summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/broadcom/genet/bcmmii.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/broadcom/genet/bcmmii.c')
-rw-r--r--drivers/net/ethernet/broadcom/genet/bcmmii.c34
1 files changed, 7 insertions, 27 deletions
diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index 18f5723be2c9..5333274a283c 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -34,7 +34,7 @@
void bcmgenet_mii_setup(struct net_device *dev)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
- struct phy_device *phydev = priv->phydev;
+ struct phy_device *phydev = dev->phydev;
u32 reg, cmd_bits = 0;
bool status_changed = false;
@@ -121,22 +121,6 @@ static int bcmgenet_fixed_phy_link_update(struct net_device *dev,
return 0;
}
-/* Perform a voluntary PHY software reset, since the EPHY is very finicky about
- * not doing it and will start corrupting packets
- */
-void bcmgenet_mii_reset(struct net_device *dev)
-{
- struct bcmgenet_priv *priv = netdev_priv(dev);
-
- if (GENET_IS_V4(priv))
- return;
-
- if (priv->phydev) {
- phy_init_hw(priv->phydev);
- phy_start_aneg(priv->phydev);
- }
-}
-
void bcmgenet_phy_power_set(struct net_device *dev, bool enable)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
@@ -182,14 +166,14 @@ static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv)
}
if (priv->hw_params->flags & GENET_HAS_MOCA_LINK_DET)
- fixed_phy_set_link_update(priv->phydev,
+ fixed_phy_set_link_update(priv->dev->phydev,
bcmgenet_fixed_phy_link_update);
}
int bcmgenet_mii_config(struct net_device *dev, bool init)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
- struct phy_device *phydev = priv->phydev;
+ struct phy_device *phydev = dev->phydev;
struct device *kdev = &priv->pdev->dev;
const char *phy_name = NULL;
u32 id_mode_dis = 0;
@@ -236,7 +220,7 @@ int bcmgenet_mii_config(struct net_device *dev, bool init)
* capabilities, use that knowledge to also configure the
* Reverse MII interface correctly.
*/
- if ((priv->phydev->supported & PHY_BASIC_FEATURES) ==
+ if ((dev->phydev->supported & PHY_BASIC_FEATURES) ==
PHY_BASIC_FEATURES)
port_ctrl = PORT_MODE_EXT_RVMII_25;
else
@@ -306,7 +290,7 @@ int bcmgenet_mii_probe(struct net_device *dev)
return -ENODEV;
}
} else {
- phydev = priv->phydev;
+ phydev = dev->phydev;
phydev->dev_flags = phy_flags;
ret = phy_connect_direct(dev, phydev, bcmgenet_mii_setup,
@@ -317,8 +301,6 @@ int bcmgenet_mii_probe(struct net_device *dev)
}
}
- priv->phydev = phydev;
-
/* Configure port multiplexer based on what the probed PHY device since
* reading the 'max-speed' property determines the maximum supported
* PHY speed which is needed for bcmgenet_mii_config() to configure
@@ -326,7 +308,7 @@ int bcmgenet_mii_probe(struct net_device *dev)
*/
ret = bcmgenet_mii_config(dev, true);
if (ret) {
- phy_disconnect(priv->phydev);
+ phy_disconnect(dev->phydev);
return ret;
}
@@ -336,7 +318,7 @@ int bcmgenet_mii_probe(struct net_device *dev)
* Ethernet MAC ISRs
*/
if (priv->internal_phy)
- priv->phydev->irq = PHY_IGNORE_INTERRUPT;
+ dev->phydev->irq = PHY_IGNORE_INTERRUPT;
return 0;
}
@@ -545,7 +527,6 @@ static int bcmgenet_mii_pd_init(struct bcmgenet_priv *priv)
}
- priv->phydev = phydev;
priv->phy_interface = pd->phy_interface;
return 0;
@@ -590,5 +571,4 @@ void bcmgenet_mii_exit(struct net_device *dev)
of_phy_deregister_fixed_link(dn);
of_node_put(priv->phy_dn);
platform_device_unregister(priv->mii_pdev);
- platform_device_put(priv->mii_pdev);
}
OpenPOWER on IntegriCloud