diff options
Diffstat (limited to 'drivers/media/dvb')
56 files changed, 5718 insertions, 2653 deletions
diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig index 4983e1b1bb1d..01387f883cdf 100644 --- a/drivers/media/dvb/Kconfig +++ b/drivers/media/dvb/Kconfig @@ -27,9 +27,9 @@ source "drivers/media/dvb/ttpci/Kconfig" comment "Supported USB Adapters" depends on DVB_CORE && USB +source "drivers/media/dvb/dvb-usb/Kconfig" source "drivers/media/dvb/ttusb-budget/Kconfig" source "drivers/media/dvb/ttusb-dec/Kconfig" -source "drivers/media/dvb/dibusb/Kconfig" source "drivers/media/dvb/cinergyT2/Kconfig" comment "Supported FlexCopII (B2C2) Adapters" diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile index 520fc3902819..3c6ff1619103 100644 --- a/drivers/media/dvb/Makefile +++ b/drivers/media/dvb/Makefile @@ -2,4 +2,4 @@ # Makefile for the kernel multimedia device drivers. # -obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dibusb/ cinergyT2/ +obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ cinergyT2/ dvb-usb/ diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig index 99bd675df955..fafd0ab3a28f 100644 --- a/drivers/media/dvb/b2c2/Kconfig +++ b/drivers/media/dvb/b2c2/Kconfig @@ -6,6 +6,7 @@ config DVB_B2C2_FLEXCOP select DVB_MT312 select DVB_NXT2002 select DVB_STV0297 + select DVB_BCM3510 help Support for the digital TV receiver chip made by B2C2 Inc. included in Technisats PCI cards and USB boxes. diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index 71be400e9aeb..0410cc96a48e 100644 --- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -10,6 +10,7 @@ #include "stv0299.h" #include "mt352.h" #include "nxt2002.h" +#include "bcm3510.h" #include "stv0297.h" #include "mt312.h" @@ -285,21 +286,25 @@ static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_front } static struct mt352_config samsung_tdtc9251dh0_config = { - .demod_address = 0x0f, - .demod_init = samsung_tdtc9251dh0_demod_init, - .pll_set = samsung_tdtc9251dh0_pll_set, + .demod_init = samsung_tdtc9251dh0_demod_init, + .pll_set = samsung_tdtc9251dh0_pll_set, }; -static int nxt2002_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name) +static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name) { struct flexcop_device *fc = fe->dvb->priv; return request_firmware(fw, name, fc->dev); } static struct nxt2002_config samsung_tbmv_config = { - .demod_address = 0x0a, - .request_firmware = nxt2002_request_firmware, + .demod_address = 0x0a, + .request_firmware = flexcop_fe_request_firmware, +}; + +static struct bcm3510_config air2pc_atsc_first_gen_config = { + .demod_address = 0x0f, + .request_firmware = flexcop_fe_request_firmware, }; static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) @@ -354,11 +359,16 @@ int flexcop_frontend_init(struct flexcop_device *fc) fc->dev_type = FC_AIR_DVB; info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address); } else - /* try the air atsc (nxt2002) */ + /* try the air atsc 2nd generation (nxt2002) */ if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) { - fc->dev_type = FC_AIR_ATSC; + fc->dev_type = FC_AIR_ATSC2; info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address); } else + /* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */ + if ((fc->fe = bcm3510_attach(&air2pc_atsc_first_gen_config, &fc->i2c_adap)) != NULL) { + fc->dev_type = FC_AIR_ATSC1; + info("found the bcm3510 at i2c address: 0x%02x",air2pc_atsc_first_gen_config.demod_address); + } else /* try the cable dvb (stv0297) */ if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap, 0xf8)) != NULL) { fc->dev_type = FC_CABLE; diff --git a/drivers/media/dvb/b2c2/flexcop-misc.c b/drivers/media/dvb/b2c2/flexcop-misc.c index 19e06da46774..23082545651f 100644 --- a/drivers/media/dvb/b2c2/flexcop-misc.c +++ b/drivers/media/dvb/b2c2/flexcop-misc.c @@ -45,11 +45,12 @@ const char *flexcop_revision_names[] = { const char *flexcop_device_names[] = { "Unkown device", - "AirStar 2 DVB-T", - "AirStar 2 ATSC", - "SkyStar 2 DVB-S", - "SkyStar 2 DVB-S (old version)", - "CableStar 2 DVB-C", + "Air2PC/AirStar 2 DVB-T", + "Air2PC/AirStar 2 ATSC 1st generation", + "Air2PC/AirStar 2 ATSC 2nd generation", + "Sky2PC/SkyStar 2 DVB-S", + "Sky2PC/SkyStar 2 DVB-S (old version)", + "Cable2PC/CableStar 2 DVB-C", }; const char *flexcop_bus_names[] = { diff --git a/drivers/media/dvb/b2c2/flexcop-reg.h b/drivers/media/dvb/b2c2/flexcop-reg.h index 5e131be55cb3..75b50f21afe6 100644 --- a/drivers/media/dvb/b2c2/flexcop-reg.h +++ b/drivers/media/dvb/b2c2/flexcop-reg.h @@ -21,7 +21,8 @@ extern const char *flexcop_revision_names[]; typedef enum { FC_UNK = 0, FC_AIR_DVB, - FC_AIR_ATSC, + FC_AIR_ATSC1, + FC_AIR_ATSC2, FC_SKY, FC_SKY_OLD, FC_CABLE, diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c index d047e349d706..1339912c308b 100644 --- a/drivers/media/dvb/bt8xx/dst.c +++ b/drivers/media/dvb/bt8xx/dst.c @@ -906,22 +906,12 @@ static int dst_tone_power_cmd(struct dst_state* state) if (state->dst_type == DST_TYPE_IS_TERR) return 0; - if (state->voltage == SEC_VOLTAGE_OFF) - paket[4] = 0; - else - paket[4] = 1; - - if (state->tone == SEC_TONE_ON) - paket[2] = 0x02; - else - paket[2] = 0; - if (state->minicmd == SEC_MINI_A) - paket[3] = 0x02; - else - paket[3] = 0; - + paket[4] = state->tx_tuna[4]; + paket[2] = state->tx_tuna[2]; + paket[3] = state->tx_tuna[3]; paket[7] = dst_check_sum (paket, 7); dst_command(state, paket, 8); + return 0; } @@ -980,7 +970,7 @@ static int dst_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage); static int dst_write_tuna(struct dvb_frontend* fe) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; int retval; u8 reply; @@ -1048,10 +1038,10 @@ static int dst_write_tuna(struct dvb_frontend* fe) static int dst_set_diseqc(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; u8 paket[8] = { 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec }; - if (state->dst_type == DST_TYPE_IS_TERR) + if (state->dst_type != DST_TYPE_IS_SAT) return 0; if (cmd->msg_len == 0 || cmd->msg_len > 4) @@ -1064,39 +1054,32 @@ static int dst_set_diseqc(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* static int dst_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) { - u8 *val; int need_cmd; - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; state->voltage = voltage; - if (state->dst_type == DST_TYPE_IS_TERR) + if (state->dst_type != DST_TYPE_IS_SAT) return 0; need_cmd = 0; - val = &state->tx_tuna[0]; - val[8] &= ~0x40; switch (voltage) { - case SEC_VOLTAGE_13: - if ((state->diseq_flags & HAS_POWER) == 0) - need_cmd = 1; - state->diseq_flags |= HAS_POWER; - break; + case SEC_VOLTAGE_13: + case SEC_VOLTAGE_18: + if ((state->diseq_flags & HAS_POWER) == 0) + need_cmd = 1; + state->diseq_flags |= HAS_POWER; + state->tx_tuna[4] = 0x01; + break; - case SEC_VOLTAGE_18: - if ((state->diseq_flags & HAS_POWER) == 0) + case SEC_VOLTAGE_OFF: need_cmd = 1; - state->diseq_flags |= HAS_POWER; - val[8] |= 0x40; - break; - - case SEC_VOLTAGE_OFF: - need_cmd = 1; - state->diseq_flags &= ~(HAS_POWER | HAS_LOCK | ATTEMPT_TUNE); - break; + state->diseq_flags &= ~(HAS_POWER | HAS_LOCK | ATTEMPT_TUNE); + state->tx_tuna[4] = 0x00; + break; - default: - return -EINVAL; + default: + return -EINVAL; } if (need_cmd) dst_tone_power_cmd(state); @@ -1106,37 +1089,56 @@ static int dst_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) static int dst_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) { - u8 *val; - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; state->tone = tone; - if (state->dst_type == DST_TYPE_IS_TERR) + if (state->dst_type != DST_TYPE_IS_SAT) return 0; - val = &state->tx_tuna[0]; + switch (tone) { + case SEC_TONE_OFF: + state->tx_tuna[2] = 0xff; + break; - val[8] &= ~0x1; + case SEC_TONE_ON: + state->tx_tuna[2] = 0x02; + break; - switch (tone) { - case SEC_TONE_OFF: - break; + default: + return -EINVAL; + } + dst_tone_power_cmd(state); - case SEC_TONE_ON: - val[8] |= 1; - break; + return 0; +} - default: - return -EINVAL; +static int dst_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t minicmd) +{ + struct dst_state *state = fe->demodulator_priv; + + if (state->dst_type != DST_TYPE_IS_SAT) + return 0; + + state->minicmd = minicmd; + + switch (minicmd) { + case SEC_MINI_A: + state->tx_tuna[3] = 0x02; + break; + case SEC_MINI_B: + state->tx_tuna[3] = 0xff; + break; } dst_tone_power_cmd(state); return 0; } + static int dst_init(struct dvb_frontend* fe) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; static u8 ini_satci_tuna[] = { 9, 0, 3, 0xb6, 1, 0, 0x73, 0x21, 0, 0 }; static u8 ini_satfta_tuna[] = { 0, 0, 3, 0xb6, 1, 0x55, 0xbd, 0x50, 0, 0 }; static u8 ini_tvfta_tuna[] = { 0, 0, 3, 0xb6, 1, 7, 0x0, 0x0, 0, 0 }; @@ -1168,7 +1170,7 @@ static int dst_init(struct dvb_frontend* fe) static int dst_read_status(struct dvb_frontend* fe, fe_status_t* status) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; *status = 0; if (state->diseq_flags & HAS_LOCK) { @@ -1182,7 +1184,7 @@ static int dst_read_status(struct dvb_frontend* fe, fe_status_t* status) static int dst_read_signal_strength(struct dvb_frontend* fe, u16* strength) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; dst_get_signal(state); *strength = state->decode_strength; @@ -1192,7 +1194,7 @@ static int dst_read_signal_strength(struct dvb_frontend* fe, u16* strength) static int dst_read_snr(struct dvb_frontend* fe, u16* snr) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; dst_get_signal(state); *snr = state->decode_snr; @@ -1202,7 +1204,7 @@ static int dst_read_snr(struct dvb_frontend* fe, u16* snr) static int dst_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; dst_set_freq(state, p->frequency); if (verbose > 4) @@ -1228,7 +1230,7 @@ static int dst_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_paramet static int dst_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; p->frequency = state->decode_freq; p->inversion = state->inversion; @@ -1248,7 +1250,7 @@ static int dst_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_paramet static void dst_release(struct dvb_frontend* fe) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; kfree(state); } @@ -1346,7 +1348,7 @@ static struct dvb_frontend_ops dst_dvbs_ops = { .read_signal_strength = dst_read_signal_strength, .read_snr = dst_read_snr, - .diseqc_send_burst = dst_set_tone, + .diseqc_send_burst = dst_send_burst, .diseqc_send_master_cmd = dst_set_diseqc, .set_voltage = dst_set_voltage, .set_tone = dst_set_tone, diff --git a/drivers/media/dvb/dibusb/Kconfig b/drivers/media/dvb/dibusb/Kconfig deleted file mode 100644 index 74dfc73ae5b0..000000000000 --- a/drivers/media/dvb/dibusb/Kconfig +++ /dev/null @@ -1,62 +0,0 @@ -config DVB_DIBUSB - tristate "DiBcom USB DVB-T devices (see help for a complete device list)" - depends on DVB_CORE && USB - select FW_LOADER - select DVB_DIB3000MB - select DVB_DIB3000MC - select DVB_MT352 - help - Support for USB 1.1 and 2.0 DVB-T devices based on reference designs made by - DiBcom (http://www.dibcom.fr) and C&E. - - Devices supported by this driver: - - TwinhanDTV USB-Ter (VP7041) - TwinhanDTV Magic Box (VP7041e) - KWorld/JetWay/ADSTech V-Stream XPERT DTV - DVB-T USB1.1 and USB2.0 - Hama DVB-T USB-Box - DiBcom reference devices (non-public) - Ultima Electronic/Artec T1 USB TVBOX - Compro Videomate DVB-U2000 - DVB-T USB - Grandtec DVB-T USB - Avermedia AverTV DVBT USB - Artec T1 USB1.1 and USB2.0 boxes - Yakumo/Typhoon DVB-T USB2.0 - Hanftek UMT-010 USB2.0 - Hauppauge WinTV NOVA-T USB2 - - The VP7041 seems to be identical to "CTS Portable" (Chinese - Television System). - - These devices can be understood as budget ones, they "only" deliver - (a part of) the MPEG2 transport stream. - - A firmware is needed to get the device working. See Documentation/dvb/README.dibusb - details. - - Say Y if you own such a device and want to use it. You should build it as - a module. - -config DVB_DIBUSB_MISDESIGNED_DEVICES - bool "Enable support for some misdesigned (see help) devices, which identify with wrong IDs" - depends on DVB_DIBUSB - help - Somehow Artec/Ultima Electronic forgot to program the eeprom of some of their - USB1.1/USB2.0 devices. - So comes that they identify with the default Vendor and Product ID of the Cypress - CY7C64613 (AN2235) or Cypress FX2. - - Affected device IDs: - 0x0574:0x2235 (Artec T1 USB1.1, cold) - 0x04b4:0x8613 (Artec T1 USB2.0, cold) - 0x0574:0x1002 (Artec T1 USB2.0, warm) - 0x0574:0x2131 (aged DiBcom USB1.1 test device) - - Say Y if your device has one of the mentioned IDs. - -config DVB_DIBCOM_DEBUG - bool "Enable extended debug support for DiBcom USB device" - depends on DVB_DIBUSB - help - Say Y if you want to enable debuging. See modinfo dvb-dibusb for - debug levels. diff --git a/drivers/media/dvb/dibusb/Makefile b/drivers/media/dvb/dibusb/Makefile deleted file mode 100644 index e941c508624e..000000000000 --- a/drivers/media/dvb/dibusb/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -dvb-dibusb-objs = dvb-dibusb-core.o \ - dvb-dibusb-dvb.o \ - dvb-dibusb-fe-i2c.o \ - dvb-dibusb-firmware.o \ - dvb-dibusb-remote.o \ - dvb-dibusb-usb.o \ - dvb-fe-dtt200u.o - -obj-$(CONFIG_DVB_DIBUSB) += dvb-dibusb.o - -EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-core.c b/drivers/media/dvb/dibusb/dvb-dibusb-core.c deleted file mode 100644 index 26235f9247e4..000000000000 --- a/drivers/media/dvb/dibusb/dvb-dibusb-core.c +++ /dev/null @@ -1,558 +0,0 @@ -/* - * Driver for mobile USB Budget DVB-T devices based on reference - * design made by DiBcom (http://www.dibcom.fr/) - * - * dvb-dibusb-core.c - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * based on GPL code from DiBcom, which has - * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr) - * - * Remote control code added by David Matthews (dm@prolingua.co.uk) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation, version 2. - * - * Acknowledgements - * - * Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver - * sources, on which this driver (and the dib3000mb/mc/p frontends) are based. - * - * see Documentation/dvb/README.dibusb for more information - */ -#include "dvb-dibusb.h" - -#include <linux/moduleparam.h> - -/* debug */ -int dvb_dibusb_debug; -module_param_named(debug, dvb_dibusb_debug, int, 0644); - -#ifdef CONFIG_DVB_DIBCOM_DEBUG -#define DBSTATUS "" -#else -#define DBSTATUS " (debugging is not enabled)" -#endif -MODULE_PARM_DESC(debug, "set debugging level (1=info,2=xfer,4=alotmore,8=ts,16=err,32=rc (|-able))." DBSTATUS); -#undef DBSTATUS - -static int pid_parse; -module_param(pid_parse, int, 0644); -MODULE_PARM_DESC(pid_parse, "enable pid parsing (filtering) when running at USB2.0"); - -static int rc_query_interval = 100; -module_param(rc_query_interval, int, 0644); -MODULE_PARM_DESC(rc_query_interval, "interval in msecs for remote control query (default: 100; min: 40)"); - -static int rc_key_repeat_count = 2; -module_param(rc_key_repeat_count, int, 0644); -MODULE_PARM_DESC(rc_key_repeat_count, "how many key repeats will be dropped before passing the key event again (default: 2)"); - -/* Vendor IDs */ -#define USB_VID_ADSTECH 0x06e1 -#define USB_VID_ANCHOR 0x0547 -#define USB_VID_AVERMEDIA 0x14aa -#define USB_VID_COMPRO 0x185b -#define USB_VID_COMPRO_UNK 0x145f -#define USB_VID_CYPRESS 0x04b4 -#define USB_VID_DIBCOM 0x10b8 -#define USB_VID_EMPIA 0xeb1a -#define USB_VID_GRANDTEC 0x5032 -#define USB_VID_HANFTEK 0x15f4 -#define USB_VID_HAUPPAUGE 0x2040 -#define USB_VID_HYPER_PALTEK 0x1025 -#define USB_VID_IMC_NETWORKS 0x13d3 -#define USB_VID_TWINHAN 0x1822 -#define USB_VID_ULTIMA_ELECTRONIC 0x05d8 - -/* Product IDs */ -#define USB_PID_ADSTECH_USB2_COLD 0xa333 -#define USB_PID_ADSTECH_USB2_WARM 0xa334 -#define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 -#define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 -#define USB_PID_COMPRO_DVBU2000_COLD 0xd000 -#define USB_PID_COMPRO_DVBU2000_WARM 0xd001 -#define USB_PID_COMPRO_DVBU2000_UNK_COLD 0x010c -#define USB_PID_COMPRO_DVBU2000_UNK_WARM 0x010d -#define USB_PID_DIBCOM_MOD3000_COLD 0x0bb8 -#define USB_PID_DIBCOM_MOD3000_WARM 0x0bb9 -#define USB_PID_DIBCOM_MOD3001_COLD 0x0bc6 -#define USB_PID_DIBCOM_MOD3001_WARM 0x0bc7 -#define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131 -#define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0 -#define USB_PID_GRANDTEC_DVBT_USB_WARM 0x0fa1 -#define USB_PID_KWORLD_VSTREAM_COLD 0x17de -#define USB_PID_KWORLD_VSTREAM_WARM 0x17df -#define USB_PID_TWINHAN_VP7041_COLD 0x3201 -#define USB_PID_TWINHAN_VP7041_WARM 0x3202 -#define USB_PID_ULTIMA_TVBOX_COLD 0x8105 -#define USB_PID_ULTIMA_TVBOX_WARM 0x8106 -#define USB_PID_ULTIMA_TVBOX_AN2235_COLD 0x8107 -#define USB_PID_ULTIMA_TVBOX_AN2235_WARM 0x8108 -#define USB_PID_ULTIMA_TVBOX_ANCHOR_COLD 0x2235 -#define USB_PID_ULTIMA_TVBOX_USB2_COLD 0x8109 -#define USB_PID_ULTIMA_TVBOX_USB2_FX_COLD 0x8613 -#define USB_PID_ULTIMA_TVBOX_USB2_FX_WARM 0x1002 -#define USB_PID_UNK_HYPER_PALTEK_COLD 0x005e -#define USB_PID_UNK_HYPER_PALTEK_WARM 0x005f -#define USB_PID_HANFTEK_UMT_010_COLD 0x0001 -#define USB_PID_HANFTEK_UMT_010_WARM 0x0015 -#define USB_PID_YAKUMO_DTT200U_COLD 0x0201 -#define USB_PID_YAKUMO_DTT200U_WARM 0x0301 -#define USB_PID_WINTV_NOVA_T_USB2_COLD 0x9300 -#define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301 - -/* USB Driver stuff - * table of devices that this driver is working with - * - * ATTENTION: Never ever change the order of this table, the particular - * devices depend on this order - * - * Each entry is used as a reference in the device_struct. Currently this is - * the only non-redundant way of assigning USB ids to actual devices I'm aware - * of, because there is only one place in the code where the assignment of - * vendor and product id is done, here. - */ -static struct usb_device_id dib_table [] = { -/* 00 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_DVBT_USB_COLD)}, -/* 01 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_DVBT_USB_WARM)}, -/* 02 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_YAKUMO_DTT200U_COLD) }, -/* 03 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_YAKUMO_DTT200U_WARM) }, - -/* 04 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_COLD) }, -/* 05 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_WARM) }, -/* 06 */ { USB_DEVICE(USB_VID_COMPRO_UNK, USB_PID_COMPRO_DVBU2000_UNK_COLD) }, -/* 07 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_COLD) }, -/* 08 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_WARM) }, -/* 09 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3001_COLD) }, -/* 10 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3001_WARM) }, -/* 11 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_COLD) }, -/* 12 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_WARM) }, -/* 13 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_COLD) }, -/* 14 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_WARM) }, -/* 15 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_COLD) }, -/* 16 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_WARM) }, -/* 17 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_COLD) }, -/* 18 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_WARM) }, -/* 19 */ { USB_DEVICE(USB_VID_IMC_NETWORKS, USB_PID_TWINHAN_VP7041_COLD) }, -/* 20 */ { USB_DEVICE(USB_VID_IMC_NETWORKS, USB_PID_TWINHAN_VP7041_WARM) }, -/* 21 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_COLD) }, -/* 22 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_WARM) }, -/* 23 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_COLD) }, -/* 24 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_WARM) }, -/* 25 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_COLD) }, -/* 26 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_WARM) }, -/* 27 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_COLD) }, - -/* 28 */ { USB_DEVICE(USB_VID_HANFTEK, USB_PID_HANFTEK_UMT_010_COLD) }, -/* 29 */ { USB_DEVICE(USB_VID_HANFTEK, USB_PID_HANFTEK_UMT_010_WARM) }, - -/* 30 */ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_WINTV_NOVA_T_USB2_COLD) }, -/* 31 */ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_WINTV_NOVA_T_USB2_WARM) }, -/* 32 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_COLD) }, -/* 33 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_WARM) }, -/* - * activate the following define when you have one of the devices and want to - * build it from build-2.6 in dvb-kernel - */ -// #define CONFIG_DVB_DIBUSB_MISDESIGNED_DEVICES -#ifdef CONFIG_DVB_DIBUSB_MISDESIGNED_DEVICES -/* 34 */ { USB_DEVICE(USB_VID_ANCHOR, USB_PID_ULTIMA_TVBOX_ANCHOR_COLD) }, -/* 35 */ { USB_DEVICE(USB_VID_CYPRESS, USB_PID_ULTIMA_TVBOX_USB2_FX_COLD) }, -/* 36 */ { USB_DEVICE(USB_VID_ANCHOR, USB_PID_ULTIMA_TVBOX_USB2_FX_WARM) }, -/* 37 */ { USB_DEVICE(USB_VID_ANCHOR, USB_PID_DIBCOM_ANCHOR_2135_COLD) }, -#endif - { } /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE (usb, dib_table); - -static struct dibusb_usb_controller dibusb_usb_ctrl[] = { - { .name = "Cypress AN2135", .cpu_cs_register = 0x7f92 }, - { .name = "Cypress AN2235", .cpu_cs_register = 0x7f92 }, - { .name = "Cypress FX2", .cpu_cs_register = 0xe600 }, -}; - -struct dibusb_tuner dibusb_tuner[] = { - { DIBUSB_TUNER_CABLE_THOMSON, - 0x61 - }, - { DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5, - 0x60 - }, - { DIBUSB_TUNER_CABLE_LG_TDTP_E102P, - 0x61 - }, - { DIBUSB_TUNER_COFDM_PANASONIC_ENV77H11D5, - 0x60 - }, -}; - -static struct dibusb_demod dibusb_demod[] = { - { DIBUSB_DIB3000MB, - 16, - { 0x8, 0 }, - }, - { DIBUSB_DIB3000MC, - 32, - { 0x9, 0xa, 0xb, 0xc }, - }, - { DIBUSB_MT352, - 254, - { 0xf, 0 }, - }, - { DTT200U_FE, - 8, - { 0xff,0 }, /* there is no i2c bus in this device */ - } -}; - -static struct dibusb_device_class dibusb_device_classes[] = { - { .id = DIBUSB1_1, .usb_ctrl = &dibusb_usb_ctrl[0], - .firmware = "dvb-dibusb-5.0.0.11.fw", - .pipe_cmd = 0x01, .pipe_data = 0x02, - .urb_count = 7, .urb_buffer_size = 4096, - DIBUSB_RC_NEC_PROTOCOL, - &dibusb_demod[DIBUSB_DIB3000MB], - &dibusb_tuner[DIBUSB_TUNER_CABLE_THOMSON], - }, - { DIBUSB1_1_AN2235, &dibusb_usb_ctrl[1], - "dvb-dibusb-an2235-1.fw", - 0x01, 0x02, - 7, 4096, - DIBUSB_RC_NEC_PROTOCOL, - &dibusb_demod[DIBUSB_DIB3000MB], - &dibusb_tuner[DIBUSB_TUNER_CABLE_THOMSON], - }, - { DIBUSB2_0,&dibusb_usb_ctrl[2], - "dvb-dibusb-6.0.0.5.fw", - 0x01, 0x06, - 7, 4096, - DIBUSB_RC_NEC_PROTOCOL, - &dibusb_demod[DIBUSB_DIB3000MC], - &dibusb_tuner[DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5], - }, - { UMT2_0, &dibusb_usb_ctrl[2], - "dvb-dibusb-umt-2.fw", - 0x01, 0x06, - 20, 512, - DIBUSB_RC_NO, - &dibusb_demod[DIBUSB_MT352], - &dibusb_tuner[DIBUSB_TUNER_CABLE_LG_TDTP_E102P], - }, - { DIBUSB2_0B,&dibusb_usb_ctrl[2], - "dvb-dibusb-adstech-usb2-1.fw", - 0x01, 0x06, - 7, 4096, - DIBUSB_RC_NEC_PROTOCOL, - &dibusb_demod[DIBUSB_DIB3000MB], - &dibusb_tuner[DIBUSB_TUNER_CABLE_THOMSON], - }, - { NOVAT_USB2,&dibusb_usb_ctrl[2], - "dvb-dibusb-nova-t-1.fw", - 0x01, 0x06, - 7, 4096, - DIBUSB_RC_HAUPPAUGE_PROTO, - &dibusb_demod[DIBUSB_DIB3000MC], - &dibusb_tuner[DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5], - }, - { DTT200U,&dibusb_usb_ctrl[2], - "dvb-dtt200u-1.fw", - 0x01, 0x02, - 7, 4096, - DIBUSB_RC_NO, - &dibusb_demod[DTT200U_FE], - NULL, /* no explicit tuner/pll-programming necessary (it has the ENV57H1XD5) */ - }, -}; - -static struct dibusb_usb_device dibusb_devices[] = { - { "TwinhanDTV USB1.1 / Magic Box / HAMA USB1.1 DVB-T device", - &dibusb_device_classes[DIBUSB1_1], - { &dib_table[19], &dib_table[21], NULL}, - { &dib_table[20], &dib_table[22], NULL}, - }, - { "KWorld V-Stream XPERT DTV - DVB-T USB1.1", - &dibusb_device_classes[DIBUSB1_1], - { &dib_table[11], NULL }, - { &dib_table[12], NULL }, - }, - { "Grandtec USB1.1 DVB-T", - &dibusb_device_classes[DIBUSB1_1], - { &dib_table[13], &dib_table[15], NULL }, - { &dib_table[14], &dib_table[16], NULL }, - }, - { "DiBcom USB1.1 DVB-T reference design (MOD3000)", - &dibusb_device_classes[DIBUSB1_1], - { &dib_table[7], NULL }, - { &dib_table[8], NULL }, - }, - { "Artec T1 USB1.1 TVBOX with AN2135", - &dibusb_device_classes[DIBUSB1_1], - { &dib_table[23], NULL }, - { &dib_table[24], NULL }, - }, - { "Artec T1 USB1.1 TVBOX with AN2235", - &dibusb_device_classes[DIBUSB1_1_AN2235], - { &dib_table[25], NULL }, - { &dib_table[26], NULL }, - }, - { "Avermedia AverTV DVBT USB1.1", - &dibusb_device_classes[DIBUSB1_1], - { &dib_table[0], NULL }, - { &dib_table[1], NULL }, - }, - { "Compro Videomate DVB-U2000 - DVB-T USB1.1 (please confirm to linux-dvb)", - &dibusb_device_classes[DIBUSB1_1], - { &dib_table[4], &dib_table[6], NULL}, - { &dib_table[5], NULL }, - }, - { "Unkown USB1.1 DVB-T device ???? please report the name to the author", - &dibusb_device_classes[DIBUSB1_1], - { &dib_table[17], NULL }, - { &dib_table[18], NULL }, - }, - { "DiBcom USB2.0 DVB-T reference design (MOD3000P)", - &dibusb_device_classes[DIBUSB2_0], - { &dib_table[9], NULL }, - { &dib_table[10], NULL }, - }, - { "Artec T1 USB2.0 TVBOX (please report the warm ID)", - &dibusb_device_classes[DIBUSB2_0], - { &dib_table[27], NULL }, - { NULL }, - }, - { "Hauppauge WinTV NOVA-T USB2", - &dibusb_device_classes[NOVAT_USB2], - { &dib_table[30], NULL }, - { &dib_table[31], NULL }, - }, - { "DTT200U (Yakumo/Hama/Typhoon) DVB-T USB2.0", - &dibusb_device_classes[DTT200U], - { &dib_table[2], NULL }, - { &dib_table[3], NULL }, - }, - { "Hanftek UMT-010 DVB-T USB2.0", - &dibusb_device_classes[UMT2_0], - { &dib_table[28], NULL }, - { &dib_table[29], NULL }, - }, - { "KWorld/ADSTech Instant DVB-T USB 2.0", - &dibusb_device_classes[DIBUSB2_0B], - { &dib_table[32], NULL }, - { &dib_table[33], NULL }, /* device ID with default DIBUSB2_0-firmware */ - }, -#ifdef CONFIG_DVB_DIBUSB_MISDESIGNED_DEVICES - { "Artec T1 USB1.1 TVBOX with AN2235 (misdesigned)", - &dibusb_device_classes[DIBUSB1_1_AN2235], - { &dib_table[34], NULL }, - { NULL }, - }, - { "Artec T1 USB2.0 TVBOX with FX2 IDs (misdesigned, please report the warm ID)", - &dibusb_device_classes[DTT200U], - { &dib_table[35], NULL }, - { &dib_table[36], NULL }, /* undefined, it could be that the device will get another USB ID in warm state */ - }, - { "DiBcom USB1.1 DVB-T reference design (MOD3000) with AN2135 default IDs", - &dibusb_device_classes[DIBUSB1_1], - { &dib_table[37], NULL }, - { NULL }, - }, -#endif -}; - -static int dibusb_exit(struct usb_dibusb *dib) -{ - deb_info("init_state before exiting everything: %x\n",dib->init_state); - dibusb_remote_exit(dib); - dibusb_fe_exit(dib); - dibusb_i2c_exit(dib); - dibusb_dvb_exit(dib); - dibusb_urb_exit(dib); - deb_info("init_state should be zero now: %x\n",dib->init_state); - dib->init_state = DIBUSB_STATE_INIT; - kfree(dib); - return 0; -} - -static int dibusb_init(struct usb_dibusb *dib) -{ - int ret = 0; - sema_init(&dib->usb_sem, 1); - sema_init(&dib->i2c_sem, 1); - - dib->init_state = DIBUSB_STATE_INIT; - - if ((ret = dibusb_urb_init(dib)) || - (ret = dibusb_dvb_init(dib)) || - (ret = dibusb_i2c_init(dib))) { - dibusb_exit(dib); - return ret; - } - - if ((ret = dibusb_fe_init(dib))) - err("could not initialize a frontend."); - - if ((ret = dibusb_remote_init(dib))) - err("could not initialize remote control."); - - return 0; -} - -static struct dibusb_usb_device * dibusb_device_class_quirk(struct usb_device *udev, struct dibusb_usb_device *dev) -{ - int i; - - /* Quirk for the Kworld/ADSTech Instant USB2.0 device. It has the same USB - * IDs like the USB1.1 KWorld after loading the firmware. Which is a bad - * idea and make this quirk necessary. - */ - if (dev->dev_cl->id == DIBUSB1_1 && udev->speed == USB_SPEED_HIGH) { - info("this seems to be the Kworld/ADSTech Instant USB2.0 device or equal."); - for (i = 0; i < sizeof(dibusb_devices)/sizeof(struct dibusb_usb_device); i++) { - if (dibusb_devices[i].dev_cl->id == DIBUSB2_0B) { - dev = &dibusb_devices[i]; - break; - } - } - } - - return dev; -} - -static struct dibusb_usb_device * dibusb_find_device (struct usb_device *udev,int *cold) -{ - int i,j; - struct dibusb_usb_device *dev = NULL; - *cold = -1; - - for (i = 0; i < sizeof(dibusb_devices)/sizeof(struct dibusb_usb_device); i++) { - for (j = 0; j < DIBUSB_ID_MAX_NUM && dibusb_devices[i].cold_ids[j] != NULL; j++) { - deb_info("check for cold %x %x\n",dibusb_devices[i].cold_ids[j]->idVendor, dibusb_devices[i].cold_ids[j]->idProduct); - if (dibusb_devices[i].cold_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) && - dibusb_devices[i].cold_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) { - *cold = 1; - dev = &dibusb_devices[i]; - break; - } - } - - if (dev != NULL) - break; - - for (j = 0; j < DIBUSB_ID_MAX_NUM && dibusb_devices[i].warm_ids[j] != NULL; j++) { - deb_info("check for warm %x %x\n",dibusb_devices[i].warm_ids[j]->idVendor, dibusb_devices[i].warm_ids[j]->idProduct); - if (dibusb_devices[i].warm_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) && - dibusb_devices[i].warm_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) { - *cold = 0; - dev = &dibusb_devices[i]; - break; - } - } - } - - if (dev != NULL) - dev = dibusb_device_class_quirk(udev,dev); - - return dev; -} - -/* - * USB - */ -static int dibusb_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *udev = interface_to_usbdev(intf); - struct usb_dibusb *dib = NULL; - struct dibusb_usb_device *dibdev = NULL; - - int ret = -ENOMEM,cold=0; - - if ((dibdev = dibusb_find_device(udev,&cold)) == NULL) { - err("something went very wrong, " - "unknown product ID: %.4x",le16_to_cpu(udev->descriptor.idProduct)); - return -ENODEV; - } - - if (cold == 1) { - info("found a '%s' in cold state, will try to load a firmware",dibdev->name); - ret = dibusb_loadfirmware(udev,dibdev); - } else { - info("found a '%s' in warm state.",dibdev->name); - dib = kmalloc(sizeof(struct usb_dibusb),GFP_KERNEL); - if (dib == NULL) { - err("no memory"); - return ret; - } - memset(dib,0,sizeof(struct usb_dibusb)); - - dib->udev = udev; - dib->dibdev = dibdev; - - /* store parameters to structures */ - dib->rc_query_interval = rc_query_interval; - dib->pid_parse = pid_parse; - dib->rc_key_repeat_count = rc_key_repeat_count; - - usb_set_intfdata(intf, dib); - - ret = dibusb_init(dib); - } - - if (ret == 0) - info("%s successfully initialized and connected.",dibdev->name); - else - info("%s error while loading driver (%d)",dibdev->name,ret); - return ret; -} - -static void dibusb_disconnect(struct usb_interface *intf) -{ - struct usb_dibusb *dib = usb_get_intfdata(intf); - const char *name = DRIVER_DESC; - - usb_set_intfdata(intf,NULL); - if (dib != NULL && dib->dibdev != NULL) { - name = dib->dibdev->name; - dibusb_exit(dib); - } - info("%s successfully deinitialized and disconnected.",name); - -} - -/* usb specific object needed to register this driver with the usb subsystem */ -static struct usb_driver dibusb_driver = { - .owner = THIS_MODULE, - .name = DRIVER_DESC, - .probe = dibusb_probe, - .disconnect = dibusb_disconnect, - .id_table = dib_table, -}; - -/* module stuff */ -static int __init usb_dibusb_init(void) -{ - int result; - if ((result = usb_register(&dibusb_driver))) { - err("usb_register failed. Error number %d",result); - return result; - } - - return 0; -} - -static void __exit usb_dibusb_exit(void) -{ - /* deregister this driver from the USB subsystem */ - usb_deregister(&dibusb_driver); -} - -module_init (usb_dibusb_init); -module_exit (usb_dibusb_exit); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-dvb.c b/drivers/media/dvb/dibusb/dvb-dibusb-dvb.c deleted file mode 100644 index 400b439e804e..000000000000 --- a/drivers/media/dvb/dibusb/dvb-dibusb-dvb.c +++ /dev/null @@ -1,185 +0,0 @@ -/* - * dvb-dibusb-dvb.c is part of the driver for mobile USB Budget DVB-T devices - * based on reference design made by DiBcom (http://www.dibcom.fr/) - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * see dvb-dibusb-core.c for more copyright details. - * - * This file contains functions for initializing and handling the - * linux-dvb API. - */ -#include "dvb-dibusb.h" - -#include <linux/usb.h> -#include <linux/version.h> - -static u32 urb_compl_count; - -/* - * MPEG2 TS DVB stuff - */ -void dibusb_urb_complete(struct urb *urb, struct pt_regs *ptregs) -{ - struct usb_dibusb *dib = urb->context; - - deb_ts("urb complete feedcount: %d, status: %d, length: %d\n",dib->feedcount,urb->status, - urb->actual_length); - - urb_compl_count++; - if (urb_compl_count % 1000 == 0) - deb_info("%d urbs completed so far.\n",urb_compl_count); - - switch (urb->status) { - case 0: /* success */ - case -ETIMEDOUT: /* NAK */ - break; - case -ECONNRESET: /* kill */ - case -ENOENT: - case -ESHUTDOWN: - return; - default: /* error */ - deb_ts("urb completition error %d.", urb->status); - break; - } - - if (dib->feedcount > 0 && urb->actual_length > 0) { - if (dib->init_state & DIBUSB_STATE_DVB) - dvb_dmx_swfilter(&dib->demux, (u8*) urb->transfer_buffer,urb->actual_length); - } else - deb_ts("URB dropped because of feedcount.\n"); - - usb_submit_urb(urb,GFP_ATOMIC); -} - -static int dibusb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, int onoff) -{ - struct usb_dibusb *dib = dvbdmxfeed->demux->priv; - int newfeedcount; - - if (dib == NULL) - return -ENODEV; - - newfeedcount = dib->feedcount + (onoff ? 1 : -1); - - /* - * stop feed before setting a new pid if there will be no pid anymore - */ - if (newfeedcount == 0) { - deb_ts("stop feeding\n"); - if (dib->xfer_ops.fifo_ctrl != NULL) { - if (dib->xfer_ops.fifo_ctrl(dib->fe,0)) { - err("error while inhibiting fifo."); - return -ENODEV; - } - } - dibusb_streaming(dib,0); - } - - dib->feedcount = newfeedcount; - - /* activate the pid on the device specific pid_filter */ - deb_ts("setting pid: %5d %04x at index %d '%s'\n",dvbdmxfeed->pid,dvbdmxfeed->pid,dvbdmxfeed->index,onoff ? "on" : "off"); - if (dib->pid_parse && dib->xfer_ops.pid_ctrl != NULL) - dib->xfer_ops.pid_ctrl(dib->fe,dvbdmxfeed->index,dvbdmxfeed->pid,onoff); - - /* - * start the feed if this was the first pid to set and there is still a pid - * for reception. - */ - if (dib->feedcount == onoff && dib->feedcount > 0) { - - deb_ts("controlling pid parser\n"); - if (dib->xfer_ops.pid_parse != NULL) { - if (dib->xfer_ops.pid_parse(dib->fe,dib->pid_parse) < 0) { - err("could not handle pid_parser"); - } - } - - deb_ts("start feeding\n"); - if (dib->xfer_ops.fifo_ctrl != NULL) { - if (dib->xfer_ops.fifo_ctrl(dib->fe,1)) { - err("error while enabling fifo."); - return -ENODEV; - } - } - dibusb_streaming(dib,1); - } - return 0; -} - -static int dibusb_start_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - deb_ts("start pid: 0x%04x, feedtype: %d\n", dvbdmxfeed->pid,dvbdmxfeed->type); - return dibusb_ctrl_feed(dvbdmxfeed,1); -} - -static int dibusb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - deb_ts("stop pid: 0x%04x, feedtype: %d\n", dvbdmxfeed->pid, dvbdmxfeed->type); - return dibusb_ctrl_feed(dvbdmxfeed,0); -} - -int dibusb_dvb_init(struct usb_dibusb *dib) -{ - int ret; - - urb_compl_count = 0; - - if ((ret = dvb_register_adapter(&dib->adapter, DRIVER_DESC, - THIS_MODULE)) < 0) { - deb_info("dvb_register_adapter failed: error %d", ret); - goto err; - } - dib->adapter.priv = dib; - -/* i2c is done in dibusb_i2c_init */ - - dib->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING; - - dib->demux.priv = (void *)dib; - /* get pidcount from demod */ - dib->demux.feednum = dib->demux.filternum = 255; - dib->demux.start_feed = dibusb_start_feed; - dib->demux.stop_feed = dibusb_stop_feed; - dib->demux.write_to_decoder = NULL; - if ((ret = dvb_dmx_init(&dib->demux)) < 0) { - err("dvb_dmx_init failed: error %d",ret); - goto err_dmx; - } - - dib->dmxdev.filternum = dib->demux.filternum; - dib->dmxdev.demux = &dib->demux.dmx; - dib->dmxdev.capabilities = 0; - if ((ret = dvb_dmxdev_init(&dib->dmxdev, &dib->adapter)) < 0) { - err("dvb_dmxdev_init failed: error %d",ret); - goto err_dmx_dev; - } - - dvb_net_init(&dib->adapter, &dib->dvb_net, &dib->demux.dmx); - - goto success; -err_dmx_dev: - dvb_dmx_release(&dib->demux); -err_dmx: - dvb_unregister_adapter(&dib->adapter); -err: - return ret; -success: - dib->init_state |= DIBUSB_STATE_DVB; - return 0; -} - -int dibusb_dvb_exit(struct usb_dibusb *dib) -{ - if (dib->init_state & DIBUSB_STATE_DVB) { - dib->init_state &= ~DIBUSB_STATE_DVB; - deb_info("unregistering DVB part\n"); - dvb_net_release(&dib->dvb_net); - dib->demux.dmx.close(&dib->demux.dmx); - dvb_dmxdev_release(&dib->dmxdev); - dvb_dmx_release(&dib->demux); - dvb_unregister_adapter(&dib->adapter); - } - return 0; -} diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c b/drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c deleted file mode 100644 index 5a71b88797d9..000000000000 --- a/drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c +++ /dev/null @@ -1,582 +0,0 @@ -/* - * dvb-dibusb-fe-i2c.c is part of the driver for mobile USB Budget DVB-T devices - * based on reference design made by DiBcom (http://www.dibcom.fr/) - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * see dvb-dibusb-core.c for more copyright details. - * - * This file contains functions for attaching, initializing of an appropriate - * demodulator/frontend. I2C-stuff is also located here. - * - */ -#include "dvb-dibusb.h" - -#include <linux/usb.h> - -static int dibusb_i2c_msg(struct usb_dibusb *dib, u8 addr, - u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) -{ - u8 sndbuf[wlen+4]; /* lead(1) devaddr,direction(1) addr(2) data(wlen) (len(2) (when reading)) */ - /* write only ? */ - int wo = (rbuf == NULL || rlen == 0), - len = 2 + wlen + (wo ? 0 : 2); - - sndbuf[0] = wo ? DIBUSB_REQ_I2C_WRITE : DIBUSB_REQ_I2C_READ; - sndbuf[1] = (addr << 1) | (wo ? 0 : 1); - - memcpy(&sndbuf[2],wbuf,wlen); - - if (!wo) { - sndbuf[wlen+2] = (rlen >> 8) & 0xff; - sndbuf[wlen+3] = rlen & 0xff; - } - - return dibusb_readwrite_usb(dib,sndbuf,len,rbuf,rlen); -} - -/* - * I2C master xfer function - */ -static int dibusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg *msg,int num) -{ - struct usb_dibusb *dib = i2c_get_adapdata(adap); - int i; - - if (down_interruptible(&dib->i2c_sem) < 0) - return -EAGAIN; - - if (num > 2) - warn("more than 2 i2c messages at a time is not handled yet. TODO."); - - for (i = 0; i < num; i++) { - /* write/read request */ - if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { - if (dibusb_i2c_msg(dib, msg[i].addr, msg[i].buf,msg[i].len, - msg[i+1].buf,msg[i+1].len) < 0) - break; - i++; - } else - if (dibusb_i2c_msg(dib, msg[i].addr, msg[i].buf,msg[i].len,NULL,0) < 0) - break; - } - - up(&dib->i2c_sem); - return i; -} - -static u32 dibusb_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm dibusb_algo = { - .name = "DiBcom USB i2c algorithm", - .id = I2C_ALGO_BIT, - .master_xfer = dibusb_i2c_xfer, - .functionality = dibusb_i2c_func, -}; - -static int dibusb_general_demod_init(struct dvb_frontend *fe); -static u8 dibusb_general_pll_addr(struct dvb_frontend *fe); -static int dibusb_general_pll_init(struct dvb_frontend *fe, u8 pll_buf[5]); -static int dibusb_general_pll_set(struct dvb_frontend *fe, - struct dvb_frontend_parameters* params, u8 pll_buf[5]); - -static struct mt352_config mt352_hanftek_umt_010_config = { - .demod_address = 0x1e, - .demod_init = dibusb_general_demod_init, - .pll_set = dibusb_general_pll_set, -}; - -static int dibusb_tuner_quirk(struct usb_dibusb *dib) -{ - switch (dib->dibdev->dev_cl->id) { - case DIBUSB1_1: /* some these device have the ENV77H11D5 and some the THOMSON CABLE */ - case DIBUSB1_1_AN2235: { /* actually its this device, but in warm state they are indistinguishable */ - struct dibusb_tuner *t; - u8 b[2] = { 0,0 } ,b2[1]; - struct i2c_msg msg[2] = { - { .flags = 0, .buf = b, .len = 2 }, - { .flags = I2C_M_RD, .buf = b2, .len = 1}, - }; - - t = &dibusb_tuner[DIBUSB_TUNER_COFDM_PANASONIC_ENV77H11D5]; - - msg[0].addr = msg[1].addr = t->pll_addr; - - if (dib->xfer_ops.tuner_pass_ctrl != NULL) - dib->xfer_ops.tuner_pass_ctrl(dib->fe,1,t->pll_addr); - dibusb_i2c_xfer(&dib->i2c_adap,msg,2); - if (dib->xfer_ops.tuner_pass_ctrl != NULL) - dib->xfer_ops.tuner_pass_ctrl(dib->fe,0,t->pll_addr); - - if (b2[0] == 0xfe) - info("this device has the Thomson Cable onboard. Which is default."); - else { - dib->tuner = t; - info("this device has the Panasonic ENV77H11D5 onboard."); - } - break; - } - default: - break; - } - return 0; -} - -int dibusb_fe_init(struct usb_dibusb* dib) -{ - struct dib3000_config demod_cfg; - int i; - - if (dib->init_state & DIBUSB_STATE_I2C) { - for (i = 0; i < sizeof(dib->dibdev->dev_cl->demod->i2c_addrs) / sizeof(unsigned char) && - dib->dibdev->dev_cl->demod->i2c_addrs[i] != 0; i++) { - - demod_cfg.demod_address = dib->dibdev->dev_cl->demod->i2c_addrs[i]; - demod_cfg.pll_addr = dibusb_general_pll_addr; - demod_cfg.pll_set = dibusb_general_pll_set; - demod_cfg.pll_init = dibusb_general_pll_init; - - deb_info("demod id: %d %d\n",dib->dibdev->dev_cl->demod->id,DTT200U_FE); - - switch (dib->dibdev->dev_cl->demod->id) { - case DIBUSB_DIB3000MB: - dib->fe = dib3000mb_attach(&demod_cfg,&dib->i2c_adap,&dib->xfer_ops); - break; - case DIBUSB_DIB3000MC: - dib->fe = dib3000mc_attach(&demod_cfg,&dib->i2c_adap,&dib->xfer_ops); - break; - case DIBUSB_MT352: - mt352_hanftek_umt_010_config.demod_address = dib->dibdev->dev_cl->demod->i2c_addrs[i]; - dib->fe = mt352_attach(&mt352_hanftek_umt_010_config, &dib->i2c_adap); - break; - case DTT200U_FE: - dib->fe = dtt200u_fe_attach(dib,&dib->xfer_ops); - break; - } - if (dib->fe != NULL) { - info("found demodulator at i2c address 0x%x",dib->dibdev->dev_cl->demod->i2c_addrs[i]); - break; - } - } - /* if a frontend was found */ - if (dib->fe != NULL) { - if (dib->fe->ops->sleep != NULL) - dib->fe_sleep = dib->fe->ops->sleep; - dib->fe->ops->sleep = dibusb_hw_sleep; - - if (dib->fe->ops->init != NULL ) - dib->fe_init = dib->fe->ops->init; - dib->fe->ops->init = dibusb_hw_wakeup; - - /* setting the default tuner */ - dib->tuner = dib->dibdev->dev_cl->tuner; - - /* check which tuner is mounted on this device, in case this is unsure */ - dibusb_tuner_quirk(dib); - } - } - if (dib->fe == NULL) { - err("A frontend driver was not found for device '%s'.", - dib->dibdev->name); - return -ENODEV; - } else { - if (dvb_register_frontend(&dib->adapter, dib->fe)) { - err("Frontend registration failed."); - if (dib->fe->ops->release) - dib->fe->ops->release(dib->fe); - dib->fe = NULL; - return -ENODEV; - } - } - - return 0; -} - -int dibusb_fe_exit(struct usb_dibusb *dib) -{ - if (dib->fe != NULL) - dvb_unregister_frontend(dib->fe); - return 0; -} - -int dibusb_i2c_init(struct usb_dibusb *dib) -{ - int ret = 0; - - dib->adapter.priv = dib; - - strncpy(dib->i2c_adap.name,dib->dibdev->name,I2C_NAME_SIZE); -#ifdef I2C_ADAP_CLASS_TV_DIGITAL - dib->i2c_adap.class = I2C_ADAP_CLASS_TV_DIGITAL, -#else - dib->i2c_adap.class = I2C_CLASS_TV_DIGITAL, -#endif - dib->i2c_adap.algo = &dibusb_algo; - dib->i2c_adap.algo_data = NULL; - dib->i2c_adap.id = I2C_ALGO_BIT; - - i2c_set_adapdata(&dib->i2c_adap, dib); - - if ((ret = i2c_add_adapter(&dib->i2c_adap)) < 0) - err("could not add i2c adapter"); - - dib->init_state |= DIBUSB_STATE_I2C; - - return ret; -} - -int dibusb_i2c_exit(struct usb_dibusb *dib) -{ - if (dib->init_state & DIBUSB_STATE_I2C) - i2c_del_adapter(&dib->i2c_adap); - dib->init_state &= ~DIBUSB_STATE_I2C; - return 0; -} - - -/* pll stuff, maybe removed soon (thx to Gerd/Andrew in advance) */ -static int thomson_cable_eu_pll_set(struct dvb_frontend_parameters *fep, u8 pllbuf[4]) -{ - u32 tfreq = (fep->frequency + 36125000) / 62500; - int vu,p0,p1,p2; - - if (fep->frequency > 403250000) - vu = 1, p2 = 1, p1 = 0, p0 = 1; - else if (fep->frequency > 115750000) - vu = 0, p2 = 1, p1 = 1, p0 = 0; - else if (fep->frequency > 44250000) - vu = 0, p2 = 0, p1 = 1, p0 = 1; - else - return -EINVAL; - - pllbuf[0] = (tfreq >> 8) & 0x7f; - pllbuf[1] = tfreq & 0xff; - pllbuf[2] = 0x8e; - pllbuf[3] = (vu << 7) | (p2 << 2) | (p1 << 1) | p0; - return 0; -} - -static int panasonic_cofdm_env57h1xd5_pll_set(struct dvb_frontend_parameters *fep, u8 pllbuf[4]) -{ - u32 freq_khz = fep->frequency / 1000; - u32 tfreq = ((freq_khz + 36125)*6 + 500) / 1000; - u8 TA, T210, R210, ctrl1, cp210, p4321; - if (freq_khz > 858000) { - err("frequency cannot be larger than 858 MHz."); - return -EINVAL; - } - - // contol data 1 : 1 | T/A=1 | T2,T1,T0 = 0,0,0 | R2,R1,R0 = 0,1,0 - TA = 1; - T210 = 0; - R210 = 0x2; - ctrl1 = (1 << 7) | (TA << 6) | (T210 << 3) | R210; - -// ******** CHARGE PUMP CONFIG vs RF FREQUENCIES ***************** - if (freq_khz < 470000) - cp210 = 2; // VHF Low and High band ch E12 to E4 to E12 - else if (freq_khz < 526000) - cp210 = 4; // UHF band Ch E21 to E27 - else // if (freq < 862000000) - cp210 = 5; // UHF band ch E28 to E69 - -//********************* BW select ******************************* - if (freq_khz < 153000) - p4321 = 1; // BW selected for VHF low - else if (freq_khz < 470000) - p4321 = 2; // BW selected for VHF high E5 to E12 - else // if (freq < 862000000) - p4321 = 4; // BW selection for UHF E21 to E69 - - pllbuf[0] = (tfreq >> 8) & 0xff; - pllbuf[1] = (tfreq >> 0) & 0xff; - pllbuf[2] = 0xff & ctrl1; - pllbuf[3] = (cp210 << 5) | (p4321); - - return 0; -} - -/* - * 7 6 5 4 3 2 1 0 - * Address Byte 1 1 0 0 0 MA1 MA0 R/~W=0 - * - * Program divider byte 1 0 n14 n13 n12 n11 n10 n9 n8 - * Program divider byte 2 n7 n6 n5 n4 n3 n2 n1 n0 - * - * Control byte 1 1 T/A=1 T2 T1 T0 R2 R1 R0 - * 1 T/A=0 0 0 ATC AL2 AL1 AL0 - * - * Control byte 2 CP2 CP1 CP0 BS5 BS4 BS3 BS2 BS1 - * - * MA0/1 = programmable address bits - * R/~W = read/write bit (0 for writing) - * N14-0 = programmable LO frequency - * - * T/A = test AGC bit (0 = next 6 bits AGC setting, - * 1 = next 6 bits test and reference divider ratio settings) - * T2-0 = test bits - * R2-0 = reference divider ratio and programmable frequency step - * ATC = AGC current setting and time constant - * ATC = 0: AGC current = 220nA, AGC time constant = 2s - * ATC = 1: AGC current = 9uA, AGC time constant = 50ms - * AL2-0 = AGC take-over point bits - * CP2-0 = charge pump current - * BS5-1 = PMOS ports control bits; - * BSn = 0 corresponding port is off, high-impedance state (at power-on) - * BSn = 1 corresponding port is on - */ -static int panasonic_cofdm_env77h11d5_tda6650_init(struct dvb_frontend *fe, u8 pllbuf[4]) -{ - pllbuf[0] = 0x0b; - pllbuf[1] = 0xf5; - pllbuf[2] = 0x85; - pllbuf[3] = 0xab; - return 0; -} - -static int panasonic_cofdm_env77h11d5_tda6650_set (struct dvb_frontend_parameters *fep,u8 pllbuf[4]) -{ - int tuner_frequency = 0; - u8 band, cp, filter; - - // determine charge pump - tuner_frequency = fep->frequency + 36166000; - if (tuner_frequency < 87000000) - return -EINVAL; - else if (tuner_frequency < 130000000) - cp = 3; - else if (tuner_frequency < 160000000) - cp = 5; - else if (tuner_frequency < 200000000) - cp = 6; - else if (tuner_frequency < 290000000) - cp = 3; - else if (tuner_frequency < 420000000) - cp = 5; - else if (tuner_frequency < 480000000) - cp = 6; - else if (tuner_frequency < 620000000) - cp = 3; - else if (tuner_frequency < 830000000) - cp = 5; - else if (tuner_frequency < 895000000) - cp = 7; - else - return -EINVAL; - - // determine band - if (fep->frequency < 49000000) - return -EINVAL; - else if (fep->frequency < 161000000) - band = 1; - else if (fep->frequency < 444000000) - band = 2; - else if (fep->frequency < 861000000) - band = 4; - else - return -EINVAL; - - // setup PLL filter - switch (fep->u.ofdm.bandwidth) { - case BANDWIDTH_6_MHZ: - case BANDWIDTH_7_MHZ: - filter = 0; - break; - case BANDWIDTH_8_MHZ: - filter = 1; - break; - default: - return -EINVAL; - } - - // calculate divisor - // ((36166000+((1000000/6)/2)) + Finput)/(1000000/6) - tuner_frequency = (((fep->frequency / 1000) * 6) + 217496) / 1000; - - // setup tuner buffer - pllbuf[0] = (tuner_frequency >> 8) & 0x7f; - pllbuf[1] = tuner_frequency & 0xff; - pllbuf[2] = 0xca; - pllbuf[3] = (cp << 5) | (filter << 3) | band; - return 0; -} - -/* - * 7 6 5 4 3 2 1 0 - * Address Byte 1 1 0 0 0 MA1 MA0 R/~W=0 - * - * Program divider byte 1 0 n14 n13 n12 n11 n10 n9 n8 - * Program divider byte 2 n7 n6 n5 n4 n3 n2 n1 n0 - * - * Control byte 1 CP T2 T1 T0 RSA RSB OS - * - * Band Switch byte X X X P4 P3 P2 P1 P0 - * - * Auxiliary byte ATC AL2 AL1 AL0 0 0 0 0 - * - * Address: MA1 MA0 Address - * 0 0 c0 - * 0 1 c2 (always valid) - * 1 0 c4 - * 1 1 c6 - */ -static int lg_tdtp_e102p_tua6034(struct dvb_frontend_parameters* fep, u8 pllbuf[4]) -{ - u32 div; - u8 p210, p3; - -#define TUNER_MUL 62500 - - div = (fep->frequency + 36125000 + TUNER_MUL / 2) / TUNER_MUL; -// div = ((fep->frequency/1000 + 36166) * 6) / 1000; - - if (fep->frequency < 174500000) - p210 = 1; // not supported by the tdtp_e102p - else if (fep->frequency < 230000000) // VHF - p210 = 2; - else - p210 = 4; - - if (fep->u.ofdm.bandwidth == BANDWIDTH_7_MHZ) - p3 = 0; - else - p3 = 1; - - pllbuf[0] = (div >> 8) & 0x7f; - pllbuf[1] = div & 0xff; - pllbuf[2] = 0xce; -// pllbuf[2] = 0xcc; - pllbuf[3] = (p3 << 3) | p210; - - return 0; -} - -static int lg_tdtp_e102p_mt352_demod_init(struct dvb_frontend *fe) -{ - static u8 mt352_clock_config[] = { 0x89, 0xb8, 0x2d }; - static u8 mt352_reset[] = { 0x50, 0x80 }; - static u8 mt352_mclk_ratio[] = { 0x8b, 0x00 }; - static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0x40 }; - static u8 mt352_agc_cfg[] = { 0x67, 0x10, 0xa0 }; - - static u8 mt352_sec_agc_cfg1[] = { 0x6a, 0xff }; - static u8 mt352_sec_agc_cfg2[] = { 0x6d, 0xff }; - static u8 mt352_sec_agc_cfg3[] = { 0x70, 0x40 }; - static u8 mt352_sec_agc_cfg4[] = { 0x7b, 0x03 }; - static u8 mt352_sec_agc_cfg5[] = { 0x7d, 0x0f }; - - static u8 mt352_acq_ctl[] = { 0x53, 0x50 }; - static u8 mt352_input_freq_1[] = { 0x56, 0x31, 0x06 }; - - mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); - udelay(2000); - mt352_write(fe, mt352_reset, sizeof(mt352_reset)); - mt352_write(fe, mt352_mclk_ratio, sizeof(mt352_mclk_ratio)); - - mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); - mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); - - mt352_write(fe, mt352_sec_agc_cfg1, sizeof(mt352_sec_agc_cfg1)); - mt352_write(fe, mt352_sec_agc_cfg2, sizeof(mt352_sec_agc_cfg2)); - mt352_write(fe, mt352_sec_agc_cfg3, sizeof(mt352_sec_agc_cfg3)); - mt352_write(fe, mt352_sec_agc_cfg4, sizeof(mt352_sec_agc_cfg4)); - mt352_write(fe, mt352_sec_agc_cfg5, sizeof(mt352_sec_agc_cfg5)); - - mt352_write(fe, mt352_acq_ctl, sizeof(mt352_acq_ctl)); - mt352_write(fe, mt352_input_freq_1, sizeof(mt352_input_freq_1)); - - return 0; -} - -static int dibusb_general_demod_init(struct dvb_frontend *fe) -{ - struct usb_dibusb* dib = (struct usb_dibusb*) fe->dvb->priv; - switch (dib->dibdev->dev_cl->id) { - case UMT2_0: - return lg_tdtp_e102p_mt352_demod_init(fe); - default: /* other device classes do not have device specific demod inits */ - break; - } - return 0; -} - -static u8 dibusb_general_pll_addr(struct dvb_frontend *fe) -{ - struct usb_dibusb* dib = (struct usb_dibusb*) fe->dvb->priv; - return dib->tuner->pll_addr; -} - -static int dibusb_pll_i2c_helper(struct usb_dibusb *dib, u8 pll_buf[5], u8 buf[4]) -{ - if (pll_buf == NULL) { - struct i2c_msg msg = { - .addr = dib->tuner->pll_addr, - .flags = 0, - .buf = buf, - .len = sizeof(buf) - }; - if (i2c_transfer (&dib->i2c_adap, &msg, 1) != 1) - return -EIO; - msleep(1); - } else { - pll_buf[0] = dib->tuner->pll_addr << 1; - memcpy(&pll_buf[1],buf,4); - } - - return 0; -} - -static int dibusb_general_pll_init(struct dvb_frontend *fe, - u8 pll_buf[5]) -{ - struct usb_dibusb* dib = (struct usb_dibusb*) fe->dvb->priv; - u8 buf[4]; - int ret=0; - switch (dib->tuner->id) { - case DIBUSB_TUNER_COFDM_PANASONIC_ENV77H11D5: - ret = panasonic_cofdm_env77h11d5_tda6650_init(fe,buf); - break; - default: - break; - } - - if (ret) - return ret; - - return dibusb_pll_i2c_helper(dib,pll_buf,buf); -} - -static int dibusb_general_pll_set(struct dvb_frontend *fe, - struct dvb_frontend_parameters *fep, u8 pll_buf[5]) -{ - struct usb_dibusb* dib = (struct usb_dibusb*) fe->dvb->priv; - u8 buf[4]; - int ret=0; - - switch (dib->tuner->id) { - case DIBUSB_TUNER_CABLE_THOMSON: - ret = thomson_cable_eu_pll_set(fep, buf); - break; - case DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5: - ret = panasonic_cofdm_env57h1xd5_pll_set(fep, buf); - break; - case DIBUSB_TUNER_CABLE_LG_TDTP_E102P: - ret = lg_tdtp_e102p_tua6034(fep, buf); - break; - case DIBUSB_TUNER_COFDM_PANASONIC_ENV77H11D5: - ret = panasonic_cofdm_env77h11d5_tda6650_set(fep,buf); - break; - default: - warn("no pll programming routine found for tuner %d.\n",dib->tuner->id); - ret = -ENODEV; - break; - } - - if (ret) - return ret; - - return dibusb_pll_i2c_helper(dib,pll_buf,buf); -} diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-firmware.c b/drivers/media/dvb/dibusb/dvb-dibusb-firmware.c deleted file mode 100644 index 504ba47afdf3..000000000000 --- a/drivers/media/dvb/dibusb/dvb-dibusb-firmware.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * dvb-dibusb-firmware.c is part of the driver for mobile USB Budget DVB-T devices - * based on reference design made by DiBcom (http://www.dibcom.fr/) - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * see dvb-dibusb-core.c for more copyright details. - * - * This file contains functions for downloading the firmware to the device. - */ -#include "dvb-dibusb.h" - -#include <linux/firmware.h> -#include <linux/usb.h> - -/* - * load a firmware packet to the device - */ -static int dibusb_writemem(struct usb_device *udev,u16 addr,u8 *data, u8 len) -{ - return usb_control_msg(udev, usb_sndctrlpipe(udev,0), - 0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len, 5000); -} - -int dibusb_loadfirmware(struct usb_device *udev, struct dibusb_usb_device *dibdev) -{ - const struct firmware *fw = NULL; - u16 addr; - u8 *b,*p; - int ret = 0,i; - - if ((ret = request_firmware(&fw, dibdev->dev_cl->firmware, &udev->dev)) != 0) { - err("did not find the firmware file. (%s) " - "Please see linux/Documentation/dvb/ for more details on firmware-problems.", - dibdev->dev_cl->firmware); - return ret; - } - - info("downloading firmware from file '%s'.",dibdev->dev_cl->firmware); - - p = kmalloc(fw->size,GFP_KERNEL); - if (p != NULL) { - u8 reset; - /* - * you cannot use the fw->data as buffer for - * usb_control_msg, a new buffer has to be - * created - */ - memcpy(p,fw->data,fw->size); - - /* stop the CPU */ - reset = 1; - if ((ret = dibusb_writemem(udev,dibdev->dev_cl->usb_ctrl->cpu_cs_register,&reset,1)) != 1) - err("could not stop the USB controller CPU."); - for(i = 0; p[i+3] == 0 && i < fw->size; ) { - b = (u8 *) &p[i]; - addr = *((u16 *) &b[1]); - - ret = dibusb_writemem(udev,addr,&b[4],b[0]); - - if (ret != b[0]) { - err("error while transferring firmware " - "(transferred size: %d, block size: %d)", - ret,b[0]); - ret = -EINVAL; - break; - } - i += 5 + b[0]; - } - /* length in ret */ - if (ret > 0) - ret = 0; - /* restart the CPU */ - reset = 0; - if (ret || dibusb_writemem(udev,dibdev->dev_cl->usb_ctrl->cpu_cs_register,&reset,1) != 1) { - err("could not restart the USB controller CPU."); - ret = -EINVAL; - } - - kfree(p); - } else { - ret = -ENOMEM; - } - release_firmware(fw); - - return ret; -} diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-remote.c b/drivers/media/dvb/dibusb/dvb-dibusb-remote.c deleted file mode 100644 index 9dc8b15517b7..000000000000 --- a/drivers/media/dvb/dibusb/dvb-dibusb-remote.c +++ /dev/null @@ -1,316 +0,0 @@ -/* - * dvb-dibusb-remote.c is part of the driver for mobile USB Budget DVB-T devices - * based on reference design made by DiBcom (http://www.dibcom.fr/) - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * see dvb-dibusb-core.c for more copyright details. - * - * This file contains functions for handling the event device on the software - * side and the remote control on the hardware side. - */ -#include "dvb-dibusb.h" - -/* Table to map raw key codes to key events. This should not be hard-wired - into the kernel. */ -static const struct { u8 c0, c1, c2; uint32_t key; } nec_rc_keys [] = -{ - /* Key codes for the little Artec T1/Twinhan/HAMA/ remote. */ - { 0x00, 0xff, 0x16, KEY_POWER }, - { 0x00, 0xff, 0x10, KEY_MUTE }, - { 0x00, 0xff, 0x03, KEY_1 }, - { 0x00, 0xff, 0x01, KEY_2 }, - { 0x00, 0xff, 0x06, KEY_3 }, - { 0x00, 0xff, 0x09, KEY_4 }, - { 0x00, 0xff, 0x1d, KEY_5 }, - { 0x00, 0xff, 0x1f, KEY_6 }, - { 0x00, 0xff, 0x0d, KEY_7 }, - { 0x00, 0xff, 0x19, KEY_8 }, - { 0x00, 0xff, 0x1b, KEY_9 }, - { 0x00, 0xff, 0x15, KEY_0 }, - { 0x00, 0xff, 0x05, KEY_CHANNELUP }, - { 0x00, 0xff, 0x02, KEY_CHANNELDOWN }, - { 0x00, 0xff, 0x1e, KEY_VOLUMEUP }, - { 0x00, 0xff, 0x0a, KEY_VOLUMEDOWN }, - { 0x00, 0xff, 0x11, KEY_RECORD }, - { 0x00, 0xff, 0x17, KEY_FAVORITES }, /* Heart symbol - Channel list. */ - { 0x00, 0xff, 0x14, KEY_PLAY }, - { 0x00, 0xff, 0x1a, KEY_STOP }, - { 0x00, 0xff, 0x40, KEY_REWIND }, - { 0x00, 0xff, 0x12, KEY_FASTFORWARD }, - { 0x00, 0xff, 0x0e, KEY_PREVIOUS }, /* Recall - Previous channel. */ - { 0x00, 0xff, 0x4c, KEY_PAUSE }, - { 0x00, 0xff, 0x4d, KEY_SCREEN }, /* Full screen mode. */ - { 0x00, 0xff, 0x54, KEY_AUDIO }, /* MTS - Switch to secondary audio. */ - /* additional keys TwinHan VisionPlus, the Artec seemingly not have */ - { 0x00, 0xff, 0x0c, KEY_CANCEL }, /* Cancel */ - { 0x00, 0xff, 0x1c, KEY_EPG }, /* EPG */ - { 0x00, 0xff, 0x00, KEY_TAB }, /* Tab */ - { 0x00, 0xff, 0x48, KEY_INFO }, /* Preview */ - { 0x00, 0xff, 0x04, KEY_LIST }, /* RecordList */ - { 0x00, 0xff, 0x0f, KEY_TEXT }, /* Teletext */ - /* Key codes for the KWorld/ADSTech/JetWay remote. */ - { 0x86, 0x6b, 0x12, KEY_POWER }, - { 0x86, 0x6b, 0x0f, KEY_SELECT }, /* source */ - { 0x86, 0x6b, 0x0c, KEY_UNKNOWN }, /* scan */ - { 0x86, 0x6b, 0x0b, KEY_EPG }, - { 0x86, 0x6b, 0x10, KEY_MUTE }, - { 0x86, 0x6b, 0x01, KEY_1 }, - { 0x86, 0x6b, 0x02, KEY_2 }, - { 0x86, 0x6b, 0x03, KEY_3 }, - { 0x86, 0x6b, 0x04, KEY_4 }, - { 0x86, 0x6b, 0x05, KEY_5 }, - { 0x86, 0x6b, 0x06, KEY_6 }, - { 0x86, 0x6b, 0x07, KEY_7 }, - { 0x86, 0x6b, 0x08, KEY_8 }, - { 0x86, 0x6b, 0x09, KEY_9 }, - { 0x86, 0x6b, 0x0a, KEY_0 }, - { 0x86, 0x6b, 0x18, KEY_ZOOM }, - { 0x86, 0x6b, 0x1c, KEY_UNKNOWN }, /* preview */ - { 0x86, 0x6b, 0x13, KEY_UNKNOWN }, /* snap */ - { 0x86, 0x6b, 0x00, KEY_UNDO }, - { 0x86, 0x6b, 0x1d, KEY_RECORD }, - { 0x86, 0x6b, 0x0d, KEY_STOP }, - { 0x86, 0x6b, 0x0e, KEY_PAUSE }, - { 0x86, 0x6b, 0x16, KEY_PLAY }, - { 0x86, 0x6b, 0x11, KEY_BACK }, - { 0x86, 0x6b, 0x19, KEY_FORWARD }, - { 0x86, 0x6b, 0x14, KEY_UNKNOWN }, /* pip */ - { 0x86, 0x6b, 0x15, KEY_ESC }, - { 0x86, 0x6b, 0x1a, KEY_UP }, - { 0x86, 0x6b, 0x1e, KEY_DOWN }, - { 0x86, 0x6b, 0x1f, KEY_LEFT }, - { 0x86, 0x6b, 0x1b, KEY_RIGHT }, -}; - -/* Hauppauge NOVA-T USB2 keys */ -static const struct { u16 raw; uint32_t key; } haupp_rc_keys [] = { - { 0xddf, KEY_GOTO }, - { 0xdef, KEY_POWER }, - { 0xce7, KEY_TV }, - { 0xcc7, KEY_VIDEO }, - { 0xccf, KEY_AUDIO }, - { 0xcd7, KEY_MEDIA }, - { 0xcdf, KEY_EPG }, - { 0xca7, KEY_UP }, - { 0xc67, KEY_RADIO }, - { 0xcb7, KEY_LEFT }, - { 0xd2f, KEY_OK }, - { 0xcbf, KEY_RIGHT }, - { 0xcff, KEY_BACK }, - { 0xcaf, KEY_DOWN }, - { 0xc6f, KEY_MENU }, - { 0xc87, KEY_VOLUMEUP }, - { 0xc8f, KEY_VOLUMEDOWN }, - { 0xc97, KEY_CHANNEL }, - { 0xc7f, KEY_MUTE }, - { 0xd07, KEY_CHANNELUP }, - { 0xd0f, KEY_CHANNELDOWN }, - { 0xdbf, KEY_RECORD }, - { 0xdb7, KEY_STOP }, - { 0xd97, KEY_REWIND }, - { 0xdaf, KEY_PLAY }, - { 0xda7, KEY_FASTFORWARD }, - { 0xd27, KEY_LAST }, /* Skip backwards */ - { 0xd87, KEY_PAUSE }, - { 0xcf7, KEY_NEXT }, - { 0xc07, KEY_0 }, - { 0xc0f, KEY_1 }, - { 0xc17, KEY_2 }, - { 0xc1f, KEY_3 }, - { 0xc27, KEY_4 }, - { 0xc2f, KEY_5 }, - { 0xc37, KEY_6 }, - { 0xc3f, KEY_7 }, - { 0xc47, KEY_8 }, - { 0xc4f, KEY_9 }, - { 0xc57, KEY_KPASTERISK }, - { 0xc77, KEY_GRAVE }, /* # */ - { 0xc5f, KEY_RED }, - { 0xd77, KEY_GREEN }, - { 0xdc7, KEY_YELLOW }, - { 0xd4f, KEY_BLUE}, -}; - -static int dibusb_key2event_nec(struct usb_dibusb *dib,u8 rb[5]) -{ - int i; - switch (rb[0]) { - case DIBUSB_RC_NEC_KEY_PRESSED: - /* rb[1-3] is the actual key, rb[4] is a checksum */ - deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x, 0x%02x\n", - rb[1], rb[2], rb[3], rb[4]); - - if ((0xff - rb[3]) != rb[4]) { - deb_rc("remote control checksum failed.\n"); - break; - } - - /* See if we can match the raw key code. */ - for (i = 0; i < sizeof(nec_rc_keys)/sizeof(nec_rc_keys[0]); i++) { - if (nec_rc_keys[i].c0 == rb[1] && - nec_rc_keys[i].c1 == rb[2] && - nec_rc_keys[i].c2 == rb[3]) { - - dib->last_event = nec_rc_keys[i].key; - return 1; - } - } - break; - case DIBUSB_RC_NEC_KEY_REPEATED: - /* rb[1]..rb[4] are always zero.*/ - /* Repeats often seem to occur so for the moment just ignore this. */ - return 0; - case DIBUSB_RC_NEC_EMPTY: /* No (more) remote control keys. */ - default: - break; - } - return -1; -} - -static int dibusb_key2event_hauppauge(struct usb_dibusb *dib,u8 rb[4]) -{ - u16 raw; - int i,state; - switch (rb[0]) { - case DIBUSB_RC_HAUPPAUGE_KEY_PRESSED: - raw = ((rb[1] & 0x0f) << 8) | rb[2]; - - state = !!(rb[1] & 0x40); - - deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to %04x state: %d\n",rb[1],rb[2],rb[3],raw,state); - for (i = 0; i < sizeof(haupp_rc_keys)/sizeof(haupp_rc_keys[0]); i++) { - if (haupp_rc_keys[i].raw == raw) { - if (dib->last_event == haupp_rc_keys[i].key && - dib->last_state == state) { - deb_rc("key repeat\n"); - return 0; - } else { - dib->last_event = haupp_rc_keys[i].key; - dib->last_state = state; - return 1; - } - } - } - - break; - case DIBUSB_RC_HAUPPAUGE_KEY_EMPTY: - default: - break; - } - return -1; -} - -/* - * Read the remote control and feed the appropriate event. - * NEC protocol is used for remote controls - */ -static int dibusb_read_remote_control(struct usb_dibusb *dib) -{ - u8 b[1] = { DIBUSB_REQ_POLL_REMOTE }, rb[5]; - int ret,event = 0; - - if ((ret = dibusb_readwrite_usb(dib,b,1,rb,5))) - return ret; - - switch (dib->dibdev->dev_cl->remote_type) { - case DIBUSB_RC_NEC_PROTOCOL: - event = dibusb_key2event_nec(dib,rb); - break; - case DIBUSB_RC_HAUPPAUGE_PROTO: - event = dibusb_key2event_hauppauge(dib,rb); - default: - break; - } - - /* key repeat */ - if (event == 0) - if (++dib->repeat_key_count < dib->rc_key_repeat_count) { - deb_rc("key repeat dropped. (%d)\n",dib->repeat_key_count); - event = -1; /* skip this key repeat */ - } - - if (event == 1 || event == 0) { - deb_rc("Translated key 0x%04x\n",event); - - /* Signal down and up events for this key. */ - input_report_key(&dib->rc_input_dev, dib->last_event, 1); - input_report_key(&dib->rc_input_dev, dib->last_event, 0); - input_sync(&dib->rc_input_dev); - - if (event == 1) - dib->repeat_key_count = 0; - } - return 0; -} - -/* Remote-control poll function - called every dib->rc_query_interval ms to see - whether the remote control has received anything. */ -static void dibusb_remote_query(void *data) -{ - struct usb_dibusb *dib = (struct usb_dibusb *) data; - /* TODO: need a lock here. We can simply skip checking for the remote control - if we're busy. */ - dibusb_read_remote_control(dib); - schedule_delayed_work(&dib->rc_query_work, - msecs_to_jiffies(dib->rc_query_interval)); -} - -int dibusb_remote_init(struct usb_dibusb *dib) -{ - int i; - - if (dib->dibdev->dev_cl->remote_type == DIBUSB_RC_NO) - return 0; - - /* Initialise the remote-control structures.*/ - init_input_dev(&dib->rc_input_dev); - - dib->rc_input_dev.evbit[0] = BIT(EV_KEY); - dib->rc_input_dev.keycodesize = sizeof(unsigned char); - dib->rc_input_dev.keycodemax = KEY_MAX; - dib->rc_input_dev.name = DRIVER_DESC " remote control"; - - switch (dib->dibdev->dev_cl->remote_type) { - case DIBUSB_RC_NEC_PROTOCOL: - for (i=0; i<sizeof(nec_rc_keys)/sizeof(nec_rc_keys[0]); i++) - set_bit(nec_rc_keys[i].key, dib->rc_input_dev.keybit); - break; - case DIBUSB_RC_HAUPPAUGE_PROTO: - for (i=0; i<sizeof(haupp_rc_keys)/sizeof(haupp_rc_keys[0]); i++) - set_bit(haupp_rc_keys[i].key, dib->rc_input_dev.keybit); - break; - default: - break; - } - - - input_register_device(&dib->rc_input_dev); - - INIT_WORK(&dib->rc_query_work, dibusb_remote_query, dib); - - /* Start the remote-control polling. */ - if (dib->rc_query_interval < 40) - dib->rc_query_interval = 100; /* default */ - - info("schedule remote query interval to %d msecs.",dib->rc_query_interval); - schedule_delayed_work(&dib->rc_query_work,msecs_to_jiffies(dib->rc_query_interval)); - - dib->init_state |= DIBUSB_STATE_REMOTE; - - return 0; -} - -int dibusb_remote_exit(struct usb_dibusb *dib) -{ - if (dib->dibdev->dev_cl->remote_type == DIBUSB_RC_NO) - return 0; - - if (dib->init_state & DIBUSB_STATE_REMOTE) { - cancel_delayed_work(&dib->rc_query_work); - flush_scheduled_work(); - input_unregister_device(&dib->rc_input_dev); - } - dib->init_state &= ~DIBUSB_STATE_REMOTE; - return 0; -} diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-usb.c b/drivers/media/dvb/dibusb/dvb-dibusb-usb.c deleted file mode 100644 index 642f0596a5ba..000000000000 --- a/drivers/media/dvb/dibusb/dvb-dibusb-usb.c +++ /dev/null @@ -1,303 +0,0 @@ -/* - * dvb-dibusb-usb.c is part of the driver for mobile USB Budget DVB-T devices - * based on reference design made by DiBcom (http://www.dibcom.fr/) - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * see dvb-dibusb-core.c for more copyright details. - * - * This file contains functions for initializing and handling the - * usb specific stuff. - */ -#include "dvb-dibusb.h" - -#include <linux/version.h> -#include <linux/pci.h> - -int dibusb_readwrite_usb(struct usb_dibusb *dib, u8 *wbuf, u16 wlen, u8 *rbuf, - u16 rlen) -{ - int actlen,ret = -ENOMEM; - - if (wbuf == NULL || wlen == 0) - return -EINVAL; - - if ((ret = down_interruptible(&dib->usb_sem))) - return ret; - - debug_dump(wbuf,wlen); - - ret = usb_bulk_msg(dib->udev,usb_sndbulkpipe(dib->udev, - dib->dibdev->dev_cl->pipe_cmd), wbuf,wlen,&actlen, - DIBUSB_I2C_TIMEOUT); - - if (ret) - err("bulk message failed: %d (%d/%d)",ret,wlen,actlen); - else - ret = actlen != wlen ? -1 : 0; - - /* an answer is expected, and no error before */ - if (!ret && rbuf && rlen) { - ret = usb_bulk_msg(dib->udev,usb_rcvbulkpipe(dib->udev, - dib->dibdev->dev_cl->pipe_cmd),rbuf,rlen,&actlen, - DIBUSB_I2C_TIMEOUT); - - if (ret) - err("recv bulk message failed: %d",ret); - else { - deb_alot("rlen: %d\n",rlen); - debug_dump(rbuf,actlen); - } - } - - up(&dib->usb_sem); - return ret; -} - -/* - * Cypress controls - */ -int dibusb_write_usb(struct usb_dibusb *dib, u8 *buf, u16 len) -{ - return dibusb_readwrite_usb(dib,buf,len,NULL,0); -} - -#if 0 -/* - * #if 0'ing the following functions as they are not in use _now_, - * but probably will be sometime. - */ -/* - * do not use this, just a workaround for a bug, - * which will hopefully never occur :). - */ -int dibusb_interrupt_read_loop(struct usb_dibusb *dib) -{ - u8 b[1] = { DIBUSB_REQ_INTR_READ }; - return dibusb_write_usb(dib,b,1); -} -#endif - -/* - * ioctl for the firmware - */ -static int dibusb_ioctl_cmd(struct usb_dibusb *dib, u8 cmd, u8 *param, int plen) -{ - u8 b[34]; - int size = plen > 32 ? 32 : plen; - memset(b,0,34); - b[0] = DIBUSB_REQ_SET_IOCTL; - b[1] = cmd; - - if (size > 0) - memcpy(&b[2],param,size); - - return dibusb_write_usb(dib,b,34); //2+size); -} - -/* - * ioctl for power control - */ -int dibusb_hw_wakeup(struct dvb_frontend *fe) -{ - struct usb_dibusb *dib = (struct usb_dibusb *) fe->dvb->priv; - u8 b[1] = { DIBUSB_IOCTL_POWER_WAKEUP }; - deb_info("dibusb-device is getting up.\n"); - - switch (dib->dibdev->dev_cl->id) { - case DTT200U: - break; - default: - dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_POWER_MODE, b,1); - break; - } - - if (dib->fe_init) - return dib->fe_init(fe); - - return 0; -} - -int dibusb_hw_sleep(struct dvb_frontend *fe) -{ - struct usb_dibusb *dib = (struct usb_dibusb *) fe->dvb->priv; - u8 b[1] = { DIBUSB_IOCTL_POWER_SLEEP }; - deb_info("dibusb-device is going to bed.\n"); - /* workaround, something is wrong, when dibusb 1.1 device are going to bed too late */ - switch (dib->dibdev->dev_cl->id) { - case DIBUSB1_1: - case NOVAT_USB2: - case DTT200U: - break; - default: - dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_POWER_MODE, b,1); - break; - } - if (dib->fe_sleep) - return dib->fe_sleep(fe); - - return 0; -} - -int dibusb_set_streaming_mode(struct usb_dibusb *dib,u8 mode) -{ - u8 b[2] = { DIBUSB_REQ_SET_STREAMING_MODE, mode }; - return dibusb_readwrite_usb(dib,b,2,NULL,0); -} - -static int dibusb_urb_kill(struct usb_dibusb *dib) -{ - int i; -deb_info("trying to kill urbs\n"); - if (dib->init_state & DIBUSB_STATE_URB_SUBMIT) { - for (i = 0; i < dib->dibdev->dev_cl->urb_count; i++) { - deb_info("killing URB no. %d.\n",i); - - /* stop the URB */ - usb_kill_urb(dib->urb_list[i]); - } - } else - deb_info(" URBs not killed.\n"); - dib->init_state &= ~DIBUSB_STATE_URB_SUBMIT; - return 0; -} - -static int dibusb_urb_submit(struct usb_dibusb *dib) -{ - int i,ret; - if (dib->init_state & DIBUSB_STATE_URB_INIT) { - for (i = 0; i < dib->dibdev->dev_cl->urb_count; i++) { - deb_info("submitting URB no. %d\n",i); - if ((ret = usb_submit_urb(dib->urb_list[i],GFP_ATOMIC))) { - err("could not submit buffer urb no. %d - get them all back\n",i); - dibusb_urb_kill(dib); - return ret; - } - dib->init_state |= DIBUSB_STATE_URB_SUBMIT; - } - } - return 0; -} - -int dibusb_streaming(struct usb_dibusb *dib,int onoff) -{ - if (onoff) - dibusb_urb_submit(dib); - else - dibusb_urb_kill(dib); - - switch (dib->dibdev->dev_cl->id) { - case DIBUSB2_0: - case DIBUSB2_0B: - case NOVAT_USB2: - case UMT2_0: - if (onoff) - return dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_ENABLE_STREAM,NULL,0); - else - return dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_DISABLE_STREAM,NULL,0); - break; - default: - break; - } - return 0; -} - -int dibusb_urb_init(struct usb_dibusb *dib) -{ - int i,bufsize,def_pid_parse = 1; - - /* - * when reloading the driver w/o replugging the device - * a timeout occures, this helps - */ - usb_clear_halt(dib->udev,usb_sndbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_cmd)); - usb_clear_halt(dib->udev,usb_rcvbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_cmd)); - usb_clear_halt(dib->udev,usb_rcvbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_data)); - - /* allocate the array for the data transfer URBs */ - dib->urb_list = kmalloc(dib->dibdev->dev_cl->urb_count*sizeof(struct urb *),GFP_KERNEL); - if (dib->urb_list == NULL) - return -ENOMEM; - memset(dib->urb_list,0,dib->dibdev->dev_cl->urb_count*sizeof(struct urb *)); - - dib->init_state |= DIBUSB_STATE_URB_LIST; - - bufsize = dib->dibdev->dev_cl->urb_count*dib->dibdev->dev_cl->urb_buffer_size; - deb_info("allocate %d bytes as buffersize for all URBs\n",bufsize); - /* allocate the actual buffer for the URBs */ - if ((dib->buffer = pci_alloc_consistent(NULL,bufsize,&dib->dma_handle)) == NULL) { - deb_info("not enough memory.\n"); - return -ENOMEM; - } - deb_info("allocation complete\n"); - memset(dib->buffer,0,bufsize); - - dib->init_state |= DIBUSB_STATE_URB_BUF; - - /* allocate and submit the URBs */ - for (i = 0; i < dib->dibdev->dev_cl->urb_count; i++) { - if (!(dib->urb_list[i] = usb_alloc_urb(0,GFP_ATOMIC))) { - return -ENOMEM; - } - - usb_fill_bulk_urb( dib->urb_list[i], dib->udev, - usb_rcvbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_data), - &dib->buffer[i*dib->dibdev->dev_cl->urb_buffer_size], - dib->dibdev->dev_cl->urb_buffer_size, - dibusb_urb_complete, dib); - - dib->urb_list[i]->transfer_flags = 0; - - dib->init_state |= DIBUSB_STATE_URB_INIT; - } - - /* dib->pid_parse here contains the value of the module parameter */ - /* decide if pid parsing can be deactivated: - * is possible (by device type) and wanted (by user) - */ - switch (dib->dibdev->dev_cl->id) { - case DIBUSB2_0: - case DIBUSB2_0B: - if (dib->udev->speed == USB_SPEED_HIGH && !dib->pid_parse) { - def_pid_parse = 0; - info("running at HIGH speed, will deliver the complete TS."); - } else - info("will use pid_parsing."); - break; - default: - break; - } - /* from here on it contains the device and user decision */ - dib->pid_parse = def_pid_parse; - - return 0; -} - -int dibusb_urb_exit(struct usb_dibusb *dib) -{ - int i; - - dibusb_urb_kill(dib); - - if (dib->init_state & DIBUSB_STATE_URB_LIST) { - for (i = 0; i < dib->dibdev->dev_cl->urb_count; i++) { - if (dib->urb_list[i] != NULL) { - deb_info("freeing URB no. %d.\n",i); - /* free the URBs */ - usb_free_urb(dib->urb_list[i]); - } - } - /* free the urb array */ - kfree(dib->urb_list); - dib->init_state &= ~DIBUSB_STATE_URB_LIST; - } - - if (dib->init_state & DIBUSB_STATE_URB_BUF) - pci_free_consistent(NULL, - dib->dibdev->dev_cl->urb_buffer_size*dib->dibdev->dev_cl->urb_count, - dib->buffer,dib->dma_handle); - - dib->init_state &= ~DIBUSB_STATE_URB_BUF; - dib->init_state &= ~DIBUSB_STATE_URB_INIT; - return 0; -} diff --git a/drivers/media/dvb/dibusb/dvb-dibusb.h b/drivers/media/dvb/dibusb/dvb-dibusb.h deleted file mode 100644 index c965b64fb1ab..000000000000 --- a/drivers/media/dvb/dibusb/dvb-dibusb.h +++ /dev/null @@ -1,327 +0,0 @@ -/* - * dvb-dibusb.h - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation, version 2. - * - * for more information see dvb-dibusb-core.c . - */ -#ifndef __DVB_DIBUSB_H__ -#define __DVB_DIBUSB_H__ - -#include <linux/input.h> -#include <linux/config.h> -#include <linux/usb.h> - -#include "dvb_frontend.h" -#include "dvb_demux.h" -#include "dvb_net.h" -#include "dmxdev.h" - -#include "dib3000.h" -#include "mt352.h" - -/* debug */ -#ifdef CONFIG_DVB_DIBCOM_DEBUG -#define dprintk(level,args...) \ - do { if ((dvb_dibusb_debug & level)) { printk(args); } } while (0) - -#define debug_dump(b,l) {\ - int i; \ - for (i = 0; i < l; i++) deb_xfer("%02x ", b[i]); \ - deb_xfer("\n");\ -} - -#else -#define dprintk(args...) -#define debug_dump(b,l) -#endif - -extern int dvb_dibusb_debug; - -/* Version information */ -#define DRIVER_VERSION "0.3" -#define DRIVER_DESC "DiBcom based USB Budget DVB-T device" -#define DRIVER_AUTHOR "Patrick Boettcher, patrick.boettcher@desy.de" - -#define deb_info(args...) dprintk(0x01,args) -#define deb_xfer(args...) dprintk(0x02,args) -#define deb_alot(args...) dprintk(0x04,args) -#define deb_ts(args...) dprintk(0x08,args) -#define deb_err(args...) dprintk(0x10,args) -#define deb_rc(args...) dprintk(0x20,args) - -/* generic log methods - taken from usb.h */ -#undef err -#define err(format, arg...) printk(KERN_ERR "dvb-dibusb: " format "\n" , ## arg) -#undef info -#define info(format, arg...) printk(KERN_INFO "dvb-dibusb: " format "\n" , ## arg) -#undef warn -#define warn(format, arg...) printk(KERN_WARNING "dvb-dibusb: " format "\n" , ## arg) - -struct dibusb_usb_controller { - const char *name; /* name of the usb controller */ - u16 cpu_cs_register; /* needs to be restarted, when the firmware has been downloaded. */ -}; - -typedef enum { - DIBUSB1_1 = 0, - DIBUSB1_1_AN2235, - DIBUSB2_0, - UMT2_0, - DIBUSB2_0B, - NOVAT_USB2, - DTT200U, -} dibusb_class_t; - -typedef enum { - DIBUSB_TUNER_CABLE_THOMSON = 0, - DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5, - DIBUSB_TUNER_CABLE_LG_TDTP_E102P, - DIBUSB_TUNER_COFDM_PANASONIC_ENV77H11D5, -} dibusb_tuner_t; - -typedef enum { - DIBUSB_DIB3000MB = 0, - DIBUSB_DIB3000MC, - DIBUSB_MT352, - DTT200U_FE, -} dibusb_demodulator_t; - -typedef enum { - DIBUSB_RC_NO = 0, - DIBUSB_RC_NEC_PROTOCOL, - DIBUSB_RC_HAUPPAUGE_PROTO, -} dibusb_remote_t; - -struct dibusb_tuner { - dibusb_tuner_t id; - - u8 pll_addr; /* tuner i2c address */ -}; -extern struct dibusb_tuner dibusb_tuner[]; - -#define DIBUSB_POSSIBLE_I2C_ADDR_NUM 4 -struct dibusb_demod { - dibusb_demodulator_t id; - - int pid_filter_count; /* counter of the internal pid_filter */ - u8 i2c_addrs[DIBUSB_POSSIBLE_I2C_ADDR_NUM]; /* list of possible i2c addresses of the demod */ -}; - -#define DIBUSB_MAX_TUNER_NUM 2 -struct dibusb_device_class { - dibusb_class_t id; - - const struct dibusb_usb_controller *usb_ctrl; /* usb controller */ - const char *firmware; /* valid firmware filenames */ - - int pipe_cmd; /* command pipe (read/write) */ - int pipe_data; /* data pipe */ - - int urb_count; /* number of data URBs to be submitted */ - int urb_buffer_size; /* the size of the buffer for each URB */ - - dibusb_remote_t remote_type; /* does this device have a ir-receiver */ - - struct dibusb_demod *demod; /* which demodulator is mount */ - struct dibusb_tuner *tuner; /* which tuner can be found here */ -}; - -#define DIBUSB_ID_MAX_NUM 15 -struct dibusb_usb_device { - const char *name; /* real name of the box */ - struct dibusb_device_class *dev_cl; /* which dibusb_device_class is this device part of */ - - struct usb_device_id *cold_ids[DIBUSB_ID_MAX_NUM]; /* list of USB ids when this device is at pre firmware state */ - struct usb_device_id *warm_ids[DIBUSB_ID_MAX_NUM]; /* list of USB ids when this device is at post firmware state */ -}; - -/* a PID for the pid_filter list, when in use */ -struct dibusb_pid -{ - int index; - u16 pid; - int active; -}; - -struct usb_dibusb { - /* usb */ - struct usb_device * udev; - - struct dibusb_usb_device * dibdev; - -#define DIBUSB_STATE_INIT 0x000 -#define DIBUSB_STATE_URB_LIST 0x001 -#define DIBUSB_STATE_URB_BUF 0x002 -#define DIBUSB_STATE_URB_INIT 0x004 -#define DIBUSB_STATE_DVB 0x008 -#define DIBUSB_STATE_I2C 0x010 -#define DIBUSB_STATE_REMOTE 0x020 -#define DIBUSB_STATE_URB_SUBMIT 0x040 - int init_state; - - int feedcount; - struct dib_fe_xfer_ops xfer_ops; - - struct dibusb_tuner *tuner; - - struct urb **urb_list; - u8 *buffer; - dma_addr_t dma_handle; - - /* I2C */ - struct i2c_adapter i2c_adap; - - /* locking */ - struct semaphore usb_sem; - struct semaphore i2c_sem; - - /* dvb */ - struct dvb_adapter adapter; - struct dmxdev dmxdev; - struct dvb_demux demux; - struct dvb_net dvb_net; - struct dvb_frontend* fe; - - int (*fe_sleep) (struct dvb_frontend *); - int (*fe_init) (struct dvb_frontend *); - - /* remote control */ - struct input_dev rc_input_dev; - struct work_struct rc_query_work; - int last_event; - int last_state; /* for Hauppauge RC protocol */ - int repeat_key_count; - int rc_key_repeat_count; /* module parameter */ - - /* module parameters */ - int pid_parse; - int rc_query_interval; -}; - -/* commonly used functions in the separated files */ - -/* dvb-dibusb-firmware.c */ -int dibusb_loadfirmware(struct usb_device *udev, struct dibusb_usb_device *dibdev); - -/* dvb-dibusb-remote.c */ -int dibusb_remote_exit(struct usb_dibusb *dib); -int dibusb_remote_init(struct usb_dibusb *dib); - -/* dvb-dibusb-fe-i2c.c */ -int dibusb_fe_init(struct usb_dibusb* dib); -int dibusb_fe_exit(struct usb_dibusb *dib); -int dibusb_i2c_init(struct usb_dibusb *dib); -int dibusb_i2c_exit(struct usb_dibusb *dib); - -/* dvb-dibusb-dvb.c */ -void dibusb_urb_complete(struct urb *urb, struct pt_regs *ptregs); -int dibusb_dvb_init(struct usb_dibusb *dib); -int dibusb_dvb_exit(struct usb_dibusb *dib); - -/* dvb-dibusb-usb.c */ -int dibusb_readwrite_usb(struct usb_dibusb *dib, u8 *wbuf, u16 wlen, u8 *rbuf, - u16 rlen); -int dibusb_write_usb(struct usb_dibusb *dib, u8 *buf, u16 len); - -int dibusb_hw_wakeup(struct dvb_frontend *); -int dibusb_hw_sleep(struct dvb_frontend *); -int dibusb_set_streaming_mode(struct usb_dibusb *,u8); -int dibusb_streaming(struct usb_dibusb *,int); - -int dibusb_urb_init(struct usb_dibusb *); -int dibusb_urb_exit(struct usb_dibusb *); - -/* dvb-fe-dtt200u.c */ -struct dvb_frontend* dtt200u_fe_attach(struct usb_dibusb *,struct dib_fe_xfer_ops *); - -/* i2c and transfer stuff */ -#define DIBUSB_I2C_TIMEOUT 5000 - -/* - * protocol of all dibusb related devices - */ - -/* - * bulk msg to/from endpoint 0x01 - * - * general structure: - * request_byte parameter_bytes - */ - -#define DIBUSB_REQ_START_READ 0x00 -#define DIBUSB_REQ_START_DEMOD 0x01 - -/* - * i2c read - * bulk write: 0x02 ((7bit i2c_addr << 1) & 0x01) register_bytes length_word - * bulk read: byte_buffer (length_word bytes) - */ -#define DIBUSB_REQ_I2C_READ 0x02 - -/* - * i2c write - * bulk write: 0x03 (7bit i2c_addr << 1) register_bytes value_bytes - */ -#define DIBUSB_REQ_I2C_WRITE 0x03 - -/* - * polling the value of the remote control - * bulk write: 0x04 - * bulk read: byte_buffer (5 bytes) - * - * first byte of byte_buffer shows the status (0x00, 0x01, 0x02) - */ -#define DIBUSB_REQ_POLL_REMOTE 0x04 - -#define DIBUSB_RC_NEC_EMPTY 0x00 -#define DIBUSB_RC_NEC_KEY_PRESSED 0x01 -#define DIBUSB_RC_NEC_KEY_REPEATED 0x02 - -/* additional status values for Hauppauge Remote Control Protocol */ -#define DIBUSB_RC_HAUPPAUGE_KEY_PRESSED 0x01 -#define DIBUSB_RC_HAUPPAUGE_KEY_EMPTY 0x03 - -/* streaming mode: - * bulk write: 0x05 mode_byte - * - * mode_byte is mostly 0x00 - */ -#define DIBUSB_REQ_SET_STREAMING_MODE 0x05 - -/* interrupt the internal read loop, when blocking */ -#define DIBUSB_REQ_INTR_READ 0x06 - -/* io control - * 0x07 cmd_byte param_bytes - * - * param_bytes can be up to 32 bytes - * - * cmd_byte function parameter name - * 0x00 power mode - * 0x00 sleep - * 0x01 wakeup - * - * 0x01 enable streaming - * 0x02 disable streaming - * - * - */ -#define DIBUSB_REQ_SET_IOCTL 0x07 - -/* IOCTL commands */ - -/* change the power mode in firmware */ -#define DIBUSB_IOCTL_CMD_POWER_MODE 0x00 -#define DIBUSB_IOCTL_POWER_SLEEP 0x00 -#define DIBUSB_IOCTL_POWER_WAKEUP 0x01 - -/* modify streaming of the FX2 */ -#define DIBUSB_IOCTL_CMD_ENABLE_STREAM 0x01 -#define DIBUSB_IOCTL_CMD_DISABLE_STREAM 0x02 - -#endif diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index d19301d90a09..f11daae91cd4 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -35,6 +35,7 @@ #include <linux/moduleparam.h> #include <linux/list.h> #include <linux/suspend.h> +#include <linux/jiffies.h> #include <asm/processor.h> #include <asm/semaphore.h> @@ -327,7 +328,8 @@ static int dvb_frontend_is_exiting(struct dvb_frontend *fe) return 1; if (fepriv->dvbdev->writers == 1) - if (jiffies - fepriv->release_jiffies > dvb_shutdown_timeout * HZ) + if (time_after(jiffies, fepriv->release_jiffies + + dvb_shutdown_timeout * HZ)) return 1; return 0; @@ -389,8 +391,7 @@ static int dvb_frontend_thread(void *data) break; } - if (current->flags & PF_FREEZE) - refrigerator(PF_FREEZE); + try_to_freeze(); if (down_interruptible(&fepriv->sem)) break; diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c index 9d9662f4b8e6..4b7adca3e286 100644 --- a/drivers/media/dvb/dvb-core/dvbdev.c +++ b/drivers/media/dvb/dvb-core/dvbdev.c @@ -56,8 +56,7 @@ static const char * const dnames[] = { #define nums2minor(num,type,id) ((num << 6) | (id << 4) | type) #define MAX_DVB_MINORS (DVB_MAX_ADAPTERS*64) -struct class_simple *dvb_class; -EXPORT_SYMBOL(dvb_class); +static struct class *dvb_class; static struct dvb_device* dvbdev_find_device (int minor) { @@ -236,8 +235,8 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev, S_IFCHR | S_IRUSR | S_IWUSR, "dvb/adapter%d/%s%d", adap->num, dnames[type], id); - class_simple_device_add(dvb_class, MKDEV(DVB_MAJOR, nums2minor(adap->num, type, id)), - NULL, "dvb%d.%s%d", adap->num, dnames[type], id); + class_device_create(dvb_class, MKDEV(DVB_MAJOR, nums2minor(adap->num, type, id)), + NULL, "dvb%d.%s%d", adap->num, dnames[type], id); dprintk("DVB: register adapter%d/%s%d @ minor: %i (0x%02x)\n", adap->num, dnames[type], id, nums2minor(adap->num, type, id), @@ -256,7 +255,7 @@ void dvb_unregister_device(struct dvb_device *dvbdev) devfs_remove("dvb/adapter%d/%s%d", dvbdev->adapter->num, dnames[dvbdev->type], dvbdev->id); - class_simple_device_remove(MKDEV(DVB_MAJOR, nums2minor(dvbdev->adapter->num, + class_device_destroy(dvb_class, MKDEV(DVB_MAJOR, nums2minor(dvbdev->adapter->num, dvbdev->type, dvbdev->id))); list_del (&dvbdev->list_head); @@ -412,7 +411,7 @@ static int __init init_dvbdev(void) devfs_mk_dir("dvb"); - dvb_class = class_simple_create(THIS_MODULE, "dvb"); + dvb_class = class_create(THIS_MODULE, "dvb"); if (IS_ERR(dvb_class)) { retval = PTR_ERR(dvb_class); goto error; @@ -429,7 +428,7 @@ error: static void __exit exit_dvbdev(void) { devfs_remove("dvb"); - class_simple_destroy(dvb_class); + class_destroy(dvb_class); cdev_del(&dvb_device_cdev); unregister_chrdev_region(MKDEV(DVB_MAJOR, 0), MAX_DVB_MINORS); } diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig new file mode 100644 index 000000000000..8aa32f6e447b --- /dev/null +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -0,0 +1,99 @@ +config DVB_USB + tristate "Support for various USB DVB devices" + depends on DVB_CORE && USB + select FW_LOADER + help + By enabling this you will be able to choose the various USB 1.1 and + USB2.0 DVB devices. + + Almost every USB device needs a firmware, please look into + <file:Documentation/dvb/README.dvb-usb> + + Say Y if you own an USB DVB device. + +config DVB_USB_DEBUG + bool "Enable extended debug support for all DVB-USB devices" + depends on DVB_USB + help + Say Y if you want to enable debuging. See modinfo dvb-usb (and the + appropriate drivers) for debug levels. + +config DVB_USB_A800 + tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)" + depends on DVB_USB + help + Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver. + +config DVB_USB_DIBUSB_MB + tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)" + depends on DVB_USB + help + Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by + DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator. + + Devices supported by this driver: + TwinhanDTV USB-Ter (VP7041) + TwinhanDTV Magic Box (VP7041e) + KWorld/JetWay/ADSTech V-Stream XPERT DTV - DVB-T USB1.1 and USB2.0 + Hama DVB-T USB1.1-Box + DiBcom USB1.1 reference devices (non-public) + Ultima Electronic/Artec T1 USB TVBOX + Compro Videomate DVB-U2000 - DVB-T USB + Grandtec DVB-T USB + Avermedia AverTV DVBT USB1.1 + Artec T1 USB1.1 boxes + + The VP7041 seems to be identical to "CTS Portable" (Chinese + Television System). + + Say Y if you own such a device and want to use it. You should build it as + a module. + +config DVB_USB_DIBUSB_MC + tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)" + depends on DVB_USB + help + Support for 2.0 DVB-T receivers based on reference designs made by + DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator. + + Devices supported by this driver: + DiBcom USB2.0 reference devices (non-public) + Artec T1 USB2.0 boxes + + Say Y if you own such a device and want to use it. You should build it as + a module. + +config DVB_USB_UMT_010 + tristate "HanfTek UMT-010 DVB-T USB2.0 support" + depends on DVB_USB + help + Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver. + +config DVB_USB_DIGITV + tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support" + depends on DVB_USB + help + Say Y here to support the Nebula Electronics uDigitV USB2.0 DVB-T receiver. + +config DVB_USB_VP7045 + tristate "TwinhanDTV Alpha/MagicBoxII and DNTV tinyUSB2 DVB-T USB2.0 support" + depends on DVB_USB + help + Say Y here to support the + TwinhanDTV Alpha (stick) (VP-7045), + TwinhanDTV MagicBox II (VP-7046) and + DigitalNow TinyUSB 2 DVB-t DVB-T USB2.0 receivers. + +config DVB_USB_NOVA_T_USB2 + tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support" + depends on DVB_USB + help + Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver. + +config DVB_USB_DTT200U + tristate "Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 support" + depends on DVB_USB + help + Say Y here to support the Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 receiver. + + The receivers are also known as DTT200U (Yakumo) and UB300 (Yuan). diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile new file mode 100644 index 000000000000..d65b50f9abb0 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -0,0 +1,30 @@ +dvb-usb-objs = dvb-usb-firmware.o dvb-usb-init.o dvb-usb-urb.o dvb-usb-i2c.o dvb-usb-dvb.o dvb-usb-remote.o +obj-$(CONFIG_DVB_USB) += dvb-usb.o + +dvb-usb-vp7045-objs = vp7045.o vp7045-fe.o +obj-$(CONFIG_DVB_USB_VP7045) += dvb-usb-vp7045.o + +dvb-usb-dtt200u-objs = dtt200u.o dtt200u-fe.o +obj-$(CONFIG_DVB_USB_DTT200U) += dvb-usb-dtt200u.o + +dvb-usb-dibusb-common-objs = dibusb-common.o + +dvb-usb-a800-objs = a800.o +obj-$(CONFIG_DVB_USB_A800) += dvb-usb-dibusb-common.o dvb-usb-a800.o + +dvb-usb-dibusb-mb-objs = dibusb-mb.o +obj-$(CONFIG_DVB_USB_DIBUSB_MB) += dvb-usb-dibusb-common.o dvb-usb-dibusb-mb.o + +dvb-usb-dibusb-mc-objs = dibusb-mc.o +obj-$(CONFIG_DVB_USB_DIBUSB_MC) += dvb-usb-dibusb-common.o dvb-usb-dibusb-mc.o + +dvb-usb-nova-t-usb2-objs = nova-t-usb2.o +obj-$(CONFIG_DVB_USB_NOVA_T_USB2) += dvb-usb-dibusb-common.o dvb-usb-nova-t-usb2.o + +dvb-usb-umt-010-objs = umt-010.o +obj-$(CONFIG_DVB_USB_UMT_010) += dvb-usb-dibusb-common.o dvb-usb-umt-010.o + +dvb-usb-digitv-objs = digitv.o +obj-$(CONFIG_DVB_USB_DIGITV) += dvb-usb-digitv.o + +EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ diff --git a/drivers/media/dvb/dvb-usb/a800.c b/drivers/media/dvb/dvb-usb/a800.c new file mode 100644 index 000000000000..a3542935604f --- /dev/null +++ b/drivers/media/dvb/dvb-usb/a800.c @@ -0,0 +1,176 @@ +/* DVB USB framework compliant Linux driver for the AVerMedia AverTV DVB-T + * USB2.0 (A800) DVB-T receiver. + * + * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de) + * + * Thanks to + * - AVerMedia who kindly provided information and + * - Glen Harris who suffered from my mistakes during development. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dibusb.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (rc=1 (or-able))." DVB_USB_DEBUG_STATUS); +#define deb_rc(args...) dprintk(debug,0x01,args) + +static int a800_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + /* do nothing for the AVerMedia */ + return 0; +} + +static struct dvb_usb_rc_key a800_rc_keys[] = { + { 0x02, 0x01, KEY_PROG1 }, /* SOURCE */ + { 0x02, 0x00, KEY_POWER }, /* POWER */ + { 0x02, 0x05, KEY_1 }, /* 1 */ + { 0x02, 0x06, KEY_2 }, /* 2 */ + { 0x02, 0x07, KEY_3 }, /* 3 */ + { 0x02, 0x09, KEY_4 }, /* 4 */ + { 0x02, 0x0a, KEY_5 }, /* 5 */ + { 0x02, 0x0b, KEY_6 }, /* 6 */ + { 0x02, 0x0d, KEY_7 }, /* 7 */ + { 0x02, 0x0e, KEY_8 }, /* 8 */ + { 0x02, 0x0f, KEY_9 }, /* 9 */ + { 0x02, 0x12, KEY_LEFT }, /* L / DISPLAY */ + { 0x02, 0x11, KEY_0 }, /* 0 */ + { 0x02, 0x13, KEY_RIGHT }, /* R / CH RTN */ + { 0x02, 0x17, KEY_PROG2 }, /* SNAP SHOT */ + { 0x02, 0x10, KEY_PROG3 }, /* 16-CH PREV */ + { 0x02, 0x03, KEY_CHANNELUP }, /* CH UP */ + { 0x02, 0x1e, KEY_VOLUMEDOWN }, /* VOL DOWN */ + { 0x02, 0x0c, KEY_ZOOM }, /* FULL SCREEN */ + { 0x02, 0x1f, KEY_VOLUMEUP }, /* VOL UP */ + { 0x02, 0x02, KEY_CHANNELDOWN }, /* CH DOWN */ + { 0x02, 0x14, KEY_MUTE }, /* MUTE */ + { 0x02, 0x08, KEY_AUDIO }, /* AUDIO */ + { 0x02, 0x19, KEY_RECORD }, /* RECORD */ + { 0x02, 0x18, KEY_PLAY }, /* PLAY */ + { 0x02, 0x1b, KEY_STOP }, /* STOP */ + { 0x02, 0x1a, KEY_PLAYPAUSE }, /* TIMESHIFT / PAUSE */ + { 0x02, 0x1d, KEY_BACK }, /* << / RED */ + { 0x02, 0x1c, KEY_FORWARD }, /* >> / YELLOW */ + { 0x02, 0x03, KEY_TEXT }, /* TELETEXT */ + { 0x02, 0x01, KEY_FIRST }, /* |<< / GREEN */ + { 0x02, 0x00, KEY_LAST }, /* >>| / BLUE */ + { 0x02, 0x04, KEY_EPG }, /* EPG */ + { 0x02, 0x15, KEY_MENU }, /* MENU */ +}; + +int a800_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 key[5]; + if (usb_control_msg(d->udev,usb_rcvctrlpipe(d->udev,0), + 0x04, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, key, 5, + 2*HZ) != 5) + return -ENODEV; + + /* call the universal NEC remote processor, to find out the key's state and event */ + dvb_usb_nec_rc_key_to_event(d,key,event,state); + if (key[0] != 0) + deb_rc("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]); + return 0; +} + +/* USB Driver stuff */ +static struct dvb_usb_properties a800_properties; + +static int a800_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf,&a800_properties,THIS_MODULE); +} + +/* do not change the order of the ID table */ +static struct usb_device_id a800_table [] = { +/* 00 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_DVBT_USB2_COLD) }, +/* 01 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_DVBT_USB2_WARM) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, a800_table); + +static struct dvb_usb_properties a800_properties = { + .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_IS_AN_I2C_ADAPTER, + .pid_filter_count = 32, + + .usb_ctrl = CYPRESS_FX2, + + .firmware = "dvb-usb-avertv-a800-02.fw", + + .size_of_priv = sizeof(struct dibusb_state), + + .streaming_ctrl = dibusb2_0_streaming_ctrl, + .pid_filter = dibusb_pid_filter, + .pid_filter_ctrl = dibusb_pid_filter_ctrl, + .power_ctrl = a800_power_ctrl, + .frontend_attach = dibusb_dib3000mc_frontend_attach, + .tuner_attach = dibusb_dib3000mc_tuner_attach, + + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = a800_rc_keys, + .rc_key_map_size = ARRAY_SIZE(a800_rc_keys), + .rc_query = a800_rc_query, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x06, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 1, + .devices = { + { "AVerMedia AverTV DVB-T USB 2.0 (A800)", + { &a800_table[0], NULL }, + { &a800_table[1], NULL }, + }, + } +}; + +static struct usb_driver a800_driver = { + .owner = THIS_MODULE, + .name = "AVerMedia AverTV DVB-T USB 2.0 (A800)", + .probe = a800_probe, + .disconnect = dvb_usb_device_exit, + .id_table = a800_table, +}; + +/* module stuff */ +static int __init a800_module_init(void) +{ + int result; + if ((result = usb_register(&a800_driver))) { + err("usb_register failed. Error number %d",result); + return result; + } + + return 0; +} + +static void __exit a800_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&a800_driver); +} + +module_init (a800_module_init); +module_exit (a800_module_exit); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("AVerMedia AverTV DVB-T USB 2.0 (A800)"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dibusb-common.c b/drivers/media/dvb/dvb-usb/dibusb-common.c new file mode 100644 index 000000000000..63b626f70c81 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dibusb-common.c @@ -0,0 +1,272 @@ +/* Common methods for dibusb-based-receivers. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dibusb.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info (|-able))." DVB_USB_DEBUG_STATUS); +MODULE_LICENSE("GPL"); + +#define deb_info(args...) dprintk(debug,0x01,args) + +/* common stuff used by the different dibusb modules */ +int dibusb_streaming_ctrl(struct dvb_usb_device *d, int onoff) +{ + if (d->priv != NULL) { + struct dib_fe_xfer_ops *ops = d->priv; + if (ops->fifo_ctrl != NULL) + if (ops->fifo_ctrl(d->fe,onoff)) { + err("error while controlling the fifo of the demod."); + return -ENODEV; + } + } + return 0; +} +EXPORT_SYMBOL(dibusb_streaming_ctrl); + +int dibusb_pid_filter(struct dvb_usb_device *d, int index, u16 pid, int onoff) +{ + if (d->priv != NULL) { + struct dib_fe_xfer_ops *ops = d->priv; + if (d->pid_filtering && ops->pid_ctrl != NULL) + ops->pid_ctrl(d->fe,index,pid,onoff); + } + return 0; +} +EXPORT_SYMBOL(dibusb_pid_filter); + +int dibusb_pid_filter_ctrl(struct dvb_usb_device *d, int onoff) +{ + if (d->priv != NULL) { + struct dib_fe_xfer_ops *ops = d->priv; + if (ops->pid_parse != NULL) + if (ops->pid_parse(d->fe,onoff) < 0) + err("could not handle pid_parser"); + } + return 0; +} +EXPORT_SYMBOL(dibusb_pid_filter_ctrl); + +int dibusb_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 b[3]; + int ret; + b[0] = DIBUSB_REQ_SET_IOCTL; + b[1] = DIBUSB_IOCTL_CMD_POWER_MODE; + b[2] = onoff ? DIBUSB_IOCTL_POWER_WAKEUP : DIBUSB_IOCTL_POWER_SLEEP; + ret = dvb_usb_generic_write(d,b,3); + msleep(10); + return ret; +} +EXPORT_SYMBOL(dibusb_power_ctrl); + +int dibusb2_0_streaming_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 b[2]; + b[0] = DIBUSB_REQ_SET_IOCTL; + b[1] = onoff ? DIBUSB_IOCTL_CMD_ENABLE_STREAM : DIBUSB_IOCTL_CMD_DISABLE_STREAM; + + dvb_usb_generic_write(d,b,3); + + return dibusb_streaming_ctrl(d,onoff); +} +EXPORT_SYMBOL(dibusb2_0_streaming_ctrl); + +int dibusb2_0_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + if (onoff) { + u8 b[3] = { DIBUSB_REQ_SET_IOCTL, DIBUSB_IOCTL_CMD_POWER_MODE, DIBUSB_IOCTL_POWER_WAKEUP }; + return dvb_usb_generic_write(d,b,3); + } else + return 0; +} +EXPORT_SYMBOL(dibusb2_0_power_ctrl); + +static int dibusb_i2c_msg(struct dvb_usb_device *d, u8 addr, + u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) +{ + u8 sndbuf[wlen+4]; /* lead(1) devaddr,direction(1) addr(2) data(wlen) (len(2) (when reading)) */ + /* write only ? */ + int wo = (rbuf == NULL || rlen == 0), + len = 2 + wlen + (wo ? 0 : 2); + + sndbuf[0] = wo ? DIBUSB_REQ_I2C_WRITE : DIBUSB_REQ_I2C_READ; + sndbuf[1] = (addr << 1) | (wo ? 0 : 1); + + memcpy(&sndbuf[2],wbuf,wlen); + + if (!wo) { + sndbuf[wlen+2] = (rlen >> 8) & 0xff; + sndbuf[wlen+3] = rlen & 0xff; + } + + return dvb_usb_generic_rw(d,sndbuf,len,rbuf,rlen,0); +} + +/* + * I2C master xfer function + */ +static int dibusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i; + + if (down_interruptible(&d->i2c_sem) < 0) + return -EAGAIN; + + if (num > 2) + warn("more than 2 i2c messages at a time is not handled yet. TODO."); + + for (i = 0; i < num; i++) { + /* write/read request */ + if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { + if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len, + msg[i+1].buf,msg[i+1].len) < 0) + break; + i++; + } else + if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len,NULL,0) < 0) + break; + } + + up(&d->i2c_sem); + return i; +} + +static u32 dibusb_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +struct i2c_algorithm dibusb_i2c_algo = { + .name = "DiBcom USB I2C algorithm", + .id = I2C_ALGO_BIT, + .master_xfer = dibusb_i2c_xfer, + .functionality = dibusb_i2c_func, +}; +EXPORT_SYMBOL(dibusb_i2c_algo); + +int dibusb_read_eeprom_byte(struct dvb_usb_device *d, u8 offs, u8 *val) +{ + u8 wbuf[1] = { offs }; + return dibusb_i2c_msg(d, 0x50, wbuf, 1, val, 1); +} +EXPORT_SYMBOL(dibusb_read_eeprom_byte); + +int dibusb_dib3000mc_frontend_attach(struct dvb_usb_device *d) +{ + struct dib3000_config demod_cfg; + struct dibusb_state *st = d->priv; + + demod_cfg.pll_set = dvb_usb_pll_set_i2c; + demod_cfg.pll_init = dvb_usb_pll_init_i2c; + + for (demod_cfg.demod_address = 0x8; demod_cfg.demod_address < 0xd; demod_cfg.demod_address++) + if ((d->fe = dib3000mc_attach(&demod_cfg,&d->i2c_adap,&st->ops)) != NULL) { + d->tuner_pass_ctrl = st->ops.tuner_pass_ctrl; + return 0; + } + + return -ENODEV; +} +EXPORT_SYMBOL(dibusb_dib3000mc_frontend_attach); + +int dibusb_dib3000mc_tuner_attach (struct dvb_usb_device *d) +{ + d->pll_addr = 0x60; + d->pll_desc = &dvb_pll_env57h1xd5; + return 0; +} +EXPORT_SYMBOL(dibusb_dib3000mc_tuner_attach); + +/* + * common remote control stuff + */ +struct dvb_usb_rc_key dibusb_rc_keys[] = { + /* Key codes for the little Artec T1/Twinhan/HAMA/ remote. */ + { 0x00, 0x16, KEY_POWER }, + { 0x00, 0x10, KEY_MUTE }, + { 0x00, 0x03, KEY_1 }, + { 0x00, 0x01, KEY_2 }, + { 0x00, 0x06, KEY_3 }, + { 0x00, 0x09, KEY_4 }, + { 0x00, 0x1d, KEY_5 }, + { 0x00, 0x1f, KEY_6 }, + { 0x00, 0x0d, KEY_7 }, + { 0x00, 0x19, KEY_8 }, + { 0x00, 0x1b, KEY_9 }, + { 0x00, 0x15, KEY_0 }, + { 0x00, 0x05, KEY_CHANNELUP }, + { 0x00, 0x02, KEY_CHANNELDOWN }, + { 0x00, 0x1e, KEY_VOLUMEUP }, + { 0x00, 0x0a, KEY_VOLUMEDOWN }, + { 0x00, 0x11, KEY_RECORD }, + { 0x00, 0x17, KEY_FAVORITES }, /* Heart symbol - Channel list. */ + { 0x00, 0x14, KEY_PLAY }, + { 0x00, 0x1a, KEY_STOP }, + { 0x00, 0x40, KEY_REWIND }, + { 0x00, 0x12, KEY_FASTFORWARD }, + { 0x00, 0x0e, KEY_PREVIOUS }, /* Recall - Previous channel. */ + { 0x00, 0x4c, KEY_PAUSE }, + { 0x00, 0x4d, KEY_SCREEN }, /* Full screen mode. */ + { 0x00, 0x54, KEY_AUDIO }, /* MTS - Switch to secondary audio. */ + /* additional keys TwinHan VisionPlus, the Artec seemingly not have */ + { 0x00, 0x0c, KEY_CANCEL }, /* Cancel */ + { 0x00, 0x1c, KEY_EPG }, /* EPG */ + { 0x00, 0x00, KEY_TAB }, /* Tab */ + { 0x00, 0x48, KEY_INFO }, /* Preview */ + { 0x00, 0x04, KEY_LIST }, /* RecordList */ + { 0x00, 0x0f, KEY_TEXT }, /* Teletext */ + /* Key codes for the KWorld/ADSTech/JetWay remote. */ + { 0x86, 0x12, KEY_POWER }, + { 0x86, 0x0f, KEY_SELECT }, /* source */ + { 0x86, 0x0c, KEY_UNKNOWN }, /* scan */ + { 0x86, 0x0b, KEY_EPG }, + { 0x86, 0x10, KEY_MUTE }, + { 0x86, 0x01, KEY_1 }, + { 0x86, 0x02, KEY_2 }, + { 0x86, 0x03, KEY_3 }, + { 0x86, 0x04, KEY_4 }, + { 0x86, 0x05, KEY_5 }, + { 0x86, 0x06, KEY_6 }, + { 0x86, 0x07, KEY_7 }, + { 0x86, 0x08, KEY_8 }, + { 0x86, 0x09, KEY_9 }, + { 0x86, 0x0a, KEY_0 }, + { 0x86, 0x18, KEY_ZOOM }, + { 0x86, 0x1c, KEY_UNKNOWN }, /* preview */ + { 0x86, 0x13, KEY_UNKNOWN }, /* snap */ + { 0x86, 0x00, KEY_UNDO }, + { 0x86, 0x1d, KEY_RECORD }, + { 0x86, 0x0d, KEY_STOP }, + { 0x86, 0x0e, KEY_PAUSE }, + { 0x86, 0x16, KEY_PLAY }, + { 0x86, 0x11, KEY_BACK }, + { 0x86, 0x19, KEY_FORWARD }, + { 0x86, 0x14, KEY_UNKNOWN }, /* pip */ + { 0x86, 0x15, KEY_ESC }, + { 0x86, 0x1a, KEY_UP }, + { 0x86, 0x1e, KEY_DOWN }, + { 0x86, 0x1f, KEY_LEFT }, + { 0x86, 0x1b, KEY_RIGHT }, +}; +EXPORT_SYMBOL(dibusb_rc_keys); + +int dibusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 key[5],cmd = DIBUSB_REQ_POLL_REMOTE; + dvb_usb_generic_rw(d,&cmd,1,key,5,0); + dvb_usb_nec_rc_key_to_event(d,key,event,state); + if (key[0] != 0) + deb_info("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]); + return 0; +} +EXPORT_SYMBOL(dibusb_rc_query); diff --git a/drivers/media/dvb/dvb-usb/dibusb-mb.c b/drivers/media/dvb/dvb-usb/dibusb-mb.c new file mode 100644 index 000000000000..a0ffbb59fa14 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dibusb-mb.c @@ -0,0 +1,316 @@ +/* DVB USB compliant linux driver for mobile DVB-T USB devices based on + * reference designs made by DiBcom (http://www.dibcom.fr/) (DiB3000M-B) + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * based on GPL code from DiBcom, which has + * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dibusb.h" + +static int dibusb_dib3000mb_frontend_attach(struct dvb_usb_device *d) +{ + struct dib3000_config demod_cfg; + struct dibusb_state *st = d->priv; + + demod_cfg.demod_address = 0x8; + demod_cfg.pll_set = dvb_usb_pll_set_i2c; + demod_cfg.pll_init = dvb_usb_pll_init_i2c; + + if ((d->fe = dib3000mb_attach(&demod_cfg,&d->i2c_adap,&st->ops)) == NULL) + return -ENODEV; + + d->tuner_pass_ctrl = st->ops.tuner_pass_ctrl; + + return 0; +} + +/* some of the dibusb 1.1 device aren't equipped with the default tuner + * (Thomson Cable), but with a Panasonic ENV77H11D5. This function figures + * this out. */ +static int dibusb_dib3000mb_tuner_attach (struct dvb_usb_device *d) +{ + u8 b[2] = { 0,0 }, b2[1]; + int ret = 0; + struct i2c_msg msg[2] = { + { .flags = 0, .buf = b, .len = 2 }, + { .flags = I2C_M_RD, .buf = b2, .len = 1 }, + }; + + /* the Panasonic sits on I2C addrass 0x60, the Thomson on 0x61 */ + msg[0].addr = msg[1].addr = 0x60; + + if (d->tuner_pass_ctrl) + d->tuner_pass_ctrl(d->fe,1,msg[0].addr); + + if (i2c_transfer (&d->i2c_adap, msg, 2) != 2) { + err("tuner i2c write failed."); + ret = -EREMOTEIO; + } + + if (d->tuner_pass_ctrl) + d->tuner_pass_ctrl(d->fe,0,msg[0].addr); + + if (b2[0] == 0xfe) { + info("this device has the Thomson Cable onboard. Which is default."); + d->pll_addr = 0x61; + d->pll_desc = &dvb_pll_tua6010xs; + } else { + u8 bpll[4] = { 0x0b, 0xf5, 0x85, 0xab }; + info("this device has the Panasonic ENV77H11D5 onboard."); + d->pll_addr = 0x60; + memcpy(d->pll_init,bpll,4); + d->pll_desc = &dvb_pll_tda665x; + } + + return ret; +} + +/* USB Driver stuff */ +static struct dvb_usb_properties dibusb1_1_properties; +static struct dvb_usb_properties dibusb1_1_an2235_properties; +static struct dvb_usb_properties dibusb2_0b_properties; + +static int dibusb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + if (dvb_usb_device_init(intf,&dibusb1_1_properties,THIS_MODULE) == 0 || + dvb_usb_device_init(intf,&dibusb1_1_an2235_properties,THIS_MODULE) == 0 || + dvb_usb_device_init(intf,&dibusb2_0b_properties,THIS_MODULE) == 0) + return 0; + + return -EINVAL; +} + +/* do not change the order of the ID table */ +static struct usb_device_id dibusb_dib3000mb_table [] = { +/* 00 */ { USB_DEVICE(USB_VID_AVERMEDIA_UNK, USB_PID_AVERMEDIA_DVBT_USB_COLD)}, +/* 01 */ { USB_DEVICE(USB_VID_AVERMEDIA_UNK, USB_PID_AVERMEDIA_DVBT_USB_WARM)}, +/* 02 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_COLD) }, +/* 03 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_WARM) }, +/* 04 */ { USB_DEVICE(USB_VID_COMPRO_UNK, USB_PID_COMPRO_DVBU2000_UNK_COLD) }, +/* 05 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_COLD) }, +/* 06 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_WARM) }, +/* 07 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_COLD) }, +/* 08 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_WARM) }, +/* 09 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_COLD) }, +/* 10 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_WARM) }, +/* 11 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_COLD) }, +/* 12 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_WARM) }, +/* 13 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_COLD) }, +/* 14 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_WARM) }, +/* 15 */ { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7041_COLD) }, +/* 16 */ { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7041_WARM) }, +/* 17 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_COLD) }, +/* 18 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_WARM) }, +/* 19 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_COLD) }, +/* 20 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_WARM) }, +/* 21 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_COLD) }, +/* 22 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_WARM) }, +/* 23 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_COLD) }, +/* 24 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_WARM) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, dibusb_dib3000mb_table); + +static struct dvb_usb_properties dibusb1_1_properties = { + .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_IS_AN_I2C_ADAPTER, + .pid_filter_count = 16, + + .usb_ctrl = CYPRESS_AN2135, + + .firmware = "dvb-usb-dibusb-5.0.0.11.fw", + + .size_of_priv = sizeof(struct dibusb_state), + + .streaming_ctrl = dibusb_streaming_ctrl, + .pid_filter = dibusb_pid_filter, + .pid_filter_ctrl = dibusb_pid_filter_ctrl, + .power_ctrl = dibusb_power_ctrl, + .frontend_attach = dibusb_dib3000mb_frontend_attach, + .tuner_attach = dibusb_dib3000mb_tuner_attach, + + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = dibusb_rc_keys, + .rc_key_map_size = 63, /* wow, that is ugly ... I want to load it to the driver dynamically */ + .rc_query = dibusb_rc_query, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 8, + .devices = { + { "AVerMedia AverTV DVBT USB1.1", + { &dibusb_dib3000mb_table[0], NULL }, + { &dibusb_dib3000mb_table[1], NULL }, + }, + { "Compro Videomate DVB-U2000 - DVB-T USB1.1 (please confirm to linux-dvb)", + { &dibusb_dib3000mb_table[2], &dibusb_dib3000mb_table[4], NULL}, + { &dibusb_dib3000mb_table[3], NULL }, + }, + { "DiBcom USB1.1 DVB-T reference design (MOD3000)", + { &dibusb_dib3000mb_table[5], NULL }, + { &dibusb_dib3000mb_table[6], NULL }, + }, + { "KWorld V-Stream XPERT DTV - DVB-T USB1.1", + { &dibusb_dib3000mb_table[7], NULL }, + { &dibusb_dib3000mb_table[8], NULL }, + }, + { "Grandtec USB1.1 DVB-T", + { &dibusb_dib3000mb_table[9], &dibusb_dib3000mb_table[11], NULL }, + { &dibusb_dib3000mb_table[10], &dibusb_dib3000mb_table[12], NULL }, + }, + { "Unkown USB1.1 DVB-T device ???? please report the name to the author", + { &dibusb_dib3000mb_table[13], NULL }, + { &dibusb_dib3000mb_table[14], NULL }, + }, + { "TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device", + { &dibusb_dib3000mb_table[15], &dibusb_dib3000mb_table[17], NULL}, + { &dibusb_dib3000mb_table[16], &dibusb_dib3000mb_table[18], NULL}, + }, + { "Artec T1 USB1.1 TVBOX with AN2135", + { &dibusb_dib3000mb_table[19], NULL }, + { &dibusb_dib3000mb_table[20], NULL }, + }, + } +}; + +static struct dvb_usb_properties dibusb1_1_an2235_properties = { + .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = CYPRESS_AN2235, + + .firmware = "dvb-usb-dibusb-an2235-01.fw", + + .size_of_priv = sizeof(struct dibusb_state), + + .streaming_ctrl = dibusb_streaming_ctrl, + .pid_filter = dibusb_pid_filter, + .pid_filter_ctrl = dibusb_pid_filter_ctrl, + .power_ctrl = dibusb_power_ctrl, + .frontend_attach = dibusb_dib3000mb_frontend_attach, + .tuner_attach = dibusb_dib3000mb_tuner_attach, + + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = dibusb_rc_keys, + .rc_key_map_size = 63, /* wow, that is ugly ... I want to load it to the driver dynamically */ + .rc_query = dibusb_rc_query, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 1, + .devices = { + { "Artec T1 USB1.1 TVBOX with AN2235", + { &dibusb_dib3000mb_table[20], NULL }, + { &dibusb_dib3000mb_table[21], NULL }, + }, + } +}; + +static struct dvb_usb_properties dibusb2_0b_properties = { + .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = CYPRESS_FX2, + + .firmware = "dvb-usb-adstech-usb2-01.fw", + + .size_of_priv = sizeof(struct dibusb_state), + + .streaming_ctrl = dibusb2_0_streaming_ctrl, + .pid_filter = dibusb_pid_filter, + .pid_filter_ctrl = dibusb_pid_filter_ctrl, + .power_ctrl = dibusb2_0_power_ctrl, + .frontend_attach = dibusb_dib3000mb_frontend_attach, + .tuner_attach = dibusb_dib3000mb_tuner_attach, + + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = dibusb_rc_keys, + .rc_key_map_size = 63, /* wow, that is ugly ... I want to load it to the driver dynamically */ + .rc_query = dibusb_rc_query, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x06, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 2, + .devices = { + { "KWorld/ADSTech Instant DVB-T USB 2.0", + { &dibusb_dib3000mb_table[23], NULL }, + { &dibusb_dib3000mb_table[24], NULL }, /* device ID with default DIBUSB2_0-firmware */ + }, + } +}; + +static struct usb_driver dibusb_driver = { + .owner = THIS_MODULE, + .name = "DiBcom based USB DVB-T devices (DiB3000M-B based)", + .probe = dibusb_probe, + .disconnect = dvb_usb_device_exit, + .id_table = dibusb_dib3000mb_table, +}; + +/* module stuff */ +static int __init dibusb_module_init(void) +{ + int result; + if ((result = usb_register(&dibusb_driver))) { + err("usb_register failed. Error number %d",result); + return result; + } + + return 0; +} + +static void __exit dibusb_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&dibusb_driver); +} + +module_init (dibusb_module_init); +module_exit (dibusb_module_exit); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Driver for DiBcom USB DVB-T devices (DiB3000M-B based)"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dibusb-mc.c b/drivers/media/dvb/dvb-usb/dibusb-mc.c new file mode 100644 index 000000000000..aad8ed3fe005 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dibusb-mc.c @@ -0,0 +1,116 @@ +/* DVB USB compliant linux driver for mobile DVB-T USB devices based on + * reference designs made by DiBcom (http://www.dibcom.fr/) (DiB3000M-C/P) + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * based on GPL code from DiBcom, which has + * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dibusb.h" + +/* USB Driver stuff */ +static struct dvb_usb_properties dibusb_mc_properties; + +static int dibusb_mc_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf,&dibusb_mc_properties,THIS_MODULE); +} + +/* do not change the order of the ID table */ +static struct usb_device_id dibusb_dib3000mc_table [] = { +/* 00 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3001_COLD) }, +/* 01 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3001_WARM) }, +/* 02 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_COLD) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, dibusb_dib3000mc_table); + +static struct dvb_usb_properties dibusb_mc_properties = { + .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_IS_AN_I2C_ADAPTER, + .pid_filter_count = 32, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-dibusb-6.0.0.8.fw", + + .size_of_priv = sizeof(struct dibusb_state), + + .streaming_ctrl = dibusb2_0_streaming_ctrl, + .pid_filter = dibusb_pid_filter, + .pid_filter_ctrl = dibusb_pid_filter_ctrl, + .power_ctrl = dibusb2_0_power_ctrl, + .frontend_attach = dibusb_dib3000mc_frontend_attach, + .tuner_attach = dibusb_dib3000mc_tuner_attach, + + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = dibusb_rc_keys, + .rc_key_map_size = 63, /* FIXME */ + .rc_query = dibusb_rc_query, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x06, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 2, + .devices = { + { "DiBcom USB2.0 DVB-T reference design (MOD3000P)", + { &dibusb_dib3000mc_table[0], NULL }, + { &dibusb_dib3000mc_table[1], NULL }, + }, + { "Artec T1 USB2.0 TVBOX (please report the warm ID)", + { &dibusb_dib3000mc_table[2], NULL }, + { NULL }, + }, + } +}; + +static struct usb_driver dibusb_mc_driver = { + .owner = THIS_MODULE, + .name = "DiBcom based USB2.0 DVB-T (DiB3000M-C/P based) devices", + .probe = dibusb_mc_probe, + .disconnect = dvb_usb_device_exit, + .id_table = dibusb_dib3000mc_table, +}; + +/* module stuff */ +static int __init dibusb_mc_module_init(void) +{ + int result; + if ((result = usb_register(&dibusb_mc_driver))) { + err("usb_register failed. Error number %d",result); + return result; + } + + return 0; +} + +static void __exit dibusb_mc_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&dibusb_mc_driver); +} + +module_init (dibusb_mc_module_init); +module_exit (dibusb_mc_module_exit); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Driver for DiBcom USB2.0 DVB-T (DiB3000M-C/P based) devices"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dibusb.h b/drivers/media/dvb/dvb-usb/dibusb.h new file mode 100644 index 000000000000..6611f62977c0 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dibusb.h @@ -0,0 +1,122 @@ +/* Header file for all dibusb-based-receivers. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#ifndef _DVB_USB_DIBUSB_H_ +#define _DVB_USB_DIBUSB_H_ + +#define DVB_USB_LOG_PREFIX "dibusb" +#include "dvb-usb.h" + +#include "dib3000.h" + +/* + * protocol of all dibusb related devices + */ + +/* + * bulk msg to/from endpoint 0x01 + * + * general structure: + * request_byte parameter_bytes + */ + +#define DIBUSB_REQ_START_READ 0x00 +#define DIBUSB_REQ_START_DEMOD 0x01 + +/* + * i2c read + * bulk write: 0x02 ((7bit i2c_addr << 1) & 0x01) register_bytes length_word + * bulk read: byte_buffer (length_word bytes) + */ +#define DIBUSB_REQ_I2C_READ 0x02 + +/* + * i2c write + * bulk write: 0x03 (7bit i2c_addr << 1) register_bytes value_bytes + */ +#define DIBUSB_REQ_I2C_WRITE 0x03 + +/* + * polling the value of the remote control + * bulk write: 0x04 + * bulk read: byte_buffer (5 bytes) + */ +#define DIBUSB_REQ_POLL_REMOTE 0x04 + +/* additional status values for Hauppauge Remote Control Protocol */ +#define DIBUSB_RC_HAUPPAUGE_KEY_PRESSED 0x01 +#define DIBUSB_RC_HAUPPAUGE_KEY_EMPTY 0x03 + +/* streaming mode: + * bulk write: 0x05 mode_byte + * + * mode_byte is mostly 0x00 + */ +#define DIBUSB_REQ_SET_STREAMING_MODE 0x05 + +/* interrupt the internal read loop, when blocking */ +#define DIBUSB_REQ_INTR_READ 0x06 + +/* io control + * 0x07 cmd_byte param_bytes + * + * param_bytes can be up to 32 bytes + * + * cmd_byte function parameter name + * 0x00 power mode + * 0x00 sleep + * 0x01 wakeup + * + * 0x01 enable streaming + * 0x02 disable streaming + * + * + */ +#define DIBUSB_REQ_SET_IOCTL 0x07 + +/* IOCTL commands */ + +/* change the power mode in firmware */ +#define DIBUSB_IOCTL_CMD_POWER_MODE 0x00 +#define DIBUSB_IOCTL_POWER_SLEEP 0x00 +#define DIBUSB_IOCTL_POWER_WAKEUP 0x01 + +/* modify streaming of the FX2 */ +#define DIBUSB_IOCTL_CMD_ENABLE_STREAM 0x01 +#define DIBUSB_IOCTL_CMD_DISABLE_STREAM 0x02 + +struct dibusb_state { + struct dib_fe_xfer_ops ops; + + /* for RC5 remote control */ + int old_toggle; + int last_repeat_count; +}; + +extern struct i2c_algorithm dibusb_i2c_algo; + +extern int dibusb_dib3000mc_frontend_attach(struct dvb_usb_device *); +extern int dibusb_dib3000mc_tuner_attach (struct dvb_usb_device *); + +extern int dibusb_streaming_ctrl(struct dvb_usb_device *, int); +extern int dibusb_pid_filter(struct dvb_usb_device *, int, u16, int); +extern int dibusb_pid_filter_ctrl(struct dvb_usb_device *, int); +extern int dibusb_power_ctrl(struct dvb_usb_device *, int); +extern int dibusb2_0_streaming_ctrl(struct dvb_usb_device *, int); +extern int dibusb2_0_power_ctrl(struct dvb_usb_device *, int); + +#define DEFAULT_RC_INTERVAL 150 +//#define DEFAULT_RC_INTERVAL 100000 + +extern struct dvb_usb_rc_key dibusb_rc_keys[]; +extern int dibusb_rc_query(struct dvb_usb_device *, u32 *, int *); +extern int dibusb_read_eeprom_byte(struct dvb_usb_device *, u8, u8 *); + +#endif diff --git a/drivers/media/dvb/dvb-usb/digitv.c b/drivers/media/dvb/dvb-usb/digitv.c new file mode 100644 index 000000000000..5acf3fde9522 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/digitv.c @@ -0,0 +1,282 @@ +/* DVB USB compliant linux driver for Nebula Electronics uDigiTV DVB-T USB2.0 + * receiver + * + * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de) and + * Allan Third (allan.third@cs.man.ac.uk) + * + * partly based on the SDK published by Nebula Electronics (TODO do we want this line ?) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "digitv.h" + +#include "mt352.h" +#include "nxt6000.h" + +/* debug */ +int dvb_usb_digitv_debug; +module_param_named(debug,dvb_usb_digitv_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); + +static int digitv_ctrl_msg(struct dvb_usb_device *d, + u8 cmd, u8 vv, u8 *wbuf, int wlen, u8 *rbuf, int rlen) +{ + int wo = (rbuf == NULL || rlen == 0); /* write-only */ + u8 sndbuf[7],rcvbuf[7]; + memset(sndbuf,0,7); memset(rcvbuf,0,7); + + sndbuf[0] = cmd; + sndbuf[1] = vv; + sndbuf[2] = wo ? wlen : rlen; + + if (!wo) { + memcpy(&sndbuf[3],wbuf,wlen); + dvb_usb_generic_write(d,sndbuf,7); + } else { + dvb_usb_generic_rw(d,sndbuf,7,rcvbuf,7,10); + memcpy(&rbuf,&rcvbuf[3],rlen); + } + return 0; +} + +/* I2C */ +static int digitv_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i; + + if (down_interruptible(&d->i2c_sem) < 0) + return -EAGAIN; + + if (num > 2) + warn("more than 2 i2c messages at a time is not handled yet. TODO."); + + for (i = 0; i < num; i++) { + /* write/read request */ + if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { + if (digitv_ctrl_msg(d, USB_READ_COFDM, msg[i].buf[0], NULL, 0, + msg[i+1].buf,msg[i+1].len) < 0) + break; + i++; + } else + if (digitv_ctrl_msg(d,USB_WRITE_COFDM, msg[i].buf[0], + &msg[i].buf[1],msg[i].len-1,NULL,0) < 0) + break; + } + + up(&d->i2c_sem); + return i; +} + +static u32 digitv_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm digitv_i2c_algo = { + .name = "Nebula DigiTV USB I2C algorithm", + .id = I2C_ALGO_BIT, + .master_xfer = digitv_i2c_xfer, + .functionality = digitv_i2c_func, +}; + +/* Callbacks for DVB USB */ +static int digitv_identify_state (struct usb_device *udev, struct + dvb_usb_properties *props, struct dvb_usb_device_description **desc, + int *cold) +{ + *cold = udev->descriptor.iManufacturer == 0 && udev->descriptor.iProduct == 0; + return 0; +} + +static int digitv_mt352_demod_init(struct dvb_frontend *fe) +{ + static u8 mt352_clock_config[] = { 0x89, 0x38, 0x2d }; + static u8 mt352_reset[] = { 0x50, 0x80 }; + static u8 mt352_mclk_ratio[] = { 0x8b, 0x00 }; + + static u8 mt352_agc_cfg[] = { 0x68, 0xa0 }; + static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0xa0 }; + static u8 mt352_acq_ctl[] = { 0x53, 0x50 }; + static u8 mt352_agc_target[] = { 0x67, 0x20 }; + + static u8 mt352_rs_err_per[] = { 0x7c, 0x00, 0x01 }; + static u8 mt352_snr_select[] = { 0x79, 0x00, 0x20 }; + + static u8 mt352_input_freq_1[] = { 0x56, 0x31, 0x05 }; + + static u8 mt352_scan_ctl[] = { 0x88, 0x0f }; + static u8 mt352_capt_range[] = { 0x75, 0x32 }; + + mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); + mt352_write(fe, mt352_reset, sizeof(mt352_reset)); + msleep(1); + mt352_write(fe, mt352_mclk_ratio, sizeof(mt352_mclk_ratio)); + + mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); + mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); + mt352_write(fe, mt352_acq_ctl, sizeof(mt352_acq_ctl)); + mt352_write(fe, mt352_agc_target, sizeof(mt352_agc_target)); + + + mt352_write(fe, mt352_rs_err_per, sizeof(mt352_rs_err_per)); + mt352_write(fe, mt352_snr_select, sizeof(mt352_snr_select)); + + mt352_write(fe, mt352_input_freq_1, sizeof(mt352_input_freq_1)); + + mt352_write(fe, mt352_scan_ctl, sizeof(mt352_scan_ctl)); + mt352_write(fe, mt352_capt_range, sizeof(mt352_capt_range)); + + return 0; +} + +static struct mt352_config digitv_mt352_config = { + .demod_address = 0x0, /* ignored by the digitv anyway */ + .demod_init = digitv_mt352_demod_init, + .pll_set = NULL, /* TODO */ +}; + +static struct nxt6000_config digitv_nxt6000_config = { + .demod_address = 0x0, /* ignored by the digitv anyway */ + .clock_inversion = 0x0, + + .pll_init = NULL, + .pll_set = NULL, +}; + +static int digitv_frontend_attach(struct dvb_usb_device *d) +{ + if ((d->fe = mt352_attach(&digitv_mt352_config, &d->i2c_adap)) == NULL) + return 0; + if ((d->fe = nxt6000_attach(&digitv_nxt6000_config, &d->i2c_adap)) == NULL) { + + warn("nxt6000 support is not done yet, in fact you are one of the first " + "person who wants to use this device in Linux. Please report to " + "linux-dvb@linuxtv.org"); + + return 0; + } + return -EIO; +} + +static struct dvb_usb_rc_key digitv_rc_keys[] = { + { 0x00, 0x16, KEY_POWER }, /* dummy key */ +}; + +/* TODO is it really the NEC protocol ? */ +int digitv_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 key[5]; + + digitv_ctrl_msg(d,USB_READ_REMOTE,0,NULL,0,&key[1],4); + /* TODO state, maybe it is VV ? */ + if (key[1] != 0) + key[0] = 0x01; /* if something is inside the buffer, simulate key press */ + + /* call the universal NEC remote processor, to find out the key's state and event */ + dvb_usb_nec_rc_key_to_event(d,key,event,state); + if (key[0] != 0) + deb_rc("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]); + return 0; +} + + +/* DVB USB Driver stuff */ +static struct dvb_usb_properties digitv_properties; + +static int digitv_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf,&digitv_properties,THIS_MODULE); +} + +static struct usb_device_id digitv_table [] = { + { USB_DEVICE(USB_VID_ANCHOR, USB_PID_NEBULA_DIGITV) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, digitv_table); + +static struct dvb_usb_properties digitv_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-digitv-01.fw", + + .size_of_priv = 0, + + .streaming_ctrl = NULL, + .pid_filter = NULL, + .pid_filter_ctrl = NULL, + .power_ctrl = NULL, + .frontend_attach = digitv_frontend_attach, + .tuner_attach = NULL, // digitv_tuner_attach, + .read_mac_address = NULL, + + .rc_interval = 1000, + .rc_key_map = digitv_rc_keys, + .rc_key_map_size = ARRAY_SIZE(digitv_rc_keys), + .rc_query = digitv_rc_query, + + .identify_state = digitv_identify_state, + + .i2c_algo = &digitv_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 2, + .devices = { + { "Nebula Electronics uDigiTV DVB-T USB2.0)", + { &digitv_table[0], NULL }, + { NULL }, + }, + } +}; + +static struct usb_driver digitv_driver = { + .owner = THIS_MODULE, + .name = "Nebula Electronics uDigiTV DVB-T USB2.0 device", + .probe = digitv_probe, + .disconnect = dvb_usb_device_exit, + .id_table = digitv_table, +}; + +/* module stuff */ +static int __init digitv_module_init(void) +{ + int result; + if ((result = usb_register(&digitv_driver))) { + err("usb_register failed. Error number %d",result); + return result; + } + + return 0; +} + +static void __exit digitv_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&digitv_driver); +} + +module_init (digitv_module_init); +module_exit (digitv_module_exit); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Driver for Nebula Electronics uDigiTV DVB-T USB2.0"); +MODULE_VERSION("1.0-alpha"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/digitv.h b/drivers/media/dvb/dvb-usb/digitv.h new file mode 100644 index 000000000000..477ee428a70e --- /dev/null +++ b/drivers/media/dvb/dvb-usb/digitv.h @@ -0,0 +1,65 @@ +#ifndef _DVB_USB_DIGITV_H_ +#define _DVB_USB_DIGITV_H_ + +#define DVB_USB_LOG_PREFIX "digitv" +#include "dvb-usb.h" + +extern int dvb_usb_digitv_debug; +#define deb_rc(args...) dprintk(dvb_usb_digitv_debug,0x01,args) + +/* protocol (from usblogging and the SDK: + * + * Always 7 bytes bulk message(s) for controlling + * + * First byte describes the command. Reads are 2 consecutive transfer (as always). + * + * General structure: + * + * write or first message of a read: + * <cmdbyte> VV <len> B0 B1 B2 B3 + * + * second message of a read + * <cmdbyte> VV <len> R0 R1 R2 R3 + * + * whereas 0 < len <= 4 + * + * I2C address is stored somewhere inside the device. + * + * 0x01 read from EEPROM + * VV = offset; B* = 0; R* = value(s) + * + * 0x02 read register of the COFDM + * VV = register; B* = 0; R* = value(s) + * + * 0x05 write register of the COFDM + * VV = register; B* = value(s); + * + * 0x06 write to the tuner (only for NXT6000) + * VV = 0; B* = PLL data; len = 4; + * + * 0x03 read remote control + * VV = 0; B* = 0; len = 4; R* = key + * + * 0x07 write to the remote (don't know why one should this, resetting ?) + * VV = 0; B* = key; len = 4; + * + * 0x08 write remote type + * VV = 0; B[0] = 0x01, len = 4 + * + * 0x09 write device init + * TODO + */ +#define USB_READ_EEPROM 1 + +#define USB_READ_COFDM 2 +#define USB_WRITE_COFDM 5 + +#define USB_WRITE_TUNER 6 + +#define USB_READ_REMOTE 3 +#define USB_WRITE_REMOTE 7 +#define USB_WRITE_REMOTE_TYPE 8 + +#define USB_DEV_INIT 9 + +#endif diff --git a/drivers/media/dvb/dibusb/dvb-fe-dtt200u.c b/drivers/media/dvb/dvb-usb/dtt200u-fe.c index 1872aa6d200a..d17d768038c6 100644 --- a/drivers/media/dvb/dibusb/dvb-fe-dtt200u.c +++ b/drivers/media/dvb/dvb-usb/dtt200u-fe.c @@ -1,42 +1,18 @@ -/* - * dvb-dtt200u-fe.c is a driver which implements the frontend-part of the - * Yakumo/Typhoon/Hama USB2.0 boxes. It is hard-wired to the dibusb-driver as - * it uses the usb-transfer functions directly (maybe creating a - * generic-dvb-usb-lib for all usb-drivers will be reduce some more code.) +/* Frontend part of the Linux driver for the Yakumo/Hama/Typhoon DVB-T + * USB2.0 receiver. * * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@desy.de> * - * see dvb-dibusb-core.c for copyright details. - */ - -/* guessed protocol description (reverse engineered): - * read - * 00 - USB type 0x02 for usb2.0, 0x01 for usb1.1 - * 81 - <TS_LOCK> <current frequency divided by 250000> - * 82 - crash - do not touch - * 83 - crash - do not touch - * 84 - remote control - * 85 - crash - do not touch (OK, stop testing here) - * 88 - locking 2 bytes (0x80 0x40 == no signal, 0x89 0x20 == nice signal) - * 89 - noise-to-signal - * 8a - unkown 1 byte - signal_strength - * 8c - ber ??? - * 8d - ber - * 8e - unc + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. * - * write - * 02 - bandwidth - * 03 - frequency (divided by 250000) - * 04 - pid table (index pid(7:0) pid(12:8)) - * 05 - reset the pid table - * 08 - demod transfer enabled or not (FX2 transfer is enabled by default) + * see Documentation/dvb/README.dvb-usb for more information */ - -#include "dvb-dibusb.h" -#include "dvb_frontend.h" +#include "dtt200u.h" struct dtt200u_fe_state { - struct usb_dibusb *dib; + struct dvb_usb_device *d; struct dvb_frontend_parameters fep; struct dvb_frontend frontend; @@ -47,11 +23,11 @@ struct dtt200u_fe_state { static int dtt200u_fe_read_status(struct dvb_frontend* fe, fe_status_t *stat) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw[1] = { 0x81 }; + u8 bw = GET_TUNE_STAT; u8 br[3] = { 0 }; // u8 bdeb[5] = { 0 }; - dibusb_readwrite_usb(state->dib,bw,1,br,3); + dvb_usb_generic_rw(state->d,&bw,1,br,3,0); switch (br[0]) { case 0x01: *stat = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; @@ -60,12 +36,12 @@ static int dtt200u_fe_read_status(struct dvb_frontend* fe, fe_status_t *stat) *stat = 0; break; default: - moan("br[0]",0x81); + moan("br[0]",GET_TUNE_STAT); break; } // bw[0] = 0x88; -// dibusb_readwrite_usb(state->dib,bw,1,bdeb,5); +// dvb_usb_generic_rw(state->d,bw,1,bdeb,5,0); // deb_info("%02x: %02x %02x %02x %02x %02x\n",bw[0],bdeb[0],bdeb[1],bdeb[2],bdeb[3],bdeb[4]); @@ -74,27 +50,26 @@ static int dtt200u_fe_read_status(struct dvb_frontend* fe, fe_status_t *stat) static int dtt200u_fe_read_ber(struct dvb_frontend* fe, u32 *ber) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw[1] = { 0x8d }; + u8 bw = GET_BER; *ber = 0; - dibusb_readwrite_usb(state->dib,bw,1,(u8*) ber, 3); + dvb_usb_generic_rw(state->d,&bw,1,(u8*) ber,3,0); return 0; } static int dtt200u_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw[1] = { 0x8c }; + u8 bw = GET_UNK; *unc = 0; - dibusb_readwrite_usb(state->dib,bw,1,(u8*) unc, 3); + dvb_usb_generic_rw(state->d,&bw,1,(u8*) unc,3,0); return 0; } static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw[1] = { 0x8a }; - u8 b; - dibusb_readwrite_usb(state->dib,bw,1,&b, 1); + u8 bw = GET_SIG_STRENGTH, b; + dvb_usb_generic_rw(state->d,&bw,1,&b,1,0); *strength = (b << 8) | b; return 0; } @@ -102,18 +77,17 @@ static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strengt static int dtt200u_fe_read_snr(struct dvb_frontend* fe, u16 *snr) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw[1] = { 0x89 }; - u8 br[1] = { 0 }; - dibusb_readwrite_usb(state->dib,bw,1,br,1); - *snr = ((0xff - br[0]) << 8) | (0xff - br[0]); + u8 bw = GET_SNR,br; + dvb_usb_generic_rw(state->d,&bw,1,&br,1,0); + *snr = ~((br << 8) | br); return 0; } static int dtt200u_fe_init(struct dvb_frontend* fe) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 b[] = { 0x01 }; - return dibusb_write_usb(state->dib,b,1); + u8 b = RESET_DEMOD; + return dvb_usb_generic_write(state->d,&b,1); } static int dtt200u_fe_sleep(struct dvb_frontend* fe) @@ -134,7 +108,7 @@ static int dtt200u_fe_set_frontend(struct dvb_frontend* fe, { struct dtt200u_fe_state *state = fe->demodulator_priv; u16 freq = fep->frequency / 250000; - u8 bw,bwbuf[2] = { 0x03, 0 }, freqbuf[3] = { 0x02, 0, 0 }; + u8 bw,bwbuf[2] = { SET_BANDWIDTH, 0 }, freqbuf[3] = { SET_FREQUENCY, 0, 0 }; switch (fep->u.ofdm.bandwidth) { case BANDWIDTH_8_MHZ: bw = 8; break; @@ -147,11 +121,11 @@ static int dtt200u_fe_set_frontend(struct dvb_frontend* fe, deb_info("set_frontend\n"); bwbuf[1] = bw; - dibusb_write_usb(state->dib,bwbuf,2); + dvb_usb_generic_write(state->d,bwbuf,2); freqbuf[1] = freq & 0xff; freqbuf[2] = (freq >> 8) & 0xff; - dibusb_write_usb(state->dib,freqbuf,3); + dvb_usb_generic_write(state->d,freqbuf,3); memcpy(&state->fep,fep,sizeof(struct dvb_frontend_parameters)); @@ -172,37 +146,9 @@ static void dtt200u_fe_release(struct dvb_frontend* fe) kfree(state); } -static int dtt200u_pid_control(struct dvb_frontend *fe,int index, int pid,int onoff) -{ - struct dtt200u_fe_state *state = (struct dtt200u_fe_state*) fe->demodulator_priv; - u8 b_pid[4]; - pid = onoff ? pid : 0; - - b_pid[0] = 0x04; - b_pid[1] = index; - b_pid[2] = pid & 0xff; - b_pid[3] = (pid >> 8) & 0xff; - - dibusb_write_usb(state->dib,b_pid,4); - return 0; -} - -static int dtt200u_fifo_control(struct dvb_frontend *fe, int onoff) -{ - struct dtt200u_fe_state *state = (struct dtt200u_fe_state*) fe->demodulator_priv; - u8 b_streaming[2] = { 0x08, onoff }; - u8 b_rst_pid[1] = { 0x05 }; - - dibusb_write_usb(state->dib,b_streaming,2); - - if (!onoff) - dibusb_write_usb(state->dib,b_rst_pid,1); - return 0; -} - static struct dvb_frontend_ops dtt200u_fe_ops; -struct dvb_frontend* dtt200u_fe_attach(struct usb_dibusb *dib, struct dib_fe_xfer_ops *xfer_ops) +struct dvb_frontend* dtt200u_fe_attach(struct dvb_usb_device *d) { struct dtt200u_fe_state* state = NULL; @@ -214,14 +160,11 @@ struct dvb_frontend* dtt200u_fe_attach(struct usb_dibusb *dib, struct dib_fe_xfe deb_info("attaching frontend dtt200u\n"); - state->dib = dib; + state->d = d; state->frontend.ops = &dtt200u_fe_ops; state->frontend.demodulator_priv = state; - xfer_ops->fifo_ctrl = dtt200u_fifo_control; - xfer_ops->pid_ctrl = dtt200u_pid_control; - goto success; error: return NULL; diff --git a/drivers/media/dvb/dvb-usb/dtt200u.c b/drivers/media/dvb/dvb-usb/dtt200u.c new file mode 100644 index 000000000000..fb2b5a2da137 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dtt200u.c @@ -0,0 +1,171 @@ +/* DVB USB library compliant Linux driver for the Yakumo/Hama/Typhoon DVB-T + * USB2.0 receiver. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dtt200u.h" + +/* debug */ +int dvb_usb_dtt200u_debug; +module_param_named(debug,dvb_usb_dtt200u_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2 (or-able))." DVB_USB_DEBUG_STATUS); + +static int dtt200u_streaming_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 b_streaming[2] = { SET_TS_CTRL, onoff }; + u8 b_rst_pid = RESET_PID_FILTER; + + dvb_usb_generic_write(d,b_streaming,2); + + if (!onoff) + dvb_usb_generic_write(d,&b_rst_pid,1); + return 0; +} + +static int dtt200u_pid_filter(struct dvb_usb_device *d, int index, u16 pid, int onoff) +{ + u8 b_pid[4]; + pid = onoff ? pid : 0; + + b_pid[0] = SET_PID_FILTER; + b_pid[1] = index; + b_pid[2] = pid & 0xff; + b_pid[3] = (pid >> 8) & 0xff; + + return dvb_usb_generic_write(d,b_pid,4); +} + +/* remote control */ +/* key list for the tiny remote control (Yakumo, don't know about the others) */ +static struct dvb_usb_rc_key dtt200u_rc_keys[] = { + { 0x80, 0x01, KEY_MUTE }, + { 0x80, 0x02, KEY_CHANNELDOWN }, + { 0x80, 0x03, KEY_VOLUMEDOWN }, + { 0x80, 0x04, KEY_1 }, + { 0x80, 0x05, KEY_2 }, + { 0x80, 0x06, KEY_3 }, + { 0x80, 0x07, KEY_4 }, + { 0x80, 0x08, KEY_5 }, + { 0x80, 0x09, KEY_6 }, + { 0x80, 0x0a, KEY_7 }, + { 0x00, 0x0c, KEY_ZOOM }, + { 0x80, 0x0d, KEY_0 }, + { 0x00, 0x0e, KEY_SELECT }, + { 0x80, 0x12, KEY_POWER }, + { 0x80, 0x1a, KEY_CHANNELUP }, + { 0x80, 0x1b, KEY_8 }, + { 0x80, 0x1e, KEY_VOLUMEUP }, + { 0x80, 0x1f, KEY_9 }, +}; + +static int dtt200u_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 key[5],cmd = GET_RC_KEY; + dvb_usb_generic_rw(d,&cmd,1,key,5,0); + dvb_usb_nec_rc_key_to_event(d,key,event,state); + if (key[0] != 0) + deb_info("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]); + return 0; +} + +static int dtt200u_frontend_attach(struct dvb_usb_device *d) +{ + d->fe = dtt200u_fe_attach(d); + return 0; +} + +static struct dvb_usb_properties dtt200u_properties; + +static int dtt200u_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf,&dtt200u_properties,THIS_MODULE); +} + +static struct usb_device_id dtt200u_usb_table [] = { + { USB_DEVICE(USB_VID_AVERMEDIA_UNK, USB_PID_DTT200U_COLD) }, + { USB_DEVICE(USB_VID_AVERMEDIA_UNK, USB_PID_DTT200U_WARM) }, + { 0 }, +}; +MODULE_DEVICE_TABLE(usb, dtt200u_usb_table); + +static struct dvb_usb_properties dtt200u_properties = { + .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_NEED_PID_FILTERING, + .pid_filter_count = 255, /* It is a guess, but there are at least 10 */ + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-dtt200u-01.fw", + + .streaming_ctrl = dtt200u_streaming_ctrl, + .pid_filter = dtt200u_pid_filter, + .frontend_attach = dtt200u_frontend_attach, + + .rc_interval = 200, + .rc_key_map = dtt200u_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dtt200u_rc_keys), + .rc_query = dtt200u_rc_query, + + .generic_bulk_ctrl_endpoint = 0x01, + + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 1, + .devices = { + { .name = "Yakumo/Hama/Typhoon DVB-T USB2.0)", + .cold_ids = { &dtt200u_usb_table[0], &dtt200u_usb_table[2] }, + .warm_ids = { &dtt200u_usb_table[1], NULL }, + }, + { 0 }, + } +}; + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver dtt200u_usb_driver = { + .owner = THIS_MODULE, + .name = "Yakumo/Hama/Typhoon DVB-T USB2.0", + .probe = dtt200u_usb_probe, + .disconnect = dvb_usb_device_exit, + .id_table = dtt200u_usb_table, +}; + +/* module stuff */ +static int __init dtt200u_usb_module_init(void) +{ + int result; + if ((result = usb_register(&dtt200u_usb_driver))) { + err("usb_register failed. (%d)",result); + return result; + } + + return 0; +} + +static void __exit dtt200u_usb_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&dtt200u_usb_driver); +} + +module_init(dtt200u_usb_module_init); +module_exit(dtt200u_usb_module_exit); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Driver for the Yakumo/Hama/Typhoon DVB-T USB2.0 device"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dtt200u.h b/drivers/media/dvb/dvb-usb/dtt200u.h new file mode 100644 index 000000000000..ed4142071518 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dtt200u.h @@ -0,0 +1,66 @@ +/* Common header file of Linux driver for the Yakumo/Hama/Typhoon DVB-T + * USB2.0 receiver. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#ifndef _DVB_USB_DTT200U_H_ +#define _DVB_USB_DTT200U_H_ + +#define DVB_USB_LOG_PREFIX "dtt200u" +#include "dvb-usb.h" + +extern int dvb_usb_dtt200u_debug; +#define deb_info(args...) dprintk(dvb_usb_dtt200u_debug,0x01,args) +#define deb_xfer(args...) dprintk(dvb_usb_dtt200u_debug,0x02,args) + +/* guessed protocol description (reverse engineered): + * read + * 00 - USB type 0x02 for usb2.0, 0x01 for usb1.1 + * 81 - <TS_LOCK> <current frequency divided by 250000> + * 82 - crash - do not touch + * 83 - crash - do not touch + * 84 - remote control + * 85 - crash - do not touch (OK, stop testing here) + * 88 - locking 2 bytes (0x80 0x40 == no signal, 0x89 0x20 == nice signal) + * 89 - noise-to-signal + * 8a - unkown 1 byte - signal_strength + * 8c - ber ??? + * 8d - ber + * 8e - unc + */ + +#define GET_SPEED 0x00 +#define GET_TUNE_STAT 0x81 +#define GET_RC_KEY 0x84 +#define GET_STATUS 0x88 +#define GET_SNR 0x89 +#define GET_SIG_STRENGTH 0x8a +#define GET_UNK 0x8c +#define GET_BER 0x8d +#define GET_UNC 0x8e + +/* write + * 01 - reset the demod + * 02 - frequency (divided by 250000) + * 03 - bandwidth + * 04 - pid table (index pid(7:0) pid(12:8)) + * 05 - reset the pid table + * 08 - demod transfer enabled or not (FX2 transfer is enabled by default) + */ + +#define RESET_DEMOD 0x01 +#define SET_FREQUENCY 0x02 +#define SET_BANDWIDTH 0x03 +#define SET_PID_FILTER 0x04 +#define RESET_PID_FILTER 0x05 +#define SET_TS_CTRL 0x08 + +extern struct dvb_frontend * dtt200u_fe_attach(struct dvb_usb_device *d); + +#endif diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-common.h b/drivers/media/dvb/dvb-usb/dvb-usb-common.h new file mode 100644 index 000000000000..67e0d73fbceb --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dvb-usb-common.h @@ -0,0 +1,44 @@ +/* dvb-usb-common.h is part of the DVB USB library. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * a header file containing prototypes and types for internal use of the dvb-usb-lib + */ +#ifndef _DVB_USB_COMMON_H_ +#define _DVB_USB_COMMON_H_ + +#define DVB_USB_LOG_PREFIX "dvb-usb" +#include "dvb-usb.h" + +extern int dvb_usb_debug; + +#define deb_info(args...) dprintk(dvb_usb_debug,0x01,args) +#define deb_xfer(args...) dprintk(dvb_usb_debug,0x02,args) +#define deb_pll(args...) dprintk(dvb_usb_debug,0x04,args) +#define deb_ts(args...) dprintk(dvb_usb_debug,0x08,args) +#define deb_err(args...) dprintk(dvb_usb_debug,0x10,args) +#define deb_rc(args...) dprintk(dvb_usb_debug,0x20,args) +#define deb_fw(args...) dprintk(dvb_usb_debug,0x40,args) + +/* commonly used methods */ +extern int usb_cypress_load_firmware(struct usb_device *, const char *, int); + +extern int dvb_usb_urb_submit(struct dvb_usb_device *); +extern int dvb_usb_urb_kill(struct dvb_usb_device *); +extern int dvb_usb_urb_init(struct dvb_usb_device *); +extern int dvb_usb_urb_exit(struct dvb_usb_device *); + +extern int dvb_usb_i2c_init(struct dvb_usb_device *); +extern int dvb_usb_i2c_exit(struct dvb_usb_device *); + +extern int dvb_usb_dvb_init(struct dvb_usb_device *); +extern int dvb_usb_dvb_exit(struct dvb_usb_device *); + +extern int dvb_usb_fe_init(struct dvb_usb_device *); +extern int dvb_usb_fe_exit(struct dvb_usb_device *); + +extern int dvb_usb_remote_init(struct dvb_usb_device *); +extern int dvb_usb_remote_exit(struct dvb_usb_device *); + +#endif diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c b/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c new file mode 100644 index 000000000000..bdd72f779707 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c @@ -0,0 +1,210 @@ +/* dvb-usb-dvb.c is part of the DVB USB library. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * This file contains functions for initializing and handling the + * linux-dvb API. + */ +#include "dvb-usb-common.h" + +static int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, int onoff) +{ + struct dvb_usb_device *d = dvbdmxfeed->demux->priv; + int newfeedcount,ret; + + if (d == NULL) + return -ENODEV; + + newfeedcount = d->feedcount + (onoff ? 1 : -1); + + /* + * stop feed before setting a new pid if there will be no pid anymore + */ + if (newfeedcount == 0) { + deb_ts("stop feeding\n"); + + if (d->props.streaming_ctrl != NULL) + if ((ret = d->props.streaming_ctrl(d,0))) + err("error while stopping stream."); + + dvb_usb_urb_kill(d); + } + + d->feedcount = newfeedcount; + + /* activate the pid on the device specific pid_filter */ + deb_ts("setting pid: %5d %04x at index %d '%s'\n",dvbdmxfeed->pid,dvbdmxfeed->pid,dvbdmxfeed->index,onoff ? "on" : "off"); + if (d->props.caps & DVB_USB_HAS_PID_FILTER && + d->pid_filtering && + d->props.pid_filter != NULL) + d->props.pid_filter(d,dvbdmxfeed->index,dvbdmxfeed->pid,onoff); + + /* start the feed if this was the first feed and there is still a feed + * for reception. + */ + if (d->feedcount == onoff && d->feedcount > 0) { + + deb_ts("controlling pid parser\n"); + if (d->props.caps & DVB_USB_HAS_PID_FILTER && + d->props.caps & DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF && + d->props.pid_filter_ctrl != NULL) + if (d->props.pid_filter_ctrl(d,d->pid_filtering) < 0) + err("could not handle pid_parser"); + + deb_ts("start feeding\n"); + if (d->props.streaming_ctrl != NULL) + if (d->props.streaming_ctrl(d,1)) { + err("error while enabling fifo."); + return -ENODEV; + } + + dvb_usb_urb_submit(d); + } + return 0; +} + +static int dvb_usb_start_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + deb_ts("start pid: 0x%04x, feedtype: %d\n", dvbdmxfeed->pid,dvbdmxfeed->type); + return dvb_usb_ctrl_feed(dvbdmxfeed,1); +} + +static int dvb_usb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + deb_ts("stop pid: 0x%04x, feedtype: %d\n", dvbdmxfeed->pid, dvbdmxfeed->type); + return dvb_usb_ctrl_feed(dvbdmxfeed,0); +} + +int dvb_usb_dvb_init(struct dvb_usb_device *d) +{ + int ret; + + if ((ret = dvb_register_adapter(&d->dvb_adap, d->desc->name, + d->owner)) < 0) { + deb_info("dvb_register_adapter failed: error %d", ret); + goto err; + } + d->dvb_adap.priv = d; + + if (d->props.read_mac_address) { + if (d->props.read_mac_address(d,d->dvb_adap.proposed_mac) == 0) + info("MAC address: %02x:%02x:%02x:%02x:%02x:%02x",d->dvb_adap.proposed_mac[0], + d->dvb_adap.proposed_mac[1],d->dvb_adap.proposed_mac[2], + d->dvb_adap.proposed_mac[3],d->dvb_adap.proposed_mac[4], + d->dvb_adap.proposed_mac[5]); + else + err("MAC address reading failed."); + } + + + d->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING; + d->demux.priv = d; + + d->demux.feednum = d->demux.filternum = d->max_feed_count; + d->demux.start_feed = dvb_usb_start_feed; + d->demux.stop_feed = dvb_usb_stop_feed; + d->demux.write_to_decoder = NULL; + if ((ret = dvb_dmx_init(&d->demux)) < 0) { + err("dvb_dmx_init failed: error %d",ret); + goto err_dmx; + } + + d->dmxdev.filternum = d->demux.filternum; + d->dmxdev.demux = &d->demux.dmx; + d->dmxdev.capabilities = 0; + if ((ret = dvb_dmxdev_init(&d->dmxdev, &d->dvb_adap)) < 0) { + err("dvb_dmxdev_init failed: error %d",ret); + goto err_dmx_dev; + } + + dvb_net_init(&d->dvb_adap, &d->dvb_net, &d->demux.dmx); + + goto success; +err_dmx_dev: + dvb_dmx_release(&d->demux); +err_dmx: + dvb_unregister_adapter(&d->dvb_adap); +err: + return ret; +success: + d->state |= DVB_USB_STATE_DVB; + return 0; +} + +int dvb_usb_dvb_exit(struct dvb_usb_device *d) +{ + if (d->state & DVB_USB_STATE_DVB) { + deb_info("unregistering DVB part\n"); + dvb_net_release(&d->dvb_net); + d->demux.dmx.close(&d->demux.dmx); + dvb_dmxdev_release(&d->dmxdev); + dvb_dmx_release(&d->demux); + dvb_unregister_adapter(&d->dvb_adap); + d->state &= ~DVB_USB_STATE_DVB; + } + return 0; +} + +static int dvb_usb_fe_wakeup(struct dvb_frontend *fe) +{ + struct dvb_usb_device *d = fe->dvb->priv; + + if (d->props.power_ctrl) + d->props.power_ctrl(d,1); + + if (d->fe_init) + d->fe_init(fe); + + return 0; +} + +static int dvb_usb_fe_sleep(struct dvb_frontend *fe) +{ + struct dvb_usb_device *d = fe->dvb->priv; + + if (d->fe_sleep) + d->fe_sleep(fe); + + if (d->props.power_ctrl) + d->props.power_ctrl(d,0); + + return 0; +} + +int dvb_usb_fe_init(struct dvb_usb_device* d) +{ + if (d->props.frontend_attach == NULL) { + err("strange '%s' don't want to attach a frontend.",d->desc->name); + return 0; + } + + d->props.frontend_attach(d); + + /* re-assign sleep and wakeup functions */ + if (d->fe != NULL) { + d->fe_init = d->fe->ops->init; d->fe->ops->init = dvb_usb_fe_wakeup; + d->fe_sleep = d->fe->ops->sleep; d->fe->ops->sleep = dvb_usb_fe_sleep; + + if (dvb_register_frontend(&d->dvb_adap, d->fe)) { + err("Frontend registration failed."); + if (d->fe->ops->release) + d->fe->ops->release(d->fe); + d->fe = NULL; + return -ENODEV; + } + } else + err("no frontend was attached by '%s'",d->desc->name); + + if (d->props.tuner_attach != NULL) + d->props.tuner_attach(d); + + return 0; +} + +int dvb_usb_fe_exit(struct dvb_usb_device *d) +{ + if (d->fe != NULL) + dvb_unregister_frontend(d->fe); + return 0; +} diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c new file mode 100644 index 000000000000..5244e39770a0 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c @@ -0,0 +1,100 @@ +/* dvb-usb-firmware.c is part of the DVB USB library. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * This file contains functions for downloading the firmware to Cypress FX 1 and 2 based devices. + * + * FIXME: This part does actually not belong to dvb-usb, but to the usb-subsystem. + */ +#include "dvb-usb-common.h" + +#include <linux/firmware.h> +#include <linux/usb.h> + +struct usb_cypress_controller { + int id; + const char *name; /* name of the usb controller */ + u16 cpu_cs_register; /* needs to be restarted, when the firmware has been downloaded. */ +}; + +static struct usb_cypress_controller cypress[] = { + { .id = CYPRESS_AN2135, .name = "Cypress AN2135", .cpu_cs_register = 0x7f92 }, + { .id = CYPRESS_AN2235, .name = "Cypress AN2235", .cpu_cs_register = 0x7f92 }, + { .id = CYPRESS_FX2, .name = "Cypress FX2", .cpu_cs_register = 0xe600 }, +}; + +/* + * load a firmware packet to the device + */ +static int usb_cypress_writemem(struct usb_device *udev,u16 addr,u8 *data, u8 len) +{ + return usb_control_msg(udev, usb_sndctrlpipe(udev,0), + 0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len, 5*HZ); +} + +int usb_cypress_load_firmware(struct usb_device *udev, const char *filename, int type) +{ + const struct firmware *fw = NULL; + u16 addr; + u8 *b,*p; + int ret = 0,i; + + if ((ret = request_firmware(&fw, filename, &udev->dev)) != 0) { + err("did not find the firmware file. (%s) " + "Please see linux/Documentation/dvb/ for more details on firmware-problems.", + filename); + return ret; + } + + info("downloading firmware from file '%s' to the '%s'",filename,cypress[type].name); + + p = kmalloc(fw->size,GFP_KERNEL); + if (p != NULL) { + u8 reset; + /* + * you cannot use the fw->data as buffer for + * usb_control_msg, a new buffer has to be + * created + */ + memcpy(p,fw->data,fw->size); + + /* stop the CPU */ + reset = 1; + if ((ret = usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1)) != 1) + err("could not stop the USB controller CPU."); + for(i = 0; p[i+3] == 0 && i < fw->size; ) { + b = (u8 *) &p[i]; + addr = cpu_to_le16( *((u16 *) &b[1]) ); + + deb_fw("writing to address 0x%04x (buffer: 0x%02x%02x)\n",addr,b[1],b[2]); + + ret = usb_cypress_writemem(udev,addr,&b[4],b[0]); + + if (ret != b[0]) { + err("error while transferring firmware " + "(transferred size: %d, block size: %d)", + ret,b[0]); + ret = -EINVAL; + break; + } + i += 5 + b[0]; + } + /* length in ret */ + if (ret > 0) + ret = 0; + /* restart the CPU */ + reset = 0; + if (ret || usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1) != 1) { + err("could not restart the USB controller CPU."); + ret = -EINVAL; + } + + kfree(p); + } else { + ret = -ENOMEM; + } + release_firmware(fw); + + return ret; +} diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c b/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c new file mode 100644 index 000000000000..9f0a8d90d146 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c @@ -0,0 +1,118 @@ +/* dvb-usb-i2c.c is part of the DVB USB library. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * This file contains functions for (de-)initializing an I2C adapter. + */ +#include "dvb-usb-common.h" + +int dvb_usb_i2c_init(struct dvb_usb_device *d) +{ + int ret = 0; + + if (!(d->props.caps & DVB_USB_IS_AN_I2C_ADAPTER)) + return 0; + + if (d->props.i2c_algo == NULL) { + err("no i2c algorithm specified"); + return -EINVAL; + } + + strncpy(d->i2c_adap.name,d->desc->name,I2C_NAME_SIZE); +#ifdef I2C_ADAP_CLASS_TV_DIGITAL + d->i2c_adap.class = I2C_ADAP_CLASS_TV_DIGITAL, +#else + d->i2c_adap.class = I2C_CLASS_TV_DIGITAL, +#endif + d->i2c_adap.algo = d->props.i2c_algo; + d->i2c_adap.algo_data = NULL; + d->i2c_adap.id = I2C_ALGO_BIT; + + i2c_set_adapdata(&d->i2c_adap, d); + + if ((ret = i2c_add_adapter(&d->i2c_adap)) < 0) + err("could not add i2c adapter"); + + d->state |= DVB_USB_STATE_I2C; + + return ret; +} + +int dvb_usb_i2c_exit(struct dvb_usb_device *d) +{ + if (d->state & DVB_USB_STATE_I2C) + i2c_del_adapter(&d->i2c_adap); + d->state &= ~DVB_USB_STATE_I2C; + return 0; +} + +int dvb_usb_pll_init_i2c(struct dvb_frontend *fe) +{ + struct dvb_usb_device *d = fe->dvb->priv; + struct i2c_msg msg = { .addr = d->pll_addr, .flags = 0, .buf = d->pll_init, .len = 4 }; + int ret = 0; + + /* if there is nothing to initialize */ + if (d->pll_init[0] == 0x00 && d->pll_init[1] == 0x00 && + d->pll_init[2] == 0x00 && d->pll_init[3] == 0x00) + return 0; + + if (d->tuner_pass_ctrl) + d->tuner_pass_ctrl(fe,1,d->pll_addr); + + deb_pll("pll init: %x\n",d->pll_addr); + deb_pll("pll-buf: %x %x %x %x\n",d->pll_init[0],d->pll_init[1], + d->pll_init[2],d->pll_init[3]); + + if (i2c_transfer (&d->i2c_adap, &msg, 1) != 1) { + err("tuner i2c write failed for pll_init."); + ret = -EREMOTEIO; + } + msleep(1); + + if (d->tuner_pass_ctrl) + d->tuner_pass_ctrl(fe,0,d->pll_addr); + return ret; +} +EXPORT_SYMBOL(dvb_usb_pll_init_i2c); + +int dvb_usb_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep, u8 b[5]) +{ + struct dvb_usb_device *d = fe->dvb->priv; + + deb_pll("pll addr: %x, freq: %d %p\n",d->pll_addr,fep->frequency,d->pll_desc); + + b[0] = d->pll_addr << 1; + dvb_pll_configure(d->pll_desc,&b[1],fep->frequency,fep->u.ofdm.bandwidth); + + deb_pll("pll-buf: %x %x %x %x %x\n",b[0],b[1],b[2],b[3],b[4]); + + return 0; +} +EXPORT_SYMBOL(dvb_usb_pll_set); + +int dvb_usb_pll_set_i2c(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep) +{ + struct dvb_usb_device *d = fe->dvb->priv; + int ret = 0; + u8 b[5]; + struct i2c_msg msg = { .addr = d->pll_addr, .flags = 0, .buf = &b[1], .len = 4 }; + + dvb_usb_pll_set(fe,fep,b); + + if (d->tuner_pass_ctrl) + d->tuner_pass_ctrl(fe,1,d->pll_addr); + + if (i2c_transfer (&d->i2c_adap, &msg, 1) != 1) { + err("tuner i2c write failed for pll_set."); + ret = -EREMOTEIO; + } + msleep(1); + + if (d->tuner_pass_ctrl) + d->tuner_pass_ctrl(fe,0,d->pll_addr); + + return ret; +} +EXPORT_SYMBOL(dvb_usb_pll_set_i2c); diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h new file mode 100644 index 000000000000..bcb34191868b --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -0,0 +1,83 @@ +/* dvb-usb-ids.h is part of the DVB USB library. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) see + * dvb-usb-init.c for copyright information. + * + * a header file containing define's for the USB device supported by the + * various drivers. + */ +#ifndef _DVB_USB_IDS_H_ +#define _DVB_USB_IDS_H_ + +/* Vendor IDs */ +#define USB_VID_ADSTECH 0x06e1 +#define USB_VID_ANCHOR 0x0547 +#define USB_VID_AVERMEDIA_UNK 0x14aa +#define USB_VID_AVERMEDIA 0x07ca +#define USB_VID_COMPRO 0x185b +#define USB_VID_COMPRO_UNK 0x145f +#define USB_VID_CYPRESS 0x04b4 +#define USB_VID_DIBCOM 0x10b8 +#define USB_VID_DVICO 0x0fe9 +#define USB_VID_EMPIA 0xeb1a +#define USB_VID_GRANDTEC 0x5032 +#define USB_VID_HANFTEK 0x15f4 +#define USB_VID_HAUPPAUGE 0x2040 +#define USB_VID_HYPER_PALTEK 0x1025 +#define USB_VID_VISIONPLUS 0x13d3 +#define USB_VID_TWINHAN 0x1822 +#define USB_VID_ULTIMA_ELECTRONIC 0x05d8 + +/* Product IDs */ +#define USB_PID_ADSTECH_USB2_COLD 0xa333 +#define USB_PID_ADSTECH_USB2_WARM 0xa334 +#define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 +#define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 +#define USB_PID_AVERMEDIA_DVBT_USB2_COLD 0xa800 +#define USB_PID_AVERMEDIA_DVBT_USB2_WARM 0xa801 +#define USB_PID_COMPRO_DVBU2000_COLD 0xd000 +#define USB_PID_COMPRO_DVBU2000_WARM 0xd001 +#define USB_PID_COMPRO_DVBU2000_UNK_COLD 0x010c +#define USB_PID_COMPRO_DVBU2000_UNK_WARM 0x010d +#define USB_PID_DIBCOM_MOD3000_COLD 0x0bb8 +#define USB_PID_DIBCOM_MOD3000_WARM 0x0bb9 +#define USB_PID_DIBCOM_MOD3001_COLD 0x0bc6 +#define USB_PID_DIBCOM_MOD3001_WARM 0x0bc7 +#define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131 +#define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0 +#define USB_PID_GRANDTEC_DVBT_USB_WARM 0x0fa1 +#define USB_PID_KWORLD_VSTREAM_COLD 0x17de +#define USB_PID_KWORLD_VSTREAM_WARM 0x17df +#define USB_PID_TWINHAN_VP7041_COLD 0x3201 +#define USB_PID_TWINHAN_VP7041_WARM 0x3202 +#define USB_PID_TWINHAN_VP7045_COLD 0x3205 +#define USB_PID_TWINHAN_VP7045_WARM 0x3206 +#define USB_PID_DNTV_TINYUSB2_COLD 0x3223 +#define USB_PID_DNTV_TINYUSB2_WARM 0x3224 +#define USB_PID_TWINHAN_VP7021_COLD 0x3207 +#define USB_PID_TWINHAN_VP7021_WARM 0x3208 +#define USB_PID_ULTIMA_TVBOX_COLD 0x8105 +#define USB_PID_ULTIMA_TVBOX_WARM 0x8106 +#define USB_PID_ULTIMA_TVBOX_AN2235_COLD 0x8107 +#define USB_PID_ULTIMA_TVBOX_AN2235_WARM 0x8108 +#define USB_PID_ULTIMA_TVBOX_ANCHOR_COLD 0x2235 +#define USB_PID_ULTIMA_TVBOX_USB2_COLD 0x8109 +#define USB_PID_ULTIMA_TVBOX_USB2_FX_COLD 0x8613 +#define USB_PID_ULTIMA_TVBOX_USB2_FX_WARM 0x1002 +#define USB_PID_UNK_HYPER_PALTEK_COLD 0x005e +#define USB_PID_UNK_HYPER_PALTEK_WARM 0x005f +#define USB_PID_HANFTEK_UMT_010_COLD 0x0001 +#define USB_PID_HANFTEK_UMT_010_WARM 0x0015 +#define USB_PID_DTT200U_COLD 0x0201 +#define USB_PID_DTT200U_WARM 0x0301 +#define USB_PID_WINTV_NOVA_T_USB2_COLD 0x9300 +#define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301 +#define USB_PID_NEBULA_DIGITV 0x0201 +#define USB_PID_DVICO_BLUEBIRD_LGZ201 0xdb00 +#define USB_PID_DVICO_BLUEBIRD_TH7579 0xdb10 +#define USB_PID_DVICO_BLUEBIRD_LGDT 0xd820 +#define USB_PID_DVICO_BLUEBIRD_LGZ201_1 0xdb01 +#define USB_PID_DVICO_BLUEBIRD_TH7579_2 0xdb11 + + +#endif diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-init.c b/drivers/media/dvb/dvb-usb/dvb-usb-init.c new file mode 100644 index 000000000000..3aadec974cf1 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dvb-usb-init.c @@ -0,0 +1,211 @@ +/* + * DVB USB library - provides a generic interface for a DVB USB device driver. + * + * dvb-usb-init.c + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dvb-usb-common.h" + +/* debug */ +int dvb_usb_debug; +module_param_named(debug,dvb_usb_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64 (or-able))." DVB_USB_DEBUG_STATUS); + +/* general initialization functions */ +int dvb_usb_exit(struct dvb_usb_device *d) +{ + deb_info("state before exiting everything: %x\n",d->state); + dvb_usb_remote_exit(d); + dvb_usb_fe_exit(d); + dvb_usb_i2c_exit(d); + dvb_usb_dvb_exit(d); + dvb_usb_urb_exit(d); + deb_info("state should be zero now: %x\n",d->state); + d->state = DVB_USB_STATE_INIT; + kfree(d->priv); + kfree(d); + return 0; +} + +static int dvb_usb_init(struct dvb_usb_device *d) +{ + int ret = 0; + + sema_init(&d->usb_sem, 1); + sema_init(&d->i2c_sem, 1); + + d->state = DVB_USB_STATE_INIT; + +/* check the capabilites and set appropriate variables */ + +/* speed - when running at FULL speed we need a HW PID filter */ + if (d->udev->speed == USB_SPEED_FULL && !(d->props.caps & DVB_USB_HAS_PID_FILTER)) { + err("This USB2.0 device cannot be run on a USB1.1 port. (it lacks a HW PID filter)"); + return -ENODEV; + } + + if ((d->udev->speed == USB_SPEED_FULL && d->props.caps & DVB_USB_HAS_PID_FILTER) || + (d->props.caps & DVB_USB_NEED_PID_FILTERING)) { + info("will use the device's hw PID filter."); + d->pid_filtering = 1; + d->max_feed_count = d->props.pid_filter_count; + } else { + info("will pass the complete MPEG2 transport stream to the demuxer."); + d->pid_filtering = 0; + d->max_feed_count = 255; + } + + if (d->props.power_ctrl) + d->props.power_ctrl(d,1); + + if ((ret = dvb_usb_urb_init(d)) || + (ret = dvb_usb_dvb_init(d)) || + (ret = dvb_usb_i2c_init(d)) || + (ret = dvb_usb_fe_init(d))) { + dvb_usb_exit(d); + return ret; + } + + if ((ret = dvb_usb_remote_init(d))) + err("could not initialize remote control."); + + if (d->props.power_ctrl) + d->props.power_ctrl(d,0); + + return 0; +} + +/* determine the name and the state of the just found USB device */ +static struct dvb_usb_device_description * dvb_usb_find_device(struct usb_device *udev,struct dvb_usb_properties *props, int *cold) +{ + int i,j; + struct dvb_usb_device_description *desc = NULL; + *cold = -1; + + for (i = 0; i < props->num_device_descs; i++) { + + for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].cold_ids[j] != NULL; j++) { + deb_info("check for cold %x %x\n",props->devices[i].cold_ids[j]->idVendor, props->devices[i].cold_ids[j]->idProduct); + if (props->devices[i].cold_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) && + props->devices[i].cold_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) { + *cold = 1; + desc = &props->devices[i]; + break; + } + } + + if (desc != NULL) + break; + + for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].warm_ids[j] != NULL; j++) { + deb_info("check for warm %x %x\n",props->devices[i].warm_ids[j]->idVendor, props->devices[i].warm_ids[j]->idProduct); + if (props->devices[i].warm_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) && + props->devices[i].warm_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) { + *cold = 0; + desc = &props->devices[i]; + break; + } + } + } + + if (desc != NULL && props->identify_state != NULL) + props->identify_state(udev,props,&desc,cold); + + return desc; +} + +/* + * USB + */ +int dvb_usb_device_init(struct usb_interface *intf, struct dvb_usb_properties *props, struct module *owner) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct dvb_usb_device *d = NULL; + struct dvb_usb_device_description *desc = NULL; + + int ret = -ENOMEM,cold=0; + + if ((desc = dvb_usb_find_device(udev,props,&cold)) == NULL) { + deb_err("something went very wrong, device was not found in current device list - let's see what comes next.\n"); + return -ENODEV; + } + + if (cold) { + info("found a '%s' in cold state, will try to load a firmware",desc->name); + ret = usb_cypress_load_firmware(udev,props->firmware,props->usb_ctrl); + } else { + info("found a '%s' in warm state.",desc->name); + d = kmalloc(sizeof(struct dvb_usb_device),GFP_KERNEL); + if (d == NULL) { + err("no memory for 'struct dvb_usb_device'"); + return ret; + } + memset(d,0,sizeof(struct dvb_usb_device)); + + d->udev = udev; + memcpy(&d->props,props,sizeof(struct dvb_usb_properties)); + d->desc = desc; + d->owner = owner; + + if (d->props.size_of_priv > 0) { + d->priv = kmalloc(d->props.size_of_priv,GFP_KERNEL); + if (d->priv == NULL) { + err("no memory for priv in 'struct dvb_usb_device'"); + kfree(d); + return -ENOMEM; + } + memset(d->priv,0,d->props.size_of_priv); + } + + usb_set_intfdata(intf, d); + + ret = dvb_usb_init(d); + } + + if (ret == 0) + info("%s successfully initialized and connected.",desc->name); + else + info("%s error while loading driver (%d)",desc->name,ret); + return ret; +} +EXPORT_SYMBOL(dvb_usb_device_init); + +void dvb_usb_device_exit(struct usb_interface *intf) +{ + struct dvb_usb_device *d = usb_get_intfdata(intf); + const char *name = "generic DVB-USB module"; + + usb_set_intfdata(intf,NULL); + if (d != NULL && d->desc != NULL) { + name = d->desc->name; + dvb_usb_exit(d); + } + info("%s successfully deinitialized and disconnected.",name); + +} +EXPORT_SYMBOL(dvb_usb_device_exit); + +/* module stuff */ +static int __init dvb_usb_module_init(void) +{ + return 0; +} + +static void __exit dvb_usb_module_exit(void) +{ +} + +module_init (dvb_usb_module_init); +module_exit (dvb_usb_module_exit); + +MODULE_VERSION("0.3"); +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("A library module containing commonly used USB and DVB function USB DVB devices"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c new file mode 100644 index 000000000000..9f1e23f82bae --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c @@ -0,0 +1,175 @@ +/* dvb-usb-remote.c is part of the DVB USB library. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * This file contains functions for initializing the the input-device and for handling remote-control-queries. + */ +#include "dvb-usb-common.h" + +/* Remote-control poll function - called every dib->rc_query_interval ms to see + * whether the remote control has received anything. + * + * TODO: Fix the repeat rate of the input device. + */ +static void dvb_usb_read_remote_control(void *data) +{ + struct dvb_usb_device *d = data; + u32 event; + int state; + + /* TODO: need a lock here. We can simply skip checking for the remote control + if we're busy. */ + + if (d->props.rc_query(d,&event,&state)) { + err("error while querying for an remote control event."); + goto schedule; + } + + + switch (state) { + case REMOTE_NO_KEY_PRESSED: + break; + case REMOTE_KEY_PRESSED: + deb_rc("key pressed\n"); + d->last_event = event; + case REMOTE_KEY_REPEAT: + deb_rc("key repeated\n"); + input_event(&d->rc_input_dev, EV_KEY, event, 1); + input_event(&d->rc_input_dev, EV_KEY, d->last_event, 0); + input_sync(&d->rc_input_dev); + break; + default: + break; + } + +/* improved repeat handling ??? + switch (state) { + case REMOTE_NO_KEY_PRESSED: + deb_rc("NO KEY PRESSED\n"); + if (d->last_state != REMOTE_NO_KEY_PRESSED) { + deb_rc("releasing event %d\n",d->last_event); + input_event(&d->rc_input_dev, EV_KEY, d->last_event, 0); + input_sync(&d->rc_input_dev); + } + d->last_state = REMOTE_NO_KEY_PRESSED; + d->last_event = 0; + break; + case REMOTE_KEY_PRESSED: + deb_rc("KEY PRESSED\n"); + deb_rc("pressing event %d\n",event); + + input_event(&d->rc_input_dev, EV_KEY, event, 1); + input_sync(&d->rc_input_dev); + + d->last_event = event; + d->last_state = REMOTE_KEY_PRESSED; + break; + case REMOTE_KEY_REPEAT: + deb_rc("KEY_REPEAT\n"); + if (d->last_state != REMOTE_NO_KEY_PRESSED) { + deb_rc("repeating event %d\n",d->last_event); + input_event(&d->rc_input_dev, EV_KEY, d->last_event, 2); + input_sync(&d->rc_input_dev); + d->last_state = REMOTE_KEY_REPEAT; + } + default: + break; + } +*/ + +schedule: + schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc_interval)); +} + +int dvb_usb_remote_init(struct dvb_usb_device *d) +{ + int i; + if (d->props.rc_key_map == NULL) + return 0; + + /* Initialise the remote-control structures.*/ + init_input_dev(&d->rc_input_dev); + + d->rc_input_dev.evbit[0] = BIT(EV_KEY); + d->rc_input_dev.keycodesize = sizeof(unsigned char); + d->rc_input_dev.keycodemax = KEY_MAX; + d->rc_input_dev.name = "IR-receiver inside an USB DVB receiver"; + + /* set the bits for the keys */ + deb_rc("key map size: %d\n",d->props.rc_key_map_size); + for (i = 0; i < d->props.rc_key_map_size; i++) { + deb_rc("setting bit for event %d item %d\n",d->props.rc_key_map[i].event, i); + set_bit(d->props.rc_key_map[i].event, d->rc_input_dev.keybit); + } + + /* Start the remote-control polling. */ + if (d->props.rc_interval < 40) + d->props.rc_interval = 100; /* default */ + + /* setting these two values to non-zero, we have to manage key repeats */ + d->rc_input_dev.rep[REP_PERIOD] = d->props.rc_interval; + d->rc_input_dev.rep[REP_DELAY] = d->props.rc_interval + 150; + + input_register_device(&d->rc_input_dev); + + INIT_WORK(&d->rc_query_work, dvb_usb_read_remote_control, d); + + info("schedule remote query interval to %d msecs.",d->props.rc_interval); + schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc_interval)); + + d->state |= DVB_USB_STATE_REMOTE; + + return 0; +} + +int dvb_usb_remote_exit(struct dvb_usb_device *d) +{ + if (d->state & DVB_USB_STATE_REMOTE) { + cancel_delayed_work(&d->rc_query_work); + flush_scheduled_work(); + input_unregister_device(&d->rc_input_dev); + } + d->state &= ~DVB_USB_STATE_REMOTE; + return 0; +} + +#define DVB_USB_RC_NEC_EMPTY 0x00 +#define DVB_USB_RC_NEC_KEY_PRESSED 0x01 +#define DVB_USB_RC_NEC_KEY_REPEATED 0x02 +int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *d, + u8 keybuf[5], u32 *event, int *state) +{ + int i; + struct dvb_usb_rc_key *keymap = d->props.rc_key_map; + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + switch (keybuf[0]) { + case DVB_USB_RC_NEC_EMPTY: + break; + case DVB_USB_RC_NEC_KEY_PRESSED: + if ((u8) ~keybuf[1] != keybuf[2] || + (u8) ~keybuf[3] != keybuf[4]) { + deb_err("remote control checksum failed.\n"); + break; + } + /* See if we can match the raw key code. */ + for (i = 0; i < sizeof(keymap)/sizeof(struct dvb_usb_rc_key); i++) + if (keymap[i].custom == keybuf[1] && + keymap[i].data == keybuf[3]) { + *event = keymap[i].event; + *state = REMOTE_KEY_PRESSED; + break; + } + deb_err("key mapping failed - no appropriate key found in keymapping\n"); + break; + case DVB_USB_RC_NEC_KEY_REPEATED: + *state = REMOTE_KEY_REPEAT; + break; + default: + deb_err("unkown type of remote status: %d\n",keybuf[0]); + break; + } + return 0; +} +EXPORT_SYMBOL(dvb_usb_nec_rc_key_to_event); diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c new file mode 100644 index 000000000000..83d476fb410a --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c @@ -0,0 +1,211 @@ +/* dvb-usb-urb.c is part of the DVB USB library. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * This file contains functions for initializing and handling the + * USB and URB stuff. + */ +#include "dvb-usb-common.h" + +int dvb_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, + u16 rlen, int delay_ms) +{ + int actlen,ret = -ENOMEM; + + if (d->props.generic_bulk_ctrl_endpoint == 0) { + err("endpoint for generic control not specified."); + return -EINVAL; + } + + if (wbuf == NULL || wlen == 0) + return -EINVAL; + + if ((ret = down_interruptible(&d->usb_sem))) + return ret; + + debug_dump(wbuf,wlen,deb_xfer); + + ret = usb_bulk_msg(d->udev,usb_sndbulkpipe(d->udev, + d->props.generic_bulk_ctrl_endpoint), wbuf,wlen,&actlen, + 2*HZ); + + if (ret) + err("bulk message failed: %d (%d/%d)",ret,wlen,actlen); + else + ret = actlen != wlen ? -1 : 0; + + /* an answer is expected, and no error before */ + if (!ret && rbuf && rlen) { + if (delay_ms) + msleep(delay_ms); + + ret = usb_bulk_msg(d->udev,usb_rcvbulkpipe(d->udev, + d->props.generic_bulk_ctrl_endpoint),rbuf,rlen,&actlen, + 2*HZ); + + if (ret) + err("recv bulk message failed: %d",ret); + else + debug_dump(rbuf,actlen,deb_xfer); + } + + up(&d->usb_sem); + return ret; +} +EXPORT_SYMBOL(dvb_usb_generic_rw); + +int dvb_usb_generic_write(struct dvb_usb_device *d, u8 *buf, u16 len) +{ + return dvb_usb_generic_rw(d,buf,len,NULL,0,0); +} +EXPORT_SYMBOL(dvb_usb_generic_write); + +static void dvb_usb_bulk_urb_complete(struct urb *urb, struct pt_regs *ptregs) +{ + struct dvb_usb_device *d = urb->context; + + deb_ts("bulk urb completed. feedcount: %d, status: %d, length: %d\n",d->feedcount,urb->status, + urb->actual_length); + + switch (urb->status) { + case 0: /* success */ + case -ETIMEDOUT: /* NAK */ + break; + case -ECONNRESET: /* kill */ + case -ENOENT: + case -ESHUTDOWN: + return; + default: /* error */ + deb_ts("urb completition error %d.", urb->status); + break; + } + + if (d->feedcount > 0 && urb->actual_length > 0) { + if (d->state & DVB_USB_STATE_DVB) + dvb_dmx_swfilter(&d->demux, (u8*) urb->transfer_buffer,urb->actual_length); + } else + deb_ts("URB dropped because of feedcount.\n"); + + usb_submit_urb(urb,GFP_ATOMIC); +} + +int dvb_usb_urb_kill(struct dvb_usb_device *d) +{ + int i; + for (i = 0; i < d->urbs_submitted; i++) { + deb_info("killing URB no. %d.\n",i); + + /* stop the URB */ + usb_kill_urb(d->urb_list[i]); + } + d->urbs_submitted = 0; + return 0; +} + +int dvb_usb_urb_submit(struct dvb_usb_device *d) +{ + int i,ret; + for (i = 0; i < d->urbs_initialized; i++) { + deb_info("submitting URB no. %d\n",i); + if ((ret = usb_submit_urb(d->urb_list[i],GFP_ATOMIC))) { + err("could not submit URB no. %d - get them all back\n",i); + dvb_usb_urb_kill(d); + return ret; + } + d->urbs_submitted++; + } + return 0; +} + +static int dvb_usb_bulk_urb_init(struct dvb_usb_device *d) +{ + int i,bufsize = d->props.urb.count * d->props.urb.u.bulk.buffersize; + + deb_info("allocate %d bytes as buffersize for all URBs\n",bufsize); + /* allocate the actual buffer for the URBs */ + if ((d->buffer = usb_buffer_alloc(d->udev, bufsize, SLAB_ATOMIC, &d->dma_handle)) == NULL) { + deb_info("not enough memory for urb-buffer allocation.\n"); + return -ENOMEM; + } + deb_info("allocation successful\n"); + memset(d->buffer,0,bufsize); + + d->state |= DVB_USB_STATE_URB_BUF; + + /* allocate the URBs */ + for (i = 0; i < d->props.urb.count; i++) { + if (!(d->urb_list[i] = usb_alloc_urb(0,GFP_ATOMIC))) { + return -ENOMEM; + } + + usb_fill_bulk_urb( d->urb_list[i], d->udev, + usb_rcvbulkpipe(d->udev,d->props.urb.endpoint), + &d->buffer[i*d->props.urb.u.bulk.buffersize], + d->props.urb.u.bulk.buffersize, + dvb_usb_bulk_urb_complete, d); + + d->urb_list[i]->transfer_flags = 0; + d->urbs_initialized++; + } + return 0; +} + +int dvb_usb_urb_init(struct dvb_usb_device *d) +{ + /* + * when reloading the driver w/o replugging the device + * sometimes a timeout occures, this helps + */ + if (d->props.generic_bulk_ctrl_endpoint != 0) { + usb_clear_halt(d->udev,usb_sndbulkpipe(d->udev,d->props.generic_bulk_ctrl_endpoint)); + usb_clear_halt(d->udev,usb_rcvbulkpipe(d->udev,d->props.generic_bulk_ctrl_endpoint)); + } + usb_clear_halt(d->udev,usb_rcvbulkpipe(d->udev,d->props.urb.endpoint)); + + /* allocate the array for the data transfer URBs */ + d->urb_list = kmalloc(d->props.urb.count * sizeof(struct urb *),GFP_KERNEL); + if (d->urb_list == NULL) + return -ENOMEM; + memset(d->urb_list,0,d->props.urb.count * sizeof(struct urb *)); + d->state |= DVB_USB_STATE_URB_LIST; + + switch (d->props.urb.type) { + case DVB_USB_BULK: + return dvb_usb_bulk_urb_init(d); + case DVB_USB_ISOC: + err("isochronous transfer not yet implemented in dvb-usb."); + return -EINVAL; + default: + err("unkown URB-type for data transfer."); + return -EINVAL; + } +} + +int dvb_usb_urb_exit(struct dvb_usb_device *d) +{ + int i; + + dvb_usb_urb_kill(d); + + if (d->state & DVB_USB_STATE_URB_LIST) { + for (i = 0; i < d->urbs_initialized; i++) { + if (d->urb_list[i] != NULL) { + deb_info("freeing URB no. %d.\n",i); + /* free the URBs */ + usb_free_urb(d->urb_list[i]); + } + } + d->urbs_initialized = 0; + /* free the urb array */ + kfree(d->urb_list); + d->state &= ~DVB_USB_STATE_URB_LIST; + } + + if (d->state & DVB_USB_STATE_URB_BUF) + usb_buffer_free(d->udev, d->props.urb.u.bulk.buffersize * d->props.urb.count, + d->buffer, d->dma_handle); + + d->state &= ~DVB_USB_STATE_URB_BUF; + return 0; +} diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h new file mode 100644 index 000000000000..abcee1943f64 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dvb-usb.h @@ -0,0 +1,315 @@ +/* dvb-usb.h is part of the DVB USB library. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * the headerfile, all dvb-usb-drivers have to include. + */ +#ifndef __DVB_USB_H__ +#define __DVB_USB_H__ + +#include <linux/config.h> +#include <linux/input.h> +#include <linux/module.h> +#include <linux/usb.h> + +#include "dvb_frontend.h" +#include "dvb_demux.h" +#include "dvb_net.h" +#include "dmxdev.h" + +#include "dvb-pll.h" + +#include "dvb-usb-ids.h" + +/* debug */ +#ifdef CONFIG_DVB_USB_DEBUG +#define dprintk(var,level,args...) \ + do { if ((var & level)) { printk(args); } } while (0) + +#define debug_dump(b,l,func) {\ + int loop_; \ + for (loop_ = 0; loop_ < l; loop_++) func("%02x ", b[loop_]); \ + func("\n");\ +} +#define DVB_USB_DEBUG_STATUS +#else +#define dprintk(args...) +#define debug_dump(b,l,func) + +#define DVB_USB_DEBUG_STATUS " (debugging is not enabled)" + +#endif + +/* generic log methods - taken from usb.h */ +#ifndef DVB_USB_LOG_PREFIX + #define DVB_USB_LOG_PREFIX "dvb-usb (please define a log prefix)" +#endif + +#undef err +#define err(format, arg...) printk(KERN_ERR DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) +#undef info +#define info(format, arg...) printk(KERN_INFO DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) +#undef warn +#define warn(format, arg...) printk(KERN_WARNING DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) + +/** + * struct dvb_usb_device_description - name and its according USB IDs + * @name: real name of the box, regardless which DVB USB device class is in use + * @cold_ids: array of struct usb_device_id which describe the device in + * pre-firmware state + * @warm_ids: array of struct usb_device_id which describe the device in + * post-firmware state + * + * Each DVB USB device class can have one or more actual devices, this struct + * assigns a name to it. + */ +struct dvb_usb_device_description { + const char *name; + +#define DVB_USB_ID_MAX_NUM 15 + struct usb_device_id *cold_ids[DVB_USB_ID_MAX_NUM]; + struct usb_device_id *warm_ids[DVB_USB_ID_MAX_NUM]; +}; + +/** + * struct dvb_usb_rc_key - a remote control key and its input-event + * @custom: the vendor/custom part of the key + * @data: the actual key part + * @event: the input event assigned to key identified by custom and data + */ +struct dvb_usb_rc_key { + u8 custom,data; + u32 event; +}; + +struct dvb_usb_device; + +/** + * struct dvb_usb_properties - properties of a dvb-usb-device + * @caps: capabilites of the DVB USB device. + * @pid_filter_count: number of PID filter position in the optional hardware + * PID-filter. + * + * @usb_ctrl: which USB device-side controller is in use. Needed for firmware + * download. + * @firmware: name of the firmware file. + * + * @size_of_priv: how many bytes shall be allocated for the private field + * of struct dvb_usb_device. + * + * @power_ctrl: called to enable/disable power of the device. + * @streaming_crtl: called to start and stop the MPEG2-TS streaming of the + * device (not URB submitting/killing). + * @pid_filter_ctrl: called to en/disable the PID filter, if any. + * @pid_filter: called to set/unset a PID for filtering. + * + * @read_mac_address: called to read the MAC address of the device. + * + * @frontend_attach: called to attach the possible frontends (fill fe-field + * of struct dvb_usb_device). + * @tuner_attach: called to attach the correct tuner and to fill pll_addr, + * pll_desc and pll_init_buf of struct dvb_usb_device). + * @identify_state: called to determine the state (cold or warm), when it + * is not distinguishable by the USB IDs. + * + * @rc_key_map: a hard-wired array of struct dvb_usb_rc_key (NULL to disable + * remote control handling). + * @rc_key_map_size: number of items in @rc_key_map. + * @rc_query: called to query an event event. + * @rc_interval: time in ms between two queries. + * + * @i2c_algo: i2c_algorithm if the device has I2CoverUSB. + * + * @generic_bulk_ctrl_endpoint: most of the DVB USB devices have a generic + * endpoint which received control messages with bulk transfers. When this + * is non-zero, one can use dvb_usb_generic_rw and dvb_usb_generic_write- + * helper functions. + * + * @urb: describes the kind of USB transfer used for MPEG2-TS-streaming. + * Currently only BULK is implemented + * + * @num_device_descs: number of struct dvb_usb_device_description in @devices + * @devices: array of struct dvb_usb_device_description compatibles with these + * properties. + */ +struct dvb_usb_properties { + +#define DVB_USB_HAS_PID_FILTER 0x01 +#define DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF 0x02 +#define DVB_USB_NEED_PID_FILTERING 0x04 +#define DVB_USB_IS_AN_I2C_ADAPTER 0x08 + int caps; + int pid_filter_count; + +#define CYPRESS_AN2135 0 +#define CYPRESS_AN2235 1 +#define CYPRESS_FX2 2 + int usb_ctrl; + const char *firmware; + + int size_of_priv; + + int (*power_ctrl) (struct dvb_usb_device *, int); + int (*streaming_ctrl) (struct dvb_usb_device *, int); + int (*pid_filter_ctrl) (struct dvb_usb_device *, int); + int (*pid_filter) (struct dvb_usb_device *, int, u16, int); + + int (*read_mac_address) (struct dvb_usb_device *, u8 []); + int (*frontend_attach) (struct dvb_usb_device *); + int (*tuner_attach) (struct dvb_usb_device *); + + int (*identify_state) (struct usb_device *, struct dvb_usb_properties *, + struct dvb_usb_device_description **, int *); + +/* remote control properties */ +#define REMOTE_NO_KEY_PRESSED 0x00 +#define REMOTE_KEY_PRESSED 0x01 +#define REMOTE_KEY_REPEAT 0x02 + struct dvb_usb_rc_key *rc_key_map; + int rc_key_map_size; + int (*rc_query) (struct dvb_usb_device *, u32 *, int *); + int rc_interval; + + struct i2c_algorithm *i2c_algo; + + int generic_bulk_ctrl_endpoint; + + struct { +#define DVB_USB_BULK 1 +#define DVB_USB_ISOC 2 + int type; + int count; + int endpoint; + + union { + struct { + int buffersize; /* per URB */ + } bulk; + struct { + int framesperurb; + int framesize; + } isoc; + } u; + } urb; + + int num_device_descs; + struct dvb_usb_device_description devices[8]; +}; + + +/** + * struct dvb_usb_device - object of a DVB USB device + * @props: copy of the struct dvb_usb_properties this device belongs to. + * @desc: pointer to the device's struct dvb_usb_device_description. + * @state: initialization and runtime state of the device. + * + * @udev: pointer to the device's struct usb_device. + * @urb_list: array of dynamically allocated struct urb for the MPEG2-TS- + * streaming. + * @buffer: buffer used to streaming. + * @dma_handle: dma_addr_t for buffer. + * @urbs_initialized: number of URBs initialized. + * @urbs_submitted: number of URBs submitted. + * @feedcount: number of reqested feeds (used for streaming-activation) + * @pid_filtering: is hardware pid_filtering used or not. + * @usb_sem: semaphore of USB control messages (reading needs two messages) + * @i2c_sem: semaphore for i2c-transfers + * @i2c_adap: device's i2c_adapter if it uses I2CoverUSB + * @pll_addr: I2C address of the tuner for programming + * @pll_init: array containing the initialization buffer + * @pll_desc: pointer to the appropriate struct dvb_pll_desc + * @tuner_pass_ctrl: called to (de)activate tuner passthru of the demod + * @dvb_adap: device's dvb_adapter. + * @dmxdev: device's dmxdev. + * @demux: device's software demuxer. + * @dvb_net: device's dvb_net interfaces. + * @dvb_frontend: device's frontend. + * @max_feed_count: how many feeds can be handled simultaneously by this + * device + * @fe_sleep: rerouted frontend-sleep function. + * @fe_init: rerouted frontend-init (wakeup) function. + * @rc_input_dev: input device for the remote control. + * @rc_query_work: struct work_struct frequent rc queries + * @last_event: last triggered event + * @last_state: last state (no, pressed, repeat) + * @owner: owner of the dvb_adapter + * @priv: private data of the actual driver (allocate by dvb-usb, size defined + * in size_of_priv of dvb_usb_properties). + */ +struct dvb_usb_device { + struct dvb_usb_properties props; + struct dvb_usb_device_description *desc; + +#define DVB_USB_STATE_INIT 0x000 +#define DVB_USB_STATE_URB_LIST 0x001 +#define DVB_USB_STATE_URB_BUF 0x002 +#define DVB_USB_STATE_DVB 0x004 +#define DVB_USB_STATE_I2C 0x008 +#define DVB_USB_STATE_REMOTE 0x010 +#define DVB_USB_STATE_URB_SUBMIT 0x020 + int state; + + /* usb */ + struct usb_device *udev; + struct urb **urb_list; + u8 *buffer; + dma_addr_t dma_handle; + int urbs_initialized; + int urbs_submitted; + + int feedcount; + int pid_filtering; + + /* locking */ + struct semaphore usb_sem; + + /* i2c */ + struct semaphore i2c_sem; + struct i2c_adapter i2c_adap; + + /* tuner programming information */ + u8 pll_addr; + u8 pll_init[4]; + struct dvb_pll_desc *pll_desc; + int (*tuner_pass_ctrl)(struct dvb_frontend *, int, u8); + + /* dvb */ + struct dvb_adapter dvb_adap; + struct dmxdev dmxdev; + struct dvb_demux demux; + struct dvb_net dvb_net; + struct dvb_frontend* fe; + int max_feed_count; + + int (*fe_sleep) (struct dvb_frontend *); + int (*fe_init) (struct dvb_frontend *); + + /* remote control */ + struct input_dev rc_input_dev; + struct work_struct rc_query_work; + u32 last_event; + int last_state; + + struct module *owner; + + void *priv; +}; + +extern int dvb_usb_device_init(struct usb_interface *, struct dvb_usb_properties *, struct module *); +extern void dvb_usb_device_exit(struct usb_interface *); + +/* the generic read/write method for device control */ +extern int dvb_usb_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16,int); +extern int dvb_usb_generic_write(struct dvb_usb_device *, u8 *, u16); + +/* commonly used remote control parsing */ +extern int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *, u8[], u32 *, int *); + +/* commonly used pll init and set functions */ +extern int dvb_usb_pll_init_i2c(struct dvb_frontend *); +extern int dvb_usb_pll_set(struct dvb_frontend *, struct dvb_frontend_parameters *, u8[]); +extern int dvb_usb_pll_set_i2c(struct dvb_frontend *, struct dvb_frontend_parameters *); + + +#endif diff --git a/drivers/media/dvb/dvb-usb/nova-t-usb2.c b/drivers/media/dvb/dvb-usb/nova-t-usb2.c new file mode 100644 index 000000000000..9d83781aef95 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/nova-t-usb2.c @@ -0,0 +1,236 @@ +/* DVB USB framework compliant Linux driver for the Hauppauge WinTV-NOVA-T usb2 + * DVB-T receiver. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dibusb.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=rc,2=eeprom (|-able))." DVB_USB_DEBUG_STATUS); + +#define deb_rc(args...) dprintk(debug,0x01,args) +#define deb_ee(args...) dprintk(debug,0x02,args) + +/* Hauppauge NOVA-T USB2 keys */ +static struct dvb_usb_rc_key haupp_rc_keys [] = { + { 0x1e, 0x00, KEY_0 }, + { 0x1e, 0x01, KEY_1 }, + { 0x1e, 0x02, KEY_2 }, + { 0x1e, 0x03, KEY_3 }, + { 0x1e, 0x04, KEY_4 }, + { 0x1e, 0x05, KEY_5 }, + { 0x1e, 0x06, KEY_6 }, + { 0x1e, 0x07, KEY_7 }, + { 0x1e, 0x08, KEY_8 }, + { 0x1e, 0x09, KEY_9 }, + { 0x1e, 0x0a, KEY_KPASTERISK }, + { 0x1e, 0x0b, KEY_RED }, + { 0x1e, 0x0c, KEY_RADIO }, + { 0x1e, 0x0d, KEY_MENU }, + { 0x1e, 0x0e, KEY_GRAVE }, /* # */ + { 0x1e, 0x0f, KEY_MUTE }, + { 0x1e, 0x10, KEY_VOLUMEUP }, + { 0x1e, 0x11, KEY_VOLUMEDOWN }, + { 0x1e, 0x12, KEY_CHANNEL }, + { 0x1e, 0x14, KEY_UP }, + { 0x1e, 0x15, KEY_DOWN }, + { 0x1e, 0x16, KEY_LEFT }, + { 0x1e, 0x17, KEY_RIGHT }, + { 0x1e, 0x18, KEY_VIDEO }, + { 0x1e, 0x19, KEY_AUDIO }, + { 0x1e, 0x1a, KEY_MEDIA }, + { 0x1e, 0x1b, KEY_EPG }, + { 0x1e, 0x1c, KEY_TV }, + { 0x1e, 0x1e, KEY_NEXT }, + { 0x1e, 0x1f, KEY_BACK }, + { 0x1e, 0x20, KEY_CHANNELUP }, + { 0x1e, 0x21, KEY_CHANNELDOWN }, + { 0x1e, 0x24, KEY_LAST }, /* Skip backwards */ + { 0x1e, 0x25, KEY_OK }, + { 0x1e, 0x29, KEY_BLUE}, + { 0x1e, 0x2e, KEY_GREEN }, + { 0x1e, 0x30, KEY_PAUSE }, + { 0x1e, 0x32, KEY_REWIND }, + { 0x1e, 0x34, KEY_FASTFORWARD }, + { 0x1e, 0x35, KEY_PLAY }, + { 0x1e, 0x36, KEY_STOP }, + { 0x1e, 0x37, KEY_RECORD }, + { 0x1e, 0x38, KEY_YELLOW }, + { 0x1e, 0x3b, KEY_GOTO }, + { 0x1e, 0x3d, KEY_POWER }, +}; + +/* Firmware bug? sometimes, when a new key is pressed, the previous pressed key + * is delivered. No workaround yet, maybe a new firmware. + */ +static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 key[5],cmd[2] = { DIBUSB_REQ_POLL_REMOTE, 0x35 }, data,toggle,custom; + u16 raw; + int i; + struct dibusb_state *st = d->priv; + + dvb_usb_generic_rw(d,cmd,2,key,5,0); + + *state = REMOTE_NO_KEY_PRESSED; + switch (key[0]) { + case DIBUSB_RC_HAUPPAUGE_KEY_PRESSED: + raw = ((key[1] << 8) | key[2]) >> 3; + toggle = !!(raw & 0x800); + data = raw & 0x3f; + custom = (raw >> 6) & 0x1f; + + deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to c: %02x d: %02x toggle: %d\n",key[1],key[2],key[3],custom,data,toggle); + + for (i = 0; i < ARRAY_SIZE(haupp_rc_keys); i++) { + deb_rc("c: %x, d: %x\n",haupp_rc_keys[i].data,haupp_rc_keys[i].custom); + if (haupp_rc_keys[i].data == data && + haupp_rc_keys[i].custom == custom) { + *event = haupp_rc_keys[i].event; + *state = REMOTE_KEY_PRESSED; + if (st->old_toggle == toggle) { + if (st->last_repeat_count++ < 2) + *state = REMOTE_NO_KEY_PRESSED; + } else { + st->last_repeat_count = 0; + st->old_toggle = toggle; + } + break; + } + } + + break; + case DIBUSB_RC_HAUPPAUGE_KEY_EMPTY: + default: + break; + } + + return 0; +} + +static int nova_t_read_mac_address (struct dvb_usb_device *d, u8 mac[6]) +{ + int i; + u8 b; + + mac[0] = 0x00; + mac[1] = 0x0d; + mac[2] = 0xfe; + + /* this is a complete guess, but works for my box */ + for (i = 136; i < 139; i++) { + dibusb_read_eeprom_byte(d,i, &b); + + mac[5 - (i - 136)] = b; + +/* deb_ee("%02x ",b); + if ((i+1) % 16 == 0) + deb_ee("\n");*/ + } + + return 0; +} + +/* USB Driver stuff */ +static struct dvb_usb_properties nova_t_properties; + +static int nova_t_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf,&nova_t_properties,THIS_MODULE); +} + +/* do not change the order of the ID table */ +static struct usb_device_id nova_t_table [] = { +/* 00 */ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_WINTV_NOVA_T_USB2_COLD) }, +/* 01 */ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_WINTV_NOVA_T_USB2_WARM) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, nova_t_table); + +static struct dvb_usb_properties nova_t_properties = { + .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_IS_AN_I2C_ADAPTER, + .pid_filter_count = 32, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-nova-t-usb2-01.fw", + + .size_of_priv = sizeof(struct dibusb_state), + + .streaming_ctrl = dibusb2_0_streaming_ctrl, + .pid_filter = dibusb_pid_filter, + .pid_filter_ctrl = dibusb_pid_filter_ctrl, + .power_ctrl = dibusb2_0_power_ctrl, + .frontend_attach = dibusb_dib3000mc_frontend_attach, + .tuner_attach = dibusb_dib3000mc_tuner_attach, + .read_mac_address = nova_t_read_mac_address, + + .rc_interval = 100, + .rc_key_map = haupp_rc_keys, + .rc_key_map_size = ARRAY_SIZE(haupp_rc_keys), + .rc_query = nova_t_rc_query, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x06, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 1, + .devices = { + { "Hauppauge WinTV-NOVA-T usb2", + { &nova_t_table[0], NULL }, + { &nova_t_table[1], NULL }, + }, + } +}; + +static struct usb_driver nova_t_driver = { + .owner = THIS_MODULE, + .name = "Hauppauge WinTV-NOVA-T usb2", + .probe = nova_t_probe, + .disconnect = dvb_usb_device_exit, + .id_table = nova_t_table, +}; + +/* module stuff */ +static int __init nova_t_module_init(void) +{ + int result; + if ((result = usb_register(&nova_t_driver))) { + err("usb_register failed. Error number %d",result); + return result; + } + + return 0; +} + +static void __exit nova_t_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&nova_t_driver); +} + +module_init (nova_t_module_init); +module_exit (nova_t_module_exit); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Hauppauge WinTV-NOVA-T usb2"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/umt-010.c b/drivers/media/dvb/dvb-usb/umt-010.c new file mode 100644 index 000000000000..aa560422ce7c --- /dev/null +++ b/drivers/media/dvb/dvb-usb/umt-010.c @@ -0,0 +1,162 @@ +/* DVB USB framework compliant Linux driver for the HanfTek UMT-010 USB2.0 + * DVB-T receiver. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dibusb.h" + +#include "mt352.h" + +static int umt_mt352_demod_init(struct dvb_frontend *fe) +{ + static u8 mt352_clock_config[] = { 0x89, 0xb8, 0x2d }; + static u8 mt352_reset[] = { 0x50, 0x80 }; + static u8 mt352_mclk_ratio[] = { 0x8b, 0x00 }; + static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0x40 }; + static u8 mt352_agc_cfg[] = { 0x67, 0x10, 0xa0 }; + + static u8 mt352_sec_agc_cfg1[] = { 0x6a, 0xff }; + static u8 mt352_sec_agc_cfg2[] = { 0x6d, 0xff }; + static u8 mt352_sec_agc_cfg3[] = { 0x70, 0x40 }; + static u8 mt352_sec_agc_cfg4[] = { 0x7b, 0x03 }; + static u8 mt352_sec_agc_cfg5[] = { 0x7d, 0x0f }; + + static u8 mt352_acq_ctl[] = { 0x53, 0x50 }; + static u8 mt352_input_freq_1[] = { 0x56, 0x31, 0x06 }; + + mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); + udelay(2000); + mt352_write(fe, mt352_reset, sizeof(mt352_reset)); + mt352_write(fe, mt352_mclk_ratio, sizeof(mt352_mclk_ratio)); + + mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); + mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); + + mt352_write(fe, mt352_sec_agc_cfg1, sizeof(mt352_sec_agc_cfg1)); + mt352_write(fe, mt352_sec_agc_cfg2, sizeof(mt352_sec_agc_cfg2)); + mt352_write(fe, mt352_sec_agc_cfg3, sizeof(mt352_sec_agc_cfg3)); + mt352_write(fe, mt352_sec_agc_cfg4, sizeof(mt352_sec_agc_cfg4)); + mt352_write(fe, mt352_sec_agc_cfg5, sizeof(mt352_sec_agc_cfg5)); + + mt352_write(fe, mt352_acq_ctl, sizeof(mt352_acq_ctl)); + mt352_write(fe, mt352_input_freq_1, sizeof(mt352_input_freq_1)); + + return 0; +} + +static int umt_mt352_frontend_attach(struct dvb_usb_device *d) +{ + struct mt352_config umt_config; + + memset(&umt_config,0,sizeof(struct mt352_config)); + umt_config.demod_init = umt_mt352_demod_init; + umt_config.demod_address = 0xf; + umt_config.pll_set = dvb_usb_pll_set; + + d->fe = mt352_attach(&umt_config, &d->i2c_adap); + + return 0; +} + +static int umt_tuner_attach (struct dvb_usb_device *d) +{ + d->pll_addr = 0x61; + d->pll_desc = &dvb_pll_tua6034; + return 0; +} + +/* USB Driver stuff */ +static struct dvb_usb_properties umt_properties; + +static int umt_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + if (dvb_usb_device_init(intf,&umt_properties,THIS_MODULE) == 0) + return 0; + return -EINVAL; +} + +/* do not change the order of the ID table */ +static struct usb_device_id umt_table [] = { +/* 00 */ { USB_DEVICE(USB_VID_HANFTEK, USB_PID_HANFTEK_UMT_010_COLD) }, +/* 01 */ { USB_DEVICE(USB_VID_HANFTEK, USB_PID_HANFTEK_UMT_010_WARM) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, umt_table); + +static struct dvb_usb_properties umt_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-umt-010-02.fw", + + .size_of_priv = sizeof(struct dibusb_state), + + .streaming_ctrl = dibusb2_0_streaming_ctrl, + .power_ctrl = dibusb_power_ctrl, + .frontend_attach = umt_mt352_frontend_attach, + .tuner_attach = umt_tuner_attach, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 20, + .endpoint = 0x06, + .u = { + .bulk = { + .buffersize = 512, + } + } + }, + + .num_device_descs = 1, + .devices = { + { "Hanftek UMT-010 DVB-T USB2.0", + { &umt_table[0], NULL }, + { &umt_table[1], NULL }, + }, + } +}; + +static struct usb_driver umt_driver = { + .owner = THIS_MODULE, + .name = "HanfTek UMT-010 USB2.0 DVB-T devices", + .probe = umt_probe, + .disconnect = dvb_usb_device_exit, + .id_table = umt_table, +}; + +/* module stuff */ +static int __init umt_module_init(void) +{ + int result; + if ((result = usb_register(&umt_driver))) { + err("usb_register failed. Error number %d",result); + return result; + } + + return 0; +} + +static void __exit umt_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&umt_driver); +} + +module_init (umt_module_init); +module_exit (umt_module_exit); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Driver for HanfTek UMT 010 USB2.0 DVB-T device"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/vp7045-fe.c b/drivers/media/dvb/dvb-usb/vp7045-fe.c new file mode 100644 index 000000000000..2746edfeccba --- /dev/null +++ b/drivers/media/dvb/dvb-usb/vp7045-fe.c @@ -0,0 +1,196 @@ +/* DVB frontend part of the Linux driver for TwinhanDTV Alpha/MagicBoxII USB2.0 + * DVB-T receiver. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * Thanks to Twinhan who kindly provided hardware and information. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + * + */ +#include "vp7045.h" + +/* It is a Zarlink MT352 within a Samsung Tuner (DNOS404ZH102A) - 040929 - AAT + * + * Programming is hidden inside the firmware, so set_frontend is very easy. + * Even though there is a Firmware command that one can use to access the demod + * via its registers. This is used for status information. + */ + +struct vp7045_fe_state { + struct dvb_frontend fe; + struct dvb_usb_device *d; +}; + + +static int vp7045_fe_read_status(struct dvb_frontend* fe, fe_status_t *status) +{ + struct vp7045_fe_state *state = fe->demodulator_priv; + u8 s0 = vp7045_read_reg(state->d,0x00), + s1 = vp7045_read_reg(state->d,0x01), + s3 = vp7045_read_reg(state->d,0x03); + + *status = 0; + if (s0 & (1 << 4)) + *status |= FE_HAS_CARRIER; + if (s0 & (1 << 1)) + *status |= FE_HAS_VITERBI; + if (s0 & (1 << 5)) + *status |= FE_HAS_LOCK; + if (s1 & (1 << 1)) + *status |= FE_HAS_SYNC; + if (s3 & (1 << 6)) + *status |= FE_HAS_SIGNAL; + + if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) != + (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) + *status &= ~FE_HAS_LOCK; + + return 0; +} + +static int vp7045_fe_read_ber(struct dvb_frontend* fe, u32 *ber) +{ + struct vp7045_fe_state *state = fe->demodulator_priv; + *ber = (vp7045_read_reg(state->d, 0x0D) << 16) | + (vp7045_read_reg(state->d, 0x0E) << 8) | + vp7045_read_reg(state->d, 0x0F); + return 0; +} + +static int vp7045_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) +{ + struct vp7045_fe_state *state = fe->demodulator_priv; + *unc = (vp7045_read_reg(state->d, 0x10) << 8) | + vp7045_read_reg(state->d, 0x11); + return 0; +} + +static int vp7045_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) +{ + struct vp7045_fe_state *state = fe->demodulator_priv; + u16 signal = (vp7045_read_reg(state->d, 0x14) << 8) | + vp7045_read_reg(state->d, 0x15); + + *strength = ~signal; + return 0; +} + +static int vp7045_fe_read_snr(struct dvb_frontend* fe, u16 *snr) +{ + struct vp7045_fe_state *state = fe->demodulator_priv; + u8 _snr = vp7045_read_reg(state->d, 0x09); + *snr = (_snr << 8) | _snr; + return 0; +} + +static int vp7045_fe_init(struct dvb_frontend* fe) +{ + return 0; +} + +static int vp7045_fe_sleep(struct dvb_frontend* fe) +{ + return 0; +} + +static int vp7045_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 800; + return 0; +} + +static int vp7045_fe_set_frontend(struct dvb_frontend* fe, + struct dvb_frontend_parameters *fep) +{ + struct vp7045_fe_state *state = fe->demodulator_priv; + u8 buf[5]; + u32 freq = fep->frequency / 1000; + + buf[0] = (freq >> 16) & 0xff; + buf[1] = (freq >> 8) & 0xff; + buf[2] = freq & 0xff; + buf[3] = 0; + + switch (fep->u.ofdm.bandwidth) { + case BANDWIDTH_8_MHZ: buf[4] = 8; break; + case BANDWIDTH_7_MHZ: buf[4] = 7; break; + case BANDWIDTH_6_MHZ: buf[4] = 6; break; + case BANDWIDTH_AUTO: return -EOPNOTSUPP; + default: + return -EINVAL; + } + + vp7045_usb_op(state->d,LOCK_TUNER_COMMAND,buf,5,NULL,0,200); + return 0; +} + +static int vp7045_fe_get_frontend(struct dvb_frontend* fe, + struct dvb_frontend_parameters *fep) +{ + return 0; +} + +static void vp7045_fe_release(struct dvb_frontend* fe) +{ + struct vp7045_fe_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops vp7045_fe_ops; + +struct dvb_frontend * vp7045_fe_attach(struct dvb_usb_device *d) +{ + struct vp7045_fe_state *s = kmalloc(sizeof(struct vp7045_fe_state), GFP_KERNEL); + if (s == NULL) + goto error; + memset(s,0,sizeof(struct vp7045_fe_state)); + + s->d = d; + s->fe.ops = &vp7045_fe_ops; + s->fe.demodulator_priv = s; + + goto success; +error: + return NULL; +success: + return &s->fe; +} + + +static struct dvb_frontend_ops vp7045_fe_ops = { + .info = { + .name = "Twinhan VP7045/46 USB DVB-T", + .type = FE_OFDM, + .frequency_min = 44250000, + .frequency_max = 867250000, + .frequency_stepsize = 1000, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_RECOVER | + FE_CAN_HIERARCHY_AUTO, + }, + + .release = vp7045_fe_release, + + .init = vp7045_fe_init, + .sleep = vp7045_fe_sleep, + + .set_frontend = vp7045_fe_set_frontend, + .get_frontend = vp7045_fe_get_frontend, + .get_tune_settings = vp7045_fe_get_tune_settings, + + .read_status = vp7045_fe_read_status, + .read_ber = vp7045_fe_read_ber, + .read_signal_strength = vp7045_fe_read_signal_strength, + .read_snr = vp7045_fe_read_snr, + .read_ucblocks = vp7045_fe_read_unc_blocks, +}; diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/dvb/dvb-usb/vp7045.c new file mode 100644 index 000000000000..02ecc9a8e3b6 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/vp7045.c @@ -0,0 +1,263 @@ +/* DVB USB compliant Linux driver for the + * - TwinhanDTV Alpha/MagicBoxII USB2.0 DVB-T receiver + * - DigitalNow TinyUSB2 DVB-t receiver + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * Thanks to Twinhan who kindly provided hardware and information. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "vp7045.h" + +/* debug */ +int dvb_usb_vp7045_debug; +module_param_named(debug,dvb_usb_vp7045_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); + +int vp7045_usb_op(struct dvb_usb_device *d, u8 cmd, u8 *out, int outlen, u8 *in, int inlen, int msec) +{ + int ret = 0; + u8 inbuf[12] = { 0 }, outbuf[20] = { 0 }; + + outbuf[0] = cmd; + + if (outlen > 19) + outlen = 19; + + if (inlen > 11) + inlen = 11; + + if (out != NULL && outlen > 0) + memcpy(&outbuf[1], out, outlen); + + deb_xfer("out buffer: "); + debug_dump(outbuf,outlen+1,deb_xfer); + + if ((ret = down_interruptible(&d->usb_sem))) + return ret; + + if (usb_control_msg(d->udev, + usb_sndctrlpipe(d->udev,0), + TH_COMMAND_OUT, USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, + outbuf, 20, 2*HZ) != 20) { + err("USB control message 'out' went wrong."); + ret = -EIO; + goto unlock; + } + + msleep(msec); + + if (usb_control_msg(d->udev, + usb_rcvctrlpipe(d->udev,0), + TH_COMMAND_IN, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, + inbuf, 12, 2*HZ) != 12) { + err("USB control message 'in' went wrong."); + ret = -EIO; + goto unlock; + } + + deb_xfer("in buffer: "); + debug_dump(inbuf,12,deb_xfer); + + if (in != NULL && inlen > 0) + memcpy(in,&inbuf[1],inlen); + +unlock: + up(&d->usb_sem); + + return ret; +} + +u8 vp7045_read_reg(struct dvb_usb_device *d, u8 reg) +{ + u8 obuf[2] = { 0 },v; + obuf[1] = reg; + + vp7045_usb_op(d,TUNER_REG_READ,obuf,2,&v,1,30); + + return v; +} + +static int vp7045_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 v = onoff; + return vp7045_usb_op(d,SET_TUNER_POWER,&v,1,NULL,0,150); +} + +/* remote control stuff */ + +/* The keymapping struct. Somehow this should be loaded to the driver, but + * currently it is hardcoded. */ +static struct dvb_usb_rc_key vp7045_rc_keys[] = { + /* insert the keys like this. to make the raw keys visible, enable + * debug=0x04 when loading dvb-usb-vp7045. */ + + /* these keys are probably wrong. I don't have a working IR-receiver on my + * vp7045, so I can't test it. Patches are welcome. */ + { 0x00, 0x01, KEY_1 }, + { 0x00, 0x02, KEY_2 }, +}; + +static int vp7045_rc_query(struct dvb_usb_device *d, u32 *key_buf, int *state) +{ + u8 key; + int i; + vp7045_usb_op(d,RC_VAL_READ,NULL,0,&key,1,20); + + deb_rc("remote query key: %x %d\n",key,key); + + if (key == 0x44) { + *state = REMOTE_NO_KEY_PRESSED; + return 0; + } + + for (i = 0; i < sizeof(vp7045_rc_keys)/sizeof(struct dvb_usb_rc_key); i++) + if (vp7045_rc_keys[i].data == key) { + *state = REMOTE_KEY_PRESSED; + *key_buf = vp7045_rc_keys[i].event; + break; + } + return 0; +} + +static int vp7045_read_eeprom(struct dvb_usb_device *d,u8 *buf, int len, int offset) +{ + int i = 0; + u8 v,br[2]; + for (i=0; i < len; i++) { + v = offset + i; + vp7045_usb_op(d,GET_EE_VALUE,&v,1,br,2,5); + buf[i] = br[1]; + } + deb_info("VP7045 EEPROM read (offs: %d, len: %d) : ",offset, i); + debug_dump(buf,i,deb_info); + return 0; +} + + +static int vp7045_read_mac_addr(struct dvb_usb_device *d,u8 mac[6]) +{ + return vp7045_read_eeprom(d,mac, 6, MAC_0_ADDR); +} + +static int vp7045_frontend_attach(struct dvb_usb_device *d) +{ + u8 buf[255] = { 0 }; + + vp7045_usb_op(d,VENDOR_STRING_READ,NULL,0,buf,20,0); + buf[10] = '\0'; + deb_info("firmware says: %s ",buf); + + vp7045_usb_op(d,PRODUCT_STRING_READ,NULL,0,buf,20,0); + buf[10] = '\0'; + deb_info("%s ",buf); + + vp7045_usb_op(d,FW_VERSION_READ,NULL,0,buf,20,0); + buf[10] = '\0'; + deb_info("v%s\n",buf); + +/* Dump the EEPROM */ +/* vp7045_read_eeprom(d,buf, 255, FX2_ID_ADDR); */ + + d->fe = vp7045_fe_attach(d); + + return 0; +} + +static struct dvb_usb_properties vp7045_properties; + +static int vp7045_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf,&vp7045_properties,THIS_MODULE); +} + +static struct usb_device_id vp7045_usb_table [] = { + { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7045_COLD) }, + { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7045_WARM) }, + { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_DNTV_TINYUSB2_COLD) }, + { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_DNTV_TINYUSB2_WARM) }, + { 0 }, +}; +MODULE_DEVICE_TABLE(usb, vp7045_usb_table); + +static struct dvb_usb_properties vp7045_properties = { + .caps = 0, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-vp7045-01.fw", + + .power_ctrl = vp7045_power_ctrl, + .frontend_attach = vp7045_frontend_attach, + .read_mac_address = vp7045_read_mac_addr, + + .rc_interval = 400, + .rc_key_map = vp7045_rc_keys, + .rc_key_map_size = ARRAY_SIZE(vp7045_rc_keys), + .rc_query = vp7045_rc_query, + + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 2, + .devices = { + { .name = "Twinhan USB2.0 DVB-T receiver (TwinhanDTV Alpha/MagicBox II)", + .cold_ids = { &vp7045_usb_table[0], NULL }, + .warm_ids = { &vp7045_usb_table[1], NULL }, + }, + { .name = "DigitalNow TinyUSB 2 DVB-t Receiver", + .cold_ids = { &vp7045_usb_table[2], NULL }, + .warm_ids = { &vp7045_usb_table[3], NULL }, + }, + { 0 }, + } +}; + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver vp7045_usb_driver = { + .owner = THIS_MODULE, + .name = "dvb-usb-vp7045", + .probe = vp7045_usb_probe, + .disconnect = dvb_usb_device_exit, + .id_table = vp7045_usb_table, +}; + +/* module stuff */ +static int __init vp7045_usb_module_init(void) +{ + int result; + if ((result = usb_register(&vp7045_usb_driver))) { + err("usb_register failed. (%d)",result); + return result; + } + + return 0; +} + +static void __exit vp7045_usb_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&vp7045_usb_driver); +} + +module_init(vp7045_usb_module_init); +module_exit(vp7045_usb_module_exit); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Driver for Twinhan MagicBox/Alpha and DNTV tinyUSB2 DVB-T USB2.0"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/vp7045.h b/drivers/media/dvb/dvb-usb/vp7045.h new file mode 100644 index 000000000000..9ce21a20fa86 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/vp7045.h @@ -0,0 +1,78 @@ +/* Common header-file of the Linux driver for the TwinhanDTV Alpha/MagicBoxII + * USB2.0 DVB-T receiver. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * Thanks to Twinhan who kindly provided hardware and information. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#ifndef _DVB_USB_VP7045_H_ +#define _DVB_USB_VP7045_H_ + +#define DVB_USB_LOG_PREFIX "vp7045" +#include "dvb-usb.h" + +extern int dvb_usb_vp7045_debug; +#define deb_info(args...) dprintk(dvb_usb_vp7045_debug,0x01,args) +#define deb_xfer(args...) dprintk(dvb_usb_vp7045_debug,0x02,args) +#define deb_rc(args...) dprintk(dvb_usb_vp7045_debug,0x04,args) + +/* vp7045 commands */ + +/* Twinhan Vendor requests */ +#define TH_COMMAND_IN 0xC0 +#define TH_COMMAND_OUT 0xC1 + +/* command bytes */ +#define TUNER_REG_READ 0x03 +#define TUNER_REG_WRITE 0x04 + +#define RC_VAL_READ 0x05 + #define RC_NO_KEY 0x44 + +#define SET_TUNER_POWER 0x06 +#define CHECK_TUNER_POWER 0x12 + #define Tuner_Power_ON 1 + #define Tuner_Power_OFF 0 + +#define GET_USB_SPEED 0x07 + #define USB_SPEED_LOW 0 + #define USB_SPEED_FULL 1 + #define USB_SPEED_HIGH 2 + +#define LOCK_TUNER_COMMAND 0x09 + +#define TUNER_SIGNAL_READ 0x0A + +/* FX2 eeprom */ +#define SET_EE_VALUE 0x10 +#define GET_EE_VALUE 0x11 + #define FX2_ID_ADDR 0x00 + #define VID_MSB_ADDR 0x02 + #define VID_LSB_ADDR 0x01 + #define PID_MSB_ADDR 0x04 + #define PID_LSB_ADDR 0x03 + #define MAC_0_ADDR 0x07 + #define MAC_1_ADDR 0x08 + #define MAC_2_ADDR 0x09 + #define MAC_3_ADDR 0x0a + #define MAC_4_ADDR 0x0b + #define MAC_5_ADDR 0x0c + +#define RESET_FX2 0x13 + +#define FW_VERSION_READ 0x0B +#define VENDOR_STRING_READ 0x0C +#define PRODUCT_STRING_READ 0x0D +#define FW_BCD_VERSION_READ 0x14 + +extern struct dvb_frontend * vp7045_fe_attach(struct dvb_usb_device *d); +extern int vp7045_usb_op(struct dvb_usb_device *d, u8 cmd, u8 *out, int outlen, u8 *in, int inlen,int msec); +extern u8 vp7045_read_reg(struct dvb_usb_device *d, u8 reg); + +#endif diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 75fb556ec01f..b4fddf513ebe 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -173,4 +173,12 @@ config DVB_OR51132 An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want to support this frontend. +config DVB_BCM3510 + tristate "Broadcom BCM3510" + depends on DVB_CORE + select FW_LOADER + help + An ATSC 8VSB/16VSB and QAM64/256 tuner module. Say Y when you want to + support this frontend. + endmenu diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 7f8784870eab..91d6d3576d3d 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -28,3 +28,4 @@ obj-$(CONFIG_DVB_STV0297) += stv0297.o obj-$(CONFIG_DVB_NXT2002) += nxt2002.o obj-$(CONFIG_DVB_OR51211) += or51211.o obj-$(CONFIG_DVB_OR51132) += or51132.o +obj-$(CONFIG_DVB_BCM3510) += bcm3510.o diff --git a/drivers/media/dvb/frontends/bcm3510.c b/drivers/media/dvb/frontends/bcm3510.c new file mode 100644 index 000000000000..f5fdc5c3e605 --- /dev/null +++ b/drivers/media/dvb/frontends/bcm3510.c @@ -0,0 +1,853 @@ +/* + * Support for the Broadcom BCM3510 ATSC demodulator (1st generation Air2PC) + * + * Copyright (C) 2001-5, B2C2 inc. + * + * GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@desy.de> + * + * This driver is "hard-coded" to be used with the 1st generation of + * Technisat/B2C2's Air2PC ATSC PCI/USB cards/boxes. The pll-programming + * (Panasonic CT10S) is located here, which is actually wrong. Unless there is + * another device with a BCM3510, this is no problem. + * + * The driver works also with QAM64 DVB-C, but had an unreasonable high + * UNC. (Tested with the Air2PC ATSC 1st generation) + * + * You'll need a firmware for this driver in order to get it running. It is + * called "dvb-fe-bcm3510-01.fw". + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 675 Mass + * Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/firmware.h> + +#include "dvb_frontend.h" +#include "bcm3510.h" +#include "bcm3510_priv.h" + +struct bcm3510_state { + + struct i2c_adapter* i2c; + struct dvb_frontend_ops ops; + const struct bcm3510_config* config; + struct dvb_frontend frontend; + + /* demodulator private data */ + struct semaphore hab_sem; + u8 firmware_loaded:1; + + unsigned long next_status_check; + unsigned long status_check_interval; + struct bcm3510_hab_cmd_status1 status1; + struct bcm3510_hab_cmd_status2 status2; +}; + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,2=i2c (|-able))."); + +#define dprintk(level,x...) if (level & debug) printk(x) +#define dbufout(b,l,m) {\ + int i; \ + for (i = 0; i < l; i++) \ + m("%02x ",b[i]); \ +} +#define deb_info(args...) dprintk(0x01,args) +#define deb_i2c(args...) dprintk(0x02,args) +#define deb_hab(args...) dprintk(0x04,args) + +/* transfer functions */ +static int bcm3510_writebytes (struct bcm3510_state *state, u8 reg, u8 *buf, u8 len) +{ + u8 b[256]; + int err; + struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = b, .len = len + 1 }; + + b[0] = reg; + memcpy(&b[1],buf,len); + + deb_i2c("i2c wr %02x: ",reg); + dbufout(buf,len,deb_i2c); + deb_i2c("\n"); + + if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { + + deb_info("%s: i2c write error (addr %02x, reg %02x, err == %i)\n", + __FUNCTION__, state->config->demod_address, reg, err); + return -EREMOTEIO; + } + + return 0; +} + +static int bcm3510_readbytes (struct bcm3510_state *state, u8 reg, u8 *buf, u8 len) +{ + struct i2c_msg msg[] = { + { .addr = state->config->demod_address, .flags = 0, .buf = ®, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = len } + }; + int err; + + memset(buf,0,len); + + if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) { + deb_info("%s: i2c read error (addr %02x, reg %02x, err == %i)\n", + __FUNCTION__, state->config->demod_address, reg, err); + return -EREMOTEIO; + } + deb_i2c("i2c rd %02x: ",reg); + dbufout(buf,len,deb_i2c); + deb_i2c("\n"); + + return 0; +} + +static int bcm3510_writeB(struct bcm3510_state *state, u8 reg, bcm3510_register_value v) +{ + return bcm3510_writebytes(state,reg,&v.raw,1); +} + +static int bcm3510_readB(struct bcm3510_state *state, u8 reg, bcm3510_register_value *v) +{ + return bcm3510_readbytes(state,reg,&v->raw,1); +} + +/* Host Access Buffer transfers */ +static int bcm3510_hab_get_response(struct bcm3510_state *st, u8 *buf, int len) +{ + bcm3510_register_value v; + int ret,i; + + v.HABADR_a6.HABADR = 0; + if ((ret = bcm3510_writeB(st,0xa6,v)) < 0) + return ret; + + for (i = 0; i < len; i++) { + if ((ret = bcm3510_readB(st,0xa7,&v)) < 0) + return ret; + buf[i] = v.HABDATA_a7; + } + return 0; +} + +static int bcm3510_hab_send_request(struct bcm3510_state *st, u8 *buf, int len) +{ + bcm3510_register_value v,hab; + int ret,i; + unsigned long t; + +/* Check if any previous HAB request still needs to be serviced by the + * Aquisition Processor before sending new request */ + if ((ret = bcm3510_readB(st,0xa8,&v)) < 0) + return ret; + if (v.HABSTAT_a8.HABR) { + deb_info("HAB is running already - clearing it.\n"); + v.HABSTAT_a8.HABR = 0; + bcm3510_writeB(st,0xa8,v); +// return -EBUSY; + } + +/* Send the start HAB Address (automatically incremented after write of + * HABDATA) and write the HAB Data */ + hab.HABADR_a6.HABADR = 0; + if ((ret = bcm3510_writeB(st,0xa6,hab)) < 0) + return ret; + + for (i = 0; i < len; i++) { + hab.HABDATA_a7 = buf[i]; + if ((ret = bcm3510_writeB(st,0xa7,hab)) < 0) + return ret; + } + +/* Set the HABR bit to indicate AP request in progress (LBHABR allows HABR to + * be written) */ + v.raw = 0; v.HABSTAT_a8.HABR = 1; v.HABSTAT_a8.LDHABR = 1; + if ((ret = bcm3510_writeB(st,0xa8,v)) < 0) + return ret; + +/* Polling method: Wait until the AP finishes processing the HAB request */ + t = jiffies + 1*HZ; + while (time_before(jiffies, t)) { + deb_info("waiting for HAB to complete\n"); + msleep(10); + if ((ret = bcm3510_readB(st,0xa8,&v)) < 0) + return ret; + + if (!v.HABSTAT_a8.HABR) + return 0; + } + + deb_info("send_request execution timed out.\n"); + return -ETIMEDOUT; +} + +static int bcm3510_do_hab_cmd(struct bcm3510_state *st, u8 cmd, u8 msgid, u8 *obuf, u8 olen, u8 *ibuf, u8 ilen) +{ + u8 ob[olen+2],ib[ilen+2]; + int ret = 0; + + ob[0] = cmd; + ob[1] = msgid; + memcpy(&ob[2],obuf,olen); + + deb_hab("hab snd: "); + dbufout(ob,olen+2,deb_hab); + deb_hab("\n"); + + if (down_interruptible(&st->hab_sem) < 0) + return -EAGAIN; + + if ((ret = bcm3510_hab_send_request(st, ob, olen+2)) < 0 || + (ret = bcm3510_hab_get_response(st, ib, ilen+2)) < 0) + goto error; + + deb_hab("hab get: "); + dbufout(ib,ilen+2,deb_hab); + deb_hab("\n"); + + memcpy(ibuf,&ib[2],ilen); +error: + up(&st->hab_sem); + return ret; +} + +#if 0 +/* not needed, we use a semaphore to prevent HAB races */ +static int bcm3510_is_ap_ready(struct bcm3510_state *st) +{ + bcm3510_register_value ap,hab; + int ret; + + if ((ret = bcm3510_readB(st,0xa8,&hab)) < 0 || + (ret = bcm3510_readB(st,0xa2,&ap) < 0)) + return ret; + + if (ap.APSTAT1_a2.RESET || ap.APSTAT1_a2.IDLE || ap.APSTAT1_a2.STOP || hab.HABSTAT_a8.HABR) { + deb_info("AP is busy\n"); + return -EBUSY; + } + + return 0; +} +#endif + +static int bcm3510_bert_reset(struct bcm3510_state *st) +{ + bcm3510_register_value b; + int ret; + + if ((ret < bcm3510_readB(st,0xfa,&b)) < 0) + return ret; + + b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b); + b.BERCTL_fa.RESYNC = 1; bcm3510_writeB(st,0xfa,b); + b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b); + b.BERCTL_fa.CNTCTL = 1; b.BERCTL_fa.BITCNT = 1; bcm3510_writeB(st,0xfa,b); + + /* clear residual bit counter TODO */ + return 0; +} + +static int bcm3510_refresh_state(struct bcm3510_state *st) +{ + if (time_after(jiffies,st->next_status_check)) { + bcm3510_do_hab_cmd(st, CMD_STATUS, MSGID_STATUS1, NULL,0, (u8 *)&st->status1, sizeof(st->status1)); + bcm3510_do_hab_cmd(st, CMD_STATUS, MSGID_STATUS2, NULL,0, (u8 *)&st->status2, sizeof(st->status2)); + st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000; + } + return 0; +} + +static int bcm3510_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct bcm3510_state* st = fe->demodulator_priv; + bcm3510_refresh_state(st); + + *status = 0; + if (st->status1.STATUS1.RECEIVER_LOCK) + *status |= FE_HAS_LOCK | FE_HAS_SYNC; + + if (st->status1.STATUS1.FEC_LOCK) + *status |= FE_HAS_VITERBI; + + if (st->status1.STATUS1.OUT_PLL_LOCK) + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER; + + if (*status & FE_HAS_LOCK) + st->status_check_interval = 1500; + else /* more frequently checks if no lock has been achieved yet */ + st->status_check_interval = 500; + + deb_info("real_status: %02x\n",*status); + return 0; +} + +static int bcm3510_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct bcm3510_state* st = fe->demodulator_priv; + bcm3510_refresh_state(st); + + *ber = (st->status2.LDBER0 << 16) | (st->status2.LDBER1 << 8) | st->status2.LDBER2; + return 0; +} + +static int bcm3510_read_unc(struct dvb_frontend* fe, u32* unc) +{ + struct bcm3510_state* st = fe->demodulator_priv; + bcm3510_refresh_state(st); + *unc = (st->status2.LDUERC0 << 8) | st->status2.LDUERC1; + return 0; +} + +static int bcm3510_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + struct bcm3510_state* st = fe->demodulator_priv; + s32 t; + + bcm3510_refresh_state(st); + t = st->status2.SIGNAL; + + if (t > 190) + t = 190; + if (t < 90) + t = 90; + + t -= 90; + t = t * 0xff / 100; + /* normalize if necessary */ + *strength = (t << 8) | t; + return 0; +} + +static int bcm3510_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct bcm3510_state* st = fe->demodulator_priv; + bcm3510_refresh_state(st); + + *snr = st->status1.SNR_EST0*1000 + ((st->status1.SNR_EST1*1000) >> 8); + return 0; +} + +/* tuner frontend programming */ +static int bcm3510_tuner_cmd(struct bcm3510_state* st,u8 bc, u16 n, u8 a) +{ + struct bcm3510_hab_cmd_tune c; + memset(&c,0,sizeof(struct bcm3510_hab_cmd_tune)); + +/* I2C Mode disabled, set 16 control / Data pairs */ + c.length = 0x10; + c.clock_width = 0; +/* CS1, CS0, DATA, CLK bits control the tuner RF_AGC_SEL pin is set to + * logic high (as Configuration) */ + c.misc = 0x10; +/* Set duration of the initial state of TUNCTL = 3.34 micro Sec */ + c.TUNCTL_state = 0x40; + +/* PRESCALER DEVIDE RATIO | BC1_2_3_4; (band switch), 1stosc REFERENCE COUNTER REF_S12 and REF_S11 */ + c.ctl_dat[0].ctrl.size = BITS_8; + c.ctl_dat[0].data = 0x80 | bc; + +/* Control DATA pin, 1stosc REFERENCE COUNTER REF_S10 to REF_S3 */ + c.ctl_dat[1].ctrl.size = BITS_8; + c.ctl_dat[1].data = 4; + +/* set CONTROL BIT 1 to 1, 1stosc REFERENCE COUNTER REF_S2 to REF_S1 */ + c.ctl_dat[2].ctrl.size = BITS_3; + c.ctl_dat[2].data = 0x20; + +/* control CS0 pin, pulse byte ? */ + c.ctl_dat[3].ctrl.size = BITS_3; + c.ctl_dat[3].ctrl.clk_off = 1; + c.ctl_dat[3].ctrl.cs0 = 1; + c.ctl_dat[3].data = 0x40; + +/* PGM_S18 to PGM_S11 */ + c.ctl_dat[4].ctrl.size = BITS_8; + c.ctl_dat[4].data = n >> 3; + +/* PGM_S10 to PGM_S8, SWL_S7 to SWL_S3 */ + c.ctl_dat[5].ctrl.size = BITS_8; + c.ctl_dat[5].data = ((n & 0x7) << 5) | (a >> 2); + +/* SWL_S2 and SWL_S1, set CONTROL BIT 2 to 0 */ + c.ctl_dat[6].ctrl.size = BITS_3; + c.ctl_dat[6].data = (a << 6) & 0xdf; + +/* control CS0 pin, pulse byte ? */ + c.ctl_dat[7].ctrl.size = BITS_3; + c.ctl_dat[7].ctrl.clk_off = 1; + c.ctl_dat[7].ctrl.cs0 = 1; + c.ctl_dat[7].data = 0x40; + +/* PRESCALER DEVIDE RATIO, 2ndosc REFERENCE COUNTER REF_S12 and REF_S11 */ + c.ctl_dat[8].ctrl.size = BITS_8; + c.ctl_dat[8].data = 0x80; + +/* 2ndosc REFERENCE COUNTER REF_S10 to REF_S3 */ + c.ctl_dat[9].ctrl.size = BITS_8; + c.ctl_dat[9].data = 0x10; + +/* set CONTROL BIT 1 to 1, 2ndosc REFERENCE COUNTER REF_S2 to REF_S1 */ + c.ctl_dat[10].ctrl.size = BITS_3; + c.ctl_dat[10].data = 0x20; + +/* pulse byte */ + c.ctl_dat[11].ctrl.size = BITS_3; + c.ctl_dat[11].ctrl.clk_off = 1; + c.ctl_dat[11].ctrl.cs1 = 1; + c.ctl_dat[11].data = 0x40; + +/* PGM_S18 to PGM_S11 */ + c.ctl_dat[12].ctrl.size = BITS_8; + c.ctl_dat[12].data = 0x2a; + +/* PGM_S10 to PGM_S8 and SWL_S7 to SWL_S3 */ + c.ctl_dat[13].ctrl.size = BITS_8; + c.ctl_dat[13].data = 0x8e; + +/* SWL_S2 and SWL_S1 and set CONTROL BIT 2 to 0 */ + c.ctl_dat[14].ctrl.size = BITS_3; + c.ctl_dat[14].data = 0; + +/* Pulse Byte */ + c.ctl_dat[15].ctrl.size = BITS_3; + c.ctl_dat[15].ctrl.clk_off = 1; + c.ctl_dat[15].ctrl.cs1 = 1; + c.ctl_dat[15].data = 0x40; + + return bcm3510_do_hab_cmd(st,CMD_TUNE, MSGID_TUNE,(u8 *) &c,sizeof(c), NULL, 0); +} + +static int bcm3510_set_freq(struct bcm3510_state* st,u32 freq) +{ + u8 bc,a; + u16 n; + s32 YIntercept,Tfvco1; + + freq /= 1000; + + deb_info("%dkHz:",freq); + /* set Band Switch */ + if (freq <= 168000) + bc = 0x1c; + else if (freq <= 378000) + bc = 0x2c; + else + bc = 0x30; + + if (freq >= 470000) { + freq -= 470001; + YIntercept = 18805; + } else if (freq >= 90000) { + freq -= 90001; + YIntercept = 15005; + } else if (freq >= 76000){ + freq -= 76001; + YIntercept = 14865; + } else { + freq -= 54001; + YIntercept = 14645; + } + + Tfvco1 = (((freq/6000)*60 + YIntercept)*4)/10; + + n = Tfvco1 >> 6; + a = Tfvco1 & 0x3f; + + deb_info(" BC1_2_3_4: %x, N: %x A: %x\n", bc, n, a); + if (n >= 16 && n <= 2047) + return bcm3510_tuner_cmd(st,bc,n,a); + + return -EINVAL; +} + +static int bcm3510_set_frontend(struct dvb_frontend* fe, + struct dvb_frontend_parameters *p) +{ + struct bcm3510_state* st = fe->demodulator_priv; + struct bcm3510_hab_cmd_ext_acquire cmd; + struct bcm3510_hab_cmd_bert_control bert; + int ret; + + memset(&cmd,0,sizeof(cmd)); + switch (p->u.vsb.modulation) { + case QAM_256: + cmd.ACQUIRE0.MODE = 0x1; + cmd.ACQUIRE1.SYM_RATE = 0x1; + cmd.ACQUIRE1.IF_FREQ = 0x1; + break; + case QAM_64: + cmd.ACQUIRE0.MODE = 0x2; + cmd.ACQUIRE1.SYM_RATE = 0x2; + cmd.ACQUIRE1.IF_FREQ = 0x1; + break; +/* case QAM_256: + cmd.ACQUIRE0.MODE = 0x3; + break; + case QAM_128: + cmd.ACQUIRE0.MODE = 0x4; + break; + case QAM_64: + cmd.ACQUIRE0.MODE = 0x5; + break; + case QAM_32: + cmd.ACQUIRE0.MODE = 0x6; + break; + case QAM_16: + cmd.ACQUIRE0.MODE = 0x7; + break;*/ + case VSB_8: + cmd.ACQUIRE0.MODE = 0x8; + cmd.ACQUIRE1.SYM_RATE = 0x0; + cmd.ACQUIRE1.IF_FREQ = 0x0; + break; + case VSB_16: + cmd.ACQUIRE0.MODE = 0x9; + cmd.ACQUIRE1.SYM_RATE = 0x0; + cmd.ACQUIRE1.IF_FREQ = 0x0; + default: + return -EINVAL; + }; + cmd.ACQUIRE0.OFFSET = 0; + cmd.ACQUIRE0.NTSCSWEEP = 1; + cmd.ACQUIRE0.FA = 1; + cmd.ACQUIRE0.BW = 0; + +/* if (enableOffset) { + cmd.IF_OFFSET0 = xx; + cmd.IF_OFFSET1 = xx; + + cmd.SYM_OFFSET0 = xx; + cmd.SYM_OFFSET1 = xx; + if (enableNtscSweep) { + cmd.NTSC_OFFSET0; + cmd.NTSC_OFFSET1; + } + } */ + bcm3510_do_hab_cmd(st, CMD_ACQUIRE, MSGID_EXT_TUNER_ACQUIRE, (u8 *) &cmd, sizeof(cmd), NULL, 0); + +/* doing it with different MSGIDs, data book and source differs */ + bert.BE = 0; + bert.unused = 0; + bcm3510_do_hab_cmd(st, CMD_STATE_CONTROL, MSGID_BERT_CONTROL, (u8 *) &bert, sizeof(bert), NULL, 0); + bcm3510_do_hab_cmd(st, CMD_STATE_CONTROL, MSGID_BERT_SET, (u8 *) &bert, sizeof(bert), NULL, 0); + + bcm3510_bert_reset(st); + + if ((ret = bcm3510_set_freq(st,p->frequency)) < 0) + return ret; + + memset(&st->status1,0,sizeof(st->status1)); + memset(&st->status2,0,sizeof(st->status2)); + st->status_check_interval = 500; + +/* Give the AP some time */ + msleep(200); + + return 0; +} + +static int bcm3510_sleep(struct dvb_frontend* fe) +{ + return 0; +} + +static int bcm3510_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *s) +{ + s->min_delay_ms = 1000; + s->step_size = 0; + s->max_drift = 0; + return 0; +} + +static void bcm3510_release(struct dvb_frontend* fe) +{ + struct bcm3510_state* state = fe->demodulator_priv; + kfree(state); +} + +/* firmware download: + * firmware file is build up like this: + * 16bit addr, 16bit length, 8byte of length + */ +#define BCM3510_DEFAULT_FIRMWARE "dvb-fe-bcm3510-01.fw" + +static int bcm3510_write_ram(struct bcm3510_state *st, u16 addr, u8 *b, u16 len) +{ + int ret = 0,i; + bcm3510_register_value vH, vL,vD; + + vH.MADRH_a9 = addr >> 8; + vL.MADRL_aa = addr; + if ((ret = bcm3510_writeB(st,0xa9,vH)) < 0) return ret; + if ((ret = bcm3510_writeB(st,0xaa,vL)) < 0) return ret; + + for (i = 0; i < len; i++) { + vD.MDATA_ab = b[i]; + if ((ret = bcm3510_writeB(st,0xab,vD)) < 0) + return ret; + } + + return 0; +} + +static int bcm3510_download_firmware(struct dvb_frontend* fe) +{ + struct bcm3510_state* st = fe->demodulator_priv; + const struct firmware *fw; + u16 addr,len; + u8 *b; + int ret,i; + + deb_info("requesting firmware\n"); + if ((ret = st->config->request_firmware(fe, &fw, BCM3510_DEFAULT_FIRMWARE)) < 0) { + err("could not load firmware (%s): %d",BCM3510_DEFAULT_FIRMWARE,ret); + return ret; + } + deb_info("got firmware: %d\n",fw->size); + + b = fw->data; + for (i = 0; i < fw->size;) { + addr = le16_to_cpu( *( (u16 *)&b[i] ) ); + len = le16_to_cpu( *( (u16 *)&b[i+2] ) ); + deb_info("firmware chunk, addr: 0x%04x, len: 0x%04x, total length: 0x%04x\n",addr,len,fw->size); + if ((ret = bcm3510_write_ram(st,addr,&b[i+4],len)) < 0) { + err("firmware download failed: %d\n",ret); + return ret; + } + i += 4 + len; + } + release_firmware(fw); + deb_info("firmware download successfully completed\n"); + return 0; +} + +static int bcm3510_check_firmware_version(struct bcm3510_state *st) +{ + struct bcm3510_hab_cmd_get_version_info ver; + bcm3510_do_hab_cmd(st,CMD_GET_VERSION_INFO,MSGID_GET_VERSION_INFO,NULL,0,(u8*)&ver,sizeof(ver)); + + deb_info("Version information: 0x%02x 0x%02x 0x%02x 0x%02x\n", + ver.microcode_version, ver.script_version, ver.config_version, ver.demod_version); + + if (ver.script_version == BCM3510_DEF_SCRIPT_VERSION && + ver.config_version == BCM3510_DEF_CONFIG_VERSION && + ver.demod_version == BCM3510_DEF_DEMOD_VERSION) + return 0; + + deb_info("version check failed\n"); + return -ENODEV; +} + +/* (un)resetting the AP */ +static int bcm3510_reset(struct bcm3510_state *st) +{ + int ret; + unsigned long t; + bcm3510_register_value v; + + bcm3510_readB(st,0xa0,&v); v.HCTL1_a0.RESET = 1; + if ((ret = bcm3510_writeB(st,0xa0,v)) < 0) + return ret; + + t = jiffies + 3*HZ; + while (time_before(jiffies, t)) { + msleep(10); + if ((ret = bcm3510_readB(st,0xa2,&v)) < 0) + return ret; + + if (v.APSTAT1_a2.RESET) + return 0; + } + deb_info("reset timed out\n"); + return -ETIMEDOUT; +} + +static int bcm3510_clear_reset(struct bcm3510_state *st) +{ + bcm3510_register_value v; + int ret; + unsigned long t; + + v.raw = 0; + if ((ret = bcm3510_writeB(st,0xa0,v)) < 0) + return ret; + + t = jiffies + 3*HZ; + while (time_before(jiffies, t)) { + msleep(10); + if ((ret = bcm3510_readB(st,0xa2,&v)) < 0) + return ret; + + /* verify that reset is cleared */ + if (!v.APSTAT1_a2.RESET) + return 0; + } + deb_info("reset clear timed out\n"); + return -ETIMEDOUT; +} + +static int bcm3510_init_cold(struct bcm3510_state *st) +{ + int ret; + bcm3510_register_value v; + + /* read Acquisation Processor status register and check it is not in RUN mode */ + if ((ret = bcm3510_readB(st,0xa2,&v)) < 0) + return ret; + if (v.APSTAT1_a2.RUN) { + deb_info("AP is already running - firmware already loaded.\n"); + return 0; + } + + deb_info("reset?\n"); + if ((ret = bcm3510_reset(st)) < 0) + return ret; + + deb_info("tristate?\n"); + /* tri-state */ + v.TSTCTL_2e.CTL = 0; + if ((ret = bcm3510_writeB(st,0x2e,v)) < 0) + return ret; + + deb_info("firmware?\n"); + if ((ret = bcm3510_download_firmware(&st->frontend)) < 0 || + (ret = bcm3510_clear_reset(st)) < 0) + return ret; + + /* anything left here to Let the acquisition processor begin execution at program counter 0000 ??? */ + + return 0; +} + +static int bcm3510_init(struct dvb_frontend* fe) +{ + struct bcm3510_state* st = fe->demodulator_priv; + bcm3510_register_value j; + struct bcm3510_hab_cmd_set_agc c; + int ret; + + if ((ret = bcm3510_readB(st,0xca,&j)) < 0) + return ret; + + deb_info("JDEC: %02x\n",j.raw); + + switch (j.JDEC_ca.JDEC) { + case JDEC_WAIT_AT_RAM: + deb_info("attempting to download firmware\n"); + if ((ret = bcm3510_init_cold(st)) < 0) + return ret; + case JDEC_EEPROM_LOAD_WAIT: /* fall-through is wanted */ + deb_info("firmware is loaded\n"); + bcm3510_check_firmware_version(st); + break; + default: + return -ENODEV; + } + + memset(&c,0,1); + c.SEL = 1; + bcm3510_do_hab_cmd(st,CMD_AUTO_PARAM,MSGID_SET_RF_AGC_SEL,(u8 *)&c,sizeof(c),NULL,0); + + return 0; +} + + +static struct dvb_frontend_ops bcm3510_ops; + +struct dvb_frontend* bcm3510_attach(const struct bcm3510_config *config, + struct i2c_adapter *i2c) +{ + struct bcm3510_state* state = NULL; + int ret; + bcm3510_register_value v; + + /* allocate memory for the internal state */ + state = kmalloc(sizeof(struct bcm3510_state), GFP_KERNEL); + if (state == NULL) + goto error; + memset(state,0,sizeof(struct bcm3510_state)); + + /* setup the state */ + + state->config = config; + state->i2c = i2c; + memcpy(&state->ops, &bcm3510_ops, sizeof(struct dvb_frontend_ops)); + + /* create dvb_frontend */ + state->frontend.ops = &state->ops; + state->frontend.demodulator_priv = state; + + sema_init(&state->hab_sem, 1); + + if ((ret = bcm3510_readB(state,0xe0,&v)) < 0) + goto error; + + deb_info("Revision: 0x%1x, Layer: 0x%1x.\n",v.REVID_e0.REV,v.REVID_e0.LAYER); + + if ((v.REVID_e0.REV != 0x1 && v.REVID_e0.LAYER != 0xb) && /* cold */ + (v.REVID_e0.REV != 0x8 && v.REVID_e0.LAYER != 0x0)) /* warm */ + goto error; + + info("Revision: 0x%1x, Layer: 0x%1x.",v.REVID_e0.REV,v.REVID_e0.LAYER); + + bcm3510_reset(state); + + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(bcm3510_attach); + +static struct dvb_frontend_ops bcm3510_ops = { + + .info = { + .name = "Broadcom BCM3510 VSB/QAM frontend", + .type = FE_ATSC, + .frequency_min = 54000000, + .frequency_max = 803000000, + /* stepsize is just a guess */ + .frequency_stepsize = 0, + .caps = + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_8VSB | FE_CAN_16VSB | + FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_128 | FE_CAN_QAM_256 + }, + + .release = bcm3510_release, + + .init = bcm3510_init, + .sleep = bcm3510_sleep, + + .set_frontend = bcm3510_set_frontend, + .get_tune_settings = bcm3510_get_tune_settings, + + .read_status = bcm3510_read_status, + .read_ber = bcm3510_read_ber, + .read_signal_strength = bcm3510_read_signal_strength, + .read_snr = bcm3510_read_snr, + .read_ucblocks = bcm3510_read_unc, +}; + +MODULE_DESCRIPTION("Broadcom BCM3510 ATSC (8VSB/16VSB & ITU J83 AnnexB FEC QAM64/256) demodulator driver"); +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/bcm3510.h b/drivers/media/dvb/frontends/bcm3510.h new file mode 100644 index 000000000000..80f5d0953d02 --- /dev/null +++ b/drivers/media/dvb/frontends/bcm3510.h @@ -0,0 +1,40 @@ +/* + * Support for the Broadcom BCM3510 ATSC demodulator (1st generation Air2PC) + * + * Copyright (C) 2001-5, B2C2 inc. + * + * GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@desy.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef BCM3510_H +#define BCM3510_H + +#include <linux/dvb/frontend.h> +#include <linux/firmware.h> + +struct bcm3510_config +{ + /* the demodulator's i2c address */ + u8 demod_address; + + /* request firmware for device */ + int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name); +}; + +extern struct dvb_frontend* bcm3510_attach(const struct bcm3510_config* config, + struct i2c_adapter* i2c); + +#endif diff --git a/drivers/media/dvb/frontends/bcm3510_priv.h b/drivers/media/dvb/frontends/bcm3510_priv.h new file mode 100644 index 000000000000..3bb1bc2a04f0 --- /dev/null +++ b/drivers/media/dvb/frontends/bcm3510_priv.h @@ -0,0 +1,460 @@ +/* + * Support for the Broadcom BCM3510 ATSC demodulator (1st generation Air2PC) + * + * Copyright (C) 2001-5, B2C2 inc. + * + * GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@desy.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __BCM3510_PRIV_H__ +#define __BCM3510_PRIV_H__ + +#define PACKED __attribute__((packed)) + +#undef err +#define err(format, arg...) printk(KERN_ERR "bcm3510: " format "\n" , ## arg) +#undef info +#define info(format, arg...) printk(KERN_INFO "bcm3510: " format "\n" , ## arg) +#undef warn +#define warn(format, arg...) printk(KERN_WARNING "bcm3510: " format "\n" , ## arg) + + +#define PANASONIC_FIRST_IF_BASE_IN_KHz 1407500 +#define BCM3510_SYMBOL_RATE 5381000 + +typedef union { + u8 raw; + + struct { + u8 CTL :8; + } TSTCTL_2e; + + u8 LDCERC_4e; + u8 LDUERC_4f; + u8 LD_BER0_65; + u8 LD_BER1_66; + u8 LD_BER2_67; + u8 LD_BER3_68; + + struct { + u8 RESET :1; + u8 IDLE :1; + u8 STOP :1; + u8 HIRQ0 :1; + u8 HIRQ1 :1; + u8 na0 :1; + u8 HABAV :1; + u8 na1 :1; + } HCTL1_a0; + + struct { + u8 na0 :1; + u8 IDLMSK :1; + u8 STMSK :1; + u8 I0MSK :1; + u8 I1MSK :1; + u8 na1 :1; + u8 HABMSK :1; + u8 na2 :1; + } HCTLMSK_a1; + + struct { + u8 RESET :1; + u8 IDLE :1; + u8 STOP :1; + u8 RUN :1; + u8 HABAV :1; + u8 MEMAV :1; + u8 ALDONE :1; + u8 REIRQ :1; + } APSTAT1_a2; + + struct { + u8 RSTMSK :1; + u8 IMSK :1; + u8 SMSK :1; + u8 RMSK :1; + u8 HABMSK :1; + u8 MAVMSK :1; + u8 ALDMSK :1; + u8 REMSK :1; + } APMSK1_a3; + + u8 APSTAT2_a4; + u8 APMSK2_a5; + + struct { + u8 HABADR :7; + u8 na :1; + } HABADR_a6; + + u8 HABDATA_a7; + + struct { + u8 HABR :1; + u8 LDHABR :1; + u8 APMSK :1; + u8 HMSK :1; + u8 LDMSK :1; + u8 na :3; + } HABSTAT_a8; + + u8 MADRH_a9; + u8 MADRL_aa; + u8 MDATA_ab; + + struct { +#define JDEC_WAIT_AT_RAM 0x7 +#define JDEC_EEPROM_LOAD_WAIT 0x4 + u8 JDEC :3; + u8 na :5; + } JDEC_ca; + + struct { + u8 REV :4; + u8 LAYER :4; + } REVID_e0; + + struct { + u8 unk0 :1; + u8 CNTCTL :1; + u8 BITCNT :1; + u8 unk1 :1; + u8 RESYNC :1; + u8 unk2 :3; + } BERCTL_fa; + + struct { + u8 CSEL0 :1; + u8 CLKED0 :1; + u8 CSEL1 :1; + u8 CLKED1 :1; + u8 CLKLEV :1; + u8 SPIVAR :1; + u8 na :2; + } TUNSET_fc; + + struct { + u8 CLK :1; + u8 DATA :1; + u8 CS0 :1; + u8 CS1 :1; + u8 AGCSEL :1; + u8 na0 :1; + u8 TUNSEL :1; + u8 na1 :1; + } TUNCTL_fd; + + u8 TUNSEL0_fe; + u8 TUNSEL1_ff; + +} bcm3510_register_value; + +/* HAB commands */ + +/* version */ +#define CMD_GET_VERSION_INFO 0x3D +#define MSGID_GET_VERSION_INFO 0x15 +struct bcm3510_hab_cmd_get_version_info { + u8 microcode_version; + u8 script_version; + u8 config_version; + u8 demod_version; +} PACKED; + +#define BCM3510_DEF_MICROCODE_VERSION 0x0E +#define BCM3510_DEF_SCRIPT_VERSION 0x06 +#define BCM3510_DEF_CONFIG_VERSION 0x01 +#define BCM3510_DEF_DEMOD_VERSION 0xB1 + +/* acquire */ +#define CMD_ACQUIRE 0x38 + +#define MSGID_EXT_TUNER_ACQUIRE 0x0A +struct bcm3510_hab_cmd_ext_acquire { + struct { + u8 MODE :4; + u8 BW :1; + u8 FA :1; + u8 NTSCSWEEP :1; + u8 OFFSET :1; + } PACKED ACQUIRE0; /* control_byte */ + + struct { + u8 IF_FREQ :3; + u8 zero0 :1; + u8 SYM_RATE :3; + u8 zero1 :1; + } PACKED ACQUIRE1; /* sym_if */ + + u8 IF_OFFSET0; /* IF_Offset_10hz */ + u8 IF_OFFSET1; + u8 SYM_OFFSET0; /* SymbolRateOffset */ + u8 SYM_OFFSET1; + u8 NTSC_OFFSET0; /* NTSC_Offset_10hz */ + u8 NTSC_OFFSET1; +} PACKED; + +#define MSGID_INT_TUNER_ACQUIRE 0x0B +struct bcm3510_hab_cmd_int_acquire { + struct { + u8 MODE :4; + u8 BW :1; + u8 FA :1; + u8 NTSCSWEEP :1; + u8 OFFSET :1; + } PACKED ACQUIRE0; /* control_byte */ + + struct { + u8 IF_FREQ :3; + u8 zero0 :1; + u8 SYM_RATE :3; + u8 zero1 :1; + } PACKED ACQUIRE1; /* sym_if */ + + u8 TUNER_FREQ0; + u8 TUNER_FREQ1; + u8 TUNER_FREQ2; + u8 TUNER_FREQ3; + u8 IF_OFFSET0; /* IF_Offset_10hz */ + u8 IF_OFFSET1; + u8 SYM_OFFSET0; /* SymbolRateOffset */ + u8 SYM_OFFSET1; + u8 NTSC_OFFSET0; /* NTSC_Offset_10hz */ + u8 NTSC_OFFSET1; +} PACKED; + +/* modes */ +#define BCM3510_QAM16 = 0x01 +#define BCM3510_QAM32 = 0x02 +#define BCM3510_QAM64 = 0x03 +#define BCM3510_QAM128 = 0x04 +#define BCM3510_QAM256 = 0x05 +#define BCM3510_8VSB = 0x0B +#define BCM3510_16VSB = 0x0D + +/* IF_FREQS */ +#define BCM3510_IF_TERRESTRIAL 0x0 +#define BCM3510_IF_CABLE 0x1 +#define BCM3510_IF_USE_CMD 0x7 + +/* SYM_RATE */ +#define BCM3510_SR_8VSB 0x0 /* 5381119 s/sec */ +#define BCM3510_SR_256QAM 0x1 /* 5360537 s/sec */ +#define BCM3510_SR_16QAM 0x2 /* 5056971 s/sec */ +#define BCM3510_SR_MISC 0x3 /* 5000000 s/sec */ +#define BCM3510_SR_USE_CMD 0x7 + +/* special symbol rate */ +#define CMD_SET_VALUE_NOT_LISTED 0x2d +#define MSGID_SET_SYMBOL_RATE_NOT_LISTED 0x0c +struct bcm3510_hab_cmd_set_sr_not_listed { + u8 HOST_SYM_RATE0; + u8 HOST_SYM_RATE1; + u8 HOST_SYM_RATE2; + u8 HOST_SYM_RATE3; +} PACKED; + +/* special IF */ +#define MSGID_SET_IF_FREQ_NOT_LISTED 0x0d +struct bcm3510_hab_cmd_set_if_freq_not_listed { + u8 HOST_IF_FREQ0; + u8 HOST_IF_FREQ1; + u8 HOST_IF_FREQ2; + u8 HOST_IF_FREQ3; +} PACKED; + +/* auto reacquire */ +#define CMD_AUTO_PARAM 0x2a +#define MSGID_AUTO_REACQUIRE 0x0e +struct bcm3510_hab_cmd_auto_reacquire { + u8 ACQ :1; /* on/off*/ + u8 unused :7; +} PACKED; + +#define MSGID_SET_RF_AGC_SEL 0x12 +struct bcm3510_hab_cmd_set_agc { + u8 LVL :1; + u8 unused :6; + u8 SEL :1; +} PACKED; + +#define MSGID_SET_AUTO_INVERSION 0x14 +struct bcm3510_hab_cmd_auto_inversion { + u8 AI :1; + u8 unused :7; +} PACKED; + + +/* bert control */ +#define CMD_STATE_CONTROL 0x12 +#define MSGID_BERT_CONTROL 0x0e +#define MSGID_BERT_SET 0xfa +struct bcm3510_hab_cmd_bert_control { + u8 BE :1; + u8 unused :7; +} PACKED; + +#define MSGID_TRI_STATE 0x2e +struct bcm3510_hab_cmd_tri_state { + u8 RE :1; /* a/d ram port pins */ + u8 PE :1; /* baud clock pin */ + u8 AC :1; /* a/d clock pin */ + u8 BE :1; /* baud clock pin */ + u8 unused :4; +} PACKED; + + +/* tune */ +#define CMD_TUNE 0x38 +#define MSGID_TUNE 0x16 +struct bcm3510_hab_cmd_tune_ctrl_data_pair { + struct { +#define BITS_8 0x07 +#define BITS_7 0x06 +#define BITS_6 0x05 +#define BITS_5 0x04 +#define BITS_4 0x03 +#define BITS_3 0x02 +#define BITS_2 0x01 +#define BITS_1 0x00 + u8 size :3; + u8 unk :2; + u8 clk_off :1; + u8 cs0 :1; + u8 cs1 :1; + + } PACKED ctrl; + + u8 data; +} PACKED; + +struct bcm3510_hab_cmd_tune { + u8 length; + u8 clock_width; + u8 misc; + u8 TUNCTL_state; + + struct bcm3510_hab_cmd_tune_ctrl_data_pair ctl_dat[16]; +} PACKED; + +#define CMD_STATUS 0x38 +#define MSGID_STATUS1 0x08 +struct bcm3510_hab_cmd_status1 { + struct { + u8 EQ_MODE :4; + u8 reserved :2; + u8 QRE :1; /* if QSE and the spectrum is inversed */ + u8 QSE :1; /* automatic spectral inversion */ + } PACKED STATUS0; + + struct { + u8 RECEIVER_LOCK :1; + u8 FEC_LOCK :1; + u8 OUT_PLL_LOCK :1; + u8 reserved :5; + } PACKED STATUS1; + + struct { + u8 reserved :2; + u8 BW :1; + u8 NTE :1; /* NTSC filter sweep enabled */ + u8 AQI :1; /* currently acquiring */ + u8 FA :1; /* fast acquisition */ + u8 ARI :1; /* auto reacquire */ + u8 TI :1; /* programming the tuner */ + } PACKED STATUS2; + u8 STATUS3; + u8 SNR_EST0; + u8 SNR_EST1; + u8 TUNER_FREQ0; + u8 TUNER_FREQ1; + u8 TUNER_FREQ2; + u8 TUNER_FREQ3; + u8 SYM_RATE0; + u8 SYM_RATE1; + u8 SYM_RATE2; + u8 SYM_RATE3; + u8 SYM_OFFSET0; + u8 SYM_OFFSET1; + u8 SYM_ERROR0; + u8 SYM_ERROR1; + u8 IF_FREQ0; + u8 IF_FREQ1; + u8 IF_FREQ2; + u8 IF_FREQ3; + u8 IF_OFFSET0; + u8 IF_OFFSET1; + u8 IF_ERROR0; + u8 IF_ERROR1; + u8 NTSC_FILTER0; + u8 NTSC_FILTER1; + u8 NTSC_FILTER2; + u8 NTSC_FILTER3; + u8 NTSC_OFFSET0; + u8 NTSC_OFFSET1; + u8 NTSC_ERROR0; + u8 NTSC_ERROR1; + u8 INT_AGC_LEVEL0; + u8 INT_AGC_LEVEL1; + u8 EXT_AGC_LEVEL0; + u8 EXT_AGC_LEVEL1; +} PACKED; + +#define MSGID_STATUS2 0x14 +struct bcm3510_hab_cmd_status2 { + struct { + u8 EQ_MODE :4; + u8 reserved :2; + u8 QRE :1; + u8 QSR :1; + } PACKED STATUS0; + struct { + u8 RL :1; + u8 FL :1; + u8 OL :1; + u8 reserved :5; + } PACKED STATUS1; + u8 SYMBOL_RATE0; + u8 SYMBOL_RATE1; + u8 SYMBOL_RATE2; + u8 SYMBOL_RATE3; + u8 LDCERC0; + u8 LDCERC1; + u8 LDCERC2; + u8 LDCERC3; + u8 LDUERC0; + u8 LDUERC1; + u8 LDUERC2; + u8 LDUERC3; + u8 LDBER0; + u8 LDBER1; + u8 LDBER2; + u8 LDBER3; + struct { + u8 MODE_TYPE :4; /* acquire mode 0 */ + u8 reservd :4; + } MODE_TYPE; + u8 SNR_EST0; + u8 SNR_EST1; + u8 SIGNAL; +} PACKED; + +#define CMD_SET_RF_BW_NOT_LISTED 0x3f +#define MSGID_SET_RF_BW_NOT_LISTED 0x11 +/* TODO */ + +#endif diff --git a/drivers/media/dvb/frontends/dib3000-common.c b/drivers/media/dvb/frontends/dib3000-common.c index 47ab02e133d1..1a4f1f7c228a 100644 --- a/drivers/media/dvb/frontends/dib3000-common.c +++ b/drivers/media/dvb/frontends/dib3000-common.c @@ -73,7 +73,7 @@ u16 dib3000_seq[2][2][2] = /* fft,gua, inv */ }; MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de"); -MODULE_DESCRIPTION("Common functions for the dib3000mb/dib3000mc dvb-frontend drivers"); +MODULE_DESCRIPTION("Common functions for the dib3000mb/dib3000mc dvb frontend drivers"); MODULE_LICENSE("GPL"); EXPORT_SYMBOL(dib3000_seq); diff --git a/drivers/media/dvb/frontends/dib3000.h b/drivers/media/dvb/frontends/dib3000.h index 80687c130836..2d5475b5c063 100644 --- a/drivers/media/dvb/frontends/dib3000.h +++ b/drivers/media/dvb/frontends/dib3000.h @@ -32,9 +32,8 @@ struct dib3000_config u8 demod_address; /* PLL maintenance and the i2c address of the PLL */ - u8 (*pll_addr)(struct dvb_frontend *fe); - int (*pll_init)(struct dvb_frontend *fe, u8 pll_buf[5]); - int (*pll_set)(struct dvb_frontend *fe, struct dvb_frontend_parameters* params, u8 pll_buf[5]); + int (*pll_init)(struct dvb_frontend *fe); + int (*pll_set)(struct dvb_frontend *fe, struct dvb_frontend_parameters* params); }; struct dib_fe_xfer_ops diff --git a/drivers/media/dvb/frontends/dib3000mb.c b/drivers/media/dvb/frontends/dib3000mb.c index 6f52d649e97e..cd434b7cf9db 100644 --- a/drivers/media/dvb/frontends/dib3000mb.c +++ b/drivers/media/dvb/frontends/dib3000mb.c @@ -48,8 +48,6 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,2=xfer,4=setfe,8=getfe (|-a #define deb_setf(args...) dprintk(0x04,args) #define deb_getf(args...) dprintk(0x08,args) -static int dib3000mb_tuner_pass_ctrl(struct dvb_frontend *fe, int onoff, u8 pll_addr); - static int dib3000mb_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *fep); @@ -61,10 +59,8 @@ static int dib3000mb_set_frontend(struct dvb_frontend* fe, fe_code_rate_t fe_cr = FEC_NONE; int search_state, seq; - if (tuner && state->config.pll_addr && state->config.pll_set) { - dib3000mb_tuner_pass_ctrl(fe,1,state->config.pll_addr(fe)); - state->config.pll_set(fe, fep, NULL); - dib3000mb_tuner_pass_ctrl(fe,0,state->config.pll_addr(fe)); + if (tuner && state->config.pll_set) { + state->config.pll_set(fe, fep); deb_setf("bandwidth: "); switch (ofdm->bandwidth) { @@ -389,11 +385,8 @@ static int dib3000mb_fe_init(struct dvb_frontend* fe, int mobile_mode) wr(DIB3000MB_REG_DATA_IN_DIVERSITY, DIB3000MB_DATA_DIVERSITY_IN_OFF); - if (state->config.pll_init) { - dib3000mb_tuner_pass_ctrl(fe,1,state->config.pll_addr(fe)); - state->config.pll_init(fe,NULL); - dib3000mb_tuner_pass_ctrl(fe,0,state->config.pll_addr(fe)); - } + if (state->config.pll_init) + state->config.pll_init(fe); return 0; } @@ -623,7 +616,7 @@ static int dib3000mb_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) { struct dib3000_state* state = fe->demodulator_priv; - *unc = rd(DIB3000MB_REG_UNC); + *unc = rd(DIB3000MB_REG_PACKET_ERROR_RATE); return 0; } @@ -638,9 +631,6 @@ static int dib3000mb_sleep(struct dvb_frontend* fe) static int dib3000mb_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) { tune->min_delay_ms = 800; - tune->step_size = 166667; - tune->max_drift = 166667 * 2; - return 0; } diff --git a/drivers/media/dvb/frontends/dib3000mb_priv.h b/drivers/media/dvb/frontends/dib3000mb_priv.h index 57e61aa5b07b..999b19047816 100644 --- a/drivers/media/dvb/frontends/dib3000mb_priv.h +++ b/drivers/media/dvb/frontends/dib3000mb_priv.h @@ -294,7 +294,7 @@ static u16 dib3000mb_reg_filter_coeffs[] = { static u16 dib3000mb_filter_coeffs[] = { 226, 160, 29, - 979, 998, 19, + 979, 998, 19, 22, 1019, 1006, 1022, 12, 6, 1017, 1017, 3, diff --git a/drivers/media/dvb/frontends/dib3000mc.c b/drivers/media/dvb/frontends/dib3000mc.c index 888f10a5e96b..cd33705a4320 100644 --- a/drivers/media/dvb/frontends/dib3000mc.c +++ b/drivers/media/dvb/frontends/dib3000mc.c @@ -48,8 +48,6 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,2=xfer,4=setfe,8=getfe,16=s #define deb_getf(args...) dprintk(0x08,args) #define deb_stat(args...) dprintk(0x10,args) -static int dib3000mc_tuner_pass_ctrl(struct dvb_frontend *fe, int onoff, u8 pll_addr); - static int dib3000mc_set_impulse_noise(struct dib3000_state * state, int mode, fe_transmit_mode_t transmission_mode, fe_bandwidth_t bandwidth) { @@ -463,10 +461,8 @@ static int dib3000mc_set_frontend(struct dvb_frontend* fe, int search_state,auto_val; u16 val; - if (tuner && state->config.pll_addr && state->config.pll_set) { /* initial call from dvb */ - dib3000mc_tuner_pass_ctrl(fe,1,state->config.pll_addr(fe)); - state->config.pll_set(fe,fep,NULL); - dib3000mc_tuner_pass_ctrl(fe,0,state->config.pll_addr(fe)); + if (tuner && state->config.pll_set) { /* initial call from dvb */ + state->config.pll_set(fe,fep); state->last_tuned_freq = fep->frequency; // if (!scanboost) { @@ -554,19 +550,15 @@ static int dib3000mc_set_frontend(struct dvb_frontend* fe, dib3000mc_set_adp_cfg(state,ofdm->constellation); wr_foreach(dib3000mc_reg_offset, dib3000mc_offset[(ofdm->transmission_mode == TRANSMISSION_MODE_8K)+1]); - - } return 0; } static int dib3000mc_fe_init(struct dvb_frontend* fe, int mobile_mode) { - struct dib3000_state *state; - + struct dib3000_state *state = fe->demodulator_priv; deb_info("init start\n"); - state = fe->demodulator_priv; state->timing_offset = 0; state->timing_offset_comp_done = 0; @@ -649,11 +641,9 @@ static int dib3000mc_fe_init(struct dvb_frontend* fe, int mobile_mode) set_or(DIB3000MC_REG_CLK_CFG_7,DIB3000MC_CLK_CFG_7_DIV_IN_OFF); -/* if (state->config->pll_init) { - dib3000mc_tuner_pass_ctrl(fe,1,state->config.pll_addr(fe)); - state->config->pll_init(fe,NULL); - dib3000mc_tuner_pass_ctrl(fe,0,state->config.pll_addr(fe)); - }*/ + if (state->config.pll_init) + state->config.pll_init(fe); + deb_info("init end\n"); return 0; } @@ -688,7 +678,7 @@ static int dib3000mc_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) { struct dib3000_state* state = fe->demodulator_priv; - *unc = rd(DIB3000MC_REG_PACKET_ERROR_COUNT); + *unc = rd(DIB3000MC_REG_PACKET_ERRORS); return 0; } @@ -737,10 +727,7 @@ static int dib3000mc_sleep(struct dvb_frontend* fe) static int dib3000mc_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) { - tune->min_delay_ms = 2000; - tune->step_size = 166667; - tune->max_drift = 166667 * 2; - + tune->min_delay_ms = 1000; return 0; } diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c index 2a3c2ce7b2aa..f73b5f48e235 100644 --- a/drivers/media/dvb/frontends/dvb-pll.c +++ b/drivers/media/dvb/frontends/dvb-pll.c @@ -1,6 +1,4 @@ /* - * $Id: dvb-pll.c,v 1.7 2005/02/10 11:52:02 kraxel Exp $ - * * descriptions + helper functions for simple dvb plls. * * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs] @@ -114,6 +112,92 @@ struct dvb_pll_desc dvb_pll_unknown_1 = { }; EXPORT_SYMBOL(dvb_pll_unknown_1); +/* Infineon TUA6010XS + * used in Thomson Cable Tuner + */ +struct dvb_pll_desc dvb_pll_tua6010xs = { + .name = "Infineon TUA6010XS", + .min = 44250000, + .max = 858000000, + .count = 3, + .entries = { + { 115750000, 36125000, 62500, 0x8e, 0x03 }, + { 403250000, 36125000, 62500, 0x8e, 0x06 }, + { 999999999, 36125000, 62500, 0x8e, 0x85 }, + }, +}; +EXPORT_SYMBOL(dvb_pll_tua6010xs); + +/* Panasonic env57h1xd5 (some Philips PLL ?) */ +struct dvb_pll_desc dvb_pll_env57h1xd5 = { + .name = "Panasonic ENV57H1XD5", + .min = 44250000, + .max = 858000000, + .count = 4, + .entries = { + { 153000000, 36291666, 166666, 0xc2, 0x41 }, + { 470000000, 36291666, 166666, 0xc2, 0x42 }, + { 526000000, 36291666, 166666, 0xc2, 0x84 }, + { 999999999, 36291666, 166666, 0xc2, 0xa4 }, + }, +}; +EXPORT_SYMBOL(dvb_pll_env57h1xd5); + +/* Philips TDA6650/TDA6651 + * used in Panasonic ENV77H11D5 + */ +static void tda665x_bw(u8 *buf, int bandwidth) +{ + if (bandwidth == BANDWIDTH_8_MHZ) + buf[3] |= 0x08; +} + +struct dvb_pll_desc dvb_pll_tda665x = { + .name = "Philips TDA6650/TDA6651", + .min = 44250000, + .max = 858000000, + .setbw = tda665x_bw, + .count = 12, + .entries = { + { 93834000, 36249333, 166667, 0xca, 0x61 /* 011 0 0 0 01 */ }, + { 123834000, 36249333, 166667, 0xca, 0xa1 /* 101 0 0 0 01 */ }, + { 161000000, 36249333, 166667, 0xca, 0xa1 /* 101 0 0 0 01 */ }, + { 163834000, 36249333, 166667, 0xca, 0xc2 /* 110 0 0 0 10 */ }, + { 253834000, 36249333, 166667, 0xca, 0x62 /* 011 0 0 0 10 */ }, + { 383834000, 36249333, 166667, 0xca, 0xa2 /* 101 0 0 0 10 */ }, + { 443834000, 36249333, 166667, 0xca, 0xc2 /* 110 0 0 0 10 */ }, + { 444000000, 36249333, 166667, 0xca, 0xc3 /* 110 0 0 0 11 */ }, + { 583834000, 36249333, 166667, 0xca, 0x63 /* 011 0 0 0 11 */ }, + { 793834000, 36249333, 166667, 0xca, 0xa3 /* 101 0 0 0 11 */ }, + { 444834000, 36249333, 166667, 0xca, 0xc3 /* 110 0 0 0 11 */ }, + { 861000000, 36249333, 166667, 0xca, 0xe3 /* 111 0 0 0 11 */ }, + } +}; +EXPORT_SYMBOL(dvb_pll_tda665x); + +/* Infineon TUA6034 + * used in LG TDTP E102P + */ +static void tua6034_bw(u8 *buf, int bandwidth) +{ + if (BANDWIDTH_7_MHZ != bandwidth) + buf[3] |= 0x08; +} + +struct dvb_pll_desc dvb_pll_tua6034 = { + .name = "Infineon TUA6034", + .min = 44250000, + .max = 858000000, + .count = 3, + .setbw = tua6034_bw, + .entries = { + { 174500000, 36166667, 62500, 0xce, 0x01 }, + { 230000000, 36166667, 62500, 0xce, 0x02 }, + { 999999999, 36166667, 62500, 0xce, 0x04 }, + }, +}; +EXPORT_SYMBOL(dvb_pll_tua6034); + /* ----------------------------------------------------------- */ /* code */ @@ -160,9 +244,3 @@ EXPORT_SYMBOL(dvb_pll_configure); MODULE_DESCRIPTION("dvb pll library"); MODULE_AUTHOR("Gerd Knorr"); MODULE_LICENSE("GPL"); - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/dvb/frontends/dvb-pll.h b/drivers/media/dvb/frontends/dvb-pll.h index c4c3c56c4a81..b796778624b6 100644 --- a/drivers/media/dvb/frontends/dvb-pll.h +++ b/drivers/media/dvb/frontends/dvb-pll.h @@ -1,5 +1,5 @@ /* - * $Id: dvb-pll.h,v 1.2 2005/02/10 11:43:41 kraxel Exp $ + * descriptions + helper functions for simple dvb plls. */ #ifndef __DVB_PLL_H__ @@ -17,7 +17,7 @@ struct dvb_pll_desc { u32 stepsize; u8 cb1; u8 cb2; - } entries[9]; + } entries[12]; }; extern struct dvb_pll_desc dvb_pll_thomson_dtt7579; @@ -26,6 +26,11 @@ extern struct dvb_pll_desc dvb_pll_thomson_dtt7610; extern struct dvb_pll_desc dvb_pll_lg_z201; extern struct dvb_pll_desc dvb_pll_unknown_1; +extern struct dvb_pll_desc dvb_pll_tua6010xs; +extern struct dvb_pll_desc dvb_pll_env57h1xd5; +extern struct dvb_pll_desc dvb_pll_tua6034; +extern struct dvb_pll_desc dvb_pll_tda665x; + int dvb_pll_configure(struct dvb_pll_desc *desc, u8 *buf, u32 freq, int bandwidth); |
