diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/mach-omap2/Kconfig | 6 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-4430sdp.c | 148 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-cm-t35.c | 77 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3beagle.c | 78 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-rx51-peripherals.c | 135 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/devices.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/Kconfig | 23 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/include/mach/irqs.h | 4 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/mach-crag6410.c | 774 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/omap4-keypad.h | 3 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/uncompress.h | 1 |
12 files changed, 1205 insertions, 48 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 19d5891c48e3..4ae6257b39a4 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -266,9 +266,10 @@ config MACH_OMAP_ZOOM3 select REGULATOR_FIXED_VOLTAGE config MACH_CM_T35 - bool "CompuLab CM-T35 module" + bool "CompuLab CM-T35/CM-T3730 modules" depends on ARCH_OMAP3 default y + select MACH_CM_T3730 select OMAP_PACKAGE_CUS config MACH_CM_T3517 @@ -277,6 +278,9 @@ config MACH_CM_T3517 default y select OMAP_PACKAGE_CBB +config MACH_CM_T3730 + bool + config MACH_IGEP0020 bool "IGEP v2 board" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 933b25bb10de..a7c0b31fd084 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -22,6 +22,7 @@ #include <linux/i2c/twl.h> #include <linux/gpio_keys.h> #include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <linux/leds.h> #include <linux/leds_pwm.h> @@ -37,6 +38,7 @@ #include <plat/mmc.h> #include <plat/omap4-keypad.h> #include <video/omapdss.h> +#include <linux/wl12xx.h> #include "mux.h" #include "hsmmc.h" @@ -51,6 +53,9 @@ #define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define GPIO_WIFI_PMENA 54 +#define GPIO_WIFI_IRQ 53 + static const int sdp4430_keymap[] = { KEY(0, 0, KEY_E), KEY(0, 1, KEY_R), @@ -124,6 +129,64 @@ static const int sdp4430_keymap[] = { KEY(7, 6, KEY_OK), KEY(7, 7, KEY_DOWN), }; +static struct omap_device_pad keypad_pads[] __initdata = { + { .name = "kpd_col1.kpd_col1", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "kpd_col1.kpd_col1", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "kpd_col2.kpd_col2", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "kpd_col3.kpd_col3", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "kpd_col4.kpd_col4", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "kpd_col5.kpd_col5", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "gpmc_a23.kpd_col7", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "gpmc_a22.kpd_col6", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "kpd_row0.kpd_row0", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, + { .name = "kpd_row1.kpd_row1", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, + { .name = "kpd_row2.kpd_row2", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, + { .name = "kpd_row3.kpd_row3", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, + { .name = "kpd_row4.kpd_row4", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, + { .name = "kpd_row5.kpd_row5", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, + { .name = "gpmc_a18.kpd_row6", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, + { .name = "gpmc_a19.kpd_row7", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, +}; static struct matrix_keymap_data sdp4430_keymap_data = { .keymap = sdp4430_keymap, @@ -135,6 +198,13 @@ static struct omap4_keypad_platform_data sdp4430_keypad_data = { .rows = 8, .cols = 8, }; + +static struct omap_board_data keypad_data = { + .id = 1, + .pads = keypad_pads, + .pads_cnt = ARRAY_SIZE(keypad_pads), +}; + static struct gpio_led sdp4430_gpio_leds[] = { { .name = "omap4:green:debug0", @@ -315,8 +385,17 @@ static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, }, + { + .mmc = 5, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + .ocr_mask = MMC_VDD_165_195, + .nonremovable = true, + }, {} /* Terminator */ }; @@ -324,6 +403,37 @@ static struct regulator_consumer_supply sdp4430_vaux_supply[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), }; +static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = { + .supply = "vmmc", + .dev_name = "omap_hsmmc.4", +}; + +static struct regulator_init_data sdp4430_vmmc5 = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &omap4_sdp4430_vmmc5_supply, +}; + +static struct fixed_voltage_config sdp4430_vwlan = { + .supply_name = "vwl1271", + .microvolts = 1800000, /* 1.8V */ + .gpio = GPIO_WIFI_PMENA, + .startup_delay = 70000, /* 70msec */ + .enable_high = 1, + .enabled_at_boot = 0, + .init_data = &sdp4430_vmmc5, +}; + +static struct platform_device omap_vwlan_device = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &sdp4430_vwlan, + }, +}; + static int omap4_twl6030_hsmmc_late_init(struct device *dev) { int ret = 0; @@ -593,6 +703,41 @@ static inline void board_serial_init(void) } #endif +static void omap4_sdp4430_wifi_mux_init(void) +{ + omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT | + OMAP_PIN_OFF_WAKEUPENABLE); + omap_mux_init_gpio(GPIO_WIFI_PMENA, OMAP_PIN_OUTPUT); + + omap_mux_init_signal("sdmmc5_cmd.sdmmc5_cmd", + OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc5_clk.sdmmc5_clk", + OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc5_dat0.sdmmc5_dat0", + OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc5_dat1.sdmmc5_dat1", + OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc5_dat2.sdmmc5_dat2", + OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc5_dat3.sdmmc5_dat3", + OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); + +} + +static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = { + .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ), + .board_ref_clock = WL12XX_REFCLOCK_26, + .board_tcxo_clock = WL12XX_TCXOCLOCK_26, +}; + +static void omap4_sdp4430_wifi_init(void) +{ + omap4_sdp4430_wifi_mux_init(); + if (wl12xx_set_platform_data(&omap4_sdp4430_wlan_data)) + pr_err("Error setting wl12xx data\n"); + platform_device_register(&omap_vwlan_device); +} + static void __init omap_4430sdp_init(void) { int status; @@ -609,6 +754,7 @@ static void __init omap_4430sdp_init(void) omap_sfh7741prox_init(); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); board_serial_init(); + omap4_sdp4430_wifi_init(); omap4_twl6030_hsmmc_init(mmc); usb_musb_init(&musb_board_data); @@ -622,7 +768,7 @@ static void __init omap_4430sdp_init(void) ARRAY_SIZE(sdp4430_spi_board_info)); } - status = omap4_keyboard_init(&sdp4430_keypad_data); + status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data); if (status) pr_err("Keypad initialization failed: %d\n", status); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index f0749215df11..3af8aab435b5 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -1,5 +1,5 @@ /* - * board-cm-t35.c (CompuLab CM-T35 module) + * CompuLab CM-T35/CM-T3730 modules support * * Copyright (C) 2009-2011 CompuLab, Ltd. * Authors: Mike Rapoport <mike@compulab.co.il> @@ -535,17 +535,11 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - /* DSS */ + /* common DSS */ OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), @@ -558,12 +552,6 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), /* display controls */ OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), @@ -576,19 +564,53 @@ static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; + +static void __init cm_t3x_common_dss_mux_init(int mux_mode) +{ + omap_mux_init_signal("dss_data18", mux_mode); + omap_mux_init_signal("dss_data19", mux_mode); + omap_mux_init_signal("dss_data20", mux_mode); + omap_mux_init_signal("dss_data21", mux_mode); + omap_mux_init_signal("dss_data22", mux_mode); + omap_mux_init_signal("dss_data23", mux_mode); +} + +static void __init cm_t35_init_mux(void) +{ + omap_mux_init_signal("gpio_70", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("gpio_71", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("gpio_72", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("gpio_73", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("gpio_74", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("gpio_75", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + cm_t3x_common_dss_mux_init(OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); +} + +static void __init cm_t3730_init_mux(void) +{ + omap_mux_init_signal("sys_boot0", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("sys_boot1", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("sys_boot3", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("sys_boot4", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("sys_boot5", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("sys_boot6", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + cm_t3x_common_dss_mux_init(OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); +} +#else +static inline void cm_t35_init_mux(void) {} +static inline void cm_t3730_init_mux(void) {} #endif static struct omap_board_config_kernel cm_t35_config[] __initdata = { }; -static void __init cm_t35_init(void) +static void __init cm_t3x_common_init(void) { omap_board_config = cm_t35_config; omap_board_config_size = ARRAY_SIZE(cm_t35_config); omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_serial_init(); cm_t35_init_i2c(); - cm_t35_init_nand(); omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL); cm_t35_init_ethernet(); cm_t35_init_led(); @@ -598,6 +620,19 @@ static void __init cm_t35_init(void) usbhs_init(&usbhs_bdata); } +static void __init cm_t35_init(void) +{ + cm_t3x_common_init(); + cm_t35_init_mux(); + cm_t35_init_nand(); +} + +static void __init cm_t3730_init(void) +{ + cm_t3x_common_init(); + cm_t3730_init_mux(); +} + MACHINE_START(CM_T35, "Compulab CM-T35") .boot_params = 0x80000100, .reserve = omap_reserve, @@ -607,3 +642,13 @@ MACHINE_START(CM_T35, "Compulab CM-T35") .init_machine = cm_t35_init, .timer = &omap3_timer, MACHINE_END + +MACHINE_START(CM_T3730, "Compulab CM-T3730") + .boot_params = 0x80000100, + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = cm_t35_init_early, + .init_irq = omap3_init_irq, + .init_machine = cm_t3730_init, + .timer = &omap3_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 34f841112768..32f5f895568a 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -60,7 +60,8 @@ * AXBX = GPIO173, GPIO172, GPIO171: 1 1 1 * C1_3 = GPIO173, GPIO172, GPIO171: 1 1 0 * C4 = GPIO173, GPIO172, GPIO171: 1 0 1 - * XM = GPIO173, GPIO172, GPIO171: 0 0 0 + * XMA/XMB = GPIO173, GPIO172, GPIO171: 0 0 0 + * XMC = GPIO173, GPIO172, GPIO171: 0 1 0 */ enum { OMAP3BEAGLE_BOARD_UNKN = 0, @@ -68,14 +69,26 @@ enum { OMAP3BEAGLE_BOARD_C1_3, OMAP3BEAGLE_BOARD_C4, OMAP3BEAGLE_BOARD_XM, + OMAP3BEAGLE_BOARD_XMC, }; static u8 omap3_beagle_version; -static u8 omap3_beagle_get_rev(void) -{ - return omap3_beagle_version; -} +/* + * Board-specific configuration + * Defaults to BeagleBoard-xMC + */ +static struct { + int mmc1_gpio_wp; + int usb_pwr_level; + int reset_gpio; + int usr_button_gpio; +} beagle_config = { + .mmc1_gpio_wp = -EINVAL, + .usb_pwr_level = GPIOF_OUT_INIT_LOW, + .reset_gpio = 129, + .usr_button_gpio = 4, +}; static struct gpio omap3_beagle_rev_gpios[] __initdata = { { 171, GPIOF_IN, "rev_id_0" }, @@ -110,18 +123,32 @@ static void __init omap3_beagle_init_rev(void) case 7: printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX; + beagle_config.mmc1_gpio_wp = 29; + beagle_config.reset_gpio = 170; + beagle_config.usr_button_gpio = 7; break; case 6: printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3; + beagle_config.mmc1_gpio_wp = 23; + beagle_config.reset_gpio = 170; + beagle_config.usr_button_gpio = 7; break; case 5: printk(KERN_INFO "OMAP3 Beagle Rev: C4\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C4; + beagle_config.mmc1_gpio_wp = 23; + beagle_config.reset_gpio = 170; + beagle_config.usr_button_gpio = 7; break; case 0: - printk(KERN_INFO "OMAP3 Beagle Rev: xM\n"); + printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_XM; + beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH; + break; + case 2: + printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n"); + omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC; break; default: printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev); @@ -225,7 +252,7 @@ static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, - .gpio_wp = 29, + .gpio_wp = -EINVAL, }, {} /* Terminator */ }; @@ -243,17 +270,11 @@ static struct gpio_led gpio_leds[]; static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int r, usb_pwr_level; - - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { - mmc[0].gpio_wp = -EINVAL; - } else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) || - (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) { - omap_mux_init_gpio(23, OMAP_PIN_INPUT); - mmc[0].gpio_wp = 23; - } else { - omap_mux_init_gpio(29, OMAP_PIN_INPUT); - } + int r; + + if (beagle_config.mmc1_gpio_wp != -EINVAL) + omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); + mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp; /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); @@ -263,9 +284,8 @@ static int beagle_twl_gpio_setup(struct device *dev, * high / others active low) * DVI reset GPIO is different between beagle revisions */ - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { - usb_pwr_level = GPIOF_OUT_INIT_HIGH; - beagle_dvi_device.reset_gpio = 129; + /* Valid for all -xM revisions */ + if (cpu_is_omap3630()) { /* * gpio + 1 on Xm controls the TFP410's enable line (active low) * gpio + 2 control varies depending on the board rev as below: @@ -283,8 +303,6 @@ static int beagle_twl_gpio_setup(struct device *dev, pr_err("%s: unable to configure DVI_LDO_EN\n", __func__); } else { - usb_pwr_level = GPIOF_OUT_INIT_LOW; - beagle_dvi_device.reset_gpio = 170; /* * REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect @@ -292,8 +310,10 @@ static int beagle_twl_gpio_setup(struct device *dev, if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) pr_err("%s: unable to configure EHCI_nOC\n", __func__); } + beagle_dvi_device.reset_gpio = beagle_config.reset_gpio; - gpio_request_one(gpio + TWL4030_GPIO_MAX, usb_pwr_level, "nEN_USB_PWR"); + gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, + "nEN_USB_PWR"); /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -404,7 +424,8 @@ static struct platform_device leds_gpio = { static struct gpio_keys_button gpio_buttons[] = { { .code = BTN_EXTRA, - .gpio = 7, + /* Dynamically assigned depending on board */ + .gpio = -EINVAL, .desc = "user", .wakeup = 1, }, @@ -468,8 +489,8 @@ static void __init beagle_opp_init(void) return; } - /* Custom OPP enabled for XM */ - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { + /* Custom OPP enabled for all xM versions */ + if (cpu_is_omap3630()) { struct omap_hwmod *mh = omap_hwmod_lookup("mpu"); struct omap_hwmod *dh = omap_hwmod_lookup("iva"); struct device *dev; @@ -509,6 +530,9 @@ static void __init omap3_beagle_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_init_rev(); omap3_beagle_i2c_init(); + + gpio_buttons[0].gpio = beagle_config.usr_button_gpio; + platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); omap_display_init(&beagle_dss_data); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index bdb24db36004..0c9e0f28ed07 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -39,6 +39,7 @@ #include <sound/tpa6130a2-plat.h> #include <media/radio-si4713.h> #include <media/si4713.h> +#include <linux/leds-lp5523.h> #include <../drivers/staging/iio/light/tsl2563.h> @@ -53,6 +54,7 @@ #define RX51_WL1251_IRQ_GPIO 42 #define RX51_FMTX_RESET_GPIO 163 #define RX51_FMTX_IRQ 53 +#define RX51_LP5523_CHIP_EN_GPIO 41 #define RX51_USB_TRANSCEIVER_RST_GPIO 67 @@ -71,6 +73,64 @@ static struct tsl2563_platform_data rx51_tsl2563_platform_data = { }; #endif +#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) +static struct lp5523_led_config rx51_lp5523_led_config[] = { + { + .chan_nr = 0, + .led_current = 50, + }, { + .chan_nr = 1, + .led_current = 50, + }, { + .chan_nr = 2, + .led_current = 50, + }, { + .chan_nr = 3, + .led_current = 50, + }, { + .chan_nr = 4, + .led_current = 50, + }, { + .chan_nr = 5, + .led_current = 50, + }, { + .chan_nr = 6, + .led_current = 50, + }, { + .chan_nr = 7, + .led_current = 50, + }, { + .chan_nr = 8, + .led_current = 50, + } +}; + +static int rx51_lp5523_setup(void) +{ + return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT, + "lp5523_enable"); +} + +static void rx51_lp5523_release(void) +{ + gpio_free(RX51_LP5523_CHIP_EN_GPIO); +} + +static void rx51_lp5523_enable(bool state) +{ + gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state); +} + +static struct lp5523_platform_data rx51_lp5523_platform_data = { + .led_config = rx51_lp5523_led_config, + .num_channels = ARRAY_SIZE(rx51_lp5523_led_config), + .clock_mode = LP5523_CLOCK_AUTO, + .setup_resources = rx51_lp5523_setup, + .release_resources = rx51_lp5523_release, + .enable = rx51_lp5523_enable, +}; +#endif + static struct omap2_mcspi_device_config wl1251_mcspi_config = { .turbo_mode = 0, .single_channel = 1, @@ -495,6 +555,32 @@ static struct regulator_init_data rx51_vmmc2 = { .consumer_supplies = rx51_vmmc2_supplies, }; +static struct regulator_init_data rx51_vpll1 = { + .constraints = { + .name = "VPLL", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + +static struct regulator_init_data rx51_vpll2 = { + .constraints = { + .name = "VSDI_CSI", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + static struct regulator_init_data rx51_vsim = { .constraints = { .name = "VMMC2_IO_18", @@ -524,6 +610,43 @@ static struct regulator_init_data rx51_vio = { .consumer_supplies = rx51_vio_supplies, }; +static struct regulator_init_data rx51_vintana1 = { + .constraints = { + .name = "VINTANA1", + .min_uV = 1500000, + .max_uV = 1500000, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + +static struct regulator_init_data rx51_vintana2 = { + .constraints = { + .name = "VINTANA2", + .min_uV = 2750000, + .max_uV = 2750000, + .apply_uV = true, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + +static struct regulator_init_data rx51_vintdig = { + .constraints = { + .name = "VINTDIG", + .min_uV = 1500000, + .max_uV = 1500000, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = { .gpio_reset = RX51_FMTX_RESET_GPIO, }; @@ -761,7 +884,12 @@ static struct twl4030_platform_data rx51_twldata __initdata = { .vaux2 = &rx51_vaux2, .vaux4 = &rx51_vaux4, .vmmc1 = &rx51_vmmc1, + .vpll1 = &rx51_vpll1, + .vpll2 = &rx51_vpll2, .vsim = &rx51_vsim, + .vintana1 = &rx51_vintana1, + .vintana2 = &rx51_vintana2, + .vintdig = &rx51_vintdig, .vio = &rx51_vio, }; @@ -800,6 +928,12 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { .platform_data = &rx51_tsl2563_platform_data, }, #endif +#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) + { + I2C_BOARD_INFO("lp5523", 0x32), + .platform_data = &rx51_lp5523_platform_data, + }, +#endif { I2C_BOARD_INFO("tpa6130a2", 0x60), .platform_data = &rx51_tpa6130a2_data, @@ -950,6 +1084,7 @@ error: void __init rx51_peripherals_init(void) { rx51_i2c_init(); + regulator_has_full_constraints(); gpmc_onenand_init(board_onenand_data); board_smc91x_init(); rx51_add_gpio_keys(); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 5b8ca680ed93..1077ad663f93 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -230,7 +230,7 @@ struct omap_device_pm_latency omap_keyboard_latency[] = { }; int __init omap4_keyboard_init(struct omap4_keypad_platform_data - *sdp4430_keypad_data) + *sdp4430_keypad_data, struct omap_board_data *bdata) { struct omap_device *od; struct omap_hwmod *oh; @@ -257,6 +257,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data name, oh->name); return PTR_ERR(od); } + oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt); return 0; } diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index fdc89fc3b464..f057b6ae4f90 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -267,3 +267,26 @@ config MACH_SMARTQ7 select MACH_SMARTQ help Machine support for the SmartQ 7 + +config MACH_WLF_CRAGG_6410 + bool "Wolfson Cragganmore 6410" + select CPU_S3C6410 + select S3C64XX_SETUP_SDHCI + select S3C64XX_SETUP_I2C1 + select S3C64XX_SETUP_IDE + select S3C64XX_SETUP_FB_24BPP + select S3C64XX_SETUP_KEYPAD + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_KEYPAD + select S3C_DEV_USB_HOST + select S3C_DEV_USB_HSOTG + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_I2C1 + select S3C_DEV_WDT + select S3C_DEV_RTC + select S3C64XX_DEV_SPI + select S3C24XX_GPIO_EXTRA128 + help + Machine support for the Wolfson Cragganmore S3C6410 variant. diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index f5a7144a052f..61b4034a0c22 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -55,6 +55,7 @@ obj-$(CONFIG_MACH_HMT) += mach-hmt.o obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o +obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o # device support diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h index 8e2df26cf14a..ddb63a1863ab 100644 --- a/arch/arm/mach-s3c64xx/include/mach/irqs.h +++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h @@ -198,7 +198,9 @@ * interrupt controllers). */ #define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1) -#ifdef CONFIG_SMDK6410_WM1190_EV1 +#ifdef CONFIG_MACH_WLF_CRAGG_6410 +#define IRQ_BOARD_NR 128 +#elif defined(CONFIG_SMDK6410_WM1190_EV1) #define IRQ_BOARD_NR 64 #elif defined(CONFIG_SMDK6410_WM1192_EV1) #define IRQ_BOARD_NR 64 diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c new file mode 100644 index 000000000000..9026249233ad --- /dev/null +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -0,0 +1,774 @@ +/* linux/arch/arm/mach-s3c64xx/mach-crag6410.c + * + * Copyright 2011 Wolfson Microelectronics plc + * Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * Copyright 2011 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/fb.h> +#include <linux/io.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/pwm_backlight.h> +#include <linux/dm9000.h> +#include <linux/gpio_keys.h> +#include <linux/basic_mmio_gpio.h> +#include <linux/spi/spi.h> + +#include <linux/i2c/pca953x.h> + +#include <video/platform_lcd.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/pdata.h> +#include <linux/mfd/wm831x/irq.h> +#include <linux/mfd/wm831x/gpio.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <mach/hardware.h> +#include <mach/map.h> + +#include <mach/s3c6410.h> +#include <mach/regs-sys.h> +#include <mach/regs-gpio.h> +#include <mach/regs-modem.h> + +#include <mach/regs-gpio-memport.h> + +#include <plat/regs-serial.h> +#include <plat/regs-fb-v4.h> +#include <plat/fb.h> +#include <plat/sdhci.h> +#include <plat/gpio-cfg.h> +#include <plat/s3c64xx-spi.h> + +#include <plat/keypad.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/adc.h> +#include <plat/iic.h> +#include <plat/pm.h> + +#include <sound/wm8915.h> +#include <sound/wm8962.h> +#include <sound/wm9081.h> + +#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START +#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64) + +#define PCA935X_GPIO_BASE GPIO_BOARD_START +#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) +#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16) + +/* serial port setup */ + +#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) +#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) +#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) + +static struct s3c2410_uartcfg crag6410_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, +}; + +static struct platform_pwm_backlight_data crag6410_backlight_data = { + .pwm_id = 0, + .max_brightness = 1000, + .dft_brightness = 600, + .pwm_period_ns = 100000, /* about 1kHz */ +}; + +static struct platform_device crag6410_backlight_device = { + .name = "pwm-backlight", + .id = -1, + .dev = { + .parent = &s3c_device_timer[0].dev, + .platform_data = &crag6410_backlight_data, + }, +}; + +static void crag6410_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) +{ + pr_debug("%s: setting power %d\n", __func__, power); + + if (power) { + gpio_set_value(S3C64XX_GPB(0), 1); + msleep(1); + s3c_gpio_cfgpin(S3C64XX_GPF(14), S3C_GPIO_SFN(2)); + } else { + gpio_direction_output(S3C64XX_GPF(14), 0); + gpio_set_value(S3C64XX_GPB(0), 0); + } +} + +static struct platform_device crag6410_lcd_powerdev = { + .name = "platform-lcd", + .id = -1, + .dev.parent = &s3c_device_fb.dev, + .dev.platform_data = &(struct plat_lcd_data) { + .set_power = crag6410_lcd_power_set, + }, +}; + +/* 640x480 URT */ +static struct s3c_fb_pd_win crag6410_fb_win0 = { + /* this is to ensure we use win0 */ + .win_mode = { + .left_margin = 150, + .right_margin = 80, + .upper_margin = 40, + .lower_margin = 5, + .hsync_len = 40, + .vsync_len = 5, + .xres = 640, + .yres = 480, + }, + .max_bpp = 32, + .default_bpp = 16, + .virtual_y = 480 * 2, + .virtual_x = 640, +}; + +/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */ +static struct s3c_fb_platdata crag6410_lcd_pdata __initdata = { + .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, + .win[0] = &crag6410_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, +}; + +/* 2x6 keypad */ + +static uint32_t crag6410_keymap[] __initdata = { + /* KEY(row, col, keycode) */ + KEY(0, 0, KEY_VOLUMEUP), + KEY(0, 1, KEY_HOME), + KEY(0, 2, KEY_VOLUMEDOWN), + KEY(0, 3, KEY_HELP), + KEY(0, 4, KEY_MENU), + KEY(0, 5, KEY_MEDIA), + KEY(1, 0, 232), + KEY(1, 1, KEY_DOWN), + KEY(1, 2, KEY_LEFT), + KEY(1, 3, KEY_UP), + KEY(1, 4, KEY_RIGHT), + KEY(1, 5, KEY_CAMERA), +}; + +static struct matrix_keymap_data crag6410_keymap_data __initdata = { + .keymap = crag6410_keymap, + .keymap_size = ARRAY_SIZE(crag6410_keymap), +}; + +static struct samsung_keypad_platdata crag6410_keypad_data __initdata = { + .keymap_data = &crag6410_keymap_data, + .rows = 2, + .cols = 6, +}; + +static struct gpio_keys_button crag6410_gpio_keys[] = { + [0] = { + .code = KEY_SUSPEND, + .gpio = S3C64XX_GPL(10), /* EINT 18 */ + .type = EV_KEY, + .wakeup = 1, + .active_low = 1, + }, + [1] = { + .code = SW_FRONT_PROXIMITY, + .gpio = S3C64XX_GPN(11), /* EINT 11 */ + .type = EV_SW, + }, +}; + +static struct gpio_keys_platform_data crag6410_gpio_keydata = { + .buttons = crag6410_gpio_keys, + .nbuttons = ARRAY_SIZE(crag6410_gpio_keys), +}; + +static struct platform_device crag6410_gpio_keydev = { + .name = "gpio-keys", + .id = 0, + .dev.platform_data = &crag6410_gpio_keydata, +}; + +static struct resource crag6410_dm9k_resource[] = { + [0] = { + .start = S3C64XX_PA_XM0CSN5, + .end = S3C64XX_PA_XM0CSN5 + 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = S3C64XX_PA_XM0CSN5 + (1 << 8), + .end = S3C64XX_PA_XM0CSN5 + (1 << 8) + 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = S3C_EINT(17), + .end = S3C_EINT(17), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct dm9000_plat_data mini6410_dm9k_pdata = { + .flags = DM9000_PLATF_16BITONLY, +}; + +static struct platform_device crag6410_dm9k_device = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(crag6410_dm9k_resource), + .resource = crag6410_dm9k_resource, + .dev.platform_data = &mini6410_dm9k_pdata, +}; + +static struct resource crag6410_mmgpio_resource[] = { + [0] = { + .start = S3C64XX_PA_XM0CSN4 + 1, + .end = S3C64XX_PA_XM0CSN4 + 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device crag6410_mmgpio = { + .name = "basic-mmio-gpio", + .id = -1, + .resource = crag6410_mmgpio_resource, + .num_resources = ARRAY_SIZE(crag6410_mmgpio_resource), + .dev.platform_data = &(struct bgpio_pdata) { + .base = -1, + }, +}; + +static struct platform_device speyside_device = { + .name = "speyside", + .id = -1, +}; + +static struct platform_device speyside_wm8962_device = { + .name = "speyside-wm8962", + .id = -1, +}; + +static struct regulator_consumer_supply wallvdd_consumers[] = { + REGULATOR_SUPPLY("SPKVDD1", "1-001a"), + REGULATOR_SUPPLY("SPKVDD2", "1-001a"), +}; + +static struct regulator_init_data wallvdd_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(wallvdd_consumers), + .consumer_supplies = wallvdd_consumers, +}; + +static struct fixed_voltage_config wallvdd_pdata = { + .supply_name = "WALLVDD", + .microvolts = 5000000, + .init_data = &wallvdd_data, + .gpio = -EINVAL, +}; + +static struct platform_device wallvdd_device = { + .name = "reg-fixed-voltage", + .id = -1, + .dev = { + .platform_data = &wallvdd_pdata, + }, +}; + +static struct platform_device *crag6410_devices[] __initdata = { + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, + &s3c_device_i2c0, + &s3c_device_i2c1, + &s3c_device_fb, + &s3c_device_ohci, + &s3c_device_usb_hsotg, + &s3c_device_adc, + &s3c_device_rtc, + &s3c_device_ts, + &s3c_device_timer[0], + &s3c64xx_device_iis0, + &s3c64xx_device_iis1, + &samsung_asoc_dma, + &samsung_device_keypad, + &crag6410_gpio_keydev, + &crag6410_dm9k_device, + &s3c64xx_device_spi0, + &crag6410_mmgpio, + &crag6410_lcd_powerdev, + &crag6410_backlight_device, + &speyside_device, + &speyside_wm8962_device, + &wallvdd_device, +}; + +static struct pca953x_platform_data crag6410_pca_data = { + .gpio_base = PCA935X_GPIO_BASE, + .irq_base = 0, +}; + +static struct regulator_consumer_supply vddarm_consumers[] __initdata = { + REGULATOR_SUPPLY("vddarm", NULL), +}; + +static struct regulator_init_data vddarm __initdata = { + .constraints = { + .name = "VDDARM", + .min_uV = 1000000, + .max_uV = 1300000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = ARRAY_SIZE(vddarm_consumers), + .consumer_supplies = vddarm_consumers, + .supply_regulator = "WALLVDD", +}; + +static struct regulator_init_data vddint __initdata = { + .constraints = { + .name = "VDDINT", + .min_uV = 1000000, + .max_uV = 1200000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, +}; + +static struct regulator_init_data vddmem __initdata = { + .constraints = { + .name = "VDDMEM", + .always_on = 1, + }, +}; + +static struct regulator_init_data vddsys __initdata = { + .constraints = { + .name = "VDDSYS,VDDEXT,VDDPCM,VDDSS", + .always_on = 1, + }, +}; + +static struct regulator_consumer_supply vddmmc_consumers[] __initdata = { + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.1"), + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), +}; + +static struct regulator_init_data vddmmc __initdata = { + .constraints = { + .name = "VDDMMC,UH", + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(vddmmc_consumers), + .consumer_supplies = vddmmc_consumers, + .supply_regulator = "WALLVDD", +}; + +static struct regulator_init_data vddotgi __initdata = { + .constraints = { + .name = "VDDOTGi", + .always_on = 1, + }, + .supply_regulator = "WALLVDD", +}; + +static struct regulator_init_data vddotg __initdata = { + .constraints = { + .name = "VDDOTG", + .always_on = 1, + }, + .supply_regulator = "WALLVDD", +}; + +static struct regulator_init_data vddhi __initdata = { + .constraints = { + .name = "VDDHI", + .always_on = 1, + }, + .supply_regulator = "WALLVDD", +}; + +static struct regulator_init_data vddadc __initdata = { + .constraints = { + .name = "VDDADC,VDDDAC", + .always_on = 1, + }, + .supply_regulator = "WALLVDD", +}; + +static struct regulator_init_data vddmem0 __initdata = { + .constraints = { + .name = "VDDMEM0", + .always_on = 1, + }, + .supply_regulator = "WALLVDD", +}; + +static struct regulator_init_data vddpll __initdata = { + .constraints = { + .name = "VDDPLL", + .always_on = 1, + }, + .supply_regulator = "WALLVDD", +}; + +static struct regulator_init_data vddlcd __initdata = { + .constraints = { + .name = "VDDLCD", + .always_on = 1, + }, + .supply_regulator = "WALLVDD", +}; + +static struct regulator_init_data vddalive __initdata = { + .constraints = { + .name = "VDDALIVE", + .always_on = 1, + }, + .supply_regulator = "WALLVDD", +}; + +static struct wm831x_backup_pdata banff_backup_pdata __initdata = { + .charger_enable = 1, + .vlim = 2500, /* mV */ + .ilim = 200, /* uA */ +}; + +static struct wm831x_status_pdata banff_red_led __initdata = { + .name = "banff:red:", + .default_src = WM831X_STATUS_MANUAL, +}; + +static struct wm831x_status_pdata banff_green_led __initdata = { + .name = "banff:green:", + .default_src = WM831X_STATUS_MANUAL, +}; + +static struct wm831x_touch_pdata touch_pdata __initdata = { + .data_irq = S3C_EINT(26), + .pd_irq = S3C_EINT(27), +}; + +static struct wm831x_pdata crag_pmic_pdata __initdata = { + .wm831x_num = 1, + .irq_base = BANFF_PMIC_IRQ_BASE, + .gpio_base = GPIO_BOARD_START + 8, + + .backup = &banff_backup_pdata, + + .gpio_defaults = { + /* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/ + [10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6, + /* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/ + [11] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x7, + }, + + .dcdc = { + &vddarm, /* DCDC1 */ + &vddint, /* DCDC2 */ + &vddmem, /* DCDC3 */ + }, + + .ldo = { + &vddsys, /* LDO1 */ + &vddmmc, /* LDO2 */ + NULL, /* LDO3 */ + &vddotgi, /* LDO4 */ + &vddotg, /* LDO5 */ + &vddhi, /* LDO6 */ + &vddadc, /* LDO7 */ + &vddmem0, /* LDO8 */ + &vddpll, /* LDO9 */ + &vddlcd, /* LDO10 */ + &vddalive, /* LDO11 */ + }, + + .status = { + &banff_green_led, + &banff_red_led, + }, + + .touch = &touch_pdata, +}; + +static struct i2c_board_info i2c_devs0[] __initdata = { + { I2C_BOARD_INFO("24c08", 0x50), }, + { I2C_BOARD_INFO("tca6408", 0x20), + .platform_data = &crag6410_pca_data, + }, + { I2C_BOARD_INFO("wm8312", 0x34), + .platform_data = &crag_pmic_pdata, + .irq = S3C_EINT(23), + }, +}; + +static struct s3c2410_platform_i2c i2c0_pdata = { + .frequency = 400000, +}; + +static struct regulator_init_data pvdd_1v2 __initdata = { + .constraints = { + .name = "PVDD_1V2", + .always_on = 1, + }, +}; + +static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = { + REGULATOR_SUPPLY("PLLVDD", "1-001a"), + REGULATOR_SUPPLY("DBVDD", "1-001a"), + REGULATOR_SUPPLY("CPVDD", "1-001a"), + REGULATOR_SUPPLY("AVDD2", "1-001a"), + REGULATOR_SUPPLY("DCVDD", "1-001a"), + REGULATOR_SUPPLY("AVDD", "1-001a"), +}; + +static struct regulator_init_data pvdd_1v8 __initdata = { + .constraints = { + .name = "PVDD_1V8", + .always_on = 1, + }, + + .consumer_supplies = pvdd_1v8_consumers, + .num_consumer_supplies = ARRAY_SIZE(pvdd_1v8_consumers), +}; + +static struct regulator_consumer_supply pvdd_3v3_consumers[] __initdata = { + REGULATOR_SUPPLY("MICVDD", "1-001a"), + REGULATOR_SUPPLY("AVDD1", "1-001a"), +}; + +static struct regulator_init_data pvdd_3v3 __initdata = { + .constraints = { + .name = "PVDD_3V3", + .always_on = 1, + }, + + .consumer_supplies = pvdd_3v3_consumers, + .num_consumer_supplies = ARRAY_SIZE(pvdd_3v3_consumers), +}; + +static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = { + .wm831x_num = 2, + .irq_base = GLENFARCLAS_PMIC_IRQ_BASE, + .gpio_base = GLENFARCLAS_PMIC_GPIO_BASE, + + .gpio_defaults = { + /* GPIO1-3: IRQ inputs, rising edge triggered, CMOS */ + [0] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA, + [1] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA, + [2] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA, + }, + + .dcdc = { + &pvdd_1v2, /* DCDC1 */ + &pvdd_1v8, /* DCDC2 */ + &pvdd_3v3, /* DCDC3 */ + }, + + .disable_touch = true, +}; + +static struct wm8915_retune_mobile_config wm8915_retune[] = { + { + .name = "Sub LPF", + .rate = 48000, + .regs = { + 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, + 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, + 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 + }, + }, + { + .name = "Sub HPF", + .rate = 48000, + .regs = { + 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, + 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, + 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 + }, + }, +}; + +static struct wm8915_pdata wm8915_pdata __initdata = { + .ldo_ena = S3C64XX_GPN(7), + .gpio_base = CODEC_GPIO_BASE, + .micdet_def = 1, + .inl_mode = WM8915_DIFFERRENTIAL_1, + .inr_mode = WM8915_DIFFERRENTIAL_1, + + .irq_flags = IRQF_TRIGGER_RISING, + + .gpio_default = { + 0x8001, /* GPIO1 == ADCLRCLK1 */ + 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */ + 0x0141, /* GPIO3 == HP_SEL */ + 0x0002, /* GPIO4 == IRQ */ + 0x020e, /* GPIO5 == CLKOUT */ + }, + + .retune_mobile_cfgs = wm8915_retune, + .num_retune_mobile_cfgs = ARRAY_SIZE(wm8915_retune), +}; + +static struct wm8962_pdata wm8962_pdata __initdata = { + .gpio_init = { + 0, + WM8962_GPIO_FN_OPCLK, + WM8962_GPIO_FN_DMICCLK, + 0, + 0x8000 | WM8962_GPIO_FN_DMICDAT, + WM8962_GPIO_FN_IRQ, /* Open drain mode */ + }, + .irq_active_low = true, +}; + +static struct wm9081_pdata wm9081_pdata __initdata = { + .irq_high = false, + .irq_cmos = false, +}; + +static struct i2c_board_info i2c_devs1[] __initdata = { + { I2C_BOARD_INFO("wm8311", 0x34), + .irq = S3C_EINT(0), + .platform_data = &glenfarclas_pmic_pdata }, + + { I2C_BOARD_INFO("wm1250-ev1", 0x27) }, + { I2C_BOARD_INFO("wm8915", 0x1a), + .platform_data = &wm8915_pdata, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + }, + { I2C_BOARD_INFO("wm9081", 0x6c), + .platform_data = &wm9081_pdata, }, + { I2C_BOARD_INFO("wm8962", 0x1a), + .platform_data = &wm8962_pdata, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + }, +}; + +static void __init crag6410_map_io(void) +{ + s3c64xx_init_io(NULL, 0); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs)); + + /* LCD type and Bypass set by bootloader */ +} + +static struct s3c_sdhci_platdata crag6410_hsmmc2_pdata = { + .max_width = 4, + .cd_type = S3C_SDHCI_CD_PERMANENT, +}; + +static struct s3c_sdhci_platdata crag6410_hsmmc1_pdata = { + .max_width = 4, + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = S3C64XX_GPF(11), +}; + +static void crag6410_cfg_sdhci0(struct platform_device *dev, int width) +{ + /* Set all the necessary GPG pins to special-function 2 */ + s3c_gpio_cfgrange_nopull(S3C64XX_GPG(0), 2 + width, S3C_GPIO_SFN(2)); + + /* force card-detected for prototype 0 */ + s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_DOWN); +} + +static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = { + .max_width = 4, + .cd_type = S3C_SDHCI_CD_INTERNAL, + .cfg_gpio = crag6410_cfg_sdhci0, +}; + +static void __init crag6410_machine_init(void) +{ + /* Open drain IRQs need pullups */ + s3c_gpio_setpull(S3C64XX_GPM(0), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S3C64XX_GPN(0), S3C_GPIO_PULL_UP); + + gpio_request(S3C64XX_GPB(0), "LCD power"); + gpio_direction_output(S3C64XX_GPB(0), 0); + + gpio_request(S3C64XX_GPF(14), "LCD PWM"); + gpio_direction_output(S3C64XX_GPF(14), 0); /* turn off */ + + gpio_request(S3C64XX_GPB(1), "SD power"); + gpio_direction_output(S3C64XX_GPB(1), 0); + + gpio_request(S3C64XX_GPF(10), "nRESETSEL"); + gpio_direction_output(S3C64XX_GPF(10), 1); + + s3c_sdhci0_set_platdata(&crag6410_hsmmc0_pdata); + s3c_sdhci1_set_platdata(&crag6410_hsmmc1_pdata); + s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata); + + s3c_i2c0_set_platdata(&i2c0_pdata); + s3c_i2c1_set_platdata(NULL); + s3c_fb_set_platdata(&crag6410_lcd_pdata); + + i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); + i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); + + samsung_keypad_set_platdata(&crag6410_keypad_data); + + platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices)); + + regulator_has_full_constraints(); + + s3c_pm_init(); +} + +MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410") + /* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */ + .boot_params = S3C64XX_PA_SDRAM + 0x100, + .init_irq = s3c6410_init_irq, + .map_io = crag6410_map_io, + .init_machine = crag6410_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h index 2b1d9bc1eebb..9fe6c8783236 100644 --- a/arch/arm/plat-omap/include/plat/omap4-keypad.h +++ b/arch/arm/plat-omap/include/plat/omap4-keypad.h @@ -10,5 +10,6 @@ struct omap4_keypad_platform_data { u8 cols; }; -extern int omap4_keyboard_init(struct omap4_keypad_platform_data *); +extern int omap4_keyboard_init(struct omap4_keypad_platform_data *, + struct omap_board_data *); #endif diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index ac4b60d9aa29..a067484cc4a2 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -148,6 +148,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id) /* omap3 based boards using UART3 */ DEBUG_LL_OMAP3(3, cm_t35); DEBUG_LL_OMAP3(3, cm_t3517); + DEBUG_LL_OMAP3(3, cm_t3730); DEBUG_LL_OMAP3(3, craneboard); DEBUG_LL_OMAP3(3, devkit8000); DEBUG_LL_OMAP3(3, igep0020); |
