /* !(_FCAL_H) */ diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index 5ab3ce762485..b253b8c718d3 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -4734,7 +4734,7 @@ static struct scsi_host_template gdth_template = { }; #ifdef CONFIG_ISA -static int gdth_isa_probe_one(ulong32 isa_bios) +static int __init gdth_isa_probe_one(ulong32 isa_bios) { struct Scsi_Host *shp; gdth_ha_str *ha; @@ -4862,7 +4862,7 @@ static int gdth_isa_probe_one(ulong32 isa_bios) #endif /* CONFIG_ISA */ #ifdef CONFIG_EISA -static int gdth_eisa_probe_one(ushort eisa_slot) +static int __init gdth_eisa_probe_one(ushort eisa_slot) { struct Scsi_Host *shp; gdth_ha_str *ha; @@ -4991,7 +4991,7 @@ static int gdth_eisa_probe_one(ushort eisa_slot) #endif /* CONFIG_EISA */ #ifdef CONFIG_PCI -static int gdth_pci_probe_one(gdth_pci_str *pcistr, int ctr) +static int __init gdth_pci_probe_one(gdth_pci_str *pcistr, int ctr) { struct Scsi_Host *shp; gdth_ha_str *ha; diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 112ab6abe62b..24271a871b8c 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -345,6 +345,12 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) shost->active_mode = sht->supported_mode; shost->use_sg_chaining = sht->use_sg_chaining; + if (sht->supported_mode == MODE_UNKNOWN) + /* means we didn't set it ... default to INITIATOR */ + shost->active_mode = MODE_INITIATOR; + else + shost->active_mode = sht->supported_mode; + if (sht->max_host_blocked) shost->max_host_blocked = sht->max_host_blocked; else diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c index 8515054cdf70..0844331abb87 100644 --- a/drivers/scsi/hptiop.c +++ b/drivers/scsi/hptiop.c @@ -375,8 +375,9 @@ static void hptiop_host_request_callback(struct hptiop_hba *hba, u32 _tag) scp->result = SAM_STAT_CHECK_CONDITION; memset(&scp->sense_buffer, 0, sizeof(scp->sense_buffer)); - memcpy(&scp->sense_buffer, - &req->sg_list, le32_to_cpu(req->dataxfer_length)); + memcpy(&scp->sense_buffer, &req->sg_list, + min(sizeof(scp->sense_buffer), + le32_to_cpu(req->dataxfer_length))); break; default: diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c index 22d40fd5845b..4c4465d39a1d 100644 --- a/drivers/scsi/initio.c +++ b/drivers/scsi/initio.c @@ -665,7 +665,7 @@ static void initio_init(struct initio_host * host, u8 *bios_addr) host->max_tags[i] = 0xFF; } /* for */ printk("i91u: PCI Base=0x%04X, IRQ=%d, BIOS=0x%04X0, SCSI ID=%d\n", - host->addr, host->irq, + host->addr, host->pci_dev->irq, host->bios_addr, host->scsi_id); /* Reset SCSI Bus */ if (host->config & HCC_SCSI_RESET) { @@ -2891,6 +2891,8 @@ static int initio_probe_one(struct pci_dev *pdev, goto out_release_region; } + host->pci_dev = pdev; + host->num_scbs = num_scb; host->scb = scb; host->next_pending = scb; @@ -2905,6 +2907,7 @@ static int initio_probe_one(struct pci_dev *pdev, host->scb_end = tmp; host->first_avail = scb; host->last_avail = prev; + spin_lock_init(&host->avail_lock); initio_init(host, phys_to_virt(bios_seg << 4)); @@ -2928,7 +2931,6 @@ static int initio_probe_one(struct pci_dev *pdev, } pci_set_drvdata(pdev, shost); - host->pci_dev = pdev; error = scsi_add_host(shost, &pdev->dev); if (error) diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index 149fdd25f8e8..d6a98bc970ff 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -901,7 +901,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) } } - vport->disc_trc = kmzlloc( + vport->disc_trc = kzalloc( (sizeof(struct lpfc_debugfs_trc) * lpfc_debugfs_max_disc_trc), GFP_KERNEL); diff --git a/drivers/scsi/pluto.c b/drivers/scsi/pluto.c deleted file mode 100644 index 0363c1cd68c1..000000000000 --- a/drivers/scsi/pluto.c +++ /dev/null @@ -1,349 +0,0 @@ -/* pluto.c: SparcSTORAGE Array SCSI host adapter driver. - * - * Copyright (C) 1997,1998,1999 Jakub Jelinek (jj@sunsite.mff.cuni.cz) - * - */ - -#include <linux/completion.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/blkdev.h> -#include <linux/proc_fs.h> -#include <linux/stat.h> -#include <linux/init.h> -#ifdef CONFIG_KMOD -#include <linux/kmod.h> -#endif - -#include <asm/irq.h> - -#include "scsi.h" -#include <scsi/scsi_host.h> -#include "../fc4/fcp_impl.h" -#include "pluto.h" - -#include <linux/module.h> - -#define RQ_SCSI_BUSY 0xffff -#define RQ_SCSI_DONE 0xfffe - -/* #define PLUTO_DEBUG */ - -#define pluto_printk printk ("PLUTO %s: ", fc->name); printk - -#ifdef PLUTO_DEBUG -#define PLD(x) pluto_printk x; -#define PLND(x) printk ("PLUTO: "); printk x; -#else -#define PLD(x) -#define PLND(x) -#endif - -static struct ctrl_inquiry { - struct Scsi_Host host; - struct pluto pluto; - Scsi_Cmnd cmd; - char inquiry[256]; - fc_channel *fc; -} *fcs __initdata; -static int fcscount __initdata = 0; -static atomic_t fcss __initdata = ATOMIC_INIT(0); -static DECLARE_COMPLETION(fc_detect_complete); - -static int pluto_encode_addr(Scsi_Cmnd *SCpnt, u16 *addr, fc_channel *fc, fcp_cmnd *fcmd); - -static void __init pluto_detect_done(Scsi_Cmnd *SCpnt) -{ - /* Do nothing */ -} - -static void __init pluto_detect_scsi_done(Scsi_Cmnd *SCpnt) -{ - PLND(("Detect done %08lx\n", (long)SCpnt)) - if (atomic_dec_and_test (&fcss)) - complete(&fc_detect_complete); -} - -int pluto_slave_configure(struct scsi_device *device) -{ - int depth_to_use; - - if (device->tagged_supported) - depth_to_use = /* 254 */ 8; - else - depth_to_use = 2; - - scsi_adjust_queue_depth(device, - (device->tagged_supported ? - MSG_SIMPLE_TAG : 0), - depth_to_use); - - return 0; -} - -/* Detect all SSAs attached to the machine. - To be fast, do it on all online FC channels at the same time. */ -int __init pluto_detect(struct scsi_host_template *tpnt) -{ - int i, retry, nplutos; - fc_channel *fc; - struct scsi_device dev; - - tpnt->proc_name = "pluto"; - fcscount = 0; - for_each_online_fc_channel(fc) { - if (!fc->posmap) - fcscount++; - } - PLND(("%d channels online\n", fcscount)) - if (!fcscount) { -#if defined(MODULE) && defined(CONFIG_FC4_SOC_MODULE) && defined(CONFIG_KMOD) - request_module("soc"); - - for_each_online_fc_channel(fc) { - if (!fc->posmap) - fcscount++; - } - if (!fcscount) -#endif - return 0; - } - fcs = kcalloc(fcscount, sizeof (struct ctrl_inquiry), GFP_DMA); - if (!fcs) { - printk ("PLUTO: Not enough memory to probe\n"); - return 0; - } - - memset (&dev, 0, sizeof(dev)); - atomic_set (&fcss, fcscount); - - i = 0; - for_each_online_fc_channel(fc) { - Scsi_Cmnd *SCpnt; - struct Scsi_Host *host; - struct pluto *pluto; - - if (i == fcscount) break; - if (fc->posmap) continue; - - PLD(("trying to find SSA\n")) - - /* If this is already registered to some other SCSI host, then it cannot be pluto */ - if (fc->scsi_name[0]) continue; - memcpy (fc->scsi_name, "SSA", 4); - - fcs[i].fc = fc; - - fc->can_queue = PLUTO_CAN_QUEUE; - fc->rsp_size = 64; - fc->encode_addr = pluto_encode_addr; - - fc->fcp_register(fc, TYPE_SCSI_FCP, 0); - - SCpnt = &(fcs[i].cmd); - host = &(fcs[i].host); - pluto = (struct pluto *)host->hostdata; - - pluto->fc = fc; - - SCpnt->cmnd[0] = INQUIRY; - SCpnt->cmnd[4] = 255; - - /* FC layer requires this, so that SCpnt->device->tagged_supported is initially 0 */ - SCpnt->device = &dev; - dev.host = host; - - SCpnt->cmd_len = COMMAND_SIZE(INQUIRY); - - SCpnt->request->cmd_flags &= ~REQ_STARTED; - - SCpnt->request_bufflen = 256; - SCpnt->request_buffer = fcs[i].inquiry; - PLD(("set up %d %08lx\n", i, (long)SCpnt)) - i++; - } - - for (retry = 0; retry < 5; retry++) { - for (i = 0; i < fcscount; i++) { - if (!fcs[i].fc) break; - if (!(fcs[i].cmd.request->cmd_flags & REQ_STARTED)) { - fcs[i].cmd.request->cmd_flags |= REQ_STARTED; - disable_irq(fcs[i].fc->irq); - PLND(("queuecommand %d %d\n", retry, i)) - fcp_scsi_queuecommand (&(fcs[i].cmd), - pluto_detect_scsi_done); - enable_irq(fcs[i].fc->irq); - } - } - - wait_for_completion_timeout(&fc_detect_complete, 10 * HZ); - PLND(("Woken up\n")) - if (!atomic_read(&fcss)) - break; /* All fc channels have answered us */ - } - - PLND(("Finished search\n")) - for (i = 0, nplutos = 0; i < fcscount; i++) { - Scsi_Cmnd *SCpnt; - - if (!(fc = fcs[i].fc)) break; - - SCpnt = &(fcs[i].cmd); - - /* Let FC mid-level free allocated resources */ - pluto_detect_scsi_done(SCpnt); - - if (!SCpnt->result) { - struct pluto_inquiry *inq; - struct pluto *pluto; - struct Scsi_Host *host; - - inq = (struct pluto_inquiry *)fcs[i].inquiry; - - if ((inq->dtype & 0x1f) == TYPE_PROCESSOR && - !strncmp (inq->vendor_id, "SUN", 3) && - !strncmp (inq->product_id, "SSA", 3)) { - char *p; - long *ages; - - ages = kcalloc((inq->channels + 1) * inq->targets, sizeof(long), GFP_KERNEL); - if (!ages) continue; - - host = scsi_register (tpnt, sizeof (struct pluto)); - if(!host) - { - kfree(ages); - continue; - } - - if (!try_module_get(fc->module)) { - kfree(ages); - scsi_unregister(host); - continue; - } - - nplutos++; - - pluto = (struct pluto *)host->hostdata; - - host->max_id = inq->targets; - host->max_channel = inq->channels; - host->irq = fc->irq; - - fc->channels = inq->channels + 1; - fc->targets = inq->targets; - fc->ages = ages; - - pluto->fc = fc; - memcpy (pluto->rev_str, inq->revision, 4); - pluto->rev_str[4] = 0; - p = strchr (pluto->rev_str, ' '); - if (p) *p = 0; - memcpy (pluto->fw_rev_str, inq->fw_revision, 4); - pluto->fw_rev_str[4] = 0; - p = strchr (pluto->fw_rev_str, ' '); - if (p) *p = 0; - memcpy (pluto->serial_str, inq->serial, 12); - pluto->serial_str[12] = 0; - p = strchr (pluto->serial_str, ' '); - if (p) *p = 0; - - PLD(("Found SSA rev %s fw rev %s serial %s %dx%d\n", pluto->rev_str, pluto->fw_rev_str, pluto->serial_str, host->max_channel, host->max_id)) - } else - fc->fcp_register(fc, TYPE_SCSI_FCP, 1); - } else - fc->fcp_register(fc, TYPE_SCSI_FCP, 1); - } - kfree(fcs); - if (nplutos) - printk ("PLUTO: Total of %d SparcSTORAGE Arrays found\n", nplutos); - return nplutos; -} - -int pluto_release(struct Scsi_Host *host) -{ - struct pluto *pluto = (struct pluto *)host->hostdata; - fc_channel *fc = pluto->fc; - - module_put(fc->module); - - fc->fcp_register(fc, TYPE_SCSI_FCP, 1); - PLND((" releasing pluto.\n")); - kfree (fc->ages); - PLND(("released pluto!\n")); - return 0; -} - -const char *pluto_info(struct Scsi_Host *host) -{ - static char buf[128], *p; - struct pluto *pluto = (struct pluto *) host->hostdata; - - sprintf(buf, "SUN SparcSTORAGE Array %s fw %s serial %s %dx%d on %s", - pluto->rev_str, pluto->fw_rev_str, pluto->serial_str, - host->max_channel, host->max_id, pluto->fc->name); -#ifdef __sparc__ - p = strchr(buf, 0); - sprintf(p, " PROM node %x", pluto->fc->dev->prom_node); -#endif - return buf; -} - -/* SSA uses this FC4S addressing: - switch (addr[0]) - { - case 0: CONTROLLER - All of addr[1]..addr[3] has to be 0 - case 1: SINGLE DISK - addr[1] channel, addr[2] id, addr[3] 0 - case 2: DISK GROUP - ??? - } - - So that SCSI mid-layer can access to these, we reserve - channel 0 id 0 lun 0 for CONTROLLER - and channels 1 .. max_channel are normal single disks. - */ -static int pluto_encode_addr(Scsi_Cmnd *SCpnt, u16 *addr, fc_channel *fc, fcp_cmnd *fcmd) -{ - PLND(("encode addr %d %d %d\n", SCpnt->device->channel, SCpnt->device->id, SCpnt->cmnd[1] & 0xe0)) - /* We don't support LUNs - neither does SSA :) */ - if (SCpnt->cmnd[1] & 0xe0) - return -EINVAL; - if (!SCpnt->device->channel) { - if (SCpnt->device->id) - return -EINVAL; - memset (addr, 0, 4 * sizeof(u16)); - } else { - addr[0] = 1; - addr[1] = SCpnt->device->channel - 1; - addr[2] = SCpnt->device->id; - addr[3] = 0; - } - /* We're Point-to-Point, so target it to the default DID */ - fcmd->did = fc->did; - PLND(("trying %04x%04x%04x%04x\n", addr[0], addr[1], addr[2], addr[3])) - return 0; -} - -static struct scsi_host_template driver_template = { - .name = "Sparc Storage Array 100/200", - .detect = pluto_detect, - .release = pluto_release, - .info = pluto_info, - .queuecommand = fcp_scsi_queuecommand, - .slave_configure = pluto_slave_configure, - .can_queue = PLUTO_CAN_QUEUE, - .this_id = -1, - .sg_tablesize = 1, - .cmd_per_lun = 1, - .use_clustering = ENABLE_CLUSTERING, - .eh_abort_handler = fcp_scsi_abort, - .eh_device_reset_handler = fcp_scsi_dev_reset, - .eh_host_reset_handler = fcp_scsi_host_reset, -}; - -#include "scsi_module.c" - -MODULE_LICENSE("GPL"); - diff --git a/drivers/scsi/pluto.h b/drivers/scsi/pluto.h deleted file mode 100644 index 5da20616ac36..000000000000 --- a/drivers/scsi/pluto.h +++ /dev/null @@ -1,47 +0,0 @@ -/* pluto.h: SparcSTORAGE Array SCSI host adapter driver definitions. - * - * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) - */ - -#ifndef _PLUTO_H -#define _PLUTO_H - -#include "../fc4/fcp_impl.h" - -struct pluto { - /* This must be first */ - fc_channel *fc; - char rev_str[5]; - char fw_rev_str[5]; - char serial_str[13]; -}; - -struct pluto_inquiry { - u8 dtype; - u8 removable:1, qualifier:7; - u8 iso:2, ecma:3, ansi:3; - u8 aenc:1, trmiop:1, :2, rdf:4; - u8 len; - u8 xxx1; - u8 xxx2; - u8 reladdr:1, wbus32:1, wbus16:1, sync:1, linked:1, :1, cmdque:1, softreset:1; - u8 vendor_id[8]; - u8 product_id[16]; - u8 revision[4]; - u8 fw_revision[4]; - u8 serial[12]; - u8 xxx3[2]; - u8 channels; - u8 targets; -}; - -/* This is the max number of outstanding SCSI commands per pluto */ -#define PLUTO_CAN_QUEUE 254 - -int pluto_detect(struct scsi_host_template *); -int pluto_release(struct Scsi_Host *); -const char * pluto_info(struct Scsi_Host *); -int pluto_slave_configure(struct scsi_device *); - -#endif /* !(_PLUTO_H) */ - diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index 76089cf55f4e..3aeb68bcb7ac 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -4310,7 +4310,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) printk(KERN_WARNING "scsi(%li): Unable to set a " "suitable DMA mask - aborting\n", ha->host_no); error = -ENODEV; - goto error_free_irq; + goto error_put_host; } } else dprintk(2, "scsi(%li): 64 Bit PCI Addressing Enabled\n", @@ -4320,7 +4320,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) printk(KERN_WARNING "scsi(%li): Unable to set a " "suitable DMA mask - aborting\n", ha->host_no); error = -ENODEV; - goto error_free_irq; + goto error_put_host; } #endif diff --git a/drivers/scsi/qla1280.h b/drivers/scsi/qla1280.h index 59915fb70301..ff2c363ead26 100644 --- a/drivers/scsi/qla1280.h +++ b/drivers/scsi/qla1280.h @@ -91,8 +91,8 @@ #define INVALID_HANDLE (MAX_OUTSTANDING_COMMANDS + 2) /* ISP request and response entry counts (37-65535) */ -#define REQUEST_ENTRY_CNT 256 /* Number of request entries. */ -#define RESPONSE_ENTRY_CNT 16 /* Number of response entries. */ +#define REQUEST_ENTRY_CNT 255 /* Number of request entries. */ +#define RESPONSE_ENTRY_CNT 63 /* Number of response entries. */ /* * SCSI Request Block structure (sp) that is placed diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 05fa7796a559..fb388b8c07cf 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -114,7 +114,6 @@ qla2x00_sysfs_write_nvram(struct kobject *kobj, { struct scsi_qla_host *ha = shost_priv(dev_to_shost(container_of(kobj, struct device, kobj))); - unsigned long flags; uint16_t cnt; if (!capable(CAP_SYS_ADMIN) || off != 0 || count != ha->nvram_size) @@ -144,11 +143,9 @@ qla2x00_sysfs_write_nvram(struct kobject *kobj, } /* Write NVRAM. */ - spin_lock_irqsave(&ha->hardware_lock, flags); ha->isp_ops->write_nvram(ha, (uint8_t *)buf, ha->nvram_base, count); ha->isp_ops->read_nvram(ha, (uint8_t *)ha->nvram, ha->nvram_base, count); - spin_unlock_irqrestore(&ha->hardware_lock, flags); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); @@ -397,16 +394,13 @@ qla2x00_sysfs_write_vpd(struct kobject *kobj, { struct scsi_qla_host *ha = shost_priv(dev_to_shost(container_of(kobj, struct device, kobj))); - unsigned long flags; if (!capable(CAP_SYS_ADMIN) || off != 0 || count != ha->vpd_size) return 0; /* Write NVRAM. */ - spin_lock_irqsave(&ha->hardware_lock, flags); ha->isp_ops->write_nvram(ha, (uint8_t *)buf, ha->vpd_base, count); ha->isp_ops->read_nvram(ha, (uint8_t *)ha->vpd, ha->vpd_base, count); - spin_unlock_irqrestore(&ha->hardware_lock, flags); return count; } @@ -544,6 +538,9 @@ qla2x00_serial_num_show(struct class_device *cdev, char *buf) scsi_qla_host_t *ha = shost_priv(class_to_shost(cdev)); uint32_t sn; + if (IS_FWI2_CAPABLE(ha)) + return snprintf(buf, PAGE_SIZE, "\n"); + sn = ((ha->serial0 & 0x1f) << 16) | (ha->serial2 << 8) | ha->serial1; return snprintf(buf, PAGE_SIZE, "%c%05d\n", 'A' + sn / 100000, sn % 100000); diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 1900fbf6cd74..04e8cbca4c0d 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2271,6 +2271,7 @@ typedef struct scsi_qla_host { spinlock_t hardware_lock ____cacheline_aligned; + int bars; device_reg_t __iomem *iobase; /* Base I/O address */ unsigned long pio_address; unsigned long pio_length; diff --git a/drivers/scsi/qla2xxx/qla_devtbl.h b/drivers/scsi/qla2xxx/qla_devtbl.h index dd435410dfa2..d78d35e681ab 100644 --- a/drivers/scsi/qla2xxx/qla_devtbl.h +++ b/drivers/scsi/qla2xxx/qla_devtbl.h @@ -1,4 +1,4 @@ -#define QLA_MODEL_NAMES 0x57 +#define QLA_MODEL_NAMES 0x5C /* * Adapter model names and descriptions. @@ -91,4 +91,9 @@ static char *qla2x00_model_name[QLA_MODEL_NAMES*2] = { " ", " ", /* 0x154 */ "QLE220", "PCI-Express to 4Gb FC, Single Channel", /* 0x155 */ "QLE220", "PCI-Express to 4Gb FC, Single Channel", /* 0x156 */ + " ", " ", /* 0x157 */ + " ", " ", /* 0x158 */ + " ", " ", /* 0x159 */ + " ", " ", /* 0x15a */ + "QME2472", "Dell BS PCI-Express to 4Gb FC, Dual Channel", /* 0x15b */ }; diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index 7f6a89bd94f3..024c662ec34d 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -525,7 +525,7 @@ qla2x00_req_pkt(scsi_qla_host_t *ha) /* Check for pending interrupts. */ /* During init we issue marker directly */ - if (!ha->marker_needed) + if (!ha->marker_needed && !ha->flags.init_done) qla2x00_poll(ha); spin_lock_irq(&ha->hardware_lock); diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index c4768c4f3990..1104bd2eed40 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1012,8 +1012,14 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) case CS_DATA_UNDERRUN: resid = resid_len; /* Use F/W calculated residual length. */ - if (IS_FWI2_CAPABLE(ha)) + if (IS_FWI2_CAPABLE(ha)) { + if (scsi_status & SS_RESIDUAL_UNDER && + resid != fw_resid_len) { + scsi_status &= ~SS_RESIDUAL_UNDER; + lscsi_status = 0; + } resid = fw_resid_len; + } if (scsi_status & SS_RESIDUAL_UNDER) { scsi_set_resid(cp, resid); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index c53ec67c47f4..ccd662a6f5dc 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -252,7 +252,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *pvha, mbx_cmd_t *mcp) /* Clean up */ ha->mcp = NULL; - if (!abort_active) { + if (abort_active || !io_lock_on) { DEBUG11(printk("%s(%ld): checking for additional resp " "interrupt.\n", __func__, ha->host_no)); diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 0351d380c2d7..a5bcf1f390b3 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1482,6 +1482,17 @@ qla2x00_iospace_config(scsi_qla_host_t *ha) unsigned long pio, pio_len, pio_flags; unsigned long mmio, mmio_len, mmio_flags; + if (pci_request_selected_regions(ha->pdev, ha->bars, + QLA2XXX_DRIVER_NAME)) { + qla_printk(KERN_WARNING, ha, + "Failed to reserve PIO/MMIO regions (%s)\n", + pci_name(ha->pdev)); + + goto iospace_error_exit; + } + if (!(ha->bars & 1)) + goto skip_pio; + /* We only need PIO for Flash operations on ISP2312 v2 chips. */ pio = pci_resource_start(ha->pdev, 0); pio_len = pci_resource_len(ha->pdev, 0); @@ -1499,7 +1510,10 @@ qla2x00_iospace_config(scsi_qla_host_t *ha) pci_name(ha->pdev)); pio = 0; } + ha->pio_address = pio; + ha->pio_length = pio_len; +skip_pio: /* Use MMIO operations for all accesses. */ mmio = pci_resource_start(ha->pdev, 1); mmio_len = pci_resource_len(ha->pdev, 1); @@ -1518,16 +1532,6 @@ qla2x00_iospace_config(scsi_qla_host_t *ha) goto iospace_error_exit; } - if (pci_request_regions(ha->pdev, QLA2XXX_DRIVER_NAME)) { - qla_printk(KERN_WARNING, ha, - "Failed to reserve PIO/MMIO regions (%s)\n", - pci_name(ha->pdev)); - - goto iospace_error_exit; - } - - ha->pio_address = pio; - ha->pio_length = pio_len; ha->iobase = ioremap(mmio, MIN_IOBASE_LEN); if (!ha->iobase) { qla_printk(KERN_ERR, ha, @@ -1579,21 +1583,26 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) char pci_info[30]; char fw_str[30]; struct scsi_host_template *sht; + int bars; - if (pci_enable_device(pdev)) - goto probe_out; - - if (pci_find_aer_capability(pdev)) - if (pci_enable_pcie_error_reporting(pdev)) - goto probe_out; - + bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO); sht = &qla2x00_driver_template; if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 || pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432 || pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5422 || pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5432 || - pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2532) + pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2532) { + bars = pci_select_bars(pdev, IORESOURCE_MEM); sht = &qla24xx_driver_template; + } + + if (pci_enable_device_bars(pdev, bars)) + goto probe_out; + + if (pci_find_aer_capability(pdev)) + if (pci_enable_pcie_error_reporting(pdev)) + goto probe_out; + host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t)); if (host == NULL) { printk(KERN_WARNING @@ -1610,6 +1619,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->host_no = host->host_no; sprintf(ha->host_str, "%s_%ld", QLA2XXX_DRIVER_NAME, ha->host_no); ha->parent = NULL; + ha->bars = bars; /* Set ISP-type information. */ qla2x00_set_isp_flags(ha); @@ -1880,7 +1890,7 @@ qla2x00_free_device(scsi_qla_host_t *ha) /* release io space registers */ if (ha->iobase) iounmap(ha->iobase); - pci_release_regions(ha->pdev); + pci_release_selected_regions(ha->pdev, ha->bars); } static inline void @@ -2890,7 +2900,7 @@ qla2xxx_pci_slot_reset(struct pci_dev *pdev) pci_ers_result_t ret = PCI_ERS_RESULT_DISCONNECT; scsi_qla_host_t *ha = pci_get_drvdata(pdev); - if (pci_enable_device(pdev)) { + if (pci_enable_device_bars(pdev, ha->bars)) { qla_printk(KERN_WARNING, ha, "Can't re-enable PCI device after reset.\n"); diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 40b059fc1981..ad2fa01bd233 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -7,6 +7,7 @@ #include "qla_def.h" #include <linux/delay.h> +#include <linux/vmalloc.h> #include <asm/uaccess.h> static uint16_t qla2x00_nvram_request(scsi_qla_host_t *, uint32_t); @@ -642,7 +643,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr, } /* Go with burst-write. */ - if (optrom && (liter + OPTROM_BURST_DWORDS) < dwords) { + if (optrom && (liter + OPTROM_BURST_DWORDS) <= dwords) { /* Copy data to DMA'ble buffer. */ for (miter = 0, s = optrom, d = dwptr; miter < OPTROM_BURST_DWORDS; miter++, s++, d++) @@ -656,7 +657,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr, "Unable to burst-write optrom segment " "(%x/%x/%llx).\n", ret, flash_data_to_access_addr(faddr), - optrom_dma); + (unsigned long long)optrom_dma); qla_printk(KERN_WARNING, ha, "Reverting to slow-write.\n"); @@ -745,9 +746,11 @@ qla2x00_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr, int ret, stat; uint32_t i; uint16_t *wptr; + unsigned long flags; ret = QLA_SUCCESS; + spin_lock_irqsave(&ha->hardware_lock, flags); qla2x00_lock_nvram_access(ha); /* Disable NVRAM write-protection. */ @@ -764,6 +767,7 @@ qla2x00_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr, qla2x00_set_nvram_protection(ha, stat); qla2x00_unlock_nvram_access(ha); + spin_unlock_irqrestore(&ha->hardware_lock, flags); return ret; } @@ -776,9 +780,11 @@ qla24xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr, uint32_t i; uint32_t *dwptr; struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; + unsigned long flags; ret = QLA_SUCCESS; + spin_lock_irqsave(&ha->hardware_lock, flags); /* Enable flash write. */ WRT_REG_DWORD(®->ctrl_status, RD_REG_DWORD(®->ctrl_status) | CSRX_FLASH_ENABLE); @@ -812,6 +818,7 @@ qla24xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr, WRT_REG_DWORD(®->ctrl_status, RD_REG_DWORD(®->ctrl_status) & ~CSRX_FLASH_ENABLE); RD_REG_DWORD(®->ctrl_status); /* PCI Posting. */ + spin_unlock_irqrestore(&ha->hardware_lock, flags); return ret; } @@ -836,8 +843,20 @@ int qla25xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr, uint32_t bytes) { - return qla24xx_write_flash_data(ha, (uint32_t *)buf, - FA_VPD_NVRAM_ADDR | naddr, bytes >> 2); +#define RMW_BUFFER_SIZE (64 * 1024) + uint8_t *dbuf; + + dbuf = vmalloc(RMW_BUFFER_SIZE); + if (!dbuf) + return QLA_MEMORY_ALLOC_FAILED; + ha->isp_ops->read_optrom(ha, dbuf, FA_VPD_NVRAM_ADDR << 2, + RMW_BUFFER_SIZE); + memcpy(dbuf + (naddr << 2), buf, bytes); + ha->isp_ops->write_optrom(ha, dbuf, FA_VPD_NVRAM_ADDR << 2, + RMW_BUFFER_SIZE); + vfree(dbuf); + + return QLA_SUCCESS; } static inline void @@ -1853,7 +1872,8 @@ qla25xx_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf, qla_printk(KERN_WARNING, ha, "Unable to burst-read optrom segment " "(%x/%x/%llx).\n", rval, - flash_data_to_access_addr(faddr), optrom_dma); + flash_data_to_access_addr(faddr), + (unsigned long long)optrom_dma); qla_printk(KERN_WARNING, ha, "Reverting to slow-read.\n"); diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 2d551a3006f6..ae6f7a2fb19f 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.02.00-k4" +#define QLA2XXX_VERSION "8.02.00-k5" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 2 diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index d29f8464b74f..ebaca4ca4a13 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -24,7 +24,6 @@ #include <linux/interrupt.h> #include <linux/blkdev.h> #include <linux/delay.h> -#include <linux/scatterlist.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index daed37df00b1..d531ceeb0d8c 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -209,11 +209,13 @@ show_shost_mode(unsigned int mode, char *buf) static ssize_t show_shost_supported_mode(struct class_device *class_dev, char *buf) { struct Scsi_Host *shost = class_to_shost(class_dev); + unsigned int supported_mode = shost->hostt->supported_mode; - if (shost->hostt->supported_mode == MODE_UNKNOWN) - return snprintf(buf, 20, "unknown\n"); - else - return show_shost_mode(shost->hostt->supported_mode, buf); + if (supported_mode == MODE_UNKNOWN) + /* by default this should be initiator */ + supported_mode = MODE_INITIATOR; + + return show_shost_mode(supported_mode, buf); } static CLASS_DEVICE_ATTR(supported_mode, S_IRUGO | S_IWUSR, show_shost_supported_mode, NULL); diff --git a/drivers/scsi/sym53c8xx_2/sym53c8xx.h b/drivers/scsi/sym53c8xx_2/sym53c8xx.h index 7519728dfc38..62d29cfac9e4 100644 --- a/drivers/scsi/sym53c8xx_2/sym53c8xx.h +++ b/drivers/scsi/sym53c8xx_2/sym53c8xx.h @@ -127,7 +127,6 @@ struct sym_driver_setup { u_char settle_delay; u_char use_nvram; u_long excludes[8]; - char tag_ctrl[100]; }; #define SYM_SETUP_MAX_TAG sym_driver_setup.max_tag diff --git a/drivers/scsi/sym53c8xx_2/sym_fw.c b/drivers/scsi/sym53c8xx_2/sym_fw.c index 9916a2a22558..190770bdc194 100644 --- a/drivers/scsi/sym53c8xx_2/sym_fw.c +++ b/drivers/scsi/sym53c8xx_2/sym_fw.c @@ -104,8 +104,9 @@ static struct sym_fwz_ofs sym_fw2z_ofs = { * Patch routine for firmware #1. */ static void -sym_fw1_patch(struct sym_hcb *np) +sym_fw1_patch(struct Scsi_Host *shost) { + struct sym_hcb *np = sym_get_hcb(shost); struct sym_fw1a_scr *scripta0; struct sym_fw1b_scr *scriptb0; @@ -145,8 +146,11 @@ sym_fw1_patch(struct sym_hcb *np) * Patch routine for firmware #2. */ static void -sym_fw2_patch(struct sym_hcb *np) +sym_fw2_patch(struct Scsi_Host *shost) { + struct sym_data *sym_data = shost_priv(shost); + struct pci_dev *pdev = sym_data->pdev; + struct sym_hcb *np = sym_data->ncb; struct sym_fw2a_scr *scripta0; struct sym_fw2b_scr *scriptb0; @@ -167,7 +171,7 @@ sym_fw2_patch(struct sym_hcb *np) * Remove useless 64 bit DMA specific SCRIPTS, * when this feature is not available. */ - if (!np->use_dac) { + if (!use_dac(np)) { scripta0->is_dmap_dirty[0] = cpu_to_scr(SCR_NO_OP); scripta0->is_dmap_dirty[1] = 0; scripta0->is_dmap_dirty[2] = cpu_to_scr(SCR_NO_OP); @@ -205,14 +209,14 @@ sym_fw2_patch(struct sym_hcb *np) * Remove a couple of work-arounds specific to C1010 if * they are not desirable. See `sym_fw2.h' for more details. */ - if (!(np->device_id == PCI_DEVICE_ID_LSI_53C1010_66 && - np->revision_id < 0x1 && + if (!(pdev->device == PCI_DEVICE_ID_LSI_53C1010_66 && + pdev->revision < 0x1 && np->pciclk_khz < 60000)) { scripta0->datao_phase[0] = cpu_to_scr(SCR_NO_OP); scripta0->datao_phase[1] = cpu_to_scr(0); } - if (!(np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 && - /* np->revision_id < 0xff */ 1)) { + if (!(pdev->device == PCI_DEVICE_ID_LSI_53C1010_33 /* && + pdev->revision < 0xff */)) { scripta0->sel_done[0] = cpu_to_scr(SCR_NO_OP); scripta0->sel_done[1] = cpu_to_scr(0); } diff --git a/drivers/scsi/sym53c8xx_2/sym_fw.h b/drivers/scsi/sym53c8xx_2/sym_fw.h index 66ec35beab5b..ae7e0f9e93fc 100644 --- a/drivers/scsi/sym53c8xx_2/sym_fw.h +++ b/drivers/scsi/sym53c8xx_2/sym_fw.h @@ -143,7 +143,7 @@ struct sym_fw { *z_ofs; /* Useful offsets in script Z */ /* Setup and patch methods for this firmware */ void (*setup)(struct sym_hcb *, struct sym_fw *); - void (*patch)(struct sym_hcb *); + void (*patch)(struct Scsi_Host *); }; /* diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index db03c4c8ec1e..0f74aba5b237 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -39,7 +39,6 @@ */ #include <linux/ctype.h> #include <linux/init.h> -#include <linux/interrupt.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/spinlock.h> @@ -54,16 +53,12 @@ #define NAME53C "sym53c" #define NAME53C8XX "sym53c8xx" -#define IRQ_FMT "%d" -#define IRQ_PRM(x) (x) - struct sym_driver_setup sym_driver_setup = SYM_LINUX_DRIVER_SETUP; unsigned int sym_debug_flags = 0; static char *excl_string; static char *safe_string; module_param_named(cmd_per_lun, sym_driver_setup.max_tag, ushort, 0); -module_param_string(tag_ctrl, sym_driver_setup.tag_ctrl, 100, 0); module_param_named(burst, sym_driver_setup.burst_order, byte, 0); module_param_named(led, sym_driver_setup.scsi_led, byte, 0); module_param_named(diff, sym_driver_setup.scsi_diff, byte, 0); @@ -78,7 +73,6 @@ module_param_named(excl, excl_string, charp, 0); module_param_named(safe, safe_string, charp, 0); MODULE_PARM_DESC(cmd_per_lun, "The maximum number of tags to use by default"); -MODULE_PARM_DESC(tag_ctrl, "More detailed control over tags per LUN"); MODULE_PARM_DESC(burst, "Maximum burst. 0 to disable, 255 to read from registers"); MODULE_PARM_DESC(led, "Set to 1 to enable LED support"); MODULE_PARM_DESC(diff, "0 for no differential mode, 1 for BIOS, 2 for always, 3 for not GPIO3"); @@ -134,56 +128,26 @@ static struct scsi_transport_template *sym2_transport_template = NULL; * Driver private area in the SCSI command structure. */ struct sym_ucmd { /* Override the SCSI pointer structure */ - dma_addr_t data_mapping; - unsigned char data_mapped; - unsigned char to_do; /* For error handling */ - void (*old_done)(struct scsi_cmnd *); /* For error handling */ - struct completion *eh_done; /* For error handling */ + struct completion *eh_done; /* SCSI error handling */ }; #define SYM_UCMD_PTR(cmd) ((struct sym_ucmd *)(&(cmd)->SCp)) #define SYM_SOFTC_PTR(cmd) sym_get_hcb(cmd->device->host) -static void __unmap_scsi_data(struct pci_dev *pdev, struct scsi_cmnd *cmd) -{ - if (SYM_UCMD_PTR(cmd)->data_mapped) - scsi_dma_unmap(cmd); - - SYM_UCMD_PTR(cmd)->data_mapped = 0; -} - -static int __map_scsi_sg_data(struct pci_dev *pdev, struct scsi_cmnd *cmd) -{ - int use_sg; - - use_sg = scsi_dma_map(cmd); - if (use_sg > 0) { - SYM_UCMD_PTR(cmd)->data_mapped = 2; - SYM_UCMD_PTR(cmd)->data_mapping = use_sg; - } - - return use_sg; -} - -#define unmap_scsi_data(np, cmd) \ - __unmap_scsi_data(np->s.device, cmd) -#define map_scsi_sg_data(np, cmd) \ - __map_scsi_sg_data(np->s.device, cmd) /* * Complete a pending CAM CCB. */ void sym_xpt_done(struct sym_hcb *np, struct scsi_cmnd *cmd) { - unmap_scsi_data(np, cmd); - cmd->scsi_done(cmd); -} + struct sym_ucmd *ucmd = SYM_UCMD_PTR(cmd); + BUILD_BUG_ON(sizeof(struct scsi_pointer) < sizeof(struct sym_ucmd)); -static void sym_xpt_done2(struct sym_hcb *np, struct scsi_cmnd *cmd, int cam_status) -{ - sym_set_cam_status(cmd, cam_status); - sym_xpt_done(np, cmd); -} + if (ucmd->eh_done) + complete(ucmd->eh_done); + scsi_dma_unmap(cmd); + cmd->scsi_done(cmd); +} /* * Tell the SCSI layer about a BUS RESET. @@ -199,14 +163,6 @@ void sym_xpt_async_bus_reset(struct sym_hcb *np) } /* - * Tell the SCSI layer about a BUS DEVICE RESET message sent. - */ -void sym_xpt_async_sent_bdr(struct sym_hcb *np, int target) -{ - printf_notice("%s: TARGET %d has been reset.\n", sym_name(np), target); -} - -/* * Choose the more appropriate CAM status if * the IO encountered an extended error. */ @@ -307,14 +263,14 @@ static int sym_scatter(struct sym_hcb *np, struct sym_ccb *cp, struct scsi_cmnd cp->data_len = 0; - use_sg = map_scsi_sg_data(np, cmd); + use_sg = scsi_dma_map(cmd); if (use_sg > 0) { struct scatterlist *sg; struct sym_tcb *tp = &np->target[cp->target]; struct sym_tblmove *data; if (use_sg > SYM_CONF_MAX_SG) { - unmap_scsi_data(np, cmd); + scsi_dma_unmap(cmd); return -1; } @@ -351,15 +307,6 @@ static int sym_queue_command(struct sym_hcb *np, struct scsi_cmnd *cmd) int order; /* - * Minimal checkings, so that we will not - * go outside our tables. - */ - if (sdev->id == np->myaddr) { - sym_xpt_done2(np, cmd, DID_NO_CONNECT); - return 0; - } - - /* * Retrieve the target descriptor. */ tp = &np->target[sdev->id]; @@ -433,7 +380,7 @@ int sym_setup_data_and_start(struct sym_hcb *np, struct scsi_cmnd *cmd, struct s */ switch (dir) { case DMA_BIDIRECTIONAL: - printk("%s: got DMA_BIDIRECTIONAL command", sym_name(np)); + scmd_printk(KERN_INFO, cmd, "got DMA_BIDIRECTIONAL command"); sym_set_cam_status(cmd, DID_ERROR); goto out_abort; case DMA_TO_DEVICE: @@ -542,14 +489,16 @@ static void sym_timer(struct sym_hcb *np) /* * PCI BUS error handler. */ -void sym_log_bus_error(struct sym_hcb *np) +void sym_log_bus_error(struct Scsi_Host *shost) { - u_short pci_sts; - pci_read_config_word(np->s.device, PCI_STATUS, &pci_sts); + struct sym_data *sym_data = shost_priv(shost); + struct pci_dev *pdev = sym_data->pdev; + unsigned short pci_sts; + pci_read_config_word(pdev, PCI_STATUS, &pci_sts); if (pci_sts & 0xf900) { - pci_write_config_word(np->s.device, PCI_STATUS, pci_sts); - printf("%s: PCI STATUS = 0x%04x\n", - sym_name(np), pci_sts & 0xf900); + pci_write_config_word(pdev, PCI_STATUS, pci_sts); + shost_printk(KERN_WARNING, shost, + "PCI bus error: status = 0x%04x\n", pci_sts & 0xf900); } } @@ -564,7 +513,7 @@ static int sym53c8xx_queue_command(struct scsi_cmnd *cmd, struct sym_ucmd *ucp = SYM_UCMD_PTR(cmd); int sts = 0; - cmd->scsi_done = done; + cmd->scsi_done = done; memset(ucp, 0, sizeof(*ucp)); /* @@ -593,18 +542,23 @@ static int sym53c8xx_queue_command(struct scsi_cmnd *cmd, */ static irqreturn_t sym53c8xx_intr(int irq, void *dev_id) { - unsigned long flags; - struct sym_hcb *np = (struct sym_hcb *)dev_id; + struct Scsi_Host *shost = dev_id; + struct sym_data *sym_data = shost_priv(shost); + irqreturn_t result; + + /* Avoid spinloop trying to handle interrupts on frozen device */ + if (pci_channel_offline(sym_data->pdev)) + return IRQ_NONE; if (DEBUG_FLAGS & DEBUG_TINY) printf_debug ("["); - spin_lock_irqsave(np->s.host->host_lock, flags); - sym_interrupt(np); - spin_unlock_irqrestore(np->s.host->host_lock, flags); + spin_lock(shost->host_lock); + result = sym_interrupt(shost); + spin_unlock(shost->host_lock); if (DEBUG_FLAGS & DEBUG_TINY) printf_debug ("]\n"); - return IRQ_HANDLED; + return result; } /* @@ -630,59 +584,61 @@ static void sym53c8xx_timer(unsigned long npref) #define SYM_EH_HOST_RESET 3 /* - * What we will do regarding the involved SCSI command. - */ -#define SYM_EH_DO_IGNORE 0 -#define SYM_EH_DO_WAIT 2 - -/* - * scsi_done() alias when error recovery is in progress. - */ -static void sym_eh_done(struct scsi_cmnd *cmd) -{ - struct sym_ucmd *ucmd = SYM_UCMD_PTR(cmd); - BUILD_BUG_ON(sizeof(struct scsi_pointer) < sizeof(struct sym_ucmd)); - - cmd->scsi_done = ucmd->old_done; - - if (ucmd->to_do == SYM_EH_DO_WAIT) - complete(ucmd->eh_done); -} - -/* * Generic method for our eh processing. * The 'op' argument tells what we have to do. */ static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd) { - struct sym_hcb *np = SYM_SOFTC_PTR(cmd); struct sym_ucmd *ucmd = SYM_UCMD_PTR(cmd); - struct Scsi_Host *host = cmd->device->host; + struct Scsi_Host *shost = cmd->device->host; + struct sym_data *sym_data = shost_priv(shost); + struct pci_dev *pdev = sym_data->pdev; + struct sym_hcb *np = sym_data->ncb; SYM_QUEHEAD *qp; - int to_do = SYM_EH_DO_IGNORE; + int cmd_queued = 0; int sts = -1; struct completion eh_done; - dev_warn(&cmd->device->sdev_gendev, "%s operation started.\n", opname); + scmd_printk(KERN_WARNING, cmd, "%s operation started\n", opname); + + /* We may be in an error condition because the PCI bus + * went down. In this case, we need to wait until the + * PCI bus is reset, the card is reset, and only then + * proceed with the scsi error recovery. There's no + * point in hurrying; take a leisurely wait. + */ +#define WAIT_FOR_PCI_RECOVERY 35 + if (pci_channel_offline(pdev)) { + struct completion *io_reset; + int finished_reset = 0; + init_completion(&eh_done); + spin_lock_irq(shost->host_lock); + /* Make sure we didn't race */ + if (pci_channel_offline(pdev)) { + if (!sym_data->io_reset) + sym_data->io_reset = &eh_done; + io_reset = sym_data->io_reset; + } else { + finished_reset = 1; + } + spin_unlock_irq(shost->host_lock); + if (!finished_reset) + finished_reset = wait_for_completion_timeout(io_reset, + WAIT_FOR_PCI_RECOVERY*HZ); + if (!finished_reset) + return SCSI_FAILED; + } - spin_lock_irq(host->host_lock); + spin_lock_irq(shost->host_lock); /* This one is queued in some place -> to wait for completion */ FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) { struct sym_ccb *cp = sym_que_entry(qp, struct sym_ccb, link_ccbq); if (cp->cmd == cmd) { - to_do = SYM_EH_DO_WAIT; + cmd_queued = 1; break; } } - if (to_do == SYM_EH_DO_WAIT) { - init_completion(&eh_done); - ucmd->old_done = cmd->scsi_done; - ucmd->eh_done = &eh_done; - wmb(); - cmd->scsi_done = sym_eh_done; - } - /* Try to proceed the operation we have been asked for */ sts = -1; switch(op) { @@ -698,7 +654,7 @@ static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd) break; case SYM_EH_HOST_RESET: sym_reset_scsi_bus(np, 0); - sym_start_up (np, 1); + sym_start_up(shost, 1); sts = 0; break; default: @@ -706,21 +662,21 @@ static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd) } /* On error, restore everything and cross fingers :) */ - if (sts) { - cmd->scsi_done = ucmd->old_done; - to_do = SYM_EH_DO_IGNORE; - } - - ucmd->to_do = to_do; - spin_unlock_irq(host->host_lock); + if (sts) + cmd_queued = 0; - if (to_do == SYM_EH_DO_WAIT) { + if (cmd_queued) { + init_completion(&eh_done); + ucmd->eh_done = &eh_done; + spin_unlock_irq(shost->host_lock); if (!wait_for_completion_timeout(&eh_done, 5*HZ)) { - ucmd->to_do = SYM_EH_DO_IGNORE; - wmb(); + ucmd->eh_done = NULL; sts = -2; } + } else { + spin_unlock_irq(shost->host_lock); } + dev_warn(&cmd->device->sdev_gendev, "%s operation %s.\n", opname, sts==0 ? "complete" :sts==-2 ? "timed-out" : "failed"); return sts ? SCSI_FAILED : SCSI_SUCCESS; @@ -775,59 +731,6 @@ static void sym_tune_dev_queuing(struct sym_tcb *tp, int lun, u_short reqtags) } } -/* - * Linux select queue depths function - */ -#define DEF_DEPTH (sym_driver_setup.max_tag) -#define ALL_TARGETS -2 -#define NO_TARGET -1 -#define ALL_LUNS -2 -#define NO_LUN -1 - -static int device_queue_depth(struct sym_hcb *np, int target, int lun) -{ - int c, h, t, u, v; - char *p = sym_driver_setup.tag_ctrl; - char *ep; - - h = -1; - t = NO_TARGET; - u = NO_LUN; - while ((c = *p++) != 0) { - v = simple_strtoul(p, &ep, 0); - switch(c) { - case '/': - ++h; - t = ALL_TARGETS; - u = ALL_LUNS; - break; - case 't': - if (t != target) - t = (target == v) ? v : NO_TARGET; - u = ALL_LUNS; - break; - case 'u': - if (u != lun) - u = (lun == v) ? v : NO_LUN; - break; - case 'q': - if (h == np->s.unit && - (t == ALL_TARGETS || t == target) && - (u == ALL_LUNS || u == lun)) - return v; - break; - case '-': - t = ALL_TARGETS; - u = ALL_LUNS; - break; - default: - break; - } - p = ep; - } - return DEF_DEPTH; -} - static int sym53c8xx_slave_alloc(struct scsi_device *sdev) { struct sym_hcb *np = sym_get_hcb(sdev->host); @@ -892,21 +795,16 @@ static int sym53c8xx_slave_configure(struct scsi_device *sdev) * Use at least 2. * Donnot use more than our maximum. */ - reqtags = device_queue_depth(np, sdev->id, sdev->lun); + reqtags = sym_driver_setup.max_tag; if (reqtags > tp->usrtags) reqtags = tp->usrtags; if (!sdev->tagged_supported) reqtags = 0; -#if 1 /* Avoid to locally queue commands for no good reasons */ if (reqtags > SYM_CONF_MAX_TAG) reqtags = SYM_CONF_MAX_TAG; - depth_to_use = (reqtags ? reqtags : 2); -#else - depth_to_use = (reqtags ? SYM_CONF_MAX_TAG : 2); -#endif + depth_to_use = reqtags ? reqtags : 2; scsi_adjust_queue_depth(sdev, - (sdev->tagged_supported ? - MSG_SIMPLE_TAG : 0), + sdev->tagged_supported ? MSG_SIMPLE_TAG : 0, depth_to_use); lp->s.scdev_depth = depth_to_use; sym_tune_dev_queuing(tp, sdev->lun, reqtags); @@ -1089,8 +987,9 @@ static int is_keyword(char *ptr, int len, char *verb) * Parse a control command */ -static int sym_user_command(struct sym_hcb *np, char *buffer, int length) +static int sym_user_command(struct Scsi_Host *shost, char *buffer, int length) { + struct sym_hcb *np = sym_get_hcb(shost); char *ptr = buffer; int len = length; struct sym_usrcmd cmd, *uc = &cmd; @@ -1217,9 +1116,9 @@ printk("sym_user_command: data=%ld\n", uc->data); else { unsigned long flags; - spin_lock_irqsave(np->s.host->host_lock, flags); - sym_exec_user_command (np, uc); - spin_unlock_irqrestore(np->s.host->host_lock, flags); + spin_lock_irqsave(shost->host_lock, flags); + sym_exec_user_command(np, uc); + spin_unlock_irqrestore(shost->host_lock, flags); } return length; } @@ -1275,8 +1174,11 @@ static int copy_info(struct info_str *info, char *fmt, ...) /* * Copy formatted information into the input buffer. */ -static int sym_host_info(struct sym_hcb *np, char *ptr, off_t offset, int len) +static int sym_host_info(struct Scsi_Host *shost, char *ptr, off_t offset, int len) { + struct sym_data *sym_data = shost_priv(shost); + struct pci_dev *pdev = sym_data->pdev; + struct sym_hcb *np = sym_data->ncb; struct info_str info; info.buffer = ptr; @@ -1285,10 +1187,10 @@ static int sym_host_info(struct sym_hcb *np, char *ptr, off_t offset, int len) info.pos = 0; copy_info(&info, "Chip " NAME53C "%s, device id 0x%x, " - "revision id 0x%x\n", - np->s.chip_name, np->device_id, np->revision_id); - copy_info(&info, "At PCI address %s, IRQ " IRQ_FMT "\n", - pci_name(np->s.device), IRQ_PRM(np->s.irq)); + "revision id 0x%x\n", np->s.chip_name, + pdev->device, pdev->revision); + copy_info(&info, "At PCI address %s, IRQ %u\n", + pci_name(pdev), pdev->irq); copy_info(&info, "Min. period factor %d, %s SCSI BUS%s\n", (int) (np->minsync_dt ? np->minsync_dt : np->minsync), np->maxwide ? "Wide" : "Narrow", @@ -1307,15 +1209,14 @@ static int sym_host_info(struct sym_hcb *np, char *ptr, off_t offset, int len) * - func = 0 means read (returns adapter infos) * - func = 1 means write (not yet merget from sym53c8xx) */ -static int sym53c8xx_proc_info(struct Scsi_Host *host, char *buffer, +static int sym53c8xx_proc_info(struct Scsi_Host *shost, char *buffer, char **start, off_t offset, int length, int func) { - struct sym_hcb *np = sym_get_hcb(host); int retv; if (func) { #ifdef SYM_LINUX_USER_COMMAND_SUPPORT - retv = sym_user_command(np, buffer, length); + retv = sym_user_command(shost, buffer, length); #else retv = -EINVAL; #endif @@ -1323,7 +1224,7 @@ static int sym53c8xx_proc_info(struct Scsi_Host *host, char *buffer, if (start) *start = buffer; #ifdef SYM_LINUX_USER_INFO_SUPPORT - retv = sym_host_info(np, buffer, offset, length); + retv = sym_host_info(shost, buffer, offset, length); #else retv = -EINVAL; #endif @@ -1341,8 +1242,8 @@ static void sym_free_resources(struct sym_hcb *np, struct pci_dev *pdev) /* * Free O/S specific resources. */ - if (np->s.irq) - free_irq(np->s.irq, np); + if (pdev->irq) + free_irq(pdev->irq, np); if (np->s.ioaddr) pci_iounmap(pdev, np->s.ioaddr); if (np->s.ramaddr) @@ -1356,31 +1257,6 @@ static void sym_free_resources(struct sym_hcb *np, struct pci_dev *pdev) } /* - * Ask/tell the system about DMA addressing. - */ -static int sym_setup_bus_dma_mask(struct sym_hcb *np) -{ -#if SYM_CONF_DMA_ADDRESSING_MODE > 0 -#if SYM_CONF_DMA_ADDRESSING_MODE == 1 -#define DMA_DAC_MASK DMA_40BIT_MASK -#elif SYM_CONF_DMA_ADDRESSING_MODE == 2 -#define DMA_DAC_MASK DMA_64BIT_MASK -#endif - if ((np->features & FE_DAC) && - !pci_set_dma_mask(np->s.device, DMA_DAC_MASK)) { - np->use_dac = 1; - return 0; - } -#endif - - if (!pci_set_dma_mask(np->s.device, DMA_32BIT_MASK)) - return 0; - - printf_warning("%s: No suitable DMA available\n", sym_name(np)); - return -1; -} - -/* * Host attach and initialisations. * * Allocate host data and ncb structure. @@ -1392,32 +1268,28 @@ static int sym_setup_bus_dma_mask(struct sym_hcb *np) static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, int unit, struct sym_device *dev) { - struct host_data *host_data; + struct sym_data *sym_data; struct sym_hcb *np = NULL; - struct Scsi_Host *instance = NULL; + struct Scsi_Host *shost; struct pci_dev *pdev = dev->pdev; unsigned long flags; struct sym_fw *fw; - printk(KERN_INFO - "sym%d: <%s> rev 0x%x at pci %s irq " IRQ_FMT "\n", - unit, dev->chip.name, dev->chip.revision_id, - pci_name(pdev), IRQ_PRM(pdev->irq)); + printk(KERN_INFO "sym%d: <%s> rev 0x%x at pci %s irq %u\n", + unit, dev->chip.name, pdev->revision, pci_name(pdev), + pdev->irq); /* * Get the firmware for this chip. */ fw = sym_find_firmware(&dev->chip); if (!fw) - goto attach_failed; + return NULL; - /* - * Allocate host_data structure - */ - instance = scsi_host_alloc(tpnt, sizeof(*host_data)); - if (!instance) - goto attach_failed; - host_data = (struct host_data *) instance->hostdata; + shost = scsi_host_alloc(tpnt, sizeof(*sym_data)); + if (!shost) + return NULL; + sym_data = shost_priv(shost); /* * Allocate immediately the host control block, @@ -1428,22 +1300,19 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, np = __sym_calloc_dma(&pdev->dev, sizeof(*np), "HCB"); if (!np) goto attach_failed; - np->s.device = pdev; np->bus_dmat = &pdev->dev; /* Result in 1 DMA pool per HBA */ - host_data->ncb = np; - np->s.host = instance; + sym_data->ncb = np; + sym_data->pdev = pdev; + np->s.host = shost; - pci_set_drvdata(pdev, np); + pci_set_drvdata(pdev, shost); /* * Copy some useful infos to the HCB. */ np->hcb_ba = vtobus(np); np->verbose = sym_driver_setup.verbose; - np->s.device = pdev; np->s.unit = unit; - np->device_id = dev->chip.device_id; - np->revision_id = dev->chip.revision_id; np->features = dev->chip.features; np->clock_divn = dev->chip.nr_divisor; np->maxoffs = dev->chip.offset_max; @@ -1456,8 +1325,13 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, strlcpy(np->s.chip_name, dev->chip.name, sizeof(np->s.chip_name)); sprintf(np->s.inst_name, "sym%d", np->s.unit); - if (sym_setup_bus_dma_mask(np)) + if ((SYM_CONF_DMA_ADDRESSING_MODE > 0) && (np->features & FE_DAC) && + !pci_set_dma_mask(pdev, DMA_DAC_MASK)) { + set_dac(np); + } else if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { + printf_warning("%s: No suitable DMA available\n", sym_name(np)); goto attach_failed; + } /* * Try to map the controller chip to @@ -1466,19 +1340,16 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, np->mmio_ba = (u32)dev->mmio_base; np->s.ioaddr = dev->s.ioaddr; np->s.ramaddr = dev->s.ramaddr; - np->s.io_ws = (np->features & FE_IO256) ? 256 : 128; /* * Map on-chip RAM if present and supported. */ if (!(np->features & FE_RAM)) dev->ram_base = 0; - if (dev->ram_base) { + if (dev->ram_base) np->ram_ba = (u32)dev->ram_base; - np->ram_ws = (np->features & FE_RAM8K) ? 8192 : 4096; - } - if (sym_hcb_attach(instance, fw, dev->nvram)) + if (sym_hcb_attach(shost, fw, dev->nvram)) goto attach_failed; /* @@ -1486,25 +1357,25 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, * If we synchonize the C code with SCRIPTS on interrupt, * we do not want to share the INTR line at all. */ - if (request_irq(pdev->irq, sym53c8xx_intr, IRQF_SHARED, NAME53C8XX, np)) { - printf_err("%s: request irq %d failure\n", + if (request_irq(pdev->irq, sym53c8xx_intr, IRQF_SHARED, NAME53C8XX, + shost)) { + printf_err("%s: request irq %u failure\n", sym_name(np), pdev->irq); goto attach_failed; } - np->s.irq = pdev->irq; /* * After SCSI devices have been opened, we cannot * reset the bus safely, so we do it here. */ - spin_lock_irqsave(instance->host_lock, flags); + spin_lock_irqsave(shost->host_lock, flags); if (sym_reset_scsi_bus(np, 0)) goto reset_failed; /* * Start the SCRIPTS. */ - sym_start_up (np, 1); + sym_start_up(shost, 1); /* * Start the timer daemon @@ -1519,33 +1390,37 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, * Fill Linux host instance structure * and return success. */ - instance->max_channel = 0; - instance->this_id = np->myaddr; - instance->max_id = np->maxwide ? 16 : 8; - instance->max_lun = SYM_CONF_MAX_LUN; - instance->unique_id = pci_resource_start(pdev, 0); - instance->cmd_per_lun = SYM_CONF_MAX_TAG; - instance->can_queue = (SYM_CONF_MAX_START-2); - instance->sg_tablesize = SYM_CONF_MAX_SG; - instance->max_cmd_len = 16; + shost->max_channel = 0; + shost->this_id = np->myaddr; + shost->max_id = np->maxwide ? 16 : 8; + shost->max_lun = SYM_CONF_MAX_LUN; + shost->unique_id = pci_resource_start(pdev, 0); + shost->cmd_per_lun = SYM_CONF_MAX_TAG; + shost->can_queue = (SYM_CONF_MAX_START-2); + shost->sg_tablesize = SYM_CONF_MAX_SG; + shost->max_cmd_len = 16; BUG_ON(sym2_transport_template == NULL); - instance->transportt = sym2_transport_template; + shost->transportt = sym2_transport_template; + + /* 53c896 rev 1 errata: DMA may not cross 16MB boundary */ + if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && pdev->revision < 2) + shost->dma_boundary = 0xFFFFFF; - spin_unlock_irqrestore(instance->host_lock, flags); + spin_unlock_irqrestore(shost->host_lock, flags); - return instance; + return shost; reset_failed: printf_err("%s: FATAL ERROR: CHECK SCSI BUS - CABLES, " "TERMINATION, DEVICE POWER etc.!\n", sym_name(np)); - spin_unlock_irqrestore(instance->host_lock, flags); + spin_unlock_irqrestore(shost->host_lock, flags); attach_failed: - if (!instance) + if (!shost) return NULL; printf_info("%s: giving up ...\n", sym_name(np)); if (np) sym_free_resources(np, pdev); - scsi_host_put(instance); + scsi_host_put(shost); return NULL; } @@ -1558,7 +1433,6 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, static void __devinit sym_get_nvram(struct sym_device *devp, struct sym_nvram *nvp) { devp->nvram = nvp; - devp->device_id = devp->chip.device_id; nvp->type = 0; sym_read_nvram(devp, nvp); @@ -1573,7 +1447,6 @@ static int __devinit sym_check_supported(struct sym_device *device) { struct sym_chip *chip; struct pci_dev *pdev = device->pdev; - u_char revision; unsigned long io_port = pci_resource_start(pdev, 0); int i; @@ -1593,14 +1466,12 @@ static int __devinit sym_check_supported(struct sym_device *device) * to our device structure so we can make it match the actual device * and options. */ - pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision); - chip = sym_lookup_chip_table(pdev->device, revision); + chip = sym_lookup_chip_table(pdev->device, pdev->revision); if (!chip) { dev_info(&pdev->dev, "device not supported\n"); return -ENODEV; } memcpy(&device->chip, chip, sizeof(device->chip)); - device->chip.revision_id = revision; return 0; } @@ -1641,7 +1512,7 @@ static int __devinit sym_set_workarounds(struct sym_device *device) * We must ensure the chip will use WRITE AND INVALIDATE. * The revision number limit is for now arbitrary. */ - if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && chip->revision_id < 0x4) { + if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && pdev->revision < 0x4) { chip->features |= (FE_WRIE | FE_CLSE); } @@ -1769,8 +1640,9 @@ static void sym_config_pqs(struct pci_dev *pdev, struct sym_device *sym_dev) * Detach the host. * We have to free resources and halt the NCR chip. */ -static int sym_detach(struct sym_hcb *np, struct pci_dev *pdev) +static int sym_detach(struct Scsi_Host *shost, struct pci_dev *pdev) { + struct sym_hcb *np = sym_get_hcb(shost); printk("%s: detaching ...\n", sym_name(np)); del_timer_sync(&np->s.timer); @@ -1823,7 +1695,7 @@ static int __devinit sym2_probe(struct pci_dev *pdev, { struct sym_device sym_dev; struct sym_nvram nvram; - struct Scsi_Host *instance; + struct Scsi_Host *shost; memset(&sym_dev, 0, sizeof(sym_dev)); memset(&nvram, 0, sizeof(nvram)); @@ -1850,13 +1722,13 @@ static int __devinit sym2_probe(struct pci_dev *pdev, sym_get_nvram(&sym_dev, &nvram); - instance = sym_attach(&sym2_template, attach_count, &sym_dev); - if (!instance) + shost = sym_attach(&sym2_template, attach_count, &sym_dev); + if (!shost) goto free; - if (scsi_add_host(instance, &pdev->dev)) + if (scsi_add_host(shost, &pdev->dev)) goto detach; - scsi_scan_host(instance); + scsi_scan_host(shost); attach_count++; @@ -1874,20 +1746,143 @@ static int __devinit sym2_probe(struct pci_dev *pdev, static void __devexit sym2_remove(struct pci_dev *pdev) { - struct sym_hcb *np = pci_get_drvdata(pdev); - struct Scsi_Host *host = np->s.host; - - scsi_remove_host(host); - scsi_host_put(host); - - sym_detach(np, pdev); + struct Scsi_Host *shost = pci_get_drvdata(pdev); + scsi_remove_host(shost); + scsi_host_put(shost); + sym_detach(shost, pdev); pci_release_regions(pdev); pci_disable_device(pdev); attach_count--; } +/** + * sym2_io_error_detected() - called when PCI error is detected + * @pdev: pointer to PCI device + * @state: current state of the PCI slot + */ +static pci_ers_result_t sym2_io_error_detected(struct pci_dev *pdev, + enum pci_channel_state state) +{ + /* If slot is permanently frozen, turn everything off */ + if (state == pci_channel_io_perm_failure) { + sym2_remove(pdev); + return PCI_ERS_RESULT_DISCONNECT; + } + + disable_irq(pdev->irq); + pci_disable_device(pdev); + + /* Request that MMIO be enabled, so register dump can be taken. */ + return PCI_ERS_RESULT_CAN_RECOVER; +} + +/** + * sym2_io_slot_dump - Enable MMIO and dump debug registers + * @pdev: pointer to PCI device + */ +static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + + sym_dump_registers(shost); + + /* Request a slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * sym2_reset_workarounds - hardware-specific work-arounds + * + * This routine is similar to sym_set_workarounds(), except + * that, at this point, we already know that the device was + * succesfully intialized at least once before, and so most + * of the steps taken there are un-needed here. + */ +static void sym2_reset_workarounds(struct pci_dev *pdev) +{ + u_short status_reg; + struct sym_chip *chip; + + chip = sym_lookup_chip_table(pdev->device, pdev->revision); + + /* Work around for errant bit in 895A, in a fashion + * similar to what is done in sym_set_workarounds(). + */ + pci_read_config_word(pdev, PCI_STATUS, &status_reg); + if (!(chip->features & FE_66MHZ) && (status_reg & PCI_STATUS_66MHZ)) { + status_reg = PCI_STATUS_66MHZ; + pci_write_config_word(pdev, PCI_STATUS, status_reg); + pci_read_config_word(pdev, PCI_STATUS, &status_reg); + } +} + +/** + * sym2_io_slot_reset() - called when the pci bus has been reset. + * @pdev: pointer to PCI device + * + * Restart the card from scratch. + */ +static pci_ers_result_t sym2_io_slot_reset(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct sym_hcb *np = sym_get_hcb(shost); + + printk(KERN_INFO "%s: recovering from a PCI slot reset\n", + sym_name(np)); + + if (pci_enable_device(pdev)) { + printk(KERN_ERR "%s: Unable to enable after PCI reset\n", + sym_name(np)); + return PCI_ERS_RESULT_DISCONNECT; + } + + pci_set_master(pdev); + enable_irq(pdev->irq); + + /* If the chip can do Memory Write Invalidate, enable it */ + if (np->features & FE_WRIE) { + if (pci_set_mwi(pdev)) + return PCI_ERS_RESULT_DISCONNECT; + } + + /* Perform work-arounds, analogous to sym_set_workarounds() */ + sym2_reset_workarounds(pdev); + + /* Perform host reset only on one instance of the card */ + if (PCI_FUNC(pdev->devfn) == 0) { + if (sym_reset_scsi_bus(np, 0)) { + printk(KERN_ERR "%s: Unable to reset scsi host\n", + sym_name(np)); + return PCI_ERS_RESULT_DISCONNECT; + } + sym_start_up(shost, 1); + } + + return PCI_ERS_RESULT_RECOVERED; +} + +/** + * sym2_io_resume() - resume normal ops after PCI reset + * @pdev: pointer to PCI device + * + * Called when the error recovery driver tells us that its + * OK to resume normal operation. Use completion to allow + * halted scsi ops to resume. + */ +static void sym2_io_resume(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct sym_data *sym_data = shost_priv(shost); + + spin_lock_irq(shost->host_lock); + if (sym_data->io_reset) + complete_all(sym_data->io_reset); + sym_data->io_reset = NULL; + spin_unlock_irq(shost->host_lock); +} + static void sym2_get_signalling(struct Scsi_Host *shost) { struct sym_hcb *np = sym_get_hcb(shost); @@ -2050,11 +2045,19 @@ static struct pci_device_id sym2_id_table[] __devinitdata = { MODULE_DEVICE_TABLE(pci, sym2_id_table); +static struct pci_error_handlers sym2_err_handler = { + .error_detected = sym2_io_error_detected, + .mmio_enabled = sym2_io_slot_dump, + .slot_reset = sym2_io_slot_reset, + .resume = sym2_io_resume, +}; + static struct pci_driver sym2_driver = { .name = NAME53C8XX, .id_table = sym2_id_table, .probe = sym2_probe, .remove = __devexit_p(sym2_remove), + .err_handler = &sym2_err_handler, }; static int __init sym2_init(void) diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.h b/drivers/scsi/sym53c8xx_2/sym_glue.h index 0f097ba4f712..567fbe0b4f09 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.h +++ b/drivers/scsi/sym53c8xx_2/sym_glue.h @@ -40,7 +40,9 @@ #ifndef SYM_GLUE_H #define SYM_GLUE_H +#include <linux/completion.h> #include <linux/delay.h> +#include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/pci.h> #include <linux/string.h> @@ -177,14 +179,11 @@ struct sym_shcb { int unit; char inst_name[16]; char chip_name[8]; - struct pci_dev *device; struct Scsi_Host *host; void __iomem * ioaddr; /* MMIO kernel io address */ void __iomem * ramaddr; /* RAM kernel io address */ - u_short io_ws; /* IO window size */ - int irq; /* IRQ number */ struct timer_list timer; /* Timer handler link header */ u_long lasttime; @@ -212,20 +211,21 @@ struct sym_device { } s; struct sym_chip chip; struct sym_nvram *nvram; - u_short device_id; u_char host_id; }; /* * Driver host data structure. */ -struct host_data { +struct sym_data { struct sym_hcb *ncb; + struct completion *io_reset; /* PCI error handling */ + struct pci_dev *pdev; }; static inline struct sym_hcb * sym_get_hcb(struct Scsi_Host *host) { - return ((struct host_data *)host->hostdata)->ncb; + return ((struct sym_data *)host->hostdata)->ncb; } #include "sym_fw.h" @@ -263,8 +263,8 @@ void sym_set_cam_result_error(struct sym_hcb *np, struct sym_ccb *cp, int resid) void sym_xpt_done(struct sym_hcb *np, struct scsi_cmnd *ccb); #define sym_print_addr(cmd, arg...) dev_info(&cmd->device->sdev_gendev , ## arg) void sym_xpt_async_bus_reset(struct sym_hcb *np); -void sym_xpt_async_sent_bdr(struct sym_hcb *np, int target); int sym_setup_data_and_start (struct sym_hcb *np, struct scsi_cmnd *csio, struct sym_ccb *cp); -void sym_log_bus_error(struct sym_hcb *np); +void sym_log_bus_error(struct Scsi_Host *); +void sym_dump_registers(struct Scsi_Host *); #endif /* SYM_GLUE_H */ diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index 21cd4c7f5289..463f119f20e9 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -52,7 +52,7 @@ * Needed function prototypes. */ static void sym_int_ma (struct sym_hcb *np); -static void sym_int_sir (struct sym_hcb *np); +static void sym_int_sir(struct sym_hcb *); static struct sym_ccb *sym_alloc_ccb(struct sym_hcb *np); static struct sym_ccb *sym_ccb_from_dsa(struct sym_hcb *np, u32 dsa); static void sym_alloc_lcb_tags (struct sym_hcb *np, u_char tn, u_char ln); @@ -684,6 +684,8 @@ static void sym_set_bus_mode(struct sym_hcb *np, struct sym_nvram *nvram) */ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, struct sym_nvram *nvram) { + struct sym_data *sym_data = shost_priv(shost); + struct pci_dev *pdev = sym_data->pdev; u_char burst_max; u32 period; int i; @@ -778,19 +780,12 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru * 64 bit addressing (895A/896/1010) ? */ if (np->features & FE_DAC) { -#if SYM_CONF_DMA_ADDRESSING_MODE == 0 - np->rv_ccntl1 |= (DDAC); -#elif SYM_CONF_DMA_ADDRESSING_MODE == 1 - if (!np->use_dac) - np->rv_ccntl1 |= (DDAC); - else - np->rv_ccntl1 |= (XTIMOD | EXTIBMV); -#elif SYM_CONF_DMA_ADDRESSING_MODE == 2 - if (!np->use_dac) - np->rv_ccntl1 |= (DDAC); - else - np->rv_ccntl1 |= (0 | EXTIBMV); -#endif + if (!use_dac(np)) + np->rv_ccntl1 |= (DDAC); + else if (SYM_CONF_DMA_ADDRESSING_MODE == 1) + np->rv_ccntl1 |= (XTIMOD | EXTIBMV); + else if (SYM_CONF_DMA_ADDRESSING_MODE == 2) + np->rv_ccntl1 |= (0 | EXTIBMV); } /* @@ -804,8 +799,8 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru * In dual channel mode, contention occurs if internal cycles * are used. Disable internal cycles. */ - if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 && - np->revision_id < 0x1) + if (pdev->device == PCI_DEVICE_ID_LSI_53C1010_33 && + pdev->revision < 0x1) np->rv_ccntl0 |= DILS; /* @@ -828,10 +823,10 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru * this driver. The generic ncr driver that does not use * LOAD/STORE instructions does not need this work-around. */ - if ((np->device_id == PCI_DEVICE_ID_NCR_53C810 && - np->revision_id >= 0x10 && np->revision_id <= 0x11) || - (np->device_id == PCI_DEVICE_ID_NCR_53C860 && - np->revision_id <= 0x1)) + if ((pdev->device == PCI_DEVICE_ID_NCR_53C810 && + pdev->revision >= 0x10 && pdev->revision <= 0x11) || + (pdev->device == PCI_DEVICE_ID_NCR_53C860 && + pdev->revision <= 0x1)) np->features &= ~(FE_WRIE|FE_ERL|FE_ERMP); /* @@ -897,7 +892,7 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru if ((SYM_SETUP_SCSI_LED || (nvram->type == SYM_SYMBIOS_NVRAM || (nvram->type == SYM_TEKRAM_NVRAM && - np->device_id == PCI_DEVICE_ID_NCR_53C895))) && + pdev->device == PCI_DEVICE_ID_NCR_53C895))) && !(np->features & FE_LEDC) && !(np->sv_gpcntl & 0x01)) np->features |= FE_LED0; @@ -1135,8 +1130,9 @@ restart_test: * First 24 register of the chip: * r0..rf */ -static void sym_log_hard_error(struct sym_hcb *np, u_short sist, u_char dstat) +static void sym_log_hard_error(struct Scsi_Host *shost, u_short sist, u_char dstat) { + struct sym_hcb *np = sym_get_hcb(shost); u32 dsp; int script_ofs; int script_size; @@ -1180,16 +1176,27 @@ static void sym_log_hard_error(struct sym_hcb *np, u_short sist, u_char dstat) scr_to_cpu((int) *(u32 *)(script_base + script_ofs))); } - printf ("%s: regdump:", sym_name(np)); - for (i=0; i<24;i++) - printf (" %02x", (unsigned)INB_OFF(np, i)); - printf (".\n"); + printf("%s: regdump:", sym_name(np)); + for (i = 0; i < 24; i++) + printf(" %02x", (unsigned)INB_OFF(np, i)); + printf(".\n"); /* * PCI BUS error. */ if (dstat & (MDPE|BF)) - sym_log_bus_error(np); + sym_log_bus_error(shost); +} + +void sym_dump_registers(struct Scsi_Host *shost) +{ + struct sym_hcb *np = sym_get_hcb(shost); + u_short sist; + u_char dstat; + + sist = INW(np, nc_sist); + dstat = INB(np, nc_dstat); + sym_log_hard_error(shost, sist, dstat); } static struct sym_chip sym_dev_table[] = { @@ -1312,7 +1319,7 @@ int sym_lookup_dmap(struct sym_hcb *np, u32 h, int s) { int i; - if (!np->use_dac) + if (!use_dac(np)) goto weird; /* Look up existing mappings */ @@ -1519,7 +1526,8 @@ void sym_put_start_queue(struct sym_hcb *np, struct sym_ccb *cp) np->squeueput = qidx; if (DEBUG_FLAGS & DEBUG_QUEUE) - printf ("%s: queuepos=%d.\n", sym_name (np), np->squeueput); + scmd_printk(KERN_DEBUG, cp->cmd, "queuepos=%d\n", + np->squeueput); /* * Script processor may be waiting for reselect. @@ -1696,8 +1704,11 @@ static void sym_flush_busy_queue (struct sym_hcb *np, int cam_status) * 1: SCSI BUS RESET delivered or received. * 2: SCSI BUS MODE changed. */ -void sym_start_up (struct sym_hcb *np, int reason) +void sym_start_up(struct Scsi_Host *shost, int reason) { + struct sym_data *sym_data = shost_priv(shost); + struct pci_dev *pdev = sym_data->pdev; + struct sym_hcb *np = sym_data->ncb; int i; u32 phys; @@ -1746,7 +1757,7 @@ void sym_start_up (struct sym_hcb *np, int reason) * This also let point to first position the start * and done queue pointers used from SCRIPTS. */ - np->fw_patch(np); + np->fw_patch(shost); /* * Wakeup all pending jobs. @@ -1788,7 +1799,7 @@ void sym_start_up (struct sym_hcb *np, int reason) /* * For now, disable AIP generation on C1010-66. */ - if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_66) + if (pdev->device == PCI_DEVICE_ID_LSI_53C1010_66) OUTB(np, nc_aipcntl1, DISAIP); /* @@ -1798,8 +1809,8 @@ void sym_start_up (struct sym_hcb *np, int reason) * that from SCRIPTS for each selection/reselection, but * I just don't want. :) */ - if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 && - np->revision_id < 1) + if (pdev->device == PCI_DEVICE_ID_LSI_53C1010_33 && + pdev->revision < 1) OUTB(np, nc_stest1, INB(np, nc_stest1) | 0x30); /* @@ -1807,9 +1818,9 @@ void sym_start_up (struct sym_hcb *np, int reason) * Disable overlapped arbitration for some dual function devices, * regardless revision id (kind of post-chip-design feature. ;-)) */ - if (np->device_id == PCI_DEVICE_ID_NCR_53C875) + if (pdev->device == PCI_DEVICE_ID_NCR_53C875) OUTB(np, nc_ctest0, (1<<5)); - else if (np->device_id == PCI_DEVICE_ID_NCR_53C896) + else if (pdev->device == PCI_DEVICE_ID_NCR_53C896) np->rv_ccntl0 |= DPR; /* @@ -1827,7 +1838,7 @@ void sym_start_up (struct sym_hcb *np, int reason) * Set up scratch C and DRS IO registers to map the 32 bit * DMA address range our data structures are located in. */ - if (np->use_dac) { + if (use_dac(np)) { np->dmap_bah[0] = 0; /* ??? */ OUTL(np, nc_scrx[0], np->dmap_bah[0]); OUTL(np, nc_drs, np->dmap_bah[0]); @@ -1900,7 +1911,7 @@ void sym_start_up (struct sym_hcb *np, int reason) if (sym_verbose >= 2) printf("%s: Downloading SCSI SCRIPTS.\n", sym_name(np)); memcpy_toio(np->s.ramaddr, np->scripta0, np->scripta_sz); - if (np->ram_ws == 8192) { + if (np->features & FE_RAM8K) { memcpy_toio(np->s.ramaddr + 4096, np->scriptb0, np->scriptb_sz); phys = scr_to_cpu(np->scr_ram_seg); OUTL(np, nc_mmws, phys); @@ -2214,8 +2225,9 @@ static void sym_int_udc (struct sym_hcb *np) * mode to eight bit asynchronous, etc... * So, just reinitializing all except chip should be enough. */ -static void sym_int_sbmc (struct sym_hcb *np) +static void sym_int_sbmc(struct Scsi_Host *shost) { + struct sym_hcb *np = sym_get_hcb(shost); u_char scsi_mode = INB(np, nc_stest4) & SMODE; /* @@ -2228,7 +2240,7 @@ static void sym_int_sbmc (struct sym_hcb *np) * Should suspend command processing for a few seconds and * reinitialize all except the chip. */ - sym_start_up (np, 2); + sym_start_up(shost, 2); } /* @@ -2756,8 +2768,11 @@ reset_all: * Use at your own decision and risk. */ -void sym_interrupt (struct sym_hcb *np) +irqreturn_t sym_interrupt(struct Scsi_Host *shost) { + struct sym_data *sym_data = shost_priv(shost); + struct sym_hcb *np = sym_data->ncb; + struct pci_dev *pdev = sym_data->pdev; u_char istat, istatc; u_char dstat; u_short sist; @@ -2782,7 +2797,7 @@ void sym_interrupt (struct sym_hcb *np) } if (!(istat & (SIP|DIP))) - return; + return (istat & INTF) ? IRQ_HANDLED : IRQ_NONE; #if 0 /* We should never get this one */ if (istat & CABRT) @@ -2809,6 +2824,13 @@ void sym_interrupt (struct sym_hcb *np) dstat |= INB(np, nc_dstat); istatc = INB(np, nc_istat); istat |= istatc; + + /* Prevent deadlock waiting on a condition that may + * never clear. */ + if (unlikely(sist == 0xffff && dstat == 0xff)) { + if (pci_channel_offline(pdev)) + return IRQ_NONE; + } } while (istatc & (SIP|DIP)); if (DEBUG_FLAGS & DEBUG_TINY) @@ -2842,10 +2864,10 @@ void sym_interrupt (struct sym_hcb *np) !(dstat & (MDPE|BF|ABRT|IID))) { if (sist & PAR) sym_int_par (np, sist); else if (sist & MA) sym_int_ma (np); - else if (dstat & SIR) sym_int_sir (np); + else if (dstat & SIR) sym_int_sir(np); else if (dstat & SSI) OUTONB_STD(); else goto unknown_int; - return; + return IRQ_HANDLED; } /* @@ -2861,8 +2883,8 @@ void sym_interrupt (struct sym_hcb *np) */ if (sist & RST) { printf("%s: SCSI BUS reset detected.\n", sym_name(np)); - sym_start_up (np, 1); - return; + sym_start_up(shost, 1); + return IRQ_HANDLED; } OUTB(np, nc_ctest3, np->rv_ctest3 | CLF); /* clear dma fifo */ @@ -2870,11 +2892,11 @@ void sym_interrupt (struct sym_hcb *np) if (!(sist & (GEN|HTH|SGE)) && !(dstat & (MDPE|BF|ABRT|IID))) { - if (sist & SBMC) sym_int_sbmc (np); + if (sist & SBMC) sym_int_sbmc(shost); else if (sist & STO) sym_int_sto (np); else if (sist & UDC) sym_int_udc (np); else goto unknown_int; - return; + return IRQ_HANDLED; } /* @@ -2884,12 +2906,12 @@ void sym_interrupt (struct sym_hcb *np) * Reset everything. */ - sym_log_hard_error(np, sist, dstat); + sym_log_hard_error(shost, sist, dstat); if ((sist & (GEN|HTH|SGE)) || (dstat & (MDPE|BF|ABRT|IID))) { sym_start_reset(np); - return; + return IRQ_HANDLED; } unknown_int: @@ -2900,6 +2922,7 @@ unknown_int: printf( "%s: unknown interrupt(s) ignored, " "ISTAT=0x%x DSTAT=0x%x SIST=0x%x\n", sym_name(np), istat, dstat, sist); + return IRQ_NONE; } /* @@ -3520,7 +3543,8 @@ static void sym_sir_task_recovery(struct sym_hcb *np, int num) * If we sent a BDR, make upper layer aware of that. */ if (np->abrt_msg[0] == M_RESET) - sym_xpt_async_sent_bdr(np, target); + starget_printk(KERN_NOTICE, starget, + "has been reset\n"); break; } @@ -4304,7 +4328,7 @@ static void sym_nego_rejected(struct sym_hcb *np, struct sym_tcb *tp, struct sym /* * chip exception handler for programmed interrupts. */ -static void sym_int_sir (struct sym_hcb *np) +static void sym_int_sir(struct sym_hcb *np) { u_char num = INB(np, nc_dsps); u32 dsa = INL(np, nc_dsa); @@ -4343,31 +4367,30 @@ static void sym_int_sir (struct sym_hcb *np) return; /* * The device didn't go to MSG OUT phase after having - * been selected with ATN. We donnot want to handle - * that. + * been selected with ATN. We do not want to handle that. */ case SIR_SEL_ATN_NO_MSG_OUT: - printf ("%s:%d: No MSG OUT phase after selection with ATN.\n", - sym_name (np), target); + scmd_printk(KERN_WARNING, cp->cmd, + "No MSG OUT phase after selection with ATN\n"); goto out_stuck; /* * The device didn't switch to MSG IN phase after - * having reseleted the initiator. + * having reselected the initiator. */ case SIR_RESEL_NO_MSG_IN: - printf ("%s:%d: No MSG IN phase after reselection.\n", - sym_name (np), target); + scmd_printk(KERN_WARNING, cp->cmd, + "No MSG IN phase after reselection\n"); goto out_stuck; /* * After reselection, the device sent a message that wasn't * an IDENTIFY. */ case SIR_RESEL_NO_IDENTIFY: - printf ("%s:%d: No IDENTIFY after reselection.\n", - sym_name (np), target); + scmd_printk(KERN_WARNING, cp->cmd, + "No IDENTIFY after reselection\n"); goto out_stuck; /* - * The device reselected a LUN we donnot know about. + * The device reselected a LUN we do not know about. */ case SIR_RESEL_BAD_LUN: np->msgout[0] = M_RESET; @@ -4380,8 +4403,7 @@ static void sym_int_sir (struct sym_hcb *np) np->msgout[0] = M_ABORT; goto out; /* - * The device reselected for a tagged nexus that we donnot - * have. + * The device reselected for a tagged nexus that we do not have. */ case SIR_RESEL_BAD_I_T_L_Q: np->msgout[0] = M_ABORT_TAG; @@ -4393,8 +4415,8 @@ static void sym_int_sir (struct sym_hcb *np) case SIR_RESEL_ABORTED: np->lastmsg = np->msgout[0]; np->msgout[0] = M_NOOP; - printf ("%s:%d: message %x sent on bad reselection.\n", - sym_name (np), target, np->lastmsg); + scmd_printk(KERN_WARNING, cp->cmd, + "message %x sent on bad reselection\n", np->lastmsg); goto out; /* * The SCRIPTS let us know that a message has been @@ -5578,16 +5600,13 @@ int sym_hcb_attach(struct Scsi_Host *shost, struct sym_fw *fw, struct sym_nvram np->scriptz_ba = vtobus(np->scriptz0); if (np->ram_ba) { - np->scripta_ba = np->ram_ba; + np->scripta_ba = np->ram_ba; if (np->features & FE_RAM8K) { - np->ram_ws = 8192; np->scriptb_ba = np->scripta_ba + 4096; #if 0 /* May get useful for 64 BIT PCI addressing */ np->scr_ram_seg = cpu_to_scr(np->scripta_ba >> 32); #endif } - else - np->ram_ws = 4096; } /* diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h index 79ab6a177039..ad078805e62b 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.h +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h @@ -883,10 +883,7 @@ struct sym_hcb { * Physical bus addresses of the chip. */ u32 mmio_ba; /* MMIO 32 bit BUS address */ - int mmio_ws; /* MMIO Window size */ - u32 ram_ba; /* RAM 32 bit BUS address */ - int ram_ws; /* RAM window size */ /* * SCRIPTS virtual and physical bus addresses. @@ -912,14 +909,12 @@ struct sym_hcb { struct sym_fwb_ba fwb_bas; /* Useful SCRIPTB bus addresses */ struct sym_fwz_ba fwz_bas; /* Useful SCRIPTZ bus addresses */ void (*fw_setup)(struct sym_hcb *np, struct sym_fw *fw); - void (*fw_patch)(struct sym_hcb *np); + void (*fw_patch)(struct Scsi_Host *); char *fw_name; /* * General controller parameters and configuration. */ - u_short device_id; /* PCI device id */ - u_char revision_id; /* PCI device revision id */ u_int features; /* Chip features map */ u_char myaddr; /* SCSI id of the adapter */ u_char maxburst; /* log base 2 of dwords burst */ @@ -1031,6 +1026,14 @@ struct sym_hcb { #endif }; +#if SYM_CONF_DMA_ADDRESSING_MODE == 0 +#define use_dac(np) 0 +#define set_dac(np) do { } while (0) +#else +#define use_dac(np) (np)->use_dac +#define set_dac(np) (np)->use_dac = 1 +#endif + #define HCB_BA(np, lbl) (np->hcb_ba + offsetof(struct sym_hcb, lbl)) @@ -1052,8 +1055,8 @@ void sym_start_next_ccbs(struct sym_hcb *np, struct sym_lcb *lp, int maxn); #else void sym_put_start_queue(struct sym_hcb *np, struct sym_ccb *cp); #endif -void sym_start_up(struct sym_hcb *np, int reason); -void sym_interrupt(struct sym_hcb *np); +void sym_start_up(struct Scsi_Host *, int reason); +irqreturn_t sym_interrupt(struct Scsi_Host *); int sym_clear_tasks(struct sym_hcb *np, int cam_status, int target, int lun, int task); struct sym_ccb *sym_get_ccb(struct sym_hcb *np, struct scsi_cmnd *cmd, u_char tag_order); void sym_free_ccb(struct sym_hcb *np, struct sym_ccb *cp); @@ -1073,18 +1076,21 @@ int sym_hcb_attach(struct Scsi_Host *shost, struct sym_fw *fw, struct sym_nvram */ #if SYM_CONF_DMA_ADDRESSING_MODE == 0 +#define DMA_DAC_MASK DMA_32BIT_MASK #define sym_build_sge(np, data, badd, len) \ do { \ (data)->addr = cpu_to_scr(badd); \ (data)->size = cpu_to_scr(len); \ } while (0) #elif SYM_CONF_DMA_ADDRESSING_MODE == 1 +#define DMA_DAC_MASK DMA_40BIT_MASK #define sym_build_sge(np, data, badd, len) \ do { \ (data)->addr = cpu_to_scr(badd); \ (data)->size = cpu_to_scr((((badd) >> 8) & 0xff000000) + len); \ } while (0) #elif SYM_CONF_DMA_ADDRESSING_MODE == 2 +#define DMA_DAC_MASK DMA_64BIT_MASK int sym_lookup_dmap(struct sym_hcb *np, u32 h, int s); static __inline void sym_build_sge(struct sym_hcb *np, struct sym_tblmove *data, u64 badd, int len) diff --git a/drivers/scsi/sym53c8xx_2/sym_nvram.c b/drivers/scsi/sym53c8xx_2/sym_nvram.c index 15d69298ab6e..5662fbb3ff60 100644 --- a/drivers/scsi/sym53c8xx_2/sym_nvram.c +++ b/drivers/scsi/sym53c8xx_2/sym_nvram.c @@ -696,7 +696,7 @@ static int sym_read_Tekram_nvram (struct sym_device *np, Tekram_nvram *nvram) u_short csum; int x; - switch (np->device_id) { + switch (np->pdev->device) { case PCI_DEVICE_ID_NCR_53C885: case PCI_DEVICE_ID_NCR_53C895: case PCI_DEVICE_ID_NCR_53C896: |
