diff options
Diffstat (limited to 'arch')
354 files changed, 4106 insertions, 6716 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f0501635b88d..0e8db19899c4 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -327,7 +327,7 @@ config ARCH_AT91 select CLKDEV_LOOKUP help This enables support for systems based on the Atmel AT91RM9200, - AT91SAM9 and AT91CAP9 processors. + AT91SAM9 processors. config ARCH_BCMRING bool "Broadcom BCMRING" @@ -769,22 +769,21 @@ config ARCH_SA1100 help Support for StrongARM 11x0 based boards. -config ARCH_S3C2410 - bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450" +config ARCH_S3C24XX + bool "Samsung S3C24XX SoCs" select GENERIC_GPIO select ARCH_HAS_CPUFREQ select HAVE_CLK select CLKDEV_LOOKUP select ARCH_USES_GETTIMEOFFSET select HAVE_S3C2410_I2C if I2C + select HAVE_S3C_RTC if RTC_CLASS + select HAVE_S3C2410_WATCHDOG if WATCHDOG help - Samsung S3C2410X CPU based systems, such as the Simtec Electronics - BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or - the Samsung SMDK2410 development board (and derivatives). - - Note, the S3C2416 and the S3C2450 are so close that they even share - the same SoC ID code. This means that there is no separate machine - directory (no arch/arm/mach-s3c2450) as the S3C2416 was first. + Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 + and S3C2450 SoCs based systems, such as the Simtec Electronics BAST + (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the + Samsung SMDK2410 development board (and derivatives). config ARCH_S3C64XX bool "Samsung S3C64XX" @@ -1073,12 +1072,10 @@ source "arch/arm/plat-s5p/Kconfig" source "arch/arm/plat-spear/Kconfig" -if ARCH_S3C2410 -source "arch/arm/mach-s3c2410/Kconfig" +source "arch/arm/mach-s3c24xx/Kconfig" +if ARCH_S3C24XX source "arch/arm/mach-s3c2412/Kconfig" -source "arch/arm/mach-s3c2416/Kconfig" source "arch/arm/mach-s3c2440/Kconfig" -source "arch/arm/mach-s3c2443/Kconfig" endif if ARCH_S3C64XX @@ -1595,7 +1592,7 @@ source kernel/Kconfig.preempt config HZ int - default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \ + default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \ ARCH_S5PV210 || ARCH_EXYNOS4 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 @@ -2121,7 +2118,7 @@ config CPU_FREQ_S3C config CPU_FREQ_S3C24XX bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" - depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL + depends on ARCH_S3C24XX && CPU_FREQ && EXPERIMENTAL select CPU_FREQ_S3C help This enables the CPUfreq driver for the Samsung S3C24XX family diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 03646c4c13d1..b895a2a92da8 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -86,7 +86,7 @@ choice depends on HAVE_AT91_DBGU0 config AT91_DEBUG_LL_DBGU1 - bool "Kernel low-level debugging on 9263, 9g45 and cap9" + bool "Kernel low-level debugging on 9263 and 9g45" depends on HAVE_AT91_DBGU1 config DEBUG_CLPS711X_UART1 diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 1683bfb9166f..0106f75530c0 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -174,7 +174,7 @@ machine-$(CONFIG_ARCH_PRIMA2) := prima2 machine-$(CONFIG_ARCH_PXA) := pxa machine-$(CONFIG_ARCH_REALVIEW) := realview machine-$(CONFIG_ARCH_RPC) := rpc -machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2412 s3c2416 s3c2440 s3c2443 +machine-$(CONFIG_ARCH_S3C24XX) := s3c24xx s3c2412 s3c2440 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index c5d60250d43d..5f6045f1766c 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -58,7 +58,7 @@ add \rb, \rb, #0x00010000 @ Ser1 #endif .endm -#elif defined(CONFIG_ARCH_S3C2410) +#elif defined(CONFIG_ARCH_S3C24XX) .macro loadsp, rb, tmp mov \rb, #0x50000000 add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT diff --git a/arch/arm/configs/at91cap9_defconfig b/arch/arm/configs/at91cap9_defconfig deleted file mode 100644 index 8826eb218e73..000000000000 --- a/arch/arm/configs/at91cap9_defconfig +++ /dev/null @@ -1,108 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91CAP9=y -CONFIG_MACH_AT91CAP9ADK=y -CONFIG_MTD_AT91_DATAFLASH_CARD=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_FB=y -CONFIG_FB_ATMEL=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 2472a9585834..42da9183acc8 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -13,7 +13,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_BLK_DEV_INTEGRITY=y -CONFIG_ARCH_S3C2410=y +CONFIG_ARCH_S3C24XX=y CONFIG_S3C_ADC=y CONFIG_S3C24XX_PWM=y CONFIG_MACH_MINI2440=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index f9096c1b0a65..193448f31284 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -3,40 +3,47 @@ CONFIG_SYSVIPC=y CONFIG_IKCONFIG=m CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S3C2410=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_ARCH_S3C24XX=y CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_S3C_ADC=y CONFIG_S3C24XX_PWM=y -CONFIG_ARCH_SMDK2410=y +CONFIG_CPU_S3C2412=y +CONFIG_CPU_S3C2416=y +CONFIG_CPU_S3C2440=y +CONFIG_CPU_S3C2442=y +CONFIG_CPU_S3C2443=y +CONFIG_MACH_AML_M5900=y +CONFIG_ARCH_BAST=y CONFIG_ARCH_H1940=y CONFIG_MACH_N30=y -CONFIG_ARCH_BAST=y CONFIG_MACH_OTOM=y -CONFIG_MACH_AML_M5900=y +CONFIG_MACH_QT2410=y +CONFIG_ARCH_SMDK2410=y CONFIG_MACH_TCT_HAMMER=y CONFIG_MACH_VR1000=y -CONFIG_MACH_QT2410=y CONFIG_MACH_JIVE=y CONFIG_MACH_SMDK2412=y CONFIG_MACH_VSTMS=y CONFIG_MACH_SMDK2416=y CONFIG_MACH_ANUBIS=y -CONFIG_MACH_NEO1973_GTA02=y +CONFIG_MACH_AT2440EVB=y +CONFIG_MACH_MINI2440=y +CONFIG_MACH_NEXCODER_2440=y CONFIG_MACH_OSIRIS=y CONFIG_MACH_OSIRIS_DVS=m CONFIG_MACH_RX3715=y CONFIG_ARCH_S3C2440=y -CONFIG_MACH_NEXCODER_2440=y -CONFIG_SMDK2440_CPU2442=y -CONFIG_MACH_AT2440EVB=y -CONFIG_MACH_MINI2440=y +CONFIG_MACH_NEO1973_GTA02=y CONFIG_MACH_RX1950=y +CONFIG_SMDK2440_CPU2442=y CONFIG_MACH_SMDK2443=y # CONFIG_ARM_THUMB is not set CONFIG_ZBOOT_ROM_TEXT=0x0 @@ -45,7 +52,6 @@ CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0" CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y CONFIG_BINFMT_AOUT=y -CONFIG_PM=y CONFIG_APM_EMULATION=m CONFIG_NET=y CONFIG_PACKET=y @@ -58,7 +64,6 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m @@ -80,7 +85,6 @@ CONFIG_IPV6_MIP6=m CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_EVENTS=y CONFIG_NF_CT_PROTO_DCCP=m @@ -138,7 +142,6 @@ CONFIG_IP_VS=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m @@ -150,7 +153,6 @@ CONFIG_NF_NAT=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -177,8 +179,6 @@ CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m @@ -199,7 +199,6 @@ CONFIG_MAC80211_MESH=y CONFIG_MAC80211_LEDS=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y CONFIG_MTD_CMDLINE_PARTS=y @@ -221,9 +220,6 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_UB=m CONFIG_BLK_DEV_RAM=y CONFIG_ATA_OVER_ETH=m -CONFIG_EEPROM_AT25=m -CONFIG_EEPROM_LEGACY=m -CONFIG_EEPROM_93CX6=m CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDETAPE=m @@ -240,7 +236,6 @@ CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_DM9000=y CONFIG_INPUT_EVDEV=y CONFIG_MOUSE_APPLETOUCH=m @@ -274,7 +269,6 @@ CONFIG_JOYSTICK_XPAD_LEDS=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_USB_COMPOSITE=m CONFIG_INPUT_MISC=y -CONFIG_INPUT_ATI_REMOTE=m CONFIG_INPUT_ATI_REMOTE2=m CONFIG_INPUT_KEYSPAN_REMOTE=m CONFIG_INPUT_POWERMATE=m @@ -300,7 +294,6 @@ CONFIG_I2C_SIMTEC=y CONFIG_SPI=y CONFIG_SPI_GPIO=m CONFIG_SPI_S3C24XX=m -CONFIG_SPI_S3C24XX_GPIO=m CONFIG_SPI_SPIDEV=m CONFIG_SPI_TLE62X0=m CONFIG_SENSORS_LM75=m @@ -315,7 +308,6 @@ CONFIG_FB_MODE_HELPERS=y CONFIG_FB_S3C2410=y CONFIG_FB_SM501=y CONFIG_BACKLIGHT_PWM=m -# CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_SOUND=y CONFIG_SND=y @@ -330,10 +322,6 @@ CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_USB_AUDIO=m CONFIG_SND_USB_CAIAQ=m CONFIG_SND_SOC=y -CONFIG_SND_S3C24XX_SOC=y -CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m -CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m -CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m # CONFIG_USB_HID is not set CONFIG_USB=y CONFIG_USB_DEVICEFS=y @@ -387,9 +375,7 @@ CONFIG_MMC_TEST=m CONFIG_MMC_SDHCI=m CONFIG_MMC_SPI=m CONFIG_MMC_S3C=y -CONFIG_LEDS_CLASS=m CONFIG_LEDS_S3C24XX=m -CONFIG_LEDS_H1940=m CONFIG_LEDS_PCA9532=m CONFIG_LEDS_GPIO=m CONFIG_LEDS_PCA955X=m @@ -410,8 +396,6 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT4_FS=m CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_INOTIFY=y -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m CONFIG_ISO9660_FS=y @@ -436,9 +420,6 @@ CONFIG_NFSD=m CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_CIFS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y -CONFIG_SOLARIS_X86_PARTITION=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m @@ -481,9 +462,7 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 95c0f0d63db6..1d24f8458bef 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -14,7 +14,7 @@ CONFIG_SLOB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S3C2410=y +CONFIG_ARCH_S3C24XX=y CONFIG_MACH_TCT_HAMMER=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 43b740d0e374..f16d7652f34b 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -62,9 +62,6 @@ obj-$(CONFIG_SWP_EMULATE) += swp_emulate.o CFLAGS_swp_emulate.o := -Wa,-march=armv7-a obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o -obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o -AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 - obj-$(CONFIG_CPU_XSCALE) += xscale-cp0.o obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o obj-$(CONFIG_CPU_MOHAWK) += xscale-cp0.o diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 71feb00a1e99..0284e66c47f9 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -102,15 +102,6 @@ config ARCH_AT91SAM9G45 select HAVE_AT91_DBGU1 select AT91_SAM9G45_RESET -config ARCH_AT91CAP9 - bool "AT91CAP9" - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - select HAVE_FB_ATMEL - select HAVE_NET_MACB - select HAVE_AT91_DBGU1 - select AT91_SAM9G45_RESET - config ARCH_AT91X40 bool "AT91x40" select ARCH_USES_GETTIMEOFFSET @@ -447,21 +438,6 @@ endif # ---------------------------------------------------------- -if ARCH_AT91CAP9 - -comment "AT91CAP9 Board Type" - -config MACH_AT91CAP9ADK - bool "Atmel AT91CAP9A-DK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138> - -endif - -# ---------------------------------------------------------- - if ARCH_AT91X40 comment "AT91X40 Board Type" @@ -544,7 +520,7 @@ config AT91_EARLY_DBGU0 depends on HAVE_AT91_DBGU0 config AT91_EARLY_DBGU1 - bool "DBGU on 9263, 9g45 and cap9" + bool "DBGU on 9263 and 9g45" depends on HAVE_AT91_DBGU1 config AT91_EARLY_USART0 diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 705e1fbded39..aeb76f1690d9 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -20,7 +20,6 @@ obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_d obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o -obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support @@ -81,9 +80,6 @@ obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91SAM board with device-tree obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o -# AT91CAP9 board-specific support -obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o - # AT91X40 board-specific support obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot index 8ddafadfdc7d..2fd051eb2449 100644 --- a/arch/arm/mach-at91/Makefile.boot +++ b/arch/arm/mach-at91/Makefile.boot @@ -3,11 +3,7 @@ # PARAMS_PHYS must be within 4MB of ZRELADDR # INITRD_PHYS must be in RAM -ifeq ($(CONFIG_ARCH_AT91CAP9),y) - zreladdr-y += 0x70008000 -params_phys-y := 0x70000100 -initrd_phys-y := 0x70410000 -else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y) +ifeq ($(CONFIG_ARCH_AT91SAM9G45),y) zreladdr-y += 0x70008000 params_phys-y := 0x70000100 initrd_phys-y := 0x70410000 diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c deleted file mode 100644 index 8967d75c2ea3..000000000000 --- a/arch/arm/mach-at91/at91cap9.c +++ /dev/null @@ -1,404 +0,0 @@ -/* - * arch/arm/mach-at91/at91cap9.c - * - * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2007 Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#include <linux/module.h> - -#include <asm/proc-fns.h> -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/cpu.h> -#include <mach/at91cap9.h> -#include <mach/at91_pmc.h> - -#include "soc.h" -#include "generic.h" -#include "clock.h" -#include "sam9_smc.h" - -/* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ - -/* - * The peripheral clocks. - */ -static struct clk pioABCD_clk = { - .name = "pioABCD_clk", - .pmc_mask = 1 << AT91CAP9_ID_PIOABCD, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mpb0_clk = { - .name = "mpb0_clk", - .pmc_mask = 1 << AT91CAP9_ID_MPB0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mpb1_clk = { - .name = "mpb1_clk", - .pmc_mask = 1 << AT91CAP9_ID_MPB1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mpb2_clk = { - .name = "mpb2_clk", - .pmc_mask = 1 << AT91CAP9_ID_MPB2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mpb3_clk = { - .name = "mpb3_clk", - .pmc_mask = 1 << AT91CAP9_ID_MPB3, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mpb4_clk = { - .name = "mpb4_clk", - .pmc_mask = 1 << AT91CAP9_ID_MPB4, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .pmc_mask = 1 << AT91CAP9_ID_US0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pmc_mask = 1 << AT91CAP9_ID_US1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pmc_mask = 1 << AT91CAP9_ID_US2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc0_clk = { - .name = "mci0_clk", - .pmc_mask = 1 << AT91CAP9_ID_MCI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc1_clk = { - .name = "mci1_clk", - .pmc_mask = 1 << AT91CAP9_ID_MCI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk can_clk = { - .name = "can_clk", - .pmc_mask = 1 << AT91CAP9_ID_CAN, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi_clk = { - .name = "twi_clk", - .pmc_mask = 1 << AT91CAP9_ID_TWI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi0_clk = { - .name = "spi0_clk", - .pmc_mask = 1 << AT91CAP9_ID_SPI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi1_clk = { - .name = "spi1_clk", - .pmc_mask = 1 << AT91CAP9_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc0_clk = { - .name = "ssc0_clk", - .pmc_mask = 1 << AT91CAP9_ID_SSC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc1_clk = { - .name = "ssc1_clk", - .pmc_mask = 1 << AT91CAP9_ID_SSC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ac97_clk = { - .name = "ac97_clk", - .pmc_mask = 1 << AT91CAP9_ID_AC97C, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tcb_clk = { - .name = "tcb_clk", - .pmc_mask = 1 << AT91CAP9_ID_TCB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pwm_clk = { - .name = "pwm_clk", - .pmc_mask = 1 << AT91CAP9_ID_PWMC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk macb_clk = { - .name = "pclk", - .pmc_mask = 1 << AT91CAP9_ID_EMAC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk aestdes_clk = { - .name = "aestdes_clk", - .pmc_mask = 1 << AT91CAP9_ID_AESTDES, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk adc_clk = { - .name = "adc_clk", - .pmc_mask = 1 << AT91CAP9_ID_ADC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk isi_clk = { - .name = "isi_clk", - .pmc_mask = 1 << AT91CAP9_ID_ISI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk lcdc_clk = { - .name = "lcdc_clk", - .pmc_mask = 1 << AT91CAP9_ID_LCDC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk dma_clk = { - .name = "dma_clk", - .pmc_mask = 1 << AT91CAP9_ID_DMA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk udphs_clk = { - .name = "udphs_clk", - .pmc_mask = 1 << AT91CAP9_ID_UDPHS, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 1 << AT91CAP9_ID_UHP, - .type = CLK_TYPE_PERIPHERAL, -}; - -static struct clk *periph_clocks[] __initdata = { - &pioABCD_clk, - &mpb0_clk, - &mpb1_clk, - &mpb2_clk, - &mpb3_clk, - &mpb4_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &mmc0_clk, - &mmc1_clk, - &can_clk, - &twi_clk, - &spi0_clk, - &spi1_clk, - &ssc0_clk, - &ssc1_clk, - &ac97_clk, - &tcb_clk, - &pwm_clk, - &macb_clk, - &aestdes_clk, - &adc_clk, - &isi_clk, - &lcdc_clk, - &dma_clk, - &udphs_clk, - &ohci_clk, - // irq0 .. irq1 -}; - -static struct clk_lookup periph_clocks_lookups[] = { - /* One additional fake clock for macb_hclk */ - CLKDEV_CON_ID("hclk", &macb_clk), - CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), - CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), - CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), - CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), - /* fake hclk clock */ - CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), - CLKDEV_CON_ID("pioA", &pioABCD_clk), - CLKDEV_CON_ID("pioB", &pioABCD_clk), - CLKDEV_CON_ID("pioC", &pioABCD_clk), - CLKDEV_CON_ID("pioD", &pioABCD_clk), -}; - -static struct clk_lookup usart_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), -}; - -/* - * The four programmable clocks. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; -static struct clk pck2 = { - .name = "pck2", - .pmc_mask = AT91_PMC_PCK2, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 2, -}; -static struct clk pck3 = { - .name = "pck3", - .pmc_mask = AT91_PMC_PCK3, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 3, -}; - -static void __init at91cap9_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - - clkdev_add_table(periph_clocks_lookups, - ARRAY_SIZE(periph_clocks_lookups)); - clkdev_add_table(usart_clocks_lookups, - ARRAY_SIZE(usart_clocks_lookups)); - - clk_register(&pck0); - clk_register(&pck1); - clk_register(&pck2); - clk_register(&pck3); -} - -static struct clk_lookup console_clock_lookup; - -void __init at91cap9_set_console_clock(int id) -{ - if (id >= ARRAY_SIZE(usart_clocks_lookups)) - return; - - console_clock_lookup.con_id = "usart"; - console_clock_lookup.clk = usart_clocks_lookups[id].clk; - clkdev_add(&console_clock_lookup); -} - -/* -------------------------------------------------------------------- - * GPIO - * -------------------------------------------------------------------- */ - -static struct at91_gpio_bank at91cap9_gpio[] __initdata = { - { - .id = AT91CAP9_ID_PIOABCD, - .regbase = AT91CAP9_BASE_PIOA, - }, { - .id = AT91CAP9_ID_PIOABCD, - .regbase = AT91CAP9_BASE_PIOB, - }, { - .id = AT91CAP9_ID_PIOABCD, - .regbase = AT91CAP9_BASE_PIOC, - }, { - .id = AT91CAP9_ID_PIOABCD, - .regbase = AT91CAP9_BASE_PIOD, - } -}; - -static void at91cap9_idle(void) -{ - at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); - cpu_do_idle(); -} - -/* -------------------------------------------------------------------- - * AT91CAP9 processor initialization - * -------------------------------------------------------------------- */ - -static void __init at91cap9_map_io(void) -{ - at91_init_sram(0, AT91CAP9_SRAM_BASE, AT91CAP9_SRAM_SIZE); -} - -static void __init at91cap9_ioremap_registers(void) -{ - at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC); - at91_ioremap_rstc(AT91CAP9_BASE_RSTC); - at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT); - at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC); -} - -static void __init at91cap9_initialize(void) -{ - arm_pm_idle = at91cap9_idle; - arm_pm_restart = at91sam9g45_restart; - at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); - - /* Register GPIO subsystem */ - at91_gpio_init(at91cap9_gpio, 4); - - /* Remember the silicon revision */ - if (cpu_is_at91cap9_revB()) - system_rev = 0xB; - else if (cpu_is_at91cap9_revC()) - system_rev = 0xC; -} - -/* -------------------------------------------------------------------- - * Interrupt initialization - * -------------------------------------------------------------------- */ - -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller (FIQ) */ - 7, /* System Peripherals */ - 1, /* Parallel IO Controller A, B, C and D */ - 0, /* MP Block Peripheral 0 */ - 0, /* MP Block Peripheral 1 */ - 0, /* MP Block Peripheral 2 */ - 0, /* MP Block Peripheral 3 */ - 0, /* MP Block Peripheral 4 */ - 5, /* USART 0 */ - 5, /* USART 1 */ - 5, /* USART 2 */ - 0, /* Multimedia Card Interface 0 */ - 0, /* Multimedia Card Interface 1 */ - 3, /* CAN */ - 6, /* Two-Wire Interface */ - 5, /* Serial Peripheral Interface 0 */ - 5, /* Serial Peripheral Interface 1 */ - 4, /* Serial Synchronous Controller 0 */ - 4, /* Serial Synchronous Controller 1 */ - 5, /* AC97 Controller */ - 0, /* Timer Counter 0, 1 and 2 */ - 0, /* Pulse Width Modulation Controller */ - 3, /* Ethernet */ - 0, /* Advanced Encryption Standard, Triple DES*/ - 0, /* Analog-to-Digital Converter */ - 0, /* Image Sensor Interface */ - 3, /* LCD Controller */ - 0, /* DMA Controller */ - 2, /* USB Device Port */ - 2, /* USB Host port */ - 0, /* Advanced Interrupt Controller (IRQ0) */ - 0, /* Advanced Interrupt Controller (IRQ1) */ -}; - -struct at91_init_soc __initdata at91cap9_soc = { - .map_io = at91cap9_map_io, - .default_irq_priority = at91cap9_default_irq_priority, - .ioremap_registers = at91cap9_ioremap_registers, - .register_clocks = at91cap9_register_clocks, - .init = at91cap9_initialize, -}; diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c deleted file mode 100644 index d298fb7cb210..000000000000 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ /dev/null @@ -1,1273 +0,0 @@ -/* - * arch/arm/mach-at91/at91cap9_devices.c - * - * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2007 Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <linux/dma-mapping.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/i2c-gpio.h> - -#include <video/atmel_lcdc.h> - -#include <mach/board.h> -#include <mach/cpu.h> -#include <mach/at91cap9.h> -#include <mach/at91cap9_matrix.h> -#include <mach/at91sam9_smc.h> - -#include "generic.h" - - -/* -------------------------------------------------------------------- - * USB Host - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = DMA_BIT_MASK(32); -static struct at91_usbh_data usbh_data; - -static struct resource usbh_resources[] = { - [0] = { - .start = AT91CAP9_UHP_BASE, - .end = AT91CAP9_UHP_BASE + SZ_1M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_UHP, - .end = AT91CAP9_ID_UHP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_usbh_device = { - .name = "at91_ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_data, - }, - .resource = usbh_resources, - .num_resources = ARRAY_SIZE(usbh_resources), -}; - -void __init at91_add_device_usbh(struct at91_usbh_data *data) -{ - int i; - - if (!data) - return; - - if (cpu_is_at91cap9_revB()) - irq_set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH); - - /* Enable VBus control for UHP ports */ - for (i = 0; i < data->ports; i++) { - if (gpio_is_valid(data->vbus_pin[i])) - at91_set_gpio_output(data->vbus_pin[i], 0); - } - - /* Enable overcurrent notification */ - for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) - at91_set_gpio_input(data->overcurrent_pin[i], 1); - } - - usbh_data = *data; - platform_device_register(&at91_usbh_device); -} -#else -void __init at91_add_device_usbh(struct at91_usbh_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * USB HS Device (Gadget) - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE) - -static struct resource usba_udc_resources[] = { - [0] = { - .start = AT91CAP9_UDPHS_FIFO, - .end = AT91CAP9_UDPHS_FIFO + SZ_512K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_BASE_UDPHS, - .end = AT91CAP9_BASE_UDPHS + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = AT91CAP9_ID_UDPHS, - .end = AT91CAP9_ID_UDPHS, - .flags = IORESOURCE_IRQ, - }, -}; - -#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \ - [idx] = { \ - .name = nam, \ - .index = idx, \ - .fifo_size = maxpkt, \ - .nr_banks = maxbk, \ - .can_dma = dma, \ - .can_isoc = isoc, \ - } - -static struct usba_ep_data usba_udc_ep[] = { - EP("ep0", 0, 64, 1, 0, 0), - EP("ep1", 1, 1024, 3, 1, 1), - EP("ep2", 2, 1024, 3, 1, 1), - EP("ep3", 3, 1024, 2, 1, 1), - EP("ep4", 4, 1024, 2, 1, 1), - EP("ep5", 5, 1024, 2, 1, 0), - EP("ep6", 6, 1024, 2, 1, 0), - EP("ep7", 7, 1024, 2, 0, 0), -}; - -#undef EP - -/* - * pdata doesn't have room for any endpoints, so we need to - * append room for the ones we need right after it. - */ -static struct { - struct usba_platform_data pdata; - struct usba_ep_data ep[8]; -} usba_udc_data; - -static struct platform_device at91_usba_udc_device = { - .name = "atmel_usba_udc", - .id = -1, - .dev = { - .platform_data = &usba_udc_data.pdata, - }, - .resource = usba_udc_resources, - .num_resources = ARRAY_SIZE(usba_udc_resources), -}; - -void __init at91_add_device_usba(struct usba_platform_data *data) -{ - if (cpu_is_at91cap9_revB()) { - irq_set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH); - at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS | - AT91_MATRIX_UDPHS_BYPASS_LOCK); - } - else - at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS); - - /* - * Invalid pins are 0 on AT91, but the usba driver is shared - * with AVR32, which use negative values instead. Once/if - * gpio_is_valid() is ported to AT91, revisit this code. - */ - usba_udc_data.pdata.vbus_pin = -EINVAL; - usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep); - memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep)); - - if (data && gpio_is_valid(data->vbus_pin)) { - at91_set_gpio_input(data->vbus_pin, 0); - at91_set_deglitch(data->vbus_pin, 1); - usba_udc_data.pdata.vbus_pin = data->vbus_pin; - } - - /* Pullup pin is handled internally by USB device peripheral */ - - platform_device_register(&at91_usba_udc_device); -} -#else -void __init at91_add_device_usba(struct usba_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Ethernet - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -static u64 eth_dmamask = DMA_BIT_MASK(32); -static struct macb_platform_data eth_data; - -static struct resource eth_resources[] = { - [0] = { - .start = AT91CAP9_BASE_EMAC, - .end = AT91CAP9_BASE_EMAC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_EMAC, - .end = AT91CAP9_ID_EMAC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_eth_device = { - .name = "macb", - .id = -1, - .dev = { - .dma_mask = ð_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = ð_data, - }, - .resource = eth_resources, - .num_resources = ARRAY_SIZE(eth_resources), -}; - -void __init at91_add_device_eth(struct macb_platform_data *data) -{ - if (!data) - return; - - if (gpio_is_valid(data->phy_irq_pin)) { - at91_set_gpio_input(data->phy_irq_pin, 0); - at91_set_deglitch(data->phy_irq_pin, 1); - } - - /* Pins used for MII and RMII */ - at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */ - at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */ - at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */ - at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */ - at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */ - at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */ - at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */ - at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */ - at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */ - at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */ - - if (!data->is_rmii) { - at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */ - at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */ - at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */ - at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */ - at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */ - at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */ - at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */ - at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */ - } - - eth_data = *data; - platform_device_register(&at91cap9_eth_device); -} -#else -void __init at91_add_device_eth(struct macb_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * MMC / SD - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc0_data, mmc1_data; - -static struct resource mmc0_resources[] = { - [0] = { - .start = AT91CAP9_BASE_MCI0, - .end = AT91CAP9_BASE_MCI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_MCI0, - .end = AT91CAP9_ID_MCI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_mmc0_device = { - .name = "at91_mci", - .id = 0, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc0_data, - }, - .resource = mmc0_resources, - .num_resources = ARRAY_SIZE(mmc0_resources), -}; - -static struct resource mmc1_resources[] = { - [0] = { - .start = AT91CAP9_BASE_MCI1, - .end = AT91CAP9_BASE_MCI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_MCI1, - .end = AT91CAP9_ID_MCI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_mmc1_device = { - .name = "at91_mci", - .id = 1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc1_data, - }, - .resource = mmc1_resources, - .num_resources = ARRAY_SIZE(mmc1_resources), -}; - -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) -{ - if (!data) - return; - - /* input/irq */ - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (gpio_is_valid(data->wp_pin)) - at91_set_gpio_input(data->wp_pin, 1); - if (gpio_is_valid(data->vcc_pin)) - at91_set_gpio_output(data->vcc_pin, 0); - - if (mmc_id == 0) { /* MCI0 */ - /* CLK */ - at91_set_A_periph(AT91_PIN_PA2, 0); - - /* CMD */ - at91_set_A_periph(AT91_PIN_PA1, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA0, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA3, 1); - at91_set_A_periph(AT91_PIN_PA4, 1); - at91_set_A_periph(AT91_PIN_PA5, 1); - } - - mmc0_data = *data; - platform_device_register(&at91cap9_mmc0_device); - } else { /* MCI1 */ - /* CLK */ - at91_set_A_periph(AT91_PIN_PA16, 0); - - /* CMD */ - at91_set_A_periph(AT91_PIN_PA17, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA18, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA19, 1); - at91_set_A_periph(AT91_PIN_PA20, 1); - at91_set_A_periph(AT91_PIN_PA21, 1); - } - - mmc1_data = *data; - platform_device_register(&at91cap9_mmc1_device); - } -} -#else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * NAND / SmartMedia - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) -static struct atmel_nand_data nand_data; - -#define NAND_BASE AT91_CHIPSELECT_3 - -static struct resource nand_resources[] = { - [0] = { - .start = NAND_BASE, - .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_BASE_ECC, - .end = AT91CAP9_BASE_ECC + SZ_512 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91cap9_nand_device = { - .name = "atmel_nand", - .id = -1, - .dev = { - .platform_data = &nand_data, - }, - .resource = nand_resources, - .num_resources = ARRAY_SIZE(nand_resources), -}; - -void __init at91_add_device_nand(struct atmel_nand_data *data) -{ - unsigned long csa; - - if (!data) - return; - - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA); - - /* enable pin */ - if (gpio_is_valid(data->enable_pin)) - at91_set_gpio_output(data->enable_pin, 1); - - /* ready/busy pin */ - if (gpio_is_valid(data->rdy_pin)) - at91_set_gpio_input(data->rdy_pin, 1); - - /* card detect pin */ - if (gpio_is_valid(data->det_pin)) - at91_set_gpio_input(data->det_pin, 1); - - nand_data = *data; - platform_device_register(&at91cap9_nand_device); -} -#else -void __init at91_add_device_nand(struct atmel_nand_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * TWI (i2c) - * -------------------------------------------------------------------- */ - -/* - * Prefer the GPIO code since the TWI controller isn't robust - * (gets overruns and underruns under load) and can only issue - * repeated STARTs in one scenario (the driver doesn't yet handle them). - */ -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) - -static struct i2c_gpio_platform_data pdata = { - .sda_pin = AT91_PIN_PB4, - .sda_is_open_drain = 1, - .scl_pin = AT91_PIN_PB5, - .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ -}; - -static struct platform_device at91cap9_twi_device = { - .name = "i2c-gpio", - .id = -1, - .dev.platform_data = &pdata, -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */ - at91_set_multi_drive(AT91_PIN_PB4, 1); - - at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */ - at91_set_multi_drive(AT91_PIN_PB5, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91cap9_twi_device); -} - -#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) - -static struct resource twi_resources[] = { - [0] = { - .start = AT91CAP9_BASE_TWI, - .end = AT91CAP9_BASE_TWI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_TWI, - .end = AT91CAP9_ID_TWI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_twi_device = { - .name = "at91_i2c", - .id = -1, - .resource = twi_resources, - .num_resources = ARRAY_SIZE(twi_resources), -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - /* pins used for TWI interface */ - at91_set_B_periph(AT91_PIN_PB4, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PB4, 1); - - at91_set_B_periph(AT91_PIN_PB5, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PB5, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91cap9_twi_device); -} -#else -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} -#endif - -/* -------------------------------------------------------------------- - * SPI - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = DMA_BIT_MASK(32); - -static struct resource spi0_resources[] = { - [0] = { - .start = AT91CAP9_BASE_SPI0, - .end = AT91CAP9_BASE_SPI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_SPI0, - .end = AT91CAP9_ID_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_spi0_device = { - .name = "atmel_spi", - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi0_resources, - .num_resources = ARRAY_SIZE(spi0_resources), -}; - -static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 }; - -static struct resource spi1_resources[] = { - [0] = { - .start = AT91CAP9_BASE_SPI1, - .end = AT91CAP9_BASE_SPI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_SPI1, - .end = AT91CAP9_ID_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_spi1_device = { - .name = "atmel_spi", - .id = 1, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi1_resources, - .num_resources = ARRAY_SIZE(spi1_resources), -}; - -static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 }; - -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) -{ - int i; - unsigned long cs_pin; - short enable_spi0 = 0; - short enable_spi1 = 0; - - /* Choose SPI chip-selects */ - for (i = 0; i < nr_devices; i++) { - if (devices[i].controller_data) - cs_pin = (unsigned long) devices[i].controller_data; - else if (devices[i].bus_num == 0) - cs_pin = spi0_standard_cs[devices[i].chip_select]; - else - cs_pin = spi1_standard_cs[devices[i].chip_select]; - - if (devices[i].bus_num == 0) - enable_spi0 = 1; - else - enable_spi1 = 1; - - /* enable chip-select pin */ - at91_set_gpio_output(cs_pin, 1); - - /* pass chip-select pin to driver */ - devices[i].controller_data = (void *) cs_pin; - } - - spi_register_board_info(devices, nr_devices); - - /* Configure SPI bus(es) */ - if (enable_spi0) { - at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ - at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ - at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - - platform_device_register(&at91cap9_spi0_device); - } - if (enable_spi1) { - at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */ - at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ - at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ - - platform_device_register(&at91cap9_spi1_device); - } -} -#else -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * Timer/Counter block - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_ATMEL_TCLIB - -static struct resource tcb_resources[] = { - [0] = { - .start = AT91CAP9_BASE_TCB0, - .end = AT91CAP9_BASE_TCB0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_TCB, - .end = AT91CAP9_ID_TCB, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_tcb_device = { - .name = "atmel_tcb", - .id = 0, - .resource = tcb_resources, - .num_resources = ARRAY_SIZE(tcb_resources), -}; - -static void __init at91_add_device_tc(void) -{ - platform_device_register(&at91cap9_tcb_device); -} -#else -static void __init at91_add_device_tc(void) { } -#endif - - -/* -------------------------------------------------------------------- - * RTT - * -------------------------------------------------------------------- */ - -static struct resource rtt_resources[] = { - { - .start = AT91CAP9_BASE_RTT, - .end = AT91CAP9_BASE_RTT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91cap9_rtt_device = { - .name = "at91_rtt", - .id = 0, - .resource = rtt_resources, - .num_resources = ARRAY_SIZE(rtt_resources), -}; - -static void __init at91_add_device_rtt(void) -{ - platform_device_register(&at91cap9_rtt_device); -} - - -/* -------------------------------------------------------------------- - * Watchdog - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) -static struct resource wdt_resources[] = { - { - .start = AT91CAP9_BASE_WDT, - .end = AT91CAP9_BASE_WDT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91cap9_wdt_device = { - .name = "at91_wdt", - .id = -1, - .resource = wdt_resources, - .num_resources = ARRAY_SIZE(wdt_resources), -}; - -static void __init at91_add_device_watchdog(void) -{ - platform_device_register(&at91cap9_wdt_device); -} -#else -static void __init at91_add_device_watchdog(void) {} -#endif - - -/* -------------------------------------------------------------------- - * PWM - * --------------------------------------------------------------------*/ - -#if defined(CONFIG_ATMEL_PWM) -static u32 pwm_mask; - -static struct resource pwm_resources[] = { - [0] = { - .start = AT91CAP9_BASE_PWMC, - .end = AT91CAP9_BASE_PWMC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_PWMC, - .end = AT91CAP9_ID_PWMC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_pwm0_device = { - .name = "atmel_pwm", - .id = -1, - .dev = { - .platform_data = &pwm_mask, - }, - .resource = pwm_resources, - .num_resources = ARRAY_SIZE(pwm_resources), -}; - -void __init at91_add_device_pwm(u32 mask) -{ - if (mask & (1 << AT91_PWM0)) - at91_set_A_periph(AT91_PIN_PB19, 1); /* enable PWM0 */ - - if (mask & (1 << AT91_PWM1)) - at91_set_B_periph(AT91_PIN_PB8, 1); /* enable PWM1 */ - - if (mask & (1 << AT91_PWM2)) - at91_set_B_periph(AT91_PIN_PC29, 1); /* enable PWM2 */ - - if (mask & (1 << AT91_PWM3)) - at91_set_B_periph(AT91_PIN_PA11, 1); /* enable PWM3 */ - - pwm_mask = mask; - - platform_device_register(&at91cap9_pwm0_device); -} -#else -void __init at91_add_device_pwm(u32 mask) {} -#endif - - - -/* -------------------------------------------------------------------- - * AC97 - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE) -static u64 ac97_dmamask = DMA_BIT_MASK(32); -static struct ac97c_platform_data ac97_data; - -static struct resource ac97_resources[] = { - [0] = { - .start = AT91CAP9_BASE_AC97C, - .end = AT91CAP9_BASE_AC97C + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_AC97C, - .end = AT91CAP9_ID_AC97C, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_ac97_device = { - .name = "atmel_ac97c", - .id = 1, - .dev = { - .dma_mask = &ac97_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &ac97_data, - }, - .resource = ac97_resources, - .num_resources = ARRAY_SIZE(ac97_resources), -}; - -void __init at91_add_device_ac97(struct ac97c_platform_data *data) -{ - if (!data) - return; - - at91_set_A_periph(AT91_PIN_PA6, 0); /* AC97FS */ - at91_set_A_periph(AT91_PIN_PA7, 0); /* AC97CK */ - at91_set_A_periph(AT91_PIN_PA8, 0); /* AC97TX */ - at91_set_A_periph(AT91_PIN_PA9, 0); /* AC97RX */ - - /* reset */ - if (gpio_is_valid(data->reset_pin)) - at91_set_gpio_output(data->reset_pin, 0); - - ac97_data = *data; - platform_device_register(&at91cap9_ac97_device); -} -#else -void __init at91_add_device_ac97(struct ac97c_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * LCD Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static u64 lcdc_dmamask = DMA_BIT_MASK(32); -static struct atmel_lcdfb_info lcdc_data; - -static struct resource lcdc_resources[] = { - [0] = { - .start = AT91CAP9_LCDC_BASE, - .end = AT91CAP9_LCDC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_LCDC, - .end = AT91CAP9_ID_LCDC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_lcdc_device = { - .name = "atmel_lcdfb", - .id = 0, - .dev = { - .dma_mask = &lcdc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &lcdc_data, - }, - .resource = lcdc_resources, - .num_resources = ARRAY_SIZE(lcdc_resources), -}; - -void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) -{ - if (!data) - return; - - if (cpu_is_at91cap9_revB()) - irq_set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH); - - at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ - at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ - at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ - at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */ - at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */ - at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */ - at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */ - at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */ - at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */ - at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */ - at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */ - at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */ - at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */ - at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */ - at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */ - at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */ - at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */ - at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */ - at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */ - at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */ - at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */ - at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */ - - lcdc_data = *data; - platform_device_register(&at91_lcdc_device); -} -#else -void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} -#endif - - -/* -------------------------------------------------------------------- - * SSC -- Synchronous Serial Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) -static u64 ssc0_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc0_resources[] = { - [0] = { - .start = AT91CAP9_BASE_SSC0, - .end = AT91CAP9_BASE_SSC0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_SSC0, - .end = AT91CAP9_ID_SSC0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_ssc0_device = { - .name = "ssc", - .id = 0, - .dev = { - .dma_mask = &ssc0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc0_resources, - .num_resources = ARRAY_SIZE(ssc0_resources), -}; - -static inline void configure_ssc0_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_A_periph(AT91_PIN_PB0, 1); - if (pins & ATMEL_SSC_TK) - at91_set_A_periph(AT91_PIN_PB1, 1); - if (pins & ATMEL_SSC_TD) - at91_set_A_periph(AT91_PIN_PB2, 1); - if (pins & ATMEL_SSC_RD) - at91_set_A_periph(AT91_PIN_PB3, 1); - if (pins & ATMEL_SSC_RK) - at91_set_A_periph(AT91_PIN_PB4, 1); - if (pins & ATMEL_SSC_RF) - at91_set_A_periph(AT91_PIN_PB5, 1); -} - -static u64 ssc1_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc1_resources[] = { - [0] = { - .start = AT91CAP9_BASE_SSC1, - .end = AT91CAP9_BASE_SSC1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_SSC1, - .end = AT91CAP9_ID_SSC1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_ssc1_device = { - .name = "ssc", - .id = 1, - .dev = { - .dma_mask = &ssc1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc1_resources, - .num_resources = ARRAY_SIZE(ssc1_resources), -}; - -static inline void configure_ssc1_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_A_periph(AT91_PIN_PB6, 1); - if (pins & ATMEL_SSC_TK) - at91_set_A_periph(AT91_PIN_PB7, 1); - if (pins & ATMEL_SSC_TD) - at91_set_A_periph(AT91_PIN_PB8, 1); - if (pins & ATMEL_SSC_RD) - at91_set_A_periph(AT91_PIN_PB9, 1); - if (pins & ATMEL_SSC_RK) - at91_set_A_periph(AT91_PIN_PB10, 1); - if (pins & ATMEL_SSC_RF) - at91_set_A_periph(AT91_PIN_PB11, 1); -} - -/* - * SSC controllers are accessed through library code, instead of any - * kind of all-singing/all-dancing driver. For example one could be - * used by a particular I2S audio codec's driver, while another one - * on the same system might be used by a custom data capture driver. - */ -void __init at91_add_device_ssc(unsigned id, unsigned pins) -{ - struct platform_device *pdev; - - /* - * NOTE: caller is responsible for passing information matching - * "pins" to whatever will be using each particular controller. - */ - switch (id) { - case AT91CAP9_ID_SSC0: - pdev = &at91cap9_ssc0_device; - configure_ssc0_pins(pins); - break; - case AT91CAP9_ID_SSC1: - pdev = &at91cap9_ssc1_device; - configure_ssc1_pins(pins); - break; - default: - return; - } - - platform_device_register(pdev); -} - -#else -void __init at91_add_device_ssc(unsigned id, unsigned pins) {} -#endif - - -/* -------------------------------------------------------------------- - * UART - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SERIAL_ATMEL) -static struct resource dbgu_resources[] = { - [0] = { - .start = AT91CAP9_BASE_DBGU, - .end = AT91CAP9_BASE_DBGU + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data dbgu_data = { - .use_dma_tx = 0, - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ -}; - -static u64 dbgu_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91cap9_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { - .dma_mask = &dbgu_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -}; - -static inline void configure_dbgu_pins(void) -{ - at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ - at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ -} - -static struct resource uart0_resources[] = { - [0] = { - .start = AT91CAP9_BASE_US0, - .end = AT91CAP9_BASE_US0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_US0, - .end = AT91CAP9_ID_US0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart0_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart0_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91cap9_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { - .dma_mask = &uart0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), -}; - -static inline void configure_usart0_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PA24, 0); /* RTS0 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PA25, 0); /* CTS0 */ -} - -static struct resource uart1_resources[] = { - [0] = { - .start = AT91CAP9_BASE_US1, - .end = AT91CAP9_BASE_US1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_US1, - .end = AT91CAP9_ID_US1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart1_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart1_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91cap9_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { - .dma_mask = &uart1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), -}; - -static inline void configure_usart1_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */ -} - -static struct resource uart2_resources[] = { - [0] = { - .start = AT91CAP9_BASE_US2, - .end = AT91CAP9_BASE_US2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_US2, - .end = AT91CAP9_ID_US2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart2_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart2_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91cap9_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { - .dma_mask = &uart2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), -}; - -static inline void configure_usart2_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ -} - -static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ - -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -{ - struct platform_device *pdev; - struct atmel_uart_data *pdata; - - switch (id) { - case 0: /* DBGU */ - pdev = &at91cap9_dbgu_device; - configure_dbgu_pins(); - break; - case AT91CAP9_ID_US0: - pdev = &at91cap9_uart0_device; - configure_usart0_pins(pins); - break; - case AT91CAP9_ID_US1: - pdev = &at91cap9_uart1_device; - configure_usart1_pins(pins); - break; - case AT91CAP9_ID_US2: - pdev = &at91cap9_uart2_device; - configure_usart2_pins(pins); - break; - default: - return; - } - pdata = pdev->dev.platform_data; - pdata->num = portnr; /* update to mapped ID */ - - if (portnr < ATMEL_MAX_UART) - at91_uarts[portnr] = pdev; -} - -void __init at91_set_serial_console(unsigned portnr) -{ - if (portnr < ATMEL_MAX_UART) { - atmel_default_console_device = at91_uarts[portnr]; - at91cap9_set_console_clock(at91_uarts[portnr]->id); - } -} - -void __init at91_add_device_serial(void) -{ - int i; - - for (i = 0; i < ATMEL_MAX_UART; i++) { - if (at91_uarts[i]) - platform_device_register(at91_uarts[i]); - } - - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} -#else -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_set_serial_console(unsigned portnr) {} -void __init at91_add_device_serial(void) {} -#endif - - -/* -------------------------------------------------------------------- */ -/* - * These devices are always present and don't need any board-specific - * setup. - */ -static int __init at91_add_standard_devices(void) -{ - at91_add_device_rtt(); - at91_add_device_watchdog(); - at91_add_device_tc(); - return 0; -} - -arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c deleted file mode 100644 index ac3de4f7c31d..000000000000 --- a/arch/arm/mach-at91/board-cap9adk.c +++ /dev/null @@ -1,396 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-cap9adk.c - * - * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2005 SAN People - * Copyright (C) 2007 Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/fb.h> -#include <linux/mtd/physmap.h> - -#include <video/atmel_lcdc.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/board.h> -#include <mach/at91cap9_matrix.h> -#include <mach/at91sam9_smc.h> -#include <mach/system_rev.h> - -#include "sam9_smc.h" -#include "generic.h" - - -static void __init cap9adk_init_early(void) -{ - /* Initialize processor: 12 MHz crystal */ - at91_initialize(12000000); - - /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */ - at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11); - /* ... POWER LED always on */ - at91_set_gpio_output(AT91_PIN_PC29, 1); - - /* Setup the serial ports and console */ - at91_register_uart(0, 0, 0); /* DBGU = ttyS0 */ - at91_set_serial_console(0); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata cap9adk_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB HS Device port - */ -static struct usba_platform_data __initdata cap9adk_usba_udc_data = { - .vbus_pin = AT91_PIN_PB31, -}; - -/* - * ADS7846 Touchscreen - */ -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -static int ads7843_pendown_state(void) -{ - return !at91_get_gpio_value(AT91_PIN_PC4); /* Touchscreen PENIRQ */ -} - -static struct ads7846_platform_data ads_info = { - .model = 7843, - .x_min = 150, - .x_max = 3830, - .y_min = 190, - .y_max = 3830, - .vref_delay_usecs = 100, - .x_plate_ohms = 450, - .y_plate_ohms = 250, - .pressure_max = 15000, - .debounce_max = 1, - .debounce_rep = 0, - .debounce_tol = (~0), - .get_pendown_state = ads7843_pendown_state, -}; - -static void __init cap9adk_add_device_ts(void) -{ - at91_set_gpio_input(AT91_PIN_PC4, 1); /* Touchscreen PENIRQ */ - at91_set_gpio_input(AT91_PIN_PC5, 1); /* Touchscreen BUSY */ -} -#else -static void __init cap9adk_add_device_ts(void) {} -#endif - - -/* - * SPI devices. - */ -static struct spi_board_info cap9adk_spi_devices[] = { -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* DataFlash card */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - { - .modalias = "ads7846", - .chip_select = 3, /* can be 2 or 3, depending on J2 jumper */ - .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ - .bus_num = 0, - .platform_data = &ads_info, - .irq = AT91_PIN_PC4, - }, -#endif -}; - - -/* - * MCI (SD/MMC) - */ -static struct at91_mmc_data __initdata cap9adk_mmc_data = { - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata cap9adk_macb_data = { - .phy_irq_pin = -EINVAL, - .is_rmii = 1, -}; - - -/* - * NAND flash - */ -static struct mtd_partition __initdata cap9adk_nand_partitions[] = { - { - .name = "NAND partition", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata cap9adk_nand_data = { - .ale = 21, - .cle = 22, - .det_pin = -EINVAL, - .rdy_pin = -EINVAL, - .enable_pin = AT91_PIN_PD15, - .parts = cap9adk_nand_partitions, - .num_parts = ARRAY_SIZE(cap9adk_nand_partitions), -}; - -static struct sam9_smc_config __initdata cap9adk_nand_smc_config = { - .ncs_read_setup = 1, - .nrd_setup = 2, - .ncs_write_setup = 1, - .nwe_setup = 2, - - .ncs_read_pulse = 6, - .nrd_pulse = 4, - .ncs_write_pulse = 6, - .nwe_pulse = 4, - - .read_cycle = 8, - .write_cycle = 8, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 1, -}; - -static void __init cap9adk_add_device_nand(void) -{ - unsigned long csa; - - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); - - cap9adk_nand_data.bus_width_16 = board_have_nand_16bit(); - /* setup bus-width (8 or 16) */ - if (cap9adk_nand_data.bus_width_16) - cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &cap9adk_nand_smc_config); - - at91_add_device_nand(&cap9adk_nand_data); -} - - -/* - * NOR flash - */ -static struct mtd_partition cap9adk_nor_partitions[] = { - { - .name = "NOR partition", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct physmap_flash_data cap9adk_nor_data = { - .width = 2, - .parts = cap9adk_nor_partitions, - .nr_parts = ARRAY_SIZE(cap9adk_nor_partitions), -}; - -#define NOR_BASE AT91_CHIPSELECT_0 -#define NOR_SIZE SZ_8M - -static struct resource nor_flash_resources[] = { - { - .start = NOR_BASE, - .end = NOR_BASE + NOR_SIZE - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device cap9adk_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &cap9adk_nor_data, - }, - .resource = nor_flash_resources, - .num_resources = ARRAY_SIZE(nor_flash_resources), -}; - -static struct sam9_smc_config __initdata cap9adk_nor_smc_config = { - .ncs_read_setup = 2, - .nrd_setup = 4, - .ncs_write_setup = 2, - .nwe_setup = 4, - - .ncs_read_pulse = 10, - .nrd_pulse = 8, - .ncs_write_pulse = 10, - .nwe_pulse = 8, - - .read_cycle = 16, - .write_cycle = 16, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16, - .tdf_cycles = 1, -}; - -static __init void cap9adk_add_device_nor(void) -{ - unsigned long csa; - - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); - - /* configure chip-select 0 (NOR) */ - sam9_smc_configure(0, 0, &cap9adk_nor_smc_config); - - platform_device_register(&cap9adk_nor_flash); -} - - -/* - * LCD Controller - */ -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static struct fb_videomode at91_tft_vga_modes[] = { - { - .name = "TX09D50VM1CCA @ 60", - .refresh = 60, - .xres = 240, .yres = 320, - .pixclock = KHZ2PICOS(4965), - - .left_margin = 1, .right_margin = 33, - .upper_margin = 1, .lower_margin = 0, - .hsync_len = 5, .vsync_len = 1, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, -}; - -static struct fb_monspecs at91fb_default_monspecs = { - .manufacturer = "HIT", - .monitor = "TX09D70VM1CCA", - - .modedb = at91_tft_vga_modes, - .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), - .hfmin = 15000, - .hfmax = 64000, - .vfmin = 50, - .vfmax = 150, -}; - -#define AT91CAP9_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ - | ATMEL_LCDC_DISTYPE_TFT \ - | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) - -static void at91_lcdc_power_control(int on) -{ - if (on) - at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */ - else - at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */ -} - -/* Driver datas */ -static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data = { - .default_bpp = 16, - .default_dmacon = ATMEL_LCDC_DMAEN, - .default_lcdcon2 = AT91CAP9_DEFAULT_LCDCON2, - .default_monspecs = &at91fb_default_monspecs, - .atmel_lcdfb_power_control = at91_lcdc_power_control, - .guard_time = 1, -}; - -#else -static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data; -#endif - - -/* - * AC97 - */ -static struct ac97c_platform_data cap9adk_ac97_data = { - .reset_pin = -EINVAL, -}; - - -static void __init cap9adk_board_init(void) -{ - /* Serial */ - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&cap9adk_usbh_data); - /* USB HS */ - at91_add_device_usba(&cap9adk_usba_udc_data); - /* SPI */ - at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices)); - /* Touchscreen */ - cap9adk_add_device_ts(); - /* MMC */ - at91_add_device_mmc(1, &cap9adk_mmc_data); - /* Ethernet */ - at91_add_device_eth(&cap9adk_macb_data); - /* NAND */ - cap9adk_add_device_nand(); - /* NOR Flash */ - cap9adk_add_device_nor(); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* LCD Controller */ - at91_add_device_lcdc(&cap9adk_lcdc_data); - /* AC97 */ - at91_add_device_ac97(&cap9adk_ac97_data); -} - -MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") - /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */ - .timer = &at91sam926x_timer, - .map_io = at91_map_io, - .init_early = cap9adk_init_early, - .init_irq = at91_init_irq_default, - .init_machine = cap9adk_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 61873f3aa92d..aa04e22a9da6 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -47,8 +47,7 @@ /* * Chips have some kind of clocks : group them by functionality */ -#define cpu_has_utmi() ( cpu_is_at91cap9() \ - || cpu_is_at91sam9rl() \ +#define cpu_has_utmi() ( cpu_is_at91sam9rl() \ || cpu_is_at91sam9g45()) #define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \ @@ -602,8 +601,6 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock) cpu_is_at91sam9g10()) { uhpck.pmc_mask = AT91SAM926x_PMC_UHP; udpck.pmc_mask = AT91SAM926x_PMC_UDP; - } else if (cpu_is_at91cap9()) { - uhpck.pmc_mask = AT91CAP9_PMC_UHP; } at91_sys_write(AT91_CKGR_PLLBR, 0); diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c index a851e6c98421..555d956b3a57 100644 --- a/arch/arm/mach-at91/cpuidle.c +++ b/arch/arm/mach-at91/cpuidle.c @@ -39,20 +39,15 @@ static int at91_enter_idle(struct cpuidle_device *dev, { struct timeval before, after; int idle_time; - u32 saved_lpr; local_irq_disable(); do_gettimeofday(&before); if (index == 0) /* Wait for interrupt state */ cpu_do_idle(); - else if (index == 1) { - asm("b 1f; .align 5; 1:"); - asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */ - saved_lpr = sdram_selfrefresh_enable(); - cpu_do_idle(); - sdram_selfrefresh_disable(saved_lpr); - } + else if (index == 1) + at91_standby(); + do_gettimeofday(&after); local_irq_enable(); idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 594133451c0c..7e8280e798c1 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -45,7 +45,6 @@ extern void __init at91sam9261_set_console_clock(int id); extern void __init at91sam9263_set_console_clock(int id); extern void __init at91sam9rl_set_console_clock(int id); extern void __init at91sam9g45_set_console_clock(int id); -extern void __init at91cap9_set_console_clock(int id); #ifdef CONFIG_AT91_PMC_UNIT extern int __init at91_clock_init(unsigned long main_clock); #else diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index e46f93e34aab..dbdd6ae473d5 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -23,10 +23,8 @@ #define AT91_PMC_PCK (1 << 0) /* Processor Clock */ #define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ #define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ -#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [CAP9 revC & some SAM9 only] */ #define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ #define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ -#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */ #define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */ #define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ #define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ @@ -40,7 +38,7 @@ #define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ #define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ -#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9, CAP9] */ +#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9] */ #define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */ #define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */ #define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */ @@ -48,7 +46,7 @@ #define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ -#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */ +#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x] */ #define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ #define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */ @@ -87,7 +85,7 @@ #define AT91RM9200_PMC_MDIV_2 (1 << 8) #define AT91RM9200_PMC_MDIV_3 (2 << 8) #define AT91RM9200_PMC_MDIV_4 (3 << 8) -#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */ +#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9 only] */ #define AT91SAM9_PMC_MDIV_2 (1 << 8) #define AT91SAM9_PMC_MDIV_4 (2 << 8) #define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */ @@ -117,17 +115,15 @@ #define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ #define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ #define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ -#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9, AT91CAP9 only] */ -#define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */ +#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9] */ #define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ #define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ #define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ #define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ #define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */ -#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Protect Register [AT91CAP9 revC only] */ +#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Write Protect Mode Register [some SAM9] */ #define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */ -#define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */ #endif diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h deleted file mode 100644 index 61d952902f2b..000000000000 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91cap9.h - * - * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2007 Atmel Corporation. - * - * Common definitions. - * Based on AT91CAP9 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91CAP9_H -#define AT91CAP9_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */ -#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */ -#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */ -#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */ -#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */ -#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */ -#define AT91CAP9_ID_US0 8 /* USART 0 */ -#define AT91CAP9_ID_US1 9 /* USART 1 */ -#define AT91CAP9_ID_US2 10 /* USART 2 */ -#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */ -#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */ -#define AT91CAP9_ID_CAN 13 /* CAN */ -#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */ -#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */ -#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */ -#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */ -#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */ -#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */ -#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */ -#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */ -#define AT91CAP9_ID_EMAC 22 /* Ethernet */ -#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */ -#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */ -#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */ -#define AT91CAP9_ID_LCDC 26 /* LCD Controller */ -#define AT91CAP9_ID_DMA 27 /* DMA Controller */ -#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */ -#define AT91CAP9_ID_UHP 29 /* USB Host Port */ -#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */ - -/* - * User Peripheral physical base addresses. - */ -#define AT91CAP9_BASE_UDPHS 0xfff78000 -#define AT91CAP9_BASE_TCB0 0xfff7c000 -#define AT91CAP9_BASE_TC0 0xfff7c000 -#define AT91CAP9_BASE_TC1 0xfff7c040 -#define AT91CAP9_BASE_TC2 0xfff7c080 -#define AT91CAP9_BASE_MCI0 0xfff80000 -#define AT91CAP9_BASE_MCI1 0xfff84000 -#define AT91CAP9_BASE_TWI 0xfff88000 -#define AT91CAP9_BASE_US0 0xfff8c000 -#define AT91CAP9_BASE_US1 0xfff90000 -#define AT91CAP9_BASE_US2 0xfff94000 -#define AT91CAP9_BASE_SSC0 0xfff98000 -#define AT91CAP9_BASE_SSC1 0xfff9c000 -#define AT91CAP9_BASE_AC97C 0xfffa0000 -#define AT91CAP9_BASE_SPI0 0xfffa4000 -#define AT91CAP9_BASE_SPI1 0xfffa8000 -#define AT91CAP9_BASE_CAN 0xfffac000 -#define AT91CAP9_BASE_PWMC 0xfffb8000 -#define AT91CAP9_BASE_EMAC 0xfffbc000 -#define AT91CAP9_BASE_ADC 0xfffc0000 -#define AT91CAP9_BASE_ISI 0xfffc4000 - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS) -#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_GPBR (cpu_is_at91cap9_revB() ? \ - (0xfffffd50 - AT91_BASE_SYS) : \ - (0xfffffd60 - AT91_BASE_SYS)) - -#define AT91CAP9_BASE_ECC 0xffffe200 -#define AT91CAP9_BASE_DMA 0xffffec00 -#define AT91CAP9_BASE_SMC 0xffffe800 -#define AT91CAP9_BASE_DBGU AT91_BASE_DBGU1 -#define AT91CAP9_BASE_PIOA 0xfffff200 -#define AT91CAP9_BASE_PIOB 0xfffff400 -#define AT91CAP9_BASE_PIOC 0xfffff600 -#define AT91CAP9_BASE_PIOD 0xfffff800 -#define AT91CAP9_BASE_RSTC 0xfffffd00 -#define AT91CAP9_BASE_SHDWC 0xfffffd10 -#define AT91CAP9_BASE_RTT 0xfffffd20 -#define AT91CAP9_BASE_PIT 0xfffffd30 -#define AT91CAP9_BASE_WDT 0xfffffd40 - -#define AT91_USART0 AT91CAP9_BASE_US0 -#define AT91_USART1 AT91CAP9_BASE_US1 -#define AT91_USART2 AT91CAP9_BASE_US2 - - -/* - * Internal Memory. - */ -#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */ -#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */ - -#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */ - -#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */ -#define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */ -#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h deleted file mode 100644 index 4b9d4aff4b4f..000000000000 --- a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h +++ /dev/null @@ -1,137 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91cap9_matrix.h - * - * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2006 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91CAP9 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91CAP9_MATRIX_H -#define AT91CAP9_MATRIX_H - -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ -#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */ -#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */ -#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ -#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */ -#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ -#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */ -#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */ -#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */ -#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ -#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ -#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ -#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ -#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ -#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ - -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) -#define AT91_MATRIX_RCB6 (1 << 6) -#define AT91_MATRIX_RCB7 (1 << 7) -#define AT91_MATRIX_RCB8 (1 << 8) -#define AT91_MATRIX_RCB9 (1 << 9) -#define AT91_MATRIX_RCB10 (1 << 10) -#define AT91_MATRIX_RCB11 (1 << 11) - -#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */ -#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */ - -#define AT91_MATRIX_UDPHS (AT91_MATRIX + 0x118) /* USBHS Special Function Register [AT91CAP9 only] */ -#define AT91_MATRIX_SELECT_UDPHS (0 << 31) /* select High Speed UDP */ -#define AT91_MATRIX_SELECT_UDP (1 << 31) /* select standard UDP */ -#define AT91_MATRIX_UDPHS_BYPASS_LOCK (1 << 30) /* bypass lock bit */ - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1) -#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) -#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) -#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */ -#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) - -#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */ -#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */ -#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h index e2f8da8ce5bc..5d4a9f846584 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h @@ -59,7 +59,6 @@ #define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ #define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ #define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */ -#define AT91CAP9_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ #define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay [SAM9 Only] */ #define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ @@ -76,7 +75,6 @@ #define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */ #define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */ -#define AT91CAP9_DDRSDRC_LPR 0x18 /* Low Power Register */ #define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ #define AT91_DDRSDRC_LPCB_DISABLE 0 #define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 @@ -94,11 +92,9 @@ #define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */ #define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */ -#define AT91CAP9_DDRSDRC_MDR 0x1C /* Memory Device Register */ #define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ #define AT91_DDRSDRC_MD_SDR 0 #define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 -#define AT91CAP9_DDRSDRC_MD_DDR 2 #define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 #define AT91_DDRSDRC_MD_DDR2 6 /* [SAM9 Only] */ #define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */ @@ -106,16 +102,10 @@ #define AT91_DDRSDRC_DBW_16BITS (1 << 4) #define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */ -#define AT91CAP9_DDRSDRC_DLL 0x20 /* DLL Information Register */ #define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ #define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ #define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ -#define AT91CAP9_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */ -#define AT91CAP9_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */ -#define AT91CAP9_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */ #define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ -#define AT91CAP9_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ -#define AT91CAP9_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ #define AT91_DDRSDRC_HS 0x2C /* High Speed Register [SAM9 Only] */ #define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */ diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index f6ce936dba2b..0118c3338552 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -25,7 +25,6 @@ #define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */ #define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */ #define ARCH_ID_AT91SAM9X5 0x819a05a0 -#define ARCH_ID_AT91CAP9 0x039A03A0 #define ARCH_ID_AT91SAM9XE128 0x329973a0 #define ARCH_ID_AT91SAM9XE256 0x329a93a0 @@ -51,10 +50,6 @@ #define ARCH_FAMILY_AT91SAM9 0x01900000 #define ARCH_FAMILY_AT91SAM9XE 0x02900000 -/* PMC revision */ -#define ARCH_REVISION_CAP9_B 0x399 -#define ARCH_REVISION_CAP9_C 0x601 - /* RM9200 type */ #define ARCH_REVISON_9200_BGA (0 << 0) #define ARCH_REVISON_9200_PQFP (1 << 0) @@ -63,9 +58,6 @@ enum at91_soc_type { /* 920T */ AT91_SOC_RM9200, - /* CAP */ - AT91_SOC_CAP9, - /* SAM92xx */ AT91_SOC_SAM9260, AT91_SOC_SAM9261, AT91_SOC_SAM9263, @@ -86,9 +78,6 @@ enum at91_soc_subtype { /* RM9200 */ AT91_SOC_RM9200_BGA, AT91_SOC_RM9200_PQFP, - /* CAP9 */ - AT91_SOC_CAP9_REV_B, AT91_SOC_CAP9_REV_C, - /* SAM9260 */ AT91_SOC_SAM9XE, @@ -195,16 +184,6 @@ static inline int at91_soc_is_detected(void) #define cpu_is_at91sam9x25() (0) #endif -#ifdef CONFIG_ARCH_AT91CAP9 -#define cpu_is_at91cap9() (at91_soc_initdata.type == AT91_SOC_CAP9) -#define cpu_is_at91cap9_revB() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_B) -#define cpu_is_at91cap9_revC() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_C) -#else -#define cpu_is_at91cap9() (0) -#define cpu_is_at91cap9_revB() (0) -#define cpu_is_at91cap9_revC() (0) -#endif - /* * Since this is ARM, we will never run on any AVR32 CPU. But these * definitions may reduce clutter in common drivers. diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 2d0e4e998566..c213f28628c0 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -19,7 +19,7 @@ /* DBGU base */ /* rm9200, 9260/9g20, 9261/9g10, 9rl */ #define AT91_BASE_DBGU0 0xfffff200 -/* 9263, 9g45, cap9 */ +/* 9263, 9g45 */ #define AT91_BASE_DBGU1 0xffffee00 #if defined(CONFIG_ARCH_AT91RM9200) @@ -34,8 +34,6 @@ #include <mach/at91sam9rl.h> #elif defined(CONFIG_ARCH_AT91SAM9G45) #include <mach/at91sam9g45.h> -#elif defined(CONFIG_ARCH_AT91CAP9) -#include <mach/at91cap9.h> #elif defined(CONFIG_ARCH_AT91X40) #include <mach/at91x40.h> #else diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 1606379ac284..d554e6771b4e 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -150,11 +150,6 @@ static int at91_pm_verify_clocks(void) pr_err("AT91: PM - Suspend-to-RAM with USB still active\n"); return 0; } - } else if (cpu_is_at91cap9()) { - if ((scsr & AT91CAP9_PMC_UHP) != 0) { - pr_err("AT91: PM - Suspend-to-RAM with USB still active\n"); - return 0; - } } #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS @@ -203,7 +198,6 @@ extern u32 at91_slow_clock_sz; static int at91_pm_enter(suspend_state_t state) { - u32 saved_lpr; at91_gpio_suspend(); at91_irq_suspend(); @@ -259,16 +253,7 @@ static int at91_pm_enter(suspend_state_t state) * For ARM 926 based chips, this requirement is weaker * as at91sam9 can access a RAM in self-refresh mode. */ - asm volatile ( "mov r0, #0\n\t" - "b 1f\n\t" - ".align 5\n\t" - "1: mcr p15, 0, r0, c7, c10, 4\n\t" - : /* no output */ - : /* no input */ - : "r0"); - saved_lpr = sdram_selfrefresh_enable(); - wait_for_interrupt_enable(); - sdram_selfrefresh_disable(saved_lpr); + at91_standby(); break; case PM_SUSPEND_ON: diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 7eb40d24242f..bba9ce1aaaec 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -1,3 +1,16 @@ +/* + * AT91 Power Management + * + * Copyright (C) 2005 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __ARCH_ARM_MACH_AT91_PM +#define __ARCH_ARM_MACH_AT91_PM + #ifdef CONFIG_ARCH_AT91RM9200 #include <mach/at91rm9200_mc.h> @@ -11,36 +24,25 @@ * still in self-refresh is "not recommended", but seems to work. */ -static inline u32 sdram_selfrefresh_enable(void) -{ - u32 saved_lpr = at91_sys_read(AT91_SDRAMC_LPR); - - at91_sys_write(AT91_SDRAMC_LPR, 0); - at91_sys_write(AT91_SDRAMC_SRR, 1); - return saved_lpr; -} - -#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_SDRAMC_LPR, saved_lpr) -#define wait_for_interrupt_enable() asm volatile ("mcr p15, 0, %0, c7, c0, 4" \ - : : "r" (0)) - -#elif defined(CONFIG_ARCH_AT91CAP9) -#include <mach/at91sam9_ddrsdr.h> - - -static inline u32 sdram_selfrefresh_enable(void) +static inline void at91rm9200_standby(void) { - u32 saved_lpr, lpr; - - saved_lpr = at91_ramc_read(0, AT91CAP9_DDRSDRC_LPR); - - lpr = saved_lpr & ~AT91_DDRSDRC_LPCB; - at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); - return saved_lpr; + u32 lpr = at91_sys_read(AT91_SDRAMC_LPR); + + asm volatile( + "b 1f\n\t" + ".align 5\n\t" + "1: mcr p15, 0, %0, c7, c10, 4\n\t" + " str %0, [%1, %2]\n\t" + " str %3, [%1, %4]\n\t" + " mcr p15, 0, %0, c7, c0, 4\n\t" + " str %5, [%1, %2]" + : + : "r" (0), "r" (AT91_BASE_SYS), "r" (AT91_SDRAMC_LPR), + "r" (1), "r" (AT91_SDRAMC_SRR), + "r" (lpr)); } -#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, saved_lpr) -#define wait_for_interrupt_enable() cpu_do_idle() +#define at91_standby at91rm9200_standby #elif defined(CONFIG_ARCH_AT91SAM9G45) #include <mach/at91sam9_ddrsdr.h> @@ -48,14 +50,12 @@ static inline u32 sdram_selfrefresh_enable(void) /* We manage both DDRAM/SDRAM controllers, we need more than one value to * remember. */ -static u32 saved_lpr1; - -static inline u32 sdram_selfrefresh_enable(void) +static inline void at91sam9g45_standby(void) { - /* Those tow values allow us to delay self-refresh activation + /* Those two values allow us to delay self-refresh activation * to the maximum. */ u32 lpr0, lpr1; - u32 saved_lpr0; + u32 saved_lpr0, saved_lpr1; saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR); lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB; @@ -69,15 +69,13 @@ static inline u32 sdram_selfrefresh_enable(void) at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0); at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1); - return saved_lpr0; + cpu_do_idle(); + + at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); + at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); } -#define sdram_selfrefresh_disable(saved_lpr0) \ - do { \ - at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); \ - at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); \ - } while (0) -#define wait_for_interrupt_enable() cpu_do_idle() +#define at91_standby at91sam9g45_standby #else #include <mach/at91sam9_sdramc.h> @@ -90,18 +88,23 @@ static inline u32 sdram_selfrefresh_enable(void) #warning Assuming EB1 SDRAM controller is *NOT* used #endif -static inline u32 sdram_selfrefresh_enable(void) +static inline void at91sam9_standby(void) { u32 saved_lpr, lpr; saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR); lpr = saved_lpr & ~AT91_SDRAMC_LPCB; - at91_ramc_write(0, AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH); - return saved_lpr; + at91_ramc_write(0, AT91_SDRAMC_LPR, lpr | + AT91_SDRAMC_LPCB_SELF_REFRESH); + + cpu_do_idle(); + + at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr); } -#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr) -#define wait_for_interrupt_enable() cpu_do_idle() +#define at91_standby at91sam9_standby + +#endif #endif diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index 92dfb8461392..f8539a8bcd6c 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -18,8 +18,7 @@ #if defined(CONFIG_ARCH_AT91RM9200) #include <mach/at91rm9200_mc.h> -#elif defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) +#elif defined(CONFIG_ARCH_AT91SAM9G45) #include <mach/at91sam9_ddrsdr.h> #else #include <mach/at91sam9_sdramc.h> @@ -130,8 +129,7 @@ ENTRY(at91_slow_clock) /* Put SDRAM in self-refresh mode */ mov r3, #1 str r3, [r2, #AT91_SDRAMC_SRR] -#elif defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) +#elif defined(CONFIG_ARCH_AT91SAM9G45) /* prepare for DDRAM self-refresh mode */ ldr r3, [r2, #AT91_DDRSDRC_LPR] @@ -263,8 +261,7 @@ ENTRY(at91_slow_clock) #ifdef CONFIG_ARCH_AT91RM9200 /* Do nothing - self-refresh is automatically disabled. */ -#elif defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) +#elif defined(CONFIG_ARCH_AT91SAM9G45) /* Restore LPR on AT91 with DDRAM */ ldr r3, .saved_sam9_lpr str r3, [r2, #AT91_DDRSDRC_LPR] @@ -305,8 +302,7 @@ ENTRY(at91_slow_clock) #ifdef CONFIG_ARCH_AT91RM9200 .at91_va_base_sdramc: .word AT91_VA_BASE_SYS -#elif defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) +#elif defined(CONFIG_ARCH_AT91SAM9G45) .at91_va_base_sdramc: .word AT91_VA_BASE_SYS + AT91_DDRSDRC0 #else diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 69d3fc4c46f3..620c67e8f814 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -86,20 +86,6 @@ static void __init soc_detect(u32 dbgu_base) socid = cidr & ~AT91_CIDR_VERSION; switch (socid) { - case ARCH_ID_AT91CAP9: { -#ifdef CONFIG_AT91_PMC_UNIT - u32 pmc_ver = at91_sys_read(AT91_PMC_VER); - - if (pmc_ver == ARCH_REVISION_CAP9_B) - at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_B; - else if (pmc_ver == ARCH_REVISION_CAP9_C) - at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_C; -#endif - at91_soc_initdata.type = AT91_SOC_CAP9; - at91_boot_soc = at91cap9_soc; - break; - } - case ARCH_ID_AT91RM9200: at91_soc_initdata.type = AT91_SOC_RM9200; at91_boot_soc = at91rm9200_soc; @@ -200,7 +186,6 @@ static void __init soc_detect(u32 dbgu_base) static const char *soc_name[] = { [AT91_SOC_RM9200] = "at91rm9200", - [AT91_SOC_CAP9] = "at91cap9", [AT91_SOC_SAM9260] = "at91sam9260", [AT91_SOC_SAM9261] = "at91sam9261", [AT91_SOC_SAM9263] = "at91sam9263", @@ -221,8 +206,6 @@ EXPORT_SYMBOL(at91_get_soc_type); static const char *soc_subtype_name[] = { [AT91_SOC_RM9200_BGA] = "at91rm9200 BGA", [AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP", - [AT91_SOC_CAP9_REV_B] = "at91cap9 revB", - [AT91_SOC_CAP9_REV_C] = "at91cap9 revC", [AT91_SOC_SAM9XE] = "at91sam9xe", [AT91_SOC_SAM9G45ES] = "at91sam9g45es", [AT91_SOC_SAM9M10] = "at91sam9m10", diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index 4588ae6f7acd..5db4aa45404a 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h @@ -13,7 +13,6 @@ struct at91_init_soc { }; extern struct at91_init_soc at91_boot_soc; -extern struct at91_init_soc at91cap9_soc; extern struct at91_init_soc at91rm9200_soc; extern struct at91_init_soc at91sam9260_soc; extern struct at91_init_soc at91sam9261_soc; @@ -27,10 +26,6 @@ static inline int at91_soc_is_enabled(void) return at91_boot_soc.init != NULL; } -#if !defined(CONFIG_ARCH_AT91CAP9) -#define at91cap9_soc at91_boot_soc -#endif - #if !defined(CONFIG_ARCH_AT91RM9200) #define at91rm9200_soc at91_boot_soc #endif diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 275341f159fb..82ed753fb360 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -26,13 +26,14 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/dm355.h> #include <mach/i2c.h> #include <mach/serial.h> #include <mach/nand.h> #include <mach/mmc.h> #include <mach/usb.h> +#include "davinci.h" + /* NOTE: this is geared for the standard config, with a socketed * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you * swap chips, maybe with a different block size, partitioning may diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index e99db28181ae..d74a8b3445fb 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -23,13 +23,14 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/dm355.h> #include <mach/i2c.h> #include <mach/serial.h> #include <mach/nand.h> #include <mach/mmc.h> #include <mach/usb.h> +#include "davinci.h" + /* NOTE: this is geared for the standard config, with a socketed * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you * swap chips, maybe with a different block size, partitioning may diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 849311d3cb7c..5bce2b83bb4f 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -32,7 +32,6 @@ #include <asm/mach/arch.h> #include <mach/mux.h> -#include <mach/dm365.h> #include <mach/common.h> #include <mach/i2c.h> #include <mach/serial.h> @@ -42,6 +41,8 @@ #include <media/tvp514x.h> +#include "davinci.h" + static inline int have_imager(void) { /* REVISIT when it's supported, trigger via Kconfig */ diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 1247ecdcf752..864f676eccac 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -30,7 +30,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/dm644x.h> #include <mach/common.h> #include <mach/i2c.h> #include <mach/serial.h> @@ -40,6 +39,8 @@ #include <mach/usb.h> #include <mach/aemif.h> +#include "davinci.h" + #define DM644X_EVM_PHY_ID "davinci_mdio-0:01" #define LXT971_PHY_ID (0x001378e2) #define LXT971_PHY_MASK (0xfffffff0) @@ -189,7 +190,7 @@ static struct platform_device davinci_fb_device = { .num_resources = 0, }; -static struct tvp514x_platform_data tvp5146_pdata = { +static struct tvp514x_platform_data dm644xevm_tvp5146_pdata = { .clk_polarity = 0, .hs_polarity = 1, .vs_polarity = 1 @@ -197,7 +198,7 @@ static struct tvp514x_platform_data tvp5146_pdata = { #define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) /* Inputs available at the TVP5146 */ -static struct v4l2_input tvp5146_inputs[] = { +static struct v4l2_input dm644xevm_tvp5146_inputs[] = { { .index = 0, .name = "Composite", @@ -217,7 +218,7 @@ static struct v4l2_input tvp5146_inputs[] = { * ouput that goes to vpfe. There is a one to one correspondence * with tvp5146_inputs */ -static struct vpfe_route tvp5146_routes[] = { +static struct vpfe_route dm644xevm_tvp5146_routes[] = { { .input = INPUT_CVBS_VI2B, .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, @@ -228,13 +229,13 @@ static struct vpfe_route tvp5146_routes[] = { }, }; -static struct vpfe_subdev_info vpfe_sub_devs[] = { +static struct vpfe_subdev_info dm644xevm_vpfe_sub_devs[] = { { .name = "tvp5146", .grp_id = 0, - .num_inputs = ARRAY_SIZE(tvp5146_inputs), - .inputs = tvp5146_inputs, - .routes = tvp5146_routes, + .num_inputs = ARRAY_SIZE(dm644xevm_tvp5146_inputs), + .inputs = dm644xevm_tvp5146_inputs, + .routes = dm644xevm_tvp5146_routes, .can_route = 1, .ccdc_if_params = { .if_type = VPFE_BT656, @@ -243,15 +244,15 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = { }, .board_info = { I2C_BOARD_INFO("tvp5146", 0x5d), - .platform_data = &tvp5146_pdata, + .platform_data = &dm644xevm_tvp5146_pdata, }, }, }; -static struct vpfe_config vpfe_cfg = { - .num_subdevs = ARRAY_SIZE(vpfe_sub_devs), +static struct vpfe_config dm644xevm_capture_cfg = { + .num_subdevs = ARRAY_SIZE(dm644xevm_vpfe_sub_devs), .i2c_adapter_id = 1, - .sub_devs = vpfe_sub_devs, + .sub_devs = dm644xevm_vpfe_sub_devs, .card_name = "DM6446 EVM", .ccdc = "DM6446 CCDC", }; @@ -624,8 +625,6 @@ static struct davinci_uart_config uart_config __initdata = { static void __init davinci_evm_map_io(void) { - /* setup input configuration for VPFE input devices */ - dm644x_set_vpfe_config(&vpfe_cfg); dm644x_init(); } @@ -697,6 +696,7 @@ static __init void davinci_evm_init(void) evm_init_i2c(); davinci_setup_mmc(0, &dm6446evm_mmc_config); + dm644x_init_video(&dm644xevm_capture_cfg); davinci_serial_init(&uart_config); dm644x_init_asp(&dm644x_evm_snd_data); diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 872ac69fa049..d72ab948d630 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -36,7 +36,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/dm646x.h> #include <mach/common.h> #include <mach/serial.h> #include <mach/i2c.h> @@ -45,6 +44,7 @@ #include <mach/cdce949.h> #include <mach/aemif.h> +#include "davinci.h" #include "clock.h" #define NAND_BLOCK_SIZE SZ_128K @@ -410,8 +410,6 @@ static struct davinci_i2c_platform_data i2c_pdata = { .bus_delay = 0 /* usec */, }; -#define VIDCLKCTL_OFFSET (DAVINCI_SYSTEM_MODULE_BASE + 0x38) -#define VSCLKDIS_OFFSET (DAVINCI_SYSTEM_MODULE_BASE + 0x6c) #define VCH2CLK_MASK (BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8)) #define VCH2CLK_SYSCLK8 (BIT(9)) #define VCH2CLK_AUXCLK (BIT(9) | BIT(8)) @@ -429,8 +427,6 @@ static struct davinci_i2c_platform_data i2c_pdata = { #define TVP5147_CH0 "tvp514x-0" #define TVP5147_CH1 "tvp514x-1" -static void __iomem *vpif_vidclkctl_reg; -static void __iomem *vpif_vsclkdis_reg; /* spin lock for updating above registers */ static spinlock_t vpif_reg_lock; @@ -441,14 +437,14 @@ static int set_vpif_clock(int mux_mode, int hd) int val = 0; int err = 0; - if (!vpif_vidclkctl_reg || !vpif_vsclkdis_reg || !cpld_client) + if (!cpld_client) return -ENXIO; /* disable the clock */ spin_lock_irqsave(&vpif_reg_lock, flags); - value = __raw_readl(vpif_vsclkdis_reg); + value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); value |= (VIDCH3CLK | VIDCH2CLK); - __raw_writel(value, vpif_vsclkdis_reg); + __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); spin_unlock_irqrestore(&vpif_reg_lock, flags); val = i2c_smbus_read_byte(cpld_client); @@ -464,7 +460,7 @@ static int set_vpif_clock(int mux_mode, int hd) if (err) return err; - value = __raw_readl(vpif_vidclkctl_reg); + value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL)); value &= ~(VCH2CLK_MASK); value &= ~(VCH3CLK_MASK); @@ -473,13 +469,13 @@ static int set_vpif_clock(int mux_mode, int hd) else value |= (VCH2CLK_AUXCLK | VCH3CLK_AUXCLK); - __raw_writel(value, vpif_vidclkctl_reg); + __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL)); spin_lock_irqsave(&vpif_reg_lock, flags); - value = __raw_readl(vpif_vsclkdis_reg); + value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); /* enable the clock */ value &= ~(VIDCH3CLK | VIDCH2CLK); - __raw_writel(value, vpif_vsclkdis_reg); + __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); spin_unlock_irqrestore(&vpif_reg_lock, flags); return 0; @@ -564,7 +560,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) int val; u32 value; - if (!vpif_vidclkctl_reg || !cpld_client) + if (!cpld_client) return -ENXIO; val = i2c_smbus_read_byte(cpld_client); @@ -572,7 +568,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) return val; spin_lock_irqsave(&vpif_reg_lock, flags); - value = __raw_readl(vpif_vidclkctl_reg); + value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL)); if (mux_mode) { val &= VPIF_INPUT_TWO_CHANNEL; value |= VIDCH1CLK; @@ -580,7 +576,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) val |= VPIF_INPUT_ONE_CHANNEL; value &= ~VIDCH1CLK; } - __raw_writel(value, vpif_vidclkctl_reg); + __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL)); spin_unlock_irqrestore(&vpif_reg_lock, flags); err = i2c_smbus_write_byte(cpld_client, val); @@ -674,12 +670,6 @@ static struct vpif_capture_config dm646x_vpif_capture_cfg = { static void __init evm_init_video(void) { - vpif_vidclkctl_reg = ioremap(VIDCLKCTL_OFFSET, 4); - vpif_vsclkdis_reg = ioremap(VSCLKDIS_OFFSET, 4); - if (!vpif_vidclkctl_reg || !vpif_vsclkdis_reg) { - pr_err("Can't map VPIF VIDCLKCTL or VSCLKDIS registers\n"); - return; - } spin_lock_init(&vpif_reg_lock); dm646x_setup_vpif(&dm646x_vpif_display_config, diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 8d34f513d415..a772bb45570a 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -30,7 +30,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/dm644x.h> #include <mach/common.h> #include <mach/i2c.h> #include <mach/serial.h> @@ -39,6 +38,8 @@ #include <mach/mmc.h> #include <mach/usb.h> +#include "davinci.h" + #define NEUROS_OSD2_PHY_ID "davinci_mdio-0:01" #define LXT971_PHY_ID 0x001378e2 #define LXT971_PHY_MASK 0xfffffff0 diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 31da3c5b2ba3..76e675096104 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -35,13 +35,14 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <mach/dm644x.h> #include <mach/common.h> #include <mach/i2c.h> #include <mach/serial.h> #include <mach/mux.h> #include <mach/usb.h> +#include "davinci.h" + #define SFFSDR_PHY_ID "davinci_mdio-0:01" static struct mtd_partition davinci_sffsdr_nandflash_partition[] = { /* U-Boot Environment: Block 0 diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h new file mode 100644 index 000000000000..9d708034b57f --- /dev/null +++ b/arch/arm/mach-davinci/davinci.h @@ -0,0 +1,96 @@ +/* + * This file contains the processor specific definitions + * of the TI DM644x, DM355, DM365, and DM646x. + * + * Copyright (C) 2011 Texas Instruments Incorporated + * Copyright (c) 2007 Deep Root Systems, LLC + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __DAVINCI_H +#define __DAVINCI_H + +#include <linux/clk.h> +#include <linux/videodev2.h> +#include <linux/davinci_emac.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> + +#include <mach/asp.h> +#include <mach/keyscan.h> +#include <mach/hardware.h> + +#include <media/davinci/vpfe_capture.h> +#include <media/davinci/vpif_types.h> + +#define DAVINCI_SYSTEM_MODULE_BASE 0x01c40000 +#define SYSMOD_VIDCLKCTL 0x38 +#define SYSMOD_VDD3P3VPWDN 0x48 +#define SYSMOD_VSCLKDIS 0x6c +#define SYSMOD_PUPDCTL1 0x7c + +extern void __iomem *davinci_sysmod_base; +#define DAVINCI_SYSMOD_VIRT(x) (davinci_sysmod_base + (x)) +void davinci_map_sysmod(void); + +/* DM355 base addresses */ +#define DM355_ASYNC_EMIF_CONTROL_BASE 0x01e10000 +#define DM355_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + +#define ASP1_TX_EVT_EN 1 +#define ASP1_RX_EVT_EN 2 + +/* DM365 base addresses */ +#define DM365_ASYNC_EMIF_CONTROL_BASE 0x01d10000 +#define DM365_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 +#define DM365_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 + +/* DM644x base addresses */ +#define DM644X_ASYNC_EMIF_CONTROL_BASE 0x01e00000 +#define DM644X_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 +#define DM644X_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 +#define DM644X_ASYNC_EMIF_DATA_CE2_BASE 0x06000000 +#define DM644X_ASYNC_EMIF_DATA_CE3_BASE 0x08000000 + +/* DM646x base addresses */ +#define DM646X_ASYNC_EMIF_CONTROL_BASE 0x20008000 +#define DM646X_ASYNC_EMIF_CS2_SPACE_BASE 0x42000000 + +/* DM355 function declarations */ +void __init dm355_init(void); +void dm355_init_spi0(unsigned chipselect_mask, + struct spi_board_info *info, unsigned len); +void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata); +void dm355_set_vpfe_config(struct vpfe_config *cfg); + +/* DM365 function declarations */ +void __init dm365_init(void); +void __init dm365_init_asp(struct snd_platform_data *pdata); +void __init dm365_init_vc(struct snd_platform_data *pdata); +void __init dm365_init_ks(struct davinci_ks_platform_data *pdata); +void __init dm365_init_rtc(void); +void dm365_init_spi0(unsigned chipselect_mask, + struct spi_board_info *info, unsigned len); +void dm365_set_vpfe_config(struct vpfe_config *cfg); + +/* DM644x function declarations */ +void __init dm644x_init(void); +void __init dm644x_init_asp(struct snd_platform_data *pdata); +int __init dm644x_init_video(struct vpfe_config *); + +/* DM646x function declarations */ +void __init dm646x_init(void); +void __init dm646x_init_mcasp0(struct snd_platform_data *pdata); +void __init dm646x_init_mcasp1(struct snd_platform_data *pdata); +int __init dm646x_init_edma(struct edma_rsv_info *rsv); +void dm646x_video_init(void); +void dm646x_setup_vpif(struct vpif_display_config *, + struct vpif_capture_config *); +#endif /*__DAVINCI_H */ diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 50c0156b4262..d2f9666284a7 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -23,6 +23,7 @@ #include <mach/mmc.h> #include <mach/time.h> +#include "davinci.h" #include "clock.h" #define DAVINCI_I2C_BASE 0x01C21000 @@ -33,8 +34,19 @@ #define DM365_MMCSD0_BASE 0x01D11000 #define DM365_MMCSD1_BASE 0x01D00000 -/* System control register offsets */ -#define DM64XX_VDD3P3V_PWDN 0x48 +void __iomem *davinci_sysmod_base; + +void davinci_map_sysmod(void) +{ + davinci_sysmod_base = ioremap_nocache(DAVINCI_SYSTEM_MODULE_BASE, + 0x800); + /* + * Throw a bug since a lot of board initialization code depends + * on system module availability. ioremap() failing this early + * need careful looking into anyway. + */ + BUG_ON(!davinci_sysmod_base); +} static struct resource i2c_resources[] = { { @@ -212,12 +224,12 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) davinci_cfg_reg(DM355_SD1_DATA2); davinci_cfg_reg(DM355_SD1_DATA3); } else if (cpu_is_davinci_dm365()) { - void __iomem *pupdctl1 = - IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE + 0x7c); - /* Configure pull down control */ - __raw_writel((__raw_readl(pupdctl1) & ~0xfc0), - pupdctl1); + unsigned v; + + v = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1)); + __raw_writel(v & ~0xfc0, + DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1)); mmcsd1_resources[0].start = DM365_MMCSD1_BASE; mmcsd1_resources[0].end = DM365_MMCSD1_BASE + @@ -246,11 +258,9 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) mmcsd0_resources[2].start = IRQ_DM365_SDIOINT0; } else if (cpu_is_davinci_dm644x()) { /* REVISIT: should this be in board-init code? */ - void __iomem *base = - IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); - /* Power-on 3.3V IO cells */ - __raw_writel(0, base + DM64XX_VDD3P3V_PWDN); + __raw_writel(0, + DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN)); /*Set up the pull regiter for MMC */ davinci_cfg_reg(DM644X_MSTK); } diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 19667cfc5de0..fd3d09aa6cde 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -18,7 +18,6 @@ #include <asm/mach/map.h> -#include <mach/dm355.h> #include <mach/cputype.h> #include <mach/edma.h> #include <mach/psc.h> @@ -31,6 +30,7 @@ #include <mach/spi.h> #include <mach/gpio-davinci.h> +#include "davinci.h" #include "clock.h" #include "mux.h" @@ -871,6 +871,7 @@ void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata) void __init dm355_init(void) { davinci_common_init(&davinci_soc_info_dm355); + davinci_map_sysmod(); } static int __init dm355_init_devices(void) diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index f15b435cc655..1a2e953082b3 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -21,7 +21,6 @@ #include <asm/mach/map.h> -#include <mach/dm365.h> #include <mach/cputype.h> #include <mach/edma.h> #include <mach/psc.h> @@ -35,11 +34,28 @@ #include <mach/spi.h> #include <mach/gpio-davinci.h> +#include "davinci.h" #include "clock.h" #include "mux.h" #define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */ +/* Base of key scan register bank */ +#define DM365_KEYSCAN_BASE 0x01c69400 + +#define DM365_RTC_BASE 0x01c69000 + +#define DAVINCI_DM365_VC_BASE 0x01d0c000 +#define DAVINCI_DMA_VC_TX 2 +#define DAVINCI_DMA_VC_RX 3 + +#define DM365_EMAC_BASE 0x01d07000 +#define DM365_EMAC_MDIO_BASE (DM365_EMAC_BASE + 0x4000) +#define DM365_EMAC_CNTRL_OFFSET 0x0000 +#define DM365_EMAC_CNTRL_MOD_OFFSET 0x3000 +#define DM365_EMAC_CNTRL_RAM_OFFSET 0x1000 +#define DM365_EMAC_CNTRL_RAM_SIZE 0x2000 + static struct pll_data pll1_data = { .num = 1, .phys_base = DAVINCI_PLL1_BASE, @@ -1122,6 +1138,7 @@ void __init dm365_init_rtc(void) void __init dm365_init(void) { davinci_common_init(&davinci_soc_info_dm365); + davinci_map_sysmod(); } static struct resource dm365_vpss_resources[] = { diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 43a48ee1917b..23e81cafba8d 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -15,7 +15,6 @@ #include <asm/mach/map.h> -#include <mach/dm644x.h> #include <mach/cputype.h> #include <mach/edma.h> #include <mach/irqs.h> @@ -27,6 +26,7 @@ #include <mach/asp.h> #include <mach/gpio-davinci.h> +#include "davinci.h" #include "clock.h" #include "mux.h" @@ -35,6 +35,13 @@ */ #define DM644X_REF_FREQ 27000000 +#define DM644X_EMAC_BASE 0x01c80000 +#define DM644X_EMAC_MDIO_BASE (DM644X_EMAC_BASE + 0x4000) +#define DM644X_EMAC_CNTRL_OFFSET 0x0000 +#define DM644X_EMAC_CNTRL_MOD_OFFSET 0x1000 +#define DM644X_EMAC_CNTRL_RAM_OFFSET 0x2000 +#define DM644X_EMAC_CNTRL_RAM_SIZE 0x2000 + static struct pll_data pll1_data = { .num = 1, .phys_base = DAVINCI_PLL1_BASE, @@ -587,13 +594,15 @@ static struct platform_device dm644x_asp_device = { .resource = dm644x_asp_resources, }; +#define DM644X_VPSS_BASE 0x01c73400 + static struct resource dm644x_vpss_resources[] = { { /* VPSS Base address */ .name = "vpss", - .start = 0x01c73400, - .end = 0x01c73400 + 0xff, - .flags = IORESOURCE_MEM, + .start = DM644X_VPSS_BASE, + .end = DM644X_VPSS_BASE + 0xff, + .flags = IORESOURCE_MEM, }, }; @@ -605,7 +614,7 @@ static struct platform_device dm644x_vpss_device = { .resource = dm644x_vpss_resources, }; -static struct resource vpfe_resources[] = { +static struct resource dm644x_vpfe_resources[] = { { .start = IRQ_VDINT0, .end = IRQ_VDINT0, @@ -639,22 +648,17 @@ static struct platform_device dm644x_ccdc_dev = { }, }; -static struct platform_device vpfe_capture_dev = { +static struct platform_device dm644x_vpfe_dev = { .name = CAPTURE_DRV_NAME, .id = -1, - .num_resources = ARRAY_SIZE(vpfe_resources), - .resource = vpfe_resources, + .num_resources = ARRAY_SIZE(dm644x_vpfe_resources), + .resource = dm644x_vpfe_resources, .dev = { .dma_mask = &vpfe_capture_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), }, }; -void dm644x_set_vpfe_config(struct vpfe_config *cfg) -{ - vpfe_capture_dev.dev.platform_data = cfg; -} - /*----------------------------------------------------------------------*/ static struct map_desc dm644x_io_desc[] = { @@ -779,16 +783,29 @@ void __init dm644x_init_asp(struct snd_platform_data *pdata) void __init dm644x_init(void) { davinci_common_init(&davinci_soc_info_dm644x); + davinci_map_sysmod(); } -static int __init dm644x_init_devices(void) +int __init dm644x_init_video(struct vpfe_config *vpfe_cfg) { - if (!cpu_is_davinci_dm644x()) - return 0; + dm644x_vpfe_dev.dev.platform_data = vpfe_cfg; /* Add ccdc clock aliases */ clk_add_alias("master", dm644x_ccdc_dev.name, "vpss_master", NULL); clk_add_alias("slave", dm644x_ccdc_dev.name, "vpss_slave", NULL); + + platform_device_register(&dm644x_vpss_device); + platform_device_register(&dm644x_ccdc_dev); + platform_device_register(&dm644x_vpfe_dev); + + return 0; +} + +static int __init dm644x_init_devices(void) +{ + if (!cpu_is_davinci_dm644x()) + return 0; + platform_device_register(&dm644x_edma_device); platform_device_register(&dm644x_mdio_device); @@ -796,10 +813,6 @@ static int __init dm644x_init_devices(void) clk_add_alias(NULL, dev_name(&dm644x_mdio_device.dev), NULL, &dm644x_emac_device.dev); - platform_device_register(&dm644x_vpss_device); - platform_device_register(&dm644x_ccdc_dev); - platform_device_register(&vpfe_capture_dev); - return 0; } postcore_initcall(dm644x_init_devices); diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 00f774394b16..9eb87c1d1edd 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -16,7 +16,6 @@ #include <asm/mach/map.h> -#include <mach/dm646x.h> #include <mach/cputype.h> #include <mach/edma.h> #include <mach/irqs.h> @@ -28,12 +27,11 @@ #include <mach/asp.h> #include <mach/gpio-davinci.h> +#include "davinci.h" #include "clock.h" #include "mux.h" #define DAVINCI_VPIF_BASE (0x01C12000) -#define VDD3P3V_PWDN_OFFSET (0x48) -#define VSCLKDIS_OFFSET (0x6C) #define VDD3P3V_VID_MASK (BIT_MASK(3) | BIT_MASK(2) | BIT_MASK(1) |\ BIT_MASK(0)) @@ -46,6 +44,13 @@ #define DM646X_REF_FREQ 27000000 #define DM646X_AUX_FREQ 24000000 +#define DM646X_EMAC_BASE 0x01c80000 +#define DM646X_EMAC_MDIO_BASE (DM646X_EMAC_BASE + 0x4000) +#define DM646X_EMAC_CNTRL_OFFSET 0x0000 +#define DM646X_EMAC_CNTRL_MOD_OFFSET 0x1000 +#define DM646X_EMAC_CNTRL_RAM_OFFSET 0x2000 +#define DM646X_EMAC_CNTRL_RAM_SIZE 0x2000 + static struct pll_data pll1_data = { .num = 1, .phys_base = DAVINCI_PLL1_BASE, @@ -873,15 +878,14 @@ void dm646x_setup_vpif(struct vpif_display_config *display_config, struct vpif_capture_config *capture_config) { unsigned int value; - void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); - value = __raw_readl(base + VSCLKDIS_OFFSET); + value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); value &= ~VSCLKDIS_MASK; - __raw_writel(value, base + VSCLKDIS_OFFSET); + __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); - value = __raw_readl(base + VDD3P3V_PWDN_OFFSET); + value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN)); value &= ~VDD3P3V_VID_MASK; - __raw_writel(value, base + VDD3P3V_PWDN_OFFSET); + __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN)); davinci_cfg_reg(DM646X_STSOMUX_DISABLE); davinci_cfg_reg(DM646X_STSIMUX_DISABLE); @@ -905,6 +909,7 @@ int __init dm646x_init_edma(struct edma_rsv_info *rsv) void __init dm646x_init(void) { davinci_common_init(&davinci_soc_info_dm646x); + davinci_map_sysmod(); } static int __init dm646x_init_devices(void) diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h deleted file mode 100644 index 36dff4a0ce3f..000000000000 --- a/arch/arm/mach-davinci/include/mach/dm355.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Chip specific defines for DM355 SoC - * - * Author: Kevin Hilman, Deep Root Systems, LLC - * - * 2007 (c) Deep Root Systems, LLC. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_DM355_H -#define __ASM_ARCH_DM355_H - -#include <mach/hardware.h> -#include <mach/asp.h> -#include <media/davinci/vpfe_capture.h> - -#define DM355_ASYNC_EMIF_CONTROL_BASE 0x01E10000 -#define DM355_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 - -#define ASP1_TX_EVT_EN 1 -#define ASP1_RX_EVT_EN 2 - -struct spi_board_info; - -void __init dm355_init(void); -void dm355_init_spi0(unsigned chipselect_mask, - struct spi_board_info *info, unsigned len); -void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata); -void dm355_set_vpfe_config(struct vpfe_config *cfg); - -#endif /* __ASM_ARCH_DM355_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h index 2563bf4e93a1..b9bf3d6a4423 100644 --- a/arch/arm/mach-davinci/include/mach/dm365.h +++ b/arch/arm/mach-davinci/include/mach/dm365.h @@ -1,52 +1 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __ASM_ARCH_DM365_H -#define __ASM_ARCH_DM665_H - -#include <linux/platform_device.h> -#include <linux/davinci_emac.h> -#include <mach/hardware.h> -#include <mach/asp.h> -#include <mach/keyscan.h> -#include <media/davinci/vpfe_capture.h> - -#define DM365_EMAC_BASE (0x01D07000) -#define DM365_EMAC_MDIO_BASE (DM365_EMAC_BASE + 0x4000) -#define DM365_EMAC_CNTRL_OFFSET (0x0000) -#define DM365_EMAC_CNTRL_MOD_OFFSET (0x3000) -#define DM365_EMAC_CNTRL_RAM_OFFSET (0x1000) -#define DM365_EMAC_CNTRL_RAM_SIZE (0x2000) - -/* Base of key scan register bank */ -#define DM365_KEYSCAN_BASE (0x01C69400) - -#define DM365_RTC_BASE (0x01C69000) - -#define DAVINCI_DM365_VC_BASE (0x01D0C000) -#define DAVINCI_DMA_VC_TX 2 -#define DAVINCI_DMA_VC_RX 3 - -#define DM365_ASYNC_EMIF_CONTROL_BASE 0x01D10000 -#define DM365_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 -#define DM365_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 - -void __init dm365_init(void); -void __init dm365_init_asp(struct snd_platform_data *pdata); -void __init dm365_init_vc(struct snd_platform_data *pdata); -void __init dm365_init_ks(struct davinci_ks_platform_data *pdata); -void __init dm365_init_rtc(void); -void dm365_init_spi0(unsigned chipselect_mask, - struct spi_board_info *info, unsigned len); - -void dm365_set_vpfe_config(struct vpfe_config *cfg); -#endif /* __ASM_ARCH_DM365_H */ +/* empty, remove once unused */ diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h deleted file mode 100644 index 5a1b26d4e68b..000000000000 --- a/arch/arm/mach-davinci/include/mach/dm644x.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file contains the processor specific definitions - * of the TI DM644x. - * - * Copyright (C) 2008 Texas Instruments. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#ifndef __ASM_ARCH_DM644X_H -#define __ASM_ARCH_DM644X_H - -#include <linux/davinci_emac.h> -#include <mach/hardware.h> -#include <mach/asp.h> -#include <media/davinci/vpfe_capture.h> - -#define DM644X_EMAC_BASE (0x01C80000) -#define DM644X_EMAC_MDIO_BASE (DM644X_EMAC_BASE + 0x4000) -#define DM644X_EMAC_CNTRL_OFFSET (0x0000) -#define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000) -#define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000) -#define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000) - -#define DM644X_ASYNC_EMIF_CONTROL_BASE 0x01E00000 -#define DM644X_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 -#define DM644X_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 -#define DM644X_ASYNC_EMIF_DATA_CE2_BASE 0x06000000 -#define DM644X_ASYNC_EMIF_DATA_CE3_BASE 0x08000000 - -void __init dm644x_init(void); -void __init dm644x_init_asp(struct snd_platform_data *pdata); -void dm644x_set_vpfe_config(struct vpfe_config *cfg); - -#endif /* __ASM_ARCH_DM644X_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h index a8ee6c9f0bb0..b9bf3d6a4423 100644 --- a/arch/arm/mach-davinci/include/mach/dm646x.h +++ b/arch/arm/mach-davinci/include/mach/dm646x.h @@ -1,41 +1 @@ -/* - * Chip specific defines for DM646x SoC - * - * Author: Kevin Hilman, Deep Root Systems, LLC - * - * 2007 (c) Deep Root Systems, LLC. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_DM646X_H -#define __ASM_ARCH_DM646X_H - -#include <mach/hardware.h> -#include <mach/asp.h> -#include <linux/i2c.h> -#include <linux/videodev2.h> -#include <linux/davinci_emac.h> -#include <media/davinci/vpif_types.h> - -#define DM646X_EMAC_BASE (0x01C80000) -#define DM646X_EMAC_MDIO_BASE (DM646X_EMAC_BASE + 0x4000) -#define DM646X_EMAC_CNTRL_OFFSET (0x0000) -#define DM646X_EMAC_CNTRL_MOD_OFFSET (0x1000) -#define DM646X_EMAC_CNTRL_RAM_OFFSET (0x2000) -#define DM646X_EMAC_CNTRL_RAM_SIZE (0x2000) - -#define DM646X_ASYNC_EMIF_CONTROL_BASE 0x20008000 -#define DM646X_ASYNC_EMIF_CS2_SPACE_BASE 0x42000000 - -void __init dm646x_init(void); -void __init dm646x_init_mcasp0(struct snd_platform_data *pdata); -void __init dm646x_init_mcasp1(struct snd_platform_data *pdata); -int __init dm646x_init_edma(struct edma_rsv_info *rsv); - -void dm646x_video_init(void); - -void dm646x_setup_vpif(struct vpif_display_config *, - struct vpif_capture_config *); - -#endif /* __ASM_ARCH_DM646X_H */ +/* empty, remove once unused */ diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h index 414e0b93e741..0209b1fc22a1 100644 --- a/arch/arm/mach-davinci/include/mach/hardware.h +++ b/arch/arm/mach-davinci/include/mach/hardware.h @@ -19,8 +19,6 @@ * and the chip/board init code should then explicitly include * <chipname>.h */ -#define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000 - /* * I/O mapping */ diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 574209d9e246..0dc51f9462de 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -8,6 +8,9 @@ obj- := obj-$(CONFIG_EP93XX_DMA) += dma.o +obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o +AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 + obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c index 681e939407d4..2d45947a3034 100644 --- a/arch/arm/mach-ep93xx/adssphere.c +++ b/arch/arm/mach-ep93xx/adssphere.c @@ -20,6 +20,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "soc.h" static struct ep93xx_eth_data __initdata adssphere_eth_data = { .phy_id = 1, diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index ca4de7105097..c95dbce2468e 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -25,6 +25,7 @@ #include <asm/div64.h> +#include "soc.h" struct clk { struct clk *parent; diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 41f0d680c5e1..8d2589588713 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -46,6 +46,7 @@ #include <asm/hardware/vic.h> +#include "soc.h" /************************************************************************* * Static I/O mappings that are needed for all EP93xx platforms @@ -204,7 +205,6 @@ void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg) spin_unlock_irqrestore(&syscon_swlock, flags); } -EXPORT_SYMBOL(ep93xx_syscon_swlocked_write); void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits) { @@ -221,7 +221,6 @@ void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits) spin_unlock_irqrestore(&syscon_swlock, flags); } -EXPORT_SYMBOL(ep93xx_devcfg_set_clear); /** * ep93xx_chip_revision() - returns the EP93xx chip revision @@ -648,9 +647,19 @@ static struct platform_device ep93xx_fb_device = { .resource = ep93xx_fb_resource, }; +/* The backlight use a single register in the framebuffer's register space */ +#define EP93XX_RASTER_REG_BRIGHTNESS 0x20 + +static struct resource ep93xx_bl_resources[] = { + DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE + + EP93XX_RASTER_REG_BRIGHTNESS, 0x04), +}; + static struct platform_device ep93xx_bl_device = { .name = "ep93xx-bl", .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_bl_resources), + .resource = ep93xx_bl_resources, }; /** @@ -845,11 +854,32 @@ void __init ep93xx_register_ac97(void) platform_device_register(&ep93xx_pcm_device); } +/************************************************************************* + * EP93xx Watchdog + *************************************************************************/ +static struct resource ep93xx_wdt_resources[] = { + DEFINE_RES_MEM(EP93XX_WATCHDOG_PHYS_BASE, 0x08), +}; + +static struct platform_device ep93xx_wdt_device = { + .name = "ep93xx-wdt", + .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_wdt_resources), + .resource = ep93xx_wdt_resources, +}; + void __init ep93xx_init_devices(void) { /* Disallow access to MaverickCrunch initially */ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA); + /* Default all ports to GPIO */ + ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | + EP93XX_SYSCON_DEVCFG_GONK | + EP93XX_SYSCON_DEVCFG_EONIDE | + EP93XX_SYSCON_DEVCFG_GONIDE | + EP93XX_SYSCON_DEVCFG_HONIDE); + /* Get the GPIO working early, other devices need it */ platform_device_register(&ep93xx_gpio_device); @@ -860,6 +890,7 @@ void __init ep93xx_init_devices(void) platform_device_register(&ep93xx_rtc_device); platform_device_register(&ep93xx_ohci_device); platform_device_register(&ep93xx_leds); + platform_device_register(&ep93xx_wdt_device); } void ep93xx_restart(char mode, const char *cmd) diff --git a/arch/arm/kernel/crunch-bits.S b/arch/arm/mach-ep93xx/crunch-bits.S index 0ec9bb48fab9..0ec9bb48fab9 100644 --- a/arch/arm/kernel/crunch-bits.S +++ b/arch/arm/mach-ep93xx/crunch-bits.S diff --git a/arch/arm/kernel/crunch.c b/arch/arm/mach-ep93xx/crunch.c index 25ef223ba7f3..74753e2df603 100644 --- a/arch/arm/kernel/crunch.c +++ b/arch/arm/mach-ep93xx/crunch.c @@ -16,9 +16,11 @@ #include <linux/sched.h> #include <linux/init.h> #include <linux/io.h> -#include <mach/ep93xx-regs.h> + #include <asm/thread_notify.h> +#include "soc.h" + struct crunch_state *crunch_owner; void crunch_task_release(struct thread_info *thread) diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c index 5a2570881255..16976d7bdc8a 100644 --- a/arch/arm/mach-ep93xx/dma.c +++ b/arch/arm/mach-ep93xx/dma.c @@ -28,6 +28,8 @@ #include <mach/dma.h> #include <mach/hardware.h> +#include "soc.h" + #define DMA_CHANNEL(_name, _base, _irq) \ { .name = (_name), .base = (_base), .irq = (_irq) } diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index d115653edca3..da9047d726f0 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -43,6 +43,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "soc.h" static void __init edb93xx_register_flash(void) { diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c index af46970dc58e..fcdffbe49dcc 100644 --- a/arch/arm/mach-ep93xx/gesbc9312.c +++ b/arch/arm/mach-ep93xx/gesbc9312.c @@ -20,6 +20,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "soc.h" static struct ep93xx_eth_data __initdata gesbc9312_eth_data = { .phy_id = 1, diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index c4a7b84ef06d..c64d74246602 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -6,40 +6,6 @@ #define __ASM_ARCH_EP93XX_REGS_H /* - * EP93xx Physical Memory Map: - * - * The ASDO pin is sampled at system reset to select a synchronous or - * asynchronous boot configuration. When ASDO is "1" (i.e. pulled-up) - * the synchronous boot mode is selected. When ASDO is "0" (i.e - * pulled-down) the asynchronous boot mode is selected. - * - * In synchronous boot mode nSDCE3 is decoded starting at physical address - * 0x00000000 and nCS0 is decoded starting at 0xf0000000. For asynchronous - * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3 - * decoded at 0xf0000000. - * - * There is known errata for the EP93xx dealing with External Memory - * Configurations. Please refer to "AN273: EP93xx Silicon Rev E Design - * Guidelines" for more information. This document can be found at: - * - * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf - */ - -#define EP93XX_CS0_PHYS_BASE_ASYNC 0x00000000 /* ASDO Pin = 0 */ -#define EP93XX_SDCE3_PHYS_BASE_SYNC 0x00000000 /* ASDO Pin = 1 */ -#define EP93XX_CS1_PHYS_BASE 0x10000000 -#define EP93XX_CS2_PHYS_BASE 0x20000000 -#define EP93XX_CS3_PHYS_BASE 0x30000000 -#define EP93XX_PCMCIA_PHYS_BASE 0x40000000 -#define EP93XX_CS6_PHYS_BASE 0x60000000 -#define EP93XX_CS7_PHYS_BASE 0x70000000 -#define EP93XX_SDCE0_PHYS_BASE 0xc0000000 -#define EP93XX_SDCE1_PHYS_BASE 0xd0000000 -#define EP93XX_SDCE2_PHYS_BASE 0xe0000000 -#define EP93XX_SDCE3_PHYS_BASE_ASYNC 0xf0000000 /* ASDO Pin = 0 */ -#define EP93XX_CS0_PHYS_BASE_SYNC 0xf0000000 /* ASDO Pin = 1 */ - -/* * EP93xx linux memory map: * * virt phys size @@ -62,58 +28,7 @@ #define EP93XX_APB_PHYS(x) (EP93XX_APB_PHYS_BASE + (x)) #define EP93XX_APB_IOMEM(x) IOMEM(EP93XX_APB_VIRT_BASE + (x)) - -/* AHB peripherals */ -#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000) - -#define EP93XX_ETHERNET_PHYS_BASE EP93XX_AHB_PHYS(0x00010000) -#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000) - -#define EP93XX_USB_PHYS_BASE EP93XX_AHB_PHYS(0x00020000) -#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000) - -#define EP93XX_RASTER_PHYS_BASE EP93XX_AHB_PHYS(0x00030000) -#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000) - -#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000) - -#define EP93XX_SDRAM_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00060000) - -#define EP93XX_PCMCIA_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00080000) - -#define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000) - -#define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000) - -#define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000) - -#define EP93XX_VIC2_BASE EP93XX_AHB_IOMEM(0x000c0000) - - -/* APB peripherals */ -#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000) - -#define EP93XX_I2S_PHYS_BASE EP93XX_APB_PHYS(0x00020000) -#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000) - -#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000) - -#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000) -#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000) -#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) -#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) -#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0) -#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc) -#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8) - -#define EP93XX_AAC_PHYS_BASE EP93XX_APB_PHYS(0x00080000) -#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000) - -#define EP93XX_SPI_PHYS_BASE EP93XX_APB_PHYS(0x000a0000) -#define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000) - -#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000) - +/* APB UARTs */ #define EP93XX_UART1_PHYS_BASE EP93XX_APB_PHYS(0x000c0000) #define EP93XX_UART1_BASE EP93XX_APB_IOMEM(0x000c0000) @@ -123,108 +38,4 @@ #define EP93XX_UART3_PHYS_BASE EP93XX_APB_PHYS(0x000e0000) #define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000) -#define EP93XX_KEY_MATRIX_PHYS_BASE EP93XX_APB_PHYS(0x000f0000) -#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000) - -#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000) -#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000) - -#define EP93XX_PWM_PHYS_BASE EP93XX_APB_PHYS(0x00110000) -#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000) - -#define EP93XX_RTC_PHYS_BASE EP93XX_APB_PHYS(0x00120000) -#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000) - -#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000) -#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x)) -#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00) -#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04) -#define EP93XX_SYSCON_PWRCNT_FIR_EN (1<<31) -#define EP93XX_SYSCON_PWRCNT_UARTBAUD (1<<29) -#define EP93XX_SYSCON_PWRCNT_USH_EN (1<<28) -#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 (1<<27) -#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 (1<<26) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 (1<<25) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 (1<<24) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 (1<<23) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 (1<<22) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 (1<<21) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 (1<<20) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 (1<<19) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 (1<<18) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 (1<<17) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 (1<<16) -#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08) -#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c) -#define EP93XX_SYSCON_CLKSET1 EP93XX_SYSCON_REG(0x20) -#define EP93XX_SYSCON_CLKSET1_NBYP1 (1<<23) -#define EP93XX_SYSCON_CLKSET2 EP93XX_SYSCON_REG(0x24) -#define EP93XX_SYSCON_CLKSET2_NBYP2 (1<<19) -#define EP93XX_SYSCON_CLKSET2_PLL2_EN (1<<18) -#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80) -#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31) -#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30) -#define EP93XX_SYSCON_DEVCFG_D0ONG (1<<29) -#define EP93XX_SYSCON_DEVCFG_IONU2 (1<<28) -#define EP93XX_SYSCON_DEVCFG_GONK (1<<27) -#define EP93XX_SYSCON_DEVCFG_TONG (1<<26) -#define EP93XX_SYSCON_DEVCFG_MONG (1<<25) -#define EP93XX_SYSCON_DEVCFG_U3EN (1<<24) -#define EP93XX_SYSCON_DEVCFG_CPENA (1<<23) -#define EP93XX_SYSCON_DEVCFG_A2ONG (1<<22) -#define EP93XX_SYSCON_DEVCFG_A1ONG (1<<21) -#define EP93XX_SYSCON_DEVCFG_U2EN (1<<20) -#define EP93XX_SYSCON_DEVCFG_EXVC (1<<19) -#define EP93XX_SYSCON_DEVCFG_U1EN (1<<18) -#define EP93XX_SYSCON_DEVCFG_TIN (1<<17) -#define EP93XX_SYSCON_DEVCFG_HC3IN (1<<15) -#define EP93XX_SYSCON_DEVCFG_HC3EN (1<<14) -#define EP93XX_SYSCON_DEVCFG_HC1IN (1<<13) -#define EP93XX_SYSCON_DEVCFG_HC1EN (1<<12) -#define EP93XX_SYSCON_DEVCFG_HONIDE (1<<11) -#define EP93XX_SYSCON_DEVCFG_GONIDE (1<<10) -#define EP93XX_SYSCON_DEVCFG_PONG (1<<9) -#define EP93XX_SYSCON_DEVCFG_EONIDE (1<<8) -#define EP93XX_SYSCON_DEVCFG_I2SONSSP (1<<7) -#define EP93XX_SYSCON_DEVCFG_I2SONAC97 (1<<6) -#define EP93XX_SYSCON_DEVCFG_RASONP3 (1<<4) -#define EP93XX_SYSCON_DEVCFG_RAS (1<<3) -#define EP93XX_SYSCON_DEVCFG_ADCPD (1<<2) -#define EP93XX_SYSCON_DEVCFG_KEYS (1<<1) -#define EP93XX_SYSCON_DEVCFG_SHENA (1<<0) -#define EP93XX_SYSCON_VIDCLKDIV EP93XX_SYSCON_REG(0x84) -#define EP93XX_SYSCON_CLKDIV_ENABLE (1<<15) -#define EP93XX_SYSCON_CLKDIV_ESEL (1<<14) -#define EP93XX_SYSCON_CLKDIV_PSEL (1<<13) -#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT 8 -#define EP93XX_SYSCON_I2SCLKDIV EP93XX_SYSCON_REG(0x8c) -#define EP93XX_SYSCON_I2SCLKDIV_SENA (1<<31) -#define EP93XX_SYSCON_I2SCLKDIV_ORIDE (1<<29) -#define EP93XX_SYSCON_I2SCLKDIV_SPOL (1<<19) -#define EP93XX_I2SCLKDIV_SDIV (1 << 16) -#define EP93XX_I2SCLKDIV_LRDIV32 (0 << 17) -#define EP93XX_I2SCLKDIV_LRDIV64 (1 << 17) -#define EP93XX_I2SCLKDIV_LRDIV128 (2 << 17) -#define EP93XX_I2SCLKDIV_LRDIV_MASK (3 << 17) -#define EP93XX_SYSCON_KEYTCHCLKDIV EP93XX_SYSCON_REG(0x90) -#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN (1<<31) -#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16) -#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN (1<<15) -#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0) -#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c) -#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000) -#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28) -#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8) -#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7) -#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6) -#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5) -#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4) -#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3) -#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1) -#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0) -#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) - -#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000) - - #endif diff --git a/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h b/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h index 8aff2ea35877..6d7c571a519f 100644 --- a/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h +++ b/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h @@ -3,6 +3,16 @@ #ifndef __GPIO_EP93XX_H #define __GPIO_EP93XX_H +#include <mach/ep93xx-regs.h> + +#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000) +#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000) +#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) +#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) +#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0) +#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc) +#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8) + /* GPIO port A. */ #define EP93XX_GPIO_LINE_A(x) ((x) + 0) #define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0) diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h index 4df842897eae..efcd47815a91 100644 --- a/arch/arm/mach-ep93xx/include/mach/hardware.h +++ b/arch/arm/mach-ep93xx/include/mach/hardware.h @@ -5,7 +5,6 @@ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H -#include <mach/ep93xx-regs.h> #include <mach/platform.h> /* diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index ad63d4be693f..602bd87fd0ab 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -21,20 +21,6 @@ struct ep93xx_eth_data void ep93xx_map_io(void); void ep93xx_init_irq(void); -/* EP93xx System Controller software locked register write */ -void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg); -void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits); - -static inline void ep93xx_devcfg_set_bits(unsigned int bits) -{ - ep93xx_devcfg_set_clear(bits, 0x00); -} - -static inline void ep93xx_devcfg_clear_bits(unsigned int bits) -{ - ep93xx_devcfg_set_clear(0x00, bits); -} - #define EP93XX_CHIP_REV_D0 3 #define EP93XX_CHIP_REV_D1 4 #define EP93XX_CHIP_REV_E0 5 diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index 7b98084f0c97..dc431c5f04ce 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -22,6 +22,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "soc.h" /************************************************************************* * Micro9 NOR Flash diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index f4e553eca21c..f40c2987e545 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -29,6 +29,8 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "soc.h" + static struct ep93xx_eth_data __initdata simone_eth_data = { .phy_id = 1, }; diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index fd846331ddff..0c00852ef160 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -35,6 +35,8 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "soc.h" + #define SNAPPERCL15_NAND_BASE (EP93XX_CS7_PHYS_BASE + SZ_16M) #define SNAPPERCL15_NAND_WPN (1 << 8) /* Write protect (active low) */ diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h new file mode 100644 index 000000000000..979fba722926 --- /dev/null +++ b/arch/arm/mach-ep93xx/soc.h @@ -0,0 +1,213 @@ +/* + * arch/arm/mach-ep93xx/soc.h + * + * Copyright (C) 2012 Open Kernel Labs <www.ok-labs.com> + * Copyright (C) 2012 Ryan Mallon <rmallon@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#ifndef _EP93XX_SOC_H +#define _EP93XX_SOC_H + +#include <mach/ep93xx-regs.h> + +/* + * EP93xx Physical Memory Map: + * + * The ASDO pin is sampled at system reset to select a synchronous or + * asynchronous boot configuration. When ASDO is "1" (i.e. pulled-up) + * the synchronous boot mode is selected. When ASDO is "0" (i.e + * pulled-down) the asynchronous boot mode is selected. + * + * In synchronous boot mode nSDCE3 is decoded starting at physical address + * 0x00000000 and nCS0 is decoded starting at 0xf0000000. For asynchronous + * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3 + * decoded at 0xf0000000. + * + * There is known errata for the EP93xx dealing with External Memory + * Configurations. Please refer to "AN273: EP93xx Silicon Rev E Design + * Guidelines" for more information. This document can be found at: + * + * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf + */ + +#define EP93XX_CS0_PHYS_BASE_ASYNC 0x00000000 /* ASDO Pin = 0 */ +#define EP93XX_SDCE3_PHYS_BASE_SYNC 0x00000000 /* ASDO Pin = 1 */ +#define EP93XX_CS1_PHYS_BASE 0x10000000 +#define EP93XX_CS2_PHYS_BASE 0x20000000 +#define EP93XX_CS3_PHYS_BASE 0x30000000 +#define EP93XX_PCMCIA_PHYS_BASE 0x40000000 +#define EP93XX_CS6_PHYS_BASE 0x60000000 +#define EP93XX_CS7_PHYS_BASE 0x70000000 +#define EP93XX_SDCE0_PHYS_BASE 0xc0000000 +#define EP93XX_SDCE1_PHYS_BASE 0xd0000000 +#define EP93XX_SDCE2_PHYS_BASE 0xe0000000 +#define EP93XX_SDCE3_PHYS_BASE_ASYNC 0xf0000000 /* ASDO Pin = 0 */ +#define EP93XX_CS0_PHYS_BASE_SYNC 0xf0000000 /* ASDO Pin = 1 */ + +/* AHB peripherals */ +#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000) + +#define EP93XX_ETHERNET_PHYS_BASE EP93XX_AHB_PHYS(0x00010000) +#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000) + +#define EP93XX_USB_PHYS_BASE EP93XX_AHB_PHYS(0x00020000) +#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000) + +#define EP93XX_RASTER_PHYS_BASE EP93XX_AHB_PHYS(0x00030000) +#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000) + +#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000) + +#define EP93XX_SDRAM_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00060000) + +#define EP93XX_PCMCIA_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00080000) + +#define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000) + +#define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000) + +#define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000) + +#define EP93XX_VIC2_BASE EP93XX_AHB_IOMEM(0x000c0000) + +/* APB peripherals */ +#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000) + +#define EP93XX_I2S_PHYS_BASE EP93XX_APB_PHYS(0x00020000) +#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000) + +#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000) + +#define EP93XX_AAC_PHYS_BASE EP93XX_APB_PHYS(0x00080000) +#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000) + +#define EP93XX_SPI_PHYS_BASE EP93XX_APB_PHYS(0x000a0000) +#define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000) + +#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000) + +#define EP93XX_KEY_MATRIX_PHYS_BASE EP93XX_APB_PHYS(0x000f0000) +#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000) + +#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000) +#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000) + +#define EP93XX_PWM_PHYS_BASE EP93XX_APB_PHYS(0x00110000) +#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000) + +#define EP93XX_RTC_PHYS_BASE EP93XX_APB_PHYS(0x00120000) +#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000) + +#define EP93XX_WATCHDOG_PHYS_BASE EP93XX_APB_PHYS(0x00140000) +#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000) + +/* System controller */ +#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000) +#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x)) +#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00) +#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04) +#define EP93XX_SYSCON_PWRCNT_FIR_EN (1<<31) +#define EP93XX_SYSCON_PWRCNT_UARTBAUD (1<<29) +#define EP93XX_SYSCON_PWRCNT_USH_EN (1<<28) +#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 (1<<27) +#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 (1<<26) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 (1<<25) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 (1<<24) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 (1<<23) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 (1<<22) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 (1<<21) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 (1<<20) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 (1<<19) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 (1<<18) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 (1<<17) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 (1<<16) +#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08) +#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c) +#define EP93XX_SYSCON_CLKSET1 EP93XX_SYSCON_REG(0x20) +#define EP93XX_SYSCON_CLKSET1_NBYP1 (1<<23) +#define EP93XX_SYSCON_CLKSET2 EP93XX_SYSCON_REG(0x24) +#define EP93XX_SYSCON_CLKSET2_NBYP2 (1<<19) +#define EP93XX_SYSCON_CLKSET2_PLL2_EN (1<<18) +#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80) +#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31) +#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30) +#define EP93XX_SYSCON_DEVCFG_D0ONG (1<<29) +#define EP93XX_SYSCON_DEVCFG_IONU2 (1<<28) +#define EP93XX_SYSCON_DEVCFG_GONK (1<<27) +#define EP93XX_SYSCON_DEVCFG_TONG (1<<26) +#define EP93XX_SYSCON_DEVCFG_MONG (1<<25) +#define EP93XX_SYSCON_DEVCFG_U3EN (1<<24) +#define EP93XX_SYSCON_DEVCFG_CPENA (1<<23) +#define EP93XX_SYSCON_DEVCFG_A2ONG (1<<22) +#define EP93XX_SYSCON_DEVCFG_A1ONG (1<<21) +#define EP93XX_SYSCON_DEVCFG_U2EN (1<<20) +#define EP93XX_SYSCON_DEVCFG_EXVC (1<<19) +#define EP93XX_SYSCON_DEVCFG_U1EN (1<<18) +#define EP93XX_SYSCON_DEVCFG_TIN (1<<17) +#define EP93XX_SYSCON_DEVCFG_HC3IN (1<<15) +#define EP93XX_SYSCON_DEVCFG_HC3EN (1<<14) +#define EP93XX_SYSCON_DEVCFG_HC1IN (1<<13) +#define EP93XX_SYSCON_DEVCFG_HC1EN (1<<12) +#define EP93XX_SYSCON_DEVCFG_HONIDE (1<<11) +#define EP93XX_SYSCON_DEVCFG_GONIDE (1<<10) +#define EP93XX_SYSCON_DEVCFG_PONG (1<<9) +#define EP93XX_SYSCON_DEVCFG_EONIDE (1<<8) +#define EP93XX_SYSCON_DEVCFG_I2SONSSP (1<<7) +#define EP93XX_SYSCON_DEVCFG_I2SONAC97 (1<<6) +#define EP93XX_SYSCON_DEVCFG_RASONP3 (1<<4) +#define EP93XX_SYSCON_DEVCFG_RAS (1<<3) +#define EP93XX_SYSCON_DEVCFG_ADCPD (1<<2) +#define EP93XX_SYSCON_DEVCFG_KEYS (1<<1) +#define EP93XX_SYSCON_DEVCFG_SHENA (1<<0) +#define EP93XX_SYSCON_VIDCLKDIV EP93XX_SYSCON_REG(0x84) +#define EP93XX_SYSCON_CLKDIV_ENABLE (1<<15) +#define EP93XX_SYSCON_CLKDIV_ESEL (1<<14) +#define EP93XX_SYSCON_CLKDIV_PSEL (1<<13) +#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT 8 +#define EP93XX_SYSCON_I2SCLKDIV EP93XX_SYSCON_REG(0x8c) +#define EP93XX_SYSCON_I2SCLKDIV_SENA (1<<31) +#define EP93XX_SYSCON_I2SCLKDIV_ORIDE (1<<29) +#define EP93XX_SYSCON_I2SCLKDIV_SPOL (1<<19) +#define EP93XX_I2SCLKDIV_SDIV (1 << 16) +#define EP93XX_I2SCLKDIV_LRDIV32 (0 << 17) +#define EP93XX_I2SCLKDIV_LRDIV64 (1 << 17) +#define EP93XX_I2SCLKDIV_LRDIV128 (2 << 17) +#define EP93XX_I2SCLKDIV_LRDIV_MASK (3 << 17) +#define EP93XX_SYSCON_KEYTCHCLKDIV EP93XX_SYSCON_REG(0x90) +#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN (1<<31) +#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16) +#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN (1<<15) +#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0) +#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c) +#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000) +#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28) +#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8) +#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7) +#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6) +#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5) +#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4) +#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3) +#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1) +#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0) +#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) + +/* EP93xx System Controller software locked register write */ +void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg); +void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits); + +static inline void ep93xx_devcfg_set_bits(unsigned int bits) +{ + ep93xx_devcfg_set_clear(bits, 0x00); +} + +static inline void ep93xx_devcfg_clear_bits(unsigned int bits) +{ + ep93xx_devcfg_set_clear(0x00, bits); +} + +#endif /* _EP93XX_SOC_H */ diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 79f8ecf07a19..5ea790942e94 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -28,6 +28,7 @@ #include <asm/mach/map.h> #include <asm/mach/arch.h> +#include "soc.h" static struct map_desc ts72xx_io_desc[] __initdata = { { diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index d67d0b4feb6f..ba156eb225e8 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -39,6 +39,8 @@ #include <asm/mach/map.h> #include <asm/mach/arch.h> +#include "soc.h" + /************************************************************************* * Static I/O mappings for the FPGA *************************************************************************/ diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index d9191f9a7af8..9a4c09896509 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -12,7 +12,8 @@ obj- := # Core -obj-$(CONFIG_ARCH_EXYNOS4) += common.o clock.o +obj-$(CONFIG_ARCH_EXYNOS) += common.o +obj-$(CONFIG_ARCH_EXYNOS4) += clock-exynos4.o obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c new file mode 100644 index 000000000000..31b59e65463a --- /dev/null +++ b/arch/arm/mach-exynos/clock-exynos4.c @@ -0,0 +1,1563 @@ +/* + * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/syscore_ops.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/pm.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/sysmmu.h> + +#include "common.h" +#include "clock-exynos4.h" + +#ifdef CONFIG_PM_SLEEP +static struct sleep_save exynos4_clock_save[] = { + SAVE_ITEM(EXYNOS4_CLKDIV_LEFTBUS), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_LEFTBUS), + SAVE_ITEM(EXYNOS4_CLKDIV_RIGHTBUS), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_RIGHTBUS), + SAVE_ITEM(EXYNOS4_CLKSRC_TOP0), + SAVE_ITEM(EXYNOS4_CLKSRC_TOP1), + SAVE_ITEM(EXYNOS4_CLKSRC_CAM), + SAVE_ITEM(EXYNOS4_CLKSRC_TV), + SAVE_ITEM(EXYNOS4_CLKSRC_MFC), + SAVE_ITEM(EXYNOS4_CLKSRC_G3D), + SAVE_ITEM(EXYNOS4_CLKSRC_LCD0), + SAVE_ITEM(EXYNOS4_CLKSRC_MAUDIO), + SAVE_ITEM(EXYNOS4_CLKSRC_FSYS), + SAVE_ITEM(EXYNOS4_CLKSRC_PERIL0), + SAVE_ITEM(EXYNOS4_CLKSRC_PERIL1), + SAVE_ITEM(EXYNOS4_CLKDIV_CAM), + SAVE_ITEM(EXYNOS4_CLKDIV_TV), + SAVE_ITEM(EXYNOS4_CLKDIV_MFC), + SAVE_ITEM(EXYNOS4_CLKDIV_G3D), + SAVE_ITEM(EXYNOS4_CLKDIV_LCD0), + SAVE_ITEM(EXYNOS4_CLKDIV_MAUDIO), + SAVE_ITEM(EXYNOS4_CLKDIV_FSYS0), + SAVE_ITEM(EXYNOS4_CLKDIV_FSYS1), + SAVE_ITEM(EXYNOS4_CLKDIV_FSYS2), + SAVE_ITEM(EXYNOS4_CLKDIV_FSYS3), + SAVE_ITEM(EXYNOS4_CLKDIV_PERIL0), + SAVE_ITEM(EXYNOS4_CLKDIV_PERIL1), + SAVE_ITEM(EXYNOS4_CLKDIV_PERIL2), + SAVE_ITEM(EXYNOS4_CLKDIV_PERIL3), + SAVE_ITEM(EXYNOS4_CLKDIV_PERIL4), + SAVE_ITEM(EXYNOS4_CLKDIV_PERIL5), + SAVE_ITEM(EXYNOS4_CLKDIV_TOP), + SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TOP), + SAVE_ITEM(EXYNOS4_CLKSRC_MASK_CAM), + SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TV), + SAVE_ITEM(EXYNOS4_CLKSRC_MASK_LCD0), + SAVE_ITEM(EXYNOS4_CLKSRC_MASK_MAUDIO), + SAVE_ITEM(EXYNOS4_CLKSRC_MASK_FSYS), + SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL0), + SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL1), + SAVE_ITEM(EXYNOS4_CLKDIV2_RATIO), + SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCAM), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_CAM), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_TV), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_MFC), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_G3D), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_LCD0), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_FSYS), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_GPS), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_PERIL), + SAVE_ITEM(EXYNOS4_CLKGATE_BLOCK), + SAVE_ITEM(EXYNOS4_CLKSRC_MASK_DMC), + SAVE_ITEM(EXYNOS4_CLKSRC_DMC), + SAVE_ITEM(EXYNOS4_CLKDIV_DMC0), + SAVE_ITEM(EXYNOS4_CLKDIV_DMC1), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_DMC), + SAVE_ITEM(EXYNOS4_CLKSRC_CPU), + SAVE_ITEM(EXYNOS4_CLKDIV_CPU), + SAVE_ITEM(EXYNOS4_CLKDIV_CPU + 0x4), + SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCPU), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_CPU), +}; +#endif + +static struct clk exynos4_clk_sclk_hdmi27m = { + .name = "sclk_hdmi27m", + .rate = 27000000, +}; + +static struct clk exynos4_clk_sclk_hdmiphy = { + .name = "sclk_hdmiphy", +}; + +static struct clk exynos4_clk_sclk_usbphy0 = { + .name = "sclk_usbphy0", + .rate = 27000000, +}; + +static struct clk exynos4_clk_sclk_usbphy1 = { + .name = "sclk_usbphy1", +}; + +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .id = -1, +}; + +static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TOP, clk, enable); +} + +static int exynos4_clksrc_mask_cam_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_CAM, clk, enable); +} + +static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_LCD0, clk, enable); +} + +int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_FSYS, clk, enable); +} + +static int exynos4_clksrc_mask_peril0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL0, clk, enable); +} + +static int exynos4_clksrc_mask_peril1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL1, clk, enable); +} + +static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKGATE_IP_MFC, clk, enable); +} + +static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TV, clk, enable); +} + +static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKGATE_IP_CAM, clk, enable); +} + +static int exynos4_clk_ip_tv_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKGATE_IP_TV, clk, enable); +} + +static int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKGATE_IP_IMAGE, clk, enable); +} + +static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKGATE_IP_LCD0, clk, enable); +} + +int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4210_CLKGATE_IP_LCD1, clk, enable); +} + +int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKGATE_IP_FSYS, clk, enable); +} + +static int exynos4_clk_ip_peril_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIL, clk, enable); +} + +static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIR, clk, enable); +} + +static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); +} + +static int exynos4_clk_dac_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable); +} + +/* Core list of CMU_CPU side */ + +static struct clksrc_clk exynos4_clk_mout_apll = { + .clk = { + .name = "mout_apll", + }, + .sources = &clk_src_apll, + .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 0, .size = 1 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_apll = { + .clk = { + .name = "sclk_apll", + .parent = &exynos4_clk_mout_apll.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 24, .size = 3 }, +}; + +static struct clksrc_clk exynos4_clk_mout_epll = { + .clk = { + .name = "mout_epll", + }, + .sources = &clk_src_epll, + .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 4, .size = 1 }, +}; + +struct clksrc_clk exynos4_clk_mout_mpll = { + .clk = { + .name = "mout_mpll", + }, + .sources = &clk_src_mpll, + + /* reg_src will be added in each SoCs' clock */ +}; + +static struct clk *exynos4_clkset_moutcore_list[] = { + [0] = &exynos4_clk_mout_apll.clk, + [1] = &exynos4_clk_mout_mpll.clk, +}; + +static struct clksrc_sources exynos4_clkset_moutcore = { + .sources = exynos4_clkset_moutcore_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_moutcore_list), +}; + +static struct clksrc_clk exynos4_clk_moutcore = { + .clk = { + .name = "moutcore", + }, + .sources = &exynos4_clkset_moutcore, + .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 16, .size = 1 }, +}; + +static struct clksrc_clk exynos4_clk_coreclk = { + .clk = { + .name = "core_clk", + .parent = &exynos4_clk_moutcore.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 0, .size = 3 }, +}; + +static struct clksrc_clk exynos4_clk_armclk = { + .clk = { + .name = "armclk", + .parent = &exynos4_clk_coreclk.clk, + }, +}; + +static struct clksrc_clk exynos4_clk_aclk_corem0 = { + .clk = { + .name = "aclk_corem0", + .parent = &exynos4_clk_coreclk.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 }, +}; + +static struct clksrc_clk exynos4_clk_aclk_cores = { + .clk = { + .name = "aclk_cores", + .parent = &exynos4_clk_coreclk.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 }, +}; + +static struct clksrc_clk exynos4_clk_aclk_corem1 = { + .clk = { + .name = "aclk_corem1", + .parent = &exynos4_clk_coreclk.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 8, .size = 3 }, +}; + +static struct clksrc_clk exynos4_clk_periphclk = { + .clk = { + .name = "periphclk", + .parent = &exynos4_clk_coreclk.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 12, .size = 3 }, +}; + +/* Core list of CMU_CORE side */ + +static struct clk *exynos4_clkset_corebus_list[] = { + [0] = &exynos4_clk_mout_mpll.clk, + [1] = &exynos4_clk_sclk_apll.clk, +}; + +struct clksrc_sources exynos4_clkset_mout_corebus = { + .sources = exynos4_clkset_corebus_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_corebus_list), +}; + +static struct clksrc_clk exynos4_clk_mout_corebus = { + .clk = { + .name = "mout_corebus", + }, + .sources = &exynos4_clkset_mout_corebus, + .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 4, .size = 1 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_dmc = { + .clk = { + .name = "sclk_dmc", + .parent = &exynos4_clk_mout_corebus.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 12, .size = 3 }, +}; + +static struct clksrc_clk exynos4_clk_aclk_cored = { + .clk = { + .name = "aclk_cored", + .parent = &exynos4_clk_sclk_dmc.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 16, .size = 3 }, +}; + +static struct clksrc_clk exynos4_clk_aclk_corep = { + .clk = { + .name = "aclk_corep", + .parent = &exynos4_clk_aclk_cored.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 20, .size = 3 }, +}; + +static struct clksrc_clk exynos4_clk_aclk_acp = { + .clk = { + .name = "aclk_acp", + .parent = &exynos4_clk_mout_corebus.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 0, .size = 3 }, +}; + +static struct clksrc_clk exynos4_clk_pclk_acp = { + .clk = { + .name = "pclk_acp", + .parent = &exynos4_clk_aclk_acp.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 4, .size = 3 }, +}; + +/* Core list of CMU_TOP side */ + +struct clk *exynos4_clkset_aclk_top_list[] = { + [0] = &exynos4_clk_mout_mpll.clk, + [1] = &exynos4_clk_sclk_apll.clk, +}; + +static struct clksrc_sources exynos4_clkset_aclk = { + .sources = exynos4_clkset_aclk_top_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_aclk_top_list), +}; + +static struct clksrc_clk exynos4_clk_aclk_200 = { + .clk = { + .name = "aclk_200", + }, + .sources = &exynos4_clkset_aclk, + .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 12, .size = 1 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 0, .size = 3 }, +}; + +static struct clksrc_clk exynos4_clk_aclk_100 = { + .clk = { + .name = "aclk_100", + }, + .sources = &exynos4_clkset_aclk, + .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 16, .size = 1 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 4, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_aclk_160 = { + .clk = { + .name = "aclk_160", + }, + .sources = &exynos4_clkset_aclk, + .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 20, .size = 1 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 8, .size = 3 }, +}; + +struct clksrc_clk exynos4_clk_aclk_133 = { + .clk = { + .name = "aclk_133", + }, + .sources = &exynos4_clkset_aclk, + .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 24, .size = 1 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 12, .size = 3 }, +}; + +static struct clk *exynos4_clkset_vpllsrc_list[] = { + [0] = &clk_fin_vpll, + [1] = &exynos4_clk_sclk_hdmi27m, +}; + +static struct clksrc_sources exynos4_clkset_vpllsrc = { + .sources = exynos4_clkset_vpllsrc_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_vpllsrc_list), +}; + +static struct clksrc_clk exynos4_clk_vpllsrc = { + .clk = { + .name = "vpll_src", + .enable = exynos4_clksrc_mask_top_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &exynos4_clkset_vpllsrc, + .reg_src = { .reg = EXYNOS4_CLKSRC_TOP1, .shift = 0, .size = 1 }, +}; + +static struct clk *exynos4_clkset_sclk_vpll_list[] = { + [0] = &exynos4_clk_vpllsrc.clk, + [1] = &clk_fout_vpll, +}; + +static struct clksrc_sources exynos4_clkset_sclk_vpll = { + .sources = exynos4_clkset_sclk_vpll_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_vpll_list), +}; + +static struct clksrc_clk exynos4_clk_sclk_vpll = { + .clk = { + .name = "sclk_vpll", + }, + .sources = &exynos4_clkset_sclk_vpll, + .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 8, .size = 1 }, +}; + +static struct clk exynos4_init_clocks_off[] = { + { + .name = "timers", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1<<24), + }, { + .name = "csis", + .devname = "s5p-mipi-csis.0", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "csis", + .devname = "s5p-mipi-csis.1", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "fimc", + .devname = "exynos4-fimc.0", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "fimc", + .devname = "exynos4-fimc.1", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "fimc", + .devname = "exynos4-fimc.2", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "fimc", + .devname = "exynos4-fimc.3", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "fimd", + .devname = "exynos4-fb.0", + .enable = exynos4_clk_ip_lcd0_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "hsmmc", + .devname = "s3c-sdhci.0", + .parent = &exynos4_clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "hsmmc", + .devname = "s3c-sdhci.1", + .parent = &exynos4_clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 6), + }, { + .name = "hsmmc", + .devname = "s3c-sdhci.2", + .parent = &exynos4_clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "hsmmc", + .devname = "s3c-sdhci.3", + .parent = &exynos4_clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "dwmmc", + .parent = &exynos4_clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 9), + }, { + .name = "dac", + .devname = "s5p-sdo", + .enable = exynos4_clk_ip_tv_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "mixer", + .devname = "s5p-mixer", + .enable = exynos4_clk_ip_tv_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "vp", + .devname = "s5p-mixer", + .enable = exynos4_clk_ip_tv_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "hdmi", + .devname = "exynos4-hdmi", + .enable = exynos4_clk_ip_tv_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "hdmiphy", + .devname = "exynos4-hdmi", + .enable = exynos4_clk_hdmiphy_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "dacphy", + .devname = "s5p-sdo", + .enable = exynos4_clk_dac_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "adc", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 15), + }, { + .name = "keypad", + .enable = exynos4_clk_ip_perir_ctrl, + .ctrlbit = (1 << 16), + }, { + .name = "rtc", + .enable = exynos4_clk_ip_perir_ctrl, + .ctrlbit = (1 << 15), + }, { + .name = "watchdog", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_perir_ctrl, + .ctrlbit = (1 << 14), + }, { + .name = "usbhost", + .enable = exynos4_clk_ip_fsys_ctrl , + .ctrlbit = (1 << 12), + }, { + .name = "otg", + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 13), + }, { + .name = "spi", + .devname = "s3c64xx-spi.0", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 16), + }, { + .name = "spi", + .devname = "s3c64xx-spi.1", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "spi", + .devname = "s3c64xx-spi.2", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 18), + }, { + .name = "iis", + .devname = "samsung-i2s.0", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 19), + }, { + .name = "iis", + .devname = "samsung-i2s.1", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 20), + }, { + .name = "iis", + .devname = "samsung-i2s.2", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "ac97", + .devname = "samsung-ac97", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 27), + }, { + .name = "fimg2d", + .enable = exynos4_clk_ip_image_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "mfc", + .devname = "s5p-mfc", + .enable = exynos4_clk_ip_mfc_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.0", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 6), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.1", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.2", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.3", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 9), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.4", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.5", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 11), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.6", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.7", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 13), + }, { + .name = "i2c", + .devname = "s3c2440-hdmiphy-i2c", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 14), + }, { + .name = "SYSMMU_MDMA", + .enable = exynos4_clk_ip_image_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "SYSMMU_FIMC0", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "SYSMMU_FIMC1", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "SYSMMU_FIMC2", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 9), + }, { + .name = "SYSMMU_FIMC3", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "SYSMMU_JPEG", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 11), + }, { + .name = "SYSMMU_FIMD0", + .enable = exynos4_clk_ip_lcd0_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "SYSMMU_FIMD1", + .enable = exynos4_clk_ip_lcd1_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "SYSMMU_PCIe", + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 18), + }, { + .name = "SYSMMU_G2D", + .enable = exynos4_clk_ip_image_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "SYSMMU_ROTATOR", + .enable = exynos4_clk_ip_image_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "SYSMMU_TV", + .enable = exynos4_clk_ip_tv_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "SYSMMU_MFC_L", + .enable = exynos4_clk_ip_mfc_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "SYSMMU_MFC_R", + .enable = exynos4_clk_ip_mfc_ctrl, + .ctrlbit = (1 << 2), + } +}; + +static struct clk exynos4_init_clocks_on[] = { + { + .name = "uart", + .devname = "s5pv210-uart.0", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "uart", + .devname = "s5pv210-uart.1", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "uart", + .devname = "s5pv210-uart.2", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "uart", + .devname = "s5pv210-uart.3", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "uart", + .devname = "s5pv210-uart.4", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "uart", + .devname = "s5pv210-uart.5", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 5), + } +}; + +static struct clk exynos4_clk_pdma0 = { + .name = "dma", + .devname = "dma-pl330.0", + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 0), +}; + +static struct clk exynos4_clk_pdma1 = { + .name = "dma", + .devname = "dma-pl330.1", + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 1), +}; + +struct clk *exynos4_clkset_group_list[] = { + [0] = &clk_ext_xtal_mux, + [1] = &clk_xusbxti, + [2] = &exynos4_clk_sclk_hdmi27m, + [3] = &exynos4_clk_sclk_usbphy0, + [4] = &exynos4_clk_sclk_usbphy1, + [5] = &exynos4_clk_sclk_hdmiphy, + [6] = &exynos4_clk_mout_mpll.clk, + [7] = &exynos4_clk_mout_epll.clk, + [8] = &exynos4_clk_sclk_vpll.clk, +}; + +struct clksrc_sources exynos4_clkset_group = { + .sources = exynos4_clkset_group_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_group_list), +}; + +static struct clk *exynos4_clkset_mout_g2d0_list[] = { + [0] = &exynos4_clk_mout_mpll.clk, + [1] = &exynos4_clk_sclk_apll.clk, +}; + +static struct clksrc_sources exynos4_clkset_mout_g2d0 = { + .sources = exynos4_clkset_mout_g2d0_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d0_list), +}; + +static struct clksrc_clk exynos4_clk_mout_g2d0 = { + .clk = { + .name = "mout_g2d0", + }, + .sources = &exynos4_clkset_mout_g2d0, + .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 0, .size = 1 }, +}; + +static struct clk *exynos4_clkset_mout_g2d1_list[] = { + [0] = &exynos4_clk_mout_epll.clk, + [1] = &exynos4_clk_sclk_vpll.clk, +}; + +static struct clksrc_sources exynos4_clkset_mout_g2d1 = { + .sources = exynos4_clkset_mout_g2d1_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d1_list), +}; + +static struct clksrc_clk exynos4_clk_mout_g2d1 = { + .clk = { + .name = "mout_g2d1", + }, + .sources = &exynos4_clkset_mout_g2d1, + .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 4, .size = 1 }, +}; + +static struct clk *exynos4_clkset_mout_g2d_list[] = { + [0] = &exynos4_clk_mout_g2d0.clk, + [1] = &exynos4_clk_mout_g2d1.clk, +}; + +static struct clksrc_sources exynos4_clkset_mout_g2d = { + .sources = exynos4_clkset_mout_g2d_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d_list), +}; + +static struct clk *exynos4_clkset_mout_mfc0_list[] = { + [0] = &exynos4_clk_mout_mpll.clk, + [1] = &exynos4_clk_sclk_apll.clk, +}; + +static struct clksrc_sources exynos4_clkset_mout_mfc0 = { + .sources = exynos4_clkset_mout_mfc0_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc0_list), +}; + +static struct clksrc_clk exynos4_clk_mout_mfc0 = { + .clk = { + .name = "mout_mfc0", + }, + .sources = &exynos4_clkset_mout_mfc0, + .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 0, .size = 1 }, +}; + +static struct clk *exynos4_clkset_mout_mfc1_list[] = { + [0] = &exynos4_clk_mout_epll.clk, + [1] = &exynos4_clk_sclk_vpll.clk, +}; + +static struct clksrc_sources exynos4_clkset_mout_mfc1 = { + .sources = exynos4_clkset_mout_mfc1_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc1_list), +}; + +static struct clksrc_clk exynos4_clk_mout_mfc1 = { + .clk = { + .name = "mout_mfc1", + }, + .sources = &exynos4_clkset_mout_mfc1, + .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 4, .size = 1 }, +}; + +static struct clk *exynos4_clkset_mout_mfc_list[] = { + [0] = &exynos4_clk_mout_mfc0.clk, + [1] = &exynos4_clk_mout_mfc1.clk, +}; + +static struct clksrc_sources exynos4_clkset_mout_mfc = { + .sources = exynos4_clkset_mout_mfc_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc_list), +}; + +static struct clk *exynos4_clkset_sclk_dac_list[] = { + [0] = &exynos4_clk_sclk_vpll.clk, + [1] = &exynos4_clk_sclk_hdmiphy, +}; + +static struct clksrc_sources exynos4_clkset_sclk_dac = { + .sources = exynos4_clkset_sclk_dac_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_dac_list), +}; + +static struct clksrc_clk exynos4_clk_sclk_dac = { + .clk = { + .name = "sclk_dac", + .enable = exynos4_clksrc_mask_tv_ctrl, + .ctrlbit = (1 << 8), + }, + .sources = &exynos4_clkset_sclk_dac, + .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 8, .size = 1 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_pixel = { + .clk = { + .name = "sclk_pixel", + .parent = &exynos4_clk_sclk_vpll.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_TV, .shift = 0, .size = 4 }, +}; + +static struct clk *exynos4_clkset_sclk_hdmi_list[] = { + [0] = &exynos4_clk_sclk_pixel.clk, + [1] = &exynos4_clk_sclk_hdmiphy, +}; + +static struct clksrc_sources exynos4_clkset_sclk_hdmi = { + .sources = exynos4_clkset_sclk_hdmi_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_hdmi_list), +}; + +static struct clksrc_clk exynos4_clk_sclk_hdmi = { + .clk = { + .name = "sclk_hdmi", + .enable = exynos4_clksrc_mask_tv_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &exynos4_clkset_sclk_hdmi, + .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 0, .size = 1 }, +}; + +static struct clk *exynos4_clkset_sclk_mixer_list[] = { + [0] = &exynos4_clk_sclk_dac.clk, + [1] = &exynos4_clk_sclk_hdmi.clk, +}; + +static struct clksrc_sources exynos4_clkset_sclk_mixer = { + .sources = exynos4_clkset_sclk_mixer_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_mixer_list), +}; + +static struct clksrc_clk exynos4_clk_sclk_mixer = { + .clk = { + .name = "sclk_mixer", + .enable = exynos4_clksrc_mask_tv_ctrl, + .ctrlbit = (1 << 4), + }, + .sources = &exynos4_clkset_sclk_mixer, + .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 4, .size = 1 }, +}; + +static struct clksrc_clk *exynos4_sclk_tv[] = { + &exynos4_clk_sclk_dac, + &exynos4_clk_sclk_pixel, + &exynos4_clk_sclk_hdmi, + &exynos4_clk_sclk_mixer, +}; + +static struct clksrc_clk exynos4_clk_dout_mmc0 = { + .clk = { + .name = "dout_mmc0", + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_dout_mmc1 = { + .clk = { + .name = "dout_mmc1", + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 4, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_dout_mmc2 = { + .clk = { + .name = "dout_mmc2", + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 8, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_dout_mmc3 = { + .clk = { + .name = "dout_mmc3", + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 12, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_dout_mmc4 = { + .clk = { + .name = "dout_mmc4", + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 16, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clksrcs[] = { + { + .clk = { + .name = "sclk_pwm", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 24, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL3, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_csis", + .devname = "s5p-mipi-csis.0", + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 24, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 24, .size = 4 }, + }, { + .clk = { + .name = "sclk_csis", + .devname = "s5p-mipi-csis.1", + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 28), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 28, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 28, .size = 4 }, + }, { + .clk = { + .name = "sclk_cam0", + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 16), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 16, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_cam1", + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 20), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 20, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .devname = "exynos4-fimc.0", + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .devname = "exynos4-fimc.1", + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 4), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 4, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .devname = "exynos4-fimc.2", + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 8), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 8, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 8, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .devname = "exynos4-fimc.3", + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 12), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 12, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 12, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimd", + .devname = "exynos4-fb.0", + .enable = exynos4_clksrc_mask_lcd0_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_LCD0, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_LCD0, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimg2d", + }, + .sources = &exynos4_clkset_mout_g2d, + .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 8, .size = 1 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_IMAGE, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_mfc", + .devname = "s5p-mfc", + }, + .sources = &exynos4_clkset_mout_mfc, + .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 8, .size = 1 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_MFC, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_dwmmc", + .parent = &exynos4_clk_dout_mmc4.clk, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 16), + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 8, .size = 8 }, + } +}; + +static struct clksrc_clk exynos4_clk_sclk_uart0 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.0", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_uart1 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.1", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 4), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 4, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 4, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_uart2 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.2", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 8), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 8, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_uart3 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.3", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 12), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 12, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 12, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_mmc0 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.0", + .parent = &exynos4_clk_dout_mmc0.clk, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 0), + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 8, .size = 8 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_mmc1 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.1", + .parent = &exynos4_clk_dout_mmc1.clk, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 4), + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 24, .size = 8 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_mmc2 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.2", + .parent = &exynos4_clk_dout_mmc2.clk, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 8), + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 8, .size = 8 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_mmc3 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.3", + .parent = &exynos4_clk_dout_mmc3.clk, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 12), + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 24, .size = 8 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_spi0 = { + .clk = { + .name = "sclk_spi", + .devname = "s3c64xx-spi.0", + .enable = exynos4_clksrc_mask_peril1_ctrl, + .ctrlbit = (1 << 16), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 16, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_spi1 = { + .clk = { + .name = "sclk_spi", + .devname = "s3c64xx-spi.1", + .enable = exynos4_clksrc_mask_peril1_ctrl, + .ctrlbit = (1 << 20), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 20, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_spi2 = { + .clk = { + .name = "sclk_spi", + .devname = "s3c64xx-spi.2", + .enable = exynos4_clksrc_mask_peril1_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 24, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 0, .size = 4 }, +}; + +/* Clock initialization code */ +static struct clksrc_clk *exynos4_sysclks[] = { + &exynos4_clk_mout_apll, + &exynos4_clk_sclk_apll, + &exynos4_clk_mout_epll, + &exynos4_clk_mout_mpll, + &exynos4_clk_moutcore, + &exynos4_clk_coreclk, + &exynos4_clk_armclk, + &exynos4_clk_aclk_corem0, + &exynos4_clk_aclk_cores, + &exynos4_clk_aclk_corem1, + &exynos4_clk_periphclk, + &exynos4_clk_mout_corebus, + &exynos4_clk_sclk_dmc, + &exynos4_clk_aclk_cored, + &exynos4_clk_aclk_corep, + &exynos4_clk_aclk_acp, + &exynos4_clk_pclk_acp, + &exynos4_clk_vpllsrc, + &exynos4_clk_sclk_vpll, + &exynos4_clk_aclk_200, + &exynos4_clk_aclk_100, + &exynos4_clk_aclk_160, + &exynos4_clk_aclk_133, + &exynos4_clk_dout_mmc0, + &exynos4_clk_dout_mmc1, + &exynos4_clk_dout_mmc2, + &exynos4_clk_dout_mmc3, + &exynos4_clk_dout_mmc4, + &exynos4_clk_mout_mfc0, + &exynos4_clk_mout_mfc1, +}; + +static struct clk *exynos4_clk_cdev[] = { + &exynos4_clk_pdma0, + &exynos4_clk_pdma1, +}; + +static struct clksrc_clk *exynos4_clksrc_cdev[] = { + &exynos4_clk_sclk_uart0, + &exynos4_clk_sclk_uart1, + &exynos4_clk_sclk_uart2, + &exynos4_clk_sclk_uart3, + &exynos4_clk_sclk_mmc0, + &exynos4_clk_sclk_mmc1, + &exynos4_clk_sclk_mmc2, + &exynos4_clk_sclk_mmc3, + &exynos4_clk_sclk_spi0, + &exynos4_clk_sclk_spi1, + &exynos4_clk_sclk_spi2, + +}; + +static struct clk_lookup exynos4_clk_lookup[] = { + CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos4_clk_sclk_uart0.clk), + CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk), + CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk), + CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk), + CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk), + CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk), + CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk), + CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk), + CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0), + CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1), + CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk), + CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk), + CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk), +}; + +static int xtal_rate; + +static unsigned long exynos4_fout_apll_get_rate(struct clk *clk) +{ + if (soc_is_exynos4210()) + return s5p_get_pll45xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0), + pll_4508); + else if (soc_is_exynos4212() || soc_is_exynos4412()) + return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0)); + else + return 0; +} + +static struct clk_ops exynos4_fout_apll_ops = { + .get_rate = exynos4_fout_apll_get_rate, +}; + +static u32 exynos4_vpll_div[][8] = { + { 54000000, 3, 53, 3, 1024, 0, 17, 0 }, + { 108000000, 3, 53, 2, 1024, 0, 17, 0 }, +}; + +static unsigned long exynos4_vpll_get_rate(struct clk *clk) +{ + return clk->rate; +} + +static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int vpll_con0, vpll_con1 = 0; + unsigned int i; + + /* Return if nothing changed */ + if (clk->rate == rate) + return 0; + + vpll_con0 = __raw_readl(EXYNOS4_VPLL_CON0); + vpll_con0 &= ~(0x1 << 27 | \ + PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \ + PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \ + PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT); + + vpll_con1 = __raw_readl(EXYNOS4_VPLL_CON1); + vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT | \ + PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT | \ + PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT); + + for (i = 0; i < ARRAY_SIZE(exynos4_vpll_div); i++) { + if (exynos4_vpll_div[i][0] == rate) { + vpll_con0 |= exynos4_vpll_div[i][1] << PLL46XX_PDIV_SHIFT; + vpll_con0 |= exynos4_vpll_div[i][2] << PLL46XX_MDIV_SHIFT; + vpll_con0 |= exynos4_vpll_div[i][3] << PLL46XX_SDIV_SHIFT; + vpll_con1 |= exynos4_vpll_div[i][4] << PLL46XX_KDIV_SHIFT; + vpll_con1 |= exynos4_vpll_div[i][5] << PLL46XX_MFR_SHIFT; + vpll_con1 |= exynos4_vpll_div[i][6] << PLL46XX_MRR_SHIFT; + vpll_con0 |= exynos4_vpll_div[i][7] << 27; + break; + } + } + + if (i == ARRAY_SIZE(exynos4_vpll_div)) { + printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n", + __func__); + return -EINVAL; + } + + __raw_writel(vpll_con0, EXYNOS4_VPLL_CON0); + __raw_writel(vpll_con1, EXYNOS4_VPLL_CON1); + + /* Wait for VPLL lock */ + while (!(__raw_readl(EXYNOS4_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT))) + continue; + + clk->rate = rate; + return 0; +} + +static struct clk_ops exynos4_vpll_ops = { + .get_rate = exynos4_vpll_get_rate, + .set_rate = exynos4_vpll_set_rate, +}; + +void __init_or_cpufreq exynos4_setup_clocks(void) +{ + struct clk *xtal_clk; + unsigned long apll = 0; + unsigned long mpll = 0; + unsigned long epll = 0; + unsigned long vpll = 0; + unsigned long vpllsrc; + unsigned long xtal; + unsigned long armclk; + unsigned long sclk_dmc; + unsigned long aclk_200; + unsigned long aclk_100; + unsigned long aclk_160; + unsigned long aclk_133; + unsigned int ptr; + + printk(KERN_DEBUG "%s: registering clocks\n", __func__); + + xtal_clk = clk_get(NULL, "xtal"); + BUG_ON(IS_ERR(xtal_clk)); + + xtal = clk_get_rate(xtal_clk); + + xtal_rate = xtal; + + clk_put(xtal_clk); + + printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); + + if (soc_is_exynos4210()) { + apll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_APLL_CON0), + pll_4508); + mpll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0), + pll_4508); + epll = s5p_get_pll46xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0), + __raw_readl(EXYNOS4_EPLL_CON1), pll_4600); + + vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk); + vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0), + __raw_readl(EXYNOS4_VPLL_CON1), pll_4650c); + } else if (soc_is_exynos4212() || soc_is_exynos4412()) { + apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_APLL_CON0)); + mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0)); + epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0), + __raw_readl(EXYNOS4_EPLL_CON1)); + + vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk); + vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0), + __raw_readl(EXYNOS4_VPLL_CON1)); + } else { + /* nothing */ + } + + clk_fout_apll.ops = &exynos4_fout_apll_ops; + clk_fout_mpll.rate = mpll; + clk_fout_epll.rate = epll; + clk_fout_vpll.ops = &exynos4_vpll_ops; + clk_fout_vpll.rate = vpll; + + printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld", + apll, mpll, epll, vpll); + + armclk = clk_get_rate(&exynos4_clk_armclk.clk); + sclk_dmc = clk_get_rate(&exynos4_clk_sclk_dmc.clk); + + aclk_200 = clk_get_rate(&exynos4_clk_aclk_200.clk); + aclk_100 = clk_get_rate(&exynos4_clk_aclk_100.clk); + aclk_160 = clk_get_rate(&exynos4_clk_aclk_160.clk); + aclk_133 = clk_get_rate(&exynos4_clk_aclk_133.clk); + + printk(KERN_INFO "EXYNOS4: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n" + "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n", + armclk, sclk_dmc, aclk_200, + aclk_100, aclk_160, aclk_133); + + clk_f.rate = armclk; + clk_h.rate = sclk_dmc; + clk_p.rate = aclk_100; + + for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrcs); ptr++) + s3c_set_clksrc(&exynos4_clksrcs[ptr], true); +} + +static struct clk *exynos4_clks[] __initdata = { + &exynos4_clk_sclk_hdmi27m, + &exynos4_clk_sclk_hdmiphy, + &exynos4_clk_sclk_usbphy0, + &exynos4_clk_sclk_usbphy1, +}; + +#ifdef CONFIG_PM_SLEEP +static int exynos4_clock_suspend(void) +{ + s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save)); + return 0; +} + +static void exynos4_clock_resume(void) +{ + s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save)); +} + +#else +#define exynos4_clock_suspend NULL +#define exynos4_clock_resume NULL +#endif + +static struct syscore_ops exynos4_clock_syscore_ops = { + .suspend = exynos4_clock_suspend, + .resume = exynos4_clock_resume, +}; + +void __init exynos4_register_clocks(void) +{ + int ptr; + + s3c24xx_register_clocks(exynos4_clks, ARRAY_SIZE(exynos4_clks)); + + for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sysclks); ptr++) + s3c_register_clksrc(exynos4_sysclks[ptr], 1); + + for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sclk_tv); ptr++) + s3c_register_clksrc(exynos4_sclk_tv[ptr], 1); + + for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrc_cdev); ptr++) + s3c_register_clksrc(exynos4_clksrc_cdev[ptr], 1); + + s3c_register_clksrc(exynos4_clksrcs, ARRAY_SIZE(exynos4_clksrcs)); + s3c_register_clocks(exynos4_init_clocks_on, ARRAY_SIZE(exynos4_init_clocks_on)); + + s3c24xx_register_clocks(exynos4_clk_cdev, ARRAY_SIZE(exynos4_clk_cdev)); + for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clk_cdev); ptr++) + s3c_disable_clocks(exynos4_clk_cdev[ptr], 1); + + s3c_register_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off)); + s3c_disable_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off)); + clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup)); + + register_syscore_ops(&exynos4_clock_syscore_ops); + s3c24xx_register_clock(&dummy_apb_pclk); + + s3c_pwmclk_init(); +} diff --git a/arch/arm/mach-exynos/clock-exynos4.h b/arch/arm/mach-exynos/clock-exynos4.h new file mode 100644 index 000000000000..cb71c29c14d1 --- /dev/null +++ b/arch/arm/mach-exynos/clock-exynos4.h @@ -0,0 +1,30 @@ +/* + * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Header file for exynos4 clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_CLOCK_H +#define __ASM_ARCH_CLOCK_H __FILE__ + +#include <linux/clk.h> + +extern struct clksrc_clk exynos4_clk_aclk_133; +extern struct clksrc_clk exynos4_clk_mout_mpll; + +extern struct clksrc_sources exynos4_clkset_mout_corebus; +extern struct clksrc_sources exynos4_clkset_group; + +extern struct clk *exynos4_clkset_aclk_top_list[]; +extern struct clk *exynos4_clkset_group_list[]; + +extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable); +extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable); +extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable); + +#endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c index 13312ccb2d93..3b131e4b6ef5 100644 --- a/arch/arm/mach-exynos/clock-exynos4210.c +++ b/arch/arm/mach-exynos/clock-exynos4210.c @@ -1,7 +1,5 @@ /* - * linux/arch/arm/mach-exynos4/clock-exynos4210.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * * EXYNOS4210 - Clock support @@ -28,20 +26,20 @@ #include <mach/hardware.h> #include <mach/map.h> #include <mach/regs-clock.h> -#include <mach/exynos4-clock.h> #include "common.h" +#include "clock-exynos4.h" #ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4210_clock_save[] = { - SAVE_ITEM(S5P_CLKSRC_IMAGE), - SAVE_ITEM(S5P_CLKSRC_LCD1), - SAVE_ITEM(S5P_CLKDIV_IMAGE), - SAVE_ITEM(S5P_CLKDIV_LCD1), - SAVE_ITEM(S5P_CLKSRC_MASK_LCD1), - SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4210), - SAVE_ITEM(S5P_CLKGATE_IP_LCD1), - SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210), + SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE), + SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE), + SAVE_ITEM(EXYNOS4210_CLKSRC_LCD1), + SAVE_ITEM(EXYNOS4210_CLKDIV_LCD1), + SAVE_ITEM(EXYNOS4210_CLKSRC_MASK_LCD1), + SAVE_ITEM(EXYNOS4210_CLKGATE_IP_IMAGE), + SAVE_ITEM(EXYNOS4210_CLKGATE_IP_LCD1), + SAVE_ITEM(EXYNOS4210_CLKGATE_IP_PERIR), }; #endif @@ -51,7 +49,7 @@ static struct clksrc_clk *sysclks[] = { static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) { - return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable); + return s5p_gatectrl(EXYNOS4210_CLKSRC_MASK_LCD1, clk, enable); } static struct clksrc_clk clksrcs[] = { @@ -62,9 +60,9 @@ static struct clksrc_clk clksrcs[] = { .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 24), }, - .sources = &clkset_mout_corebus, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 }, + .sources = &exynos4_clkset_mout_corebus, + .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 24, .size = 1 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS0, .shift = 20, .size = 4 }, }, { .clk = { .name = "sclk_fimd", @@ -72,9 +70,9 @@ static struct clksrc_clk clksrcs[] = { .enable = exynos4_clksrc_mask_lcd1_ctrl, .ctrlbit = (1 << 0), }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4210_CLKSRC_LCD1, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS4210_CLKDIV_LCD1, .shift = 0, .size = 4 }, }, }; @@ -82,13 +80,13 @@ static struct clk init_clocks_off[] = { { .name = "sataphy", .id = -1, - .parent = &clk_aclk_133.clk, + .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 3), }, { .name = "sata", .id = -1, - .parent = &clk_aclk_133.clk, + .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 10), }, { @@ -117,7 +115,7 @@ static void exynos4210_clock_resume(void) #define exynos4210_clock_resume NULL #endif -struct syscore_ops exynos4210_clock_syscore_ops = { +static struct syscore_ops exynos4210_clock_syscore_ops = { .suspend = exynos4210_clock_suspend, .resume = exynos4210_clock_resume, }; @@ -126,9 +124,9 @@ void __init exynos4210_register_clocks(void) { int ptr; - clk_mout_mpll.reg_src.reg = S5P_CLKSRC_CPU; - clk_mout_mpll.reg_src.shift = 8; - clk_mout_mpll.reg_src.size = 1; + exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_CPU; + exynos4_clk_mout_mpll.reg_src.shift = 8; + exynos4_clk_mout_mpll.reg_src.size = 1; for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) s3c_register_clksrc(sysclks[ptr], 1); diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c index 48af28566fa1..3ecc01e06f74 100644 --- a/arch/arm/mach-exynos/clock-exynos4212.c +++ b/arch/arm/mach-exynos/clock-exynos4212.c @@ -1,7 +1,5 @@ /* - * linux/arch/arm/mach-exynos4/clock-exynos4212.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * * EXYNOS4212 - Clock support @@ -28,22 +26,22 @@ #include <mach/hardware.h> #include <mach/map.h> #include <mach/regs-clock.h> -#include <mach/exynos4-clock.h> #include "common.h" +#include "clock-exynos4.h" #ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4212_clock_save[] = { - SAVE_ITEM(S5P_CLKSRC_IMAGE), - SAVE_ITEM(S5P_CLKDIV_IMAGE), - SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212), - SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212), + SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE), + SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE), + SAVE_ITEM(EXYNOS4212_CLKGATE_IP_IMAGE), + SAVE_ITEM(EXYNOS4212_CLKGATE_IP_PERIR), }; #endif static struct clk *clk_src_mpll_user_list[] = { [0] = &clk_fin_mpll, - [1] = &clk_mout_mpll.clk, + [1] = &exynos4_clk_mout_mpll.clk, }; static struct clksrc_sources clk_src_mpll_user = { @@ -56,7 +54,7 @@ static struct clksrc_clk clk_mout_mpll_user = { .name = "mout_mpll_user", }, .sources = &clk_src_mpll_user, - .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 24, .size = 1 }, + .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 24, .size = 1 }, }; static struct clksrc_clk *sysclks[] = { @@ -89,7 +87,7 @@ static void exynos4212_clock_resume(void) #define exynos4212_clock_resume NULL #endif -struct syscore_ops exynos4212_clock_syscore_ops = { +static struct syscore_ops exynos4212_clock_syscore_ops = { .suspend = exynos4212_clock_suspend, .resume = exynos4212_clock_resume, }; @@ -99,15 +97,15 @@ void __init exynos4212_register_clocks(void) int ptr; /* usbphy1 is removed */ - clkset_group_list[4] = NULL; + exynos4_clkset_group_list[4] = NULL; /* mout_mpll_user is used */ - clkset_group_list[6] = &clk_mout_mpll_user.clk; - clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk; + exynos4_clkset_group_list[6] = &clk_mout_mpll_user.clk; + exynos4_clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk; - clk_mout_mpll.reg_src.reg = S5P_CLKSRC_DMC; - clk_mout_mpll.reg_src.shift = 12; - clk_mout_mpll.reg_src.size = 1; + exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_DMC; + exynos4_clk_mout_mpll.reg_src.shift = 12; + exynos4_clk_mout_mpll.reg_src.size = 1; for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) s3c_register_clksrc(sysclks[ptr], 1); diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c deleted file mode 100644 index 187287aa57ab..000000000000 --- a/arch/arm/mach-exynos/clock.c +++ /dev/null @@ -1,1564 +0,0 @@ -/* linux/arch/arm/mach-exynos4/clock.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/syscore_ops.h> - -#include <plat/cpu-freq.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/s5p-clock.h> -#include <plat/clock-clksrc.h> -#include <plat/pm.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> -#include <mach/sysmmu.h> -#include <mach/exynos4-clock.h> - -#include "common.h" - -#ifdef CONFIG_PM_SLEEP -static struct sleep_save exynos4_clock_save[] = { - SAVE_ITEM(S5P_CLKDIV_LEFTBUS), - SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), - SAVE_ITEM(S5P_CLKDIV_RIGHTBUS), - SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS), - SAVE_ITEM(S5P_CLKSRC_TOP0), - SAVE_ITEM(S5P_CLKSRC_TOP1), - SAVE_ITEM(S5P_CLKSRC_CAM), - SAVE_ITEM(S5P_CLKSRC_TV), - SAVE_ITEM(S5P_CLKSRC_MFC), - SAVE_ITEM(S5P_CLKSRC_G3D), - SAVE_ITEM(S5P_CLKSRC_LCD0), - SAVE_ITEM(S5P_CLKSRC_MAUDIO), - SAVE_ITEM(S5P_CLKSRC_FSYS), - SAVE_ITEM(S5P_CLKSRC_PERIL0), - SAVE_ITEM(S5P_CLKSRC_PERIL1), - SAVE_ITEM(S5P_CLKDIV_CAM), - SAVE_ITEM(S5P_CLKDIV_TV), - SAVE_ITEM(S5P_CLKDIV_MFC), - SAVE_ITEM(S5P_CLKDIV_G3D), - SAVE_ITEM(S5P_CLKDIV_LCD0), - SAVE_ITEM(S5P_CLKDIV_MAUDIO), - SAVE_ITEM(S5P_CLKDIV_FSYS0), - SAVE_ITEM(S5P_CLKDIV_FSYS1), - SAVE_ITEM(S5P_CLKDIV_FSYS2), - SAVE_ITEM(S5P_CLKDIV_FSYS3), - SAVE_ITEM(S5P_CLKDIV_PERIL0), - SAVE_ITEM(S5P_CLKDIV_PERIL1), - SAVE_ITEM(S5P_CLKDIV_PERIL2), - SAVE_ITEM(S5P_CLKDIV_PERIL3), - SAVE_ITEM(S5P_CLKDIV_PERIL4), - SAVE_ITEM(S5P_CLKDIV_PERIL5), - SAVE_ITEM(S5P_CLKDIV_TOP), - SAVE_ITEM(S5P_CLKSRC_MASK_TOP), - SAVE_ITEM(S5P_CLKSRC_MASK_CAM), - SAVE_ITEM(S5P_CLKSRC_MASK_TV), - SAVE_ITEM(S5P_CLKSRC_MASK_LCD0), - SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO), - SAVE_ITEM(S5P_CLKSRC_MASK_FSYS), - SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0), - SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1), - SAVE_ITEM(S5P_CLKDIV2_RATIO), - SAVE_ITEM(S5P_CLKGATE_SCLKCAM), - SAVE_ITEM(S5P_CLKGATE_IP_CAM), - SAVE_ITEM(S5P_CLKGATE_IP_TV), - SAVE_ITEM(S5P_CLKGATE_IP_MFC), - SAVE_ITEM(S5P_CLKGATE_IP_G3D), - SAVE_ITEM(S5P_CLKGATE_IP_LCD0), - SAVE_ITEM(S5P_CLKGATE_IP_FSYS), - SAVE_ITEM(S5P_CLKGATE_IP_GPS), - SAVE_ITEM(S5P_CLKGATE_IP_PERIL), - SAVE_ITEM(S5P_CLKGATE_BLOCK), - SAVE_ITEM(S5P_CLKSRC_MASK_DMC), - SAVE_ITEM(S5P_CLKSRC_DMC), - SAVE_ITEM(S5P_CLKDIV_DMC0), - SAVE_ITEM(S5P_CLKDIV_DMC1), - SAVE_ITEM(S5P_CLKGATE_IP_DMC), - SAVE_ITEM(S5P_CLKSRC_CPU), - SAVE_ITEM(S5P_CLKDIV_CPU), - SAVE_ITEM(S5P_CLKDIV_CPU + 0x4), - SAVE_ITEM(S5P_CLKGATE_SCLKCPU), - SAVE_ITEM(S5P_CLKGATE_IP_CPU), -}; -#endif - -struct clk clk_sclk_hdmi27m = { - .name = "sclk_hdmi27m", - .rate = 27000000, -}; - -struct clk clk_sclk_hdmiphy = { - .name = "sclk_hdmiphy", -}; - -struct clk clk_sclk_usbphy0 = { - .name = "sclk_usbphy0", - .rate = 27000000, -}; - -struct clk clk_sclk_usbphy1 = { - .name = "sclk_usbphy1", -}; - -static struct clk dummy_apb_pclk = { - .name = "apb_pclk", - .id = -1, -}; - -static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable); -} - -static int exynos4_clksrc_mask_cam_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_CAM, clk, enable); -} - -static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable); -} - -int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable); -} - -static int exynos4_clksrc_mask_peril0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL0, clk, enable); -} - -static int exynos4_clksrc_mask_peril1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL1, clk, enable); -} - -static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_MFC, clk, enable); -} - -static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_TV, clk, enable); -} - -static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable); -} - -static int exynos4_clk_ip_tv_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_TV, clk, enable); -} - -static int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_IMAGE, clk, enable); -} - -static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable); -} - -int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable); -} - -int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable); -} - -static int exynos4_clk_ip_peril_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_PERIL, clk, enable); -} - -static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable); -} - -static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); -} - -static int exynos4_clk_dac_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable); -} - -/* Core list of CMU_CPU side */ - -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 }, -}; - -struct clksrc_clk clk_sclk_apll = { - .clk = { - .name = "sclk_apll", - .parent = &clk_mout_apll.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 }, -}; - -struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - }, - .sources = &clk_src_epll, - .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 }, -}; - -struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - }, - .sources = &clk_src_mpll, - - /* reg_src will be added in each SoCs' clock */ -}; - -static struct clk *clkset_moutcore_list[] = { - [0] = &clk_mout_apll.clk, - [1] = &clk_mout_mpll.clk, -}; - -static struct clksrc_sources clkset_moutcore = { - .sources = clkset_moutcore_list, - .nr_sources = ARRAY_SIZE(clkset_moutcore_list), -}; - -static struct clksrc_clk clk_moutcore = { - .clk = { - .name = "moutcore", - }, - .sources = &clkset_moutcore, - .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 16, .size = 1 }, -}; - -static struct clksrc_clk clk_coreclk = { - .clk = { - .name = "core_clk", - .parent = &clk_moutcore.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk clk_armclk = { - .clk = { - .name = "armclk", - .parent = &clk_coreclk.clk, - }, -}; - -static struct clksrc_clk clk_aclk_corem0 = { - .clk = { - .name = "aclk_corem0", - .parent = &clk_coreclk.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 }, -}; - -static struct clksrc_clk clk_aclk_cores = { - .clk = { - .name = "aclk_cores", - .parent = &clk_coreclk.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 }, -}; - -static struct clksrc_clk clk_aclk_corem1 = { - .clk = { - .name = "aclk_corem1", - .parent = &clk_coreclk.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 8, .size = 3 }, -}; - -static struct clksrc_clk clk_periphclk = { - .clk = { - .name = "periphclk", - .parent = &clk_coreclk.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 12, .size = 3 }, -}; - -/* Core list of CMU_CORE side */ - -struct clk *clkset_corebus_list[] = { - [0] = &clk_mout_mpll.clk, - [1] = &clk_sclk_apll.clk, -}; - -struct clksrc_sources clkset_mout_corebus = { - .sources = clkset_corebus_list, - .nr_sources = ARRAY_SIZE(clkset_corebus_list), -}; - -static struct clksrc_clk clk_mout_corebus = { - .clk = { - .name = "mout_corebus", - }, - .sources = &clkset_mout_corebus, - .reg_src = { .reg = S5P_CLKSRC_DMC, .shift = 4, .size = 1 }, -}; - -static struct clksrc_clk clk_sclk_dmc = { - .clk = { - .name = "sclk_dmc", - .parent = &clk_mout_corebus.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 12, .size = 3 }, -}; - -static struct clksrc_clk clk_aclk_cored = { - .clk = { - .name = "aclk_cored", - .parent = &clk_sclk_dmc.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 16, .size = 3 }, -}; - -static struct clksrc_clk clk_aclk_corep = { - .clk = { - .name = "aclk_corep", - .parent = &clk_aclk_cored.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 20, .size = 3 }, -}; - -static struct clksrc_clk clk_aclk_acp = { - .clk = { - .name = "aclk_acp", - .parent = &clk_mout_corebus.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk clk_pclk_acp = { - .clk = { - .name = "pclk_acp", - .parent = &clk_aclk_acp.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 4, .size = 3 }, -}; - -/* Core list of CMU_TOP side */ - -struct clk *clkset_aclk_top_list[] = { - [0] = &clk_mout_mpll.clk, - [1] = &clk_sclk_apll.clk, -}; - -struct clksrc_sources clkset_aclk = { - .sources = clkset_aclk_top_list, - .nr_sources = ARRAY_SIZE(clkset_aclk_top_list), -}; - -static struct clksrc_clk clk_aclk_200 = { - .clk = { - .name = "aclk_200", - }, - .sources = &clkset_aclk, - .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 12, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk clk_aclk_100 = { - .clk = { - .name = "aclk_100", - }, - .sources = &clkset_aclk, - .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 16, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 4, .size = 4 }, -}; - -static struct clksrc_clk clk_aclk_160 = { - .clk = { - .name = "aclk_160", - }, - .sources = &clkset_aclk, - .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 20, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 }, -}; - -struct clksrc_clk clk_aclk_133 = { - .clk = { - .name = "aclk_133", - }, - .sources = &clkset_aclk, - .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 24, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 12, .size = 3 }, -}; - -static struct clk *clkset_vpllsrc_list[] = { - [0] = &clk_fin_vpll, - [1] = &clk_sclk_hdmi27m, -}; - -static struct clksrc_sources clkset_vpllsrc = { - .sources = clkset_vpllsrc_list, - .nr_sources = ARRAY_SIZE(clkset_vpllsrc_list), -}; - -static struct clksrc_clk clk_vpllsrc = { - .clk = { - .name = "vpll_src", - .enable = exynos4_clksrc_mask_top_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_vpllsrc, - .reg_src = { .reg = S5P_CLKSRC_TOP1, .shift = 0, .size = 1 }, -}; - -static struct clk *clkset_sclk_vpll_list[] = { - [0] = &clk_vpllsrc.clk, - [1] = &clk_fout_vpll, -}; - -static struct clksrc_sources clkset_sclk_vpll = { - .sources = clkset_sclk_vpll_list, - .nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list), -}; - -struct clksrc_clk clk_sclk_vpll = { - .clk = { - .name = "sclk_vpll", - }, - .sources = &clkset_sclk_vpll, - .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 8, .size = 1 }, -}; - -static struct clk init_clocks_off[] = { - { - .name = "timers", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1<<24), - }, { - .name = "csis", - .devname = "s5p-mipi-csis.0", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "csis", - .devname = "s5p-mipi-csis.1", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "fimc", - .devname = "exynos4-fimc.0", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "fimc", - .devname = "exynos4-fimc.1", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "fimc", - .devname = "exynos4-fimc.2", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "fimc", - .devname = "exynos4-fimc.3", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "fimd", - .devname = "exynos4-fb.0", - .enable = exynos4_clk_ip_lcd0_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.0", - .parent = &clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.2", - .parent = &clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.3", - .parent = &clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "dwmmc", - .parent = &clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 9), - }, { - .name = "dac", - .devname = "s5p-sdo", - .enable = exynos4_clk_ip_tv_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "mixer", - .devname = "s5p-mixer", - .enable = exynos4_clk_ip_tv_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "vp", - .devname = "s5p-mixer", - .enable = exynos4_clk_ip_tv_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "hdmi", - .devname = "exynos4-hdmi", - .enable = exynos4_clk_ip_tv_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "hdmiphy", - .devname = "exynos4-hdmi", - .enable = exynos4_clk_hdmiphy_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "dacphy", - .devname = "s5p-sdo", - .enable = exynos4_clk_dac_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "adc", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 15), - }, { - .name = "keypad", - .enable = exynos4_clk_ip_perir_ctrl, - .ctrlbit = (1 << 16), - }, { - .name = "rtc", - .enable = exynos4_clk_ip_perir_ctrl, - .ctrlbit = (1 << 15), - }, { - .name = "watchdog", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_perir_ctrl, - .ctrlbit = (1 << 14), - }, { - .name = "usbhost", - .enable = exynos4_clk_ip_fsys_ctrl , - .ctrlbit = (1 << 12), - }, { - .name = "otg", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 13), - }, { - .name = "spi", - .devname = "s3c64xx-spi.0", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 16), - }, { - .name = "spi", - .devname = "s3c64xx-spi.1", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 17), - }, { - .name = "spi", - .devname = "s3c64xx-spi.2", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 18), - }, { - .name = "iis", - .devname = "samsung-i2s.0", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 19), - }, { - .name = "iis", - .devname = "samsung-i2s.1", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 20), - }, { - .name = "iis", - .devname = "samsung-i2s.2", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 21), - }, { - .name = "ac97", - .devname = "samsung-ac97", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 27), - }, { - .name = "fimg2d", - .enable = exynos4_clk_ip_image_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "mfc", - .devname = "s5p-mfc", - .enable = exynos4_clk_ip_mfc_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.0", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.1", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.2", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.3", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 9), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.4", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 10), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.5", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 11), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.6", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.7", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 13), - }, { - .name = "i2c", - .devname = "s3c2440-hdmiphy-i2c", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 14), - }, { - .name = "SYSMMU_MDMA", - .enable = exynos4_clk_ip_image_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "SYSMMU_FIMC0", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "SYSMMU_FIMC1", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "SYSMMU_FIMC2", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 9), - }, { - .name = "SYSMMU_FIMC3", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 10), - }, { - .name = "SYSMMU_JPEG", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 11), - }, { - .name = "SYSMMU_FIMD0", - .enable = exynos4_clk_ip_lcd0_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "SYSMMU_FIMD1", - .enable = exynos4_clk_ip_lcd1_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "SYSMMU_PCIe", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 18), - }, { - .name = "SYSMMU_G2D", - .enable = exynos4_clk_ip_image_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "SYSMMU_ROTATOR", - .enable = exynos4_clk_ip_image_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "SYSMMU_TV", - .enable = exynos4_clk_ip_tv_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "SYSMMU_MFC_L", - .enable = exynos4_clk_ip_mfc_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "SYSMMU_MFC_R", - .enable = exynos4_clk_ip_mfc_ctrl, - .ctrlbit = (1 << 2), - } -}; - -static struct clk init_clocks[] = { - { - .name = "uart", - .devname = "s5pv210-uart.0", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "uart", - .devname = "s5pv210-uart.1", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "uart", - .devname = "s5pv210-uart.2", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "uart", - .devname = "s5pv210-uart.3", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "uart", - .devname = "s5pv210-uart.4", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "uart", - .devname = "s5pv210-uart.5", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 5), - } -}; - -static struct clk clk_pdma0 = { - .name = "dma", - .devname = "dma-pl330.0", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 0), -}; - -static struct clk clk_pdma1 = { - .name = "dma", - .devname = "dma-pl330.1", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 1), -}; - -struct clk *clkset_group_list[] = { - [0] = &clk_ext_xtal_mux, - [1] = &clk_xusbxti, - [2] = &clk_sclk_hdmi27m, - [3] = &clk_sclk_usbphy0, - [4] = &clk_sclk_usbphy1, - [5] = &clk_sclk_hdmiphy, - [6] = &clk_mout_mpll.clk, - [7] = &clk_mout_epll.clk, - [8] = &clk_sclk_vpll.clk, -}; - -struct clksrc_sources clkset_group = { - .sources = clkset_group_list, - .nr_sources = ARRAY_SIZE(clkset_group_list), -}; - -static struct clk *clkset_mout_g2d0_list[] = { - [0] = &clk_mout_mpll.clk, - [1] = &clk_sclk_apll.clk, -}; - -static struct clksrc_sources clkset_mout_g2d0 = { - .sources = clkset_mout_g2d0_list, - .nr_sources = ARRAY_SIZE(clkset_mout_g2d0_list), -}; - -static struct clksrc_clk clk_mout_g2d0 = { - .clk = { - .name = "mout_g2d0", - }, - .sources = &clkset_mout_g2d0, - .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 0, .size = 1 }, -}; - -static struct clk *clkset_mout_g2d1_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_sclk_vpll.clk, -}; - -static struct clksrc_sources clkset_mout_g2d1 = { - .sources = clkset_mout_g2d1_list, - .nr_sources = ARRAY_SIZE(clkset_mout_g2d1_list), -}; - -static struct clksrc_clk clk_mout_g2d1 = { - .clk = { - .name = "mout_g2d1", - }, - .sources = &clkset_mout_g2d1, - .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 4, .size = 1 }, -}; - -static struct clk *clkset_mout_g2d_list[] = { - [0] = &clk_mout_g2d0.clk, - [1] = &clk_mout_g2d1.clk, -}; - -static struct clksrc_sources clkset_mout_g2d = { - .sources = clkset_mout_g2d_list, - .nr_sources = ARRAY_SIZE(clkset_mout_g2d_list), -}; - -static struct clk *clkset_mout_mfc0_list[] = { - [0] = &clk_mout_mpll.clk, - [1] = &clk_sclk_apll.clk, -}; - -static struct clksrc_sources clkset_mout_mfc0 = { - .sources = clkset_mout_mfc0_list, - .nr_sources = ARRAY_SIZE(clkset_mout_mfc0_list), -}; - -static struct clksrc_clk clk_mout_mfc0 = { - .clk = { - .name = "mout_mfc0", - }, - .sources = &clkset_mout_mfc0, - .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 0, .size = 1 }, -}; - -static struct clk *clkset_mout_mfc1_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_sclk_vpll.clk, -}; - -static struct clksrc_sources clkset_mout_mfc1 = { - .sources = clkset_mout_mfc1_list, - .nr_sources = ARRAY_SIZE(clkset_mout_mfc1_list), -}; - -static struct clksrc_clk clk_mout_mfc1 = { - .clk = { - .name = "mout_mfc1", - }, - .sources = &clkset_mout_mfc1, - .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 4, .size = 1 }, -}; - -static struct clk *clkset_mout_mfc_list[] = { - [0] = &clk_mout_mfc0.clk, - [1] = &clk_mout_mfc1.clk, -}; - -static struct clksrc_sources clkset_mout_mfc = { - .sources = clkset_mout_mfc_list, - .nr_sources = ARRAY_SIZE(clkset_mout_mfc_list), -}; - -static struct clk *clkset_sclk_dac_list[] = { - [0] = &clk_sclk_vpll.clk, - [1] = &clk_sclk_hdmiphy, -}; - -static struct clksrc_sources clkset_sclk_dac = { - .sources = clkset_sclk_dac_list, - .nr_sources = ARRAY_SIZE(clkset_sclk_dac_list), -}; - -static struct clksrc_clk clk_sclk_dac = { - .clk = { - .name = "sclk_dac", - .enable = exynos4_clksrc_mask_tv_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &clkset_sclk_dac, - .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 8, .size = 1 }, -}; - -static struct clksrc_clk clk_sclk_pixel = { - .clk = { - .name = "sclk_pixel", - .parent = &clk_sclk_vpll.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_TV, .shift = 0, .size = 4 }, -}; - -static struct clk *clkset_sclk_hdmi_list[] = { - [0] = &clk_sclk_pixel.clk, - [1] = &clk_sclk_hdmiphy, -}; - -static struct clksrc_sources clkset_sclk_hdmi = { - .sources = clkset_sclk_hdmi_list, - .nr_sources = ARRAY_SIZE(clkset_sclk_hdmi_list), -}; - -static struct clksrc_clk clk_sclk_hdmi = { - .clk = { - .name = "sclk_hdmi", - .enable = exynos4_clksrc_mask_tv_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_sclk_hdmi, - .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 0, .size = 1 }, -}; - -static struct clk *clkset_sclk_mixer_list[] = { - [0] = &clk_sclk_dac.clk, - [1] = &clk_sclk_hdmi.clk, -}; - -static struct clksrc_sources clkset_sclk_mixer = { - .sources = clkset_sclk_mixer_list, - .nr_sources = ARRAY_SIZE(clkset_sclk_mixer_list), -}; - -static struct clksrc_clk clk_sclk_mixer = { - .clk = { - .name = "sclk_mixer", - .enable = exynos4_clksrc_mask_tv_ctrl, - .ctrlbit = (1 << 4), - }, - .sources = &clkset_sclk_mixer, - .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 4, .size = 1 }, -}; - -static struct clksrc_clk *sclk_tv[] = { - &clk_sclk_dac, - &clk_sclk_pixel, - &clk_sclk_hdmi, - &clk_sclk_mixer, -}; - -static struct clksrc_clk clk_dout_mmc0 = { - .clk = { - .name = "dout_mmc0", - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_dout_mmc1 = { - .clk = { - .name = "dout_mmc1", - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 4, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk clk_dout_mmc2 = { - .clk = { - .name = "dout_mmc2", - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 8, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_dout_mmc3 = { - .clk = { - .name = "dout_mmc3", - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 12, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk clk_dout_mmc4 = { - .clk = { - .name = "dout_mmc4", - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 16, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "sclk_pwm", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 24, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL3, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_csis", - .devname = "s5p-mipi-csis.0", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 24, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 24, .size = 4 }, - }, { - .clk = { - .name = "sclk_csis", - .devname = "s5p-mipi-csis.1", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 28), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 28, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 }, - }, { - .clk = { - .name = "sclk_cam0", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 16), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 16, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "sclk_cam1", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 20), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 20, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "exynos4-fimc.0", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "exynos4-fimc.1", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 4), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 4, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "exynos4-fimc.2", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 8, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 8, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "exynos4-fimc.3", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 12), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 12, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 12, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimd", - .devname = "exynos4-fb.0", - .enable = exynos4_clksrc_mask_lcd0_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_LCD0, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimg2d", - }, - .sources = &clkset_mout_g2d, - .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 8, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_IMAGE, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_mfc", - .devname = "s5p-mfc", - }, - .sources = &clkset_mout_mfc, - .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 8, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_MFC, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_dwmmc", - .parent = &clk_dout_mmc4.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 16), - }, - .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 8, .size = 8 }, - } -}; - -static struct clksrc_clk clk_sclk_uart0 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.0", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_uart1 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.1", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 4), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_uart2 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.2", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_uart3 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.3", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 12), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_mmc0 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.0", - .parent = &clk_dout_mmc0.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 0), - }, - .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 }, -}; - -static struct clksrc_clk clk_sclk_mmc1 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.1", - .parent = &clk_dout_mmc1.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 4), - }, - .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 }, -}; - -static struct clksrc_clk clk_sclk_mmc2 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.2", - .parent = &clk_dout_mmc2.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 8), - }, - .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 }, -}; - -static struct clksrc_clk clk_sclk_mmc3 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.3", - .parent = &clk_dout_mmc3.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 12), - }, - .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 }, -}; - -static struct clksrc_clk clk_sclk_spi0 = { - .clk = { - .name = "sclk_spi", - .devname = "s3c64xx-spi.0", - .enable = exynos4_clksrc_mask_peril1_ctrl, - .ctrlbit = (1 << 16), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_spi1 = { - .clk = { - .name = "sclk_spi", - .devname = "s3c64xx-spi.1", - .enable = exynos4_clksrc_mask_peril1_ctrl, - .ctrlbit = (1 << 20), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_spi2 = { - .clk = { - .name = "sclk_spi", - .devname = "s3c64xx-spi.2", - .enable = exynos4_clksrc_mask_peril1_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 }, -}; - -/* Clock initialization code */ -static struct clksrc_clk *sysclks[] = { - &clk_mout_apll, - &clk_sclk_apll, - &clk_mout_epll, - &clk_mout_mpll, - &clk_moutcore, - &clk_coreclk, - &clk_armclk, - &clk_aclk_corem0, - &clk_aclk_cores, - &clk_aclk_corem1, - &clk_periphclk, - &clk_mout_corebus, - &clk_sclk_dmc, - &clk_aclk_cored, - &clk_aclk_corep, - &clk_aclk_acp, - &clk_pclk_acp, - &clk_vpllsrc, - &clk_sclk_vpll, - &clk_aclk_200, - &clk_aclk_100, - &clk_aclk_160, - &clk_aclk_133, - &clk_dout_mmc0, - &clk_dout_mmc1, - &clk_dout_mmc2, - &clk_dout_mmc3, - &clk_dout_mmc4, - &clk_mout_mfc0, - &clk_mout_mfc1, -}; - -static struct clk *clk_cdev[] = { - &clk_pdma0, - &clk_pdma1, -}; - -static struct clksrc_clk *clksrc_cdev[] = { - &clk_sclk_uart0, - &clk_sclk_uart1, - &clk_sclk_uart2, - &clk_sclk_uart3, - &clk_sclk_mmc0, - &clk_sclk_mmc1, - &clk_sclk_mmc2, - &clk_sclk_mmc3, - &clk_sclk_spi0, - &clk_sclk_spi1, - &clk_sclk_spi2, - -}; - -static struct clk_lookup exynos4_clk_lookup[] = { - CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &clk_sclk_uart0.clk), - CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &clk_sclk_uart1.clk), - CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &clk_sclk_uart2.clk), - CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &clk_sclk_uart3.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), - CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk), - CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0), - CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &clk_sclk_spi0.clk), - CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &clk_sclk_spi1.clk), - CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &clk_sclk_spi2.clk), -}; - -static int xtal_rate; - -static unsigned long exynos4_fout_apll_get_rate(struct clk *clk) -{ - if (soc_is_exynos4210()) - return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), - pll_4508); - else if (soc_is_exynos4212() || soc_is_exynos4412()) - return s5p_get_pll35xx(xtal_rate, __raw_readl(S5P_APLL_CON0)); - else - return 0; -} - -static struct clk_ops exynos4_fout_apll_ops = { - .get_rate = exynos4_fout_apll_get_rate, -}; - -static u32 vpll_div[][8] = { - { 54000000, 3, 53, 3, 1024, 0, 17, 0 }, - { 108000000, 3, 53, 2, 1024, 0, 17, 0 }, -}; - -static unsigned long exynos4_vpll_get_rate(struct clk *clk) -{ - return clk->rate; -} - -static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int vpll_con0, vpll_con1 = 0; - unsigned int i; - - /* Return if nothing changed */ - if (clk->rate == rate) - return 0; - - vpll_con0 = __raw_readl(S5P_VPLL_CON0); - vpll_con0 &= ~(0x1 << 27 | \ - PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \ - PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \ - PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT); - - vpll_con1 = __raw_readl(S5P_VPLL_CON1); - vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT | \ - PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT | \ - PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT); - - for (i = 0; i < ARRAY_SIZE(vpll_div); i++) { - if (vpll_div[i][0] == rate) { - vpll_con0 |= vpll_div[i][1] << PLL46XX_PDIV_SHIFT; - vpll_con0 |= vpll_div[i][2] << PLL46XX_MDIV_SHIFT; - vpll_con0 |= vpll_div[i][3] << PLL46XX_SDIV_SHIFT; - vpll_con1 |= vpll_div[i][4] << PLL46XX_KDIV_SHIFT; - vpll_con1 |= vpll_div[i][5] << PLL46XX_MFR_SHIFT; - vpll_con1 |= vpll_div[i][6] << PLL46XX_MRR_SHIFT; - vpll_con0 |= vpll_div[i][7] << 27; - break; - } - } - - if (i == ARRAY_SIZE(vpll_div)) { - printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n", - __func__); - return -EINVAL; - } - - __raw_writel(vpll_con0, S5P_VPLL_CON0); - __raw_writel(vpll_con1, S5P_VPLL_CON1); - - /* Wait for VPLL lock */ - while (!(__raw_readl(S5P_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT))) - continue; - - clk->rate = rate; - return 0; -} - -static struct clk_ops exynos4_vpll_ops = { - .get_rate = exynos4_vpll_get_rate, - .set_rate = exynos4_vpll_set_rate, -}; - -void __init_or_cpufreq exynos4_setup_clocks(void) -{ - struct clk *xtal_clk; - unsigned long apll = 0; - unsigned long mpll = 0; - unsigned long epll = 0; - unsigned long vpll = 0; - unsigned long vpllsrc; - unsigned long xtal; - unsigned long armclk; - unsigned long sclk_dmc; - unsigned long aclk_200; - unsigned long aclk_100; - unsigned long aclk_160; - unsigned long aclk_133; - unsigned int ptr; - - printk(KERN_DEBUG "%s: registering clocks\n", __func__); - - xtal_clk = clk_get(NULL, "xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - - xtal_rate = xtal; - - clk_put(xtal_clk); - - printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - - if (soc_is_exynos4210()) { - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), - pll_4508); - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), - pll_4508); - epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0), - __raw_readl(S5P_EPLL_CON1), pll_4600); - - vpllsrc = clk_get_rate(&clk_vpllsrc.clk); - vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), - __raw_readl(S5P_VPLL_CON1), pll_4650c); - } else if (soc_is_exynos4212() || soc_is_exynos4412()) { - apll = s5p_get_pll35xx(xtal, __raw_readl(S5P_APLL_CON0)); - mpll = s5p_get_pll35xx(xtal, __raw_readl(S5P_MPLL_CON0)); - epll = s5p_get_pll36xx(xtal, __raw_readl(S5P_EPLL_CON0), - __raw_readl(S5P_EPLL_CON1)); - - vpllsrc = clk_get_rate(&clk_vpllsrc.clk); - vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), - __raw_readl(S5P_VPLL_CON1)); - } else { - /* nothing */ - } - - clk_fout_apll.ops = &exynos4_fout_apll_ops; - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - clk_fout_vpll.ops = &exynos4_vpll_ops; - clk_fout_vpll.rate = vpll; - - printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld", - apll, mpll, epll, vpll); - - armclk = clk_get_rate(&clk_armclk.clk); - sclk_dmc = clk_get_rate(&clk_sclk_dmc.clk); - - aclk_200 = clk_get_rate(&clk_aclk_200.clk); - aclk_100 = clk_get_rate(&clk_aclk_100.clk); - aclk_160 = clk_get_rate(&clk_aclk_160.clk); - aclk_133 = clk_get_rate(&clk_aclk_133.clk); - - printk(KERN_INFO "EXYNOS4: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n" - "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n", - armclk, sclk_dmc, aclk_200, - aclk_100, aclk_160, aclk_133); - - clk_f.rate = armclk; - clk_h.rate = sclk_dmc; - clk_p.rate = aclk_100; - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); -} - -static struct clk *clks[] __initdata = { - &clk_sclk_hdmi27m, - &clk_sclk_hdmiphy, - &clk_sclk_usbphy0, - &clk_sclk_usbphy1, -}; - -#ifdef CONFIG_PM_SLEEP -static int exynos4_clock_suspend(void) -{ - s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save)); - return 0; -} - -static void exynos4_clock_resume(void) -{ - s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save)); -} - -#else -#define exynos4_clock_suspend NULL -#define exynos4_clock_resume NULL -#endif - -struct syscore_ops exynos4_clock_syscore_ops = { - .suspend = exynos4_clock_suspend, - .resume = exynos4_clock_resume, -}; - -void __init exynos4_register_clocks(void) -{ - int ptr; - - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) - s3c_register_clksrc(sysclks[ptr], 1); - - for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++) - s3c_register_clksrc(sclk_tv[ptr], 1); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) - s3c_register_clksrc(clksrc_cdev[ptr], 1); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); - for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++) - s3c_disable_clocks(clk_cdev[ptr], 1); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup)); - - register_syscore_ops(&exynos4_clock_syscore_ops); - s3c24xx_register_clock(&dummy_apb_pclk); - - s3c_pwmclk_init(); -} diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 93fa2d532e4a..f494db872c67 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -661,7 +661,7 @@ static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) chained_irq_exit(chip, desc); } -int __init exynos4_init_irq_eint(void) +static int __init exynos4_init_irq_eint(void) { int irq; diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 1ac49de0f398..8c1efe692c20 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -15,12 +15,21 @@ void exynos_init_io(struct map_desc *mach_desc, int size); void exynos4_init_irq(void); +#ifdef CONFIG_ARCH_EXYNOS4 void exynos4_register_clocks(void); void exynos4_setup_clocks(void); void exynos4210_register_clocks(void); void exynos4212_register_clocks(void); +#else +#define exynos4_register_clocks() +#define exynos4_setup_clocks() + +#define exynos4210_register_clocks() +#define exynos4212_register_clocks() +#endif + void exynos4_restart(char mode, const char *cmd); extern struct sys_timer exynos4_timer; diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c index 91370def4a70..25f3ef2c36e5 100644 --- a/arch/arm/mach-exynos/dma.c +++ b/arch/arm/mach-exynos/dma.c @@ -36,7 +36,7 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -u8 pdma0_peri[] = { +static u8 pdma0_peri[] = { DMACH_PCM0_RX, DMACH_PCM0_TX, DMACH_PCM2_RX, @@ -69,15 +69,15 @@ u8 pdma0_peri[] = { DMACH_AC97_PCMOUT, }; -struct dma_pl330_platdata exynos4_pdma0_pdata = { +static struct dma_pl330_platdata exynos4_pdma0_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma0_peri), .peri_id = pdma0_peri, }; -AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330, EXYNOS4_PA_PDMA0, - {IRQ_PDMA0}, &exynos4_pdma0_pdata); +static AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330, + EXYNOS4_PA_PDMA0, {IRQ_PDMA0}, &exynos4_pdma0_pdata); -u8 pdma1_peri[] = { +static u8 pdma1_peri[] = { DMACH_PCM0_RX, DMACH_PCM0_TX, DMACH_PCM1_RX, @@ -105,13 +105,13 @@ u8 pdma1_peri[] = { DMACH_SLIMBUS5_TX, }; -struct dma_pl330_platdata exynos4_pdma1_pdata = { +static struct dma_pl330_platdata exynos4_pdma1_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma1_peri), .peri_id = pdma1_peri, }; -AMBA_AHB_DEVICE(exynos4_pdma1, "dma-pl330.1", 0x00041330, EXYNOS4_PA_PDMA1, - {IRQ_PDMA1}, &exynos4_pdma1_pdata); +static AMBA_AHB_DEVICE(exynos4_pdma1, "dma-pl330.1", 0x00041330, + EXYNOS4_PA_PDMA1, {IRQ_PDMA1}, &exynos4_pdma1_pdata); static int __init exynos4_dma_init(void) { diff --git a/arch/arm/mach-exynos/include/mach/exynos4-clock.h b/arch/arm/mach-exynos/include/mach/exynos4-clock.h deleted file mode 100644 index a07fcbf55251..000000000000 --- a/arch/arm/mach-exynos/include/mach/exynos4-clock.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/include/mach/exynos4-clock.h - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Header file for exynos4 clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_CLOCK_H -#define __ASM_ARCH_CLOCK_H __FILE__ - -#include <linux/clk.h> - -extern struct clk clk_sclk_hdmi27m; -extern struct clk clk_sclk_usbphy0; -extern struct clk clk_sclk_usbphy1; -extern struct clk clk_sclk_hdmiphy; - -extern struct clksrc_clk clk_sclk_apll; -extern struct clksrc_clk clk_mout_mpll; -extern struct clksrc_clk clk_aclk_133; -extern struct clksrc_clk clk_mout_epll; -extern struct clksrc_clk clk_sclk_vpll; - -extern struct clk *clkset_corebus_list[]; -extern struct clksrc_sources clkset_mout_corebus; - -extern struct clk *clkset_aclk_top_list[]; -extern struct clksrc_sources clkset_aclk; - -extern struct clk *clkset_group_list[]; -extern struct clksrc_sources clkset_group; - -extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable); -extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable); -extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable); - -#endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h index 6c37ebe94829..1e4abd64a547 100644 --- a/arch/arm/mach-exynos/include/mach/regs-clock.h +++ b/arch/arm/mach-exynos/include/mach/regs-clock.h @@ -16,195 +16,247 @@ #include <plat/cpu.h> #include <mach/map.h> -#define S5P_CLKREG(x) (S5P_VA_CMU + (x)) - -#define S5P_CLKDIV_LEFTBUS S5P_CLKREG(0x04500) -#define S5P_CLKDIV_STAT_LEFTBUS S5P_CLKREG(0x04600) -#define S5P_CLKGATE_IP_LEFTBUS S5P_CLKREG(0x04800) - -#define S5P_CLKDIV_RIGHTBUS S5P_CLKREG(0x08500) -#define S5P_CLKDIV_STAT_RIGHTBUS S5P_CLKREG(0x08600) -#define S5P_CLKGATE_IP_RIGHTBUS S5P_CLKREG(0x08800) - -#define S5P_EPLL_LOCK S5P_CLKREG(0x0C010) -#define S5P_VPLL_LOCK S5P_CLKREG(0x0C020) - -#define S5P_EPLL_CON0 S5P_CLKREG(0x0C110) -#define S5P_EPLL_CON1 S5P_CLKREG(0x0C114) -#define S5P_VPLL_CON0 S5P_CLKREG(0x0C120) -#define S5P_VPLL_CON1 S5P_CLKREG(0x0C124) - -#define S5P_CLKSRC_TOP0 S5P_CLKREG(0x0C210) -#define S5P_CLKSRC_TOP1 S5P_CLKREG(0x0C214) -#define S5P_CLKSRC_CAM S5P_CLKREG(0x0C220) -#define S5P_CLKSRC_TV S5P_CLKREG(0x0C224) -#define S5P_CLKSRC_MFC S5P_CLKREG(0x0C228) -#define S5P_CLKSRC_G3D S5P_CLKREG(0x0C22C) -#define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230) -#define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234) -#define S5P_CLKSRC_MAUDIO S5P_CLKREG(0x0C23C) -#define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240) -#define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250) -#define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254) - -#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310) -#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320) -#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324) -#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334) -#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C) -#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340) -#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350) -#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354) - -#define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510) -#define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520) -#define S5P_CLKDIV_TV S5P_CLKREG(0x0C524) -#define S5P_CLKDIV_MFC S5P_CLKREG(0x0C528) -#define S5P_CLKDIV_G3D S5P_CLKREG(0x0C52C) -#define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530) -#define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534) -#define S5P_CLKDIV_MAUDIO S5P_CLKREG(0x0C53C) -#define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540) -#define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544) -#define S5P_CLKDIV_FSYS2 S5P_CLKREG(0x0C548) -#define S5P_CLKDIV_FSYS3 S5P_CLKREG(0x0C54C) -#define S5P_CLKDIV_PERIL0 S5P_CLKREG(0x0C550) -#define S5P_CLKDIV_PERIL1 S5P_CLKREG(0x0C554) -#define S5P_CLKDIV_PERIL2 S5P_CLKREG(0x0C558) -#define S5P_CLKDIV_PERIL3 S5P_CLKREG(0x0C55C) -#define S5P_CLKDIV_PERIL4 S5P_CLKREG(0x0C560) -#define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564) -#define S5P_CLKDIV2_RATIO S5P_CLKREG(0x0C580) - -#define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610) - -#define S5P_CLKGATE_SCLKCAM S5P_CLKREG(0x0C820) -#define S5P_CLKGATE_IP_CAM S5P_CLKREG(0x0C920) -#define S5P_CLKGATE_IP_TV S5P_CLKREG(0x0C924) -#define S5P_CLKGATE_IP_MFC S5P_CLKREG(0x0C928) -#define S5P_CLKGATE_IP_G3D S5P_CLKREG(0x0C92C) -#define S5P_CLKGATE_IP_IMAGE (soc_is_exynos4210() ? \ - S5P_CLKREG(0x0C930) : \ - S5P_CLKREG(0x04930)) -#define S5P_CLKGATE_IP_IMAGE_4210 S5P_CLKREG(0x0C930) -#define S5P_CLKGATE_IP_IMAGE_4212 S5P_CLKREG(0x04930) -#define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934) -#define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940) -#define S5P_CLKGATE_IP_GPS S5P_CLKREG(0x0C94C) -#define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950) -#define S5P_CLKGATE_IP_PERIR (soc_is_exynos4210() ? \ - S5P_CLKREG(0x0C960) : \ - S5P_CLKREG(0x08960)) -#define S5P_CLKGATE_IP_PERIR_4210 S5P_CLKREG(0x0C960) -#define S5P_CLKGATE_IP_PERIR_4212 S5P_CLKREG(0x08960) -#define S5P_CLKGATE_BLOCK S5P_CLKREG(0x0C970) - -#define S5P_CLKSRC_MASK_DMC S5P_CLKREG(0x10300) -#define S5P_CLKSRC_DMC S5P_CLKREG(0x10200) -#define S5P_CLKDIV_DMC0 S5P_CLKREG(0x10500) -#define S5P_CLKDIV_DMC1 S5P_CLKREG(0x10504) -#define S5P_CLKDIV_STAT_DMC0 S5P_CLKREG(0x10600) -#define S5P_CLKGATE_IP_DMC S5P_CLKREG(0x10900) - -#define S5P_APLL_LOCK S5P_CLKREG(0x14000) -#define S5P_MPLL_LOCK (soc_is_exynos4210() ? \ - S5P_CLKREG(0x14004) : \ - S5P_CLKREG(0x10008)) -#define S5P_APLL_CON0 S5P_CLKREG(0x14100) -#define S5P_APLL_CON1 S5P_CLKREG(0x14104) -#define S5P_MPLL_CON0 (soc_is_exynos4210() ? \ - S5P_CLKREG(0x14108) : \ - S5P_CLKREG(0x10108)) -#define S5P_MPLL_CON1 (soc_is_exynos4210() ? \ - S5P_CLKREG(0x1410C) : \ - S5P_CLKREG(0x1010C)) - -#define S5P_CLKSRC_CPU S5P_CLKREG(0x14200) -#define S5P_CLKMUX_STATCPU S5P_CLKREG(0x14400) - -#define S5P_CLKDIV_CPU S5P_CLKREG(0x14500) -#define S5P_CLKDIV_CPU1 S5P_CLKREG(0x14504) -#define S5P_CLKDIV_STATCPU S5P_CLKREG(0x14600) -#define S5P_CLKDIV_STATCPU1 S5P_CLKREG(0x14604) - -#define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x14800) -#define S5P_CLKGATE_IP_CPU S5P_CLKREG(0x14900) - -#define S5P_APLL_LOCKTIME (0x1C20) /* 300us */ - -#define S5P_APLLCON0_ENABLE_SHIFT (31) -#define S5P_APLLCON0_LOCKED_SHIFT (29) -#define S5P_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1) -#define S5P_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1) - -#define S5P_EPLLCON0_ENABLE_SHIFT (31) -#define S5P_EPLLCON0_LOCKED_SHIFT (29) - -#define S5P_VPLLCON0_ENABLE_SHIFT (31) -#define S5P_VPLLCON0_LOCKED_SHIFT (29) - -#define S5P_CLKSRC_CPU_MUXCORE_SHIFT (16) -#define S5P_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << S5P_CLKSRC_CPU_MUXCORE_SHIFT) - -#define S5P_CLKDIV_CPU0_CORE_SHIFT (0) -#define S5P_CLKDIV_CPU0_CORE_MASK (0x7 << S5P_CLKDIV_CPU0_CORE_SHIFT) -#define S5P_CLKDIV_CPU0_COREM0_SHIFT (4) -#define S5P_CLKDIV_CPU0_COREM0_MASK (0x7 << S5P_CLKDIV_CPU0_COREM0_SHIFT) -#define S5P_CLKDIV_CPU0_COREM1_SHIFT (8) -#define S5P_CLKDIV_CPU0_COREM1_MASK (0x7 << S5P_CLKDIV_CPU0_COREM1_SHIFT) -#define S5P_CLKDIV_CPU0_PERIPH_SHIFT (12) -#define S5P_CLKDIV_CPU0_PERIPH_MASK (0x7 << S5P_CLKDIV_CPU0_PERIPH_SHIFT) -#define S5P_CLKDIV_CPU0_ATB_SHIFT (16) -#define S5P_CLKDIV_CPU0_ATB_MASK (0x7 << S5P_CLKDIV_CPU0_ATB_SHIFT) -#define S5P_CLKDIV_CPU0_PCLKDBG_SHIFT (20) -#define S5P_CLKDIV_CPU0_PCLKDBG_MASK (0x7 << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) -#define S5P_CLKDIV_CPU0_APLL_SHIFT (24) -#define S5P_CLKDIV_CPU0_APLL_MASK (0x7 << S5P_CLKDIV_CPU0_APLL_SHIFT) - -#define S5P_CLKDIV_DMC0_ACP_SHIFT (0) -#define S5P_CLKDIV_DMC0_ACP_MASK (0x7 << S5P_CLKDIV_DMC0_ACP_SHIFT) -#define S5P_CLKDIV_DMC0_ACPPCLK_SHIFT (4) -#define S5P_CLKDIV_DMC0_ACPPCLK_MASK (0x7 << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) -#define S5P_CLKDIV_DMC0_DPHY_SHIFT (8) -#define S5P_CLKDIV_DMC0_DPHY_MASK (0x7 << S5P_CLKDIV_DMC0_DPHY_SHIFT) -#define S5P_CLKDIV_DMC0_DMC_SHIFT (12) -#define S5P_CLKDIV_DMC0_DMC_MASK (0x7 << S5P_CLKDIV_DMC0_DMC_SHIFT) -#define S5P_CLKDIV_DMC0_DMCD_SHIFT (16) -#define S5P_CLKDIV_DMC0_DMCD_MASK (0x7 << S5P_CLKDIV_DMC0_DMCD_SHIFT) -#define S5P_CLKDIV_DMC0_DMCP_SHIFT (20) -#define S5P_CLKDIV_DMC0_DMCP_MASK (0x7 << S5P_CLKDIV_DMC0_DMCP_SHIFT) -#define S5P_CLKDIV_DMC0_COPY2_SHIFT (24) -#define S5P_CLKDIV_DMC0_COPY2_MASK (0x7 << S5P_CLKDIV_DMC0_COPY2_SHIFT) -#define S5P_CLKDIV_DMC0_CORETI_SHIFT (28) -#define S5P_CLKDIV_DMC0_CORETI_MASK (0x7 << S5P_CLKDIV_DMC0_CORETI_SHIFT) - -#define S5P_CLKDIV_TOP_ACLK200_SHIFT (0) -#define S5P_CLKDIV_TOP_ACLK200_MASK (0x7 << S5P_CLKDIV_TOP_ACLK200_SHIFT) -#define S5P_CLKDIV_TOP_ACLK100_SHIFT (4) -#define S5P_CLKDIV_TOP_ACLK100_MASK (0xf << S5P_CLKDIV_TOP_ACLK100_SHIFT) -#define S5P_CLKDIV_TOP_ACLK160_SHIFT (8) -#define S5P_CLKDIV_TOP_ACLK160_MASK (0x7 << S5P_CLKDIV_TOP_ACLK160_SHIFT) -#define S5P_CLKDIV_TOP_ACLK133_SHIFT (12) -#define S5P_CLKDIV_TOP_ACLK133_MASK (0x7 << S5P_CLKDIV_TOP_ACLK133_SHIFT) -#define S5P_CLKDIV_TOP_ONENAND_SHIFT (16) -#define S5P_CLKDIV_TOP_ONENAND_MASK (0x7 << S5P_CLKDIV_TOP_ONENAND_SHIFT) - -#define S5P_CLKDIV_BUS_GDLR_SHIFT (0) -#define S5P_CLKDIV_BUS_GDLR_MASK (0x7 << S5P_CLKDIV_BUS_GDLR_SHIFT) -#define S5P_CLKDIV_BUS_GPLR_SHIFT (4) -#define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT) +#define EXYNOS_CLKREG(x) (S5P_VA_CMU + (x)) + +#define EXYNOS4_CLKDIV_LEFTBUS EXYNOS_CLKREG(0x04500) +#define EXYNOS4_CLKDIV_STAT_LEFTBUS EXYNOS_CLKREG(0x04600) +#define EXYNOS4_CLKGATE_IP_LEFTBUS EXYNOS_CLKREG(0x04800) + +#define EXYNOS4_CLKDIV_RIGHTBUS EXYNOS_CLKREG(0x08500) +#define EXYNOS4_CLKDIV_STAT_RIGHTBUS EXYNOS_CLKREG(0x08600) +#define EXYNOS4_CLKGATE_IP_RIGHTBUS EXYNOS_CLKREG(0x08800) + +#define EXYNOS4_EPLL_LOCK EXYNOS_CLKREG(0x0C010) +#define EXYNOS4_VPLL_LOCK EXYNOS_CLKREG(0x0C020) + +#define EXYNOS4_EPLL_CON0 EXYNOS_CLKREG(0x0C110) +#define EXYNOS4_EPLL_CON1 EXYNOS_CLKREG(0x0C114) +#define EXYNOS4_VPLL_CON0 EXYNOS_CLKREG(0x0C120) +#define EXYNOS4_VPLL_CON1 EXYNOS_CLKREG(0x0C124) + +#define EXYNOS4_CLKSRC_TOP0 EXYNOS_CLKREG(0x0C210) +#define EXYNOS4_CLKSRC_TOP1 EXYNOS_CLKREG(0x0C214) +#define EXYNOS4_CLKSRC_CAM EXYNOS_CLKREG(0x0C220) +#define EXYNOS4_CLKSRC_TV EXYNOS_CLKREG(0x0C224) +#define EXYNOS4_CLKSRC_MFC EXYNOS_CLKREG(0x0C228) +#define EXYNOS4_CLKSRC_G3D EXYNOS_CLKREG(0x0C22C) +#define EXYNOS4_CLKSRC_IMAGE EXYNOS_CLKREG(0x0C230) +#define EXYNOS4_CLKSRC_LCD0 EXYNOS_CLKREG(0x0C234) +#define EXYNOS4_CLKSRC_MAUDIO EXYNOS_CLKREG(0x0C23C) +#define EXYNOS4_CLKSRC_FSYS EXYNOS_CLKREG(0x0C240) +#define EXYNOS4_CLKSRC_PERIL0 EXYNOS_CLKREG(0x0C250) +#define EXYNOS4_CLKSRC_PERIL1 EXYNOS_CLKREG(0x0C254) + +#define EXYNOS4_CLKSRC_MASK_TOP EXYNOS_CLKREG(0x0C310) +#define EXYNOS4_CLKSRC_MASK_CAM EXYNOS_CLKREG(0x0C320) +#define EXYNOS4_CLKSRC_MASK_TV EXYNOS_CLKREG(0x0C324) +#define EXYNOS4_CLKSRC_MASK_LCD0 EXYNOS_CLKREG(0x0C334) +#define EXYNOS4_CLKSRC_MASK_MAUDIO EXYNOS_CLKREG(0x0C33C) +#define EXYNOS4_CLKSRC_MASK_FSYS EXYNOS_CLKREG(0x0C340) +#define EXYNOS4_CLKSRC_MASK_PERIL0 EXYNOS_CLKREG(0x0C350) +#define EXYNOS4_CLKSRC_MASK_PERIL1 EXYNOS_CLKREG(0x0C354) + +#define EXYNOS4_CLKDIV_TOP EXYNOS_CLKREG(0x0C510) +#define EXYNOS4_CLKDIV_CAM EXYNOS_CLKREG(0x0C520) +#define EXYNOS4_CLKDIV_TV EXYNOS_CLKREG(0x0C524) +#define EXYNOS4_CLKDIV_MFC EXYNOS_CLKREG(0x0C528) +#define EXYNOS4_CLKDIV_G3D EXYNOS_CLKREG(0x0C52C) +#define EXYNOS4_CLKDIV_IMAGE EXYNOS_CLKREG(0x0C530) +#define EXYNOS4_CLKDIV_LCD0 EXYNOS_CLKREG(0x0C534) +#define EXYNOS4_CLKDIV_MAUDIO EXYNOS_CLKREG(0x0C53C) +#define EXYNOS4_CLKDIV_FSYS0 EXYNOS_CLKREG(0x0C540) +#define EXYNOS4_CLKDIV_FSYS1 EXYNOS_CLKREG(0x0C544) +#define EXYNOS4_CLKDIV_FSYS2 EXYNOS_CLKREG(0x0C548) +#define EXYNOS4_CLKDIV_FSYS3 EXYNOS_CLKREG(0x0C54C) +#define EXYNOS4_CLKDIV_PERIL0 EXYNOS_CLKREG(0x0C550) +#define EXYNOS4_CLKDIV_PERIL1 EXYNOS_CLKREG(0x0C554) +#define EXYNOS4_CLKDIV_PERIL2 EXYNOS_CLKREG(0x0C558) +#define EXYNOS4_CLKDIV_PERIL3 EXYNOS_CLKREG(0x0C55C) +#define EXYNOS4_CLKDIV_PERIL4 EXYNOS_CLKREG(0x0C560) +#define EXYNOS4_CLKDIV_PERIL5 EXYNOS_CLKREG(0x0C564) +#define EXYNOS4_CLKDIV2_RATIO EXYNOS_CLKREG(0x0C580) + +#define EXYNOS4_CLKDIV_STAT_TOP EXYNOS_CLKREG(0x0C610) +#define EXYNOS4_CLKDIV_STAT_MFC EXYNOS_CLKREG(0x0C628) + +#define EXYNOS4_CLKGATE_SCLKCAM EXYNOS_CLKREG(0x0C820) +#define EXYNOS4_CLKGATE_IP_CAM EXYNOS_CLKREG(0x0C920) +#define EXYNOS4_CLKGATE_IP_TV EXYNOS_CLKREG(0x0C924) +#define EXYNOS4_CLKGATE_IP_MFC EXYNOS_CLKREG(0x0C928) +#define EXYNOS4_CLKGATE_IP_G3D EXYNOS_CLKREG(0x0C92C) +#define EXYNOS4_CLKGATE_IP_IMAGE (soc_is_exynos4210() ? \ + EXYNOS_CLKREG(0x0C930) : \ + EXYNOS_CLKREG(0x04930)) +#define EXYNOS4210_CLKGATE_IP_IMAGE EXYNOS_CLKREG(0x0C930) +#define EXYNOS4212_CLKGATE_IP_IMAGE EXYNOS_CLKREG(0x04930) +#define EXYNOS4_CLKGATE_IP_LCD0 EXYNOS_CLKREG(0x0C934) +#define EXYNOS4_CLKGATE_IP_FSYS EXYNOS_CLKREG(0x0C940) +#define EXYNOS4_CLKGATE_IP_GPS EXYNOS_CLKREG(0x0C94C) +#define EXYNOS4_CLKGATE_IP_PERIL EXYNOS_CLKREG(0x0C950) +#define EXYNOS4_CLKGATE_IP_PERIR (soc_is_exynos4210() ? \ + EXYNOS_CLKREG(0x0C960) : \ + EXYNOS_CLKREG(0x08960)) +#define EXYNOS4210_CLKGATE_IP_PERIR EXYNOS_CLKREG(0x0C960) +#define EXYNOS4212_CLKGATE_IP_PERIR EXYNOS_CLKREG(0x08960) +#define EXYNOS4_CLKGATE_BLOCK EXYNOS_CLKREG(0x0C970) + +#define EXYNOS4_CLKSRC_MASK_DMC EXYNOS_CLKREG(0x10300) +#define EXYNOS4_CLKSRC_DMC EXYNOS_CLKREG(0x10200) +#define EXYNOS4_CLKDIV_DMC0 EXYNOS_CLKREG(0x10500) +#define EXYNOS4_CLKDIV_DMC1 EXYNOS_CLKREG(0x10504) +#define EXYNOS4_CLKDIV_STAT_DMC0 EXYNOS_CLKREG(0x10600) +#define EXYNOS4_CLKDIV_STAT_DMC1 EXYNOS_CLKREG(0x10604) +#define EXYNOS4_CLKGATE_IP_DMC EXYNOS_CLKREG(0x10900) + +#define EXYNOS4_DMC_PAUSE_CTRL EXYNOS_CLKREG(0x11094) +#define EXYNOS4_DMC_PAUSE_ENABLE (1 << 0) + +#define EXYNOS4_APLL_LOCK EXYNOS_CLKREG(0x14000) +#define EXYNOS4_MPLL_LOCK (soc_is_exynos4210() ? \ + EXYNOS_CLKREG(0x14004) : \ + EXYNOS_CLKREG(0x10008)) +#define EXYNOS4_APLL_CON0 EXYNOS_CLKREG(0x14100) +#define EXYNOS4_APLL_CON1 EXYNOS_CLKREG(0x14104) +#define EXYNOS4_MPLL_CON0 (soc_is_exynos4210() ? \ + EXYNOS_CLKREG(0x14108) : \ + EXYNOS_CLKREG(0x10108)) +#define EXYNOS4_MPLL_CON1 (soc_is_exynos4210() ? \ + EXYNOS_CLKREG(0x1410C) : \ + EXYNOS_CLKREG(0x1010C)) + +#define EXYNOS4_CLKSRC_CPU EXYNOS_CLKREG(0x14200) +#define EXYNOS4_CLKMUX_STATCPU EXYNOS_CLKREG(0x14400) + +#define EXYNOS4_CLKDIV_CPU EXYNOS_CLKREG(0x14500) +#define EXYNOS4_CLKDIV_CPU1 EXYNOS_CLKREG(0x14504) +#define EXYNOS4_CLKDIV_STATCPU EXYNOS_CLKREG(0x14600) +#define EXYNOS4_CLKDIV_STATCPU1 EXYNOS_CLKREG(0x14604) + +#define EXYNOS4_CLKGATE_SCLKCPU EXYNOS_CLKREG(0x14800) +#define EXYNOS4_CLKGATE_IP_CPU EXYNOS_CLKREG(0x14900) + +#define EXYNOS4_APLL_LOCKTIME (0x1C20) /* 300us */ + +#define EXYNOS4_APLLCON0_ENABLE_SHIFT (31) +#define EXYNOS4_APLLCON0_LOCKED_SHIFT (29) +#define EXYNOS4_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1) +#define EXYNOS4_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1) + +#define EXYNOS4_EPLLCON0_ENABLE_SHIFT (31) +#define EXYNOS4_EPLLCON0_LOCKED_SHIFT (29) + +#define EXYNOS4_VPLLCON0_ENABLE_SHIFT (31) +#define EXYNOS4_VPLLCON0_LOCKED_SHIFT (29) + +#define EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT (16) +#define EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT) + +#define EXYNOS4_CLKDIV_CPU0_CORE_SHIFT (0) +#define EXYNOS4_CLKDIV_CPU0_CORE_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_CORE_SHIFT) +#define EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT (4) +#define EXYNOS4_CLKDIV_CPU0_COREM0_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT) +#define EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT (8) +#define EXYNOS4_CLKDIV_CPU0_COREM1_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT) +#define EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT (12) +#define EXYNOS4_CLKDIV_CPU0_PERIPH_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT) +#define EXYNOS4_CLKDIV_CPU0_ATB_SHIFT (16) +#define EXYNOS4_CLKDIV_CPU0_ATB_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_ATB_SHIFT) +#define EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT (20) +#define EXYNOS4_CLKDIV_CPU0_PCLKDBG_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT) +#define EXYNOS4_CLKDIV_CPU0_APLL_SHIFT (24) +#define EXYNOS4_CLKDIV_CPU0_APLL_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_APLL_SHIFT) +#define EXYNOS4_CLKDIV_CPU0_CORE2_SHIFT 28 +#define EXYNOS4_CLKDIV_CPU0_CORE2_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_CORE2_SHIFT) + +#define EXYNOS4_CLKDIV_CPU1_COPY_SHIFT 0 +#define EXYNOS4_CLKDIV_CPU1_COPY_MASK (0x7 << EXYNOS4_CLKDIV_CPU1_COPY_SHIFT) +#define EXYNOS4_CLKDIV_CPU1_HPM_SHIFT 4 +#define EXYNOS4_CLKDIV_CPU1_HPM_MASK (0x7 << EXYNOS4_CLKDIV_CPU1_HPM_SHIFT) +#define EXYNOS4_CLKDIV_CPU1_CORES_SHIFT 8 +#define EXYNOS4_CLKDIV_CPU1_CORES_MASK (0x7 << EXYNOS4_CLKDIV_CPU1_CORES_SHIFT) + +#define EXYNOS4_CLKDIV_DMC0_ACP_SHIFT (0) +#define EXYNOS4_CLKDIV_DMC0_ACP_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) +#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT (4) +#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) +#define EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT (8) +#define EXYNOS4_CLKDIV_DMC0_DPHY_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) +#define EXYNOS4_CLKDIV_DMC0_DMC_SHIFT (12) +#define EXYNOS4_CLKDIV_DMC0_DMC_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) +#define EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT (16) +#define EXYNOS4_CLKDIV_DMC0_DMCD_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) +#define EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT (20) +#define EXYNOS4_CLKDIV_DMC0_DMCP_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT) +#define EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT (24) +#define EXYNOS4_CLKDIV_DMC0_COPY2_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT) +#define EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT (28) +#define EXYNOS4_CLKDIV_DMC0_CORETI_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT) + +#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT (0) +#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK (0xf << EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT) +#define EXYNOS4_CLKDIV_DMC1_C2C_SHIFT (4) +#define EXYNOS4_CLKDIV_DMC1_C2C_MASK (0x7 << EXYNOS4_CLKDIV_DMC1_C2C_SHIFT) +#define EXYNOS4_CLKDIV_DMC1_PWI_SHIFT (8) +#define EXYNOS4_CLKDIV_DMC1_PWI_MASK (0xf << EXYNOS4_CLKDIV_DMC1_PWI_SHIFT) +#define EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT (12) +#define EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK (0x7 << EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT) +#define EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT (16) +#define EXYNOS4_CLKDIV_DMC1_DVSEM_MASK (0x7f << EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT) +#define EXYNOS4_CLKDIV_DMC1_DPM_SHIFT (24) +#define EXYNOS4_CLKDIV_DMC1_DPM_MASK (0x7f << EXYNOS4_CLKDIV_DMC1_DPM_SHIFT) + +#define EXYNOS4_CLKDIV_MFC_SHIFT (0) +#define EXYNOS4_CLKDIV_MFC_MASK (0x7 << EXYNOS4_CLKDIV_MFC_SHIFT) + +#define EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT (0) +#define EXYNOS4_CLKDIV_TOP_ACLK200_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT) +#define EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT (4) +#define EXYNOS4_CLKDIV_TOP_ACLK100_MASK (0xF << EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) +#define EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT (8) +#define EXYNOS4_CLKDIV_TOP_ACLK160_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) +#define EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT (12) +#define EXYNOS4_CLKDIV_TOP_ACLK133_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) +#define EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT (16) +#define EXYNOS4_CLKDIV_TOP_ONENAND_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT) +#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT (20) +#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT) +#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT (24) +#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT) + +#define EXYNOS4_CLKDIV_BUS_GDLR_SHIFT (0) +#define EXYNOS4_CLKDIV_BUS_GDLR_MASK (0x7 << EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) +#define EXYNOS4_CLKDIV_BUS_GPLR_SHIFT (4) +#define EXYNOS4_CLKDIV_BUS_GPLR_MASK (0x7 << EXYNOS4_CLKDIV_BUS_GPLR_SHIFT) + +#define EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT (0) +#define EXYNOS4_CLKDIV_CAM_FIMC0_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT) +#define EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT (4) +#define EXYNOS4_CLKDIV_CAM_FIMC1_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT) +#define EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT (8) +#define EXYNOS4_CLKDIV_CAM_FIMC2_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT) +#define EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT (12) +#define EXYNOS4_CLKDIV_CAM_FIMC3_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT) /* Only for EXYNOS4210 */ -#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238) -#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338) -#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538) -#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938) +#define EXYNOS4210_CLKSRC_LCD1 EXYNOS_CLKREG(0x0C238) +#define EXYNOS4210_CLKSRC_MASK_LCD1 EXYNOS_CLKREG(0x0C338) +#define EXYNOS4210_CLKDIV_LCD1 EXYNOS_CLKREG(0x0C538) +#define EXYNOS4210_CLKGATE_IP_LCD1 EXYNOS_CLKREG(0x0C938) + +/* Only for EXYNOS4212 */ + +#define EXYNOS4_CLKDIV_CAM1 EXYNOS_CLKREG(0x0C568) + +#define EXYNOS4_CLKDIV_STAT_CAM1 EXYNOS_CLKREG(0x0C668) + +#define EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT (0) +#define EXYNOS4_CLKDIV_CAM1_JPEG_MASK (0xf << EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT) /* Compatibility defines and inclusion */ #include <mach/regs-pmu.h> -#define S5P_EPLL_CON S5P_EPLL_CON0 +#define S5P_EPLL_CON EXYNOS4_EPLL_CON0 #endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index fa5c4a59b0aa..b4d032d5c878 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -412,7 +412,7 @@ static struct max8997_regulator_data __initdata origen_max8997_regulators[] = { { MAX8997_BUCK7, &max8997_buck7_data }, }; -struct max8997_platform_data __initdata origen_max8997_pdata = { +static struct max8997_platform_data __initdata origen_max8997_pdata = { .num_regulators = ARRAY_SIZE(origen_max8997_regulators), .regulators = origen_max8997_regulators, diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index b2d495b31094..4850700798d0 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -995,7 +995,7 @@ static void __init universal_map_io(void) s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); } -void s5p_tv_setup(void) +static void s5p_tv_setup(void) { /* direct HPD to HDMI chip */ gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"); diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index e19013051772..f105bd2b6765 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -38,29 +38,29 @@ #include <mach/pmu.h> static struct sleep_save exynos4_set_clksrc[] = { - { .reg = S5P_CLKSRC_MASK_TOP , .val = 0x00000001, }, - { .reg = S5P_CLKSRC_MASK_CAM , .val = 0x11111111, }, - { .reg = S5P_CLKSRC_MASK_TV , .val = 0x00000111, }, - { .reg = S5P_CLKSRC_MASK_LCD0 , .val = 0x00001111, }, - { .reg = S5P_CLKSRC_MASK_MAUDIO , .val = 0x00000001, }, - { .reg = S5P_CLKSRC_MASK_FSYS , .val = 0x01011111, }, - { .reg = S5P_CLKSRC_MASK_PERIL0 , .val = 0x01111111, }, - { .reg = S5P_CLKSRC_MASK_PERIL1 , .val = 0x01110111, }, - { .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, }, + { .reg = EXYNOS4_CLKSRC_MASK_TOP , .val = 0x00000001, }, + { .reg = EXYNOS4_CLKSRC_MASK_CAM , .val = 0x11111111, }, + { .reg = EXYNOS4_CLKSRC_MASK_TV , .val = 0x00000111, }, + { .reg = EXYNOS4_CLKSRC_MASK_LCD0 , .val = 0x00001111, }, + { .reg = EXYNOS4_CLKSRC_MASK_MAUDIO , .val = 0x00000001, }, + { .reg = EXYNOS4_CLKSRC_MASK_FSYS , .val = 0x01011111, }, + { .reg = EXYNOS4_CLKSRC_MASK_PERIL0 , .val = 0x01111111, }, + { .reg = EXYNOS4_CLKSRC_MASK_PERIL1 , .val = 0x01110111, }, + { .reg = EXYNOS4_CLKSRC_MASK_DMC , .val = 0x00010000, }, }; static struct sleep_save exynos4210_set_clksrc[] = { - { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, }, + { .reg = EXYNOS4210_CLKSRC_MASK_LCD1 , .val = 0x00001111, }, }; static struct sleep_save exynos4_epll_save[] = { - SAVE_ITEM(S5P_EPLL_CON0), - SAVE_ITEM(S5P_EPLL_CON1), + SAVE_ITEM(EXYNOS4_EPLL_CON0), + SAVE_ITEM(EXYNOS4_EPLL_CON1), }; static struct sleep_save exynos4_vpll_save[] = { - SAVE_ITEM(S5P_VPLL_CON0), - SAVE_ITEM(S5P_VPLL_CON1), + SAVE_ITEM(EXYNOS4_VPLL_CON0), + SAVE_ITEM(EXYNOS4_VPLL_CON1), }; static struct sleep_save exynos4_core_save[] = { @@ -239,7 +239,7 @@ static void exynos4_restore_pll(void) locktime = (3000 / pll_in_rate) * p_div; lockcnt = locktime * 10000 / (10000 / pll_in_rate); - __raw_writel(lockcnt, S5P_EPLL_LOCK); + __raw_writel(lockcnt, EXYNOS4_EPLL_LOCK); s3c_pm_do_restore_core(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save)); @@ -257,7 +257,7 @@ static void exynos4_restore_pll(void) locktime = 750; lockcnt = locktime * 10000 / (10000 / pll_in_rate); - __raw_writel(lockcnt, S5P_VPLL_LOCK); + __raw_writel(lockcnt, EXYNOS4_VPLL_LOCK); s3c_pm_do_restore_core(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save)); @@ -268,14 +268,14 @@ static void exynos4_restore_pll(void) do { if (epll_wait) { - pll_con = __raw_readl(S5P_EPLL_CON0); - if (pll_con & (1 << S5P_EPLLCON0_LOCKED_SHIFT)) + pll_con = __raw_readl(EXYNOS4_EPLL_CON0); + if (pll_con & (1 << EXYNOS4_EPLLCON0_LOCKED_SHIFT)) epll_wait = 0; } if (vpll_wait) { - pll_con = __raw_readl(S5P_VPLL_CON0); - if (pll_con & (1 << S5P_VPLLCON0_LOCKED_SHIFT)) + pll_con = __raw_readl(EXYNOS4_VPLL_CON0); + if (pll_con & (1 << EXYNOS4_VPLLCON0_LOCKED_SHIFT)) vpll_wait = 0; } } while (epll_wait || vpll_wait); diff --git a/arch/arm/mach-imx/clock-imx31.c b/arch/arm/mach-imx/clock-imx31.c index 988a28178d4c..3a943cd4159f 100644 --- a/arch/arm/mach-imx/clock-imx31.c +++ b/arch/arm/mach-imx/clock-imx31.c @@ -32,7 +32,7 @@ #include <mach/mx31.h> #include <mach/common.h> -#include "crmregs-imx31.h" +#include "crmregs-imx3.h" #define PRE_DIV_MIN_FREQ 10000000 /* Minimum Frequency after Predivider */ diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c index ac8238caecb9..1e279af656ad 100644 --- a/arch/arm/mach-imx/clock-imx35.c +++ b/arch/arm/mach-imx/clock-imx35.c @@ -27,23 +27,7 @@ #include <mach/hardware.h> #include <mach/common.h> -#define CCM_BASE MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR) - -#define CCM_CCMR 0x00 -#define CCM_PDR0 0x04 -#define CCM_PDR1 0x08 -#define CCM_PDR2 0x0C -#define CCM_PDR3 0x10 -#define CCM_PDR4 0x14 -#define CCM_RCSR 0x18 -#define CCM_MPCTL 0x1C -#define CCM_PPCTL 0x20 -#define CCM_ACMR 0x24 -#define CCM_COSR 0x28 -#define CCM_CGR0 0x2C -#define CCM_CGR1 0x30 -#define CCM_CGR2 0x34 -#define CCM_CGR3 0x38 +#include "crmregs-imx3.h" #ifdef HAVE_SET_RATE_SUPPORT static void calc_dividers(u32 div, u32 *pre, u32 *post, u32 maxpost) @@ -111,14 +95,14 @@ static void calc_dividers_3_3(u32 div, u32 *pre, u32 *post) static unsigned long get_rate_mpll(void) { - ulong mpctl = __raw_readl(CCM_BASE + CCM_MPCTL); + ulong mpctl = __raw_readl(MX35_CCM_MPCTL); return mxc_decode_pll(mpctl, 24000000); } static unsigned long get_rate_ppll(void) { - ulong ppctl = __raw_readl(CCM_BASE + CCM_PPCTL); + ulong ppctl = __raw_readl(MX35_CCM_PPCTL); return mxc_decode_pll(ppctl, 24000000); } @@ -148,7 +132,7 @@ static struct arm_ahb_div clk_consumer[] = { static unsigned long get_rate_arm(void) { - unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0); + unsigned long pdr0 = __raw_readl(MXC_CCM_PDR0); struct arm_ahb_div *aad; unsigned long fref = get_rate_mpll(); @@ -161,7 +145,7 @@ static unsigned long get_rate_arm(void) static unsigned long get_rate_ahb(struct clk *clk) { - unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0); + unsigned long pdr0 = __raw_readl(MXC_CCM_PDR0); struct arm_ahb_div *aad; unsigned long fref = get_rate_arm(); @@ -177,8 +161,8 @@ static unsigned long get_rate_ipg(struct clk *clk) static unsigned long get_rate_uart(struct clk *clk) { - unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3); - unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4); + unsigned long pdr3 = __raw_readl(MX35_CCM_PDR3); + unsigned long pdr4 = __raw_readl(MX35_CCM_PDR4); unsigned long div = ((pdr4 >> 10) & 0x3f) + 1; if (pdr3 & (1 << 14)) @@ -189,7 +173,7 @@ static unsigned long get_rate_uart(struct clk *clk) static unsigned long get_rate_sdhc(struct clk *clk) { - unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3); + unsigned long pdr3 = __raw_readl(MX35_CCM_PDR3); unsigned long div, rate; if (pdr3 & (1 << 6)) @@ -215,7 +199,7 @@ static unsigned long get_rate_sdhc(struct clk *clk) static unsigned long get_rate_mshc(struct clk *clk) { - unsigned long pdr1 = __raw_readl(CCM_BASE + CCM_PDR1); + unsigned long pdr1 = __raw_readl(MXC_CCM_PDR1); unsigned long div1, div2, rate; if (pdr1 & (1 << 7)) @@ -231,7 +215,7 @@ static unsigned long get_rate_mshc(struct clk *clk) static unsigned long get_rate_ssi(struct clk *clk) { - unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2); + unsigned long pdr2 = __raw_readl(MX35_CCM_PDR2); unsigned long div1, div2, rate; if (pdr2 & (1 << 6)) @@ -256,7 +240,7 @@ static unsigned long get_rate_ssi(struct clk *clk) static unsigned long get_rate_csi(struct clk *clk) { - unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2); + unsigned long pdr2 = __raw_readl(MX35_CCM_PDR2); unsigned long rate; if (pdr2 & (1 << 7)) @@ -269,7 +253,7 @@ static unsigned long get_rate_csi(struct clk *clk) static unsigned long get_rate_otg(struct clk *clk) { - unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4); + unsigned long pdr4 = __raw_readl(MX35_CCM_PDR4); unsigned long rate; if (pdr4 & (1 << 9)) @@ -282,8 +266,8 @@ static unsigned long get_rate_otg(struct clk *clk) static unsigned long get_rate_ipg_per(struct clk *clk) { - unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0); - unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4); + unsigned long pdr0 = __raw_readl(MXC_CCM_PDR0); + unsigned long pdr4 = __raw_readl(MX35_CCM_PDR4); unsigned long div; if (pdr0 & (1 << 26)) { @@ -297,7 +281,7 @@ static unsigned long get_rate_ipg_per(struct clk *clk) static unsigned long get_rate_hsp(struct clk *clk) { - unsigned long hsp_podf = (__raw_readl(CCM_BASE + CCM_PDR0) >> 20) & 0x03; + unsigned long hsp_podf = (__raw_readl(MXC_CCM_PDR0) >> 20) & 0x03; unsigned long fref = get_rate_mpll(); if (fref > 400 * 1000 * 1000) { @@ -345,7 +329,7 @@ static void clk_cgr_disable(struct clk *clk) #define DEFINE_CLOCK(name, i, er, es, gr, sr) \ static struct clk name = { \ .id = i, \ - .enable_reg = CCM_BASE + er, \ + .enable_reg = er, \ .enable_shift = es, \ .get_rate = gr, \ .set_rate = sr, \ @@ -353,59 +337,59 @@ static void clk_cgr_disable(struct clk *clk) .disable = clk_cgr_disable, \ } -DEFINE_CLOCK(asrc_clk, 0, CCM_CGR0, 0, NULL, NULL); -DEFINE_CLOCK(pata_clk, 0, CCM_CGR0, 2, get_rate_ipg, NULL); -/* DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0, 4, NULL, NULL); */ -DEFINE_CLOCK(can1_clk, 0, CCM_CGR0, 6, get_rate_ipg, NULL); -DEFINE_CLOCK(can2_clk, 1, CCM_CGR0, 8, get_rate_ipg, NULL); -DEFINE_CLOCK(cspi1_clk, 0, CCM_CGR0, 10, get_rate_ipg, NULL); -DEFINE_CLOCK(cspi2_clk, 1, CCM_CGR0, 12, get_rate_ipg, NULL); -DEFINE_CLOCK(ect_clk, 0, CCM_CGR0, 14, get_rate_ipg, NULL); -DEFINE_CLOCK(edio_clk, 0, CCM_CGR0, 16, NULL, NULL); -DEFINE_CLOCK(emi_clk, 0, CCM_CGR0, 18, get_rate_ipg, NULL); -DEFINE_CLOCK(epit1_clk, 0, CCM_CGR0, 20, get_rate_ipg, NULL); -DEFINE_CLOCK(epit2_clk, 1, CCM_CGR0, 22, get_rate_ipg, NULL); -DEFINE_CLOCK(esai_clk, 0, CCM_CGR0, 24, NULL, NULL); -DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGR0, 26, get_rate_sdhc, NULL); -DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGR0, 28, get_rate_sdhc, NULL); -DEFINE_CLOCK(esdhc3_clk, 2, CCM_CGR0, 30, get_rate_sdhc, NULL); - -DEFINE_CLOCK(fec_clk, 0, CCM_CGR1, 0, get_rate_ipg, NULL); -DEFINE_CLOCK(gpio1_clk, 0, CCM_CGR1, 2, NULL, NULL); -DEFINE_CLOCK(gpio2_clk, 1, CCM_CGR1, 4, NULL, NULL); -DEFINE_CLOCK(gpio3_clk, 2, CCM_CGR1, 6, NULL, NULL); -DEFINE_CLOCK(gpt_clk, 0, CCM_CGR1, 8, get_rate_ipg, NULL); -DEFINE_CLOCK(i2c1_clk, 0, CCM_CGR1, 10, get_rate_ipg_per, NULL); -DEFINE_CLOCK(i2c2_clk, 1, CCM_CGR1, 12, get_rate_ipg_per, NULL); -DEFINE_CLOCK(i2c3_clk, 2, CCM_CGR1, 14, get_rate_ipg_per, NULL); -DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL); -DEFINE_CLOCK(ipu_clk, 0, CCM_CGR1, 18, get_rate_hsp, NULL); -DEFINE_CLOCK(kpp_clk, 0, CCM_CGR1, 20, get_rate_ipg, NULL); -DEFINE_CLOCK(mlb_clk, 0, CCM_CGR1, 22, get_rate_ahb, NULL); -DEFINE_CLOCK(mshc_clk, 0, CCM_CGR1, 24, get_rate_mshc, NULL); -DEFINE_CLOCK(owire_clk, 0, CCM_CGR1, 26, get_rate_ipg_per, NULL); -DEFINE_CLOCK(pwm_clk, 0, CCM_CGR1, 28, get_rate_ipg_per, NULL); -DEFINE_CLOCK(rngc_clk, 0, CCM_CGR1, 30, get_rate_ipg, NULL); - -DEFINE_CLOCK(rtc_clk, 0, CCM_CGR2, 0, get_rate_ipg, NULL); -DEFINE_CLOCK(rtic_clk, 0, CCM_CGR2, 2, get_rate_ahb, NULL); -DEFINE_CLOCK(scc_clk, 0, CCM_CGR2, 4, get_rate_ipg, NULL); -DEFINE_CLOCK(sdma_clk, 0, CCM_CGR2, 6, NULL, NULL); -DEFINE_CLOCK(spba_clk, 0, CCM_CGR2, 8, get_rate_ipg, NULL); -DEFINE_CLOCK(spdif_clk, 0, CCM_CGR2, 10, NULL, NULL); -DEFINE_CLOCK(ssi1_clk, 0, CCM_CGR2, 12, get_rate_ssi, NULL); -DEFINE_CLOCK(ssi2_clk, 1, CCM_CGR2, 14, get_rate_ssi, NULL); -DEFINE_CLOCK(uart1_clk, 0, CCM_CGR2, 16, get_rate_uart, NULL); -DEFINE_CLOCK(uart2_clk, 1, CCM_CGR2, 18, get_rate_uart, NULL); -DEFINE_CLOCK(uart3_clk, 2, CCM_CGR2, 20, get_rate_uart, NULL); -DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, get_rate_otg, NULL); -DEFINE_CLOCK(wdog_clk, 0, CCM_CGR2, 24, NULL, NULL); -DEFINE_CLOCK(max_clk, 0, CCM_CGR2, 26, NULL, NULL); -DEFINE_CLOCK(audmux_clk, 0, CCM_CGR2, 30, NULL, NULL); - -DEFINE_CLOCK(csi_clk, 0, CCM_CGR3, 0, get_rate_csi, NULL); -DEFINE_CLOCK(iim_clk, 0, CCM_CGR3, 2, NULL, NULL); -DEFINE_CLOCK(gpu2d_clk, 0, CCM_CGR3, 4, NULL, NULL); +DEFINE_CLOCK(asrc_clk, 0, MX35_CCM_CGR0, 0, NULL, NULL); +DEFINE_CLOCK(pata_clk, 0, MX35_CCM_CGR0, 2, get_rate_ipg, NULL); +/* DEFINE_CLOCK(audmux_clk, 0, MX35_CCM_CGR0, 4, NULL, NULL); */ +DEFINE_CLOCK(can1_clk, 0, MX35_CCM_CGR0, 6, get_rate_ipg, NULL); +DEFINE_CLOCK(can2_clk, 1, MX35_CCM_CGR0, 8, get_rate_ipg, NULL); +DEFINE_CLOCK(cspi1_clk, 0, MX35_CCM_CGR0, 10, get_rate_ipg, NULL); +DEFINE_CLOCK(cspi2_clk, 1, MX35_CCM_CGR0, 12, get_rate_ipg, NULL); +DEFINE_CLOCK(ect_clk, 0, MX35_CCM_CGR0, 14, get_rate_ipg, NULL); +DEFINE_CLOCK(edio_clk, 0, MX35_CCM_CGR0, 16, NULL, NULL); +DEFINE_CLOCK(emi_clk, 0, MX35_CCM_CGR0, 18, get_rate_ipg, NULL); +DEFINE_CLOCK(epit1_clk, 0, MX35_CCM_CGR0, 20, get_rate_ipg, NULL); +DEFINE_CLOCK(epit2_clk, 1, MX35_CCM_CGR0, 22, get_rate_ipg, NULL); +DEFINE_CLOCK(esai_clk, 0, MX35_CCM_CGR0, 24, NULL, NULL); +DEFINE_CLOCK(esdhc1_clk, 0, MX35_CCM_CGR0, 26, get_rate_sdhc, NULL); +DEFINE_CLOCK(esdhc2_clk, 1, MX35_CCM_CGR0, 28, get_rate_sdhc, NULL); +DEFINE_CLOCK(esdhc3_clk, 2, MX35_CCM_CGR0, 30, get_rate_sdhc, NULL); + +DEFINE_CLOCK(fec_clk, 0, MX35_CCM_CGR1, 0, get_rate_ipg, NULL); +DEFINE_CLOCK(gpio1_clk, 0, MX35_CCM_CGR1, 2, NULL, NULL); +DEFINE_CLOCK(gpio2_clk, 1, MX35_CCM_CGR1, 4, NULL, NULL); +DEFINE_CLOCK(gpio3_clk, 2, MX35_CCM_CGR1, 6, NULL, NULL); +DEFINE_CLOCK(gpt_clk, 0, MX35_CCM_CGR1, 8, get_rate_ipg, NULL); +DEFINE_CLOCK(i2c1_clk, 0, MX35_CCM_CGR1, 10, get_rate_ipg_per, NULL); +DEFINE_CLOCK(i2c2_clk, 1, MX35_CCM_CGR1, 12, get_rate_ipg_per, NULL); +DEFINE_CLOCK(i2c3_clk, 2, MX35_CCM_CGR1, 14, get_rate_ipg_per, NULL); +DEFINE_CLOCK(iomuxc_clk, 0, MX35_CCM_CGR1, 16, NULL, NULL); +DEFINE_CLOCK(ipu_clk, 0, MX35_CCM_CGR1, 18, get_rate_hsp, NULL); +DEFINE_CLOCK(kpp_clk, 0, MX35_CCM_CGR1, 20, get_rate_ipg, NULL); +DEFINE_CLOCK(mlb_clk, 0, MX35_CCM_CGR1, 22, get_rate_ahb, NULL); +DEFINE_CLOCK(mshc_clk, 0, MX35_CCM_CGR1, 24, get_rate_mshc, NULL); +DEFINE_CLOCK(owire_clk, 0, MX35_CCM_CGR1, 26, get_rate_ipg_per, NULL); +DEFINE_CLOCK(pwm_clk, 0, MX35_CCM_CGR1, 28, get_rate_ipg_per, NULL); +DEFINE_CLOCK(rngc_clk, 0, MX35_CCM_CGR1, 30, get_rate_ipg, NULL); + +DEFINE_CLOCK(rtc_clk, 0, MX35_CCM_CGR2, 0, get_rate_ipg, NULL); +DEFINE_CLOCK(rtic_clk, 0, MX35_CCM_CGR2, 2, get_rate_ahb, NULL); +DEFINE_CLOCK(scc_clk, 0, MX35_CCM_CGR2, 4, get_rate_ipg, NULL); +DEFINE_CLOCK(sdma_clk, 0, MX35_CCM_CGR2, 6, NULL, NULL); +DEFINE_CLOCK(spba_clk, 0, MX35_CCM_CGR2, 8, get_rate_ipg, NULL); +DEFINE_CLOCK(spdif_clk, 0, MX35_CCM_CGR2, 10, NULL, NULL); +DEFINE_CLOCK(ssi1_clk, 0, MX35_CCM_CGR2, 12, get_rate_ssi, NULL); +DEFINE_CLOCK(ssi2_clk, 1, MX35_CCM_CGR2, 14, get_rate_ssi, NULL); +DEFINE_CLOCK(uart1_clk, 0, MX35_CCM_CGR2, 16, get_rate_uart, NULL); +DEFINE_CLOCK(uart2_clk, 1, MX35_CCM_CGR2, 18, get_rate_uart, NULL); +DEFINE_CLOCK(uart3_clk, 2, MX35_CCM_CGR2, 20, get_rate_uart, NULL); +DEFINE_CLOCK(usbotg_clk, 0, MX35_CCM_CGR2, 22, get_rate_otg, NULL); +DEFINE_CLOCK(wdog_clk, 0, MX35_CCM_CGR2, 24, NULL, NULL); +DEFINE_CLOCK(max_clk, 0, MX35_CCM_CGR2, 26, NULL, NULL); +DEFINE_CLOCK(audmux_clk, 0, MX35_CCM_CGR2, 30, NULL, NULL); + +DEFINE_CLOCK(csi_clk, 0, MX35_CCM_CGR3, 0, get_rate_csi, NULL); +DEFINE_CLOCK(iim_clk, 0, MX35_CCM_CGR3, 2, NULL, NULL); +DEFINE_CLOCK(gpu2d_clk, 0, MX35_CCM_CGR3, 4, NULL, NULL); DEFINE_CLOCK(usbahb_clk, 0, 0, 0, get_rate_ahb, NULL); @@ -422,7 +406,7 @@ static unsigned long get_rate_nfc(struct clk *clk) { unsigned long div1; - div1 = (__raw_readl(CCM_BASE + CCM_PDR4) >> 28) + 1; + div1 = (__raw_readl(MX35_CCM_PDR4) >> 28) + 1; return get_rate_ahb(NULL) / div1; } @@ -518,11 +502,11 @@ int __init mx35_clocks_init() /* Turn off all clocks except the ones we need to survive, namely: * EMI, GPIO1/2/3, GPT, IOMUX, MAX and eventually uart */ - __raw_writel((3 << 18), CCM_BASE + CCM_CGR0); + __raw_writel((3 << 18), MX35_CCM_CGR0); __raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16), - CCM_BASE + CCM_CGR1); - __raw_writel(cgr2, CCM_BASE + CCM_CGR2); - __raw_writel(0, CCM_BASE + CCM_CGR3); + MX35_CCM_CGR1); + __raw_writel(cgr2, MX35_CCM_CGR2); + __raw_writel(0, MX35_CCM_CGR3); clk_enable(&iim_clk); imx_print_silicon_rev("i.MX35", mx35_revision()); @@ -533,7 +517,7 @@ int __init mx35_clocks_init() * extra clocks turned on, otherwise the MX35 boot ROM code will * hang after a watchdog reset. */ - if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) { + if (!(__raw_readl(MX35_CCM_RCSR) & (3 << 10))) { /* Additionally turn on UART1, SCC, and IIM clocks */ clk_enable(&iim_clk); clk_enable(&uart1_clk); diff --git a/arch/arm/mach-imx/crmregs-imx31.h b/arch/arm/mach-imx/crmregs-imx3.h index 37a8a07beda3..d7691e2362c1 100644 --- a/arch/arm/mach-imx/crmregs-imx31.h +++ b/arch/arm/mach-imx/crmregs-imx3.h @@ -24,23 +24,36 @@ #define CKIH_CLK_FREQ_27MHZ 27000000 #define CKIL_CLK_FREQ 32768 -#define MXC_CCM_BASE MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR) +#define MXC_CCM_BASE (cpu_is_mx31() ? \ +MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR) : MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR)) /* Register addresses */ #define MXC_CCM_CCMR (MXC_CCM_BASE + 0x00) #define MXC_CCM_PDR0 (MXC_CCM_BASE + 0x04) #define MXC_CCM_PDR1 (MXC_CCM_BASE + 0x08) +#define MX35_CCM_PDR2 (MXC_CCM_BASE + 0x0C) #define MXC_CCM_RCSR (MXC_CCM_BASE + 0x0C) +#define MX35_CCM_PDR3 (MXC_CCM_BASE + 0x10) #define MXC_CCM_MPCTL (MXC_CCM_BASE + 0x10) +#define MX35_CCM_PDR4 (MXC_CCM_BASE + 0x14) #define MXC_CCM_UPCTL (MXC_CCM_BASE + 0x14) +#define MX35_CCM_RCSR (MXC_CCM_BASE + 0x18) #define MXC_CCM_SRPCTL (MXC_CCM_BASE + 0x18) +#define MX35_CCM_MPCTL (MXC_CCM_BASE + 0x1C) #define MXC_CCM_COSR (MXC_CCM_BASE + 0x1C) +#define MX35_CCM_PPCTL (MXC_CCM_BASE + 0x20) #define MXC_CCM_CGR0 (MXC_CCM_BASE + 0x20) +#define MX35_CCM_ACMR (MXC_CCM_BASE + 0x24) #define MXC_CCM_CGR1 (MXC_CCM_BASE + 0x24) +#define MX35_CCM_COSR (MXC_CCM_BASE + 0x28) #define MXC_CCM_CGR2 (MXC_CCM_BASE + 0x28) +#define MX35_CCM_CGR0 (MXC_CCM_BASE + 0x2C) #define MXC_CCM_WIMR (MXC_CCM_BASE + 0x2C) +#define MX35_CCM_CGR1 (MXC_CCM_BASE + 0x30) #define MXC_CCM_LDC (MXC_CCM_BASE + 0x30) +#define MX35_CCM_CGR2 (MXC_CCM_BASE + 0x34) #define MXC_CCM_DCVR0 (MXC_CCM_BASE + 0x34) +#define MX35_CCM_CGR3 (MXC_CCM_BASE + 0x38) #define MXC_CCM_DCVR1 (MXC_CCM_BASE + 0x38) #define MXC_CCM_DCVR2 (MXC_CCM_BASE + 0x3C) #define MXC_CCM_DCVR3 (MXC_CCM_BASE + 0x40) diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index e4f426a09899..27bc27e6ea41 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -51,7 +51,7 @@ #include <mach/ulpi.h> #include "devices-imx31.h" -#include "crmregs-imx31.h" +#include "crmregs-imx3.h" static int armadillo5x0_pins[] = { /* UART1 */ diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index c1c5fb6a5b4c..399c4c49722f 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -15,11 +15,12 @@ #include <linux/linkage.h> -#include <plat/io.h> #include <plat/board-ams-delta.h> #include <mach/ams-delta-fiq.h> +#include "iomap.h" + /* * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c. * Unfortunately, those were not placed in a separate header file. diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index 152b32c15e28..fcce7ff37630 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -22,6 +22,7 @@ #include <plat/board-ams-delta.h> #include <asm/fiq.h> + #include <mach/ams-delta-fiq.h> static struct fiq_handler fh = { diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index e0e8245f3c9f..83eac744ddb9 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -21,25 +21,27 @@ #include <linux/serial_8250.h> #include <linux/export.h> #include <linux/omapfb.h> +#include <linux/io.h> #include <media/soc_camera.h> #include <asm/serial.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/io.h> #include <plat/board-ams-delta.h> #include <plat/keypad.h> #include <plat/mux.h> #include <plat/usb.h> #include <plat/board.h> -#include "common.h" -#include <mach/camera.h> +#include <mach/hardware.h> #include <mach/ams-delta-fiq.h> +#include <mach/camera.h> + +#include "iomap.h" +#include "common.h" static u8 ams_delta_latch1_reg; static u16 ams_delta_latch2_reg; diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 7afaf3c5bdc6..80bd43c7f4ec 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -23,7 +23,6 @@ #include <linux/smc91x.h> #include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -33,9 +32,13 @@ #include <plat/flash.h> #include <plat/fpga.h> #include <plat/keypad.h> -#include "common.h" #include <plat/board.h> +#include <mach/hardware.h> + +#include "iomap.h" +#include "common.h" + /* fsample is pretty close to p2-sample */ #define fsample_cpld_read(reg) __raw_readb(reg) diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index af2be8c12c07..c3068622fdcb 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -32,8 +32,6 @@ #include <linux/smc91x.h> #include <linux/omapfb.h> -#include <mach/hardware.h> - #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -44,9 +42,11 @@ #include <plat/irda.h> #include <plat/usb.h> #include <plat/keypad.h> -#include "common.h" #include <plat/flash.h> +#include <mach/hardware.h> + +#include "common.h" #include "board-h2.h" /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 7cfd25b90735..64b8584f64ce 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -34,21 +34,21 @@ #include <asm/setup.h> #include <asm/page.h> -#include <mach/hardware.h> - #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/irqs.h> #include <plat/mux.h> #include <plat/tc.h> #include <plat/usb.h> #include <plat/keypad.h> #include <plat/dma.h> -#include "common.h" #include <plat/flash.h> +#include <mach/hardware.h> +#include <mach/irqs.h> + +#include "common.h" #include "board-h3.h" /* In OMAP1710 H3 the Ethernet is directly connected to CS1 */ diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index af2afcf24f75..827d83a96af8 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -27,7 +27,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/input.h> -#include <linux/io.h> +#include <linux/delay.h> #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/i2c.h> @@ -42,7 +42,6 @@ #include <asm/mach/arch.h> #include <plat/omap7xx.h> -#include "common.h" #include <plat/board.h> #include <plat/keypad.h> #include <plat/usb.h> @@ -50,7 +49,7 @@ #include <mach/irqs.h> -#include <linux/delay.h> +#include "common.h" /* LCD register definition */ #define OMAP_LCDC_CONTROL (0xfffec000 + 0x00) diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 1d5ab6606b9f..61219182d16a 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -27,7 +27,6 @@ #include <linux/smc91x.h> #include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -38,9 +37,13 @@ #include <plat/tc.h> #include <plat/usb.h> #include <plat/keypad.h> -#include "common.h" #include <plat/mmc.h> +#include <mach/hardware.h> + +#include "iomap.h" +#include "common.h" + /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define INNOVATOR1610_ETHR_START 0x04000300 diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 9b6332a31fb6..fe95ec5f6f03 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -21,7 +21,6 @@ #include <linux/workqueue.h> #include <linux/delay.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -30,11 +29,14 @@ #include <plat/usb.h> #include <plat/board.h> #include <plat/keypad.h> -#include "common.h" #include <plat/lcd_mipid.h> #include <plat/mmc.h> #include <plat/clock.h> +#include <mach/hardware.h> + +#include "common.h" + #define ADS7846_PENDOWN_GPIO 15 static const unsigned int nokia770_keymap[] = { diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index ef874655fbd3..1fe347396f4d 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -35,15 +35,11 @@ #include <linux/leds.h> #include <linux/smc91x.h> #include <linux/omapfb.h> - #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> - #include <linux/i2c/tps65010.h> -#include <mach/hardware.h> - #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -52,6 +48,9 @@ #include <plat/usb.h> #include <plat/mux.h> #include <plat/tc.h> + +#include <mach/hardware.h> + #include "common.h" /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */ diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 612342cb2a2d..0863d8e2bdf1 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -29,7 +29,6 @@ #include <linux/apm-emulation.h> #include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -42,6 +41,9 @@ #include <plat/board.h> #include <plat/irda.h> #include <plat/keypad.h> + +#include <mach/hardware.h> + #include "common.h" #define PALMTE_USBDETECT_GPIO 0 diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index b63350bc88fd..4ff699c509c0 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -25,8 +25,9 @@ #include <linux/mtd/physmap.h> #include <linux/leds.h> #include <linux/omapfb.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -40,10 +41,10 @@ #include <plat/board.h> #include <plat/irda.h> #include <plat/keypad.h> -#include "common.h" -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> +#include <mach/hardware.h> + +#include "common.h" #define PALMTT_USBDETECT_GPIO 0 #define PALMTT_CABLE_GPIO 1 diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 9924c70af09f..abcbbd339aeb 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -28,8 +28,9 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/omapfb.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -42,10 +43,10 @@ #include <plat/board.h> #include <plat/irda.h> #include <plat/keypad.h> -#include "common.h" -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> +#include <mach/hardware.h> + +#include "common.h" #define PALMZ71_USBDETECT_GPIO 0 #define PALMZ71_PENIRQ_GPIO 6 diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 8e0153447c6d..76d4ee05a814 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -23,7 +23,6 @@ #include <linux/smc91x.h> #include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -33,9 +32,13 @@ #include <plat/fpga.h> #include <plat/flash.h> #include <plat/keypad.h> -#include "common.h" #include <plat/board.h> +#include <mach/hardware.h> + +#include "iomap.h" +#include "common.h" + static const unsigned int p2_keymap[] = { KEY(0, 0, KEY_UP), KEY(1, 0, KEY_RIGHT), diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 0c76e12337d9..f34cb74a9f41 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -29,7 +29,6 @@ #include <linux/export.h> #include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -41,10 +40,13 @@ #include <plat/usb.h> #include <plat/tc.h> #include <plat/board.h> -#include "common.h" #include <plat/keypad.h> #include <plat/board-sx1.h> +#include <mach/hardware.h> + +#include "common.h" + /* Write to I2C device */ int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) { diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index f83a502dc93c..659d0f75de2c 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -27,18 +27,20 @@ #include <linux/smc91x.h> #include <linux/export.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <plat/board-voiceblue.h> -#include "common.h" #include <plat/flash.h> #include <plat/mux.h> #include <plat/tc.h> #include <plat/usb.h> +#include <mach/hardware.h> + +#include "common.h" + static struct plat_serial8250_port voiceblue_ports[] = { { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000), diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 0c50df05d135..67382ddd8c83 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -15,8 +15,8 @@ #include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> -#include <linux/clk.h> #include <linux/io.h> +#include <linux/clk.h> #include <linux/clkdev.h> #include <asm/mach-types.h> @@ -27,6 +27,9 @@ #include <plat/sram.h> #include <plat/clkdev_omap.h> +#include <mach/hardware.h> + +#include "iomap.h" #include "clock.h" #include "opp.h" diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 94699a82a734..c6ce93f71d08 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -15,10 +15,10 @@ */ #include <linux/kernel.h> +#include <linux/io.h> #include <linux/clk.h> #include <linux/cpufreq.h> #include <linux/delay.h> -#include <linux/io.h> #include <asm/mach-types.h> /* for machine_is_* */ @@ -28,6 +28,9 @@ #include <plat/sram.h> /* for omap_sram_reprogram_clock() */ #include <plat/usb.h> /* for OTG_BASE */ +#include <mach/hardware.h> + +#include "iomap.h" #include "clock.h" /* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */ diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index a9a5146dd2d4..af658ad338ec 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -58,5 +58,6 @@ void omap1_restart(char, const char *); extern struct sys_timer omap1_timer; extern bool omap_32k_timer_init(void); +extern void __init omap_init_consistent_dma_size(void); #endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */ diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 187b2fe132e9..dcd8ddbec2bb 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -15,20 +15,20 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/io.h> #include <linux/spi/spi.h> -#include <mach/camera.h> -#include <mach/hardware.h> #include <asm/mach/map.h> -#include "common.h" #include <plat/tc.h> #include <plat/board.h> #include <plat/mux.h> #include <plat/mmc.h> #include <plat/omap7xx.h> +#include <mach/camera.h> +#include <mach/hardware.h> + +#include "common.h" #include "clock.h" /*-------------------------------------------------------------------------*/ diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index f5a52204b89f..3ef7d52316b4 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -19,11 +19,11 @@ */ #include <linux/err.h> -#include <linux/io.h> #include <linux/slab.h> #include <linux/module.h> #include <linux/init.h> #include <linux/device.h> +#include <linux/io.h> #include <plat/dma.h> #include <plat/tc.h> diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c index 1749cb37dda0..f9bf78d4fdfb 100644 --- a/arch/arm/mach-omap1/flash.c +++ b/arch/arm/mach-omap1/flash.c @@ -6,13 +6,15 @@ * published by the Free Software Foundation. */ +#include <linux/io.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> -#include <plat/io.h> #include <plat/tc.h> #include <plat/flash.h> +#include <mach/hardware.h> + void omap1_set_vpp(struct platform_device *pdev, int enable) { static int count; diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 0a17a1a7e00d..76c67b3f9f61 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -24,12 +24,15 @@ #include <linux/errno.h> #include <linux/io.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/irq.h> #include <plat/fpga.h> +#include <mach/hardware.h> + +#include "iomap.h" + static void fpga_mask_irq(struct irq_data *d) { unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE; diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 399da4ce017b..634903ef8292 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -42,11 +42,12 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = { .irqstatus = OMAP_MPUIO_GPIO_INT, .irqenable = OMAP_MPUIO_GPIO_MASKIT, .irqenable_inv = true, + .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE, }; static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, - .bank_type = METHOD_MPUIO, + .is_mpuio = true, .bank_width = 16, .bank_stride = 1, .regs = &omap15xx_mpuio_regs, @@ -83,11 +84,12 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = { .irqstatus = OMAP1510_GPIO_INT_STATUS, .irqenable = OMAP1510_GPIO_INT_MASK, .irqenable_inv = true, + .irqctrl = OMAP1510_GPIO_INT_CONTROL, + .pinctrl = OMAP1510_GPIO_PIN_CONTROL, }; static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = { .virtual_irq_start = IH_GPIO_BASE, - .bank_type = METHOD_GPIO_1510, .bank_width = 16, .regs = &omap15xx_gpio_regs, }; @@ -115,7 +117,6 @@ static int __init omap15xx_gpio_init(void) platform_device_register(&omap15xx_mpu_gpio); platform_device_register(&omap15xx_gpio); - gpio_bank_count = 2; return 0; } postcore_initcall(omap15xx_gpio_init); diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 0f399bd0e70e..1fb3b9ad496e 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -24,6 +24,9 @@ #define OMAP1610_GPIO4_BASE 0xfffbbc00 #define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE +/* smart idle, enable wakeup */ +#define SYSCONFIG_WORD 0x14 + /* mpu gpio */ static struct __initdata resource omap16xx_mpu_gpio_resources[] = { { @@ -45,11 +48,12 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = { .irqstatus = OMAP_MPUIO_GPIO_INT, .irqenable = OMAP_MPUIO_GPIO_MASKIT, .irqenable_inv = true, + .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE, }; static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, - .bank_type = METHOD_MPUIO, + .is_mpuio = true, .bank_width = 16, .bank_stride = 1, .regs = &omap16xx_mpuio_regs, @@ -89,11 +93,13 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = { .irqenable = OMAP1610_GPIO_IRQENABLE1, .set_irqenable = OMAP1610_GPIO_SET_IRQENABLE1, .clr_irqenable = OMAP1610_GPIO_CLEAR_IRQENABLE1, + .wkup_en = OMAP1610_GPIO_WAKEUPENABLE, + .edgectrl1 = OMAP1610_GPIO_EDGE_CTRL1, + .edgectrl2 = OMAP1610_GPIO_EDGE_CTRL2, }; static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = { .virtual_irq_start = IH_GPIO_BASE, - .bank_type = METHOD_GPIO_1610, .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -123,7 +129,6 @@ static struct __initdata resource omap16xx_gpio2_resources[] = { static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = { .virtual_irq_start = IH_GPIO_BASE + 16, - .bank_type = METHOD_GPIO_1610, .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -153,7 +158,6 @@ static struct __initdata resource omap16xx_gpio3_resources[] = { static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = { .virtual_irq_start = IH_GPIO_BASE + 32, - .bank_type = METHOD_GPIO_1610, .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -183,7 +187,6 @@ static struct __initdata resource omap16xx_gpio4_resources[] = { static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = { .virtual_irq_start = IH_GPIO_BASE + 48, - .bank_type = METHOD_GPIO_1610, .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -214,14 +217,42 @@ static struct __initdata platform_device * omap16xx_gpio_dev[] = { static int __init omap16xx_gpio_init(void) { int i; + void __iomem *base; + struct resource *res; + struct platform_device *pdev; + struct omap_gpio_platform_data *pdata; if (!cpu_is_omap16xx()) return -EINVAL; - for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++) - platform_device_register(omap16xx_gpio_dev[i]); + /* + * Enable system clock for GPIO module. + * The CAM_CLK_CTRL *is* really the right place. + */ + omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, + ULPD_CAM_CLK_CTRL); + + for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++) { + pdev = omap16xx_gpio_dev[i]; + pdata = pdev->dev.platform_data; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!res)) { + dev_err(&pdev->dev, "Invalid mem resource.\n"); + return -ENODEV; + } - gpio_bank_count = ARRAY_SIZE(omap16xx_gpio_dev); + base = ioremap(res->start, resource_size(res)); + if (unlikely(!base)) { + dev_err(&pdev->dev, "ioremap failed.\n"); + return -ENOMEM; + } + + __raw_writel(SYSCONFIG_WORD, base + OMAP1610_GPIO_SYSCONFIG); + iounmap(base); + + platform_device_register(omap16xx_gpio_dev[i]); + } return 0; } diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index 5ab63eab0ff5..4771d6b68b96 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -47,12 +47,13 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = { .irqstatus = OMAP_MPUIO_GPIO_INT / 2, .irqenable = OMAP_MPUIO_GPIO_MASKIT / 2, .irqenable_inv = true, + .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE >> 1, }; static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, - .bank_type = METHOD_MPUIO, - .bank_width = 32, + .is_mpuio = true, + .bank_width = 16, .bank_stride = 2, .regs = &omap7xx_mpuio_regs, }; @@ -88,11 +89,11 @@ static struct omap_gpio_reg_offs omap7xx_gpio_regs = { .irqstatus = OMAP7XX_GPIO_INT_STATUS, .irqenable = OMAP7XX_GPIO_INT_MASK, .irqenable_inv = true, + .irqctrl = OMAP7XX_GPIO_INT_CONTROL, }; static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = { .virtual_irq_start = IH_GPIO_BASE, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -122,7 +123,6 @@ static struct __initdata resource omap7xx_gpio2_resources[] = { static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = { .virtual_irq_start = IH_GPIO_BASE + 32, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -152,7 +152,6 @@ static struct __initdata resource omap7xx_gpio3_resources[] = { static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = { .virtual_irq_start = IH_GPIO_BASE + 64, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -182,7 +181,6 @@ static struct __initdata resource omap7xx_gpio4_resources[] = { static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = { .virtual_irq_start = IH_GPIO_BASE + 96, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -212,7 +210,6 @@ static struct __initdata resource omap7xx_gpio5_resources[] = { static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = { .virtual_irq_start = IH_GPIO_BASE + 128, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -242,7 +239,6 @@ static struct __initdata resource omap7xx_gpio6_resources[] = { static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = { .virtual_irq_start = IH_GPIO_BASE + 160, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -282,8 +278,6 @@ static int __init omap7xx_gpio_init(void) for (i = 0; i < ARRAY_SIZE(omap7xx_gpio_dev); i++) platform_device_register(omap7xx_gpio_dev[i]); - gpio_bank_count = ARRAY_SIZE(omap7xx_gpio_dev); - return 0; } postcore_initcall(omap7xx_gpio_init); diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index a0e3560b39db..f24c1e2c5044 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -15,8 +15,11 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> + #include <plat/cpu.h> +#include <mach/hardware.h> + #define OMAP_DIE_ID_0 0xfffe1800 #define OMAP_DIE_ID_1 0xfffe1804 #define OMAP_PRODUCTION_ID_0 0xfffe2000 diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S index 83c0250c530a..fa0f32a686aa 100644 --- a/arch/arm/mach-omap1/include/mach/entry-macro.S +++ b/arch/arm/mach-omap1/include/mach/entry-macro.S @@ -9,10 +9,12 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ + #include <mach/hardware.h> #include <mach/io.h> #include <mach/irqs.h> -#include <asm/hardware/gic.h> + +#include "../../iomap.h" .macro get_irqnr_preamble, base, tmp .endm diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h index a3f6287b2007..01e35fa106b8 100644 --- a/arch/arm/mach-omap1/include/mach/hardware.h +++ b/arch/arm/mach-omap1/include/mach/hardware.h @@ -2,4 +2,40 @@ * arch/arm/mach-omap1/include/mach/hardware.h */ +#ifndef __MACH_HARDWARE_H +#define __MACH_HARDWARE_H + +#ifndef __ASSEMBLER__ +/* + * NOTE: Please use ioremap + __raw_read/write where possible instead of these + */ +extern u8 omap_readb(u32 pa); +extern u16 omap_readw(u32 pa); +extern u32 omap_readl(u32 pa); +extern void omap_writeb(u8 v, u32 pa); +extern void omap_writew(u16 v, u32 pa); +extern void omap_writel(u32 v, u32 pa); + +#include <plat/tc.h> + +/* Almost all documentation for chip and board memory maps assumes + * BM is clear. Most devel boards have a switch to control booting + * from NOR flash (using external chipselect 3) rather than mask ROM, + * which uses BM to interchange the physical CS0 and CS3 addresses. + */ +static inline u32 omap_cs0m_phys(void) +{ + return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) + ? OMAP_CS3_PHYS : 0; +} + +static inline u32 omap_cs3_phys(void) +{ + return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) + ? 0 : OMAP_CS3_PHYS; +} + +#endif +#endif + #include <plat/hardware.h> diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h index 57bdf74a3e64..37b12e1fd022 100644 --- a/arch/arm/mach-omap1/include/mach/io.h +++ b/arch/arm/mach-omap1/include/mach/io.h @@ -1,5 +1,46 @@ /* * arch/arm/mach-omap1/include/mach/io.h + * + * IO definitions for TI OMAP processors and boards + * + * Copied from arch/arm/mach-sa1100/include/mach/io.h + * Copyright (C) 1997-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Modifications: + * 06-12-1997 RMK Created. + * 07-04-1999 RMK Major cleanup */ -#include <plat/io.h> +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h index c6337645ba8a..901082def9bd 100644 --- a/arch/arm/mach-omap1/include/mach/memory.h +++ b/arch/arm/mach-omap1/include/mach/memory.h @@ -18,7 +18,8 @@ * Note that the is_lbus_device() test is not very efficient on 1510 * because of the strncmp(). */ -#ifdef CONFIG_ARCH_OMAP15XX +#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__) +#include <plat/cpu.h> /* * OMAP-1510 Local Bus address offset diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 55a8f582d04c..d969a7203d14 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -15,9 +15,12 @@ #include <asm/tlb.h> #include <asm/mach/map.h> + #include <plat/mux.h> #include <plat/tc.h> +#include "iomap.h" +#include "common.h" #include "clock.h" extern void omap_check_revision(void); diff --git a/arch/arm/mach-omap1/iomap.h b/arch/arm/mach-omap1/iomap.h new file mode 100644 index 000000000000..d68175761c3d --- /dev/null +++ b/arch/arm/mach-omap1/iomap.h @@ -0,0 +1,42 @@ +/* + * IO mappings for OMAP1 + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifdef __ASSEMBLER__ +#define IOMEM(x) (x) +#else +#define IOMEM(x) ((void __force __iomem *)(x)) +#endif + +#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ +#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) + +/* + * ---------------------------------------------------------------------------- + * Omap1 specific IO mapping + * ---------------------------------------------------------------------------- + */ + +#define OMAP1_IO_PHYS 0xFFFB0000 +#define OMAP1_IO_SIZE 0x40000 +#define OMAP1_IO_VIRT (OMAP1_IO_PHYS - OMAP1_IO_OFFSET) diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index e5b104b7fce6..4448114fab72 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -42,11 +42,13 @@ #include <linux/interrupt.h> #include <linux/io.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/irq.h> + #include <plat/cpu.h> +#include <mach/hardware.h> + #define IRQ_BANK(irq) ((irq) >> 5) #define IRQ_BIT(irq) ((irq) & 0x1f) diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index 4c5ce7d829c2..86ace9aaa663 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -27,9 +27,10 @@ #include <linux/interrupt.h> #include <linux/io.h> +#include <plat/dma.h> + #include <mach/hardware.h> #include <mach/lcdc.h> -#include <plat/dma.h> int omap_lcd_dma_running(void) { diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 3e8410a99990..adf00975b9bb 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -19,12 +19,15 @@ #include <linux/platform_device.h> #include <linux/slab.h> -#include <mach/irqs.h> #include <plat/dma.h> #include <plat/mux.h> #include <plat/cpu.h> #include <plat/mcbsp.h> +#include <mach/irqs.h> + +#include "iomap.h" + #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 0c2c3669d594..306beaca14c5 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -49,7 +49,6 @@ #include <asm/mach/irq.h> #include <plat/cpu.h> -#include <mach/irqs.h> #include <plat/clock.h> #include <plat/sram.h> #include <plat/tc.h> @@ -57,6 +56,9 @@ #include <plat/dma.h> #include <plat/dmtimer.h> +#include <mach/irqs.h> + +#include "iomap.h" #include "pm.h" static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c index 91d199b64979..f255b153b863 100644 --- a/arch/arm/mach-omap1/reset.c +++ b/arch/arm/mach-omap1/reset.c @@ -4,9 +4,10 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <mach/hardware.h> #include <plat/prcm.h> +#include <mach/hardware.h> + void omap1_restart(char mode, const char *cmd) { /* diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index c875bdc902c5..0779db150da7 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -33,8 +33,12 @@ */ #include <linux/linkage.h> + #include <asm/assembler.h> + #include <mach/io.h> + +#include "iomap.h" #include "pm.h" .text diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S index 692587d07ea5..2ce0b9ab20e5 100644 --- a/arch/arm/mach-omap1/sram.S +++ b/arch/arm/mach-omap1/sram.S @@ -9,10 +9,14 @@ */ #include <linux/linkage.h> + #include <asm/assembler.h> + #include <mach/io.h> #include <mach/hardware.h> +#include "iomap.h" + .text /* diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index b8faffa44f9e..2fae6a2740f1 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -45,14 +45,15 @@ #include <linux/io.h> #include <asm/system.h> -#include <mach/hardware.h> #include <asm/leds.h> #include <asm/irq.h> #include <asm/sched_clock.h> +#include <mach/hardware.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> +#include "iomap.h" #include "common.h" #ifdef CONFIG_OMAP_MPU_TIMER diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 9a54ef4dcf5e..a2e6d0709df2 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -47,14 +47,17 @@ #include <linux/io.h> #include <asm/system.h> -#include <mach/hardware.h> #include <asm/leds.h> #include <asm/irq.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> -#include "common.h" + #include <plat/dmtimer.h> +#include <mach/hardware.h> + +#include "common.h" + /* * --------------------------------------------------------------------------- * 32KHz OS timer diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 49e64057cb67..41b0a2fe0b04 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -280,7 +280,6 @@ static struct omap_dss_board_info cm_t35_dss_data = { static struct omap2_mcspi_device_config tdo24m_mcspi_config = { .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ }; static struct tdo24m_platform_data tdo24m_config = { diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 50e40bc3f8f7..518091c5f77c 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -133,7 +133,6 @@ static void __init n8x0_usb_init(void) {} static struct omap2_mcspi_device_config p54spi_mcspi_config = { .turbo_mode = 0, - .single_channel = 1, }; static struct spi_board_info n800_spi_board_info[] __initdata = { diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 0e9d89a2048f..0f65c3b202ac 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -138,17 +138,14 @@ static struct lp5523_platform_data rx51_lp5523_platform_data = { static struct omap2_mcspi_device_config wl1251_mcspi_config = { .turbo_mode = 0, - .single_channel = 1, }; static struct omap2_mcspi_device_config mipid_mcspi_config = { .turbo_mode = 0, - .single_channel = 1, }; static struct omap2_mcspi_device_config tsc2005_mcspi_config = { .turbo_mode = 0, - .single_channel = 1, }; static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index 2a13b9f6c61c..a43a765dd092 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -121,7 +121,6 @@ static struct omap_dss_board_info zoom_dss_data = { static struct omap2_mcspi_device_config dss_lcd_mcspi_config = { .turbo_mode = 1, - .single_channel = 1, /* 0: slave, 1: master */ }; static struct spi_board_info nec_8048_spi_board_info[] __initdata = { diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 39f9d5a58d0c..7072e0d651b1 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -33,6 +33,7 @@ #include <linux/cpufreq.h> #include <linux/slab.h> +#include <plat/cpu.h> #include <plat/clock.h> #include <plat/sram.h> #include <plat/sdrc.h> diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index e069a9be93df..cd7fd0f91149 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -22,6 +22,7 @@ #include <asm/div64.h> #include <plat/clock.h> +#include <plat/cpu.h> #include "clock.h" #include "cm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index 61ad3855f10a..bace9308a4db 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -14,11 +14,14 @@ */ #include <linux/kernel.h> +#include <linux/io.h> #include <linux/clk.h> #include <linux/list.h> +#include <plat/hardware.h> #include <plat/clkdev_omap.h> +#include "iomap.h" #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c index d87bc9cb2a36..dfda9a3f2cb2 100644 --- a/arch/arm/mach-omap2/clock2430.c +++ b/arch/arm/mach-omap2/clock2430.c @@ -21,8 +21,10 @@ #include <linux/clk.h> #include <linux/io.h> +#include <plat/hardware.h> #include <plat/clock.h> +#include "iomap.h" #include "clock.h" #include "clock2xxx.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index 0cc12879e7b9..3b4d09a50399 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -17,8 +17,10 @@ #include <linux/clk.h> #include <linux/list.h> +#include <plat/hardware.h> #include <plat/clkdev_omap.h> +#include "iomap.h" #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c index 80bb0f0e92e6..12500097378d 100644 --- a/arch/arm/mach-omap2/clock2xxx.c +++ b/arch/arm/mach-omap2/clock2xxx.c @@ -22,6 +22,7 @@ #include <linux/clk.h> #include <linux/io.h> +#include <plat/cpu.h> #include <plat/clock.h> #include "clock.h" diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c index 952c3e01c9eb..794d82702c85 100644 --- a/arch/arm/mach-omap2/clock3xxx.c +++ b/arch/arm/mach-omap2/clock3xxx.c @@ -21,6 +21,7 @@ #include <linux/clk.h> #include <linux/io.h> +#include <plat/hardware.h> #include <plat/clock.h> #include "clock.h" diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index d75e5f6b8a01..981b9f9111a4 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -20,14 +20,15 @@ #include <linux/clk.h> #include <linux/list.h> +#include <plat/hardware.h> #include <plat/clkdev_omap.h> +#include "iomap.h" #include "clock.h" #include "clock3xxx.h" #include "clock34xx.h" #include "clock36xx.h" #include "clock3517.h" - #include "cm2xxx_3xxx.h" #include "cm-regbits-34xx.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 08e86d793a1f..79b98f22f207 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -26,8 +26,11 @@ #include <linux/kernel.h> #include <linux/list.h> #include <linux/clk.h> + +#include <plat/hardware.h> #include <plat/clkdev_omap.h> +#include "iomap.h" #include "clock.h" #include "clock44xx.h" #include "cm1_44xx.h" diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c index 04d39cdd2112..389f9f8b570c 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c @@ -18,8 +18,10 @@ #include <linux/err.h> #include <linux/io.h> -#include "common.h" +#include <plat/hardware.h> +#include "iomap.h" +#include "common.h" #include "cm.h" #include "cm2xxx_3xxx.h" #include "cm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/cm44xx.c b/arch/arm/mach-omap2/cm44xx.c index 6a836303252c..535d66e2822c 100644 --- a/arch/arm/mach-omap2/cm44xx.c +++ b/arch/arm/mach-omap2/cm44xx.c @@ -18,8 +18,8 @@ #include <linux/err.h> #include <linux/io.h> +#include "iomap.h" #include "common.h" - #include "cm.h" #include "cm1_44xx.h" #include "cm2_44xx.h" diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 6204deaf85b1..bd8810c3753f 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -20,8 +20,8 @@ #include <linux/err.h> #include <linux/io.h> +#include "iomap.h" #include "common.h" - #include "cm.h" #include "cm1_44xx.h" #include "cm2_44xx.h" diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 799a617ade30..9498b0f5fbd0 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -33,7 +33,6 @@ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ }; static struct ads7846_platform_data ads7846_config = { diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index aaf421178c91..1549c11000d3 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -17,12 +17,13 @@ #include <linux/clk.h> #include <linux/io.h> -#include "common.h" +#include <plat/hardware.h> #include <plat/board.h> #include <plat/mux.h> - #include <plat/clock.h> +#include "iomap.h" +#include "common.h" #include "sdrc.h" #include "control.h" diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 7e9338e8d684..4897ec02e798 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -134,6 +134,8 @@ void omap4_map_io(void); void ti81xx_map_io(void); void omap_barriers_init(void); +extern void __init omap_init_consistent_dma_size(void); + /** * omap_test_timeout - busy-loop, testing a condition * @cond: condition to test until it evaluates to true @@ -236,5 +238,10 @@ static inline u32 omap4_mpuss_read_prev_context_state(void) return 0; } #endif + +struct omap_sdrc_params; +extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1); + #endif /* __ASSEMBLER__ */ #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */ diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 114c037e433c..08e674bb0417 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -15,9 +15,11 @@ #include <linux/kernel.h> #include <linux/io.h> -#include "common.h" +#include <plat/hardware.h> #include <plat/sdrc.h> +#include "iomap.h" +#include "common.h" #include "cm-regbits-34xx.h" #include "prm-regbits-34xx.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index 96c4bcc0a75c..a406fd045ce1 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -16,7 +16,6 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H #define __ARCH_ARM_MACH_OMAP2_CONTROL_H -#include <mach/io.h> #include <mach/ctrl_module_core_44xx.h> #include <mach/ctrl_module_wkup_44xx.h> #include <mach/ctrl_module_pad_core_44xx.h> diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 881dab64ef6a..e4336035c0ea 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -25,7 +25,7 @@ #include <asm/mach/map.h> #include <asm/pmu.h> -#include <plat/tc.h> +#include "iomap.h" #include <plat/board.h> #include <plat/mmc.h> #include <plat/dma.h> diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 62e133ca4314..9706c648bc19 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -30,6 +30,7 @@ #include <plat/omap-pm.h> #include "common.h" +#include "iomap.h" #include "mux.h" #include "control.h" #include "display.h" diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c index ce91aad4cdad..e28e761b7ab9 100644 --- a/arch/arm/mach-omap2/emu.c +++ b/arch/arm/mach-omap2/emu.c @@ -21,6 +21,10 @@ #include <linux/clk.h> #include <linux/err.h> +#include <mach/hardware.h> + +#include "iomap.h" + MODULE_LICENSE("GPL"); MODULE_AUTHOR("Alexander Shishkin"); diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 64c0caed9516..2f994e5194e8 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -23,6 +23,9 @@ #include <plat/omap_hwmod.h> #include <plat/omap_device.h> +#include <plat/omap-pm.h> + +#include "powerdomain.h" static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) { @@ -31,6 +34,7 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) struct omap_gpio_dev_attr *dev_attr; char *name = "omap_gpio"; int id; + struct powerdomain *pwrdm; /* * extract the device id from name field available in the @@ -52,7 +56,7 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) pdata->bank_width = dev_attr->bank_width; pdata->dbck_flag = dev_attr->dbck_flag; pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1); - + pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL); if (!pdata) { pr_err("gpio%d: Memory allocation failed\n", id); @@ -61,8 +65,15 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) switch (oh->class->rev) { case 0: + if (id == 1) + /* non-wakeup GPIO pins for OMAP2 Bank1 */ + pdata->non_wakeup_gpios = 0xe203ffc0; + else if (id == 2) + /* non-wakeup GPIO pins for OMAP2 Bank2 */ + pdata->non_wakeup_gpios = 0x08700040; + /* fall through */ + case 1: - pdata->bank_type = METHOD_GPIO_24XX; pdata->regs->revision = OMAP24XX_GPIO_REVISION; pdata->regs->direction = OMAP24XX_GPIO_OE; pdata->regs->datain = OMAP24XX_GPIO_DATAIN; @@ -72,13 +83,19 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1; pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2; pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1; + pdata->regs->irqenable2 = OMAP24XX_GPIO_IRQENABLE2; pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1; pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1; pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL; pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN; + pdata->regs->ctrl = OMAP24XX_GPIO_CTRL; + pdata->regs->wkup_en = OMAP24XX_GPIO_WAKE_EN; + pdata->regs->leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0; + pdata->regs->leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1; + pdata->regs->risingdetect = OMAP24XX_GPIO_RISINGDETECT; + pdata->regs->fallingdetect = OMAP24XX_GPIO_FALLINGDETECT; break; case 2: - pdata->bank_type = METHOD_GPIO_44XX; pdata->regs->revision = OMAP4_GPIO_REVISION; pdata->regs->direction = OMAP4_GPIO_OE; pdata->regs->datain = OMAP4_GPIO_DATAIN; @@ -88,10 +105,17 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0; pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1; pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0; + pdata->regs->irqenable2 = OMAP4_GPIO_IRQSTATUSSET1; pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0; pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0; pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME; pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE; + pdata->regs->ctrl = OMAP4_GPIO_CTRL; + pdata->regs->wkup_en = OMAP4_GPIO_IRQWAKEN0; + pdata->regs->leveldetect0 = OMAP4_GPIO_LEVELDETECT0; + pdata->regs->leveldetect1 = OMAP4_GPIO_LEVELDETECT1; + pdata->regs->risingdetect = OMAP4_GPIO_RISINGDETECT; + pdata->regs->fallingdetect = OMAP4_GPIO_FALLINGDETECT; break; default: WARN(1, "Invalid gpio bank_type\n"); @@ -99,6 +123,9 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) return -EINVAL; } + pwrdm = omap_hwmod_get_pwrdm(oh); + pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm); + pdev = omap_device_build(name, id - 1, oh, pdata, sizeof(*pdata), NULL, 0, false); kfree(pdata); @@ -109,9 +136,6 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) return PTR_ERR(pdev); } - omap_device_disable_idle_on_suspend(pdev); - - gpio_bank_count++; return 0; } diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 8ad210bda9a9..386dec8d2351 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -16,6 +16,7 @@ #include <asm/mach/flash.h> +#include <plat/cpu.h> #include <plat/nand.h> #include <plat/board.h> #include <plat/gpmc.h> diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 5cdce10d6183..385b3e02c4a6 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -18,6 +18,7 @@ #include <asm/mach/flash.h> +#include <plat/cpu.h> #include <plat/onenand.h> #include <plat/board.h> #include <plat/gpmc.h> diff --git a/arch/arm/mach-omap2/include/mach/io.h b/arch/arm/mach-omap2/include/mach/io.h index fd78f31aa1ad..b8758c8a9394 100644 --- a/arch/arm/mach-omap2/include/mach/io.h +++ b/arch/arm/mach-omap2/include/mach/io.h @@ -1,5 +1,49 @@ /* * arch/arm/mach-omap2/include/mach/io.h + * + * IO definitions for TI OMAP processors and boards + * + * Copied from arch/arm/mach-sa1100/include/mach/io.h + * Copyright (C) 1997-1999 Russell King + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Modifications: + * 06-12-1997 RMK Created. + * 07-04-1999 RMK Major cleanup */ -#include <plat/io.h> +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 2d19efbbc52d..cd47a71297b9 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -23,25 +23,23 @@ #include <linux/clk.h> #include <asm/tlb.h> - #include <asm/mach/map.h> #include <plat/sram.h> #include <plat/sdrc.h> #include <plat/serial.h> - -#include "clock2xxx.h" -#include "clock3xxx.h" -#include "clock44xx.h" - -#include "common.h" #include <plat/omap-pm.h> +#include <plat/omap_hwmod.h> +#include <plat/multi.h> + +#include "iomap.h" #include "voltage.h" #include "powerdomain.h" - #include "clockdomain.h" -#include <plat/omap_hwmod.h> -#include <plat/multi.h> +#include "common.h" +#include "clock2xxx.h" +#include "clock3xxx.h" +#include "clock44xx.h" /* * The machine specific code may provide the extra mapping besides the @@ -489,43 +487,3 @@ void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, _omap2_init_reprogram_sdrc(); } } - -/* - * NOTE: Please use ioremap + __raw_read/write where possible instead of these - */ - -u8 omap_readb(u32 pa) -{ - return __raw_readb(OMAP2_L4_IO_ADDRESS(pa)); -} -EXPORT_SYMBOL(omap_readb); - -u16 omap_readw(u32 pa) -{ - return __raw_readw(OMAP2_L4_IO_ADDRESS(pa)); -} -EXPORT_SYMBOL(omap_readw); - -u32 omap_readl(u32 pa) -{ - return __raw_readl(OMAP2_L4_IO_ADDRESS(pa)); -} -EXPORT_SYMBOL(omap_readl); - -void omap_writeb(u8 v, u32 pa) -{ - __raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa)); -} -EXPORT_SYMBOL(omap_writeb); - -void omap_writew(u16 v, u32 pa) -{ - __raw_writew(v, OMAP2_L4_IO_ADDRESS(pa)); -} -EXPORT_SYMBOL(omap_writew); - -void omap_writel(u32 v, u32 pa) -{ - __raw_writel(v, OMAP2_L4_IO_ADDRESS(pa)); -} -EXPORT_SYMBOL(omap_writel); diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/mach-omap2/iomap.h index 0696bae1818b..e6f958165296 100644 --- a/arch/arm/plat-omap/include/plat/io.h +++ b/arch/arm/mach-omap2/iomap.h @@ -1,13 +1,5 @@ /* - * arch/arm/plat-omap/include/mach/io.h - * - * IO definitions for TI OMAP processors and boards - * - * Copied from arch/arm/mach-sa1100/include/mach/io.h - * Copyright (C) 1997-1999 Russell King - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * IO mappings for OMAP2+ * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -25,33 +17,9 @@ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Modifications: - * 06-12-1997 RMK Created. - * 07-04-1999 RMK Major cleanup - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include <mach/hardware.h> - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -/* - * ---------------------------------------------------------------------------- - * I/O mapping - * ---------------------------------------------------------------------------- */ #ifdef __ASSEMBLER__ @@ -60,13 +28,9 @@ #define IOMEM(x) ((void __force __iomem *)(x)) #endif -#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ -#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) - #define OMAP2_L3_IO_OFFSET 0x90000000 #define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */ - #define OMAP2_L4_IO_OFFSET 0xb2000000 #define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */ @@ -87,16 +51,6 @@ /* * ---------------------------------------------------------------------------- - * Omap1 specific IO mapping - * ---------------------------------------------------------------------------- - */ - -#define OMAP1_IO_PHYS 0xFFFB0000 -#define OMAP1_IO_SIZE 0x40000 -#define OMAP1_IO_VIRT (OMAP1_IO_PHYS - OMAP1_IO_OFFSET) - -/* - * ---------------------------------------------------------------------------- * Omap2 specific IO mapping * ---------------------------------------------------------------------------- */ @@ -247,31 +201,3 @@ /* 0x4e000000 --> 0xfd300000 */ #define OMAP44XX_DMM_SIZE SZ_1M #define OMAP44XX_DMM_VIRT (OMAP44XX_EMIF2_VIRT + OMAP44XX_EMIF2_SIZE) -/* - * ---------------------------------------------------------------------------- - * Omap specific register access - * ---------------------------------------------------------------------------- - */ - -#ifndef __ASSEMBLER__ - -/* - * NOTE: Please use ioremap + __raw_read/write where possible instead of these - */ - -extern u8 omap_readb(u32 pa); -extern u16 omap_readw(u32 pa); -extern u32 omap_readl(u32 pa); -extern void omap_writeb(u8 v, u32 pa); -extern void omap_writew(u16 v, u32 pa); -extern void omap_writel(u32 v, u32 pa); - -struct omap_sdrc_params; -extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, - struct omap_sdrc_params *sdrc_cs1); - -extern void __init omap_init_consistent_dma_size(void); - -#endif - -#endif diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 1fef061f7927..6da2d0edee11 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -14,10 +14,13 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/io.h> -#include <mach/hardware.h> + #include <asm/exception.h> #include <asm/mach/irq.h> +#include <mach/hardware.h> + +#include "iomap.h" /* selected INTC register offsets */ diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index fe9ab7c58fae..63ab686834c1 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -263,12 +263,10 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) * In MPUSS OSWR or device OFF, interrupt controller contest is lost. */ mpuss_clear_prev_logic_pwrst(); - pwrdm_clear_all_prev_pwrst(mpuss_pd); if ((pwrdm_read_next_pwrst(mpuss_pd) == PWRDM_POWER_RET) && (pwrdm_read_logic_retst(mpuss_pd) == PWRDM_POWER_OFF)) save_state = 2; - clear_cpu_prev_pwrst(cpu); cpu_clear_prev_logic_pwrst(cpu); set_cpu_next_pwrst(cpu, power_state); set_cpu_wakeup_addr(cpu, virt_to_phys(omap4_cpu_resume)); diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index c1bf3ef0ba02..deffbf1c9627 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -23,11 +23,12 @@ #include <asm/cacheflush.h> #include <asm/hardware/gic.h> #include <asm/smp_scu.h> + #include <mach/hardware.h> #include <mach/omap-secure.h> +#include "iomap.h" #include "common.h" - #include "clockdomain.h" /* SCU base address */ diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c index e6dda694fd5c..5037e76e4e23 100644 --- a/arch/arm/mach-omap2/opp2420_data.c +++ b/arch/arm/mach-omap2/opp2420_data.c @@ -28,6 +28,8 @@ * http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/ */ +#include <plat/hardware.h> + #include "opp2xxx.h" #include "sdrc.h" #include "clock.h" diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c index 1b9596ae201e..750805c528d8 100644 --- a/arch/arm/mach-omap2/opp2430_data.c +++ b/arch/arm/mach-omap2/opp2430_data.c @@ -26,6 +26,8 @@ * This is technically part of the OMAP2xxx clock code. */ +#include <plat/hardware.h> + #include "opp2xxx.h" #include "sdrc.h" #include "clock.h" diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 4411163e012d..814bcd901596 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -220,8 +220,8 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir) return 0; d = debugfs_create_dir(pwrdm->name, (struct dentry *)dir); - - (void) debugfs_create_file("suspend", S_IRUGO|S_IWUSR, d, + if (!(IS_ERR_OR_NULL(d))) + (void) debugfs_create_file("suspend", S_IRUGO|S_IWUSR, d, (void *)pwrdm, &pwrdm_suspend_fops); return 0; @@ -264,7 +264,7 @@ static int __init pm_dbg_init(void) return 0; d = debugfs_create_dir("pm_debug", NULL); - if (IS_ERR(d)) + if (IS_ERR_OR_NULL(d)) return PTR_ERR(d); (void) debugfs_create_file("count", S_IRUGO, diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 184ae21feea7..52787b0eaec6 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -15,11 +15,13 @@ #include <linux/err.h> #include <linux/opp.h> #include <linux/export.h> +#include <linux/suspend.h> #include <plat/omap-pm.h> #include <plat/omap_device.h> #include "common.h" +#include "prcm-common.h" #include "voltage.h" #include "powerdomain.h" #include "clockdomain.h" @@ -28,6 +30,12 @@ static struct omap_device_pm_latency *pm_lats; +/* + * omap_pm_suspend: points to a function that does the SoC-specific + * suspend work + */ +int (*omap_pm_suspend)(void); + static int __init _init_omap_device(char *name) { struct omap_hwmod *oh; @@ -68,32 +76,41 @@ static void __init omap2_init_processor_devices(void) #define FORCEWAKEUP_SWITCH 0 #define LOWPOWERSTATE_SWITCH 1 +int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused) +{ + if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO) + clkdm_allow_idle(clkdm); + else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && + atomic_read(&clkdm->usecount) == 0) + clkdm_sleep(clkdm); + return 0; +} + /* * This sets pwrdm state (other than mpu & core. Currently only ON & * RET are supported. */ -int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) +int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 pwrst) { - u32 cur_state; - int sleep_switch = -1; - int ret = 0; - int hwsup = 0; + u8 curr_pwrst, next_pwrst; + int sleep_switch = -1, ret = 0, hwsup = 0; - if (pwrdm == NULL || IS_ERR(pwrdm)) + if (!pwrdm || IS_ERR(pwrdm)) return -EINVAL; - while (!(pwrdm->pwrsts & (1 << state))) { - if (state == PWRDM_POWER_OFF) + while (!(pwrdm->pwrsts & (1 << pwrst))) { + if (pwrst == PWRDM_POWER_OFF) return ret; - state--; + pwrst--; } - cur_state = pwrdm_read_next_pwrst(pwrdm); - if (cur_state == state) + next_pwrst = pwrdm_read_next_pwrst(pwrdm); + if (next_pwrst == pwrst) return ret; - if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) { - if ((pwrdm_read_pwrst(pwrdm) > state) && + curr_pwrst = pwrdm_read_pwrst(pwrdm); + if (curr_pwrst < PWRDM_POWER_ON) { + if ((curr_pwrst > pwrst) && (pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) { sleep_switch = LOWPOWERSTATE_SWITCH; } else { @@ -103,12 +120,10 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) } } - ret = pwrdm_set_next_pwrst(pwrdm, state); - if (ret) { - pr_err("%s: unable to set state of powerdomain: %s\n", + ret = pwrdm_set_next_pwrst(pwrdm, pwrst); + if (ret) + pr_err("%s: unable to set power state of powerdomain: %s\n", __func__, pwrdm->name); - goto err; - } switch (sleep_switch) { case FORCEWAKEUP_SWITCH: @@ -119,16 +134,16 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) break; case LOWPOWERSTATE_SWITCH: pwrdm_set_lowpwrstchange(pwrdm); + pwrdm_wait_transition(pwrdm); + pwrdm_state_switch(pwrdm); break; - default: - return ret; } - pwrdm_state_switch(pwrdm); -err: return ret; } + + /* * This API is to be called during init to set the various voltage * domains to the voltage as per the opp table. Typically we boot up @@ -199,6 +214,56 @@ exit: return -EINVAL; } +#ifdef CONFIG_SUSPEND +static int omap_pm_enter(suspend_state_t suspend_state) +{ + int ret = 0; + + if (!omap_pm_suspend) + return -ENOENT; /* XXX doublecheck */ + + switch (suspend_state) { + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + ret = omap_pm_suspend(); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int omap_pm_begin(suspend_state_t state) +{ + disable_hlt(); + if (cpu_is_omap34xx()) + omap_prcm_irq_prepare(); + return 0; +} + +static void omap_pm_end(void) +{ + enable_hlt(); + return; +} + +static void omap_pm_finish(void) +{ + if (cpu_is_omap34xx()) + omap_prcm_irq_complete(); +} + +static const struct platform_suspend_ops omap_pm_ops = { + .begin = omap_pm_begin, + .end = omap_pm_end, + .enter = omap_pm_enter, + .finish = omap_pm_finish, + .valid = suspend_valid_only_mem, +}; + +#endif /* CONFIG_SUSPEND */ + static void __init omap3_init_voltages(void) { if (!cpu_is_omap34xx()) @@ -241,6 +306,10 @@ static int __init omap2_common_pm_late_init(void) /* Smartreflex device init */ omap_devinit_smartreflex(); +#ifdef CONFIG_SUSPEND + suspend_set_ops(&omap_pm_ops); +#endif + return 0; } late_initcall(omap2_common_pm_late_init); diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index b737b11e4499..36fa90b6ece8 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -18,10 +18,11 @@ extern void *omap3_secure_ram_storage; extern void omap3_pm_off_mode_enable(int); extern void omap_sram_idle(void); -extern int omap3_can_sleep(void); extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state); extern int omap3_idle_init(void); extern int omap4_idle_init(void); +extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused); +extern int (*omap_pm_suspend)(void); #if defined(CONFIG_PM_OPP) extern int omap3_opp_init(void); diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index a4eb5c280435..5ca45ca76946 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -26,7 +26,6 @@ #include <linux/module.h> #include <linux/delay.h> #include <linux/clk.h> -#include <linux/io.h> #include <linux/irq.h> #include <linux/time.h> #include <linux/gpio.h> @@ -35,12 +34,13 @@ #include <asm/mach/irq.h> #include <asm/mach-types.h> -#include <mach/irqs.h> #include <plat/clock.h> #include <plat/sram.h> #include <plat/dma.h> #include <plat/board.h> +#include <mach/irqs.h> + #include "common.h" #include "prm2xxx_3xxx.h" #include "prm-regbits-24xx.h" @@ -49,23 +49,9 @@ #include "sdrc.h" #include "pm.h" #include "control.h" - #include "powerdomain.h" #include "clockdomain.h" -#ifdef CONFIG_SUSPEND -static suspend_state_t suspend_state = PM_SUSPEND_ON; -static inline bool is_suspending(void) -{ - return (suspend_state != PM_SUSPEND_ON); -} -#else -static inline bool is_suspending(void) -{ - return false; -} -#endif - static void (*omap2_sram_idle)(void); static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl, void __iomem *sdrc_power); @@ -85,7 +71,7 @@ static int omap2_fclks_active(void) return (f1 | f2) ? 1 : 0; } -static void omap2_enter_full_retention(void) +static int omap2_enter_full_retention(void) { u32 l; @@ -148,6 +134,8 @@ no_sleep: /* Mask future PRCM-to-MPU interrupts */ omap2_prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); + + return 0; } static int omap2_i2c_active(void) @@ -244,77 +232,6 @@ out: local_fiq_enable(); } -#ifdef CONFIG_SUSPEND -static int omap2_pm_begin(suspend_state_t state) -{ - disable_hlt(); - suspend_state = state; - return 0; -} - -static int omap2_pm_suspend(void) -{ - u32 wken_wkup, mir1; - - wken_wkup = omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN); - wken_wkup &= ~OMAP24XX_EN_GPT1_MASK; - omap2_prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN); - - /* Mask GPT1 */ - mir1 = omap_readl(0x480fe0a4); - omap_writel(1 << 5, 0x480fe0ac); - - omap2_enter_full_retention(); - - omap_writel(mir1, 0x480fe0a4); - omap2_prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN); - - return 0; -} - -static int omap2_pm_enter(suspend_state_t state) -{ - int ret = 0; - - switch (state) { - case PM_SUSPEND_STANDBY: - case PM_SUSPEND_MEM: - ret = omap2_pm_suspend(); - break; - default: - ret = -EINVAL; - } - - return ret; -} - -static void omap2_pm_end(void) -{ - suspend_state = PM_SUSPEND_ON; - enable_hlt(); -} - -static const struct platform_suspend_ops omap_pm_ops = { - .begin = omap2_pm_begin, - .enter = omap2_pm_enter, - .end = omap2_pm_end, - .valid = suspend_valid_only_mem, -}; -#else -static const struct platform_suspend_ops __initdata omap_pm_ops; -#endif /* CONFIG_SUSPEND */ - -/* XXX This function should be shareable between OMAP2xxx and OMAP3 */ -static int __init clkdms_setup(struct clockdomain *clkdm, void *unused) -{ - if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO) - clkdm_allow_idle(clkdm); - else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && - atomic_read(&clkdm->usecount) == 0) - clkdm_sleep(clkdm); - return 0; -} - static void __init prcm_setup_regs(void) { int i, num_mem_banks; @@ -356,9 +273,13 @@ static void __init prcm_setup_regs(void) clkdm_sleep(gfx_clkdm); /* Enable hardware-supervised idle for all clkdms */ - clkdm_for_each(clkdms_setup, NULL); + clkdm_for_each(omap_pm_clkdms_setup, NULL); clkdm_add_wkdep(mpu_clkdm, wkup_clkdm); +#ifdef CONFIG_SUSPEND + omap_pm_suspend = omap2_enter_full_retention; +#endif + /* REVISIT: Configure number of 32 kHz clock cycles for sys_clk * stabilisation */ omap2_prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD, @@ -459,7 +380,6 @@ static int __init omap2_pm_init(void) omap24xx_cpu_suspend_sz); } - suspend_set_ops(&omap_pm_ops); arm_pm_idle = omap2_pm_idle; return 0; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index b77df735fa6c..027a537d72b2 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -50,10 +50,6 @@ #include "sdrc.h" #include "control.h" -#ifdef CONFIG_SUSPEND -static suspend_state_t suspend_state = PM_SUSPEND_ON; -#endif - /* pm34xx errata defined in pm.h */ u16 pm34xx_errata; @@ -75,16 +71,6 @@ static struct powerdomain *mpu_pwrdm, *neon_pwrdm; static struct powerdomain *core_pwrdm, *per_pwrdm; static struct powerdomain *cam_pwrdm; -static inline void omap3_per_save_context(void) -{ - omap_gpio_save_context(); -} - -static inline void omap3_per_restore_context(void) -{ - omap_gpio_restore_context(); -} - static void omap3_enable_io_chain(void) { int timeout = 0; @@ -290,11 +276,6 @@ void omap_sram_idle(void) int core_prev_state, per_prev_state; u32 sdrc_pwr = 0; - pwrdm_clear_all_prev_pwrst(mpu_pwrdm); - pwrdm_clear_all_prev_pwrst(neon_pwrdm); - pwrdm_clear_all_prev_pwrst(core_pwrdm); - pwrdm_clear_all_prev_pwrst(per_pwrdm); - mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); switch (mpu_next_state) { case PWRDM_POWER_ON: @@ -332,8 +313,6 @@ void omap_sram_idle(void) if (per_next_state < PWRDM_POWER_ON) { per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; omap2_gpio_prepare_for_idle(per_going_off); - if (per_next_state == PWRDM_POWER_OFF) - omap3_per_save_context(); } /* CORE */ @@ -399,8 +378,6 @@ void omap_sram_idle(void) if (per_next_state < PWRDM_POWER_ON) { per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm); omap2_gpio_resume_after_idle(); - if (per_prev_state == PWRDM_POWER_OFF) - omap3_per_restore_context(); } /* Disable IO-PAD and IO-CHAIN wakeup */ @@ -477,50 +454,6 @@ restore: return ret; } -static int omap3_pm_enter(suspend_state_t unused) -{ - int ret = 0; - - switch (suspend_state) { - case PM_SUSPEND_STANDBY: - case PM_SUSPEND_MEM: - ret = omap3_pm_suspend(); - break; - default: - ret = -EINVAL; - } - - return ret; -} - -/* Hooks to enable / disable UART interrupts during suspend */ -static int omap3_pm_begin(suspend_state_t state) -{ - disable_hlt(); - suspend_state = state; - omap_prcm_irq_prepare(); - return 0; -} - -static void omap3_pm_end(void) -{ - suspend_state = PM_SUSPEND_ON; - enable_hlt(); - return; -} - -static void omap3_pm_finish(void) -{ - omap_prcm_irq_complete(); -} - -static const struct platform_suspend_ops omap_pm_ops = { - .begin = omap3_pm_begin, - .end = omap3_pm_end, - .enter = omap3_pm_enter, - .finish = omap3_pm_finish, - .valid = suspend_valid_only_mem, -}; #endif /* CONFIG_SUSPEND */ @@ -741,21 +674,6 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) } /* - * Enable hw supervised mode for all clockdomains if it's - * supported. Initiate sleep transition for other clockdomains, if - * they are not used - */ -static int __init clkdms_setup(struct clockdomain *clkdm, void *unused) -{ - if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO) - clkdm_allow_idle(clkdm); - else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && - atomic_read(&clkdm->usecount) == 0) - clkdm_sleep(clkdm); - return 0; -} - -/* * Push functions to SRAM * * The minimum set of functions is pushed to SRAM for execution: @@ -824,7 +742,7 @@ static int __init omap3_pm_init(void) goto err2; } - (void) clkdm_for_each(clkdms_setup, NULL); + (void) clkdm_for_each(omap_pm_clkdms_setup, NULL); mpu_pwrdm = pwrdm_lookup("mpu_pwrdm"); if (mpu_pwrdm == NULL) { @@ -843,8 +761,8 @@ static int __init omap3_pm_init(void) core_clkdm = clkdm_lookup("core_clkdm"); #ifdef CONFIG_SUSPEND - suspend_set_ops(&omap_pm_ops); -#endif /* CONFIG_SUSPEND */ + omap_pm_suspend = omap3_pm_suspend; +#endif arm_pm_idle = omap3_pm_idle; omap3_idle_init(); diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index c840689df24a..91e0b1c9b76c 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -83,59 +83,8 @@ static int omap4_pm_suspend(void) return 0; } - -static int omap4_pm_enter(suspend_state_t suspend_state) -{ - int ret = 0; - - switch (suspend_state) { - case PM_SUSPEND_STANDBY: - case PM_SUSPEND_MEM: - ret = omap4_pm_suspend(); - break; - default: - ret = -EINVAL; - } - - return ret; -} - -static int omap4_pm_begin(suspend_state_t state) -{ - disable_hlt(); - return 0; -} - -static void omap4_pm_end(void) -{ - enable_hlt(); - return; -} - -static const struct platform_suspend_ops omap_pm_ops = { - .begin = omap4_pm_begin, - .end = omap4_pm_end, - .enter = omap4_pm_enter, - .valid = suspend_valid_only_mem, -}; #endif /* CONFIG_SUSPEND */ -/* - * Enable hardware supervised mode for all clockdomains if it's - * supported. Initiate sleep transition for other clockdomains, if - * they are not used - */ -static int __init clkdms_setup(struct clockdomain *clkdm, void *unused) -{ - if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO) - clkdm_allow_idle(clkdm); - else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && - atomic_read(&clkdm->usecount) == 0) - clkdm_sleep(clkdm); - return 0; -} - - static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) { struct power_state *pwrst; @@ -247,11 +196,11 @@ static int __init omap4_pm_init(void) goto err2; } - (void) clkdm_for_each(clkdms_setup, NULL); + (void) clkdm_for_each(omap_pm_clkdms_setup, NULL); #ifdef CONFIG_SUSPEND - suspend_set_ops(&omap_pm_ops); -#endif /* CONFIG_SUSPEND */ + omap_pm_suspend = omap4_pm_suspend; +#endif /* Overwrite the default cpu_do_idle() */ arm_pm_idle = omap_default_idle; diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.c b/arch/arm/mach-omap2/prcm_mpu44xx.c index ca669b50f390..928dbd4f20ed 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.c +++ b/arch/arm/mach-omap2/prcm_mpu44xx.c @@ -15,8 +15,8 @@ #include <linux/err.h> #include <linux/io.h> +#include "iomap.h" #include "common.h" - #include "prcm_mpu44xx.h" #include "cm-regbits-44xx.h" diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index a1d6154dc120..eac623c7c3d8 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -17,11 +17,12 @@ #include <linux/err.h> #include <linux/io.h> -#include "common.h" #include <plat/cpu.h> #include <plat/irqs.h> #include <plat/prcm.h> +#include "iomap.h" +#include "common.h" #include "vp.h" #include "prm44xx.h" #include "prm-regbits-44xx.h" diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c index f6de5bc6b12a..9b3898a3ac9b 100644 --- a/arch/arm/mach-omap2/prminst44xx.c +++ b/arch/arm/mach-omap2/prminst44xx.c @@ -16,8 +16,8 @@ #include <linux/err.h> #include <linux/io.h> +#include "iomap.h" #include "common.h" - #include "prm44xx.h" #include "prminst44xx.h" #include "prm-regbits-44xx.h" diff --git a/arch/arm/mach-omap2/sdram-nokia.c b/arch/arm/mach-omap2/sdram-nokia.c index 7479d7ea1379..845c4fd2b125 100644 --- a/arch/arm/mach-omap2/sdram-nokia.c +++ b/arch/arm/mach-omap2/sdram-nokia.c @@ -17,7 +17,6 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/io.h> #include "common.h" #include <plat/clock.h> #include <plat/sdrc.h> diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index 791a63cdceb2..1133bb2f632b 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -24,13 +24,15 @@ #include <linux/clk.h> #include <linux/io.h> -#include "common.h" +#include <plat/hardware.h> #include <plat/clock.h> #include <plat/sram.h> +#include <plat/sdrc.h> +#include "iomap.h" +#include "common.h" #include "prm2xxx_3xxx.h" #include "clock.h" -#include <plat/sdrc.h> #include "sdrc.h" /* Memory timing, DLL mode flags */ diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index f590afc1f673..0cdd359a128e 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -54,11 +54,9 @@ struct omap_uart_state { int num; - int can_sleep; struct list_head node; struct omap_hwmod *oh; - struct platform_device *pdev; }; static LIST_HEAD(uart_list); @@ -381,8 +379,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt); - uart->pdev = pdev; - oh->dev_attr = uart; if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads) diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S index b5071a47ec39..d4bf904d84ab 100644 --- a/arch/arm/mach-omap2/sleep24xx.S +++ b/arch/arm/mach-omap2/sleep24xx.S @@ -27,7 +27,6 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#include <mach/io.h> #include <plat/omap24xx.h> diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index f2ea1bd1c691..1f62f23673fb 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -23,10 +23,13 @@ * MA 02111-1307 USA */ #include <linux/linkage.h> + #include <asm/assembler.h> + +#include <plat/hardware.h> #include <plat/sram.h> -#include <mach/io.h> +#include "iomap.h" #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index ff9b9dbcb30e..ee0bfcc1410f 100644 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -29,10 +29,12 @@ * These crashes may be intermittent. */ #include <linux/linkage.h> + #include <asm/assembler.h> -#include <mach/io.h> + #include <mach/hardware.h> +#include "iomap.h" #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index 76730209fa0e..d4d39ef04769 100644 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -29,10 +29,12 @@ * These crashes may be intermittent. */ #include <linux/linkage.h> + #include <asm/assembler.h> -#include <mach/io.h> + #include <mach/hardware.h> +#include "iomap.h" #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 6f5849aaa7c0..df5a21322b0a 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -26,11 +26,12 @@ * MA 02111-1307 USA */ #include <linux/linkage.h> + #include <asm/assembler.h> -#include <mach/hardware.h> -#include <mach/io.h> +#include <mach/hardware.h> +#include "iomap.h" #include "sdrc.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 5261a7ed0999..68d89cb96af0 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -2,42 +2,6 @@ # # Licensed under GPLv2 -config CPU_S3C2410 - bool - depends on ARCH_S3C2410 - select CPU_ARM920T - select S3C2410_CLOCK - select CPU_LLSERIAL_S3C2410 - select S3C2410_PM if PM - select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX - help - Support for S3C2410 and S3C2410A family from the S3C24XX line - of Samsung Mobile CPUs. - -config CPU_S3C2410_DMA - bool - depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442) - default y if CPU_S3C2410 || CPU_S3C2442 - help - DMA device selection for S3C2410 and compatible CPUs - -config S3C2410_PM - bool - help - Power Management code common to S3C2410 and better - -config SIMTEC_NOR - bool - help - Internal node to specify machine has simtec NOR mapping - -config MACH_BAST_IDE - bool - select HAVE_PATA_PLATFORM - help - Internal node for machines with an BAST style IDE - interface - # cpu frequency scaling support config S3C2410_CPUFREQ @@ -54,121 +18,3 @@ config S3C2410_PLLTABLE help Select the PLL table for the S3C2410 -menu "S3C2410 Machines" - -config ARCH_SMDK2410 - bool "SMDK2410/A9M2410" - select CPU_S3C2410 - select MACH_SMDK - help - Say Y here if you are using the SMDK2410 or the derived module A9M2410 - <http://www.fsforth.de> - -config ARCH_H1940 - bool "IPAQ H1940" - select CPU_S3C2410 - select PM_H1940 if PM - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - select S3C2410_SETUP_TS - help - Say Y here if you are using the HP IPAQ H1940 - -config H1940BT - tristate "Control the state of H1940 bluetooth chip" - depends on ARCH_H1940 - select RFKILL - help - This is a simple driver that is able to control - the state of built in bluetooth chip on h1940. - -config PM_H1940 - bool - help - Internal node for H1940 and related PM - -config MACH_N30 - bool "Acer N30 family" - select CPU_S3C2410 - select MACH_N35 - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you want suppt for the Acer N30, Acer N35, - Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs. - -config MACH_N35 - bool - help - Internal node in order to enable support for Acer N35 if Acer N30 is - selected. - -config ARCH_BAST - bool "Simtec Electronics BAST (EB2410ITX)" - select CPU_S3C2410 - select S3C2410_IOTIMING if S3C2410_CPUFREQ - select PM_SIMTEC if PM - select SIMTEC_NOR - select MACH_BAST_IDE - select S3C24XX_DCLK - select ISA - select S3C_DEV_HWMON - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the Simtec Electronics EB2410ITX - development board (also known as BAST) - -config MACH_OTOM - bool "NexVision OTOM Board" - select CPU_S3C2410 - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the Nex Vision OTOM board - -config MACH_AML_M5900 - bool "AML M5900 Series" - select CPU_S3C2410 - select PM_SIMTEC if PM - select S3C_DEV_USB_HOST - help - Say Y here if you are using the American Microsystems M5900 Series - <http://www.amltd.com> - -config BAST_PC104_IRQ - bool "BAST PC104 IRQ support" - depends on ARCH_BAST - default y - help - Say Y here to enable the PC104 IRQ routing on the - Simtec BAST (EB2410ITX) - -config MACH_TCT_HAMMER - bool "TCT Hammer Board" - select CPU_S3C2410 - select S3C_DEV_USB_HOST - help - Say Y here if you are using the TinCanTools Hammer Board - <http://www.tincantools.com> - -config MACH_VR1000 - bool "Thorcom VR1000" - select PM_SIMTEC if PM - select S3C24XX_DCLK - select SIMTEC_NOR - select MACH_BAST_IDE - select CPU_S3C2410 - select S3C_DEV_USB_HOST - help - Say Y here if you are using the Thorcom VR1000 board. - -config MACH_QT2410 - bool "QT2410" - select CPU_S3C2410 - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the Armzone QT2410 - -endmenu diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 782fd81144e9..6b9a316e0041 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -9,32 +9,6 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_CPU_S3C2410) += s3c2410.o -obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o -obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o -obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o -# Machine support - -obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o -obj-$(CONFIG_ARCH_H1940) += mach-h1940.o -obj-$(CONFIG_H1940BT) += h1940-bluetooth.o -obj-$(CONFIG_PM_H1940) += pm-h1940.o -obj-$(CONFIG_MACH_N30) += mach-n30.o -obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o -obj-$(CONFIG_MACH_OTOM) += mach-otom.o -obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o -obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o -obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o -obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o -obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o - -# Common bits of machine support - -obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o - -# machine additions - -obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o diff --git a/arch/arm/mach-s3c2410/common.h b/arch/arm/mach-s3c2410/common.h deleted file mode 100644 index f65dc8062961..000000000000 --- a/arch/arm/mach-s3c2410/common.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Common Header for S3C2410 machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_S3C2410_COMMON_H -#define __ARCH_ARM_MACH_S3C2410_COMMON_H - -void s3c2410_restart(char mode, const char *cmd); - -#endif /* __ARCH_ARM_MACH_S3C2410_COMMON_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h deleted file mode 100644 index 4d9588373aa5..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/spi.h +++ /dev/null @@ -1,38 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/spi.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - SPI Controller platform_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SPI_H -#define __ASM_ARCH_SPI_H __FILE__ - -struct s3c2410_spi_info { - int pin_cs; /* simple gpio cs */ - unsigned int num_cs; /* total chipselects */ - int bus_num; /* bus number to use. */ - - unsigned int use_fiq:1; /* use fiq */ - - void (*gpio_setup)(struct s3c2410_spi_info *spi, int enable); - void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); -}; - -/* Standard setup / suspend routines for SPI GPIO pins. */ - -extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, - int enable); - -extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, - int enable); - -extern void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi, - int enable); - -#endif /* __ASM_ARCH_SPI_H */ diff --git a/arch/arm/mach-s3c2410/usb-simtec.h b/arch/arm/mach-s3c2410/usb-simtec.h deleted file mode 100644 index 03842ede9e71..000000000000 --- a/arch/arm/mach-s3c2410/usb-simtec.h +++ /dev/null @@ -1,16 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/usb-simtec.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://www.simtec.co.uk/products/EB2410ITX/ - * - * Simtec BAST and Thorcom VR1000 USB port support functions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -extern int usb_simtec_init(void); - diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index b8b9029e9f2d..c5256f4e90bb 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -2,41 +2,6 @@ # # Licensed under GPLv2 -config CPU_S3C2412 - bool - depends on ARCH_S3C2410 - select CPU_ARM926T - select CPU_LLSERIAL_S3C2440 - select S3C2412_PM if PM - select S3C2412_DMA if S3C2410_DMA - help - Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line - -config CPU_S3C2412_ONLY - bool - depends on ARCH_S3C2410 && !CPU_S3C2410 && \ - !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ - !CPU_S3C2443 && CPU_S3C2412 - default y if CPU_S3C2412 - -config S3C2412_DMA - bool - depends on CPU_S3C2412 - help - Internal config node for S3C2412 DMA support - -config S3C2412_PM - bool - select S3C2412_PM_SLEEP - help - Internal config node to apply S3C2412 power management - -config S3C2412_PM_SLEEP - bool - help - Internal config node to apply sleep for S3C2412 power management. - Can be selected by another SoCs with similar sleep procedure. - # Note, the S3C2412 IOtiming support is in plat-s3c24xx config S3C2412_CPUFREQ @@ -46,53 +11,3 @@ config S3C2412_CPUFREQ default y help CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. - -menu "S3C2412 Machines" - -config MACH_JIVE - bool "Logitech Jive" - select CPU_S3C2412 - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the Logitech Jive. - -config MACH_JIVE_SHOW_BOOTLOADER - bool "Allow access to bootloader partitions in MTD (EXPERIMENTAL)" - depends on MACH_JIVE && EXPERIMENTAL - -config MACH_SMDK2413 - bool "SMDK2413" - select CPU_S3C2412 - select MACH_S3C2413 - select MACH_SMDK - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using an SMDK2413 - -config MACH_S3C2413 - bool - help - Internal node for S3C2413 version of SMDK2413, so that - machine_is_s3c2413() will work when MACH_SMDK2413 is - selected - -config MACH_SMDK2412 - bool "SMDK2412" - select MACH_SMDK2413 - help - Say Y here if you are using an SMDK2412 - - Note, this shares support with SMDK2413, so will automatically - select MACH_SMDK2413. - -config MACH_VSTMS - bool "VMSTMS" - select CPU_S3C2412 - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using an VSTMS board - -endmenu diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile index 7e4d95fa8a97..41a6c279fb2f 100644 --- a/arch/arm/mach-s3c2412/Makefile +++ b/arch/arm/mach-s3c2412/Makefile @@ -9,16 +9,4 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_CPU_S3C2412) += s3c2412.o -obj-$(CONFIG_CPU_S3C2412) += irq.o -obj-$(CONFIG_CPU_S3C2412) += clock.o -obj-$(CONFIG_S3C2412_DMA) += dma.o -obj-$(CONFIG_S3C2412_PM) += pm.o -obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o obj-$(CONFIG_S3C2412_CPUFREQ) += cpu-freq.o - -# Machine support - -obj-$(CONFIG_MACH_JIVE) += mach-jive.o -obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o -obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig deleted file mode 100644 index 84c7b03e5a30..000000000000 --- a/arch/arm/mach-s3c2416/Kconfig +++ /dev/null @@ -1,60 +0,0 @@ -# arch/arm/mach-s3c2416/Kconfig -# -# Copyright 2009 Yauhen Kharuzhy <jekhor@gmail.com> -# -# Licensed under GPLv2 - -# note, this also supports the S3C2450 which is so similar it has the same -# ID code as the S3C2416. - -config CPU_S3C2416 - bool - depends on ARCH_S3C2410 - select CPU_ARM926T - select S3C2416_DMA if S3C2410_DMA - select CPU_LLSERIAL_S3C2440 - select SAMSUNG_CLKSRC - select S3C2443_CLOCK - help - Support for the S3C2416 SoC from the S3C24XX line - -config S3C2416_DMA - bool - depends on CPU_S3C2416 - help - Internal config node for S3C2416 DMA support - -config S3C2416_PM - bool - select S3C2412_PM_SLEEP - help - Internal config node to apply S3C2416 power management - -config S3C2416_SETUP_SDHCI - bool - select S3C2416_SETUP_SDHCI_GPIO - help - Internal helper functions for S3C2416 based SDHCI systems - -config S3C2416_SETUP_SDHCI_GPIO - bool - help - Common setup code for SDHCI gpio. - -menu "S3C2416 Machines" - -config MACH_SMDK2416 - bool "SMDK2416" - select CPU_S3C2416 - select MACH_SMDK - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - select S3C2416_SETUP_SDHCI - select S3C2416_PM if PM - help - Say Y here if you are using an SMDK2416 - -endmenu diff --git a/arch/arm/mach-s3c2416/Makefile b/arch/arm/mach-s3c2416/Makefile deleted file mode 100644 index ca0cd227f873..000000000000 --- a/arch/arm/mach-s3c2416/Makefile +++ /dev/null @@ -1,22 +0,0 @@ -# arch/arm/mach-s3c2416/Makefile -# -# Copyright 2009 Yauhen Kharuzhy <jekhor@gmail.com> -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock.o -obj-$(CONFIG_CPU_S3C2416) += irq.o -obj-$(CONFIG_S3C2416_PM) += pm.o -#obj-$(CONFIG_S3C2416_DMA) += dma.o - -# Device setup -obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o - -# Machine support - -obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 914e620f1257..ece7a10fe3c6 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -2,35 +2,6 @@ # # Licensed under GPLv2 -config CPU_S3C2440 - bool - select CPU_ARM920T - select S3C2410_CLOCK - select S3C2410_PM if PM - select S3C2440_DMA if S3C2410_DMA - select CPU_S3C244X - select CPU_LLSERIAL_S3C2440 - help - Support for S3C2440 Samsung Mobile CPU based systems. - -config CPU_S3C2442 - bool - select CPU_ARM920T - select S3C2410_CLOCK - select S3C2410_PM if PM - select CPU_S3C244X - select CPU_LLSERIAL_S3C2440 - help - Support for S3C2442 Samsung Mobile CPU based systems. - -config CPU_S3C244X - bool - depends on CPU_S3C2440 || CPU_S3C2442 - help - Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems. - - - config S3C2440_CPUFREQ bool "S3C2440/S3C2442 CPU Frequency scaling support" depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442) @@ -64,139 +35,3 @@ config S3C2440_PLL_16934400 default y if CPU_FREQ_S3C24XX_PLL help PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. - -config S3C2440_DMA - bool - depends on CPU_S3C2440 - help - Support for S3C2440 specific DMA code5A - -menu "S3C2440 and S3C2442 Machines" - -config MACH_ANUBIS - bool "Simtec Electronics ANUBIS" - select CPU_S3C2440 - select S3C24XX_DCLK - select PM_SIMTEC if PM - select HAVE_PATA_PLATFORM - select S3C24XX_GPIO_EXTRA64 - select S3C2440_XTAL_12000000 - select S3C_DEV_USB_HOST - help - Say Y here if you are using the Simtec Electronics ANUBIS - development system - -config MACH_NEO1973_GTA02 - bool "Openmoko GTA02 / Freerunner phone" - select CPU_S3C2442 - select MFD_PCF50633 - select PCF50633_GPIO - select I2C - select POWER_SUPPLY - select MACH_NEO1973 - select S3C2410_PWM - select S3C_DEV_USB_HOST - help - Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone - -config MACH_OSIRIS - bool "Simtec IM2440D20 (OSIRIS) module" - select CPU_S3C2440 - select S3C24XX_DCLK - select PM_SIMTEC if PM - select S3C24XX_GPIO_EXTRA128 - select S3C2440_XTAL_12000000 - select S3C2410_IOTIMING if S3C2440_CPUFREQ - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the Simtec IM2440D20 module, also - known as the Osiris. - -config MACH_OSIRIS_DVS - tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver" - depends on MACH_OSIRIS - select TPS65010 - help - Say Y/M here if you want to have dynamic voltage scaling support - on the Simtec IM2440D20 (OSIRIS) module via the TPS65011. - - The DVS driver alters the voltage supplied to the ARM core - depending on the frequency it is running at. The driver itself - does not do any of the frequency alteration, which is left up - to the cpufreq driver. - -config MACH_RX3715 - bool "HP iPAQ rx3715" - select CPU_S3C2440 - select S3C2440_XTAL_16934400 - select PM_H1940 if PM - select S3C_DEV_NAND - help - Say Y here if you are using the HP iPAQ rx3715. - -config ARCH_S3C2440 - bool "SMDK2440" - select CPU_S3C2440 - select S3C2440_XTAL_16934400 - select MACH_SMDK - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the SMDK2440. - -config MACH_NEXCODER_2440 - bool "NexVision NEXCODER 2440 Light Board" - select CPU_S3C2440 - select S3C2440_XTAL_12000000 - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board - -config SMDK2440_CPU2440 - bool "SMDK2440 with S3C2440 CPU module" - default y if ARCH_S3C2440 - select S3C2440_XTAL_16934400 - select CPU_S3C2440 - -config SMDK2440_CPU2442 - bool "SMDM2440 with S3C2442 CPU module" - select CPU_S3C2442 - -config MACH_AT2440EVB - bool "Avantech AT2440EVB development board" - select CPU_S3C2440 - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the AT2440EVB development board - -config MACH_MINI2440 - bool "MINI2440 development board" - select CPU_S3C2440 - select EEPROM_AT24 - select NEW_LEDS - select LEDS_CLASS - select LEDS_TRIGGER - select LEDS_TRIGGER_BACKLIGHT - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - help - Say Y here to select support for the MINI2440. Is a 10cm x 10cm board - available via various sources. It can come with a 3.5" or 7" touch LCD. - -config MACH_RX1950 - bool "HP iPAQ rx1950" - select CPU_S3C2442 - select S3C24XX_DCLK - select PM_H1940 if PM - select I2C - select S3C2410_PWM - select S3C_DEV_NAND - select S3C2410_IOTIMING if S3C2440_CPUFREQ - select S3C2440_XTAL_16934400 - help - Say Y here if you're using HP iPAQ rx1950 - -endmenu diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile index d5440fa34b04..c46092439814 100644 --- a/arch/arm/mach-s3c2440/Makefile +++ b/arch/arm/mach-s3c2440/Makefile @@ -9,33 +9,9 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_CPU_S3C2440) += s3c2440.o dsc.o -obj-$(CONFIG_CPU_S3C2442) += s3c2442.o +obj-$(CONFIG_CPU_S3C2440) += dsc.o -obj-$(CONFIG_CPU_S3C2440) += irq.o -obj-$(CONFIG_CPU_S3C2440) += clock.o -obj-$(CONFIG_S3C2440_DMA) += dma.o - -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o - -# Machine support - -obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o -obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o -obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o -obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o -obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o -obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o -obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o -obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o -obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o - -# extra machine support - -obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o diff --git a/arch/arm/mach-s3c2440/common.h b/arch/arm/mach-s3c2440/common.h deleted file mode 100644 index 0c1eb1dfc534..000000000000 --- a/arch/arm/mach-s3c2440/common.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Common Header for S3C2440 machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H -#define __ARCH_ARM_MACH_S3C2440_COMMON_H - -void s3c244x_restart(char mode, const char *cmd); - -#endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */ diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig deleted file mode 100644 index 8814031516ce..000000000000 --- a/arch/arm/mach-s3c2443/Kconfig +++ /dev/null @@ -1,32 +0,0 @@ -# Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 - -config CPU_S3C2443 - bool - depends on ARCH_S3C2410 - select CPU_ARM920T - select S3C2443_DMA if S3C2410_DMA - select CPU_LLSERIAL_S3C2440 - select SAMSUNG_CLKSRC - select S3C2443_CLOCK - help - Support for the S3C2443 SoC from the S3C24XX line - -config S3C2443_DMA - bool - depends on CPU_S3C2443 - help - Internal config node for S3C2443 DMA support - -menu "S3C2443 Machines" - -config MACH_SMDK2443 - bool "SMDK2443" - select CPU_S3C2443 - select MACH_SMDK - select S3C_DEV_HSMMC1 - help - Say Y here if you are using an SMDK2443 - -endmenu diff --git a/arch/arm/mach-s3c2443/Makefile b/arch/arm/mach-s3c2443/Makefile deleted file mode 100644 index d1843c9eb8bd..000000000000 --- a/arch/arm/mach-s3c2443/Makefile +++ /dev/null @@ -1,20 +0,0 @@ -# arch/arm/mach-s3c2443/Makefile -# -# Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -obj-$(CONFIG_CPU_S3C2443) += s3c2443.o -obj-$(CONFIG_CPU_S3C2443) += irq.o -obj-$(CONFIG_CPU_S3C2443) += clock.o - -obj-$(CONFIG_S3C2443_DMA) += dma.o - -# Machine support - -obj-$(CONFIG_MACH_SMDK2443) += mach-smdk2443.o diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig new file mode 100644 index 000000000000..0f3a327ebcaa --- /dev/null +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -0,0 +1,538 @@ +# arch/arm/mach-s3c24xx/Kconfig +# +# Copyright (c) 2012 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +if ARCH_S3C24XX + +menu "SAMSUNG S3C24XX SoCs Support" + +comment "S3C24XX SoCs" + +config CPU_S3C2410 + bool "SAMSUNG S3C2410" + default y + select CPU_ARM920T + select S3C2410_CLOCK + select CPU_LLSERIAL_S3C2410 + select S3C2410_PM if PM + select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX + help + Support for S3C2410 and S3C2410A family from the S3C24XX line + of Samsung Mobile CPUs. + +config CPU_S3C2412 + bool "SAMSUNG S3C2412" + depends on ARCH_S3C24XX + select CPU_ARM926T + select CPU_LLSERIAL_S3C2440 + select S3C2412_PM if PM + select S3C2412_DMA if S3C24XX_DMA + help + Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line + +config CPU_S3C2416 + bool "SAMSUNG S3C2416/S3C2450" + depends on ARCH_S3C24XX + select CPU_ARM926T + select CPU_LLSERIAL_S3C2440 + select SAMSUNG_CLKSRC + select S3C2443_COMMON + select S3C2443_DMA if S3C24XX_DMA + select S3C2416_PM if PM + help + Support for the S3C2416 SoC from the S3C24XX line + +config CPU_S3C2440 + bool "SAMSUNG S3C2440" + select CPU_ARM920T + select CPU_LLSERIAL_S3C2440 + select S3C2410_CLOCK + select S3C2410_PM if PM + select S3C2440_DMA if S3C24XX_DMA + help + Support for S3C2440 Samsung Mobile CPU based systems. + +config CPU_S3C2442 + bool "SAMSUNG S3C2442" + select CPU_ARM920T + select CPU_LLSERIAL_S3C2440 + select S3C2410_CLOCK + select S3C2410_PM if PM + help + Support for S3C2442 Samsung Mobile CPU based systems. + +config CPU_S3C244X + def_bool y + depends on CPU_S3C2440 || CPU_S3C2442 + +config CPU_S3C2443 + bool "SAMSUNG S3C2443" + depends on ARCH_S3C24XX + select CPU_ARM920T + select CPU_LLSERIAL_S3C2440 + select SAMSUNG_CLKSRC + select S3C2443_COMMON + select S3C2443_DMA if S3C24XX_DMA + help + Support for the S3C2443 SoC from the S3C24XX line + +# common code + +config S3C24XX_SMDK + bool + help + Common machine code for SMDK2410 and SMDK2440 + +config S3C24XX_SIMTEC_AUDIO + bool + depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS) + default y + help + Add audio devices for common Simtec S3C24XX boards + +config S3C24XX_SIMTEC_PM + bool + help + Common power management code for systems that are + compatible with the Simtec style of power management + +config S3C24XX_SIMTEC_USB + bool + help + USB management code for common Simtec S3C24XX boards + +config S3C24XX_SETUP_TS + bool + help + Compile in platform device definition for Samsung TouchScreen. + +# cpu-specific sections + +if CPU_S3C2410 + +config S3C2410_DMA + bool + depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442) + default y if CPU_S3C2410 || CPU_S3C2442 + help + DMA device selection for S3C2410 and compatible CPUs + +config S3C2410_PM + bool + help + Power Management code common to S3C2410 and better + +config S3C24XX_SIMTEC_NOR + bool + help + Internal node to specify machine has simtec NOR mapping + +config MACH_BAST_IDE + bool + select HAVE_PATA_PLATFORM + help + Internal node for machines with an BAST style IDE + interface + +comment "S3C2410 Boards" + +# +# The "S3C2410 Boards" list is ordered alphabetically by option text. +# (without ARCH_ or MACH_) +# + +config MACH_AML_M5900 + bool "AML M5900 Series" + select S3C24XX_SIMTEC_PM if PM + select S3C_DEV_USB_HOST + help + Say Y here if you are using the American Microsystems M5900 Series + <http://www.amltd.com> + +config ARCH_BAST + bool "Simtec Electronics BAST (EB2410ITX)" + select S3C2410_IOTIMING if S3C2410_CPUFREQ + select S3C24XX_SIMTEC_PM if PM + select S3C24XX_SIMTEC_NOR + select S3C24XX_SIMTEC_USB + select MACH_BAST_IDE + select S3C24XX_DCLK + select ISA + select S3C_DEV_HWMON + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using the Simtec Electronics EB2410ITX + development board (also known as BAST) + +config BAST_PC104_IRQ + bool "BAST PC104 IRQ support" + depends on ARCH_BAST + default y + help + Say Y here to enable the PC104 IRQ routing on the + Simtec BAST (EB2410ITX) + +config ARCH_H1940 + bool "IPAQ H1940" + select PM_H1940 if PM + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + select S3C24XX_SETUP_TS + help + Say Y here if you are using the HP IPAQ H1940 + +config H1940BT + tristate "Control the state of H1940 bluetooth chip" + depends on ARCH_H1940 + select RFKILL + help + This is a simple driver that is able to control + the state of built in bluetooth chip on h1940. + +config PM_H1940 + bool + help + Internal node for H1940 and related PM + +config MACH_N30 + bool "Acer N30 family" + select MACH_N35 + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you want suppt for the Acer N30, Acer N35, + Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs. + +config MACH_OTOM + bool "NexVision OTOM Board" + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using the Nex Vision OTOM board + +config MACH_QT2410 + bool "QT2410" + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using the Armzone QT2410 + +config ARCH_SMDK2410 + bool "SMDK2410/A9M2410" + select S3C24XX_SMDK + help + Say Y here if you are using the SMDK2410 or the derived module A9M2410 + <http://www.fsforth.de> + +config MACH_TCT_HAMMER + bool "TCT Hammer Board" + select S3C_DEV_USB_HOST + help + Say Y here if you are using the TinCanTools Hammer Board + <http://www.tincantools.com> + +config MACH_VR1000 + bool "Thorcom VR1000" + select S3C24XX_SIMTEC_PM if PM + select S3C24XX_DCLK + select S3C24XX_SIMTEC_NOR + select MACH_BAST_IDE + select S3C_DEV_USB_HOST + select S3C24XX_SIMTEC_USB + help + Say Y here if you are using the Thorcom VR1000 board. + +endif # CPU_S3C2410 + +config S3C2412_PM_SLEEP + bool + help + Internal config node to apply sleep for S3C2412 power management. + Can be selected by another SoCs such as S3C2416 with similar + sleep procedure. + +if CPU_S3C2412 + +config CPU_S3C2412_ONLY + bool + depends on ARCH_S3C24XX && !CPU_S3C2410 && \ + !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ + !CPU_S3C2443 && CPU_S3C2412 + default y + +config S3C2412_DMA + bool + help + Internal config node for S3C2412 DMA support + +config S3C2412_PM + bool + help + Internal config node to apply S3C2412 power management + +comment "S3C2412 Boards" + +# +# The "S3C2412 Boards" list is ordered alphabetically by option text. +# (without ARCH_ or MACH_) +# + +config MACH_JIVE + bool "Logitech Jive" + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using the Logitech Jive. + +config MACH_JIVE_SHOW_BOOTLOADER + bool "Allow access to bootloader partitions in MTD (EXPERIMENTAL)" + depends on MACH_JIVE && EXPERIMENTAL + +config MACH_S3C2413 + bool + help + Internal node for S3C2413 version of SMDK2413, so that + machine_is_s3c2413() will work when MACH_SMDK2413 is + selected + +config MACH_SMDK2412 + bool "SMDK2412" + select MACH_SMDK2413 + help + Say Y here if you are using an SMDK2412 + + Note, this shares support with SMDK2413, so will automatically + select MACH_SMDK2413. + +config MACH_SMDK2413 + bool "SMDK2413" + select MACH_S3C2413 + select S3C24XX_SMDK + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using an SMDK2413 + +config MACH_VSTMS + bool "VMSTMS" + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using an VSTMS board + +endif # CPU_S3C2412 + +if CPU_S3C2416 + +config S3C2416_PM + bool + select S3C2412_PM_SLEEP + help + Internal config node to apply S3C2416 power management + +config S3C2416_SETUP_SDHCI + bool + select S3C2416_SETUP_SDHCI_GPIO + help + Internal helper functions for S3C2416 based SDHCI systems + +config S3C2416_SETUP_SDHCI_GPIO + bool + help + Common setup code for SDHCI gpio. + +comment "S3C2416 Boards" + +config MACH_SMDK2416 + bool "SMDK2416" + select S3C24XX_SMDK + select S3C_DEV_FB + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_NAND + select S3C_DEV_USB_HOST + select S3C2416_SETUP_SDHCI + help + Say Y here if you are using an SMDK2416 + +endif # CPU_S3C2416 + +if CPU_S3C2440 + +config S3C2440_DMA + bool + help + Support for S3C2440 specific DMA code5A + +comment "S3C2440 Boards" + +# +# The "S3C2440 Boards" list is ordered alphabetically by option text. +# (without ARCH_ or MACH_) +# + +config MACH_ANUBIS + bool "Simtec Electronics ANUBIS" + select S3C24XX_DCLK + select S3C24XX_SIMTEC_PM if PM + select HAVE_PATA_PLATFORM + select S3C24XX_GPIO_EXTRA64 + select S3C2440_XTAL_12000000 + select S3C_DEV_USB_HOST + help + Say Y here if you are using the Simtec Electronics ANUBIS + development system + +config MACH_AT2440EVB + bool "Avantech AT2440EVB development board" + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using the AT2440EVB development board + +config MACH_MINI2440 + bool "MINI2440 development board" + select EEPROM_AT24 + select NEW_LEDS + select LEDS_CLASS + select LEDS_TRIGGER + select LEDS_TRIGGER_BACKLIGHT + select S3C_DEV_NAND + select S3C_DEV_USB_HOST + help + Say Y here to select support for the MINI2440. Is a 10cm x 10cm board + available via various sources. It can come with a 3.5" or 7" touch LCD. + +config MACH_NEXCODER_2440 + bool "NexVision NEXCODER 2440 Light Board" + select S3C2440_XTAL_12000000 + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board + +config MACH_OSIRIS + bool "Simtec IM2440D20 (OSIRIS) module" + select S3C24XX_DCLK + select S3C24XX_SIMTEC_PM if PM + select S3C24XX_GPIO_EXTRA128 + select S3C2440_XTAL_12000000 + select S3C2410_IOTIMING if S3C2440_CPUFREQ + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using the Simtec IM2440D20 module, also + known as the Osiris. + +config MACH_OSIRIS_DVS + tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver" + depends on MACH_OSIRIS + select TPS65010 + help + Say Y/M here if you want to have dynamic voltage scaling support + on the Simtec IM2440D20 (OSIRIS) module via the TPS65011. + + The DVS driver alters the voltage supplied to the ARM core + depending on the frequency it is running at. The driver itself + does not do any of the frequency alteration, which is left up + to the cpufreq driver. + +config MACH_RX3715 + bool "HP iPAQ rx3715" + select S3C2440_XTAL_16934400 + select PM_H1940 if PM + select S3C_DEV_NAND + help + Say Y here if you are using the HP iPAQ rx3715. + +config ARCH_S3C2440 + bool "SMDK2440" + select S3C2440_XTAL_16934400 + select S3C24XX_SMDK + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using the SMDK2440. + +config SMDK2440_CPU2440 + bool "SMDK2440 with S3C2440 CPU module" + default y if ARCH_S3C2440 + select S3C2440_XTAL_16934400 + +endif # CPU_S3C2440 + +if CPU_S3C2442 + +comment "S3C2442 Boards" + +# +# The "S3C2442 Boards" list is ordered alphabetically by option text. +# (without ARCH_ or MACH_) +# + +config MACH_NEO1973_GTA02 + bool "Openmoko GTA02 / Freerunner phone" + select MFD_PCF50633 + select PCF50633_GPIO + select I2C + select POWER_SUPPLY + select MACH_NEO1973 + select S3C2410_PWM + select S3C_DEV_USB_HOST + help + Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone + +config MACH_RX1950 + bool "HP iPAQ rx1950" + select S3C24XX_DCLK + select PM_H1940 if PM + select I2C + select S3C2410_PWM + select S3C_DEV_NAND + select S3C2410_IOTIMING if S3C2440_CPUFREQ + select S3C2440_XTAL_16934400 + help + Say Y here if you're using HP iPAQ rx1950 + +config SMDK2440_CPU2442 + bool "SMDM2440 with S3C2442 CPU module" + +endif # CPU_S3C2440 + +if CPU_S3C2443 || CPU_S3C2416 + +config S3C2443_COMMON + bool + help + Common code for the S3C2443 and similar processors, which includes + the S3C2416 and S3C2450. + +config S3C2443_DMA + bool + help + Internal config node for S3C2443 DMA support + +endif # CPU_S3C2443 || CPU_S3C2416 + +if CPU_S3C2443 + +comment "S3C2443 Boards" + +config MACH_SMDK2443 + bool "SMDK2443" + select S3C24XX_SMDK + select S3C_DEV_HSMMC1 + help + Say Y here if you are using an SMDK2443 + +endif # CPU_S3C2443 + +endmenu # SAMSUNG S3C24XX SoCs Support + +endif # ARCH_S3C24XX diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile new file mode 100644 index 000000000000..3518fe812d5f --- /dev/null +++ b/arch/arm/mach-s3c24xx/Makefile @@ -0,0 +1,95 @@ +# arch/arm/mach-s3c24xx/Makefile +# +# Copyright (c) 2012 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +# core + +obj-$(CONFIG_CPU_S3C2410) += s3c2410.o +obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o +obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o + +obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o +obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o +obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o +obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o + +obj-$(CONFIG_CPU_S3C2416) += s3c2416.o irq-s3c2416.o clock-s3c2416.o +obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o + +obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o +obj-$(CONFIG_CPU_S3C2442) += s3c2442.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o +obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o + +obj-$(CONFIG_CPU_S3C2443) += s3c2443.o irq-s3c2443.o clock-s3c2443.o + +# common code + +obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o +obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o + +# +# machine support +# following is ordered alphabetically by option text. +# + +obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o +obj-$(CONFIG_ARCH_BAST) += mach-bast.o +obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o +obj-$(CONFIG_ARCH_H1940) += mach-h1940.o +obj-$(CONFIG_H1940BT) += h1940-bluetooth.o +obj-$(CONFIG_PM_H1940) += pm-h1940.o +obj-$(CONFIG_MACH_N30) += mach-n30.o +obj-$(CONFIG_MACH_OTOM) += mach-otom.o +obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o +obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o +obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o +obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o + +obj-$(CONFIG_MACH_JIVE) += mach-jive.o +obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o +obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o + +obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o + +obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o +obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o +obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o +obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o +obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o +obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o +obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o + +obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o +obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o + +obj-$(CONFIG_MACH_SMDK2443) += mach-smdk2443.o + +# common bits of machine support + +obj-$(CONFIG_S3C24XX_SMDK) += common-smdk.o +obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO) += simtec-audio.o +obj-$(CONFIG_S3C24XX_SIMTEC_NOR) += simtec-nor.o +obj-$(CONFIG_S3C24XX_SIMTEC_PM) += simtec-pm.o +obj-$(CONFIG_S3C24XX_SIMTEC_USB) += simtec-usb.o + +# machine additions + +obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o +obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o + +# device setup + +obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o +obj-$(CONFIG_ARCH_S3C24XX) += setup-i2c.o +obj-$(CONFIG_S3C24XX_SETUP_TS) += setup-ts.o diff --git a/arch/arm/mach-s3c2410/Makefile.boot b/arch/arm/mach-s3c24xx/Makefile.boot index 4457605ba04a..4457605ba04a 100644 --- a/arch/arm/mach-s3c2410/Makefile.boot +++ b/arch/arm/mach-s3c24xx/Makefile.boot diff --git a/arch/arm/mach-s3c2410/bast-ide.c b/arch/arm/mach-s3c24xx/bast-ide.c index 298ececfa366..298ececfa366 100644 --- a/arch/arm/mach-s3c2410/bast-ide.c +++ b/arch/arm/mach-s3c24xx/bast-ide.c diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c24xx/bast-irq.c index ac7b2ad5c405..ac7b2ad5c405 100644 --- a/arch/arm/mach-s3c2410/bast-irq.c +++ b/arch/arm/mach-s3c24xx/bast-irq.c diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c index d10b695a9066..d10b695a9066 100644 --- a/arch/arm/mach-s3c2412/clock.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2412.c diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c index 59f54d1d7f8b..dbc9ab4aaca2 100644 --- a/arch/arm/mach-s3c2416/clock.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c @@ -15,7 +15,6 @@ #include <linux/clk.h> #include <plat/s3c2416.h> -#include <plat/s3c2443.h> #include <plat/clock.h> #include <plat/clock-clksrc.h> #include <plat/cpu.h> @@ -132,12 +131,6 @@ static struct clk hsmmc0_clk = { .ctrlbit = S3C2416_HCLKCON_HSMMC0, }; -void __init_or_cpufreq s3c2416_setup_clocks(void) -{ - s3c2443_common_setup_clocks(s3c2416_get_pll); -} - - static struct clksrc_clk *clksrcs[] __initdata = { &hsspi_eplldiv, &hsspi_mux, diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c index 414364eb426c..414364eb426c 100644 --- a/arch/arm/mach-s3c2440/clock.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c index 6dde2696f8f0..efb3ac359566 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c @@ -179,11 +179,6 @@ static struct clk *clks[] __initdata = { &clk_hsmmc, }; -void __init_or_cpufreq s3c2443_setup_clocks(void) -{ - s3c2443_common_setup_clocks(s3c2443_get_mpll); -} - void __init s3c2443_init_clocks(int xtal) { unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); @@ -196,8 +191,6 @@ void __init s3c2443_init_clocks(int xtal) armdiv, ARRAY_SIZE(armdiv), S3C2443_CLKDIV0_ARMDIV_MASK); - s3c2443_setup_clocks(); - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) diff --git a/arch/arm/mach-s3c2440/s3c244x-clock.c b/arch/arm/mach-s3c24xx/clock-s3c244x.c index 6d9b688c442b..6d9b688c442b 100644 --- a/arch/arm/mach-s3c2440/s3c244x-clock.c +++ b/arch/arm/mach-s3c24xx/clock-s3c244x.c diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/mach-s3c24xx/common-s3c2443.c index 95e68190d593..460431589f39 100644 --- a/arch/arm/plat-s3c24xx/s3c2443-clock.c +++ b/arch/arm/mach-s3c24xx/common-s3c2443.c @@ -1,9 +1,18 @@ -/* linux/arch/arm/plat-s3c24xx/s3c2443-clock.c +/* + * Common code for SoCs starting with the S3C2443 * * Copyright (c) 2007, 2010 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * S3C2443 Clock control suport - common code + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. */ #include <linux/init.h> @@ -12,7 +21,6 @@ #include <mach/regs-s3c2443-clock.h> -#include <plat/s3c2443.h> #include <plat/clock.h> #include <plat/clock-clksrc.h> #include <plat/cpu.h> @@ -53,7 +61,7 @@ int s3c2443_clkcon_enable_s(struct clk *clk, int enable) * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as * such directly equating the two source clocks is impossible. */ -struct clk clk_mpllref = { +static struct clk clk_mpllref = { .name = "mpllref", .parent = &clk_xtal, }; @@ -160,6 +168,44 @@ static struct clk clk_prediv = { }, }; +/* hclk divider + * + * divides the prediv and provides the hclk. + */ + +static unsigned long s3c2443_hclkdiv_getrate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); + + clkdiv0 &= S3C2443_CLKDIV0_HCLKDIV_MASK; + + return rate / (clkdiv0 + 1); +} + +static struct clk_ops clk_h_ops = { + .get_rate = s3c2443_hclkdiv_getrate, +}; + +/* pclk divider + * + * divides the hclk and provides the pclk. + */ + +static unsigned long s3c2443_pclkdiv_getrate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); + + clkdiv0 = ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 1 : 0); + + return rate / (clkdiv0 + 1); +} + +static struct clk_ops clk_p_ops = { + .get_rate = s3c2443_pclkdiv_getrate, +}; + /* armdiv * * this clock is sourced from msysclk and can have a number of @@ -516,26 +562,15 @@ static struct clk hsmmc1_clk = { .ctrlbit = S3C2443_HCLKCON_HSMMC, }; -static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0) -{ - clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK; - - return clkcon0 + 1; -} - /* EPLLCON compatible enough to get on/off information */ void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll) { unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); struct clk *xtal_clk; unsigned long xtal; unsigned long pll; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; int ptr; xtal_clk = clk_get(NULL, "xtal"); @@ -544,18 +579,13 @@ void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll) pll = get_mpll(mpllcon, xtal); clk_msysclk.clk.rate = pll; - - fclk = clk_get_rate(&clk_armdiv); - hclk = s3c2443_prediv_getrate(&clk_prediv); - hclk /= s3c2443_get_hdiv(clkdiv0); - pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1); - - s3c24xx_setup_clocks(fclk, hclk, pclk); + clk_mpll.rate = pll; printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", - (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on", - print_mhz(pll), print_mhz(fclk), - print_mhz(hclk), print_mhz(pclk)); + (mpllcon & S3C2443_PLLCON_OFF) ? "off" : "on", + print_mhz(pll), print_mhz(clk_get_rate(&clk_armdiv)), + print_mhz(clk_get_rate(&clk_h)), + print_mhz(clk_get_rate(&clk_p))); for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++) s3c_set_clksrc(&clksrc_clks[ptr], true); @@ -568,7 +598,7 @@ void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll) } printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", - (epllcon & S3C2443_PLLCON_OFF) ? "off":"on", + (epllcon & S3C2443_PLLCON_OFF) ? "off" : "on", print_mhz(clk_get_rate(&clk_epll)), print_mhz(clk_get_rate(&clk_usb_bus))); } @@ -611,9 +641,13 @@ void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, nr_armdiv = nr_divs; armdivmask = divmask; - /* s3c2443 parents h and p clocks from prediv */ + /* s3c2443 parents h clock from prediv */ clk_h.parent = &clk_prediv; - clk_p.parent = &clk_prediv; + clk_h.ops = &clk_h_ops; + + /* and p clock from h clock */ + clk_p.parent = &clk_h; + clk_p.ops = &clk_p_ops; clk_usb_bus.parent = &clk_usb_bus_host.clk; clk_epll.parent = &clk_epllref.clk; diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c index 084604be6ad1..084604be6ad1 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/mach-s3c24xx/common-smdk.c diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c index 4803338cf56e..4803338cf56e 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2410.c diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c index 38472ac920ff..38472ac920ff 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2412.c diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c index 5f0a0c8ef84f..5f0a0c8ef84f 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2440.c diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c index 14224517e621..e227c472a40a 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c @@ -51,7 +51,7 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = { .name = "xdreq1", .channels = MAP(S3C2443_DMAREQSEL_XDREQ1), }, - [DMACH_SDI] = { + [DMACH_SDI] = { /* only on S3C2443 */ .name = "sdi", .channels = MAP(S3C2443_DMAREQSEL_SDI), }, @@ -59,7 +59,7 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = { .name = "spi0", .channels = MAP(S3C2443_DMAREQSEL_SPI0TX), }, - [DMACH_SPI1] = { + [DMACH_SPI1] = { /* only on S3C2443/S3C2450 */ .name = "spi1", .channels = MAP(S3C2443_DMAREQSEL_SPI1TX), }, @@ -71,11 +71,11 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = { .name = "uart1", .channels = MAP(S3C2443_DMAREQSEL_UART1_0), }, - [DMACH_UART2] = { + [DMACH_UART2] = { .name = "uart2", .channels = MAP(S3C2443_DMAREQSEL_UART2_0), }, - [DMACH_UART3] = { + [DMACH_UART3] = { .name = "uart3", .channels = MAP(S3C2443_DMAREQSEL_UART3_0), }, @@ -87,11 +87,11 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = { .name = "uart1", .channels = MAP(S3C2443_DMAREQSEL_UART1_1), }, - [DMACH_UART2_SRC2] = { + [DMACH_UART2_SRC2] = { .name = "uart2", .channels = MAP(S3C2443_DMAREQSEL_UART2_1), }, - [DMACH_UART3_SRC2] = { + [DMACH_UART3_SRC2] = { .name = "uart3", .channels = MAP(S3C2443_DMAREQSEL_UART3_1), }, @@ -142,6 +142,23 @@ static int __init s3c2443_dma_add(struct device *dev, return s3c24xx_dma_init_map(&s3c2443_dma_sel); } +#ifdef CONFIG_CPU_S3C2416 +/* S3C2416 DMA contains the same selection table as the S3C2443 */ +static struct subsys_interface s3c2416_dma_interface = { + .name = "s3c2416_dma", + .subsys = &s3c2416_subsys, + .add_dev = s3c2443_dma_add, +}; + +static int __init s3c2416_dma_init(void) +{ + return subsys_interface_register(&s3c2416_dma_interface); +} + +arch_initcall(s3c2416_dma_init); +#endif + +#ifdef CONFIG_CPU_S3C2443 static struct subsys_interface s3c2443_dma_interface = { .name = "s3c2443_dma", .subsys = &s3c2443_subsys, @@ -154,3 +171,4 @@ static int __init s3c2443_dma_init(void) } arch_initcall(s3c2443_dma_init); +#endif diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c24xx/h1940-bluetooth.c index a5eeb62ce1c2..a5eeb62ce1c2 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c24xx/h1940-bluetooth.c diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h b/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h index 1b614d5a81f3..1b614d5a81f3 100644 --- a/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h +++ b/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-irq.h b/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h index a2a328134e34..a2a328134e34 100644 --- a/arch/arm/mach-s3c2410/include/mach/anubis-irq.h +++ b/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-map.h b/arch/arm/mach-s3c24xx/include/mach/anubis-map.h index c9deb3a5b2c3..c9deb3a5b2c3 100644 --- a/arch/arm/mach-s3c2410/include/mach/anubis-map.h +++ b/arch/arm/mach-s3c24xx/include/mach/anubis-map.h diff --git a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h b/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h index bee2a7a932a0..bee2a7a932a0 100644 --- a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h +++ b/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h diff --git a/arch/arm/mach-s3c2410/include/mach/bast-irq.h b/arch/arm/mach-s3c24xx/include/mach/bast-irq.h index cac428c42e7f..cac428c42e7f 100644 --- a/arch/arm/mach-s3c2410/include/mach/bast-irq.h +++ b/arch/arm/mach-s3c24xx/include/mach/bast-irq.h diff --git a/arch/arm/mach-s3c2410/include/mach/bast-map.h b/arch/arm/mach-s3c24xx/include/mach/bast-map.h index 6e7dc9d0cf0e..6e7dc9d0cf0e 100644 --- a/arch/arm/mach-s3c2410/include/mach/bast-map.h +++ b/arch/arm/mach-s3c24xx/include/mach/bast-map.h diff --git a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h b/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h index 4c38b39b741d..4c38b39b741d 100644 --- a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h +++ b/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S index 4135de87d1f7..4135de87d1f7 100644 --- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index acbdfecd4186..acbdfecd4186 100644 --- a/arch/arm/mach-s3c2410/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h diff --git a/arch/arm/mach-s3c2410/include/mach/entry-macro.S b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S index 7615a14773fa..7615a14773fa 100644 --- a/arch/arm/mach-s3c2410/include/mach/entry-macro.S +++ b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S diff --git a/arch/arm/mach-s3c2410/include/mach/fb.h b/arch/arm/mach-s3c24xx/include/mach/fb.h index a957bc8ed44f..a957bc8ed44f 100644 --- a/arch/arm/mach-s3c2410/include/mach/fb.h +++ b/arch/arm/mach-s3c24xx/include/mach/fb.h diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h index c53ad34c6579..c53ad34c6579 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h +++ b/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h index 019ea86057f6..019ea86057f6 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h +++ b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-track.h b/arch/arm/mach-s3c24xx/include/mach/gpio-track.h index c410a078622c..c410a078622c 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-track.h +++ b/arch/arm/mach-s3c24xx/include/mach/gpio-track.h diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c24xx/include/mach/gpio.h index 6fac70f3484e..6fac70f3484e 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/gpio.h diff --git a/arch/arm/mach-s3c2440/include/mach/gta02.h b/arch/arm/mach-s3c24xx/include/mach/gta02.h index 3a56a229cac6..3a56a229cac6 100644 --- a/arch/arm/mach-s3c2440/include/mach/gta02.h +++ b/arch/arm/mach-s3c24xx/include/mach/gta02.h diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c24xx/include/mach/h1940-latch.h index fc897d3a056c..fc897d3a056c 100644 --- a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h +++ b/arch/arm/mach-s3c24xx/include/mach/h1940-latch.h diff --git a/arch/arm/mach-s3c2410/include/mach/h1940.h b/arch/arm/mach-s3c24xx/include/mach/h1940.h index 2aa683c8d3d6..2aa683c8d3d6 100644 --- a/arch/arm/mach-s3c2410/include/mach/h1940.h +++ b/arch/arm/mach-s3c24xx/include/mach/h1940.h diff --git a/arch/arm/mach-s3c2410/include/mach/hardware.h b/arch/arm/mach-s3c24xx/include/mach/hardware.h index aef5631eac58..aef5631eac58 100644 --- a/arch/arm/mach-s3c2410/include/mach/hardware.h +++ b/arch/arm/mach-s3c24xx/include/mach/hardware.h diff --git a/arch/arm/mach-s3c2410/include/mach/idle.h b/arch/arm/mach-s3c24xx/include/mach/idle.h index e9ddd706b16e..e9ddd706b16e 100644 --- a/arch/arm/mach-s3c2410/include/mach/idle.h +++ b/arch/arm/mach-s3c24xx/include/mach/idle.h diff --git a/arch/arm/mach-s3c2410/include/mach/io.h b/arch/arm/mach-s3c24xx/include/mach/io.h index 118749f37c4c..118749f37c4c 100644 --- a/arch/arm/mach-s3c2410/include/mach/io.h +++ b/arch/arm/mach-s3c24xx/include/mach/io.h diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c24xx/include/mach/irqs.h index e53b2177319e..e53b2177319e 100644 --- a/arch/arm/mach-s3c2410/include/mach/irqs.h +++ b/arch/arm/mach-s3c24xx/include/mach/irqs.h diff --git a/arch/arm/mach-s3c2410/include/mach/leds-gpio.h b/arch/arm/mach-s3c24xx/include/mach/leds-gpio.h index d8a7672519b6..d8a7672519b6 100644 --- a/arch/arm/mach-s3c2410/include/mach/leds-gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/leds-gpio.h diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c24xx/include/mach/map.h index 78ae807f1281..78ae807f1281 100644 --- a/arch/arm/mach-s3c2410/include/mach/map.h +++ b/arch/arm/mach-s3c24xx/include/mach/map.h diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h b/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h index e9e36b0abbac..e9e36b0abbac 100644 --- a/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h +++ b/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-map.h b/arch/arm/mach-s3c24xx/include/mach/osiris-map.h index 17380f848428..17380f848428 100644 --- a/arch/arm/mach-s3c2410/include/mach/osiris-map.h +++ b/arch/arm/mach-s3c24xx/include/mach/osiris-map.h diff --git a/arch/arm/mach-s3c2410/include/mach/otom-map.h b/arch/arm/mach-s3c24xx/include/mach/otom-map.h index f9277a52c145..f9277a52c145 100644 --- a/arch/arm/mach-s3c2410/include/mach/otom-map.h +++ b/arch/arm/mach-s3c24xx/include/mach/otom-map.h diff --git a/arch/arm/mach-s3c2410/include/mach/pm-core.h b/arch/arm/mach-s3c24xx/include/mach/pm-core.h index 2eef7e6f7675..2eef7e6f7675 100644 --- a/arch/arm/mach-s3c2410/include/mach/pm-core.h +++ b/arch/arm/mach-s3c24xx/include/mach/pm-core.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h index 3415b60082d7..3415b60082d7 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h b/arch/arm/mach-s3c24xx/include/mach/regs-dsc.h index 98fd4a05587c..98fd4a05587c 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-dsc.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h index cac1ad6b582c..cac1ad6b582c 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h index 19575e061114..19575e061114 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-irq.h b/arch/arm/mach-s3c24xx/include/mach/regs-irq.h index 0f07ba30b1fb..0f07ba30b1fb 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-irq.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-irq.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-lcd.h b/arch/arm/mach-s3c24xx/include/mach/regs-lcd.h index ee8f040aff5f..ee8f040aff5f 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-lcd.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-lcd.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-mem.h index e0c67b0163d8..e0c67b0163d8 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-mem.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-power.h b/arch/arm/mach-s3c24xx/include/mach/regs-power.h index 4932b87bdf3d..4932b87bdf3d 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-power.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-power.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h index fb6352515090..fb6352515090 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h index aa69dc79bc38..aa69dc79bc38 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h index 2f31b74974af..2f31b74974af 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h index e443167efb87..e443167efb87 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h index c3feff3c0488..c3feff3c0488 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-sdi.h b/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h index cbf2d8884e30..cbf2d8884e30 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-sdi.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h diff --git a/arch/arm/mach-s3c2410/include/mach/tick.h b/arch/arm/mach-s3c24xx/include/mach/tick.h index 544da41979db..544da41979db 100644 --- a/arch/arm/mach-s3c2410/include/mach/tick.h +++ b/arch/arm/mach-s3c24xx/include/mach/tick.h diff --git a/arch/arm/mach-s3c2410/include/mach/timex.h b/arch/arm/mach-s3c24xx/include/mach/timex.h index fe9ca1ffd51b..fe9ca1ffd51b 100644 --- a/arch/arm/mach-s3c2410/include/mach/timex.h +++ b/arch/arm/mach-s3c24xx/include/mach/timex.h diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c24xx/include/mach/uncompress.h index 8b283f847daa..8b283f847daa 100644 --- a/arch/arm/mach-s3c2410/include/mach/uncompress.h +++ b/arch/arm/mach-s3c24xx/include/mach/uncompress.h diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h index e4119913d7c5..e4119913d7c5 100644 --- a/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h +++ b/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h index 47add133b8ee..47add133b8ee 100644 --- a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h +++ b/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-map.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h index 99612fcc4eb2..99612fcc4eb2 100644 --- a/arch/arm/mach-s3c2410/include/mach/vr1000-map.h +++ b/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c24xx/irq-s3c2412.c index e65619ddbccc..e65619ddbccc 100644 --- a/arch/arm/mach-s3c2412/irq.c +++ b/arch/arm/mach-s3c24xx/irq-s3c2412.c diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c24xx/irq-s3c2416.c index fd49f35e448e..fd49f35e448e 100644 --- a/arch/arm/mach-s3c2416/irq.c +++ b/arch/arm/mach-s3c24xx/irq-s3c2416.c diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c24xx/irq-s3c2440.c index 4a18cde439cc..4a18cde439cc 100644 --- a/arch/arm/mach-s3c2440/irq.c +++ b/arch/arm/mach-s3c24xx/irq-s3c2440.c diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c24xx/irq-s3c2443.c index ac2829f56d12..ac2829f56d12 100644 --- a/arch/arm/mach-s3c2443/irq.c +++ b/arch/arm/mach-s3c24xx/irq-s3c2443.c diff --git a/arch/arm/mach-s3c2440/s3c244x-irq.c b/arch/arm/mach-s3c24xx/irq-s3c244x.c index 5fe8e58d3afd..5fe8e58d3afd 100644 --- a/arch/arm/mach-s3c2440/s3c244x-irq.c +++ b/arch/arm/mach-s3c24xx/irq-s3c244x.c diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index 4220cc60de3c..4220cc60de3c 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index 19b577bc09b8..60c72c54c21e 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -55,6 +55,7 @@ #include <plat/cpu.h> #include <plat/audio-simtec.h> +#include "simtec.h" #include "common.h" #define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics" diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index d7ae49c90118..d7ae49c90118 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index feeaf73933dc..53219c02eca0 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -64,8 +64,7 @@ #include <plat/gpio-cfg.h> #include <plat/audio-simtec.h> -#include "usb-simtec.h" -#include "nor-simtec.h" +#include "simtec.h" #include "common.h" #define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics" diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index 9a4a5bc008e6..ba5d85394105 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -38,6 +38,7 @@ #include <linux/platform_device.h> #include <linux/serial_core.h> #include <linux/spi/spi.h> +#include <linux/spi/s3c24xx.h> #include <linux/mmc/host.h> @@ -73,7 +74,6 @@ #include <mach/regs-gpioj.h> #include <mach/fb.h> -#include <mach/spi.h> #include <plat/usb-control.h> #include <mach/regs-mem.h> #include <mach/hardware.h> @@ -258,7 +258,7 @@ static struct pcf50633_bl_platform_data gta02_backlight_data = { .ramp_time = 5, }; -struct pcf50633_platform_data gta02_pcf_pdata = { +static struct pcf50633_platform_data gta02_pcf_pdata = { .resumers = { [0] = PCF50633_INT1_USBINS | PCF50633_INT1_USBREM | @@ -404,7 +404,7 @@ static struct platform_device gta02_nor_flash = { }; -struct platform_device s3c24xx_pwm_device = { +static struct platform_device s3c24xx_pwm_device = { .name = "s3c24xx_pwm", .num_resources = 0, }; diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index 41245a603981..6b21ba107eab 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -162,7 +162,7 @@ static int h1940_gpiolib_latch_get(struct gpio_chip *chip, return (latch_state >> (offset + 16)) & 1; } -struct gpio_chip h1940_latch_gpiochip = { +static struct gpio_chip h1940_latch_gpiochip = { .base = H1940_LATCH_GPIO(0), .owner = THIS_MODULE, .label = "H1940_LATCH", @@ -304,7 +304,7 @@ static const struct s3c_adc_bat_thresh bat_lut_acin[] = { { .volt = 3841, .cur = 0, .level = 0}, }; -int h1940_bat_init(void) +static int h1940_bat_init(void) { int ret; @@ -317,17 +317,17 @@ int h1940_bat_init(void) } -void h1940_bat_exit(void) +static void h1940_bat_exit(void) { gpio_free(H1940_LATCH_SM803_ENABLE); } -void h1940_enable_charger(void) +static void h1940_enable_charger(void) { gpio_set_value(H1940_LATCH_SM803_ENABLE, 1); } -void h1940_disable_charger(void) +static void h1940_disable_charger(void) { gpio_set_value(H1940_LATCH_SM803_ENABLE, 0); } @@ -364,7 +364,7 @@ static struct platform_device h1940_battery = { }, }; -DEFINE_SPINLOCK(h1940_blink_spin); +static DEFINE_SPINLOCK(h1940_blink_spin); int h1940_led_blink_set(unsigned gpio, int state, unsigned long *delay_on, unsigned long *delay_off) diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index ae73ba34ecc6..ae73ba34ecc6 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 5d66fb218a41..5d66fb218a41 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 383d00ca8f60..383d00ca8f60 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index 5198e3e1c5be..5198e3e1c5be 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c diff --git a/arch/arm/mach-s3c2440/mach-osiris-dvs.c b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c index ad2792dfbee1..ad2792dfbee1 100644 --- a/arch/arm/mach-s3c2440/mach-osiris-dvs.c +++ b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index c5daeb612a88..c5daeb612a88 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index 5f1e0eeb38a9..5f1e0eeb38a9 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 91c16d9d2459..91c16d9d2459 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index 6f68abf44fab..200debb4c72d 100644 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -217,7 +217,7 @@ static const struct s3c_adc_bat_thresh bat_lut_acin[] = { { .volt = 3820, .cur = 0, .level = 0}, }; -int rx1950_bat_init(void) +static int rx1950_bat_init(void) { int ret; @@ -236,25 +236,25 @@ err_gpio1: return ret; } -void rx1950_bat_exit(void) +static void rx1950_bat_exit(void) { gpio_free(S3C2410_GPJ(2)); gpio_free(S3C2410_GPJ(3)); } -void rx1950_enable_charger(void) +static void rx1950_enable_charger(void) { gpio_direction_output(S3C2410_GPJ(2), 1); gpio_direction_output(S3C2410_GPJ(3), 1); } -void rx1950_disable_charger(void) +static void rx1950_disable_charger(void) { gpio_direction_output(S3C2410_GPJ(2), 0); gpio_direction_output(S3C2410_GPJ(3), 0); } -DEFINE_SPINLOCK(rx1950_blink_spin); +static DEFINE_SPINLOCK(rx1950_blink_spin); static int rx1950_led_blink_set(unsigned gpio, int state, unsigned long *delay_on, unsigned long *delay_off) @@ -382,7 +382,7 @@ static struct s3c2410fb_mach_info rx1950_lcd_cfg = { static struct pwm_device *lcd_pwm; -void rx1950_lcd_power(int enable) +static void rx1950_lcd_power(int enable) { int i; static int enabled; diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index 56af35447598..56af35447598 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index bdc27e772876..bdc27e772876 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index b11451b853d8..b11451b853d8 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index eebe1e72b93e..30a44f806e01 100644 --- a/arch/arm/mach-s3c2416/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -125,7 +125,7 @@ static struct s3c2410_uartcfg smdk2416_uartcfgs[] __initdata = { } }; -void smdk2416_hsudc_gpio_init(void) +static void smdk2416_hsudc_gpio_init(void) { s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_UP); s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_NONE); @@ -133,20 +133,20 @@ void smdk2416_hsudc_gpio_init(void) s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 0); } -void smdk2416_hsudc_gpio_uninit(void) +static void smdk2416_hsudc_gpio_uninit(void) { s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 1); s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_NONE); s3c_gpio_cfgpin(S3C2410_GPH(14), S3C_GPIO_SFN(0)); } -struct s3c24xx_hsudc_platdata smdk2416_hsudc_platdata = { +static struct s3c24xx_hsudc_platdata smdk2416_hsudc_platdata = { .epnum = 9, .gpio_init = smdk2416_hsudc_gpio_init, .gpio_uninit = smdk2416_hsudc_gpio_uninit, }; -struct s3c_fb_pd_win smdk2416_fb_win[] = { +static struct s3c_fb_pd_win smdk2416_fb_win[] = { [0] = { /* think this is the same as the smdk6410 */ .win_mode = { diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index 83a1036d7dcb..83a1036d7dcb 100644 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index 209236956222..209236956222 100644 --- a/arch/arm/mach-s3c2443/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 1114666f0efb..1114666f0efb 100644 --- a/arch/arm/mach-s3c2410/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index dbe668a803ef..87608d45dac4 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -51,8 +51,7 @@ #include <plat/iic.h> #include <plat/audio-simtec.h> -#include "usb-simtec.h" -#include "nor-simtec.h" +#include "simtec.h" #include "common.h" /* macros for virtual address mods for the io space entries */ diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index 94bfaa1fb148..94bfaa1fb148 100644 --- a/arch/arm/mach-s3c2412/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c diff --git a/arch/arm/mach-s3c2410/pm-h1940.S b/arch/arm/mach-s3c24xx/pm-h1940.S index c93bf2db9f4d..c93bf2db9f4d 100644 --- a/arch/arm/mach-s3c2410/pm-h1940.S +++ b/arch/arm/mach-s3c24xx/pm-h1940.S diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c24xx/pm-s3c2410.c index 03f706dd6009..03f706dd6009 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2410.c diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c index d04588506ec4..d04588506ec4 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c24xx/pm-s3c2416.c index 1bd4817b8eb8..1bd4817b8eb8 100644 --- a/arch/arm/mach-s3c2416/pm.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2416.c diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c index 061b6bb1a557..061b6bb1a557 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c24xx/s3c2410.c diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index c6eac9871093..c6eac9871093 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index 08bb0355159d..08bb0355159d 100644 --- a/arch/arm/mach-s3c2416/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c24xx/s3c2440.c index 2b3dddb49af7..2b3dddb49af7 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c24xx/s3c2440.c diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c index 22cb7c94a8c8..22cb7c94a8c8 100644 --- a/arch/arm/mach-s3c2440/s3c2442.c +++ b/arch/arm/mach-s3c24xx/s3c2442.c diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c index b9deaeb0dfff..b9deaeb0dfff 100644 --- a/arch/arm/mach-s3c2443/s3c2443.c +++ b/arch/arm/mach-s3c24xx/s3c2443.c diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index d15852f642b7..d15852f642b7 100644 --- a/arch/arm/mach-s3c2440/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/mach-s3c24xx/setup-i2c.c index 9e90a7cbd1d6..9e90a7cbd1d6 100644 --- a/arch/arm/plat-s3c24xx/setup-i2c.c +++ b/arch/arm/mach-s3c24xx/setup-i2c.c diff --git a/arch/arm/mach-s3c2416/setup-sdhci-gpio.c b/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c index f65cb3ef16ce..f65cb3ef16ce 100644 --- a/arch/arm/mach-s3c2416/setup-sdhci-gpio.c +++ b/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c diff --git a/arch/arm/plat-s3c24xx/setup-ts.c b/arch/arm/mach-s3c24xx/setup-ts.c index ed2638663675..ed2638663675 100644 --- a/arch/arm/plat-s3c24xx/setup-ts.c +++ b/arch/arm/mach-s3c24xx/setup-ts.c diff --git a/arch/arm/plat-s3c24xx/simtec-audio.c b/arch/arm/mach-s3c24xx/simtec-audio.c index 6bc832e0d8ea..11881c9a38c0 100644 --- a/arch/arm/plat-s3c24xx/simtec-audio.c +++ b/arch/arm/mach-s3c24xx/simtec-audio.c @@ -27,6 +27,8 @@ #include <plat/audio-simtec.h> #include <plat/devs.h> +#include "simtec.h" + /* platform ops for audio */ static void simtec_audio_startup_lrroute(void) diff --git a/arch/arm/mach-s3c2410/nor-simtec.c b/arch/arm/mach-s3c24xx/simtec-nor.c index ad9f750f1e55..2119ca6a73bc 100644 --- a/arch/arm/mach-s3c2410/nor-simtec.c +++ b/arch/arm/mach-s3c24xx/simtec-nor.c @@ -30,7 +30,7 @@ #include <mach/bast-map.h> #include <mach/bast-cpld.h> -#include "nor-simtec.h" +#include "simtec.h" static void simtec_nor_vpp(struct platform_device *pdev, int vpp) { diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/mach-s3c24xx/simtec-pm.c index 699f93171297..699f93171297 100644 --- a/arch/arm/plat-s3c24xx/pm-simtec.c +++ b/arch/arm/mach-s3c24xx/simtec-pm.c diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c24xx/simtec-usb.c index 29bd3d987bec..d91c1a725139 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c24xx/simtec-usb.c @@ -37,7 +37,7 @@ #include <plat/usb-control.h> #include <plat/devs.h> -#include "usb-simtec.h" +#include "simtec.h" /* control power and monitor over-current events on various Simtec * designed boards. diff --git a/arch/arm/mach-s3c2410/nor-simtec.h b/arch/arm/mach-s3c24xx/simtec.h index f619c1e0d0c8..ae8f4f9ad2ee 100644 --- a/arch/arm/mach-s3c2410/nor-simtec.h +++ b/arch/arm/mach-s3c24xx/simtec.h @@ -4,11 +4,18 @@ * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * - * Simtec NOR mapping + * Simtec common functions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +struct s3c24xx_audio_simtec_pdata; + extern void nor_simtec_init(void); + +extern int usb_simtec_init(void); + +extern int simtec_audio_add(const char *codec_name, bool has_lr_routing, + struct s3c24xx_audio_simtec_pdata *pdata); diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c24xx/sleep-s3c2410.S index dd5b6388a5a5..dd5b6388a5a5 100644 --- a/arch/arm/mach-s3c2410/sleep.S +++ b/arch/arm/mach-s3c24xx/sleep-s3c2410.S diff --git a/arch/arm/mach-s3c2412/sleep.S b/arch/arm/mach-s3c24xx/sleep-s3c2412.S index c82418ed714d..c82418ed714d 100644 --- a/arch/arm/mach-s3c2412/sleep.S +++ b/arch/arm/mach-s3c24xx/sleep-s3c2412.S diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h index 5eb9c9a7d73b..7a10be629aba 100644 --- a/arch/arm/mach-s3c64xx/common.h +++ b/arch/arm/mach-s3c64xx/common.h @@ -25,8 +25,6 @@ void s3c64xx_setup_clocks(void); void s3c64xx_restart(char mode, const char *cmd); -extern struct syscore_ops s3c64xx_irq_syscore_ops; - #ifdef CONFIG_CPU_S3C6400 extern int s3c6400_init(void); diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c index 8bec61e242c7..0c7e1d960ca4 100644 --- a/arch/arm/mach-s3c64xx/irq-pm.c +++ b/arch/arm/mach-s3c64xx/irq-pm.c @@ -96,7 +96,7 @@ static void s3c64xx_irq_pm_resume(void) S3C_PMDBG("%s: IRQ configuration restored\n", __func__); } -struct syscore_ops s3c64xx_irq_syscore_ops = { +static struct syscore_ops s3c64xx_irq_syscore_ops = { .suspend = s3c64xx_irq_pm_suspend, .resume = s3c64xx_irq_pm_resume, }; diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c index 241d0e645c85..57e718957ef3 100644 --- a/arch/arm/mach-s5p64x0/clock.c +++ b/arch/arm/mach-s5p64x0/clock.c @@ -73,7 +73,7 @@ static const u32 clock_table[][3] = { {L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)}, }; -unsigned long s5p64x0_armclk_get_rate(struct clk *clk) +static unsigned long s5p64x0_armclk_get_rate(struct clk *clk) { unsigned long rate = clk_get_rate(clk->parent); u32 clkdiv; @@ -84,7 +84,8 @@ unsigned long s5p64x0_armclk_get_rate(struct clk *clk) return rate / (clkdiv + 1); } -unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate) +static unsigned long s5p64x0_armclk_round_rate(struct clk *clk, + unsigned long rate) { u32 iter; @@ -96,7 +97,7 @@ unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate) return clock_table[ARRAY_SIZE(clock_table) - 1][0]; } -int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate) +static int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate) { u32 round_tmp; u32 iter; @@ -148,7 +149,7 @@ int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate) return 0; } -struct clk_ops s5p64x0_clkarm_ops = { +static struct clk_ops s5p64x0_clkarm_ops = { .get_rate = s5p64x0_armclk_get_rate, .set_rate = s5p64x0_armclk_set_rate, .round_rate = s5p64x0_armclk_round_rate, @@ -173,7 +174,7 @@ struct clksrc_clk clk_dout_mpll = { .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 4, .size = 1 }, }; -struct clk *clkset_hclk_low_list[] = { +static struct clk *clkset_hclk_low_list[] = { &clk_mout_apll.clk, &clk_mout_mpll.clk, }; diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c index f7f68ad77910..2ee5dc069b37 100644 --- a/arch/arm/mach-s5p64x0/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -38,7 +38,7 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -u8 s5p6440_pdma_peri[] = { +static u8 s5p6440_pdma_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, DMACH_UART1_RX, @@ -63,12 +63,12 @@ u8 s5p6440_pdma_peri[] = { DMACH_SPI1_RX, }; -struct dma_pl330_platdata s5p6440_pdma_pdata = { +static struct dma_pl330_platdata s5p6440_pdma_pdata = { .nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri), .peri_id = s5p6440_pdma_peri, }; -u8 s5p6450_pdma_peri[] = { +static u8 s5p6450_pdma_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, DMACH_UART1_RX, @@ -103,13 +103,13 @@ u8 s5p6450_pdma_peri[] = { DMACH_UART5_TX, }; -struct dma_pl330_platdata s5p6450_pdma_pdata = { +static struct dma_pl330_platdata s5p6450_pdma_pdata = { .nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri), .peri_id = s5p6450_pdma_peri, }; -AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330, S5P64X0_PA_PDMA, - {IRQ_DMA0}, NULL); +static AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330, + S5P64X0_PA_PDMA, {IRQ_DMA0}, NULL); static int __init s5p64x0_dma_init(void) { diff --git a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h index ff85b4b6e8d9..0ef47d1b7670 100644 --- a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h +++ b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h @@ -22,16 +22,9 @@ extern struct clksrc_clk clk_mout_epll; extern int s5p64x0_epll_enable(struct clk *clk, int enable); extern unsigned long s5p64x0_epll_get_rate(struct clk *clk); -extern unsigned long s5p64x0_armclk_get_rate(struct clk *clk); -extern unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate); -extern int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate); - -extern struct clk_ops s5p64x0_clkarm_ops; - extern struct clksrc_clk clk_armclk; extern struct clksrc_clk clk_dout_mpll; -extern struct clk *clkset_hclk_low_list[]; extern struct clksrc_sources clkset_hclk_low; extern int s5p64x0_pclk_ctrl(struct clk *clk, int enable); diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c index 247194dd366c..16eca4ea2010 100644 --- a/arch/arm/mach-s5pc100/clock.c +++ b/arch/arm/mach-s5pc100/clock.c @@ -170,7 +170,7 @@ static struct clk *clk_src_mout_am_list[] = { [1] = &clk_div_apll2.clk, }; -struct clksrc_sources clk_src_mout_am = { +static struct clksrc_sources clk_src_mout_am = { .sources = clk_src_mout_am_list, .nr_sources = ARRAY_SIZE(clk_src_mout_am_list), }; @@ -212,7 +212,7 @@ static struct clk *clk_src_mout_onenand_list[] = { [1] = &clk_div_d1_bus.clk, }; -struct clksrc_sources clk_src_mout_onenand = { +static struct clksrc_sources clk_src_mout_onenand = { .sources = clk_src_mout_onenand_list, .nr_sources = ARRAY_SIZE(clk_src_mout_onenand_list), }; @@ -756,7 +756,7 @@ static struct clk *clk_src_group1_list[] = { [3] = &clk_mout_hpll.clk, }; -struct clksrc_sources clk_src_group1 = { +static struct clksrc_sources clk_src_group1 = { .sources = clk_src_group1_list, .nr_sources = ARRAY_SIZE(clk_src_group1_list), }; @@ -766,7 +766,7 @@ static struct clk *clk_src_group2_list[] = { [1] = &clk_div_mpll.clk, }; -struct clksrc_sources clk_src_group2 = { +static struct clksrc_sources clk_src_group2 = { .sources = clk_src_group2_list, .nr_sources = ARRAY_SIZE(clk_src_group2_list), }; @@ -780,7 +780,7 @@ static struct clk *clk_src_group3_list[] = { [5] = &clk_mout_hpll.clk, }; -struct clksrc_sources clk_src_group3 = { +static struct clksrc_sources clk_src_group3 = { .sources = clk_src_group3_list, .nr_sources = ARRAY_SIZE(clk_src_group3_list), }; @@ -806,7 +806,7 @@ static struct clk *clk_src_group4_list[] = { [5] = &clk_mout_hpll.clk, }; -struct clksrc_sources clk_src_group4 = { +static struct clksrc_sources clk_src_group4 = { .sources = clk_src_group4_list, .nr_sources = ARRAY_SIZE(clk_src_group4_list), }; @@ -831,7 +831,7 @@ static struct clk *clk_src_group5_list[] = { [4] = &clk_mout_hpll.clk, }; -struct clksrc_sources clk_src_group5 = { +static struct clksrc_sources clk_src_group5 = { .sources = clk_src_group5_list, .nr_sources = ARRAY_SIZE(clk_src_group5_list), }; @@ -854,7 +854,7 @@ static struct clk *clk_src_group6_list[] = { [2] = &clk_div_hdmi.clk, }; -struct clksrc_sources clk_src_group6 = { +static struct clksrc_sources clk_src_group6 = { .sources = clk_src_group6_list, .nr_sources = ARRAY_SIZE(clk_src_group6_list), }; @@ -866,7 +866,7 @@ static struct clk *clk_src_group7_list[] = { [3] = &clk_vclk54m, }; -struct clksrc_sources clk_src_group7 = { +static struct clksrc_sources clk_src_group7 = { .sources = clk_src_group7_list, .nr_sources = ARRAY_SIZE(clk_src_group7_list), }; @@ -877,7 +877,7 @@ static struct clk *clk_src_mmc0_list[] = { [2] = &clk_fin_epll, }; -struct clksrc_sources clk_src_mmc0 = { +static struct clksrc_sources clk_src_mmc0 = { .sources = clk_src_mmc0_list, .nr_sources = ARRAY_SIZE(clk_src_mmc0_list), }; @@ -889,7 +889,7 @@ static struct clk *clk_src_mmc12_list[] = { [3] = &clk_mout_hpll.clk, }; -struct clksrc_sources clk_src_mmc12 = { +static struct clksrc_sources clk_src_mmc12 = { .sources = clk_src_mmc12_list, .nr_sources = ARRAY_SIZE(clk_src_mmc12_list), }; @@ -901,7 +901,7 @@ static struct clk *clk_src_irda_usb_list[] = { [3] = &clk_mout_hpll.clk, }; -struct clksrc_sources clk_src_irda_usb = { +static struct clksrc_sources clk_src_irda_usb = { .sources = clk_src_irda_usb_list, .nr_sources = ARRAY_SIZE(clk_src_irda_usb_list), }; @@ -912,7 +912,7 @@ static struct clk *clk_src_pwi_list[] = { [2] = &clk_div_mpll.clk, }; -struct clksrc_sources clk_src_pwi = { +static struct clksrc_sources clk_src_pwi = { .sources = clk_src_pwi_list, .nr_sources = ARRAY_SIZE(clk_src_pwi_list), }; @@ -923,7 +923,7 @@ static struct clk *clk_sclk_spdif_list[] = { [2] = &clk_sclk_audio2.clk, }; -struct clksrc_sources clk_src_sclk_spdif = { +static struct clksrc_sources clk_src_sclk_spdif = { .sources = clk_sclk_spdif_list, .nr_sources = ARRAY_SIZE(clk_sclk_spdif_list), }; diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c index 96b1ab3dcd48..afd8db2d5991 100644 --- a/arch/arm/mach-s5pc100/dma.c +++ b/arch/arm/mach-s5pc100/dma.c @@ -35,7 +35,7 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -u8 pdma0_peri[] = { +static u8 pdma0_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, DMACH_UART1_RX, @@ -68,15 +68,15 @@ u8 pdma0_peri[] = { DMACH_HSI_TX, }; -struct dma_pl330_platdata s5pc100_pdma0_pdata = { +static struct dma_pl330_platdata s5pc100_pdma0_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma0_peri), .peri_id = pdma0_peri, }; -AMBA_AHB_DEVICE(s5pc100_pdma0, "dma-pl330.0", 0x00041330, S5PC100_PA_PDMA0, - {IRQ_PDMA0}, &s5pc100_pdma0_pdata); +static AMBA_AHB_DEVICE(s5pc100_pdma0, "dma-pl330.0", 0x00041330, + S5PC100_PA_PDMA0, {IRQ_PDMA0}, &s5pc100_pdma0_pdata); -u8 pdma1_peri[] = { +static u8 pdma1_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, DMACH_UART1_RX, @@ -109,13 +109,13 @@ u8 pdma1_peri[] = { DMACH_MSM_REQ3, }; -struct dma_pl330_platdata s5pc100_pdma1_pdata = { +static struct dma_pl330_platdata s5pc100_pdma1_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma1_peri), .peri_id = pdma1_peri, }; -AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330, S5PC100_PA_PDMA1, - {IRQ_PDMA1}, &s5pc100_pdma1_pdata); +static AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330, + S5PC100_PA_PDMA1, {IRQ_PDMA1}, &s5pc100_pdma1_pdata); static int __init s5pc100_dma_init(void) { diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c index f6885d247d14..86ce62f66190 100644 --- a/arch/arm/mach-s5pv210/dma.c +++ b/arch/arm/mach-s5pv210/dma.c @@ -35,7 +35,7 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -u8 pdma0_peri[] = { +static u8 pdma0_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, DMACH_UART1_RX, @@ -66,15 +66,15 @@ u8 pdma0_peri[] = { DMACH_SPDIF, }; -struct dma_pl330_platdata s5pv210_pdma0_pdata = { +static struct dma_pl330_platdata s5pv210_pdma0_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma0_peri), .peri_id = pdma0_peri, }; -AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330, S5PV210_PA_PDMA0, - {IRQ_PDMA0}, &s5pv210_pdma0_pdata); +static AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330, + S5PV210_PA_PDMA0, {IRQ_PDMA0}, &s5pv210_pdma0_pdata); -u8 pdma1_peri[] = { +static u8 pdma1_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, DMACH_UART1_RX, @@ -109,13 +109,13 @@ u8 pdma1_peri[] = { DMACH_PCM2_TX, }; -struct dma_pl330_platdata s5pv210_pdma1_pdata = { +static struct dma_pl330_platdata s5pv210_pdma1_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma1_peri), .peri_id = pdma1_peri, }; -AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330, S5PV210_PA_PDMA1, - {IRQ_PDMA1}, &s5pv210_pdma1_pdata); +static AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330, + S5PV210_PA_PDMA1, {IRQ_PDMA1}, &s5pv210_pdma1_pdata); static int __init s5pv210_dma_init(void) { diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index ff9152610439..2cf5ed75f390 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -844,7 +844,7 @@ static struct s5p_fimc_isp_info goni_camera_sensors[] = { }, }; -struct s5p_platform_fimc goni_fimc_md_platdata __initdata = { +static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = { .isp_info = goni_camera_sensors, .num_clients = ARRAY_SIZE(goni_camera_sensors), }; diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index dff9ea7b5bba..0933c8e1eb7b 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -140,7 +140,7 @@ static struct dm9000_plat_data smdkv210_dm9000_platdata = { .dev_addr = { 0x00, 0x09, 0xc0, 0xff, 0xec, 0x48 }, }; -struct platform_device smdkv210_dm9000 = { +static struct platform_device smdkv210_dm9000 = { .name = "dm9000", .id = -1, .num_resources = ARRAY_SIZE(smdkv210_dm9000_resources), diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 32b420a90c3d..16511199bad6 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -12,6 +12,14 @@ config ARCH_TEGRA_2x_SOC select USB_ARCH_HAS_EHCI if USB_SUPPORT select USB_ULPI if USB_SUPPORT select USB_ULPI_VIEWPORT if USB_SUPPORT + select ARM_ERRATA_720789 + select ARM_ERRATA_742230 + select ARM_ERRATA_751472 + select ARM_ERRATA_754327 + select ARM_ERRATA_764369 + select PL310_ERRATA_727915 if CACHE_L2X0 + select PL310_ERRATA_769419 if CACHE_L2X0 + select CPU_FREQ_TABLE if CPU_FREQ help Support for NVIDIA Tegra AP20 and T20 processors, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller @@ -27,6 +35,12 @@ config ARCH_TEGRA_3x_SOC select USB_ULPI if USB_SUPPORT select USB_ULPI_VIEWPORT if USB_SUPPORT select USE_OF + select ARM_ERRATA_743622 + select ARM_ERRATA_751472 + select ARM_ERRATA_754322 + select ARM_ERRATA_764369 + select PL310_ERRATA_769419 if CACHE_L2X0 + select CPU_FREQ_TABLE if CPU_FREQ help Support for NVIDIA Tegra T30 processor family, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index e120ff54f663..829066fdc2ad 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -13,7 +13,8 @@ obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += pinmux-tegra20-tables.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += pinmux-tegra30-tables.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o -obj-$(CONFIG_SMP) += platsmp.o localtimer.o headsmp.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 2db20da1d585..fac449e84d80 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -95,8 +95,6 @@ static void __init tegra_init_cache(u32 tag_latency, u32 data_latency) #ifdef CONFIG_ARCH_TEGRA_2x_SOC void __init tegra20_init_early(void) { - disable_hlt(); /* idle WFI usage needs to be confirmed */ - tegra_init_fuse(); tegra2_init_clocks(); tegra_clk_init_from_table(tegra20_clk_init_table); diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c index ad321f9e2bb8..c5b2ac04e2a0 100644 --- a/arch/arm/mach-tegra/usb_phy.c +++ b/arch/arm/mach-tegra/usb_phy.c @@ -22,6 +22,7 @@ #include <linux/delay.h> #include <linux/slab.h> #include <linux/err.h> +#include <linux/export.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/gpio.h> @@ -730,6 +731,7 @@ err0: kfree(phy); return ERR_PTR(err); } +EXPORT_SYMBOL_GPL(tegra_usb_phy_open); int tegra_usb_phy_power_on(struct tegra_usb_phy *phy) { @@ -738,6 +740,7 @@ int tegra_usb_phy_power_on(struct tegra_usb_phy *phy) else return utmi_phy_power_on(phy); } +EXPORT_SYMBOL_GPL(tegra_usb_phy_power_on); void tegra_usb_phy_power_off(struct tegra_usb_phy *phy) { @@ -746,18 +749,21 @@ void tegra_usb_phy_power_off(struct tegra_usb_phy *phy) else utmi_phy_power_off(phy); } +EXPORT_SYMBOL_GPL(tegra_usb_phy_power_off); void tegra_usb_phy_preresume(struct tegra_usb_phy *phy) { if (!phy_is_ulpi(phy)) utmi_phy_preresume(phy); } +EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume); void tegra_usb_phy_postresume(struct tegra_usb_phy *phy) { if (!phy_is_ulpi(phy)) utmi_phy_postresume(phy); } +EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume); void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy, enum tegra_usb_phy_port_speed port_speed) @@ -765,24 +771,28 @@ void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy, if (!phy_is_ulpi(phy)) utmi_phy_restore_start(phy, port_speed); } +EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start); void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy) { if (!phy_is_ulpi(phy)) utmi_phy_restore_end(phy); } +EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end); void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy) { if (!phy_is_ulpi(phy)) utmi_phy_clk_disable(phy); } +EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_disable); void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy) { if (!phy_is_ulpi(phy)) utmi_phy_clk_enable(phy); } +EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_enable); void tegra_usb_phy_close(struct tegra_usb_phy *phy) { @@ -794,3 +804,4 @@ void tegra_usb_phy_close(struct tegra_usb_phy *phy) clk_put(phy->pll_u); kfree(phy); } +EXPORT_SYMBOL_GPL(tegra_usb_phy_close); diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c index 55f15699a383..689f81f9593b 100644 --- a/arch/arm/plat-mxc/avic.c +++ b/arch/arm/plat-mxc/avic.c @@ -60,7 +60,7 @@ static int avic_irq_set_priority(unsigned char irq, unsigned char prio) unsigned int mask = 0x0F << irq % 8 * 4; if (irq >= AVIC_NUM_IRQS) - return -EINVAL;; + return -EINVAL; temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8)); temp &= ~mask; diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 5f0f2292b7fb..5068fe5a6910 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -21,6 +21,7 @@ #include <asm/sched_clock.h> +#include <plat/hardware.h> #include <plat/common.h> #include <plat/board.h> diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index cb856fe0434a..74300ae29b71 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -164,6 +164,8 @@ static inline void set_gdma_dev(int req, int dev) } #else #define set_gdma_dev(req, dev) do {} while (0) +#define omap_readl(reg) 0 +#define omap_writel(val, reg) do {} while (0) #endif void omap_set_dma_priority(int lch, int dst_port, int priority) diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 0b77fe87e010..652139c0339e 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -43,6 +43,8 @@ #include <plat/dmtimer.h> +#include <mach/hardware.h> + static LIST_HEAD(omap_timer_list); static DEFINE_SPINLOCK(dm_timer_lock); diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index 9e86ee0aed0a..cb75b657b04b 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -162,13 +162,6 @@ IH_MPUIO_BASE + ((nr) & 0x0f) : \ IH_GPIO_BASE + (nr)) -#define METHOD_MPUIO 0 -#define METHOD_GPIO_1510 1 -#define METHOD_GPIO_1610 2 -#define METHOD_GPIO_7XX 3 -#define METHOD_GPIO_24XX 5 -#define METHOD_GPIO_44XX 6 - struct omap_gpio_dev_attr { int bank_width; /* GPIO bank width */ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ @@ -184,10 +177,21 @@ struct omap_gpio_reg_offs { u16 irqstatus; u16 irqstatus2; u16 irqenable; + u16 irqenable2; u16 set_irqenable; u16 clr_irqenable; u16 debounce; u16 debounce_en; + u16 ctrl; + u16 wkup_en; + u16 leveldetect0; + u16 leveldetect1; + u16 risingdetect; + u16 fallingdetect; + u16 irqctrl; + u16 edgectrl1; + u16 edgectrl2; + u16 pinctrl; bool irqenable_inv; }; @@ -198,19 +202,20 @@ struct omap_gpio_platform_data { int bank_width; /* GPIO bank width */ int bank_stride; /* Only needed for omap1 MPUIO */ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ + bool loses_context; /* whether the bank would ever lose context */ + bool is_mpuio; /* whether the bank is of type MPUIO */ + u32 non_wakeup_gpios; struct omap_gpio_reg_offs *regs; -}; -/* TODO: Analyze removing gpio_bank_count usage from driver code */ -extern int gpio_bank_count; + /* Return context loss count due to PM states changing */ + int (*get_context_loss_count)(struct device *dev); +}; extern void omap2_gpio_prepare_for_idle(int off_mode); extern void omap2_gpio_resume_after_idle(void); extern void omap_set_gpio_debounce(int gpio, int enable); extern void omap_set_gpio_debounce_time(int gpio, int enable); -extern void omap_gpio_save_context(void); -extern void omap_gpio_restore_context(void); /*-------------------------------------------------------------------------*/ /* Wrappers for "new style" GPIO calls, using the new infrastructure diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h index e897978371c2..537b05ae1f51 100644 --- a/arch/arm/plat-omap/include/plat/hardware.h +++ b/arch/arm/plat-omap/include/plat/hardware.h @@ -43,6 +43,12 @@ #endif #include <plat/serial.h> +#ifdef __ASSEMBLER__ +#define IOMEM(x) (x) +#else +#define IOMEM(x) ((void __force __iomem *)(x)) +#endif + /* * --------------------------------------------------------------------------- * Common definitions for all OMAP processors diff --git a/arch/arm/plat-omap/include/plat/keypad.h b/arch/arm/plat-omap/include/plat/keypad.h index 793ce9d53294..a6b21eddb212 100644 --- a/arch/arm/plat-omap/include/plat/keypad.h +++ b/arch/arm/plat-omap/include/plat/keypad.h @@ -12,6 +12,8 @@ #ifndef CONFIG_ARCH_OMAP1 #warning Please update the board to use matrix-keypad driver +#define omap_readw(reg) 0 +#define omap_writew(val, reg) do {} while (0) #endif #include <linux/input/matrix_keypad.h> diff --git a/arch/arm/plat-omap/include/plat/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h index 3d51b18131cc..a357eb26bd25 100644 --- a/arch/arm/plat-omap/include/plat/mcspi.h +++ b/arch/arm/plat-omap/include/plat/mcspi.h @@ -18,9 +18,6 @@ struct omap2_mcspi_dev_attr { struct omap2_mcspi_device_config { unsigned turbo_mode:1; - - /* Do we want one channel enabled at the same time? */ - unsigned single_channel:1; }; #endif diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index 05f7615b61f0..4327b2c90c3d 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -36,7 +36,7 @@ #include <plat/omap_hwmod.h> -extern struct device omap_device_parent; +extern struct dev_pm_domain omap_device_pm_domain; /* omap_device._state values */ #define OMAP_DEVICE_STATE_UNKNOWN 0 diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 198d1e6a4a6c..b073e5f2b190 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -110,7 +110,6 @@ struct omap_board_data; struct omap_uart_port_info; extern void omap_serial_init(void); -extern int omap_uart_can_sleep(void); extern void omap_serial_board_init(struct omap_uart_port_info *platform_data); extern void omap_serial_init_port(struct omap_board_data *bdata, struct omap_uart_port_info *platform_data); diff --git a/arch/arm/plat-omap/include/plat/tc.h b/arch/arm/plat-omap/include/plat/tc.h index d2fcd789bb9a..1b4b2da86203 100644 --- a/arch/arm/plat-omap/include/plat/tc.h +++ b/arch/arm/plat-omap/include/plat/tc.h @@ -84,23 +84,6 @@ #define EMIFS_CCS(n) (EMIFS_CS0_CONFIG + (4 * (n))) #define EMIFS_ACS(n) (EMIFS_ACS0 + (4 * (n))) -/* Almost all documentation for chip and board memory maps assumes - * BM is clear. Most devel boards have a switch to control booting - * from NOR flash (using external chipselect 3) rather than mask ROM, - * which uses BM to interchange the physical CS0 and CS3 addresses. - */ -static inline u32 omap_cs0_phys(void) -{ - return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) - ? OMAP_CS3_PHYS : 0; -} - -static inline u32 omap_cs3_phys(void) -{ - return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) - ? 0 : OMAP_CS3_PHYS; -} - #endif /* __ASSEMBLER__ */ #endif /* __ASM_ARCH_TC_H */ diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index dc864b580da0..d0fc9f4dc155 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -3,6 +3,7 @@ #ifndef __ASM_ARCH_OMAP_USB_H #define __ASM_ARCH_OMAP_USB_H +#include <linux/io.h> #include <linux/usb/musb.h> #include <plat/board.h> @@ -105,6 +106,46 @@ extern int omap4430_phy_set_clk(struct device *dev, int on); extern int omap4430_phy_init(struct device *dev); extern int omap4430_phy_exit(struct device *dev); extern int omap4430_phy_suspend(struct device *dev, int suspend); + +/* + * NOTE: Please update omap USB drivers to use ioremap + read/write + */ + +#define OMAP2_L4_IO_OFFSET 0xb2000000 +#define IOMEM(x) ((void __force __iomem *)(x)) +#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) + +static inline u8 omap_readb(u32 pa) +{ + return __raw_readb(OMAP2_L4_IO_ADDRESS(pa)); +} + +static inline u16 omap_readw(u32 pa) +{ + return __raw_readw(OMAP2_L4_IO_ADDRESS(pa)); +} + +static inline u32 omap_readl(u32 pa) +{ + return __raw_readl(OMAP2_L4_IO_ADDRESS(pa)); +} + +static inline void omap_writeb(u8 v, u32 pa) +{ + __raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa)); +} + + +static inline void omap_writew(u16 v, u32 pa) +{ + __raw_writew(v, OMAP2_L4_IO_ADDRESS(pa)); +} + +static inline void omap_writel(u32 v, u32 pa) +{ + __raw_writel(v, OMAP2_L4_IO_ADDRESS(pa)); +} + #endif extern void am35x_musb_reset(void); diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index 0d4aa0d5876c..cff8712122bb 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -26,8 +26,11 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/io.h> -#include <asm/system.h> #include <linux/spinlock.h> + +#include <asm/system.h> + +#include <plat/cpu.h> #include <plat/mux.h> #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c index 3dc3801aace4..5a97b4d98d41 100644 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ b/arch/arm/plat-omap/omap-pm-noop.c @@ -319,7 +319,7 @@ int omap_pm_get_dev_context_loss_count(struct device *dev) if (WARN_ON(!dev)) return -ENODEV; - if (dev->parent == &omap_device_parent) { + if (dev->pm_domain == &omap_device_pm_domain) { count = omap_device_get_context_loss_count(pdev); } else { WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device", diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index 2d00ab01d150..6de28ea3cd65 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -314,8 +314,6 @@ static void _add_hwmod_clocks_clkdev(struct omap_device *od, } -static struct dev_pm_domain omap_device_pm_domain; - /** * omap_device_build_from_dt - build an omap_device with multiple hwmods * @pdev_name: name of the platform_device driver to use @@ -756,14 +754,12 @@ static int _od_suspend_noirq(struct device *dev) struct omap_device *od = to_omap_device(pdev); int ret; - if (od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND) - return pm_generic_suspend_noirq(dev); - ret = pm_generic_suspend_noirq(dev); if (!ret && !pm_runtime_status_suspended(dev)) { if (pm_generic_runtime_suspend(dev) == 0) { - omap_device_idle(pdev); + if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND)) + omap_device_idle(pdev); od->flags |= OMAP_DEVICE_SUSPENDED; } } @@ -776,13 +772,11 @@ static int _od_resume_noirq(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); - if (od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND) - return pm_generic_resume_noirq(dev); - if ((od->flags & OMAP_DEVICE_SUSPENDED) && !pm_runtime_status_suspended(dev)) { od->flags &= ~OMAP_DEVICE_SUSPENDED; - omap_device_enable(pdev); + if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND)) + omap_device_enable(pdev); pm_generic_runtime_resume(dev); } @@ -793,7 +787,7 @@ static int _od_resume_noirq(struct device *dev) #define _od_resume_noirq NULL #endif -static struct dev_pm_domain omap_device_pm_domain = { +struct dev_pm_domain omap_device_pm_domain = { .ops = { SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume, _od_runtime_idle) @@ -815,7 +809,6 @@ int omap_device_register(struct platform_device *pdev) { pr_debug("omap_device: %s: registering\n", pdev->name); - pdev->dev.parent = &omap_device_parent; pdev->dev.pm_domain = &omap_device_pm_domain; return platform_device_add(pdev); } @@ -1124,11 +1117,6 @@ int omap_device_enable_clocks(struct omap_device *od) return 0; } -struct device omap_device_parent = { - .init_name = "omap", - .parent = &platform_bus, -}; - static struct notifier_block platform_nb = { .notifier_call = _omap_device_notifier_call, }; @@ -1136,6 +1124,6 @@ static struct notifier_block platform_nb = { static int __init omap_device_init(void) { bus_register_notifier(&platform_bus_type, &platform_nb); - return device_register(&omap_device_parent); + return 0; } core_initcall(omap_device_init); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 596f2224e15a..eec98afa0f83 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -31,11 +31,10 @@ #include "sram.h" -/* XXX These "sideways" includes are a sign that something is wrong */ -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) -# include "../mach-omap2/prm2xxx_3xxx.h" -# include "../mach-omap2/sdrc.h" -#endif +/* XXX These "sideways" includes will disappear when sram.c becomes a driver */ +#include "../mach-omap2/iomap.h" +#include "../mach-omap2/prm2xxx_3xxx.h" +#include "../mach-omap2/sdrc.h" #define OMAP1_SRAM_PA 0x20000000 #define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index f3570884883e..d2bbfd1cb0b5 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -29,6 +29,10 @@ #include <plat/usb.h> #include <plat/board.h> +#include <mach/hardware.h> + +#include "../mach-omap2/common.h" + #ifdef CONFIG_ARCH_OMAP_OTG void __init diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index d8973ac46bc4..21bf6adb9198 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -4,7 +4,7 @@ config PLAT_S3C24XX bool - depends on ARCH_S3C2410 + depends on ARCH_S3C24XX default y select NO_IOPORT select ARCH_REQUIRE_GPIOLIB @@ -44,12 +44,6 @@ config S3C2410_CLOCK Clock code for the S3C2410, and similar processors which is currently includes the S3C2410, S3C2440, S3C2442. -config S3C2443_CLOCK - bool - help - Clock code for the S3C2443 and similar processors, which includes - the S3C2416 and S3C2450. - config S3C24XX_DCLK bool help @@ -76,15 +70,9 @@ config S3C24XX_GPIO_EXTRA128 Add an extra 128 gpio numbers to the available GPIO pool. This is available for boards that need extra gpios for external devices. -config PM_SIMTEC - bool - help - Common power management code for systems that are - compatible with the Simtec style of power management - -config S3C2410_DMA +config S3C24XX_DMA bool "S3C2410 DMA support" - depends on ARCH_S3C2410 + depends on ARCH_S3C24XX select S3C_DMA help S3C2410 DMA support. This is needed for drivers like sound which @@ -93,31 +81,11 @@ config S3C2410_DMA config S3C2410_DMA_DEBUG bool "S3C2410 DMA support debug" - depends on ARCH_S3C2410 && S3C2410_DMA + depends on ARCH_S3C24XX && S3C2410_DMA help Enable debugging output for the DMA code. This option sends info to the kernel log, at priority KERN_DEBUG. -# SPI default pin configuration code - -config S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13 - bool - help - SPI GPIO configuration code for BUS0 when connected to - GPE11, GPE12 and GPE13. - -config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7 - bool - help - SPI GPIO configuration code for BUS 1 when connected to - GPG5, GPG6 and GPG7. - -config S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10 - bool - help - SPI GPIO configuration code for BUS 1 when connected to - GPD8, GPD9 and GPD10. - # common code for s3c24xx based machines, such as the SMDKs. # cpu frequency items common between s3c2410 and s3c2440/s3c2442 @@ -145,21 +113,4 @@ config S3C2412_IOTIMING Intel node to select io timing code that is common to the s3c2412 and the s3c2443. -config MACH_SMDK - bool - help - Common machine code for SMDK2410 and SMDK2440 - -config S3C24XX_SIMTEC_AUDIO - bool - depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS) - default y - help - Add audio devices for common Simtec S3C24XX boards - -config S3C2410_SETUP_TS - bool - help - Compile in platform device definition for Samsung TouchScreen. - endif diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index b2b01125de66..2467b800cc76 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -23,28 +23,11 @@ obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o # Architecture dependent builds -obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o obj-$(CONFIG_PM) += sleep.o obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o -obj-$(CONFIG_S3C2443_CLOCK) += s3c2443-clock.o -obj-$(CONFIG_S3C2410_DMA) += dma.o +obj-$(CONFIG_S3C24XX_DMA) += dma.o obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o - -# device specific setup and/or initialisation -obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o -obj-$(CONFIG_S3C2410_SETUP_TS) += setup-ts.o - -# SPI gpio central GPIO functions - -obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o -obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7) += spi-bus1-gpg5_6_7.o -obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10) += spi-bus1-gpd8_9_10.o - -# machine common support - -obj-$(CONFIG_MACH_SMDK) += common-smdk.o -obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO) += simtec-audio.o diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c deleted file mode 100644 index 704175b0573f..000000000000 --- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX SPI - gpio configuration for bus 0 on gpe11,12,13 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include <linux/kernel.h> -#include <linux/gpio.h> - -#include <mach/spi.h> -#include <mach/regs-gpio.h> - -void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, - int enable) -{ - if (enable) { - s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0); - s3c_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0); - s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0); - s3c2410_gpio_pullup(S3C2410_GPE(11), 0); - s3c2410_gpio_pullup(S3C2410_GPE(13), 0); - } else { - s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT); - s3c_gpio_setpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE); - } -} diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c deleted file mode 100644 index 72457afd6255..000000000000 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c +++ /dev/null @@ -1,38 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpd8_9_10.c - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX SPI - gpio configuration for bus 1 on gpd8,9,10 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include <linux/kernel.h> -#include <linux/gpio.h> - -#include <mach/spi.h> -#include <mach/regs-gpio.h> - -void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi, - int enable) -{ - - printk(KERN_INFO "%s(%d)\n", __func__, enable); - if (enable) { - s3c_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1); - s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1); - s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1); - s3c2410_gpio_pullup(S3C2410_GPD(10), 0); - s3c2410_gpio_pullup(S3C2410_GPD(9), 0); - } else { - s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT); - s3c_gpio_setpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE); - } -} diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c deleted file mode 100644 index c3972b645d13..000000000000 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpg5_6_7.c - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX SPI - gpio configuration for bus 1 on gpg5,6,7 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include <linux/kernel.h> -#include <linux/gpio.h> - -#include <mach/spi.h> -#include <mach/regs-gpio.h> - -void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, - int enable) -{ - if (enable) { - s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1); - s3c_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1); - s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1); - s3c2410_gpio_pullup(S3C2410_GPG(5), 0); - s3c2410_gpio_pullup(S3C2410_GPG(6), 0); - } else { - s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT); - s3c_gpio_setpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE); - } -} diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c index c496b359c371..139c050918c5 100644 --- a/arch/arm/plat-s5p/irq-eint.c +++ b/arch/arm/plat-s5p/irq-eint.c @@ -200,7 +200,7 @@ static struct irq_chip s5p_irq_vic_eint = { #endif }; -int __init s5p_init_irq_eint(void) +static int __init s5p_init_irq_eint(void) { int irq; diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index 1fdfaa4599ce..82c7311017a2 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -41,7 +41,7 @@ struct s5p_gpioint_bank { void (*handler)(unsigned int, struct irq_desc *); }; -LIST_HEAD(banks); +static LIST_HEAD(banks); static int s5p_gpioint_set_type(struct irq_data *d, unsigned int type) { diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 6a2abe67c8b2..71553f410016 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -205,7 +205,7 @@ config S3C_DEV_USB_HSOTG config S3C_DEV_WDT bool - default y if ARCH_S3C2410 + default y if ARCH_S3C24XX help Complie in platform device definition for Watchdog Timer @@ -264,7 +264,7 @@ config SAMSUNG_DEV_KEYPAD config SAMSUNG_DEV_PWM bool - default y if ARCH_S3C2410 + default y if ARCH_S3C24XX help Compile in platform device definition for PWM Timer diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index d21d744e4d99..d322ba883f2f 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -744,17 +744,6 @@ struct platform_device s3c_device_iis = { }; #endif /* CONFIG_PLAT_S3C24XX */ -#ifdef CONFIG_CPU_S3C2440 -struct platform_device s3c2412_device_iis = { - .name = "s3c2412-iis", - .id = -1, - .dev = { - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - } -}; -#endif /* CONFIG_CPU_S3C2440 */ - /* IDE CFCON */ #ifdef CONFIG_SAMSUNG_DEV_IDE @@ -1078,7 +1067,7 @@ static struct resource s5p_pmu_resource[] = { DEFINE_RES_IRQ(IRQ_PMU) }; -struct platform_device s5p_device_pmu = { +static struct platform_device s5p_device_pmu = { .name = "arm-pmu", .id = ARM_PMU_DEVICE_CPU, .num_resources = ARRAY_SIZE(s5p_pmu_resource), diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index 0747c77a2fd5..301d9c319d0b 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -116,7 +116,7 @@ static inline int samsung_dmadev_flush(unsigned ch) return dmaengine_terminate_all((struct dma_chan *)ch); } -struct samsung_dma_ops dmadev_ops = { +static struct samsung_dma_ops dmadev_ops = { .request = samsung_dmadev_request, .release = samsung_dmadev_release, .prepare = samsung_dmadev_prepare, diff --git a/arch/arm/plat-samsung/include/plat/audio-simtec.h b/arch/arm/plat-samsung/include/plat/audio-simtec.h index 5345364e7420..376af5286a3e 100644 --- a/arch/arm/plat-samsung/include/plat/audio-simtec.h +++ b/arch/arm/plat-samsung/include/plat/audio-simtec.h @@ -32,6 +32,3 @@ struct s3c24xx_audio_simtec_pdata { void (*startup)(void); }; - -extern int simtec_audio_add(const char *codec_name, bool has_lr_routing, - struct s3c24xx_audio_simtec_pdata *pdata); diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 73c66d4d10fa..a62753dc15ba 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -79,6 +79,10 @@ extern struct clk clk_epll; extern struct clk clk_xtal; extern struct clk clk_ext; +/* S3C2443/S3C2416 specific clocks */ +extern struct clksrc_clk clk_epllref; +extern struct clksrc_clk clk_esysclk; + /* S3C64XX specific clocks */ extern struct clk clk_h2; extern struct clk clk_27m; @@ -114,7 +118,23 @@ extern void s3c24xx_setup_clocks(unsigned long fclk, extern void s3c2410_setup_clocks(void); extern void s3c2412_setup_clocks(void); extern void s3c244x_setup_clocks(void); -extern void s3c2443_setup_clocks(void); + +/* S3C2410 specific clock functions */ + +extern int s3c2410_baseclk_add(void); + +/* S3C2443/S3C2416 specific clock functions */ + +typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base); + +extern void s3c2443_common_setup_clocks(pll_fn get_mpll); +extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, + unsigned int *divs, int nr_divs, + int divmask); + +extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable); +extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable); +extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable); /* S3C64XX specific functions and clocks */ diff --git a/arch/arm/plat-samsung/include/plat/regs-dma.h b/arch/arm/plat-samsung/include/plat/regs-dma.h index 178bccbe4804..a7d622ef16af 100644 --- a/arch/arm/plat-samsung/include/plat/regs-dma.h +++ b/arch/arm/plat-samsung/include/plat/regs-dma.h @@ -119,7 +119,7 @@ #define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24) #endif /* CONFIG_CPU_S3C2412 */ -#ifdef CONFIG_CPU_S3C2443 +#if defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2443) #define S3C2443_DMAREQSEL_SRC(x) ((x) << 1) diff --git a/arch/arm/plat-samsung/include/plat/s3c2410.h b/arch/arm/plat-samsung/include/plat/s3c2410.h index 3986497dd3f7..55b0e5f51e97 100644 --- a/arch/arm/plat-samsung/include/plat/s3c2410.h +++ b/arch/arm/plat-samsung/include/plat/s3c2410.h @@ -29,5 +29,3 @@ extern void s3c2410_init_clocks(int xtal); #define s3c2410_init NULL #define s3c2410a_init NULL #endif - -extern int s3c2410_baseclk_add(void); diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h index dce05b43d51c..a5b794ff838b 100644 --- a/arch/arm/plat-samsung/include/plat/s3c2443.h +++ b/arch/arm/plat-samsung/include/plat/s3c2443.h @@ -32,23 +32,3 @@ extern void s3c2443_restart(char mode, const char *cmd); #define s3c2443_init NULL #define s3c2443_restart NULL #endif - -/* common code used by s3c2443 and others. - * note, not to be used outside of arch/arm/mach-s3c* */ - -struct clk; /* some files don't need clk.h otherwise */ - -typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base); - -extern void s3c2443_common_setup_clocks(pll_fn get_mpll); -extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, - unsigned int *divs, int nr_divs, - int divmask); - -extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable); -extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable); -extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable); - -extern struct clksrc_clk clk_epllref; -extern struct clksrc_clk clk_esysclk; -extern struct clksrc_clk clk_msysclk; diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h index 8181293115e4..16a24b14146c 100644 --- a/arch/avr32/mach-at32ap/include/mach/cpu.h +++ b/arch/avr32/mach-at32ap/include/mach/cpu.h @@ -30,9 +30,6 @@ #define cpu_is_at91sam9261() (0) #define cpu_is_at91sam9263() (0) #define cpu_is_at91sam9rl() (0) -#define cpu_is_at91cap9() (0) -#define cpu_is_at91cap9_revB() (0) -#define cpu_is_at91cap9_revC() (0) #define cpu_is_at91sam9g10() (0) #define cpu_is_at91sam9g20() (0) #define cpu_is_at91sam9g45() (0) |
