summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/cb710-mmc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/cb710-mmc.c')
-rw-r--r--drivers/mmc/host/cb710-mmc.c54
1 files changed, 25 insertions, 29 deletions
diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c
index ca3bdc831900..66b4ce587f4b 100644
--- a/drivers/mmc/host/cb710-mmc.c
+++ b/drivers/mmc/host/cb710-mmc.c
@@ -25,7 +25,7 @@ static const u8 cb710_src_freq_mhz[16] = {
50, 55, 60, 65, 70, 75, 80, 85
};
-static void cb710_mmc_set_clock(struct mmc_host *mmc, int hz)
+static void cb710_mmc_select_clock_divider(struct mmc_host *mmc, int hz)
{
struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
struct pci_dev *pdev = cb710_slot_to_chip(slot)->pdev;
@@ -33,8 +33,11 @@ static void cb710_mmc_set_clock(struct mmc_host *mmc, int hz)
u32 divider_idx;
int src_hz;
- /* this is magic, unverifiable for me, unless I get
- * MMC card with cables connected to bus signals */
+ /* on CB710 in HP nx9500:
+ * src_freq_idx == 0
+ * indexes 1-7 work as written in the table
+ * indexes 0,8-15 give no clock output
+ */
pci_read_config_dword(pdev, 0x48, &src_freq_idx);
src_freq_idx = (src_freq_idx >> 16) & 0xF;
src_hz = cb710_src_freq_mhz[src_freq_idx] * 1000000;
@@ -46,13 +49,15 @@ static void cb710_mmc_set_clock(struct mmc_host *mmc, int hz)
if (src_freq_idx)
divider_idx |= 0x8;
+ else if (divider_idx == 0)
+ divider_idx = 1;
cb710_pci_update_config_reg(pdev, 0x40, ~0xF0000000, divider_idx << 28);
dev_dbg(cb710_slot_dev(slot),
- "clock set to %d Hz, wanted %d Hz; flag = %d\n",
+ "clock set to %d Hz, wanted %d Hz; src_freq_idx = %d, divider_idx = %d|%d\n",
src_hz >> cb710_clock_divider_log2[divider_idx & 7],
- hz, (divider_idx & 8) != 0);
+ hz, src_freq_idx, divider_idx & 7, divider_idx & 8);
}
static void __cb710_mmc_enable_irq(struct cb710_slot *slot,
@@ -95,16 +100,8 @@ static void cb710_mmc_reset_events(struct cb710_slot *slot)
cb710_write_port_8(slot, CB710_MMC_STATUS2_PORT, 0xFF);
}
-static int cb710_mmc_is_card_inserted(struct cb710_slot *slot)
-{
- return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
- & CB710_MMC_S3_CARD_DETECTED;
-}
-
static void cb710_mmc_enable_4bit_data(struct cb710_slot *slot, int enable)
{
- dev_dbg(cb710_slot_dev(slot), "configuring %d-data-line%s mode\n",
- enable ? 4 : 1, enable ? "s" : "");
if (enable)
cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT,
CB710_MMC_C1_4BIT_DATA_BUS, 0);
@@ -494,13 +491,8 @@ static void cb710_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
reader->mrq = mrq;
cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0);
- if (cb710_mmc_is_card_inserted(slot)) {
- if (!cb710_mmc_command(mmc, mrq->cmd) && mrq->stop)
- cb710_mmc_command(mmc, mrq->stop);
- mdelay(1);
- } else {
- mrq->cmd->error = -ENOMEDIUM;
- }
+ if (!cb710_mmc_command(mmc, mrq->cmd) && mrq->stop)
+ cb710_mmc_command(mmc, mrq->stop);
tasklet_schedule(&reader->finish_req_tasklet);
}
@@ -512,7 +504,7 @@ static int cb710_mmc_powerup(struct cb710_slot *slot)
#endif
int err;
- /* a lot of magic; see comment in cb710_mmc_set_clock() */
+ /* a lot of magic for now */
dev_dbg(cb710_slot_dev(slot), "bus powerup\n");
cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
@@ -572,13 +564,7 @@ static void cb710_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
struct cb710_mmc_reader *reader = mmc_priv(mmc);
int err;
- cb710_mmc_set_clock(mmc, ios->clock);
-
- if (!cb710_mmc_is_card_inserted(slot)) {
- dev_dbg(cb710_slot_dev(slot),
- "no card inserted - ignoring bus powerup request\n");
- ios->power_mode = MMC_POWER_OFF;
- }
+ cb710_mmc_select_clock_divider(mmc, ios->clock);
if (ios->power_mode != reader->last_power_mode)
switch (ios->power_mode) {
@@ -619,6 +605,14 @@ static int cb710_mmc_get_ro(struct mmc_host *mmc)
& CB710_MMC_S3_WRITE_PROTECTED;
}
+static int cb710_mmc_get_cd(struct mmc_host *mmc)
+{
+ struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+
+ return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
+ & CB710_MMC_S3_CARD_DETECTED;
+}
+
static int cb710_mmc_irq_handler(struct cb710_slot *slot)
{
struct mmc_host *mmc = cb710_slot_to_mmc(slot);
@@ -664,7 +658,8 @@ static void cb710_mmc_finish_request_tasklet(unsigned long data)
static const struct mmc_host_ops cb710_mmc_host = {
.request = cb710_mmc_request,
.set_ios = cb710_mmc_set_ios,
- .get_ro = cb710_mmc_get_ro
+ .get_ro = cb710_mmc_get_ro,
+ .get_cd = cb710_mmc_get_cd,
};
#ifdef CONFIG_PM
@@ -746,6 +741,7 @@ static int __devinit cb710_mmc_init(struct platform_device *pdev)
err_free_mmc:
dev_dbg(cb710_slot_dev(slot), "mmc_add_host() failed: %d\n", err);
+ cb710_set_irq_handler(slot, NULL);
mmc_free_host(mmc);
return err;
}
OpenPOWER on IntegriCloud