diff options
Diffstat (limited to 'drivers/net/wireless/wl1251/sdio.c')
-rw-r--r-- | drivers/net/wireless/wl1251/sdio.c | 342 |
1 files changed, 342 insertions, 0 deletions
diff --git a/drivers/net/wireless/wl1251/sdio.c b/drivers/net/wireless/wl1251/sdio.c new file mode 100644 index 000000000000..74ba9ced5393 --- /dev/null +++ b/drivers/net/wireless/wl1251/sdio.c @@ -0,0 +1,342 @@ +/* + * wl12xx SDIO routines + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + * Copyright (C) 2005 Texas Instruments Incorporated + * Copyright (C) 2008 Google Inc + * Copyright (C) 2009 Bob Copeland (me@bobcopeland.com) + */ +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/mmc/sdio_func.h> +#include <linux/mmc/sdio_ids.h> +#include <linux/platform_device.h> +#include <linux/wl12xx.h> +#include <linux/irq.h> + +#include "wl1251.h" + +#ifndef SDIO_VENDOR_ID_TI +#define SDIO_VENDOR_ID_TI 0x104c +#endif + +#ifndef SDIO_DEVICE_ID_TI_WL1251 +#define SDIO_DEVICE_ID_TI_WL1251 0x9066 +#endif + +struct wl1251_sdio { + struct sdio_func *func; + u32 elp_val; +}; + +static struct wl12xx_platform_data *wl12xx_board_data; + +static struct sdio_func *wl_to_func(struct wl1251 *wl) +{ + struct wl1251_sdio *wl_sdio = wl->if_priv; + return wl_sdio->func; +} + +static void wl1251_sdio_interrupt(struct sdio_func *func) +{ + struct wl1251 *wl = sdio_get_drvdata(func); + + wl1251_debug(DEBUG_IRQ, "IRQ"); + + /* FIXME should be synchronous for sdio */ + ieee80211_queue_work(wl->hw, &wl->irq_work); +} + +static const struct sdio_device_id wl1251_devices[] = { + { SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1251) }, + {} +}; +MODULE_DEVICE_TABLE(sdio, wl1251_devices); + + +static void wl1251_sdio_read(struct wl1251 *wl, int addr, + void *buf, size_t len) +{ + int ret; + struct sdio_func *func = wl_to_func(wl); + + sdio_claim_host(func); + ret = sdio_memcpy_fromio(func, buf, addr, len); + if (ret) + wl1251_error("sdio read failed (%d)", ret); + sdio_release_host(func); +} + +static void wl1251_sdio_write(struct wl1251 *wl, int addr, + void *buf, size_t len) +{ + int ret; + struct sdio_func *func = wl_to_func(wl); + + sdio_claim_host(func); + ret = sdio_memcpy_toio(func, addr, buf, len); + if (ret) + wl1251_error("sdio write failed (%d)", ret); + sdio_release_host(func); +} + +static void wl1251_sdio_read_elp(struct wl1251 *wl, int addr, u32 *val) +{ + int ret = 0; + struct wl1251_sdio *wl_sdio = wl->if_priv; + struct sdio_func *func = wl_sdio->func; + + /* + * The hardware only supports RAW (read after write) access for + * reading, regular sdio_readb won't work here (it interprets + * the unused bits of CMD52 as write data even if we send read + * request). + */ + sdio_claim_host(func); + *val = sdio_writeb_readb(func, wl_sdio->elp_val, addr, &ret); + sdio_release_host(func); + + if (ret) + wl1251_error("sdio_readb failed (%d)", ret); +} + +static void wl1251_sdio_write_elp(struct wl1251 *wl, int addr, u32 val) +{ + int ret = 0; + struct wl1251_sdio *wl_sdio = wl->if_priv; + struct sdio_func *func = wl_sdio->func; + + sdio_claim_host(func); + sdio_writeb(func, val, addr, &ret); + sdio_release_host(func); + + if (ret) + wl1251_error("sdio_writeb failed (%d)", ret); + else + wl_sdio->elp_val = val; +} + +static void wl1251_sdio_reset(struct wl1251 *wl) +{ +} + +static void wl1251_sdio_enable_irq(struct wl1251 *wl) +{ + struct sdio_func *func = wl_to_func(wl); + + sdio_claim_host(func); + sdio_claim_irq(func, wl1251_sdio_interrupt); + sdio_release_host(func); +} + +static void wl1251_sdio_disable_irq(struct wl1251 *wl) +{ + struct sdio_func *func = wl_to_func(wl); + + sdio_claim_host(func); + sdio_release_irq(func); + sdio_release_host(func); +} + +/* Interrupts when using dedicated WLAN_IRQ pin */ +static irqreturn_t wl1251_line_irq(int irq, void *cookie) +{ + struct wl1251 *wl = cookie; + + ieee80211_queue_work(wl->hw, &wl->irq_work); + + return IRQ_HANDLED; +} + +static void wl1251_enable_line_irq(struct wl1251 *wl) +{ + return enable_irq(wl->irq); +} + +static void wl1251_disable_line_irq(struct wl1251 *wl) +{ + return disable_irq(wl->irq); +} + +static void wl1251_sdio_set_power(bool enable) +{ +} + +static struct wl1251_if_operations wl1251_sdio_ops = { + .read = wl1251_sdio_read, + .write = wl1251_sdio_write, + .write_elp = wl1251_sdio_write_elp, + .read_elp = wl1251_sdio_read_elp, + .reset = wl1251_sdio_reset, +}; + +static int wl1251_platform_probe(struct platform_device *pdev) +{ + if (pdev->id != -1) { + wl1251_error("can only handle single device"); + return -ENODEV; + } + + wl12xx_board_data = pdev->dev.platform_data; + return 0; +} + +/* + * Dummy platform_driver for passing platform_data to this driver, + * until we have a way to pass this through SDIO subsystem or + * some other way. + */ +static struct platform_driver wl1251_platform_driver = { + .driver = { + .name = "wl1251_data", + .owner = THIS_MODULE, + }, + .probe = wl1251_platform_probe, +}; + +static int wl1251_sdio_probe(struct sdio_func *func, + const struct sdio_device_id *id) +{ + int ret; + struct wl1251 *wl; + struct ieee80211_hw *hw; + struct wl1251_sdio *wl_sdio; + + hw = wl1251_alloc_hw(); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + wl = hw->priv; + + wl_sdio = kzalloc(sizeof(*wl_sdio), GFP_KERNEL); + if (wl_sdio == NULL) { + ret = -ENOMEM; + goto out_free_hw; + } + + sdio_claim_host(func); + ret = sdio_enable_func(func); + if (ret) + goto release; + + sdio_set_block_size(func, 512); + sdio_release_host(func); + + SET_IEEE80211_DEV(hw, &func->dev); + wl_sdio->func = func; + wl->if_priv = wl_sdio; + wl->if_ops = &wl1251_sdio_ops; + wl->set_power = wl1251_sdio_set_power; + + if (wl12xx_board_data != NULL) { + wl->set_power = wl12xx_board_data->set_power; + wl->irq = wl12xx_board_data->irq; + wl->use_eeprom = wl12xx_board_data->use_eeprom; + } + + if (wl->irq) { + ret = request_irq(wl->irq, wl1251_line_irq, 0, "wl1251", wl); + if (ret < 0) { + wl1251_error("request_irq() failed: %d", ret); + goto disable; + } + + set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING); + disable_irq(wl->irq); + + wl1251_sdio_ops.enable_irq = wl1251_enable_line_irq; + wl1251_sdio_ops.disable_irq = wl1251_disable_line_irq; + + wl1251_info("using dedicated interrupt line"); + } else { + wl1251_sdio_ops.enable_irq = wl1251_sdio_enable_irq; + wl1251_sdio_ops.disable_irq = wl1251_sdio_disable_irq; + + wl1251_info("using SDIO interrupt"); + } + + ret = wl1251_init_ieee80211(wl); + if (ret) + goto out_free_irq; + + sdio_set_drvdata(func, wl); + return ret; + +out_free_irq: + if (wl->irq) + free_irq(wl->irq, wl); +disable: + sdio_claim_host(func); + sdio_disable_func(func); +release: + sdio_release_host(func); + kfree(wl_sdio); +out_free_hw: + wl1251_free_hw(wl); + return ret; +} + +static void __devexit wl1251_sdio_remove(struct sdio_func *func) +{ + struct wl1251 *wl = sdio_get_drvdata(func); + struct wl1251_sdio *wl_sdio = wl->if_priv; + + if (wl->irq) + free_irq(wl->irq, wl); + kfree(wl_sdio); + wl1251_free_hw(wl); + + sdio_claim_host(func); + sdio_release_irq(func); + sdio_disable_func(func); + sdio_release_host(func); +} + +static struct sdio_driver wl1251_sdio_driver = { + .name = "wl1251_sdio", + .id_table = wl1251_devices, + .probe = wl1251_sdio_probe, + .remove = __devexit_p(wl1251_sdio_remove), +}; + +static int __init wl1251_sdio_init(void) +{ + int err; + + err = platform_driver_register(&wl1251_platform_driver); + if (err) { + wl1251_error("failed to register platform driver: %d", err); + return err; + } + + err = sdio_register_driver(&wl1251_sdio_driver); + if (err) + wl1251_error("failed to register sdio driver: %d", err); + return err; +} + +static void __exit wl1251_sdio_exit(void) +{ + sdio_unregister_driver(&wl1251_sdio_driver); + platform_driver_unregister(&wl1251_platform_driver); + wl1251_notice("unloaded"); +} + +module_init(wl1251_sdio_init); +module_exit(wl1251_sdio_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Kalle Valo <kvalo@adurom.com>"); |