diff options
Diffstat (limited to 'drivers/net/ethernet/davicom/dm9000.c')
| -rw-r--r-- | drivers/net/ethernet/davicom/dm9000.c | 16 |
1 files changed, 5 insertions, 11 deletions
diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 1bdf69985c13..a10671ecbf81 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -187,13 +187,13 @@ dm9000_reset(board_info_t *db) * The essential point is that we have to do a double reset, and the * instruction is to set LBK into MAC internal loopback mode. */ - iow(db, DM9000_NCR, 0x03); + iow(db, DM9000_NCR, NCR_RST | NCR_MAC_LBK); udelay(100); /* Application note says at least 20 us */ if (ior(db, DM9000_NCR) & 1) dev_err(db->dev, "dm9000 did not respond to first reset\n"); iow(db, DM9000_NCR, 0); - iow(db, DM9000_NCR, 0x03); + iow(db, DM9000_NCR, NCR_RST | NCR_MAC_LBK); udelay(100); if (ior(db, DM9000_NCR) & 1) dev_err(db->dev, "dm9000 did not respond to second reset\n"); @@ -894,6 +894,8 @@ dm9000_init_dm9000(struct net_device *dev) dm9000_dbg(db, 1, "entering %s\n", __func__); + dm9000_reset(db); + /* I/O mode */ db->io_mode = ior(db, DM9000_ISR) >> 6; /* ISR bit7:6 keeps I/O mode */ @@ -962,7 +964,6 @@ static void dm9000_timeout(struct net_device *dev) reg_save = readb(db->io_addr); netif_stop_queue(dev); - dm9000_reset(db); dm9000_init_dm9000(dev); /* We can accept TX packets again */ dev->trans_start = jiffies; /* prevent tx timeout */ @@ -1304,7 +1305,6 @@ dm9000_open(struct net_device *dev) mdelay(1); /* delay needs by DM9000B */ /* Initialize DM9000 board */ - dm9000_reset(db); dm9000_init_dm9000(dev); if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev)) @@ -1550,12 +1550,7 @@ dm9000_probe(struct platform_device *pdev) db->flags |= DM9000_PLATF_SIMPLE_PHY; #endif - /* Fixing bug on dm9000_probe, takeover dm9000_reset(db), - * Need 'NCR_MAC_LBK' bit to indeed stable our DM9000 fifo - * while probe stage. - */ - - iow(db, DM9000_NCR, NCR_MAC_LBK | NCR_RST); + dm9000_reset(db); /* try multiple times, DM9000 sometimes gets the read wrong */ for (i = 0; i < 8; i++) { @@ -1698,7 +1693,6 @@ dm9000_drv_resume(struct device *dev) /* reset if we were not in wake mode to ensure if * the device was powered off it is in a known state */ if (!db->wake_state) { - dm9000_reset(db); dm9000_init_dm9000(ndev); } |
