diff options
Diffstat (limited to 'drivers/media/video/gspca/pac7302.c')
| -rw-r--r-- | drivers/media/video/gspca/pac7302.c | 185 |
1 files changed, 109 insertions, 76 deletions
diff --git a/drivers/media/video/gspca/pac7302.c b/drivers/media/video/gspca/pac7302.c index 30662fccb0cf..a0369a58c4bb 100644 --- a/drivers/media/video/gspca/pac7302.c +++ b/drivers/media/video/gspca/pac7302.c @@ -23,43 +23,58 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -/* Some documentation about various registers as determined by trial and error. - - Register page 1: - - Address Description - 0x78 Global control, bit 6 controls the LED (inverted) - - Register page 3: - - Address Description - 0x02 Clock divider 3-63, fps = 90 / val. Must be a multiple of 3 on - the 7302, so one of 3, 6, 9, ..., except when between 6 and 12? - 0x03 Variable framerate ctrl reg2==3: 0 -> ~30 fps, 255 -> ~22fps - 0x04 Another var framerate ctrl reg2==3, reg3==0: 0 -> ~30 fps, - 63 -> ~27 fps, the 2 msb's must always be 1 !! - 0x05 Another var framerate ctrl reg2==3, reg3==0, reg4==0xc0: - 1 -> ~30 fps, 2 -> ~20 fps - 0x0e Exposure bits 0-7, 0-448, 0 = use full frame time - 0x0f Exposure bit 8, 0-448, 448 = no exposure at all - 0x10 Master gain 0-31 - 0x21 Bitfield: 0-1 unused, 2-3 vflip/hflip, 4-5 unknown, 6-7 unused - - The registers are accessed in the following functions: - - Page | Register | Function - -----+------------+--------------------------------------------------- - 0 | 0x0f..0x20 | setcolors() - 0 | 0xa2..0xab | setbrightcont() - 0 | 0xc5 | setredbalance() - 0 | 0xc6 | setwhitebalance() - 0 | 0xc7 | setbluebalance() - 0 | 0xdc | setbrightcont(), setcolors() - 3 | 0x02 | setexposure() - 3 | 0x10 | setgain() - 3 | 0x11 | setcolors(), setgain(), setexposure(), sethvflip() - 3 | 0x21 | sethvflip() -*/ +/* + * Some documentation about various registers as determined by trial and error. + * + * Register page 1: + * + * Address Description + * 0x78 Global control, bit 6 controls the LED (inverted) + * 0x80 Compression balance, 2 interesting settings: + * 0x0f Default + * 0x50 Values >= this switch the camera to a lower compression, + * using the same table for both luminance and chrominance. + * This gives a sharper picture. Only usable when running + * at < 15 fps! Note currently the driver does not use this + * as the quality gain is small and the generated JPG-s are + * only understood by v4l-utils >= 0.8.9 + * + * Register page 3: + * + * Address Description + * 0x02 Clock divider 3-63, fps = 90 / val. Must be a multiple of 3 on + * the 7302, so one of 3, 6, 9, ..., except when between 6 and 12? + * 0x03 Variable framerate ctrl reg2==3: 0 -> ~30 fps, 255 -> ~22fps + * 0x04 Another var framerate ctrl reg2==3, reg3==0: 0 -> ~30 fps, + * 63 -> ~27 fps, the 2 msb's must always be 1 !! + * 0x05 Another var framerate ctrl reg2==3, reg3==0, reg4==0xc0: + * 1 -> ~30 fps, 2 -> ~20 fps + * 0x0e Exposure bits 0-7, 0-448, 0 = use full frame time + * 0x0f Exposure bit 8, 0-448, 448 = no exposure at all + * 0x10 Gain 0-31 + * 0x12 Another gain 0-31, unlike 0x10 this one seems to start with an + * amplification value of 1 rather then 0 at its lowest setting + * 0x21 Bitfield: 0-1 unused, 2-3 vflip/hflip, 4-5 unknown, 6-7 unused + * 0x80 Another framerate control, best left at 1, moving it from 1 to + * 2 causes the framerate to become 3/4th of what it was, and + * also seems to cause pixel averaging, resulting in an effective + * resolution of 320x240 and thus a much blockier image + * + * The registers are accessed in the following functions: + * + * Page | Register | Function + * -----+------------+--------------------------------------------------- + * 0 | 0x0f..0x20 | setcolors() + * 0 | 0xa2..0xab | setbrightcont() + * 0 | 0xc5 | setredbalance() + * 0 | 0xc6 | setwhitebalance() + * 0 | 0xc7 | setbluebalance() + * 0 | 0xdc | setbrightcont(), setcolors() + * 3 | 0x02 | setexposure() + * 3 | 0x10, 0x12 | setgain() + * 3 | 0x11 | setcolors(), setgain(), setexposure(), sethvflip() + * 3 | 0x21 | sethvflip() + */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -89,7 +104,6 @@ enum e_ctrl { NCTRLS /* number of controls */ }; -/* specific webcam descriptor for pac7302 */ struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ @@ -198,10 +212,10 @@ static const struct ctrl sd_ctrls[] = { .type = V4L2_CTRL_TYPE_INTEGER, .name = "Gain", .minimum = 0, - .maximum = 255, + .maximum = 62, .step = 1, -#define GAIN_DEF 127 -#define GAIN_KNEE 255 /* Gain seems to cause little noise on the pac73xx */ +#define GAIN_DEF 15 +#define GAIN_KNEE 46 .default_value = GAIN_DEF, }, .set_control = setgain @@ -270,7 +284,6 @@ static const struct v4l2_pix_format vga_mode[] = { #define LOAD_PAGE3 255 #define END_OF_SEQUENCE 0 -/* pac 7302 */ static const u8 init_7302[] = { /* index,value */ 0xff, 0x01, /* page 1 */ @@ -509,7 +522,6 @@ static int sd_config(struct gspca_dev *gspca_dev, return 0; } -/* This function is used by pac7302 only */ static void setbrightcont(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -536,7 +548,6 @@ static void setbrightcont(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0xdc, 0x01); } -/* This function is used by pac7302 only */ static void setcolors(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -590,9 +601,19 @@ static void setbluebalance(struct gspca_dev *gspca_dev) static void setgain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + u8 reg10, reg12; + + if (sd->ctrls[GAIN].val < 32) { + reg10 = sd->ctrls[GAIN].val; + reg12 = 0; + } else { + reg10 = 31; + reg12 = sd->ctrls[GAIN].val - 31; + } reg_w(gspca_dev, 0xff, 0x03); /* page 3 */ - reg_w(gspca_dev, 0x10, sd->ctrls[GAIN].val >> 3); + reg_w(gspca_dev, 0x10, reg10); + reg_w(gspca_dev, 0x12, reg12); /* load registers to sensor (Bit 0, auto clear) */ reg_w(gspca_dev, 0x11, 0x01); @@ -604,28 +625,36 @@ static void setexposure(struct gspca_dev *gspca_dev) u8 clockdiv; u16 exposure; - /* register 2 of frame 3 contains the clock divider configuring the - no fps according to the formula: 90 / reg. sd->exposure is the - desired exposure time in 0.5 ms. */ + /* + * Register 2 of frame 3 contains the clock divider configuring the + * no fps according to the formula: 90 / reg. sd->exposure is the + * desired exposure time in 0.5 ms. + */ clockdiv = (90 * sd->ctrls[EXPOSURE].val + 1999) / 2000; - /* Note clockdiv = 3 also works, but when running at 30 fps, depending - on the scene being recorded, the camera switches to another - quantization table for certain JPEG blocks, and we don't know how - to decompress these blocks. So we cap the framerate at 15 fps */ + /* + * Note clockdiv = 3 also works, but when running at 30 fps, depending + * on the scene being recorded, the camera switches to another + * quantization table for certain JPEG blocks, and we don't know how + * to decompress these blocks. So we cap the framerate at 15 fps. + */ if (clockdiv < 6) clockdiv = 6; else if (clockdiv > 63) clockdiv = 63; - /* reg2 MUST be a multiple of 3, except when between 6 and 12? - Always round up, otherwise we cannot get the desired frametime - using the partial frame time exposure control */ + /* + * Register 2 MUST be a multiple of 3, except when between 6 and 12? + * Always round up, otherwise we cannot get the desired frametime + * using the partial frame time exposure control. + */ if (clockdiv < 6 || clockdiv > 12) clockdiv = ((clockdiv + 2) / 3) * 3; - /* frame exposure time in ms = 1000 * clockdiv / 90 -> - exposure = (sd->exposure / 2) * 448 / (1000 * clockdiv / 90) */ + /* + * frame exposure time in ms = 1000 * clockdiv / 90 -> + * exposure = (sd->exposure / 2) * 448 / (1000 * clockdiv / 90) + */ exposure = (sd->ctrls[EXPOSURE].val * 45 * 448) / (1000 * clockdiv); /* 0 = use full frametime, 448 = no exposure, reverse it */ exposure = 448 - exposure; @@ -643,10 +672,12 @@ static void setautogain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - /* when switching to autogain set defaults to make sure - we are on a valid point of the autogain gain / - exposure knee graph, and give this change time to - take effect before doing autogain. */ + /* + * When switching to autogain set defaults to make sure + * we are on a valid point of the autogain gain / + * exposure knee graph, and give this change time to + * take effect before doing autogain. + */ if (sd->ctrls[AUTOGAIN].val) { sd->ctrls[EXPOSURE].val = EXPOSURE_DEF; sd->ctrls[GAIN].val = GAIN_DEF; @@ -700,8 +731,6 @@ static int sd_start(struct gspca_dev *gspca_dev) setautogain(gspca_dev); sethvflip(gspca_dev); - /* only resolution 640x480 is supported for pac7302 */ - sd->sof_read = 0; atomic_set(&sd->avg_lum, 270 + sd->ctrls[BRIGHTNESS].val); @@ -729,9 +758,7 @@ static void sd_stop0(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x78, 0x40); } -/* !! coarse_grained_expo_autogain is not used !! */ -#define exp_too_low_cnt flags -#define exp_too_high_cnt sof_read +#define WANT_REGULAR_AUTOGAIN #include "autogain_functions.h" static void do_autogain(struct gspca_dev *gspca_dev) @@ -792,10 +819,12 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, if (sof) { int n, lum_offset, footer_length; - /* 6 bytes after the FF D9 EOF marker a number of lumination - bytes are send corresponding to different parts of the - image, the 14th and 15th byte after the EOF seem to - correspond to the center of the image */ + /* + * 6 bytes after the FF D9 EOF marker a number of lumination + * bytes are send corresponding to different parts of the + * image, the 14th and 15th byte after the EOF seem to + * correspond to the center of the image. + */ lum_offset = 61 + sizeof pac_sof_marker; footer_length = 74; @@ -839,9 +868,10 @@ static int sd_dbg_s_register(struct gspca_dev *gspca_dev, u8 index; u8 value; - /* reg->reg: bit0..15: reserved for register index (wIndex is 16bit - long on the USB bus) - */ + /* + * reg->reg: bit0..15: reserved for register index (wIndex is 16bit + * long on the USB bus) + */ if (reg->match.type == V4L2_CHIP_MATCH_HOST && reg->match.addr == 0 && (reg->reg < 0x000000ff) && @@ -852,9 +882,11 @@ static int sd_dbg_s_register(struct gspca_dev *gspca_dev, index = reg->reg; value = reg->val; - /* Note that there shall be no access to other page - by any other function between the page swith and - the actual register write */ + /* + * Note that there shall be no access to other page + * by any other function between the page switch and + * the actual register write. + */ reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ reg_w(gspca_dev, index, value); @@ -940,6 +972,7 @@ static const struct usb_device_id device_table[] = { {USB_DEVICE(0x093a, 0x2624), .driver_info = FL_VFLIP}, {USB_DEVICE(0x093a, 0x2625)}, {USB_DEVICE(0x093a, 0x2626)}, + {USB_DEVICE(0x093a, 0x2627), .driver_info = FL_VFLIP}, {USB_DEVICE(0x093a, 0x2628)}, {USB_DEVICE(0x093a, 0x2629), .driver_info = FL_VFLIP}, {USB_DEVICE(0x093a, 0x262a)}, |
