diff options
Diffstat (limited to 'drivers/i2c/busses')
33 files changed, 347 insertions, 319 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 3badfec75b1c..4010fe92e72b 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -135,11 +135,12 @@ config I2C_I810 help If you say yes to this option, support will be included for the Intel 810/815 family of mainboard I2C interfaces. Specifically, the - following versions of the chipset is supported: + following versions of the chipset are supported: i810AA i810AB i810E i815 + i845G This driver can also be built as a module. If so, the module will be called i2c-i810. diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index f021acd2674e..ba90f5140af6 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -134,7 +134,7 @@ /* -> Read = 1 */ #define ALI1535_SMBIO_EN 0x04 /* SMB I/O Space enable */ - +static struct pci_driver ali1535_driver; static unsigned short ali1535_smba; static DECLARE_MUTEX(i2c_ali1535_sem); @@ -162,7 +162,8 @@ static int ali1535_setup(struct pci_dev *dev) goto exit; } - if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE, "ali1535-smb")) { + if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE, + ali1535_driver.name)) { dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n", ali1535_smba); goto exit; @@ -480,7 +481,6 @@ static struct i2c_adapter ali1535_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static struct pci_device_id ali1535_ids[] = { @@ -513,6 +513,7 @@ static void __devexit ali1535_remove(struct pci_dev *dev) } static struct pci_driver ali1535_driver = { + .owner = THIS_MODULE, .name = "ali1535_smbus", .id_table = ali1535_ids, .probe = ali1535_probe, diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 86947504aea1..f1a62d892425 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -60,6 +60,7 @@ #define HST_CNTL2_SIZEMASK 0x38 +static struct pci_driver ali1563_pci_driver; static unsigned short ali1563_smba; static int ali1563_transaction(struct i2c_adapter * a, int size) @@ -350,7 +351,8 @@ static int __devinit ali1563_setup(struct pci_dev * dev) dev_warn(&dev->dev,"ali1563_smba Uninitialized\n"); goto Err; } - if (!request_region(ali1563_smba,ALI1563_SMB_IOSIZE,"i2c-ali1563")) { + if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE, + ali1563_pci_driver.name)) { dev_warn(&dev->dev,"Could not allocate I/O space"); goto Err; } @@ -406,7 +408,8 @@ static struct pci_device_id __devinitdata ali1563_id_table[] = { MODULE_DEVICE_TABLE (pci, ali1563_id_table); static struct pci_driver ali1563_pci_driver = { - .name = "ali1563_i2c", + .owner = THIS_MODULE, + .name = "ali1563_smbus", .id_table = ali1563_id_table, .probe = ali1563_probe, .remove = __devexit_p(ali1563_remove), diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index b3f50bff39a0..400b08ed4299 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -125,12 +125,13 @@ /* If force_addr is set to anything different from 0, we forcibly enable the device at the given address. */ -static u16 force_addr = 0; +static u16 force_addr; module_param(force_addr, ushort, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"); -static unsigned short ali15x3_smba = 0; +static struct pci_driver ali15x3_driver; +static unsigned short ali15x3_smba; static int ali15x3_setup(struct pci_dev *ALI15X3_dev) { @@ -166,7 +167,8 @@ static int ali15x3_setup(struct pci_dev *ALI15X3_dev) if(force_addr) ali15x3_smba = force_addr & ~(ALI15X3_SMB_IOSIZE - 1); - if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE, "ali15x3-smb")) { + if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE, + ali15x3_driver.name)) { dev_err(&ALI15X3_dev->dev, "ALI15X3_smb region 0x%x already in use!\n", ali15x3_smba); @@ -470,7 +472,6 @@ static struct i2c_adapter ali15x3_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static struct pci_device_id ali15x3_ids[] = { @@ -503,6 +504,7 @@ static void __devexit ali15x3_remove(struct pci_dev *dev) } static struct pci_driver ali15x3_driver = { + .owner = THIS_MODULE, .name = "ali15x3_smbus", .id_table = ali15x3_ids, .probe = ali15x3_probe, diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c index 4e553e8c5cba..f51ab652300a 100644 --- a/drivers/i2c/busses/i2c-amd756-s4882.c +++ b/drivers/i2c/busses/i2c-amd756-s4882.c @@ -169,12 +169,12 @@ static int __init amd756_s4882_init(void) init_MUTEX(&amd756_lock); /* Define the 5 virtual adapters and algorithms structures */ - if (!(s4882_adapter = kmalloc(5 * sizeof(struct i2c_adapter), + if (!(s4882_adapter = kzalloc(5 * sizeof(struct i2c_adapter), GFP_KERNEL))) { error = -ENOMEM; goto ERROR1; } - if (!(s4882_algo = kmalloc(5 * sizeof(struct i2c_algorithm), + if (!(s4882_algo = kzalloc(5 * sizeof(struct i2c_algorithm), GFP_KERNEL))) { error = -ENOMEM; goto ERROR2; diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 6ad0603384b8..de035d137c3f 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -85,8 +85,8 @@ #define AMD756_PROCESS_CALL 0x04 #define AMD756_BLOCK_DATA 0x05 - -static unsigned short amd756_ioport = 0; +static struct pci_driver amd756_driver; +static unsigned short amd756_ioport; /* SMBUS event = I/O 28-29 bit 11 @@ -303,7 +303,6 @@ struct i2c_adapter amd756_smbus = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; enum chiptype { AMD756, AMD766, AMD768, NFORCE, AMD8111 }; @@ -365,7 +364,7 @@ static int __devinit amd756_probe(struct pci_dev *pdev, amd756_ioport += SMB_ADDR_OFFSET; } - if (!request_region(amd756_ioport, SMB_IOSIZE, "amd756-smbus")) { + if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) { dev_err(&pdev->dev, "SMB region 0x%x already in use!\n", amd756_ioport); return -ENODEV; @@ -402,6 +401,7 @@ static void __devexit amd756_remove(struct pci_dev *dev) } static struct pci_driver amd756_driver = { + .owner = THIS_MODULE, .name = "amd756_smbus", .id_table = amd756_ids, .probe = amd756_probe, diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 45ea24ba14d5..f3b79a68dbec 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -30,6 +30,8 @@ struct amd_smbus { int size; }; +static struct pci_driver amd8111_driver; + /* * AMD PCI control registers definitions. */ @@ -242,7 +244,6 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl break; case I2C_SMBUS_BLOCK_PROC_CALL: - protocol |= pec; len = min_t(u8, data->block[0], 31); amd_ec_write(smbus, AMD_SMB_CMD, command); amd_ec_write(smbus, AMD_SMB_BCNT, len); @@ -252,13 +253,6 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl read_write = I2C_SMBUS_READ; break; - case I2C_SMBUS_WORD_DATA_PEC: - case I2C_SMBUS_BLOCK_DATA_PEC: - case I2C_SMBUS_PROC_CALL_PEC: - case I2C_SMBUS_BLOCK_PROC_CALL_PEC: - dev_warn(&adap->dev, "Unexpected software PEC transaction %d\n.", size); - return -1; - default: dev_warn(&adap->dev, "Unsupported transaction %d\n", size); return -1; @@ -343,16 +337,15 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_ if (~pci_resource_flags(dev, 0) & IORESOURCE_IO) return -ENODEV; - smbus = kmalloc(sizeof(struct amd_smbus), GFP_KERNEL); + smbus = kzalloc(sizeof(struct amd_smbus), GFP_KERNEL); if (!smbus) return -ENOMEM; - memset(smbus, 0, sizeof(struct amd_smbus)); smbus->dev = dev; smbus->base = pci_resource_start(dev, 0); smbus->size = pci_resource_len(dev, 0); - if (!request_region(smbus->base, smbus->size, "amd8111 SMBus 2.0")) + if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) goto out_kfree; smbus->adapter.owner = THIS_MODULE; @@ -391,6 +384,7 @@ static void __devexit amd8111_remove(struct pci_dev *dev) } static struct pci_driver amd8111_driver = { + .owner = THIS_MODULE, .name = "amd8111_smbus2", .id_table = amd8111_ids, .probe = amd8111_probe, diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index 6930b660e508..59f8308c2356 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -22,7 +22,7 @@ /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even Frodo Looijaard <frodol@dds.nl> */ -/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of +/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of for Alpha Processor Inc. UP-2000(+) boards */ #include <linux/kernel.h> @@ -46,12 +46,14 @@ #define DEFAULT_BASE 0x330 static int base; +static u8 __iomem *base_iomem; + static int irq; static int clock = 0x1c; static int own = 0x55; static int mmapped; -/* vdovikin: removed static struct i2c_pcf_isa gpi; code - +/* vdovikin: removed static struct i2c_pcf_isa gpi; code - this module in real supports only one device, due to missing arguments in some functions, called from the algo-pcf module. Sometimes it's need to be rewriten - but for now just remove this for simpler reading */ @@ -60,40 +62,33 @@ static wait_queue_head_t pcf_wait; static int pcf_pending; static spinlock_t lock; +static struct i2c_adapter pcf_isa_ops; + /* ----- local functions ---------------------------------------------- */ static void pcf_isa_setbyte(void *data, int ctl, int val) { - int address = ctl ? (base + 1) : base; + u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem; /* enable irq if any specified for serial operation */ if (ctl && irq && (val & I2C_PCF_ESO)) { val |= I2C_PCF_ENI; } - pr_debug("i2c-elektor: Write 0x%X 0x%02X\n", address, val & 255); - - switch (mmapped) { - case 0: /* regular I/O */ - outb(val, address); - break; - case 2: /* double mapped I/O needed for UP2000 board, - I don't know why this... */ - writeb(val, (void *)address); - /* fall */ - case 1: /* memory mapped I/O */ - writeb(val, (void *)address); - break; - } + pr_debug("%s: Write %p 0x%02X\n", pcf_isa_ops.name, address, val); + iowrite8(val, address); +#ifdef __alpha__ + /* API UP2000 needs some hardware fudging to make the write stick */ + iowrite8(val, address); +#endif } static int pcf_isa_getbyte(void *data, int ctl) { - int address = ctl ? (base + 1) : base; - int val = mmapped ? readb((void *)address) : inb(address); - - pr_debug("i2c-elektor: Read 0x%X 0x%02X\n", address, val); + u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem; + int val = ioread8(address); + pr_debug("%s: Read %p 0x%02X\n", pcf_isa_ops.name, address, val); return (val); } @@ -149,16 +144,40 @@ static int pcf_isa_init(void) { spin_lock_init(&lock); if (!mmapped) { - if (!request_region(base, 2, "i2c (isa bus adapter)")) { - printk(KERN_ERR - "i2c-elektor: requested I/O region (0x%X:2) " - "is in use.\n", base); + if (!request_region(base, 2, pcf_isa_ops.name)) { + printk(KERN_ERR "%s: requested I/O region (%#x:2) is " + "in use\n", pcf_isa_ops.name, base); + return -ENODEV; + } + base_iomem = ioport_map(base, 2); + if (!base_iomem) { + printk(KERN_ERR "%s: remap of I/O region %#x failed\n", + pcf_isa_ops.name, base); + release_region(base, 2); + return -ENODEV; + } + } else { + if (!request_mem_region(base, 2, pcf_isa_ops.name)) { + printk(KERN_ERR "%s: requested memory region (%#x:2) " + "is in use\n", pcf_isa_ops.name, base); + return -ENODEV; + } + base_iomem = ioremap(base, 2); + if (base_iomem == NULL) { + printk(KERN_ERR "%s: remap of memory region %#x " + "failed\n", pcf_isa_ops.name, base); + release_mem_region(base, 2); return -ENODEV; } } + pr_debug("%s: registers %#x remapped to %p\n", pcf_isa_ops.name, base, + base_iomem); + if (irq > 0) { - if (request_irq(irq, pcf_isa_handler, 0, "PCF8584", NULL) < 0) { - printk(KERN_ERR "i2c-elektor: Request irq%d failed\n", irq); + if (request_irq(irq, pcf_isa_handler, 0, pcf_isa_ops.name, + NULL) < 0) { + printk(KERN_ERR "%s: Request irq%d failed\n", + pcf_isa_ops.name, irq); irq = 0; } else enable_irq(irq); @@ -186,47 +205,49 @@ static struct i2c_adapter pcf_isa_ops = { .class = I2C_CLASS_HWMON, .id = I2C_HW_P_ELEK, .algo_data = &pcf_isa_data, - .name = "PCF8584 ISA adapter", + .name = "i2c-elektor", }; -static int __init i2c_pcfisa_init(void) +static int __init i2c_pcfisa_init(void) { #ifdef __alpha__ - /* check to see we have memory mapped PCF8584 connected to the + /* check to see we have memory mapped PCF8584 connected to the Cypress cy82c693 PCI-ISA bridge as on UP2000 board */ if (base == 0) { struct pci_dev *cy693_dev; - - cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ, + + cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, NULL); if (cy693_dev) { - char config; + unsigned char config; /* yeap, we've found cypress, let's check config */ if (!pci_read_config_byte(cy693_dev, 0x47, &config)) { - - pr_debug("i2c-elektor: found cy82c693, config register 0x47 = 0x%02x.\n", config); + + pr_debug("%s: found cy82c693, config " + "register 0x47 = 0x%02x\n", + pcf_isa_ops.name, config); /* UP2000 board has this register set to 0xe1, - but the most significant bit as seems can be + but the most significant bit as seems can be reset during the proper initialisation - sequence if guys from API decides to do that - (so, we can even enable Tsunami Pchip - window for the upper 1 Gb) */ + sequence if guys from API decides to do that + (so, we can even enable Tsunami Pchip + window for the upper 1 Gb) */ /* so just check for ROMCS at 0xe0000, - ROMCS enabled for writes + ROMCS enabled for writes and external XD Bus buffer in use. */ if ((config & 0x7f) == 0x61) { /* seems to be UP2000 like board */ base = 0xe0000; - /* I don't know why we need to - write twice */ - mmapped = 2; - /* UP2000 drives ISA with + mmapped = 1; + /* UP2000 drives ISA with 8.25 MHz (PCI/4) clock (this can be read from cypress) */ clock = I2C_PCF_CLK | I2C_PCF_TRNS90; - printk(KERN_INFO "i2c-elektor: found API UP2000 like board, will probe PCF8584 later.\n"); + pr_info("%s: found API UP2000 like " + "board, will probe PCF8584 " + "later\n", pcf_isa_ops.name); } } pci_dev_put(cy693_dev); @@ -236,12 +257,11 @@ static int __init i2c_pcfisa_init(void) /* sanity checks for mmapped I/O */ if (mmapped && base < 0xc8000) { - printk(KERN_ERR "i2c-elektor: incorrect base address (0x%0X) specified for mmapped I/O.\n", base); + printk(KERN_ERR "%s: incorrect base address (%#x) specified " + "for mmapped I/O\n", pcf_isa_ops.name, base); return -ENODEV; } - printk(KERN_INFO "i2c-elektor: i2c pcf8584-isa adapter driver\n"); - if (base == 0) { base = DEFAULT_BASE; } @@ -251,8 +271,8 @@ static int __init i2c_pcfisa_init(void) return -ENODEV; if (i2c_pcf_add_bus(&pcf_isa_ops) < 0) goto fail; - - printk(KERN_ERR "i2c-elektor: found device at %#x.\n", base); + + dev_info(&pcf_isa_ops.dev, "found device at %#x\n", base); return 0; @@ -262,8 +282,13 @@ static int __init i2c_pcfisa_init(void) free_irq(irq, NULL); } - if (!mmapped) - release_region(base , 2); + if (!mmapped) { + ioport_unmap(base_iomem); + release_region(base, 2); + } else { + iounmap(base_iomem); + release_mem_region(base, 2); + } return -ENODEV; } @@ -276,8 +301,13 @@ static void i2c_pcfisa_exit(void) free_irq(irq, NULL); } - if (!mmapped) - release_region(base , 2); + if (!mmapped) { + ioport_unmap(base_iomem); + release_region(base, 2); + } else { + iounmap(base_iomem); + release_mem_region(base, 2); + } } MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>"); diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c index e0cb3b0f92fa..1b5354e24bf5 100644 --- a/drivers/i2c/busses/i2c-hydra.c +++ b/drivers/i2c/busses/i2c-hydra.c @@ -155,6 +155,7 @@ static void __devexit hydra_remove(struct pci_dev *dev) static struct pci_driver hydra_driver = { + .owner = THIS_MODULE, .name = "hydra_smbus", .id_table = hydra_ids, .probe = hydra_probe, diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 709beab76609..4f63195069da 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -52,10 +52,6 @@ #include <linux/i2c.h> #include <asm/io.h> -#ifdef I2C_FUNC_SMBUS_BLOCK_DATA_PEC -#define HAVE_PEC -#endif - /* I801 SMBus address offsets */ #define SMBHSTSTS (0 + i801_smba) #define SMBHSTCNT (2 + i801_smba) @@ -106,10 +102,11 @@ MODULE_PARM_DESC(force_addr, "EXTREMELY DANGEROUS!"); static int i801_transaction(void); -static int i801_block_transaction(union i2c_smbus_data *data, - char read_write, int command); +static int i801_block_transaction(union i2c_smbus_data *data, char read_write, + int command, int hwpec); static unsigned short i801_smba; +static struct pci_driver i801_driver; static struct pci_dev *I801_dev; static int isich4; @@ -143,7 +140,7 @@ static int i801_setup(struct pci_dev *dev) } } - if (!request_region(i801_smba, (isich4 ? 16 : 8), "i801-smbus")) { + if (!request_region(i801_smba, (isich4 ? 16 : 8), i801_driver.name)) { dev_err(&dev->dev, "I801_smb region 0x%x already in use!\n", i801_smba); error_return = -EBUSY; @@ -252,7 +249,7 @@ static int i801_transaction(void) /* All-inclusive block transaction function */ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, - int command) + int command, int hwpec) { int i, len; int smbcmd; @@ -391,8 +388,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, goto END; } -#ifdef HAVE_PEC - if(isich4 && command == I2C_SMBUS_BLOCK_DATA_PEC) { + if (hwpec) { /* wait for INTR bit as advised by Intel */ timeout = 0; do { @@ -406,7 +402,6 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, } outb_p(temp, SMBHSTSTS); } -#endif result = 0; END: if (command == I2C_SMBUS_I2C_BLOCK_DATA) { @@ -421,14 +416,13 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) { - int hwpec = 0; + int hwpec; int block = 0; int ret, xact = 0; -#ifdef HAVE_PEC - if(isich4) - hwpec = (flags & I2C_CLIENT_PEC) != 0; -#endif + hwpec = isich4 && (flags & I2C_CLIENT_PEC) + && size != I2C_SMBUS_QUICK + && size != I2C_SMBUS_I2C_BLOCK_DATA; switch (size) { case I2C_SMBUS_QUICK: @@ -463,11 +457,6 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, break; case I2C_SMBUS_BLOCK_DATA: case I2C_SMBUS_I2C_BLOCK_DATA: -#ifdef HAVE_PEC - case I2C_SMBUS_BLOCK_DATA_PEC: - if(hwpec && size == I2C_SMBUS_BLOCK_DATA) - size = I2C_SMBUS_BLOCK_DATA_PEC; -#endif outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); outb_p(command, SMBHSTCMD); @@ -479,27 +468,18 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, return -1; } -#ifdef HAVE_PEC - if(isich4 && hwpec) { - if(size != I2C_SMBUS_QUICK && - size != I2C_SMBUS_I2C_BLOCK_DATA) - outb_p(1, SMBAUXCTL); /* enable HW PEC */ - } -#endif + if (hwpec) + outb_p(1, SMBAUXCTL); /* enable hardware PEC */ + if(block) - ret = i801_block_transaction(data, read_write, size); + ret = i801_block_transaction(data, read_write, size, hwpec); else { outb_p(xact | ENABLE_INT9, SMBHSTCNT); ret = i801_transaction(); } -#ifdef HAVE_PEC - if(isich4 && hwpec) { - if(size != I2C_SMBUS_QUICK && - size != I2C_SMBUS_I2C_BLOCK_DATA) - outb_p(0, SMBAUXCTL); - } -#endif + if (hwpec) + outb_p(0, SMBAUXCTL); /* disable hardware PEC */ if(block) return ret; @@ -526,12 +506,7 @@ static u32 i801_func(struct i2c_adapter *adapter) return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK -#ifdef HAVE_PEC - | (isich4 ? I2C_FUNC_SMBUS_BLOCK_DATA_PEC | - I2C_FUNC_SMBUS_HWPEC_CALC - : 0) -#endif - ; + | (isich4 ? I2C_FUNC_SMBUS_HWPEC_CALC : 0); } static struct i2c_algorithm smbus_algorithm = { @@ -543,7 +518,6 @@ static struct i2c_adapter i801_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static struct pci_device_id i801_ids[] = { @@ -586,6 +560,7 @@ static void __devexit i801_remove(struct pci_dev *dev) } static struct pci_driver i801_driver = { + .owner = THIS_MODULE, .name = "i801_smbus", .id_table = i801_ids, .probe = i801_probe, diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c index 0ff7016e0629..52bc30593bd7 100644 --- a/drivers/i2c/busses/i2c-i810.c +++ b/drivers/i2c/busses/i2c-i810.c @@ -32,6 +32,7 @@ i810AB 7123 i810E 7125 i815 1132 + i845G 2562 */ #include <linux/kernel.h> @@ -232,6 +233,7 @@ static void __devexit i810_remove(struct pci_dev *dev) } static struct pci_driver i810_driver = { + .owner = THIS_MODULE, .name = "i810_smbus", .id_table = i810_ids, .probe = i810_probe, diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index a3ed9590f028..1a587253d716 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -672,13 +672,12 @@ static int __devinit iic_probe(struct ocp_device *ocp){ printk(KERN_WARNING"ibm-iic%d: missing additional data!\n", ocp->def->index); - if (!(dev = kmalloc(sizeof(*dev), GFP_KERNEL))){ + if (!(dev = kzalloc(sizeof(*dev), GFP_KERNEL))) { printk(KERN_CRIT "ibm-iic%d: failed to allocate device data\n", ocp->def->index); return -ENOMEM; } - memset(dev, 0, sizeof(*dev)); dev->idx = ocp->def->index; ocp_set_drvdata(ocp, dev); diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index 7bd9102db701..9888fae1f37a 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -43,7 +43,7 @@ #include "i2c-iop3xx.h" /* global unit counter */ -static int i2c_id = 0; +static int i2c_id; static inline unsigned char iic_cook_addr(struct i2c_msg *msg) @@ -440,19 +440,17 @@ iop3xx_i2c_probe(struct device *dev) struct i2c_adapter *new_adapter; struct i2c_algo_iop3xx_data *adapter_data; - new_adapter = kmalloc(sizeof(struct i2c_adapter), GFP_KERNEL); + new_adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); if (!new_adapter) { ret = -ENOMEM; goto out; } - memset((void*)new_adapter, 0, sizeof(*new_adapter)); - adapter_data = kmalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL); + adapter_data = kzalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL); if (!adapter_data) { ret = -ENOMEM; goto free_adapter; } - memset((void*)adapter_data, 0, sizeof(*adapter_data)); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -525,6 +523,7 @@ out: static struct device_driver iop3xx_i2c_driver = { + .owner = THIS_MODULE, .name = "IOP3xx-I2C", .bus = &platform_bus_type, .probe = iop3xx_i2c_probe, diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c index bdc6806dafae..4fdc02411609 100644 --- a/drivers/i2c/busses/i2c-isa.c +++ b/drivers/i2c/busses/i2c-isa.c @@ -92,6 +92,7 @@ int i2c_isa_add_driver(struct i2c_driver *driver) /* Add the driver to the list of i2c drivers in the driver core */ driver->driver.name = driver->name; + driver->driver.owner = driver->owner; driver->driver.bus = &i2c_bus_type; driver->driver.probe = i2c_isa_device_probe; driver->driver.remove = i2c_isa_device_remove; diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c index 1956af382cd8..42016ee6ef13 100644 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ b/drivers/i2c/busses/i2c-ixp2000.c @@ -36,6 +36,8 @@ #include <asm/hardware.h> /* Pick up IXP2000-specific bits */ #include <asm/arch/gpio.h> +static struct device_driver ixp2000_i2c_driver; + static inline int ixp2000_scl_pin(void *data) { return ((struct ixp2000_i2c_pins*)data)->scl_pin; @@ -104,11 +106,10 @@ static int ixp2000_i2c_probe(struct device *dev) struct platform_device *plat_dev = to_platform_device(dev); struct ixp2000_i2c_pins *gpio = plat_dev->dev.platform_data; struct ixp2000_i2c_data *drv_data = - kmalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL); + kzalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL); if (!drv_data) return -ENOMEM; - memzero(drv_data, sizeof(*drv_data)); drv_data->gpio_pins = gpio; drv_data->algo_data.data = gpio; @@ -121,6 +122,8 @@ static int ixp2000_i2c_probe(struct device *dev) drv_data->algo_data.timeout = 100; drv_data->adapter.id = I2C_HW_B_IXP2000, + strlcpy(drv_data->adapter.name, ixp2000_i2c_driver.name, + I2C_NAME_SIZE); drv_data->adapter.algo_data = &drv_data->algo_data, drv_data->adapter.dev.parent = &plat_dev->dev; @@ -142,6 +145,7 @@ static int ixp2000_i2c_probe(struct device *dev) } static struct device_driver ixp2000_i2c_driver = { + .owner = THIS_MODULE, .name = "IXP2000-I2C", .bus = &platform_bus_type, .probe = ixp2000_i2c_probe, diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c index f6f5ca31fdba..69303ab65e04 100644 --- a/drivers/i2c/busses/i2c-ixp4xx.c +++ b/drivers/i2c/busses/i2c-ixp4xx.c @@ -35,6 +35,8 @@ #include <asm/hardware.h> /* Pick up IXP4xx-specific bits */ +static struct device_driver ixp4xx_i2c_driver; + static inline int ixp4xx_scl_pin(void *data) { return ((struct ixp4xx_i2c_pins*)data)->scl_pin; @@ -105,12 +107,11 @@ static int ixp4xx_i2c_probe(struct device *dev) struct platform_device *plat_dev = to_platform_device(dev); struct ixp4xx_i2c_pins *gpio = plat_dev->dev.platform_data; struct ixp4xx_i2c_data *drv_data = - kmalloc(sizeof(struct ixp4xx_i2c_data), GFP_KERNEL); + kzalloc(sizeof(struct ixp4xx_i2c_data), GFP_KERNEL); if(!drv_data) return -ENOMEM; - memzero(drv_data, sizeof(struct ixp4xx_i2c_data)); drv_data->gpio_pins = gpio; /* @@ -129,6 +130,8 @@ static int ixp4xx_i2c_probe(struct device *dev) drv_data->algo_data.timeout = 100; drv_data->adapter.id = I2C_HW_B_IXP4XX; + strlcpy(drv_data->adapter.name, ixp4xx_i2c_driver.name, + I2C_NAME_SIZE); drv_data->adapter.algo_data = &drv_data->algo_data; drv_data->adapter.dev.parent = &plat_dev->dev; @@ -151,6 +154,7 @@ static int ixp4xx_i2c_probe(struct device *dev) } static struct device_driver ixp4xx_i2c_driver = { + .owner = THIS_MODULE, .name = "IXP4XX-I2C", .bus = &platform_bus_type, .probe = ixp4xx_i2c_probe, diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c index eff5896ce865..d61f748278fc 100644 --- a/drivers/i2c/busses/i2c-keywest.c +++ b/drivers/i2c/busses/i2c-keywest.c @@ -535,13 +535,12 @@ create_iface(struct device_node *np, struct device *dev) tsize = sizeof(struct keywest_iface) + (sizeof(struct keywest_chan) + 4) * nchan; - iface = (struct keywest_iface *) kmalloc(tsize, GFP_KERNEL); + iface = kzalloc(tsize, GFP_KERNEL); if (iface == NULL) { printk(KERN_ERR "i2c-keywest: can't allocate inteface !\n"); pmac_low_i2c_unlock(np); return -ENOMEM; } - memset(iface, 0, tsize); spin_lock_init(&iface->lock); init_completion(&iface->complete); iface->node = of_node_get(np); @@ -716,6 +715,7 @@ static struct of_device_id i2c_keywest_match[] = static struct macio_driver i2c_keywest_macio_driver = { + .owner = THIS_MODULE, .name = "i2c-keywest", .match_table = i2c_keywest_match, .probe = create_iface_macio, @@ -724,6 +724,7 @@ static struct macio_driver i2c_keywest_macio_driver = static struct of_platform_driver i2c_keywest_of_platform_driver = { + .owner = THIS_MODULE, .name = "i2c-keywest", .match_table = i2c_keywest_match, .probe = create_iface_of_platform, diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index f065583ddcf1..8491633005b8 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -296,10 +296,9 @@ static int fsl_i2c_probe(struct device *device) pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data; - if (!(i2c = kmalloc(sizeof(*i2c), GFP_KERNEL))) { + if (!(i2c = kzalloc(sizeof(*i2c), GFP_KERNEL))) { return -ENOMEM; } - memset(i2c, 0, sizeof(*i2c)); i2c->irq = platform_get_irq(pdev, 0); i2c->flags = pdata->device_flags; @@ -361,6 +360,7 @@ static int fsl_i2c_remove(struct device *device) /* Structure for a device driver */ static struct device_driver fsl_i2c_driver = { + .owner = THIS_MODULE, .name = "fsl-i2c", .bus = &platform_bus_type, .probe = fsl_i2c_probe, diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 99abca45fece..d0d2a6f1386e 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -500,13 +500,10 @@ mv64xxx_i2c_probe(struct device *dev) if ((pd->id != 0) || !pdata) return -ENODEV; - drv_data = kmalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL); - + drv_data = kzalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL); if (!drv_data) return -ENOMEM; - memset(drv_data, 0, sizeof(struct mv64xxx_i2c_data)); - if (mv64xxx_i2c_map_regs(pd, drv_data)) { rc = -ENODEV; goto exit_kfree; @@ -570,6 +567,7 @@ mv64xxx_i2c_remove(struct device *dev) } static struct device_driver mv64xxx_i2c_driver = { + .owner = THIS_MODULE, .name = MV64XXX_I2C_CTLR_NAME, .bus = &platform_bus_type, .probe = mv64xxx_i2c_probe, diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index fe9c0f42a2b7..fd26036e68a3 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -97,6 +97,7 @@ struct nforce2_smbus { #define NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA 0x4a #define NVIDIA_SMB_PRTCL_PEC 0x80 +static struct pci_driver nforce2_driver; static s32 nforce2_access(struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, @@ -113,7 +114,6 @@ static struct i2c_adapter nforce2_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; /* Return -1 on error. See smbus.h for more information */ @@ -188,13 +188,6 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n"); return -1; - case I2C_SMBUS_WORD_DATA_PEC: - case I2C_SMBUS_BLOCK_DATA_PEC: - case I2C_SMBUS_PROC_CALL_PEC: - case I2C_SMBUS_BLOCK_PROC_CALL_PEC: - dev_err(&adap->dev, "Unexpected software PEC transaction %d\n.", size); - return -1; - default: dev_err(&adap->dev, "Unsupported transaction %d\n", size); return -1; @@ -285,7 +278,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int reg, smbus->base = iobase & 0xfffc; smbus->size = 8; - if (!request_region(smbus->base, smbus->size, "nForce2 SMBus")) { + if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) { dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n", smbus->base, smbus->base+smbus->size-1, name); return -1; @@ -313,10 +306,8 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_ int res1, res2; /* we support 2 SMBus adapters */ - if (!(smbuses = (void *)kmalloc(2*sizeof(struct nforce2_smbus), - GFP_KERNEL))) + if (!(smbuses = kzalloc(2*sizeof(struct nforce2_smbus), GFP_KERNEL))) return -ENOMEM; - memset (smbuses, 0, 2*sizeof(struct nforce2_smbus)); pci_set_drvdata(dev, smbuses); /* SMBus adapter 1 */ @@ -356,6 +347,7 @@ static void __devexit nforce2_remove(struct pci_dev *dev) } static struct pci_driver nforce2_driver = { + .owner = THIS_MODULE, .name = "nForce2_smbus", .id_table = nforce2_ids, .probe = nforce2_probe, diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index 71a2502fe069..2854d858fc9b 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -155,12 +155,11 @@ static void i2c_parport_attach (struct parport *port) { struct i2c_par *adapter; - adapter = kmalloc(sizeof(struct i2c_par), GFP_KERNEL); + adapter = kzalloc(sizeof(struct i2c_par), GFP_KERNEL); if (adapter == NULL) { - printk(KERN_ERR "i2c-parport: Failed to kmalloc\n"); + printk(KERN_ERR "i2c-parport: Failed to kzalloc\n"); return; } - memset(adapter, 0x00, sizeof(struct i2c_par)); pr_debug("i2c-parport: attaching to %s\n", port->name); adapter->pdev = parport_register_device(port, "i2c-parport", @@ -232,7 +231,7 @@ static void i2c_parport_detach (struct parport *port) } } -static struct parport_driver i2c_driver = { +static struct parport_driver i2c_parport_driver = { .name = "i2c-parport", .attach = i2c_parport_attach, .detach = i2c_parport_detach, @@ -250,12 +249,12 @@ static int __init i2c_parport_init(void) type = 0; } - return parport_register_driver(&i2c_driver); + return parport_register_driver(&i2c_parport_driver); } static void __exit i2c_parport_exit(void) { - parport_unregister_driver(&i2c_driver); + parport_unregister_driver(&i2c_parport_driver); } MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 6d48a4da7bed..7d63eec423fe 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -90,13 +90,13 @@ struct sd { /* If force is set to anything different from 0, we forcibly enable the PIIX4. DANGEROUS! */ -static int force = 0; +static int force; module_param (force, int, 0); MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!"); /* If force_addr is set to anything different from 0, we forcibly enable the PIIX4 at the given address. VERY DANGEROUS! */ -static int force_addr = 0; +static int force_addr; module_param (force_addr, int, 0); MODULE_PARM_DESC(force_addr, "Forcibly enable the PIIX4 at the given address. " @@ -104,14 +104,15 @@ MODULE_PARM_DESC(force_addr, /* If fix_hstcfg is set to anything different from 0, we reset one of the registers to be a valid value. */ -static int fix_hstcfg = 0; +static int fix_hstcfg; module_param (fix_hstcfg, int, 0); MODULE_PARM_DESC(fix_hstcfg, "Fix config register. Needed on some boards (Force CPCI735)."); static int piix4_transaction(void); -static unsigned short piix4_smba = 0; +static unsigned short piix4_smba; +static struct pci_driver piix4_driver; static struct i2c_adapter piix4_adapter; static struct dmi_system_id __devinitdata piix4_dmi_table[] = { @@ -157,7 +158,7 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, } } - if (!request_region(piix4_smba, SMBIOSIZE, "piix4-smbus")) { + if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { dev_err(&PIIX4_dev->dev, "SMB region 0x%x already in use!\n", piix4_smba); return -ENODEV; @@ -407,7 +408,6 @@ static struct i2c_adapter piix4_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static struct pci_device_id piix4_ids[] = { @@ -462,6 +462,7 @@ static void __devexit piix4_remove(struct pci_dev *dev) } static struct pci_driver piix4_driver = { + .owner = THIS_MODULE, .name = "piix4_smbus", .id_table = piix4_ids, .probe = piix4_probe, diff --git a/drivers/i2c/busses/i2c-pmac-smu.c b/drivers/i2c/busses/i2c-pmac-smu.c index 8a9f5648a23d..bfefe7f7a53d 100644 --- a/drivers/i2c/busses/i2c-pmac-smu.c +++ b/drivers/i2c/busses/i2c-pmac-smu.c @@ -211,12 +211,11 @@ static int create_iface(struct device_node *np, struct device *dev) } busid = *reg; - iface = kmalloc(sizeof(struct smu_iface), GFP_KERNEL); + iface = kzalloc(sizeof(struct smu_iface), GFP_KERNEL); if (iface == NULL) { printk(KERN_ERR "i2c-pmac-smu: can't allocate inteface !\n"); return -ENOMEM; } - memset(iface, 0, sizeof(struct smu_iface)); init_completion(&iface->complete); iface->busid = busid; diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c index 83fd16d61ce5..42cb1d8ca659 100644 --- a/drivers/i2c/busses/i2c-prosavage.c +++ b/drivers/i2c/busses/i2c-prosavage.c @@ -83,11 +83,6 @@ struct s_i2c_chip { /* * i2c configuration */ -#ifndef I2C_HW_B_S3VIA -#define I2C_HW_B_S3VIA 0x18 /* S3VIA ProSavage adapter */ -#endif - -/* delays */ #define CYCLE_DELAY 10 #define TIMEOUT (HZ / 2) @@ -241,14 +236,12 @@ static int __devinit prosavage_probe(struct pci_dev *dev, const struct pci_devic struct s_i2c_chip *chip; struct s_i2c_bus *bus; - pci_set_drvdata(dev, kmalloc(sizeof(struct s_i2c_chip), GFP_KERNEL)); + pci_set_drvdata(dev, kzalloc(sizeof(struct s_i2c_chip), GFP_KERNEL)); chip = (struct s_i2c_chip *)pci_get_drvdata(dev); if (chip == NULL) { return -ENOMEM; } - memset(chip, 0, sizeof(struct s_i2c_chip)); - base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK; len = dev->resource[0].end - base + 1; chip->mmio = ioremap_nocache(base, len); @@ -308,6 +301,7 @@ static struct pci_device_id prosavage_pci_tbl[] = { MODULE_DEVICE_TABLE (pci, prosavage_pci_tbl); static struct pci_driver prosavage_driver = { + .owner = THIS_MODULE, .name = "prosavage_smbus", .id_table = prosavage_pci_tbl, .probe = prosavage_probe, diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 69fa282df2d5..6ced28e90070 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -896,6 +896,7 @@ static int s3c24xx_i2c_resume(struct device *dev) /* device driver for platform bus bits */ static struct device_driver s3c2410_i2c_driver = { + .owner = THIS_MODULE, .name = "s3c2410-i2c", .bus = &platform_bus_type, .probe = s3c24xx_i2c_probe, @@ -904,6 +905,7 @@ static struct device_driver s3c2410_i2c_driver = { }; static struct device_driver s3c2440_i2c_driver = { + .owner = THIS_MODULE, .name = "s3c2440-i2c", .bus = &platform_bus_type, .probe = s3c24xx_i2c_probe, diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c index 0c8518298e4d..aebe87ba4033 100644 --- a/drivers/i2c/busses/i2c-savage4.c +++ b/drivers/i2c/busses/i2c-savage4.c @@ -179,6 +179,7 @@ static void __devexit savage4_remove(struct pci_dev *dev) } static struct pci_driver savage4_driver = { + .owner = THIS_MODULE, .name = "savage4_smbus", .id_table = savage4_ids, .probe = savage4_probe, diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 080318d6f54b..3ad27c3ba15b 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -123,11 +123,12 @@ static int blacklist[] = { /* If force_addr is set to anything different from 0, we forcibly enable the device at the given address. */ -static u16 force_addr = 0; +static u16 force_addr; module_param(force_addr, ushort, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"); -static unsigned short sis5595_base = 0; +static struct pci_driver sis5595_driver; +static unsigned short sis5595_base; static u8 sis5595_read(u8 reg) { @@ -172,7 +173,8 @@ static int sis5595_setup(struct pci_dev *SIS5595_dev) /* NB: We grab just the two SMBus registers here, but this may still * interfere with ACPI :-( */ - if (!request_region(sis5595_base + SMB_INDEX, 2, "sis5595-smbus")) { + if (!request_region(sis5595_base + SMB_INDEX, 2, + sis5595_driver.name)) { dev_err(&SIS5595_dev->dev, "SMBus registers 0x%04x-0x%04x already in use!\n", sis5595_base + SMB_INDEX, sis5595_base + SMB_INDEX + 1); return -ENODEV; @@ -364,7 +366,6 @@ static struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis5595_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, - .name = "unset", .algo = &smbus_algorithm, }; @@ -397,6 +398,7 @@ static void __devexit sis5595_remove(struct pci_dev *dev) } static struct pci_driver sis5595_driver = { + .owner = THIS_MODULE, .name = "sis5595_smbus", .id_table = sis5595_ids, .probe = sis5595_probe, diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 86f0f448fa0b..7f49e5fd3ff0 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -92,6 +92,8 @@ #define SIS630_PCALL 0x04 #define SIS630_BLOCK_DATA 0x05 +static struct pci_driver sis630_driver; + /* insmod parameters */ static int high_clock; static int force; @@ -101,7 +103,7 @@ module_param(force, bool, 0); MODULE_PARM_DESC(force, "Forcibly enable the SIS630. DANGEROUS!"); /* acpi base address */ -static unsigned short acpi_base = 0; +static unsigned short acpi_base; /* supported chips */ static int supported[] = { @@ -432,7 +434,8 @@ static int sis630_setup(struct pci_dev *sis630_dev) dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04x\n", acpi_base); /* Everything is happy, let's grab the memory and set things up. */ - if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION, "sis630-smbus")) { + if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION, + sis630_driver.name)) { dev_err(&sis630_dev->dev, "SMBus registers 0x%04x-0x%04x already " "in use!\n", acpi_base + SMB_STS, acpi_base + SMB_SAA); goto exit; @@ -455,7 +458,6 @@ static struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis630_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, - .name = "unset", .algo = &smbus_algorithm, }; @@ -494,6 +496,7 @@ static void __devexit sis630_remove(struct pci_dev *dev) static struct pci_driver sis630_driver = { + .owner = THIS_MODULE, .name = "sis630_smbus", .id_table = sis630_ids, .probe = sis630_probe, diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index ead2ff3cf60e..6a134c091324 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -82,8 +82,9 @@ #define SIS96x_PROC_CALL 0x04 #define SIS96x_BLOCK_DATA 0x05 +static struct pci_driver sis96x_driver; static struct i2c_adapter sis96x_adapter; -static u16 sis96x_smbus_base = 0; +static u16 sis96x_smbus_base; static inline u8 sis96x_read(u8 reg) { @@ -257,7 +258,6 @@ static struct i2c_adapter sis96x_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static struct pci_device_id sis96x_ids[] = { @@ -294,7 +294,8 @@ static int __devinit sis96x_probe(struct pci_dev *dev, sis96x_smbus_base); /* Everything is happy, let's grab the memory and set things up. */ - if (!request_region(sis96x_smbus_base, SMB_IOSIZE, "sis96x-smbus")) { + if (!request_region(sis96x_smbus_base, SMB_IOSIZE, + sis96x_driver.name)) { dev_err(&dev->dev, "SMBus registers 0x%04x-0x%04x " "already in use!\n", sis96x_smbus_base, sis96x_smbus_base + SMB_IOSIZE - 1); @@ -328,6 +329,7 @@ static void __devexit sis96x_remove(struct pci_dev *dev) } static struct pci_driver sis96x_driver = { + .owner = THIS_MODULE, .name = "sis96x_smbus", .id_table = sis96x_ids, .probe = sis96x_probe, diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index 040b8abeabba..544a38e64394 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -43,9 +43,9 @@ /* io-region reservation */ #define IOSPACE 0x06 -#define IOTEXT "via-i2c" -static u16 pm_io_base = 0; +static struct pci_driver vt586b_driver; +static u16 pm_io_base; /* It does not appear from the datasheet that the GPIO pins are @@ -130,7 +130,7 @@ static int __devinit vt586b_probe(struct pci_dev *dev, const struct pci_device_i pci_read_config_word(dev, base, &pm_io_base); pm_io_base &= (0xff << 8); - if (!request_region(I2C_DIR, IOSPACE, IOTEXT)) { + if (!request_region(I2C_DIR, IOSPACE, vt586b_driver.name)) { dev_err(&dev->dev, "IO 0x%x-0x%x already in use\n", I2C_DIR, I2C_DIR + IOSPACE); return -ENODEV; } @@ -159,6 +159,7 @@ static void __devexit vt586b_remove(struct pci_dev *dev) static struct pci_driver vt586b_driver = { + .owner = THIS_MODULE, .name = "vt586b_smbus", .id_table = vt586b_ids, .probe = vt586b_probe, diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 99d209e0485a..c9366b504833 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -1,9 +1,10 @@ /* i2c-viapro.c - Part of lm_sensors, Linux kernel modules for hardware monitoring - Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>, + Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>, Kyösti Mälkki <kmalkki@cc.hut.fi>, Mark D. Studebaker <mdsxyz123@yahoo.com> + Copyright (C) 2005 Jean Delvare <khali@linux-fr.org> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -21,15 +22,19 @@ */ /* - Supports Via devices: - 82C596A/B (0x3050) - 82C596B (0x3051) - 82C686A/B - 8231 - 8233 - 8233A (0x3147 and 0x3177) - 8235 - 8237 + Supports the following VIA south bridges: + + Chip name PCI ID REV I2C block + VT82C596A 0x3050 no + VT82C596B 0x3051 no + VT82C686A 0x3057 0x30 no + VT82C686B 0x3057 0x40 yes + VT8231 0x8235 no? + VT8233 0x3074 yes + VT8233A 0x3147 yes? + VT8235 0x3177 yes + VT8237R 0x3227 yes + Note: we assume there can only be one device, with one SMBus interface. */ @@ -38,7 +43,6 @@ #include <linux/pci.h> #include <linux/kernel.h> #include <linux/stddef.h> -#include <linux/sched.h> #include <linux/ioport.h> #include <linux/i2c.h> #include <linux/init.h> @@ -46,48 +50,37 @@ static struct pci_dev *vt596_pdev; -#define SMBBA1 0x90 -#define SMBBA2 0x80 -#define SMBBA3 0xD0 +#define SMBBA1 0x90 +#define SMBBA2 0x80 +#define SMBBA3 0xD0 /* SMBus address offsets */ static unsigned short vt596_smba; #define SMBHSTSTS (vt596_smba + 0) -#define SMBHSLVSTS (vt596_smba + 1) #define SMBHSTCNT (vt596_smba + 2) #define SMBHSTCMD (vt596_smba + 3) #define SMBHSTADD (vt596_smba + 4) #define SMBHSTDAT0 (vt596_smba + 5) #define SMBHSTDAT1 (vt596_smba + 6) #define SMBBLKDAT (vt596_smba + 7) -#define SMBSLVCNT (vt596_smba + 8) -#define SMBSHDWCMD (vt596_smba + 9) -#define SMBSLVEVT (vt596_smba + 0xA) -#define SMBSLVDAT (vt596_smba + 0xC) /* PCI Address Constants */ /* SMBus data in configuration space can be found in two places, - We try to select the better one*/ - -static unsigned short smb_cf_hstcfg = 0xD2; + We try to select the better one */ -#define SMBHSTCFG (smb_cf_hstcfg) -#define SMBSLVC (smb_cf_hstcfg + 1) -#define SMBSHDW1 (smb_cf_hstcfg + 2) -#define SMBSHDW2 (smb_cf_hstcfg + 3) -#define SMBREV (smb_cf_hstcfg + 4) +static unsigned short SMBHSTCFG = 0xD2; /* Other settings */ #define MAX_TIMEOUT 500 -#define ENABLE_INT9 0 /* VT82C596 constants */ -#define VT596_QUICK 0x00 -#define VT596_BYTE 0x04 -#define VT596_BYTE_DATA 0x08 -#define VT596_WORD_DATA 0x0C -#define VT596_BLOCK_DATA 0x14 +#define VT596_QUICK 0x00 +#define VT596_BYTE 0x04 +#define VT596_BYTE_DATA 0x08 +#define VT596_WORD_DATA 0x0C +#define VT596_BLOCK_DATA 0x14 +#define VT596_I2C_BLOCK_DATA 0x34 /* If force is set to anything different from 0, we forcibly enable the @@ -105,40 +98,65 @@ MODULE_PARM_DESC(force_addr, "EXTREMELY DANGEROUS!"); +static struct pci_driver vt596_driver; static struct i2c_adapter vt596_adapter; -/* Another internally used function */ -static int vt596_transaction(void) +#define FEATURE_I2CBLOCK (1<<0) +static unsigned int vt596_features; + +#ifdef DEBUG +static void vt596_dump_regs(const char *msg, u8 size) +{ + dev_dbg(&vt596_adapter.dev, "%s: STS=%02x CNT=%02x CMD=%02x ADD=%02x " + "DAT=%02x,%02x\n", msg, inb_p(SMBHSTSTS), inb_p(SMBHSTCNT), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + inb_p(SMBHSTDAT1)); + + if (size == VT596_BLOCK_DATA + || size == VT596_I2C_BLOCK_DATA) { + int i; + + dev_dbg(&vt596_adapter.dev, "BLK="); + for (i = 0; i < I2C_SMBUS_BLOCK_MAX / 2; i++) + printk("%02x,", inb_p(SMBBLKDAT)); + printk("\n"); + dev_dbg(&vt596_adapter.dev, " "); + for (; i < I2C_SMBUS_BLOCK_MAX - 1; i++) + printk("%02x,", inb_p(SMBBLKDAT)); + printk("%02x\n", inb_p(SMBBLKDAT)); + } +} +#else +static inline void vt596_dump_regs(const char *msg, u8 size) { } +#endif + +/* Return -1 on error, 0 on success */ +static int vt596_transaction(u8 size) { int temp; int result = 0; int timeout = 0; - dev_dbg(&vt596_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, " - "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), - inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), - inb_p(SMBHSTDAT1)); + vt596_dump_regs("Transaction (pre)", size); /* Make sure the SMBus host is ready to start transmitting */ if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). " - "Resetting...\n", temp); - + "Resetting... ", temp); + outb_p(temp, SMBHSTSTS); if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { - dev_dbg(&vt596_adapter.dev, "Failed! (0x%02x)\n", temp); - + printk("Failed! (0x%02x)\n", temp); return -1; } else { - dev_dbg(&vt596_adapter.dev, "Successfull!\n"); + printk("Successful!\n"); } } - /* start the transaction by setting bit 6 */ - outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT); + /* Start the transaction by setting bit 6 */ + outb_p(0x40 | (size & 0x3C), SMBHSTCNT); - /* We will always wait for a fraction of a second! - I don't know if VIA needs this, Intel did */ + /* We will always wait for a fraction of a second */ do { msleep(1); temp = inb_p(SMBHSTSTS); @@ -147,77 +165,61 @@ static int vt596_transaction(void) /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { result = -1; - dev_dbg(&vt596_adapter.dev, "SMBus Timeout!\n"); + dev_err(&vt596_adapter.dev, "SMBus timeout!\n"); } if (temp & 0x10) { result = -1; - dev_dbg(&vt596_adapter.dev, "Error: Failed bus transaction\n"); + dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n", + inb_p(SMBHSTCNT) & 0x3C); } if (temp & 0x08) { result = -1; - dev_info(&vt596_adapter.dev, "Bus collision! SMBus may be " - "locked until next hard\nreset. (sorry!)\n"); - /* Clock stops and slave is stuck in mid-transmission */ + dev_err(&vt596_adapter.dev, "SMBus collision!\n"); } if (temp & 0x04) { result = -1; - dev_dbg(&vt596_adapter.dev, "Error: no response!\n"); + /* Quick commands are used to probe for chips, so + errors are expected, and we don't want to frighten the + user. */ + if ((inb_p(SMBHSTCNT) & 0x3C) != VT596_QUICK) + dev_err(&vt596_adapter.dev, "Transaction error!\n"); } - if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { + /* Resetting status register */ + if (temp & 0x1F) outb_p(temp, SMBHSTSTS); - if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { - dev_warn(&vt596_adapter.dev, "Failed reset at end " - "of transaction (%02x)\n", temp); - } - } - dev_dbg(&vt596_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, " - "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), - inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), - inb_p(SMBHSTDAT1)); - + vt596_dump_regs("Transaction (post)", size); + return result; } -/* Return -1 on error. */ +/* Return -1 on error, 0 on success */ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, - unsigned short flags, char read_write, u8 command, - int size, union i2c_smbus_data *data) + unsigned short flags, char read_write, u8 command, + int size, union i2c_smbus_data *data) { - int i, len; + int i; switch (size) { - case I2C_SMBUS_PROC_CALL: - dev_info(&vt596_adapter.dev, - "I2C_SMBUS_PROC_CALL not supported!\n"); - return -1; case I2C_SMBUS_QUICK: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); size = VT596_QUICK; break; case I2C_SMBUS_BYTE: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); if (read_write == I2C_SMBUS_WRITE) outb_p(command, SMBHSTCMD); size = VT596_BYTE; break; case I2C_SMBUS_BYTE_DATA: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) outb_p(data->byte, SMBHSTDAT0); size = VT596_BYTE_DATA; break; case I2C_SMBUS_WORD_DATA: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) { outb_p(data->word & 0xff, SMBHSTDAT0); @@ -225,28 +227,33 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, } size = VT596_WORD_DATA; break; + case I2C_SMBUS_I2C_BLOCK_DATA: + if (!(vt596_features & FEATURE_I2CBLOCK)) + goto exit_unsupported; + if (read_write == I2C_SMBUS_READ) + outb_p(I2C_SMBUS_BLOCK_MAX, SMBHSTDAT0); + /* Fall through */ case I2C_SMBUS_BLOCK_DATA: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) { - len = data->block[0]; - if (len < 0) - len = 0; + u8 len = data->block[0]; if (len > I2C_SMBUS_BLOCK_MAX) len = I2C_SMBUS_BLOCK_MAX; outb_p(len, SMBHSTDAT0); - i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ + inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ for (i = 1; i <= len; i++) outb_p(data->block[i], SMBBLKDAT); } - size = VT596_BLOCK_DATA; + size = (size == I2C_SMBUS_I2C_BLOCK_DATA) ? + VT596_I2C_BLOCK_DATA : VT596_BLOCK_DATA; break; + default: + goto exit_unsupported; } - outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT); + outb_p(((addr & 0x7f) << 1) | read_write, SMBHSTADD); - if (vt596_transaction()) /* Error in transaction */ + if (vt596_transaction(size)) /* Error in transaction */ return -1; if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK)) @@ -254,35 +261,39 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, switch (size) { case VT596_BYTE: - /* Where is the result put? I assume here it is in - * SMBHSTDAT0 but it might just as well be in the - * SMBHSTCMD. No clue in the docs - */ - data->byte = inb_p(SMBHSTDAT0); - break; case VT596_BYTE_DATA: data->byte = inb_p(SMBHSTDAT0); break; case VT596_WORD_DATA: data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8); break; + case VT596_I2C_BLOCK_DATA: case VT596_BLOCK_DATA: data->block[0] = inb_p(SMBHSTDAT0); if (data->block[0] > I2C_SMBUS_BLOCK_MAX) data->block[0] = I2C_SMBUS_BLOCK_MAX; - i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ + inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ for (i = 1; i <= data->block[0]; i++) data->block[i] = inb_p(SMBBLKDAT); break; } return 0; + +exit_unsupported: + dev_warn(&vt596_adapter.dev, "Unsupported command invoked! (0x%02x)\n", + size); + return -1; } static u32 vt596_func(struct i2c_adapter *adapter) { - return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + u32 func = I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA; + + if (vt596_features & FEATURE_I2CBLOCK) + func |= I2C_FUNC_SMBUS_I2C_BLOCK; + return func; } static struct i2c_algorithm smbus_algorithm = { @@ -294,7 +305,6 @@ static struct i2c_adapter vt596_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static int __devinit vt596_probe(struct pci_dev *pdev, @@ -302,7 +312,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev, { unsigned char temp; int error = -ENODEV; - + /* Determine the address of the SMBus areas */ if (force_addr) { vt596_smba = force_addr & 0xfff0; @@ -311,12 +321,12 @@ static int __devinit vt596_probe(struct pci_dev *pdev, } if ((pci_read_config_word(pdev, id->driver_data, &vt596_smba)) || - !(vt596_smba & 0x1)) { + !(vt596_smba & 0x0001)) { /* try 2nd address and config reg. for 596 */ if (id->device == PCI_DEVICE_ID_VIA_82C596_3 && !pci_read_config_word(pdev, SMBBA2, &vt596_smba) && - (vt596_smba & 0x1)) { - smb_cf_hstcfg = 0x84; + (vt596_smba & 0x0001)) { + SMBHSTCFG = 0x84; } else { /* no matches at all */ dev_err(&pdev->dev, "Cannot configure " @@ -333,10 +343,10 @@ static int __devinit vt596_probe(struct pci_dev *pdev, return -ENODEV; } - found: - if (!request_region(vt596_smba, 8, "viapro-smbus")) { +found: + if (!request_region(vt596_smba, 8, vt596_driver.name)) { dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n", - vt596_smba); + vt596_smba); return -ENODEV; } @@ -348,16 +358,16 @@ static int __devinit vt596_probe(struct pci_dev *pdev, pci_write_config_word(pdev, id->driver_data, vt596_smba); pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01); dev_warn(&pdev->dev, "WARNING: SMBus interface set to new " - "address 0x%04x!\n", vt596_smba); - } else if ((temp & 1) == 0) { + "address 0x%04x!\n", vt596_smba); + } else if (!(temp & 0x01)) { if (force) { - /* NOTE: This assumes I/O space and other allocations - * WERE done by the Bios! Don't complain if your - * hardware does weird things after enabling this. - * :') Check for Bios updates before resorting to + /* NOTE: This assumes I/O space and other allocations + * WERE done by the Bios! Don't complain if your + * hardware does weird things after enabling this. + * :') Check for Bios updates before resorting to * this. */ - pci_write_config_byte(pdev, SMBHSTCFG, temp | 1); + pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01); dev_info(&pdev->dev, "Enabling SMBus device\n"); } else { dev_err(&pdev->dev, "SMBUS: Error: Host SMBus " @@ -367,22 +377,28 @@ static int __devinit vt596_probe(struct pci_dev *pdev, } } - if ((temp & 0x0E) == 8) - dev_dbg(&pdev->dev, "using Interrupt 9 for SMBus.\n"); - else if ((temp & 0x0E) == 0) - dev_dbg(&pdev->dev, "using Interrupt SMI# for SMBus.\n"); - else - dev_dbg(&pdev->dev, "Illegal Interrupt configuration " - "(or code out of date)!\n"); - - pci_read_config_byte(pdev, SMBREV, &temp); - dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp); dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba); + switch (pdev->device) { + case PCI_DEVICE_ID_VIA_8237: + case PCI_DEVICE_ID_VIA_8235: + case PCI_DEVICE_ID_VIA_8233A: + case PCI_DEVICE_ID_VIA_8233_0: + vt596_features |= FEATURE_I2CBLOCK; + break; + case PCI_DEVICE_ID_VIA_82C686_4: + /* The VT82C686B (rev 0x40) does support I2C block + transactions, but the VT82C686A (rev 0x30) doesn't */ + if (!pci_read_config_byte(pdev, PCI_REVISION_ID, &temp) + && temp >= 0x40) + vt596_features |= FEATURE_I2CBLOCK; + break; + } + vt596_adapter.dev.parent = &pdev->dev; snprintf(vt596_adapter.name, I2C_NAME_SIZE, - "SMBus Via Pro adapter at %04x", vt596_smba); - + "SMBus Via Pro adapter at %04x", vt596_smba); + vt596_pdev = pci_dev_get(pdev); if (i2c_add_adapter(&vt596_adapter)) { pci_dev_put(vt596_pdev); @@ -395,7 +411,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev, */ return -ENODEV; - release_region: +release_region: release_region(vt596_smba, 8); return error; } @@ -420,9 +436,10 @@ static struct pci_device_id vt596_ids[] = { { 0, } }; -MODULE_DEVICE_TABLE (pci, vt596_ids); +MODULE_DEVICE_TABLE(pci, vt596_ids); static struct pci_driver vt596_driver = { + .owner = THIS_MODULE, .name = "vt596_smbus", .id_table = vt596_ids, .probe = vt596_probe, diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c index b675773b0cc1..650c3ebde84c 100644 --- a/drivers/i2c/busses/i2c-voodoo3.c +++ b/drivers/i2c/busses/i2c-voodoo3.c @@ -225,6 +225,7 @@ static void __devexit voodoo3_remove(struct pci_dev *dev) } static struct pci_driver voodoo3_driver = { + .owner = THIS_MODULE, .name = "voodoo3_smbus", .id_table = voodoo3_ids, .probe = voodoo3_probe, diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index a1d580e05361..d3478e084522 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -442,14 +442,13 @@ static int __init scx200_acb_create(int base, int index) int rc = 0; char description[64]; - iface = kmalloc(sizeof(*iface), GFP_KERNEL); + iface = kzalloc(sizeof(*iface), GFP_KERNEL); if (!iface) { printk(KERN_ERR NAME ": can't allocate memory\n"); rc = -ENOMEM; goto errout; } - memset(iface, 0, sizeof(*iface)); adapter = &iface->adapter; i2c_set_adapdata(adapter, iface); snprintf(adapter->name, I2C_NAME_SIZE, "SCx200 ACB%d", index); |
