summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r--drivers/mtd/nand/Kconfig13
-rw-r--r--drivers/mtd/nand/bf5xx_nand.c93
-rw-r--r--drivers/mtd/nand/diskonchip.c30
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c2
-rw-r--r--drivers/mtd/nand/nandsim.c66
5 files changed, 146 insertions, 58 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 71406e517857..02f9cc30d77b 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -104,11 +104,24 @@ config MTD_NAND_BF5XX
config MTD_NAND_BF5XX_HWECC
bool "BF5XX NAND Hardware ECC"
+ default y
depends on MTD_NAND_BF5XX
help
Enable the use of the BF5XX's internal ECC generator when
using NAND.
+config MTD_NAND_BF5XX_BOOTROM_ECC
+ bool "Use Blackfin BootROM ECC Layout"
+ default n
+ depends on MTD_NAND_BF5XX_HWECC
+ help
+ If you wish to modify NAND pages and allow the Blackfin on-chip
+ BootROM to boot from them, say Y here. This is only necessary
+ if you are booting U-Boot out of NAND and you wish to update
+ U-Boot from Linux' userspace. Otherwise, you should say N here.
+
+ If unsure, say N.
+
config MTD_NAND_RTC_FROM4
tristate "Renesas Flash ROM 4-slot interface board (FROM_BOARD4)"
depends on SH_SOLUTION_ENGINE
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index e87a57297328..9af2a2cc1153 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -91,6 +91,41 @@ static const unsigned short bfin_nfc_pin_req[] =
P_NAND_ALE,
0};
+#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
+static uint8_t bbt_pattern[] = { 0xff };
+
+static struct nand_bbt_descr bootrom_bbt = {
+ .options = 0,
+ .offs = 63,
+ .len = 1,
+ .pattern = bbt_pattern,
+};
+
+static struct nand_ecclayout bootrom_ecclayout = {
+ .eccbytes = 24,
+ .eccpos = {
+ 0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2,
+ 0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2,
+ 0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2,
+ 0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2,
+ 0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2,
+ 0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2,
+ 0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2,
+ 0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2
+ },
+ .oobfree = {
+ { 0x8 * 0 + 3, 5 },
+ { 0x8 * 1 + 3, 5 },
+ { 0x8 * 2 + 3, 5 },
+ { 0x8 * 3 + 3, 5 },
+ { 0x8 * 4 + 3, 5 },
+ { 0x8 * 5 + 3, 5 },
+ { 0x8 * 6 + 3, 5 },
+ { 0x8 * 7 + 3, 5 },
+ }
+};
+#endif
+
/*
* Data structures for bf5xx nand flash controller driver
*/
@@ -273,7 +308,7 @@ static int bf5xx_nand_correct_data(struct mtd_info *mtd, u_char *dat,
dat += 256;
read_ecc += 8;
calc_ecc += 8;
- ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
+ ret |= bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
}
return ret;
@@ -298,7 +333,7 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
ecc0 = bfin_read_NFC_ECC0();
ecc1 = bfin_read_NFC_ECC1();
- code[0] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11);
+ code[0] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]);
@@ -310,7 +345,7 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
if (page_size == 512) {
ecc0 = bfin_read_NFC_ECC2();
ecc1 = bfin_read_NFC_ECC3();
- code[1] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11);
+ code[1] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
/* second 3 bytes in ecc_code for second 256
* bytes of 512 page size
@@ -514,7 +549,6 @@ static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd,
/*
* System initialization functions
*/
-
static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info)
{
int ret;
@@ -547,6 +581,13 @@ static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info)
return 0;
}
+static void bf5xx_nand_dma_remove(struct bf5xx_nand_info *info)
+{
+ /* Free NFC DMA channel */
+ if (hardware_ecc)
+ free_dma(CH_NFC);
+}
+
/*
* BF5XX NFC hardware initialization
* - pin mux setup
@@ -605,7 +646,7 @@ static int bf5xx_nand_add_partition(struct bf5xx_nand_info *info)
#endif
}
-static int bf5xx_nand_remove(struct platform_device *pdev)
+static int __devexit bf5xx_nand_remove(struct platform_device *pdev)
{
struct bf5xx_nand_info *info = to_nand_info(pdev);
struct mtd_info *mtd = NULL;
@@ -623,6 +664,7 @@ static int bf5xx_nand_remove(struct platform_device *pdev)
}
peripheral_free_list(bfin_nfc_pin_req);
+ bf5xx_nand_dma_remove(info);
/* free the common resources */
kfree(info);
@@ -638,7 +680,7 @@ static int bf5xx_nand_remove(struct platform_device *pdev)
* it can allocate all necessary resources then calls the
* nand layer to look for devices
*/
-static int bf5xx_nand_probe(struct platform_device *pdev)
+static int __devinit bf5xx_nand_probe(struct platform_device *pdev)
{
struct bf5xx_nand_platform *plat = to_nand_plat(pdev);
struct bf5xx_nand_info *info = NULL;
@@ -648,22 +690,21 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "(%p)\n", pdev);
- if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) {
- printk(KERN_ERR DRV_NAME
- ": Requesting Peripherals failed\n");
- return -EFAULT;
- }
-
if (!plat) {
dev_err(&pdev->dev, "no platform specific information\n");
- goto exit_error;
+ return -EINVAL;
+ }
+
+ if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) {
+ dev_err(&pdev->dev, "requesting Peripherals failed\n");
+ return -EFAULT;
}
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (info == NULL) {
dev_err(&pdev->dev, "no memory for flash info\n");
err = -ENOMEM;
- goto exit_error;
+ goto out_err_kzalloc;
}
platform_set_drvdata(pdev, info);
@@ -707,11 +748,16 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
/* initialise the hardware */
err = bf5xx_nand_hw_init(info);
- if (err != 0)
- goto exit_error;
+ if (err)
+ goto out_err_hw_init;
/* setup hardware ECC data struct */
if (hardware_ecc) {
+#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
+ chip->badblock_pattern = &bootrom_bbt;
+ chip->ecc.layout = &bootrom_ecclayout;
+#endif
+
if (plat->page_size == NFC_PG_SIZE_256) {
chip->ecc.bytes = 3;
chip->ecc.size = 256;
@@ -733,7 +779,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
/* scan hardware nand chip and setup mtd info data struct */
if (nand_scan(mtd, 1)) {
err = -ENXIO;
- goto exit_error;
+ goto out_err_nand_scan;
}
/* add NAND partition */
@@ -742,11 +788,14 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "initialised ok\n");
return 0;
-exit_error:
- bf5xx_nand_remove(pdev);
+out_err_nand_scan:
+ bf5xx_nand_dma_remove(info);
+out_err_hw_init:
+ platform_set_drvdata(pdev, NULL);
+ kfree(info);
+out_err_kzalloc:
+ peripheral_free_list(bfin_nfc_pin_req);
- if (err == 0)
- err = -EINVAL;
return err;
}
@@ -775,7 +824,7 @@ static int bf5xx_nand_resume(struct platform_device *dev)
/* driver device registration */
static struct platform_driver bf5xx_nand_driver = {
.probe = bf5xx_nand_probe,
- .remove = bf5xx_nand_remove,
+ .remove = __devexit_p(bf5xx_nand_remove),
.suspend = bf5xx_nand_suspend,
.resume = bf5xx_nand_resume,
.driver = {
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index 765d4f0f7c86..e4226e02d63e 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -1125,9 +1125,9 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio
goto out;
mh = (struct NFTLMediaHeader *)buf;
- mh->NumEraseUnits = le16_to_cpu(mh->NumEraseUnits);
- mh->FirstPhysicalEUN = le16_to_cpu(mh->FirstPhysicalEUN);
- mh->FormattedSize = le32_to_cpu(mh->FormattedSize);
+ le16_to_cpus(&mh->NumEraseUnits);
+ le16_to_cpus(&mh->FirstPhysicalEUN);
+ le32_to_cpus(&mh->FormattedSize);
printk(KERN_INFO " DataOrgID = %s\n"
" NumEraseUnits = %d\n"
@@ -1235,12 +1235,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti
doc->mh1_page = doc->mh0_page + (4096 >> this->page_shift);
mh = (struct INFTLMediaHeader *)buf;
- mh->NoOfBootImageBlocks = le32_to_cpu(mh->NoOfBootImageBlocks);
- mh->NoOfBinaryPartitions = le32_to_cpu(mh->NoOfBinaryPartitions);
- mh->NoOfBDTLPartitions = le32_to_cpu(mh->NoOfBDTLPartitions);
- mh->BlockMultiplierBits = le32_to_cpu(mh->BlockMultiplierBits);
- mh->FormatFlags = le32_to_cpu(mh->FormatFlags);
- mh->PercentUsed = le32_to_cpu(mh->PercentUsed);
+ le32_to_cpus(&mh->NoOfBootImageBlocks);
+ le32_to_cpus(&mh->NoOfBinaryPartitions);
+ le32_to_cpus(&mh->NoOfBDTLPartitions);
+ le32_to_cpus(&mh->BlockMultiplierBits);
+ le32_to_cpus(&mh->FormatFlags);
+ le32_to_cpus(&mh->PercentUsed);
printk(KERN_INFO " bootRecordID = %s\n"
" NoOfBootImageBlocks = %d\n"
@@ -1277,12 +1277,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti
/* Scan the partitions */
for (i = 0; (i < 4); i++) {
ip = &(mh->Partitions[i]);
- ip->virtualUnits = le32_to_cpu(ip->virtualUnits);
- ip->firstUnit = le32_to_cpu(ip->firstUnit);
- ip->lastUnit = le32_to_cpu(ip->lastUnit);
- ip->flags = le32_to_cpu(ip->flags);
- ip->spareUnits = le32_to_cpu(ip->spareUnits);
- ip->Reserved0 = le32_to_cpu(ip->Reserved0);
+ le32_to_cpus(&ip->virtualUnits);
+ le32_to_cpus(&ip->firstUnit);
+ le32_to_cpus(&ip->lastUnit);
+ le32_to_cpus(&ip->flags);
+ le32_to_cpus(&ip->spareUnits);
+ le32_to_cpus(&ip->Reserved0);
printk(KERN_INFO " PARTITION[%d] ->\n"
" virtualUnits = %d\n"
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 9dff51351f4f..98ad3cefcaf4 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -887,7 +887,7 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
goto err;
}
- priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", res.start);
+ priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", (unsigned)res.start);
if (!priv->mtd.name) {
ret = -ENOMEM;
goto err;
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index ecd70e2504f6..556e8131ecdc 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -28,6 +28,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
+#include <asm/div64.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/string.h>
@@ -207,13 +208,16 @@ MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the I
#define STATE_CMD_READID 0x0000000A /* read ID */
#define STATE_CMD_ERASE2 0x0000000B /* sector erase second command */
#define STATE_CMD_RESET 0x0000000C /* reset */
+#define STATE_CMD_RNDOUT 0x0000000D /* random output command */
+#define STATE_CMD_RNDOUTSTART 0x0000000E /* random output start command */
#define STATE_CMD_MASK 0x0000000F /* command states mask */
/* After an address is input, the simulator goes to one of these states */
#define STATE_ADDR_PAGE 0x00000010 /* full (row, column) address is accepted */
#define STATE_ADDR_SEC 0x00000020 /* sector address was accepted */
-#define STATE_ADDR_ZERO 0x00000030 /* one byte zero address was accepted */
-#define STATE_ADDR_MASK 0x00000030 /* address states mask */
+#define STATE_ADDR_COLUMN 0x00000030 /* column address was accepted */
+#define STATE_ADDR_ZERO 0x00000040 /* one byte zero address was accepted */
+#define STATE_ADDR_MASK 0x00000070 /* address states mask */
/* Durind data input/output the simulator is in these states */
#define STATE_DATAIN 0x00000100 /* waiting for data input */
@@ -240,7 +244,7 @@ MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the I
#define ACTION_OOBOFF 0x00600000 /* add to address OOB offset */
#define ACTION_MASK 0x00700000 /* action mask */
-#define NS_OPER_NUM 12 /* Number of operations supported by the simulator */
+#define NS_OPER_NUM 13 /* Number of operations supported by the simulator */
#define NS_OPER_STATES 6 /* Maximum number of states in operation */
#define OPT_ANY 0xFFFFFFFF /* any chip supports this operation */
@@ -373,7 +377,10 @@ static struct nandsim_operations {
{OPT_ANY, {STATE_CMD_READID, STATE_ADDR_ZERO, STATE_DATAOUT_ID, STATE_READY}},
/* Large page devices read page */
{OPT_LARGEPAGE, {STATE_CMD_READ0, STATE_ADDR_PAGE, STATE_CMD_READSTART | ACTION_CPY,
- STATE_DATAOUT, STATE_READY}}
+ STATE_DATAOUT, STATE_READY}},
+ /* Large page devices random page read */
+ {OPT_LARGEPAGE, {STATE_CMD_RNDOUT, STATE_ADDR_COLUMN, STATE_CMD_RNDOUTSTART | ACTION_CPY,
+ STATE_DATAOUT, STATE_READY}},
};
struct weak_block {
@@ -579,7 +586,8 @@ static int init_nandsim(struct mtd_info *mtd)
if (ns->busw == 16)
NS_WARN("16-bit flashes support wasn't tested\n");
- printk("flash size: %llu MiB\n", ns->geom.totsz >> 20);
+ printk("flash size: %llu MiB\n",
+ (unsigned long long)ns->geom.totsz >> 20);
printk("page size: %u bytes\n", ns->geom.pgsz);
printk("OOB area size: %u bytes\n", ns->geom.oobsz);
printk("sector size: %u KiB\n", ns->geom.secsz >> 10);
@@ -588,8 +596,9 @@ static int init_nandsim(struct mtd_info *mtd)
printk("bus width: %u\n", ns->busw);
printk("bits in sector size: %u\n", ns->geom.secshift);
printk("bits in page size: %u\n", ns->geom.pgshift);
- printk("bits in OOB size: %u\n", ns->geom.oobshift);
- printk("flash size with OOB: %llu KiB\n", ns->geom.totszoob >> 10);
+ printk("bits in OOB size: %u\n", ns->geom.oobshift);
+ printk("flash size with OOB: %llu KiB\n",
+ (unsigned long long)ns->geom.totszoob >> 10);
printk("page address bytes: %u\n", ns->geom.pgaddrbytes);
printk("sector address bytes: %u\n", ns->geom.secaddrbytes);
printk("options: %#x\n", ns->options);
@@ -937,12 +946,18 @@ static char *get_state_name(uint32_t state)
return "STATE_CMD_ERASE2";
case STATE_CMD_RESET:
return "STATE_CMD_RESET";
+ case STATE_CMD_RNDOUT:
+ return "STATE_CMD_RNDOUT";
+ case STATE_CMD_RNDOUTSTART:
+ return "STATE_CMD_RNDOUTSTART";
case STATE_ADDR_PAGE:
return "STATE_ADDR_PAGE";
case STATE_ADDR_SEC:
return "STATE_ADDR_SEC";
case STATE_ADDR_ZERO:
return "STATE_ADDR_ZERO";
+ case STATE_ADDR_COLUMN:
+ return "STATE_ADDR_COLUMN";
case STATE_DATAIN:
return "STATE_DATAIN";
case STATE_DATAOUT:
@@ -973,6 +988,7 @@ static int check_command(int cmd)
switch (cmd) {
case NAND_CMD_READ0:
+ case NAND_CMD_READ1:
case NAND_CMD_READSTART:
case NAND_CMD_PAGEPROG:
case NAND_CMD_READOOB:
@@ -982,7 +998,8 @@ static int check_command(int cmd)
case NAND_CMD_READID:
case NAND_CMD_ERASE2:
case NAND_CMD_RESET:
- case NAND_CMD_READ1:
+ case NAND_CMD_RNDOUT:
+ case NAND_CMD_RNDOUTSTART:
return 0;
case NAND_CMD_STATUS_MULTI:
@@ -1021,6 +1038,10 @@ static uint32_t get_state_by_command(unsigned command)
return STATE_CMD_ERASE2;
case NAND_CMD_RESET:
return STATE_CMD_RESET;
+ case NAND_CMD_RNDOUT:
+ return STATE_CMD_RNDOUT;
+ case NAND_CMD_RNDOUTSTART:
+ return STATE_CMD_RNDOUTSTART;
}
NS_ERR("get_state_by_command: unknown command, BUG\n");
@@ -1582,6 +1603,11 @@ static void switch_state(struct nandsim *ns)
ns->regs.num = 1;
break;
+ case STATE_ADDR_COLUMN:
+ /* Column address is always 2 bytes */
+ ns->regs.num = ns->geom.pgaddrbytes - ns->geom.secaddrbytes;
+ break;
+
default:
NS_ERR("switch_state: BUG! unknown address state\n");
}
@@ -1693,15 +1719,21 @@ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
return;
}
- /*
- * Chip might still be in STATE_DATAOUT
- * (if OPT_AUTOINCR feature is supported), STATE_DATAOUT_STATUS or
- * STATE_DATAOUT_STATUS_M state. If so, switch state.
- */
+ /* Check that the command byte is correct */
+ if (check_command(byte)) {
+ NS_ERR("write_byte: unknown command %#x\n", (uint)byte);
+ return;
+ }
+
if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS
|| NS_STATE(ns->state) == STATE_DATAOUT_STATUS_M
- || ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT))
+ || NS_STATE(ns->state) == STATE_DATAOUT) {
+ int row = ns->regs.row;
+
switch_state(ns);
+ if (byte == NAND_CMD_RNDOUT)
+ ns->regs.row = row;
+ }
/* Check if chip is expecting command */
if (NS_STATE(ns->nxstate) != STATE_UNKNOWN && !(ns->nxstate & STATE_CMD_MASK)) {
@@ -1715,12 +1747,6 @@ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
}
- /* Check that the command byte is correct */
- if (check_command(byte)) {
- NS_ERR("write_byte: unknown command %#x\n", (uint)byte);
- return;
- }
-
NS_DBG("command byte corresponding to %s state accepted\n",
get_state_name(get_state_by_command(byte)));
ns->regs.command = byte;
OpenPOWER on IntegriCloud