diff options
Diffstat (limited to 'drivers/net/dsa/bcm_sf2_cfp.c')
| -rw-r--r-- | drivers/net/dsa/bcm_sf2_cfp.c | 1130 |
1 files changed, 887 insertions, 243 deletions
diff --git a/drivers/net/dsa/bcm_sf2_cfp.c b/drivers/net/dsa/bcm_sf2_cfp.c index 8a1da7e67707..b721a2009b50 100644 --- a/drivers/net/dsa/bcm_sf2_cfp.c +++ b/drivers/net/dsa/bcm_sf2_cfp.c @@ -20,37 +20,102 @@ #include "bcm_sf2.h" #include "bcm_sf2_regs.h" -struct cfp_udf_layout { - u8 slices[UDF_NUM_SLICES]; +struct cfp_udf_slice_layout { + u8 slices[UDFS_PER_SLICE]; u32 mask_value; + u32 base_offset; +}; +struct cfp_udf_layout { + struct cfp_udf_slice_layout udfs[UDF_NUM_SLICES]; }; +static const u8 zero_slice[UDFS_PER_SLICE] = { }; + /* UDF slices layout for a TCPv4/UDPv4 specification */ static const struct cfp_udf_layout udf_tcpip4_layout = { - .slices = { - /* End of L2, byte offset 12, src IP[0:15] */ - CFG_UDF_EOL2 | 6, - /* End of L2, byte offset 14, src IP[16:31] */ - CFG_UDF_EOL2 | 7, - /* End of L2, byte offset 16, dst IP[0:15] */ - CFG_UDF_EOL2 | 8, - /* End of L2, byte offset 18, dst IP[16:31] */ - CFG_UDF_EOL2 | 9, - /* End of L3, byte offset 0, src port */ - CFG_UDF_EOL3 | 0, - /* End of L3, byte offset 2, dst port */ - CFG_UDF_EOL3 | 1, - 0, 0, 0 + .udfs = { + [1] = { + .slices = { + /* End of L2, byte offset 12, src IP[0:15] */ + CFG_UDF_EOL2 | 6, + /* End of L2, byte offset 14, src IP[16:31] */ + CFG_UDF_EOL2 | 7, + /* End of L2, byte offset 16, dst IP[0:15] */ + CFG_UDF_EOL2 | 8, + /* End of L2, byte offset 18, dst IP[16:31] */ + CFG_UDF_EOL2 | 9, + /* End of L3, byte offset 0, src port */ + CFG_UDF_EOL3 | 0, + /* End of L3, byte offset 2, dst port */ + CFG_UDF_EOL3 | 1, + 0, 0, 0 + }, + .mask_value = L3_FRAMING_MASK | IPPROTO_MASK | IP_FRAG, + .base_offset = CORE_UDF_0_A_0_8_PORT_0 + UDF_SLICE_OFFSET, + }, + }, +}; + +/* UDF slices layout for a TCPv6/UDPv6 specification */ +static const struct cfp_udf_layout udf_tcpip6_layout = { + .udfs = { + [0] = { + .slices = { + /* End of L2, byte offset 8, src IP[0:15] */ + CFG_UDF_EOL2 | 4, + /* End of L2, byte offset 10, src IP[16:31] */ + CFG_UDF_EOL2 | 5, + /* End of L2, byte offset 12, src IP[32:47] */ + CFG_UDF_EOL2 | 6, + /* End of L2, byte offset 14, src IP[48:63] */ + CFG_UDF_EOL2 | 7, + /* End of L2, byte offset 16, src IP[64:79] */ + CFG_UDF_EOL2 | 8, + /* End of L2, byte offset 18, src IP[80:95] */ + CFG_UDF_EOL2 | 9, + /* End of L2, byte offset 20, src IP[96:111] */ + CFG_UDF_EOL2 | 10, + /* End of L2, byte offset 22, src IP[112:127] */ + CFG_UDF_EOL2 | 11, + /* End of L3, byte offset 0, src port */ + CFG_UDF_EOL3 | 0, + }, + .mask_value = L3_FRAMING_MASK | IPPROTO_MASK | IP_FRAG, + .base_offset = CORE_UDF_0_B_0_8_PORT_0, + }, + [3] = { + .slices = { + /* End of L2, byte offset 24, dst IP[0:15] */ + CFG_UDF_EOL2 | 12, + /* End of L2, byte offset 26, dst IP[16:31] */ + CFG_UDF_EOL2 | 13, + /* End of L2, byte offset 28, dst IP[32:47] */ + CFG_UDF_EOL2 | 14, + /* End of L2, byte offset 30, dst IP[48:63] */ + CFG_UDF_EOL2 | 15, + /* End of L2, byte offset 32, dst IP[64:79] */ + CFG_UDF_EOL2 | 16, + /* End of L2, byte offset 34, dst IP[80:95] */ + CFG_UDF_EOL2 | 17, + /* End of L2, byte offset 36, dst IP[96:111] */ + CFG_UDF_EOL2 | 18, + /* End of L2, byte offset 38, dst IP[112:127] */ + CFG_UDF_EOL2 | 19, + /* End of L3, byte offset 2, dst port */ + CFG_UDF_EOL3 | 1, + }, + .mask_value = L3_FRAMING_MASK | IPPROTO_MASK | IP_FRAG, + .base_offset = CORE_UDF_0_D_0_11_PORT_0, + }, }, - .mask_value = L3_FRAMING_MASK | IPPROTO_MASK | IP_FRAG, }; static inline unsigned int bcm_sf2_get_num_udf_slices(const u8 *layout) { unsigned int i, count = 0; - for (i = 0; i < UDF_NUM_SLICES; i++) { + for (i = 0; i < UDFS_PER_SLICE; i++) { if (layout[i] != 0) count++; } @@ -58,15 +123,42 @@ static inline unsigned int bcm_sf2_get_num_udf_slices(const u8 *layout) return count; } +static inline u32 udf_upper_bits(unsigned int num_udf) +{ + return GENMASK(num_udf - 1, 0) >> (UDFS_PER_SLICE - 1); +} + +static inline u32 udf_lower_bits(unsigned int num_udf) +{ + return (u8)GENMASK(num_udf - 1, 0); +} + +static unsigned int bcm_sf2_get_slice_number(const struct cfp_udf_layout *l, + unsigned int start) +{ + const struct cfp_udf_slice_layout *slice_layout; + unsigned int slice_idx; + + for (slice_idx = start; slice_idx < UDF_NUM_SLICES; slice_idx++) { + slice_layout = &l->udfs[slice_idx]; + if (memcmp(slice_layout->slices, zero_slice, + sizeof(zero_slice))) + break; + } + + return slice_idx; +} + static void bcm_sf2_cfp_udf_set(struct bcm_sf2_priv *priv, - unsigned int slice_num, - const u8 *layout) + const struct cfp_udf_layout *layout, + unsigned int slice_num) { - u32 offset = CORE_UDF_0_A_0_8_PORT_0 + slice_num * UDF_SLICE_OFFSET; + u32 offset = layout->udfs[slice_num].base_offset; unsigned int i; - for (i = 0; i < UDF_NUM_SLICES; i++) - core_writel(priv, layout[i], offset + i * 4); + for (i = 0; i < UDFS_PER_SLICE; i++) + core_writel(priv, layout->udfs[slice_num].slices[i], + offset + i * 4); } static int bcm_sf2_cfp_op(struct bcm_sf2_priv *priv, unsigned int op) @@ -112,69 +204,177 @@ static inline unsigned int bcm_sf2_cfp_rule_size(struct bcm_sf2_priv *priv) return priv->num_cfp_rules - 1; } -static int bcm_sf2_cfp_rule_set(struct dsa_switch *ds, int port, - struct ethtool_rx_flow_spec *fs) +static int bcm_sf2_cfp_act_pol_set(struct bcm_sf2_priv *priv, + unsigned int rule_index, + unsigned int port_num, + unsigned int queue_num, + bool fwd_map_change) { - struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); - struct ethtool_tcpip4_spec *v4_spec; - const struct cfp_udf_layout *layout; - unsigned int slice_num, rule_index; - unsigned int queue_num, port_num; - u8 ip_proto, ip_frag; - u8 num_udf; - u32 reg; int ret; + u32 reg; - /* Check for unsupported extensions */ - if ((fs->flow_type & FLOW_EXT) && - (fs->m_ext.vlan_etype || fs->m_ext.data[1])) - return -EINVAL; + /* Replace ARL derived destination with DST_MAP derived, define + * which port and queue this should be forwarded to. + */ + if (fwd_map_change) + reg = CHANGE_FWRD_MAP_IB_REP_ARL | + BIT(port_num + DST_MAP_IB_SHIFT) | + CHANGE_TC | queue_num << NEW_TC_SHIFT; + else + reg = 0; - if (fs->location != RX_CLS_LOC_ANY && - test_bit(fs->location, priv->cfp.used)) - return -EBUSY; + core_writel(priv, reg, CORE_ACT_POL_DATA0); - if (fs->location != RX_CLS_LOC_ANY && - fs->location > bcm_sf2_cfp_rule_size(priv)) - return -EINVAL; + /* Set classification ID that needs to be put in Broadcom tag */ + core_writel(priv, rule_index << CHAIN_ID_SHIFT, CORE_ACT_POL_DATA1); - ip_frag = be32_to_cpu(fs->m_ext.data[0]); + core_writel(priv, 0, CORE_ACT_POL_DATA2); - /* We do not support discarding packets, check that the - * destination port is enabled and that we are within the - * number of ports supported by the switch + /* Configure policer RAM now */ + ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | ACT_POL_RAM); + if (ret) { + pr_err("Policer entry at %d failed\n", rule_index); + return ret; + } + + /* Disable the policer */ + core_writel(priv, POLICER_MODE_DISABLE, CORE_RATE_METER0); + + /* Now the rate meter */ + ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | RATE_METER_RAM); + if (ret) { + pr_err("Meter entry at %d failed\n", rule_index); + return ret; + } + + return 0; +} + +static void bcm_sf2_cfp_slice_ipv4(struct bcm_sf2_priv *priv, + struct ethtool_tcpip4_spec *v4_spec, + unsigned int slice_num, + bool mask) +{ + u32 reg, offset; + + /* C-Tag [31:24] + * UDF_n_A8 [23:8] + * UDF_n_A7 [7:0] */ - port_num = fs->ring_cookie / 8; + reg = 0; + if (mask) + offset = CORE_CFP_MASK_PORT(4); + else + offset = CORE_CFP_DATA_PORT(4); + core_writel(priv, reg, offset); - if (fs->ring_cookie == RX_CLS_FLOW_DISC || - !(BIT(port_num) & ds->enabled_port_mask) || - port_num >= priv->hw_params.num_ports) - return -EINVAL; + /* UDF_n_A7 [31:24] + * UDF_n_A6 [23:8] + * UDF_n_A5 [7:0] + */ + reg = be16_to_cpu(v4_spec->pdst) >> 8; + if (mask) + offset = CORE_CFP_MASK_PORT(3); + else + offset = CORE_CFP_DATA_PORT(3); + core_writel(priv, reg, offset); + + /* UDF_n_A5 [31:24] + * UDF_n_A4 [23:8] + * UDF_n_A3 [7:0] + */ + reg = (be16_to_cpu(v4_spec->pdst) & 0xff) << 24 | + (u32)be16_to_cpu(v4_spec->psrc) << 8 | + (be32_to_cpu(v4_spec->ip4dst) & 0x0000ff00) >> 8; + if (mask) + offset = CORE_CFP_MASK_PORT(2); + else + offset = CORE_CFP_DATA_PORT(2); + core_writel(priv, reg, offset); + + /* UDF_n_A3 [31:24] + * UDF_n_A2 [23:8] + * UDF_n_A1 [7:0] + */ + reg = (u32)(be32_to_cpu(v4_spec->ip4dst) & 0xff) << 24 | + (u32)(be32_to_cpu(v4_spec->ip4dst) >> 16) << 8 | + (be32_to_cpu(v4_spec->ip4src) & 0x0000ff00) >> 8; + if (mask) + offset = CORE_CFP_MASK_PORT(1); + else + offset = CORE_CFP_DATA_PORT(1); + core_writel(priv, reg, offset); + + /* UDF_n_A1 [31:24] + * UDF_n_A0 [23:8] + * Reserved [7:4] + * Slice ID [3:2] + * Slice valid [1:0] + */ + reg = (u32)(be32_to_cpu(v4_spec->ip4src) & 0xff) << 24 | + (u32)(be32_to_cpu(v4_spec->ip4src) >> 16) << 8 | + SLICE_NUM(slice_num) | SLICE_VALID; + if (mask) + offset = CORE_CFP_MASK_PORT(0); + else + offset = CORE_CFP_DATA_PORT(0); + core_writel(priv, reg, offset); +} + +static int bcm_sf2_cfp_ipv4_rule_set(struct bcm_sf2_priv *priv, int port, + unsigned int port_num, + unsigned int queue_num, + struct ethtool_rx_flow_spec *fs) +{ + struct ethtool_tcpip4_spec *v4_spec, *v4_m_spec; + const struct cfp_udf_layout *layout; + unsigned int slice_num, rule_index; + u8 ip_proto, ip_frag; + u8 num_udf; + u32 reg; + int ret; switch (fs->flow_type & ~FLOW_EXT) { case TCP_V4_FLOW: ip_proto = IPPROTO_TCP; v4_spec = &fs->h_u.tcp_ip4_spec; + v4_m_spec = &fs->m_u.tcp_ip4_spec; break; case UDP_V4_FLOW: ip_proto = IPPROTO_UDP; v4_spec = &fs->h_u.udp_ip4_spec; + v4_m_spec = &fs->m_u.udp_ip4_spec; break; default: return -EINVAL; } - /* We only use one UDF slice for now */ - slice_num = 1; + ip_frag = be32_to_cpu(fs->m_ext.data[0]); + + /* Locate the first rule available */ + if (fs->location == RX_CLS_LOC_ANY) + rule_index = find_first_zero_bit(priv->cfp.used, + bcm_sf2_cfp_rule_size(priv)); + else + rule_index = fs->location; + layout = &udf_tcpip4_layout; - num_udf = bcm_sf2_get_num_udf_slices(layout->slices); + /* We only use one UDF slice for now */ + slice_num = bcm_sf2_get_slice_number(layout, 0); + if (slice_num == UDF_NUM_SLICES) + return -EINVAL; + + num_udf = bcm_sf2_get_num_udf_slices(layout->udfs[slice_num].slices); /* Apply the UDF layout for this filter */ - bcm_sf2_cfp_udf_set(priv, slice_num, layout->slices); + bcm_sf2_cfp_udf_set(priv, layout, slice_num); /* Apply to all packets received through this port */ core_writel(priv, BIT(port), CORE_CFP_DATA_PORT(7)); + /* Source port map match */ + core_writel(priv, 0xff, CORE_CFP_MASK_PORT(7)); + /* S-Tag status [31:30] * C-Tag status [29:28] * L2 framing [27:26] @@ -189,143 +389,398 @@ static int bcm_sf2_cfp_rule_set(struct dsa_switch *ds, int port, * Reserved [1] * UDF_Valid[8] [0] */ - core_writel(priv, v4_spec->tos << 16 | ip_proto << 8 | ip_frag << 7, + core_writel(priv, v4_spec->tos << IPTOS_SHIFT | + ip_proto << IPPROTO_SHIFT | ip_frag << IP_FRAG_SHIFT | + udf_upper_bits(num_udf), CORE_CFP_DATA_PORT(6)); + /* Mask with the specific layout for IPv4 packets */ + core_writel(priv, layout->udfs[slice_num].mask_value | + udf_upper_bits(num_udf), CORE_CFP_MASK_PORT(6)); + /* UDF_Valid[7:0] [31:24] * S-Tag [23:8] * C-Tag [7:0] */ - core_writel(priv, GENMASK(num_udf - 1, 0) << 24, CORE_CFP_DATA_PORT(5)); + core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_DATA_PORT(5)); + + /* Mask all but valid UDFs */ + core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_MASK_PORT(5)); + + /* Program the match and the mask */ + bcm_sf2_cfp_slice_ipv4(priv, v4_spec, slice_num, false); + bcm_sf2_cfp_slice_ipv4(priv, v4_m_spec, SLICE_NUM_MASK, true); + + /* Insert into TCAM now */ + bcm_sf2_cfp_rule_addr_set(priv, rule_index); + + ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL); + if (ret) { + pr_err("TCAM entry at addr %d failed\n", rule_index); + return ret; + } + + /* Insert into Action and policer RAMs now */ + ret = bcm_sf2_cfp_act_pol_set(priv, rule_index, port_num, + queue_num, true); + if (ret) + return ret; + + /* Turn on CFP for this rule now */ + reg = core_readl(priv, CORE_CFP_CTL_REG); + reg |= BIT(port); + core_writel(priv, reg, CORE_CFP_CTL_REG); + + /* Flag the rule as being used and return it */ + set_bit(rule_index, priv->cfp.used); + set_bit(rule_index, priv->cfp.unique); + fs->location = rule_index; + + return 0; +} + +static void bcm_sf2_cfp_slice_ipv6(struct bcm_sf2_priv *priv, + const __be32 *ip6_addr, const __be16 port, + unsigned int slice_num, + bool mask) +{ + u32 reg, tmp, val, offset; /* C-Tag [31:24] - * UDF_n_A8 [23:8] - * UDF_n_A7 [7:0] + * UDF_n_B8 [23:8] (port) + * UDF_n_B7 (upper) [7:0] (addr[15:8]) */ - core_writel(priv, 0, CORE_CFP_DATA_PORT(4)); + reg = be32_to_cpu(ip6_addr[3]); + val = (u32)be16_to_cpu(port) << 8 | ((reg >> 8) & 0xff); + if (mask) + offset = CORE_CFP_MASK_PORT(4); + else + offset = CORE_CFP_DATA_PORT(4); + core_writel(priv, val, offset); - /* UDF_n_A7 [31:24] - * UDF_n_A6 [23:8] - * UDF_n_A5 [7:0] + /* UDF_n_B7 (lower) [31:24] (addr[7:0]) + * UDF_n_B6 [23:8] (addr[31:16]) + * UDF_n_B5 (upper) [7:0] (addr[47:40]) */ - core_writel(priv, be16_to_cpu(v4_spec->pdst) >> 8, - CORE_CFP_DATA_PORT(3)); + tmp = be32_to_cpu(ip6_addr[2]); + val = (u32)(reg & 0xff) << 24 | (u32)(reg >> 16) << 8 | + ((tmp >> 8) & 0xff); + if (mask) + offset = CORE_CFP_MASK_PORT(3); + else + offset = CORE_CFP_DATA_PORT(3); + core_writel(priv, val, offset); - /* UDF_n_A5 [31:24] - * UDF_n_A4 [23:8] - * UDF_n_A3 [7:0] + /* UDF_n_B5 (lower) [31:24] (addr[39:32]) + * UDF_n_B4 [23:8] (addr[63:48]) + * UDF_n_B3 (upper) [7:0] (addr[79:72]) */ - reg = (be16_to_cpu(v4_spec->pdst) & 0xff) << 24 | - (u32)be16_to_cpu(v4_spec->psrc) << 8 | - (be32_to_cpu(v4_spec->ip4dst) & 0x0000ff00) >> 8; - core_writel(priv, reg, CORE_CFP_DATA_PORT(2)); + reg = be32_to_cpu(ip6_addr[1]); + val = (u32)(tmp & 0xff) << 24 | (u32)(tmp >> 16) << 8 | + ((reg >> 8) & 0xff); + if (mask) + offset = CORE_CFP_MASK_PORT(2); + else + offset = CORE_CFP_DATA_PORT(2); + core_writel(priv, val, offset); - /* UDF_n_A3 [31:24] - * UDF_n_A2 [23:8] - * UDF_n_A1 [7:0] + /* UDF_n_B3 (lower) [31:24] (addr[71:64]) + * UDF_n_B2 [23:8] (addr[95:80]) + * UDF_n_B1 (upper) [7:0] (addr[111:104]) */ - reg = (u32)(be32_to_cpu(v4_spec->ip4dst) & 0xff) << 24 | - (u32)(be32_to_cpu(v4_spec->ip4dst) >> 16) << 8 | - (be32_to_cpu(v4_spec->ip4src) & 0x0000ff00) >> 8; - core_writel(priv, reg, CORE_CFP_DATA_PORT(1)); + tmp = be32_to_cpu(ip6_addr[0]); + val = (u32)(reg & 0xff) << 24 | (u32)(reg >> 16) << 8 | + ((tmp >> 8) & 0xff); + if (mask) + offset = CORE_CFP_MASK_PORT(1); + else + offset = CORE_CFP_DATA_PORT(1); + core_writel(priv, val, offset); - /* UDF_n_A1 [31:24] - * UDF_n_A0 [23:8] + /* UDF_n_B1 (lower) [31:24] (addr[103:96]) + * UDF_n_B0 [23:8] (addr[127:112]) * Reserved [7:4] * Slice ID [3:2] * Slice valid [1:0] */ - reg = (u32)(be32_to_cpu(v4_spec->ip4src) & 0xff) << 24 | - (u32)(be32_to_cpu(v4_spec->ip4src) >> 16) << 8 | - SLICE_NUM(slice_num) | SLICE_VALID; - core_writel(priv, reg, CORE_CFP_DATA_PORT(0)); + reg = (u32)(tmp & 0xff) << 24 | (u32)(tmp >> 16) << 8 | + SLICE_NUM(slice_num) | SLICE_VALID; + if (mask) + offset = CORE_CFP_MASK_PORT(0); + else + offset = CORE_CFP_DATA_PORT(0); + core_writel(priv, reg, offset); +} - /* Source port map match */ - core_writel(priv, 0xff, CORE_CFP_MASK_PORT(7)); +static int bcm_sf2_cfp_ipv6_rule_set(struct bcm_sf2_priv *priv, int port, + unsigned int port_num, + unsigned int queue_num, + struct ethtool_rx_flow_spec *fs) +{ + struct ethtool_tcpip6_spec *v6_spec, *v6_m_spec; + unsigned int slice_num, rule_index[2]; + const struct cfp_udf_layout *layout; + u8 ip_proto, ip_frag; + int ret = 0; + u8 num_udf; + u32 reg; - /* Mask with the specific layout for IPv4 packets */ - core_writel(priv, layout->mask_value, CORE_CFP_MASK_PORT(6)); + switch (fs->flow_type & ~FLOW_EXT) { + case TCP_V6_FLOW: + ip_proto = IPPROTO_TCP; + v6_spec = &fs->h_u.tcp_ip6_spec; + v6_m_spec = &fs->m_u.tcp_ip6_spec; + break; + case UDP_V6_FLOW: + ip_proto = IPPROTO_UDP; + v6_spec = &fs->h_u.udp_ip6_spec; + v6_m_spec = &fs->m_u.udp_ip6_spec; + break; + default: + return -EINVAL; + } - /* Mask all but valid UDFs */ - core_writel(priv, GENMASK(num_udf - 1, 0) << 24, CORE_CFP_MASK_PORT(5)); + ip_frag = be32_to_cpu(fs->m_ext.data[0]); - /* Mask all */ - core_writel(priv, 0, CORE_CFP_MASK_PORT(4)); + layout = &udf_tcpip6_layout; + slice_num = bcm_sf2_get_slice_number(layout, 0); + if (slice_num == UDF_NUM_SLICES) + return -EINVAL; - /* All other UDFs should be matched with the filter */ - core_writel(priv, 0xff, CORE_CFP_MASK_PORT(3)); - core_writel(priv, 0xffffffff, CORE_CFP_MASK_PORT(2)); - core_writel(priv, 0xffffffff, CORE_CFP_MASK_PORT(1)); - core_writel(priv, 0xffffff0f, CORE_CFP_MASK_PORT(0)); + num_udf = bcm_sf2_get_num_udf_slices(layout->udfs[slice_num].slices); - /* Locate the first rule available */ + /* Negotiate two indexes, one for the second half which we are chained + * from, which is what we will return to user-space, and a second one + * which is used to store its first half. That first half does not + * allow any choice of placement, so it just needs to find the next + * available bit. We return the second half as fs->location because + * that helps with the rule lookup later on since the second half is + * chained from its first half, we can easily identify IPv6 CFP rules + * by looking whether they carry a CHAIN_ID. + * + * We also want the second half to have a lower rule_index than its + * first half because the HW search is by incrementing addresses. + */ if (fs->location == RX_CLS_LOC_ANY) - rule_index = find_first_zero_bit(priv->cfp.used, - bcm_sf2_cfp_rule_size(priv)); + rule_index[0] = find_first_zero_bit(priv->cfp.used, + bcm_sf2_cfp_rule_size(priv)); else - rule_index = fs->location; + rule_index[0] = fs->location; - /* Insert into TCAM now */ - bcm_sf2_cfp_rule_addr_set(priv, rule_index); + /* Flag it as used (cleared on error path) such that we can immediately + * obtain a second one to chain from. + */ + set_bit(rule_index[0], priv->cfp.used); - ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL); - if (ret) { - pr_err("TCAM entry at addr %d failed\n", rule_index); - return ret; + rule_index[1] = find_first_zero_bit(priv->cfp.used, + bcm_sf2_cfp_rule_size(priv)); + if (rule_index[1] > bcm_sf2_cfp_rule_size(priv)) { + ret = -ENOSPC; + goto out_err; } - /* Replace ARL derived destination with DST_MAP derived, define - * which port and queue this should be forwarded to. - * - * We have a small oddity where Port 6 just does not have a - * valid bit here (so we subtract by one). + /* Apply the UDF layout for this filter */ + bcm_sf2_cfp_udf_set(priv, layout, slice_num); + + /* Apply to all packets received through this port */ + core_writel(priv, BIT(port), CORE_CFP_DATA_PORT(7)); + + /* Source port map match */ + core_writel(priv, 0xff, CORE_CFP_MASK_PORT(7)); + + /* S-Tag status [31:30] + * C-Tag status [29:28] + * L2 framing [27:26] + * L3 framing [25:24] + * IP ToS [23:16] + * IP proto [15:08] + * IP Fragm [7] + * Non 1st frag [6] + * IP Authen [5] + * TTL range [4:3] + * PPPoE session [2] + * Reserved [1] + * UDF_Valid[8] [0] */ - queue_num = fs->ring_cookie % 8; - if (port_num >= 7) - port_num -= 1; + reg = 1 << L3_FRAMING_SHIFT | ip_proto << IPPROTO_SHIFT | + ip_frag << IP_FRAG_SHIFT | udf_upper_bits(num_udf); + core_writel(priv, reg, CORE_CFP_DATA_PORT(6)); - reg = CHANGE_FWRD_MAP_IB_REP_ARL | BIT(port_num + DST_MAP_IB_SHIFT) | - CHANGE_TC | queue_num << NEW_TC_SHIFT; + /* Mask with the specific layout for IPv6 packets including + * UDF_Valid[8] + */ + reg = layout->udfs[slice_num].mask_value | udf_upper_bits(num_udf); + core_writel(priv, reg, CORE_CFP_MASK_PORT(6)); - core_writel(priv, reg, CORE_ACT_POL_DATA0); + /* UDF_Valid[7:0] [31:24] + * S-Tag [23:8] + * C-Tag [7:0] + */ + core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_DATA_PORT(5)); - /* Set classification ID that needs to be put in Broadcom tag */ - core_writel(priv, rule_index << CHAIN_ID_SHIFT, - CORE_ACT_POL_DATA1); + /* Mask all but valid UDFs */ + core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_MASK_PORT(5)); - core_writel(priv, 0, CORE_ACT_POL_DATA2); + /* Slice the IPv6 source address and port */ + bcm_sf2_cfp_slice_ipv6(priv, v6_spec->ip6src, v6_spec->psrc, + slice_num, false); + bcm_sf2_cfp_slice_ipv6(priv, v6_m_spec->ip6src, v6_m_spec->psrc, + slice_num, true); - /* Configure policer RAM now */ - ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | ACT_POL_RAM); + /* Insert into TCAM now because we need to insert a second rule */ + bcm_sf2_cfp_rule_addr_set(priv, rule_index[0]); + + ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL); if (ret) { - pr_err("Policer entry at %d failed\n", rule_index); - return ret; + pr_err("TCAM entry at addr %d failed\n", rule_index[0]); + goto out_err; } - /* Disable the policer */ - core_writel(priv, POLICER_MODE_DISABLE, CORE_RATE_METER0); + /* Insert into Action and policer RAMs now */ + ret = bcm_sf2_cfp_act_pol_set(priv, rule_index[0], port_num, + queue_num, false); + if (ret) + goto out_err; - /* Now the rate meter */ - ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | RATE_METER_RAM); + /* Now deal with the second slice to chain this rule */ + slice_num = bcm_sf2_get_slice_number(layout, slice_num + 1); + if (slice_num == UDF_NUM_SLICES) { + ret = -EINVAL; + goto out_err; + } + + num_udf = bcm_sf2_get_num_udf_slices(layout->udfs[slice_num].slices); + + /* Apply the UDF layout for this filter */ + bcm_sf2_cfp_udf_set(priv, layout, slice_num); + + /* Chained rule, source port match is coming from the rule we are + * chained from. + */ + core_writel(priv, 0, CORE_CFP_DATA_PORT(7)); + core_writel(priv, 0, CORE_CFP_MASK_PORT(7)); + + /* + * CHAIN ID [31:24] chain to previous slice + * Reserved [23:20] + * UDF_Valid[11:8] [19:16] + * UDF_Valid[7:0] [15:8] + * UDF_n_D11 [7:0] + */ + reg = rule_index[0] << 24 | udf_upper_bits(num_udf) << 16 | + udf_lower_bits(num_udf) << 8; + core_writel(priv, reg, CORE_CFP_DATA_PORT(6)); + + /* Mask all except chain ID, UDF Valid[8] and UDF Valid[7:0] */ + reg = XCESS_ADDR_MASK << 24 | udf_upper_bits(num_udf) << 16 | + udf_lower_bits(num_udf) << 8; + core_writel(priv, reg, CORE_CFP_MASK_PORT(6)); + + /* Don't care */ + core_writel(priv, 0, CORE_CFP_DATA_PORT(5)); + + /* Mask all */ + core_writel(priv, 0, CORE_CFP_MASK_PORT(5)); + + bcm_sf2_cfp_slice_ipv6(priv, v6_spec->ip6dst, v6_spec->pdst, slice_num, + false); + bcm_sf2_cfp_slice_ipv6(priv, v6_m_spec->ip6dst, v6_m_spec->pdst, + SLICE_NUM_MASK, true); + + /* Insert into TCAM now */ + bcm_sf2_cfp_rule_addr_set(priv, rule_index[1]); + + ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL); if (ret) { - pr_err("Meter entry at %d failed\n", rule_index); - return ret; + pr_err("TCAM entry at addr %d failed\n", rule_index[1]); + goto out_err; } + /* Insert into Action and policer RAMs now, set chain ID to + * the one we are chained to + */ + ret = bcm_sf2_cfp_act_pol_set(priv, rule_index[0], port_num, + queue_num, true); + if (ret) + goto out_err; + /* Turn on CFP for this rule now */ reg = core_readl(priv, CORE_CFP_CTL_REG); reg |= BIT(port); core_writel(priv, reg, CORE_CFP_CTL_REG); - /* Flag the rule as being used and return it */ - set_bit(rule_index, priv->cfp.used); - fs->location = rule_index; + /* Flag the second half rule as being used now, return it as the + * location, and flag it as unique while dumping rules + */ + set_bit(rule_index[1], priv->cfp.used); + set_bit(rule_index[1], priv->cfp.unique); + fs->location = rule_index[1]; - return 0; + return ret; + +out_err: + clear_bit(rule_index[0], priv->cfp.used); + return ret; } -static int bcm_sf2_cfp_rule_del(struct bcm_sf2_priv *priv, int port, - u32 loc) +static int bcm_sf2_cfp_rule_set(struct dsa_switch *ds, int port, + struct ethtool_rx_flow_spec *fs) +{ + struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); + unsigned int queue_num, port_num; + int ret = -EINVAL; + + /* Check for unsupported extensions */ + if ((fs->flow_type & FLOW_EXT) && (fs->m_ext.vlan_etype || + fs->m_ext.data[1])) + return -EINVAL; + + if (fs->location != RX_CLS_LOC_ANY && + test_bit(fs->location, priv->cfp.used)) + return -EBUSY; + + if (fs->location != RX_CLS_LOC_ANY && + fs->location > bcm_sf2_cfp_rule_size(priv)) + return -EINVAL; + + /* We do not support discarding packets, check that the + * destination port is enabled and that we are within the + * number of ports supported by the switch + */ + port_num = fs->ring_cookie / SF2_NUM_EGRESS_QUEUES; + + if (fs->ring_cookie == RX_CLS_FLOW_DISC || + !dsa_is_user_port(ds, port_num) || + port_num >= priv->hw_params.num_ports) + return -EINVAL; + /* + * We have a small oddity where Port 6 just does not have a + * valid bit here (so we substract by one). + */ + queue_num = fs->ring_cookie % SF2_NUM_EGRESS_QUEUES; + if (port_num >= 7) + port_num -= 1; + + switch (fs->flow_type & ~FLOW_EXT) { + case TCP_V4_FLOW: + case UDP_V4_FLOW: + ret = bcm_sf2_cfp_ipv4_rule_set(priv, port, port_num, + queue_num, fs); + break; + case TCP_V6_FLOW: + case UDP_V6_FLOW: + ret = bcm_sf2_cfp_ipv6_rule_set(priv, port, port_num, + queue_num, fs); + break; + default: + break; + } + + return ret; +} + +static int bcm_sf2_cfp_rule_del_one(struct bcm_sf2_priv *priv, int port, + u32 loc, u32 *next_loc) { int ret; u32 reg; @@ -341,6 +796,14 @@ static int bcm_sf2_cfp_rule_del(struct bcm_sf2_priv *priv, int port, if (ret) return ret; + /* Check if this is possibly an IPv6 rule that would + * indicate we need to delete its companion rule + * as well + */ + reg = core_readl(priv, CORE_CFP_DATA_PORT(6)); + if (next_loc) + *next_loc = (reg >> 24) & CHAIN_ID_MASK; + /* Clear its valid bits */ reg = core_readl(priv, CORE_CFP_DATA_PORT(0)); reg &= ~SLICE_VALID; @@ -352,10 +815,28 @@ static int bcm_sf2_cfp_rule_del(struct bcm_sf2_priv *priv, int port, return ret; clear_bit(loc, priv->cfp.used); + clear_bit(loc, priv->cfp.unique); return 0; } +static int bcm_sf2_cfp_rule_del(struct bcm_sf2_priv *priv, int port, + u32 loc) +{ + u32 next_loc = 0; + int ret; + + ret = bcm_sf2_cfp_rule_del_one(priv, port, loc, &next_loc); + if (ret) + return ret; + + /* If this was an IPv6 rule, delete is companion rule too */ + if (next_loc) + ret = bcm_sf2_cfp_rule_del_one(priv, port, next_loc, NULL); + + return ret; +} + static void bcm_sf2_invert_masks(struct ethtool_rx_flow_spec *flow) { unsigned int i; @@ -369,93 +850,63 @@ static void bcm_sf2_invert_masks(struct ethtool_rx_flow_spec *flow) flow->m_ext.data[1] ^= cpu_to_be32(~0); } -static int bcm_sf2_cfp_rule_get(struct bcm_sf2_priv *priv, int port, - struct ethtool_rxnfc *nfc, bool search) +static int bcm_sf2_cfp_unslice_ipv4(struct bcm_sf2_priv *priv, + struct ethtool_tcpip4_spec *v4_spec, + bool mask) { - struct ethtool_tcpip4_spec *v4_spec; - unsigned int queue_num; + u32 reg, offset, ipv4; u16 src_dst_port; - u32 reg, ipv4; - int ret; - - if (!search) { - bcm_sf2_cfp_rule_addr_set(priv, nfc->fs.location); - - ret = bcm_sf2_cfp_op(priv, OP_SEL_READ | ACT_POL_RAM); - if (ret) - return ret; - - reg = core_readl(priv, CORE_ACT_POL_DATA0); - ret = bcm_sf2_cfp_op(priv, OP_SEL_READ | TCAM_SEL); - if (ret) - return ret; - } else { - reg = core_readl(priv, CORE_ACT_POL_DATA0); - } - - /* Extract the destination port */ - nfc->fs.ring_cookie = fls((reg >> DST_MAP_IB_SHIFT) & - DST_MAP_IB_MASK) - 1; - - /* There is no Port 6, so we compensate for that here */ - if (nfc->fs.ring_cookie >= 6) - nfc->fs.ring_cookie++; - nfc->fs.ring_cookie *= 8; - - /* Extract the destination queue */ - queue_num = (reg >> NEW_TC_SHIFT) & NEW_TC_MASK; - nfc->fs.ring_cookie += queue_num; - - /* Extract the IP protocol */ - reg = core_readl(priv, CORE_CFP_DATA_PORT(6)); - switch ((reg & IPPROTO_MASK) >> IPPROTO_SHIFT) { - case IPPROTO_TCP: - nfc->fs.flow_type = TCP_V4_FLOW; - v4_spec = &nfc->fs.h_u.tcp_ip4_spec; - break; - case IPPROTO_UDP: - nfc->fs.flow_type = UDP_V4_FLOW; - v4_spec = &nfc->fs.h_u.udp_ip4_spec; - break; - default: - /* Clear to exit the search process */ - if (search) - core_readl(priv, CORE_CFP_DATA_PORT(7)); - return -EINVAL; - } - - v4_spec->tos = (reg >> 16) & IPPROTO_MASK; - nfc->fs.m_ext.data[0] = cpu_to_be32((reg >> 7) & 1); + if (mask) + offset = CORE_CFP_MASK_PORT(3); + else + offset = CORE_CFP_DATA_PORT(3); - reg = core_readl(priv, CORE_CFP_DATA_PORT(3)); + reg = core_readl(priv, offset); /* src port [15:8] */ src_dst_port = reg << 8; - reg = core_readl(priv, CORE_CFP_DATA_PORT(2)); + if (mask) + offset = CORE_CFP_MASK_PORT(2); + else + offset = CORE_CFP_DATA_PORT(2); + + reg = core_readl(priv, offset); /* src port [7:0] */ src_dst_port |= (reg >> 24); v4_spec->pdst = cpu_to_be16(src_dst_port); - nfc->fs.m_u.tcp_ip4_spec.pdst = cpu_to_be16(~0); v4_spec->psrc = cpu_to_be16((u16)(reg >> 8)); - nfc->fs.m_u.tcp_ip4_spec.psrc = cpu_to_be16(~0); /* IPv4 dst [15:8] */ ipv4 = (reg & 0xff) << 8; - reg = core_readl(priv, CORE_CFP_DATA_PORT(1)); + + if (mask) + offset = CORE_CFP_MASK_PORT(1); + else + offset = CORE_CFP_DATA_PORT(1); + + reg = core_readl(priv, offset); /* IPv4 dst [31:16] */ ipv4 |= ((reg >> 8) & 0xffff) << 16; /* IPv4 dst [7:0] */ ipv4 |= (reg >> 24) & 0xff; v4_spec->ip4dst = cpu_to_be32(ipv4); - nfc->fs.m_u.tcp_ip4_spec.ip4dst = cpu_to_be32(~0); /* IPv4 src [15:8] */ ipv4 = (reg & 0xff) << 8; - reg = core_readl(priv, CORE_CFP_DATA_PORT(0)); - if (!(reg & SLICE_VALID)) + if (mask) + offset = CORE_CFP_MASK_PORT(0); + else + offset = CORE_CFP_DATA_PORT(0); + reg = core_readl(priv, offset); + + /* Once the TCAM is programmed, the mask reflects the slice number + * being matched, don't bother checking it when reading back the + * mask spec + */ + if (!mask && !(reg & SLICE_VALID)) return -EINVAL; /* IPv4 src [7:0] */ @@ -463,7 +914,233 @@ static int bcm_sf2_cfp_rule_get(struct bcm_sf2_priv *priv, int port, /* IPv4 src [31:16] */ ipv4 |= ((reg >> 8) & 0xffff) << 16; v4_spec->ip4src = cpu_to_be32(ipv4); - nfc->fs.m_u.tcp_ip4_spec.ip4src = cpu_to_be32(~0); + + return 0; +} + +static int bcm_sf2_cfp_ipv4_rule_get(struct bcm_sf2_priv *priv, int port, + struct ethtool_rx_flow_spec *fs) +{ + struct ethtool_tcpip4_spec *v4_spec = NULL, *v4_m_spec = NULL; + u32 reg; + int ret; + + reg = core_readl(priv, CORE_CFP_DATA_PORT(6)); + + switch ((reg & IPPROTO_MASK) >> IPPROTO_SHIFT) { + case IPPROTO_TCP: + fs->flow_type = TCP_V4_FLOW; + v4_spec = &fs->h_u.tcp_ip4_spec; + v4_m_spec = &fs->m_u.tcp_ip4_spec; + break; + case IPPROTO_UDP: + fs->flow_type = UDP_V4_FLOW; + v4_spec = &fs->h_u.udp_ip4_spec; + v4_m_spec = &fs->m_u.udp_ip4_spec; + break; + default: + return -EINVAL; + } + + fs->m_ext.data[0] = cpu_to_be32((reg >> IP_FRAG_SHIFT) & 1); + v4_spec->tos = (reg >> IPTOS_SHIFT) & IPTOS_MASK; + + ret = bcm_sf2_cfp_unslice_ipv4(priv, v4_spec, false); + if (ret) + return ret; + + return bcm_sf2_cfp_unslice_ipv4(priv, v4_m_spec, true); +} + +static int bcm_sf2_cfp_unslice_ipv6(struct bcm_sf2_priv *priv, + __be32 *ip6_addr, __be16 *port, + bool mask) +{ + u32 reg, tmp, offset; + + /* C-Tag [31:24] + * UDF_n_B8 [23:8] (port) + * UDF_n_B7 (upper) [7:0] (addr[15:8]) + */ + if (mask) + offset = CORE_CFP_MASK_PORT(4); + else + offset = CORE_CFP_DATA_PORT(4); + reg = core_readl(priv, offset); + *port = cpu_to_be32(reg) >> 8; + tmp = (u32)(reg & 0xff) << 8; + + /* UDF_n_B7 (lower) [31:24] (addr[7:0]) + * UDF_n_B6 [23:8] (addr[31:16]) + * UDF_n_B5 (upper) [7:0] (addr[47:40]) + */ + if (mask) + offset = CORE_CFP_MASK_PORT(3); + else + offset = CORE_CFP_DATA_PORT(3); + reg = core_readl(priv, offset); + tmp |= (reg >> 24) & 0xff; + tmp |= (u32)((reg >> 8) << 16); + ip6_addr[3] = cpu_to_be32(tmp); + tmp = (u32)(reg & 0xff) << 8; + + /* UDF_n_B5 (lower) [31:24] (addr[39:32]) + * UDF_n_B4 [23:8] (addr[63:48]) + * UDF_n_B3 (upper) [7:0] (addr[79:72]) + */ + if (mask) + offset = CORE_CFP_MASK_PORT(2); + else + offset = CORE_CFP_DATA_PORT(2); + reg = core_readl(priv, offset); + tmp |= (reg >> 24) & 0xff; + tmp |= (u32)((reg >> 8) << 16); + ip6_addr[2] = cpu_to_be32(tmp); + tmp = (u32)(reg & 0xff) << 8; + + /* UDF_n_B3 (lower) [31:24] (addr[71:64]) + * UDF_n_B2 [23:8] (addr[95:80]) + * UDF_n_B1 (upper) [7:0] (addr[111:104]) + */ + if (mask) + offset = CORE_CFP_MASK_PORT(1); + else + offset = CORE_CFP_DATA_PORT(1); + reg = core_readl(priv, offset); + tmp |= (reg >> 24) & 0xff; + tmp |= (u32)((reg >> 8) << 16); + ip6_addr[1] = cpu_to_be32(tmp); + tmp = (u32)(reg & 0xff) << 8; + + /* UDF_n_B1 (lower) [31:24] (addr[103:96]) + * UDF_n_B0 [23:8] (addr[127:112]) + * Reserved [7:4] + * Slice ID [3:2] + * Slice valid [1:0] + */ + if (mask) + offset = CORE_CFP_MASK_PORT(0); + else + offset = CORE_CFP_DATA_PORT(0); + reg = core_readl(priv, offset); + tmp |= (reg >> 24) & 0xff; + tmp |= (u32)((reg >> 8) << 16); + ip6_addr[0] = cpu_to_be32(tmp); + + if (!mask && !(reg & SLICE_VALID)) + return -EINVAL; + + return 0; +} + +static int bcm_sf2_cfp_ipv6_rule_get(struct bcm_sf2_priv *priv, int port, + struct ethtool_rx_flow_spec *fs, + u32 next_loc) +{ + struct ethtool_tcpip6_spec *v6_spec = NULL, *v6_m_spec = NULL; + u32 reg; + int ret; + + /* UDPv6 and TCPv6 both use ethtool_tcpip6_spec so we are fine + * assuming tcp_ip6_spec here being an union. + */ + v6_spec = &fs->h_u.tcp_ip6_spec; + v6_m_spec = &fs->m_u.tcp_ip6_spec; + + /* Read the second half first */ + ret = bcm_sf2_cfp_unslice_ipv6(priv, v6_spec->ip6dst, &v6_spec->pdst, + false); + if (ret) + return ret; + + ret = bcm_sf2_cfp_unslice_ipv6(priv, v6_m_spec->ip6dst, + &v6_m_spec->pdst, true); + if (ret) + return ret; + + /* Read last to avoid next entry clobbering the results during search + * operations. We would not have the port enabled for this rule, so + * don't bother checking it. + */ + (void)core_readl(priv, CORE_CFP_DATA_PORT(7)); + + /* The slice number is valid, so read the rule we are chained from now + * which is our first half. + */ + bcm_sf2_cfp_rule_addr_set(priv, next_loc); + ret = bcm_sf2_cfp_op(priv, OP_SEL_READ | TCAM_SEL); + if (ret) + return ret; + + reg = core_readl(priv, CORE_CFP_DATA_PORT(6)); + + switch ((reg & IPPROTO_MASK) >> IPPROTO_SHIFT) { + case IPPROTO_TCP: + fs->flow_type = TCP_V6_FLOW; + break; + case IPPROTO_UDP: + fs->flow_type = UDP_V6_FLOW; + break; + default: + return -EINVAL; + } + + ret = bcm_sf2_cfp_unslice_ipv6(priv, v6_spec->ip6src, &v6_spec->psrc, + false); + if (ret) + return ret; + + return bcm_sf2_cfp_unslice_ipv6(priv, v6_m_spec->ip6src, + &v6_m_spec->psrc, true); +} + +static int bcm_sf2_cfp_rule_get(struct bcm_sf2_priv *priv, int port, + struct ethtool_rxnfc *nfc) +{ + u32 reg, ipv4_or_chain_id; + unsigned int queue_num; + int ret; + + bcm_sf2_cfp_rule_addr_set(priv, nfc->fs.location); + + ret = bcm_sf2_cfp_op(priv, OP_SEL_READ | ACT_POL_RAM); + if (ret) + return ret; + + reg = core_readl(priv, CORE_ACT_POL_DATA0); + + ret = bcm_sf2_cfp_op(priv, OP_SEL_READ | TCAM_SEL); + if (ret) + return ret; + + /* Extract the destination port */ + nfc->fs.ring_cookie = fls((reg >> DST_MAP_IB_SHIFT) & + DST_MAP_IB_MASK) - 1; + + /* There is no Port 6, so we compensate for that here */ + if (nfc->fs.ring_cookie >= 6) + nfc->fs.ring_cookie++; + nfc->fs.ring_cookie *= SF2_NUM_EGRESS_QUEUES; + + /* Extract the destination queue */ + queue_num = (reg >> NEW_TC_SHIFT) & NEW_TC_MASK; + nfc->fs.ring_cookie += queue_num; + + /* Extract the L3_FRAMING or CHAIN_ID */ + reg = core_readl(priv, CORE_CFP_DATA_PORT(6)); + + /* With IPv6 rules this would contain a non-zero chain ID since + * we reserve entry 0 and it cannot be used. So if we read 0 here + * this means an IPv4 rule. + */ + ipv4_or_chain_id = (reg >> L3_FRAMING_SHIFT) & 0xff; + if (ipv4_or_chain_id == 0) + ret = bcm_sf2_cfp_ipv4_rule_get(priv, port, &nfc->fs); + else + ret = bcm_sf2_cfp_ipv6_rule_get(priv, port, &nfc->fs, + ipv4_or_chain_id); + if (ret) + return ret; /* Read last to avoid next entry clobbering the results during search * operations @@ -486,44 +1163,11 @@ static int bcm_sf2_cfp_rule_get_all(struct bcm_sf2_priv *priv, u32 *rule_locs) { unsigned int index = 1, rules_cnt = 0; - int ret; - u32 reg; - /* Do not poll on OP_STR_DONE to be self-clearing for search - * operations, we cannot use bcm_sf2_cfp_op here because it completes - * on clearing OP_STR_DONE which won't clear until the entire search - * operation is over. - */ - reg = core_readl(priv, CORE_CFP_ACC); - reg &= ~(XCESS_ADDR_MASK << XCESS_ADDR_SHIFT); - reg |= index << XCESS_ADDR_SHIFT; - reg &= ~(OP_SEL_MASK | RAM_SEL_MASK); - reg |= OP_SEL_SEARCH | TCAM_SEL | OP_STR_DONE; - core_writel(priv, reg, CORE_CFP_ACC); - - do { - /* Wait for results to be ready */ - reg = core_readl(priv, CORE_CFP_ACC); - - /* Extract the address we are searching */ - index = reg >> XCESS_ADDR_SHIFT; - index &= XCESS_ADDR_MASK; - - /* We have a valid search result, so flag it accordingly */ - if (reg & SEARCH_STS) { - ret = bcm_sf2_cfp_rule_get(priv, port, nfc, true); - if (ret) - continue; - - rule_locs[rules_cnt] = index; - rules_cnt++; - } - - /* Search is over break out */ - if (!(reg & OP_STR_DONE)) - break; - - } while (index < priv->num_cfp_rules); + for_each_set_bit_from(index, priv->cfp.unique, priv->num_cfp_rules) { + rule_locs[rules_cnt] = index; + rules_cnt++; + } /* Put the TCAM size here */ nfc->data = bcm_sf2_cfp_rule_size(priv); @@ -543,13 +1187,13 @@ int bcm_sf2_get_rxnfc(struct dsa_switch *ds, int port, switch (nfc->cmd) { case ETHTOOL_GRXCLSRLCNT: /* Subtract the default, unusable rule */ - nfc->rule_cnt = bitmap_weight(priv->cfp.used, + nfc->rule_cnt = bitmap_weight(priv->cfp.unique, priv->num_cfp_rules) - 1; /* We support specifying rule locations */ nfc->data |= RX_CLS_LOC_SPECIAL; break; case ETHTOOL_GRXCLSRULE: - ret = bcm_sf2_cfp_rule_get(priv, port, nfc, false); + ret = bcm_sf2_cfp_rule_get(priv, port, nfc); break; case ETHTOOL_GRXCLSRLALL: ret = bcm_sf2_cfp_rule_get_all(priv, port, nfc, rule_locs); |
