diff options
Diffstat (limited to 'drivers/net/wireless/ralink/rt2x00/rt2400pci.c')
| -rw-r--r-- | drivers/net/wireless/ralink/rt2x00/rt2400pci.c | 1850 |
1 files changed, 1850 insertions, 0 deletions
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c new file mode 100644 index 000000000000..9a3966cd6fbe --- /dev/null +++ b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c @@ -0,0 +1,1850 @@ +/* + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +/* + Module: rt2400pci + Abstract: rt2400pci device specific routines. + Supported chipsets: RT2460. + */ + +#include <linux/delay.h> +#include <linux/etherdevice.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/eeprom_93cx6.h> +#include <linux/slab.h> + +#include "rt2x00.h" +#include "rt2x00mmio.h" +#include "rt2x00pci.h" +#include "rt2400pci.h" + +/* + * Register access. + * All access to the CSR registers will go through the methods + * rt2x00mmio_register_read and rt2x00mmio_register_write. + * BBP and RF register require indirect register access, + * and use the CSR registers BBPCSR and RFCSR to achieve this. + * These indirect registers work with busy bits, + * and we will try maximal REGISTER_BUSY_COUNT times to access + * the register while taking a REGISTER_BUSY_DELAY us delay + * between each attempt. When the busy bit is still set at that time, + * the access attempt is considered to have failed, + * and we will print an error. + */ +#define WAIT_FOR_BBP(__dev, __reg) \ + rt2x00mmio_regbusy_read((__dev), BBPCSR, BBPCSR_BUSY, (__reg)) +#define WAIT_FOR_RF(__dev, __reg) \ + rt2x00mmio_regbusy_read((__dev), RFCSR, RFCSR_BUSY, (__reg)) + +static void rt2400pci_bbp_write(struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u8 value) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the BBP becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, BBPCSR_VALUE, value); + rt2x00_set_field32(®, BBPCSR_REGNUM, word); + rt2x00_set_field32(®, BBPCSR_BUSY, 1); + rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 1); + + rt2x00mmio_register_write(rt2x00dev, BBPCSR, reg); + } + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +static void rt2400pci_bbp_read(struct rt2x00_dev *rt2x00dev, + const unsigned int word, u8 *value) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the BBP becomes available, afterwards we + * can safely write the read request into the register. + * After the data has been written, we wait until hardware + * returns the correct value, if at any time the register + * doesn't become available in time, reg will be 0xffffffff + * which means we return 0xff to the caller. + */ + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, BBPCSR_REGNUM, word); + rt2x00_set_field32(®, BBPCSR_BUSY, 1); + rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 0); + + rt2x00mmio_register_write(rt2x00dev, BBPCSR, reg); + + WAIT_FOR_BBP(rt2x00dev, ®); + } + + *value = rt2x00_get_field32(reg, BBPCSR_VALUE); + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +static void rt2400pci_rf_write(struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u32 value) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the RF becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_RF(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, RFCSR_VALUE, value); + rt2x00_set_field32(®, RFCSR_NUMBER_OF_BITS, 20); + rt2x00_set_field32(®, RFCSR_IF_SELECT, 0); + rt2x00_set_field32(®, RFCSR_BUSY, 1); + + rt2x00mmio_register_write(rt2x00dev, RFCSR, reg); + rt2x00_rf_write(rt2x00dev, word, value); + } + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +static void rt2400pci_eepromregister_read(struct eeprom_93cx6 *eeprom) +{ + struct rt2x00_dev *rt2x00dev = eeprom->data; + u32 reg; + + rt2x00mmio_register_read(rt2x00dev, CSR21, ®); + + eeprom->reg_data_in = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_IN); + eeprom->reg_data_out = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_OUT); + eeprom->reg_data_clock = + !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_CLOCK); + eeprom->reg_chip_select = + !!rt2x00_get_field32(reg, CSR21_EEPROM_CHIP_SELECT); +} + +static void rt2400pci_eepromregister_write(struct eeprom_93cx6 *eeprom) +{ + struct rt2x00_dev *rt2x00dev = eeprom->data; + u32 reg = 0; + + rt2x00_set_field32(®, CSR21_EEPROM_DATA_IN, !!eeprom->reg_data_in); + rt2x00_set_field32(®, CSR21_EEPROM_DATA_OUT, !!eeprom->reg_data_out); + rt2x00_set_field32(®, CSR21_EEPROM_DATA_CLOCK, + !!eeprom->reg_data_clock); + rt2x00_set_field32(®, CSR21_EEPROM_CHIP_SELECT, + !!eeprom->reg_chip_select); + + rt2x00mmio_register_write(rt2x00dev, CSR21, reg); +} + +#ifdef CONFIG_RT2X00_LIB_DEBUGFS +static const struct rt2x00debug rt2400pci_rt2x00debug = { + .owner = THIS_MODULE, + .csr = { + .read = rt2x00mmio_register_read, + .write = rt2x00mmio_register_write, + .flags = RT2X00DEBUGFS_OFFSET, + .word_base = CSR_REG_BASE, + .word_size = sizeof(u32), + .word_count = CSR_REG_SIZE / sizeof(u32), + }, + .eeprom = { + .read = rt2x00_eeprom_read, + .write = rt2x00_eeprom_write, + .word_base = EEPROM_BASE, + .word_size = sizeof(u16), + .word_count = EEPROM_SIZE / sizeof(u16), + }, + .bbp = { + .read = rt2400pci_bbp_read, + .write = rt2400pci_bbp_write, + .word_base = BBP_BASE, + .word_size = sizeof(u8), + .word_count = BBP_SIZE / sizeof(u8), + }, + .rf = { + .read = rt2x00_rf_read, + .write = rt2400pci_rf_write, + .word_base = RF_BASE, + .word_size = sizeof(u32), + .word_count = RF_SIZE / sizeof(u32), + }, +}; +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ + +static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2x00mmio_register_read(rt2x00dev, GPIOCSR, ®); + return rt2x00_get_field32(reg, GPIOCSR_VAL0); +} + +#ifdef CONFIG_RT2X00_LIB_LEDS +static void rt2400pci_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + unsigned int enabled = brightness != LED_OFF; + u32 reg; + + rt2x00mmio_register_read(led->rt2x00dev, LEDCSR, ®); + + if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC) + rt2x00_set_field32(®, LEDCSR_LINK, enabled); + else if (led->type == LED_TYPE_ACTIVITY) + rt2x00_set_field32(®, LEDCSR_ACTIVITY, enabled); + + rt2x00mmio_register_write(led->rt2x00dev, LEDCSR, reg); +} + +static int rt2400pci_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + u32 reg; + + rt2x00mmio_register_read(led->rt2x00dev, LEDCSR, ®); + rt2x00_set_field32(®, LEDCSR_ON_PERIOD, *delay_on); + rt2x00_set_field32(®, LEDCSR_OFF_PERIOD, *delay_off); + rt2x00mmio_register_write(led->rt2x00dev, LEDCSR, reg); + + return 0; +} + +static void rt2400pci_init_led(struct rt2x00_dev *rt2x00dev, + struct rt2x00_led *led, + enum led_type type) +{ + led->rt2x00dev = rt2x00dev; + led->type = type; + led->led_dev.brightness_set = rt2400pci_brightness_set; + led->led_dev.blink_set = rt2400pci_blink_set; + led->flags = LED_INITIALIZED; +} +#endif /* CONFIG_RT2X00_LIB_LEDS */ + +/* + * Configuration handlers. + */ +static void rt2400pci_config_filter(struct rt2x00_dev *rt2x00dev, + const unsigned int filter_flags) +{ + u32 reg; + + /* + * Start configuration steps. + * Note that the version error will always be dropped + * since there is no filter for it at this time. + */ + rt2x00mmio_register_read(rt2x00dev, RXCSR0, ®); + rt2x00_set_field32(®, RXCSR0_DROP_CRC, + !(filter_flags & FIF_FCSFAIL)); + rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL, + !(filter_flags & FIF_PLCPFAIL)); + rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, 1); + rt2x00_set_field32(®, RXCSR0_DROP_TODS, + !rt2x00dev->intf_ap_count); + rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1); + rt2x00mmio_register_write(rt2x00dev, RXCSR0, reg); +} + +static void rt2400pci_config_intf(struct rt2x00_dev *rt2x00dev, + struct rt2x00_intf *intf, + struct rt2x00intf_conf *conf, + const unsigned int flags) +{ + unsigned int bcn_preload; + u32 reg; + + if (flags & CONFIG_UPDATE_TYPE) { + /* + * Enable beacon config + */ + bcn_preload = PREAMBLE + GET_DURATION(IEEE80211_HEADER, 20); + rt2x00mmio_register_read(rt2x00dev, BCNCSR1, ®); + rt2x00_set_field32(®, BCNCSR1_PRELOAD, bcn_preload); + rt2x00mmio_register_write(rt2x00dev, BCNCSR1, reg); + + /* + * Enable synchronisation. + */ + rt2x00mmio_register_read(rt2x00dev, CSR14, ®); + rt2x00_set_field32(®, CSR14_TSF_SYNC, conf->sync); + rt2x00mmio_register_write(rt2x00dev, CSR14, reg); + } + + if (flags & CONFIG_UPDATE_MAC) + rt2x00mmio_register_multiwrite(rt2x00dev, CSR3, + conf->mac, sizeof(conf->mac)); + + if (flags & CONFIG_UPDATE_BSSID) + rt2x00mmio_register_multiwrite(rt2x00dev, CSR5, + conf->bssid, + sizeof(conf->bssid)); +} + +static void rt2400pci_config_erp(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_erp *erp, + u32 changed) +{ + int preamble_mask; + u32 reg; + + /* + * When short preamble is enabled, we should set bit 0x08 + */ + if (changed & BSS_CHANGED_ERP_PREAMBLE) { + preamble_mask = erp->short_preamble << 3; + + rt2x00mmio_register_read(rt2x00dev, TXCSR1, ®); + rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, 0x1ff); + rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME, 0x13a); + rt2x00_set_field32(®, TXCSR1_TSF_OFFSET, IEEE80211_HEADER); + rt2x00_set_field32(®, TXCSR1_AUTORESPONDER, 1); + rt2x00mmio_register_write(rt2x00dev, TXCSR1, reg); + + rt2x00mmio_register_read(rt2x00dev, ARCSR2, ®); + rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00); + rt2x00_set_field32(®, ARCSR2_SERVICE, 0x04); + rt2x00_set_field32(®, ARCSR2_LENGTH, + GET_DURATION(ACK_SIZE, 10)); + rt2x00mmio_register_write(rt2x00dev, ARCSR2, reg); + + rt2x00mmio_register_read(rt2x00dev, ARCSR3, ®); + rt2x00_set_field32(®, ARCSR3_SIGNAL, 0x01 | preamble_mask); + rt2x00_set_field32(®, ARCSR3_SERVICE, 0x04); + rt2x00_set_field32(®, ARCSR2_LENGTH, + GET_DURATION(ACK_SIZE, 20)); + rt2x00mmio_register_write(rt2x00dev, ARCSR3, reg); + + rt2x00mmio_register_read(rt2x00dev, ARCSR4, ®); + rt2x00_set_field32(®, ARCSR4_SIGNAL, 0x02 | preamble_mask); + rt2x00_set_field32(®, ARCSR4_SERVICE, 0x04); + rt2x00_set_field32(®, ARCSR2_LENGTH, + GET_DURATION(ACK_SIZE, 55)); + rt2x00mmio_register_write(rt2x00dev, ARCSR4, reg); + + rt2x00mmio_register_read(rt2x00dev, ARCSR5, ®); + rt2x00_set_field32(®, ARCSR5_SIGNAL, 0x03 | preamble_mask); + rt2x00_set_field32(®, ARCSR5_SERVICE, 0x84); + rt2x00_set_field32(®, ARCSR2_LENGTH, + GET_DURATION(ACK_SIZE, 110)); + rt2x00mmio_register_write(rt2x00dev, ARCSR5, reg); + } + + if (changed & BSS_CHANGED_BASIC_RATES) + rt2x00mmio_register_write(rt2x00dev, ARCSR1, erp->basic_rates); + + if (changed & BSS_CHANGED_ERP_SLOT) { + rt2x00mmio_register_read(rt2x00dev, CSR11, ®); + rt2x00_set_field32(®, CSR11_SLOT_TIME, erp->slot_time); + rt2x00mmio_register_write(rt2x00dev, CSR11, reg); + + rt2x00mmio_register_read(rt2x00dev, CSR18, ®); + rt2x00_set_field32(®, CSR18_SIFS, erp->sifs); + rt2x00_set_field32(®, CSR18_PIFS, erp->pifs); + rt2x00mmio_register_write(rt2x00dev, CSR18, reg); + + rt2x00mmio_register_read(rt2x00dev, CSR19, ®); + rt2x00_set_field32(®, CSR19_DIFS, erp->difs); + rt2x00_set_field32(®, CSR19_EIFS, erp->eifs); + rt2x00mmio_register_write(rt2x00dev, CSR19, reg); + } + + if (changed & BSS_CHANGED_BEACON_INT) { + rt2x00mmio_register_read(rt2x00dev, CSR12, ®); + rt2x00_set_field32(®, CSR12_BEACON_INTERVAL, + erp->beacon_int * 16); + rt2x00_set_field32(®, CSR12_CFP_MAX_DURATION, + erp->beacon_int * 16); + rt2x00mmio_register_write(rt2x00dev, CSR12, reg); + } +} + +static void rt2400pci_config_ant(struct rt2x00_dev *rt2x00dev, + struct antenna_setup *ant) +{ + u8 r1; + u8 r4; + + /* + * We should never come here because rt2x00lib is supposed + * to catch this and send us the correct antenna explicitely. + */ + BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY || + ant->tx == ANTENNA_SW_DIVERSITY); + + rt2400pci_bbp_read(rt2x00dev, 4, &r4); + rt2400pci_bbp_read(rt2x00dev, 1, &r1); + + /* + * Configure the TX antenna. + */ + switch (ant->tx) { + case ANTENNA_HW_DIVERSITY: + rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 1); + break; + case ANTENNA_A: + rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 0); + break; + case ANTENNA_B: + default: + rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 2); + break; + } + + /* + * Configure the RX antenna. + */ + switch (ant->rx) { + case ANTENNA_HW_DIVERSITY: + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); + break; + case ANTENNA_A: + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 0); + break; + case ANTENNA_B: + default: + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); + break; + } + + rt2400pci_bbp_write(rt2x00dev, 4, r4); + rt2400pci_bbp_write(rt2x00dev, 1, r1); +} + +static void rt2400pci_config_channel(struct rt2x00_dev *rt2x00dev, + struct rf_channel *rf) +{ + /* + * Switch on tuning bits. + */ + rt2x00_set_field32(&rf->rf1, RF1_TUNER, 1); + rt2x00_set_field32(&rf->rf3, RF3_TUNER, 1); + + rt2400pci_rf_write(rt2x00dev, 1, rf->rf1); + rt2400pci_rf_write(rt2x00dev, 2, rf->rf2); + rt2400pci_rf_write(rt2x00dev, 3, rf->rf3); + + /* + * RF2420 chipset don't need any additional actions. + */ + if (rt2x00_rf(rt2x00dev, RF2420)) + return; + + /* + * For the RT2421 chipsets we need to write an invalid + * reference clock rate to activate auto_tune. + * After that we set the value back to the correct channel. + */ + rt2400pci_rf_write(rt2x00dev, 1, rf->rf1); + rt2400pci_rf_write(rt2x00dev, 2, 0x000c2a32); + rt2400pci_rf_write(rt2x00dev, 3, rf->rf3); + + msleep(1); + + rt2400pci_rf_write(rt2x00dev, 1, rf->rf1); + rt2400pci_rf_write(rt2x00dev, 2, rf->rf2); + rt2400pci_rf_write(rt2x00dev, 3, rf->rf3); + + msleep(1); + + /* + * Switch off tuning bits. + */ + rt2x00_set_field32(&rf->rf1, RF1_TUNER, 0); + rt2x00_set_field32(&rf->rf3, RF3_TUNER, 0); + + rt2400pci_rf_write(rt2x00dev, 1, rf->rf1); + rt2400pci_rf_write(rt2x00dev, 3, rf->rf3); + + /* + * Clear false CRC during channel switch. + */ + rt2x00mmio_register_read(rt2x00dev, CNT0, &rf->rf1); +} + +static void rt2400pci_config_txpower(struct rt2x00_dev *rt2x00dev, int txpower) +{ + rt2400pci_bbp_write(rt2x00dev, 3, TXPOWER_TO_DEV(txpower)); +} + +static void rt2400pci_config_retry_limit(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + u32 reg; + + rt2x00mmio_register_read(rt2x00dev, CSR11, ®); + rt2x00_set_field32(®, CSR11_LONG_RETRY, + libconf->conf->long_frame_max_tx_count); + rt2x00_set_field32(®, CSR11_SHORT_RETRY, + libconf->conf->short_frame_max_tx_count); + rt2x00mmio_register_write(rt2x00dev, CSR11, reg); +} + +static void rt2400pci_config_ps(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + enum dev_state state = + (libconf->conf->flags & IEEE80211_CONF_PS) ? + STATE_SLEEP : STATE_AWAKE; + u32 reg; + + if (state == STATE_SLEEP) { + rt2x00mmio_register_read(rt2x00dev, CSR20, ®); + rt2x00_set_field32(®, CSR20_DELAY_AFTER_TBCN, + (rt2x00dev->beacon_int - 20) * 16); + rt2x00_set_field32(®, CSR20_TBCN_BEFORE_WAKEUP, + libconf->conf->listen_interval - 1); + + /* We must first disable autowake before it can be enabled */ + rt2x00_set_field32(®, CSR20_AUTOWAKE, 0); + rt2x00mmio_register_write(rt2x00dev, CSR20, reg); + + rt2x00_set_field32(®, CSR20_AUTOWAKE, 1); + rt2x00mmio_register_write(rt2x00dev, CSR20, reg); + } else { + rt2x00mmio_register_read(rt2x00dev, CSR20, ®); + rt2x00_set_field32(®, CSR20_AUTOWAKE, 0); + rt2x00mmio_register_write(rt2x00dev, CSR20, reg); + } + + rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); +} + +static void rt2400pci_config(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf, + const unsigned int flags) +{ + if (flags & IEEE80211_CONF_CHANGE_CHANNEL) + rt2400pci_config_channel(rt2x00dev, &libconf->rf); + if (flags & IEEE80211_CONF_CHANGE_POWER) + rt2400pci_config_txpower(rt2x00dev, + libconf->conf->power_level); + if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) + rt2400pci_config_retry_limit(rt2x00dev, libconf); + if (flags & IEEE80211_CONF_CHANGE_PS) + rt2400pci_config_ps(rt2x00dev, libconf); +} + +static void rt2400pci_config_cw(struct rt2x00_dev *rt2x00dev, + const int cw_min, const int cw_max) +{ + u32 reg; + + rt2x00mmio_register_read(rt2x00dev, CSR11, ®); + rt2x00_set_field32(®, CSR11_CWMIN, cw_min); + rt2x00_set_field32(®, CSR11_CWMAX, cw_max); + rt2x00mmio_register_write(rt2x00dev, CSR11, reg); +} + +/* + * Link tuning + */ +static void rt2400pci_link_stats(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual) +{ + u32 reg; + u8 bbp; + + /* + * Update FCS error count from register. + */ + rt2x00mmio_register_read(rt2x00dev, CNT0, ®); + qual->rx_failed = rt2x00_get_field32(reg, CNT0_FCS_ERROR); + + /* + * Update False CCA count from register. + */ + rt2400pci_bbp_read(rt2x00dev, 39, &bbp); + qual->false_cca = bbp; +} + +static inline void rt2400pci_set_vgc(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual, u8 vgc_level) +{ + if (qual->vgc_level_reg != vgc_level) { + rt2400pci_bbp_write(rt2x00dev, 13, vgc_level); + qual->vgc_level = vgc_level; + qual->vgc_level_reg = vgc_level; + } +} + +static void rt2400pci_reset_tuner(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual) +{ + rt2400pci_set_vgc(rt2x00dev, qual, 0x08); +} + +static void rt2400pci_link_tuner(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual, const u32 count) +{ + /* + * The link tuner should not run longer then 60 seconds, + * and should run once every 2 seconds. + */ + if (count > 60 || !(count & 1)) + return; + + /* + * Base r13 link tuning on the false cca count. + */ + if ((qual->false_cca > 512) && (qual->vgc_level < 0x20)) + rt2400pci_set_vgc(rt2x00dev, qual, ++qual->vgc_level); + else if ((qual->false_cca < 100) && (qual->vgc_level > 0x08)) + rt2400pci_set_vgc(rt2x00dev, qual, --qual->vgc_level); +} + +/* + * Queue handlers. + */ +static void rt2400pci_start_queue(struct data_queue *queue) +{ + struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; + u32 reg; + + switch (queue->qid) { + case QID_RX: + rt2x00mmio_register_read(rt2x00dev, RXCSR0, ®); + rt2x00_set_field32(®, RXCSR0_DISABLE_RX, 0); + rt2x00mmio_register_write(rt2x00dev, RXCSR0, reg); + break; + case QID_BEACON: + rt2x00mmio_register_read(rt2x00dev, CSR14, ®); + rt2x00_set_field32(®, CSR14_TSF_COUNT, 1); + rt2x00_set_field32(®, CSR14_TBCN, 1); + rt2x00_set_field32(®, CSR14_BEACON_GEN, 1); + rt2x00mmio_register_write(rt2x00dev, CSR14, reg); + break; + default: + break; + } +} + +static void rt2400pci_kick_queue(struct data_queue *queue) +{ + struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; + u32 reg; + + switch (queue->qid) { + case QID_AC_VO: + rt2x00mmio_register_read(rt2x00dev, TXCSR0, ®); + rt2x00_set_field32(®, TXCSR0_KICK_PRIO, 1); + rt2x00mmio_register_write(rt2x00dev, TXCSR0, reg); + break; + case QID_AC_VI: + rt2x00mmio_register_read(rt2x00dev, TXCSR0, ®); + rt2x00_set_field32(®, TXCSR0_KICK_TX, 1); + rt2x00mmio_register_write(rt2x00dev, TXCSR0, reg); + break; + case QID_ATIM: + rt2x00mmio_register_read(rt2x00dev, TXCSR0, ®); + rt2x00_set_field32(®, TXCSR0_KICK_ATIM, 1); + rt2x00mmio_register_write(rt2x00dev, TXCSR0, reg); + break; + default: + break; + } +} + +static void rt2400pci_stop_queue(struct data_queue *queue) +{ + struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; + u32 reg; + + switch (queue->qid) { + case QID_AC_VO: + case QID_AC_VI: + case QID_ATIM: + rt2x00mmio_register_read(rt2x00dev, TXCSR0, ®); + rt2x00_set_field32(®, TXCSR0_ABORT, 1); + rt2x00mmio_register_write(rt2x00dev, TXCSR0, reg); + break; + case QID_RX: + rt2x00mmio_register_read(rt2x00dev, RXCSR0, ®); + rt2x00_set_field32(®, RXCSR0_DISABLE_RX, 1); + rt2x00mmio_register_write(rt2x00dev, RXCSR0, reg); + break; + case QID_BEACON: + rt2x00mmio_register_read(rt2x00dev, CSR14, ®); + rt2x00_set_field32(®, CSR14_TSF_COUNT, 0); + rt2x00_set_field32(®, CSR14_TBCN, 0); + rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); + rt2x00mmio_register_write(rt2x00dev, CSR14, reg); + + /* + * Wait for possibly running tbtt tasklets. + */ + tasklet_kill(&rt2x00dev->tbtt_tasklet); + break; + default: + break; + } +} + +/* + * Initialization functions. + */ +static bool rt2400pci_get_entry_state(struct queue_entry *entry) +{ + struct queue_entry_priv_mmio *entry_priv = entry->priv_data; + u32 word; + + if (entry->queue->qid == QID_RX) { + rt2x00_desc_read(entry_priv->desc, 0, &word); + + return rt2x00_get_field32(word, RXD_W0_OWNER_NIC); + } else { + rt2x00_desc_read(entry_priv->desc, 0, &word); + + return (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || + rt2x00_get_field32(word, TXD_W0_VALID)); + } +} + +static void rt2400pci_clear_entry(struct queue_entry *entry) +{ + struct queue_entry_priv_mmio *entry_priv = entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + u32 word; + + if (entry->queue->qid == QID_RX) { + rt2x00_desc_read(entry_priv->desc, 2, &word); + rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH, entry->skb->len); + rt2x00_desc_write(entry_priv->desc, 2, word); + + rt2x00_desc_read(entry_priv->desc, 1, &word); + rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); + rt2x00_desc_write(entry_priv->desc, 1, word); + + rt2x00_desc_read(entry_priv->desc, 0, &word); + rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); + rt2x00_desc_write(entry_priv->desc, 0, word); + } else { + rt2x00_desc_read(entry_priv->desc, 0, &word); + rt2x00_set_field32(&word, TXD_W0_VALID, 0); + rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); + rt2x00_desc_write(entry_priv->desc, 0, word); + } +} + +static int rt2400pci_init_queues(struct rt2x00_dev *rt2x00dev) +{ + struct queue_entry_priv_mmio *entry_priv; + u32 reg; + + /* + * Initialize registers. + */ + rt2x00mmio_register_read(rt2x00dev, TXCSR2, ®); + rt2x00_set_field32(®, TXCSR2_TXD_SIZE, rt2x00dev->tx[0].desc_size); + rt2x00_set_field32(®, TXCSR2_NUM_TXD, rt2x00dev->tx[1].limit); + rt2x00_set_field32(®, TXCSR2_NUM_ATIM, rt2x00dev->atim->limit); + rt2x00_set_field32(®, TXCSR2_NUM_PRIO, rt2x00dev->tx[0].limit); + rt2x00mmio_register_write(rt2x00dev, TXCSR2, reg); + + entry_priv = rt2x00dev->tx[1].entries[0].priv_data; + rt2x00mmio_register_read(rt2x00dev, TXCSR3, ®); + rt2x00_set_field32(®, TXCSR3_TX_RING_REGISTER, + entry_priv->desc_dma); + rt2x00mmio_register_write(rt2x00dev, TXCSR3, reg); + + entry_priv = rt2x00dev->tx[0].entries[0].priv_data; + rt2x00mmio_register_read(rt2x00dev, TXCSR5, ®); + rt2x00_set_field32(®, TXCSR5_PRIO_RING_REGISTER, + entry_priv->desc_dma); + rt2x00mmio_register_write(rt2x00dev, TXCSR5, reg); + + entry_priv = rt2x00dev->atim->entries[0].priv_data; + rt2x00mmio_register_read(rt2x00dev, TXCSR4, ®); + rt2x00_set_field32(®, TXCSR4_ATIM_RING_REGISTER, + entry_priv->desc_dma); + rt2x00mmio_register_write(rt2x00dev, TXCSR4, reg); + + entry_priv = rt2x00dev->bcn->entries[0].priv_data; + rt2x00mmio_register_read(rt2x00dev, TXCSR6, ®); + rt2x00_set_field32(®, TXCSR6_BEACON_RING_REGISTER, + entry_priv->desc_dma); + rt2x00mmio_register_write(rt2x00dev, TXCSR6, reg); + + rt2x00mmio_register_read(rt2x00dev, RXCSR1, ®); + rt2x00_set_field32(®, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size); + rt2x00_set_field32(®, RXCSR1_NUM_RXD, rt2x00dev->rx->limit); + rt2x00mmio_register_write(rt2x00dev, RXCSR1, reg); + + entry_priv = rt2x00dev->rx->entries[0].priv_data; + rt2x00mmio_register_read(rt2x00dev, RXCSR2, ®); + rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, + entry_priv->desc_dma); + rt2x00mmio_register_write(rt2x00dev, RXCSR2, reg); + + return 0; +} + +static int rt2400pci_init_registers(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2x00mmio_register_write(rt2x00dev, PSCSR0, 0x00020002); + rt2x00mmio_register_write(rt2x00dev, PSCSR1, 0x00000002); + rt2x00mmio_register_write(rt2x00dev, PSCSR2, 0x00023f20); + rt2x00mmio_register_write(rt2x00dev, PSCSR3, 0x00000002); + + rt2x00mmio_register_read(rt2x00dev, TIMECSR, ®); + rt2x00_set_field32(®, TIMECSR_US_COUNT, 33); + rt2x00_set_field32(®, TIMECSR_US_64_COUNT, 63); + rt2x00_set_field32(®, TIMECSR_BEACON_EXPECT, 0); + rt2x00mmio_register_write(rt2x00dev, TIMECSR, reg); + + rt2x00mmio_register_read(rt2x00dev, CSR9, ®); + rt2x00_set_field32(®, CSR9_MAX_FRAME_UNIT, + (rt2x00dev->rx->data_size / 128)); + rt2x00mmio_register_write(rt2x00dev, CSR9, reg); + + rt2x00mmio_register_read(rt2x00dev, CSR14, ®); + rt2x00_set_field32(®, CSR14_TSF_COUNT, 0); + rt2x00_set_field32(®, CSR14_TSF_SYNC, 0); + rt2x00_set_field32(®, CSR14_TBCN, 0); + rt2x00_set_field32(®, CSR14_TCFP, 0); + rt2x00_set_field32(®, CSR14_TATIMW, 0); + rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); + rt2x00_set_field32(®, CSR14_CFP_COUNT_PRELOAD, 0); + rt2x00_set_field32(®, CSR14_TBCM_PRELOAD, 0); + rt2x00mmio_register_write(rt2x00dev, CSR14, reg); + + rt2x00mmio_register_write(rt2x00dev, CNT3, 0x3f080000); + + rt2x00mmio_register_read(rt2x00dev, ARCSR0, ®); + rt2x00_set_field32(®, ARCSR0_AR_BBP_DATA0, 133); + rt2x00_set_field32(®, ARCSR0_AR_BBP_ID0, 134); + rt2x00_set_field32(®, ARCSR0_AR_BBP_DATA1, 136); + rt2x00_set_field32(®, ARCSR0_AR_BBP_ID1, 135); + rt2x00mmio_register_write(rt2x00dev, ARCSR0, reg); + + rt2x00mmio_register_read(rt2x00dev, RXCSR3, ®); + rt2x00_set_field32(®, RXCSR3_BBP_ID0, 3); /* Tx power.*/ + rt2x00_set_field32(®, RXCSR3_BBP_ID0_VALID, 1); + rt2x00_set_field32(®, RXCSR3_BBP_ID1, 32); /* Signal */ + rt2x00_set_field32(®, RXCSR3_BBP_ID1_VALID, 1); + rt2x00_set_field32(®, RXCSR3_BBP_ID2, 36); /* Rssi */ + rt2x00_set_field32(®, RXCSR3_BBP_ID2_VALID, 1); + rt2x00mmio_register_write(rt2x00dev, RXCSR3, reg); + + rt2x00mmio_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100); + + if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) + return -EBUSY; + + rt2x00mmio_register_write(rt2x00dev, MACCSR0, 0x00217223); + rt2x00mmio_register_write(rt2x00dev, MACCSR1, 0x00235518); + + rt2x00mmio_register_read(rt2x00dev, MACCSR2, ®); + rt2x00_set_field32(®, MACCSR2_DELAY, 64); + rt2x00mmio_register_write(rt2x00dev, MACCSR2, reg); + + rt2x00mmio_register_read(rt2x00dev, RALINKCSR, ®); + rt2x00_set_field32(®, RALINKCSR_AR_BBP_DATA0, 17); + rt2x00_set_field32(®, RALINKCSR_AR_BBP_ID0, 154); + rt2x00_set_field32(®, RALINKCSR_AR_BBP_DATA1, 0); + rt2x00_set_field32(®, RALINKCSR_AR_BBP_ID1, 154); + rt2x00mmio_register_write(rt2x00dev, RALINKCSR, reg); + + rt2x00mmio_register_read(rt2x00dev, CSR1, ®); + rt2x00_set_field32(®, CSR1_SOFT_RESET, 1); + rt2x00_set_field32(®, CSR1_BBP_RESET, 0); + rt2x00_set_field32(®, CSR1_HOST_READY, 0); + rt2x00mmio_register_write(rt2x00dev, CSR1, reg); + + rt2x00mmio_register_read(rt2x00dev, CSR1, ®); + rt2x00_set_field32(®, CSR1_SOFT_RESET, 0); + rt2x00_set_field32(®, CSR1_HOST_READY, 1); + rt2x00mmio_register_write(rt2x00dev, CSR1, reg); + + /* + * We must clear the FCS and FIFO error count. + * These registers are cleared on read, + * so we may pass a useless variable to store the value. + */ + rt2x00mmio_register_read(rt2x00dev, CNT0, ®); + rt2x00mmio_register_read(rt2x00dev, CNT4, ®); + + return 0; +} + +static int rt2400pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u8 value; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2400pci_bbp_read(rt2x00dev, 0, &value); + if ((value != 0xff) && (value != 0x00)) + return 0; + udelay(REGISTER_BUSY_DELAY); + } + + rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n"); + return -EACCES; +} + +static int rt2400pci_init_bbp(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u16 eeprom; + u8 reg_id; + u8 value; + + if (unlikely(rt2400pci_wait_bbp_ready(rt2x00dev))) + return -EACCES; + + rt2400pci_bbp_write(rt2x00dev, 1, 0x00); + rt2400pci_bbp_write(rt2x00dev, 3, 0x27); + rt2400pci_bbp_write(rt2x00dev, 4, 0x08); + rt2400pci_bbp_write(rt2x00dev, 10, 0x0f); + rt2400pci_bbp_write(rt2x00dev, 15, 0x72); + rt2400pci_bbp_write(rt2x00dev, 16, 0x74); + rt2400pci_bbp_write(rt2x00dev, 17, 0x20); + rt2400pci_bbp_write(rt2x00dev, 18, 0x72); + rt2400pci_bbp_write(rt2x00dev, 19, 0x0b); + rt2400pci_bbp_write(rt2x00dev, 20, 0x00); + rt2400pci_bbp_write(rt2x00dev, 28, 0x11); + rt2400pci_bbp_write(rt2x00dev, 29, 0x04); + rt2400pci_bbp_write(rt2x00dev, 30, 0x21); + rt2400pci_bbp_write(rt2x00dev, 31, 0x00); + + for (i = 0; i < EEPROM_BBP_SIZE; i++) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); + + if (eeprom != 0xffff && eeprom != 0x0000) { + reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); + value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); + rt2400pci_bbp_write(rt2x00dev, reg_id, value); + } + } + + return 0; +} + +/* + * Device state switch handlers. + */ +static void rt2400pci_toggle_irq(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + int mask = (state == STATE_RADIO_IRQ_OFF); + u32 reg; + unsigned long flags; + + /* + * When interrupts are being enabled, the interrupt registers + * should clear the register to assure a clean state. + */ + if (state == STATE_RADIO_IRQ_ON) { + rt2x00mmio_register_read(rt2x00dev, CSR7, ®); + rt2x00mmio_register_write(rt2x00dev, CSR7, reg); + } + + /* + * Only toggle the interrupts bits we are going to use. + * Non-checked interrupt bits are disabled by default. + */ + spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags); + + rt2x00mmio_register_read(rt2x00dev, CSR8, ®); + rt2x00_set_field32(®, CSR8_TBCN_EXPIRE, mask); + rt2x00_set_field32(®, CSR8_TXDONE_TXRING, mask); + rt2x00_set_field32(®, CSR8_TXDONE_ATIMRING, mask); + rt2x00_set_field32(®, CSR8_TXDONE_PRIORING, mask); + rt2x00_set_field32(®, CSR8_RXDONE, mask); + rt2x00mmio_register_write(rt2x00dev, CSR8, reg); + + spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags); + + if (state == STATE_RADIO_IRQ_OFF) { + /* + * Ensure that all tasklets are finished before + * disabling the interrupts. + */ + tasklet_kill(&rt2x00dev->txstatus_tasklet); + tasklet_kill(&rt2x00dev->rxdone_tasklet); + tasklet_kill(&rt2x00dev->tbtt_tasklet); + } +} + +static int rt2400pci_enable_radio(struct rt2x00_dev *rt2x00dev) +{ + /* + * Initialize all registers. + */ + if (unlikely(rt2400pci_init_queues(rt2x00dev) || + rt2400pci_init_registers(rt2x00dev) || + rt2400pci_init_bbp(rt2x00dev))) + return -EIO; + + return 0; +} + +static void rt2400pci_disable_radio(struct rt2x00_dev *rt2x00dev) +{ + /* + * Disable power + */ + rt2x00mmio_register_write(rt2x00dev, PWRCSR0, 0); +} + +static int rt2400pci_set_state(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + u32 reg, reg2; + unsigned int i; + char put_to_sleep; + char bbp_state; + char rf_state; + + put_to_sleep = (state != STATE_AWAKE); + + rt2x00mmio_register_read(rt2x00dev, PWRCSR1, ®); + rt2x00_set_field32(®, PWRCSR1_SET_STATE, 1); + rt2x00_set_field32(®, PWRCSR1_BBP_DESIRE_STATE, state); + rt2x00_set_field32(®, PWRCSR1_RF_DESIRE_STATE, state); + rt2x00_set_field32(®, PWRCSR1_PUT_TO_SLEEP, put_to_sleep); + rt2x00mmio_register_write(rt2x00dev, PWRCSR1, reg); + + /* + * Device is not guaranteed to be in the requested state yet. + * We must wait until the register indicates that the + * device has entered the correct state. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2x00mmio_register_read(rt2x00dev, PWRCSR1, ®2); + bbp_state = rt2x00_get_field32(reg2, PWRCSR1_BBP_CURR_STATE); + rf_state = rt2x00_get_field32(reg2, PWRCSR1_RF_CURR_STATE); + if (bbp_state == state && rf_state == state) + return 0; + rt2x00mmio_register_write(rt2x00dev, PWRCSR1, reg); + msleep(10); + } + + return -EBUSY; +} + +static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + int retval = 0; + + switch (state) { + case STATE_RADIO_ON: + retval = rt2400pci_enable_radio(rt2x00dev); + break; + case STATE_RADIO_OFF: + rt2400pci_disable_radio(rt2x00dev); + break; + case STATE_RADIO_IRQ_ON: + case STATE_RADIO_IRQ_OFF: + rt2400pci_toggle_irq(rt2x00dev, state); + break; + case STATE_DEEP_SLEEP: + case STATE_SLEEP: + case STATE_STANDBY: + case STATE_AWAKE: + retval = rt2400pci_set_state(rt2x00dev, state); + break; + default: + retval = -ENOTSUPP; + break; + } + + if (unlikely(retval)) + rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n", + state, retval); + + return retval; +} + +/* + * TX descriptor initialization + */ +static void rt2400pci_write_tx_desc(struct queue_entry *entry, + struct txentry_desc *txdesc) +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + struct queue_entry_priv_mmio *entry_priv = entry->priv_data; + __le32 *txd = entry_priv->desc; + u32 word; + + /* + * Start writing the descriptor words. + */ + rt2x00_desc_read(txd, 1, &word); + rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); + rt2x00_desc_write(txd, 1, word); + + rt2x00_desc_read(txd, 2, &word); + rt2x00_set_field32(&word, TXD_W2_BUFFER_LENGTH, txdesc->length); + rt2x00_set_field32(&word, TXD_W2_DATABYTE_COUNT, txdesc->length); + rt2x00_desc_write(txd, 2, word); + + rt2x00_desc_read(txd, 3, &word); + rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, txdesc->u.plcp.signal); + rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL_REGNUM, 5); + rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL_BUSY, 1); + rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, txdesc->u.plcp.service); + rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE_REGNUM, 6); + rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE_BUSY, 1); + rt2x00_desc_write(txd, 3, word); + + rt2x00_desc_read(txd, 4, &word); + rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_LOW, + txdesc->u.plcp.length_low); + rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW_REGNUM, 8); + rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW_BUSY, 1); + rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_HIGH, + txdesc->u.plcp.length_high); + rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH_REGNUM, 7); + rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH_BUSY, 1); + rt2x00_desc_write(txd, 4, word); + + /* + * Writing TXD word 0 must the last to prevent a race condition with + * the device, whereby the device may take hold of the TXD before we + * finished updating it. + */ + rt2x00_desc_read(txd, 0, &word); + rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1); + rt2x00_set_field32(&word, TXD_W0_VALID, 1); + rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, + test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_ACK, + test_bit(ENTRY_TXD_ACK, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, + test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_RTS, + test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->u.plcp.ifs); + rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, + test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); + rt2x00_desc_write(txd, 0, word); + + /* + * Register descriptor details in skb frame descriptor. + */ + skbdesc->desc = txd; + skbdesc->desc_len = TXD_DESC_SIZE; +} + +/* + * TX data initialization + */ +static void rt2400pci_write_beacon(struct queue_entry *entry, + struct txentry_desc *txdesc) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + u32 reg; + + /* + * Disable beaconing while we are reloading the beacon data, + * otherwise we might be sending out invalid data. + */ + rt2x00mmio_register_read(rt2x00dev, CSR14, ®); + rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); + rt2x00mmio_register_write(rt2x00dev, CSR14, reg); + + if (rt2x00queue_map_txskb(entry)) { + rt2x00_err(rt2x00dev, "Fail to map beacon, aborting\n"); + goto out; + } + /* + * Enable beaconing again. + */ + rt2x00_set_field32(®, CSR14_BEACON_GEN, 1); + /* + * Write the TX descriptor for the beacon. + */ + rt2400pci_write_tx_desc(entry, txdesc); + + /* + * Dump beacon to userspace through debugfs. + */ + rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb); +out: + /* + * Enable beaconing again. + */ + rt2x00_set_field32(®, CSR14_BEACON_GEN, 1); + rt2x00mmio_register_write(rt2x00dev, CSR14, reg); +} + +/* + * RX control handlers + */ +static void rt2400pci_fill_rxdone(struct queue_entry *entry, + struct rxdone_entry_desc *rxdesc) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct queue_entry_priv_mmio *entry_priv = entry->priv_data; + u32 word0; + u32 word2; + u32 word3; + u32 word4; + u64 tsf; + u32 rx_low; + u32 rx_high; + + rt2x00_desc_read(entry_priv->desc, 0, &word0); + rt2x00_desc_read(entry_priv->desc, 2, &word2); + rt2x00_desc_read(entry_priv->desc, 3, &word3); + rt2x00_desc_read(entry_priv->desc, 4, &word4); + + if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) + rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; + if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR)) + rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC; + + /* + * We only get the lower 32bits from the timestamp, + * to get the full 64bits we must complement it with + * the timestamp from get_tsf(). + * Note that when a wraparound of the lower 32bits + * has occurred between the frame arrival and the get_tsf() + * call, we must decrease the higher 32bits with 1 to get + * to correct value. + */ + tsf = rt2x00dev->ops->hw->get_tsf(rt2x00dev->hw, NULL); + rx_low = rt2x00_get_field32(word4, RXD_W4_RX_END_TIME); + rx_high = upper_32_bits(tsf); + + if ((u32)tsf <= rx_low) + rx_high--; + + /* + * Obtain the status about this packet. + * The signal is the PLCP value, and needs to be stripped + * of the preamble bit (0x08). + */ + rxdesc->timestamp = ((u64)rx_high << 32) | rx_low; + rxdesc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL) & ~0x08; + rxdesc->rssi = rt2x00_get_field32(word3, RXD_W3_RSSI) - + entry->queue->rt2x00dev->rssi_offset; + rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); + + rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; + if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) + rxdesc->dev_flags |= RXDONE_MY_BSS; +} + +/* + * Interrupt functions. + */ +static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev, + const enum data_queue_qid queue_idx) +{ + struct data_queue *queue = rt2x00queue_get_tx_queue(rt2x00dev, queue_idx); + struct queue_entry_priv_mmio *entry_priv; + struct queue_entry *entry; + struct txdone_entry_desc txdesc; + u32 word; + + while (!rt2x00queue_empty(queue)) { + entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); + entry_priv = entry->priv_data; + rt2x00_desc_read(entry_priv->desc, 0, &word); + + if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || + !rt2x00_get_field32(word, TXD_W0_VALID)) + break; + + /* + * Obtain the status about this packet. + */ + txdesc.flags = 0; + switch (rt2x00_get_field32(word, TXD_W0_RESULT)) { + case 0: /* Success */ + case 1: /* Success with retry */ + __set_bit(TXDONE_SUCCESS, &txdesc.flags); + break; + case 2: /* Failure, excessive retries */ + __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags); + /* Don't break, this is a failed frame! */ + default: /* Failure */ + __set_bit(TXDONE_FAILURE, &txdesc.flags); + } + txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT); + + rt2x00lib_txdone(entry, &txdesc); + } +} + +static inline void rt2400pci_enable_interrupt(struct rt2x00_dev *rt2x00dev, + struct rt2x00_field32 irq_field) +{ + u32 reg; + + /* + * Enable a single interrupt. The interrupt mask register + * access needs locking. + */ + spin_lock_irq(&rt2x00dev->irqmask_lock); + + rt2x00mmio_register_read(rt2x00dev, CSR8, ®); + rt2x00_set_field32(®, irq_field, 0); + rt2x00mmio_register_write(rt2x00dev, CSR8, reg); + + spin_unlock_irq(&rt2x00dev->irqmask_lock); +} + +static void rt2400pci_txstatus_tasklet(unsigned long data) +{ + struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; + u32 reg; + + /* + * Handle all tx queues. + */ + rt2400pci_txdone(rt2x00dev, QID_ATIM); + rt2400pci_txdone(rt2x00dev, QID_AC_VO); + rt2400pci_txdone(rt2x00dev, QID_AC_VI); + + /* + * Enable all TXDONE interrupts again. + */ + if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) { + spin_lock_irq(&rt2x00dev->irqmask_lock); + + rt2x00mmio_register_read(rt2x00dev, CSR8, ®); + rt2x00_set_field32(®, CSR8_TXDONE_TXRING, 0); + rt2x00_set_field32(®, CSR8_TXDONE_ATIMRING, 0); + rt2x00_set_field32(®, CSR8_TXDONE_PRIORING, 0); + rt2x00mmio_register_write(rt2x00dev, CSR8, reg); + + spin_unlock_irq(&rt2x00dev->irqmask_lock); + } +} + +static void rt2400pci_tbtt_tasklet(unsigned long data) +{ + struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; + rt2x00lib_beacondone(rt2x00dev); + if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) + rt2400pci_enable_interrupt(rt2x00dev, CSR8_TBCN_EXPIRE); +} + +static void rt2400pci_rxdone_tasklet(unsigned long data) +{ + struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; + if (rt2x00mmio_rxdone(rt2x00dev)) + tasklet_schedule(&rt2x00dev->rxdone_tasklet); + else if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) + rt2400pci_enable_interrupt(rt2x00dev, CSR8_RXDONE); +} + +static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance) +{ + struct rt2x00_dev *rt2x00dev = dev_instance; + u32 reg, mask; + + /* + * Get the interrupt sources & saved to local variable. + * Write register value back to clear pending interrupts. + */ + rt2x00mmio_register_read(rt2x00dev, CSR7, ®); + rt2x00mmio_register_write(rt2x00dev, CSR7, reg); + + if (!reg) + return IRQ_NONE; + + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) + return IRQ_HANDLED; + + mask = reg; + + /* + * Schedule tasklets for interrupt handling. + */ + if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE)) + tasklet_hi_schedule(&rt2x00dev->tbtt_tasklet); + + if (rt2x00_get_field32(reg, CSR7_RXDONE)) + tasklet_schedule(&rt2x00dev->rxdone_tasklet); + + if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING) || + rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING) || + rt2x00_get_field32(reg, CSR7_TXDONE_TXRING)) { + tasklet_schedule(&rt2x00dev->txstatus_tasklet); + /* + * Mask out all txdone interrupts. + */ + rt2x00_set_field32(&mask, CSR8_TXDONE_TXRING, 1); + rt2x00_set_field32(&mask, CSR8_TXDONE_ATIMRING, 1); + rt2x00_set_field32(&mask, CSR8_TXDONE_PRIORING, 1); + } + + /* + * Disable all interrupts for which a tasklet was scheduled right now, + * the tasklet will reenable the appropriate interrupts. + */ + spin_lock(&rt2x00dev->irqmask_lock); + + rt2x00mmio_register_read(rt2x00dev, CSR8, ®); + reg |= mask; + rt2x00mmio_register_write(rt2x00dev, CSR8, reg); + + spin_unlock(&rt2x00dev->irqmask_lock); + + + + return IRQ_HANDLED; +} + +/* + * Device probe functions. + */ +static int rt2400pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) +{ + struct eeprom_93cx6 eeprom; + u32 reg; + u16 word; + u8 *mac; + + rt2x00mmio_register_read(rt2x00dev, CSR21, ®); + + eeprom.data = rt2x00dev; + eeprom.register_read = rt2400pci_eepromregister_read; + eeprom.register_write = rt2400pci_eepromregister_write; + eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ? + PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66; + eeprom.reg_data_in = 0; + eeprom.reg_data_out = 0; + eeprom.reg_data_clock = 0; + eeprom.reg_chip_select = 0; + + eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, + EEPROM_SIZE / sizeof(u16)); + + /* + * Start validation of the data that has been read. + */ + mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); + if (!is_valid_ether_addr(mac)) { + eth_random_addr(mac); + rt2x00_eeprom_dbg(rt2x00dev, "MAC: %pM\n", mac); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); + if (word == 0xffff) { + rt2x00_err(rt2x00dev, "Invalid EEPROM data detected\n"); + return -EINVAL; + } + + return 0; +} + +static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + u16 value; + u16 eeprom; + + /* + * Read EEPROM word for configuration. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); + + /* + * Identify RF chipset. + */ + value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); + rt2x00mmio_register_read(rt2x00dev, CSR0, ®); + rt2x00_set_chip(rt2x00dev, RT2460, value, + rt2x00_get_field32(reg, CSR0_REVISION)); + + if (!rt2x00_rf(rt2x00dev, RF2420) && !rt2x00_rf(rt2x00dev, RF2421)) { + rt2x00_err(rt2x00dev, "Invalid RF chipset detected\n"); + return -ENODEV; + } + + /* + * Identify default antenna configuration. + */ + rt2x00dev->default_ant.tx = + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); + rt2x00dev->default_ant.rx = + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); + + /* + * When the eeprom indicates SW_DIVERSITY use HW_DIVERSITY instead. + * I am not 100% sure about this, but the legacy drivers do not + * indicate antenna swapping in software is required when + * diversity is enabled. + */ + if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY) + rt2x00dev->default_ant.tx = ANTENNA_HW_DIVERSITY; + if (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY) + rt2x00dev->default_ant.rx = ANTENNA_HW_DIVERSITY; + + /* + * Store led mode, for correct led behaviour. + */ +#ifdef CONFIG_RT2X00_LIB_LEDS + value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); + + rt2400pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); + if (value == LED_MODE_TXRX_ACTIVITY || + value == LED_MODE_DEFAULT || + value == LED_MODE_ASUS) + rt2400pci_init_led(rt2x00dev, &rt2x00dev->led_qual, + LED_TYPE_ACTIVITY); +#endif /* CONFIG_RT2X00_LIB_LEDS */ + + /* + * Detect if this device has an hardware controlled radio. + */ + if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) + __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags); + + /* + * Check if the BBP tuning should be enabled. + */ + if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_AGCVGC_TUNING)) + __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags); + + return 0; +} + +/* + * RF value list for RF2420 & RF2421 + * Supports: 2.4 GHz + */ +static const struct rf_channel rf_vals_b[] = { + { 1, 0x00022058, 0x000c1fda, 0x00000101, 0 }, + { 2, 0x00022058, 0x000c1fee, 0x00000101, 0 }, + { 3, 0x00022058, 0x000c2002, 0x00000101, 0 }, + { 4, 0x00022058, 0x000c2016, 0x00000101, 0 }, + { 5, 0x00022058, 0x000c202a, 0x00000101, 0 }, + { 6, 0x00022058, 0x000c203e, 0x00000101, 0 }, + { 7, 0x00022058, 0x000c2052, 0x00000101, 0 }, + { 8, 0x00022058, 0x000c2066, 0x00000101, 0 }, + { 9, 0x00022058, 0x000c207a, 0x00000101, 0 }, + { 10, 0x00022058, 0x000c208e, 0x00000101, 0 }, + { 11, 0x00022058, 0x000c20a2, 0x00000101, 0 }, + { 12, 0x00022058, 0x000c20b6, 0x00000101, 0 }, + { 13, 0x00022058, 0x000c20ca, 0x00000101, 0 }, + { 14, 0x00022058, 0x000c20fa, 0x00000101, 0 }, +}; + +static int rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +{ + struct hw_mode_spec *spec = &rt2x00dev->spec; + struct channel_info *info; + char *tx_power; + unsigned int i; + + /* + * Initialize all hw fields. + */ + ieee80211_hw_set(rt2x00dev->hw, PS_NULLFUNC_STACK); + ieee80211_hw_set(rt2x00dev->hw, SUPPORTS_PS); + ieee80211_hw_set(rt2x00dev->hw, HOST_BROADCAST_PS_BUFFERING); + ieee80211_hw_set(rt2x00dev->hw, SIGNAL_DBM); + + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); + SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, + rt2x00_eeprom_addr(rt2x00dev, + EEPROM_MAC_ADDR_0)); + + /* + * Initialize hw_mode information. + */ + spec->supported_bands = SUPPORT_BAND_2GHZ; + spec->supported_rates = SUPPORT_RATE_CCK; + + spec->num_channels = ARRAY_SIZE(rf_vals_b); + spec->channels = rf_vals_b; + + /* + * Create channel information array + */ + info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + spec->channels_info = info; + + tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); + for (i = 0; i < 14; i++) { + info[i].max_power = TXPOWER_FROM_DEV(MAX_TXPOWER); + info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]); + } + + return 0; +} + +static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev) +{ + int retval; + u32 reg; + + /* + * Allocate eeprom data. + */ + retval = rt2400pci_validate_eeprom(rt2x00dev); + if (retval) + return retval; + + retval = rt2400pci_init_eeprom(rt2x00dev); + if (retval) + return retval; + + /* + * Enable rfkill polling by setting GPIO direction of the + * rfkill switch GPIO pin correctly. + */ + rt2x00mmio_register_read(rt2x00dev, GPIOCSR, ®); + rt2x00_set_field32(®, GPIOCSR_DIR0, 1); + rt2x00mmio_register_write(rt2x00dev, GPIOCSR, reg); + + /* + * Initialize hw specifications. + */ + retval = rt2400pci_probe_hw_mode(rt2x00dev); + if (retval) + return retval; + + /* + * This device requires the atim queue and DMA-mapped skbs. + */ + __set_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags); + __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags); + __set_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags); + + /* + * Set the rssi offset. + */ + rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; + + return 0; +} + +/* + * IEEE80211 stack callback functions. + */ +static int rt2400pci_conf_tx(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, u16 queue, + const struct ieee80211_tx_queue_params *params) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + + /* + * We don't support variating cw_min and cw_max variables + * per queue. So by default we only configure the TX queue, + * and ignore all other configurations. + */ + if (queue != 0) + return -EINVAL; + + if (rt2x00mac_conf_tx(hw, vif, queue, params)) + return -EINVAL; + + /* + * Write configuration to register. + */ + rt2400pci_config_cw(rt2x00dev, + rt2x00dev->tx->cw_min, rt2x00dev->tx->cw_max); + + return 0; +} + +static u64 rt2400pci_get_tsf(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u64 tsf; + u32 reg; + + rt2x00mmio_register_read(rt2x00dev, CSR17, ®); + tsf = (u64) rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32; + rt2x00mmio_register_read(rt2x00dev, CSR16, ®); + tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER); + + return tsf; +} + +static int rt2400pci_tx_last_beacon(struct ieee80211_hw *hw) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u32 reg; + + rt2x00mmio_register_read(rt2x00dev, CSR15, ®); + return rt2x00_get_field32(reg, CSR15_BEACON_SENT); +} + +static const struct ieee80211_ops rt2400pci_mac80211_ops = { + .tx = rt2x00mac_tx, + .start = rt2x00mac_start, + .stop = rt2x00mac_stop, + .add_interface = rt2x00mac_add_interface, + .remove_interface = rt2x00mac_remove_interface, + .config = rt2x00mac_config, + .configure_filter = rt2x00mac_configure_filter, + .sw_scan_start = rt2x00mac_sw_scan_start, + .sw_scan_complete = rt2x00mac_sw_scan_complete, + .get_stats = rt2x00mac_get_stats, + .bss_info_changed = rt2x00mac_bss_info_changed, + .conf_tx = rt2400pci_conf_tx, + .get_tsf = rt2400pci_get_tsf, + .tx_last_beacon = rt2400pci_tx_last_beacon, + .rfkill_poll = rt2x00mac_rfkill_poll, + .flush = rt2x00mac_flush, + .set_antenna = rt2x00mac_set_antenna, + .get_antenna = rt2x00mac_get_antenna, + .get_ringparam = rt2x00mac_get_ringparam, + .tx_frames_pending = rt2x00mac_tx_frames_pending, +}; + +static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = { + .irq_handler = rt2400pci_interrupt, + .txstatus_tasklet = rt2400pci_txstatus_tasklet, + .tbtt_tasklet = rt2400pci_tbtt_tasklet, + .rxdone_tasklet = rt2400pci_rxdone_tasklet, + .probe_hw = rt2400pci_probe_hw, + .initialize = rt2x00mmio_initialize, + .uninitialize = rt2x00mmio_uninitialize, + .get_entry_state = rt2400pci_get_entry_state, + .clear_entry = rt2400pci_clear_entry, + .set_device_state = rt2400pci_set_device_state, + .rfkill_poll = rt2400pci_rfkill_poll, + .link_stats = rt2400pci_link_stats, + .reset_tuner = rt2400pci_reset_tuner, + .link_tuner = rt2400pci_link_tuner, + .start_queue = rt2400pci_start_queue, + .kick_queue = rt2400pci_kick_queue, + .stop_queue = rt2400pci_stop_queue, + .flush_queue = rt2x00mmio_flush_queue, + .write_tx_desc = rt2400pci_write_tx_desc, + .write_beacon = rt2400pci_write_beacon, + .fill_rxdone = rt2400pci_fill_rxdone, + .config_filter = rt2400pci_config_filter, + .config_intf = rt2400pci_config_intf, + .config_erp = rt2400pci_config_erp, + .config_ant = rt2400pci_config_ant, + .config = rt2400pci_config, +}; + +static void rt2400pci_queue_init(struct data_queue *queue) +{ + switch (queue->qid) { + case QID_RX: + queue->limit = 24; + queue->data_size = DATA_FRAME_SIZE; + queue->desc_size = RXD_DESC_SIZE; + queue->priv_size = sizeof(struct queue_entry_priv_mmio); + break; + + case QID_AC_VO: + case QID_AC_VI: + case QID_AC_BE: + case QID_AC_BK: + queue->limit = 24; + queue->data_size = DATA_FRAME_SIZE; + queue->desc_size = TXD_DESC_SIZE; + queue->priv_size = sizeof(struct queue_entry_priv_mmio); + break; + + case QID_BEACON: + queue->limit = 1; + queue->data_size = MGMT_FRAME_SIZE; + queue->desc_size = TXD_DESC_SIZE; + queue->priv_size = sizeof(struct queue_entry_priv_mmio); + break; + + case QID_ATIM: + queue->limit = 8; + queue->data_size = DATA_FRAME_SIZE; + queue->desc_size = TXD_DESC_SIZE; + queue->priv_size = sizeof(struct queue_entry_priv_mmio); + break; + + default: + BUG(); + break; + } +} + +static const struct rt2x00_ops rt2400pci_ops = { + .name = KBUILD_MODNAME, + .max_ap_intf = 1, + .eeprom_size = EEPROM_SIZE, + .rf_size = RF_SIZE, + .tx_queues = NUM_TX_QUEUES, + .queue_init = rt2400pci_queue_init, + .lib = &rt2400pci_rt2x00_ops, + .hw = &rt2400pci_mac80211_ops, +#ifdef CONFIG_RT2X00_LIB_DEBUGFS + .debugfs = &rt2400pci_rt2x00debug, +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ +}; + +/* + * RT2400pci module information. + */ +static const struct pci_device_id rt2400pci_device_table[] = { + { PCI_DEVICE(0x1814, 0x0101) }, + { 0, } +}; + + +MODULE_AUTHOR(DRV_PROJECT); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("Ralink RT2400 PCI & PCMCIA Wireless LAN driver."); +MODULE_SUPPORTED_DEVICE("Ralink RT2460 PCI & PCMCIA chipset based cards"); +MODULE_DEVICE_TABLE(pci, rt2400pci_device_table); +MODULE_LICENSE("GPL"); + +static int rt2400pci_probe(struct pci_dev *pci_dev, + const struct pci_device_id *id) +{ + return rt2x00pci_probe(pci_dev, &rt2400pci_ops); +} + +static struct pci_driver rt2400pci_driver = { + .name = KBUILD_MODNAME, + .id_table = rt2400pci_device_table, + .probe = rt2400pci_probe, + .remove = rt2x00pci_remove, + .suspend = rt2x00pci_suspend, + .resume = rt2x00pci_resume, +}; + +module_pci_driver(rt2400pci_driver); |
