summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/Kconfig.debug10
-rw-r--r--arch/arm/Makefile1
-rw-r--r--arch/arm/boot/dts/bcm11351.dtsi2
-rw-r--r--arch/arm/boot/dts/bcm21664.dtsi2
-rw-r--r--arch/arm/boot/dts/bcm4708.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos3250.dtsi14
-rw-r--r--arch/arm/boot/dts/exynos4.dtsi14
-rw-r--r--arch/arm/boot/dts/exynos5.dtsi14
-rw-r--r--arch/arm/boot/dts/exynos5410.dtsi14
-rw-r--r--arch/arm/mach-bcm/Kconfig16
-rw-r--r--arch/arm/mach-bcm/Makefile11
-rw-r--r--arch/arm/mach-bcm/bcm_5301x.c35
-rw-r--r--arch/arm/mach-bcm/board_bcm2835.c5
-rw-r--r--arch/arm/mach-bcm/platsmp.c (renamed from arch/arm/mach-bcm/kona_smp.c)144
-rw-r--r--arch/arm/mach-exynos/Kconfig3
-rw-r--r--arch/arm/mach-exynos/pmu.c45
-rw-r--r--arch/arm/mach-exynos/regs-pmu.h9
-rw-r--r--arch/arm/mach-imx/Kconfig1
-rw-r--r--arch/arm/mach-imx/iomux-imx31.c2
-rw-r--r--arch/arm/mach-imx/mach-imx6ul.c2
-rw-r--r--arch/arm/mach-imx/mach-imx7d.c6
-rw-r--r--arch/arm/mach-omap1/devices.c19
-rw-r--r--arch/arm/mach-omap2/Makefile2
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c2
-rw-r--r--arch/arm/mach-omap2/clockdomains81xx_data.c29
-rw-r--r--arch/arm/mach-omap2/cm81xx.h6
-rw-r--r--arch/arm/mach-omap2/devices.c25
-rw-r--r--arch/arm/mach-omap2/id.c4
-rw-r--r--arch/arm/mach-omap2/omap-iommu.c66
-rw-r--r--arch/arm/mach-omap2/omap2-restart.c2
-rw-r--r--arch/arm/mach-omap2/omap_device.c2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_3xxx_data.c42
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c41
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_7xx_data.c2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_81xx_data.c166
-rw-r--r--arch/arm/mach-omap2/pdata-quirks.c2
-rw-r--r--arch/arm/mach-omap2/powerdomains3xxx_data.c10
-rw-r--r--arch/arm/mach-omap2/serial.c2
-rw-r--r--arch/arm/mach-omap2/timer.c6
-rw-r--r--arch/arm/mach-rockchip/platsmp.c45
-rw-r--r--arch/arm/mach-rockchip/rockchip.c1
-rw-r--r--arch/arm/mach-tango/Kconfig12
-rw-r--r--arch/arm/mach-tango/Makefile5
-rw-r--r--arch/arm/mach-tango/platsmp.c16
-rw-r--r--arch/arm/mach-tango/setup.c17
-rw-r--r--arch/arm/mach-tango/smc.S9
-rw-r--r--arch/arm/mach-tango/smc.h5
-rw-r--r--arch/arm/mach-uniphier/Kconfig1
-rw-r--r--arch/arm/mach-zynq/Kconfig1
-rw-r--r--arch/arm/plat-omap/dmtimer.c42
52 files changed, 556 insertions, 382 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 915c10a891ce..37c7951ca4f5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -831,6 +831,8 @@ source "arch/arm/mach-sunxi/Kconfig"
source "arch/arm/mach-prima2/Kconfig"
+source "arch/arm/mach-tango/Kconfig"
+
source "arch/arm/mach-tegra/Kconfig"
source "arch/arm/mach-u300/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9bb33ab0608d..5c0e5cc8ed10 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -129,7 +129,12 @@ choice
config DEBUG_BCM2835
bool "Kernel low-level debugging on BCM2835 PL011 UART"
- depends on ARCH_BCM2835
+ depends on ARCH_BCM2835 && ARCH_MULTI_V6
+ select DEBUG_UART_PL01X
+
+ config DEBUG_BCM2836
+ bool "Kernel low-level debugging on BCM2836 PL011 UART"
+ depends on ARCH_BCM2835 && ARCH_MULTI_V7
select DEBUG_UART_PL01X
config DEBUG_BCM_5301X
@@ -1461,6 +1466,7 @@ config DEBUG_UART_PHYS
default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
default 0x20201000 if DEBUG_BCM2835
+ default 0x3f201000 if DEBUG_BCM2836
default 0x3e000000 if DEBUG_BCM_KONA_UART
default 0x4000e400 if DEBUG_LL_UART_EFM32
default 0x40081000 if DEBUG_LPC18XX_UART0
@@ -1547,7 +1553,7 @@ config DEBUG_UART_VIRT
default 0xf0000be0 if ARCH_EBSA110
default 0xf0010000 if DEBUG_ASM9260_UART
default 0xf01fb000 if DEBUG_NOMADIK_UART
- default 0xf0201000 if DEBUG_BCM2835
+ default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836
default 0xf1000300 if DEBUG_BCM_5301X
default 0xf1002000 if DEBUG_MT8127_UART0
default 0xf1006000 if DEBUG_MT6589_UART0
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 2c2b28ee4811..d1da24885af0 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -211,6 +211,7 @@ machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
machine-$(CONFIG_ARCH_STI) += sti
machine-$(CONFIG_ARCH_STM32) += stm32
machine-$(CONFIG_ARCH_SUNXI) += sunxi
+machine-$(CONFIG_ARCH_TANGO) += tango
machine-$(CONFIG_ARCH_TEGRA) += tegra
machine-$(CONFIG_ARCH_U300) += u300
machine-$(CONFIG_ARCH_U8500) += ux500
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index 2ddaa5136611..3dc7a8cc5812 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -31,7 +31,6 @@
#address-cells = <1>;
#size-cells = <0>;
enable-method = "brcm,bcm11351-cpu-method";
- secondary-boot-reg = <0x3500417c>;
cpu0: cpu@0 {
device_type = "cpu";
@@ -42,6 +41,7 @@
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
+ secondary-boot-reg = <0x3500417c>;
reg = <1>;
};
};
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
index 2016b72a8fb7..3f525be28fd0 100644
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ b/arch/arm/boot/dts/bcm21664.dtsi
@@ -31,7 +31,6 @@
#address-cells = <1>;
#size-cells = <0>;
enable-method = "brcm,bcm11351-cpu-method";
- secondary-boot-reg = <0x35004178>;
cpu0: cpu@0 {
device_type = "cpu";
@@ -42,6 +41,7 @@
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
+ secondary-boot-reg = <0x35004178>;
reg = <1>;
};
};
diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi
index 31141e83fedd..eed4dd159995 100644
--- a/arch/arm/boot/dts/bcm4708.dtsi
+++ b/arch/arm/boot/dts/bcm4708.dtsi
@@ -15,6 +15,7 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "brcm,bcm-nsp-smp";
cpu@0 {
device_type = "cpu";
@@ -27,6 +28,7 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
+ secondary-boot-reg = <0xffff0400>;
reg = <0x1>;
};
};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 2f30d632f1cc..18e3deffbf48 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -152,6 +152,20 @@
interrupt-parent = <&gic>;
};
+ poweroff: syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmu_system_controller>;
+ offset = <0x330C>; /* PS_HOLD_CONTROL */
+ mask = <0x5200>; /* Reset value */
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x0400>; /* SWRESET */
+ mask = <0x1>;
+ };
+
mipi_phy: video-phy@10020710 {
compatible = "samsung,s5pv210-mipi-video-phy";
#phy-cells = <1>;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 3184e10f260a..07e10ee60bd8 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -158,6 +158,20 @@
interrupt-parent = <&gic>;
};
+ poweroff: syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmu_system_controller>;
+ offset = <0x330C>; /* PS_HOLD_CONTROL */
+ mask = <0x5200>; /* reset value */
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x0400>; /* SWRESET */
+ mask = <0x1>;
+ };
+
dsi_0: dsi@11C80000 {
compatible = "samsung,exynos4210-mipi-dsi";
reg = <0x11C80000 0x10000>;
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 110dbd4fb884..e2439e87ee4a 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -88,6 +88,20 @@
status = "disabled";
};
+ poweroff: syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmu_system_controller>;
+ offset = <0x330C>; /* PS_HOLD_CONTROL */
+ mask = <0x5200>; /* reset value */
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x0400>; /* SWRESET */
+ mask = <0x1>;
+ };
+
fimd: fimd@14400000 {
compatible = "samsung,exynos5250-fimd";
interrupt-parent = <&combiner>;
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 731eefd23fa9..fad0779b1b6e 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -102,6 +102,20 @@
reg = <0x10040000 0x5000>;
};
+ poweroff: syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmu_system_controller>;
+ offset = <0x330C>; /* PS_HOLD_CONTROL */
+ mask = <0x5200>; /* reset value */
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x0400>; /* SWRESET */
+ mask = <0x1>;
+ };
+
mct: mct@101C0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0xB00>;
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 77116dcac01a..7ef121472cdd 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -43,6 +43,8 @@ config ARCH_BCM_NSP
select ARCH_BCM_IPROC
select ARM_ERRATA_754322
select ARM_ERRATA_775420
+ select ARM_ERRATA_764369 if SMP
+ select HAVE_SMP
help
Support for Broadcom Northstar Plus SoC.
Broadcom Northstar Plus family of SoCs are used for switching control
@@ -56,6 +58,11 @@ config ARCH_BCM_5301X
bool "Broadcom BCM470X / BCM5301X ARM SoC"
depends on ARCH_MULTI_V7
select ARCH_BCM_IPROC
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_775420
+ select ARM_ERRATA_764369 if SMP
+ select HAVE_SMP
+
help
Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
@@ -129,17 +136,18 @@ comment "Other Architectures"
config ARCH_BCM2835
bool "Broadcom BCM2835 family"
- depends on ARCH_MULTI_V6
+ depends on ARCH_MULTI_V6 || ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
- select ARM_ERRATA_411920
+ select ARM_ERRATA_411920 if ARCH_MULTI_V6
select ARM_TIMER_SP804
+ select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
select CLKSRC_OF
select PINCTRL
select PINCTRL_BCM2835
help
- This enables support for the Broadcom BCM2835 SoC. This SoC is
- used in the Raspberry Pi and Roku 2 devices.
+ This enables support for the Broadcom BCM2835 and BCM2836 SoCs.
+ This SoC is used in the Raspberry Pi and Roku 2 devices.
config ARCH_BCM_63XX
bool "Broadcom BCM63xx DSL SoC"
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index 892261fec0ae..7d665151c772 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -14,7 +14,11 @@
obj-$(CONFIG_ARCH_BCM_CYGNUS) += bcm_cygnus.o
# Northstar Plus
-obj-$(CONFIG_ARCH_BCM_NSP) += bcm_nsp.o
+obj-$(CONFIG_ARCH_BCM_NSP) += bcm_nsp.o
+
+ifeq ($(CONFIG_ARCH_BCM_NSP),y)
+obj-$(CONFIG_SMP) += platsmp.o
+endif
# BCM281XX
obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o
@@ -23,7 +27,7 @@ obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o
obj-$(CONFIG_ARCH_BCM_21664) += board_bcm21664.o
# BCM281XX and BCM21664 SMP support
-obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += kona_smp.o
+obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += platsmp.o
# BCM281XX and BCM21664 L2 cache control
obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
@@ -39,6 +43,9 @@ obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o
# BCM5301X
obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o
+ifeq ($(CONFIG_ARCH_BCM_5301X),y)
+obj-$(CONFIG_SMP) += platsmp.o
+endif
# BCM63XXx
ifeq ($(CONFIG_ARCH_BCM_63XX),y)
diff --git a/arch/arm/mach-bcm/bcm_5301x.c b/arch/arm/mach-bcm/bcm_5301x.c
index 5478fe6bcce6..c8830a2b0d60 100644
--- a/arch/arm/mach-bcm/bcm_5301x.c
+++ b/arch/arm/mach-bcm/bcm_5301x.c
@@ -9,40 +9,6 @@
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
-#include <asm/siginfo.h>
-#include <asm/signal.h>
-
-
-static bool first_fault = true;
-
-static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
- struct pt_regs *regs)
-{
- if ((fsr == 0x1406 || fsr == 0x1c06) && first_fault) {
- first_fault = false;
-
- /*
- * These faults with codes 0x1406 (BCM4709) or 0x1c06 happens
- * for no good reason, possibly left over from the CFE boot
- * loader.
- */
- pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
- addr, fsr);
-
- /* Returning non-zero causes fault display and panic */
- return 0;
- }
-
- /* Others should cause a fault */
- return 1;
-}
-
-static void __init bcm5301x_init_early(void)
-{
- /* Install our hook */
- hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR,
- "imprecise external abort");
-}
static const char *const bcm5301x_dt_compat[] __initconst = {
"brcm,bcm4708",
@@ -52,6 +18,5 @@ static const char *const bcm5301x_dt_compat[] __initconst = {
DT_MACHINE_START(BCM5301X, "BCM5301X")
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
- .init_early = bcm5301x_init_early,
.dt_compat = bcm5301x_dt_compat,
MACHINE_END
diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c
index 0f7b9eac3d15..834d67684e20 100644
--- a/arch/arm/mach-bcm/board_bcm2835.c
+++ b/arch/arm/mach-bcm/board_bcm2835.c
@@ -36,7 +36,12 @@ static void __init bcm2835_init(void)
}
static const char * const bcm2835_compat[] = {
+#ifdef CONFIG_ARCH_MULTI_V6
"brcm,bcm2835",
+#endif
+#ifdef CONFIG_ARCH_MULTI_V7
+ "brcm,bcm2836",
+#endif
NULL
};
diff --git a/arch/arm/mach-bcm/kona_smp.c b/arch/arm/mach-bcm/platsmp.c
index da8328b97b7d..575defcc53f9 100644
--- a/arch/arm/mach-bcm/kona_smp.c
+++ b/arch/arm/mach-bcm/platsmp.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2014 Broadcom Corporation
+ * Copyright (C) 2014-2015 Broadcom Corporation
* Copyright 2014 Linaro Limited
*
* This program is free software; you can redistribute it and/or
@@ -12,12 +12,17 @@
* GNU General Public License for more details.
*/
-#include <linux/init.h>
+#include <linux/cpumask.h>
+#include <linux/delay.h>
#include <linux/errno.h>
+#include <linux/init.h>
#include <linux/io.h>
+#include <linux/jiffies.h>
#include <linux/of.h>
#include <linux/sched.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
#include <asm/smp.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
@@ -30,9 +35,10 @@
/* Name of device node property defining secondary boot register location */
#define OF_SECONDARY_BOOT "secondary-boot-reg"
+#define MPIDR_CPUID_BITMASK 0x3
/* I/O address of register used to coordinate secondary core startup */
-static u32 secondary_boot;
+static u32 secondary_boot_addr;
/*
* Enable the Cortex A9 Snoop Control Unit
@@ -75,47 +81,101 @@ static int __init scu_a9_enable(void)
return 0;
}
+static int nsp_write_lut(void)
+{
+ void __iomem *sku_rom_lut;
+ phys_addr_t secondary_startup_phy;
+
+ if (!secondary_boot_addr) {
+ pr_warn("required secondary boot register not specified\n");
+ return -EINVAL;
+ }
+
+ sku_rom_lut = ioremap_nocache((phys_addr_t)secondary_boot_addr,
+ sizeof(secondary_boot_addr));
+ if (!sku_rom_lut) {
+ pr_warn("unable to ioremap SKU-ROM LUT register\n");
+ return -ENOMEM;
+ }
+
+ secondary_startup_phy = virt_to_phys(secondary_startup);
+ BUG_ON(secondary_startup_phy > (phys_addr_t)U32_MAX);
+
+ writel_relaxed(secondary_startup_phy, sku_rom_lut);
+
+ /* Ensure the write is visible to the secondary core */
+ smp_wmb();
+
+ iounmap(sku_rom_lut);
+
+ return 0;
+}
+
static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
{
static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
- struct device_node *node;
+ struct device_node *cpus_node = NULL;
+ struct device_node *cpu_node = NULL;
int ret;
- BUG_ON(secondary_boot); /* We're called only once */
-
/*
* This function is only called via smp_ops->smp_prepare_cpu().
* That only happens if a "/cpus" device tree node exists
* and has an "enable-method" property that selects the SMP
* operations defined herein.
*/
- node = of_find_node_by_path("/cpus");
- BUG_ON(!node);
+ cpus_node = of_find_node_by_path("/cpus");
+ if (!cpus_node)
+ return;
- /*
- * Our secondary enable method requires a "secondary-boot-reg"
- * property to specify a register address used to request the
- * ROM code boot a secondary code. If we have any trouble
- * getting this we fall back to uniprocessor mode.
- */
- if (of_property_read_u32(node, OF_SECONDARY_BOOT, &secondary_boot)) {
- pr_err("%s: missing/invalid " OF_SECONDARY_BOOT " property\n",
- node->name);
- ret = -ENOENT; /* Arrange to disable SMP */
- goto out;
+ for_each_child_of_node(cpus_node, cpu_node) {
+ u32 cpuid;
+
+ if (of_node_cmp(cpu_node->type, "cpu"))
+ continue;
+
+ if (of_property_read_u32(cpu_node, "reg", &cpuid)) {
+ pr_debug("%s: missing reg property\n",
+ cpu_node->full_name);
+ ret = -ENOENT;
+ goto out;
+ }
+
+ /*
+ * "secondary-boot-reg" property should be defined only
+ * for secondary cpu
+ */
+ if ((cpuid & MPIDR_CPUID_BITMASK) == 1) {
+ /*
+ * Our secondary enable method requires a
+ * "secondary-boot-reg" property to specify a register
+ * address used to request the ROM code boot a secondary
+ * core. If we have any trouble getting this we fall
+ * back to uniprocessor mode.
+ */
+ if (of_property_read_u32(cpu_node,
+ OF_SECONDARY_BOOT,
+ &secondary_boot_addr)) {
+ pr_warn("%s: no" OF_SECONDARY_BOOT "property\n",
+ cpu_node->name);
+ ret = -ENOENT;
+ goto out;
+ }
+ }
}
/*
- * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is
+ * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is
* returned, the SoC reported a uniprocessor configuration.
* We bail on any other error.
*/
ret = scu_a9_enable();
out:
- of_node_put(node);
+ of_node_put(cpu_node);
+ of_node_put(cpus_node);
+
if (ret) {
/* Update the CPU present map to reflect uniprocessor mode */
- BUG_ON(ret != -ENOENT);
pr_warn("disabling SMP\n");
init_cpu_present(&only_cpu_0);
}
@@ -139,7 +199,7 @@ out:
* - Wait for the secondary boot register to be re-written, which
* indicates the secondary core has started.
*/
-static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
void __iomem *boot_reg;
phys_addr_t boot_func;
@@ -154,15 +214,16 @@ static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
return -EINVAL;
}
- if (!secondary_boot) {
+ if (!secondary_boot_addr) {
pr_err("required secondary boot register not specified\n");
return -EINVAL;
}
- boot_reg = ioremap_nocache((phys_addr_t)secondary_boot, sizeof(u32));
+ boot_reg = ioremap_nocache(
+ (phys_addr_t)secondary_boot_addr, sizeof(u32));
if (!boot_reg) {
pr_err("unable to map boot register for cpu %u\n", cpu_id);
- return -ENOSYS;
+ return -ENOMEM;
}
/*
@@ -191,12 +252,39 @@ static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
pr_err("timeout waiting for cpu %u to start\n", cpu_id);
- return -ENOSYS;
+ return -ENXIO;
+}
+
+static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ int ret;
+
+ /*
+ * After wake up, secondary core branches to the startup
+ * address programmed at SKU ROM LUT location.
+ */
+ ret = nsp_write_lut();
+ if (ret) {
+ pr_err("unable to write startup addr to SKU ROM LUT\n");
+ goto out;
+ }
+
+ /* Send a CPU wakeup interrupt to the secondary core */
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+out:
+ return ret;
}
static const struct smp_operations bcm_smp_ops __initconst = {
.smp_prepare_cpus = bcm_smp_prepare_cpus,
- .smp_boot_secondary = bcm_boot_secondary,
+ .smp_boot_secondary = kona_boot_secondary,
};
CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
&bcm_smp_ops);
+
+struct smp_operations nsp_smp_ops __initdata = {
+ .smp_prepare_cpus = bcm_smp_prepare_cpus,
+ .smp_boot_secondary = nsp_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(bcm_smp_nsp, "brcm,bcm-nsp-smp", &nsp_smp_ops);
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 05c83fca1f81..652a0bb11578 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -29,6 +29,9 @@ menuconfig ARCH_EXYNOS
select THERMAL
select MFD_SYSCON
select CLKSRC_EXYNOS_MCT
+ select POWER_RESET
+ select POWER_RESET_SYSCON
+ select POWER_RESET_SYSCON_POWEROFF
help
Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5)
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index c21e41dad19c..dbf9fe98d479 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -14,9 +14,8 @@
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
+#include <asm/cputype.h>
#include "exynos-pmu.h"
#include "regs-pmu.h"
@@ -681,23 +680,6 @@ static unsigned int const exynos5420_list_disable_pmu_reg[] = {
EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG,
};
-static void exynos_power_off(void)
-{
- unsigned int tmp;
-
- pr_info("Power down.\n");
- tmp = pmu_raw_readl(EXYNOS_PS_HOLD_CONTROL);
- tmp ^= (1 << 8);
- pmu_raw_writel(tmp, EXYNOS_PS_HOLD_CONTROL);
-
- /* Wait a little so we don't give a false warning below */
- mdelay(100);
-
- pr_err("Power down failed, please power off system manually.\n");
- while (1)
- ;
-}
-
static void exynos5420_powerdown_conf(enum sys_powerdown mode)
{
u32 this_cluster;
@@ -879,14 +861,6 @@ static void exynos5420_pmu_init(void)
pr_info("EXYNOS5420 PMU initialized\n");
}
-static int pmu_restart_notify(struct notifier_block *this,
- unsigned long code, void *unused)
-{
- pmu_raw_writel(0x1, EXYNOS_SWRESET);
-
- return NOTIFY_DONE;
-}
-
static const struct exynos_pmu_data exynos3250_pmu_data = {
.pmu_config = exynos3250_pmu_config,
.pmu_init = exynos3250_pmu_init,
@@ -912,7 +886,7 @@ static const struct exynos_pmu_data exynos5250_pmu_data = {
.powerdown_conf = exynos5_powerdown_conf,
};
-static struct exynos_pmu_data exynos5420_pmu_data = {
+static const struct exynos_pmu_data exynos5420_pmu_data = {
.pmu_config = exynos5420_pmu_config,
.pmu_init = exynos5420_pmu_init,
.powerdown_conf = exynos5420_powerdown_conf,
@@ -944,20 +918,11 @@ static const struct of_device_id exynos_pmu_of_device_ids[] = {
{ /*sentinel*/ },
};
-/*
- * Exynos PMU restart notifier, handles restart functionality
- */
-static struct notifier_block pmu_restart_handler = {
- .notifier_call = pmu_restart_notify,
- .priority = 128,
-};
-
static int exynos_pmu_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
struct device *dev = &pdev->dev;
struct resource *res;
- int ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pmu_base_addr = devm_ioremap_resource(dev, res);
@@ -982,12 +947,6 @@ static int exynos_pmu_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pmu_context);
- ret = register_restart_handler(&pmu_restart_handler);
- if (ret)
- dev_warn(dev, "can't register restart handler err=%d\n", ret);
-
- pm_power_off = exynos_power_off;
-
dev_dbg(dev, "Exynos PMU Driver probe done\n");
return 0;
}
diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h
index fba9068ed260..5e4f4c23b06a 100644
--- a/arch/arm/mach-exynos/regs-pmu.h
+++ b/arch/arm/mach-exynos/regs-pmu.h
@@ -484,15 +484,6 @@
#define EXYNOS5420_SWRESET_KFC_SEL 0x3
-#include <asm/cputype.h>
-#define MAX_CPUS_IN_CLUSTER 4
-
-static inline unsigned int exynos_pmu_cpunr(unsigned int mpidr)
-{
- return ((MPIDR_AFFINITY_LEVEL(mpidr, 1) * MAX_CPUS_IN_CLUSTER)
- + MPIDR_AFFINITY_LEVEL(mpidr, 0));
-}
-
/* Only for EXYNOS5420 */
#define EXYNOS5420_ISP_ARM_OPTION 0x2488
#define EXYNOS5420_L2RSTDISABLE_VALUE BIT(3)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 0ac180f7b330..15df34fbdf44 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -563,6 +563,7 @@ config SOC_IMX7D
select ARM_GIC
select HAVE_IMX_ANATOP
select HAVE_IMX_MMDC
+ select HAVE_IMX_SRC
help
This enables support for Freescale i.MX7 Dual processor.
diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c
index 6dd22cabf4d3..0b5ba4bf572a 100644
--- a/arch/arm/mach-imx/iomux-imx31.c
+++ b/arch/arm/mach-imx/iomux-imx31.c
@@ -100,7 +100,7 @@ int mxc_iomux_alloc_pin(unsigned int pin, const char *label)
unsigned pad = pin & IOMUX_PADNUM_MASK;
if (pad >= (PIN_MAX + 1)) {
- printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
+ printk(KERN_ERR "mxc_iomux: Attempt to request nonexistent pin %u for \"%s\"\n",
pad, label ? label : "?");
return -EINVAL;
}
diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
index acaf7056efa5..a38b16b69923 100644
--- a/arch/arm/mach-imx/mach-imx6ul.c
+++ b/arch/arm/mach-imx/mach-imx6ul.c
@@ -84,7 +84,7 @@ static void __init imx6ul_init_late(void)
platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
}
-static const char *imx6ul_dt_compat[] __initconst = {
+static const char * const imx6ul_dt_compat[] __initconst = {
"fsl,imx6ul",
NULL,
};
diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c
index b450f525a670..5a27f20c9a82 100644
--- a/arch/arm/mach-imx/mach-imx7d.c
+++ b/arch/arm/mach-imx/mach-imx7d.c
@@ -105,6 +105,11 @@ static void __init imx7d_init_irq(void)
irqchip_init();
}
+static void __init imx7d_init_late(void)
+{
+ platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+}
+
static const char *const imx7d_dt_compat[] __initconst = {
"fsl,imx7d",
NULL,
@@ -112,6 +117,7 @@ static const char *const imx7d_dt_compat[] __initconst = {
DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual (Device Tree)")
.init_irq = imx7d_init_irq,
+ .init_late = imx7d_init_late,
.init_machine = imx7d_init_machine,
.dt_compat = imx7d_dt_compat,
MACHINE_END
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 263c07a566cb..8c8be861fff2 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -33,24 +33,6 @@
#include "mmc.h"
#include "sram.h"
-#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
-
-static struct platform_device omap_pcm = {
- .name = "omap-pcm-audio",
- .id = -1,
-};
-
-static void omap_init_audio(void)
-{
- platform_device_register(&omap_pcm);
-}
-
-#else
-static inline void omap_init_audio(void) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
#if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
#define OMAP_RTC_BASE 0xfffb4800
@@ -425,7 +407,6 @@ static int __init omap1_init_devices(void)
* in alphabetical order so they're easier to sort through.
*/
- omap_init_audio();
omap_init_mbox();
omap_init_rtc();
omap_init_spi100k();
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index ceefcee6bb85..0ba6a0e6fa19 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -223,8 +223,6 @@ obj-$(CONFIG_SOC_DRA7XX) += omap_hwmod_7xx_data.o
# EMU peripherals
obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o
-obj-$(CONFIG_OMAP_IOMMU) += omap-iommu.o
-
# OMAP2420 MSDI controller integration support ("MMC")
obj-$(CONFIG_SOC_OMAP2420) += msdi.o
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 0a0567f8e8a0..da174c0d603b 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -1257,7 +1257,7 @@ static struct platform_device omap3_rom_rng_device = {
static void __init rx51_init_omap3_rom_rng(void)
{
if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
- pr_info("RX-51: Registring OMAP3 HWRNG device\n");
+ pr_info("RX-51: Registering OMAP3 HWRNG device\n");
platform_device_register(&omap3_rom_rng_device);
}
}
diff --git a/arch/arm/mach-omap2/clockdomains81xx_data.c b/arch/arm/mach-omap2/clockdomains81xx_data.c
index 53442c86a820..3b5fb05ae701 100644
--- a/arch/arm/mach-omap2/clockdomains81xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains81xx_data.c
@@ -83,6 +83,14 @@ static struct clockdomain mmu_cfg_81xx_clkdm = {
.flags = CLKDM_CAN_SWSUP,
};
+static struct clockdomain default_l3_slow_81xx_clkdm = {
+ .name = "default_l3_slow_clkdm",
+ .pwrdm = { .name = "default_pwrdm" },
+ .cm_inst = TI81XX_CM_DEFAULT_MOD,
+ .clkdm_offs = TI816X_CM_DEFAULT_L3_SLOW_CLKDM,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
/* 816x only */
static struct clockdomain alwon_mpu_816x_clkdm = {
@@ -96,7 +104,7 @@ static struct clockdomain alwon_mpu_816x_clkdm = {
static struct clockdomain active_gem_816x_clkdm = {
.name = "active_gem_clkdm",
.pwrdm = { .name = "active_pwrdm" },
- .cm_inst = TI816X_CM_ACTIVE_MOD,
+ .cm_inst = TI81XX_CM_ACTIVE_MOD,
.clkdm_offs = TI816X_CM_ACTIVE_GEM_CLKDM,
.flags = CLKDM_CAN_SWSUP,
};
@@ -128,7 +136,7 @@ static struct clockdomain ivahd2_816x_clkdm = {
static struct clockdomain sgx_816x_clkdm = {
.name = "sgx_clkdm",
.pwrdm = { .name = "sgx_pwrdm" },
- .cm_inst = TI816X_CM_SGX_MOD,
+ .cm_inst = TI81XX_CM_SGX_MOD,
.clkdm_offs = TI816X_CM_SGX_CLKDM,
.flags = CLKDM_CAN_SWSUP,
};
@@ -136,7 +144,7 @@ static struct clockdomain sgx_816x_clkdm = {
static struct clockdomain default_l3_med_816x_clkdm = {
.name = "default_l3_med_clkdm",
.pwrdm = { .name = "default_pwrdm" },
- .cm_inst = TI816X_CM_DEFAULT_MOD,
+ .cm_inst = TI81XX_CM_DEFAULT_MOD,
.clkdm_offs = TI816X_CM_DEFAULT_L3_MED_CLKDM,
.flags = CLKDM_CAN_SWSUP,
};
@@ -144,7 +152,7 @@ static struct clockdomain default_l3_med_816x_clkdm = {
static struct clockdomain default_ducati_816x_clkdm = {
.name = "default_ducati_clkdm",
.pwrdm = { .name = "default_pwrdm" },
- .cm_inst = TI816X_CM_DEFAULT_MOD,
+ .cm_inst = TI81XX_CM_DEFAULT_MOD,
.clkdm_offs = TI816X_CM_DEFAULT_DUCATI_CLKDM,
.flags = CLKDM_CAN_SWSUP,
};
@@ -152,19 +160,11 @@ static struct clockdomain default_ducati_816x_clkdm = {
static struct clockdomain default_pci_816x_clkdm = {
.name = "default_pci_clkdm",
.pwrdm = { .name = "default_pwrdm" },
- .cm_inst = TI816X_CM_DEFAULT_MOD,
+ .cm_inst = TI81XX_CM_DEFAULT_MOD,
.clkdm_offs = TI816X_CM_DEFAULT_PCI_CLKDM,
.flags = CLKDM_CAN_SWSUP,
};
-static struct clockdomain default_l3_slow_816x_clkdm = {
- .name = "default_l3_slow_clkdm",
- .pwrdm = { .name = "default_pwrdm" },
- .cm_inst = TI816X_CM_DEFAULT_MOD,
- .clkdm_offs = TI816X_CM_DEFAULT_L3_SLOW_CLKDM,
- .flags = CLKDM_CAN_SWSUP,
-};
-
static struct clockdomain *clockdomains_ti814x[] __initdata = {
&alwon_l3_slow_81xx_clkdm,
&alwon_l3_med_81xx_clkdm,
@@ -172,6 +172,7 @@ static struct clockdomain *clockdomains_ti814x[] __initdata = {
&alwon_ethernet_81xx_clkdm,
&mmu_81xx_clkdm,
&mmu_cfg_81xx_clkdm,
+ &default_l3_slow_81xx_clkdm,
NULL,
};
@@ -198,7 +199,7 @@ static struct clockdomain *clockdomains_ti816x[] __initdata = {
&default_l3_med_816x_clkdm,
&default_ducati_816x_clkdm,
&default_pci_816x_clkdm,
- &default_l3_slow_816x_clkdm,
+ &default_l3_slow_81xx_clkdm,
NULL,
};
diff --git a/arch/arm/mach-omap2/cm81xx.h b/arch/arm/mach-omap2/cm81xx.h
index 45cb407da222..3a0ccf07c76f 100644
--- a/arch/arm/mach-omap2/cm81xx.h
+++ b/arch/arm/mach-omap2/cm81xx.h
@@ -18,15 +18,15 @@
#define __ARCH_ARM_MACH_OMAP2_CM_TI81XX_H
/* TI81XX common CM module offsets */
+#define TI81XX_CM_ACTIVE_MOD 0x0400 /* 256B */
+#define TI81XX_CM_DEFAULT_MOD 0x0500 /* 256B */
#define TI81XX_CM_ALWON_MOD 0x1400 /* 1KB */
+#define TI81XX_CM_SGX_MOD 0x0900 /* 256B */
/* TI816X CM module offsets */
-#define TI816X_CM_ACTIVE_MOD 0x0400 /* 256B */
-#define TI816X_CM_DEFAULT_MOD 0x0500 /* 256B */
#define TI816X_CM_IVAHD0_MOD 0x0600 /* 256B */
#define TI816X_CM_IVAHD1_MOD 0x0700 /* 256B */
#define TI816X_CM_IVAHD2_MOD 0x0800 /* 256B */
-#define TI816X_CM_SGX_MOD 0x0900 /* 256B */
/* ALWON */
#define TI81XX_CM_ALWON_L3_SLOW_CLKDM 0x0000
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 9374da313e8e..9cda974a3009 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -94,22 +94,6 @@ static inline void omap_init_mbox(void) { }
static inline void omap_init_sti(void) {}
-#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
-
-static struct platform_device omap_pcm = {
- .name = "omap-pcm-audio",
- .id = -1,
-};
-
-static void omap_init_audio(void)
-{
- platform_device_register(&omap_pcm);
-}
-
-#else
-static inline void omap_init_audio(void) {}
-#endif
-
#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
#include <linux/platform_data/spi-omap2-mcspi.h>
@@ -239,13 +223,12 @@ static int __init omap2_init_devices(void)
if (!of_have_populated_dt())
pinctrl_provide_dummies();
- /*
- * please keep these calls, and their implementations above,
- * in alphabetical order so they're easier to sort through.
- */
- omap_init_audio();
/* If dtb is there, the devices will be created dynamically */
if (!of_have_populated_dt()) {
+ /*
+ * please keep these calls, and their implementations above,
+ * in alphabetical order so they're easier to sort through.
+ */
omap_init_mbox();
omap_init_mcspi();
omap_init_sham();
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 8a2ae82cb227..d85c24918c17 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -488,6 +488,7 @@ void __init omap3xxx_check_revision(void)
}
break;
case 0xb8f2:
+ case 0xb968:
switch (rev) {
case 0:
/* FALLTHROUGH */
@@ -511,7 +512,8 @@ void __init omap3xxx_check_revision(void)
/* Unknown default to latest silicon rev as default */
omap_revision = OMAP3630_REV_ES1_2;
cpu_rev = "1.2";
- pr_warn("Warning: unknown chip type; assuming OMAP3630ES1.2\n");
+ pr_warn("Warning: unknown chip type: hawkeye %04x, assuming OMAP3630ES1.2\n",
+ hawkeye);
}
sprintf(soc_rev, "ES%s", cpu_rev);
}
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
deleted file mode 100644
index 8867eb4025bf..000000000000
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * omap iommu: omap device registration
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-
-#include <linux/platform_data/iommu-omap.h>
-#include "soc.h"
-#include "omap_hwmod.h"
-#include "omap_device.h"
-
-static int __init omap_iommu_dev_init(struct omap_hwmod *oh, void *unused)
-{
- struct platform_device *pdev;
- struct iommu_platform_data *pdata;
- struct omap_mmu_dev_attr *a = (struct omap_mmu_dev_attr *)oh->dev_attr;
- static int i;
-
- pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return -ENOMEM;
-
- pdata->name = oh->name;
- pdata->nr_tlb_entries = a->nr_tlb_entries;
-
- if (oh->rst_lines_cnt == 1) {
- pdata->reset_name = oh->rst_lines->name;
- pdata->assert_reset = omap_device_assert_hardreset;
- pdata->deassert_reset = omap_device_deassert_hardreset;
- }
-
- pdev = omap_device_build("omap-iommu", i, oh, pdata, sizeof(*pdata));
-
- kfree(pdata);
-
- if (IS_ERR(pdev)) {
- pr_err("%s: device build err: %ld\n", __func__, PTR_ERR(pdev));
- return PTR_ERR(pdev);
- }
-
- i++;
-
- return 0;
-}
-
-static int __init omap_iommu_init(void)
-{
- /* If dtb is there, the devices will be created dynamically */
- if (of_have_populated_dt())
- return -ENODEV;
-
- return omap_hwmod_for_each_by_class("mmu", omap_iommu_dev_init, NULL);
-}
-omap_subsys_initcall(omap_iommu_init);
-/* must be ready before omap3isp is probed */
diff --git a/arch/arm/mach-omap2/omap2-restart.c b/arch/arm/mach-omap2/omap2-restart.c
index d937b2e4040b..497269db882b 100644
--- a/arch/arm/mach-omap2/omap2-restart.c
+++ b/arch/arm/mach-omap2/omap2-restart.c
@@ -62,4 +62,4 @@ static int __init omap2xxx_common_look_up_clks_for_reset(void)
return 0;
}
-omap_core_initcall(omap2xxx_common_look_up_clks_for_reset);
+omap_postcore_initcall(omap2xxx_common_look_up_clks_for_reset);
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 72ebc4c16bae..3750ed14f8c5 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -869,7 +869,7 @@ static int __init omap_device_init(void)
bus_register_notifier(&platform_bus_type, &platform_nb);
return 0;
}
-omap_core_initcall(omap_device_init);
+omap_postcore_initcall(omap_device_init);
/**
* omap_device_late_idle - idle devices without drivers
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 48495ad82aba..e9f65fec55c0 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -3313,7 +3313,7 @@ static int __init omap_hwmod_setup_all(void)
return 0;
}
-omap_core_initcall(omap_hwmod_setup_all);
+omap_postcore_initcall(omap_hwmod_setup_all);
/**
* omap_hwmod_enable - enable an omap_hwmod
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index aff78d5198d2..0a985325cd64 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -25,7 +25,6 @@
#include "l4_3xxx.h"
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/iommu-omap.h>
#include <plat/dmtimer.h>
#include "soc.h"
@@ -2957,80 +2956,40 @@ static struct omap_hwmod_class omap3xxx_mmu_hwmod_class = {
};
/* mmu isp */
-
-static struct omap_mmu_dev_attr mmu_isp_dev_attr = {
- .nr_tlb_entries = 8,
-};
-
static struct omap_hwmod omap3xxx_mmu_isp_hwmod;
-static struct omap_hwmod_irq_info omap3xxx_mmu_isp_irqs[] = {
- { .irq = 24 + OMAP_INTC_START, },
- { .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap3xxx_mmu_isp_addrs[] = {
- {
- .pa_start = 0x480bd400,
- .pa_end = 0x480bd47f,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
/* l4_core -> mmu isp */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmu_isp = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_mmu_isp_hwmod,
- .addr = omap3xxx_mmu_isp_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod omap3xxx_mmu_isp_hwmod = {
.name = "mmu_isp",
.class = &omap3xxx_mmu_hwmod_class,
- .mpu_irqs = omap3xxx_mmu_isp_irqs,
.main_clk = "cam_ick",
- .dev_attr = &mmu_isp_dev_attr,
.flags = HWMOD_NO_IDLEST,
};
/* mmu iva */
-static struct omap_mmu_dev_attr mmu_iva_dev_attr = {
- .nr_tlb_entries = 32,
-};
-
static struct omap_hwmod omap3xxx_mmu_iva_hwmod;
-static struct omap_hwmod_irq_info omap3xxx_mmu_iva_irqs[] = {
- { .irq = 28 + OMAP_INTC_START, },
- { .irq = -1 }
-};
static struct omap_hwmod_rst_info omap3xxx_mmu_iva_resets[] = {
{ .name = "mmu", .rst_shift = 1, .st_shift = 9 },
};
-static struct omap_hwmod_addr_space omap3xxx_mmu_iva_addrs[] = {
- {
- .pa_start = 0x5d000000,
- .pa_end = 0x5d00007f,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
-
/* l3_main -> iva mmu */
static struct omap_hwmod_ocp_if omap3xxx_l3_main__mmu_iva = {
.master = &omap3xxx_l3_main_hwmod,
.slave = &omap3xxx_mmu_iva_hwmod,
- .addr = omap3xxx_mmu_iva_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod omap3xxx_mmu_iva_hwmod = {
.name = "mmu_iva",
.class = &omap3xxx_mmu_hwmod_class,
- .mpu_irqs = omap3xxx_mmu_iva_irqs,
.clkdm_name = "iva2_clkdm",
.rst_lines = omap3xxx_mmu_iva_resets,
.rst_lines_cnt = ARRAY_SIZE(omap3xxx_mmu_iva_resets),
@@ -3043,7 +3002,6 @@ static struct omap_hwmod omap3xxx_mmu_iva_hwmod = {
.idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT,
},
},
- .dev_attr = &mmu_iva_dev_attr,
.flags = HWMOD_NO_IDLEST,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index a5e444b1e57a..dad871a4cd96 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -30,7 +30,6 @@
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <linux/platform_data/iommu-omap.h>
#include <plat/dmtimer.h>
#include "omap_hwmod.h"
@@ -2088,30 +2087,16 @@ static struct omap_hwmod_class omap44xx_mmu_hwmod_class = {
/* mmu ipu */
-static struct omap_mmu_dev_attr mmu_ipu_dev_attr = {
- .nr_tlb_entries = 32,
-};
-
static struct omap_hwmod omap44xx_mmu_ipu_hwmod;
static struct omap_hwmod_rst_info omap44xx_mmu_ipu_resets[] = {
{ .name = "mmu_cache", .rst_shift = 2 },
};
-static struct omap_hwmod_addr_space omap44xx_mmu_ipu_addrs[] = {
- {
- .pa_start = 0x55082000,
- .pa_end = 0x550820ff,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
-
/* l3_main_2 -> mmu_ipu */
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__mmu_ipu = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_mmu_ipu_hwmod,
.clk = "l3_div_ck",
- .addr = omap44xx_mmu_ipu_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -2130,35 +2115,20 @@ static struct omap_hwmod omap44xx_mmu_ipu_hwmod = {
.modulemode = MODULEMODE_HWCTRL,
},
},
- .dev_attr = &mmu_ipu_dev_attr,
};
/* mmu dsp */
-static struct omap_mmu_dev_attr mmu_dsp_dev_attr = {
- .nr_tlb_entries = 32,
-};
-
static struct omap_hwmod omap44xx_mmu_dsp_hwmod;
static struct omap_hwmod_rst_info omap44xx_mmu_dsp_resets[] = {
{ .name = "mmu_cache", .rst_shift = 1 },
};
-static struct omap_hwmod_addr_space omap44xx_mmu_dsp_addrs[] = {
- {
- .pa_start = 0x4a066000,
- .pa_end = 0x4a0660ff,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
-
/* l4_cfg -> dsp */
static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mmu_dsp = {
.master = &omap44xx_l4_cfg_hwmod,
.slave = &omap44xx_mmu_dsp_hwmod,
.clk = "l4_div_ck",
- .addr = omap44xx_mmu_dsp_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -2177,7 +2147,6 @@ static struct omap_hwmod omap44xx_mmu_dsp_hwmod = {
.modulemode = MODULEMODE_HWCTRL,
},
},
- .dev_attr = &mmu_dsp_dev_attr,
};
/*
@@ -3915,21 +3884,11 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = {
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_addr_space omap44xx_elm_addrs[] = {
- {
- .pa_start = 0x48078000,
- .pa_end = 0x48078fff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
/* l4_per -> elm */
static struct omap_hwmod_ocp_if omap44xx_l4_per__elm = {
.master = &omap44xx_l4_per_hwmod,
.slave = &omap44xx_elm_hwmod,
.clk = "l4_div_ck",
- .addr = omap44xx_elm_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index ee4e04434a94..848356e38b74 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -2103,7 +2103,7 @@ static struct omap_hwmod dra7xx_uart4_hwmod = {
.class = &dra7xx_uart_hwmod_class,
.clkdm_name = "l4per_clkdm",
.main_clk = "uart4_gfclk_mux",
- .flags = HWMOD_SWSUP_SIDLE_ACT,
+ .flags = HWMOD_SWSUP_SIDLE_ACT | DEBUG_OMAP4UART4_FLAGS,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L4PER_UART4_CLKCTRL_OFFSET,
diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
index 1b96cdfd1558..e493ae372910 100644
--- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
@@ -104,8 +104,8 @@
* The default .clkctrl_offs field is offset from CM_DEFAULT, that's
* TRM 18.7.6 CM_DEFAULT device register values minus 0x500
*/
-#define DM816X_CM_DEFAULT_OFFSET 0x500
-#define DM816X_CM_DEFAULT_USB_CLKCTRL (0x558 - DM816X_CM_DEFAULT_OFFSET)
+#define DM81XX_CM_DEFAULT_OFFSET 0x500
+#define DM81XX_CM_DEFAULT_USB_CLKCTRL (0x558 - DM81XX_CM_DEFAULT_OFFSET)
/* L3 Interconnect entries clocked at 125, 250 and 500MHz */
static struct omap_hwmod dm81xx_alwon_l3_slow_hwmod = {
@@ -557,22 +557,42 @@ static struct omap_hwmod_class dm81xx_usbotg_class = {
.sysc = &dm81xx_usbhsotg_sysc,
};
-static struct omap_hwmod dm81xx_usbss_hwmod = {
+static struct omap_hwmod dm814x_usbss_hwmod = {
+ .name = "usb_otg_hs",
+ .clkdm_name = "default_l3_slow_clkdm",
+ .main_clk = "pll260dcoclkldo", /* 481c5260.adpll.dcoclkldo */
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DM81XX_CM_DEFAULT_USB_CLKCTRL,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .class = &dm81xx_usbotg_class,
+};
+
+static struct omap_hwmod_ocp_if dm814x_default_l3_slow__usbss = {
+ .master = &dm81xx_default_l3_slow_hwmod,
+ .slave = &dm814x_usbss_hwmod,
+ .clk = "sysclk6_ck",
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod dm816x_usbss_hwmod = {
.name = "usb_otg_hs",
.clkdm_name = "default_l3_slow_clkdm",
.main_clk = "sysclk6_ck",
.prcm = {
.omap4 = {
- .clkctrl_offs = DM816X_CM_DEFAULT_USB_CLKCTRL,
+ .clkctrl_offs = DM81XX_CM_DEFAULT_USB_CLKCTRL,
.modulemode = MODULEMODE_SWCTRL,
},
},
.class = &dm81xx_usbotg_class,
};
-static struct omap_hwmod_ocp_if dm81xx_default_l3_slow__usbss = {
+static struct omap_hwmod_ocp_if dm816x_default_l3_slow__usbss = {
.master = &dm81xx_default_l3_slow_hwmod,
- .slave = &dm81xx_usbss_hwmod,
+ .slave = &dm816x_usbss_hwmod,
.clk = "sysclk6_ck",
.user = OCP_USER_MPU,
};
@@ -912,7 +932,7 @@ static struct omap_hwmod_ocp_if dm816x_l4_hs__emac1 = {
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_class_sysconfig dm816x_mmc_sysc = {
+static struct omap_hwmod_class_sysconfig dm81xx_mmc_sysc = {
.rev_offs = 0x0,
.sysc_offs = 0x110,
.syss_offs = 0x114,
@@ -923,24 +943,94 @@ static struct omap_hwmod_class_sysconfig dm816x_mmc_sysc = {
.sysc_fields = &omap_hwmod_sysc_type1,
};
-static struct omap_hwmod_class dm816x_mmc_class = {
+static struct omap_hwmod_class dm81xx_mmc_class = {
.name = "mmc",
- .sysc = &dm816x_mmc_sysc,
+ .sysc = &dm81xx_mmc_sysc,
};
-static struct omap_hwmod_opt_clk dm816x_mmc1_opt_clks[] = {
+static struct omap_hwmod_opt_clk dm81xx_mmc_opt_clks[] = {
{ .role = "dbck", .clk = "sysclk18_ck", },
};
-static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
- .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+static struct omap_hsmmc_dev_attr mmc_dev_attr = {
+};
+
+static struct omap_hwmod dm814x_mmc1_hwmod = {
+ .name = "mmc1",
+ .clkdm_name = "alwon_l3s_clkdm",
+ .opt_clks = dm81xx_mmc_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dm81xx_mmc_opt_clks),
+ .main_clk = "sysclk8_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DM814X_CM_ALWON_MMCHS_0_CLKCTRL,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .dev_attr = &mmc_dev_attr,
+ .class = &dm81xx_mmc_class,
+};
+
+static struct omap_hwmod_ocp_if dm814x_l4_ls__mmc1 = {
+ .master = &dm81xx_l4_ls_hwmod,
+ .slave = &dm814x_mmc1_hwmod,
+ .clk = "sysclk6_ck",
+ .user = OCP_USER_MPU,
+ .flags = OMAP_FIREWALL_L4
+};
+
+static struct omap_hwmod dm814x_mmc2_hwmod = {
+ .name = "mmc2",
+ .clkdm_name = "alwon_l3s_clkdm",
+ .opt_clks = dm81xx_mmc_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dm81xx_mmc_opt_clks),
+ .main_clk = "sysclk8_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DM814X_CM_ALWON_MMCHS_1_CLKCTRL,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .dev_attr = &mmc_dev_attr,
+ .class = &dm81xx_mmc_class,
+};
+
+static struct omap_hwmod_ocp_if dm814x_l4_ls__mmc2 = {
+ .master = &dm81xx_l4_ls_hwmod,
+ .slave = &dm814x_mmc2_hwmod,
+ .clk = "sysclk6_ck",
+ .user = OCP_USER_MPU,
+ .flags = OMAP_FIREWALL_L4
+};
+
+static struct omap_hwmod dm814x_mmc3_hwmod = {
+ .name = "mmc3",
+ .clkdm_name = "alwon_l3_med_clkdm",
+ .opt_clks = dm81xx_mmc_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dm81xx_mmc_opt_clks),
+ .main_clk = "sysclk8_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DM814X_CM_ALWON_MMCHS_2_CLKCTRL,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .dev_attr = &mmc_dev_attr,
+ .class = &dm81xx_mmc_class,
+};
+
+static struct omap_hwmod_ocp_if dm814x_alwon_l3_med__mmc3 = {
+ .master = &dm81xx_alwon_l3_med_hwmod,
+ .slave = &dm814x_mmc3_hwmod,
+ .clk = "sysclk4_ck",
+ .user = OCP_USER_MPU,
};
static struct omap_hwmod dm816x_mmc1_hwmod = {
.name = "mmc1",
.clkdm_name = "alwon_l3s_clkdm",
- .opt_clks = dm816x_mmc1_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(dm816x_mmc1_opt_clks),
+ .opt_clks = dm81xx_mmc_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dm81xx_mmc_opt_clks),
.main_clk = "sysclk10_ck",
.prcm = {
.omap4 = {
@@ -948,8 +1038,8 @@ static struct omap_hwmod dm816x_mmc1_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &mmc1_dev_attr,
- .class = &dm816x_mmc_class,
+ .dev_attr = &mmc_dev_attr,
+ .class = &dm81xx_mmc_class,
};
static struct omap_hwmod_ocp_if dm816x_l4_ls__mmc1 = {
@@ -1036,6 +1126,40 @@ static struct omap_hwmod_ocp_if dm81xx_l4_ls__mailbox = {
.user = OCP_USER_MPU,
};
+static struct omap_hwmod_class_sysconfig dm81xx_spinbox_sysc = {
+ .rev_offs = 0x000,
+ .sysc_offs = 0x010,
+ .syss_offs = 0x014,
+ .sysc_flags = SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE,
+ .idlemodes = SIDLE_FORCE | SIDLE_NO | SIDLE_SMART,
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dm81xx_spinbox_hwmod_class = {
+ .name = "spinbox",
+ .sysc = &dm81xx_spinbox_sysc,
+};
+
+static struct omap_hwmod dm81xx_spinbox_hwmod = {
+ .name = "spinbox",
+ .clkdm_name = "alwon_l3s_clkdm",
+ .class = &dm81xx_spinbox_hwmod_class,
+ .main_clk = "sysclk6_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DM81XX_CM_ALWON_SPINBOX_CLKCTRL,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+static struct omap_hwmod_ocp_if dm81xx_l4_ls__spinbox = {
+ .master = &dm81xx_l4_ls_hwmod,
+ .slave = &dm81xx_spinbox_hwmod,
+ .user = OCP_USER_MPU,
+};
+
static struct omap_hwmod_class dm81xx_tpcc_hwmod_class = {
.name = "tpcc",
};
@@ -1231,8 +1355,6 @@ static struct omap_hwmod_ocp_if dm81xx_tptc3__alwon_l3_fast = {
/*
* REVISIT: Test and enable the following once clocks work:
* dm81xx_l4_ls__mailbox
- * dm81xx_alwon_l3_slow__gpmc
- * dm81xx_default_l3_slow__usbss
*
* Also note that some devices share a single clkctrl_offs..
* For example, i2c1 and 3 share one, and i2c2 and 4 share one.
@@ -1252,6 +1374,8 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = {
&dm81xx_l4_ls__gpio2,
&dm81xx_l4_ls__elm,
&dm81xx_l4_ls__mcspi1,
+ &dm814x_l4_ls__mmc1,
+ &dm814x_l4_ls__mmc2,
&dm81xx_alwon_l3_fast__tpcc,
&dm81xx_alwon_l3_fast__tptc0,
&dm81xx_alwon_l3_fast__tptc1,
@@ -1265,6 +1389,9 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = {
&dm814x_l4_ls__timer2,
&dm814x_l4_hs__cpgmac0,
&dm814x_cpgmac0__mdio,
+ &dm81xx_alwon_l3_slow__gpmc,
+ &dm814x_default_l3_slow__usbss,
+ &dm814x_alwon_l3_med__mmc3,
NULL,
};
@@ -1298,6 +1425,7 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = {
&dm816x_l4_ls__timer7,
&dm81xx_l4_ls__mcspi1,
&dm81xx_l4_ls__mailbox,
+ &dm81xx_l4_ls__spinbox,
&dm81xx_l4_hs__emac0,
&dm81xx_emac0__mdio,
&dm816x_l4_hs__emac1,
@@ -1311,7 +1439,7 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = {
&dm81xx_tptc2__alwon_l3_fast,
&dm81xx_tptc3__alwon_l3_fast,
&dm81xx_alwon_l3_slow__gpmc,
- &dm81xx_default_l3_slow__usbss,
+ &dm816x_default_l3_slow__usbss,
NULL,
};
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 58144779dec4..e097055398de 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -265,7 +265,7 @@ static void __init nokia_n900_legacy_init(void)
pr_warn("Thumb binaries may crash randomly without this workaround\n");
}
- pr_info("RX-51: Registring OMAP3 HWRNG device\n");
+ pr_info("RX-51: Registering OMAP3 HWRNG device\n");
platform_device_register(&omap3_rom_rng_device);
}
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index 2e00c7f1f471..eb27ae066292 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -384,14 +384,14 @@ static struct powerdomain isp_814x_pwrdm = {
.voltdm = { .name = "core" },
};
-static struct powerdomain active_816x_pwrdm = {
+static struct powerdomain active_81xx_pwrdm = {
.name = "active_pwrdm",
.prcm_offs = TI816X_PRM_ACTIVE_MOD,
.pwrsts = PWRSTS_OFF_ON,
.voltdm = { .name = "core" },
};
-static struct powerdomain default_816x_pwrdm = {
+static struct powerdomain default_81xx_pwrdm = {
.name = "default_pwrdm",
.prcm_offs = TI81XX_PRM_DEFAULT_MOD,
.pwrsts = PWRSTS_OFF_ON,
@@ -486,6 +486,8 @@ static struct powerdomain *powerdomains_am35x[] __initdata = {
static struct powerdomain *powerdomains_ti814x[] __initdata = {
&alwon_81xx_pwrdm,
&device_81xx_pwrdm,
+ &active_81xx_pwrdm,
+ &default_81xx_pwrdm,
&gem_814x_pwrdm,
&ivahd_814x_pwrdm,
&hdvpss_814x_pwrdm,
@@ -497,8 +499,8 @@ static struct powerdomain *powerdomains_ti814x[] __initdata = {
static struct powerdomain *powerdomains_ti816x[] __initdata = {
&alwon_81xx_pwrdm,
&device_81xx_pwrdm,
- &active_816x_pwrdm,
- &default_816x_pwrdm,
+ &active_81xx_pwrdm,
+ &default_81xx_pwrdm,
&ivahd0_816x_pwrdm,
&ivahd1_816x_pwrdm,
&ivahd2_816x_pwrdm,
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 5fb50fe54153..f164c6b32ce2 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -213,7 +213,7 @@ static int __init omap_serial_early_init(void)
return 0;
}
-omap_core_initcall(omap_serial_early_init);
+omap_postcore_initcall(omap_serial_early_init);
/**
* omap_serial_init_port() - initialize single serial port
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index f86692dbcfd5..5b385bb8aff9 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -194,8 +194,8 @@ static struct device_node * __init omap_get_timer_dt(const struct of_device_id *
/**
* omap_dmtimer_init - initialisation function when device tree is used
*
- * For secure OMAP3 devices, timers with device type "timer-secure" cannot
- * be used by the kernel as they are reserved. Therefore, to prevent the
+ * For secure OMAP3/DRA7xx devices, timers with device type "timer-secure"
+ * cannot be used by the kernel as they are reserved. Therefore, to prevent the
* kernel registering these devices remove them dynamically from the device
* tree on boot.
*/
@@ -203,7 +203,7 @@ static void __init omap_dmtimer_init(void)
{
struct device_node *np;
- if (!cpu_is_omap34xx())
+ if (!cpu_is_omap34xx() && !soc_is_dra7xx())
return;
/* If we are a secure device, remove any secure timer nodes */
diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c
index 938888fc55a1..d42a07e33482 100644
--- a/arch/arm/mach-rockchip/platsmp.c
+++ b/arch/arm/mach-rockchip/platsmp.c
@@ -42,6 +42,7 @@ static int ncores;
#define PMU_PWRDN_SCU 4
static struct regmap *pmu;
+static int has_pmu = true;
static int pmu_power_domain_is_on(int pd)
{
@@ -89,20 +90,23 @@ static int pmu_set_power_domain(int pd, bool on)
if (!IS_ERR(rstc) && !on)
reset_control_assert(rstc);
- ret = regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), val);
- if (ret < 0) {
- pr_err("%s: could not update power domain\n", __func__);
- return ret;
- }
-
- ret = -1;
- while (ret != on) {
- ret = pmu_power_domain_is_on(pd);
+ if (has_pmu) {
+ ret = regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), val);
if (ret < 0) {
- pr_err("%s: could not read power domain state\n",
+ pr_err("%s: could not update power domain\n",
__func__);
return ret;
}
+
+ ret = -1;
+ while (ret != on) {
+ ret = pmu_power_domain_is_on(pd);
+ if (ret < 0) {
+ pr_err("%s: could not read power domain state\n",
+ __func__);
+ return ret;
+ }
+ }
}
if (!IS_ERR(rstc)) {
@@ -122,7 +126,7 @@ static int rockchip_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
int ret;
- if (!sram_base_addr || !pmu) {
+ if (!sram_base_addr || (has_pmu && !pmu)) {
pr_err("%s: sram or pmu missing for cpu boot\n", __func__);
return -ENXIO;
}
@@ -275,7 +279,7 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
return;
}
- if (rockchip_smp_prepare_pmu())
+ if (has_pmu && rockchip_smp_prepare_pmu())
return;
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
@@ -318,6 +322,13 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
pmu_set_power_domain(0 + i, false);
}
+static void __init rk3036_smp_prepare_cpus(unsigned int max_cpus)
+{
+ has_pmu = false;
+
+ rockchip_smp_prepare_cpus(max_cpus);
+}
+
#ifdef CONFIG_HOTPLUG_CPU
static int rockchip_cpu_kill(unsigned int cpu)
{
@@ -340,6 +351,15 @@ static void rockchip_cpu_die(unsigned int cpu)
}
#endif
+static const struct smp_operations rk3036_smp_ops __initconst = {
+ .smp_prepare_cpus = rk3036_smp_prepare_cpus,
+ .smp_boot_secondary = rockchip_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_kill = rockchip_cpu_kill,
+ .cpu_die = rockchip_cpu_die,
+#endif
+};
+
static const struct smp_operations rockchip_smp_ops __initconst = {
.smp_prepare_cpus = rockchip_smp_prepare_cpus,
.smp_boot_secondary = rockchip_boot_secondary,
@@ -349,4 +369,5 @@ static const struct smp_operations rockchip_smp_ops __initconst = {
#endif
};
+CPU_METHOD_OF_DECLARE(rk3036_smp, "rockchip,rk3036-smp", &rk3036_smp_ops);
CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp", &rockchip_smp_ops);
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index 251c7b9c5f9b..3f07cc5dfe5f 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -82,6 +82,7 @@ static const char * const rockchip_board_dt_compat[] = {
"rockchip,rk3066a",
"rockchip,rk3066b",
"rockchip,rk3188",
+ "rockchip,rk3228",
"rockchip,rk3288",
NULL,
};
diff --git a/arch/arm/mach-tango/Kconfig b/arch/arm/mach-tango/Kconfig
new file mode 100644
index 000000000000..d6a3714b096e
--- /dev/null
+++ b/arch/arm/mach-tango/Kconfig
@@ -0,0 +1,12 @@
+config ARCH_TANGO
+ bool "Sigma Designs Tango4 (SMP87xx)" if ARCH_MULTI_V7
+ # Cortex-A9 MPCore r3p0, PL310 r3p2
+ select ARCH_HAS_HOLES_MEMORYMODEL
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_764369 if SMP
+ select ARM_ERRATA_775420
+ select ARM_GIC
+ select CLKSRC_TANGO_XTAL
+ select HAVE_ARM_SCU
+ select HAVE_ARM_TWD
+ select TANGO_IRQ
diff --git a/arch/arm/mach-tango/Makefile b/arch/arm/mach-tango/Makefile
new file mode 100644
index 000000000000..f33935e42e77
--- /dev/null
+++ b/arch/arm/mach-tango/Makefile
@@ -0,0 +1,5 @@
+plus_sec := $(call as-instr,.arch_extension sec,+sec)
+AFLAGS_smc.o := -Wa,-march=armv7-a$(plus_sec)
+
+obj-y += setup.o smc.o
+obj-$(CONFIG_SMP) += platsmp.o
diff --git a/arch/arm/mach-tango/platsmp.c b/arch/arm/mach-tango/platsmp.c
new file mode 100644
index 000000000000..a18d5a34e2f5
--- /dev/null
+++ b/arch/arm/mach-tango/platsmp.c
@@ -0,0 +1,16 @@
+#include <linux/init.h>
+#include <linux/smp.h>
+#include "smc.h"
+
+static int tango_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ tango_set_aux_boot_addr(virt_to_phys(secondary_startup));
+ tango_start_aux_core(cpu);
+ return 0;
+}
+
+static struct smp_operations tango_smp_ops __initdata = {
+ .smp_boot_secondary = tango_boot_secondary,
+};
+
+CPU_METHOD_OF_DECLARE(tango4_smp, "sigma,tango4-smp", &tango_smp_ops);
diff --git a/arch/arm/mach-tango/setup.c b/arch/arm/mach-tango/setup.c
new file mode 100644
index 000000000000..f14b6c7d255b
--- /dev/null
+++ b/arch/arm/mach-tango/setup.c
@@ -0,0 +1,17 @@
+#include <asm/mach/arch.h>
+#include <asm/hardware/cache-l2x0.h>
+#include "smc.h"
+
+static void tango_l2c_write(unsigned long val, unsigned int reg)
+{
+ if (reg == L2X0_CTRL)
+ tango_set_l2_control(val);
+}
+
+static const char *const tango_dt_compat[] = { "sigma,tango4", NULL };
+
+DT_MACHINE_START(TANGO_DT, "Sigma Tango DT")
+ .dt_compat = tango_dt_compat,
+ .l2c_aux_mask = ~0,
+ .l2c_write_sec = tango_l2c_write,
+MACHINE_END
diff --git a/arch/arm/mach-tango/smc.S b/arch/arm/mach-tango/smc.S
new file mode 100644
index 000000000000..5d932ce3c1bd
--- /dev/null
+++ b/arch/arm/mach-tango/smc.S
@@ -0,0 +1,9 @@
+#include <linux/linkage.h>
+
+ENTRY(tango_smc)
+ push {lr}
+ mov ip, r1
+ dsb /* This barrier is probably unnecessary */
+ smc #0
+ pop {pc}
+ENDPROC(tango_smc)
diff --git a/arch/arm/mach-tango/smc.h b/arch/arm/mach-tango/smc.h
new file mode 100644
index 000000000000..7a4af35cc390
--- /dev/null
+++ b/arch/arm/mach-tango/smc.h
@@ -0,0 +1,5 @@
+extern int tango_smc(unsigned int val, unsigned int service);
+
+#define tango_set_l2_control(val) tango_smc(val, 0x102)
+#define tango_start_aux_core(val) tango_smc(val, 0x104)
+#define tango_set_aux_boot_addr(val) tango_smc((unsigned int)val, 0x105)
diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
index b640458fd757..82dddee3a469 100644
--- a/arch/arm/mach-uniphier/Kconfig
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -6,6 +6,7 @@ config ARCH_UNIPHIER
select ARM_GIC
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
+ select PINCTRL
help
Support for UniPhier SoC family developed by Socionext Inc.
(formerly, System LSI Business Division of Panasonic Corporation)
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index f287667e4fc5..fd0aeeb09881 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -1,6 +1,7 @@
config ARCH_ZYNQ
bool "Xilinx Zynq ARM Cortex A9 Platform"
depends on ARCH_MULTI_V7
+ select ARCH_HAS_RESET_CONTROLLER
select ARCH_SUPPORTS_BIG_ENDIAN
select ARM_AMBA
select ARM_GIC
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 8ca94d379bc3..7a327bd32521 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -36,6 +36,7 @@
*/
#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/device.h>
@@ -137,6 +138,31 @@ static int omap_dm_timer_reset(struct omap_dm_timer *timer)
return 0;
}
+static int omap_dm_timer_of_set_source(struct omap_dm_timer *timer)
+{
+ int ret;
+ struct clk *parent;
+
+ /*
+ * FIXME: OMAP1 devices do not use the clock framework for dmtimers so
+ * do not call clk_get() for these devices.
+ */
+ if (!timer->fclk)
+ return -ENODEV;
+
+ parent = clk_get(&timer->pdev->dev, NULL);
+ if (IS_ERR(parent))
+ return -ENODEV;
+
+ ret = clk_set_parent(timer->fclk, parent);
+ if (ret < 0)
+ pr_err("%s: failed to set parent\n", __func__);
+
+ clk_put(parent);
+
+ return ret;
+}
+
static int omap_dm_timer_prepare(struct omap_dm_timer *timer)
{
int rc;
@@ -166,7 +192,11 @@ static int omap_dm_timer_prepare(struct omap_dm_timer *timer)
__omap_dm_timer_enable_posted(timer);
omap_dm_timer_disable(timer);
- return omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
+ rc = omap_dm_timer_of_set_source(timer);
+ if (rc == -ENODEV)
+ return omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
+
+ return rc;
}
static inline u32 omap_dm_timer_reserved_systimer(int id)
@@ -504,6 +534,12 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
if (IS_ERR(timer->fclk))
return -EINVAL;
+#if defined(CONFIG_COMMON_CLK)
+ /* Check if the clock has configurable parents */
+ if (clk_hw_get_num_parents(__clk_get_hw(timer->fclk)) < 2)
+ return 0;
+#endif
+
switch (source) {
case OMAP_TIMER_SRC_SYS_CLK:
parent_name = "timer_sys_ck";
@@ -943,6 +979,10 @@ static const struct of_device_id omap_timer_match[] = {
.compatible = "ti,am335x-timer-1ms",
.data = &omap3plus_pdata,
},
+ {
+ .compatible = "ti,dm816-timer",
+ .data = &omap3plus_pdata,
+ },
{},
};
MODULE_DEVICE_TABLE(of, omap_timer_match);
OpenPOWER on IntegriCloud