summaryrefslogtreecommitdiffstats
path: root/drivers/net/bnx2x
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/bnx2x')
-rw-r--r--drivers/net/bnx2x/bnx2x.h4
-rw-r--r--drivers/net/bnx2x/bnx2x_cmn.c2
-rw-r--r--drivers/net/bnx2x/bnx2x_hsi.h9
-rw-r--r--drivers/net/bnx2x/bnx2x_link.c57
-rw-r--r--drivers/net/bnx2x/bnx2x_main.c2
5 files changed, 54 insertions, 20 deletions
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index 9eea225decaf..863e73a85fbe 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -20,8 +20,8 @@
* (you will need to reboot afterwards) */
/* #define BNX2X_STOP_ON_ERROR */
-#define DRV_MODULE_VERSION "1.60.00-3"
-#define DRV_MODULE_RELDATE "2010/10/19"
+#define DRV_MODULE_VERSION "1.60.00-4"
+#define DRV_MODULE_RELDATE "2010/11/01"
#define BNX2X_BC_VER 0x040200
#define BNX2X_MULTI_QUEUE
diff --git a/drivers/net/bnx2x/bnx2x_cmn.c b/drivers/net/bnx2x/bnx2x_cmn.c
index 459614d2d7bc..94d5f59d5a6f 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/bnx2x/bnx2x_cmn.c
@@ -1680,7 +1680,7 @@ static inline u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb)
rc = XMIT_PLAIN;
else {
- if (skb->protocol == htons(ETH_P_IPV6)) {
+ if (vlan_get_protocol(skb) == htons(ETH_P_IPV6)) {
rc = XMIT_CSUM_V6;
if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
rc |= XMIT_CSUM_TCP;
diff --git a/drivers/net/bnx2x/bnx2x_hsi.h b/drivers/net/bnx2x/bnx2x_hsi.h
index 18c8e23a0e82..4cfd4e9b5586 100644
--- a/drivers/net/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/bnx2x/bnx2x_hsi.h
@@ -244,7 +244,14 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */
u16 xgxs_config_tx[4]; /* 0x1A0 */
- u32 Reserved1[57]; /* 0x1A8 */
+ u32 Reserved1[56]; /* 0x1A8 */
+ u32 default_cfg; /* 0x288 */
+ /* Enable BAM on KR */
+#define PORT_HW_CFG_ENABLE_BAM_ON_KR_MASK 0x00100000
+#define PORT_HW_CFG_ENABLE_BAM_ON_KR_SHIFT 20
+#define PORT_HW_CFG_ENABLE_BAM_ON_KR_DISABLED 0x00000000
+#define PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED 0x00100000
+
u32 speed_capability_mask2; /* 0x28C */
#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_MASK 0x0000FFFF
#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_SHIFT 0
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index 2326774df843..580919619252 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -610,7 +610,7 @@ static u8 bnx2x_bmac_enable(struct link_params *params,
/* reset and unreset the BigMac */
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
- udelay(10);
+ msleep(1);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
@@ -3525,13 +3525,19 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy,
DP(NETIF_MSG_LINK, "Before rom RX_ALARM(port1): 0x%x\n", tmp1);
/* Enable CL37 BAM */
- bnx2x_cl45_read(bp, phy,
- MDIO_AN_DEVAD,
- MDIO_AN_REG_8073_BAM, &val);
- bnx2x_cl45_write(bp, phy,
- MDIO_AN_DEVAD,
- MDIO_AN_REG_8073_BAM, val | 1);
+ if (REG_RD(bp, params->shmem_base +
+ offsetof(struct shmem_region, dev_info.
+ port_hw_config[params->port].default_cfg)) &
+ PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED) {
+ bnx2x_cl45_read(bp, phy,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8073_BAM, &val);
+ bnx2x_cl45_write(bp, phy,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8073_BAM, val | 1);
+ DP(NETIF_MSG_LINK, "Enable CL37 BAM on KR\n");
+ }
if (params->loopback_mode == LOOPBACK_EXT) {
bnx2x_807x_force_10G(bp, phy);
DP(NETIF_MSG_LINK, "Forced speed 10G on 807X\n");
@@ -5302,7 +5308,7 @@ static u8 bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy,
{
struct bnx2x *bp = params->bp;
u16 autoneg_val, an_1000_val, an_10_100_val;
- bnx2x_wait_reset_complete(bp, phy);
+
bnx2x_bits_en(bp, NIG_REG_LATCH_BC_0 + params->port*4,
1 << NIG_LATCH_BC_ENABLE_MI_INT);
@@ -5431,6 +5437,7 @@ static u8 bnx2x_8481_config_init(struct bnx2x_phy *phy,
/* HW reset */
bnx2x_ext_phy_hw_reset(bp, params->port);
+ bnx2x_wait_reset_complete(bp, phy);
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15);
return bnx2x_848xx_cmn_config_init(phy, params, vars);
@@ -5441,7 +5448,7 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy,
struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
- u8 port = params->port, initialize = 1;
+ u8 port, initialize = 1;
u16 val;
u16 temp;
u32 actual_phy_selection;
@@ -5450,11 +5457,16 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy,
/* This is just for MDIO_CTL_REG_84823_MEDIA register. */
msleep(1);
+ if (CHIP_IS_E2(bp))
+ port = BP_PATH(bp);
+ else
+ port = params->port;
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
MISC_REGISTERS_GPIO_OUTPUT_HIGH,
port);
- msleep(200); /* 100 is not enough */
-
+ bnx2x_wait_reset_complete(bp, phy);
+ /* Wait for GPHY to come out of reset */
+ msleep(50);
/* BCM84823 requires that XGXS links up first @ 10G for normal
behavior */
temp = vars->line_speed;
@@ -5625,7 +5637,11 @@ static void bnx2x_848x3_link_reset(struct bnx2x_phy *phy,
struct link_params *params)
{
struct bnx2x *bp = params->bp;
- u8 port = params->port;
+ u8 port;
+ if (CHIP_IS_E2(bp))
+ port = BP_PATH(bp);
+ else
+ port = params->port;
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
MISC_REGISTERS_GPIO_OUTPUT_LOW,
port);
@@ -6928,7 +6944,7 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
u8 reset_ext_phy)
{
struct bnx2x *bp = params->bp;
- u8 phy_index, port = params->port;
+ u8 phy_index, port = params->port, clear_latch_ind = 0;
DP(NETIF_MSG_LINK, "Resetting the link of port %d\n", port);
/* disable attentions */
vars->link_status = 0;
@@ -6966,9 +6982,18 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
params->phy[phy_index].link_reset(
&params->phy[phy_index],
params);
+ if (params->phy[phy_index].flags &
+ FLAGS_REARM_LATCH_SIGNAL)
+ clear_latch_ind = 1;
}
}
+ if (clear_latch_ind) {
+ /* Clear latching indication */
+ bnx2x_rearm_latch_signal(bp, port, 0);
+ bnx2x_bits_dis(bp, NIG_REG_LATCH_BC_0 + port*4,
+ 1 << NIG_LATCH_BC_ENABLE_MI_INT);
+ }
if (params->phy[INT_PHY].link_reset)
params->phy[INT_PHY].link_reset(
&params->phy[INT_PHY], params);
@@ -6999,6 +7024,7 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp,
s8 port;
s8 port_of_path = 0;
+ bnx2x_ext_phy_hw_reset(bp, 0);
/* PART1 - Reset both phys */
for (port = PORT_MAX - 1; port >= PORT_0; port--) {
u32 shmem_base, shmem2_base;
@@ -7021,7 +7047,8 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp,
return -EINVAL;
}
/* disable attentions */
- bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
+ bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 +
+ port_of_path*4,
(NIG_MASK_XGXS0_LINK_STATUS |
NIG_MASK_XGXS0_LINK10G |
NIG_MASK_SERDES0_LINK_STATUS |
@@ -7132,7 +7159,7 @@ static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp,
(1<<(MISC_REGISTERS_GPIO_3 + MISC_REGISTERS_GPIO_PORT_SHIFT)));
REG_WR(bp, MISC_REG_GPIO_EVENT_EN, val);
- bnx2x_ext_phy_hw_reset(bp, 1);
+ bnx2x_ext_phy_hw_reset(bp, 0);
msleep(5);
for (port = 0; port < PORT_MAX; port++) {
u32 shmem_base, shmem2_base;
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index e9ad16f00b56..9709b8569666 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -9064,7 +9064,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
default:
pr_err("Unknown board_type (%ld), aborting\n",
ent->driver_data);
- return ENODEV;
+ return -ENODEV;
}
cid_count += CNIC_CONTEXT_USE;
OpenPOWER on IntegriCloud