diff options
Diffstat (limited to 'arch')
259 files changed, 13286 insertions, 4478 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 05fc7cf6711d..92951103255a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -644,6 +644,7 @@ config ARCH_S3C2410 select ARCH_HAS_CPUFREQ select HAVE_CLK select ARCH_USES_GETTIMEOFFSET + select HAVE_S3C2410_I2C help Samsung S3C2410X CPU based systems, such as the Simtec Electronics BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or @@ -673,6 +674,8 @@ config ARCH_S3C64XX select S3C_DEV_NAND select USB_ARCH_HAS_OHCI select SAMSUNG_GPIOLIB_4BIT + select HAVE_S3C2410_I2C + select HAVE_S3C2410_WATCHDOG help Samsung S3C64XX series based systems @@ -681,7 +684,10 @@ config ARCH_S5P6440 select CPU_V6 select GENERIC_GPIO select HAVE_CLK + select HAVE_S3C2410_WATCHDOG select ARCH_USES_GETTIMEOFFSET + select HAVE_S3C2410_I2C + select HAVE_S3C_RTC help Samsung S5P6440 CPU based systems @@ -691,6 +697,7 @@ config ARCH_S5P6442 select GENERIC_GPIO select HAVE_CLK select ARCH_USES_GETTIMEOFFSET + select HAVE_S3C2410_WATCHDOG help Samsung S5P6442 CPU based systems @@ -701,6 +708,9 @@ config ARCH_S5PC100 select CPU_V7 select ARM_L1_CACHE_SHIFT_6 select ARCH_USES_GETTIMEOFFSET + select HAVE_S3C2410_I2C + select HAVE_S3C_RTC + select HAVE_S3C2410_WATCHDOG help Samsung S5PC100 series based systems @@ -711,9 +721,21 @@ config ARCH_S5PV210 select HAVE_CLK select ARM_L1_CACHE_SHIFT_6 select ARCH_USES_GETTIMEOFFSET + select HAVE_S3C2410_I2C + select HAVE_S3C_RTC + select HAVE_S3C2410_WATCHDOG help Samsung S5PV210/S5PC110 series based systems +config ARCH_S5PV310 + bool "Samsung S5PV310/S5PC210" + select CPU_V7 + select GENERIC_GPIO + select HAVE_CLK + select GENERIC_CLOCKEVENTS + help + Samsung S5PV310 series based systems + config ARCH_SHARK bool "Shark" select CPU_SA110 @@ -915,6 +937,8 @@ source "arch/arm/mach-s5pc100/Kconfig" source "arch/arm/mach-s5pv210/Kconfig" +source "arch/arm/mach-s5pv310/Kconfig" + source "arch/arm/mach-shmobile/Kconfig" source "arch/arm/plat-stmp3xxx/Kconfig" @@ -1120,11 +1144,11 @@ config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\ MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\ - ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_TEGRA) + ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4) depends on GENERIC_CLOCKEVENTS select USE_GENERIC_SMP_HELPERS - select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || \ - ARCH_VEXPRESS_CA9X4 || ARCH_TEGRA) + select HAVE_ARM_SCU if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 ||\ + ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -1194,10 +1218,10 @@ config LOCAL_TIMERS bool "Use local timer interrupts" depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \ REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \ - ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_TEGRA) + ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4) default y - select HAVE_ARM_TWD if ARCH_REALVIEW || ARCH_VEXPRESS || ARCH_OMAP4 || \\ - ARCH_U8500 || ARCH_TEGRA + select HAVE_ARM_TWD if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 || \ + ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS help Enable support for local timers on SMP platforms, rather then the legacy IPI broadcast method. Local timers allows the system @@ -1208,7 +1232,8 @@ source kernel/Kconfig.preempt config HZ int - default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210 + default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || \ + ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE diff --git a/arch/arm/Makefile b/arch/arm/Makefile index a8d4dca9da35..99b8200138d2 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -174,6 +174,7 @@ machine-$(CONFIG_ARCH_S5P6440) := s5p6440 machine-$(CONFIG_ARCH_S5P6442) := s5p6442 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 machine-$(CONFIG_ARCH_S5PV210) := s5pv210 +machine-$(CONFIG_ARCH_S5PV310) := s5pv310 machine-$(CONFIG_ARCH_SA1100) := sa1100 machine-$(CONFIG_ARCH_SHARK) := shark machine-$(CONFIG_ARCH_SHMOBILE) := shmobile diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 7636c9b3f9a7..68775e33476c 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -33,7 +33,7 @@ ifeq ($(CONFIG_CPU_XSCALE),y) OBJS += head-xscale.o endif -ifeq ($(CONFIG_PXA_SHARPSL),y) +ifeq ($(CONFIG_PXA_SHARPSL_DETECT_MACH_ID),y) OBJS += head-sharpsl.o endif diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index 7974baacafce..6c0913562455 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -263,14 +263,6 @@ static int it8152_pci_platform_notify_remove(struct device *dev) return 0; } -int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) -{ - dev_dbg(dev, "%s: dma_addr %08x, size %08x\n", - __func__, dma_addr, size); - return (dev->bus == &pci_bus_type) && - ((dma_addr + size - PHYS_OFFSET) >= SZ_64M); -} - int __init it8152_pci_setup(int nr, struct pci_sys_data *sys) { it8152_io.start = IT8152_IO_BASE + 0x12000; diff --git a/arch/arm/configs/s5pc110_defconfig b/arch/arm/configs/s5pc110_defconfig deleted file mode 100644 index 22c2d147f793..000000000000 --- a/arch/arm/configs/s5pc110_defconfig +++ /dev/null @@ -1,66 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S5PV210=y -CONFIG_S3C_LOWLEVEL_UART_PORT=1 -CONFIG_MACH_SMDKC110=y -CONFIG_VMSPLIT_2G=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_SAMSUNG=y -CONFIG_SERIAL_SAMSUNG_CONSOLE=y -CONFIG_HW_RANDOM=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_CRAMFS=y -CONFIG_ROMFS_FS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_PREEMPT is not set -CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -CONFIG_EARLY_PRINTK=y -CONFIG_DEBUG_S3C_UART=1 -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig index 1753836d0055..0488a1eb4d7d 100644 --- a/arch/arm/configs/s5pv210_defconfig +++ b/arch/arm/configs/s5pv210_defconfig @@ -7,6 +7,11 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_S5PV210=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 +CONFIG_S3C_DEV_FB=y +CONFIG_S5PV210_SETUP_FB_24BPP=y +CONFIG_MACH_AQUILA=y +CONFIG_MACH_GONI=y +CONFIG_MACH_SMDKC110=y CONFIG_MACH_SMDKV210=y CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT=y diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 69ce0727edb5..b5ccc6a993d5 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -298,7 +298,15 @@ extern void dmabounce_unregister_dev(struct device *); * DMA access and 1 if the buffer needs to be bounced. * */ +#ifdef CONFIG_SA1111 extern int dma_needs_bounce(struct device*, dma_addr_t, size_t); +#else +static inline int dma_needs_bounce(struct device *dev, dma_addr_t addr, + size_t size) +{ + return 0; +} +#endif /* * The DMA API, implemented by dmabounce.c. See below for descriptions. diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index 6750b8e45a49..5747a8baa413 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -59,6 +59,8 @@ typedef struct user_fp elf_fpregset_t; #define R_ARM_THM_CALL 10 #define R_ARM_THM_JUMP24 30 +#define R_ARM_THM_MOVW_ABS_NC 47 +#define R_ARM_THM_MOVT_ABS 48 /* * These are used to set parameters in the core dumps. diff --git a/arch/arm/include/asm/hardware/scoop.h b/arch/arm/include/asm/hardware/scoop.h index 46492a63a7c4..ebb3ceaa8fac 100644 --- a/arch/arm/include/asm/hardware/scoop.h +++ b/arch/arm/include/asm/hardware/scoop.h @@ -22,18 +22,23 @@ #define SCOOP_GPWR 0x24 #define SCOOP_GPRR 0x28 -#define SCOOP_GPCR_PA22 ( 1 << 12 ) -#define SCOOP_GPCR_PA21 ( 1 << 11 ) -#define SCOOP_GPCR_PA20 ( 1 << 10 ) -#define SCOOP_GPCR_PA19 ( 1 << 9 ) -#define SCOOP_GPCR_PA18 ( 1 << 8 ) -#define SCOOP_GPCR_PA17 ( 1 << 7 ) -#define SCOOP_GPCR_PA16 ( 1 << 6 ) -#define SCOOP_GPCR_PA15 ( 1 << 5 ) -#define SCOOP_GPCR_PA14 ( 1 << 4 ) -#define SCOOP_GPCR_PA13 ( 1 << 3 ) -#define SCOOP_GPCR_PA12 ( 1 << 2 ) -#define SCOOP_GPCR_PA11 ( 1 << 1 ) +#define SCOOP_CPR_OUT (1 << 7) +#define SCOOP_CPR_SD_3V (1 << 2) +#define SCOOP_CPR_CF_XV (1 << 1) +#define SCOOP_CPR_CF_3V (1 << 0) + +#define SCOOP_GPCR_PA22 (1 << 12) +#define SCOOP_GPCR_PA21 (1 << 11) +#define SCOOP_GPCR_PA20 (1 << 10) +#define SCOOP_GPCR_PA19 (1 << 9) +#define SCOOP_GPCR_PA18 (1 << 8) +#define SCOOP_GPCR_PA17 (1 << 7) +#define SCOOP_GPCR_PA16 (1 << 6) +#define SCOOP_GPCR_PA15 (1 << 5) +#define SCOOP_GPCR_PA14 (1 << 4) +#define SCOOP_GPCR_PA13 (1 << 3) +#define SCOOP_GPCR_PA12 (1 << 2) +#define SCOOP_GPCR_PA11 (1 << 1) struct scoop_config { unsigned short io_out; diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index c628bdf6c430..6b4605893f1e 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -102,7 +102,9 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, unsigned long loc; Elf32_Sym *sym; s32 offset; +#ifdef CONFIG_THUMB2_KERNEL u32 upper, lower, sign, j1, j2; +#endif offset = ELF32_R_SYM(rel->r_info); if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) { @@ -185,6 +187,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, (offset & 0x0fff); break; +#ifdef CONFIG_THUMB2_KERNEL case R_ARM_THM_CALL: case R_ARM_THM_JUMP24: upper = *(u16 *)loc; @@ -233,9 +236,40 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, *(u16 *)(loc + 2) = (u16)((lower & 0xd000) | (j1 << 13) | (j2 << 11) | ((offset >> 1) & 0x07ff)); + break; + + case R_ARM_THM_MOVW_ABS_NC: + case R_ARM_THM_MOVT_ABS: upper = *(u16 *)loc; lower = *(u16 *)(loc + 2); + + /* + * MOVT/MOVW instructions encoding in Thumb-2: + * + * i = upper[10] + * imm4 = upper[3:0] + * imm3 = lower[14:12] + * imm8 = lower[7:0] + * + * imm16 = imm4:i:imm3:imm8 + */ + offset = ((upper & 0x000f) << 12) | + ((upper & 0x0400) << 1) | + ((lower & 0x7000) >> 4) | (lower & 0x00ff); + offset = (offset ^ 0x8000) - 0x8000; + offset += sym->st_value; + + if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_ABS) + offset >>= 16; + + *(u16 *)loc = (u16)((upper & 0xfbf0) | + ((offset & 0xf000) >> 12) | + ((offset & 0x0800) >> 1)); + *(u16 *)(loc + 2) = (u16)((lower & 0x8f00) | + ((offset & 0x0700) << 4) | + (offset & 0x00ff)); break; +#endif default: printk(KERN_ERR "%s: unknown relocation: %u\n", diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h index b3ebe9e4871f..d0b7d870be9c 100644 --- a/arch/arm/mach-clps711x/include/mach/hardware.h +++ b/arch/arm/mach-clps711x/include/mach/hardware.h @@ -69,13 +69,6 @@ #define SYSPLD_VIRT_BASE 0xfe000000 #define SYSPLD_BASE SYSPLD_VIRT_BASE -#ifndef __ASSEMBLER__ - -#define PCIO_BASE IO_BASE - -#endif - - #if defined (CONFIG_ARCH_AUTCPU12) #define CS89712_VIRT_BASE CLPS7111_VIRT_BASE diff --git a/arch/arm/mach-gemini/Kconfig b/arch/arm/mach-gemini/Kconfig index 515b75cf2e8b..6f066ee4bf24 100644 --- a/arch/arm/mach-gemini/Kconfig +++ b/arch/arm/mach-gemini/Kconfig @@ -2,6 +2,13 @@ if ARCH_GEMINI menu "Cortina Systems Gemini Implementations" +config MACH_NAS4220B + bool "Raidsonic NAS-4220-B" + select GEMINI_MEM_SWAP + help + Say Y here if you intend to run this kernel on a + Raidsonic NAS-4220-B. + config MACH_RUT100 bool "Teltonika RUT100" select GEMINI_MEM_SWAP @@ -9,6 +16,20 @@ config MACH_RUT100 Say Y here if you intend to run this kernel on a Teltonika 3G Router RUT100. +config MACH_WBD111 + bool "Wiliboard WBD-111" + select GEMINI_MEM_SWAP + help + Say Y here if you intend to run this kernel on a + Wiliboard WBD-111. + +config MACH_WBD222 + bool "Wiliboard WBD-222" + select GEMINI_MEM_SWAP + help + Say Y here if you intend to run this kernel on a + Wiliboard WBD-222. + endmenu config GEMINI_MEM_SWAP diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile index 719505b81821..c5b24b95a76e 100644 --- a/arch/arm/mach-gemini/Makefile +++ b/arch/arm/mach-gemini/Makefile @@ -7,4 +7,7 @@ obj-y := irq.o mm.o time.o devices.o gpio.o # Board-specific support +obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o obj-$(CONFIG_MACH_RUT100) += board-rut1xx.o +obj-$(CONFIG_MACH_WBD111) += board-wbd111.o +obj-$(CONFIG_MACH_WBD222) += board-wbd222.o diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c new file mode 100644 index 000000000000..01f1d6daab44 --- /dev/null +++ b/arch/arm/mach-gemini/board-nas4220b.c @@ -0,0 +1,111 @@ +/* + * Support for Raidsonic NAS-4220-B + * + * Copyright (C) 2009 Janos Laube <janos.dev@gmail.com> + * + * based on rut1xx.c + * Copyright (C) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> +#include <linux/mdio-gpio.h> +#include <linux/io.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include <mach/hardware.h> +#include <mach/global_reg.h> + +#include "common.h" + +static struct sys_timer ib4220b_timer = { + .init = gemini_timer_init, +}; + +static struct gpio_led ib4220b_leds[] = { + { + .name = "nas4220b:orange:hdd", + .default_trigger = "none", + .gpio = 60, + }, + { + .name = "nas4220b:green:os", + .default_trigger = "heartbeat", + .gpio = 62, + }, +}; + +static struct gpio_led_platform_data ib4220b_leds_data = { + .num_leds = ARRAY_SIZE(ib4220b_leds), + .leds = ib4220b_leds, +}; + +static struct platform_device ib4220b_led_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &ib4220b_leds_data, + }, +}; + +static struct gpio_keys_button ib4220b_keys[] = { + { + .code = KEY_SETUP, + .gpio = 61, + .active_low = 1, + .desc = "Backup Button", + .type = EV_KEY, + }, + { + .code = KEY_RESTART, + .gpio = 63, + .active_low = 1, + .desc = "Softreset Button", + .type = EV_KEY, + }, +}; + +static struct gpio_keys_platform_data ib4220b_keys_data = { + .buttons = ib4220b_keys, + .nbuttons = ARRAY_SIZE(ib4220b_keys), +}; + +static struct platform_device ib4220b_key_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &ib4220b_keys_data, + }, +}; + +static void __init ib4220b_init(void) +{ + gemini_gpio_init(); + platform_register_uart(); + platform_register_pflash(SZ_16M, NULL, 0); + platform_device_register(&ib4220b_led_device); + platform_device_register(&ib4220b_key_device); +} + +MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B") + .phys_io = 0x7fffc000, + .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc, + .boot_params = 0x100, + .map_io = gemini_map_io, + .init_irq = gemini_init_irq, + .timer = &ib4220b_timer, + .init_machine = ib4220b_init, +MACHINE_END diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c new file mode 100644 index 000000000000..36538c15b3c4 --- /dev/null +++ b/arch/arm/mach-gemini/board-wbd111.c @@ -0,0 +1,143 @@ +/* + * Support for Wiliboard WBD-111 + * + * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/input.h> +#include <linux/skbuff.h> +#include <linux/gpio_keys.h> +#include <linux/mdio-gpio.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + + +#include "common.h" + +static struct gpio_keys_button wbd111_keys[] = { + { + .code = KEY_SETUP, + .gpio = 5, + .active_low = 1, + .desc = "reset", + .type = EV_KEY, + }, +}; + +static struct gpio_keys_platform_data wbd111_keys_data = { + .buttons = wbd111_keys, + .nbuttons = ARRAY_SIZE(wbd111_keys), +}; + +static struct platform_device wbd111_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &wbd111_keys_data, + }, +}; + +static struct gpio_led wbd111_leds[] = { + { + .name = "L3red", + .gpio = 1, + }, + { + .name = "L4green", + .gpio = 2, + }, + { + .name = "L4red", + .gpio = 3, + }, + { + .name = "L3green", + .gpio = 5, + }, +}; + +static struct gpio_led_platform_data wbd111_leds_data = { + .num_leds = ARRAY_SIZE(wbd111_leds), + .leds = wbd111_leds, +}; + +static struct platform_device wbd111_leds_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &wbd111_leds_data, + }, +}; + +static struct sys_timer wbd111_timer = { + .init = gemini_timer_init, +}; + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition wbd111_partitions[] = { + { + .name = "RedBoot", + .offset = 0, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "kernel", + .offset = 0x020000, + .size = 0x100000, + } , { + .name = "rootfs", + .offset = 0x120000, + .size = 0x6a0000, + } , { + .name = "VCTL", + .offset = 0x7c0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "cfg", + .offset = 0x7d0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "FIS", + .offset = 0x7e0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } +}; +#define wbd111_num_partitions ARRAY_SIZE(wbd111_partitions) +#else +#define wbd111_partitions NULL +#define wbd111_num_partitions 0 +#endif /* CONFIG_MTD_PARTITIONS */ + +static void __init wbd111_init(void) +{ + gemini_gpio_init(); + platform_register_uart(); + platform_register_pflash(SZ_8M, wbd111_partitions, + wbd111_num_partitions); + platform_device_register(&wbd111_leds_device); + platform_device_register(&wbd111_keys_device); +} + +MACHINE_START(WBD111, "Wiliboard WBD-111") + .phys_io = 0x7fffc000, + .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc, + .boot_params = 0x100, + .map_io = gemini_map_io, + .init_irq = gemini_init_irq, + .timer = &wbd111_timer, + .init_machine = wbd111_init, +MACHINE_END diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c new file mode 100644 index 000000000000..ece8b4c65110 --- /dev/null +++ b/arch/arm/mach-gemini/board-wbd222.c @@ -0,0 +1,143 @@ +/* + * Support for Wiliboard WBD-222 + * + * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/input.h> +#include <linux/skbuff.h> +#include <linux/gpio_keys.h> +#include <linux/mdio-gpio.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + + +#include "common.h" + +static struct gpio_keys_button wbd222_keys[] = { + { + .code = KEY_SETUP, + .gpio = 5, + .active_low = 1, + .desc = "reset", + .type = EV_KEY, + }, +}; + +static struct gpio_keys_platform_data wbd222_keys_data = { + .buttons = wbd222_keys, + .nbuttons = ARRAY_SIZE(wbd222_keys), +}; + +static struct platform_device wbd222_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &wbd222_keys_data, + }, +}; + +static struct gpio_led wbd222_leds[] = { + { + .name = "L3red", + .gpio = 1, + }, + { + .name = "L4green", + .gpio = 2, + }, + { + .name = "L4red", + .gpio = 3, + }, + { + .name = "L3green", + .gpio = 5, + }, +}; + +static struct gpio_led_platform_data wbd222_leds_data = { + .num_leds = ARRAY_SIZE(wbd222_leds), + .leds = wbd222_leds, +}; + +static struct platform_device wbd222_leds_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &wbd222_leds_data, + }, +}; + +static struct sys_timer wbd222_timer = { + .init = gemini_timer_init, +}; + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition wbd222_partitions[] = { + { + .name = "RedBoot", + .offset = 0, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "kernel", + .offset = 0x020000, + .size = 0x100000, + } , { + .name = "rootfs", + .offset = 0x120000, + .size = 0x6a0000, + } , { + .name = "VCTL", + .offset = 0x7c0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "cfg", + .offset = 0x7d0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "FIS", + .offset = 0x7e0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } +}; +#define wbd222_num_partitions ARRAY_SIZE(wbd222_partitions) +#else +#define wbd222_partitions NULL +#define wbd222_num_partitions 0 +#endif /* CONFIG_MTD_PARTITIONS */ + +static void __init wbd222_init(void) +{ + gemini_gpio_init(); + platform_register_uart(); + platform_register_pflash(SZ_8M, wbd222_partitions, + wbd222_num_partitions); + platform_device_register(&wbd222_leds_device); + platform_device_register(&wbd222_keys_device); +} + +MACHINE_START(WBD222, "Wiliboard WBD-222") + .phys_io = 0x7fffc000, + .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc, + .boot_params = 0x100, + .map_io = gemini_map_io, + .init_irq = gemini_init_irq, + .timer = &wbd222_timer, + .init_machine = wbd222_init, +MACHINE_END diff --git a/arch/arm/mach-h720x/include/mach/hardware.h b/arch/arm/mach-h720x/include/mach/hardware.h index 6c19156e2a42..c55a52c6541d 100644 --- a/arch/arm/mach-h720x/include/mach/hardware.h +++ b/arch/arm/mach-h720x/include/mach/hardware.h @@ -182,8 +182,6 @@ #define SERIAL_ENABLE_EN (1<<0) /* General defines to pacify gcc */ -#define PCIO_BASE (0) /* for inb, outb and friends */ -#define PCIO_VIRT PCIO_BASE #define __ASM_ARCH_HARDWARE_INCMACH_H #include "boards.h" diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h index 8e26360ce9a3..57f51ba11251 100644 --- a/arch/arm/mach-integrator/include/mach/hardware.h +++ b/arch/arm/mach-integrator/include/mach/hardware.h @@ -32,7 +32,6 @@ #define IO_SIZE 0x0B000000 // How much? #define IO_START INTEGRATOR_HDR_BASE // PA of IO -#define PCIO_BASE PCI_IO_VADDR #define PCIMEM_BASE PCI_MEMORY_VADDR #define pcibios_assign_all_busses() 1 diff --git a/arch/arm/mach-ixp23xx/include/mach/hardware.h b/arch/arm/mach-ixp23xx/include/mach/hardware.h index c3192009a886..57b508bfe280 100644 --- a/arch/arm/mach-ixp23xx/include/mach/hardware.h +++ b/arch/arm/mach-ixp23xx/include/mach/hardware.h @@ -15,7 +15,6 @@ #define __ASM_ARCH_HARDWARE_H /* PCI IO info */ -#define PCIO_BASE IXP23XX_PCI_IO_VIRT #define PCIBIOS_MIN_IO 0x00000000 #define PCIBIOS_MIN_MEM 0xe0000000 diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 244655d323ea..0629394a5fb9 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -150,9 +150,8 @@ static void __init common_init(void) MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform") .phys_io = APB_PHYS_BASE, - .boot_params = 0x00000100, .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, - .map_io = pxa_map_io, + .map_io = mmp_map_io, .init_irq = pxa168_init_irq, .timer = &pxa168_timer, .init_machine = common_init, @@ -160,9 +159,8 @@ MACHINE_END MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform") .phys_io = APB_PHYS_BASE, - .boot_params = 0x00000100, .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, - .map_io = pxa_map_io, + .map_io = mmp_map_io, .init_irq = pxa168_init_irq, .timer = &pxa168_timer, .init_machine = common_init, diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c index 8c3fa5d14f4b..69bcba11f53f 100644 --- a/arch/arm/mach-mmp/avengers_lite.c +++ b/arch/arm/mach-mmp/avengers_lite.c @@ -42,9 +42,8 @@ static void __init avengers_lite_init(void) MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform") .phys_io = APB_PHYS_BASE, - .boot_params = 0x00000100, .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, - .map_io = pxa_map_io, + .map_io = mmp_map_io, .init_irq = pxa168_init_irq, .timer = &pxa168_timer, .init_machine = avengers_lite_init, diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c index e1e66c18b446..3b29fa7e9b08 100644 --- a/arch/arm/mach-mmp/common.c +++ b/arch/arm/mach-mmp/common.c @@ -31,7 +31,7 @@ static struct map_desc standard_io_desc[] __initdata = { }, }; -void __init pxa_map_io(void) +void __init mmp_map_io(void) { iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); } diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h index b4a0ba05a0f4..ec8d65ded25c 100644 --- a/arch/arm/mach-mmp/common.h +++ b/arch/arm/mach-mmp/common.h @@ -3,15 +3,6 @@ struct sys_timer; extern void timer_init(int irq); -extern void mmp2_clear_pmic_int(void); - -extern struct sys_timer pxa168_timer; -extern struct sys_timer pxa910_timer; -extern struct sys_timer mmp2_timer; -extern void __init pxa168_init_irq(void); -extern void __init pxa910_init_irq(void); -extern void __init mmp2_init_icu(void); -extern void __init mmp2_init_irq(void); extern void __init icu_init_irq(void); -extern void __init pxa_map_io(void); +extern void __init mmp_map_io(void); diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c index 4ec7709a3462..e4312d238eae 100644 --- a/arch/arm/mach-mmp/flint.c +++ b/arch/arm/mach-mmp/flint.c @@ -114,9 +114,8 @@ static void __init flint_init(void) MACHINE_START(FLINT, "Flint Development Platform") .phys_io = APB_PHYS_BASE, - .boot_params = 0x00000100, .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, - .map_io = pxa_map_io, + .map_io = mmp_map_io, .init_irq = mmp2_init_irq, .timer = &mmp2_timer, .init_machine = flint_init, diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/include/mach/devices.h index 1fa0a492454a..d0ec7dae88e4 100644 --- a/arch/arm/mach-mmp/include/mach/devices.h +++ b/arch/arm/mach-mmp/include/mach/devices.h @@ -1,3 +1,6 @@ +#ifndef __MACH_DEVICE_H +#define __MACH_DEVICE_H + #include <linux/types.h> #define MAX_RESOURCE_DMA 2 @@ -47,3 +50,4 @@ struct pxa_device_desc mmp2_device_##_name __initdata = { \ } extern int pxa_register_device(struct pxa_device_desc *, void *, size_t); +#endif /* __MACH_DEVICE_H */ diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h index fec220bd5046..dbba6e8a60c4 100644 --- a/arch/arm/mach-mmp/include/mach/mmp2.h +++ b/arch/arm/mach-mmp/include/mach/mmp2.h @@ -1,6 +1,13 @@ #ifndef __ASM_MACH_MMP2_H #define __ASM_MACH_MMP2_H +struct sys_timer; + +extern struct sys_timer mmp2_timer; +extern void __init mmp2_init_icu(void); +extern void __init mmp2_init_irq(void); +extern void mmp2_clear_pmic_int(void); + #include <linux/i2c.h> #include <mach/devices.h> #include <plat/i2c.h> diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index 3b2bd5d5eb05..27e1bc758623 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -1,6 +1,11 @@ #ifndef __ASM_MACH_PXA168_H #define __ASM_MACH_PXA168_H +struct sys_timer; + +extern struct sys_timer pxa168_timer; +extern void __init pxa168_init_irq(void); + #include <linux/i2c.h> #include <mach/devices.h> #include <plat/i2c.h> diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h index 4f0b4ec6f5d0..f13c49d6f8dc 100644 --- a/arch/arm/mach-mmp/include/mach/pxa910.h +++ b/arch/arm/mach-mmp/include/mach/pxa910.h @@ -1,6 +1,11 @@ #ifndef __ASM_MACH_PXA910_H #define __ASM_MACH_PXA910_H +struct sys_timer; + +extern struct sys_timer pxa910_timer; +extern void __init pxa910_init_irq(void); + #include <linux/i2c.h> #include <mach/devices.h> #include <plat/i2c.h> diff --git a/arch/arm/mach-mmp/irq-mmp2.c b/arch/arm/mach-mmp/irq-mmp2.c index cb18221c0af3..01342be91c3c 100644 --- a/arch/arm/mach-mmp/irq-mmp2.c +++ b/arch/arm/mach-mmp/irq-mmp2.c @@ -16,6 +16,7 @@ #include <linux/io.h> #include <mach/regs-icu.h> +#include <mach/mmp2.h> #include "common.h" diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c index d77dd41d60e1..80c3e7ab1e17 100644 --- a/arch/arm/mach-mmp/jasper.c +++ b/arch/arm/mach-mmp/jasper.c @@ -135,9 +135,8 @@ static void __init jasper_init(void) MACHINE_START(MARVELL_JASPER, "Jasper Development Platform") .phys_io = APB_PHYS_BASE, - .boot_params = 0x00000100, .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, - .map_io = pxa_map_io, + .map_io = mmp_map_io, .init_irq = mmp2_init_irq, .timer = &mmp2_timer, .init_machine = jasper_init, diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 7f5eb059bb01..daf3993349f8 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -17,6 +17,7 @@ #include <asm/hardware/cache-tauros2.h> +#include <asm/mach/time.h> #include <mach/addr-map.h> #include <mach/regs-apbc.h> #include <mach/regs-apmu.h> @@ -26,6 +27,7 @@ #include <mach/mfp.h> #include <mach/gpio.h> #include <mach/devices.h> +#include <mach/mmp2.h> #include "common.h" #include "clock.h" @@ -158,6 +160,26 @@ static int __init mmp2_init(void) } postcore_initcall(mmp2_init); +static void __init mmp2_timer_init(void) +{ + unsigned long clk_rst; + + __raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS); + + /* + * enable bus/functional clock, enable 6.5MHz (divider 4), + * release reset + */ + clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1); + __raw_writel(clk_rst, APBC_MMP2_TIMERS); + + timer_init(IRQ_MMP2_TIMER1); +} + +struct sys_timer mmp2_timer = { + .init = mmp2_timer_init, +}; + /* on-chip devices */ MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5); MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21); diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index 0e0c9220eaba..e81db7428215 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -100,9 +100,8 @@ static void __init tavorevb_init(void) MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)") .phys_io = APB_PHYS_BASE, - .boot_params = 0x00000100, .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, - .map_io = pxa_map_io, + .map_io = mmp_map_io, .init_irq = pxa910_init_irq, .timer = &pxa910_timer, .init_machine = tavorevb_init, diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index cf75694e9687..66528193f939 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -200,24 +200,3 @@ void __init timer_init(int irq) clocksource_register(&cksrc); clockevents_register_device(&ckevt); } - -static void __init mmp2_timer_init(void) -{ - unsigned long clk_rst; - - __raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS); - - /* - * enable bus/functional clock, enable 6.5MHz (divider 4), - * release reset - */ - clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1); - __raw_writel(clk_rst, APBC_MMP2_TIMERS); - - timer_init(IRQ_MMP2_TIMER1); -} - -struct sys_timer mmp2_timer = { - .init = mmp2_timer_init, -}; - diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index b22dec4abf78..ee65e05f0cf1 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -123,9 +123,8 @@ static void __init ttc_dkb_init(void) MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform") .phys_io = APB_PHYS_BASE, - .boot_params = 0x00000100, .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, - .map_io = pxa_map_io, + .map_io = mmp_map_io, .init_irq = pxa910_init_irq, .timer = &pxa910_timer, .init_machine = ttc_dkb_init, diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 3b51741a4810..7aefb9074852 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -238,6 +238,17 @@ config MACH_COLIBRI bool "Toradex Colibri PXA270" select PXA27x +config MACH_COLIBRI_PXA270_EVALBOARD + bool "Toradex Colibri Evaluation Carrier Board support (PXA270)" + depends on MACH_COLIBRI + +config MACH_COLIBRI_PXA270_INCOME + bool "Income s.r.o. PXA270 SBC" + depends on MACH_COLIBRI + select PXA27x + select HAVE_PWM + select PXA_HAVE_BOARD_IRQS + config MACH_COLIBRI300 bool "Toradex Colibri PXA300/310" select PXA3xx @@ -336,6 +347,9 @@ config ARCH_PXA_PALM bool "PXA based Palm PDAs" select HAVE_PWM +config MACH_PALM27X + bool + config MACH_PALMTE2 bool "Palm Tungsten|E2" default y @@ -360,6 +374,7 @@ config MACH_PALMT5 depends on ARCH_PXA_PALM select PXA27x select IWMMXT + select MACH_PALM27X help Say Y here if you intend to run this kernel on a Palm Tungsten|T5 handheld computer. @@ -370,6 +385,7 @@ config MACH_PALMTX depends on ARCH_PXA_PALM select PXA27x select IWMMXT + select MACH_PALM27X help Say Y here if you intend to run this kernel on a Palm T|X handheld computer. @@ -380,6 +396,7 @@ config MACH_PALMZ72 depends on ARCH_PXA_PALM select PXA27x select IWMMXT + select MACH_PALM27X help Say Y here if you intend to run this kernel on Palm Zire 72 handheld computer. @@ -390,6 +407,7 @@ config MACH_PALMLD depends on ARCH_PXA_PALM select PXA27x select IWMMXT + select MACH_PALM27X help Say Y here if you intend to run this kernel on a Palm LifeDrive handheld computer. @@ -447,16 +465,13 @@ config PXA_SHARPSL SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) handheld computer. -config SHARPSL_PM - bool - select APM_EMULATION - select SHARPSL_PM_MAX1111 - -config SHARPSL_PM_MAX1111 - bool - depends on !CORGI_SSP_DEPRECATED - select HWMON - select SENSORS_MAX1111 +config PXA_SHARPSL_DETECT_MACH_ID + bool "Detect machine ID at run-time in the decompressor" + depends on PXA_SHARPSL + help + Say Y here if you want the zImage decompressor to detect + the Zaurus machine ID at run-time. For latest kexec-based + boot loader, this is not necessary. config MACH_POODLE bool "Enable Sharp SL-5600 (Poodle) Support" @@ -510,6 +525,25 @@ config MACH_TOSA select PXA25x select PXA_HAVE_BOARD_IRQS +config TOSA_BT + tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" + depends on MACH_TOSA + select RFKILL + help + This is a simple driver that is able to control + the state of built in bluetooth chip on tosa. + +config TOSA_USE_EXT_KEYCODES + bool "Tosa keyboard: use extended keycodes" + depends on MACH_TOSA + default n + help + Say Y here to enable the tosa keyboard driver to generate extended + (>= 127) keycodes. Be aware, that they can't be correctly interpreted + by either console keyboard driver or by Kdrive keybd driver. + + Say Y only if you know, what you are doing! + config MACH_ICONTROL bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM" select CPU_PXA320 @@ -648,25 +682,15 @@ config PXA_SHARP_Cxx00 help Enable common support for Sharp Cxx00 models -config TOSA_BT - tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" - depends on MACH_TOSA - select RFKILL - help - This is a simple driver that is able to control - the state of built in bluetooth chip on tosa. - -config TOSA_USE_EXT_KEYCODES - bool "Tosa keyboard: use extended keycodes" - depends on MACH_TOSA - default n - help - Say Y here to enable the tosa keyboard driver to generate extended - (>= 127) keycodes. Be aware, that they can't be correctly interpreted - by either console keyboard driver or by Kdrive keybd driver. - - Say Y only if you know, what you are doing! +config SHARPSL_PM + bool + select APM_EMULATION + select SHARPSL_PM_MAX1111 +config SHARPSL_PM_MAX1111 + bool + select HWMON + select SENSORS_MAX1111 config PXA_HAVE_BOARD_IRQS bool diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index b8f1f4bc7ca7..85c7fb324dbb 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -51,14 +51,16 @@ obj-$(CONFIG_MACH_CAPC7117) += capc7117.o mxm8x10.o obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o -obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o +obj-$(CONFIG_MACH_INTELMOTE2) += stargate2.o obj-$(CONFIG_MACH_STARGATE2) += stargate2.o obj-$(CONFIG_MACH_XCEP) += xcep.o obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o obj-$(CONFIG_MACH_PCM027) += pcm027.o obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o -obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o +obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o +obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD) += colibri-pxa270-evalboard.o +obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME) += colibri-pxa270-income.o obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o obj-$(CONFIG_MACH_VPAC270) += vpac270.o @@ -73,6 +75,7 @@ obj-$(CONFIG_PXA_EZX) += ezx.o obj-$(CONFIG_MACH_MP900C) += mp900.o obj-$(CONFIG_MACH_PALMTE2) += palmte2.o obj-$(CONFIG_MACH_PALMTC) += palmtc.o +obj-$(CONFIG_MACH_PALM27X) += palm27x.o obj-$(CONFIG_MACH_PALMT5) += palmt5.o obj-$(CONFIG_MACH_PALMTX) += palmtx.o obj-$(CONFIG_MACH_PALMZ72) += palmz72.o @@ -84,12 +87,6 @@ obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_TOSA) += tosa.o obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o -obj-$(CONFIG_MACH_E330) += e330.o -obj-$(CONFIG_MACH_E350) += e350.o -obj-$(CONFIG_MACH_E740) += e740.o -obj-$(CONFIG_MACH_E750) += e750.o -obj-$(CONFIG_MACH_E400) += e400.o -obj-$(CONFIG_MACH_E800) += e800.o obj-$(CONFIG_MACH_RAUMFELD_RC) += raumfeld.o obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index f3b5ace815e5..9041340fee1d 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -22,9 +22,14 @@ #include <linux/fb.h> #include <linux/gpio.h> #include <linux/ioport.h> +#include <linux/ucb1400.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/types.h> +#include <linux/i2c/pcf857x.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/physmap.h> +#include <linux/regulator/max1586.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -51,6 +56,59 @@ #include "generic.h" #include "devices.h" +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static unsigned long balloon3_pin_config[] __initdata = { + /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_BTUART_RTS, + + /* Reset, configured as GPIO wakeup source */ + GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, + + /* LEDs */ + GPIO9_GPIO, /* NAND activity LED */ + GPIO10_GPIO, /* Heartbeat LED */ + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + GPIO113_AC97_nRESET, + GPIO95_GPIO, + + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + + /* USB Host */ + GPIO88_USBH1_PWR, + GPIO89_USBH1_PEN, + + /* PC Card */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO85_nPCE_1, + GPIO54_nPCE_2, + GPIO79_PSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, +}; + +/****************************************************************************** + * Compatibility: Parameter parsing + ******************************************************************************/ static unsigned long balloon3_irq_enabled; static unsigned long balloon3_features_present = @@ -73,6 +131,321 @@ int __init parse_balloon3_features(char *arg) } early_param("balloon3_features", parse_balloon3_features); +/****************************************************************************** + * NOR Flash + ******************************************************************************/ +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static struct mtd_partition balloon3_nor_partitions[] = { + { + .name = "Flash", + .offset = 0x00000000, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct physmap_flash_data balloon3_flash_data[] = { + { + .width = 2, /* bankwidth in bytes */ + .parts = balloon3_nor_partitions, + .nr_parts = ARRAY_SIZE(balloon3_nor_partitions) + } +}; + +static struct resource balloon3_flash_resource = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device balloon3_flash = { + .name = "physmap-flash", + .id = 0, + .resource = &balloon3_flash_resource, + .num_resources = 1, + .dev = { + .platform_data = balloon3_flash_data, + }, +}; +static void __init balloon3_nor_init(void) +{ + platform_device_register(&balloon3_flash); +} +#else +static inline void balloon3_nor_init(void) {} +#endif + +/****************************************************************************** + * Audio and Touchscreen + ******************************************************************************/ +#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \ + defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) +static struct ucb1400_pdata vpac270_ucb1400_pdata = { + .irq = IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ), +}; + + +static struct platform_device balloon3_ucb1400_device = { + .name = "ucb1400_core", + .id = -1, + .dev = { + .platform_data = &vpac270_ucb1400_pdata, + }, +}; + +static void __init balloon3_ts_init(void) +{ + if (!balloon3_has(BALLOON3_FEATURE_AUDIO)) + return; + + pxa_set_ac97_info(NULL); + platform_device_register(&balloon3_ucb1400_device); +} +#else +static inline void balloon3_ts_init(void) {} +#endif + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static struct pxafb_mode_info balloon3_lcd_modes[] = { + { + .pixclock = 38000, + .xres = 480, + .yres = 640, + .bpp = 16, + .hsync_len = 8, + .left_margin = 8, + .right_margin = 8, + .vsync_len = 2, + .upper_margin = 4, + .lower_margin = 5, + .sync = 0, + }, +}; + +static struct pxafb_mach_info balloon3_lcd_screen = { + .modes = balloon3_lcd_modes, + .num_modes = ARRAY_SIZE(balloon3_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +}; + +static void balloon3_backlight_power(int on) +{ + gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on); +} + +static void __init balloon3_lcd_init(void) +{ + int ret; + + if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY)) + return; + + ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON"); + if (ret) { + pr_err("Requesting BKL-ON GPIO failed!\n"); + goto err; + } + + ret = gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1); + if (ret) { + pr_err("Setting BKL-ON GPIO direction failed!\n"); + goto err2; + } + + balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power; + set_pxa_fb_info(&balloon3_lcd_screen); + return; + +err2: + gpio_free(BALLOON3_GPIO_RUN_BACKLIGHT); +err: + return; +} +#else +static inline void balloon3_lcd_init(void) {} +#endif + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +static struct pxamci_platform_data balloon3_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .gpio_card_detect = -1, + .gpio_card_ro = -1, + .gpio_power = -1, + .detect_delay_ms = 200, +}; + +static void __init balloon3_mmc_init(void) +{ + pxa_set_mci_info(&balloon3_mci_platform_data); +} +#else +static inline void balloon3_mmc_init(void) {} +#endif + +/****************************************************************************** + * USB Gadget + ******************************************************************************/ +#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE) +static void balloon3_udc_command(int cmd) +{ + if (cmd == PXA2XX_UDC_CMD_CONNECT) + UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE; + else if (cmd == PXA2XX_UDC_CMD_DISCONNECT) + UP2OCR &= ~UP2OCR_DPPUE; +} + +static int balloon3_udc_is_connected(void) +{ + return 1; +} + +static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = { + .udc_command = balloon3_udc_command, + .udc_is_connected = balloon3_udc_is_connected, + .gpio_pullup = -1, +}; + +static void __init balloon3_udc_init(void) +{ + pxa_set_udc_info(&balloon3_udc_info); + platform_device_register(&balloon3_gpio_vbus); +} +#else +static inline void balloon3_udc_init(void) {} +#endif + +/****************************************************************************** + * IrDA + ******************************************************************************/ +#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE) +static struct pxaficp_platform_data balloon3_ficp_platform_data = { + .transceiver_cap = IR_FIRMODE | IR_SIRMODE | IR_OFF, +}; + +static void __init balloon3_irda_init(void) +{ + pxa_set_ficp_info(&balloon3_ficp_platform_data); +} +#else +static inline void balloon3_irda_init(void) {} +#endif + +/****************************************************************************** + * USB Host + ******************************************************************************/ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static struct pxaohci_platform_data balloon3_ohci_info = { + .port_mode = PMM_PERPORT_MODE, + .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW, +}; + +static void __init balloon3_uhc_init(void) +{ + if (!balloon3_has(BALLOON3_FEATURE_OHCI)) + return; + pxa_set_ohci_info(&balloon3_ohci_info); +} +#else +static inline void balloon3_uhc_init(void) {} +#endif + +/****************************************************************************** + * LEDs + ******************************************************************************/ +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +struct gpio_led balloon3_gpio_leds[] = { + { + .name = "balloon3:green:idle", + .default_trigger = "heartbeat", + .gpio = BALLOON3_GPIO_LED_IDLE, + .active_low = 1, + }, { + .name = "balloon3:green:nand", + .default_trigger = "nand-disk", + .gpio = BALLOON3_GPIO_LED_NAND, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data balloon3_gpio_led_info = { + .leds = balloon3_gpio_leds, + .num_leds = ARRAY_SIZE(balloon3_gpio_leds), +}; + +static struct platform_device balloon3_leds = { + .name = "leds-gpio", + .id = 0, + .dev = { + .platform_data = &balloon3_gpio_led_info, + } +}; + +struct gpio_led balloon3_pcf_gpio_leds[] = { + { + .name = "balloon3:green:led0", + .gpio = BALLOON3_PCF_GPIO_LED0, + .active_low = 1, + }, { + .name = "balloon3:green:led1", + .gpio = BALLOON3_PCF_GPIO_LED1, + .active_low = 1, + }, { + .name = "balloon3:orange:led2", + .gpio = BALLOON3_PCF_GPIO_LED2, + .active_low = 1, + }, { + .name = "balloon3:orange:led3", + .gpio = BALLOON3_PCF_GPIO_LED3, + .active_low = 1, + }, { + .name = "balloon3:orange:led4", + .gpio = BALLOON3_PCF_GPIO_LED4, + .active_low = 1, + }, { + .name = "balloon3:orange:led5", + .gpio = BALLOON3_PCF_GPIO_LED5, + .active_low = 1, + }, { + .name = "balloon3:red:led6", + .gpio = BALLOON3_PCF_GPIO_LED6, + .active_low = 1, + }, { + .name = "balloon3:red:led7", + .gpio = BALLOON3_PCF_GPIO_LED7, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data balloon3_pcf_gpio_led_info = { + .leds = balloon3_pcf_gpio_leds, + .num_leds = ARRAY_SIZE(balloon3_pcf_gpio_leds), +}; + +static struct platform_device balloon3_pcf_leds = { + .name = "leds-gpio", + .id = 1, + .dev = { + .platform_data = &balloon3_pcf_gpio_led_info, + } +}; + +static void __init balloon3_leds_init(void) +{ + platform_device_register(&balloon3_leds); + platform_device_register(&balloon3_pcf_leds); +} +#else +static inline void balloon3_leds_init(void) {} +#endif + +/****************************************************************************** + * FPGA IRQ + ******************************************************************************/ static void balloon3_mask_irq(unsigned int irq) { int balloon3_irq = (irq - BALLOON3_IRQ(0)); @@ -98,7 +471,6 @@ static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc) { unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) & balloon3_irq_enabled; - do { /* clear useless edge notification */ if (desc->chip->ack) @@ -132,201 +504,259 @@ static void __init balloon3_init_irq(void) "enabled\n", __func__, BALLOON3_AUX_NIRQ); } -static unsigned long balloon3_ac97_pin_config[] = { - GPIO28_AC97_BITCLK, - GPIO29_AC97_SDATA_IN_0, - GPIO30_AC97_SDATA_OUT, - GPIO31_AC97_SYNC, - GPIO113_AC97_nRESET, -}; - -static void balloon3_backlight_power(int on) -{ - pr_debug("%s: power is %s\n", __func__, on ? "on" : "off"); - gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on); -} - -static unsigned long balloon3_lcd_pin_config[] = { - /* LCD - 16bpp Active TFT */ - GPIOxx_LCD_TFT_16BPP, - - GPIO99_GPIO, /* Backlight */ +/****************************************************************************** + * GPIO expander + ******************************************************************************/ +#if defined(CONFIG_GPIO_PCF857X) || defined(CONFIG_GPIO_PCF857X_MODULE) +static struct pcf857x_platform_data balloon3_pcf857x_pdata = { + .gpio_base = BALLOON3_PCF_GPIO_BASE, + .n_latch = 0, + .setup = NULL, + .teardown = NULL, + .context = NULL, }; -static struct pxafb_mode_info balloon3_lcd_modes[] = { +static struct i2c_board_info __initdata balloon3_i2c_devs[] = { { - .pixclock = 38000, - .xres = 480, - .yres = 640, - .bpp = 16, - .hsync_len = 8, - .left_margin = 8, - .right_margin = 8, - .vsync_len = 2, - .upper_margin = 4, - .lower_margin = 5, - .sync = 0, + I2C_BOARD_INFO("pcf8574a", 0x38), + .platform_data = &balloon3_pcf857x_pdata, }, }; -static struct pxafb_mach_info balloon3_pxafb_info = { - .modes = balloon3_lcd_modes, - .num_modes = ARRAY_SIZE(balloon3_lcd_modes), - .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, - .pxafb_backlight_power = balloon3_backlight_power, -}; +static void __init balloon3_i2c_init(void) +{ + pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(balloon3_i2c_devs)); +} +#else +static inline void balloon3_i2c_init(void) {} +#endif + +/****************************************************************************** + * NAND + ******************************************************************************/ +#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE) +static uint16_t balloon3_ctl = + BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 | + BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 | + BALLOON3_NAND_CONTROL_FLWP; + +static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; -static unsigned long balloon3_mmc_pin_config[] = { - GPIO32_MMC_CLK, - GPIO92_MMC_DAT_0, - GPIO109_MMC_DAT_1, - GPIO110_MMC_DAT_2, - GPIO111_MMC_DAT_3, - GPIO112_MMC_CMD, -}; + if (ctrl & NAND_CTRL_CHANGE) { + if (ctrl & NAND_CLE) + balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCLE; + else + balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLCLE; -static void balloon3_mci_setpower(struct device *dev, unsigned int vdd) -{ - struct pxamci_platform_data *p_d = dev->platform_data; - - if ((1 << vdd) & p_d->ocr_mask) { - pr_debug("%s: on\n", __func__); - /* FIXME something to prod here? */ - } else { - pr_debug("%s: off\n", __func__); - /* FIXME something to prod here? */ + if (ctrl & NAND_ALE) + balloon3_ctl |= BALLOON3_NAND_CONTROL_FLALE; + else + balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLALE; + + __raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG); } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); } -static struct pxamci_platform_data balloon3_mci_platform_data = { - .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .setpower = balloon3_mci_setpower, -}; +static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip) +{ + if (chip < 0 || chip > 3) + return; -static int balloon3_udc_is_connected(void) + balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCE0 | + BALLOON3_NAND_CONTROL_FLCE1 | + BALLOON3_NAND_CONTROL_FLCE2 | + BALLOON3_NAND_CONTROL_FLCE3; + + /* Deassert correct nCE line */ + balloon3_ctl &= ~(BALLOON3_NAND_CONTROL_FLCE0 << chip); + + __raw_writew(balloon3_ctl, BALLOON3_NAND_CONTROL_REG); +} + +static int balloon3_nand_probe(struct platform_device *pdev) { - pr_debug("%s: udc connected\n", __func__); - return 1; + void __iomem *temp_map; + uint16_t ver; + int ret; + + __raw_writew(BALLOON3_NAND_CONTROL2_16BIT, BALLOON3_NAND_CONTROL2_REG); + + ver = __raw_readw(BALLOON3_FPGA_VER); + if (ver > 0x0201) + pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. " + "NAND support might be broken in this version!", ver); + + /* Power up the NAND chips */ + ret = gpio_request(BALLOON3_GPIO_RUN_NAND, "NAND"); + if (ret) + goto err1; + + ret = gpio_direction_output(BALLOON3_GPIO_RUN_NAND, 1); + if (ret) + goto err2; + + gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1); + + /* Deassert all nCE lines and write protect line */ + __raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG); + return 0; + +err2: + gpio_free(BALLOON3_GPIO_RUN_NAND); +err1: + return ret; } -static void balloon3_udc_command(int cmd) +static void balloon3_nand_remove(struct platform_device *pdev) { - switch (cmd) { - case PXA2XX_UDC_CMD_CONNECT: - UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE); - pr_debug("%s: connect\n", __func__); - break; - case PXA2XX_UDC_CMD_DISCONNECT: - UP2OCR &= ~UP2OCR_DPPUE; - pr_debug("%s: disconnect\n", __func__); - break; - } + /* Power down the NAND chips */ + gpio_set_value(BALLOON3_GPIO_RUN_NAND, 0); + gpio_free(BALLOON3_GPIO_RUN_NAND); } -static struct pxa2xx_udc_mach_info balloon3_udc_info = { - .udc_is_connected = balloon3_udc_is_connected, - .udc_command = balloon3_udc_command, +static struct mtd_partition balloon3_partition_info[] = { + [0] = { + .name = "Boot", + .offset = 0, + .size = SZ_4M, + }, + [1] = { + .name = "RootFS", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL + }, }; -static struct pxaficp_platform_data balloon3_ficp_platform_data = { - .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, -}; +static const char *balloon3_part_probes[] = { "cmdlinepart", NULL }; -static unsigned long balloon3_ohci_pin_config[] = { - GPIO88_USBH1_PWR, - GPIO89_USBH1_PEN, +struct platform_nand_data balloon3_nand_pdata = { + .chip = { + .nr_chips = 4, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(balloon3_partition_info), + .partitions = balloon3_partition_info, + .chip_delay = 50, + .part_probe_types = balloon3_part_probes, + }, + .ctrl = { + .hwcontrol = 0, + .dev_ready = 0, + .select_chip = balloon3_nand_select_chip, + .cmd_ctrl = balloon3_nand_cmd_ctl, + .probe = balloon3_nand_probe, + .remove = balloon3_nand_remove, + }, }; -static struct pxaohci_platform_data balloon3_ohci_platform_data = { - .port_mode = PMM_PERPORT_MODE, - .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW, +static struct resource balloon3_nand_resource[] = { + [0] = { + .start = BALLOON3_NAND_BASE, + .end = BALLOON3_NAND_BASE + 0x4, + .flags = IORESOURCE_MEM, + }, }; -static unsigned long balloon3_pin_config[] __initdata = { - /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */ - GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, - GPIO44_BTUART_CTS, - GPIO45_BTUART_RTS, - - /* Wakeup GPIO */ - GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, - - /* NAND & IDLE LED GPIOs */ - GPIO9_GPIO, - GPIO10_GPIO, +static struct platform_device balloon3_nand = { + .name = "gen_nand", + .num_resources = ARRAY_SIZE(balloon3_nand_resource), + .resource = balloon3_nand_resource, + .id = -1, + .dev = { + .platform_data = &balloon3_nand_pdata, + } }; -static struct gpio_led balloon3_gpio_leds[] = { +static void __init balloon3_nand_init(void) +{ + platform_device_register(&balloon3_nand); +} +#else +static inline void balloon3_nand_init(void) {} +#endif + +/****************************************************************************** + * Core power regulator + ******************************************************************************/ +#if defined(CONFIG_REGULATOR_MAX1586) || \ + defined(CONFIG_REGULATOR_MAX1586_MODULE) +static struct regulator_consumer_supply balloon3_max1587a_consumers[] = { { - .name = "balloon3:green:idle", - .default_trigger = "heartbeat", - .gpio = BALLOON3_GPIO_LED_IDLE, - .active_low = 1, + .supply = "vcc_core", + } +}; + +static struct regulator_init_data balloon3_max1587a_v3_info = { + .constraints = { + .name = "vcc_core range", + .min_uV = 900000, + .max_uV = 1705000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, }, + .consumer_supplies = balloon3_max1587a_consumers, + .num_consumer_supplies = ARRAY_SIZE(balloon3_max1587a_consumers), +}; + +static struct max1586_subdev_data balloon3_max1587a_subdevs[] = { { - .name = "balloon3:green:nand", - .default_trigger = "nand-disk", - .gpio = BALLOON3_GPIO_LED_NAND, - .active_low = 1, - }, + .name = "vcc_core", + .id = MAX1586_V3, + .platform_data = &balloon3_max1587a_v3_info, + } }; -static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = { - .leds = balloon3_gpio_leds, - .num_leds = ARRAY_SIZE(balloon3_gpio_leds), +static struct max1586_platform_data balloon3_max1587a_info = { + .subdevs = balloon3_max1587a_subdevs, + .num_subdevs = ARRAY_SIZE(balloon3_max1587a_subdevs), + .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */ }; -static struct platform_device balloon3led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &balloon3_gpio_leds_platform_data, +static struct i2c_board_info __initdata balloon3_pi2c_board_info[] = { + { + I2C_BOARD_INFO("max1586", 0x14), + .platform_data = &balloon3_max1587a_info, }, }; -static void __init balloon3_init(void) +static void __init balloon3_pmic_init(void) { - pr_info("Initialising Balloon3\n"); + pxa27x_set_i2c_power_info(NULL); + i2c_register_board_info(1, ARRAY_AND_SIZE(balloon3_pi2c_board_info)); +} +#else +static inline void balloon3_pmic_init(void) {} +#endif - /* system bus arbiter setting - * - Core_Park - * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4 - */ +/****************************************************************************** + * Machine init + ******************************************************************************/ +static void __init balloon3_init(void) +{ ARB_CNTRL = ARB_CORE_PARK | 0x234; + pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config)); + pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - pxa_set_i2c_info(NULL); - if (balloon3_has(BALLOON3_FEATURE_AUDIO)) { - pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config)); - pxa_set_ac97_info(NULL); - } - - if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) { - pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config)); - gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, - "LCD Backlight Power"); - gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1); - set_pxa_fb_info(&balloon3_pxafb_info); - } - - if (balloon3_has(BALLOON3_FEATURE_MMC)) { - pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config)); - pxa_set_mci_info(&balloon3_mci_platform_data); - } - pxa_set_ficp_info(&balloon3_ficp_platform_data); - if (balloon3_has(BALLOON3_FEATURE_OHCI)) { - pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ohci_pin_config)); - pxa_set_ohci_info(&balloon3_ohci_platform_data); - } - pxa_set_udc_info(&balloon3_udc_info); - - pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config)); - - platform_device_register(&balloon3led_device); + balloon3_i2c_init(); + balloon3_irda_init(); + balloon3_lcd_init(); + balloon3_leds_init(); + balloon3_mmc_init(); + balloon3_nand_init(); + balloon3_nor_init(); + balloon3_pmic_init(); + balloon3_ts_init(); + balloon3_udc_init(); + balloon3_uhc_init(); } static struct map_desc balloon3_io_desc[] __initdata = { diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index fdda6be6c391..c70e6c2f4e7c 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -689,6 +689,7 @@ static void __init cm_x300_init_da9030(void) { pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info); i2c_register_board_info(1, &cm_x300_pmic_info, 1); + set_irq_wake(IRQ_WAKEUP0, 1); } static void __init cm_x300_init_wi2wi(void) @@ -745,9 +746,10 @@ static void __init cm_x300_init(void) { cm_x300_init_mfp(); - pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); + if (cpu_is_pxa300()) + pxa_set_ffuart_info(NULL); cm_x300_init_da9030(); cm_x300_init_dm9000(); diff --git a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c new file mode 100644 index 000000000000..0f3b632c3b14 --- /dev/null +++ b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c @@ -0,0 +1,111 @@ +/* + * linux/arch/arm/mach-pxa/colibri-pxa270-evalboard.c + * + * Support for Toradex PXA270 based Colibri Evaluation Carrier Board + * Daniel Mack <daniel@caiaq.de> + * Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/sysdev.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <mach/hardware.h> +#include <asm/mach/arch.h> + +#include <mach/pxa27x.h> +#include <mach/colibri.h> +#include <mach/mmc.h> +#include <mach/ohci.h> +#include <mach/pxa27x-udc.h> + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = { + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + GPIO0_GPIO, /* SD detect */ + + /* FFUART */ + GPIO39_FFUART_TXD, + GPIO34_FFUART_RXD, + + /* UHC */ + GPIO88_USBH1_PWR, + GPIO89_USBH1_PEN, + GPIO119_USBH2_PWR, + GPIO120_USBH2_PEN, +}; + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +static struct pxamci_platform_data colibri_pxa270_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .gpio_power = -1, + .gpio_card_detect = GPIO0_COLIBRI_PXA270_SD_DETECT, + .gpio_card_ro = -1, + .detect_delay_ms = 200, +}; + +static void __init colibri_pxa270_mmc_init(void) +{ + pxa_set_mci_info(&colibri_pxa270_mci_platform_data); +} +#else +static inline void colibri_pxa270_mmc_init(void) {} +#endif + +/****************************************************************************** + * USB Host + ******************************************************************************/ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static int colibri_pxa270_ohci_init(struct device *dev) +{ + UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE; + return 0; +} + +static struct pxaohci_platform_data colibri_pxa270_ohci_info = { + .port_mode = PMM_PERPORT_MODE, + .flags = ENABLE_PORT1 | ENABLE_PORT2 | + POWER_CONTROL_LOW | POWER_SENSE_LOW, + .init = colibri_pxa270_ohci_init, +}; + +static void __init colibri_pxa270_uhc_init(void) +{ + pxa_set_ohci_info(&colibri_pxa270_ohci_info); +} +#else +static inline void colibri_pxa270_uhc_init(void) {} +#endif + +void __init colibri_pxa270_evalboard_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_evalboard_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + + colibri_pxa270_mmc_init(); + colibri_pxa270_uhc_init(); +} + diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c new file mode 100644 index 000000000000..37f0f3ed7c61 --- /dev/null +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -0,0 +1,272 @@ +/* + * linux/arch/arm/mach-pxa/income.c + * + * Support for Income s.r.o. SH-Dmaster PXA270 SBC + * + * Copyright (C) 2010 + * Marek Vasut <marek.vasut@gmail.com> + * Pavel Revak <palo@bielyvlk.sk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/pwm_backlight.h> +#include <linux/sysdev.h> + +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <mach/hardware.h> +#include <mach/mmc.h> +#include <mach/ohci.h> +#include <mach/pxa27x.h> +#include <mach/pxa27x-udc.h> +#include <mach/pxafb.h> + +#include <plat/i2c.h> + +#include "devices.h" +#include "generic.h" + +#define GPIO114_INCOME_ETH_IRQ (114) +#define GPIO0_INCOME_SD_DETECT (0) +#define GPIO0_INCOME_SD_RO (1) +#define GPIO54_INCOME_LED_A (54) +#define GPIO55_INCOME_LED_B (55) +#define GPIO113_INCOME_TS_IRQ (113) + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static mfp_cfg_t income_pin_config[] __initdata = { + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + GPIO0_GPIO, /* SD detect */ + GPIO1_GPIO, /* SD read-only */ + + /* FFUART */ + GPIO39_FFUART_TXD, + GPIO34_FFUART_RXD, + + /* BFUART */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO45_BTUART_RTS, + + /* STUART */ + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, + + /* UHC */ + GPIO88_USBH1_PWR, + GPIO89_USBH1_PEN, + + /* LCD */ + GPIOxx_LCD_TFT_16BPP, + + /* PWM */ + GPIO16_PWM0_OUT, + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, + + /* LED */ + GPIO54_GPIO, /* LED A */ + GPIO55_GPIO, /* LED B */ +}; + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +static struct pxamci_platform_data income_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .gpio_power = -1, + .gpio_card_detect = GPIO0_INCOME_SD_DETECT, + .gpio_card_ro = GPIO0_INCOME_SD_RO, + .detect_delay_ms = 200, +}; + +static void __init income_mmc_init(void) +{ + pxa_set_mci_info(&income_mci_platform_data); +} +#else +static inline void income_mmc_init(void) {} +#endif + +/****************************************************************************** + * USB Host + ******************************************************************************/ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static struct pxaohci_platform_data income_ohci_info = { + .port_mode = PMM_PERPORT_MODE, + .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW, +}; + +static void __init income_uhc_init(void) +{ + pxa_set_ohci_info(&income_ohci_info); +} +#else +static inline void income_uhc_init(void) {} +#endif + +/****************************************************************************** + * LED + ******************************************************************************/ +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +struct gpio_led income_gpio_leds[] = { + { + .name = "income:green:leda", + .default_trigger = "none", + .gpio = GPIO54_INCOME_LED_A, + .active_low = 1, + }, + { + .name = "income:green:ledb", + .default_trigger = "none", + .gpio = GPIO55_INCOME_LED_B, + .active_low = 1, + } +}; + +static struct gpio_led_platform_data income_gpio_led_info = { + .leds = income_gpio_leds, + .num_leds = ARRAY_SIZE(income_gpio_leds), +}; + +static struct platform_device income_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &income_gpio_led_info, + } +}; + +static void __init income_led_init(void) +{ + platform_device_register(&income_leds); +} +#else +static inline void income_led_init(void) {} +#endif + +/****************************************************************************** + * I2C + ******************************************************************************/ +#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE) +static struct i2c_board_info __initdata income_i2c_devs[] = { + { + I2C_BOARD_INFO("ds1340", 0x68), + }, { + I2C_BOARD_INFO("lm75", 0x4f), + }, +}; + +static void __init income_i2c_init(void) +{ + pxa_set_i2c_info(NULL); + pxa27x_set_i2c_power_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs)); +} +#else +static inline void income_i2c_init(void) {} +#endif + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static struct pxafb_mode_info income_lcd_modes[] = { +{ + .pixclock = 144700, + .xres = 320, + .yres = 240, + .bpp = 32, + .depth = 18, + + .left_margin = 10, + .right_margin = 10, + .upper_margin = 7, + .lower_margin = 8, + + .hsync_len = 20, + .vsync_len = 2, + + .sync = FB_SYNC_VERT_HIGH_ACT, +}, +}; + +static struct pxafb_mach_info income_lcd_screen = { + .modes = income_lcd_modes, + .num_modes = ARRAY_SIZE(income_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL, +}; + +static void __init income_lcd_init(void) +{ + set_pxa_fb_info(&income_lcd_screen); +} +#else +static inline void income_lcd_init(void) {} +#endif + +/****************************************************************************** + * Backlight + ******************************************************************************/ +#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM__MODULE) +static struct platform_pwm_backlight_data income_backlight_data = { + .pwm_id = 0, + .max_brightness = 0x3ff, + .dft_brightness = 0x1ff, + .pwm_period_ns = 1000000, +}; + +static struct platform_device income_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &income_backlight_data, + }, +}; + +static void __init income_pwm_init(void) +{ + platform_device_register(&income_backlight); +} +#else +static inline void income_pwm_init(void) {} +#endif + +void __init colibri_pxa270_income_boardinit(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + + income_mmc_init(); + income_uhc_init(); + income_led_init(); + income_i2c_init(); + income_lcd_init(); + income_pwm_init(); +} + diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 061c45316de8..98673ac6efd0 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -3,6 +3,7 @@ * * Support for Toradex PXA270 based Colibri module * Daniel Mack <daniel@caiaq.de> + * Marek Vasut <marek.vasut@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -10,49 +11,55 @@ */ #include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/sysdev.h> #include <linux/interrupt.h> -#include <linux/bitops.h> -#include <linux/ioport.h> -#include <linux/delay.h> +#include <linux/kernel.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> -#include <linux/gpio.h> -#include <asm/mach-types.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/sizes.h> +#include <linux/platform_device.h> +#include <linux/sysdev.h> +#include <linux/ucb1400.h> + #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> #include <asm/mach/flash.h> +#include <asm/mach-types.h> +#include <asm/sizes.h> -#include <mach/pxa27x.h> +#include <mach/audio.h> #include <mach/colibri.h> +#include <mach/pxa27x.h> -#include "generic.h" #include "devices.h" +#include "generic.h" -/* - * GPIO configuration - */ +/****************************************************************************** + * Pin configuration + ******************************************************************************/ static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = { + /* Ethernet */ GPIO78_nCS_2, /* Ethernet CS */ GPIO114_GPIO, /* Ethernet IRQ */ + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + GPIO95_AC97_nRESET, + GPIO98_AC97_SYSCLK, + GPIO113_GPIO, /* Touchscreen IRQ */ }; -/* - * NOR flash - */ +/****************************************************************************** + * NOR Flash + ******************************************************************************/ +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition colibri_partitions[] = { { .name = "Bootloader", .offset = 0x00000000, .size = 0x00040000, - .mask_flags = MTD_WRITEABLE /* force read-only */ + .mask_flags = MTD_WRITEABLE /* force read-only */ }, { .name = "Kernel", .offset = 0x00040000, @@ -90,50 +97,113 @@ static struct platform_device colibri_pxa270_flash_device = { .num_resources = 1, }; -/* - * DM9000 Ethernet - */ -#if defined(CONFIG_DM9000) -static struct resource dm9000_resources[] = { - [0] = { - .start = COLIBRI_PXA270_ETH_PHYS, - .end = COLIBRI_PXA270_ETH_PHYS + 3, +static void __init colibri_pxa270_nor_init(void) +{ + platform_device_register(&colibri_pxa270_flash_device); +} +#else +static inline void colibri_pxa270_nor_init(void) {} +#endif + +/****************************************************************************** + * Ethernet + ******************************************************************************/ +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +static struct resource colibri_pxa270_dm9000_resources[] = { + { + .start = PXA_CS2_PHYS, + .end = PXA_CS2_PHYS + 3, .flags = IORESOURCE_MEM, }, - [1] = { - .start = COLIBRI_PXA270_ETH_PHYS + 4, - .end = COLIBRI_PXA270_ETH_PHYS + 4 + 500, + { + .start = PXA_CS2_PHYS + 4, + .end = PXA_CS2_PHYS + 4 + 500, .flags = IORESOURCE_MEM, }, - [2] = { - .start = COLIBRI_PXA270_ETH_IRQ, - .end = COLIBRI_PXA270_ETH_IRQ, + { + .start = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ), + .end = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING, }, }; -static struct platform_device dm9000_device = { +static struct platform_device colibri_pxa270_dm9000_device = { .name = "dm9000", .id = -1, - .num_resources = ARRAY_SIZE(dm9000_resources), - .resource = dm9000_resources, + .num_resources = ARRAY_SIZE(colibri_pxa270_dm9000_resources), + .resource = colibri_pxa270_dm9000_resources, }; -#endif /* CONFIG_DM9000 */ -static struct platform_device *colibri_pxa270_devices[] __initdata = { - &colibri_pxa270_flash_device, -#if defined(CONFIG_DM9000) - &dm9000_device, +static void __init colibri_pxa270_eth_init(void) +{ + platform_device_register(&colibri_pxa270_dm9000_device); +} +#else +static inline void colibri_pxa270_eth_init(void) {} #endif + +/****************************************************************************** + * Audio and Touchscreen + ******************************************************************************/ +#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \ + defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) +static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = { + .reset_gpio = 95, +}; + +static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = { + .irq = gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ), +}; + +static struct platform_device colibri_pxa270_ucb1400_device = { + .name = "ucb1400_core", + .id = -1, + .dev = { + .platform_data = &colibri_pxa270_ucb1400_pdata, + }, }; +static void __init colibri_pxa270_tsc_init(void) +{ + pxa_set_ac97_info(&colibri_pxa270_ac97_pdata); + platform_device_register(&colibri_pxa270_ucb1400_device); +} +#else +static inline void colibri_pxa270_tsc_init(void) {} +#endif + +static int colibri_pxa270_baseboard; +core_param(colibri_pxa270_baseboard, colibri_pxa270_baseboard, int, 0444); + static void __init colibri_pxa270_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config)); - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices)); + + colibri_pxa270_nor_init(); + colibri_pxa270_eth_init(); + colibri_pxa270_tsc_init(); + + switch (colibri_pxa270_baseboard) { + case COLIBRI_PXA270_EVALBOARD: + colibri_pxa270_evalboard_init(); + break; + case COLIBRI_PXA270_INCOME: + colibri_pxa270_income_boardinit(); + break; + default: + printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n", + colibri_pxa270_baseboard); + } +} + +/* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either + * with the INCOME mach type or with COLIBRI and the kernel parameter + * "colibri_pxa270_baseboard=1" + */ +static void __init colibri_pxa270_income_init(void) +{ + colibri_pxa270_baseboard = COLIBRI_PXA270_INCOME; + colibri_pxa270_init(); } MACHINE_START(COLIBRI, "Toradex Colibri PXA270") @@ -146,3 +216,13 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270") .timer = &pxa_timer, MACHINE_END +MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .init_machine = colibri_pxa270_income_init, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, +MACHINE_END + diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index ae835fad7d10..99e850d84710 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/interrupt.h> +#include <linux/usb/gpio_vbus.h> #include <asm/mach-types.h> #include <asm/sizes.h> @@ -28,6 +29,8 @@ #include <mach/pxafb.h> #include <mach/ohci.h> #include <mach/audio.h> +#include <mach/pxa27x-udc.h> +#include <mach/udc.h> #include "generic.h" #include "devices.h" @@ -101,6 +104,42 @@ void __init colibri_pxa320_init_ohci(void) static inline void colibri_pxa320_init_ohci(void) {} #endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */ +#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE) +static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = { + .gpio_vbus = mfp_to_gpio(MFP_PIN_GPIO96), + .gpio_pullup = -1, +}; + +static struct platform_device colibri_pxa320_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &colibri_pxa320_gpio_vbus_info, + }, +}; + +static void colibri_pxa320_udc_command(int cmd) +{ + if (cmd == PXA2XX_UDC_CMD_CONNECT) + UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE; + else if (cmd == PXA2XX_UDC_CMD_DISCONNECT) + UP2OCR = UP2OCR_HXOE; +} + +static struct pxa2xx_udc_mach_info colibri_pxa320_udc_info __initdata = { + .udc_command = colibri_pxa320_udc_command, + .gpio_pullup = -1, +}; + +static void __init colibri_pxa320_init_udc(void) +{ + pxa_set_udc_info(&colibri_pxa320_udc_info); + platform_device_register(&colibri_pxa320_gpio_vbus); +} +#else +static inline void colibri_pxa320_init_udc(void) {} +#endif + static mfp_cfg_t colibri_pxa320_mmc_pin_config[] __initdata = { GPIO22_MMC1_CLK, GPIO23_MMC1_CMD, @@ -212,6 +251,7 @@ void __init colibri_pxa320_init(void) colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config), mfp_to_gpio(MFP_PIN_GPIO28)); colibri_pxa320_init_uart(); + colibri_pxa320_init_udc(); } MACHINE_START(COLIBRI320, "Toradex Colibri PXA320") diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 461ba4080155..3fb0fc099080 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -50,14 +50,13 @@ #include <mach/udc.h> #include <mach/pxa2xx_spi.h> #include <mach/corgi.h> -#include <mach/sharpsl.h> +#include <mach/sharpsl_pm.h> #include <asm/mach/sharpsl_param.h> #include <asm/hardware/scoop.h> #include "generic.h" #include "devices.h" -#include "sharpsl.h" static unsigned long corgi_pin_config[] __initdata = { /* Static Memory I/O */ @@ -185,8 +184,6 @@ static struct scoop_pcmcia_config corgi_pcmcia_config = { .num_devs = 1, }; -EXPORT_SYMBOL(corgiscoop_device); - static struct w100_mem_info corgi_fb_mem = { .ext_cntl = 0x00040003, .sdram_mode_reg = 0x00650021, diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 3f1dc74ac048..29034778bfda 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -23,12 +23,11 @@ #include <asm/mach-types.h> #include <mach/hardware.h> -#include <mach/sharpsl.h> #include <mach/corgi.h> #include <mach/pxa2xx-regs.h> +#include <mach/sharpsl_pm.h> #include "generic.h" -#include "sharpsl.h" #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ #define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */ @@ -134,11 +133,11 @@ unsigned long corgipm_read_devdata(int type) case SHARPSL_STATUS_ACIN: return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0); case SHARPSL_STATUS_LOCK: - return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock); + return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock); case SHARPSL_STATUS_CHRGFULL: - return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull); + return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull); case SHARPSL_STATUS_FATAL: - return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal); + return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal); case SHARPSL_ACIN_VOLT: return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT); case SHARPSL_BATT_TEMP: @@ -165,8 +164,6 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = { .should_wakeup = corgi_should_wakeup, #if defined(CONFIG_LCD_CORGI) .backlight_limit = corgi_lcd_limit_intensity, -#elif defined(CONFIG_BACKLIGHT_CORGI) - .backlight_limit = corgibl_limit_intensity, #endif .charge_on_volt = SHARPSL_CHARGE_ON_VOLT, .charge_on_temp = SHARPSL_CHARGE_ON_TEMP, diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 8e10db148f1b..65447dc736c2 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -4,6 +4,7 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <asm/pmu.h> #include <mach/udc.h> #include <mach/pxafb.h> #include <mach/mmc.h> @@ -31,6 +32,19 @@ void __init pxa_register_device(struct platform_device *dev, void *data) dev_err(&dev->dev, "unable to register device: %d\n", ret); } +static struct resource pxa_resource_pmu = { + .start = IRQ_PMU, + .end = IRQ_PMU, + .flags = IORESOURCE_IRQ, +}; + +struct platform_device pxa_device_pmu = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .resource = &pxa_resource_pmu, + .num_resources = 1, +}; + static struct resource pxamci_resources[] = { [0] = { .start = 0x41100000, diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 93817d99761e..50353ea49ba4 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -1,3 +1,4 @@ +extern struct platform_device pxa_device_pmu; extern struct platform_device pxa_device_mci; extern struct platform_device pxa3xx_device_mci2; extern struct platform_device pxa3xx_device_mci3; diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c deleted file mode 100644 index 8fde3387279d..000000000000 --- a/arch/arm/mach-pxa/e330.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Hardware definitions for the Toshiba e330 PDAs - * - * Copyright (c) 2003 Ian Molton <spyro@f2s.com> - * - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <linux/mfd/tc6387xb.h> - -#include <asm/setup.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <mach/pxa25x.h> -#include <mach/eseries-gpio.h> -#include <mach/udc.h> - -#include "generic.h" -#include "eseries.h" -#include "clock.h" - -/* -------------------- e330 tc6387xb parameters -------------------- */ - -static struct tc6387xb_platform_data e330_tc6387xb_info = { - .enable = &eseries_tmio_enable, - .disable = &eseries_tmio_disable, - .suspend = &eseries_tmio_suspend, - .resume = &eseries_tmio_resume, -}; - -static struct platform_device e330_tc6387xb_device = { - .name = "tc6387xb", - .id = -1, - .dev = { - .platform_data = &e330_tc6387xb_info, - }, - .num_resources = 2, - .resource = eseries_tmio_resources, -}; - -/* --------------------------------------------------------------- */ - -static struct platform_device *devices[] __initdata = { - &e330_tc6387xb_device, -}; - -static void __init e330_init(void) -{ - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - eseries_register_clks(); - eseries_get_tmio_gpios(); - platform_add_devices(devices, ARRAY_SIZE(devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); -} - -MACHINE_START(E330, "Toshiba e330") - /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .boot_params = 0xa0000100, - .map_io = pxa_map_io, - .init_irq = pxa25x_init_irq, - .fixup = eseries_fixup, - .init_machine = e330_init, - .timer = &pxa_timer, -MACHINE_END - diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c deleted file mode 100644 index f50f055f5720..000000000000 --- a/arch/arm/mach-pxa/e350.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Hardware definitions for the Toshiba e350 PDAs - * - * Copyright (c) 2003 Ian Molton <spyro@f2s.com> - * - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <linux/mfd/t7l66xb.h> - -#include <asm/setup.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <mach/irqs.h> -#include <mach/pxa25x.h> -#include <mach/eseries-gpio.h> -#include <mach/udc.h> - -#include "generic.h" -#include "eseries.h" -#include "clock.h" - -/* -------------------- e350 t7l66xb parameters -------------------- */ - -static struct t7l66xb_platform_data e350_t7l66xb_info = { - .irq_base = IRQ_BOARD_START, - .enable = &eseries_tmio_enable, - .suspend = &eseries_tmio_suspend, - .resume = &eseries_tmio_resume, -}; - -static struct platform_device e350_t7l66xb_device = { - .name = "t7l66xb", - .id = -1, - .dev = { - .platform_data = &e350_t7l66xb_info, - }, - .num_resources = 2, - .resource = eseries_tmio_resources, -}; - -/* ---------------------------------------------------------- */ - -static struct platform_device *devices[] __initdata = { - &e350_t7l66xb_device, -}; - -static void __init e350_init(void) -{ - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - eseries_register_clks(); - eseries_get_tmio_gpios(); - platform_add_devices(devices, ARRAY_SIZE(devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); -} - -MACHINE_START(E350, "Toshiba e350") - /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .boot_params = 0xa0000100, - .map_io = pxa_map_io, - .init_irq = pxa25x_init_irq, - .fixup = eseries_fixup, - .init_machine = e350_init, - .timer = &pxa_timer, -MACHINE_END - diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c deleted file mode 100644 index 55b950f12844..000000000000 --- a/arch/arm/mach-pxa/e400.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * Hardware definitions for the Toshiba eseries PDAs - * - * Copyright (c) 2003 Ian Molton <spyro@f2s.com> - * - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <linux/mfd/t7l66xb.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> - -#include <asm/setup.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <mach/pxa25x.h> -#include <mach/eseries-gpio.h> -#include <mach/pxafb.h> -#include <mach/udc.h> -#include <mach/irqs.h> - -#include "generic.h" -#include "eseries.h" -#include "clock.h" - -/* ------------------------ E400 LCD definitions ------------------------ */ - -static struct pxafb_mode_info e400_pxafb_mode_info = { - .pixclock = 140703, - .xres = 240, - .yres = 320, - .bpp = 16, - .hsync_len = 4, - .left_margin = 28, - .right_margin = 8, - .vsync_len = 3, - .upper_margin = 5, - .lower_margin = 6, - .sync = 0, -}; - -static struct pxafb_mach_info e400_pxafb_mach_info = { - .modes = &e400_pxafb_mode_info, - .num_modes = 1, - .lcd_conn = LCD_COLOR_TFT_16BPP, - .lccr3 = 0, - .pxafb_backlight_power = NULL, -}; - -/* ------------------------ E400 MFP config ----------------------------- */ - -static unsigned long e400_pin_config[] __initdata = { - /* Chip selects */ - GPIO15_nCS_1, /* CS1 - Flash */ - GPIO80_nCS_4, /* CS4 - TMIO */ - - /* Clocks */ - GPIO12_32KHz, - - /* BTUART */ - GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, - GPIO44_BTUART_CTS, - - /* TMIO controller */ - GPIO19_GPIO, /* t7l66xb #PCLR */ - GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */ - - /* wakeup */ - GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, -}; - -/* ---------------------------------------------------------------------- */ - -static struct mtd_partition partition_a = { - .name = "Internal NAND flash", - .offset = 0, - .size = MTDPART_SIZ_FULL, -}; - -static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; - -static struct nand_bbt_descr e400_t7l66xb_nand_bbt = { - .options = 0, - .offs = 4, - .len = 2, - .pattern = scan_ff_pattern -}; - -static struct tmio_nand_data e400_t7l66xb_nand_config = { - .num_partitions = 1, - .partition = &partition_a, - .badblock_pattern = &e400_t7l66xb_nand_bbt, -}; - -static struct t7l66xb_platform_data e400_t7l66xb_info = { - .irq_base = IRQ_BOARD_START, - .enable = &eseries_tmio_enable, - .suspend = &eseries_tmio_suspend, - .resume = &eseries_tmio_resume, - - .nand_data = &e400_t7l66xb_nand_config, -}; - -static struct platform_device e400_t7l66xb_device = { - .name = "t7l66xb", - .id = -1, - .dev = { - .platform_data = &e400_t7l66xb_info, - }, - .num_resources = 2, - .resource = eseries_tmio_resources, -}; - -/* ---------------------------------------------------------- */ - -static struct platform_device *devices[] __initdata = { - &e400_t7l66xb_device, -}; - -static void __init e400_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config)); - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - /* Fixme - e400 may have a switched clock */ - eseries_register_clks(); - eseries_get_tmio_gpios(); - set_pxa_fb_info(&e400_pxafb_mach_info); - platform_add_devices(devices, ARRAY_SIZE(devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); -} - -MACHINE_START(E400, "Toshiba e400") - /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .boot_params = 0xa0000100, - .map_io = pxa_map_io, - .init_irq = pxa25x_init_irq, - .fixup = eseries_fixup, - .init_machine = e400_init, - .timer = &pxa_timer, -MACHINE_END - diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c deleted file mode 100644 index d578021d1a10..000000000000 --- a/arch/arm/mach-pxa/e740.c +++ /dev/null @@ -1,225 +0,0 @@ -/* - * Hardware definitions for the Toshiba eseries PDAs - * - * Copyright (c) 2003 Ian Molton <spyro@f2s.com> - * - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/fb.h> -#include <linux/clk.h> -#include <linux/mfd/t7l66xb.h> - -#include <video/w100fb.h> - -#include <asm/setup.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <mach/pxa25x.h> -#include <mach/eseries-gpio.h> -#include <mach/udc.h> -#include <mach/irda.h> -#include <mach/irqs.h> -#include <mach/audio.h> - -#include "generic.h" -#include "eseries.h" -#include "clock.h" -#include "devices.h" - -/* ------------------------ e740 video support --------------------------- */ - -static struct w100_gen_regs e740_lcd_regs = { - .lcd_format = 0x00008023, - .lcdd_cntl1 = 0x0f000000, - .lcdd_cntl2 = 0x0003ffff, - .genlcd_cntl1 = 0x00ffff03, - .genlcd_cntl2 = 0x003c0f03, - .genlcd_cntl3 = 0x000143aa, -}; - -static struct w100_mode e740_lcd_mode = { - .xres = 240, - .yres = 320, - .left_margin = 20, - .right_margin = 28, - .upper_margin = 9, - .lower_margin = 8, - .crtc_ss = 0x80140013, - .crtc_ls = 0x81150110, - .crtc_gs = 0x80050005, - .crtc_vpos_gs = 0x000a0009, - .crtc_rev = 0x0040010a, - .crtc_dclk = 0xa906000a, - .crtc_gclk = 0x80050108, - .crtc_goe = 0x80050108, - .pll_freq = 57, - .pixclk_divider = 4, - .pixclk_divider_rotated = 4, - .pixclk_src = CLK_SRC_XTAL, - .sysclk_divider = 1, - .sysclk_src = CLK_SRC_PLL, - .crtc_ps1_active = 0x41060010, -}; - -static struct w100_gpio_regs e740_w100_gpio_info = { - .init_data1 = 0x21002103, - .gpio_dir1 = 0xffffdeff, - .gpio_oe1 = 0x03c00643, - .init_data2 = 0x003f003f, - .gpio_dir2 = 0xffffffff, - .gpio_oe2 = 0x000000ff, -}; - -static struct w100fb_mach_info e740_fb_info = { - .modelist = &e740_lcd_mode, - .num_modes = 1, - .regs = &e740_lcd_regs, - .gpio = &e740_w100_gpio_info, - .xtal_freq = 14318000, - .xtal_dbl = 1, -}; - -static struct resource e740_fb_resources[] = { - [0] = { - .start = 0x0c000000, - .end = 0x0cffffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device e740_fb_device = { - .name = "w100fb", - .id = -1, - .dev = { - .platform_data = &e740_fb_info, - }, - .num_resources = ARRAY_SIZE(e740_fb_resources), - .resource = e740_fb_resources, -}; - -/* --------------------------- MFP Pin config -------------------------- */ - -static unsigned long e740_pin_config[] __initdata = { - /* Chip selects */ - GPIO15_nCS_1, /* CS1 - Flash */ - GPIO79_nCS_3, /* CS3 - IMAGEON */ - GPIO80_nCS_4, /* CS4 - TMIO */ - - /* Clocks */ - GPIO12_32KHz, - - /* BTUART */ - GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, - GPIO44_BTUART_CTS, - - /* TMIO controller */ - GPIO19_GPIO, /* t7l66xb #PCLR */ - GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */ - - /* UDC */ - GPIO13_GPIO, - GPIO3_GPIO, - - /* IrDA */ - GPIO38_GPIO | MFP_LPM_DRIVE_HIGH, - - /* AC97 */ - GPIO28_AC97_BITCLK, - GPIO29_AC97_SDATA_IN_0, - GPIO30_AC97_SDATA_OUT, - GPIO31_AC97_SYNC, - - /* Audio power control */ - GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */ - GPIO40_GPIO, /* Mic amp power */ - GPIO41_GPIO, /* Headphone amp power */ - - /* PC Card */ - GPIO8_GPIO, /* CD0 */ - GPIO44_GPIO, /* CD1 */ - GPIO11_GPIO, /* IRQ0 */ - GPIO6_GPIO, /* IRQ1 */ - GPIO27_GPIO, /* RST0 */ - GPIO24_GPIO, /* RST1 */ - GPIO20_GPIO, /* PWR0 */ - GPIO23_GPIO, /* PWR1 */ - GPIO48_nPOE, - GPIO49_nPWE, - GPIO50_nPIOR, - GPIO51_nPIOW, - GPIO52_nPCE_1, - GPIO53_nPCE_2, - GPIO54_nPSKTSEL, - GPIO55_nPREG, - GPIO56_nPWAIT, - GPIO57_nIOIS16, - - /* wakeup */ - GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, -}; - -/* -------------------- e740 t7l66xb parameters -------------------- */ - -static struct t7l66xb_platform_data e740_t7l66xb_info = { - .irq_base = IRQ_BOARD_START, - .enable = &eseries_tmio_enable, - .suspend = &eseries_tmio_suspend, - .resume = &eseries_tmio_resume, -}; - -static struct platform_device e740_t7l66xb_device = { - .name = "t7l66xb", - .id = -1, - .dev = { - .platform_data = &e740_t7l66xb_info, - }, - .num_resources = 2, - .resource = eseries_tmio_resources, -}; - -/* ----------------------------------------------------------------------- */ - -static struct platform_device *devices[] __initdata = { - &e740_fb_device, - &e740_t7l66xb_device, -}; - -static void __init e740_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config)); - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - eseries_register_clks(); - clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name, - "UDCCLK", &pxa25x_device_udc.dev), - eseries_get_tmio_gpios(); - platform_add_devices(devices, ARRAY_SIZE(devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); - pxa_set_ac97_info(NULL); - pxa_set_ficp_info(&e7xx_ficp_platform_data); -} - -MACHINE_START(E740, "Toshiba e740") - /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .boot_params = 0xa0000100, - .map_io = pxa_map_io, - .init_irq = pxa25x_init_irq, - .fixup = eseries_fixup, - .init_machine = e740_init, - .timer = &pxa_timer, -MACHINE_END - diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c deleted file mode 100644 index af83caa52dd4..000000000000 --- a/arch/arm/mach-pxa/e750.c +++ /dev/null @@ -1,226 +0,0 @@ -/* - * Hardware definitions for the Toshiba eseries PDAs - * - * Copyright (c) 2003 Ian Molton <spyro@f2s.com> - * - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/fb.h> -#include <linux/mfd/tc6393xb.h> - -#include <video/w100fb.h> - -#include <asm/setup.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <mach/pxa25x.h> -#include <mach/eseries-gpio.h> -#include <mach/udc.h> -#include <mach/irda.h> -#include <mach/irqs.h> -#include <mach/audio.h> - -#include "generic.h" -#include "eseries.h" -#include "clock.h" - -/* ---------------------- E750 LCD definitions -------------------- */ - -static struct w100_gen_regs e750_lcd_regs = { - .lcd_format = 0x00008003, - .lcdd_cntl1 = 0x00000000, - .lcdd_cntl2 = 0x0003ffff, - .genlcd_cntl1 = 0x00fff003, - .genlcd_cntl2 = 0x003c0f03, - .genlcd_cntl3 = 0x000143aa, -}; - -static struct w100_mode e750_lcd_mode = { - .xres = 240, - .yres = 320, - .left_margin = 21, - .right_margin = 22, - .upper_margin = 5, - .lower_margin = 4, - .crtc_ss = 0x80150014, - .crtc_ls = 0x8014000d, - .crtc_gs = 0xc1000005, - .crtc_vpos_gs = 0x00020147, - .crtc_rev = 0x0040010a, - .crtc_dclk = 0xa1700030, - .crtc_gclk = 0x80cc0015, - .crtc_goe = 0x80cc0015, - .crtc_ps1_active = 0x61060017, - .pll_freq = 57, - .pixclk_divider = 4, - .pixclk_divider_rotated = 4, - .pixclk_src = CLK_SRC_XTAL, - .sysclk_divider = 1, - .sysclk_src = CLK_SRC_PLL, -}; - -static struct w100_gpio_regs e750_w100_gpio_info = { - .init_data1 = 0x01192f1b, - .gpio_dir1 = 0xd5ffdeff, - .gpio_oe1 = 0x000020bf, - .init_data2 = 0x010f010f, - .gpio_dir2 = 0xffffffff, - .gpio_oe2 = 0x000001cf, -}; - -static struct w100fb_mach_info e750_fb_info = { - .modelist = &e750_lcd_mode, - .num_modes = 1, - .regs = &e750_lcd_regs, - .gpio = &e750_w100_gpio_info, - .xtal_freq = 14318000, - .xtal_dbl = 1, -}; - -static struct resource e750_fb_resources[] = { - [0] = { - .start = 0x0c000000, - .end = 0x0cffffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device e750_fb_device = { - .name = "w100fb", - .id = -1, - .dev = { - .platform_data = &e750_fb_info, - }, - .num_resources = ARRAY_SIZE(e750_fb_resources), - .resource = e750_fb_resources, -}; - -/* -------------------- e750 MFP parameters -------------------- */ - -static unsigned long e750_pin_config[] __initdata = { - /* Chip selects */ - GPIO15_nCS_1, /* CS1 - Flash */ - GPIO79_nCS_3, /* CS3 - IMAGEON */ - GPIO80_nCS_4, /* CS4 - TMIO */ - - /* Clocks */ - GPIO11_3_6MHz, - - /* BTUART */ - GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, - GPIO44_BTUART_CTS, - - /* TMIO controller */ - GPIO19_GPIO, /* t7l66xb #PCLR */ - GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */ - - /* UDC */ - GPIO13_GPIO, - GPIO3_GPIO, - - /* IrDA */ - GPIO38_GPIO | MFP_LPM_DRIVE_HIGH, - - /* AC97 */ - GPIO28_AC97_BITCLK, - GPIO29_AC97_SDATA_IN_0, - GPIO30_AC97_SDATA_OUT, - GPIO31_AC97_SYNC, - - /* Audio power control */ - GPIO4_GPIO, /* Headphone amp power */ - GPIO7_GPIO, /* Speaker amp power */ - GPIO37_GPIO, /* Headphone detect */ - - /* PC Card */ - GPIO8_GPIO, /* CD0 */ - GPIO44_GPIO, /* CD1 */ - GPIO11_GPIO, /* IRQ0 */ - GPIO6_GPIO, /* IRQ1 */ - GPIO27_GPIO, /* RST0 */ - GPIO24_GPIO, /* RST1 */ - GPIO20_GPIO, /* PWR0 */ - GPIO23_GPIO, /* PWR1 */ - GPIO48_nPOE, - GPIO49_nPWE, - GPIO50_nPIOR, - GPIO51_nPIOW, - GPIO52_nPCE_1, - GPIO53_nPCE_2, - GPIO54_nPSKTSEL, - GPIO55_nPREG, - GPIO56_nPWAIT, - GPIO57_nIOIS16, - - /* wakeup */ - GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, -}; - -/* ----------------- e750 tc6393xb parameters ------------------ */ - -static struct tc6393xb_platform_data e750_tc6393xb_info = { - .irq_base = IRQ_BOARD_START, - .scr_pll2cr = 0x0cc1, - .scr_gper = 0, - .gpio_base = -1, - .suspend = &eseries_tmio_suspend, - .resume = &eseries_tmio_resume, - .enable = &eseries_tmio_enable, - .disable = &eseries_tmio_disable, -}; - -static struct platform_device e750_tc6393xb_device = { - .name = "tc6393xb", - .id = -1, - .dev = { - .platform_data = &e750_tc6393xb_info, - }, - .num_resources = 2, - .resource = eseries_tmio_resources, -}; - -/* ------------------------------------------------------------- */ - -static struct platform_device *devices[] __initdata = { - &e750_fb_device, - &e750_tc6393xb_device, -}; - -static void __init e750_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config)); - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name, - "GPIO11_CLK", NULL), - eseries_get_tmio_gpios(); - platform_add_devices(devices, ARRAY_SIZE(devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); - pxa_set_ac97_info(NULL); - pxa_set_ficp_info(&e7xx_ficp_platform_data); -} - -MACHINE_START(E750, "Toshiba e750") - /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .boot_params = 0xa0000100, - .map_io = pxa_map_io, - .init_irq = pxa25x_init_irq, - .fixup = eseries_fixup, - .init_machine = e750_init, - .timer = &pxa_timer, -MACHINE_END - diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c deleted file mode 100644 index 8ea97bf53fe1..000000000000 --- a/arch/arm/mach-pxa/e800.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Hardware definitions for the Toshiba eseries PDAs - * - * Copyright (c) 2003 Ian Molton <spyro@f2s.com> - * - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/fb.h> -#include <linux/mfd/tc6393xb.h> - -#include <video/w100fb.h> - -#include <asm/setup.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <mach/pxa25x.h> -#include <mach/eseries-gpio.h> -#include <mach/udc.h> -#include <mach/irqs.h> -#include <mach/audio.h> - -#include "generic.h" -#include "eseries.h" -#include "clock.h" - -/* ------------------------ e800 LCD definitions ------------------------- */ - -static unsigned long e800_pin_config[] __initdata = { - /* AC97 */ - GPIO28_AC97_BITCLK, - GPIO29_AC97_SDATA_IN_0, - GPIO30_AC97_SDATA_OUT, - GPIO31_AC97_SYNC, -}; - -static struct w100_gen_regs e800_lcd_regs = { - .lcd_format = 0x00008003, - .lcdd_cntl1 = 0x02a00000, - .lcdd_cntl2 = 0x0003ffff, - .genlcd_cntl1 = 0x000ff2a3, - .genlcd_cntl2 = 0x000002a3, - .genlcd_cntl3 = 0x000102aa, -}; - -static struct w100_mode e800_lcd_mode[2] = { - [0] = { - .xres = 480, - .yres = 640, - .left_margin = 52, - .right_margin = 148, - .upper_margin = 2, - .lower_margin = 6, - .crtc_ss = 0x80350034, - .crtc_ls = 0x802b0026, - .crtc_gs = 0x80160016, - .crtc_vpos_gs = 0x00020003, - .crtc_rev = 0x0040001d, - .crtc_dclk = 0xe0000000, - .crtc_gclk = 0x82a50049, - .crtc_goe = 0x80ee001c, - .crtc_ps1_active = 0x00000000, - .pll_freq = 128, - .pixclk_divider = 4, - .pixclk_divider_rotated = 6, - .pixclk_src = CLK_SRC_PLL, - .sysclk_divider = 0, - .sysclk_src = CLK_SRC_PLL, - }, - [1] = { - .xres = 240, - .yres = 320, - .left_margin = 15, - .right_margin = 88, - .upper_margin = 0, - .lower_margin = 7, - .crtc_ss = 0xd010000f, - .crtc_ls = 0x80070003, - .crtc_gs = 0x80000000, - .crtc_vpos_gs = 0x01460147, - .crtc_rev = 0x00400003, - .crtc_dclk = 0xa1700030, - .crtc_gclk = 0x814b0008, - .crtc_goe = 0x80cc0015, - .crtc_ps1_active = 0x00000000, - .pll_freq = 100, - .pixclk_divider = 6, /* Wince uses 14 which gives a */ - .pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */ - .pixclk_src = CLK_SRC_PLL, - .sysclk_divider = 0, - .sysclk_src = CLK_SRC_PLL, - } -}; - - -static struct w100_gpio_regs e800_w100_gpio_info = { - .init_data1 = 0xc13fc019, - .gpio_dir1 = 0x3e40df7f, - .gpio_oe1 = 0x003c3000, - .init_data2 = 0x00000000, - .gpio_dir2 = 0x00000000, - .gpio_oe2 = 0x00000000, -}; - -static struct w100_mem_info e800_w100_mem_info = { - .ext_cntl = 0x09640011, - .sdram_mode_reg = 0x00600021, - .ext_timing_cntl = 0x10001545, - .io_cntl = 0x7ddd7333, - .size = 0x1fffff, -}; - -static void e800_tg_change(struct w100fb_par *par) -{ - unsigned long tmp; - - tmp = w100fb_gpio_read(W100_GPIO_PORT_A); - if (par->mode->xres == 480) - tmp |= 0x100; - else - tmp &= ~0x100; - w100fb_gpio_write(W100_GPIO_PORT_A, tmp); -} - -static struct w100_tg_info e800_tg_info = { - .change = e800_tg_change, -}; - -static struct w100fb_mach_info e800_fb_info = { - .modelist = e800_lcd_mode, - .num_modes = 2, - .regs = &e800_lcd_regs, - .gpio = &e800_w100_gpio_info, - .mem = &e800_w100_mem_info, - .tg = &e800_tg_info, - .xtal_freq = 16000000, -}; - -static struct resource e800_fb_resources[] = { - [0] = { - .start = 0x0c000000, - .end = 0x0cffffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device e800_fb_device = { - .name = "w100fb", - .id = -1, - .dev = { - .platform_data = &e800_fb_info, - }, - .num_resources = ARRAY_SIZE(e800_fb_resources), - .resource = e800_fb_resources, -}; - -/* --------------------------- UDC definitions --------------------------- */ - -static struct pxa2xx_udc_mach_info e800_udc_mach_info = { - .gpio_vbus = GPIO_E800_USB_DISC, - .gpio_pullup = GPIO_E800_USB_PULLUP, - .gpio_pullup_inverted = 1 -}; - -/* ----------------- e800 tc6393xb parameters ------------------ */ - -static struct tc6393xb_platform_data e800_tc6393xb_info = { - .irq_base = IRQ_BOARD_START, - .scr_pll2cr = 0x0cc1, - .scr_gper = 0, - .gpio_base = -1, - .suspend = &eseries_tmio_suspend, - .resume = &eseries_tmio_resume, - .enable = &eseries_tmio_enable, - .disable = &eseries_tmio_disable, -}; - -static struct platform_device e800_tc6393xb_device = { - .name = "tc6393xb", - .id = -1, - .dev = { - .platform_data = &e800_tc6393xb_info, - }, - .num_resources = 2, - .resource = eseries_tmio_resources, -}; - -/* ----------------------------------------------------------------------- */ - -static struct platform_device *devices[] __initdata = { - &e800_fb_device, - &e800_tc6393xb_device, -}; - -static void __init e800_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config)); - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name, - "GPIO11_CLK", NULL), - eseries_get_tmio_gpios(); - platform_add_devices(devices, ARRAY_SIZE(devices)); - pxa_set_udc_info(&e800_udc_mach_info); - pxa_set_ac97_info(NULL); -} - -MACHINE_START(E800, "Toshiba e800") - /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .boot_params = 0xa0000100, - .map_io = pxa_map_io, - .init_irq = pxa25x_init_irq, - .fixup = eseries_fixup, - .init_machine = e800_init, - .timer = &pxa_timer, -MACHINE_END - diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index a0ab3082a000..349212a1cbd3 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -15,6 +15,13 @@ #include <linux/gpio.h> #include <linux/delay.h> #include <linux/platform_device.h> +#include <linux/mfd/tc6387xb.h> +#include <linux/mfd/tc6393xb.h> +#include <linux/mfd/t7l66xb.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> + +#include <video/w100fb.h> #include <asm/setup.h> #include <asm/mach/arch.h> @@ -22,9 +29,12 @@ #include <mach/pxa25x.h> #include <mach/eseries-gpio.h> +#include <mach/audio.h> +#include <mach/pxafb.h> #include <mach/udc.h> #include <mach/irda.h> +#include "devices.h" #include "generic.h" #include "clock.h" @@ -130,3 +140,802 @@ void eseries_register_clks(void) clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs)); } +#ifdef CONFIG_MACH_E330 +/* -------------------- e330 tc6387xb parameters -------------------- */ + +static struct tc6387xb_platform_data e330_tc6387xb_info = { + .enable = &eseries_tmio_enable, + .disable = &eseries_tmio_disable, + .suspend = &eseries_tmio_suspend, + .resume = &eseries_tmio_resume, +}; + +static struct platform_device e330_tc6387xb_device = { + .name = "tc6387xb", + .id = -1, + .dev = { + .platform_data = &e330_tc6387xb_info, + }, + .num_resources = 2, + .resource = eseries_tmio_resources, +}; + +/* --------------------------------------------------------------- */ + +static struct platform_device *e330_devices[] __initdata = { + &e330_tc6387xb_device, +}; + +static void __init e330_init(void) +{ + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + eseries_register_clks(); + eseries_get_tmio_gpios(); + platform_add_devices(ARRAY_AND_SIZE(e330_devices)); + pxa_set_udc_info(&e7xx_udc_mach_info); +} + +MACHINE_START(E330, "Toshiba e330") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .init_machine = e330_init, + .timer = &pxa_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_E350 +/* -------------------- e350 t7l66xb parameters -------------------- */ + +static struct t7l66xb_platform_data e350_t7l66xb_info = { + .irq_base = IRQ_BOARD_START, + .enable = &eseries_tmio_enable, + .suspend = &eseries_tmio_suspend, + .resume = &eseries_tmio_resume, +}; + +static struct platform_device e350_t7l66xb_device = { + .name = "t7l66xb", + .id = -1, + .dev = { + .platform_data = &e350_t7l66xb_info, + }, + .num_resources = 2, + .resource = eseries_tmio_resources, +}; + +/* ---------------------------------------------------------- */ + +static struct platform_device *e350_devices[] __initdata = { + &e350_t7l66xb_device, +}; + +static void __init e350_init(void) +{ + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + eseries_register_clks(); + eseries_get_tmio_gpios(); + platform_add_devices(ARRAY_AND_SIZE(e350_devices)); + pxa_set_udc_info(&e7xx_udc_mach_info); +} + +MACHINE_START(E350, "Toshiba e350") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .init_machine = e350_init, + .timer = &pxa_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_E400 +/* ------------------------ E400 LCD definitions ------------------------ */ + +static struct pxafb_mode_info e400_pxafb_mode_info = { + .pixclock = 140703, + .xres = 240, + .yres = 320, + .bpp = 16, + .hsync_len = 4, + .left_margin = 28, + .right_margin = 8, + .vsync_len = 3, + .upper_margin = 5, + .lower_margin = 6, + .sync = 0, +}; + +static struct pxafb_mach_info e400_pxafb_mach_info = { + .modes = &e400_pxafb_mode_info, + .num_modes = 1, + .lcd_conn = LCD_COLOR_TFT_16BPP, + .lccr3 = 0, + .pxafb_backlight_power = NULL, +}; + +/* ------------------------ E400 MFP config ----------------------------- */ + +static unsigned long e400_pin_config[] __initdata = { + /* Chip selects */ + GPIO15_nCS_1, /* CS1 - Flash */ + GPIO80_nCS_4, /* CS4 - TMIO */ + + /* Clocks */ + GPIO12_32KHz, + + /* BTUART */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + + /* TMIO controller */ + GPIO19_GPIO, /* t7l66xb #PCLR */ + GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */ + + /* wakeup */ + GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, +}; + +/* ---------------------------------------------------------------------- */ + +static struct mtd_partition partition_a = { + .name = "Internal NAND flash", + .offset = 0, + .size = MTDPART_SIZ_FULL, +}; + +static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; + +static struct nand_bbt_descr e400_t7l66xb_nand_bbt = { + .options = 0, + .offs = 4, + .len = 2, + .pattern = scan_ff_pattern +}; + +static struct tmio_nand_data e400_t7l66xb_nand_config = { + .num_partitions = 1, + .partition = &partition_a, + .badblock_pattern = &e400_t7l66xb_nand_bbt, +}; + +static struct t7l66xb_platform_data e400_t7l66xb_info = { + .irq_base = IRQ_BOARD_START, + .enable = &eseries_tmio_enable, + .suspend = &eseries_tmio_suspend, + .resume = &eseries_tmio_resume, + + .nand_data = &e400_t7l66xb_nand_config, +}; + +static struct platform_device e400_t7l66xb_device = { + .name = "t7l66xb", + .id = -1, + .dev = { + .platform_data = &e400_t7l66xb_info, + }, + .num_resources = 2, + .resource = eseries_tmio_resources, +}; + +/* ---------------------------------------------------------- */ + +static struct platform_device *e400_devices[] __initdata = { + &e400_t7l66xb_device, +}; + +static void __init e400_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + /* Fixme - e400 may have a switched clock */ + eseries_register_clks(); + eseries_get_tmio_gpios(); + set_pxa_fb_info(&e400_pxafb_mach_info); + platform_add_devices(ARRAY_AND_SIZE(e400_devices)); + pxa_set_udc_info(&e7xx_udc_mach_info); +} + +MACHINE_START(E400, "Toshiba e400") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .init_machine = e400_init, + .timer = &pxa_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_E740 +/* ------------------------ e740 video support --------------------------- */ + +static struct w100_gen_regs e740_lcd_regs = { + .lcd_format = 0x00008023, + .lcdd_cntl1 = 0x0f000000, + .lcdd_cntl2 = 0x0003ffff, + .genlcd_cntl1 = 0x00ffff03, + .genlcd_cntl2 = 0x003c0f03, + .genlcd_cntl3 = 0x000143aa, +}; + +static struct w100_mode e740_lcd_mode = { + .xres = 240, + .yres = 320, + .left_margin = 20, + .right_margin = 28, + .upper_margin = 9, + .lower_margin = 8, + .crtc_ss = 0x80140013, + .crtc_ls = 0x81150110, + .crtc_gs = 0x80050005, + .crtc_vpos_gs = 0x000a0009, + .crtc_rev = 0x0040010a, + .crtc_dclk = 0xa906000a, + .crtc_gclk = 0x80050108, + .crtc_goe = 0x80050108, + .pll_freq = 57, + .pixclk_divider = 4, + .pixclk_divider_rotated = 4, + .pixclk_src = CLK_SRC_XTAL, + .sysclk_divider = 1, + .sysclk_src = CLK_SRC_PLL, + .crtc_ps1_active = 0x41060010, +}; + +static struct w100_gpio_regs e740_w100_gpio_info = { + .init_data1 = 0x21002103, + .gpio_dir1 = 0xffffdeff, + .gpio_oe1 = 0x03c00643, + .init_data2 = 0x003f003f, + .gpio_dir2 = 0xffffffff, + .gpio_oe2 = 0x000000ff, +}; + +static struct w100fb_mach_info e740_fb_info = { + .modelist = &e740_lcd_mode, + .num_modes = 1, + .regs = &e740_lcd_regs, + .gpio = &e740_w100_gpio_info, + .xtal_freq = 14318000, + .xtal_dbl = 1, +}; + +static struct resource e740_fb_resources[] = { + [0] = { + .start = 0x0c000000, + .end = 0x0cffffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device e740_fb_device = { + .name = "w100fb", + .id = -1, + .dev = { + .platform_data = &e740_fb_info, + }, + .num_resources = ARRAY_SIZE(e740_fb_resources), + .resource = e740_fb_resources, +}; + +/* --------------------------- MFP Pin config -------------------------- */ + +static unsigned long e740_pin_config[] __initdata = { + /* Chip selects */ + GPIO15_nCS_1, /* CS1 - Flash */ + GPIO79_nCS_3, /* CS3 - IMAGEON */ + GPIO80_nCS_4, /* CS4 - TMIO */ + + /* Clocks */ + GPIO12_32KHz, + + /* BTUART */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + + /* TMIO controller */ + GPIO19_GPIO, /* t7l66xb #PCLR */ + GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */ + + /* UDC */ + GPIO13_GPIO, + GPIO3_GPIO, + + /* IrDA */ + GPIO38_GPIO | MFP_LPM_DRIVE_HIGH, + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + + /* Audio power control */ + GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */ + GPIO40_GPIO, /* Mic amp power */ + GPIO41_GPIO, /* Headphone amp power */ + + /* PC Card */ + GPIO8_GPIO, /* CD0 */ + GPIO44_GPIO, /* CD1 */ + GPIO11_GPIO, /* IRQ0 */ + GPIO6_GPIO, /* IRQ1 */ + GPIO27_GPIO, /* RST0 */ + GPIO24_GPIO, /* RST1 */ + GPIO20_GPIO, /* PWR0 */ + GPIO23_GPIO, /* PWR1 */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO52_nPCE_1, + GPIO53_nPCE_2, + GPIO54_nPSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + + /* wakeup */ + GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, +}; + +/* -------------------- e740 t7l66xb parameters -------------------- */ + +static struct t7l66xb_platform_data e740_t7l66xb_info = { + .irq_base = IRQ_BOARD_START, + .enable = &eseries_tmio_enable, + .suspend = &eseries_tmio_suspend, + .resume = &eseries_tmio_resume, +}; + +static struct platform_device e740_t7l66xb_device = { + .name = "t7l66xb", + .id = -1, + .dev = { + .platform_data = &e740_t7l66xb_info, + }, + .num_resources = 2, + .resource = eseries_tmio_resources, +}; + +/* ----------------------------------------------------------------------- */ + +static struct platform_device *e740_devices[] __initdata = { + &e740_fb_device, + &e740_t7l66xb_device, +}; + +static void __init e740_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + eseries_register_clks(); + clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name, + "UDCCLK", &pxa25x_device_udc.dev), + eseries_get_tmio_gpios(); + platform_add_devices(ARRAY_AND_SIZE(e740_devices)); + pxa_set_udc_info(&e7xx_udc_mach_info); + pxa_set_ac97_info(NULL); + pxa_set_ficp_info(&e7xx_ficp_platform_data); +} + +MACHINE_START(E740, "Toshiba e740") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .init_machine = e740_init, + .timer = &pxa_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_E750 +/* ---------------------- E750 LCD definitions -------------------- */ + +static struct w100_gen_regs e750_lcd_regs = { + .lcd_format = 0x00008003, + .lcdd_cntl1 = 0x00000000, + .lcdd_cntl2 = 0x0003ffff, + .genlcd_cntl1 = 0x00fff003, + .genlcd_cntl2 = 0x003c0f03, + .genlcd_cntl3 = 0x000143aa, +}; + +static struct w100_mode e750_lcd_mode = { + .xres = 240, + .yres = 320, + .left_margin = 21, + .right_margin = 22, + .upper_margin = 5, + .lower_margin = 4, + .crtc_ss = 0x80150014, + .crtc_ls = 0x8014000d, + .crtc_gs = 0xc1000005, + .crtc_vpos_gs = 0x00020147, + .crtc_rev = 0x0040010a, + .crtc_dclk = 0xa1700030, + .crtc_gclk = 0x80cc0015, + .crtc_goe = 0x80cc0015, + .crtc_ps1_active = 0x61060017, + .pll_freq = 57, + .pixclk_divider = 4, + .pixclk_divider_rotated = 4, + .pixclk_src = CLK_SRC_XTAL, + .sysclk_divider = 1, + .sysclk_src = CLK_SRC_PLL, +}; + +static struct w100_gpio_regs e750_w100_gpio_info = { + .init_data1 = 0x01192f1b, + .gpio_dir1 = 0xd5ffdeff, + .gpio_oe1 = 0x000020bf, + .init_data2 = 0x010f010f, + .gpio_dir2 = 0xffffffff, + .gpio_oe2 = 0x000001cf, +}; + +static struct w100fb_mach_info e750_fb_info = { + .modelist = &e750_lcd_mode, + .num_modes = 1, + .regs = &e750_lcd_regs, + .gpio = &e750_w100_gpio_info, + .xtal_freq = 14318000, + .xtal_dbl = 1, +}; + +static struct resource e750_fb_resources[] = { + [0] = { + .start = 0x0c000000, + .end = 0x0cffffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device e750_fb_device = { + .name = "w100fb", + .id = -1, + .dev = { + .platform_data = &e750_fb_info, + }, + .num_resources = ARRAY_SIZE(e750_fb_resources), + .resource = e750_fb_resources, +}; + +/* -------------------- e750 MFP parameters -------------------- */ + +static unsigned long e750_pin_config[] __initdata = { + /* Chip selects */ + GPIO15_nCS_1, /* CS1 - Flash */ + GPIO79_nCS_3, /* CS3 - IMAGEON */ + GPIO80_nCS_4, /* CS4 - TMIO */ + + /* Clocks */ + GPIO11_3_6MHz, + + /* BTUART */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + + /* TMIO controller */ + GPIO19_GPIO, /* t7l66xb #PCLR */ + GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */ + + /* UDC */ + GPIO13_GPIO, + GPIO3_GPIO, + + /* IrDA */ + GPIO38_GPIO | MFP_LPM_DRIVE_HIGH, + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + + /* Audio power control */ + GPIO4_GPIO, /* Headphone amp power */ + GPIO7_GPIO, /* Speaker amp power */ + GPIO37_GPIO, /* Headphone detect */ + + /* PC Card */ + GPIO8_GPIO, /* CD0 */ + GPIO44_GPIO, /* CD1 */ + GPIO11_GPIO, /* IRQ0 */ + GPIO6_GPIO, /* IRQ1 */ + GPIO27_GPIO, /* RST0 */ + GPIO24_GPIO, /* RST1 */ + GPIO20_GPIO, /* PWR0 */ + GPIO23_GPIO, /* PWR1 */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO52_nPCE_1, + GPIO53_nPCE_2, + GPIO54_nPSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + + /* wakeup */ + GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, +}; + +/* ----------------- e750 tc6393xb parameters ------------------ */ + +static struct tc6393xb_platform_data e750_tc6393xb_info = { + .irq_base = IRQ_BOARD_START, + .scr_pll2cr = 0x0cc1, + .scr_gper = 0, + .gpio_base = -1, + .suspend = &eseries_tmio_suspend, + .resume = &eseries_tmio_resume, + .enable = &eseries_tmio_enable, + .disable = &eseries_tmio_disable, +}; + +static struct platform_device e750_tc6393xb_device = { + .name = "tc6393xb", + .id = -1, + .dev = { + .platform_data = &e750_tc6393xb_info, + }, + .num_resources = 2, + .resource = eseries_tmio_resources, +}; + +/* ------------------------------------------------------------- */ + +static struct platform_device *e750_devices[] __initdata = { + &e750_fb_device, + &e750_tc6393xb_device, +}; + +static void __init e750_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name, + "GPIO11_CLK", NULL), + eseries_get_tmio_gpios(); + platform_add_devices(ARRAY_AND_SIZE(e750_devices)); + pxa_set_udc_info(&e7xx_udc_mach_info); + pxa_set_ac97_info(NULL); + pxa_set_ficp_info(&e7xx_ficp_platform_data); +} + +MACHINE_START(E750, "Toshiba e750") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .init_machine = e750_init, + .timer = &pxa_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_E800 +/* ------------------------ e800 LCD definitions ------------------------- */ + +static unsigned long e800_pin_config[] __initdata = { + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, +}; + +static struct w100_gen_regs e800_lcd_regs = { + .lcd_format = 0x00008003, + .lcdd_cntl1 = 0x02a00000, + .lcdd_cntl2 = 0x0003ffff, + .genlcd_cntl1 = 0x000ff2a3, + .genlcd_cntl2 = 0x000002a3, + .genlcd_cntl3 = 0x000102aa, +}; + +static struct w100_mode e800_lcd_mode[2] = { + [0] = { + .xres = 480, + .yres = 640, + .left_margin = 52, + .right_margin = 148, + .upper_margin = 2, + .lower_margin = 6, + .crtc_ss = 0x80350034, + .crtc_ls = 0x802b0026, + .crtc_gs = 0x80160016, + .crtc_vpos_gs = 0x00020003, + .crtc_rev = 0x0040001d, + .crtc_dclk = 0xe0000000, + .crtc_gclk = 0x82a50049, + .crtc_goe = 0x80ee001c, + .crtc_ps1_active = 0x00000000, + .pll_freq = 128, + .pixclk_divider = 4, + .pixclk_divider_rotated = 6, + .pixclk_src = CLK_SRC_PLL, + .sysclk_divider = 0, + .sysclk_src = CLK_SRC_PLL, + }, + [1] = { + .xres = 240, + .yres = 320, + .left_margin = 15, + .right_margin = 88, + .upper_margin = 0, + .lower_margin = 7, + .crtc_ss = 0xd010000f, + .crtc_ls = 0x80070003, + .crtc_gs = 0x80000000, + .crtc_vpos_gs = 0x01460147, + .crtc_rev = 0x00400003, + .crtc_dclk = 0xa1700030, + .crtc_gclk = 0x814b0008, + .crtc_goe = 0x80cc0015, + .crtc_ps1_active = 0x00000000, + .pll_freq = 100, + .pixclk_divider = 6, /* Wince uses 14 which gives a */ + .pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */ + .pixclk_src = CLK_SRC_PLL, + .sysclk_divider = 0, + .sysclk_src = CLK_SRC_PLL, + } +}; + + +static struct w100_gpio_regs e800_w100_gpio_info = { + .init_data1 = 0xc13fc019, + .gpio_dir1 = 0x3e40df7f, + .gpio_oe1 = 0x003c3000, + .init_data2 = 0x00000000, + .gpio_dir2 = 0x00000000, + .gpio_oe2 = 0x00000000, +}; + +static struct w100_mem_info e800_w100_mem_info = { + .ext_cntl = 0x09640011, + .sdram_mode_reg = 0x00600021, + .ext_timing_cntl = 0x10001545, + .io_cntl = 0x7ddd7333, + .size = 0x1fffff, +}; + +static void e800_tg_change(struct w100fb_par *par) +{ + unsigned long tmp; + + tmp = w100fb_gpio_read(W100_GPIO_PORT_A); + if (par->mode->xres == 480) + tmp |= 0x100; + else + tmp &= ~0x100; + w100fb_gpio_write(W100_GPIO_PORT_A, tmp); +} + +static struct w100_tg_info e800_tg_info = { + .change = e800_tg_change, +}; + +static struct w100fb_mach_info e800_fb_info = { + .modelist = e800_lcd_mode, + .num_modes = 2, + .regs = &e800_lcd_regs, + .gpio = &e800_w100_gpio_info, + .mem = &e800_w100_mem_info, + .tg = &e800_tg_info, + .xtal_freq = 16000000, +}; + +static struct resource e800_fb_resources[] = { + [0] = { + .start = 0x0c000000, + .end = 0x0cffffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device e800_fb_device = { + .name = "w100fb", + .id = -1, + .dev = { + .platform_data = &e800_fb_info, + }, + .num_resources = ARRAY_SIZE(e800_fb_resources), + .resource = e800_fb_resources, +}; + +/* --------------------------- UDC definitions --------------------------- */ + +static struct pxa2xx_udc_mach_info e800_udc_mach_info = { + .gpio_vbus = GPIO_E800_USB_DISC, + .gpio_pullup = GPIO_E800_USB_PULLUP, + .gpio_pullup_inverted = 1 +}; + +/* ----------------- e800 tc6393xb parameters ------------------ */ + +static struct tc6393xb_platform_data e800_tc6393xb_info = { + .irq_base = IRQ_BOARD_START, + .scr_pll2cr = 0x0cc1, + .scr_gper = 0, + .gpio_base = -1, + .suspend = &eseries_tmio_suspend, + .resume = &eseries_tmio_resume, + .enable = &eseries_tmio_enable, + .disable = &eseries_tmio_disable, +}; + +static struct platform_device e800_tc6393xb_device = { + .name = "tc6393xb", + .id = -1, + .dev = { + .platform_data = &e800_tc6393xb_info, + }, + .num_resources = 2, + .resource = eseries_tmio_resources, +}; + +/* ----------------------------------------------------------------------- */ + +static struct platform_device *e800_devices[] __initdata = { + &e800_fb_device, + &e800_tc6393xb_device, +}; + +static void __init e800_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name, + "GPIO11_CLK", NULL), + eseries_get_tmio_gpios(); + platform_add_devices(ARRAY_AND_SIZE(e800_devices)); + pxa_set_udc_info(&e800_udc_mach_info); + pxa_set_ac97_info(NULL); +} + +MACHINE_START(E800, "Toshiba e800") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .init_machine = e800_init, + .timer = &pxa_timer, +MACHINE_END +#endif diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c deleted file mode 100644 index 5161dca8ccc0..000000000000 --- a/arch/arm/mach-pxa/imote2.c +++ /dev/null @@ -1,590 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/imote2.c - * - * Author: Ed C. Epp - * Created: Nov 05, 2002 - * Copyright: Intel Corp. - * - * Modified 2008: Jonathan Cameron - * - * The Imote2 is a wireless sensor node platform sold - * by Crossbow (www.xbow.com). - */ - -#include <linux/init.h> -#include <linux/device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> -#include <linux/regulator/machine.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/spi/spi.h> -#include <linux/i2c.h> -#include <linux/mfd/da903x.h> -#include <linux/sht15.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> - -#include <mach/pxa27x.h> -#include <plat/i2c.h> -#include <mach/udc.h> -#include <mach/mmc.h> -#include <mach/pxa2xx_spi.h> -#include <mach/pxa27x-udc.h> - -#include "devices.h" -#include "generic.h" - -static unsigned long imote2_pin_config[] __initdata = { - - /* Device Identification for wakeup*/ - GPIO102_GPIO, - - /* Button */ - GPIO91_GPIO, - - /* DA9030 */ - GPIO1_GPIO, - - /* MMC */ - GPIO32_MMC_CLK, - GPIO112_MMC_CMD, - GPIO92_MMC_DAT_0, - GPIO109_MMC_DAT_1, - GPIO110_MMC_DAT_2, - GPIO111_MMC_DAT_3, - - /* 802.15.4 radio - driver out of mainline */ - GPIO22_GPIO, /* CC_RSTN */ - GPIO114_GPIO, /* CC_FIFO */ - GPIO116_GPIO, /* CC_CCA */ - GPIO0_GPIO, /* CC_FIFOP */ - GPIO16_GPIO, /* CCSFD */ - GPIO115_GPIO, /* Power enable */ - - /* I2C */ - GPIO117_I2C_SCL, - GPIO118_I2C_SDA, - - /* SSP 3 - 802.15.4 radio */ - GPIO39_GPIO, /* Chip Select */ - GPIO34_SSP3_SCLK, - GPIO35_SSP3_TXD, - GPIO41_SSP3_RXD, - - /* SSP 2 - to daughter boards */ - GPIO37_GPIO, /* Chip Select */ - GPIO36_SSP2_SCLK, - GPIO38_SSP2_TXD, - GPIO11_SSP2_RXD, - - /* SSP 1 - to daughter boards */ - GPIO24_GPIO, /* Chip Select */ - GPIO23_SSP1_SCLK, - GPIO25_SSP1_TXD, - GPIO26_SSP1_RXD, - - /* BTUART Basic Connector*/ - GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, - GPIO44_BTUART_CTS, - GPIO45_BTUART_RTS, - - /* STUART Serial console via debug board*/ - GPIO46_STUART_RXD, - GPIO47_STUART_TXD, - - /* Basic sensor board */ - GPIO96_GPIO, /* accelerometer interrupt */ - GPIO99_GPIO, /* ADC interrupt */ - - /* SHT15 */ - GPIO100_GPIO, - GPIO98_GPIO, - - /* Connector pins specified as gpios */ - GPIO94_GPIO, /* large basic connector pin 14 */ - GPIO10_GPIO, /* large basic connector pin 23 */ - - /* LEDS */ - GPIO103_GPIO, /* red led */ - GPIO104_GPIO, /* green led */ - GPIO105_GPIO, /* blue led */ -}; - -static struct sht15_platform_data platform_data_sht15 = { - .gpio_data = 100, - .gpio_sck = 98, -}; - -static struct platform_device sht15 = { - .name = "sht15", - .id = -1, - .dev = { - .platform_data = &platform_data_sht15, - }, -}; - -static struct regulator_consumer_supply imote2_sensor_3_con[] = { - { - .dev = &sht15.dev, - .supply = "vcc", - }, -}; - -static struct gpio_led imote2_led_pins[] = { - { - .name = "imote2:red", - .gpio = 103, - .active_low = 1, - }, { - .name = "imote2:green", - .gpio = 104, - .active_low = 1, - }, { - .name = "imote2:blue", - .gpio = 105, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data imote2_led_data = { - .num_leds = ARRAY_SIZE(imote2_led_pins), - .leds = imote2_led_pins, -}; - -static struct platform_device imote2_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &imote2_led_data, - }, -}; - -/* Reverse engineered partly from Platformx drivers */ -enum imote2_ldos{ - vcc_vref, - vcc_cc2420, - vcc_mica, - vcc_bt, - /* The two voltages available to sensor boards */ - vcc_sensor_1_8, - vcc_sensor_3, - - vcc_sram_ext, /* directly connected to the pxa271 */ - vcc_pxa_pll, - vcc_pxa_usim, /* Reference voltage for certain gpios */ - vcc_pxa_mem, - vcc_pxa_flash, - vcc_pxa_core, /*Dc-Dc buck not yet supported */ - vcc_lcd, - vcc_bb, - vcc_bbio, - vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/ -}; - -/* The values of the various regulator constraints are obviously dependent - * on exactly what is wired to each ldo. Unfortunately this information is - * not generally available. More information has been requested from Xbow - * but as of yet they haven't been forthcoming. - * - * Some of these are clearly Stargate 2 related (no way of plugging - * in an lcd on the IM2 for example!). - */ -static struct regulator_init_data imote2_ldo_init_data[] = { - [vcc_bbio] = { - .constraints = { /* board default 1.8V */ - .name = "vcc_bbio", - .min_uV = 1800000, - .max_uV = 1800000, - }, - }, - [vcc_bb] = { - .constraints = { /* board default 2.8V */ - .name = "vcc_bb", - .min_uV = 2700000, - .max_uV = 3000000, - }, - }, - [vcc_pxa_flash] = { - .constraints = {/* default is 1.8V */ - .name = "vcc_pxa_flash", - .min_uV = 1800000, - .max_uV = 1800000, - }, - }, - [vcc_cc2420] = { /* also vcc_io */ - .constraints = { - /* board default is 2.8V */ - .name = "vcc_cc2420", - .min_uV = 2700000, - .max_uV = 3300000, - }, - }, - [vcc_vref] = { /* Reference for what? */ - .constraints = { /* default 1.8V */ - .name = "vcc_vref", - .min_uV = 1800000, - .max_uV = 1800000, - }, - }, - [vcc_sram_ext] = { - .constraints = { /* default 2.8V */ - .name = "vcc_sram_ext", - .min_uV = 2800000, - .max_uV = 2800000, - }, - }, - [vcc_mica] = { - .constraints = { /* default 2.8V */ - .name = "vcc_mica", - .min_uV = 2800000, - .max_uV = 2800000, - }, - }, - [vcc_bt] = { - .constraints = { /* default 2.8V */ - .name = "vcc_bt", - .min_uV = 2800000, - .max_uV = 2800000, - }, - }, - [vcc_lcd] = { - .constraints = { /* default 2.8V */ - .name = "vcc_lcd", - .min_uV = 2700000, - .max_uV = 3300000, - }, - }, - [vcc_io] = { /* Same or higher than everything - * bar vccbat and vccusb */ - .constraints = { /* default 2.8V */ - .name = "vcc_io", - .min_uV = 2692000, - .max_uV = 3300000, - }, - }, - [vcc_sensor_1_8] = { - .constraints = { /* default 1.8V */ - .name = "vcc_sensor_1_8", - .min_uV = 1800000, - .max_uV = 1800000, - }, - }, - [vcc_sensor_3] = { /* curiously default 2.8V */ - .constraints = { - .name = "vcc_sensor_3", - .min_uV = 2800000, - .max_uV = 3000000, - }, - .num_consumer_supplies = ARRAY_SIZE(imote2_sensor_3_con), - .consumer_supplies = imote2_sensor_3_con, - }, - [vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/ - .constraints = { - .name = "vcc_pxa_pll", - .min_uV = 1170000, - .max_uV = 1430000, - }, - }, - [vcc_pxa_usim] = { - .constraints = { /* default 1.8V */ - .name = "vcc_pxa_usim", - .min_uV = 1710000, - .max_uV = 2160000, - }, - }, - [vcc_pxa_mem] = { - .constraints = { /* default 1.8V */ - .name = "vcc_pxa_mem", - .min_uV = 1800000, - .max_uV = 1800000, - }, - }, -}; - -static struct da903x_subdev_info imote2_da9030_subdevs[] = { - { - .name = "da903x-regulator", - .id = DA9030_ID_LDO2, - .platform_data = &imote2_ldo_init_data[vcc_bbio], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO3, - .platform_data = &imote2_ldo_init_data[vcc_bb], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO4, - .platform_data = &imote2_ldo_init_data[vcc_pxa_flash], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO5, - .platform_data = &imote2_ldo_init_data[vcc_cc2420], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO6, - .platform_data = &imote2_ldo_init_data[vcc_vref], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO7, - .platform_data = &imote2_ldo_init_data[vcc_sram_ext], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO8, - .platform_data = &imote2_ldo_init_data[vcc_mica], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO9, - .platform_data = &imote2_ldo_init_data[vcc_bt], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO10, - .platform_data = &imote2_ldo_init_data[vcc_sensor_1_8], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO11, - .platform_data = &imote2_ldo_init_data[vcc_sensor_3], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO12, - .platform_data = &imote2_ldo_init_data[vcc_lcd], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO15, - .platform_data = &imote2_ldo_init_data[vcc_pxa_pll], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO17, - .platform_data = &imote2_ldo_init_data[vcc_pxa_usim], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO18, - .platform_data = &imote2_ldo_init_data[vcc_io], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO19, - .platform_data = &imote2_ldo_init_data[vcc_pxa_mem], - }, -}; - -static struct da903x_platform_data imote2_da9030_pdata = { - .num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs), - .subdevs = imote2_da9030_subdevs, -}; - -/* As the the imote2 doesn't currently have a conventional SD slot - * there is no option to hotplug cards, making all this rather simple - */ -static int imote2_mci_get_ro(struct device *dev) -{ - return 0; -} - -/* Rather simple case as hotplugging not possible */ -static struct pxamci_platform_data imote2_mci_platform_data = { - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */ - .get_ro = imote2_mci_get_ro, - .gpio_card_detect = -1, - .gpio_card_ro = -1, - .gpio_power = -1, -}; - -static struct mtd_partition imote2flash_partitions[] = { - { - .name = "Bootloader", - .size = 0x00040000, - .offset = 0, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "Kernel", - .size = 0x00200000, - .offset = 0x00040000, - .mask_flags = 0, - }, { - .name = "Filesystem", - .size = 0x01DC0000, - .offset = 0x00240000, - .mask_flags = 0, - }, -}; - -static struct resource flash_resources = { - .start = PXA_CS0_PHYS, - .end = PXA_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct flash_platform_data imote2_flash_data = { - .map_name = "cfi_probe", - .parts = imote2flash_partitions, - .nr_parts = ARRAY_SIZE(imote2flash_partitions), - .name = "PXA27xOnChipROM", - .width = 2, -}; - -static struct platform_device imote2_flash_device = { - .name = "pxa2xx-flash", - .id = 0, - .dev = { - .platform_data = &imote2_flash_data, - }, - .resource = &flash_resources, - .num_resources = 1, -}; - -/* Some of the drivers here are out of kernel at the moment (parts of IIO) - * and it may be a while before they are in the mainline. - */ -static struct i2c_board_info __initdata imote2_i2c_board_info[] = { - { /* UCAM sensor board */ - .type = "max1239", - .addr = 0x35, - }, { /* ITS400 Sensor board only */ - .type = "max1363", - .addr = 0x34, - /* Through a nand gate - Also beware, on V2 sensor board the - * pull up resistors are missing. - */ - .irq = IRQ_GPIO(99), - }, { /* ITS400 Sensor board only */ - .type = "tsl2561", - .addr = 0x49, - /* Through a nand gate - Also beware, on V2 sensor board the - * pull up resistors are missing. - */ - .irq = IRQ_GPIO(99), - }, { /* ITS400 Sensor board only */ - .type = "tmp175", - .addr = 0x4A, - .irq = IRQ_GPIO(96), - }, { /* IMB400 Multimedia board */ - .type = "wm8940", - .addr = 0x1A, - }, -}; - -static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = { - { - .type = "da9030", - .addr = 0x49, - .platform_data = &imote2_da9030_pdata, - .irq = gpio_to_irq(1), - }, -}; - -static struct pxa2xx_spi_master pxa_ssp_master_0_info = { - .num_chipselect = 1, -}; - -static struct pxa2xx_spi_master pxa_ssp_master_1_info = { - .num_chipselect = 1, -}; - -static struct pxa2xx_spi_master pxa_ssp_master_2_info = { - .num_chipselect = 1, -}; - -static struct pxa2xx_spi_chip staccel_chip_info = { - .tx_threshold = 8, - .rx_threshold = 8, - .dma_burst_size = 8, - .timeout = 235, - .gpio_cs = 24, -}; - -static struct pxa2xx_spi_chip cc2420_info = { - .tx_threshold = 8, - .rx_threshold = 8, - .dma_burst_size = 8, - .timeout = 235, - .gpio_cs = 39, -}; - -static struct spi_board_info spi_board_info[] __initdata = { - { /* Driver in IIO */ - .modalias = "lis3l02dq", - .max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */ - .bus_num = 1, - .chip_select = 0, - .controller_data = &staccel_chip_info, - .irq = IRQ_GPIO(96), - }, { /* Driver out of kernel as it needs considerable rewriting */ - .modalias = "cc2420", - .max_speed_hz = 6500000, - .bus_num = 3, - .chip_select = 0, - .controller_data = &cc2420_info, - }, -}; - -static void im2_udc_command(int cmd) -{ - switch (cmd) { - case PXA2XX_UDC_CMD_CONNECT: - UP2OCR |= UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE; - break; - case PXA2XX_UDC_CMD_DISCONNECT: - UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE); - break; - } -} - -static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = { - .udc_command = im2_udc_command, -}; - -static struct platform_device *imote2_devices[] = { - &imote2_flash_device, - &imote2_leds, - &sht15, -}; - -static struct i2c_pxa_platform_data i2c_pwr_pdata = { - .fast_mode = 1, -}; - -static struct i2c_pxa_platform_data i2c_pdata = { - .fast_mode = 1, -}; - -static void __init imote2_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config)); - - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - - platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices)); - - pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info); - pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info); - pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info); - - spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); - - i2c_register_board_info(0, imote2_i2c_board_info, - ARRAY_SIZE(imote2_i2c_board_info)); - i2c_register_board_info(1, imote2_pwr_i2c_board_info, - ARRAY_SIZE(imote2_pwr_i2c_board_info)); - - pxa27x_set_i2c_power_info(&i2c_pwr_pdata); - pxa_set_i2c_info(&i2c_pdata); - - pxa_set_mci_info(&imote2_mci_platform_data); - pxa_set_udc_info(&imote2_udc_info); -} - -MACHINE_START(INTELMOTE2, "IMOTE 2") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .map_io = pxa_map_io, - .init_irq = pxa27x_init_irq, - .timer = &pxa_timer, - .init_machine = imote2_init, - .boot_params = 0xA0000100, -MACHINE_END diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h index 1a741065045f..eec92e6fd7cf 100644 --- a/arch/arm/mach-pxa/include/mach/balloon3.h +++ b/arch/arm/mach-pxa/include/mach/balloon3.h @@ -26,21 +26,55 @@ enum balloon3_features { #define BALLOON3_FPGA_VIRT (0xf1000000) /* as per balloon2 */ #define BALLOON3_FPGA_LENGTH 0x01000000 -/* FPGA/CPLD registers */ -#define BALLOON3_PCMCIA0_REG (BALLOON3_FPGA_VIRT + 0x00e00008) -/* fixme - same for now */ -#define BALLOON3_PCMCIA1_REG (BALLOON3_FPGA_VIRT + 0x00e00008) -#define BALLOON3_NANDIO_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000) +/* FPGA / CPLD registers for CF socket */ +#define BALLOON3_CF_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00e00008) +#define BALLOON3_CF_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e00008) +/* FPGA / CPLD version register */ +#define BALLOON3_FPGA_VER (BALLOON3_FPGA_VIRT + 0x00e0001c) +/* FPGA / CPLD registers for NAND flash */ +#define BALLOON3_NAND_BASE (PXA_CS4_PHYS + 0x00e00000) +#define BALLOON3_NAND_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000) +#define BALLOON3_NAND_CONTROL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010) +#define BALLOON3_NAND_STAT_REG (BALLOON3_FPGA_VIRT + 0x00e00010) +#define BALLOON3_NAND_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e00014) + /* fpga/cpld interrupt control register */ #define BALLOON3_INT_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e0000C) -#define BALLOON3_NANDIO_CTL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010) -#define BALLOON3_NANDIO_CTL_REG (BALLOON3_FPGA_VIRT + 0x00e00014) #define BALLOON3_VERSION_REG (BALLOON3_FPGA_VIRT + 0x00e0001c) #define BALLOON3_SAMOSA_ADDR_REG (BALLOON3_FPGA_VIRT + 0x00c00000) #define BALLOON3_SAMOSA_DATA_REG (BALLOON3_FPGA_VIRT + 0x00c00004) #define BALLOON3_SAMOSA_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00c0001c) +/* CF Status Register bits (read-only) bits */ +#define BALLOON3_CF_nIRQ (1 << 0) +#define BALLOON3_CF_nSTSCHG_BVD1 (1 << 1) + +/* CF Control Set Register bits / CF Control Clear Register bits (write-only) */ +#define BALLOON3_CF_RESET (1 << 0) +#define BALLOON3_CF_ENABLE (1 << 1) +#define BALLOON3_CF_ADD_ENABLE (1 << 2) + +/* CF Interrupt sources */ +#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0) +#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1) + +/* NAND Control register */ +#define BALLOON3_NAND_CONTROL_FLWP (1 << 7) +#define BALLOON3_NAND_CONTROL_FLSE (1 << 6) +#define BALLOON3_NAND_CONTROL_FLCE3 (1 << 5) +#define BALLOON3_NAND_CONTROL_FLCE2 (1 << 4) +#define BALLOON3_NAND_CONTROL_FLCE1 (1 << 3) +#define BALLOON3_NAND_CONTROL_FLCE0 (1 << 2) +#define BALLOON3_NAND_CONTROL_FLALE (1 << 1) +#define BALLOON3_NAND_CONTROL_FLCLE (1 << 0) + +/* NAND Status register */ +#define BALLOON3_NAND_STAT_RNB (1 << 0) + +/* NAND Control2 register */ +#define BALLOON3_NAND_CONTROL2_16BIT (1 << 0) + /* GPIOs for irqs */ #define BALLOON3_GPIO_AUX_NIRQ (94) #define BALLOON3_GPIO_CODEC_IRQ (95) @@ -54,20 +88,24 @@ enum balloon3_features { #define BALLOON3_GPIO_S0_CD (105) +/* NAND */ +#define BALLOON3_GPIO_RUN_NAND (102) + +/* PCF8574A Leds */ +#define BALLOON3_PCF_GPIO_BASE 160 +#define BALLOON3_PCF_GPIO_LED0 (BALLOON3_PCF_GPIO_BASE + 0) +#define BALLOON3_PCF_GPIO_LED1 (BALLOON3_PCF_GPIO_BASE + 1) +#define BALLOON3_PCF_GPIO_LED2 (BALLOON3_PCF_GPIO_BASE + 2) +#define BALLOON3_PCF_GPIO_LED3 (BALLOON3_PCF_GPIO_BASE + 3) +#define BALLOON3_PCF_GPIO_LED4 (BALLOON3_PCF_GPIO_BASE + 4) +#define BALLOON3_PCF_GPIO_LED5 (BALLOON3_PCF_GPIO_BASE + 5) +#define BALLOON3_PCF_GPIO_LED6 (BALLOON3_PCF_GPIO_BASE + 6) +#define BALLOON3_PCF_GPIO_LED7 (BALLOON3_PCF_GPIO_BASE + 7) + /* FPGA Interrupt Mask/Acknowledge Register */ #define BALLOON3_INT_S0_IRQ (1 << 0) /* PCMCIA 0 IRQ */ #define BALLOON3_INT_S0_STSCHG (1 << 1) /* PCMCIA 0 status changed */ -/* CF Status Register */ -#define BALLOON3_PCMCIA_nIRQ (1 << 0) /* IRQ / ready signal */ -#define BALLOON3_PCMCIA_nSTSCHG_BVD1 (1 << 1) - /* VDD sense / card status changed */ - -/* CF control register (write) */ -#define BALLOON3_PCMCIA_RESET (1 << 0) /* Card reset signal */ -#define BALLOON3_PCMCIA_ENABLE (1 << 1) -#define BALLOON3_PCMCIA_ADD_ENABLE (1 << 2) - /* CPLD (and FPGA) interface definitions */ #define CPLD_LCD0_DATA_SET 0x00 #define CPLD_LCD0_DATA_CLR 0x10 @@ -132,9 +170,6 @@ enum balloon3_features { /* Balloon3 Interrupts */ #define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x)) -#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0) -#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1) - #define BALLOON3_AUX_NIRQ IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ) #define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ) #define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD) diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 5f2ba8d9015c..58dada11054f 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -5,6 +5,27 @@ #include <mach/mfp.h> /* + * base board glue for PXA270 module + */ + +enum { + COLIBRI_PXA270_EVALBOARD = 0, + COLIBRI_PXA270_INCOME, +}; + +#if defined(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD) +extern void colibri_pxa270_evalboard_init(void); +#else +static inline void colibri_pxa270_evalboard_init(void) {} +#endif + +#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME) +extern void colibri_pxa270_income_boardinit(void); +#else +static inline void colibri_pxa270_income_boardinit(void) {} +#endif + +/* * common settings for all modules */ @@ -33,13 +54,10 @@ static inline void colibri_pxa3xx_init_nand(void) {} /* physical memory regions */ #define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */ -/* definitions for Colibri PXA270 */ - -#define COLIBRI_PXA270_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */ -#define COLIBRI_PXA270_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet */ -#define COLIBRI_PXA270_ETH_IRQ_GPIO 114 -#define COLIBRI_PXA270_ETH_IRQ \ - gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO)) +/* GPIO definitions for Colibri PXA270 */ +#define GPIO114_COLIBRI_PXA270_ETH_IRQ 114 +#define GPIO0_COLIBRI_PXA270_SD_DETECT 0 +#define GPIO113_COLIBRI_PXA270_TS_IRQ 113 #endif /* _COLIBRI_H_ */ diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h index 585970ef08ce..0011055bc3f9 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/include/mach/corgi.h @@ -109,10 +109,5 @@ #define CORGI_GPIO_BACKLIGHT_CONT (CORGI_SCOOP_GPIO_BASE + 7) #define CORGI_GPIO_MIC_BIAS (CORGI_SCOOP_GPIO_BASE + 8) -/* - * Shared data structures - */ -extern struct platform_device corgiscoop_device; - #endif /* __ASM_ARCH_CORGI_H */ diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h index 06abd4160607..9b898680b206 100644 --- a/arch/arm/mach-pxa/include/mach/gumstix.h +++ b/arch/arm/mach-pxa/include/mach/gumstix.h @@ -14,25 +14,15 @@ /* GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean -interrupt signal for determining cable presence. On the original gumstix, -this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F, +interrupt signal for determining cable presence. On the gumstix F, this moves to GPIO17 and GPIO37. */ /* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn has detected a cable insertion; driven low otherwise. */ -#ifdef CONFIG_ARCH_GUMSTIX_ORIG - -#define GPIO_GUMSTIX_USB_GPIOn 81 -#define GPIO_GUMSTIX_USB_GPIOx 83 - -#else - #define GPIO_GUMSTIX_USB_GPIOn 35 #define GPIO_GUMSTIX_USB_GPIOx 41 -#endif - /* usb state change */ #define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn) diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index 3d8d8cb09685..7f64d24cd564 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -14,11 +14,6 @@ #define __ASM_ARCH_HARDWARE_H /* - * We requires absolute addresses. - */ -#define PCIO_BASE 0 - -/* * Workarounds for at least 2 errata so far require this. * The mapping is set in mach-pxa/generic.c. */ diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/include/mach/palm27x.h new file mode 100644 index 000000000000..0a5e5eadebf5 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/palm27x.h @@ -0,0 +1,81 @@ +/* + * Common functions for Palm LD, T5, TX, Z72 + * + * Copyright (C) 2010 + * Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef __INCLUDE_MACH_PALM27X__ +#define __INCLUDE_MACH_PALM27X__ + +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +extern void __init palm27x_mmc_init(int detect, int ro, int power, + int power_inverted); +#else +static inline void palm27x_mmc_init(int detect, int ro, int power, + int power_inverted) +{} +#endif + +#if defined(CONFIG_SUSPEND) +extern void __init palm27x_pm_init(unsigned long str_base); +#else +static inline void palm27x_pm_init(unsigned long str_base) {} +#endif + +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +extern struct pxafb_mode_info palm_320x480_lcd_mode; +extern struct pxafb_mode_info palm_320x320_lcd_mode; +extern struct pxafb_mode_info palm_320x320_new_lcd_mode; +extern void __init palm27x_lcd_init(int power, + struct pxafb_mode_info *mode); +#else +static inline void palm27x_lcd_init(int power, struct pxafb_mode_info *mode) {} +#endif + +#if defined(CONFIG_USB_GADGET_PXA27X) || \ + defined(CONFIG_USB_GADGET_PXA27X_MODULE) +extern void __init palm27x_udc_init(int vbus, int pullup, + int vbus_inverted); +#else +static inline void palm27x_udc_init(int vbus, int pullup, int vbus_inverted) {} +#endif + +#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE) +extern void __init palm27x_irda_init(int pwdn); +#else +static inline void palm27x_irda_init(int pwdn) {} +#endif + +#if defined(CONFIG_TOUCHSCREEN_WM97XX) || \ + defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE) +extern void __init palm27x_ac97_init(int minv, int maxv, int jack, + int reset); +#else +static inline void palm27x_ac97_init(int minv, int maxv, int jack, int reset) {} +#endif + +#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +extern void __init palm27x_pwm_init(int bl, int lcd); +#else +static inline void palm27x_pwm_init(int bl, int lcd) {} +#endif + +#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE) +extern void __init palm27x_power_init(int ac, int usb); +#else +static inline void palm27x_power_init(int ac, int usb) {} +#endif + +#if defined(CONFIG_REGULATOR_MAX1586) || \ + defined(CONFIG_REGULATOR_MAX1586_MODULE) +extern void __init palm27x_pmic_init(void); +#else +static inline void palm27x_pmic_init(void) {} +#endif + +#endif /* __INCLUDE_MACH_PALM27X__ */ diff --git a/arch/arm/mach-pxa/include/mach/pata_pxa.h b/arch/arm/mach-pxa/include/mach/pata_pxa.h new file mode 100644 index 000000000000..6cf7df1d5830 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pata_pxa.h @@ -0,0 +1,33 @@ +/* + * Generic PXA PATA driver + * + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __MACH_PATA_PXA_H__ +#define __MACH_PATA_PXA_H__ + +struct pata_pxa_pdata { + /* PXA DMA DREQ<0:2> pin */ + uint32_t dma_dreq; + /* Register shift */ + uint32_t reg_shift; + /* IRQ flags */ + uint32_t irq_flags; +}; + +#endif /* __MACH_PATA_PXA_H__ */ diff --git a/arch/arm/mach-pxa/include/mach/sharpsl.h b/arch/arm/mach-pxa/include/mach/sharpsl.h deleted file mode 100644 index 8242e14a44fa..000000000000 --- a/arch/arm/mach-pxa/include/mach/sharpsl.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * SharpSL SSP Driver - */ - -unsigned long corgi_ssp_ads7846_putget(unsigned long); -unsigned long corgi_ssp_ads7846_get(void); -void corgi_ssp_ads7846_put(unsigned long data); -void corgi_ssp_ads7846_lock(void); -void corgi_ssp_ads7846_unlock(void); -void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data); -void corgi_ssp_blduty_set(int duty); -int corgi_ssp_max1111_get(unsigned long data); - -/* - * SharpSL Touchscreen Driver - */ - -struct corgits_machinfo { - unsigned long (*get_hsync_invperiod)(void); - void (*put_hsync)(void); - void (*wait_hsync)(void); -}; - - -/* - * SharpSL Backlight - */ -extern void corgibl_limit_intensity(int limit); -extern void corgi_lcd_limit_intensity(int limit); - - -/* - * SharpSL Battery/PM Driver - */ -extern void sharpsl_battery_kick(void); diff --git a/arch/arm/mach-pxa/include/mach/sharpsl_pm.h b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h index 1920dc6b05dc..905be6755f04 100644 --- a/arch/arm/mach-pxa/include/mach/sharpsl_pm.h +++ b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h @@ -93,6 +93,8 @@ struct sharpsl_pm_status { extern struct sharpsl_pm_status sharpsl_pm; +extern struct battery_thresh sharpsl_battery_levels_acin[]; +extern struct battery_thresh sharpsl_battery_levels_noac[]; #define SHARPSL_LED_ERROR 2 #define SHARPSL_LED_ON 1 @@ -101,4 +103,11 @@ extern struct sharpsl_pm_status sharpsl_pm; void sharpsl_battery_kick(void); void sharpsl_pm_led(int val); +/* MAX1111 Channel Definitions */ +#define MAX1111_BATT_VOLT 4u +#define MAX1111_BATT_TEMP 2u +#define MAX1111_ACIN_VOLT 6u +int sharpsl_pm_pxa_read_max1111(int channel); + +void corgi_lcd_limit_intensity(int limit); #endif diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h index fa1998caa78e..685749a51c42 100644 --- a/arch/arm/mach-pxa/include/mach/spitz.h +++ b/arch/arm/mach-pxa/include/mach/spitz.h @@ -185,7 +185,5 @@ /* * Shared data structures */ -extern struct platform_device spitzscoop_device; -extern struct platform_device spitzscoop2_device; extern struct platform_device spitzssp_device; extern struct sharpsl_charger_machinfo spitz_pm_machinfo; diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index fa6a708b4099..dc66942ef9ab 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -34,7 +34,7 @@ #include <linux/irq.h> #include <linux/pda_power.h> #include <linux/power_supply.h> -#include <linux/wm97xx_batt.h> +#include <linux/wm97xx.h> #include <linux/mtd/physmap.h> #include <linux/usb/gpio_vbus.h> #include <linux/regulator/max1586.h> @@ -636,7 +636,7 @@ static struct platform_device power_dev = { }, }; -static struct wm97xx_batt_info mioa701_battery_data = { +static struct wm97xx_batt_pdata mioa701_battery_data = { .batt_aux = WM97XX_AUX_ID1, .temp_aux = -1, .charge_gpio = -1, @@ -648,6 +648,10 @@ static struct wm97xx_batt_info mioa701_battery_data = { .batt_name = "mioa701_battery", }; +static struct wm97xx_pdata mioa701_wm97xx_pdata = { + .batt_pdata = &mioa701_battery_data, +}; + /* * Voltage regulation */ @@ -716,6 +720,7 @@ struct i2c_pxa_platform_data i2c_pdata = { static pxa2xx_audio_ops_t mioa701_ac97_info = { .reset_gpio = 95, + .codec_pdata = { &mioa701_wm97xx_pdata, }, }; /* @@ -794,7 +799,6 @@ static void __init mioa701_machine_init(void) set_pxa_fb_info(&mioa701_pxafb_info); pxa_set_mci_info(&mioa701_mci_info); pxa_set_keypad_info(&mioa701_keypad_info); - wm97xx_bat_set_pdata(&mioa701_battery_data); pxa_set_udc_info(&mioa701_udc_info); pxa_set_ac97_info(&mioa701_ac97_info); pm_power_off = mioa701_poweroff; diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c new file mode 100644 index 000000000000..77ad6d34ab5b --- /dev/null +++ b/arch/arm/mach-pxa/palm27x.c @@ -0,0 +1,477 @@ +/* + * Common code for Palm LD, T5, TX, Z72 + * + * Copyright (C) 2010 + * Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/pda_power.h> +#include <linux/pwm_backlight.h> +#include <linux/gpio.h> +#include <linux/wm97xx.h> +#include <linux/power_supply.h> +#include <linux/usb/gpio_vbus.h> +#include <linux/regulator/max1586.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/pxa27x.h> +#include <mach/audio.h> +#include <mach/mmc.h> +#include <mach/pxafb.h> +#include <mach/irda.h> +#include <mach/udc.h> +#include <mach/palmasoc.h> +#include <mach/palm27x.h> + +#include <plat/i2c.h> + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +static struct pxamci_platform_data palm27x_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .detect_delay_ms = 200, +}; + +void __init palm27x_mmc_init(int detect, int ro, int power, + int power_inverted) +{ + palm27x_mci_platform_data.gpio_card_detect = detect; + palm27x_mci_platform_data.gpio_card_ro = ro; + palm27x_mci_platform_data.gpio_power = power; + palm27x_mci_platform_data.gpio_power_invert = power_inverted; + + pxa_set_mci_info(&palm27x_mci_platform_data); +} +#endif + +/****************************************************************************** + * Power management - standby + ******************************************************************************/ +#if defined(CONFIG_SUSPEND) +void __init palm27x_pm_init(unsigned long str_base) +{ + static const unsigned long resume[] = { + 0xe3a00101, /* mov r0, #0x40000000 */ + 0xe380060f, /* orr r0, r0, #0x00f00000 */ + 0xe590f008, /* ldr pc, [r0, #0x08] */ + }; + + /* + * Copy the bootloader. + * NOTE: PalmZ72 uses a different wakeup method! + */ + memcpy(phys_to_virt(str_base), resume, sizeof(resume)); +} +#endif + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +struct pxafb_mode_info palm_320x480_lcd_mode = { + .pixclock = 57692, + .xres = 320, + .yres = 480, + .bpp = 16, + + .left_margin = 32, + .right_margin = 1, + .upper_margin = 7, + .lower_margin = 1, + + .hsync_len = 4, + .vsync_len = 1, +}; + +struct pxafb_mode_info palm_320x320_lcd_mode = { + .pixclock = 115384, + .xres = 320, + .yres = 320, + .bpp = 16, + + .left_margin = 27, + .right_margin = 7, + .upper_margin = 7, + .lower_margin = 8, + + .hsync_len = 6, + .vsync_len = 1, +}; + +struct pxafb_mode_info palm_320x320_new_lcd_mode = { + .pixclock = 86538, + .xres = 320, + .yres = 320, + .bpp = 16, + + .left_margin = 20, + .right_margin = 8, + .upper_margin = 8, + .lower_margin = 5, + + .hsync_len = 4, + .vsync_len = 1, +}; + +static struct pxafb_mach_info palm27x_lcd_screen = { + .num_modes = 1, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +}; + +static int palm27x_lcd_power; +static void palm27x_lcd_ctl(int on, struct fb_var_screeninfo *info) +{ + gpio_set_value(palm27x_lcd_power, on); +} + +void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode) +{ + palm27x_lcd_screen.modes = mode; + + if (gpio_is_valid(power)) { + if (!gpio_request(power, "LCD power")) { + pr_err("Palm27x: failed to claim lcd power gpio!\n"); + return; + } + if (!gpio_direction_output(power, 1)) { + pr_err("Palm27x: lcd power configuration failed!\n"); + return; + } + palm27x_lcd_power = power; + palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl; + } + + set_pxa_fb_info(&palm27x_lcd_screen); +} +#endif + +/****************************************************************************** + * USB Gadget + ******************************************************************************/ +#if defined(CONFIG_USB_GADGET_PXA27X) || \ + defined(CONFIG_USB_GADGET_PXA27X_MODULE) +static struct gpio_vbus_mach_info palm27x_udc_info = { + .gpio_vbus_inverted = 1, +}; + +static struct platform_device palm27x_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &palm27x_udc_info, + }, +}; + +void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted) +{ + palm27x_udc_info.gpio_vbus = vbus; + palm27x_udc_info.gpio_pullup = pullup; + + palm27x_udc_info.gpio_vbus_inverted = vbus_inverted; + + if (!gpio_request(pullup, "USB Pullup")) { + gpio_direction_output(pullup, + palm27x_udc_info.gpio_vbus_inverted); + gpio_free(pullup); + } else + return; + + platform_device_register(&palm27x_gpio_vbus); +} +#endif + +/****************************************************************************** + * IrDA + ******************************************************************************/ +#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE) +static struct pxaficp_platform_data palm27x_ficp_platform_data = { + .transceiver_cap = IR_SIRMODE | IR_OFF, +}; + +void __init palm27x_irda_init(int pwdn) +{ + palm27x_ficp_platform_data.gpio_pwdown = pwdn; + pxa_set_ficp_info(&palm27x_ficp_platform_data); +} +#endif + +/****************************************************************************** + * WM97xx audio, battery + ******************************************************************************/ +#if defined(CONFIG_TOUCHSCREEN_WM97XX) || \ + defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE) +static struct wm97xx_batt_pdata palm27x_batt_pdata = { + .batt_aux = WM97XX_AUX_ID3, + .temp_aux = WM97XX_AUX_ID2, + .charge_gpio = -1, + .batt_mult = 1000, + .batt_div = 414, + .temp_mult = 1, + .temp_div = 1, + .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO, + .batt_name = "main-batt", +}; + +static struct wm97xx_pdata palm27x_wm97xx_pdata = { + .batt_pdata = &palm27x_batt_pdata, +}; + +static pxa2xx_audio_ops_t palm27x_ac97_pdata = { + .codec_pdata = { &palm27x_wm97xx_pdata, }, +}; + +static struct palm27x_asoc_info palm27x_asoc_pdata = { + .jack_gpio = -1, +}; + +static struct platform_device palm27x_asoc = { + .name = "palm27x-asoc", + .id = -1, + .dev = { + .platform_data = &palm27x_asoc_pdata, + }, +}; + +void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset) +{ + palm27x_ac97_pdata.reset_gpio = reset; + palm27x_asoc_pdata.jack_gpio = jack; + + if (minv < 0 || maxv < 0) { + palm27x_ac97_pdata.codec_pdata[0] = NULL; + pxa_set_ac97_info(&palm27x_ac97_pdata); + } else { + palm27x_batt_pdata.min_voltage = minv, + palm27x_batt_pdata.max_voltage = maxv, + + pxa_set_ac97_info(&palm27x_ac97_pdata); + platform_device_register(&palm27x_asoc); + } +} +#endif + +/****************************************************************************** + * Backlight + ******************************************************************************/ +#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static int palm_bl_power; +static int palm_lcd_power; + +static int palm27x_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(palm_bl_power, "BL POWER"); + if (ret) + goto err; + ret = gpio_direction_output(palm_bl_power, 0); + if (ret) + goto err2; + + if (gpio_is_valid(palm_lcd_power)) { + ret = gpio_request(palm_lcd_power, "LCD POWER"); + if (ret) + goto err2; + ret = gpio_direction_output(palm_lcd_power, 0); + if (ret) + goto err3; + } + + return 0; +err3: + gpio_free(palm_lcd_power); +err2: + gpio_free(palm_bl_power); +err: + return ret; +} + +static int palm27x_backlight_notify(struct device *dev, int brightness) +{ + gpio_set_value(palm_bl_power, brightness); + if (gpio_is_valid(palm_lcd_power)) + gpio_set_value(palm_lcd_power, brightness); + return brightness; +} + +static void palm27x_backlight_exit(struct device *dev) +{ + gpio_free(palm_bl_power); + if (gpio_is_valid(palm_lcd_power)) + gpio_free(palm_lcd_power); +} + +static struct platform_pwm_backlight_data palm27x_backlight_data = { + .pwm_id = 0, + .max_brightness = 0xfe, + .dft_brightness = 0x7e, + .pwm_period_ns = 3500, + .init = palm27x_backlight_init, + .notify = palm27x_backlight_notify, + .exit = palm27x_backlight_exit, +}; + +static struct platform_device palm27x_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &palm27x_backlight_data, + }, +}; + +void __init palm27x_pwm_init(int bl, int lcd) +{ + palm_bl_power = bl; + palm_lcd_power = lcd; + platform_device_register(&palm27x_backlight); +} +#endif + +/****************************************************************************** + * Power supply + ******************************************************************************/ +#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE) +static int palm_ac_state; +static int palm_usb_state; + +static int palm27x_power_supply_init(struct device *dev) +{ + int ret; + + ret = gpio_request(palm_ac_state, "AC state"); + if (ret) + goto err1; + ret = gpio_direction_input(palm_ac_state); + if (ret) + goto err2; + + if (gpio_is_valid(palm_usb_state)) { + ret = gpio_request(palm_usb_state, "USB state"); + if (ret) + goto err2; + ret = gpio_direction_input(palm_usb_state); + if (ret) + goto err3; + } + + return 0; +err3: + gpio_free(palm_usb_state); +err2: + gpio_free(palm_ac_state); +err1: + return ret; +} + +static void palm27x_power_supply_exit(struct device *dev) +{ + gpio_free(palm_usb_state); + gpio_free(palm_ac_state); +} + +static int palm27x_is_ac_online(void) +{ + return gpio_get_value(palm_ac_state); +} + +static int palm27x_is_usb_online(void) +{ + return !gpio_get_value(palm_usb_state); +} +static char *palm27x_supplicants[] = { + "main-battery", +}; + +static struct pda_power_pdata palm27x_ps_info = { + .init = palm27x_power_supply_init, + .exit = palm27x_power_supply_exit, + .is_ac_online = palm27x_is_ac_online, + .is_usb_online = palm27x_is_usb_online, + .supplied_to = palm27x_supplicants, + .num_supplicants = ARRAY_SIZE(palm27x_supplicants), +}; + +static struct platform_device palm27x_power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = &palm27x_ps_info, + }, +}; + +void __init palm27x_power_init(int ac, int usb) +{ + palm_ac_state = ac; + palm_usb_state = usb; + platform_device_register(&palm27x_power_supply); +} +#endif + +/****************************************************************************** + * Core power regulator + ******************************************************************************/ +#if defined(CONFIG_REGULATOR_MAX1586) || \ + defined(CONFIG_REGULATOR_MAX1586_MODULE) +static struct regulator_consumer_supply palm27x_max1587a_consumers[] = { + { + .supply = "vcc_core", + } +}; + +static struct regulator_init_data palm27x_max1587a_v3_info = { + .constraints = { + .name = "vcc_core range", + .min_uV = 900000, + .max_uV = 1705000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .consumer_supplies = palm27x_max1587a_consumers, + .num_consumer_supplies = ARRAY_SIZE(palm27x_max1587a_consumers), +}; + +static struct max1586_subdev_data palm27x_max1587a_subdevs[] = { + { + .name = "vcc_core", + .id = MAX1586_V3, + .platform_data = &palm27x_max1587a_v3_info, + } +}; + +static struct max1586_platform_data palm27x_max1587a_info = { + .subdevs = palm27x_max1587a_subdevs, + .num_subdevs = ARRAY_SIZE(palm27x_max1587a_subdevs), + .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */ +}; + +static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = { + { + I2C_BOARD_INFO("max1586", 0x14), + .platform_data = &palm27x_max1587a_info, + }, +}; + +void __init palm27x_pmic_init(void) +{ + i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info)); + pxa27x_set_i2c_power_info(NULL); +} +#endif diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 1963819dba98..91038eeafe44 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -22,7 +22,7 @@ #include <linux/pda_power.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> -#include <linux/wm97xx_batt.h> +#include <linux/wm97xx.h> #include <linux/power_supply.h> #include <linux/sysdev.h> #include <linux/mtd/mtd.h> @@ -41,6 +41,7 @@ #include <mach/irda.h> #include <mach/pxa27x_keypad.h> #include <mach/palmasoc.h> +#include <mach/palm27x.h> #include "generic.h" #include "devices.h" @@ -127,6 +128,7 @@ static unsigned long palmld_pin_config[] __initdata = { /****************************************************************************** * NOR Flash ******************************************************************************/ +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition palmld_partitions[] = { { .name = "Flash", @@ -160,20 +162,18 @@ static struct platform_device palmld_flash = { }, }; -/****************************************************************************** - * SD/MMC card controller - ******************************************************************************/ -static struct pxamci_platform_data palmld_mci_platform_data = { - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .gpio_card_detect = GPIO_NR_PALMLD_SD_DETECT_N, - .gpio_card_ro = GPIO_NR_PALMLD_SD_READONLY, - .gpio_power = GPIO_NR_PALMLD_SD_POWER, - .detect_delay_ms = 200, -}; +static void __init palmld_nor_init(void) +{ + platform_device_register(&palmld_flash); +} +#else +static inline void palmld_nor_init(void) {} +#endif /****************************************************************************** * GPIO keyboard ******************************************************************************/ +#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) static unsigned int palmld_matrix_keys[] = { KEY(0, 1, KEY_F2), KEY(0, 2, KEY_UP), @@ -200,9 +200,18 @@ static struct pxa27x_keypad_platform_data palmld_keypad_platform_data = { .debounce_interval = 30, }; +static void __init palmld_kpc_init(void) +{ + pxa_set_keypad_info(&palmld_keypad_platform_data); +} +#else +static inline void palmld_kpc_init(void) {} +#endif + /****************************************************************************** * GPIO keys ******************************************************************************/ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) static struct gpio_keys_button palmld_pxa_buttons[] = { {KEY_F8, GPIO_NR_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" }, {KEY_F9, GPIO_NR_PALMLD_LOCK_SWITCH, 0, "Lock Switch" }, @@ -222,77 +231,18 @@ static struct platform_device palmld_pxa_keys = { }, }; -/****************************************************************************** - * Backlight - ******************************************************************************/ -static int palmld_backlight_init(struct device *dev) -{ - int ret; - - ret = gpio_request(GPIO_NR_PALMLD_BL_POWER, "BL POWER"); - if (ret) - goto err; - ret = gpio_direction_output(GPIO_NR_PALMLD_BL_POWER, 0); - if (ret) - goto err2; - ret = gpio_request(GPIO_NR_PALMLD_LCD_POWER, "LCD POWER"); - if (ret) - goto err2; - ret = gpio_direction_output(GPIO_NR_PALMLD_LCD_POWER, 0); - if (ret) - goto err3; - - return 0; -err3: - gpio_free(GPIO_NR_PALMLD_LCD_POWER); -err2: - gpio_free(GPIO_NR_PALMLD_BL_POWER); -err: - return ret; -} - -static int palmld_backlight_notify(struct device *dev, int brightness) +static void __init palmld_keys_init(void) { - gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness); - gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness); - return brightness; + platform_device_register(&palmld_pxa_keys); } - -static void palmld_backlight_exit(struct device *dev) -{ - gpio_free(GPIO_NR_PALMLD_BL_POWER); - gpio_free(GPIO_NR_PALMLD_LCD_POWER); -} - -static struct platform_pwm_backlight_data palmld_backlight_data = { - .pwm_id = 0, - .max_brightness = PALMLD_MAX_INTENSITY, - .dft_brightness = PALMLD_MAX_INTENSITY, - .pwm_period_ns = PALMLD_PERIOD_NS, - .init = palmld_backlight_init, - .notify = palmld_backlight_notify, - .exit = palmld_backlight_exit, -}; - -static struct platform_device palmld_backlight = { - .name = "pwm-backlight", - .dev = { - .parent = &pxa27x_device_pwm0.dev, - .platform_data = &palmld_backlight_data, - }, -}; - -/****************************************************************************** - * IrDA - ******************************************************************************/ -static struct pxaficp_platform_data palmld_ficp_platform_data = { - .gpio_pwdown = GPIO_NR_PALMLD_IR_DISABLE, - .transceiver_cap = IR_SIRMODE | IR_OFF, -}; +#else +static inline void palmld_keys_init(void) {} +#endif /****************************************************************************** * LEDs ******************************************************************************/ +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) struct gpio_led gpio_leds[] = { { .name = "palmld:green:led", @@ -318,174 +268,34 @@ static struct platform_device palmld_leds = { } }; -/****************************************************************************** - * Power supply - ******************************************************************************/ -static int power_supply_init(struct device *dev) -{ - int ret; - - ret = gpio_request(GPIO_NR_PALMLD_POWER_DETECT, "CABLE_STATE_AC"); - if (ret) - goto err1; - ret = gpio_direction_input(GPIO_NR_PALMLD_POWER_DETECT); - if (ret) - goto err2; - - ret = gpio_request(GPIO_NR_PALMLD_USB_DETECT_N, "CABLE_STATE_USB"); - if (ret) - goto err2; - ret = gpio_direction_input(GPIO_NR_PALMLD_USB_DETECT_N); - if (ret) - goto err3; - - return 0; - -err3: - gpio_free(GPIO_NR_PALMLD_USB_DETECT_N); -err2: - gpio_free(GPIO_NR_PALMLD_POWER_DETECT); -err1: - return ret; -} - -static int palmld_is_ac_online(void) +static void __init palmld_leds_init(void) { - return gpio_get_value(GPIO_NR_PALMLD_POWER_DETECT); + platform_device_register(&palmld_leds); } - -static int palmld_is_usb_online(void) -{ - return !gpio_get_value(GPIO_NR_PALMLD_USB_DETECT_N); -} - -static void power_supply_exit(struct device *dev) -{ - gpio_free(GPIO_NR_PALMLD_USB_DETECT_N); - gpio_free(GPIO_NR_PALMLD_POWER_DETECT); -} - -static char *palmld_supplicants[] = { - "main-battery", -}; - -static struct pda_power_pdata power_supply_info = { - .init = power_supply_init, - .is_ac_online = palmld_is_ac_online, - .is_usb_online = palmld_is_usb_online, - .exit = power_supply_exit, - .supplied_to = palmld_supplicants, - .num_supplicants = ARRAY_SIZE(palmld_supplicants), -}; - -static struct platform_device power_supply = { - .name = "pda-power", - .id = -1, - .dev = { - .platform_data = &power_supply_info, - }, -}; - -/****************************************************************************** - * WM97xx battery - ******************************************************************************/ -static struct wm97xx_batt_info wm97xx_batt_pdata = { - .batt_aux = WM97XX_AUX_ID3, - .temp_aux = WM97XX_AUX_ID2, - .charge_gpio = -1, - .max_voltage = PALMLD_BAT_MAX_VOLTAGE, - .min_voltage = PALMLD_BAT_MIN_VOLTAGE, - .batt_mult = 1000, - .batt_div = 414, - .temp_mult = 1, - .temp_div = 1, - .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO, - .batt_name = "main-batt", -}; - -/****************************************************************************** - * aSoC audio - ******************************************************************************/ -static struct palm27x_asoc_info palmld_asoc_pdata = { - .jack_gpio = GPIO_NR_PALMLD_EARPHONE_DETECT, -}; - -static pxa2xx_audio_ops_t palmld_ac97_pdata = { - .reset_gpio = 95, -}; - -static struct platform_device palmld_asoc = { - .name = "palm27x-asoc", - .id = -1, - .dev = { - .platform_data = &palmld_asoc_pdata, - }, -}; +#else +static inline void palmld_leds_init(void) {} +#endif /****************************************************************************** * HDD ******************************************************************************/ -static struct platform_device palmld_hdd = { +#if defined(CONFIG_PATA_PALMLD) || defined(CONFIG_PATA_PALMLD_MODULE) +static struct platform_device palmld_ide_device = { .name = "pata_palmld", .id = -1, }; -/****************************************************************************** - * Framebuffer - ******************************************************************************/ -static struct pxafb_mode_info palmld_lcd_modes[] = { -{ - .pixclock = 57692, - .xres = 320, - .yres = 480, - .bpp = 16, - - .left_margin = 32, - .right_margin = 1, - .upper_margin = 7, - .lower_margin = 1, - - .hsync_len = 4, - .vsync_len = 1, -}, -}; - -static struct pxafb_mach_info palmld_lcd_screen = { - .modes = palmld_lcd_modes, - .num_modes = ARRAY_SIZE(palmld_lcd_modes), - .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, -}; - -/****************************************************************************** - * Power management - standby - ******************************************************************************/ -static void __init palmld_pm_init(void) +static void __init palmld_ide_init(void) { - static u32 resume[] = { - 0xe3a00101, /* mov r0, #0x40000000 */ - 0xe380060f, /* orr r0, r0, #0x00f00000 */ - 0xe590f008, /* ldr pc, [r0, #0x08] */ - }; - - /* copy the bootloader */ - memcpy(phys_to_virt(PALMLD_STR_BASE), resume, sizeof(resume)); + platform_device_register(&palmld_ide_device); } +#else +static inline void palmld_ide_init(void) {} +#endif /****************************************************************************** * Machine init ******************************************************************************/ -static struct platform_device *devices[] __initdata = { -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) - &palmld_pxa_keys, -#endif - &palmld_backlight, - &palmld_leds, - &power_supply, - &palmld_asoc, - &palmld_hdd, - &palmld_flash, -}; - static struct map_desc palmld_io_desc[] __initdata = { { .virtual = PALMLD_IDE_VIRT, @@ -510,20 +320,26 @@ static void __init palmld_map_io(void) static void __init palmld_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config)); - pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - palmld_pm_init(); - set_pxa_fb_info(&palmld_lcd_screen); - pxa_set_mci_info(&palmld_mci_platform_data); - pxa_set_ac97_info(&palmld_ac97_pdata); - pxa_set_ficp_info(&palmld_ficp_platform_data); - pxa_set_keypad_info(&palmld_keypad_platform_data); - wm97xx_bat_set_pdata(&wm97xx_batt_pdata); - - platform_add_devices(devices, ARRAY_SIZE(devices)); + palm27x_mmc_init(GPIO_NR_PALMLD_SD_DETECT_N, GPIO_NR_PALMLD_SD_READONLY, + GPIO_NR_PALMLD_SD_POWER, 0); + palm27x_pm_init(PALMLD_STR_BASE); + palm27x_lcd_init(-1, &palm_320x480_lcd_mode); + palm27x_irda_init(GPIO_NR_PALMLD_IR_DISABLE); + palm27x_ac97_init(PALMLD_BAT_MIN_VOLTAGE, PALMLD_BAT_MAX_VOLTAGE, + GPIO_NR_PALMLD_EARPHONE_DETECT, 95); + palm27x_pwm_init(GPIO_NR_PALMLD_BL_POWER, GPIO_NR_PALMLD_LCD_POWER); + palm27x_power_init(GPIO_NR_PALMLD_POWER_DETECT, + GPIO_NR_PALMLD_USB_DETECT_N); + palm27x_pmic_init(); + palmld_kpc_init(); + palmld_keys_init(); + palmld_nor_init(); + palmld_leds_init(); + palmld_ide_init(); } MACHINE_START(PALMLD, "Palm LifeDrive") diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 5e92d84fe50d..1c281995f658 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -25,7 +25,7 @@ #include <linux/pda_power.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> -#include <linux/wm97xx_batt.h> +#include <linux/wm97xx.h> #include <linux/power_supply.h> #include <linux/usb/gpio_vbus.h> @@ -42,6 +42,7 @@ #include <mach/pxa27x_keypad.h> #include <mach/udc.h> #include <mach/palmasoc.h> +#include <mach/palm27x.h> #include "generic.h" #include "devices.h" @@ -104,19 +105,9 @@ static unsigned long palmt5_pin_config[] __initdata = { }; /****************************************************************************** - * SD/MMC card controller - ******************************************************************************/ -static struct pxamci_platform_data palmt5_mci_platform_data = { - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .gpio_card_detect = GPIO_NR_PALMT5_SD_DETECT_N, - .gpio_card_ro = GPIO_NR_PALMT5_SD_READONLY, - .gpio_power = GPIO_NR_PALMT5_SD_POWER, - .detect_delay_ms = 200, -}; - -/****************************************************************************** * GPIO keyboard ******************************************************************************/ +#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) static unsigned int palmt5_matrix_keys[] = { KEY(0, 0, KEY_POWER), KEY(0, 1, KEY_F1), @@ -142,9 +133,18 @@ static struct pxa27x_keypad_platform_data palmt5_keypad_platform_data = { .debounce_interval = 30, }; +static void __init palmt5_kpc_init(void) +{ + pxa_set_keypad_info(&palmt5_keypad_platform_data); +} +#else +static inline void palmt5_kpc_init(void) {} +#endif + /****************************************************************************** * GPIO keys ******************************************************************************/ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) static struct gpio_keys_button palmt5_pxa_buttons[] = { {KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" }, }; @@ -162,241 +162,17 @@ static struct platform_device palmt5_pxa_keys = { }, }; -/****************************************************************************** - * Backlight - ******************************************************************************/ -static int palmt5_backlight_init(struct device *dev) -{ - int ret; - - ret = gpio_request(GPIO_NR_PALMT5_BL_POWER, "BL POWER"); - if (ret) - goto err; - ret = gpio_direction_output(GPIO_NR_PALMT5_BL_POWER, 0); - if (ret) - goto err2; - ret = gpio_request(GPIO_NR_PALMT5_LCD_POWER, "LCD POWER"); - if (ret) - goto err2; - ret = gpio_direction_output(GPIO_NR_PALMT5_LCD_POWER, 0); - if (ret) - goto err3; - - return 0; -err3: - gpio_free(GPIO_NR_PALMT5_LCD_POWER); -err2: - gpio_free(GPIO_NR_PALMT5_BL_POWER); -err: - return ret; -} - -static int palmt5_backlight_notify(struct device *dev, int brightness) -{ - gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness); - gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness); - return brightness; -} - -static void palmt5_backlight_exit(struct device *dev) -{ - gpio_free(GPIO_NR_PALMT5_BL_POWER); - gpio_free(GPIO_NR_PALMT5_LCD_POWER); -} - -static struct platform_pwm_backlight_data palmt5_backlight_data = { - .pwm_id = 0, - .max_brightness = PALMT5_MAX_INTENSITY, - .dft_brightness = PALMT5_MAX_INTENSITY, - .pwm_period_ns = PALMT5_PERIOD_NS, - .init = palmt5_backlight_init, - .notify = palmt5_backlight_notify, - .exit = palmt5_backlight_exit, -}; - -static struct platform_device palmt5_backlight = { - .name = "pwm-backlight", - .dev = { - .parent = &pxa27x_device_pwm0.dev, - .platform_data = &palmt5_backlight_data, - }, -}; - -/****************************************************************************** - * IrDA - ******************************************************************************/ -static struct pxaficp_platform_data palmt5_ficp_platform_data = { - .gpio_pwdown = GPIO_NR_PALMT5_IR_DISABLE, - .transceiver_cap = IR_SIRMODE | IR_OFF, -}; - -/****************************************************************************** - * UDC - ******************************************************************************/ -static struct gpio_vbus_mach_info palmt5_udc_info = { - .gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N, - .gpio_vbus_inverted = 1, - .gpio_pullup = GPIO_NR_PALMT5_USB_PULLUP, -}; - -static struct platform_device palmt5_gpio_vbus = { - .name = "gpio-vbus", - .id = -1, - .dev = { - .platform_data = &palmt5_udc_info, - }, -}; - -/****************************************************************************** - * Power supply - ******************************************************************************/ -static int power_supply_init(struct device *dev) -{ - int ret; - - ret = gpio_request(GPIO_NR_PALMT5_POWER_DETECT, "CABLE_STATE_AC"); - if (ret) - goto err1; - ret = gpio_direction_input(GPIO_NR_PALMT5_POWER_DETECT); - if (ret) - goto err2; - - return 0; -err2: - gpio_free(GPIO_NR_PALMT5_POWER_DETECT); -err1: - return ret; -} - -static int palmt5_is_ac_online(void) -{ - return gpio_get_value(GPIO_NR_PALMT5_POWER_DETECT); -} - -static void power_supply_exit(struct device *dev) -{ - gpio_free(GPIO_NR_PALMT5_POWER_DETECT); -} - -static char *palmt5_supplicants[] = { - "main-battery", -}; - -static struct pda_power_pdata power_supply_info = { - .init = power_supply_init, - .is_ac_online = palmt5_is_ac_online, - .exit = power_supply_exit, - .supplied_to = palmt5_supplicants, - .num_supplicants = ARRAY_SIZE(palmt5_supplicants), -}; - -static struct platform_device power_supply = { - .name = "pda-power", - .id = -1, - .dev = { - .platform_data = &power_supply_info, - }, -}; - -/****************************************************************************** - * WM97xx battery - ******************************************************************************/ -static struct wm97xx_batt_info wm97xx_batt_pdata = { - .batt_aux = WM97XX_AUX_ID3, - .temp_aux = WM97XX_AUX_ID2, - .charge_gpio = -1, - .max_voltage = PALMT5_BAT_MAX_VOLTAGE, - .min_voltage = PALMT5_BAT_MIN_VOLTAGE, - .batt_mult = 1000, - .batt_div = 414, - .temp_mult = 1, - .temp_div = 1, - .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO, - .batt_name = "main-batt", -}; - -/****************************************************************************** - * aSoC audio - ******************************************************************************/ -static struct palm27x_asoc_info palmt5_asoc_pdata = { - .jack_gpio = GPIO_NR_PALMT5_EARPHONE_DETECT, -}; - -static pxa2xx_audio_ops_t palmt5_ac97_pdata = { - .reset_gpio = 95, -}; - -static struct platform_device palmt5_asoc = { - .name = "palm27x-asoc", - .id = -1, - .dev = { - .platform_data = &palmt5_asoc_pdata, - }, -}; - -/****************************************************************************** - * Framebuffer - ******************************************************************************/ -static struct pxafb_mode_info palmt5_lcd_modes[] = { -{ - .pixclock = 57692, - .xres = 320, - .yres = 480, - .bpp = 16, - - .left_margin = 32, - .right_margin = 1, - .upper_margin = 7, - .lower_margin = 1, - - .hsync_len = 4, - .vsync_len = 1, -}, -}; - -static struct pxafb_mach_info palmt5_lcd_screen = { - .modes = palmt5_lcd_modes, - .num_modes = ARRAY_SIZE(palmt5_lcd_modes), - .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, -}; - -/****************************************************************************** - * Power management - standby - ******************************************************************************/ -static void __init palmt5_pm_init(void) +static void __init palmt5_keys_init(void) { - static u32 resume[] = { - 0xe3a00101, /* mov r0, #0x40000000 */ - 0xe380060f, /* orr r0, r0, #0x00f00000 */ - 0xe590f008, /* ldr pc, [r0, #0x08] */ - }; - - /* copy the bootloader */ - memcpy(phys_to_virt(PALMT5_STR_BASE), resume, sizeof(resume)); + platform_device_register(&palmt5_pxa_keys); } +#else +static inline void palmt5_keys_init(void) {} +#endif /****************************************************************************** * Machine init ******************************************************************************/ -static struct platform_device *devices[] __initdata = { -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) - &palmt5_pxa_keys, -#endif - &palmt5_backlight, - &power_supply, - &palmt5_asoc, - &palmt5_gpio_vbus, -}; - -/* setup udc GPIOs initial state */ -static void __init palmt5_udc_init(void) -{ - if (!gpio_request(GPIO_NR_PALMT5_USB_PULLUP, "UDC Vbus")) { - gpio_direction_output(GPIO_NR_PALMT5_USB_PULLUP, 1); - gpio_free(GPIO_NR_PALMT5_USB_PULLUP); - } -} - static void __init palmt5_reserve(void) { memblock_reserve(0xa0200000, 0x1000); @@ -405,21 +181,24 @@ static void __init palmt5_reserve(void) static void __init palmt5_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config)); - pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - palmt5_pm_init(); - set_pxa_fb_info(&palmt5_lcd_screen); - pxa_set_mci_info(&palmt5_mci_platform_data); - palmt5_udc_init(); - pxa_set_ac97_info(&palmt5_ac97_pdata); - pxa_set_ficp_info(&palmt5_ficp_platform_data); - pxa_set_keypad_info(&palmt5_keypad_platform_data); - wm97xx_bat_set_pdata(&wm97xx_batt_pdata); - - platform_add_devices(devices, ARRAY_SIZE(devices)); + palm27x_mmc_init(GPIO_NR_PALMT5_SD_DETECT_N, GPIO_NR_PALMT5_SD_READONLY, + GPIO_NR_PALMT5_SD_POWER, 0); + palm27x_pm_init(PALMT5_STR_BASE); + palm27x_lcd_init(-1, &palm_320x480_lcd_mode); + palm27x_udc_init(GPIO_NR_PALMT5_USB_DETECT_N, + GPIO_NR_PALMT5_USB_PULLUP, 1); + palm27x_irda_init(GPIO_NR_PALMT5_IR_DISABLE); + palm27x_ac97_init(PALMT5_BAT_MIN_VOLTAGE, PALMT5_BAT_MAX_VOLTAGE, + GPIO_NR_PALMT5_EARPHONE_DETECT, 95); + palm27x_pwm_init(GPIO_NR_PALMT5_BL_POWER, GPIO_NR_PALMT5_LCD_POWER); + palm27x_power_init(GPIO_NR_PALMT5_POWER_DETECT, -1); + palm27x_pmic_init(); + palmt5_kpc_init(); + palmt5_keys_init(); } MACHINE_START(PALMT5, "Palm Tungsten|T5") diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 3d284ff1a64e..93c11a0438d5 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -23,7 +23,7 @@ #include <linux/pda_power.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> -#include <linux/wm97xx_batt.h> +#include <linux/wm97xx.h> #include <linux/power_supply.h> #include <linux/usb/gpio_vbus.h> @@ -271,9 +271,9 @@ static struct platform_device power_supply = { }; /****************************************************************************** - * WM97xx battery + * WM97xx audio, battery ******************************************************************************/ -static struct wm97xx_batt_info wm97xx_batt_pdata = { +static struct wm97xx_batt_pdata palmte2_batt_pdata = { .batt_aux = WM97XX_AUX_ID3, .temp_aux = WM97XX_AUX_ID2, .charge_gpio = -1, @@ -287,9 +287,14 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = { .batt_name = "main-batt", }; -/****************************************************************************** - * aSoC audio - ******************************************************************************/ +static struct wm97xx_pdata palmte2_wm97xx_pdata = { + .batt_pdata = &palmte2_batt_pdata, +}; + +static pxa2xx_audio_ops_t palmte2_ac97_pdata = { + .codec_pdata = { &palmte2_wm97xx_pdata, }, +}; + static struct palm27x_asoc_info palmte2_asoc_pdata = { .jack_gpio = GPIO_NR_PALMTE2_EARPHONE_DETECT, }; @@ -361,9 +366,8 @@ static void __init palmte2_init(void) set_pxa_fb_info(&palmte2_lcd_screen); pxa_set_mci_info(&palmte2_mci_platform_data); palmte2_udc_init(); - pxa_set_ac97_info(NULL); + pxa_set_ac97_info(&palmte2_ac97_pdata); pxa_set_ficp_info(&palmte2_ficp_platform_data); - wm97xx_bat_set_pdata(&wm97xx_batt_pdata); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 3d0c9cc2a406..52defd5e42e5 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -24,7 +24,6 @@ #include <linux/pda_power.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> -#include <linux/wm97xx_batt.h> #include <linux/power_supply.h> #include <linux/sysdev.h> #include <linux/w1-gpio.h> @@ -46,6 +45,7 @@ #include <mach/pxa2xx-regs.h> #include <mach/palmasoc.h> #include <mach/camera.h> +#include <mach/palm27x.h> #include <sound/pxa2xx-lib.h> @@ -160,31 +160,9 @@ static unsigned long centro685_pin_config[] __initdata = { #endif /* CONFIG_MACH_CENTRO */ /****************************************************************************** - * SD/MMC card controller - ******************************************************************************/ -#ifdef CONFIG_MACH_TREO680 -static struct pxamci_platform_data treo680_mci_platform_data = { - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .gpio_card_detect = GPIO_NR_TREO_SD_DETECT_N, - .gpio_card_ro = GPIO_NR_TREO680_SD_READONLY, - .gpio_power = GPIO_NR_TREO680_SD_POWER, -}; -#endif /* CONFIG_MACH_TREO680 */ - -#ifdef CONFIG_MACH_CENTRO -static struct pxamci_platform_data centro_mci_platform_data = { - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .gpio_card_detect = GPIO_NR_TREO_SD_DETECT_N, - .gpio_card_ro = -1, - .gpio_power = GPIO_NR_CENTRO_SD_POWER, - .gpio_power_invert = 1, -}; -#endif /* CONFIG_MACH_CENTRO */ - -/****************************************************************************** * GPIO keyboard ******************************************************************************/ -#ifdef CONFIG_MACH_TREO680 +#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) static unsigned int treo680_matrix_keys[] = { KEY(0, 0, KEY_F8), /* Red/Off/Power */ KEY(0, 1, KEY_LEFT), @@ -244,19 +222,6 @@ static unsigned int treo680_matrix_keys[] = { KEY(7, 5, KEY_I), }; -static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = { - .matrix_key_rows = 8, - .matrix_key_cols = 7, - .matrix_key_map = treo680_matrix_keys, - .matrix_key_map_size = ARRAY_SIZE(treo680_matrix_keys), - .direct_key_map = { KEY_CONNECT }, - .direct_key_num = 1, - - .debounce_interval = 30, -}; -#endif /* CONFIG_MACH_TREO680 */ - -#ifdef CONFIG_MACH_CENTRO static unsigned int centro_matrix_keys[] = { KEY(0, 0, KEY_F9), /* Home */ KEY(0, 1, KEY_LEFT), @@ -316,157 +281,50 @@ static unsigned int centro_matrix_keys[] = { KEY(7, 5, KEY_I), }; -static struct pxa27x_keypad_platform_data centro_keypad_platform_data = { +static struct pxa27x_keypad_platform_data treo680_keypad_pdata = { .matrix_key_rows = 8, .matrix_key_cols = 7, - .matrix_key_map = centro_matrix_keys, - .matrix_key_map_size = ARRAY_SIZE(centro_matrix_keys), + .matrix_key_map = treo680_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(treo680_matrix_keys), .direct_key_map = { KEY_CONNECT }, .direct_key_num = 1, .debounce_interval = 30, }; -#endif /* CONFIG_MACH_CENTRO */ -/****************************************************************************** - * aSoC audio - ******************************************************************************/ - -static pxa2xx_audio_ops_t treo_ac97_pdata = { - .reset_gpio = 95, -}; - -/****************************************************************************** - * Backlight - ******************************************************************************/ -static int treo_backlight_init(struct device *dev) +static void __init palmtreo_kpc_init(void) { - int ret; - - ret = gpio_request(GPIO_NR_TREO_BL_POWER, "BL POWER"); - if (ret) - goto err; - ret = gpio_direction_output(GPIO_NR_TREO_BL_POWER, 0); - if (ret) - goto err2; - - return 0; + static struct pxa27x_keypad_platform_data *data = &treo680_keypad_pdata; -err2: - gpio_free(GPIO_NR_TREO_BL_POWER); -err: - return ret; -} - -static int treo_backlight_notify(struct device *dev, int brightness) -{ - gpio_set_value(GPIO_NR_TREO_BL_POWER, brightness); - return TREO_MAX_INTENSITY - brightness; -}; + if (machine_is_centro()) { + data->matrix_key_map = centro_matrix_keys; + data->matrix_key_map_size = ARRAY_SIZE(centro_matrix_keys); + } -static void treo_backlight_exit(struct device *dev) -{ - gpio_free(GPIO_NR_TREO_BL_POWER); + pxa_set_keypad_info(&treo680_keypad_pdata); } - -static struct platform_pwm_backlight_data treo_backlight_data = { - .pwm_id = 0, - .max_brightness = TREO_MAX_INTENSITY, - .dft_brightness = TREO_DEFAULT_INTENSITY, - .pwm_period_ns = TREO_PERIOD_NS, - .init = treo_backlight_init, - .notify = treo_backlight_notify, - .exit = treo_backlight_exit, -}; - -static struct platform_device treo_backlight = { - .name = "pwm-backlight", - .dev = { - .parent = &pxa27x_device_pwm0.dev, - .platform_data = &treo_backlight_data, - }, -}; - -/****************************************************************************** - * IrDA - ******************************************************************************/ -static struct pxaficp_platform_data treo_ficp_info = { - .gpio_pwdown = GPIO_NR_TREO_IR_EN, - .transceiver_cap = IR_SIRMODE | IR_OFF, -}; - -/****************************************************************************** - * UDC - ******************************************************************************/ -static struct pxa2xx_udc_mach_info treo_udc_info __initdata = { - .gpio_vbus = GPIO_NR_TREO_USB_DETECT, - .gpio_vbus_inverted = 1, - .gpio_pullup = GPIO_NR_TREO_USB_PULLUP, -}; - +#else +static inline void palmtreo_kpc_init(void) {} +#endif /****************************************************************************** * USB host ******************************************************************************/ -#ifdef CONFIG_MACH_TREO680 +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) static struct pxaohci_platform_data treo680_ohci_info = { .port_mode = PMM_PERPORT_MODE, .flags = ENABLE_PORT1 | ENABLE_PORT3, .power_budget = 0, }; -#endif /* CONFIG_MACH_TREO680 */ -/****************************************************************************** - * Power supply - ******************************************************************************/ -static int power_supply_init(struct device *dev) +static void __init palmtreo_uhc_init(void) { - int ret; - - ret = gpio_request(GPIO_NR_TREO_POWER_DETECT, "CABLE_STATE_AC"); - if (ret) - goto err1; - ret = gpio_direction_input(GPIO_NR_TREO_POWER_DETECT); - if (ret) - goto err2; - - return 0; - -err2: - gpio_free(GPIO_NR_TREO_POWER_DETECT); -err1: - return ret; -} - -static int treo_is_ac_online(void) -{ - return gpio_get_value(GPIO_NR_TREO_POWER_DETECT); + if (machine_is_treo680()) + pxa_set_ohci_info(&treo680_ohci_info); } - -static void power_supply_exit(struct device *dev) -{ - gpio_free(GPIO_NR_TREO_POWER_DETECT); -} - -static char *treo_supplicants[] = { - "main-battery", -}; - -static struct pda_power_pdata power_supply_info = { - .init = power_supply_init, - .is_ac_online = treo_is_ac_online, - .exit = power_supply_exit, - .supplied_to = treo_supplicants, - .num_supplicants = ARRAY_SIZE(treo_supplicants), -}; - -static struct platform_device power_supply = { - .name = "pda-power", - .id = -1, - .dev = { - .platform_data = &power_supply_info, - }, -}; +#else +static inline void palmtreo_uhc_init(void) {} +#endif /****************************************************************************** * Vibra and LEDs @@ -495,16 +353,6 @@ static struct gpio_led_platform_data treo680_gpio_led_info = { .num_leds = ARRAY_SIZE(treo680_gpio_leds), }; -static struct platform_device treo680_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &treo680_gpio_led_info, - } -}; -#endif /* CONFIG_MACH_TREO680 */ - -#ifdef CONFIG_MACH_CENTRO static struct gpio_led centro_gpio_leds[] = { { .name = "centro:vibra:vibra", @@ -529,145 +377,67 @@ static struct gpio_led_platform_data centro_gpio_led_info = { .num_leds = ARRAY_SIZE(centro_gpio_leds), }; -static struct platform_device centro_leds = { +static struct platform_device palmtreo_leds = { .name = "leds-gpio", .id = -1, .dev = { - .platform_data = ¢ro_gpio_led_info, + .platform_data = &treo680_gpio_led_info, } }; -#endif /* CONFIG_MACH_CENTRO */ - -/****************************************************************************** - * Framebuffer - ******************************************************************************/ -/* TODO: add support for 324x324 */ -static struct pxafb_mode_info treo_lcd_modes[] = { -{ - .pixclock = 86538, - .xres = 320, - .yres = 320, - .bpp = 16, - - .left_margin = 20, - .right_margin = 8, - .upper_margin = 8, - .lower_margin = 5, - - .hsync_len = 4, - .vsync_len = 1, -}, -}; -static void treo_lcd_power(int on, struct fb_var_screeninfo *info) +static void __init palmtreo_leds_init(void) { - gpio_set_value(GPIO_NR_TREO_BL_POWER, on); -} - -static struct pxafb_mach_info treo_lcd_screen = { - .modes = treo_lcd_modes, - .num_modes = ARRAY_SIZE(treo_lcd_modes), - .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, -}; + if (machine_is_centro()) + palmtreo_leds.dev.platform_data = ¢ro_gpio_led_info; -/****************************************************************************** - * Power management - standby - ******************************************************************************/ -static void __init treo_pm_init(void) -{ - static u32 resume[] = { - 0xe3a00101, /* mov r0, #0x40000000 */ - 0xe380060f, /* orr r0, r0, #0x00f00000 */ - 0xe590f008, /* ldr pc, [r0, #0x08] */ - }; - - /* this is where the bootloader jumps */ - memcpy(phys_to_virt(TREO_STR_BASE), resume, sizeof(resume)); + platform_device_register(&palmtreo_leds); } +#else +static inline void palmtreo_leds_init(void) {} +#endif /****************************************************************************** * Machine init ******************************************************************************/ -static struct platform_device *treo_devices[] __initdata = { - &treo_backlight, - &power_supply, -}; - -#ifdef CONFIG_MACH_TREO680 -static struct platform_device *treo680_devices[] __initdata = { - &treo680_leds, -}; -#endif /* CONFIG_MACH_TREO680 */ - -#ifdef CONFIG_MACH_CENTRO -static struct platform_device *centro_devices[] __initdata = { - ¢ro_leds, -}; -#endif /* CONFIG_MACH_CENTRO */ - -/* setup udc GPIOs initial state */ -static void __init treo_udc_init(void) -{ - if (!gpio_request(GPIO_NR_TREO_USB_PULLUP, "UDC Vbus")) { - gpio_direction_output(GPIO_NR_TREO_USB_PULLUP, 1); - gpio_free(GPIO_NR_TREO_USB_PULLUP); - } -} - -static void __init treo_lcd_power_init(void) -{ - int ret; - - ret = gpio_request(GPIO_NR_TREO_LCD_POWER, "LCD POWER"); - if (ret) { - pr_err("Treo680: LCD power GPIO request failed!\n"); - return; - } - - ret = gpio_direction_output(GPIO_NR_TREO_LCD_POWER, 0); - if (ret) { - pr_err("Treo680: setting LCD power GPIO direction failed!\n"); - gpio_free(GPIO_NR_TREO_LCD_POWER); - return; - } - - treo_lcd_screen.pxafb_lcd_power = treo_lcd_power; -} - static void __init treo_reserve(void) { memblock_reserve(0xa0000000, 0x1000); memblock_reserve(0xa2000000, 0x1000); } -static void __init treo_init(void) +static void __init palmphone_common_init(void) { + pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config)); pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - - treo_pm_init(); - pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config)); - treo_lcd_power_init(); - set_pxa_fb_info(&treo_lcd_screen); - treo_udc_init(); - pxa_set_udc_info(&treo_udc_info); - pxa_set_ac97_info(&treo_ac97_pdata); - pxa_set_ficp_info(&treo_ficp_info); - - platform_add_devices(ARRAY_AND_SIZE(treo_devices)); + palm27x_pm_init(TREO_STR_BASE); + palm27x_lcd_init(GPIO_NR_TREO_BL_POWER, &palm_320x320_new_lcd_mode); + palm27x_udc_init(GPIO_NR_TREO_USB_DETECT, GPIO_NR_TREO_USB_PULLUP, 1); + palm27x_irda_init(GPIO_NR_TREO_IR_EN); + palm27x_ac97_init(-1, -1, -1, 95); + palm27x_pwm_init(GPIO_NR_TREO_BL_POWER, -1); + palm27x_power_init(GPIO_NR_TREO_POWER_DETECT, -1); + palm27x_pmic_init(); + palmtreo_kpc_init(); + palmtreo_uhc_init(); + palmtreo_leds_init(); } -#ifdef CONFIG_MACH_TREO680 static void __init treo680_init(void) { - treo_init(); pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config)); - pxa_set_mci_info(&treo680_mci_platform_data); - pxa_set_keypad_info(&treo680_keypad_platform_data); - pxa_set_ohci_info(&treo680_ohci_info); + palmphone_common_init(); + palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY, + GPIO_NR_TREO680_SD_POWER, 0); +} - platform_add_devices(ARRAY_AND_SIZE(treo680_devices)); +static void __init centro_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config)); + palmphone_common_init(); + palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, -1, + GPIO_NR_CENTRO_SD_POWER, 1); } MACHINE_START(TREO680, "Palm Treo 680") @@ -680,19 +450,6 @@ MACHINE_START(TREO680, "Palm Treo 680") .timer = &pxa_timer, .init_machine = treo680_init, MACHINE_END -#endif /* CONFIG_MACH_TREO680 */ - -#ifdef CONFIG_MACH_CENTRO -static void __init centro_init(void) -{ - treo_init(); - pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config)); - pxa_set_mci_info(¢ro_mci_platform_data); - - pxa_set_keypad_info(¢ro_keypad_platform_data); - - platform_add_devices(ARRAY_AND_SIZE(centro_devices)); -} MACHINE_START(CENTRO, "Palm Centro 685") .phys_io = TREO_PHYS_IO_START, @@ -702,6 +459,5 @@ MACHINE_START(CENTRO, "Palm Centro 685") .reserve = treo_reserve, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, - .init_machine = centro_init, + .init_machine = centro_init, MACHINE_END -#endif /* CONFIG_MACH_CENTRO */ diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index ecc1a401598e..144dc2b6911f 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -25,7 +25,7 @@ #include <linux/pda_power.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> -#include <linux/wm97xx_batt.h> +#include <linux/wm97xx.h> #include <linux/power_supply.h> #include <linux/usb/gpio_vbus.h> #include <linux/mtd/nand.h> @@ -46,6 +46,7 @@ #include <mach/pxa27x_keypad.h> #include <mach/udc.h> #include <mach/palmasoc.h> +#include <mach/palm27x.h> #include "generic.h" #include "devices.h" @@ -129,6 +130,7 @@ static unsigned long palmtx_pin_config[] __initdata = { /****************************************************************************** * NOR Flash ******************************************************************************/ +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition palmtx_partitions[] = { { .name = "Flash", @@ -162,20 +164,18 @@ static struct platform_device palmtx_flash = { }, }; -/****************************************************************************** - * SD/MMC card controller - ******************************************************************************/ -static struct pxamci_platform_data palmtx_mci_platform_data = { - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .gpio_card_detect = GPIO_NR_PALMTX_SD_DETECT_N, - .gpio_card_ro = GPIO_NR_PALMTX_SD_READONLY, - .gpio_power = GPIO_NR_PALMTX_SD_POWER, - .detect_delay_ms = 200, -}; +static void __init palmtx_nor_init(void) +{ + platform_device_register(&palmtx_flash); +} +#else +static inline void palmtx_nor_init(void) {} +#endif /****************************************************************************** * GPIO keyboard ******************************************************************************/ +#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) static unsigned int palmtx_matrix_keys[] = { KEY(0, 0, KEY_POWER), KEY(0, 1, KEY_F1), @@ -201,9 +201,18 @@ static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = { .debounce_interval = 30, }; +static void __init palmtx_kpc_init(void) +{ + pxa_set_keypad_info(&palmtx_keypad_platform_data); +} +#else +static inline void palmtx_kpc_init(void) {} +#endif + /****************************************************************************** * GPIO keys ******************************************************************************/ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) static struct gpio_keys_button palmtx_pxa_buttons[] = { {KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" }, }; @@ -221,208 +230,18 @@ static struct platform_device palmtx_pxa_keys = { }, }; -/****************************************************************************** - * Backlight - ******************************************************************************/ -static int palmtx_backlight_init(struct device *dev) -{ - int ret; - - ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER"); - if (ret) - goto err; - ret = gpio_direction_output(GPIO_NR_PALMTX_BL_POWER, 0); - if (ret) - goto err2; - ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER"); - if (ret) - goto err2; - ret = gpio_direction_output(GPIO_NR_PALMTX_LCD_POWER, 0); - if (ret) - goto err3; - - return 0; -err3: - gpio_free(GPIO_NR_PALMTX_LCD_POWER); -err2: - gpio_free(GPIO_NR_PALMTX_BL_POWER); -err: - return ret; -} - -static int palmtx_backlight_notify(struct device *dev, int brightness) -{ - gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness); - gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness); - return brightness; -} - -static void palmtx_backlight_exit(struct device *dev) -{ - gpio_free(GPIO_NR_PALMTX_BL_POWER); - gpio_free(GPIO_NR_PALMTX_LCD_POWER); -} - -static struct platform_pwm_backlight_data palmtx_backlight_data = { - .pwm_id = 0, - .max_brightness = PALMTX_MAX_INTENSITY, - .dft_brightness = PALMTX_MAX_INTENSITY, - .pwm_period_ns = PALMTX_PERIOD_NS, - .init = palmtx_backlight_init, - .notify = palmtx_backlight_notify, - .exit = palmtx_backlight_exit, -}; - -static struct platform_device palmtx_backlight = { - .name = "pwm-backlight", - .dev = { - .parent = &pxa27x_device_pwm0.dev, - .platform_data = &palmtx_backlight_data, - }, -}; - -/****************************************************************************** - * IrDA - ******************************************************************************/ -static struct pxaficp_platform_data palmtx_ficp_platform_data = { - .gpio_pwdown = GPIO_NR_PALMTX_IR_DISABLE, - .transceiver_cap = IR_SIRMODE | IR_OFF, -}; - -/****************************************************************************** - * UDC - ******************************************************************************/ -static struct gpio_vbus_mach_info palmtx_udc_info = { - .gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N, - .gpio_vbus_inverted = 1, - .gpio_pullup = GPIO_NR_PALMTX_USB_PULLUP, -}; - -static struct platform_device palmtx_gpio_vbus = { - .name = "gpio-vbus", - .id = -1, - .dev = { - .platform_data = &palmtx_udc_info, - }, -}; - -/****************************************************************************** - * Power supply - ******************************************************************************/ -static int power_supply_init(struct device *dev) -{ - int ret; - - ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC"); - if (ret) - goto err1; - ret = gpio_direction_input(GPIO_NR_PALMTX_POWER_DETECT); - if (ret) - goto err2; - - return 0; - -err2: - gpio_free(GPIO_NR_PALMTX_POWER_DETECT); -err1: - return ret; -} - -static int palmtx_is_ac_online(void) -{ - return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT); -} - -static void power_supply_exit(struct device *dev) +static void __init palmtx_keys_init(void) { - gpio_free(GPIO_NR_PALMTX_POWER_DETECT); + platform_device_register(&palmtx_pxa_keys); } - -static char *palmtx_supplicants[] = { - "main-battery", -}; - -static struct pda_power_pdata power_supply_info = { - .init = power_supply_init, - .is_ac_online = palmtx_is_ac_online, - .exit = power_supply_exit, - .supplied_to = palmtx_supplicants, - .num_supplicants = ARRAY_SIZE(palmtx_supplicants), -}; - -static struct platform_device power_supply = { - .name = "pda-power", - .id = -1, - .dev = { - .platform_data = &power_supply_info, - }, -}; - -/****************************************************************************** - * WM97xx battery - ******************************************************************************/ -static struct wm97xx_batt_info wm97xx_batt_pdata = { - .batt_aux = WM97XX_AUX_ID3, - .temp_aux = WM97XX_AUX_ID2, - .charge_gpio = -1, - .max_voltage = PALMTX_BAT_MAX_VOLTAGE, - .min_voltage = PALMTX_BAT_MIN_VOLTAGE, - .batt_mult = 1000, - .batt_div = 414, - .temp_mult = 1, - .temp_div = 1, - .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO, - .batt_name = "main-batt", -}; - -/****************************************************************************** - * aSoC audio - ******************************************************************************/ -static struct palm27x_asoc_info palmtx_asoc_pdata = { - .jack_gpio = GPIO_NR_PALMTX_EARPHONE_DETECT, -}; - -static pxa2xx_audio_ops_t palmtx_ac97_pdata = { - .reset_gpio = 95, -}; - -static struct platform_device palmtx_asoc = { - .name = "palm27x-asoc", - .id = -1, - .dev = { - .platform_data = &palmtx_asoc_pdata, - }, -}; - -/****************************************************************************** - * Framebuffer - ******************************************************************************/ -static struct pxafb_mode_info palmtx_lcd_modes[] = { -{ - .pixclock = 57692, - .xres = 320, - .yres = 480, - .bpp = 16, - - .left_margin = 32, - .right_margin = 1, - .upper_margin = 7, - .lower_margin = 1, - - .hsync_len = 4, - .vsync_len = 1, -}, -}; - -static struct pxafb_mach_info palmtx_lcd_screen = { - .modes = palmtx_lcd_modes, - .num_modes = ARRAY_SIZE(palmtx_lcd_modes), - .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, -}; +#else +static inline void palmtx_keys_init(void) {} +#endif /****************************************************************************** * NAND Flash ******************************************************************************/ +#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE) static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { @@ -482,36 +301,17 @@ static struct platform_device palmtx_nand = { } }; -/****************************************************************************** - * Power management - standby - ******************************************************************************/ -static void __init palmtx_pm_init(void) +static void __init palmtx_nand_init(void) { - static u32 resume[] = { - 0xe3a00101, /* mov r0, #0x40000000 */ - 0xe380060f, /* orr r0, r0, #0x00f00000 */ - 0xe590f008, /* ldr pc, [r0, #0x08] */ - }; - - /* copy the bootloader */ - memcpy(phys_to_virt(PALMTX_STR_BASE), resume, sizeof(resume)); + platform_device_register(&palmtx_nand); } +#else +static inline void palmtx_nand_init(void) {} +#endif /****************************************************************************** * Machine init ******************************************************************************/ -static struct platform_device *devices[] __initdata = { -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) - &palmtx_pxa_keys, -#endif - &palmtx_backlight, - &power_supply, - &palmtx_asoc, - &palmtx_gpio_vbus, - &palmtx_flash, - &palmtx_nand, -}; - static struct map_desc palmtx_io_desc[] __initdata = { { .virtual = PALMTX_PCMCIA_VIRT, @@ -537,34 +337,29 @@ static void __init palmtx_map_io(void) iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc)); } -/* setup udc GPIOs initial state */ -static void __init palmtx_udc_init(void) -{ - if (!gpio_request(GPIO_NR_PALMTX_USB_PULLUP, "UDC Vbus")) { - gpio_direction_output(GPIO_NR_PALMTX_USB_PULLUP, 1); - gpio_free(GPIO_NR_PALMTX_USB_PULLUP); - } -} - - static void __init palmtx_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config)); - pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - palmtx_pm_init(); - set_pxa_fb_info(&palmtx_lcd_screen); - pxa_set_mci_info(&palmtx_mci_platform_data); - palmtx_udc_init(); - pxa_set_ac97_info(&palmtx_ac97_pdata); - pxa_set_ficp_info(&palmtx_ficp_platform_data); - pxa_set_keypad_info(&palmtx_keypad_platform_data); - wm97xx_bat_set_pdata(&wm97xx_batt_pdata); - - platform_add_devices(devices, ARRAY_SIZE(devices)); + palm27x_mmc_init(GPIO_NR_PALMTX_SD_DETECT_N, GPIO_NR_PALMTX_SD_READONLY, + GPIO_NR_PALMTX_SD_POWER, 0); + palm27x_pm_init(PALMTX_STR_BASE); + palm27x_lcd_init(-1, &palm_320x480_lcd_mode); + palm27x_udc_init(GPIO_NR_PALMTX_USB_DETECT_N, + GPIO_NR_PALMTX_USB_PULLUP, 1); + palm27x_irda_init(GPIO_NR_PALMTX_IR_DISABLE); + palm27x_ac97_init(PALMTX_BAT_MIN_VOLTAGE, PALMTX_BAT_MAX_VOLTAGE, + GPIO_NR_PALMTX_EARPHONE_DETECT, 95); + palm27x_pwm_init(GPIO_NR_PALMTX_BL_POWER, GPIO_NR_PALMTX_LCD_POWER); + palm27x_power_init(GPIO_NR_PALMTX_POWER_DETECT, -1); + palm27x_pmic_init(); + palmtx_kpc_init(); + palmtx_keys_init(); + palmtx_nor_init(); + palmtx_nand_init(); } MACHINE_START(PALMTX, "Palm T|X") diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 3a7925ca3944..87e4b1044e0b 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -27,7 +27,7 @@ #include <linux/pda_power.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> -#include <linux/wm97xx_batt.h> +#include <linux/wm97xx.h> #include <linux/power_supply.h> #include <linux/usb/gpio_vbus.h> @@ -44,6 +44,7 @@ #include <mach/pxa27x_keypad.h> #include <mach/udc.h> #include <mach/palmasoc.h> +#include <mach/palm27x.h> #include <mach/pm.h> @@ -109,21 +110,9 @@ static unsigned long palmz72_pin_config[] __initdata = { }; /****************************************************************************** - * SD/MMC card controller - ******************************************************************************/ -/* SD_POWER is not actually power, but it is more like chip - * select, i.e. it is inverted */ -static struct pxamci_platform_data palmz72_mci_platform_data = { - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .gpio_card_detect = GPIO_NR_PALMZ72_SD_DETECT_N, - .gpio_card_ro = GPIO_NR_PALMZ72_SD_RO, - .gpio_power = GPIO_NR_PALMZ72_SD_POWER_N, - .gpio_power_invert = 1, -}; - -/****************************************************************************** * GPIO keyboard ******************************************************************************/ +#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) static unsigned int palmz72_matrix_keys[] = { KEY(0, 0, KEY_POWER), KEY(0, 1, KEY_F1), @@ -149,77 +138,18 @@ static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = { .debounce_interval = 30, }; -/****************************************************************************** - * Backlight - ******************************************************************************/ -static int palmz72_backlight_init(struct device *dev) +static void __init palmz72_kpc_init(void) { - int ret; - - ret = gpio_request(GPIO_NR_PALMZ72_BL_POWER, "BL POWER"); - if (ret) - goto err; - ret = gpio_direction_output(GPIO_NR_PALMZ72_BL_POWER, 0); - if (ret) - goto err2; - ret = gpio_request(GPIO_NR_PALMZ72_LCD_POWER, "LCD POWER"); - if (ret) - goto err2; - ret = gpio_direction_output(GPIO_NR_PALMZ72_LCD_POWER, 0); - if (ret) - goto err3; - - return 0; -err3: - gpio_free(GPIO_NR_PALMZ72_LCD_POWER); -err2: - gpio_free(GPIO_NR_PALMZ72_BL_POWER); -err: - return ret; -} - -static int palmz72_backlight_notify(struct device *dev, int brightness) -{ - gpio_set_value(GPIO_NR_PALMZ72_BL_POWER, brightness); - gpio_set_value(GPIO_NR_PALMZ72_LCD_POWER, brightness); - return brightness; -} - -static void palmz72_backlight_exit(struct device *dev) -{ - gpio_free(GPIO_NR_PALMZ72_BL_POWER); - gpio_free(GPIO_NR_PALMZ72_LCD_POWER); + pxa_set_keypad_info(&palmz72_keypad_platform_data); } - -static struct platform_pwm_backlight_data palmz72_backlight_data = { - .pwm_id = 0, - .max_brightness = PALMZ72_MAX_INTENSITY, - .dft_brightness = PALMZ72_MAX_INTENSITY, - .pwm_period_ns = PALMZ72_PERIOD_NS, - .init = palmz72_backlight_init, - .notify = palmz72_backlight_notify, - .exit = palmz72_backlight_exit, -}; - -static struct platform_device palmz72_backlight = { - .name = "pwm-backlight", - .dev = { - .parent = &pxa27x_device_pwm0.dev, - .platform_data = &palmz72_backlight_data, - }, -}; - -/****************************************************************************** - * IrDA - ******************************************************************************/ -static struct pxaficp_platform_data palmz72_ficp_platform_data = { - .gpio_pwdown = GPIO_NR_PALMZ72_IR_DISABLE, - .transceiver_cap = IR_SIRMODE | IR_OFF, -}; +#else +static inline void palmz72_kpc_init(void) {} +#endif /****************************************************************************** * LEDs ******************************************************************************/ +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) static struct gpio_led gpio_leds[] = { { .name = "palmz72:green:led", @@ -241,139 +171,13 @@ static struct platform_device palmz72_leds = { } }; -/****************************************************************************** - * UDC - ******************************************************************************/ -static struct gpio_vbus_mach_info palmz72_udc_info = { - .gpio_vbus = GPIO_NR_PALMZ72_USB_DETECT_N, - .gpio_pullup = GPIO_NR_PALMZ72_USB_PULLUP, -}; - -static struct platform_device palmz72_gpio_vbus = { - .name = "gpio-vbus", - .id = -1, - .dev = { - .platform_data = &palmz72_udc_info, - }, -}; - -/****************************************************************************** - * Power supply - ******************************************************************************/ -static int power_supply_init(struct device *dev) -{ - int ret; - - ret = gpio_request(GPIO_NR_PALMZ72_POWER_DETECT, "CABLE_STATE_AC"); - if (ret) - goto err1; - ret = gpio_direction_input(GPIO_NR_PALMZ72_POWER_DETECT); - if (ret) - goto err2; - - ret = gpio_request(GPIO_NR_PALMZ72_USB_DETECT_N, "CABLE_STATE_USB"); - if (ret) - goto err2; - ret = gpio_direction_input(GPIO_NR_PALMZ72_USB_DETECT_N); - if (ret) - goto err3; - - return 0; -err3: - gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N); -err2: - gpio_free(GPIO_NR_PALMZ72_POWER_DETECT); -err1: - return ret; -} - -static int palmz72_is_ac_online(void) -{ - return gpio_get_value(GPIO_NR_PALMZ72_POWER_DETECT); -} - -static int palmz72_is_usb_online(void) +static void __init palmz72_leds_init(void) { - return !gpio_get_value(GPIO_NR_PALMZ72_USB_DETECT_N); + platform_device_register(&palmz72_leds); } - -static void power_supply_exit(struct device *dev) -{ - gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N); - gpio_free(GPIO_NR_PALMZ72_POWER_DETECT); -} - -static char *palmz72_supplicants[] = { - "main-battery", -}; - -static struct pda_power_pdata power_supply_info = { - .init = power_supply_init, - .is_ac_online = palmz72_is_ac_online, - .is_usb_online = palmz72_is_usb_online, - .exit = power_supply_exit, - .supplied_to = palmz72_supplicants, - .num_supplicants = ARRAY_SIZE(palmz72_supplicants), -}; - -static struct platform_device power_supply = { - .name = "pda-power", - .id = -1, - .dev = { - .platform_data = &power_supply_info, - }, -}; - -/****************************************************************************** - * WM97xx battery - ******************************************************************************/ -static struct wm97xx_batt_info wm97xx_batt_pdata = { - .batt_aux = WM97XX_AUX_ID3, - .temp_aux = WM97XX_AUX_ID2, - .charge_gpio = -1, - .max_voltage = PALMZ72_BAT_MAX_VOLTAGE, - .min_voltage = PALMZ72_BAT_MIN_VOLTAGE, - .batt_mult = 1000, - .batt_div = 414, - .temp_mult = 1, - .temp_div = 1, - .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO, - .batt_name = "main-batt", -}; - -/****************************************************************************** - * aSoC audio - ******************************************************************************/ -static struct platform_device palmz72_asoc = { - .name = "palm27x-asoc", - .id = -1, -}; - -/****************************************************************************** - * Framebuffer - ******************************************************************************/ -static struct pxafb_mode_info palmz72_lcd_modes[] = { -{ - .pixclock = 115384, - .xres = 320, - .yres = 320, - .bpp = 16, - - .left_margin = 27, - .right_margin = 7, - .upper_margin = 7, - .lower_margin = 8, - - .hsync_len = 6, - .vsync_len = 1, -}, -}; - -static struct pxafb_mach_info palmz72_lcd_screen = { - .modes = palmz72_lcd_modes, - .num_modes = ARRAY_SIZE(palmz72_lcd_modes), - .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, -}; +#else +static inline void palmz72_leds_init(void) {} +#endif #ifdef CONFIG_PM @@ -452,40 +256,26 @@ device_initcall(palmz72_pm_init); /****************************************************************************** * Machine init ******************************************************************************/ -static struct platform_device *devices[] __initdata = { - &palmz72_backlight, - &palmz72_leds, - &palmz72_asoc, - &power_supply, - &palmz72_gpio_vbus, -}; - -/* setup udc GPIOs initial state */ -static void __init palmz72_udc_init(void) -{ - if (!gpio_request(GPIO_NR_PALMZ72_USB_PULLUP, "USB Pullup")) { - gpio_direction_output(GPIO_NR_PALMZ72_USB_PULLUP, 0); - gpio_free(GPIO_NR_PALMZ72_USB_PULLUP); - } -} - static void __init palmz72_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config)); - pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - set_pxa_fb_info(&palmz72_lcd_screen); - pxa_set_mci_info(&palmz72_mci_platform_data); - palmz72_udc_init(); - pxa_set_ac97_info(NULL); - pxa_set_ficp_info(&palmz72_ficp_platform_data); - pxa_set_keypad_info(&palmz72_keypad_platform_data); - wm97xx_bat_set_pdata(&wm97xx_batt_pdata); - - platform_add_devices(devices, ARRAY_SIZE(devices)); + palm27x_mmc_init(GPIO_NR_PALMZ72_SD_DETECT_N, GPIO_NR_PALMZ72_SD_RO, + GPIO_NR_PALMZ72_SD_POWER_N, 1); + palm27x_lcd_init(-1, &palm_320x320_lcd_mode); + palm27x_udc_init(GPIO_NR_PALMZ72_USB_DETECT_N, + GPIO_NR_PALMZ72_USB_PULLUP, 0); + palm27x_irda_init(GPIO_NR_PALMZ72_IR_DISABLE); + palm27x_ac97_init(PALMZ72_BAT_MIN_VOLTAGE, PALMZ72_BAT_MAX_VOLTAGE, + -1, 113); + palm27x_pwm_init(-1, -1); + palm27x_power_init(-1, -1); + palm27x_pmic_init(); + palmz72_kpc_init(); + palmz72_leds_init(); } MACHINE_START(PALMZ72, "Palm Zire72") diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index bc2758b54446..55e8fcde0141 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -43,7 +43,6 @@ #include <mach/irda.h> #include <mach/poodle.h> #include <mach/pxafb.h> -#include <mach/sharpsl.h> #include <mach/pxa2xx_spi.h> #include <plat/i2c.h> @@ -53,7 +52,6 @@ #include "generic.h" #include "devices.h" -#include "sharpsl.h" static unsigned long poodle_pin_config[] __initdata = { /* I/O */ diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 0b9ad30bfd51..de53f2e4aa39 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -322,6 +322,7 @@ void __init pxa26x_init_irq(void) static struct platform_device *pxa25x_devices[] __initdata = { &pxa25x_device_udc, + &pxa_device_pmu, &pxa_device_i2s, &sa1100_device_rtc, &pxa25x_device_ssp, diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index c059dac02b61..12e5b9f01e6f 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -383,6 +383,7 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info) static struct platform_device *devices[] __initdata = { &pxa27x_device_udc, + &pxa_device_pmu, &pxa_device_i2s, &sa1100_device_rtc, &pxa_device_rtc, diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index f544e58e1536..fa0014847c71 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -52,7 +52,7 @@ static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, }; /* crystal frequency to HSIO bus frequency multiplier (HSS) */ -static unsigned char hss_mult[4] = { 8, 12, 16, 0 }; +static unsigned char hss_mult[4] = { 8, 12, 16, 24 }; /* * Get the clock frequency as reflected by CCSR and the turbo flag. @@ -552,11 +552,23 @@ static void pxa_unmask_ext_wakeup(unsigned int irq) PECR |= PECR_IE(irq - IRQ_WAKEUP0); } +static int pxa_set_ext_wakeup_type(unsigned int irq, unsigned int flow_type) +{ + if (flow_type & IRQ_TYPE_EDGE_RISING) + PWER |= 1 << (irq - IRQ_WAKEUP0); + + if (flow_type & IRQ_TYPE_EDGE_FALLING) + PWER |= 1 << (irq - IRQ_WAKEUP0 + 2); + + return 0; +} + static struct irq_chip pxa_ext_wakeup_chip = { .name = "WAKEUP", .ack = pxa_ack_ext_wakeup, .mask = pxa_mask_ext_wakeup, .unmask = pxa_unmask_ext_wakeup, + .set_type = pxa_set_ext_wakeup_type, }; static void __init pxa_init_ext_wakeup_irq(set_wake_t fn) @@ -596,6 +608,7 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info) static struct platform_device *devices[] __initdata = { &pxa27x_device_udc, + &pxa_device_pmu, &pxa_device_i2s, &sa1100_device_rtc, &pxa_device_rtc, diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index d4b61b3f08f3..67e04f4e07c1 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -745,13 +745,32 @@ static int raumfeld_is_usb_online(void) static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" }; +static void raumfeld_power_signal_charged(void) +{ + struct power_supply *psy = + power_supply_get_by_name(raumfeld_power_supplicants[0]); + + if (psy) + power_supply_set_battery_charged(psy); +} + +static int raumfeld_power_resume(void) +{ + /* check if GPIO_CHARGE_DONE went low while we were sleeping */ + if (!gpio_get_value(GPIO_CHARGE_DONE)) + raumfeld_power_signal_charged(); + + return 0; +} + static struct pda_power_pdata power_supply_info = { .init = power_supply_init, .is_ac_online = raumfeld_is_ac_online, .is_usb_online = raumfeld_is_usb_online, .exit = power_supply_exit, .supplied_to = raumfeld_power_supplicants, - .num_supplicants = ARRAY_SIZE(raumfeld_power_supplicants) + .num_supplicants = ARRAY_SIZE(raumfeld_power_supplicants), + .resume = raumfeld_power_resume, }; static struct resource power_supply_resources[] = { @@ -766,13 +785,7 @@ static struct resource power_supply_resources[] = { static irqreturn_t charge_done_irq(int irq, void *dev_id) { - struct power_supply *psy; - - psy = power_supply_get_by_name("ds2760-battery.0"); - - if (psy) - power_supply_set_battery_charged(psy); - + raumfeld_power_signal_charged(); return IRQ_HANDLED; } diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h deleted file mode 100644 index 0cc1203c5bef..000000000000 --- a/arch/arm/mach-pxa/sharpsl.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (c) 2004-2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <mach/sharpsl_pm.h> - -/* - * SharpSL Battery/PM Driver - */ -#define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x)) - -/* MAX1111 Channel Definitions */ -#define MAX1111_BATT_VOLT 4u -#define MAX1111_BATT_TEMP 2u -#define MAX1111_ACIN_VOLT 6u - -extern struct battery_thresh sharpsl_battery_levels_acin[]; -extern struct battery_thresh sharpsl_battery_levels_noac[]; -int sharpsl_pm_pxa_read_max1111(int channel); - - diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index cb4767251f3c..8fed027b12dc 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -29,11 +29,8 @@ #include <mach/pm.h> #include <mach/pxa2xx-regs.h> #include <mach/regs-rtc.h> -#include <mach/sharpsl.h> #include <mach/sharpsl_pm.h> -#include "sharpsl.h" - /* * Constants */ @@ -180,17 +177,12 @@ int sharpsl_pm_pxa_read_max1111(int channel) if (machine_is_tosa()) return 0; -#ifdef CONFIG_CORGI_SSP_DEPRECATED - return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1 - | MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR); -#else extern int max1111_read_channel(int); /* max1111 accepts channels from 0-3, however, * it is encoded from 0-7 here in the code. */ return max1111_read_channel(channel >> 1); -#endif } static int get_percentage(int voltage) @@ -277,21 +269,6 @@ static void sharpsl_battery_thread(struct work_struct *private_) dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage, sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies); -#ifdef CONFIG_BACKLIGHT_CORGI - /* If battery is low. limit backlight intensity to save power. */ - if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) - && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) - || (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) { - if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) { - sharpsl_pm.machinfo->backlight_limit(1); - sharpsl_pm.flags |= SHARPSL_BL_LIMIT; - } - } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) { - sharpsl_pm.machinfo->backlight_limit(0); - sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT; - } -#endif - /* Suspend if critical battery level */ if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL) diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index 2ed95f369cfc..52c30b01a671 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -339,10 +339,6 @@ ENTRY(pxa_cpu_resume) mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs mcr p15, 0, r1, c7, c7, 0 @ invalidate I & D caches, BTB -#ifdef CONFIG_XSCALE_CACHE_ERRATA - bic r9, r9, #0x0004 @ see cpu_xscale_proc_init -#endif - mcr p14, 0, r3, c6, c0, 0 @ clock configuration, turbo mode. mcr p15, 0, r4, c15, c1, 0 @ CP access reg mcr p15, 0, r5, c13, c0, 0 @ PID @@ -368,9 +364,6 @@ sleep_save_sp: .text resume_after_mmu: -#ifdef CONFIG_XSCALE_CACHE_ERRATA - bl cpu_xscale_proc_init -#endif ldmfd sp!, {r2, r3} #ifndef CONFIG_IWMMXT mar acc0, r2, r3 diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 51756c723557..1cd99cb87bb1 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -18,14 +18,15 @@ #include <linux/gpio_keys.h> #include <linux/gpio.h> #include <linux/leds.h> -#include <linux/mtd/physmap.h> #include <linux/i2c.h> #include <linux/i2c/pca953x.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/spi/corgi_lcd.h> +#include <linux/mtd/physmap.h> #include <linux/mtd/sharpsl.h> #include <linux/input/matrix_keypad.h> +#include <linux/regulator/machine.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -33,22 +34,25 @@ #include <asm/mach/sharpsl_param.h> #include <asm/hardware/scoop.h> - #include <mach/pxa27x.h> #include <mach/pxa27x-udc.h> #include <mach/reset.h> -#include <plat/i2c.h> #include <mach/irda.h> #include <mach/mmc.h> #include <mach/ohci.h> #include <mach/pxafb.h> #include <mach/pxa2xx_spi.h> #include <mach/spitz.h> +#include <mach/sharpsl_pm.h> + +#include <plat/i2c.h> #include "generic.h" #include "devices.h" -#include "sharpsl.h" +/****************************************************************************** + * Pin configuration + ******************************************************************************/ static unsigned long spitz_pin_config[] __initdata = { /* Chip Selects */ GPIO78_nCS_2, /* SCOOP #2 */ @@ -124,10 +128,13 @@ static unsigned long spitz_pin_config[] __initdata = { GPIO1_GPIO | WAKEUP_ON_EDGE_FALL, /* SPITZ_GPIO_RESET */ }; -/* - * Spitz SCOOP Device #1 - */ -static struct resource spitz_scoop_resources[] = { + +/****************************************************************************** + * Scoop GPIO expander + ******************************************************************************/ +#if defined(CONFIG_SHARP_SCOOP) || defined(CONFIG_SHARP_SCOOP_MODULE) +/* SCOOP Device #1 */ +static struct resource spitz_scoop_1_resources[] = { [0] = { .start = 0x10800000, .end = 0x10800fff, @@ -135,7 +142,7 @@ static struct resource spitz_scoop_resources[] = { }, }; -static struct scoop_config spitz_scoop_setup = { +static struct scoop_config spitz_scoop_1_setup = { .io_dir = SPITZ_SCP_IO_DIR, .io_out = SPITZ_SCP_IO_OUT, .suspend_clr = SPITZ_SCP_SUS_CLR, @@ -143,20 +150,18 @@ static struct scoop_config spitz_scoop_setup = { .gpio_base = SPITZ_SCP_GPIO_BASE, }; -struct platform_device spitzscoop_device = { +struct platform_device spitz_scoop_1_device = { .name = "sharp-scoop", .id = 0, .dev = { - .platform_data = &spitz_scoop_setup, + .platform_data = &spitz_scoop_1_setup, }, - .num_resources = ARRAY_SIZE(spitz_scoop_resources), - .resource = spitz_scoop_resources, + .num_resources = ARRAY_SIZE(spitz_scoop_1_resources), + .resource = spitz_scoop_1_resources, }; -/* - * Spitz SCOOP Device #2 - */ -static struct resource spitz_scoop2_resources[] = { +/* SCOOP Device #2 */ +static struct resource spitz_scoop_2_resources[] = { [0] = { .start = 0x08800040, .end = 0x08800fff, @@ -164,7 +169,7 @@ static struct resource spitz_scoop2_resources[] = { }, }; -static struct scoop_config spitz_scoop2_setup = { +static struct scoop_config spitz_scoop_2_setup = { .io_dir = SPITZ_SCP2_IO_DIR, .io_out = SPITZ_SCP2_IO_OUT, .suspend_clr = SPITZ_SCP2_SUS_CLR, @@ -172,82 +177,110 @@ static struct scoop_config spitz_scoop2_setup = { .gpio_base = SPITZ_SCP2_GPIO_BASE, }; -struct platform_device spitzscoop2_device = { +struct platform_device spitz_scoop_2_device = { .name = "sharp-scoop", .id = 1, .dev = { - .platform_data = &spitz_scoop2_setup, + .platform_data = &spitz_scoop_2_setup, }, - .num_resources = ARRAY_SIZE(spitz_scoop2_resources), - .resource = spitz_scoop2_resources, + .num_resources = ARRAY_SIZE(spitz_scoop_2_resources), + .resource = spitz_scoop_2_resources, }; -#define SPITZ_PWR_SD 0x01 -#define SPITZ_PWR_CF 0x02 +static void __init spitz_scoop_init(void) +{ + platform_device_register(&spitz_scoop_1_device); + + /* Akita doesn't have the second SCOOP chip */ + if (!machine_is_akita()) + platform_device_register(&spitz_scoop_2_device); +} /* Power control is shared with between one of the CF slots and SD */ -static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr) +static void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr) { - unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR); + unsigned short cpr; + unsigned long flags; - if (new_cpr & 0x0007) { + if (new_cpr & 0x7) { gpio_set_value(SPITZ_GPIO_CF_POWER, 1); - if (!(cpr & 0x0002) && !(cpr & 0x0004)) - mdelay(5); - if (device == SPITZ_PWR_CF) - cpr |= 0x0002; - if (device == SPITZ_PWR_SD) - cpr |= 0x0004; - write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); - } else { - if (device == SPITZ_PWR_CF) - cpr &= ~0x0002; - if (device == SPITZ_PWR_SD) - cpr &= ~0x0004; - if (!(cpr & 0x0002) && !(cpr & 0x0004)) { - write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000); - mdelay(1); - gpio_set_value(SPITZ_GPIO_CF_POWER, 0); - } else { - write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); - } + mdelay(5); + } + + local_irq_save(flags); + + cpr = read_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR); + + if (enable & new_cpr) + cpr |= new_cpr; + else + cpr &= ~enable; + + write_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR, cpr); + + local_irq_restore(flags); + + if (!(cpr & 0x7)) { + mdelay(1); + gpio_set_value(SPITZ_GPIO_CF_POWER, 0); } } -static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr) +#else +static inline void spitz_scoop_init(void) {} +static inline void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr) {} +#endif + +/****************************************************************************** + * PCMCIA + ******************************************************************************/ +#if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE) +static void spitz_pcmcia_pwr(struct device *scoop, uint16_t cpr, int nr) { /* Only need to override behaviour for slot 0 */ if (nr == 0) - spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr); + spitz_card_pwr_ctrl( + cpr & (SCOOP_CPR_CF_3V | SCOOP_CPR_CF_XV), cpr); else write_scoop_reg(scoop, SCOOP_CPR, cpr); } static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = { -{ - .dev = &spitzscoop_device.dev, - .irq = SPITZ_IRQ_GPIO_CF_IRQ, - .cd_irq = SPITZ_IRQ_GPIO_CF_CD, - .cd_irq_str = "PCMCIA0 CD", -},{ - .dev = &spitzscoop2_device.dev, - .irq = SPITZ_IRQ_GPIO_CF2_IRQ, - .cd_irq = -1, -}, + { + .dev = &spitz_scoop_1_device.dev, + .irq = SPITZ_IRQ_GPIO_CF_IRQ, + .cd_irq = SPITZ_IRQ_GPIO_CF_CD, + .cd_irq_str = "PCMCIA0 CD", + }, { + .dev = &spitz_scoop_2_device.dev, + .irq = SPITZ_IRQ_GPIO_CF2_IRQ, + .cd_irq = -1, + }, }; static struct scoop_pcmcia_config spitz_pcmcia_config = { - .devs = &spitz_pcmcia_scoop[0], - .num_devs = 2, - .power_ctrl = spitz_pcmcia_pwr, + .devs = &spitz_pcmcia_scoop[0], + .num_devs = 2, + .power_ctrl = spitz_pcmcia_pwr, }; -EXPORT_SYMBOL(spitzscoop_device); -EXPORT_SYMBOL(spitzscoop2_device); +static void __init spitz_pcmcia_init(void) +{ + /* Akita has only one PCMCIA slot used */ + if (machine_is_akita()) + spitz_pcmcia_config.num_devs = 1; + + platform_scoop_config = &spitz_pcmcia_config; +} +#else +static inline void spitz_pcmcia_init(void) {} +#endif + +/****************************************************************************** + * GPIO keyboard + ******************************************************************************/ +#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE) -/* - * Spitz Keyboard Device - */ #define SPITZ_KEY_CALENDAR KEY_F1 #define SPITZ_KEY_ADDRESS KEY_F2 #define SPITZ_KEY_FN KEY_F3 @@ -263,7 +296,7 @@ EXPORT_SYMBOL(spitzscoop2_device); #define SPITZ_KEY_OK KEY_F11 #define SPITZ_KEY_MENU KEY_F12 -static const uint32_t spitzkbd_keymap[] = { +static const uint32_t spitz_keymap[] = { KEY(0, 0, KEY_LEFTCTRL), KEY(0, 1, KEY_1), KEY(0, 2, KEY_3), @@ -330,36 +363,47 @@ static const uint32_t spitzkbd_keymap[] = { KEY(6, 8, KEY_RIGHT), }; -static const struct matrix_keymap_data spitzkbd_keymap_data = { - .keymap = spitzkbd_keymap, - .keymap_size = ARRAY_SIZE(spitzkbd_keymap), +static const struct matrix_keymap_data spitz_keymap_data = { + .keymap = spitz_keymap, + .keymap_size = ARRAY_SIZE(spitz_keymap), }; -static const uint32_t spitzkbd_row_gpios[] = +static const uint32_t spitz_row_gpios[] = { 12, 17, 91, 34, 36, 38, 39 }; -static const uint32_t spitzkbd_col_gpios[] = +static const uint32_t spitz_col_gpios[] = { 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 }; -static struct matrix_keypad_platform_data spitzkbd_pdata = { - .keymap_data = &spitzkbd_keymap_data, - .row_gpios = spitzkbd_row_gpios, - .col_gpios = spitzkbd_col_gpios, - .num_row_gpios = ARRAY_SIZE(spitzkbd_row_gpios), - .num_col_gpios = ARRAY_SIZE(spitzkbd_col_gpios), +static struct matrix_keypad_platform_data spitz_mkp_pdata = { + .keymap_data = &spitz_keymap_data, + .row_gpios = spitz_row_gpios, + .col_gpios = spitz_col_gpios, + .num_row_gpios = ARRAY_SIZE(spitz_row_gpios), + .num_col_gpios = ARRAY_SIZE(spitz_col_gpios), .col_scan_delay_us = 10, .debounce_ms = 10, .wakeup = 1, }; -static struct platform_device spitzkbd_device = { +static struct platform_device spitz_mkp_device = { .name = "matrix-keypad", .id = -1, .dev = { - .platform_data = &spitzkbd_pdata, + .platform_data = &spitz_mkp_pdata, }, }; +static void __init spitz_mkp_init(void) +{ + platform_device_register(&spitz_mkp_device); +} +#else +static inline void spitz_mkp_init(void) {} +#endif +/****************************************************************************** + * GPIO keys + ******************************************************************************/ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) static struct gpio_keys_button spitz_gpio_keys[] = { { .type = EV_PWR, @@ -396,10 +440,18 @@ static struct platform_device spitz_gpio_keys_device = { }, }; +static void __init spitz_keys_init(void) +{ + platform_device_register(&spitz_gpio_keys_device); +} +#else +static inline void spitz_keys_init(void) {} +#endif -/* - * Spitz LEDs - */ +/****************************************************************************** + * LEDs + ******************************************************************************/ +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) static struct gpio_led spitz_gpio_leds[] = { { .name = "spitz:amber:charge", @@ -418,20 +470,27 @@ static struct gpio_led_platform_data spitz_gpio_leds_info = { .num_leds = ARRAY_SIZE(spitz_gpio_leds), }; -static struct platform_device spitzled_device = { +static struct platform_device spitz_led_device = { .name = "leds-gpio", .id = -1, .dev = { - .platform_data = &spitz_gpio_leds_info, + .platform_data = &spitz_gpio_leds_info, }, }; -#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) -static struct pxa2xx_spi_master spitz_spi_info = { - .num_chipselect = 3, -}; +static void __init spitz_leds_init(void) +{ + platform_device_register(&spitz_led_device); +} +#else +static inline void spitz_leds_init(void) {} +#endif -static void spitz_wait_for_hsync(void) +/****************************************************************************** + * SSP Devices + ******************************************************************************/ +#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) +static void spitz_ads7846_wait_for_hsync(void) { while (gpio_get_value(SPITZ_GPIO_HSYNC)) cpu_relax(); @@ -447,7 +506,7 @@ static struct ads7846_platform_data spitz_ads7846_info = { .y_plate_ohms = 486, .pressure_max = 1024, .gpio_pendown = SPITZ_GPIO_TP_INT, - .wait_for_sync = spitz_wait_for_hsync, + .wait_for_sync = spitz_ads7846_wait_for_hsync, }; static struct pxa2xx_spi_chip spitz_ads7846_chip = { @@ -485,72 +544,88 @@ static struct pxa2xx_spi_chip spitz_max1111_chip = { static struct spi_board_info spitz_spi_devices[] = { { - .modalias = "ads7846", - .max_speed_hz = 1200000, - .bus_num = 2, - .chip_select = 0, - .platform_data = &spitz_ads7846_info, - .controller_data= &spitz_ads7846_chip, - .irq = gpio_to_irq(SPITZ_GPIO_TP_INT), + .modalias = "ads7846", + .max_speed_hz = 1200000, + .bus_num = 2, + .chip_select = 0, + .platform_data = &spitz_ads7846_info, + .controller_data = &spitz_ads7846_chip, + .irq = gpio_to_irq(SPITZ_GPIO_TP_INT), }, { - .modalias = "corgi-lcd", - .max_speed_hz = 50000, - .bus_num = 2, - .chip_select = 1, - .platform_data = &spitz_lcdcon_info, - .controller_data= &spitz_lcdcon_chip, + .modalias = "corgi-lcd", + .max_speed_hz = 50000, + .bus_num = 2, + .chip_select = 1, + .platform_data = &spitz_lcdcon_info, + .controller_data = &spitz_lcdcon_chip, }, { - .modalias = "max1111", - .max_speed_hz = 450000, - .bus_num = 2, - .chip_select = 2, - .controller_data= &spitz_max1111_chip, + .modalias = "max1111", + .max_speed_hz = 450000, + .bus_num = 2, + .chip_select = 2, + .controller_data = &spitz_max1111_chip, }, }; -static void __init spitz_init_spi(void) +static struct pxa2xx_spi_master spitz_spi_info = { + .num_chipselect = 3, +}; + +static void __init spitz_spi_init(void) { + struct corgi_lcd_platform_data *lcd_data = &spitz_lcdcon_info; + if (machine_is_akita()) { - spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT; - spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON; + lcd_data->gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT; + lcd_data->gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON; } pxa2xx_set_spi_info(2, &spitz_spi_info); spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices)); } #else -static inline void spitz_init_spi(void) {} +static inline void spitz_spi_init(void) {} #endif +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) /* - * MMC/SD Device - * - * The card detect interrupt isn't debounced so we delay it by 250ms - * to give the card a chance to fully insert/eject. + * NOTE: The card detect interrupt isn't debounced so we delay it by 250ms to + * give the card a chance to fully insert/eject. */ static void spitz_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; - if (( 1 << vdd) & p_d->ocr_mask) - spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004); + if ((1 << vdd) & p_d->ocr_mask) + spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, SCOOP_CPR_SD_3V); else - spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000); + spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, 0x0); } static struct pxamci_platform_data spitz_mci_platform_data = { .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .setpower = spitz_mci_setpower, + .setpower = spitz_mci_setpower, .gpio_card_detect = SPITZ_GPIO_nSD_DETECT, .gpio_card_ro = SPITZ_GPIO_nSD_WP, .gpio_power = -1, }; +static void __init spitz_mmc_init(void) +{ + pxa_set_mci_info(&spitz_mci_platform_data); +} +#else +static inline void spitz_mmc_init(void) {} +#endif -/* - * USB Host (OHCI) - */ +/****************************************************************************** + * USB Host + ******************************************************************************/ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) static int spitz_ohci_init(struct device *dev) { int err; @@ -559,9 +634,7 @@ static int spitz_ohci_init(struct device *dev) if (err) return err; - /* Only Port 2 is connected - * Setup USB Port 2 Output Control Register - */ + /* Only Port 2 is connected, setup USB Port 2 Output Control Register */ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE; return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1); @@ -580,67 +653,95 @@ static struct pxaohci_platform_data spitz_ohci_platform_data = { .power_budget = 150, }; +static void __init spitz_uhc_init(void) +{ + pxa_set_ohci_info(&spitz_ohci_platform_data); +} +#else +static inline void spitz_uhc_init(void) {} +#endif -/* - * Irda - */ - +/****************************************************************************** + * IrDA + ******************************************************************************/ +#if defined(CONFIG_PXA_FICP) || defined(CONFIG_PXA_FICP_MODULE) static struct pxaficp_platform_data spitz_ficp_platform_data = { -/* .gpio_pwdown is set in spitz_init() and akita_init() accordingly */ .transceiver_cap = IR_SIRMODE | IR_OFF, }; +static void __init spitz_irda_init(void) +{ + if (machine_is_akita()) + spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON; + else + spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON; -/* - * Spitz PXA Framebuffer - */ + pxa_set_ficp_info(&spitz_ficp_platform_data); +} +#else +static inline void spitz_irda_init(void) {} +#endif +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) static struct pxafb_mode_info spitz_pxafb_modes[] = { -{ - .pixclock = 19231, - .xres = 480, - .yres = 640, - .bpp = 16, - .hsync_len = 40, - .left_margin = 46, - .right_margin = 125, - .vsync_len = 3, - .upper_margin = 1, - .lower_margin = 0, - .sync = 0, -},{ - .pixclock = 134617, - .xres = 240, - .yres = 320, - .bpp = 16, - .hsync_len = 20, - .left_margin = 20, - .right_margin = 46, - .vsync_len = 2, - .upper_margin = 1, - .lower_margin = 0, - .sync = 0, -}, + { + .pixclock = 19231, + .xres = 480, + .yres = 640, + .bpp = 16, + .hsync_len = 40, + .left_margin = 46, + .right_margin = 125, + .vsync_len = 3, + .upper_margin = 1, + .lower_margin = 0, + .sync = 0, + }, { + .pixclock = 134617, + .xres = 240, + .yres = 320, + .bpp = 16, + .hsync_len = 20, + .left_margin = 20, + .right_margin = 46, + .vsync_len = 2, + .upper_margin = 1, + .lower_margin = 0, + .sync = 0, + }, }; static struct pxafb_mach_info spitz_pxafb_info = { - .modes = &spitz_pxafb_modes[0], - .num_modes = 2, + .modes = spitz_pxafb_modes, + .num_modes = ARRAY_SIZE(spitz_pxafb_modes), .fixed_modes = 1, .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING, }; -static struct mtd_partition sharpsl_nand_partitions[] = { +static void __init spitz_lcd_init(void) +{ + set_pxa_fb_info(&spitz_pxafb_info); +} +#else +static inline void spitz_lcd_init(void) {} +#endif + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +#if defined(CONFIG_MTD_NAND_SHARPSL) || defined(CONFIG_MTD_NAND_SHARPSL_MODULE) +static struct mtd_partition spitz_nand_partitions[] = { { .name = "System Area", .offset = 0, .size = 7 * 1024 * 1024, - }, - { + }, { .name = "Root Filesystem", .offset = 7 * 1024 * 1024, - }, - { + }, { .name = "Home Filesystem", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, @@ -649,37 +750,72 @@ static struct mtd_partition sharpsl_nand_partitions[] = { static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; -static struct nand_bbt_descr sharpsl_bbt = { - .options = 0, - .offs = 4, - .len = 2, - .pattern = scan_ff_pattern +static struct nand_bbt_descr spitz_nand_bbt = { + .options = 0, + .offs = 4, + .len = 2, + .pattern = scan_ff_pattern +}; + +static struct nand_ecclayout akita_oobinfo = { + .oobfree = { {0x08, 0x09} }, + .eccbytes = 24, + .eccpos = { + 0x05, 0x01, 0x02, 0x03, 0x06, 0x07, 0x15, 0x11, + 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23, + 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37, + }, }; -static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = { - .badblock_pattern = &sharpsl_bbt, - .partitions = sharpsl_nand_partitions, - .nr_partitions = ARRAY_SIZE(sharpsl_nand_partitions), +static struct sharpsl_nand_platform_data spitz_nand_pdata = { + .badblock_pattern = &spitz_nand_bbt, + .partitions = spitz_nand_partitions, + .nr_partitions = ARRAY_SIZE(spitz_nand_partitions), }; -static struct resource sharpsl_nand_resources[] = { +static struct resource spitz_nand_resources[] = { { - .start = 0x0C000000, - .end = 0x0C000FFF, + .start = PXA_CS3_PHYS, + .end = PXA_CS3_PHYS + SZ_4K - 1, .flags = IORESOURCE_MEM, }, }; -static struct platform_device sharpsl_nand_device = { +static struct platform_device spitz_nand_device = { .name = "sharpsl-nand", .id = -1, - .resource = sharpsl_nand_resources, - .num_resources = ARRAY_SIZE(sharpsl_nand_resources), - .dev.platform_data = &sharpsl_nand_platform_data, + .resource = spitz_nand_resources, + .num_resources = ARRAY_SIZE(spitz_nand_resources), + .dev = { + .platform_data = &spitz_nand_pdata, + } }; +static void __init spitz_nand_init(void) +{ + if (machine_is_spitz()) { + spitz_nand_partitions[1].size = 5 * 1024 * 1024; + } else if (machine_is_akita()) { + spitz_nand_partitions[1].size = 58 * 1024 * 1024; + spitz_nand_bbt.len = 1; + spitz_nand_pdata.ecc_layout = &akita_oobinfo; + } else if (machine_is_borzoi()) { + spitz_nand_partitions[1].size = 32 * 1024 * 1024; + spitz_nand_bbt.len = 1; + spitz_nand_pdata.ecc_layout = &akita_oobinfo; + } + + platform_device_register(&spitz_nand_device); +} +#else +static inline void spitz_nand_init(void) {} +#endif -static struct mtd_partition sharpsl_rom_parts[] = { +/****************************************************************************** + * NOR Flash + ******************************************************************************/ +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static struct mtd_partition spitz_rom_parts[] = { { .name ="Boot PROM Filesystem", .offset = 0x00140000, @@ -687,37 +823,105 @@ static struct mtd_partition sharpsl_rom_parts[] = { }, }; -static struct physmap_flash_data sharpsl_rom_data = { +static struct physmap_flash_data spitz_rom_data = { .width = 2, - .nr_parts = ARRAY_SIZE(sharpsl_rom_parts), - .parts = sharpsl_rom_parts, + .nr_parts = ARRAY_SIZE(spitz_rom_parts), + .parts = spitz_rom_parts, }; -static struct resource sharpsl_rom_resources[] = { +static struct resource spitz_rom_resources[] = { { - .start = 0x00000000, - .end = 0x007fffff, + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_8M - 1, .flags = IORESOURCE_MEM, }, }; -static struct platform_device sharpsl_rom_device = { - .name = "physmap-flash", - .id = -1, - .resource = sharpsl_rom_resources, - .num_resources = ARRAY_SIZE(sharpsl_rom_resources), - .dev.platform_data = &sharpsl_rom_data, +static struct platform_device spitz_rom_device = { + .name = "physmap-flash", + .id = -1, + .resource = spitz_rom_resources, + .num_resources = ARRAY_SIZE(spitz_rom_resources), + .dev = { + .platform_data = &spitz_rom_data, + }, }; -static struct platform_device *devices[] __initdata = { - &spitzscoop_device, - &spitzkbd_device, - &spitz_gpio_keys_device, - &spitzled_device, - &sharpsl_nand_device, - &sharpsl_rom_device, +static void __init spitz_nor_init(void) +{ + platform_device_register(&spitz_rom_device); +} +#else +static inline void spitz_nor_init(void) {} +#endif + +/****************************************************************************** + * GPIO expander + ******************************************************************************/ +#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE) +static struct pca953x_platform_data akita_pca953x_pdata = { + .gpio_base = AKITA_IOEXP_GPIO_BASE, }; +static struct i2c_board_info spitz_i2c_devs[] = { + { + .type = "wm8750", + .addr = 0x1b, + }, { + .type = "max7310", + .addr = 0x18, + .platform_data = &akita_pca953x_pdata, + }, +}; + +static struct regulator_consumer_supply isl6271a_consumers[] = { + { + .supply = "vcc_core", + } +}; + +static struct regulator_init_data isl6271a_info[] = { + { + .constraints = { + .name = "vcc_core range", + .min_uV = 850000, + .max_uV = 1600000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .consumer_supplies = isl6271a_consumers, + .num_consumer_supplies = ARRAY_SIZE(isl6271a_consumers), + } +}; + +static struct i2c_board_info spitz_pi2c_devs[] = { + { + .type = "isl6271a", + .addr = 0x0c, + .platform_data = &isl6271a_info, + }, +}; + +static void __init spitz_i2c_init(void) +{ + int size = ARRAY_SIZE(spitz_i2c_devs); + + /* Only Akita has the max7310 chip */ + if (!machine_is_akita()) + size--; + + pxa_set_i2c_info(NULL); + pxa27x_set_i2c_power_info(NULL); + i2c_register_board_info(0, spitz_i2c_devs, size); + i2c_register_board_info(1, ARRAY_AND_SIZE(spitz_pi2c_devs)); +} +#else +static inline void spitz_i2c_init(void) {} +#endif + +/****************************************************************************** + * Machine init + ******************************************************************************/ static void spitz_poweroff(void) { arm_machine_restart('g', NULL); @@ -726,26 +930,18 @@ static void spitz_poweroff(void) static void spitz_restart(char mode, const char *cmd) { /* Bootloader magic for a reboot */ - if((MSC0 & 0xffff0000) == 0x7ff00000) + if ((MSC0 & 0xffff0000) == 0x7ff00000) MSC0 = (MSC0 & 0xffff) | 0x7ee00000; spitz_poweroff(); } -static void __init common_init(void) +static void __init spitz_init(void) { init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0); pm_power_off = spitz_poweroff; arm_pm_restart = spitz_restart; - if (machine_is_spitz()) { - sharpsl_nand_partitions[1].size = 5 * 1024 * 1024; - } else if (machine_is_akita()) { - sharpsl_nand_partitions[1].size = 58 * 1024 * 1024; - } else if (machine_is_borzoi()) { - sharpsl_nand_partitions[1].size = 32 * 1024 * 1024; - } - PMCR = 0x00; /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ @@ -757,91 +953,22 @@ static void __init common_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - spitz_init_spi(); - - platform_add_devices(devices, ARRAY_SIZE(devices)); - pxa_set_mci_info(&spitz_mci_platform_data); - pxa_set_ohci_info(&spitz_ohci_platform_data); - pxa_set_ficp_info(&spitz_ficp_platform_data); - set_pxa_fb_info(&spitz_pxafb_info); - pxa_set_i2c_info(NULL); + spitz_spi_init(); + spitz_scoop_init(); + spitz_mkp_init(); + spitz_keys_init(); + spitz_leds_init(); + spitz_mmc_init(); + spitz_pcmcia_init(); + spitz_irda_init(); + spitz_uhc_init(); + spitz_lcd_init(); + spitz_nor_init(); + spitz_nand_init(); + spitz_i2c_init(); } -#if defined(CONFIG_MACH_AKITA) || defined(CONFIG_MACH_BORZOI) -static struct nand_bbt_descr sharpsl_akita_bbt = { - .options = 0, - .offs = 4, - .len = 1, - .pattern = scan_ff_pattern -}; - -static struct nand_ecclayout akita_oobinfo = { - .eccbytes = 24, - .eccpos = { - 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11, - 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23, - 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37}, - .oobfree = {{0x08, 0x09}} -}; -#endif - -#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI) -static void __init spitz_init(void) -{ - spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON; - -#ifdef CONFIG_MACH_BORZOI - if (machine_is_borzoi()) { - sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt; - sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo; - } -#endif - - platform_scoop_config = &spitz_pcmcia_config; - - common_init(); - - platform_device_register(&spitzscoop2_device); -} -#endif - -#ifdef CONFIG_MACH_AKITA -/* - * Akita IO Expander - */ -static struct pca953x_platform_data akita_ioexp = { - .gpio_base = AKITA_IOEXP_GPIO_BASE, -}; - -static struct i2c_board_info akita_i2c_board_info[] = { - { - .type = "max7310", - .addr = 0x18, - .platform_data = &akita_ioexp, - }, { - .type = "wm8750", - .addr = 0x1b, - }, -}; - -static void __init akita_init(void) -{ - spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON; - - sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt; - sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo; - - /* We just pretend the second element of the array doesn't exist */ - spitz_pcmcia_config.num_devs = 1; - platform_scoop_config = &spitz_pcmcia_config; - - i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info)); - - common_init(); -} -#endif - -static void __init fixup_spitz(struct machine_desc *desc, +static void __init spitz_fixup(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi) { sharpsl_save_param(); @@ -854,7 +981,7 @@ static void __init fixup_spitz(struct machine_desc *desc, MACHINE_START(SPITZ, "SHARP Spitz") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .fixup = fixup_spitz, + .fixup = spitz_fixup, .map_io = pxa_map_io, .init_irq = pxa27x_init_irq, .init_machine = spitz_init, @@ -866,7 +993,7 @@ MACHINE_END MACHINE_START(BORZOI, "SHARP Borzoi") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .fixup = fixup_spitz, + .fixup = spitz_fixup, .map_io = pxa_map_io, .init_irq = pxa27x_init_irq, .init_machine = spitz_init, @@ -878,10 +1005,10 @@ MACHINE_END MACHINE_START(AKITA, "SHARP Akita") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .fixup = fixup_spitz, + .fixup = spitz_fixup, .map_io = pxa_map_io, .init_irq = pxa27x_init_irq, - .init_machine = akita_init, + .init_machine = spitz_init, .timer = &pxa_timer, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 4209ddf6da61..7fe74067d85f 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -22,11 +22,10 @@ #include <asm/mach-types.h> #include <mach/hardware.h> -#include <mach/sharpsl.h> #include <mach/spitz.h> #include <mach/pxa27x.h> +#include <mach/sharpsl_pm.h> -#include "sharpsl.h" #include "generic.h" #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ @@ -178,11 +177,11 @@ unsigned long spitzpm_read_devdata(int type) case SHARPSL_STATUS_ACIN: return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0); case SHARPSL_STATUS_LOCK: - return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock); + return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock); case SHARPSL_STATUS_CHRGFULL: - return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull); + return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull); case SHARPSL_STATUS_FATAL: - return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal); + return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal); case SHARPSL_ACIN_VOLT: return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT); case SHARPSL_BATT_TEMP: @@ -212,8 +211,6 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = { .should_wakeup = spitz_should_wakeup, #if defined(CONFIG_LCD_CORGI) .backlight_limit = corgi_lcd_limit_intensity, -#elif defined(CONFIG_BACKLIGHT_CORGI) - .backlight_limit = corgibl_limit_intensity, #endif .charge_on_volt = SHARPSL_CHARGE_ON_VOLT, .charge_on_temp = SHARPSL_CHARGE_ON_TEMP, diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index af40d2a12d37..a654d1e6b38a 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -29,6 +29,7 @@ #include <linux/i2c/at24.h> #include <linux/smc91x.h> #include <linux/gpio.h> +#include <linux/leds.h> #include <asm/types.h> #include <asm/setup.h> @@ -62,37 +63,12 @@ #define SG2_GPIO_nSD_DETECT 90 #define SG2_SD_POWER_ENABLE 89 -static unsigned long stargate2_pin_config[] __initdata = { - - GPIO15_nCS_1, /* SRAM */ - /* SMC91x */ - GPIO80_nCS_4, - GPIO40_GPIO, /*cable detect?*/ +static unsigned long sg2_im2_unified_pin_config[] __initdata = { /* Device Identification for wakeup*/ GPIO102_GPIO, - - /* Button */ - GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH, - /* DA9030 */ GPIO1_GPIO, - /* Compact Flash */ - GPIO79_PSKTSEL, - GPIO48_nPOE, - GPIO49_nPWE, - GPIO50_nPIOR, - GPIO51_nPIOW, - GPIO85_nPCE_1, - GPIO54_nPCE_2, - GPIO55_nPREG, - GPIO56_nPWAIT, - GPIO57_nIOIS16, - GPIO120_GPIO, /* Buff ctrl */ - GPIO108_GPIO, /* Power ctrl */ - GPIO82_GPIO, /* Reset */ - GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */ - /* MMC */ GPIO32_MMC_CLK, GPIO112_MMC_CMD, @@ -100,49 +76,44 @@ static unsigned long stargate2_pin_config[] __initdata = { GPIO109_MMC_DAT_1, GPIO110_MMC_DAT_2, GPIO111_MMC_DAT_3, - GPIO90_GPIO, /* nSD detect */ - GPIO89_GPIO, /* SD_POWER_ENABLE */ - /* Bluetooth */ - GPIO81_GPIO, /* reset */ - - /* cc2420 802.15.4 radio */ - GPIO22_GPIO, /* CC_RSTN (out)*/ - GPIO114_GPIO, /* CC_FIFO (in) */ - GPIO116_GPIO, /* CC_CCA (in) */ - GPIO0_GPIO, /* CC_FIFOP (in) */ - GPIO16_GPIO, /* CCSFD (in) */ - GPIO39_GPIO, /* CSn (out) */ + /* 802.15.4 radio - driver out of mainline */ + GPIO22_GPIO, /* CC_RSTN */ + GPIO114_GPIO, /* CC_FIFO */ + GPIO116_GPIO, /* CC_CCA */ + GPIO0_GPIO, /* CC_FIFOP */ + GPIO16_GPIO, /* CCSFD */ + GPIO115_GPIO, /* Power enable */ /* I2C */ GPIO117_I2C_SCL, GPIO118_I2C_SDA, /* SSP 3 - 802.15.4 radio */ - GPIO39_GPIO, /* chip select */ + GPIO39_GPIO, /* Chip Select */ GPIO34_SSP3_SCLK, GPIO35_SSP3_TXD, GPIO41_SSP3_RXD, - /* SSP 2 */ + /* SSP 2 to daughter boards */ GPIO11_SSP2_RXD, GPIO38_SSP2_TXD, GPIO36_SSP2_SCLK, GPIO37_GPIO, /* chip select */ - /* SSP 1 */ - GPIO26_SSP1_RXD, - GPIO25_SSP1_TXD, + /* SSP 1 - to daughter boards */ + GPIO24_GPIO, /* Chip Select */ GPIO23_SSP1_SCLK, - GPIO24_GPIO, /* chip select */ + GPIO25_SSP1_TXD, + GPIO26_SSP1_RXD, - /* BTUART */ + /* BTUART Basic Connector*/ GPIO42_BTUART_RXD, GPIO43_BTUART_TXD, GPIO44_BTUART_CTS, GPIO45_BTUART_RTS, - /* STUART */ + /* STUART - IM2 via debug board not sure on SG2*/ GPIO46_STUART_RXD, GPIO47_STUART_TXD, @@ -150,47 +121,17 @@ static unsigned long stargate2_pin_config[] __initdata = { GPIO96_GPIO, /* accelerometer interrupt */ GPIO99_GPIO, /* ADC interrupt */ - /* Connector pins specified as gpios */ - GPIO94_GPIO, /* large basic connector pin 14 */ - GPIO10_GPIO, /* large basic connector pin 23 */ - /* SHT15 */ GPIO100_GPIO, GPIO98_GPIO, -}; -/** - * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state - **/ -static int stargate2_reset_bluetooth(void) -{ - int err; - err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET"); - if (err) { - printk(KERN_ERR "Could not get gpio for bluetooth reset \n"); - return err; - } - gpio_direction_output(SG2_BT_RESET, 1); - mdelay(5); - /* now reset it - 5 msec minimum */ - gpio_set_value(SG2_BT_RESET, 0); - mdelay(10); - gpio_set_value(SG2_BT_RESET, 1); - gpio_free(SG2_BT_RESET); - return 0; -} + /* Basic sensor board */ + GPIO96_GPIO, /* accelerometer interrupt */ + GPIO99_GPIO, /* ADC interrupt */ -static struct led_info stargate2_leds[] = { - { - .name = "sg2:red", - .flags = DA9030_LED_RATE_ON, - }, { - .name = "sg2:blue", - .flags = DA9030_LED_RATE_ON, - }, { - .name = "sg2:green", - .flags = DA9030_LED_RATE_ON, - }, + /* Connector pins specified as gpios */ + GPIO94_GPIO, /* large basic connector pin 14 */ + GPIO10_GPIO, /* large basic connector pin 23 */ }; static struct sht15_platform_data platform_data_sht15 = { @@ -352,20 +293,184 @@ static struct regulator_init_data stargate2_ldo_init_data[] = { }, }; -static struct da903x_subdev_info stargate2_da9030_subdevs[] = { +static struct mtd_partition stargate2flash_partitions[] = { { - .name = "da903x-led", - .id = DA9030_ID_LED_2, - .platform_data = &stargate2_leds[0], + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = 0, }, { - .name = "da903x-led", - .id = DA9030_ID_LED_3, - .platform_data = &stargate2_leds[2], + .name = "Kernel", + .size = 0x00200000, + .offset = 0x00040000, + .mask_flags = 0 }, { - .name = "da903x-led", - .id = DA9030_ID_LED_4, - .platform_data = &stargate2_leds[1], + .name = "Filesystem", + .size = 0x01DC0000, + .offset = 0x00240000, + .mask_flags = 0 + }, +}; + +static struct resource flash_resources = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_32M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct flash_platform_data stargate2_flash_data = { + .map_name = "cfi_probe", + .parts = stargate2flash_partitions, + .nr_parts = ARRAY_SIZE(stargate2flash_partitions), + .name = "PXA27xOnChipROM", + .width = 2, +}; + +static struct platform_device stargate2_flash_device = { + .name = "pxa2xx-flash", + .id = 0, + .dev = { + .platform_data = &stargate2_flash_data, + }, + .resource = &flash_resources, + .num_resources = 1, +}; + +static struct pxa2xx_spi_master pxa_ssp_master_0_info = { + .num_chipselect = 1, +}; + +static struct pxa2xx_spi_master pxa_ssp_master_1_info = { + .num_chipselect = 1, +}; + +static struct pxa2xx_spi_master pxa_ssp_master_2_info = { + .num_chipselect = 1, +}; + +/* An upcoming kernel change will scrap SFRM usage so these + * drivers have been moved to use gpio's via cs_control */ +static struct pxa2xx_spi_chip staccel_chip_info = { + .tx_threshold = 8, + .rx_threshold = 8, + .dma_burst_size = 8, + .timeout = 235, + .gpio_cs = 24, +}; + +static struct pxa2xx_spi_chip cc2420_info = { + .tx_threshold = 8, + .rx_threshold = 8, + .dma_burst_size = 8, + .timeout = 235, + .gpio_cs = 39, +}; + +static struct spi_board_info spi_board_info[] __initdata = { + { + .modalias = "lis3l02dq", + .max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */ + .bus_num = 1, + .chip_select = 0, + .controller_data = &staccel_chip_info, + .irq = IRQ_GPIO(96), }, { + .modalias = "cc2420", + .max_speed_hz = 6500000, + .bus_num = 3, + .chip_select = 0, + .controller_data = &cc2420_info, + }, +}; + +static void sg2_udc_command(int cmd) +{ + switch (cmd) { + case PXA2XX_UDC_CMD_CONNECT: + UP2OCR |= UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE; + break; + case PXA2XX_UDC_CMD_DISCONNECT: + UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE); + break; + } +} + +static struct i2c_pxa_platform_data i2c_pwr_pdata = { + .fast_mode = 1, +}; + +static struct i2c_pxa_platform_data i2c_pdata = { + .fast_mode = 1, +}; + +static void __init imote2_stargate2_init(void) +{ + + pxa2xx_mfp_config(ARRAY_AND_SIZE(sg2_im2_unified_pin_config)); + + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + + pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info); + pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info); + pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info); + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); + + + pxa27x_set_i2c_power_info(&i2c_pwr_pdata); + pxa_set_i2c_info(&i2c_pdata); +} + +#ifdef CONFIG_MACH_INTELMOTE2 +/* As the the imote2 doesn't currently have a conventional SD slot + * there is no option to hotplug cards, making all this rather simple + */ +static int imote2_mci_get_ro(struct device *dev) +{ + return 0; +} + +/* Rather simple case as hotplugging not possible */ +static struct pxamci_platform_data imote2_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */ + .get_ro = imote2_mci_get_ro, + .gpio_card_detect = -1, + .gpio_card_ro = -1, + .gpio_power = -1, +}; + +static struct gpio_led imote2_led_pins[] = { + { + .name = "imote2:red", + .gpio = 103, + .active_low = 1, + }, { + .name = "imote2:green", + .gpio = 104, + .active_low = 1, + }, { + .name = "imote2:blue", + .gpio = 105, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data imote2_led_data = { + .num_leds = ARRAY_SIZE(imote2_led_pins), + .leds = imote2_led_pins, +}; + +static struct platform_device imote2_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &imote2_led_data, + }, +}; + +static struct da903x_subdev_info imote2_da9030_subdevs[] = { + { .name = "da903x-regulator", .id = DA9030_ID_LDO2, .platform_data = &stargate2_ldo_init_data[vcc_bbio], @@ -428,9 +533,121 @@ static struct da903x_subdev_info stargate2_da9030_subdevs[] = { }, }; -static struct da903x_platform_data stargate2_da9030_pdata = { - .num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs), - .subdevs = stargate2_da9030_subdevs, +static struct da903x_platform_data imote2_da9030_pdata = { + .num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs), + .subdevs = imote2_da9030_subdevs, +}; + +static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = { + { + .type = "da9030", + .addr = 0x49, + .platform_data = &imote2_da9030_pdata, + .irq = gpio_to_irq(1), + }, +}; + +static struct i2c_board_info __initdata imote2_i2c_board_info[] = { + { /* UCAM sensor board */ + .type = "max1239", + .addr = 0x35, + }, { /* ITS400 Sensor board only */ + .type = "max1363", + .addr = 0x34, + /* Through a nand gate - Also beware, on V2 sensor board the + * pull up resistors are missing. + */ + .irq = IRQ_GPIO(99), + }, { /* ITS400 Sensor board only */ + .type = "tsl2561", + .addr = 0x49, + /* Through a nand gate - Also beware, on V2 sensor board the + * pull up resistors are missing. + */ + .irq = IRQ_GPIO(99), + }, { /* ITS400 Sensor board only */ + .type = "tmp175", + .addr = 0x4A, + .irq = IRQ_GPIO(96), + }, { /* IMB400 Multimedia board */ + .type = "wm8940", + .addr = 0x1A, + }, +}; + +static unsigned long imote2_pin_config[] __initdata = { + + /* Button */ + GPIO91_GPIO, + + /* LEDS */ + GPIO103_GPIO, /* red led */ + GPIO104_GPIO, /* green led */ + GPIO105_GPIO, /* blue led */ +}; + +static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = { + .udc_command = sg2_udc_command, +}; + +static struct platform_device *imote2_devices[] = { + &stargate2_flash_device, + &imote2_leds, + &sht15, +}; + +static void __init imote2_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config)); + + imote2_stargate2_init(); + + platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices)); + + i2c_register_board_info(0, imote2_i2c_board_info, + ARRAY_SIZE(imote2_i2c_board_info)); + i2c_register_board_info(1, imote2_pwr_i2c_board_info, + ARRAY_SIZE(imote2_pwr_i2c_board_info)); + + pxa_set_mci_info(&imote2_mci_platform_data); + pxa_set_udc_info(&imote2_udc_info); +} +#endif + +#ifdef CONFIG_MACH_STARGATE2 + +static unsigned long stargate2_pin_config[] __initdata = { + + GPIO15_nCS_1, /* SRAM */ + /* SMC91x */ + GPIO80_nCS_4, + GPIO40_GPIO, /*cable detect?*/ + + /* Button */ + GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH, + + /* Compact Flash */ + GPIO79_PSKTSEL, + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO85_nPCE_1, + GPIO54_nPCE_2, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + GPIO120_GPIO, /* Buff ctrl */ + GPIO108_GPIO, /* Power ctrl */ + GPIO82_GPIO, /* Reset */ + GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */ + + /* MMC not shared with imote2 */ + GPIO90_GPIO, /* nSD detect */ + GPIO89_GPIO, /* SD_POWER_ENABLE */ + + /* Bluetooth */ + GPIO81_GPIO, /* reset */ }; static struct resource smc91x_resources[] = { @@ -463,7 +680,6 @@ static struct platform_device smc91x_device = { }; - /* * The card detect interrupt isn't debounced so we delay it by 250ms * to give the card a chance to fully insert / eject. @@ -532,48 +748,6 @@ static struct pxamci_platform_data stargate2_mci_platform_data = { .exit = stargate2_mci_exit, }; -static struct mtd_partition stargate2flash_partitions[] = { - { - .name = "Bootloader", - .size = 0x00040000, - .offset = 0, - .mask_flags = 0, - }, { - .name = "Kernel", - .size = 0x00200000, - .offset = 0x00040000, - .mask_flags = 0 - }, { - .name = "Filesystem", - .size = 0x01DC0000, - .offset = 0x00240000, - .mask_flags = 0 - }, -}; - -static struct resource flash_resources = { - .start = PXA_CS0_PHYS, - .end = PXA_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct flash_platform_data stargate2_flash_data = { - .map_name = "cfi_probe", - .parts = stargate2flash_partitions, - .nr_parts = ARRAY_SIZE(stargate2flash_partitions), - .name = "PXA27xOnChipROM", - .width = 2, -}; - -static struct platform_device stargate2_flash_device = { - .name = "pxa2xx-flash", - .id = 0, - .dev = { - .platform_data = &stargate2_flash_data, - }, - .resource = &flash_resources, - .num_resources = 1, -}; /* * SRAM - The Stargate 2 has 32MB of SRAM. @@ -616,6 +790,129 @@ static struct at24_platform_data pca9500_eeprom_pdata = { .page_size = 4, }; +/** + * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state + **/ +static int stargate2_reset_bluetooth(void) +{ + int err; + err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET"); + if (err) { + printk(KERN_ERR "Could not get gpio for bluetooth reset\n"); + return err; + } + gpio_direction_output(SG2_BT_RESET, 1); + mdelay(5); + /* now reset it - 5 msec minimum */ + gpio_set_value(SG2_BT_RESET, 0); + mdelay(10); + gpio_set_value(SG2_BT_RESET, 1); + gpio_free(SG2_BT_RESET); + return 0; +} + +static struct led_info stargate2_leds[] = { + { + .name = "sg2:red", + .flags = DA9030_LED_RATE_ON, + }, { + .name = "sg2:blue", + .flags = DA9030_LED_RATE_ON, + }, { + .name = "sg2:green", + .flags = DA9030_LED_RATE_ON, + }, +}; + +static struct da903x_subdev_info stargate2_da9030_subdevs[] = { + { + .name = "da903x-led", + .id = DA9030_ID_LED_2, + .platform_data = &stargate2_leds[0], + }, { + .name = "da903x-led", + .id = DA9030_ID_LED_3, + .platform_data = &stargate2_leds[2], + }, { + .name = "da903x-led", + .id = DA9030_ID_LED_4, + .platform_data = &stargate2_leds[1], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO2, + .platform_data = &stargate2_ldo_init_data[vcc_bbio], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO3, + .platform_data = &stargate2_ldo_init_data[vcc_bb], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO4, + .platform_data = &stargate2_ldo_init_data[vcc_pxa_flash], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO5, + .platform_data = &stargate2_ldo_init_data[vcc_cc2420], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO6, + .platform_data = &stargate2_ldo_init_data[vcc_vref], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO7, + .platform_data = &stargate2_ldo_init_data[vcc_sram_ext], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO8, + .platform_data = &stargate2_ldo_init_data[vcc_mica], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO9, + .platform_data = &stargate2_ldo_init_data[vcc_bt], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO10, + .platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO11, + .platform_data = &stargate2_ldo_init_data[vcc_sensor_3], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO12, + .platform_data = &stargate2_ldo_init_data[vcc_lcd], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO15, + .platform_data = &stargate2_ldo_init_data[vcc_pxa_pll], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO17, + .platform_data = &stargate2_ldo_init_data[vcc_pxa_usim], + }, { + .name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */ + .id = DA9030_ID_LDO18, + .platform_data = &stargate2_ldo_init_data[vcc_io], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO19, + .platform_data = &stargate2_ldo_init_data[vcc_pxa_mem], + }, +}; + +static struct da903x_platform_data stargate2_da9030_pdata = { + .num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs), + .subdevs = stargate2_da9030_subdevs, +}; + +static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = { + { + .type = "da9030", + .addr = 0x49, + .platform_data = &stargate2_da9030_pdata, + .irq = gpio_to_irq(1), + }, +}; static struct i2c_board_info __initdata stargate2_i2c_board_info[] = { /* Techically this a pca9500 - but it's compatible with the 8574 @@ -653,74 +950,6 @@ static struct i2c_board_info __initdata stargate2_i2c_board_info[] = { }, }; -static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = { - { - .type = "da9030", - .addr = 0x49, - .platform_data = &stargate2_da9030_pdata, - .irq = gpio_to_irq(1), - }, -}; - -static struct pxa2xx_spi_master pxa_ssp_master_0_info = { - .num_chipselect = 1, -}; - -static struct pxa2xx_spi_master pxa_ssp_master_1_info = { - .num_chipselect = 1, -}; - -static struct pxa2xx_spi_master pxa_ssp_master_2_info = { - .num_chipselect = 1, -}; - -/* An upcoming kernel change will scrap SFRM usage so these - * drivers have been moved to use gpio's via cs_control */ -static struct pxa2xx_spi_chip staccel_chip_info = { - .tx_threshold = 8, - .rx_threshold = 8, - .dma_burst_size = 8, - .timeout = 235, - .gpio_cs = 24, -}; - -static struct pxa2xx_spi_chip cc2420_info = { - .tx_threshold = 8, - .rx_threshold = 8, - .dma_burst_size = 8, - .timeout = 235, - .gpio_cs = 39, -}; - -static struct spi_board_info spi_board_info[] __initdata = { - { - .modalias = "lis3l02dq", - .max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */ - .bus_num = 1, - .chip_select = 0, - .controller_data = &staccel_chip_info, - .irq = IRQ_GPIO(96), - }, { - .modalias = "cc2420", - .max_speed_hz = 6500000, - .bus_num = 3, - .chip_select = 0, - .controller_data = &cc2420_info, - }, -}; - -static void sg2_udc_command(int cmd) -{ - switch (cmd) { - case PXA2XX_UDC_CMD_CONNECT: - UP2OCR |= UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE; - break; - case PXA2XX_UDC_CMD_DISCONNECT: - UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE); - break; - } -} - /* Board doesn't support cable detection - so always lie and say * something is there. */ @@ -741,14 +970,6 @@ static struct platform_device *stargate2_devices[] = { &sht15, }; -static struct i2c_pxa_platform_data i2c_pwr_pdata = { - .fast_mode = 1, -}; - -static struct i2c_pxa_platform_data i2c_pdata = { - .fast_mode = 1, -}; - static void __init stargate2_init(void) { /* This is probably a board specific hack as this must be set @@ -757,22 +978,13 @@ static void __init stargate2_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config)); - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); + imote2_stargate2_init(); platform_add_devices(ARRAY_AND_SIZE(stargate2_devices)); - pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info); - pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info); - pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info); - spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); - i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info)); - i2c_register_board_info(1, - ARRAY_AND_SIZE(stargate2_pwr_i2c_board_info)); - pxa27x_set_i2c_power_info(&i2c_pwr_pdata); - pxa_set_i2c_info(&i2c_pdata); + i2c_register_board_info(1, stargate2_pwr_i2c_board_info, + ARRAY_SIZE(stargate2_pwr_i2c_board_info)); pxa_set_mci_info(&stargate2_mci_platform_data); @@ -780,7 +992,21 @@ static void __init stargate2_init(void) stargate2_reset_bluetooth(); } +#endif + +#ifdef CONFIG_MACH_INTELMOTE2 +MACHINE_START(INTELMOTE2, "IMOTE 2") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = imote2_init, + .boot_params = 0xA0000100, +MACHINE_END +#endif +#ifdef CONFIG_MACH_STARGATE2 MACHINE_START(STARGATE2, "Stargate 2") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, @@ -790,3 +1016,4 @@ MACHINE_START(STARGATE2, "Stargate 2") .init_machine = stargate2_init, .boot_params = 0xA0000100, MACHINE_END +#endif diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 69689112eae7..0acff172ef22 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -530,13 +530,9 @@ static void __init trizeps4_init(void) i2c_register_board_info(0, trizeps4_i2c_devices, ARRAY_SIZE(trizeps4_i2c_devices)); -#ifdef CONFIG_IDE_PXA_CF - /* if boot direct from compact flash dont disable power */ - trizeps_conxs_bcr = 0x0009; -#else /* this is the reset value */ trizeps_conxs_bcr = 0x00A0; -#endif + BCR_writew(trizeps_conxs_bcr); board_backlight_power(1); } diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index 9884fa978f16..c9b747cedea8 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -25,6 +25,7 @@ #include <linux/dm9000.h> #include <linux/ucb1400.h> #include <linux/ata_platform.h> +#include <linux/regulator/max1586.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -37,6 +38,7 @@ #include <mach/ohci.h> #include <mach/pxa27x-udc.h> #include <mach/udc.h> +#include <mach/pata_pxa.h> #include <plat/i2c.h> @@ -464,7 +466,6 @@ static struct i2c_board_info __initdata vpac270_i2c_devs[] = { static void __init vpac270_rtc_init(void) { - pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs)); } #else @@ -492,7 +493,55 @@ static struct pxafb_mode_info vpac270_lcd_modes[] = { .vsync_len = 2, .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -}, +}, { /* CRT 640x480 */ + .pixclock = 35000, + .xres = 640, + .yres = 480, + .bpp = 16, + .depth = 16, + + .left_margin = 96, + .right_margin = 48, + .upper_margin = 33, + .lower_margin = 10, + + .hsync_len = 48, + .vsync_len = 1, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +}, { /* CRT 800x600 H=30kHz V=48HZ */ + .pixclock = 25000, + .xres = 800, + .yres = 600, + .bpp = 16, + .depth = 16, + + .left_margin = 50, + .right_margin = 1, + .upper_margin = 21, + .lower_margin = 12, + + .hsync_len = 8, + .vsync_len = 1, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +}, { /* CRT 1024x768 H=40kHz V=50Hz */ + .pixclock = 15000, + .xres = 1024, + .yres = 768, + .bpp = 16, + .depth = 16, + + .left_margin = 220, + .right_margin = 8, + .upper_margin = 33, + .lower_margin = 2, + + .hsync_len = 48, + .vsync_len = 1, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +} }; static struct pxafb_mach_info vpac270_lcd_screen = { @@ -538,9 +587,10 @@ static inline void vpac270_lcd_init(void) {} /****************************************************************************** * PATA IDE ******************************************************************************/ -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -static struct pata_platform_info vpac270_pata_pdata = { - .ioport_shift = 1, +#if defined(CONFIG_PATA_PXA) || defined(CONFIG_PATA_PXA_MODULE) +static struct pata_pxa_pdata vpac270_pata_pdata = { + .reg_shift = 1, + .dma_dreq = 1, .irq_flags = IRQF_TRIGGER_RISING, }; @@ -555,7 +605,12 @@ static struct resource vpac270_ide_resources[] = { .end = PXA_CS3_PHYS + 0x15f, .flags = IORESOURCE_MEM }, - [2] = { /* IDE IRQ pin */ + [2] = { /* DMA Base address */ + .start = PXA_CS3_PHYS + 0x20, + .end = PXA_CS3_PHYS + 0x2f, + .flags = IORESOURCE_DMA + }, + [3] = { /* IDE IRQ pin */ .start = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ), .end = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ), .flags = IORESOURCE_IRQ @@ -563,11 +618,12 @@ static struct resource vpac270_ide_resources[] = { }; static struct platform_device vpac270_ide_device = { - .name = "pata_platform", + .name = "pata_pxa", .num_resources = ARRAY_SIZE(vpac270_ide_resources), .resource = vpac270_ide_resources, .dev = { .platform_data = &vpac270_pata_pdata, + .coherent_dma_mask = 0xffffffff, } }; @@ -580,6 +636,59 @@ static inline void vpac270_ide_init(void) {} #endif /****************************************************************************** + * Core power regulator + ******************************************************************************/ +#if defined(CONFIG_REGULATOR_MAX1586) || \ + defined(CONFIG_REGULATOR_MAX1586_MODULE) +static struct regulator_consumer_supply vpac270_max1587a_consumers[] = { + { + .supply = "vcc_core", + } +}; + +static struct regulator_init_data vpac270_max1587a_v3_info = { + .constraints = { + .name = "vcc_core range", + .min_uV = 900000, + .max_uV = 1705000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .consumer_supplies = vpac270_max1587a_consumers, + .num_consumer_supplies = ARRAY_SIZE(vpac270_max1587a_consumers), +}; + +static struct max1586_subdev_data vpac270_max1587a_subdevs[] = { + { + .name = "vcc_core", + .id = MAX1586_V3, + .platform_data = &vpac270_max1587a_v3_info, + } +}; + +static struct max1586_platform_data vpac270_max1587a_info = { + .subdevs = vpac270_max1587a_subdevs, + .num_subdevs = ARRAY_SIZE(vpac270_max1587a_subdevs), + .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */ +}; + +static struct i2c_board_info __initdata vpac270_pi2c_board_info[] = { + { + I2C_BOARD_INFO("max1586", 0x14), + .platform_data = &vpac270_max1587a_info, + }, +}; + +static void __init vpac270_pmic_init(void) +{ + i2c_register_board_info(1, ARRAY_AND_SIZE(vpac270_pi2c_board_info)); +} +#else +static inline void vpac270_pmic_init(void) {} +#endif + + +/****************************************************************************** * Machine init ******************************************************************************/ static void __init vpac270_init(void) @@ -589,7 +698,10 @@ static void __init vpac270_init(void) pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); + pxa_set_i2c_info(NULL); + pxa27x_set_i2c_power_info(NULL); + vpac270_pmic_init(); vpac270_lcd_init(); vpac270_mmc_init(); vpac270_nor_init(); diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index d303c6929d32..f0d02288b4ca 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -17,6 +17,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/pwm_backlight.h> +#include <linux/z2_battery.h> #include <linux/dma-mapping.h> #include <linux/spi/spi.h> #include <linux/spi/libertas_spi.h> @@ -26,6 +27,7 @@ #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/delay.h> +#include <linux/regulator/machine.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -162,7 +164,7 @@ static struct mtd_partition z2_flash_parts[] = { }, { .name = "U-Boot Environment", .offset = 0x40000, - .size = 0x60000, + .size = 0x20000, }, { .name = "Flash", .offset = 0x60000, @@ -452,6 +454,42 @@ static inline void z2_keys_init(void) {} #endif /****************************************************************************** + * Battery + ******************************************************************************/ +#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE) +static struct z2_battery_info batt_chip_info = { + .batt_I2C_bus = 0, + .batt_I2C_addr = 0x55, + .batt_I2C_reg = 2, + .charge_gpio = GPIO0_ZIPITZ2_AC_DETECT, + .min_voltage = 2400000, + .max_voltage = 3700000, + .batt_div = 69, + .batt_mult = 1000000, + .batt_tech = POWER_SUPPLY_TECHNOLOGY_LION, + .batt_name = "Z2", +}; + +static struct i2c_board_info __initdata z2_i2c_board_info[] = { + { + I2C_BOARD_INFO("aer915", 0x55), + .platform_data = &batt_chip_info, + }, { + I2C_BOARD_INFO("wm8750", 0x1b), + }, + +}; + +static void __init z2_i2c_init(void) +{ + pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(z2_i2c_board_info)); +} +#else +static inline void z2_i2c_init(void) {} +#endif + +/****************************************************************************** * SSP Devices - WiFi and LCD control ******************************************************************************/ #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) @@ -573,23 +611,95 @@ static inline void z2_spi_init(void) {} #endif /****************************************************************************** + * Core power regulator + ******************************************************************************/ +#if defined(CONFIG_REGULATOR_TPS65023) || \ + defined(CONFIG_REGULATOR_TPS65023_MODULE) +static struct regulator_consumer_supply z2_tps65021_consumers[] = { + { + .supply = "vcc_core", + } +}; + +static struct regulator_init_data z2_tps65021_info[] = { + { + .constraints = { + .name = "vcc_core range", + .min_uV = 800000, + .max_uV = 1600000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .consumer_supplies = z2_tps65021_consumers, + .num_consumer_supplies = ARRAY_SIZE(z2_tps65021_consumers), + }, { + .constraints = { + .name = "DCDC2", + .min_uV = 3300000, + .max_uV = 3300000, + .always_on = 1, + }, + }, { + .constraints = { + .name = "DCDC3", + .min_uV = 1800000, + .max_uV = 1800000, + .always_on = 1, + }, + }, { + .constraints = { + .name = "LDO1", + .min_uV = 1000000, + .max_uV = 3150000, + .always_on = 1, + }, + }, { + .constraints = { + .name = "LDO2", + .min_uV = 1050000, + .max_uV = 3300000, + .always_on = 1, + }, + } +}; + +static struct i2c_board_info __initdata z2_pi2c_board_info[] = { + { + I2C_BOARD_INFO("tps65021", 0x48), + .platform_data = &z2_tps65021_info, + }, +}; + +static void __init z2_pmic_init(void) +{ + pxa27x_set_i2c_power_info(NULL); + i2c_register_board_info(1, ARRAY_AND_SIZE(z2_pi2c_board_info)); +} +#else +static inline void z2_pmic_init(void) {} +#endif + +/****************************************************************************** * Machine init ******************************************************************************/ static void __init z2_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(z2_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + z2_lcd_init(); z2_mmc_init(); z2_mkp_init(); - - pxa_set_i2c_info(NULL); - + z2_i2c_init(); z2_spi_init(); z2_nor_init(); z2_pwm_init(); z2_leds_init(); z2_keys_init(); + z2_pmic_init(); } MACHINE_START(ZIPIT2, "Zipit Z2") diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index f5a59727949f..071e8a1e0765 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -57,11 +57,21 @@ config S3C64XX_SETUP_I2C1 help Common setup code for i2c bus 1. +config S3C64XX_SETUP_IDE + bool + help + Common setup code for S3C64XX IDE. + config S3C64XX_SETUP_FB_24BPP bool help Common setup code for S3C64XX with an 24bpp RGB display helper. +config S3C64XX_SETUP_KEYPAD + bool + help + Common setup code for S3C64XX KEYPAD GPIO configurations + config S3C64XX_SETUP_SDHCI_GPIO bool help @@ -95,15 +105,20 @@ config MACH_SMDK6410 select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_I2C1 + select SAMSUNG_DEV_IDE select S3C_DEV_FB + select S3C_DEV_RTC select SAMSUNG_DEV_TS select S3C_DEV_USB_HOST select S3C_DEV_USB_HSOTG select S3C_DEV_WDT + select SAMSUNG_DEV_KEYPAD select HAVE_S3C2410_WATCHDOG select S3C64XX_SETUP_SDHCI select S3C64XX_SETUP_I2C1 + select S3C64XX_SETUP_IDE select S3C64XX_SETUP_FB_24BPP + select S3C64XX_SETUP_KEYPAD help Machine support for the Samsung SMDK6410 diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 9d1006938f5c..48d3dfac8dd7 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -35,6 +35,8 @@ obj-$(CONFIG_S3C64XX_DMA) += dma.o obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o +obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index fbd85a9b7bbf..7e03f0ae2fc8 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -133,6 +133,12 @@ static struct clk init_clocks_disable[] = { .id = -1, .parent = &clk_h, }, { + .name = "rtc", + .id = -1, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_RTC, + }, { .name = "adc", .id = -1, .parent = &clk_p, @@ -165,6 +171,12 @@ static struct clk init_clocks_disable[] = { .ctrlbit = S3C6410_CLKCON_PCLK_IIS2, }, { #endif + .name = "keypad", + .id = -1, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_KEYPAD, + }, { .name = "spi", .id = 0, .parent = &clk_p, @@ -295,12 +307,6 @@ static struct clk init_clocks[] = { .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_UART3, }, { - .name = "rtc", - .id = -1, - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_RTC, - }, { .name = "watchdog", .id = -1, .parent = &clk_p, @@ -310,6 +316,12 @@ static struct clk init_clocks[] = { .id = -1, .parent = &clk_p, .ctrlbit = S3C_CLKCON_PCLK_AC97, + }, { + .name = "cfcon", + .id = -1, + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_IHOST, } }; diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c index c3e9e73bd0f9..9648fbc36eec 100644 --- a/arch/arm/mach-s3c64xx/dev-audio.c +++ b/arch/arm/mach-s3c64xx/dev-audio.c @@ -12,11 +12,11 @@ #include <linux/string.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <mach/irqs.h> #include <mach/map.h> #include <mach/dma.h> -#include <mach/gpio.h> #include <plat/devs.h> #include <plat/audio.h> diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c index 29c32d088515..a492b982aa06 100644 --- a/arch/arm/mach-s3c64xx/dev-spi.c +++ b/arch/arm/mach-s3c64xx/dev-spi.c @@ -12,10 +12,10 @@ #include <linux/string.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <mach/dma.h> #include <mach/map.h> -#include <mach/gpio.h> #include <mach/gpio-bank-c.h> #include <mach/spi-clocks.h> diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c index 60c929a3cab6..300dee4a667b 100644 --- a/arch/arm/mach-s3c64xx/gpiolib.c +++ b/arch/arm/mach-s3c64xx/gpiolib.c @@ -15,9 +15,9 @@ #include <linux/kernel.h> #include <linux/irq.h> #include <linux/io.h> +#include <linux/gpio.h> #include <mach/map.h> -#include <mach/gpio.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h index e1eab3c94aea..a1f13f02c841 100644 --- a/arch/arm/mach-s3c64xx/include/mach/map.h +++ b/arch/arm/mach-s3c64xx/include/mach/map.h @@ -67,6 +67,7 @@ #define S3C64XX_PA_USB_HSOTG (0x7C000000) #define S3C64XX_PA_WATCHDOG (0x7E004000) #define S3C64XX_PA_RTC (0x7E005000) +#define S3C64XX_PA_KEYPAD (0x7E00A000) #define S3C64XX_PA_ADC (0x7E00B000) #define S3C64XX_PA_SYSCON (0x7E00F000) #define S3C64XX_PA_AC97 (0x7F001000) @@ -86,6 +87,9 @@ #define S3C64XX_SZ_GPIO SZ_4K #define S3C64XX_PA_SDRAM (0x50000000) + +#define S3C64XX_PA_CFCON (0x70300000) + #define S3C64XX_PA_VIC0 (0x71200000) #define S3C64XX_PA_VIC1 (0x71300000) @@ -120,5 +124,7 @@ #define S3C_PA_WDT S3C64XX_PA_WATCHDOG #define SAMSUNG_PA_ADC S3C64XX_PA_ADC +#define SAMSUNG_PA_CFCON S3C64XX_PA_CFCON +#define SAMSUNG_PA_KEYPAD S3C64XX_PA_KEYPAD #endif /* __ASM_ARCH_6400_MAP_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h index 0114eb0c1fe7..05332b998ec0 100644 --- a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h @@ -34,6 +34,7 @@ #define S3C_SCLK_GATE S3C_CLKREG(0x38) #define S3C_MEM0_GATE S3C_CLKREG(0x3C) #define S3C6410_CLK_SRC2 S3C_CLKREG(0x10C) +#define S3C_MEM_SYS_CFG S3C_CLKREG(0x120) /* CLKDIV0 */ #define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12) @@ -154,4 +155,8 @@ #define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2) #define S3C6400_CLKSRC_MFC (1 << 4) +/* MEM_SYS_CFG */ +#define MEM_SYS_CFG_INDEP_CF 0x4000 +#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30 + #endif /* _PLAT_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index d9a03555f88b..b5d78616c774 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -17,6 +17,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/input.h> #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -56,6 +57,7 @@ #include <mach/regs-gpio.h> #include <mach/regs-sys.h> #include <mach/regs-srom.h> +#include <plat/ata.h> #include <plat/iic.h> #include <plat/fb.h> #include <plat/gpio-cfg.h> @@ -66,6 +68,7 @@ #include <plat/cpu.h> #include <plat/adc.h> #include <plat/ts.h> +#include <plat/keypad.h> #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB @@ -242,6 +245,29 @@ static struct platform_device smdk6410_b_pwr_5v = { }; #endif +static struct s3c_ide_platdata smdk6410_ide_pdata __initdata = { + .setup_gpio = s3c64xx_ide_setup_gpio, +}; + +static uint32_t smdk6410_keymap[] __initdata = { + /* KEY(row, col, keycode) */ + KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3), + KEY(0, 6, KEY_4), KEY(0, 7, KEY_5), + KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C), + KEY(1, 6, KEY_D), KEY(1, 7, KEY_E) +}; + +static struct matrix_keymap_data smdk6410_keymap_data __initdata = { + .keymap = smdk6410_keymap, + .keymap_size = ARRAY_SIZE(smdk6410_keymap), +}; + +static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = { + .keymap_data = &smdk6410_keymap_data, + .rows = 2, + .cols = 8, +}; + static struct map_desc smdk6410_iodesc[] = {}; static struct platform_device *smdk6410_devices[] __initdata = { @@ -257,6 +283,7 @@ static struct platform_device *smdk6410_devices[] __initdata = { &s3c_device_ohci, &s3c_device_usb_hsotg, &s3c64xx_device_iisv4, + &samsung_device_keypad, #ifdef CONFIG_REGULATOR &smdk6410_b_pwr_5v, @@ -265,6 +292,8 @@ static struct platform_device *smdk6410_devices[] __initdata = { &smdk6410_smsc911x, &s3c_device_adc, + &s3c_device_cfcon, + &s3c_device_rtc, &s3c_device_ts, &s3c_device_wdt, }; @@ -636,6 +665,8 @@ static void __init smdk6410_machine_init(void) s3c_i2c1_set_platdata(NULL); s3c_fb_set_platdata(&smdk6410_lcd_pdata); + samsung_keypad_set_platdata(&smdk6410_keypad_data); + s3c24xx_ts_set_platdata(&s3c_ts_platform); /* configure nCS1 width to 16 bits */ @@ -665,6 +696,8 @@ static void __init smdk6410_machine_init(void) i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); + s3c_ide_set_platdata(&smdk6410_ide_pdata); + platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices)); } diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c index 014401c39f36..312aa6b115e8 100644 --- a/arch/arm/mach-s3c64xx/s3c6410.c +++ b/arch/arm/mach-s3c64xx/s3c6410.c @@ -37,8 +37,9 @@ #include <plat/devs.h> #include <plat/clock.h> #include <plat/sdhci.h> +#include <plat/ata-core.h> +#include <plat/adc-core.h> #include <plat/iic-core.h> -#include <plat/adc.h> #include <plat/onenand-core.h> #include <mach/s3c6400.h> #include <mach/s3c6410.h> @@ -54,10 +55,11 @@ void __init s3c6410_map_io(void) s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); - s3c_device_adc.name = "s3c64xx-adc"; + s3c_adc_setname("s3c64xx-adc"); s3c_device_nand.name = "s3c6400-nand"; s3c_onenand_setname("s3c6410-onenand"); s3c64xx_onenand1_setname("s3c6410-onenand"); + s3c_cfcon_setname("s3c64xx-pata"); } void __init s3c6410_init_clocks(int xtal) diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c index 8e28e448dd20..000736877df2 100644 --- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c +++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c @@ -15,9 +15,9 @@ #include <linux/kernel.h> #include <linux/types.h> #include <linux/fb.h> +#include <linux/gpio.h> #include <mach/regs-fb.h> -#include <mach/gpio.h> #include <plat/fb.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c index d1b11e6e77e8..406192a43c6e 100644 --- a/arch/arm/mach-s3c64xx/setup-i2c0.c +++ b/arch/arm/mach-s3c64xx/setup-i2c0.c @@ -14,10 +14,10 @@ #include <linux/kernel.h> #include <linux/types.h> +#include <linux/gpio.h> struct platform_device; /* don't need the contents */ -#include <mach/gpio.h> #include <mach/gpio-bank-b.h> #include <plat/iic.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c index 2dce57d8c6f8..1ee62c97cd7f 100644 --- a/arch/arm/mach-s3c64xx/setup-i2c1.c +++ b/arch/arm/mach-s3c64xx/setup-i2c1.c @@ -14,10 +14,10 @@ #include <linux/kernel.h> #include <linux/types.h> +#include <linux/gpio.h> struct platform_device; /* don't need the contents */ -#include <mach/gpio.h> #include <mach/gpio-bank-b.h> #include <plat/iic.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s3c64xx/setup-ide.c b/arch/arm/mach-s3c64xx/setup-ide.c new file mode 100644 index 000000000000..c12c315f33bc --- /dev/null +++ b/arch/arm/mach-s3c64xx/setup-ide.c @@ -0,0 +1,46 @@ +/* linux/arch/arm/mach-s3c64xx/setup-ide.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S3C64XX setup information for IDE + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/io.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <plat/gpio-cfg.h> + +void s3c64xx_ide_setup_gpio(void) +{ + u32 reg; + u32 gpio = 0; + + reg = readl(S3C_MEM_SYS_CFG) & (~0x3f); + + /* Independent CF interface, CF chip select configuration */ + writel(reg | MEM_SYS_CFG_INDEP_CF | + MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S3C_MEM_SYS_CFG); + + s3c_gpio_cfgpin(S3C64XX_GPB(4), S3C_GPIO_SFN(4)); + + /* Set XhiDATA[15:0] pins as CF Data[15:0] */ + for (gpio = S3C64XX_GPK(0); gpio <= S3C64XX_GPK(15); gpio++) + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(5)); + + /* Set XhiADDR[2:0] pins as CF ADDR[2:0] */ + for (gpio = S3C64XX_GPL(0); gpio <= S3C64XX_GPL(2); gpio++) + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6)); + + /* Set Xhi ctrl pins as CF ctrl pins(IORDY, IOWR, IORD, CE[0:1]) */ + s3c_gpio_cfgpin(S3C64XX_GPM(5), S3C_GPIO_SFN(1)); + for (gpio = S3C64XX_GPM(0); gpio <= S3C64XX_GPM(4); gpio++) + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6)); +} diff --git a/arch/arm/mach-s3c64xx/setup-keypad.c b/arch/arm/mach-s3c64xx/setup-keypad.c new file mode 100644 index 000000000000..abc34e4e1a93 --- /dev/null +++ b/arch/arm/mach-s3c64xx/setup-keypad.c @@ -0,0 +1,34 @@ +/* linux/arch/arm/mach-s3c64xx/setup-keypad.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * GPIO configuration for S3C64XX KeyPad device + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/gpio.h> +#include <plat/gpio-cfg.h> + +void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) +{ + unsigned int gpio; + unsigned int end; + + /* Set all the necessary GPK pins to special-function 3: KP_ROW[x] */ + end = S3C64XX_GPK(8 + rows); + for (gpio = S3C64XX_GPK(8); gpio < end; gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + /* Set all the necessary GPL pins to special-function 3: KP_COL[x] */ + end = S3C64XX_GPL(0 + cols); + for (gpio = S3C64XX_GPL(0); gpio < end; gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } +} diff --git a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c index a58c0cc7ba5e..322359591374 100644 --- a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c +++ b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c @@ -16,12 +16,14 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/gpio.h> -#include <mach/gpio.h> #include <plat/gpio-cfg.h> +#include <plat/sdhci.h> void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) { + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; unsigned int gpio; unsigned int end; @@ -33,12 +35,15 @@ void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); } - s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2)); + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2)); + } } void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) { + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; unsigned int gpio; unsigned int end; @@ -50,8 +55,10 @@ void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); } - s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3)); + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3)); + } } void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig index f066fae07c57..6a4af7f57584 100644 --- a/arch/arm/mach-s5p6440/Kconfig +++ b/arch/arm/mach-s5p6440/Kconfig @@ -13,13 +13,20 @@ config CPU_S5P6440 help Enable S5P6440 CPU support +config S5P6440_SETUP_I2C1 + bool + help + Common setup code for i2c bus 1. + config MACH_SMDK6440 bool "SMDK6440" select CPU_S5P6440 - select SAMSUNG_DEV_TS - select SAMSUNG_DEV_ADC + select S3C_DEV_I2C1 + select S3C_DEV_RTC select S3C_DEV_WDT - select HAVE_S3C2410_WATCHDOG + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_TS + select S5P6440_SETUP_I2C1 help Machine support for the Samsung SMDK6440 diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile index be3c53aab23f..c3fe4d3662a9 100644 --- a/arch/arm/mach-s5p6440/Makefile +++ b/arch/arm/mach-s5p6440/Makefile @@ -22,3 +22,4 @@ obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o # device support obj-y += dev-audio.o obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o +obj-$(CONFIG_S5P6440_SETUP_I2C1) += setup-i2c1.o diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c index b2fe6a58155a..526f33adb31d 100644 --- a/arch/arm/mach-s5p6440/cpu.c +++ b/arch/arm/mach-s5p6440/cpu.c @@ -37,6 +37,7 @@ #include <plat/devs.h> #include <plat/clock.h> #include <plat/s5p6440.h> +#include <plat/adc-core.h> static void s5p6440_idle(void) { @@ -61,7 +62,7 @@ static void s5p6440_idle(void) void __init s5p6440_map_io(void) { /* initialize any device information early */ - s3c_device_adc.name = "s3c64xx-adc"; + s3c_adc_setname("s3c64xx-adc"); } void __init s5p6440_init_clocks(int xtal) diff --git a/arch/arm/mach-s5p6440/dev-audio.c b/arch/arm/mach-s5p6440/dev-audio.c index 0c5367962830..3ca0d2b8275d 100644 --- a/arch/arm/mach-s5p6440/dev-audio.c +++ b/arch/arm/mach-s5p6440/dev-audio.c @@ -10,11 +10,11 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <plat/gpio-cfg.h> #include <plat/audio.h> -#include <mach/gpio.h> #include <mach/map.h> #include <mach/dma.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-s5p6440/dev-spi.c b/arch/arm/mach-s5p6440/dev-spi.c index 0a30280019c0..510af44d180c 100644 --- a/arch/arm/mach-s5p6440/dev-spi.c +++ b/arch/arm/mach-s5p6440/dev-spi.c @@ -10,11 +10,11 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <mach/dma.h> #include <mach/map.h> #include <mach/irqs.h> -#include <mach/gpio.h> #include <mach/spi-clocks.h> #include <plat/s3c64xx-spi.h> diff --git a/arch/arm/mach-s5p6440/gpio.c b/arch/arm/mach-s5p6440/gpio.c index 92efc05b1ba2..8bf6e0ce51c9 100644 --- a/arch/arm/mach-s5p6440/gpio.c +++ b/arch/arm/mach-s5p6440/gpio.c @@ -13,9 +13,11 @@ #include <linux/kernel.h> #include <linux/irq.h> #include <linux/io.h> +#include <linux/gpio.h> + #include <mach/map.h> -#include <mach/gpio.h> #include <mach/regs-gpio.h> + #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p6440/include/mach/irqs.h index 911854d9ad42..16a761270de1 100644 --- a/arch/arm/mach-s5p6440/include/mach/irqs.h +++ b/arch/arm/mach-s5p6440/include/mach/irqs.h @@ -51,7 +51,7 @@ #define IRQ_DISPCON3 S5P_IRQ_VIC1(19) #define IRQ_FIMGVG S5P_IRQ_VIC1(20) #define IRQ_EINT_GROUPS S5P_IRQ_VIC1(21) -#define IRQ_PMUIRQ S5P_IRQ_VIC1(23) +#define IRQ_PMU S5P_IRQ_VIC1(23) #define IRQ_HSMMC0 S5P_IRQ_VIC1(24) #define IRQ_HSMMC1 S5P_IRQ_VIC1(25) #define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */ diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h index 44011b91fbd1..6cc5cbc88ffb 100644 --- a/arch/arm/mach-s5p6440/include/mach/map.h +++ b/arch/arm/mach-s5p6440/include/mach/map.h @@ -38,7 +38,6 @@ #define S5P_PA_TIMER S5P6440_PA_TIMER #define S5P6440_PA_RTC (0xEA100000) -#define S5P_PA_RTC S5P6440_PA_RTC #define S5P6440_PA_WDT (0xEA200000) #define S5P_PA_WDT S5P6440_PA_WDT @@ -53,6 +52,7 @@ #define S5P_SZ_UART SZ_256 #define S5P6440_PA_IIC0 (0xEC104000) +#define S5P6440_PA_IIC1 (0xEC20F000) #define S5P6440_PA_SPI0 0xEC400000 #define S5P6440_PA_SPI1 0xEC500000 @@ -77,6 +77,8 @@ /* compatibiltiy defines. */ #define S3C_PA_UART S5P6440_PA_UART #define S3C_PA_IIC S5P6440_PA_IIC0 +#define S3C_PA_RTC S5P6440_PA_RTC +#define S3C_PA_IIC1 S5P6440_PA_IIC1 #define S3C_PA_WDT S5P6440_PA_WDT #define SAMSUNG_PA_ADC S5P6440_PA_ADC diff --git a/arch/arm/mach-s5p6440/include/mach/system.h b/arch/arm/mach-s5p6440/include/mach/system.h index d2dd817da66a..a359ee3fa510 100644 --- a/arch/arm/mach-s5p6440/include/mach/system.h +++ b/arch/arm/mach-s5p6440/include/mach/system.h @@ -13,12 +13,9 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H __FILE__ -static void arch_idle(void) -{ - /* nothing here yet */ -} +#include <plat/system-reset.h> -static void arch_reset(char mode, const char *cmd) +static void arch_idle(void) { /* nothing here yet */ } diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p6440/mach-smdk6440.c index 8291fecc701a..9202aaac3b56 100644 --- a/arch/arm/mach-s5p6440/mach-smdk6440.c +++ b/arch/arm/mach-s5p6440/mach-smdk6440.c @@ -15,6 +15,7 @@ #include <linux/timer.h> #include <linux/delay.h> #include <linux/init.h> +#include <linux/i2c.h> #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -37,20 +38,21 @@ #include <mach/regs-clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/iic.h> #include <plat/pll.h> #include <plat/adc.h> #include <plat/ts.h> -#define S5P6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ +#define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ S3C2410_UCON_TXIRQMODE | \ S3C2410_UCON_RXIRQMODE | \ S3C2410_UCON_RXFIFO_TOI | \ S3C2443_UCON_RXERR_IRQEN) -#define S5P6440_ULCON_DEFAULT S3C2410_LCON_CS8 +#define SMDK6440_ULCON_DEFAULT S3C2410_LCON_CS8 -#define S5P6440_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ +#define SMDK6440_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ S3C2440_UFCON_TXTRIG16 | \ S3C2410_UFCON_RXTRIG8) @@ -58,40 +60,51 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { [0] = { .hwport = 0, .flags = 0, - .ucon = S5P6440_UCON_DEFAULT, - .ulcon = S5P6440_ULCON_DEFAULT, - .ufcon = S5P6440_UFCON_DEFAULT, + .ucon = SMDK6440_UCON_DEFAULT, + .ulcon = SMDK6440_ULCON_DEFAULT, + .ufcon = SMDK6440_UFCON_DEFAULT, }, [1] = { .hwport = 1, .flags = 0, - .ucon = S5P6440_UCON_DEFAULT, - .ulcon = S5P6440_ULCON_DEFAULT, - .ufcon = S5P6440_UFCON_DEFAULT, + .ucon = SMDK6440_UCON_DEFAULT, + .ulcon = SMDK6440_ULCON_DEFAULT, + .ufcon = SMDK6440_UFCON_DEFAULT, }, [2] = { .hwport = 2, .flags = 0, - .ucon = S5P6440_UCON_DEFAULT, - .ulcon = S5P6440_ULCON_DEFAULT, - .ufcon = S5P6440_UFCON_DEFAULT, + .ucon = SMDK6440_UCON_DEFAULT, + .ulcon = SMDK6440_ULCON_DEFAULT, + .ufcon = SMDK6440_UFCON_DEFAULT, }, [3] = { .hwport = 3, .flags = 0, - .ucon = S5P6440_UCON_DEFAULT, - .ulcon = S5P6440_ULCON_DEFAULT, - .ufcon = S5P6440_UFCON_DEFAULT, + .ucon = SMDK6440_UCON_DEFAULT, + .ulcon = SMDK6440_ULCON_DEFAULT, + .ufcon = SMDK6440_UFCON_DEFAULT, }, }; static struct platform_device *smdk6440_devices[] __initdata = { &s5p6440_device_iis, &s3c_device_adc, + &s3c_device_rtc, + &s3c_device_i2c0, + &s3c_device_i2c1, &s3c_device_ts, &s3c_device_wdt, }; +static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = { + { I2C_BOARD_INFO("24c08", 0x50), }, +}; + +static struct i2c_board_info smdk6440_i2c_devs1[] __initdata = { + /* To be populated */ +}; + static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { .delay = 10000, .presc = 49, @@ -109,6 +122,14 @@ static void __init smdk6440_machine_init(void) { s3c24xx_ts_set_platdata(&s3c_ts_platform); + /* I2C */ + s3c_i2c0_set_platdata(NULL); + s3c_i2c1_set_platdata(NULL); + i2c_register_board_info(0, smdk6440_i2c_devs0, + ARRAY_SIZE(smdk6440_i2c_devs0)); + i2c_register_board_info(1, smdk6440_i2c_devs1, + ARRAY_SIZE(smdk6440_i2c_devs1)); + platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices)); } diff --git a/arch/arm/mach-s5p6440/setup-i2c0.c b/arch/arm/mach-s5p6440/setup-i2c0.c index 69e8a664aedb..2c99d14f7ac7 100644 --- a/arch/arm/mach-s5p6440/setup-i2c0.c +++ b/arch/arm/mach-s5p6440/setup-i2c0.c @@ -17,9 +17,14 @@ struct platform_device; /* don't need the contents */ +#include <linux/gpio.h> +#include <plat/gpio-cfg.h> #include <plat/iic.h> void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - /* Will be populated later */ + s3c_gpio_cfgpin(S5P6440_GPB(5), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6440_GPB(5), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5P6440_GPB(6), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6440_GPB(6), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5p6440/setup-i2c1.c b/arch/arm/mach-s5p6440/setup-i2c1.c new file mode 100644 index 000000000000..9a1537f786e0 --- /dev/null +++ b/arch/arm/mach-s5p6440/setup-i2c1.c @@ -0,0 +1,30 @@ +/* linux/arch/arm/mach-s5p6440/setup-i2c1.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * I2C1 GPIO configuration. + * + * Based on plat-s3c64xx/setup-i2c0.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/gpio.h> + +struct platform_device; /* don't need the contents */ + +#include <plat/gpio-cfg.h> +#include <plat/iic.h> + +void s3c_i2c1_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5P6440_GPR(9), S3C_GPIO_SFN(6)); + s3c_gpio_setpull(S5P6440_GPR(9), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5P6440_GPR(10), S3C_GPIO_SFN(6)); + s3c_gpio_setpull(S5P6440_GPR(10), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-s5p6442/Kconfig b/arch/arm/mach-s5p6442/Kconfig index 0fd41b447915..0fda0a5df968 100644 --- a/arch/arm/mach-s5p6442/Kconfig +++ b/arch/arm/mach-s5p6442/Kconfig @@ -19,6 +19,7 @@ config CPU_S5P6442 config MACH_SMDK6442 bool "SMDK6442" select CPU_S5P6442 + select S3C_DEV_WDT help Machine support for Samsung SMDK6442 diff --git a/arch/arm/mach-s5p6442/clock.c b/arch/arm/mach-s5p6442/clock.c index 087e57f20ad5..dcd20f17212a 100644 --- a/arch/arm/mach-s5p6442/clock.c +++ b/arch/arm/mach-s5p6442/clock.c @@ -361,6 +361,12 @@ static struct clk init_clocks[] = { .enable = s5p6442_clk_ip3_ctrl, .ctrlbit = (1<<19), }, { + .name = "watchdog", + .id = -1, + .parent = &clk_pclkd1, + .enable = s5p6442_clk_ip3_ctrl, + .ctrlbit = (1 << 22), + }, { .name = "timers", .id = -1, .parent = &clk_pclkd1, diff --git a/arch/arm/mach-s5p6442/dev-audio.c b/arch/arm/mach-s5p6442/dev-audio.c index cb801e1f5e23..7a4e34720b7b 100644 --- a/arch/arm/mach-s5p6442/dev-audio.c +++ b/arch/arm/mach-s5p6442/dev-audio.c @@ -10,11 +10,11 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <plat/gpio-cfg.h> #include <plat/audio.h> -#include <mach/gpio.h> #include <mach/map.h> #include <mach/dma.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-s5p6442/dev-spi.c b/arch/arm/mach-s5p6442/dev-spi.c index 30199525daca..e894651a88bd 100644 --- a/arch/arm/mach-s5p6442/dev-spi.c +++ b/arch/arm/mach-s5p6442/dev-spi.c @@ -10,11 +10,11 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <mach/dma.h> #include <mach/map.h> #include <mach/irqs.h> -#include <mach/gpio.h> #include <mach/spi-clocks.h> #include <plat/s3c64xx-spi.h> diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h index 02c23749c023..3fbc6c3ad2da 100644 --- a/arch/arm/mach-s5p6442/include/mach/irqs.h +++ b/arch/arm/mach-s5p6442/include/mach/irqs.h @@ -32,7 +32,7 @@ #define IRQ_GPIOINT S5P_IRQ_VIC0(30) /* VIC1 */ -#define IRQ_nPMUIRQ S5P_IRQ_VIC1(0) +#define IRQ_PMU S5P_IRQ_VIC1(0) #define IRQ_ONENAND S5P_IRQ_VIC1(7) #define IRQ_UART0 S5P_IRQ_VIC1(10) #define IRQ_UART1 S5P_IRQ_VIC1(11) diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h index 32ca424ef7f9..281d256faafb 100644 --- a/arch/arm/mach-s5p6442/include/mach/map.h +++ b/arch/arm/mach-s5p6442/include/mach/map.h @@ -42,6 +42,8 @@ #define S5P6442_PA_SYSTIMER (0xEA100000) +#define S5P6442_PA_WATCHDOG (0xEA200000) + #define S5P6442_PA_UART (0xEC000000) #define S5P_PA_UART0 (S5P6442_PA_UART + 0x0) @@ -65,6 +67,7 @@ #define S5P6442_PA_PCM1 0xF2500000 /* compatibiltiy defines. */ +#define S3C_PA_WDT S5P6442_PA_WATCHDOG #define S3C_PA_UART S5P6442_PA_UART #define S3C_PA_IIC S5P6442_PA_IIC0 diff --git a/arch/arm/mach-s5p6442/include/mach/system.h b/arch/arm/mach-s5p6442/include/mach/system.h index 8bcd8ed0c3c3..c30c1cc1b97e 100644 --- a/arch/arm/mach-s5p6442/include/mach/system.h +++ b/arch/arm/mach-s5p6442/include/mach/system.h @@ -13,12 +13,9 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H __FILE__ -static void arch_idle(void) -{ - /* nothing here yet */ -} +#include <plat/system-reset.h> -static void arch_reset(char mode, const char *cmd) +static void arch_idle(void) { /* nothing here yet */ } diff --git a/arch/arm/mach-s5p6442/mach-smdk6442.c b/arch/arm/mach-s5p6442/mach-smdk6442.c index ebcf99777259..8d8d04272f85 100644 --- a/arch/arm/mach-s5p6442/mach-smdk6442.c +++ b/arch/arm/mach-s5p6442/mach-smdk6442.c @@ -27,16 +27,16 @@ #include <plat/cpu.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ -#define S5P6442_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ +#define SMDK6442_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ S3C2410_UCON_TXIRQMODE | \ S3C2410_UCON_RXIRQMODE | \ S3C2410_UCON_RXFIFO_TOI | \ S3C2443_UCON_RXERR_IRQEN) -#define S5P6442_ULCON_DEFAULT S3C2410_LCON_CS8 +#define SMDK6442_ULCON_DEFAULT S3C2410_LCON_CS8 -#define S5P6442_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ +#define SMDK6442_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ S5PV210_UFCON_TXTRIG4 | \ S5PV210_UFCON_RXTRIG4) @@ -44,28 +44,29 @@ static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = { [0] = { .hwport = 0, .flags = 0, - .ucon = S5P6442_UCON_DEFAULT, - .ulcon = S5P6442_ULCON_DEFAULT, - .ufcon = S5P6442_UFCON_DEFAULT, + .ucon = SMDK6442_UCON_DEFAULT, + .ulcon = SMDK6442_ULCON_DEFAULT, + .ufcon = SMDK6442_UFCON_DEFAULT, }, [1] = { .hwport = 1, .flags = 0, - .ucon = S5P6442_UCON_DEFAULT, - .ulcon = S5P6442_ULCON_DEFAULT, - .ufcon = S5P6442_UFCON_DEFAULT, + .ucon = SMDK6442_UCON_DEFAULT, + .ulcon = SMDK6442_ULCON_DEFAULT, + .ufcon = SMDK6442_UFCON_DEFAULT, }, [2] = { .hwport = 2, .flags = 0, - .ucon = S5P6442_UCON_DEFAULT, - .ulcon = S5P6442_ULCON_DEFAULT, - .ufcon = S5P6442_UFCON_DEFAULT, + .ucon = SMDK6442_UCON_DEFAULT, + .ulcon = SMDK6442_ULCON_DEFAULT, + .ufcon = SMDK6442_UFCON_DEFAULT, }, }; static struct platform_device *smdk6442_devices[] __initdata = { &s5p6442_device_iis0, + &s3c_device_wdt, }; static void __init smdk6442_map_io(void) diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index b2a11dfa3399..77ae4bfb74ba 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -25,6 +25,16 @@ config S5PC100_SETUP_I2C1 help Common setup code for i2c bus 1. +config S5PC100_SETUP_IDE + bool + help + Common setup code for S5PC100 IDE GPIO configurations + +config S5PC100_SETUP_KEYPAD + bool + help + Common setup code for KEYPAD GPIO configurations. + config S5PC100_SETUP_SDHCI bool select S5PC100_SETUP_SDHCI_GPIO @@ -40,13 +50,24 @@ config MACH_SMDKC100 bool "SMDKC100" select CPU_S5PC100 select S3C_DEV_FB - select S3C_DEV_I2C1 select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 + select S3C_DEV_I2C1 + select S3C_DEV_RTC + select S3C_DEV_WDT + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_IDE + select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_TS select S5PC100_SETUP_FB_24BPP select S5PC100_SETUP_I2C1 + select S5PC100_SETUP_IDE + select S5PC100_SETUP_KEYPAD select S5PC100_SETUP_SDHCI + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 help Machine support for the Samsung SMDKC100 diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile index 543f3de5131e..a021ed1fb4b6 100644 --- a/arch/arm/mach-s5pc100/Makefile +++ b/arch/arm/mach-s5pc100/Makefile @@ -19,6 +19,8 @@ obj-$(CONFIG_CPU_S5PC100) += dma.o obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_S5PC100_SETUP_IDE) += setup-ide.o +obj-$(CONFIG_S5PC100_SETUP_KEYPAD) += setup-keypad.o obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c index e3fed4cfe7ad..084abd13b0a5 100644 --- a/arch/arm/mach-s5pc100/clock.c +++ b/arch/arm/mach-s5pc100/clock.c @@ -737,7 +737,7 @@ static struct clk init_clocks_disable[] = { .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 7), }, { - .name = "keyif", + .name = "keypad", .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_5_ctrl, @@ -1078,7 +1078,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 }, }, { .clk = { - .name = "mmc_bus", + .name = "sclk_mmc", .id = 0, .ctrlbit = (1 << 12), .enable = s5pc100_sclk1_ctrl, @@ -1089,7 +1089,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 }, }, { .clk = { - .name = "mmc_bus", + .name = "sclk_mmc", .id = 1, .ctrlbit = (1 << 13), .enable = s5pc100_sclk1_ctrl, @@ -1100,7 +1100,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 }, }, { .clk = { - .name = "mmc_bus", + .name = "sclk_mmc", .id = 2, .ctrlbit = (1 << 14), .enable = s5pc100_sclk1_ctrl, diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c index 7b5bdbc9a5df..799d22f41fcd 100644 --- a/arch/arm/mach-s5pc100/cpu.c +++ b/arch/arm/mach-s5pc100/cpu.c @@ -38,8 +38,10 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/clock.h> +#include <plat/ata-core.h> #include <plat/iic-core.h> #include <plat/sdhci.h> +#include <plat/adc-core.h> #include <plat/onenand-core.h> #include <plat/s5pc100.h> @@ -87,11 +89,14 @@ void __init s5pc100_map_io(void) s5pc100_default_sdhci1(); s5pc100_default_sdhci2(); + s3c_adc_setname("s3c64xx-adc"); + /* the i2c devices are directly compatible with s3c2440 */ s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); s3c_onenand_setname("s5pc100-onenand"); + s3c_cfcon_setname("s5pc100-pata"); } void __init s5pc100_init_clocks(int xtal) diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c index 18cfe9ae1936..a699ed6acc23 100644 --- a/arch/arm/mach-s5pc100/dev-audio.c +++ b/arch/arm/mach-s5pc100/dev-audio.c @@ -10,11 +10,11 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <plat/gpio-cfg.h> #include <plat/audio.h> -#include <mach/gpio.h> #include <mach/map.h> #include <mach/dma.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-s5pc100/dev-spi.c b/arch/arm/mach-s5pc100/dev-spi.c index 14618c346057..a0ef7c302c16 100644 --- a/arch/arm/mach-s5pc100/dev-spi.c +++ b/arch/arm/mach-s5pc100/dev-spi.c @@ -10,10 +10,10 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <mach/dma.h> #include <mach/map.h> -#include <mach/gpio.h> #include <mach/spi-clocks.h> #include <plat/s3c64xx-spi.h> diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h index 28aa551dc3a8..06513e647242 100644 --- a/arch/arm/mach-s5pc100/include/mach/irqs.h +++ b/arch/arm/mach-s5pc100/include/mach/irqs.h @@ -29,7 +29,7 @@ #define IRQ_GPIOINT S5P_IRQ_VIC0(30) /* VIC1: ARM, power, memory, connectivity */ -#define IRQ_CORTEX0 S5P_IRQ_VIC1(0) +#define IRQ_PMU S5P_IRQ_VIC1(0) #define IRQ_CORTEX1 S5P_IRQ_VIC1(1) #define IRQ_CORTEX2 S5P_IRQ_VIC1(2) #define IRQ_CORTEX3 S5P_IRQ_VIC1(3) @@ -38,7 +38,7 @@ #define IRQ_IEMIEC S5P_IRQ_VIC1(6) #define IRQ_ONENAND S5P_IRQ_VIC1(7) #define IRQ_NFC S5P_IRQ_VIC1(8) -#define IRQ_CFC S5P_IRQ_VIC1(9) +#define IRQ_CFCON S5P_IRQ_VIC1(9) #define IRQ_UART0 S5P_IRQ_VIC1(10) #define IRQ_UART1 S5P_IRQ_VIC1(11) #define IRQ_UART2 S5P_IRQ_VIC1(12) diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h index cadae4305688..01b9134feff0 100644 --- a/arch/arm/mach-s5pc100/include/mach/map.h +++ b/arch/arm/mach-s5pc100/include/mach/map.h @@ -61,6 +61,8 @@ #define S5PC100_PA_ONENAND (0xE7100000) +#define S5PC100_PA_CFCON (0xE7800000) + /* DMA */ #define S5PC100_PA_MDMA (0xE8100000) #define S5PC100_PA_PDMA0 (0xE9000000) @@ -72,6 +74,9 @@ #define S5PC100_PA_SYSTIMER (0xEA100000) +#define S5PC100_PA_WATCHDOG (0xEA200000) +#define S5PC100_PA_RTC (0xEA300000) + #define S5PC100_PA_UART (0xEC000000) #define S5P_PA_UART0 (S5PC100_PA_UART + 0x0) @@ -94,6 +99,10 @@ #define S5PC100_PA_FB (0xEE000000) +#define S5PC100_PA_FIMC0 (0xEE200000) +#define S5PC100_PA_FIMC1 (0xEE300000) +#define S5PC100_PA_FIMC2 (0xEE400000) + #define S5PC100_PA_I2S0 (0xF2000000) #define S5PC100_PA_I2S1 (0xF2100000) #define S5PC100_PA_I2S2 (0xF2200000) @@ -104,6 +113,8 @@ #define S5PC100_PA_PCM0 0xF2400000 #define S5PC100_PA_PCM1 0xF2500000 +#define S5PC100_PA_TSADC (0xF3000000) + /* KEYPAD */ #define S5PC100_PA_KEYPAD (0xF3100000) @@ -130,9 +141,19 @@ #define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1) #define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2) #define S3C_PA_KEYPAD S5PC100_PA_KEYPAD +#define S3C_PA_WDT S5PC100_PA_WATCHDOG #define S3C_PA_TSADC S5PC100_PA_TSADC #define S3C_PA_ONENAND S5PC100_PA_ONENAND #define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF #define S3C_SZ_ONENAND_BUF S5PC100_SZ_ONENAND_BUF +#define S3C_PA_RTC S5PC100_PA_RTC + +#define SAMSUNG_PA_ADC S5PC100_PA_TSADC +#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON +#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD + +#define S5P_PA_FIMC0 S5PC100_PA_FIMC0 +#define S5P_PA_FIMC1 S5PC100_PA_FIMC1 +#define S5P_PA_FIMC2 S5PC100_PA_FIMC2 #endif /* __ASM_ARCH_C100_MAP_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/regs-clock.h b/arch/arm/mach-s5pc100/include/mach/regs-clock.h index 5d27d286d504..bc92da2e0ba2 100644 --- a/arch/arm/mach-s5pc100/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pc100/include/mach/regs-clock.h @@ -71,7 +71,10 @@ #define S5P_CLKDIV1_PCLKD1_SHIFT (16) #define S5PC100_SWRESET S5PC100_REG_OTHERS(0x000) +#define S5PC100_MEM_SYS_CFG S5PC100_REG_OTHERS(0x200) #define S5PC100_SWRESET_RESETVAL 0xc100 +#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30 + #endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h index 681f626a9ae1..a9ea57c06600 100644 --- a/arch/arm/mach-s5pc100/include/mach/system.h +++ b/arch/arm/mach-s5pc100/include/mach/system.h @@ -11,18 +11,11 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H __FILE__ -#include <linux/io.h> -#include <mach/map.h> -#include <mach/regs-clock.h> +#include <plat/system-reset.h> static void arch_idle(void) { /* nothing here yet */ } -static void arch_reset(char mode, const char *cmd) -{ - __raw_writel(S5PC100_SWRESET_RESETVAL, S5PC100_SWRESET); - return; -} #endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index af22f8202a07..2dc519c172ec 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -22,6 +22,7 @@ #include <linux/i2c.h> #include <linux/fb.h> #include <linux/delay.h> +#include <linux/input.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -42,18 +43,22 @@ #include <plat/s5pc100.h> #include <plat/fb.h> #include <plat/iic.h> +#include <plat/ata.h> +#include <plat/adc.h> +#include <plat/keypad.h> +#include <plat/ts.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ -#define S5PC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ +#define SMDKC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ S3C2410_UCON_TXIRQMODE | \ S3C2410_UCON_RXIRQMODE | \ S3C2410_UCON_RXFIFO_TOI | \ S3C2443_UCON_RXERR_IRQEN) -#define S5PC100_ULCON_DEFAULT S3C2410_LCON_CS8 +#define SMDKC100_ULCON_DEFAULT S3C2410_LCON_CS8 -#define S5PC100_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ +#define SMDKC100_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ S3C2440_UFCON_RXTRIG8 | \ S3C2440_UFCON_TXTRIG16) @@ -61,30 +66,30 @@ static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = { [0] = { .hwport = 0, .flags = 0, - .ucon = S5PC100_UCON_DEFAULT, - .ulcon = S5PC100_ULCON_DEFAULT, - .ufcon = S5PC100_UFCON_DEFAULT, + .ucon = SMDKC100_UCON_DEFAULT, + .ulcon = SMDKC100_ULCON_DEFAULT, + .ufcon = SMDKC100_UFCON_DEFAULT, }, [1] = { .hwport = 1, .flags = 0, - .ucon = S5PC100_UCON_DEFAULT, - .ulcon = S5PC100_ULCON_DEFAULT, - .ufcon = S5PC100_UFCON_DEFAULT, + .ucon = SMDKC100_UCON_DEFAULT, + .ulcon = SMDKC100_ULCON_DEFAULT, + .ufcon = SMDKC100_UFCON_DEFAULT, }, [2] = { .hwport = 2, .flags = 0, - .ucon = S5PC100_UCON_DEFAULT, - .ulcon = S5PC100_ULCON_DEFAULT, - .ufcon = S5PC100_UFCON_DEFAULT, + .ucon = SMDKC100_UCON_DEFAULT, + .ulcon = SMDKC100_ULCON_DEFAULT, + .ufcon = SMDKC100_UFCON_DEFAULT, }, [3] = { .hwport = 3, .flags = 0, - .ucon = S5PC100_UCON_DEFAULT, - .ulcon = S5PC100_ULCON_DEFAULT, - .ufcon = S5PC100_UFCON_DEFAULT, + .ucon = SMDKC100_UCON_DEFAULT, + .ulcon = SMDKC100_ULCON_DEFAULT, + .ufcon = SMDKC100_UFCON_DEFAULT, }, }; @@ -149,16 +154,54 @@ static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = { .setup_gpio = s5pc100_fb_gpio_setup_24bpp, }; +static struct s3c_ide_platdata smdkc100_ide_pdata __initdata = { + .setup_gpio = s5pc100_ide_setup_gpio, +}; + +static uint32_t smdkc100_keymap[] __initdata = { + /* KEY(row, col, keycode) */ + KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3), + KEY(0, 6, KEY_4), KEY(0, 7, KEY_5), + KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C), + KEY(1, 6, KEY_D), KEY(1, 7, KEY_E) +}; + +static struct matrix_keymap_data smdkc100_keymap_data __initdata = { + .keymap = smdkc100_keymap, + .keymap_size = ARRAY_SIZE(smdkc100_keymap), +}; + +static struct samsung_keypad_platdata smdkc100_keypad_data __initdata = { + .keymap_data = &smdkc100_keymap_data, + .rows = 2, + .cols = 8, +}; + static struct platform_device *smdkc100_devices[] __initdata = { + &s3c_device_adc, + &s3c_device_cfcon, &s3c_device_i2c0, &s3c_device_i2c1, &s3c_device_fb, &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_hsmmc2, + &s3c_device_ts, + &s3c_device_wdt, &smdkc100_lcd_powerdev, &s5pc100_device_iis0, + &samsung_device_keypad, &s5pc100_device_ac97, + &s3c_device_rtc, + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, +}; + +static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 2, }; static void __init smdkc100_map_io(void) @@ -170,6 +213,8 @@ static void __init smdkc100_map_io(void) static void __init smdkc100_machine_init(void) { + s3c24xx_ts_set_platdata(&s3c_ts_platform); + /* I2C */ s3c_i2c0_set_platdata(NULL); s3c_i2c1_set_platdata(NULL); @@ -177,6 +222,9 @@ static void __init smdkc100_machine_init(void) i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); s3c_fb_set_platdata(&smdkc100_lcd_pdata); + s3c_ide_set_platdata(&smdkc100_ide_pdata); + + samsung_keypad_set_platdata(&smdkc100_keypad_data); /* LCD init */ gpio_request(S5PC100_GPD(0), "GPD"); diff --git a/arch/arm/mach-s5pc100/setup-ide.c b/arch/arm/mach-s5pc100/setup-ide.c new file mode 100644 index 000000000000..83575671fb59 --- /dev/null +++ b/arch/arm/mach-s5pc100/setup-ide.c @@ -0,0 +1,70 @@ +/* linux/arch/arm/mach-s5pc100/setup-ide.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PC100 setup information for IDE + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/io.h> + +#include <mach/regs-clock.h> +#include <plat/gpio-cfg.h> + +void s5pc100_ide_setup_gpio(void) +{ + u32 reg; + u32 gpio = 0; + + /* Independent CF interface, CF chip select configuration */ + reg = readl(S5PC100_MEM_SYS_CFG) & (~0x3f); + writel(reg | MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S5PC100_MEM_SYS_CFG); + + /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */ + for (gpio = S5PC100_GPJ0(0); gpio <= S5PC100_GPJ0(7); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + /*CF_Data[0 - 7] */ + for (gpio = S5PC100_GPJ2(0); gpio <= S5PC100_GPJ2(7); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + /* CF_Data[8 - 15] */ + for (gpio = S5PC100_GPJ3(0); gpio <= S5PC100_GPJ3(7); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */ + for (gpio = S5PC100_GPJ4(0); gpio <= S5PC100_GPJ4(3); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + /* EBI_OE, EBI_WE */ + for (gpio = S5PC100_GPK0(6); gpio <= S5PC100_GPK0(7); gpio++) + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0)); + + /* CF_OE, CF_WE */ + for (gpio = S5PC100_GPK1(6); gpio <= S5PC100_GPK1(7); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + /* CF_CD */ + s3c_gpio_cfgpin(S5PC100_GPK3(5), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PC100_GPK3(5), S3C_GPIO_PULL_NONE); +} diff --git a/arch/arm/mach-s5pc100/setup-keypad.c b/arch/arm/mach-s5pc100/setup-keypad.c new file mode 100644 index 000000000000..d0837a72a58e --- /dev/null +++ b/arch/arm/mach-s5pc100/setup-keypad.c @@ -0,0 +1,34 @@ +/* linux/arch/arm/mach-s5pc100/setup-keypad.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * GPIO configuration for S5PC100 KeyPad device + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/gpio.h> +#include <plat/gpio-cfg.h> + +void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) +{ + unsigned int gpio; + unsigned int end; + + /* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */ + end = S5PC100_GPH3(rows); + for (gpio = S5PC100_GPH3(0); gpio < end; gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + /* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */ + end = S5PC100_GPH2(cols); + for (gpio = S5PC100_GPH2(0); gpio < end; gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } +} diff --git a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c index 7769c760c9ef..dc7208c639ea 100644 --- a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c @@ -20,9 +20,11 @@ #include <plat/gpio-cfg.h> #include <plat/regs-sdhci.h> +#include <plat/sdhci.h> void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) { + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; unsigned int gpio; unsigned int end; unsigned int num; @@ -47,12 +49,15 @@ void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) } } - s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2)); + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2)); + } } void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) { + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; unsigned int gpio; unsigned int end; @@ -64,12 +69,15 @@ void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); } - s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2)); + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2)); + } } void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) { + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; unsigned int gpio; unsigned int end; @@ -81,6 +89,8 @@ void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); } - s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2)); + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2)); + } } diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c index ea7ff19adb95..f16946e456e9 100644 --- a/arch/arm/mach-s5pc100/setup-sdhci.c +++ b/arch/arm/mach-s5pc100/setup-sdhci.c @@ -26,10 +26,10 @@ /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ char *s5pc100_hsmmc_clksrcs[4] = { - [0] = "hsmmc", - [1] = "hsmmc", - /* [2] = "mmc_bus", not yet successfully used yet */ - /* [3] = "48m", - note not successfully used yet */ + [0] = "hsmmc", /* HCLK */ + /* [1] = "hsmmc", - duplicate HCLK entry */ + [2] = "sclk_mmc", /* mmc_bus */ + /* [3] = "48m", - note not successfully used yet */ }; diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 0761eac9aaea..d3a38955c741 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -27,11 +27,21 @@ config S5PV210_SETUP_I2C2 help Common setup code for i2c bus 2. +config S5PV210_SETUP_IDE + bool + help + Common setup code for S5PV210 IDE GPIO configurations + config S5PV210_SETUP_FB_24BPP bool help Common setup code for S5PV210 with an 24bpp RGB display helper. +config S5PV210_SETUP_KEYPAD + bool + help + Common setup code for keypad. + config S5PV210_SETUP_SDHCI bool select S5PV210_SETUP_SDHCI_GPIO @@ -43,14 +53,27 @@ config S5PV210_SETUP_SDHCI_GPIO help Common setup code for SDHCI gpio. -# machine support +config S5PC110_DEV_ONENAND + bool + help + Compile in platform device definition for OneNAND1 controller + +menu "S5PC110 Machines" config MACH_AQUILA - bool "Samsung Aquila" + bool "Aquila" select CPU_S5PV210 select ARCH_SPARSEMEM_ENABLE - select S5PV210_SETUP_FB_24BPP select S3C_DEV_FB + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S5PC110_DEV_ONENAND + select S5PV210_SETUP_FB_24BPP + select S5PV210_SETUP_SDHCI help Machine support for the Samsung Aquila target based on S5PC110 SoC @@ -58,34 +81,64 @@ config MACH_GONI bool "GONI" select CPU_S5PV210 select ARCH_SPARSEMEM_ENABLE + select S3C_DEV_FB + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S5PC110_DEV_ONENAND + select S5PV210_SETUP_FB_24BPP + select S5PV210_SETUP_SDHCI help Machine support for Samsung GONI board S5PC110(MCP) is one of package option of S5PV210 -config S5PC110_DEV_ONENAND - bool +config MACH_SMDKC110 + bool "SMDKC110" + select CPU_S5PV210 + select ARCH_SPARSEMEM_ENABLE + select S3C_DEV_I2C1 + select S3C_DEV_I2C2 + select S3C_DEV_RTC + select S3C_DEV_WDT + select SAMSUNG_DEV_IDE + select S5PV210_SETUP_I2C1 + select S5PV210_SETUP_I2C2 + select S5PV210_SETUP_IDE help - Compile in platform device definition for OneNAND1 controller + Machine support for Samsung SMDKC110 + S5PC110(MCP) is one of package option of S5PV210 + +endmenu + +menu "S5PV210 Machines" config MACH_SMDKV210 bool "SMDKV210" select CPU_S5PV210 select ARCH_SPARSEMEM_ENABLE + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select S3C_DEV_I2C1 + select S3C_DEV_I2C2 + select S3C_DEV_RTC + select S3C_DEV_WDT select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_IDE + select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_TS - select S3C_DEV_WDT - select HAVE_S3C2410_WATCHDOG + select S5PV210_SETUP_I2C1 + select S5PV210_SETUP_I2C2 + select S5PV210_SETUP_IDE + select S5PV210_SETUP_KEYPAD + select S5PV210_SETUP_SDHCI help Machine support for Samsung SMDKV210 -config MACH_SMDKC110 - bool "SMDKC110" - select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE - select S3C_DEV_WDT - select HAVE_S3C2410_WATCHDOG - help - Machine support for Samsung SMDKC110 - S5PC110(MCP) is one of package option of S5PV210 +endmenu endif diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 30be9a6a4620..05048c5aa4c6 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -31,5 +31,7 @@ obj-$(CONFIG_S5PC110_DEV_ONENAND) += dev-onenand.o obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o +obj-$(CONFIG_S5PV210_SETUP_IDE) += setup-ide.o +obj-$(CONFIG_S5PV210_SETUP_KEYPAD) += setup-keypad.o obj-$(CONFIG_S5PV210_SETUP_SDHCI) += setup-sdhci.o obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 411a4a9cbfc7..c7e0b8a65c4a 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -32,8 +32,13 @@ #include <plat/devs.h> #include <plat/clock.h> #include <plat/s5pv210.h> +#include <plat/adc-core.h> +#include <plat/ata-core.h> +#include <plat/fimc-core.h> #include <plat/iic-core.h> +#include <plat/keypad-core.h> #include <plat/sdhci.h> +#include <plat/reset.h> /* Initial IO mappings */ @@ -69,6 +74,11 @@ static void s5pv210_idle(void) local_irq_enable(); } +static void s5pv210_sw_reset(void) +{ + __raw_writel(0x1, S5P_SWRESET); +} + /* s5pv210_map_io * * register the standard cpu IO areas @@ -76,21 +86,29 @@ static void s5pv210_idle(void) void __init s5pv210_map_io(void) { -#ifdef CONFIG_S3C_DEV_ADC - s3c_device_adc.name = "s3c64xx-adc"; -#endif - iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc)); /* initialise device information early */ s5pv210_default_sdhci0(); s5pv210_default_sdhci1(); s5pv210_default_sdhci2(); + s5pv210_default_sdhci3(); + + s3c_adc_setname("s3c64xx-adc"); + + s3c_cfcon_setname("s5pv210-pata"); + + s3c_fimc_setname(0, "s5pv210-fimc"); + s3c_fimc_setname(1, "s5pv210-fimc"); + s3c_fimc_setname(2, "s5pv210-fimc"); /* the i2c devices are directly compatible with s3c2440 */ s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); s3c_i2c2_setname("s3c2440-i2c"); + + /* Use s5pv210-keypad instead of samsung-keypad */ + samsung_keypad_setname("s5pv210-keypad"); } void __init s5pv210_init_clocks(int xtal) @@ -138,5 +156,8 @@ int __init s5pv210_init(void) /* set idle function */ pm_idle = s5pv210_idle; + /* set sw_reset function */ + s5p_reset_hook = s5pv210_sw_reset; + return sysdev_register(&s5pv210_sysdev); } diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c index 6e215330a1be..21dc6cf955c3 100644 --- a/arch/arm/mach-s5pv210/dev-audio.c +++ b/arch/arm/mach-s5pv210/dev-audio.c @@ -10,11 +10,11 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <plat/gpio-cfg.h> #include <plat/audio.h> -#include <mach/gpio.h> #include <mach/map.h> #include <mach/dma.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-s5pv210/dev-onenand.c b/arch/arm/mach-s5pv210/dev-onenand.c index 34997b752f93..f8ede33ee82b 100644 --- a/arch/arm/mach-s5pv210/dev-onenand.c +++ b/arch/arm/mach-s5pv210/dev-onenand.c @@ -27,9 +27,14 @@ static struct resource s5pc110_onenand_resources[] = { }, [1] = { .start = S5PC110_PA_ONENAND_DMA, - .end = S5PC110_PA_ONENAND_DMA + SZ_2K - 1, + .end = S5PC110_PA_ONENAND_DMA + SZ_8K - 1, .flags = IORESOURCE_MEM, }, + [2] = { + .start = IRQ_ONENAND_AUDI, + .end = IRQ_ONENAND_AUDI, + .flags = IORESOURCE_IRQ, + }, }; struct platform_device s5pc110_device_onenand = { diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c index 337a62b57a0b..826cdbc43e20 100644 --- a/arch/arm/mach-s5pv210/dev-spi.c +++ b/arch/arm/mach-s5pv210/dev-spi.c @@ -10,11 +10,11 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <mach/dma.h> #include <mach/map.h> #include <mach/irqs.h> -#include <mach/gpio.h> #include <mach/spi-clocks.h> #include <plat/s3c64xx-spi.h> diff --git a/arch/arm/mach-s5pv210/gpiolib.c b/arch/arm/mach-s5pv210/gpiolib.c index 9ea8972e023d..0d459112d039 100644 --- a/arch/arm/mach-s5pv210/gpiolib.c +++ b/arch/arm/mach-s5pv210/gpiolib.c @@ -207,6 +207,20 @@ static struct s3c_gpio_chip s5pv210_gpio_4bit[] = { .label = "MP03", }, }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP04(0), + .ngpio = S5PV210_GPIO_MP04_NR, + .label = "MP04", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP05(0), + .ngpio = S5PV210_GPIO_MP05_NR, + .label = "MP05", + }, + }, { .base = (S5P_VA_GPIO + 0xC00), .config = &gpio_cfg_noint, .chip = { diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h index d6461ba2b71d..1f4b595534c2 100644 --- a/arch/arm/mach-s5pv210/include/mach/gpio.h +++ b/arch/arm/mach-s5pv210/include/mach/gpio.h @@ -52,6 +52,8 @@ #define S5PV210_GPIO_MP01_NR (8) #define S5PV210_GPIO_MP02_NR (4) #define S5PV210_GPIO_MP03_NR (8) +#define S5PV210_GPIO_MP04_NR (8) +#define S5PV210_GPIO_MP05_NR (8) /* GPIO bank numbers */ @@ -94,6 +96,8 @@ enum s5p_gpio_number { S5PV210_GPIO_MP01_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J4), S5PV210_GPIO_MP02_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP01), S5PV210_GPIO_MP03_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP02), + S5PV210_GPIO_MP04_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP03), + S5PV210_GPIO_MP05_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP04), }; /* S5PV210 GPIO number definitions */ @@ -127,13 +131,15 @@ enum s5p_gpio_number { #define S5PV210_MP01(_nr) (S5PV210_GPIO_MP01_START + (_nr)) #define S5PV210_MP02(_nr) (S5PV210_GPIO_MP02_START + (_nr)) #define S5PV210_MP03(_nr) (S5PV210_GPIO_MP03_START + (_nr)) +#define S5PV210_MP04(_nr) (S5PV210_GPIO_MP04_START + (_nr)) +#define S5PV210_MP05(_nr) (S5PV210_GPIO_MP05_START + (_nr)) /* the end of the S5PV210 specific gpios */ -#define S5PV210_GPIO_END (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + 1) +#define S5PV210_GPIO_END (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + 1) #define S3C_GPIO_END S5PV210_GPIO_END -/* define the number of gpios we need to the one after the MP03() range */ -#define ARCH_NR_GPIOS (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + \ +/* define the number of gpios we need to the one after the MP05() range */ +#define ARCH_NR_GPIOS (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + \ CONFIG_SAMSUNG_GPIO_EXTRA + 1) #include <asm-generic/gpio.h> diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h index 96895378ea27..e1c020e5a49b 100644 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -36,7 +36,7 @@ /* VIC1: ARM, Power, Memory, Connectivity, Storage */ -#define IRQ_CORTEX0 S5P_IRQ_VIC1(0) +#define IRQ_PMU S5P_IRQ_VIC1(0) #define IRQ_CORTEX1 S5P_IRQ_VIC1(1) #define IRQ_CORTEX2 S5P_IRQ_VIC1(2) #define IRQ_CORTEX3 S5P_IRQ_VIC1(3) @@ -45,7 +45,7 @@ #define IRQ_IEMIEC S5P_IRQ_VIC1(6) #define IRQ_ONENAND S5P_IRQ_VIC1(7) #define IRQ_NFC S5P_IRQ_VIC1(8) -#define IRQ_CFC S5P_IRQ_VIC1(9) +#define IRQ_CFCON S5P_IRQ_VIC1(9) #define IRQ_UART0 S5P_IRQ_VIC1(10) #define IRQ_UART1 S5P_IRQ_VIC1(11) #define IRQ_UART2 S5P_IRQ_VIC1(12) diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index 34eb168ec950..dd4fb6bf14b5 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -32,6 +32,8 @@ #define S5PV210_PA_SPI0 0xE1300000 #define S5PV210_PA_SPI1 0xE1400000 +#define S5PV210_PA_KEYPAD (0xE1600000) + #define S5PV210_PA_IIC0 (0xE1800000) #define S5PV210_PA_IIC1 (0xFAB00000) #define S5PV210_PA_IIC2 (0xE1A00000) @@ -43,6 +45,7 @@ #define S5PV210_PA_WATCHDOG (0xE2700000) +#define S5PV210_PA_RTC (0xE2800000) #define S5PV210_PA_UART (0xE2900000) #define S5P_PA_UART0 (S5PV210_PA_UART + 0x0) @@ -54,12 +57,18 @@ #define S5PV210_PA_SROMC (0xE8000000) +#define S5PV210_PA_CFCON (0xE8200000) + #define S5PV210_PA_MDMA 0xFA200000 #define S5PV210_PA_PDMA0 0xE0900000 #define S5PV210_PA_PDMA1 0xE0A00000 #define S5PV210_PA_FB (0xF8000000) +#define S5PV210_PA_FIMC0 (0xFB200000) +#define S5PV210_PA_FIMC1 (0xFB300000) +#define S5PV210_PA_FIMC2 (0xFB400000) + #define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) #define S5PV210_PA_VIC0 (0xF2000000) @@ -97,12 +106,19 @@ #define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0) #define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1) #define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2) +#define S3C_PA_HSMMC3 S5PV210_PA_HSMMC(3) #define S3C_PA_IIC S5PV210_PA_IIC0 #define S3C_PA_IIC1 S5PV210_PA_IIC1 #define S3C_PA_IIC2 S5PV210_PA_IIC2 #define S3C_PA_FB S5PV210_PA_FB +#define S3C_PA_RTC S5PV210_PA_RTC #define S3C_PA_WDT S5PV210_PA_WATCHDOG +#define S5P_PA_FIMC0 S5PV210_PA_FIMC0 +#define S5P_PA_FIMC1 S5PV210_PA_FIMC1 +#define S5P_PA_FIMC2 S5PV210_PA_FIMC2 #define SAMSUNG_PA_ADC S5PV210_PA_ADC +#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON +#define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h index 379117e27600..d503e0c4ce4f 100644 --- a/arch/arm/mach-s5pv210/include/mach/memory.h +++ b/arch/arm/mach-s5pv210/include/mach/memory.h @@ -16,8 +16,13 @@ #define PHYS_OFFSET UL(0x20000000) #define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M + SZ_2M) -/* Maximum of 256MiB in one bank */ -#define MAX_PHYSMEM_BITS 32 +/* + * Sparsemem support + * Physical memory can be located from 0x20000000 to 0x7fffffff, + * so MAX_PHYSMEM_BITS is 31. + */ + +#define MAX_PHYSMEM_BITS 31 #define SECTION_SIZE_BITS 28 #endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h index 2a25ab40c863..499aef737476 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h @@ -90,6 +90,8 @@ #define S5P_CLKDIV0_PCLK66_SHIFT (28) #define S5P_CLKDIV0_PCLK66_MASK (0x7 << S5P_CLKDIV0_PCLK66_SHIFT) +#define S5P_SWRESET S5P_CLKREG(0x2000) + /* Registers related to power management */ #define S5P_PWR_CFG S5P_CLKREG(0xC000) #define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0xC004) diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h index 1ca04d5025b3..af8a200b2135 100644 --- a/arch/arm/mach-s5pv210/include/mach/system.h +++ b/arch/arm/mach-s5pv210/include/mach/system.h @@ -13,12 +13,9 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H __FILE__ -static void arch_idle(void) -{ - /* nothing here yet */ -} +#include <plat/system-reset.h> -static void arch_reset(char mode, const char *cmd) +static void arch_idle(void) { /* nothing here yet */ } diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 10bc76ec4025..e41266419a3f 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -13,6 +13,12 @@ #include <linux/init.h> #include <linux/serial_core.h> #include <linux/fb.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/mfd/max8998.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -23,54 +29,63 @@ #include <mach/regs-clock.h> #include <mach/regs-fb.h> +#include <plat/gpio-cfg.h> #include <plat/regs-serial.h> #include <plat/s5pv210.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb.h> +#include <plat/fimc-core.h> +#include <plat/sdhci.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ -#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ +#define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ S3C2410_UCON_TXIRQMODE | \ S3C2410_UCON_RXIRQMODE | \ S3C2410_UCON_RXFIFO_TOI | \ S3C2443_UCON_RXERR_IRQEN) -#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8 +#define AQUILA_ULCON_DEFAULT S3C2410_LCON_CS8 -#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) +#define AQUILA_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE -static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = { +static struct s3c2410_uartcfg aquila_uartcfgs[] __initdata = { [0] = { .hwport = 0, .flags = 0, - .ucon = S5PV210_UCON_DEFAULT, - .ulcon = S5PV210_ULCON_DEFAULT, - .ufcon = S5PV210_UFCON_DEFAULT, + .ucon = AQUILA_UCON_DEFAULT, + .ulcon = AQUILA_ULCON_DEFAULT, + /* + * Actually UART0 can support 256 bytes fifo, but aquila board + * supports 128 bytes fifo because of initial chip bug + */ + .ufcon = AQUILA_UFCON_DEFAULT | + S5PV210_UFCON_TXTRIG128 | S5PV210_UFCON_RXTRIG128, }, [1] = { .hwport = 1, .flags = 0, - .ucon = S5PV210_UCON_DEFAULT, - .ulcon = S5PV210_ULCON_DEFAULT, - .ufcon = S5PV210_UFCON_DEFAULT, + .ucon = AQUILA_UCON_DEFAULT, + .ulcon = AQUILA_ULCON_DEFAULT, + .ufcon = AQUILA_UFCON_DEFAULT | + S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64, }, [2] = { .hwport = 2, .flags = 0, - .ucon = S5PV210_UCON_DEFAULT, - .ulcon = S5PV210_ULCON_DEFAULT, - .ufcon = S5PV210_UFCON_DEFAULT, + .ucon = AQUILA_UCON_DEFAULT, + .ulcon = AQUILA_ULCON_DEFAULT, + .ufcon = AQUILA_UFCON_DEFAULT | + S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16, }, [3] = { .hwport = 3, .flags = 0, - .ucon = S5PV210_UCON_DEFAULT, - .ulcon = S5PV210_ULCON_DEFAULT, - .ufcon = S5PV210_UFCON_DEFAULT, + .ucon = AQUILA_UCON_DEFAULT, + .ulcon = AQUILA_ULCON_DEFAULT, + .ufcon = AQUILA_UFCON_DEFAULT | + S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16, }, }; @@ -116,19 +131,383 @@ static struct s3c_fb_platdata aquila_lcd_pdata __initdata = { .setup_gpio = s5pv210_fb_gpio_setup_24bpp, }; +/* MAX8998 regulators */ +#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) + +static struct regulator_init_data aquila_ldo2_data = { + .constraints = { + .name = "VALIVE_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data aquila_ldo3_data = { + .constraints = { + .name = "VUSB/MIPI_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo4_data = { + .constraints = { + .name = "VDAC_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + }, +}; + +static struct regulator_init_data aquila_ldo5_data = { + .constraints = { + .name = "VTF_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + }, +}; + +static struct regulator_init_data aquila_ldo6_data = { + .constraints = { + .name = "VCC_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + }, +}; + +static struct regulator_init_data aquila_ldo7_data = { + .constraints = { + .name = "VCC_3.0V", + .min_uV = 3000000, + .max_uV = 3000000, + .apply_uV = 1, + .boot_on = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo8_data = { + .constraints = { + .name = "VUSB/VADC_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo9_data = { + .constraints = { + .name = "VCC/VCAM_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo10_data = { + .constraints = { + .name = "VPLL_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .boot_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo11_data = { + .constraints = { + .name = "CAM_IO_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo12_data = { + .constraints = { + .name = "CAM_ISP_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo13_data = { + .constraints = { + .name = "CAM_A_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo14_data = { + .constraints = { + .name = "CAM_CIF_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo15_data = { + .constraints = { + .name = "CAM_AF_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo16_data = { + .constraints = { + .name = "VMIPI_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data aquila_ldo17_data = { + .constraints = { + .name = "CAM_8M_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +/* BUCK */ +static struct regulator_consumer_supply buck1_consumer[] = { + { .supply = "vddarm", }, +}; + +static struct regulator_consumer_supply buck2_consumer[] = { + { .supply = "vddint", }, +}; + +static struct regulator_init_data aquila_buck1_data = { + .constraints = { + .name = "VARM_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(buck1_consumer), + .consumer_supplies = buck1_consumer, +}; + +static struct regulator_init_data aquila_buck2_data = { + .constraints = { + .name = "VINT_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(buck2_consumer), + .consumer_supplies = buck2_consumer, +}; + +static struct regulator_init_data aquila_buck3_data = { + .constraints = { + .name = "VCC_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data aquila_buck4_data = { + .constraints = { + .name = "CAM_CORE_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct max8998_regulator_data aquila_regulators[] = { + { MAX8998_LDO2, &aquila_ldo2_data }, + { MAX8998_LDO3, &aquila_ldo3_data }, + { MAX8998_LDO4, &aquila_ldo4_data }, + { MAX8998_LDO5, &aquila_ldo5_data }, + { MAX8998_LDO6, &aquila_ldo6_data }, + { MAX8998_LDO7, &aquila_ldo7_data }, + { MAX8998_LDO8, &aquila_ldo8_data }, + { MAX8998_LDO9, &aquila_ldo9_data }, + { MAX8998_LDO10, &aquila_ldo10_data }, + { MAX8998_LDO11, &aquila_ldo11_data }, + { MAX8998_LDO12, &aquila_ldo12_data }, + { MAX8998_LDO13, &aquila_ldo13_data }, + { MAX8998_LDO14, &aquila_ldo14_data }, + { MAX8998_LDO15, &aquila_ldo15_data }, + { MAX8998_LDO16, &aquila_ldo16_data }, + { MAX8998_LDO17, &aquila_ldo17_data }, + { MAX8998_BUCK1, &aquila_buck1_data }, + { MAX8998_BUCK2, &aquila_buck2_data }, + { MAX8998_BUCK3, &aquila_buck3_data }, + { MAX8998_BUCK4, &aquila_buck4_data }, +}; + +static struct max8998_platform_data aquila_max8998_pdata = { + .num_regulators = ARRAY_SIZE(aquila_regulators), + .regulators = aquila_regulators, +}; +#endif + +/* GPIO I2C PMIC */ +#define AP_I2C_GPIO_PMIC_BUS_4 4 +static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = { + .sda_pin = S5PV210_GPJ4(0), /* XMSMCSN */ + .scl_pin = S5PV210_GPJ4(3), /* XMSMIRQN */ +}; + +static struct platform_device aquila_i2c_gpio_pmic = { + .name = "i2c-gpio", + .id = AP_I2C_GPIO_PMIC_BUS_4, + .dev = { + .platform_data = &aquila_i2c_gpio_pmic_data, + }, +}; + +static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = { +#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) + { + /* 0xCC when SRAD = 0 */ + I2C_BOARD_INFO("max8998", 0xCC >> 1), + .platform_data = &aquila_max8998_pdata, + }, +#endif +}; + +/* PMIC Power button */ +static struct gpio_keys_button aquila_gpio_keys_table[] = { + { + .code = KEY_POWER, + .gpio = S5PV210_GPH2(6), + .desc = "gpio-keys: KEY_POWER", + .type = EV_KEY, + .active_low = 1, + .wakeup = 1, + .debounce_interval = 1, + }, +}; + +static struct gpio_keys_platform_data aquila_gpio_keys_data = { + .buttons = aquila_gpio_keys_table, + .nbuttons = ARRAY_SIZE(aquila_gpio_keys_table), +}; + +static struct platform_device aquila_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &aquila_gpio_keys_data, + }, +}; + +static void __init aquila_pmic_init(void) +{ + /* AP_PMIC_IRQ: EINT7 */ + s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP); + + /* nPower: EINT22 */ + s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP); +} + +/* MoviNAND */ +static struct s3c_sdhci_platdata aquila_hsmmc0_data __initdata = { + .max_width = 4, + .cd_type = S3C_SDHCI_CD_PERMANENT, +}; + +/* Wireless LAN */ +static struct s3c_sdhci_platdata aquila_hsmmc1_data __initdata = { + .max_width = 4, + .cd_type = S3C_SDHCI_CD_EXTERNAL, + /* ext_cd_{init,cleanup} callbacks will be added later */ +}; + +/* External Flash */ +#define AQUILA_EXT_FLASH_EN S5PV210_MP05(4) +#define AQUILA_EXT_FLASH_CD S5PV210_GPH3(4) +static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = { + .max_width = 4, + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = AQUILA_EXT_FLASH_CD, + .ext_cd_gpio_invert = 1, +}; + +static void aquila_setup_sdhci(void) +{ + gpio_request(AQUILA_EXT_FLASH_EN, "FLASH_EN"); + gpio_direction_output(AQUILA_EXT_FLASH_EN, 1); + + s3c_sdhci0_set_platdata(&aquila_hsmmc0_data); + s3c_sdhci1_set_platdata(&aquila_hsmmc1_data); + s3c_sdhci2_set_platdata(&aquila_hsmmc2_data); +}; + static struct platform_device *aquila_devices[] __initdata = { + &aquila_i2c_gpio_pmic, + &aquila_device_gpiokeys, &s3c_device_fb, + &s5pc110_device_onenand, + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, }; static void __init aquila_map_io(void) { s5p_init_io(NULL, 0, S5P_VA_CHIPID); s3c24xx_init_clocks(24000000); - s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); + s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs)); } static void __init aquila_machine_init(void) { + /* PMIC */ + aquila_pmic_init(); + i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs, + ARRAY_SIZE(i2c_gpio_pmic_devs)); + /* SDHCI */ + aquila_setup_sdhci(); + + s3c_fimc_setname(0, "s5p-fimc"); + s3c_fimc_setname(1, "s5p-fimc"); + s3c_fimc_setname(2, "s5p-fimc"); + /* FB */ s3c_fb_set_platdata(&aquila_lcd_pdata); diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 4863b13824e4..53754d7d364e 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -12,6 +12,13 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/fb.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/mfd/max8998.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -20,58 +27,444 @@ #include <mach/map.h> #include <mach/regs-clock.h> +#include <mach/regs-fb.h> +#include <plat/gpio-cfg.h> #include <plat/regs-serial.h> #include <plat/s5pv210.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/fb.h> +#include <plat/sdhci.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ -#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ +#define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ S3C2410_UCON_TXIRQMODE | \ S3C2410_UCON_RXIRQMODE | \ S3C2410_UCON_RXFIFO_TOI | \ S3C2443_UCON_RXERR_IRQEN) -#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8 +#define GONI_ULCON_DEFAULT S3C2410_LCON_CS8 -#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) +#define GONI_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = { [0] = { .hwport = 0, .flags = 0, - .ucon = S5PV210_UCON_DEFAULT, - .ulcon = S5PV210_ULCON_DEFAULT, - .ufcon = S5PV210_UFCON_DEFAULT, + .ucon = GONI_UCON_DEFAULT, + .ulcon = GONI_ULCON_DEFAULT, + .ufcon = GONI_UFCON_DEFAULT | + S5PV210_UFCON_TXTRIG256 | S5PV210_UFCON_RXTRIG256, }, [1] = { .hwport = 1, .flags = 0, - .ucon = S5PV210_UCON_DEFAULT, - .ulcon = S5PV210_ULCON_DEFAULT, - .ufcon = S5PV210_UFCON_DEFAULT, + .ucon = GONI_UCON_DEFAULT, + .ulcon = GONI_ULCON_DEFAULT, + .ufcon = GONI_UFCON_DEFAULT | + S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64, }, [2] = { .hwport = 2, .flags = 0, - .ucon = S5PV210_UCON_DEFAULT, - .ulcon = S5PV210_ULCON_DEFAULT, - .ufcon = S5PV210_UFCON_DEFAULT, + .ucon = GONI_UCON_DEFAULT, + .ulcon = GONI_ULCON_DEFAULT, + .ufcon = GONI_UFCON_DEFAULT | + S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16, }, [3] = { .hwport = 3, .flags = 0, - .ucon = S5PV210_UCON_DEFAULT, - .ulcon = S5PV210_ULCON_DEFAULT, - .ufcon = S5PV210_UFCON_DEFAULT, + .ucon = GONI_UCON_DEFAULT, + .ulcon = GONI_ULCON_DEFAULT, + .ufcon = GONI_UFCON_DEFAULT | + S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16, }, }; +/* Frame Buffer */ +static struct s3c_fb_pd_win goni_fb_win0 = { + .win_mode = { + .pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*55), + .left_margin = 16, + .right_margin = 16, + .upper_margin = 3, + .lower_margin = 28, + .hsync_len = 2, + .vsync_len = 2, + .xres = 480, + .yres = 800, + .refresh = 55, + }, + .max_bpp = 32, + .default_bpp = 16, +}; + +static struct s3c_fb_platdata goni_lcd_pdata __initdata = { + .win[0] = &goni_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | + VIDCON0_CLKSEL_LCD, + .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN + | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = s5pv210_fb_gpio_setup_24bpp, +}; + +/* MAX8998 regulators */ +#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) + +static struct regulator_init_data goni_ldo2_data = { + .constraints = { + .name = "VALIVE_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data goni_ldo3_data = { + .constraints = { + .name = "VUSB/MIPI_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data goni_ldo4_data = { + .constraints = { + .name = "VDAC_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + }, +}; + +static struct regulator_init_data goni_ldo5_data = { + .constraints = { + .name = "VTF_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + }, +}; + +static struct regulator_init_data goni_ldo6_data = { + .constraints = { + .name = "VCC_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + }, +}; + +static struct regulator_init_data goni_ldo7_data = { + .constraints = { + .name = "VLCD_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data goni_ldo8_data = { + .constraints = { + .name = "VUSB/VADC_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data goni_ldo9_data = { + .constraints = { + .name = "VCC/VCAM_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data goni_ldo10_data = { + .constraints = { + .name = "VPLL_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .boot_on = 1, + }, +}; + +static struct regulator_init_data goni_ldo11_data = { + .constraints = { + .name = "CAM_IO_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data goni_ldo12_data = { + .constraints = { + .name = "CAM_ISP_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data goni_ldo13_data = { + .constraints = { + .name = "CAM_A_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data goni_ldo14_data = { + .constraints = { + .name = "CAM_CIF_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data goni_ldo15_data = { + .constraints = { + .name = "CAM_AF_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data goni_ldo16_data = { + .constraints = { + .name = "VMIPI_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data goni_ldo17_data = { + .constraints = { + .name = "VCC_3.0V_LCD", + .min_uV = 3000000, + .max_uV = 3000000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +/* BUCK */ +static struct regulator_consumer_supply buck1_consumer[] = { + { .supply = "vddarm", }, +}; + +static struct regulator_consumer_supply buck2_consumer[] = { + { .supply = "vddint", }, +}; + +static struct regulator_init_data goni_buck1_data = { + .constraints = { + .name = "VARM_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(buck1_consumer), + .consumer_supplies = buck1_consumer, +}; + +static struct regulator_init_data goni_buck2_data = { + .constraints = { + .name = "VINT_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(buck2_consumer), + .consumer_supplies = buck2_consumer, +}; + +static struct regulator_init_data goni_buck3_data = { + .constraints = { + .name = "VCC_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data goni_buck4_data = { + .constraints = { + .name = "CAM_CORE_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct max8998_regulator_data goni_regulators[] = { + { MAX8998_LDO2, &goni_ldo2_data }, + { MAX8998_LDO3, &goni_ldo3_data }, + { MAX8998_LDO4, &goni_ldo4_data }, + { MAX8998_LDO5, &goni_ldo5_data }, + { MAX8998_LDO6, &goni_ldo6_data }, + { MAX8998_LDO7, &goni_ldo7_data }, + { MAX8998_LDO8, &goni_ldo8_data }, + { MAX8998_LDO9, &goni_ldo9_data }, + { MAX8998_LDO10, &goni_ldo10_data }, + { MAX8998_LDO11, &goni_ldo11_data }, + { MAX8998_LDO12, &goni_ldo12_data }, + { MAX8998_LDO13, &goni_ldo13_data }, + { MAX8998_LDO14, &goni_ldo14_data }, + { MAX8998_LDO15, &goni_ldo15_data }, + { MAX8998_LDO16, &goni_ldo16_data }, + { MAX8998_LDO17, &goni_ldo17_data }, + { MAX8998_BUCK1, &goni_buck1_data }, + { MAX8998_BUCK2, &goni_buck2_data }, + { MAX8998_BUCK3, &goni_buck3_data }, + { MAX8998_BUCK4, &goni_buck4_data }, +}; + +static struct max8998_platform_data goni_max8998_pdata = { + .num_regulators = ARRAY_SIZE(goni_regulators), + .regulators = goni_regulators, +}; +#endif + +/* GPIO I2C PMIC */ +#define AP_I2C_GPIO_PMIC_BUS_4 4 +static struct i2c_gpio_platform_data goni_i2c_gpio_pmic_data = { + .sda_pin = S5PV210_GPJ4(0), /* XMSMCSN */ + .scl_pin = S5PV210_GPJ4(3), /* XMSMIRQN */ +}; + +static struct platform_device goni_i2c_gpio_pmic = { + .name = "i2c-gpio", + .id = AP_I2C_GPIO_PMIC_BUS_4, + .dev = { + .platform_data = &goni_i2c_gpio_pmic_data, + }, +}; + +static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = { +#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) + { + /* 0xCC when SRAD = 0 */ + I2C_BOARD_INFO("max8998", 0xCC >> 1), + .platform_data = &goni_max8998_pdata, + }, +#endif +}; + +/* PMIC Power button */ +static struct gpio_keys_button goni_gpio_keys_table[] = { + { + .code = KEY_POWER, + .gpio = S5PV210_GPH2(6), + .desc = "gpio-keys: KEY_POWER", + .type = EV_KEY, + .active_low = 1, + .wakeup = 1, + .debounce_interval = 1, + }, +}; + +static struct gpio_keys_platform_data goni_gpio_keys_data = { + .buttons = goni_gpio_keys_table, + .nbuttons = ARRAY_SIZE(goni_gpio_keys_table), +}; + +static struct platform_device goni_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &goni_gpio_keys_data, + }, +}; + +static void __init goni_pmic_init(void) +{ + /* AP_PMIC_IRQ: EINT7 */ + s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP); + + /* nPower: EINT22 */ + s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP); +} + +/* MoviNAND */ +static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = { + .max_width = 4, + .cd_type = S3C_SDHCI_CD_PERMANENT, +}; + +/* Wireless LAN */ +static struct s3c_sdhci_platdata goni_hsmmc1_data __initdata = { + .max_width = 4, + .cd_type = S3C_SDHCI_CD_EXTERNAL, + /* ext_cd_{init,cleanup} callbacks will be added later */ +}; + +/* External Flash */ +#define GONI_EXT_FLASH_EN S5PV210_MP05(4) +#define GONI_EXT_FLASH_CD S5PV210_GPH3(4) +static struct s3c_sdhci_platdata goni_hsmmc2_data __initdata = { + .max_width = 4, + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = GONI_EXT_FLASH_CD, + .ext_cd_gpio_invert = 1, +}; + +static void goni_setup_sdhci(void) +{ + gpio_request(GONI_EXT_FLASH_EN, "FLASH_EN"); + gpio_direction_output(GONI_EXT_FLASH_EN, 1); + + s3c_sdhci0_set_platdata(&goni_hsmmc0_data); + s3c_sdhci1_set_platdata(&goni_hsmmc1_data); + s3c_sdhci2_set_platdata(&goni_hsmmc2_data); +}; + static struct platform_device *goni_devices[] __initdata = { + &s3c_device_fb, + &s5pc110_device_onenand, + &goni_i2c_gpio_pmic, + &goni_device_gpiokeys, + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, }; static void __init goni_map_io(void) @@ -83,6 +476,16 @@ static void __init goni_map_io(void) static void __init goni_machine_init(void) { + /* PMIC */ + goni_pmic_init(); + i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs, + ARRAY_SIZE(i2c_gpio_pmic_devs)); + /* SDHCI */ + goni_setup_sdhci(); + + /* FB */ + s3c_fb_set_platdata(&goni_lcd_pdata); + platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices)); } diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index 4c8903c6d104..8211bb87c54b 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -12,6 +12,7 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/i2c.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -25,18 +26,20 @@ #include <plat/s5pv210.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/ata.h> +#include <plat/iic.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ -#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ +#define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ S3C2410_UCON_TXIRQMODE | \ S3C2410_UCON_RXIRQMODE | \ S3C2410_UCON_RXFIFO_TOI | \ S3C2443_UCON_RXERR_IRQEN) -#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8 +#define SMDKC110_ULCON_DEFAULT S3C2410_LCON_CS8 -#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ +#define SMDKC110_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ S5PV210_UFCON_TXTRIG4 | \ S5PV210_UFCON_RXTRIG4) @@ -44,39 +47,60 @@ static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = { [0] = { .hwport = 0, .flags = 0, - .ucon = S5PV210_UCON_DEFAULT, - .ulcon = S5PV210_ULCON_DEFAULT, - .ufcon = S5PV210_UFCON_DEFAULT, + .ucon = SMDKC110_UCON_DEFAULT, + .ulcon = SMDKC110_ULCON_DEFAULT, + .ufcon = SMDKC110_UFCON_DEFAULT, }, [1] = { .hwport = 1, .flags = 0, - .ucon = S5PV210_UCON_DEFAULT, - .ulcon = S5PV210_ULCON_DEFAULT, - .ufcon = S5PV210_UFCON_DEFAULT, + .ucon = SMDKC110_UCON_DEFAULT, + .ulcon = SMDKC110_ULCON_DEFAULT, + .ufcon = SMDKC110_UFCON_DEFAULT, }, [2] = { .hwport = 2, .flags = 0, - .ucon = S5PV210_UCON_DEFAULT, - .ulcon = S5PV210_ULCON_DEFAULT, - .ufcon = S5PV210_UFCON_DEFAULT, + .ucon = SMDKC110_UCON_DEFAULT, + .ulcon = SMDKC110_ULCON_DEFAULT, + .ufcon = SMDKC110_UFCON_DEFAULT, }, [3] = { .hwport = 3, .flags = 0, - .ucon = S5PV210_UCON_DEFAULT, - .ulcon = S5PV210_ULCON_DEFAULT, - .ufcon = S5PV210_UFCON_DEFAULT, + .ucon = SMDKC110_UCON_DEFAULT, + .ulcon = SMDKC110_ULCON_DEFAULT, + .ufcon = SMDKC110_UFCON_DEFAULT, }, }; +static struct s3c_ide_platdata smdkc110_ide_pdata __initdata = { + .setup_gpio = s5pv210_ide_setup_gpio, +}; + static struct platform_device *smdkc110_devices[] __initdata = { &s5pv210_device_iis0, &s5pv210_device_ac97, + &s3c_device_cfcon, + &s3c_device_i2c0, + &s3c_device_i2c1, + &s3c_device_i2c2, + &s3c_device_rtc, &s3c_device_wdt, }; +static struct i2c_board_info smdkc110_i2c_devs0[] __initdata = { + { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung S524AD0XD1 */ +}; + +static struct i2c_board_info smdkc110_i2c_devs1[] __initdata = { + /* To Be Updated */ +}; + +static struct i2c_board_info smdkc110_i2c_devs2[] __initdata = { + /* To Be Updated */ +}; + static void __init smdkc110_map_io(void) { s5p_init_io(NULL, 0, S5P_VA_CHIPID); @@ -86,6 +110,18 @@ static void __init smdkc110_map_io(void) static void __init smdkc110_machine_init(void) { + s3c_i2c0_set_platdata(NULL); + s3c_i2c1_set_platdata(NULL); + s3c_i2c2_set_platdata(NULL); + i2c_register_board_info(0, smdkc110_i2c_devs0, + ARRAY_SIZE(smdkc110_i2c_devs0)); + i2c_register_board_info(1, smdkc110_i2c_devs1, + ARRAY_SIZE(smdkc110_i2c_devs1)); + i2c_register_board_info(2, smdkc110_i2c_devs2, + ARRAY_SIZE(smdkc110_i2c_devs2)); + + s3c_ide_set_platdata(&smdkc110_ide_pdata); + platform_add_devices(smdkc110_devices, ARRAY_SIZE(smdkc110_devices)); } diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 0d4627948040..fbbc0a3c3738 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/types.h> +#include <linux/i2c.h> #include <linux/init.h> #include <linux/serial_core.h> @@ -27,18 +28,21 @@ #include <plat/cpu.h> #include <plat/adc.h> #include <plat/ts.h> +#include <plat/ata.h> +#include <plat/iic.h> +#include <plat/keypad.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ -#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ +#define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ S3C2410_UCON_TXIRQMODE | \ S3C2410_UCON_RXIRQMODE | \ S3C2410_UCON_RXFIFO_TOI | \ S3C2443_UCON_RXERR_IRQEN) -#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8 +#define SMDKV210_ULCON_DEFAULT S3C2410_LCON_CS8 -#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ +#define SMDKV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ S5PV210_UFCON_TXTRIG4 | \ S5PV210_UFCON_RXTRIG4) @@ -46,41 +50,86 @@ static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = { [0] = { .hwport = 0, .flags = 0, - .ucon = S5PV210_UCON_DEFAULT, - .ulcon = S5PV210_ULCON_DEFAULT, - .ufcon = S5PV210_UFCON_DEFAULT, + .ucon = SMDKV210_UCON_DEFAULT, + .ulcon = SMDKV210_ULCON_DEFAULT, + .ufcon = SMDKV210_UFCON_DEFAULT, }, [1] = { .hwport = 1, .flags = 0, - .ucon = S5PV210_UCON_DEFAULT, - .ulcon = S5PV210_ULCON_DEFAULT, - .ufcon = S5PV210_UFCON_DEFAULT, + .ucon = SMDKV210_UCON_DEFAULT, + .ulcon = SMDKV210_ULCON_DEFAULT, + .ufcon = SMDKV210_UFCON_DEFAULT, }, [2] = { .hwport = 2, .flags = 0, - .ucon = S5PV210_UCON_DEFAULT, - .ulcon = S5PV210_ULCON_DEFAULT, - .ufcon = S5PV210_UFCON_DEFAULT, + .ucon = SMDKV210_UCON_DEFAULT, + .ulcon = SMDKV210_ULCON_DEFAULT, + .ufcon = SMDKV210_UFCON_DEFAULT, }, [3] = { .hwport = 3, .flags = 0, - .ucon = S5PV210_UCON_DEFAULT, - .ulcon = S5PV210_ULCON_DEFAULT, - .ufcon = S5PV210_UFCON_DEFAULT, + .ucon = SMDKV210_UCON_DEFAULT, + .ulcon = SMDKV210_ULCON_DEFAULT, + .ufcon = SMDKV210_UFCON_DEFAULT, }, }; +static struct s3c_ide_platdata smdkv210_ide_pdata __initdata = { + .setup_gpio = s5pv210_ide_setup_gpio, +}; + +static uint32_t smdkv210_keymap[] __initdata = { + /* KEY(row, col, keycode) */ + KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3), + KEY(0, 6, KEY_4), KEY(0, 7, KEY_5), + KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C), + KEY(1, 6, KEY_D), KEY(1, 7, KEY_E) +}; + +static struct matrix_keymap_data smdkv210_keymap_data __initdata = { + .keymap = smdkv210_keymap, + .keymap_size = ARRAY_SIZE(smdkv210_keymap), +}; + +static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = { + .keymap_data = &smdkv210_keymap_data, + .rows = 8, + .cols = 8, +}; + static struct platform_device *smdkv210_devices[] __initdata = { &s5pv210_device_iis0, &s5pv210_device_ac97, &s3c_device_adc, + &s3c_device_cfcon, + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + &s3c_device_i2c0, + &s3c_device_i2c1, + &s3c_device_i2c2, + &samsung_device_keypad, + &s3c_device_rtc, &s3c_device_ts, &s3c_device_wdt, }; +static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = { + { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung S524AD0XD1 */ +}; + +static struct i2c_board_info smdkv210_i2c_devs1[] __initdata = { + /* To Be Updated */ +}; + +static struct i2c_board_info smdkv210_i2c_devs2[] __initdata = { + /* To Be Updated */ +}; + static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { .delay = 10000, .presc = 49, @@ -96,7 +145,21 @@ static void __init smdkv210_map_io(void) static void __init smdkv210_machine_init(void) { + samsung_keypad_set_platdata(&smdkv210_keypad_data); s3c24xx_ts_set_platdata(&s3c_ts_platform); + + s3c_i2c0_set_platdata(NULL); + s3c_i2c1_set_platdata(NULL); + s3c_i2c2_set_platdata(NULL); + i2c_register_board_info(0, smdkv210_i2c_devs0, + ARRAY_SIZE(smdkv210_i2c_devs0)); + i2c_register_board_info(1, smdkv210_i2c_devs1, + ARRAY_SIZE(smdkv210_i2c_devs1)); + i2c_register_board_info(2, smdkv210_i2c_devs2, + ARRAY_SIZE(smdkv210_i2c_devs2)); + + s3c_ide_set_platdata(&smdkv210_ide_pdata); + platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices)); } diff --git a/arch/arm/mach-s5pv210/setup-fb-24bpp.c b/arch/arm/mach-s5pv210/setup-fb-24bpp.c index a50cbac8720d..928cf1f125fa 100644 --- a/arch/arm/mach-s5pv210/setup-fb-24bpp.c +++ b/arch/arm/mach-s5pv210/setup-fb-24bpp.c @@ -13,9 +13,9 @@ #include <linux/kernel.h> #include <linux/types.h> #include <linux/fb.h> +#include <linux/gpio.h> #include <mach/regs-fb.h> -#include <mach/gpio.h> #include <mach/map.h> #include <plat/fb.h> #include <mach/regs-clock.h> diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c index c718253c70b8..d38f7cb7e662 100644 --- a/arch/arm/mach-s5pv210/setup-i2c0.c +++ b/arch/arm/mach-s5pv210/setup-i2c0.c @@ -14,10 +14,10 @@ #include <linux/kernel.h> #include <linux/types.h> +#include <linux/gpio.h> struct platform_device; /* don't need the contents */ -#include <mach/gpio.h> #include <plat/iic.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s5pv210/setup-i2c1.c b/arch/arm/mach-s5pv210/setup-i2c1.c index 45e0e6ed2ed0..148bb7857d89 100644 --- a/arch/arm/mach-s5pv210/setup-i2c1.c +++ b/arch/arm/mach-s5pv210/setup-i2c1.c @@ -14,10 +14,10 @@ #include <linux/kernel.h> #include <linux/types.h> +#include <linux/gpio.h> struct platform_device; /* don't need the contents */ -#include <mach/gpio.h> #include <plat/iic.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s5pv210/setup-i2c2.c b/arch/arm/mach-s5pv210/setup-i2c2.c index b11b4bff69ac..2396cb8c373e 100644 --- a/arch/arm/mach-s5pv210/setup-i2c2.c +++ b/arch/arm/mach-s5pv210/setup-i2c2.c @@ -14,10 +14,10 @@ #include <linux/kernel.h> #include <linux/types.h> +#include <linux/gpio.h> struct platform_device; /* don't need the contents */ -#include <mach/gpio.h> #include <plat/iic.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s5pv210/setup-ide.c b/arch/arm/mach-s5pv210/setup-ide.c new file mode 100644 index 000000000000..b558b1cc8d60 --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-ide.c @@ -0,0 +1,50 @@ +/* linux/arch/arm/mach-s5pv210/setup-ide.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV210 setup information for IDE + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/gpio.h> + +#include <plat/gpio-cfg.h> + +void s5pv210_ide_setup_gpio(void) +{ + unsigned int gpio = 0; + + for (gpio = S5PV210_GPJ0(0); gpio <= S5PV210_GPJ0(7); gpio++) { + /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, + CF_DMACK */ + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + for (gpio = S5PV210_GPJ2(0); gpio <= S5PV210_GPJ2(7); gpio++) { + /*CF_Data[0 - 7] */ + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + for (gpio = S5PV210_GPJ3(0); gpio <= S5PV210_GPJ3(7); gpio++) { + /* CF_Data[8 - 15] */ + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + for (gpio = S5PV210_GPJ4(0); gpio <= S5PV210_GPJ4(3); gpio++) { + /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */ + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } +} diff --git a/arch/arm/mach-s5pv210/setup-keypad.c b/arch/arm/mach-s5pv210/setup-keypad.c new file mode 100644 index 000000000000..37b2790aafc3 --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-keypad.c @@ -0,0 +1,34 @@ +/* + * linux/arch/arm/mach-s5pv210/setup-keypad.c + * + * Copyright (C) 2010 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/gpio.h> +#include <plat/gpio-cfg.h> + +void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) +{ + unsigned int gpio, end; + + /* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */ + end = S5PV210_GPH3(rows); + for (gpio = S5PV210_GPH3(0); gpio < end; gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + /* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */ + end = S5PV210_GPH2(cols); + for (gpio = S5PV210_GPH2(0); gpio < end; gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } +} diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c index fe7d86dad14c..b18587b1ec58 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c @@ -15,15 +15,17 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/gpio.h> #include <linux/mmc/host.h> #include <linux/mmc/card.h> -#include <mach/gpio.h> #include <plat/gpio-cfg.h> #include <plat/regs-sdhci.h> +#include <plat/sdhci.h> void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) { + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; unsigned int gpio; /* Set all the necessary GPG0/GPG1 pins to special-function 2 */ @@ -48,12 +50,15 @@ void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) break; } - s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2)); + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2)); + } } void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) { + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; unsigned int gpio; /* Set all the necessary GPG1[0:1] pins to special-function 2 */ @@ -68,12 +73,15 @@ void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); } - s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2)); + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2)); + } } void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) { + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; unsigned int gpio; /* Set all the necessary GPG2[0:1] pins to special-function 2 */ @@ -99,6 +107,31 @@ void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) break; } - s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2)); + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2)); + } +} + +void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width) +{ + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; + unsigned int gpio; + + /* Set all the necessary GPG3[0:2] pins to special-function 2 */ + for (gpio = S5PV210_GPG3(0); gpio < S5PV210_GPG3(2); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + /* Data pin GPG3[3:6] to special-function 2 */ + for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + s3c_gpio_setpull(S5PV210_GPG3(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPG3(2), S3C_GPIO_SFN(2)); + } } diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c index 51815ec60c2a..c32e202731c1 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci.c +++ b/arch/arm/mach-s5pv210/setup-sdhci.c @@ -26,9 +26,9 @@ char *s5pv210_hsmmc_clksrcs[4] = { [0] = "hsmmc", /* HCLK */ - [1] = "hsmmc", /* HCLK */ + /* [1] = "hsmmc", - duplicate HCLK entry */ [2] = "sclk_mmc", /* mmc_bus */ - /*[4] = reserved */ + /* [3] = NULL, - reserved */ }; void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev, diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig new file mode 100644 index 000000000000..331b5bd97aba --- /dev/null +++ b/arch/arm/mach-s5pv310/Kconfig @@ -0,0 +1,45 @@ +# arch/arm/mach-s5pv310/Kconfig +# +# Copyright (c) 2010 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +# Configuration options for the S5PV310 + +if ARCH_S5PV310 + +config CPU_S5PV310 + bool + select PLAT_S5P + help + Enable S5PV310 CPU support + +config S5PV310_SETUP_I2C1 + bool + help + Common setup code for i2c bus 1. + +config S5PV310_SETUP_I2C2 + bool + help + Common setup code for i2c bus 2. + +# machine support + +config MACH_SMDKV310 + bool "SMDKV310" + select CPU_S5PV310 + select ARCH_SPARSEMEM_ENABLE + help + Machine support for Samsung SMDKV310 + +config MACH_UNIVERSAL_C210 + bool "Mobile UNIVERSAL_C210 Board" + select CPU_S5PV310 + select ARCH_SPARSEMEM_ENABLE + help + Machine support for Samsung Mobile Universal S5PC210 Reference + Board. S5PC210(MCP) is one of package option of S5PV310 + +endif diff --git a/arch/arm/mach-s5pv310/Makefile b/arch/arm/mach-s5pv310/Makefile new file mode 100644 index 000000000000..d5b51c72340f --- /dev/null +++ b/arch/arm/mach-s5pv310/Makefile @@ -0,0 +1,30 @@ +# arch/arm/mach-s5pv310/Makefile +# +# Copyright (c) 2010 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +# Core support for S5PV310 system + +obj-$(CONFIG_CPU_S5PV310) += cpu.o init.o clock.o irq-combiner.o +obj-$(CONFIG_CPU_S5PV310) += setup-i2c0.o time.o + +obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o + +# machine support + +obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o +obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o + +# device support + +obj-$(CONFIG_S5PV310_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_S5PV310_SETUP_I2C2) += setup-i2c2.o diff --git a/arch/arm/mach-s5pv310/Makefile.boot b/arch/arm/mach-s5pv310/Makefile.boot new file mode 100644 index 000000000000..d65956ffb43d --- /dev/null +++ b/arch/arm/mach-s5pv310/Makefile.boot @@ -0,0 +1,2 @@ + zreladdr-y := 0x40008000 +params_phys-y := 0x40000100 diff --git a/arch/arm/mach-s5pv310/clock.c b/arch/arm/mach-s5pv310/clock.c new file mode 100644 index 000000000000..77f2b4d85e6b --- /dev/null +++ b/arch/arm/mach-s5pv310/clock.c @@ -0,0 +1,544 @@ +/* linux/arch/arm/mach-s5pv310/clock.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV310 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> + +static struct clk clk_sclk_hdmi27m = { + .name = "sclk_hdmi27m", + .id = -1, + .rate = 27000000, +}; + +/* Core list of CMU_CPU side */ + +static struct clksrc_clk clk_mout_apll = { + .clk = { + .name = "mout_apll", + .id = -1, + }, + .sources = &clk_src_apll, + .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 }, + .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 }, +}; + +static struct clksrc_clk clk_mout_epll = { + .clk = { + .name = "mout_epll", + .id = -1, + }, + .sources = &clk_src_epll, + .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 }, +}; + +static struct clksrc_clk clk_mout_mpll = { + .clk = { + .name = "mout_mpll", + .id = -1, + }, + .sources = &clk_src_mpll, + .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 }, +}; + +static struct clk *clkset_moutcore_list[] = { + [0] = &clk_mout_apll.clk, + [1] = &clk_mout_mpll.clk, +}; + +static struct clksrc_sources clkset_moutcore = { + .sources = clkset_moutcore_list, + .nr_sources = ARRAY_SIZE(clkset_moutcore_list), +}; + +static struct clksrc_clk clk_moutcore = { + .clk = { + .name = "moutcore", + .id = -1, + }, + .sources = &clkset_moutcore, + .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 16, .size = 1 }, +}; + +static struct clksrc_clk clk_coreclk = { + .clk = { + .name = "core_clk", + .id = -1, + .parent = &clk_moutcore.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 0, .size = 3 }, +}; + +static struct clksrc_clk clk_armclk = { + .clk = { + .name = "armclk", + .id = -1, + .parent = &clk_coreclk.clk, + }, +}; + +static struct clksrc_clk clk_aclk_corem0 = { + .clk = { + .name = "aclk_corem0", + .id = -1, + .parent = &clk_coreclk.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 }, +}; + +static struct clksrc_clk clk_aclk_cores = { + .clk = { + .name = "aclk_cores", + .id = -1, + .parent = &clk_coreclk.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 }, +}; + +static struct clksrc_clk clk_aclk_corem1 = { + .clk = { + .name = "aclk_corem1", + .id = -1, + .parent = &clk_coreclk.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 8, .size = 3 }, +}; + +static struct clksrc_clk clk_periphclk = { + .clk = { + .name = "periphclk", + .id = -1, + .parent = &clk_coreclk.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 12, .size = 3 }, +}; + +static struct clksrc_clk clk_atclk = { + .clk = { + .name = "atclk", + .id = -1, + .parent = &clk_moutcore.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 16, .size = 3 }, +}; + +static struct clksrc_clk clk_pclk_dbg = { + .clk = { + .name = "pclk_dbg", + .id = -1, + .parent = &clk_atclk.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 20, .size = 3 }, +}; + +/* Core list of CMU_CORE side */ + +static struct clk *clkset_corebus_list[] = { + [0] = &clk_mout_mpll.clk, + [1] = &clk_mout_apll.clk, +}; + +static struct clksrc_sources clkset_mout_corebus = { + .sources = clkset_corebus_list, + .nr_sources = ARRAY_SIZE(clkset_corebus_list), +}; + +static struct clksrc_clk clk_mout_corebus = { + .clk = { + .name = "mout_corebus", + .id = -1, + }, + .sources = &clkset_mout_corebus, + .reg_src = { .reg = S5P_CLKSRC_CORE, .shift = 4, .size = 1 }, +}; + +static struct clksrc_clk clk_sclk_dmc = { + .clk = { + .name = "sclk_dmc", + .id = -1, + .parent = &clk_mout_corebus.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 12, .size = 3 }, +}; + +static struct clksrc_clk clk_aclk_cored = { + .clk = { + .name = "aclk_cored", + .id = -1, + .parent = &clk_sclk_dmc.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 16, .size = 3 }, +}; + +static struct clksrc_clk clk_aclk_corep = { + .clk = { + .name = "aclk_corep", + .id = -1, + .parent = &clk_aclk_cored.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 20, .size = 3 }, +}; + +static struct clksrc_clk clk_aclk_acp = { + .clk = { + .name = "aclk_acp", + .id = -1, + .parent = &clk_mout_corebus.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 0, .size = 3 }, +}; + +static struct clksrc_clk clk_pclk_acp = { + .clk = { + .name = "pclk_acp", + .id = -1, + .parent = &clk_aclk_acp.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 4, .size = 3 }, +}; + +/* Core list of CMU_TOP side */ + +static struct clk *clkset_aclk_top_list[] = { + [0] = &clk_mout_mpll.clk, + [1] = &clk_mout_apll.clk, +}; + +static struct clksrc_sources clkset_aclk_200 = { + .sources = clkset_aclk_top_list, + .nr_sources = ARRAY_SIZE(clkset_aclk_top_list), +}; + +static struct clksrc_clk clk_aclk_200 = { + .clk = { + .name = "aclk_200", + .id = -1, + }, + .sources = &clkset_aclk_200, + .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 12, .size = 1 }, + .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 0, .size = 3 }, +}; + +static struct clksrc_sources clkset_aclk_100 = { + .sources = clkset_aclk_top_list, + .nr_sources = ARRAY_SIZE(clkset_aclk_top_list), +}; + +static struct clksrc_clk clk_aclk_100 = { + .clk = { + .name = "aclk_100", + .id = -1, + }, + .sources = &clkset_aclk_100, + .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 16, .size = 1 }, + .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 4, .size = 4 }, +}; + +static struct clksrc_sources clkset_aclk_160 = { + .sources = clkset_aclk_top_list, + .nr_sources = ARRAY_SIZE(clkset_aclk_top_list), +}; + +static struct clksrc_clk clk_aclk_160 = { + .clk = { + .name = "aclk_160", + .id = -1, + }, + .sources = &clkset_aclk_160, + .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 20, .size = 1 }, + .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 }, +}; + +static struct clksrc_sources clkset_aclk_133 = { + .sources = clkset_aclk_top_list, + .nr_sources = ARRAY_SIZE(clkset_aclk_top_list), +}; + +static struct clksrc_clk clk_aclk_133 = { + .clk = { + .name = "aclk_133", + .id = -1, + }, + .sources = &clkset_aclk_133, + .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 24, .size = 1 }, + .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 12, .size = 3 }, +}; + +static struct clk *clkset_vpllsrc_list[] = { + [0] = &clk_fin_vpll, + [1] = &clk_sclk_hdmi27m, +}; + +static struct clksrc_sources clkset_vpllsrc = { + .sources = clkset_vpllsrc_list, + .nr_sources = ARRAY_SIZE(clkset_vpllsrc_list), +}; + +static struct clksrc_clk clk_vpllsrc = { + .clk = { + .name = "vpll_src", + .id = -1, + }, + .sources = &clkset_vpllsrc, + .reg_src = { .reg = S5P_CLKSRC_TOP1, .shift = 0, .size = 1 }, +}; + +static struct clk *clkset_sclk_vpll_list[] = { + [0] = &clk_vpllsrc.clk, + [1] = &clk_fout_vpll, +}; + +static struct clksrc_sources clkset_sclk_vpll = { + .sources = clkset_sclk_vpll_list, + .nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list), +}; + +static struct clksrc_clk clk_sclk_vpll = { + .clk = { + .name = "sclk_vpll", + .id = -1, + }, + .sources = &clkset_sclk_vpll, + .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 8, .size = 1 }, +}; + +static int s5pv310_clk_ip_peril_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_PERIL, clk, enable); +} + +static struct clk init_clocks_disable[] = { + { + .name = "timers", + .id = -1, + .parent = &clk_aclk_100.clk, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1<<24), + } +}; + +static struct clk init_clocks[] = { + /* Nothing here yet */ +}; + +static struct clk *clkset_group_list[] = { + [0] = &clk_ext_xtal_mux, + [1] = &clk_xusbxti, + [2] = &clk_sclk_hdmi27m, + [6] = &clk_mout_mpll.clk, + [7] = &clk_mout_epll.clk, + [8] = &clk_sclk_vpll.clk, +}; + +static struct clksrc_sources clkset_group = { + .sources = clkset_group_list, + .nr_sources = ARRAY_SIZE(clkset_group_list), +}; + +static struct clksrc_clk clksrcs[] = { + { + .clk = { + .name = "uclk1", + .id = 0, + .ctrlbit = (1 << 0), + .enable = s5pv310_clk_ip_peril_ctrl, + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "uclk1", + .id = 1, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 1), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "uclk1", + .id = 2, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 2), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 }, + }, { + .clk = { + .name = "uclk1", + .id = 3, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 3), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 }, + }, { + .clk = { + .name = "sclk_pwm", + .id = -1, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 24, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL3, .shift = 0, .size = 4 }, + }, +}; + +/* Clock initialization code */ +static struct clksrc_clk *sysclks[] = { + &clk_mout_apll, + &clk_mout_epll, + &clk_mout_mpll, + &clk_moutcore, + &clk_coreclk, + &clk_armclk, + &clk_aclk_corem0, + &clk_aclk_cores, + &clk_aclk_corem1, + &clk_periphclk, + &clk_atclk, + &clk_pclk_dbg, + &clk_mout_corebus, + &clk_sclk_dmc, + &clk_aclk_cored, + &clk_aclk_corep, + &clk_aclk_acp, + &clk_pclk_acp, + &clk_vpllsrc, + &clk_sclk_vpll, + &clk_aclk_200, + &clk_aclk_100, + &clk_aclk_160, + &clk_aclk_133, +}; + +void __init_or_cpufreq s5pv310_setup_clocks(void) +{ + struct clk *xtal_clk; + unsigned long apll; + unsigned long mpll; + unsigned long epll; + unsigned long vpll; + unsigned long vpllsrc; + unsigned long xtal; + unsigned long armclk; + unsigned long aclk_corem0; + unsigned long aclk_cores; + unsigned long aclk_corem1; + unsigned long periphclk; + unsigned long sclk_dmc; + unsigned long aclk_cored; + unsigned long aclk_corep; + unsigned long aclk_acp; + unsigned long pclk_acp; + unsigned int ptr; + + printk(KERN_DEBUG "%s: registering clocks\n", __func__); + + xtal_clk = clk_get(NULL, "xtal"); + BUG_ON(IS_ERR(xtal_clk)); + + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); + + apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508); + mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508); + epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0), + __raw_readl(S5P_EPLL_CON1), pll_4500); + + vpllsrc = clk_get_rate(&clk_vpllsrc.clk); + vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), + __raw_readl(S5P_VPLL_CON1), pll_4502); + + clk_fout_apll.rate = apll; + clk_fout_mpll.rate = mpll; + clk_fout_epll.rate = epll; + clk_fout_vpll.rate = vpll; + + printk(KERN_INFO "S5PV310: PLL settings, A=%ld, M=%ld, E=%ld V=%ld", + apll, mpll, epll, vpll); + + armclk = clk_get_rate(&clk_armclk.clk); + aclk_corem0 = clk_get_rate(&clk_aclk_corem0.clk); + aclk_cores = clk_get_rate(&clk_aclk_cores.clk); + aclk_corem1 = clk_get_rate(&clk_aclk_corem1.clk); + periphclk = clk_get_rate(&clk_periphclk.clk); + sclk_dmc = clk_get_rate(&clk_sclk_dmc.clk); + aclk_cored = clk_get_rate(&clk_aclk_cored.clk); + aclk_corep = clk_get_rate(&clk_aclk_corep.clk); + aclk_acp = clk_get_rate(&clk_aclk_acp.clk); + pclk_acp = clk_get_rate(&clk_pclk_acp.clk); + + printk(KERN_INFO "S5PV310: ARMCLK=%ld, COREM0=%ld, CORES=%ld\n" + "COREM1=%ld, PERI=%ld, DMC=%ld, CORED=%ld\n" + "COREP=%ld, ACLK_ACP=%ld, PCLK_ACP=%ld", + armclk, aclk_corem0, aclk_cores, aclk_corem1, + periphclk, sclk_dmc, aclk_cored, aclk_corep, + aclk_acp, pclk_acp); + + clk_f.rate = armclk; + clk_h.rate = sclk_dmc; + clk_p.rate = periphclk; + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_set_clksrc(&clksrcs[ptr], true); +} + +static struct clk *clks[] __initdata = { + /* Nothing here yet */ +}; + +void __init s5pv310_register_clocks(void) +{ + struct clk *clkp; + int ret; + int ptr; + + ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); + if (ret > 0) + printk(KERN_ERR "Failed to register %u clocks\n", ret); + + for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) + s3c_register_clksrc(sysclks[ptr], 1); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + + clkp = init_clocks_disable; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + (clkp->enable)(clkp, 0); + } + + s3c_pwmclk_init(); +} diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-s5pv310/cpu.c new file mode 100644 index 000000000000..196c9f12ed85 --- /dev/null +++ b/arch/arm/mach-s5pv310/cpu.c @@ -0,0 +1,122 @@ +/* linux/arch/arm/mach-s5pv310/cpu.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/sched.h> +#include <linux/sysdev.h> + +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/proc-fns.h> + +#include <plat/cpu.h> +#include <plat/clock.h> +#include <plat/s5pv310.h> + +#include <mach/regs-irq.h> + +void __iomem *gic_cpu_base_addr; + +extern int combiner_init(unsigned int combiner_nr, void __iomem *base, + unsigned int irq_start); +extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq); + +/* Initial IO mappings */ +static struct map_desc s5pv310_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_COREPERI_BASE, + .pfn = __phys_to_pfn(S5PV310_PA_COREPERI), + .length = SZ_8K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_COMBINER_BASE, + .pfn = __phys_to_pfn(S5PV310_PA_COMBINER), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_L2CC, + .pfn = __phys_to_pfn(S5PV310_PA_L2CC), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void s5pv310_idle(void) +{ + if (!need_resched()) + cpu_do_idle(); + + local_irq_enable(); +} + +/* s5pv310_map_io + * + * register the standard cpu IO areas +*/ +void __init s5pv310_map_io(void) +{ + iotable_init(s5pv310_iodesc, ARRAY_SIZE(s5pv310_iodesc)); +} + +void __init s5pv310_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + + s3c24xx_register_baseclocks(xtal); + s5p_register_clocks(xtal); + s5pv310_register_clocks(); + s5pv310_setup_clocks(); +} + +void __init s5pv310_init_irq(void) +{ + int irq; + + gic_cpu_base_addr = S5P_VA_GIC_CPU; + gic_dist_init(0, S5P_VA_GIC_DIST, IRQ_LOCALTIMER); + gic_cpu_init(0, S5P_VA_GIC_CPU); + + for (irq = 0; irq < MAX_COMBINER_NR; irq++) { + combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), + COMBINER_IRQ(irq, 0)); + combiner_cascade_irq(irq, IRQ_SPI(irq)); + } + + /* The parameters of s5p_init_irq() are for VIC init. + * Theses parameters should be NULL and 0 because S5PV310 + * uses GIC instead of VIC. + */ + s5p_init_irq(NULL, 0); +} + +struct sysdev_class s5pv310_sysclass = { + .name = "s5pv310-core", +}; + +static struct sys_device s5pv310_sysdev = { + .cls = &s5pv310_sysclass, +}; + +static int __init s5pv310_core_init(void) +{ + return sysdev_class_register(&s5pv310_sysclass); +} + +core_initcall(s5pv310_core_init); + +int __init s5pv310_init(void) +{ + printk(KERN_INFO "S5PV310: Initializing architecture\n"); + + /* set idle function */ + pm_idle = s5pv310_idle; + + return sysdev_register(&s5pv310_sysdev); +} diff --git a/arch/arm/mach-s5pv310/headsmp.S b/arch/arm/mach-s5pv310/headsmp.S new file mode 100644 index 000000000000..164b7b045713 --- /dev/null +++ b/arch/arm/mach-s5pv310/headsmp.S @@ -0,0 +1,41 @@ +/* + * linux/arch/arm/mach-s5pv310/headsmp.S + * + * Cloned from linux/arch/arm/mach-realview/headsmp.S + * + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> + + __INIT + +/* + * s5pv310 specific entry point for secondary CPUs. This provides + * a "holding pen" into which all secondary cores are held until we're + * ready for them to initialise. + */ +ENTRY(s5pv310_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #15 + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + add r6, r6, r4 +pen: ldr r7, [r6] + cmp r7, r0 + bne pen + + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + +1: .long . + .long pen_release diff --git a/arch/arm/mach-s5pv310/include/mach/debug-macro.S b/arch/arm/mach-s5pv310/include/mach/debug-macro.S new file mode 100644 index 000000000000..6fb3893486be --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/debug-macro.S @@ -0,0 +1,36 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/debug-macro.S + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* pull in the relevant register and map files. */ + +#include <mach/map.h> + + /* note, for the boot process to work we have to keep the UART + * virtual address aligned to an 1MiB boundary for the L1 + * mapping the head code makes. We keep the UART virtual address + * aligned and add in the offset when we load the value here. + */ + + .macro addruart, rx, tmp + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 + ldreq \rx, = S3C_PA_UART + ldrne \rx, = S3C_VA_UART +#if CONFIG_DEBUG_S3C_UART != 0 + add \rx, \rx, #(0x10000 * CONFIG_DEBUG_S3C_UART) +#endif + .endm + +#define fifo_full fifo_full_s5pv210 +#define fifo_level fifo_level_s5pv210 + +#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s5pv310/include/mach/entry-macro.S b/arch/arm/mach-s5pv310/include/mach/entry-macro.S new file mode 100644 index 000000000000..e600e1d522df --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/entry-macro.S @@ -0,0 +1,84 @@ +/* arch/arm/mach-s5pv310/include/mach/entry-macro.S + * + * Cloned from arch/arm/mach-realview/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for S5PV310 platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +#include <mach/hardware.h> +#include <asm/hardware/gic.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =gic_cpu_base_addr + ldr \base, [\base] + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + /* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Interrupts 0-15 are IPI + * 16-28 are reserved + * 29-31 are local. We allow 30 to be used for the watchdog. + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * For now, we ignore all local interrupts so only return an interrupt if it's + * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. + * + * A simple read from the controller will tell us the number of the highest + * priority enabled interrupt. We then just need to check whether it is in the + * valid range for an IRQ (30-1020 inclusive). + */ + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ + + ldr \tmp, =1021 + + bic \irqnr, \irqstat, #0x1c00 + + cmp \irqnr, #29 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + addne \irqnr, \irqnr, #32 + + .endm + + /* We assume that irqstat (the raw value of the IRQ acknowledge + * register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of interrupt on the + * controller, since this requires the original irqstat value which + * we won't easily be able to recreate later. + */ + + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + strcc \irqstat, [\base, #GIC_CPU_EOI] + cmpcs \irqnr, \irqnr + .endm + + /* As above, this assumes that irqstat and base are preserved.. */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #29 + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm diff --git a/arch/arm/mach-s5pv310/include/mach/gpio.h b/arch/arm/mach-s5pv310/include/mach/gpio.h new file mode 100644 index 000000000000..20cb80c23466 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/gpio.h @@ -0,0 +1,135 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/gpio.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV310 - GPIO lib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H __FILE__ + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +/* Practically, GPIO banks upto GPZ are the configurable gpio banks */ + +/* GPIO bank sizes */ +#define S5PV310_GPIO_A0_NR (8) +#define S5PV310_GPIO_A1_NR (6) +#define S5PV310_GPIO_B_NR (8) +#define S5PV310_GPIO_C0_NR (5) +#define S5PV310_GPIO_C1_NR (5) +#define S5PV310_GPIO_D0_NR (4) +#define S5PV310_GPIO_D1_NR (4) +#define S5PV310_GPIO_E0_NR (5) +#define S5PV310_GPIO_E1_NR (8) +#define S5PV310_GPIO_E2_NR (6) +#define S5PV310_GPIO_E3_NR (8) +#define S5PV310_GPIO_E4_NR (8) +#define S5PV310_GPIO_F0_NR (8) +#define S5PV310_GPIO_F1_NR (8) +#define S5PV310_GPIO_F2_NR (8) +#define S5PV310_GPIO_F3_NR (6) +#define S5PV310_GPIO_J0_NR (8) +#define S5PV310_GPIO_J1_NR (5) +#define S5PV310_GPIO_K0_NR (7) +#define S5PV310_GPIO_K1_NR (7) +#define S5PV310_GPIO_K2_NR (7) +#define S5PV310_GPIO_K3_NR (7) +#define S5PV310_GPIO_L0_NR (8) +#define S5PV310_GPIO_L1_NR (3) +#define S5PV310_GPIO_L2_NR (8) +#define S5PV310_GPIO_X0_NR (8) +#define S5PV310_GPIO_X1_NR (8) +#define S5PV310_GPIO_X2_NR (8) +#define S5PV310_GPIO_X3_NR (8) +#define S5PV310_GPIO_Z_NR (7) + +/* GPIO bank numbers */ + +#define S5PV310_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) + +enum s5p_gpio_number { + S5PV310_GPIO_A0_START = 0, + S5PV310_GPIO_A1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_A0), + S5PV310_GPIO_B_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_A1), + S5PV310_GPIO_C0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_B), + S5PV310_GPIO_C1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_C0), + S5PV310_GPIO_D0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_C1), + S5PV310_GPIO_D1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_D0), + S5PV310_GPIO_E0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_D1), + S5PV310_GPIO_E1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E0), + S5PV310_GPIO_E2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E1), + S5PV310_GPIO_E3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E2), + S5PV310_GPIO_E4_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E3), + S5PV310_GPIO_F0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E4), + S5PV310_GPIO_F1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F0), + S5PV310_GPIO_F2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F1), + S5PV310_GPIO_F3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F2), + S5PV310_GPIO_J0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F3), + S5PV310_GPIO_J1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_J0), + S5PV310_GPIO_K0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_J1), + S5PV310_GPIO_K1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K0), + S5PV310_GPIO_K2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K1), + S5PV310_GPIO_K3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K2), + S5PV310_GPIO_L0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K3), + S5PV310_GPIO_L1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_L0), + S5PV310_GPIO_L2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_L1), + S5PV310_GPIO_X0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_L2), + S5PV310_GPIO_X1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X0), + S5PV310_GPIO_X2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X1), + S5PV310_GPIO_X3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X2), + S5PV310_GPIO_Z_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X3), +}; + +/* S5PV310 GPIO number definitions */ +#define S5PV310_GPA0(_nr) (S5PV310_GPIO_A0_START + (_nr)) +#define S5PV310_GPA1(_nr) (S5PV310_GPIO_A1_START + (_nr)) +#define S5PV310_GPB(_nr) (S5PV310_GPIO_B_START + (_nr)) +#define S5PV310_GPC0(_nr) (S5PV310_GPIO_C0_START + (_nr)) +#define S5PV310_GPC1(_nr) (S5PV310_GPIO_C1_START + (_nr)) +#define S5PV310_GPD0(_nr) (S5PV310_GPIO_D0_START + (_nr)) +#define S5PV310_GPD1(_nr) (S5PV310_GPIO_D1_START + (_nr)) +#define S5PV310_GPE0(_nr) (S5PV310_GPIO_E0_START + (_nr)) +#define S5PV310_GPE1(_nr) (S5PV310_GPIO_E1_START + (_nr)) +#define S5PV310_GPE2(_nr) (S5PV310_GPIO_E2_START + (_nr)) +#define S5PV310_GPE3(_nr) (S5PV310_GPIO_E3_START + (_nr)) +#define S5PV310_GPE4(_nr) (S5PV310_GPIO_E4_START + (_nr)) +#define S5PV310_GPF0(_nr) (S5PV310_GPIO_F0_START + (_nr)) +#define S5PV310_GPF1(_nr) (S5PV310_GPIO_F1_START + (_nr)) +#define S5PV310_GPF2(_nr) (S5PV310_GPIO_F2_START + (_nr)) +#define S5PV310_GPF3(_nr) (S5PV310_GPIO_F3_START + (_nr)) +#define S5PV310_GPJ0(_nr) (S5PV310_GPIO_J0_START + (_nr)) +#define S5PV310_GPJ1(_nr) (S5PV310_GPIO_J1_START + (_nr)) +#define S5PV310_GPK0(_nr) (S5PV310_GPIO_K0_START + (_nr)) +#define S5PV310_GPK1(_nr) (S5PV310_GPIO_K1_START + (_nr)) +#define S5PV310_GPK2(_nr) (S5PV310_GPIO_K2_START + (_nr)) +#define S5PV310_GPK3(_nr) (S5PV310_GPIO_K3_START + (_nr)) +#define S5PV310_GPL0(_nr) (S5PV310_GPIO_L0_START + (_nr)) +#define S5PV310_GPL1(_nr) (S5PV310_GPIO_L1_START + (_nr)) +#define S5PV310_GPL2(_nr) (S5PV310_GPIO_L2_START + (_nr)) +#define S5PV310_GPX0(_nr) (S5PV310_GPIO_X0_START + (_nr)) +#define S5PV310_GPX1(_nr) (S5PV310_GPIO_X1_START + (_nr)) +#define S5PV310_GPX2(_nr) (S5PV310_GPIO_X2_START + (_nr)) +#define S5PV310_GPX3(_nr) (S5PV310_GPIO_X3_START + (_nr)) +#define S5PV310_GPZ(_nr) (S5PV310_GPIO_Z_START + (_nr)) + +/* the end of the S5PV310 specific gpios */ +#define S5PV310_GPIO_END (S5PV310_GPZ(S5PV310_GPIO_Z_NR) + 1) +#define S3C_GPIO_END S5PV310_GPIO_END + +/* define the number of gpios we need to the one after the GPZ() range */ +#define ARCH_NR_GPIOS (S5PV310_GPZ(S5PV310_GPIO_Z_NR) + \ + CONFIG_SAMSUNG_GPIO_EXTRA + 1) + +#include <asm-generic/gpio.h> + +#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/hardware.h b/arch/arm/mach-s5pv310/include/mach/hardware.h new file mode 100644 index 000000000000..28ff9881f1a6 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/hardware.h @@ -0,0 +1,18 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/hardware.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV310 - Hardware support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H __FILE__ + +/* currently nothing here, placeholder */ + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/io.h b/arch/arm/mach-s5pv310/include/mach/io.h new file mode 100644 index 000000000000..8a7f9128391f --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/io.h @@ -0,0 +1,26 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/io.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org> + * + * Based on arch/arm/mach-s5p6442/include/mach/io.h + * + * Default IO routines for S5PV310 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H __FILE__ + +/* No current ISA/PCI bus support. */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#define IO_SPACE_LIMIT (0xFFFFFFFF) + +#endif /* __ASM_ARM_ARCH_IO_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/irqs.h b/arch/arm/mach-s5pv310/include/mach/irqs.h new file mode 100644 index 000000000000..56885ca3773c --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/irqs.h @@ -0,0 +1,74 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/irqs.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - IRQ definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H __FILE__ + +#include <plat/irqs.h> + +/* Private Peripheral Interrupt */ +#define IRQ_PPI(x) S5P_IRQ(x+16) + +#define IRQ_LOCALTIMER IRQ_PPI(13) + +/* Shared Peripheral Interrupt */ +#define IRQ_SPI(x) S5P_IRQ(x+32) + +#define IRQ_EINT0 IRQ_SPI(40) +#define IRQ_EINT1 IRQ_SPI(41) +#define IRQ_EINT2 IRQ_SPI(42) +#define IRQ_EINT3 IRQ_SPI(43) +#define IRQ_USB_HSOTG IRQ_SPI(44) +#define IRQ_USB_HOST IRQ_SPI(45) +#define IRQ_MODEM_IF IRQ_SPI(46) +#define IRQ_ROTATOR IRQ_SPI(47) +#define IRQ_JPEG IRQ_SPI(48) +#define IRQ_2D IRQ_SPI(49) +#define IRQ_PCIE IRQ_SPI(50) +#define IRQ_SYSTEM_TIMER IRQ_SPI(51) +#define IRQ_MFC IRQ_SPI(52) +#define IRQ_WTD IRQ_SPI(53) +#define IRQ_AUDIO_SS IRQ_SPI(54) +#define IRQ_AC97 IRQ_SPI(55) +#define IRQ_SPDIF IRQ_SPI(56) +#define IRQ_KEYPAD IRQ_SPI(57) +#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(58) +#define IRQ_SLIMBUS IRQ_SPI(59) +#define IRQ_PMU IRQ_SPI(60) +#define IRQ_TSI IRQ_SPI(61) +#define IRQ_SATA IRQ_SPI(62) +#define IRQ_GPS IRQ_SPI(63) + +#define MAX_IRQ_IN_COMBINER 8 +#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(64)) +#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y) + +#define IRQ_TIMER0_VIC COMBINER_IRQ(22, 0) +#define IRQ_TIMER1_VIC COMBINER_IRQ(22, 1) +#define IRQ_TIMER2_VIC COMBINER_IRQ(22, 2) +#define IRQ_TIMER3_VIC COMBINER_IRQ(22, 3) +#define IRQ_TIMER4_VIC COMBINER_IRQ(22, 4) + +#define IRQ_UART0 COMBINER_IRQ(26, 0) +#define IRQ_UART1 COMBINER_IRQ(26, 1) +#define IRQ_UART2 COMBINER_IRQ(26, 2) +#define IRQ_UART3 COMBINER_IRQ(26, 3) +#define IRQ_UART4 COMBINER_IRQ(26, 4) + +#define IRQ_IIC COMBINER_IRQ(27, 0) + +/* Set the default NR_IRQS */ +#define NR_IRQS COMBINER_IRQ(MAX_COMBINER_NR, 0) + +#define MAX_COMBINER_NR 39 + +#endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h new file mode 100644 index 000000000000..87697c9fca5b --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/map.h @@ -0,0 +1,69 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/map.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV310 - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MAP_H +#define __ASM_ARCH_MAP_H __FILE__ + +#include <plat/map-base.h> + +/* + * S5PV310 UART offset is 0x10000 but the older S5P SoCs are 0x400. + * So need to define it, and here is to avoid redefinition warning. + */ +#define S3C_UART_OFFSET (0x10000) + +#include <plat/map-s5p.h> + +#define S5PV310_PA_CHIPID (0x10000000) +#define S5P_PA_CHIPID S5PV310_PA_CHIPID + +#define S5PV310_PA_SYSCON (0x10020000) +#define S5P_PA_SYSCON S5PV310_PA_SYSCON + +#define S5PV310_PA_WATCHDOG (0x10060000) + +#define S5PV310_PA_COMBINER (0x10448000) + +#define S5PV310_PA_COREPERI (0x10500000) +#define S5PV310_PA_GIC_CPU (0x10500100) +#define S5PV310_PA_TWD (0x10500600) +#define S5PV310_PA_GIC_DIST (0x10501000) +#define S5PV310_PA_L2CC (0x10502000) + +#define S5PV310_PA_GPIO (0x11000000) +#define S5P_PA_GPIO S5PV310_PA_GPIO + +#define S5PV310_PA_UART (0x13800000) + +#define S5P_PA_UART(x) (S5PV310_PA_UART + ((x) * S3C_UART_OFFSET)) +#define S5P_PA_UART0 S5P_PA_UART(0) +#define S5P_PA_UART1 S5P_PA_UART(1) +#define S5P_PA_UART2 S5P_PA_UART(2) +#define S5P_PA_UART3 S5P_PA_UART(3) +#define S5P_PA_UART4 S5P_PA_UART(4) + +#define S5P_SZ_UART SZ_256 + +#define S5PV310_PA_IIC0 (0x13860000) + +#define S5PV310_PA_TIMER (0x139D0000) +#define S5P_PA_TIMER S5PV310_PA_TIMER + +#define S5PV310_PA_SDRAM (0x40000000) +#define S5P_PA_SDRAM S5PV310_PA_SDRAM + +/* compatibiltiy defines. */ +#define S3C_PA_UART S5PV310_PA_UART +#define S3C_PA_IIC S5PV310_PA_IIC0 +#define S3C_PA_WDT S5PV310_PA_WATCHDOG + +#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/memory.h b/arch/arm/mach-s5pv310/include/mach/memory.h new file mode 100644 index 000000000000..1dffb4823245 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/memory.h @@ -0,0 +1,22 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/memory.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV310 - Memory definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H __FILE__ + +#define PHYS_OFFSET UL(0x40000000) + +/* Maximum of 256MiB in one bank */ +#define MAX_PHYSMEM_BITS 32 +#define SECTION_SIZE_BITS 28 + +#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/pwm-clock.h b/arch/arm/mach-s5pv310/include/mach/pwm-clock.h new file mode 100644 index 000000000000..7e6da2701088 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/pwm-clock.h @@ -0,0 +1,70 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/pwm-clock.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h + * + * S5PV310 - pwm clock and timer support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_PWMCLK_H +#define __ASM_ARCH_PWMCLK_H __FILE__ + +/** + * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk + * @tcfg: The timer TCFG1 register bits shifted down to 0. + * + * Return true if the given configuration from TCFG1 is a TCLK instead + * any of the TDIV clocks. + */ +static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) +{ + return tcfg == S3C64XX_TCFG1_MUX_TCLK; +} + +/** + * tcfg_to_divisor() - convert tcfg1 setting to a divisor + * @tcfg1: The tcfg1 setting, shifted down. + * + * Get the divisor value for the given tcfg1 setting. We assume the + * caller has already checked to see if this is not a TCLK source. + */ +static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) +{ + return 1 << tcfg1; +} + +/** + * pwm_tdiv_has_div1() - does the tdiv setting have a /1 + * + * Return true if we have a /1 in the tdiv setting. + */ +static inline unsigned int pwm_tdiv_has_div1(void) +{ + return 1; +} + +/** + * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. + * @div: The divisor to calculate the bit information for. + * + * Turn a divisor into the necessary bit field for TCFG1. + */ +static inline unsigned long pwm_tdiv_div_bits(unsigned int div) +{ + return ilog2(div); +} + +#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK + +#endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-clock.h b/arch/arm/mach-s5pv310/include/mach/regs-clock.h new file mode 100644 index 000000000000..59e3a7e94d80 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/regs-clock.h @@ -0,0 +1,62 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/regs-clock.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV310 - Clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_CLOCK_H +#define __ASM_ARCH_REGS_CLOCK_H __FILE__ + +#include <mach/map.h> + +#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) + +#define S5P_INFORM0 S5P_CLKREG(0x800) + +#define S5P_EPLL_CON0 S5P_CLKREG(0x1C110) +#define S5P_EPLL_CON1 S5P_CLKREG(0x1C114) +#define S5P_VPLL_CON0 S5P_CLKREG(0x1C120) +#define S5P_VPLL_CON1 S5P_CLKREG(0x1C124) + +#define S5P_CLKSRC_TOP0 S5P_CLKREG(0x1C210) +#define S5P_CLKSRC_TOP1 S5P_CLKREG(0x1C214) + +#define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x1C250) + +#define S5P_CLKDIV_TOP S5P_CLKREG(0x1C510) + +#define S5P_CLKDIV_PERIL0 S5P_CLKREG(0x1C550) +#define S5P_CLKDIV_PERIL1 S5P_CLKREG(0x1C554) +#define S5P_CLKDIV_PERIL2 S5P_CLKREG(0x1C558) +#define S5P_CLKDIV_PERIL3 S5P_CLKREG(0x1C55C) +#define S5P_CLKDIV_PERIL4 S5P_CLKREG(0x1C560) +#define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x1C564) + +#define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x1C950) + +#define S5P_CLKSRC_CORE S5P_CLKREG(0x20200) + +#define S5P_CLKDIV_CORE0 S5P_CLKREG(0x20500) + +#define S5P_APLL_LOCK S5P_CLKREG(0x24000) +#define S5P_MPLL_LOCK S5P_CLKREG(0x24004) +#define S5P_APLL_CON0 S5P_CLKREG(0x24100) +#define S5P_APLL_CON1 S5P_CLKREG(0x24104) +#define S5P_MPLL_CON0 S5P_CLKREG(0x24108) +#define S5P_MPLL_CON1 S5P_CLKREG(0x2410C) + +#define S5P_CLKSRC_CPU S5P_CLKREG(0x24200) +#define S5P_CLKMUX_STATCPU S5P_CLKREG(0x24400) + +#define S5P_CLKDIV_CPU S5P_CLKREG(0x24500) +#define S5P_CLKDIV_STATCPU S5P_CLKREG(0x24600) + +#define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x24800) + +#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-irq.h b/arch/arm/mach-s5pv310/include/mach/regs-irq.h new file mode 100644 index 000000000000..c6e09c7f9161 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/regs-irq.h @@ -0,0 +1,19 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/regs-irq.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV310 - IRQ register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_IRQ_H +#define __ASM_ARCH_REGS_IRQ_H __FILE__ + +#include <asm/hardware/gic.h> +#include <mach/map.h> + +#endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/smp.h b/arch/arm/mach-s5pv310/include/mach/smp.h new file mode 100644 index 000000000000..990f3ba88a1f --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/smp.h @@ -0,0 +1,29 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/smp.h + * + * Cloned from arch/arm/mach-realview/include/mach/smp.h +*/ + +#ifndef ASM_ARCH_SMP_H +#define ASM_ARCH_SMP_H __FILE__ + +#include <asm/hardware/gic.h> + +extern void __iomem *gic_cpu_base_addr; + +#define hard_smp_processor_id() \ + ({ \ + unsigned int cpunum; \ + __asm__("mrc p15, 0, %0, c0, c0, 5" \ + : "=r" (cpunum)); \ + cpunum &= 0x03; \ + }) + +/* + * We use IRQ1 as the IPI + */ +static inline void smp_cross_call(const struct cpumask *mask) +{ + gic_raise_softirq(mask, 1); +} + +#endif diff --git a/arch/arm/mach-s5pv310/include/mach/system.h b/arch/arm/mach-s5pv310/include/mach/system.h new file mode 100644 index 000000000000..d10c009cf0f1 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/system.h @@ -0,0 +1,22 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/system.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV310 - system support header + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H __FILE__ + +#include <plat/system-reset.h> + +static void arch_idle(void) +{ + /* nothing here yet */ +} +#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/timex.h b/arch/arm/mach-s5pv310/include/mach/timex.h new file mode 100644 index 000000000000..bd2359b952b4 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/timex.h @@ -0,0 +1,29 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/timex.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Copyright (c) 2003-2010 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Based on arch/arm/mach-s5p6442/include/mach/timex.h + * + * S5PV310 - time parameters + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H __FILE__ + +/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it + * a variable is useless. It seems as long as we make our timers an + * exact multiple of HZ, any value that makes a 1->1 correspondence + * for the time conversion functions to/from jiffies is acceptable. +*/ + +#define CLOCK_TICK_RATE 12000000 + +#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/uncompress.h b/arch/arm/mach-s5pv310/include/mach/uncompress.h new file mode 100644 index 000000000000..59593c1e2416 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/uncompress.h @@ -0,0 +1,30 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/uncompress.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV310 - uncompress code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H __FILE__ + +#include <mach/map.h> +#include <plat/uncompress.h> + +static void arch_detect_cpu(void) +{ + /* we do not need to do any cpu detection here at the moment. */ + + /* + * For preventing FIFO overrun or infinite loop of UART console, + * fifo_max should be the minimum fifo size of all of the UART channels + */ + fifo_mask = S5PV210_UFSTAT_TXMASK; + fifo_max = 15 << S5PV210_UFSTAT_TXSHIFT; +} +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/vmalloc.h b/arch/arm/mach-s5pv310/include/mach/vmalloc.h new file mode 100644 index 000000000000..3f565ebb7daa --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/vmalloc.h @@ -0,0 +1,22 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/vmalloc.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Copyright 2010 Ben Dooks <ben-linux@fluff.org> + * + * Based on arch/arm/mach-s5p6440/include/mach/vmalloc.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S5PV310 vmalloc definition +*/ + +#ifndef __ASM_ARCH_VMALLOC_H +#define __ASM_ARCH_VMALLOC_H __FILE__ + +#define VMALLOC_END (0xF0000000) + +#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5pv310/init.c b/arch/arm/mach-s5pv310/init.c new file mode 100644 index 000000000000..182dcf42cfb4 --- /dev/null +++ b/arch/arm/mach-s5pv310/init.c @@ -0,0 +1,41 @@ +/* linux/arch/arm/mach-s5pv310/init.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/serial_core.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/regs-serial.h> + +static struct s3c24xx_uart_clksrc s5pv310_serial_clocks[] = { + [0] = { + .name = "uclk1", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, +}; + +/* uart registration process */ +void __init s5pv310_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + struct s3c2410_uartcfg *tcfg = cfg; + u32 ucnt; + + for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { + if (!tcfg->clocks) { + tcfg->has_fracval = 1; + tcfg->clocks = s5pv310_serial_clocks; + tcfg->clocks_size = ARRAY_SIZE(s5pv310_serial_clocks); + } + } + + s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); +} diff --git a/arch/arm/mach-s5pv310/irq-combiner.c b/arch/arm/mach-s5pv310/irq-combiner.c new file mode 100644 index 000000000000..0f7052164f23 --- /dev/null +++ b/arch/arm/mach-s5pv310/irq-combiner.c @@ -0,0 +1,125 @@ +/* linux/arch/arm/mach-s5pv310/irq-combiner.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Based on arch/arm/common/gic.c + * + * IRQ COMBINER support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/io.h> + +#include <asm/mach/irq.h> + +#define COMBINER_ENABLE_SET 0x0 +#define COMBINER_ENABLE_CLEAR 0x4 +#define COMBINER_INT_STATUS 0xC + +static DEFINE_SPINLOCK(irq_controller_lock); + +struct combiner_chip_data { + unsigned int irq_offset; + void __iomem *base; +}; + +static struct combiner_chip_data combiner_data[MAX_COMBINER_NR]; + +static inline void __iomem *combiner_base(unsigned int irq) +{ + struct combiner_chip_data *combiner_data = get_irq_chip_data(irq); + return combiner_data->base; +} + +static void combiner_mask_irq(unsigned int irq) +{ + u32 mask = 1 << (irq % 32); + + __raw_writel(mask, combiner_base(irq) + COMBINER_ENABLE_CLEAR); +} + +static void combiner_unmask_irq(unsigned int irq) +{ + u32 mask = 1 << (irq % 32); + + __raw_writel(mask, combiner_base(irq) + COMBINER_ENABLE_SET); +} + +static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) +{ + struct combiner_chip_data *chip_data = get_irq_data(irq); + struct irq_chip *chip = get_irq_chip(irq); + unsigned int cascade_irq, combiner_irq; + unsigned long status; + + /* primary controller ack'ing */ + chip->ack(irq); + + spin_lock(&irq_controller_lock); + status = __raw_readl(chip_data->base + COMBINER_INT_STATUS); + spin_unlock(&irq_controller_lock); + + if (status == 0) + goto out; + + for (combiner_irq = 0; combiner_irq < 32; combiner_irq++) { + if (status & 0x1) + break; + status >>= 1; + } + + cascade_irq = combiner_irq + (chip_data->irq_offset & ~31); + if (unlikely(cascade_irq >= NR_IRQS)) + do_bad_IRQ(cascade_irq, desc); + else + generic_handle_irq(cascade_irq); + + out: + /* primary controller unmasking */ + chip->unmask(irq); +} + +static struct irq_chip combiner_chip = { + .name = "COMBINER", + .mask = combiner_mask_irq, + .unmask = combiner_unmask_irq, +}; + +void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq) +{ + if (combiner_nr >= MAX_COMBINER_NR) + BUG(); + if (set_irq_data(irq, &combiner_data[combiner_nr]) != 0) + BUG(); + set_irq_chained_handler(irq, combiner_handle_cascade_irq); +} + +void __init combiner_init(unsigned int combiner_nr, void __iomem *base, + unsigned int irq_start) +{ + unsigned int i; + + if (combiner_nr >= MAX_COMBINER_NR) + BUG(); + + combiner_data[combiner_nr].base = base; + combiner_data[combiner_nr].irq_offset = irq_start; + + /* Disable all interrupts */ + + __raw_writel(0xffffffff, base + COMBINER_ENABLE_CLEAR); + + /* Setup the Linux IRQ subsystem */ + + for (i = irq_start; i < combiner_data[combiner_nr].irq_offset + + MAX_IRQ_IN_COMBINER; i++) { + set_irq_chip(i, &combiner_chip); + set_irq_chip_data(i, &combiner_data[combiner_nr]); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + } +} diff --git a/arch/arm/mach-s5pv310/localtimer.c b/arch/arm/mach-s5pv310/localtimer.c new file mode 100644 index 000000000000..2784036cd8b1 --- /dev/null +++ b/arch/arm/mach-s5pv310/localtimer.c @@ -0,0 +1,25 @@ +/* linux/arch/arm/mach-s5pv310/localtimer.c + * + * Cloned from linux/arch/arm/mach-realview/localtimer.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/clockchips.h> + +#include <asm/irq.h> +#include <asm/localtimer.h> + +/* + * Setup the local clock events for a CPU. + */ +void __cpuinit local_timer_setup(struct clock_event_device *evt) +{ + evt->irq = IRQ_LOCALTIMER; + twd_timer_setup(evt); +} diff --git a/arch/arm/mach-s5pv310/mach-smdkv310.c b/arch/arm/mach-s5pv310/mach-smdkv310.c new file mode 100644 index 000000000000..0d6ab77709d2 --- /dev/null +++ b/arch/arm/mach-s5pv310/mach-smdkv310.c @@ -0,0 +1,92 @@ +/* linux/arch/arm/mach-s5pv310/mach-smdkv310.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> +#include <asm/hardware/cache-l2x0.h> + +#include <plat/regs-serial.h> +#include <plat/s5pv310.h> +#include <plat/cpu.h> + +#include <mach/map.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define SMDKV310_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define SMDKV310_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = SMDKV310_UCON_DEFAULT, + .ulcon = SMDKV310_ULCON_DEFAULT, + .ufcon = SMDKV310_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = SMDKV310_UCON_DEFAULT, + .ulcon = SMDKV310_ULCON_DEFAULT, + .ufcon = SMDKV310_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = SMDKV310_UCON_DEFAULT, + .ulcon = SMDKV310_ULCON_DEFAULT, + .ufcon = SMDKV310_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = SMDKV310_UCON_DEFAULT, + .ulcon = SMDKV310_ULCON_DEFAULT, + .ufcon = SMDKV310_UFCON_DEFAULT, + }, +}; + +static void __init smdkv310_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs)); +} + +static void __init smdkv310_machine_init(void) +{ +#ifdef CONFIG_CACHE_L2X0 + l2x0_init(S5P_VA_L2CC, 1 << 28, 0xffffffff); +#endif +} + +MACHINE_START(SMDKV310, "SMDKV310") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */ + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = s5pv310_init_irq, + .map_io = smdkv310_map_io, + .init_machine = smdkv310_machine_init, + .timer = &s5pv310_timer, +MACHINE_END diff --git a/arch/arm/mach-s5pv310/mach-universal_c210.c b/arch/arm/mach-s5pv310/mach-universal_c210.c new file mode 100644 index 000000000000..2388cb947936 --- /dev/null +++ b/arch/arm/mach-s5pv310/mach-universal_c210.c @@ -0,0 +1,86 @@ +/* linux/arch/arm/mach-s5pv310/mach-universal_c210.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> +#include <asm/hardware/cache-l2x0.h> + +#include <plat/regs-serial.h> +#include <plat/s5pv310.h> +#include <plat/cpu.h> + +#include <mach/map.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define UNIVERSAL_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define UNIVERSAL_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG256 | \ + S5PV210_UFCON_RXTRIG256) + +static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .ucon = UNIVERSAL_UCON_DEFAULT, + .ulcon = UNIVERSAL_ULCON_DEFAULT, + .ufcon = UNIVERSAL_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .ucon = UNIVERSAL_UCON_DEFAULT, + .ulcon = UNIVERSAL_ULCON_DEFAULT, + .ufcon = UNIVERSAL_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .ucon = UNIVERSAL_UCON_DEFAULT, + .ulcon = UNIVERSAL_ULCON_DEFAULT, + .ufcon = UNIVERSAL_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .ucon = UNIVERSAL_UCON_DEFAULT, + .ulcon = UNIVERSAL_ULCON_DEFAULT, + .ufcon = UNIVERSAL_UFCON_DEFAULT, + }, +}; + +static void __init universal_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); +} + +static void __init universal_machine_init(void) +{ +#ifdef CONFIG_CACHE_L2X0 + l2x0_init(S5P_VA_L2CC, 1 << 28, 0xffffffff); +#endif +} + +MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") + /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = s5pv310_init_irq, + .map_io = universal_map_io, + .init_machine = universal_machine_init, + .timer = &s5pv310_timer, +MACHINE_END diff --git a/arch/arm/mach-s5pv310/platsmp.c b/arch/arm/mach-s5pv310/platsmp.c new file mode 100644 index 000000000000..fe9469abd006 --- /dev/null +++ b/arch/arm/mach-s5pv310/platsmp.c @@ -0,0 +1,192 @@ +/* linux/arch/arm/mach-s5pv310/platsmp.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Cloned from linux/arch/arm/mach-vexpress/platsmp.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/jiffies.h> +#include <linux/smp.h> +#include <linux/io.h> + +#include <asm/cacheflush.h> +#include <asm/localtimer.h> +#include <asm/smp_scu.h> +#include <asm/unified.h> + +#include <mach/hardware.h> +#include <mach/regs-clock.h> + +extern void s5pv310_secondary_startup(void); + +/* + * control for which core is the next to come out of the secondary + * boot "holding pen" + */ + +volatile int __cpuinitdata pen_release = -1; + +static void __iomem *scu_base_addr(void) +{ + return (void __iomem *)(S5P_VA_SCU); +} + +static DEFINE_SPINLOCK(boot_lock); + +void __cpuinit platform_secondary_init(unsigned int cpu) +{ + trace_hardirqs_off(); + + /* + * if any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + gic_cpu_init(0, gic_cpu_base_addr); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + pen_release = -1; + smp_wmb(); + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * Set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * The secondary processor is waiting to be released from + * the holding pen - release it, then wait for it to flag + * that it has been released by resetting pen_release. + * + * Note that "pen_release" is the hardware CPU ID, whereas + * "cpu" is Linux's internal ID. + */ + pen_release = cpu; + __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); + outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); + + /* + * Send the secondary CPU a soft interrupt, thereby causing + * the boot monitor to read the system wide flags register, + * and branch to the address found there. + */ + smp_cross_call(cpumask_of(cpu)); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + smp_rmb(); + if (pen_release == -1) + break; + + udelay(10); + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} + +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + */ + +void __init smp_init_cpus(void) +{ + void __iomem *scu_base = scu_base_addr(); + unsigned int i, ncores; + + ncores = scu_base ? scu_get_core_count(scu_base) : 1; + + /* sanity check */ + if (ncores == 0) { + printk(KERN_ERR + "S5PV310: strange CM count of 0? Default to 1\n"); + + ncores = 1; + } + + if (ncores > NR_CPUS) { + printk(KERN_WARNING + "S5PV310: no. of cores (%d) greater than configured " + "maximum of %d - clipping\n", + ncores, NR_CPUS); + ncores = NR_CPUS; + } + + for (i = 0; i < ncores; i++) + set_cpu_possible(i, true); +} + +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + unsigned int ncores = num_possible_cpus(); + unsigned int cpu = smp_processor_id(); + int i; + + smp_store_cpu_info(cpu); + + /* are we trying to boot more cores than exist? */ + if (max_cpus > ncores) + max_cpus = ncores; + + /* + * Initialise the present map, which describes the set of CPUs + * actually populated at the present time. + */ + for (i = 0; i < max_cpus; i++) + set_cpu_present(i, true); + + /* + * Initialise the SCU if there are more than one CPU and let + * them know where to start. + */ + if (max_cpus > 1) { + /* + * Enable the local timer or broadcast device for the + * boot CPU, but only if we have more than one CPU. + */ + percpu_timer_setup(); + + scu_enable(scu_base_addr()); + + /* + * Write the address of secondary startup into the + * system-wide flags register. The boot monitor waits + * until it receives a soft interrupt, and then the + * secondary CPU branches to this address. + */ + __raw_writel(BSYM(virt_to_phys(s5pv310_secondary_startup)), S5P_INFORM0); + } +} diff --git a/arch/arm/mach-s5pv310/setup-i2c0.c b/arch/arm/mach-s5pv310/setup-i2c0.c new file mode 100644 index 000000000000..436712807383 --- /dev/null +++ b/arch/arm/mach-s5pv310/setup-i2c0.c @@ -0,0 +1,28 @@ +/* + * linux/arch/arm/mach-s5pv310/setup-i2c0.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * I2C0 GPIO configuration. + * + * Based on plat-s3c64xx/setup-i2c0.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct platform_device; /* don't need the contents */ + +#include <linux/gpio.h> +#include <plat/iic.h> +#include <plat/gpio-cfg.h> + +void s3c_i2c0_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5PV310_GPD1(0), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV310_GPD1(0), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV310_GPD1(1), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV310_GPD1(1), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-s5pv310/setup-i2c1.c b/arch/arm/mach-s5pv310/setup-i2c1.c new file mode 100644 index 000000000000..1ecd5bc35b5a --- /dev/null +++ b/arch/arm/mach-s5pv310/setup-i2c1.c @@ -0,0 +1,25 @@ +/* + * linux/arch/arm/mach-s5pv310/setup-i2c1.c + * + * Copyright (C) 2010 Samsung Electronics Co., Ltd. + * + * I2C1 GPIO configuration. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct platform_device; /* don't need the contents */ + +#include <linux/gpio.h> +#include <plat/iic.h> +#include <plat/gpio-cfg.h> + +void s3c_i2c1_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5PV310_GPD1(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV310_GPD1(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV310_GPD1(3), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV310_GPD1(3), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-s5pv310/setup-i2c2.c b/arch/arm/mach-s5pv310/setup-i2c2.c new file mode 100644 index 000000000000..4c0d8def660a --- /dev/null +++ b/arch/arm/mach-s5pv310/setup-i2c2.c @@ -0,0 +1,25 @@ +/* + * linux/arch/arm/mach-s5pv310/setup-i2c2.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * + * I2C2 GPIO configuration. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct platform_device; /* don't need the contents */ + +#include <linux/gpio.h> +#include <plat/iic.h> +#include <plat/gpio-cfg.h> + +void s3c_i2c2_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5PV310_GPA0(6), S3C_GPIO_SFN(3)); + s3c_gpio_setpull(S5PV310_GPA0(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV310_GPA0(7), S3C_GPIO_SFN(3)); + s3c_gpio_setpull(S5PV310_GPA0(7), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-s5pv310/time.c b/arch/arm/mach-s5pv310/time.c new file mode 100644 index 000000000000..01b012ad1bfd --- /dev/null +++ b/arch/arm/mach-s5pv310/time.c @@ -0,0 +1,287 @@ +/* linux/arch/arm/mach-s5pv310/time.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV310 (and compatible) HRT support + * PWM 2/4 is used for this feature + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/platform_device.h> + +#include <asm/smp_twd.h> + +#include <mach/map.h> +#include <plat/regs-timer.h> +#include <asm/mach/time.h> + +static unsigned long clock_count_per_tick; + +static struct clk *tin2; +static struct clk *tin4; +static struct clk *tdiv2; +static struct clk *tdiv4; +static struct clk *timerclk; + +static void s5pv310_pwm_stop(unsigned int pwm_id) +{ + unsigned long tcon; + + tcon = __raw_readl(S3C2410_TCON); + + switch (pwm_id) { + case 2: + tcon &= ~S3C2410_TCON_T2START; + break; + case 4: + tcon &= ~S3C2410_TCON_T4START; + break; + default: + break; + } + __raw_writel(tcon, S3C2410_TCON); +} + +static void s5pv310_pwm_init(unsigned int pwm_id, unsigned long tcnt) +{ + unsigned long tcon; + + tcon = __raw_readl(S3C2410_TCON); + + /* timers reload after counting zero, so reduce the count by 1 */ + tcnt--; + + /* ensure timer is stopped... */ + switch (pwm_id) { + case 2: + tcon &= ~(0xf<<12); + tcon |= S3C2410_TCON_T2MANUALUPD; + + __raw_writel(tcnt, S3C2410_TCNTB(2)); + __raw_writel(tcnt, S3C2410_TCMPB(2)); + __raw_writel(tcon, S3C2410_TCON); + + break; + case 4: + tcon &= ~(7<<20); + tcon |= S3C2410_TCON_T4MANUALUPD; + + __raw_writel(tcnt, S3C2410_TCNTB(4)); + __raw_writel(tcnt, S3C2410_TCMPB(4)); + __raw_writel(tcon, S3C2410_TCON); + + break; + default: + break; + } +} + +static inline void s5pv310_pwm_start(unsigned int pwm_id, bool periodic) +{ + unsigned long tcon; + + tcon = __raw_readl(S3C2410_TCON); + + switch (pwm_id) { + case 2: + tcon |= S3C2410_TCON_T2START; + tcon &= ~S3C2410_TCON_T2MANUALUPD; + + if (periodic) + tcon |= S3C2410_TCON_T2RELOAD; + else + tcon &= ~S3C2410_TCON_T2RELOAD; + break; + case 4: + tcon |= S3C2410_TCON_T4START; + tcon &= ~S3C2410_TCON_T4MANUALUPD; + + if (periodic) + tcon |= S3C2410_TCON_T4RELOAD; + else + tcon &= ~S3C2410_TCON_T4RELOAD; + break; + default: + break; + } + __raw_writel(tcon, S3C2410_TCON); +} + +static int s5pv310_pwm_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + s5pv310_pwm_init(2, cycles); + s5pv310_pwm_start(2, 0); + return 0; +} + +static void s5pv310_pwm_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + s5pv310_pwm_stop(2); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + s5pv310_pwm_init(2, clock_count_per_tick); + s5pv310_pwm_start(2, 1); + break; + case CLOCK_EVT_MODE_ONESHOT: + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static struct clock_event_device pwm_event_device = { + .name = "pwm_timer2", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .rating = 200, + .shift = 32, + .set_next_event = s5pv310_pwm_set_next_event, + .set_mode = s5pv310_pwm_set_mode, +}; + +irqreturn_t s5pv310_clock_event_isr(int irq, void *dev_id) +{ + struct clock_event_device *evt = &pwm_event_device; + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction s5pv310_clock_event_irq = { + .name = "pwm_timer2_irq", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = s5pv310_clock_event_isr, +}; + +static void __init s5pv310_clockevent_init(void) +{ + unsigned long pclk; + unsigned long clock_rate; + struct clk *tscaler; + + pclk = clk_get_rate(timerclk); + + /* configure clock tick */ + + tscaler = clk_get_parent(tdiv2); + + clk_set_rate(tscaler, pclk / 2); + clk_set_rate(tdiv2, pclk / 2); + clk_set_parent(tin2, tdiv2); + + clock_rate = clk_get_rate(tin2); + + clock_count_per_tick = clock_rate / HZ; + + pwm_event_device.mult = + div_sc(clock_rate, NSEC_PER_SEC, pwm_event_device.shift); + pwm_event_device.max_delta_ns = + clockevent_delta2ns(-1, &pwm_event_device); + pwm_event_device.min_delta_ns = + clockevent_delta2ns(1, &pwm_event_device); + + pwm_event_device.cpumask = cpumask_of(0); + clockevents_register_device(&pwm_event_device); + + setup_irq(IRQ_TIMER2, &s5pv310_clock_event_irq); +} + +static cycle_t s5pv310_pwm4_read(struct clocksource *cs) +{ + return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40)); +} + +struct clocksource pwm_clocksource = { + .name = "pwm_timer4", + .rating = 250, + .read = s5pv310_pwm4_read, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .flags = CLOCK_SOURCE_IS_CONTINUOUS , +}; + +static void __init s5pv310_clocksource_init(void) +{ + unsigned long pclk; + unsigned long clock_rate; + + pclk = clk_get_rate(timerclk); + + clk_set_rate(tdiv4, pclk / 2); + clk_set_parent(tin4, tdiv4); + + clock_rate = clk_get_rate(tin4); + + s5pv310_pwm_init(4, ~0); + s5pv310_pwm_start(4, 1); + + pwm_clocksource.mult = + clocksource_khz2mult(clock_rate/1000, pwm_clocksource.shift); + + if (clocksource_register(&pwm_clocksource)) + panic("%s: can't register clocksource\n", pwm_clocksource.name); +} + +static void __init s5pv310_timer_resources(void) +{ + struct platform_device tmpdev; + + tmpdev.dev.bus = &platform_bus_type; + + timerclk = clk_get(NULL, "timers"); + if (IS_ERR(timerclk)) + panic("failed to get timers clock for system timer"); + + clk_enable(timerclk); + + tmpdev.id = 2; + tin2 = clk_get(&tmpdev.dev, "pwm-tin"); + if (IS_ERR(tin2)) + panic("failed to get pwm-tin2 clock for system timer"); + + tdiv2 = clk_get(&tmpdev.dev, "pwm-tdiv"); + if (IS_ERR(tdiv2)) + panic("failed to get pwm-tdiv2 clock for system timer"); + clk_enable(tin2); + + tmpdev.id = 4; + tin4 = clk_get(&tmpdev.dev, "pwm-tin"); + if (IS_ERR(tin4)) + panic("failed to get pwm-tin4 clock for system timer"); + + tdiv4 = clk_get(&tmpdev.dev, "pwm-tdiv"); + if (IS_ERR(tdiv4)) + panic("failed to get pwm-tdiv4 clock for system timer"); + + clk_enable(tin4); +} + +static void __init s5pv310_timer_init(void) +{ +#ifdef CONFIG_LOCAL_TIMERS + twd_base = S5P_VA_TWD; +#endif + + s5pv310_timer_resources(); + s5pv310_clockevent_init(); + s5pv310_clocksource_init(); +} + +struct sys_timer s5pv310_timer = { + .init = s5pv310_timer_init, +}; diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h index 8c8845b5ae5b..d18f21abef80 100644 --- a/arch/arm/mach-sa1100/include/mach/irqs.h +++ b/arch/arm/mach-sa1100/include/mach/irqs.h @@ -77,7 +77,7 @@ */ #ifdef CONFIG_SA1111 #define NR_IRQS (IRQ_BOARD_END + 55) -#elif defined(CONFIG_SHARPSL_LOCOMO) +#elif defined(CONFIG_SHARP_LOCOMO) #define NR_IRQS (IRQ_BOARD_START + 4) #else #define NR_IRQS (IRQ_BOARD_START) diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 4c704b4e8b34..54b479c35ee0 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -7,6 +7,7 @@ config ARCH_SH7367 select CPU_V6 select HAVE_CLK select COMMON_CLKDEV + select SH_CLK_CPG select GENERIC_CLOCKEVENTS config ARCH_SH7377 @@ -14,6 +15,7 @@ config ARCH_SH7377 select CPU_V7 select HAVE_CLK select COMMON_CLKDEV + select SH_CLK_CPG select GENERIC_CLOCKEVENTS config ARCH_SH7372 @@ -21,6 +23,7 @@ config ARCH_SH7372 select CPU_V7 select HAVE_CLK select COMMON_CLKDEV + select SH_CLK_CPG select GENERIC_CLOCKEVENTS comment "SH-Mobile Board Type" @@ -39,6 +42,20 @@ config MACH_AP4EVB bool "AP4EVB board" depends on ARCH_SH7372 select ARCH_REQUIRE_GPIOLIB + select SH_LCD_MIPI_DSI + +choice + prompt "AP4EVB LCD panel selection" + default AP4EVB_QHD + depends on MACH_AP4EVB + +config AP4EVB_QHD + bool "MIPI-DSI QHD (960x540)" + +config AP4EVB_WVGA + bool "Parallel WVGA (800x480)" + +endchoice comment "SH-Mobile System Configuration" @@ -88,6 +105,15 @@ config SH_TIMER_CMT help This enables build of the CMT timer driver. +config SH_TIMER_TMU + bool "TMU timer driver" + default y + help + This enables build of the TMU timer driver. + endmenu +config SH_CLK_CPG + bool + endif diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 6d385d371c33..5e16b4c69222 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -3,12 +3,12 @@ # # Common objects -obj-y := timer.o console.o +obj-y := timer.o console.o clock.o # CPU objects obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o -obj-$(CONFIG_ARCH_SH7377) += setup-sh7377.o clock-sh7367.o intc-sh7377.o -obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7367.o intc-sh7372.o +obj-$(CONFIG_ARCH_SH7377) += setup-sh7377.o clock-sh7377.o intc-sh7377.o +obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o # Pinmux setup pfc-$(CONFIG_ARCH_SH7367) := pfc-sh7367.o diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 1c2ec96ce261..23d472f9525e 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -17,25 +17,45 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/clk.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/delay.h> +#include <linux/mfd/sh_mobile_sdhi.h> +#include <linux/mmc/host.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sh_mmcif.h> +#include <linux/i2c.h> +#include <linux/i2c/tsc2007.h> #include <linux/io.h> #include <linux/smsc911x.h> +#include <linux/sh_intc.h> +#include <linux/sh_clk.h> #include <linux/gpio.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> +#include <linux/usb/r8a66597.h> + +#include <sound/sh_fsi.h> + +#include <video/sh_mobile_hdmi.h> +#include <video/sh_mobile_lcdc.h> +#include <video/sh_mipi_dsi.h> + #include <mach/common.h> +#include <mach/irqs.h> #include <mach/sh7372.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/mach/time.h> /* * Address Interface BusWidth note @@ -80,12 +100,56 @@ */ /* - * KEYSC + * LCD / IRQ / KEYSC / IrDA + * + * IRQ = IRQ26 (TS), IRQ27 (VIO), IRQ28 (QHD-TouchScreen) + * LCD = 2nd LCDC (WVGA) * - * SW43 KEYSC - * ------------------------- - * ON enable - * OFF disable + * | SW43 | + * SW3 | ON | OFF | + * -------------+-----------------------+---------------+ + * ON | KEY / IrDA | LCD | + * OFF | KEY / IrDA / IRQ | IRQ | + * + * + * QHD / WVGA display + * + * You can choice display type on menuconfig. + * Then, check above dip-switch. + */ + +/* + * USB + * + * J7 : 1-2 MAX3355E VBUS + * 2-3 DC 5.0V + * + * S39: bit2: off + */ + +/* + * FSI/FSMI + * + * SW41 : ON : SH-Mobile AP4 Audio Mode + * : OFF : Bluetooth Audio Mode + */ + +/* + * MMC0/SDHI1 (CN7) + * + * J22 : select card voltage + * 1-2 pin : 1.8v + * 2-3 pin : 3.3v + * + * SW1 | SW33 + * | bit1 | bit2 | bit3 | bit4 + * ------------+------+------+------+------- + * MMC0 OFF | OFF | ON | ON | X + * SDHI1 OFF | ON | X | OFF | ON + * + * voltage lebel + * CN7 : 1.8v + * CN12: 3.3v */ /* MTD */ @@ -148,7 +212,7 @@ static struct resource smc911x_resources[] = { .end = 0x16000000 - 1, .flags = IORESOURCE_MEM, }, { - .start = 6, + .start = evt2irq(0x02c0) /* IRQ6A */, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; @@ -169,6 +233,180 @@ static struct platform_device smc911x_device = { }, }; +/* SH_MMCIF */ +static struct resource sh_mmcif_resources[] = { + [0] = { + .name = "SH_MMCIF", + .start = 0xE6BD0000, + .end = 0xE6BD00FF, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* MMC ERR */ + .start = evt2irq(0x1ac0), + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* MMC NOR */ + .start = evt2irq(0x1ae0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_mmcif_plat_data sh_mmcif_plat = { + .sup_pclk = 0, + .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, + .caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_8_BIT_DATA | + MMC_CAP_NEEDS_POLL, +}; + +static struct platform_device sh_mmcif_device = { + .name = "sh_mmcif", + .id = 0, + .dev = { + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + .platform_data = &sh_mmcif_plat, + }, + .num_resources = ARRAY_SIZE(sh_mmcif_resources), + .resource = sh_mmcif_resources, +}; + +/* SDHI0 */ +static struct sh_mobile_sdhi_info sdhi0_info = { + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, +}; + +static struct resource sdhi0_resources[] = { + [0] = { + .name = "SDHI0", + .start = 0xe6850000, + .end = 0xe68501ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x0e00) /* SDHI0 */, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi0_device = { + .name = "sh_mobile_sdhi", + .num_resources = ARRAY_SIZE(sdhi0_resources), + .resource = sdhi0_resources, + .id = 0, + .dev = { + .platform_data = &sdhi0_info, + }, +}; + +/* SDHI1 */ +static struct sh_mobile_sdhi_info sdhi1_info = { + .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, + .tmio_ocr_mask = MMC_VDD_165_195, +}; + +static struct resource sdhi1_resources[] = { + [0] = { + .name = "SDHI1", + .start = 0xe6860000, + .end = 0xe68601ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x0e80), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi1_device = { + .name = "sh_mobile_sdhi", + .num_resources = ARRAY_SIZE(sdhi1_resources), + .resource = sdhi1_resources, + .id = 1, + .dev = { + .platform_data = &sdhi1_info, + }, +}; + +/* USB1 */ +static void usb1_host_port_power(int port, int power) +{ + if (!power) /* only power-on supported for now */ + return; + + /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */ + __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008); +} + +static struct r8a66597_platdata usb1_host_data = { + .on_chip = 1, + .port_power = usb1_host_port_power, +}; + +static struct resource usb1_host_resources[] = { + [0] = { + .name = "USBHS", + .start = 0xE68B0000, + .end = 0xE68B00E6 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb1_host_device = { + .name = "r8a66597_hcd", + .id = 1, + .dev = { + .dma_mask = NULL, /* not use dma */ + .coherent_dma_mask = 0xffffffff, + .platform_data = &usb1_host_data, + }, + .num_resources = ARRAY_SIZE(usb1_host_resources), + .resource = usb1_host_resources, +}; + +static struct sh_mobile_lcdc_info lcdc_info = { + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + } +}; + +static struct resource lcdc_resources[] = { + [0] = { + .name = "LCDC", + .start = 0xfe940000, /* P4-only space */ + .end = 0xfe943fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x580), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device lcdc_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc_resources), + .resource = lcdc_resources, + .dev = { + .platform_data = &lcdc_info, + .coherent_dma_mask = ~0, + }, +}; + +/* + * QHD display + */ +#ifdef CONFIG_AP4EVB_QHD + /* KEYSC (Needs SW43 set to ON) */ static struct sh_keysc_info keysc_info = { .mode = SH_KEYSC_MODE_1, @@ -191,7 +429,7 @@ static struct resource keysc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 79, + .start = evt2irq(0x0be0), /* KEYSC_KEY */ .flags = IORESOURCE_IRQ, }, }; @@ -206,32 +444,362 @@ static struct platform_device keysc_device = { }, }; -/* SDHI0 */ -static struct resource sdhi0_resources[] = { +/* MIPI-DSI */ +static struct resource mipidsi0_resources[] = { [0] = { - .name = "SDHI0", - .start = 0xe6850000, - .end = 0xe68501ff, + .start = 0xffc60000, + .end = 0xffc68fff, .flags = IORESOURCE_MEM, }, +}; + +static struct sh_mipi_dsi_info mipidsi0_info = { + .data_format = MIPI_RGB888, + .lcd_chan = &lcdc_info.ch[0], +}; + +static struct platform_device mipidsi0_device = { + .name = "sh-mipi-dsi", + .num_resources = ARRAY_SIZE(mipidsi0_resources), + .resource = mipidsi0_resources, + .id = 0, + .dev = { + .platform_data = &mipidsi0_info, + }, +}; + +/* This function will disappear when we switch to (runtime) PM */ +static int __init ap4evb_init_display_clk(void) +{ + struct clk *lcdc_clk; + struct clk *dsitx_clk; + int ret; + + lcdc_clk = clk_get(&lcdc_device.dev, "sh_mobile_lcdc_fb.0"); + if (IS_ERR(lcdc_clk)) + return PTR_ERR(lcdc_clk); + + dsitx_clk = clk_get(&mipidsi0_device.dev, "sh-mipi-dsi.0"); + if (IS_ERR(dsitx_clk)) { + ret = PTR_ERR(dsitx_clk); + goto eclkdsitxget; + } + + ret = clk_enable(lcdc_clk); + if (ret < 0) + goto eclklcdcon; + + ret = clk_enable(dsitx_clk); + if (ret < 0) + goto eclkdsitxon; + + return 0; + +eclkdsitxon: + clk_disable(lcdc_clk); +eclklcdcon: + clk_put(dsitx_clk); +eclkdsitxget: + clk_put(lcdc_clk); + + return ret; +} +device_initcall(ap4evb_init_display_clk); + +static struct platform_device *qhd_devices[] __initdata = { + &mipidsi0_device, + &keysc_device, +}; +#endif /* CONFIG_AP4EVB_QHD */ + +/* FSI */ +#define IRQ_FSI evt2irq(0x1840) +#define FSIACKCR 0xE6150018 +static void fsiackcr_init(struct clk *clk) +{ + u32 status = __raw_readl(clk->enable_reg); + + /* use external clock */ + status &= ~0x000000ff; + status |= 0x00000080; + __raw_writel(status, clk->enable_reg); +} + +static struct clk_ops fsiackcr_clk_ops = { + .init = fsiackcr_init, +}; + +static struct clk fsiackcr_clk = { + .ops = &fsiackcr_clk_ops, + .enable_reg = (void __iomem *)FSIACKCR, + .rate = 0, /* unknown */ +}; + +static struct sh_fsi_platform_info fsi_info = { + .porta_flags = SH_FSI_BRS_INV | + SH_FSI_OUT_SLAVE_MODE | + SH_FSI_IN_SLAVE_MODE | + SH_FSI_OFMT(PCM) | + SH_FSI_IFMT(PCM), +}; + +static struct resource fsi_resources[] = { + [0] = { + .name = "FSI", + .start = 0xFE3C0000, + .end = 0xFE3C0400 - 1, + .flags = IORESOURCE_MEM, + }, [1] = { - .start = 96, + .start = IRQ_FSI, .flags = IORESOURCE_IRQ, }, }; -static struct platform_device sdhi0_device = { - .name = "sh_mobile_sdhi", - .num_resources = ARRAY_SIZE(sdhi0_resources), - .resource = sdhi0_resources, - .id = 0, +static struct platform_device fsi_device = { + .name = "sh_fsi2", + .id = 0, + .num_resources = ARRAY_SIZE(fsi_resources), + .resource = fsi_resources, + .dev = { + .platform_data = &fsi_info, + }, +}; + +static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = { + .clock_source = LCDC_CLK_EXTERNAL, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + .interface_type = RGB24, + .clock_divider = 1, + .flags = LCDC_FLAGS_DWPOL, + .lcd_cfg = { + .name = "HDMI", + /* So far only 720p is supported */ + .xres = 1280, + .yres = 720, + /* + * If left and right margins are not multiples of 8, + * LDHAJR will be adjusted accordingly by the LCDC + * driver. Until we start using EDID, these values + * might have to be adjusted for different monitors. + */ + .left_margin = 200, + .right_margin = 88, + .hsync_len = 48, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + .pixclock = 13468, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, + }, + } +}; + +static struct resource lcdc1_resources[] = { + [0] = { + .name = "LCDC1", + .start = 0xfe944000, + .end = 0xfe947fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x17a0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device lcdc1_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc1_resources), + .resource = lcdc1_resources, + .id = 1, + .dev = { + .platform_data = &sh_mobile_lcdc1_info, + .coherent_dma_mask = ~0, + }, +}; + +static struct sh_mobile_hdmi_info hdmi_info = { + .lcd_chan = &sh_mobile_lcdc1_info.ch[0], + .lcd_dev = &lcdc1_device.dev, +}; + +static struct resource hdmi_resources[] = { + [0] = { + .name = "HDMI", + .start = 0xe6be0000, + .end = 0xe6be00ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* There's also an HDMI interrupt on INTCS @ 0x18e0 */ + .start = evt2irq(0x17e0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device hdmi_device = { + .name = "sh-mobile-hdmi", + .num_resources = ARRAY_SIZE(hdmi_resources), + .resource = hdmi_resources, + .id = -1, + .dev = { + .platform_data = &hdmi_info, + }, }; static struct platform_device *ap4evb_devices[] __initdata = { &nor_flash_device, &smc911x_device, - &keysc_device, &sdhi0_device, + &sdhi1_device, + &usb1_host_device, + &fsi_device, + &sh_mmcif_device, + &lcdc1_device, + &lcdc_device, + &hdmi_device, +}; + +static int __init hdmi_init_pm_clock(void) +{ + struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick"); + int ret; + long rate; + + if (IS_ERR(hdmi_ick)) { + ret = PTR_ERR(hdmi_ick); + pr_err("Cannot get HDMI ICK: %d\n", ret); + goto out; + } + + ret = clk_set_parent(&pllc2_clk, &dv_clki_div2_clk); + if (ret < 0) { + pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, pllc2_clk.usecount); + goto out; + } + + pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&pllc2_clk)); + + rate = clk_round_rate(&pllc2_clk, 594000000); + if (rate < 0) { + pr_err("Cannot get suitable rate: %ld\n", rate); + ret = rate; + goto out; + } + + ret = clk_set_rate(&pllc2_clk, rate); + if (ret < 0) { + pr_err("Cannot set rate %ld: %d\n", rate, ret); + goto out; + } + + pr_debug("PLLC2 set frequency %lu\n", rate); + + ret = clk_set_parent(hdmi_ick, &pllc2_clk); + if (ret < 0) { + pr_err("Cannot set HDMI parent: %d\n", ret); + goto out; + } + +out: + if (!IS_ERR(hdmi_ick)) + clk_put(hdmi_ick); + return ret; +} + +device_initcall(hdmi_init_pm_clock); + +/* + * FIXME !! + * + * gpio_no_direction + * gpio_pull_up + * are quick_hack. + * + * current gpio frame work doesn't have + * the method to control only pull up/down/free. + * this function should be replaced by correct gpio function + */ +static void __init gpio_no_direction(u32 addr) +{ + __raw_writeb(0x00, addr); +} + +static void __init gpio_pull_up(u32 addr) +{ + u8 data = __raw_readb(addr); + + data &= 0x0F; + data |= 0xC0; + __raw_writeb(data, addr); +} + +/* TouchScreen */ +#define IRQ28 evt2irq(0x3380) /* IRQ28A */ +#define IRQ7 evt2irq(0x02e0) /* IRQ7A */ +static int ts_get_pendown_state(void) +{ + int val1, val2; + + gpio_free(GPIO_FN_IRQ28_123); + gpio_free(GPIO_FN_IRQ7_40); + + gpio_request(GPIO_PORT123, NULL); + gpio_request(GPIO_PORT40, NULL); + + gpio_direction_input(GPIO_PORT123); + gpio_direction_input(GPIO_PORT40); + + val1 = gpio_get_value(GPIO_PORT123); + val2 = gpio_get_value(GPIO_PORT40); + + gpio_request(GPIO_FN_IRQ28_123, NULL); /* for QHD */ + gpio_request(GPIO_FN_IRQ7_40, NULL); /* for WVGA */ + + return val1 ^ val2; +} + +#define PORT40CR 0xE6051028 +#define PORT123CR 0xE605007B +static int ts_init(void) +{ + gpio_request(GPIO_FN_IRQ28_123, NULL); /* for QHD */ + gpio_request(GPIO_FN_IRQ7_40, NULL); /* for WVGA */ + + gpio_pull_up(PORT40CR); + gpio_pull_up(PORT123CR); + + return 0; +} + +static struct tsc2007_platform_data tsc2007_info = { + .model = 2007, + .x_plate_ohms = 180, + .get_pendown_state = ts_get_pendown_state, + .init_platform_hw = ts_init, +}; + +static struct i2c_board_info tsc_device = { + I2C_BOARD_INFO("tsc2007", 0x48), + .type = "tsc2007", + .platform_data = &tsc2007_info, + /*.irq is selected on ap4evb_init */ +}; + +/* I2C */ +static struct i2c_board_info i2c0_devices[] = { + { + I2C_BOARD_INFO("ak4643", 0x13), + }, +}; + +static struct i2c_board_info i2c1_devices[] = { + { + I2C_BOARD_INFO("r2025sd", 0x32), + }, }; static struct map_desc ap4evb_io_desc[] __initdata = { @@ -250,14 +818,18 @@ static void __init ap4evb_map_io(void) { iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc)); - /* setup early devices, clocks and console here as well */ + /* setup early devices and console here as well */ sh7372_add_early_devices(); - sh7367_clock_init(); /* use g3 clocks for now */ shmobile_setup_console(); } +#define GPIO_PORT9CR 0xE6051009 +#define GPIO_PORT10CR 0xE605100A static void __init ap4evb_init(void) { + u32 srcr4; + struct clk *clk; + sh7372_pinmux_init(); /* enable SCIFA0 */ @@ -296,6 +868,93 @@ static void __init ap4evb_init(void) gpio_export(GPIO_PORT34, 0); gpio_export(GPIO_PORT35, 0); + /* SDHI0 */ + gpio_request(GPIO_FN_SDHICD0, NULL); + gpio_request(GPIO_FN_SDHIWP0, NULL); + gpio_request(GPIO_FN_SDHICMD0, NULL); + gpio_request(GPIO_FN_SDHICLK0, NULL); + gpio_request(GPIO_FN_SDHID0_3, NULL); + gpio_request(GPIO_FN_SDHID0_2, NULL); + gpio_request(GPIO_FN_SDHID0_1, NULL); + gpio_request(GPIO_FN_SDHID0_0, NULL); + + /* SDHI1 */ + gpio_request(GPIO_FN_SDHICMD1, NULL); + gpio_request(GPIO_FN_SDHICLK1, NULL); + gpio_request(GPIO_FN_SDHID1_3, NULL); + gpio_request(GPIO_FN_SDHID1_2, NULL); + gpio_request(GPIO_FN_SDHID1_1, NULL); + gpio_request(GPIO_FN_SDHID1_0, NULL); + + /* MMCIF */ + gpio_request(GPIO_FN_MMCD0_0, NULL); + gpio_request(GPIO_FN_MMCD0_1, NULL); + gpio_request(GPIO_FN_MMCD0_2, NULL); + gpio_request(GPIO_FN_MMCD0_3, NULL); + gpio_request(GPIO_FN_MMCD0_4, NULL); + gpio_request(GPIO_FN_MMCD0_5, NULL); + gpio_request(GPIO_FN_MMCD0_6, NULL); + gpio_request(GPIO_FN_MMCD0_7, NULL); + gpio_request(GPIO_FN_MMCCMD0, NULL); + gpio_request(GPIO_FN_MMCCLK0, NULL); + + /* USB enable */ + gpio_request(GPIO_FN_VBUS0_1, NULL); + gpio_request(GPIO_FN_IDIN_1_18, NULL); + gpio_request(GPIO_FN_PWEN_1_115, NULL); + gpio_request(GPIO_FN_OVCN_1_114, NULL); + gpio_request(GPIO_FN_EXTLP_1, NULL); + gpio_request(GPIO_FN_OVCN2_1, NULL); + + /* setup USB phy */ + __raw_writew(0x8a0a, 0xE6058130); /* USBCR2 */ + + /* enable FSI2 */ + gpio_request(GPIO_FN_FSIAIBT, NULL); + gpio_request(GPIO_FN_FSIAILR, NULL); + gpio_request(GPIO_FN_FSIAISLD, NULL); + gpio_request(GPIO_FN_FSIAOSLD, NULL); + gpio_request(GPIO_PORT161, NULL); + gpio_direction_output(GPIO_PORT161, 0); /* slave */ + + gpio_request(GPIO_PORT9, NULL); + gpio_request(GPIO_PORT10, NULL); + gpio_no_direction(GPIO_PORT9CR); /* FSIAOBT needs no direction */ + gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */ + + /* set SPU2 clock to 119.6 MHz */ + clk = clk_get(NULL, "spu_clk"); + if (!IS_ERR(clk)) { + clk_set_rate(clk, clk_round_rate(clk, 119600000)); + clk_put(clk); + } + + /* change parent of FSI A */ + clk = clk_get(NULL, "fsia_clk"); + if (!IS_ERR(clk)) { + clk_register(&fsiackcr_clk); + clk_set_parent(clk, &fsiackcr_clk); + clk_put(clk); + } + + /* + * set irq priority, to avoid sound chopping + * when NFS rootfs is used + * FSI(3) > SMSC911X(2) + */ + intc_set_priority(IRQ_FSI, 3); + + i2c_register_board_info(0, i2c0_devices, + ARRAY_SIZE(i2c0_devices)); + + i2c_register_board_info(1, i2c1_devices, + ARRAY_SIZE(i2c1_devices)); + +#ifdef CONFIG_AP4EVB_QHD + /* + * QHD + */ + /* enable KEYSC */ gpio_request(GPIO_FN_KEYOUT0, NULL); gpio_request(GPIO_FN_KEYOUT1, NULL); @@ -308,26 +967,122 @@ static void __init ap4evb_init(void) gpio_request(GPIO_FN_KEYIN3_133, NULL); gpio_request(GPIO_FN_KEYIN4, NULL); - /* SDHI0 */ - gpio_request(GPIO_FN_SDHICD0, NULL); - gpio_request(GPIO_FN_SDHIWP0, NULL); - gpio_request(GPIO_FN_SDHICMD0, NULL); - gpio_request(GPIO_FN_SDHICLK0, NULL); - gpio_request(GPIO_FN_SDHID0_3, NULL); - gpio_request(GPIO_FN_SDHID0_2, NULL); - gpio_request(GPIO_FN_SDHID0_1, NULL); - gpio_request(GPIO_FN_SDHID0_0, NULL); + /* enable TouchScreen */ + set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW); + + tsc_device.irq = IRQ28; + i2c_register_board_info(1, &tsc_device, 1); + + /* LCDC0 */ + lcdc_info.clock_source = LCDC_CLK_PERIPHERAL; + lcdc_info.ch[0].interface_type = RGB24; + lcdc_info.ch[0].clock_divider = 1; + lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL; + lcdc_info.ch[0].lcd_cfg.name = "R63302(QHD)"; + lcdc_info.ch[0].lcd_cfg.xres = 544; + lcdc_info.ch[0].lcd_cfg.yres = 961; + lcdc_info.ch[0].lcd_cfg.left_margin = 72; + lcdc_info.ch[0].lcd_cfg.right_margin = 600; + lcdc_info.ch[0].lcd_cfg.hsync_len = 16; + lcdc_info.ch[0].lcd_cfg.upper_margin = 8; + lcdc_info.ch[0].lcd_cfg.lower_margin = 8; + lcdc_info.ch[0].lcd_cfg.vsync_len = 2; + lcdc_info.ch[0].lcd_cfg.sync = FB_SYNC_VERT_HIGH_ACT | + FB_SYNC_HOR_HIGH_ACT; + lcdc_info.ch[0].lcd_size_cfg.width = 44; + lcdc_info.ch[0].lcd_size_cfg.height = 79; + + platform_add_devices(qhd_devices, ARRAY_SIZE(qhd_devices)); + +#else + /* + * WVGA + */ + gpio_request(GPIO_FN_LCDD17, NULL); + gpio_request(GPIO_FN_LCDD16, NULL); + gpio_request(GPIO_FN_LCDD15, NULL); + gpio_request(GPIO_FN_LCDD14, NULL); + gpio_request(GPIO_FN_LCDD13, NULL); + gpio_request(GPIO_FN_LCDD12, NULL); + gpio_request(GPIO_FN_LCDD11, NULL); + gpio_request(GPIO_FN_LCDD10, NULL); + gpio_request(GPIO_FN_LCDD9, NULL); + gpio_request(GPIO_FN_LCDD8, NULL); + gpio_request(GPIO_FN_LCDD7, NULL); + gpio_request(GPIO_FN_LCDD6, NULL); + gpio_request(GPIO_FN_LCDD5, NULL); + gpio_request(GPIO_FN_LCDD4, NULL); + gpio_request(GPIO_FN_LCDD3, NULL); + gpio_request(GPIO_FN_LCDD2, NULL); + gpio_request(GPIO_FN_LCDD1, NULL); + gpio_request(GPIO_FN_LCDD0, NULL); + gpio_request(GPIO_FN_LCDDISP, NULL); + gpio_request(GPIO_FN_LCDDCK, NULL); + + gpio_request(GPIO_PORT189, NULL); /* backlight */ + gpio_direction_output(GPIO_PORT189, 1); + + gpio_request(GPIO_PORT151, NULL); /* LCDDON */ + gpio_direction_output(GPIO_PORT151, 1); + + lcdc_info.clock_source = LCDC_CLK_BUS; + lcdc_info.ch[0].interface_type = RGB18; + lcdc_info.ch[0].clock_divider = 2; + lcdc_info.ch[0].flags = 0; + lcdc_info.ch[0].lcd_cfg.name = "WVGA Panel"; + lcdc_info.ch[0].lcd_cfg.xres = 800; + lcdc_info.ch[0].lcd_cfg.yres = 480; + lcdc_info.ch[0].lcd_cfg.left_margin = 220; + lcdc_info.ch[0].lcd_cfg.right_margin = 110; + lcdc_info.ch[0].lcd_cfg.hsync_len = 70; + lcdc_info.ch[0].lcd_cfg.upper_margin = 20; + lcdc_info.ch[0].lcd_cfg.lower_margin = 5; + lcdc_info.ch[0].lcd_cfg.vsync_len = 5; + lcdc_info.ch[0].lcd_cfg.sync = 0; + lcdc_info.ch[0].lcd_size_cfg.width = 152; + lcdc_info.ch[0].lcd_size_cfg.height = 91; + + /* enable TouchScreen */ + set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW); + + tsc_device.irq = IRQ7; + i2c_register_board_info(0, &tsc_device, 1); +#endif /* CONFIG_AP4EVB_QHD */ sh7372_add_standard_devices(); + /* HDMI */ + gpio_request(GPIO_FN_HDMI_HPD, NULL); + gpio_request(GPIO_FN_HDMI_CEC, NULL); + + /* Reset HDMI, must be held at least one EXTALR (32768Hz) period */ +#define SRCR4 0xe61580bc + srcr4 = __raw_readl(SRCR4); + __raw_writel(srcr4 | (1 << 13), SRCR4); + udelay(50); + __raw_writel(srcr4 & ~(1 << 13), SRCR4); + platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices)); } +static void __init ap4evb_timer_init(void) +{ + sh7372_clock_init(); + shmobile_timer.init(); + + /* External clock source */ + clk_set_rate(&dv_clki_clk, 27000000); +} + +static struct sys_timer ap4evb_timer = { + .init = ap4evb_timer_init, +}; + MACHINE_START(AP4EVB, "ap4evb") .phys_io = 0xe6000000, .io_pg_offst = ((0xe6000000) >> 18) & 0xfffc, .map_io = ap4evb_map_io, .init_irq = sh7372_init_irq, .init_machine = ap4evb_init, - .timer = &shmobile_timer, + .timer = &ap4evb_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c index 9247503296c4..a5525901e91f 100644 --- a/arch/arm/mach-shmobile/board-g3evm.c +++ b/arch/arm/mach-shmobile/board-g3evm.c @@ -37,6 +37,15 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/mach/time.h> + +/* + * IrDA + * + * S67: 5bit : ON power + * : 6bit : ON remote control + * OFF IrDA + */ static struct mtd_partition nor_flash_partitions[] = { { @@ -91,7 +100,7 @@ static struct platform_device nor_flash_device = { }; /* USBHS */ -void usb_host_port_power(int port, int power) +static void usb_host_port_power(int port, int power) { if (!power) /* only power-on supported for now */ return; @@ -113,7 +122,7 @@ static struct resource usb_host_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 65, + .start = evt2irq(0xa20), /* USBHS_USHI0 */ .flags = IORESOURCE_IRQ, }, }; @@ -153,7 +162,7 @@ static struct resource keysc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 79, + .start = evt2irq(0xbe0), /* KEYSC_KEY */ .flags = IORESOURCE_IRQ, }, }; @@ -209,11 +218,31 @@ static struct platform_device nand_flash_device = { }, }; +static struct resource irda_resources[] = { + [0] = { + .start = 0xE6D00000, + .end = 0xE6D01FD4 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x480), /* IRDA */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device irda_device = { + .name = "sh_irda", + .id = -1, + .resource = irda_resources, + .num_resources = ARRAY_SIZE(irda_resources), +}; + static struct platform_device *g3evm_devices[] __initdata = { &nor_flash_device, &usb_host_device, &keysc_device, &nand_flash_device, + &irda_device, }; static struct map_desc g3evm_io_desc[] __initdata = { @@ -232,9 +261,8 @@ static void __init g3evm_map_io(void) { iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc)); - /* setup early devices, clocks and console here as well */ + /* setup early devices and console here as well */ sh7367_add_early_devices(); - sh7367_clock_init(); shmobile_setup_console(); } @@ -271,9 +299,6 @@ static void __init g3evm_init(void) gpio_request(GPIO_FN_EXTLP, NULL); gpio_request(GPIO_FN_IDIN, NULL); - /* enable clock in SYMSTPCR2 */ - __raw_writel(__raw_readl(0xe6158048) & ~(1 << 22), 0xe6158048); - /* setup USB phy */ __raw_writew(0x0300, 0xe605810a); /* USBCR1 */ __raw_writew(0x00e0, 0xe60581c0); /* CPFCH */ @@ -318,16 +343,32 @@ static void __init g3evm_init(void) /* FOE, FCDE, FSC on dedicated pins */ __raw_writel(__raw_readl(0xe6158048) & ~(1 << 15), 0xe6158048); + /* IrDA */ + gpio_request(GPIO_FN_IRDA_OUT, NULL); + gpio_request(GPIO_FN_IRDA_IN, NULL); + gpio_request(GPIO_FN_IRDA_FIRSEL, NULL); + set_irq_type(evt2irq(0x480), IRQ_TYPE_LEVEL_LOW); + sh7367_add_standard_devices(); platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices)); } +static void __init g3evm_timer_init(void) +{ + sh7367_clock_init(); + shmobile_timer.init(); +} + +static struct sys_timer g3evm_timer = { + .init = g3evm_timer_init, +}; + MACHINE_START(G3EVM, "g3evm") .phys_io = 0xe6000000, .io_pg_offst = ((0xe6000000) >> 18) & 0xfffc, .map_io = g3evm_map_io, .init_irq = sh7367_init_irq, .init_machine = g3evm_init, - .timer = &shmobile_timer, + .timer = &g3evm_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c index 10673a90be52..2c3ff6f7f34c 100644 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ b/arch/arm/mach-shmobile/board-g4evm.c @@ -30,12 +30,39 @@ #include <linux/io.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> +#include <linux/mfd/sh_mobile_sdhi.h> #include <linux/gpio.h> #include <mach/sh7377.h> #include <mach/common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/mach/time.h> + +/* + * SDHI + * + * SDHI0 : card detection is possible + * SDHI1 : card detection is impossible + * + * [G4-MAIN-BOARD] + * JP74 : short # DBG_2V8A for SDHI0 + * JP75 : NC # DBG_3V3A for SDHI0 + * JP76 : NC # DBG_3V3A_SD for SDHI0 + * JP77 : NC # 3V3A_SDIO for SDHI1 + * JP78 : short # DBG_2V8A for SDHI1 + * JP79 : NC # DBG_3V3A for SDHI1 + * JP80 : NC # DBG_3V3A_SD for SDHI1 + * + * [G4-CORE-BOARD] + * S32 : all off # to dissever from G3-CORE_DBG board + * S33 : all off # to dissever from G3-CORE_DBG board + * + * [G3-CORE_DBG-BOARD] + * S1 : all off # to dissever from G3-CORE_DBG board + * S3 : all off # to dissever from G3-CORE_DBG board + * S4 : all off # to dissever from G3-CORE_DBG board + */ static struct mtd_partition nor_flash_partitions[] = { { @@ -90,7 +117,7 @@ static struct platform_device nor_flash_device = { }; /* USBHS */ -void usb_host_port_power(int port, int power) +static void usb_host_port_power(int port, int power) { if (!power) /* only power-on supported for now */ return; @@ -112,8 +139,7 @@ static struct resource usb_host_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 65, - .end = 65, + .start = evt2irq(0x0a20), /* USBHS_USHI0 */ .flags = IORESOURCE_IRQ, }, }; @@ -154,7 +180,7 @@ static struct resource keysc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 79, + .start = evt2irq(0x0be0), /* KEYSC_KEY */ .flags = IORESOURCE_IRQ, }, }; @@ -169,10 +195,53 @@ static struct platform_device keysc_device = { }, }; +/* SDHI */ +static struct resource sdhi0_resources[] = { + [0] = { + .name = "SDHI0", + .start = 0xe6d50000, + .end = 0xe6d501ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x0e00), /* SDHI0 */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi0_device = { + .name = "sh_mobile_sdhi", + .num_resources = ARRAY_SIZE(sdhi0_resources), + .resource = sdhi0_resources, + .id = 0, +}; + +static struct resource sdhi1_resources[] = { + [0] = { + .name = "SDHI1", + .start = 0xe6d60000, + .end = 0xe6d601ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x0e80), /* SDHI1 */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi1_device = { + .name = "sh_mobile_sdhi", + .num_resources = ARRAY_SIZE(sdhi1_resources), + .resource = sdhi1_resources, + .id = 1, +}; + static struct platform_device *g4evm_devices[] __initdata = { &nor_flash_device, &usb_host_device, &keysc_device, + &sdhi0_device, + &sdhi1_device, }; static struct map_desc g4evm_io_desc[] __initdata = { @@ -191,12 +260,41 @@ static void __init g4evm_map_io(void) { iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc)); - /* setup early devices, clocks and console here as well */ + /* setup early devices and console here as well */ sh7377_add_early_devices(); - sh7367_clock_init(); /* use g3 clocks for now */ shmobile_setup_console(); } +#define GPIO_SDHID0_D0 0xe60520fc +#define GPIO_SDHID0_D1 0xe60520fd +#define GPIO_SDHID0_D2 0xe60520fe +#define GPIO_SDHID0_D3 0xe60520ff +#define GPIO_SDHICMD0 0xe6052100 + +#define GPIO_SDHID1_D0 0xe6052103 +#define GPIO_SDHID1_D1 0xe6052104 +#define GPIO_SDHID1_D2 0xe6052105 +#define GPIO_SDHID1_D3 0xe6052106 +#define GPIO_SDHICMD1 0xe6052107 + +/* + * FIXME !! + * + * gpio_pull_up is quick_hack. + * + * current gpio frame work doesn't have + * the method to control only pull up/down/free. + * this function should be replaced by correct gpio function + */ +static void __init gpio_pull_up(u32 addr) +{ + u8 data = __raw_readb(addr); + + data &= 0x0F; + data |= 0xC0; + __raw_writeb(data, addr); +} + static void __init g4evm_init(void) { sh7377_pinmux_init(); @@ -229,9 +327,6 @@ static void __init g4evm_init(void) gpio_request(GPIO_FN_EXTLP, NULL); gpio_request(GPIO_FN_IDIN, NULL); - /* enable clock in SMSTPCR3 */ - __raw_writel(__raw_readl(0xe615013c) & ~(1 << 22), 0xe615013c); - /* setup USB phy */ __raw_writew(0x0200, 0xe605810a); /* USBCR1 */ __raw_writew(0x00e0, 0xe60581c0); /* CPFCH */ @@ -253,16 +348,54 @@ static void __init g4evm_init(void) gpio_request(GPIO_FN_PORT71_KEYIN5_PU, NULL); gpio_request(GPIO_FN_PORT72_KEYIN6_PU, NULL); + /* SDHI0 */ + gpio_request(GPIO_FN_SDHICLK0, NULL); + gpio_request(GPIO_FN_SDHICD0, NULL); + gpio_request(GPIO_FN_SDHID0_0, NULL); + gpio_request(GPIO_FN_SDHID0_1, NULL); + gpio_request(GPIO_FN_SDHID0_2, NULL); + gpio_request(GPIO_FN_SDHID0_3, NULL); + gpio_request(GPIO_FN_SDHICMD0, NULL); + gpio_request(GPIO_FN_SDHIWP0, NULL); + gpio_pull_up(GPIO_SDHID0_D0); + gpio_pull_up(GPIO_SDHID0_D1); + gpio_pull_up(GPIO_SDHID0_D2); + gpio_pull_up(GPIO_SDHID0_D3); + gpio_pull_up(GPIO_SDHICMD0); + + /* SDHI1 */ + gpio_request(GPIO_FN_SDHICLK1, NULL); + gpio_request(GPIO_FN_SDHID1_0, NULL); + gpio_request(GPIO_FN_SDHID1_1, NULL); + gpio_request(GPIO_FN_SDHID1_2, NULL); + gpio_request(GPIO_FN_SDHID1_3, NULL); + gpio_request(GPIO_FN_SDHICMD1, NULL); + gpio_pull_up(GPIO_SDHID1_D0); + gpio_pull_up(GPIO_SDHID1_D1); + gpio_pull_up(GPIO_SDHID1_D2); + gpio_pull_up(GPIO_SDHID1_D3); + gpio_pull_up(GPIO_SDHICMD1); + sh7377_add_standard_devices(); platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices)); } +static void __init g4evm_timer_init(void) +{ + sh7377_clock_init(); + shmobile_timer.init(); +} + +static struct sys_timer g4evm_timer = { + .init = g4evm_timer_init, +}; + MACHINE_START(G4EVM, "g4evm") .phys_io = 0xe6000000, .io_pg_offst = ((0xe6000000) >> 18) & 0xfffc, .map_io = g4evm_map_io, .init_irq = sh7377_init_irq, .init_machine = g4evm_init, - .timer = &shmobile_timer, + .timer = &g4evm_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c index bb940c6e4e6c..b6454c9f2abb 100644 --- a/arch/arm/mach-shmobile/clock-sh7367.c +++ b/arch/arm/mach-shmobile/clock-sh7367.c @@ -1,5 +1,5 @@ /* - * Preliminary clock framework support for sh7367 + * SH7367 clock framework support * * Copyright (C) 2010 Magnus Damm * @@ -17,87 +17,342 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include <linux/init.h> -#include <linux/module.h> #include <linux/kernel.h> -#include <linux/list.h> -#include <linux/clk.h> +#include <linux/io.h> +#include <linux/sh_clk.h> +#include <mach/common.h> +#include <asm/clkdev.h> + +/* SH7367 registers */ +#define RTFRQCR 0xe6150000 +#define SYFRQCR 0xe6150004 +#define CMFRQCR 0xe61500E0 +#define VCLKCR1 0xe6150008 +#define VCLKCR2 0xe615000C +#define VCLKCR3 0xe615001C +#define SCLKACR 0xe6150010 +#define SCLKBCR 0xe6150014 +#define SUBUSBCKCR 0xe6158080 +#define SPUCKCR 0xe6150084 +#define MSUCKCR 0xe6150088 +#define MVI3CKCR 0xe6150090 +#define VOUCKCR 0xe6150094 +#define MFCK1CR 0xe6150098 +#define MFCK2CR 0xe615009C +#define PLLC1CR 0xe6150028 +#define PLLC2CR 0xe615002C +#define RTMSTPCR0 0xe6158030 +#define RTMSTPCR2 0xe6158038 +#define SYMSTPCR0 0xe6158040 +#define SYMSTPCR2 0xe6158048 +#define CMMSTPCR0 0xe615804c -struct clk { - const char *name; - unsigned long rate; +/* Fixed 32 KHz root clock from EXTALR pin */ +static struct clk r_clk = { + .rate = 32768, }; -#include <asm/clkdev.h> +/* + * 26MHz default rate for the EXTALB1 root input clock. + * If needed, reset this with clk_set_rate() from the platform code. + */ +struct clk sh7367_extalb1_clk = { + .rate = 26666666, +}; -int __clk_get(struct clk *clk) -{ - return 1; -} -EXPORT_SYMBOL(__clk_get); +/* + * 48MHz default rate for the EXTAL2 root input clock. + * If needed, reset this with clk_set_rate() from the platform code. + */ +struct clk sh7367_extal2_clk = { + .rate = 48000000, +}; -void __clk_put(struct clk *clk) +/* A fixed divide-by-2 block */ +static unsigned long div2_recalc(struct clk *clk) { + return clk->parent->rate / 2; } -EXPORT_SYMBOL(__clk_put); +static struct clk_ops div2_clk_ops = { + .recalc = div2_recalc, +}; + +/* Divide extalb1 by two */ +static struct clk extalb1_div2_clk = { + .ops = &div2_clk_ops, + .parent = &sh7367_extalb1_clk, +}; + +/* Divide extal2 by two */ +static struct clk extal2_div2_clk = { + .ops = &div2_clk_ops, + .parent = &sh7367_extal2_clk, +}; -int clk_enable(struct clk *clk) +/* PLLC1 */ +static unsigned long pllc1_recalc(struct clk *clk) { - return 0; + unsigned long mult = 1; + + if (__raw_readl(PLLC1CR) & (1 << 14)) + mult = (((__raw_readl(RTFRQCR) >> 24) & 0x3f) + 1) * 2; + + return clk->parent->rate * mult; } -EXPORT_SYMBOL(clk_enable); -void clk_disable(struct clk *clk) +static struct clk_ops pllc1_clk_ops = { + .recalc = pllc1_recalc, +}; + +static struct clk pllc1_clk = { + .ops = &pllc1_clk_ops, + .flags = CLK_ENABLE_ON_INIT, + .parent = &extalb1_div2_clk, +}; + +/* Divide PLLC1 by two */ +static struct clk pllc1_div2_clk = { + .ops = &div2_clk_ops, + .parent = &pllc1_clk, +}; + +/* PLLC2 */ +static unsigned long pllc2_recalc(struct clk *clk) { + unsigned long mult = 1; + + if (__raw_readl(PLLC2CR) & (1 << 31)) + mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2; + + return clk->parent->rate * mult; } -EXPORT_SYMBOL(clk_disable); -unsigned long clk_get_rate(struct clk *clk) +static struct clk_ops pllc2_clk_ops = { + .recalc = pllc2_recalc, +}; + +static struct clk pllc2_clk = { + .ops = &pllc2_clk_ops, + .flags = CLK_ENABLE_ON_INIT, + .parent = &extalb1_div2_clk, +}; + +static struct clk *main_clks[] = { + &r_clk, + &sh7367_extalb1_clk, + &sh7367_extal2_clk, + &extalb1_div2_clk, + &extal2_div2_clk, + &pllc1_clk, + &pllc1_div2_clk, + &pllc2_clk, +}; + +static void div4_kick(struct clk *clk) { - return clk ? clk->rate : 0; + unsigned long value; + + /* set KICK bit in SYFRQCR to update hardware setting */ + value = __raw_readl(SYFRQCR); + value |= (1 << 31); + __raw_writel(value, SYFRQCR); } -EXPORT_SYMBOL(clk_get_rate); -/* a static peripheral clock for now - enough to get sh-sci working */ -static struct clk peripheral_clk = { - .name = "peripheral_clk", - .rate = 48000000, +static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, + 24, 32, 36, 48, 0, 72, 0, 0 }; + +static struct clk_div_mult_table div4_div_mult_table = { + .divisors = divisors, + .nr_divisors = ARRAY_SIZE(divisors), }; -/* a static rclk for now - enough to get sh_cmt working */ -static struct clk r_clk = { - .name = "r_clk", - .rate = 32768, +static struct clk_div4_table div4_table = { + .div_mult_table = &div4_div_mult_table, + .kick = div4_kick, +}; + +enum { DIV4_I, DIV4_G, DIV4_S, DIV4_B, + DIV4_ZX, DIV4_ZT, DIV4_Z, DIV4_ZD, DIV4_HP, + DIV4_ZS, DIV4_ZB, DIV4_ZB3, DIV4_CP, DIV4_NR }; + +#define DIV4(_reg, _bit, _mask, _flags) \ + SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags) + +static struct clk div4_clks[DIV4_NR] = { + [DIV4_I] = DIV4(RTFRQCR, 20, 0x6fff, CLK_ENABLE_ON_INIT), + [DIV4_G] = DIV4(RTFRQCR, 16, 0x6fff, CLK_ENABLE_ON_INIT), + [DIV4_S] = DIV4(RTFRQCR, 12, 0x6fff, CLK_ENABLE_ON_INIT), + [DIV4_B] = DIV4(RTFRQCR, 8, 0x6fff, CLK_ENABLE_ON_INIT), + [DIV4_ZX] = DIV4(SYFRQCR, 20, 0x6fff, 0), + [DIV4_ZT] = DIV4(SYFRQCR, 16, 0x6fff, 0), + [DIV4_Z] = DIV4(SYFRQCR, 12, 0x6fff, 0), + [DIV4_ZD] = DIV4(SYFRQCR, 8, 0x6fff, 0), + [DIV4_HP] = DIV4(SYFRQCR, 4, 0x6fff, 0), + [DIV4_ZS] = DIV4(CMFRQCR, 12, 0x6fff, 0), + [DIV4_ZB] = DIV4(CMFRQCR, 8, 0x6fff, 0), + [DIV4_ZB3] = DIV4(CMFRQCR, 4, 0x6fff, 0), + [DIV4_CP] = DIV4(CMFRQCR, 0, 0x6fff, 0), }; -/* a static usb0 for now - enough to get r8a66597 working */ -static struct clk usb0_clk = { - .name = "usb0", +enum { DIV6_SUB, DIV6_SIUA, DIV6_SIUB, DIV6_MSU, DIV6_SPU, + DIV6_MVI3, DIV6_MF1, DIV6_MF2, + DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_VOU, + DIV6_NR }; + +static struct clk div6_clks[DIV6_NR] = { + [DIV6_SUB] = SH_CLK_DIV6(&sh7367_extal2_clk, SUBUSBCKCR, 0), + [DIV6_SIUA] = SH_CLK_DIV6(&pllc1_div2_clk, SCLKACR, 0), + [DIV6_SIUB] = SH_CLK_DIV6(&pllc1_div2_clk, SCLKBCR, 0), + [DIV6_MSU] = SH_CLK_DIV6(&pllc1_div2_clk, MSUCKCR, 0), + [DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0), + [DIV6_MVI3] = SH_CLK_DIV6(&pllc1_div2_clk, MVI3CKCR, 0), + [DIV6_MF1] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK1CR, 0), + [DIV6_MF2] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK2CR, 0), + [DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0), + [DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0), + [DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0), + [DIV6_VOU] = SH_CLK_DIV6(&pllc1_div2_clk, VOUCKCR, 0), }; -/* a static keysc0 clk for now - enough to get sh_keysc working */ -static struct clk keysc0_clk = { - .name = "keysc0", +enum { RTMSTP001, + RTMSTP231, RTMSTP230, RTMSTP229, RTMSTP228, RTMSTP226, + RTMSTP216, RTMSTP206, RTMSTP205, RTMSTP201, + SYMSTP023, SYMSTP007, SYMSTP006, SYMSTP004, + SYMSTP003, SYMSTP002, SYMSTP001, SYMSTP000, + SYMSTP231, SYMSTP229, SYMSTP225, SYMSTP223, SYMSTP222, + SYMSTP215, SYMSTP214, SYMSTP213, SYMSTP211, + CMMSTP003, + MSTP_NR }; + +#define MSTP(_parent, _reg, _bit, _flags) \ + SH_CLK_MSTP32(_parent, _reg, _bit, _flags) + +static struct clk mstp_clks[MSTP_NR] = { + [RTMSTP001] = MSTP(&div6_clks[DIV6_SUB], RTMSTPCR0, 1, 0), /* IIC2 */ + [RTMSTP231] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 31, 0), /* VEU3 */ + [RTMSTP230] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 30, 0), /* VEU2 */ + [RTMSTP229] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 29, 0), /* VEU1 */ + [RTMSTP228] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 28, 0), /* VEU0 */ + [RTMSTP226] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 26, 0), /* VEU2H */ + [RTMSTP216] = MSTP(&div6_clks[DIV6_SUB], RTMSTPCR2, 16, 0), /* IIC0 */ + [RTMSTP206] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 6, 0), /* JPU */ + [RTMSTP205] = MSTP(&div6_clks[DIV6_VOU], RTMSTPCR2, 5, 0), /* VOU */ + [RTMSTP201] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 1, 0), /* VPU */ + [SYMSTP023] = MSTP(&div6_clks[DIV6_SPU], SYMSTPCR0, 23, 0), /* SPU1 */ + [SYMSTP007] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 7, 0), /* SCIFA5 */ + [SYMSTP006] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 6, 0), /* SCIFB */ + [SYMSTP004] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 4, 0), /* SCIFA0 */ + [SYMSTP003] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 3, 0), /* SCIFA1 */ + [SYMSTP002] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 2, 0), /* SCIFA2 */ + [SYMSTP001] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 1, 0), /* SCIFA3 */ + [SYMSTP000] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 0, 0), /* SCIFA4 */ + [SYMSTP231] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 31, 0), /* SIU */ + [SYMSTP229] = MSTP(&r_clk, SYMSTPCR2, 29, 0), /* CMT10 */ + [SYMSTP225] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 25, 0), /* IRDA */ + [SYMSTP223] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 23, 0), /* IIC1 */ + [SYMSTP222] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 22, 0), /* USBHS */ + [SYMSTP215] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 15, 0), /* FLCTL */ + [SYMSTP214] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 14, 0), /* SDHI0 */ + [SYMSTP213] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 13, 0), /* SDHI1 */ + [SYMSTP211] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 11, 0), /* SDHI2 */ + [CMMSTP003] = MSTP(&r_clk, CMMSTPCR0, 3, 0), /* KEYSC */ }; +#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk } +#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk } + static struct clk_lookup lookups[] = { - { - .clk = &peripheral_clk, - }, { - .clk = &r_clk, - }, { - .clk = &usb0_clk, - }, { - .clk = &keysc0_clk, - } + /* main clocks */ + CLKDEV_CON_ID("r_clk", &r_clk), + CLKDEV_CON_ID("extalb1", &sh7367_extalb1_clk), + CLKDEV_CON_ID("extal2", &sh7367_extal2_clk), + CLKDEV_CON_ID("extalb1_div2_clk", &extalb1_div2_clk), + CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk), + CLKDEV_CON_ID("pllc1_clk", &pllc1_clk), + CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk), + CLKDEV_CON_ID("pllc2_clk", &pllc2_clk), + + /* DIV4 clocks */ + CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]), + CLKDEV_CON_ID("g_clk", &div4_clks[DIV4_G]), + CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]), + CLKDEV_CON_ID("zx_clk", &div4_clks[DIV4_ZX]), + CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]), + CLKDEV_CON_ID("z_clk", &div4_clks[DIV4_Z]), + CLKDEV_CON_ID("zd_clk", &div4_clks[DIV4_ZD]), + CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]), + CLKDEV_CON_ID("zs_clk", &div4_clks[DIV4_ZS]), + CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]), + CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]), + CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]), + + /* DIV6 clocks */ + CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]), + CLKDEV_CON_ID("siua_clk", &div6_clks[DIV6_SIUA]), + CLKDEV_CON_ID("siub_clk", &div6_clks[DIV6_SIUB]), + CLKDEV_CON_ID("msu_clk", &div6_clks[DIV6_MSU]), + CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]), + CLKDEV_CON_ID("mvi3_clk", &div6_clks[DIV6_MVI3]), + CLKDEV_CON_ID("mf1_clk", &div6_clks[DIV6_MF1]), + CLKDEV_CON_ID("mf2_clk", &div6_clks[DIV6_MF2]), + CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]), + CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]), + CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]), + CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]), + + /* MSTP32 clocks */ + CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[RTMSTP001]), /* IIC2 */ + CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[RTMSTP231]), /* VEU3 */ + CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[RTMSTP230]), /* VEU2 */ + CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[RTMSTP229]), /* VEU1 */ + CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[RTMSTP228]), /* VEU0 */ + CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[RTMSTP226]), /* VEU2H */ + CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[RTMSTP216]), /* IIC0 */ + CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[RTMSTP206]), /* JPU */ + CLKDEV_DEV_ID("sh-vou", &mstp_clks[RTMSTP205]), /* VOU */ + CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[RTMSTP201]), /* VPU */ + CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[SYMSTP023]), /* SPU1 */ + CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[SYMSTP007]), /* SCIFA5 */ + CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[SYMSTP006]), /* SCIFB */ + CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[SYMSTP004]), /* SCIFA0 */ + CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[SYMSTP003]), /* SCIFA1 */ + CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[SYMSTP002]), /* SCIFA2 */ + CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[SYMSTP001]), /* SCIFA3 */ + CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[SYMSTP000]), /* SCIFA4 */ + CLKDEV_DEV_ID("sh_siu", &mstp_clks[SYMSTP231]), /* SIU */ + CLKDEV_CON_ID("cmt1", &mstp_clks[SYMSTP229]), /* CMT10 */ + CLKDEV_DEV_ID("sh_irda", &mstp_clks[SYMSTP225]), /* IRDA */ + CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[SYMSTP223]), /* IIC1 */ + CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[SYMSTP222]), /* USBHS */ + CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[SYMSTP222]), /* USBHS */ + CLKDEV_DEV_ID("sh_flctl", &mstp_clks[SYMSTP215]), /* FLCTL */ + CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[SYMSTP214]), /* SDHI0 */ + CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[SYMSTP213]), /* SDHI1 */ + CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[SYMSTP211]), /* SDHI2 */ + CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[CMMSTP003]), /* KEYSC */ }; void __init sh7367_clock_init(void) { - int i; + int k, ret = 0; + + for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) + ret = clk_register(main_clks[k]); + + if (!ret) + ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); + + if (!ret) + ret = sh_clk_div6_register(div6_clks, DIV6_NR); + + if (!ret) + ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - for (i = 0; i < ARRAY_SIZE(lookups); i++) { - lookups[i].con_id = lookups[i].clk->name; - clkdev_add(&lookups[i]); - } + if (!ret) + clk_init(); + else + panic("failed to setup sh7367 clocks\n"); } diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c new file mode 100644 index 000000000000..fb4e9b1d788e --- /dev/null +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -0,0 +1,560 @@ +/* + * SH7372 clock framework support + * + * Copyright (C) 2010 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/sh_clk.h> +#include <mach/common.h> +#include <asm/clkdev.h> + +/* SH7372 registers */ +#define FRQCRA 0xe6150000 +#define FRQCRB 0xe6150004 +#define FRQCRC 0xe61500e0 +#define FRQCRD 0xe61500e4 +#define VCLKCR1 0xe6150008 +#define VCLKCR2 0xe615000c +#define VCLKCR3 0xe615001c +#define FMSICKCR 0xe6150010 +#define FMSOCKCR 0xe6150014 +#define FSIACKCR 0xe6150018 +#define FSIBCKCR 0xe6150090 +#define SUBCKCR 0xe6150080 +#define SPUCKCR 0xe6150084 +#define VOUCKCR 0xe6150088 +#define HDMICKCR 0xe6150094 +#define DSITCKCR 0xe6150060 +#define DSI0PCKCR 0xe6150064 +#define DSI1PCKCR 0xe6150098 +#define PLLC01CR 0xe6150028 +#define PLLC2CR 0xe615002c +#define SMSTPCR0 0xe6150130 +#define SMSTPCR1 0xe6150134 +#define SMSTPCR2 0xe6150138 +#define SMSTPCR3 0xe615013c +#define SMSTPCR4 0xe6150140 + +/* Platforms must set frequency on their DV_CLKI pin */ +struct clk dv_clki_clk = { +}; + +/* Fixed 32 KHz root clock from EXTALR pin */ +static struct clk r_clk = { + .rate = 32768, +}; + +/* + * 26MHz default rate for the EXTAL1 root input clock. + * If needed, reset this with clk_set_rate() from the platform code. + */ +struct clk sh7372_extal1_clk = { + .rate = 26000000, +}; + +/* + * 48MHz default rate for the EXTAL2 root input clock. + * If needed, reset this with clk_set_rate() from the platform code. + */ +struct clk sh7372_extal2_clk = { + .rate = 48000000, +}; + +/* A fixed divide-by-2 block */ +static unsigned long div2_recalc(struct clk *clk) +{ + return clk->parent->rate / 2; +} + +static struct clk_ops div2_clk_ops = { + .recalc = div2_recalc, +}; + +/* Divide dv_clki by two */ +struct clk dv_clki_div2_clk = { + .ops = &div2_clk_ops, + .parent = &dv_clki_clk, +}; + +/* Divide extal1 by two */ +static struct clk extal1_div2_clk = { + .ops = &div2_clk_ops, + .parent = &sh7372_extal1_clk, +}; + +/* Divide extal2 by two */ +static struct clk extal2_div2_clk = { + .ops = &div2_clk_ops, + .parent = &sh7372_extal2_clk, +}; + +/* Divide extal2 by four */ +static struct clk extal2_div4_clk = { + .ops = &div2_clk_ops, + .parent = &extal2_div2_clk, +}; + +/* PLLC0 and PLLC1 */ +static unsigned long pllc01_recalc(struct clk *clk) +{ + unsigned long mult = 1; + + if (__raw_readl(PLLC01CR) & (1 << 14)) + mult = (((__raw_readl(clk->enable_reg) >> 24) & 0x3f) + 1) * 2; + + return clk->parent->rate * mult; +} + +static struct clk_ops pllc01_clk_ops = { + .recalc = pllc01_recalc, +}; + +static struct clk pllc0_clk = { + .ops = &pllc01_clk_ops, + .flags = CLK_ENABLE_ON_INIT, + .parent = &extal1_div2_clk, + .enable_reg = (void __iomem *)FRQCRC, +}; + +static struct clk pllc1_clk = { + .ops = &pllc01_clk_ops, + .flags = CLK_ENABLE_ON_INIT, + .parent = &extal1_div2_clk, + .enable_reg = (void __iomem *)FRQCRA, +}; + +/* Divide PLLC1 by two */ +static struct clk pllc1_div2_clk = { + .ops = &div2_clk_ops, + .parent = &pllc1_clk, +}; + +/* PLLC2 */ + +/* Indices are important - they are the actual src selecting values */ +static struct clk *pllc2_parent[] = { + [0] = &extal1_div2_clk, + [1] = &extal2_div2_clk, + [2] = &dv_clki_div2_clk, +}; + +/* Only multipliers 20 * 2 to 46 * 2 are valid, last entry for CPUFREQ_TABLE_END */ +static struct cpufreq_frequency_table pllc2_freq_table[29]; + +static void pllc2_table_rebuild(struct clk *clk) +{ + int i; + + /* Initialise PLLC2 frequency table */ + for (i = 0; i < ARRAY_SIZE(pllc2_freq_table) - 2; i++) { + pllc2_freq_table[i].frequency = clk->parent->rate * (i + 20) * 2; + pllc2_freq_table[i].index = i; + } + + /* This is a special entry - switching PLL off makes it a repeater */ + pllc2_freq_table[i].frequency = clk->parent->rate; + pllc2_freq_table[i].index = i; + + pllc2_freq_table[++i].frequency = CPUFREQ_TABLE_END; + pllc2_freq_table[i].index = i; +} + +static unsigned long pllc2_recalc(struct clk *clk) +{ + unsigned long mult = 1; + + pllc2_table_rebuild(clk); + + /* + * If the PLL is off, mult == 1, clk->rate will be updated in + * pllc2_enable(). + */ + if (__raw_readl(PLLC2CR) & (1 << 31)) + mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2; + + return clk->parent->rate * mult; +} + +static long pllc2_round_rate(struct clk *clk, unsigned long rate) +{ + return clk_rate_table_round(clk, clk->freq_table, rate); +} + +static int pllc2_enable(struct clk *clk) +{ + int i; + + __raw_writel(__raw_readl(PLLC2CR) | 0x80000000, PLLC2CR); + + for (i = 0; i < 100; i++) + if (__raw_readl(PLLC2CR) & 0x80000000) { + clk->rate = pllc2_recalc(clk); + return 0; + } + + pr_err("%s(): timeout!\n", __func__); + + return -ETIMEDOUT; +} + +static void pllc2_disable(struct clk *clk) +{ + __raw_writel(__raw_readl(PLLC2CR) & ~0x80000000, PLLC2CR); +} + +static int pllc2_set_rate(struct clk *clk, + unsigned long rate, int algo_id) +{ + unsigned long value; + int idx; + + idx = clk_rate_table_find(clk, clk->freq_table, rate); + if (idx < 0) + return idx; + + if (rate == clk->parent->rate) { + pllc2_disable(clk); + return 0; + } + + value = __raw_readl(PLLC2CR) & ~(0x3f << 24); + + if (value & 0x80000000) + pllc2_disable(clk); + + __raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR); + + if (value & 0x80000000) + return pllc2_enable(clk); + + return 0; +} + +static int pllc2_set_parent(struct clk *clk, struct clk *parent) +{ + u32 value; + int ret, i; + + if (!clk->parent_table || !clk->parent_num) + return -EINVAL; + + /* Search the parent */ + for (i = 0; i < clk->parent_num; i++) + if (clk->parent_table[i] == parent) + break; + + if (i == clk->parent_num) + return -ENODEV; + + ret = clk_reparent(clk, parent); + if (ret < 0) + return ret; + + value = __raw_readl(PLLC2CR) & ~(3 << 6); + + __raw_writel(value | (i << 6), PLLC2CR); + + /* Rebiuld the frequency table */ + pllc2_table_rebuild(clk); + + return 0; +} + +static struct clk_ops pllc2_clk_ops = { + .recalc = pllc2_recalc, + .round_rate = pllc2_round_rate, + .set_rate = pllc2_set_rate, + .enable = pllc2_enable, + .disable = pllc2_disable, + .set_parent = pllc2_set_parent, +}; + +struct clk pllc2_clk = { + .ops = &pllc2_clk_ops, + .flags = CLK_ENABLE_ON_INIT, + .parent = &extal1_div2_clk, + .freq_table = pllc2_freq_table, + .parent_table = pllc2_parent, + .parent_num = ARRAY_SIZE(pllc2_parent), +}; + +static struct clk *main_clks[] = { + &dv_clki_clk, + &r_clk, + &sh7372_extal1_clk, + &sh7372_extal2_clk, + &dv_clki_div2_clk, + &extal1_div2_clk, + &extal2_div2_clk, + &extal2_div4_clk, + &pllc0_clk, + &pllc1_clk, + &pllc1_div2_clk, + &pllc2_clk, +}; + +static void div4_kick(struct clk *clk) +{ + unsigned long value; + + /* set KICK bit in FRQCRB to update hardware setting */ + value = __raw_readl(FRQCRB); + value |= (1 << 31); + __raw_writel(value, FRQCRB); +} + +static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, + 24, 32, 36, 48, 0, 72, 96, 0 }; + +static struct clk_div_mult_table div4_div_mult_table = { + .divisors = divisors, + .nr_divisors = ARRAY_SIZE(divisors), +}; + +static struct clk_div4_table div4_table = { + .div_mult_table = &div4_div_mult_table, + .kick = div4_kick, +}; + +enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_CSIR, + DIV4_ZTR, DIV4_ZT, DIV4_ZX, DIV4_HP, + DIV4_ISPB, DIV4_S, DIV4_ZB, DIV4_ZB3, DIV4_CP, + DIV4_DDRP, DIV4_NR }; + +#define DIV4(_reg, _bit, _mask, _flags) \ + SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags) + +static struct clk div4_clks[DIV4_NR] = { + [DIV4_I] = DIV4(FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT), + [DIV4_ZG] = DIV4(FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT), + [DIV4_B] = DIV4(FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT), + [DIV4_M1] = DIV4(FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT), + [DIV4_CSIR] = DIV4(FRQCRA, 0, 0x6fff, 0), + [DIV4_ZTR] = DIV4(FRQCRB, 20, 0x6fff, 0), + [DIV4_ZT] = DIV4(FRQCRB, 16, 0x6fff, 0), + [DIV4_ZX] = DIV4(FRQCRB, 12, 0x6fff, 0), + [DIV4_HP] = DIV4(FRQCRB, 4, 0x6fff, 0), + [DIV4_ISPB] = DIV4(FRQCRC, 20, 0x6fff, 0), + [DIV4_S] = DIV4(FRQCRC, 12, 0x6fff, 0), + [DIV4_ZB] = DIV4(FRQCRC, 8, 0x6fff, 0), + [DIV4_ZB3] = DIV4(FRQCRC, 4, 0x6fff, 0), + [DIV4_CP] = DIV4(FRQCRC, 0, 0x6fff, 0), + [DIV4_DDRP] = DIV4(FRQCRD, 0, 0x677c, 0), +}; + +enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_FMSI, DIV6_FMSO, + DIV6_FSIA, DIV6_FSIB, DIV6_SUB, DIV6_SPU, + DIV6_VOU, DIV6_DSIT, DIV6_DSI0P, DIV6_DSI1P, + DIV6_NR }; + +static struct clk div6_clks[DIV6_NR] = { + [DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0), + [DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0), + [DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0), + [DIV6_FMSI] = SH_CLK_DIV6(&pllc1_div2_clk, FMSICKCR, 0), + [DIV6_FMSO] = SH_CLK_DIV6(&pllc1_div2_clk, FMSOCKCR, 0), + [DIV6_FSIA] = SH_CLK_DIV6(&pllc1_div2_clk, FSIACKCR, 0), + [DIV6_FSIB] = SH_CLK_DIV6(&pllc1_div2_clk, FSIBCKCR, 0), + [DIV6_SUB] = SH_CLK_DIV6(&sh7372_extal2_clk, SUBCKCR, 0), + [DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0), + [DIV6_VOU] = SH_CLK_DIV6(&pllc1_div2_clk, VOUCKCR, 0), + [DIV6_DSIT] = SH_CLK_DIV6(&pllc1_div2_clk, DSITCKCR, 0), + [DIV6_DSI0P] = SH_CLK_DIV6(&pllc1_div2_clk, DSI0PCKCR, 0), + [DIV6_DSI1P] = SH_CLK_DIV6(&pllc1_div2_clk, DSI1PCKCR, 0), +}; + +enum { DIV6_HDMI, DIV6_REPARENT_NR }; + +/* Indices are important - they are the actual src selecting values */ +static struct clk *hdmi_parent[] = { + [0] = &pllc1_div2_clk, + [1] = &pllc2_clk, + [2] = &dv_clki_clk, + [3] = NULL, /* pllc2_div4 not implemented yet */ +}; + +static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = { + [DIV6_HDMI] = SH_CLK_DIV6_EXT(&pllc1_div2_clk, HDMICKCR, 0, + hdmi_parent, ARRAY_SIZE(hdmi_parent), 6, 2), +}; + +enum { MSTP001, + MSTP131, MSTP130, + MSTP129, MSTP128, + MSTP118, MSTP117, MSTP116, + MSTP106, MSTP101, MSTP100, + MSTP223, + MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, + MSTP329, MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312, + MSTP415, MSTP413, MSTP411, MSTP410, MSTP406, MSTP403, + MSTP_NR }; + +#define MSTP(_parent, _reg, _bit, _flags) \ + SH_CLK_MSTP32(_parent, _reg, _bit, _flags) + +static struct clk mstp_clks[MSTP_NR] = { + [MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */ + [MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */ + [MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */ + [MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */ + [MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */ + [MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX */ + [MSTP117] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */ + [MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */ + [MSTP106] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 6, 0), /* JPU */ + [MSTP101] = MSTP(&div4_clks[DIV4_M1], SMSTPCR1, 1, 0), /* VPU */ + [MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */ + [MSTP223] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR2, 23, 0), /* SPU2 */ + [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ + [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ + [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ + [MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */ + [MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */ + [MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */ + [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ + [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ + [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, CLK_ENABLE_ON_INIT), /* FSIA */ + [MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */ + [MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */ + [MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */ + [MSTP313] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */ + [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMC */ + [MSTP415] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 15, 0), /* SDHI2 */ + [MSTP413] = MSTP(&pllc1_div2_clk, SMSTPCR4, 13, 0), /* HDMI */ + [MSTP411] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 11, 0), /* IIC3 */ + [MSTP410] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 10, 0), /* IIC4 */ + [MSTP406] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 6, 0), /* USB1 */ + [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ +}; + +#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk } +#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk } + +static struct clk_lookup lookups[] = { + /* main clocks */ + CLKDEV_CON_ID("dv_clki_div2_clk", &dv_clki_div2_clk), + CLKDEV_CON_ID("r_clk", &r_clk), + CLKDEV_CON_ID("extal1", &sh7372_extal1_clk), + CLKDEV_CON_ID("extal2", &sh7372_extal2_clk), + CLKDEV_CON_ID("extal1_div2_clk", &extal1_div2_clk), + CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk), + CLKDEV_CON_ID("extal2_div4_clk", &extal2_div4_clk), + CLKDEV_CON_ID("pllc0_clk", &pllc0_clk), + CLKDEV_CON_ID("pllc1_clk", &pllc1_clk), + CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk), + CLKDEV_CON_ID("pllc2_clk", &pllc2_clk), + + /* DIV4 clocks */ + CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]), + CLKDEV_CON_ID("zg_clk", &div4_clks[DIV4_ZG]), + CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]), + CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]), + CLKDEV_CON_ID("csir_clk", &div4_clks[DIV4_CSIR]), + CLKDEV_CON_ID("ztr_clk", &div4_clks[DIV4_ZTR]), + CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]), + CLKDEV_CON_ID("zx_clk", &div4_clks[DIV4_ZX]), + CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]), + CLKDEV_CON_ID("ispb_clk", &div4_clks[DIV4_ISPB]), + CLKDEV_CON_ID("s_clk", &div4_clks[DIV4_S]), + CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]), + CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]), + CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]), + CLKDEV_CON_ID("ddrp_clk", &div4_clks[DIV4_DDRP]), + + /* DIV6 clocks */ + CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]), + CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]), + CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]), + CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]), + CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]), + CLKDEV_CON_ID("fsia_clk", &div6_clks[DIV6_FSIA]), + CLKDEV_CON_ID("fsib_clk", &div6_clks[DIV6_FSIB]), + CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]), + CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]), + CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]), + CLKDEV_CON_ID("hdmi_clk", &div6_reparent_clks[DIV6_HDMI]), + CLKDEV_CON_ID("dsit_clk", &div6_clks[DIV6_DSIT]), + CLKDEV_CON_ID("dsi0p_clk", &div6_clks[DIV6_DSI0P]), + CLKDEV_CON_ID("dsi1p_clk", &div6_clks[DIV6_DSI1P]), + + /* MSTP32 clocks */ + CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */ + CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */ + CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */ + CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */ + CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */ + CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */ + CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */ + CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */ + CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[MSTP106]), /* JPU */ + CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[MSTP101]), /* VPU */ + CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */ + CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[MSTP223]), /* SPU2DSP0 */ + CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[MSTP223]), /* SPU2DSP1 */ + CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ + CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP206]), /* SCIFB */ + CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ + CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */ + CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */ + CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */ + CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ + CLKDEV_CON_ID("cmt1", &mstp_clks[MSTP329]), /* CMT10 */ + CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */ + CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */ + CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */ + CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP323]), /* USB0 */ + CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ + CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ + CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */ + CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]), /* SDHI2 */ + CLKDEV_DEV_ID("sh-mobile-hdmi", &mstp_clks[MSTP413]), /* HDMI */ + CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* IIC3 */ + CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* IIC4 */ + CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */ + CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */ + CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ + {.con_id = "ick", .dev_id = "sh-mobile-hdmi", .clk = &div6_reparent_clks[DIV6_HDMI]}, +}; + +void __init sh7372_clock_init(void) +{ + int k, ret = 0; + + for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) + ret = clk_register(main_clks[k]); + + if (!ret) + ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); + + if (!ret) + ret = sh_clk_div6_register(div6_clks, DIV6_NR); + + if (!ret) + ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_NR); + + if (!ret) + ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + + if (!ret) + clk_init(); + else + panic("failed to setup sh7372 clocks\n"); + +} diff --git a/arch/arm/mach-shmobile/clock-sh7377.c b/arch/arm/mach-shmobile/clock-sh7377.c new file mode 100644 index 000000000000..e007c28cf0a8 --- /dev/null +++ b/arch/arm/mach-shmobile/clock-sh7377.c @@ -0,0 +1,369 @@ +/* + * SH7377 clock framework support + * + * Copyright (C) 2010 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/sh_clk.h> +#include <mach/common.h> +#include <asm/clkdev.h> + +/* SH7377 registers */ +#define RTFRQCR 0xe6150000 +#define SYFRQCR 0xe6150004 +#define CMFRQCR 0xe61500E0 +#define VCLKCR1 0xe6150008 +#define VCLKCR2 0xe615000C +#define VCLKCR3 0xe615001C +#define FMSICKCR 0xe6150010 +#define FMSOCKCR 0xe6150014 +#define FSICKCR 0xe6150018 +#define PLLC1CR 0xe6150028 +#define PLLC2CR 0xe615002C +#define SUBUSBCKCR 0xe6150080 +#define SPUCKCR 0xe6150084 +#define MSUCKCR 0xe6150088 +#define MVI3CKCR 0xe6150090 +#define HDMICKCR 0xe6150094 +#define MFCK1CR 0xe6150098 +#define MFCK2CR 0xe615009C +#define DSITCKCR 0xe6150060 +#define DSIPCKCR 0xe6150064 +#define SMSTPCR0 0xe6150130 +#define SMSTPCR1 0xe6150134 +#define SMSTPCR2 0xe6150138 +#define SMSTPCR3 0xe615013C +#define SMSTPCR4 0xe6150140 + +/* Fixed 32 KHz root clock from EXTALR pin */ +static struct clk r_clk = { + .rate = 32768, +}; + +/* + * 26MHz default rate for the EXTALC1 root input clock. + * If needed, reset this with clk_set_rate() from the platform code. + */ +struct clk sh7377_extalc1_clk = { + .rate = 26666666, +}; + +/* + * 48MHz default rate for the EXTAL2 root input clock. + * If needed, reset this with clk_set_rate() from the platform code. + */ +struct clk sh7377_extal2_clk = { + .rate = 48000000, +}; + +/* A fixed divide-by-2 block */ +static unsigned long div2_recalc(struct clk *clk) +{ + return clk->parent->rate / 2; +} + +static struct clk_ops div2_clk_ops = { + .recalc = div2_recalc, +}; + +/* Divide extalc1 by two */ +static struct clk extalc1_div2_clk = { + .ops = &div2_clk_ops, + .parent = &sh7377_extalc1_clk, +}; + +/* Divide extal2 by two */ +static struct clk extal2_div2_clk = { + .ops = &div2_clk_ops, + .parent = &sh7377_extal2_clk, +}; + +/* Divide extal2 by four */ +static struct clk extal2_div4_clk = { + .ops = &div2_clk_ops, + .parent = &extal2_div2_clk, +}; + +/* PLLC1 */ +static unsigned long pllc1_recalc(struct clk *clk) +{ + unsigned long mult = 1; + + if (__raw_readl(PLLC1CR) & (1 << 14)) + mult = (((__raw_readl(RTFRQCR) >> 24) & 0x3f) + 1) * 2; + + return clk->parent->rate * mult; +} + +static struct clk_ops pllc1_clk_ops = { + .recalc = pllc1_recalc, +}; + +static struct clk pllc1_clk = { + .ops = &pllc1_clk_ops, + .flags = CLK_ENABLE_ON_INIT, + .parent = &extalc1_div2_clk, +}; + +/* Divide PLLC1 by two */ +static struct clk pllc1_div2_clk = { + .ops = &div2_clk_ops, + .parent = &pllc1_clk, +}; + +/* PLLC2 */ +static unsigned long pllc2_recalc(struct clk *clk) +{ + unsigned long mult = 1; + + if (__raw_readl(PLLC2CR) & (1 << 31)) + mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2; + + return clk->parent->rate * mult; +} + +static struct clk_ops pllc2_clk_ops = { + .recalc = pllc2_recalc, +}; + +static struct clk pllc2_clk = { + .ops = &pllc2_clk_ops, + .flags = CLK_ENABLE_ON_INIT, + .parent = &extalc1_div2_clk, +}; + +static struct clk *main_clks[] = { + &r_clk, + &sh7377_extalc1_clk, + &sh7377_extal2_clk, + &extalc1_div2_clk, + &extal2_div2_clk, + &extal2_div4_clk, + &pllc1_clk, + &pllc1_div2_clk, + &pllc2_clk, +}; + +static void div4_kick(struct clk *clk) +{ + unsigned long value; + + /* set KICK bit in SYFRQCR to update hardware setting */ + value = __raw_readl(SYFRQCR); + value |= (1 << 31); + __raw_writel(value, SYFRQCR); +} + +static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, + 24, 32, 36, 48, 0, 72, 96, 0 }; + +static struct clk_div_mult_table div4_div_mult_table = { + .divisors = divisors, + .nr_divisors = ARRAY_SIZE(divisors), +}; + +static struct clk_div4_table div4_table = { + .div_mult_table = &div4_div_mult_table, + .kick = div4_kick, +}; + +enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_CSIR, + DIV4_ZTR, DIV4_ZT, DIV4_Z, DIV4_HP, + DIV4_ZS, DIV4_ZB, DIV4_ZB3, DIV4_CP, DIV4_NR }; + +#define DIV4(_reg, _bit, _mask, _flags) \ + SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags) + +static struct clk div4_clks[DIV4_NR] = { + [DIV4_I] = DIV4(RTFRQCR, 20, 0x6fff, CLK_ENABLE_ON_INIT), + [DIV4_ZG] = DIV4(RTFRQCR, 16, 0x6fff, CLK_ENABLE_ON_INIT), + [DIV4_B] = DIV4(RTFRQCR, 8, 0x6fff, CLK_ENABLE_ON_INIT), + [DIV4_M1] = DIV4(RTFRQCR, 4, 0x6fff, CLK_ENABLE_ON_INIT), + [DIV4_CSIR] = DIV4(RTFRQCR, 0, 0x6fff, 0), + [DIV4_ZTR] = DIV4(SYFRQCR, 20, 0x6fff, 0), + [DIV4_ZT] = DIV4(SYFRQCR, 16, 0x6fff, 0), + [DIV4_Z] = DIV4(SYFRQCR, 12, 0x6fff, 0), + [DIV4_HP] = DIV4(SYFRQCR, 4, 0x6fff, 0), + [DIV4_ZS] = DIV4(CMFRQCR, 12, 0x6fff, 0), + [DIV4_ZB] = DIV4(CMFRQCR, 8, 0x6fff, 0), + [DIV4_ZB3] = DIV4(CMFRQCR, 4, 0x6fff, 0), + [DIV4_CP] = DIV4(CMFRQCR, 0, 0x6fff, 0), +}; + +enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_FMSI, DIV6_FMSO, + DIV6_FSI, DIV6_SUB, DIV6_SPU, DIV6_MSU, DIV6_MVI3, DIV6_HDMI, + DIV6_MF1, DIV6_MF2, DIV6_DSIT, DIV6_DSIP, + DIV6_NR }; + +static struct clk div6_clks[] = { + [DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0), + [DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0), + [DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0), + [DIV6_FMSI] = SH_CLK_DIV6(&pllc1_div2_clk, FMSICKCR, 0), + [DIV6_FMSO] = SH_CLK_DIV6(&pllc1_div2_clk, FMSOCKCR, 0), + [DIV6_FSI] = SH_CLK_DIV6(&pllc1_div2_clk, FSICKCR, 0), + [DIV6_SUB] = SH_CLK_DIV6(&sh7377_extal2_clk, SUBUSBCKCR, 0), + [DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0), + [DIV6_MSU] = SH_CLK_DIV6(&pllc1_div2_clk, MSUCKCR, 0), + [DIV6_MVI3] = SH_CLK_DIV6(&pllc1_div2_clk, MVI3CKCR, 0), + [DIV6_HDMI] = SH_CLK_DIV6(&pllc1_div2_clk, HDMICKCR, 0), + [DIV6_MF1] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK1CR, 0), + [DIV6_MF2] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK2CR, 0), + [DIV6_DSIT] = SH_CLK_DIV6(&pllc1_div2_clk, DSITCKCR, 0), + [DIV6_DSIP] = SH_CLK_DIV6(&pllc1_div2_clk, DSIPCKCR, 0), +}; + +enum { MSTP001, + MSTP131, MSTP130, MSTP129, MSTP128, MSTP116, MSTP106, MSTP101, + MSTP223, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, + MSTP331, MSTP329, MSTP325, MSTP323, MSTP322, + MSTP315, MSTP314, MSTP313, + MSTP403, + MSTP_NR }; + +#define MSTP(_parent, _reg, _bit, _flags) \ + SH_CLK_MSTP32(_parent, _reg, _bit, _flags) + +static struct clk mstp_clks[] = { + [MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */ + [MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */ + [MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */ + [MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */ + [MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */ + [MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */ + [MSTP106] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 6, 0), /* JPU */ + [MSTP101] = MSTP(&div4_clks[DIV4_M1], SMSTPCR1, 1, 0), /* VPU */ + [MSTP223] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR2, 23, 0), /* SPU2 */ + [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ + [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ + [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ + [MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */ + [MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */ + [MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */ + [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ + [MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */ + [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ + [MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IRDA */ + [MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */ + [MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */ + [MSTP315] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 15, 0), /* FLCTL */ + [MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */ + [MSTP313] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */ + [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ +}; + +#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk } +#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk } + +static struct clk_lookup lookups[] = { + /* main clocks */ + CLKDEV_CON_ID("r_clk", &r_clk), + CLKDEV_CON_ID("extalc1", &sh7377_extalc1_clk), + CLKDEV_CON_ID("extal2", &sh7377_extal2_clk), + CLKDEV_CON_ID("extalc1_div2_clk", &extalc1_div2_clk), + CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk), + CLKDEV_CON_ID("extal2_div4_clk", &extal2_div4_clk), + CLKDEV_CON_ID("pllc1_clk", &pllc1_clk), + CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk), + CLKDEV_CON_ID("pllc2_clk", &pllc2_clk), + + /* DIV4 clocks */ + CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]), + CLKDEV_CON_ID("zg_clk", &div4_clks[DIV4_ZG]), + CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]), + CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]), + CLKDEV_CON_ID("csir_clk", &div4_clks[DIV4_CSIR]), + CLKDEV_CON_ID("ztr_clk", &div4_clks[DIV4_ZTR]), + CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]), + CLKDEV_CON_ID("z_clk", &div4_clks[DIV4_Z]), + CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]), + CLKDEV_CON_ID("zs_clk", &div4_clks[DIV4_ZS]), + CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]), + CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]), + CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]), + + /* DIV6 clocks */ + CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]), + CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]), + CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]), + CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]), + CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]), + CLKDEV_CON_ID("fsi_clk", &div6_clks[DIV6_FSI]), + CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]), + CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]), + CLKDEV_CON_ID("msu_clk", &div6_clks[DIV6_MSU]), + CLKDEV_CON_ID("mvi3_clk", &div6_clks[DIV6_MVI3]), + CLKDEV_CON_ID("hdmi_clk", &div6_clks[DIV6_HDMI]), + CLKDEV_CON_ID("mf1_clk", &div6_clks[DIV6_MF1]), + CLKDEV_CON_ID("mf2_clk", &div6_clks[DIV6_MF2]), + CLKDEV_CON_ID("dsit_clk", &div6_clks[DIV6_DSIT]), + CLKDEV_CON_ID("dsip_clk", &div6_clks[DIV6_DSIP]), + + /* MSTP32 clocks */ + CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */ + CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */ + CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */ + CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */ + CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */ + CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */ + CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[MSTP106]), /* JPU */ + CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[MSTP101]), /* VPU */ + CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[MSTP223]), /* SPU2DSP0 */ + CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[MSTP223]), /* SPU2DSP1 */ + CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ + CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP206]), /* SCIFB */ + CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ + CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */ + CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */ + CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */ + CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ + CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */ + CLKDEV_CON_ID("cmt1", &mstp_clks[MSTP329]), /* CMT10 */ + CLKDEV_DEV_ID("sh_irda", &mstp_clks[MSTP325]), /* IRDA */ + CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */ + CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USBHS */ + CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USBHS */ + CLKDEV_DEV_ID("sh_flctl", &mstp_clks[MSTP315]), /* FLCTL */ + CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ + CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ + CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ +}; + +void __init sh7377_clock_init(void) +{ + int k, ret = 0; + + for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) + ret = clk_register(main_clks[k]); + + if (!ret) + ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); + + if (!ret) + ret = sh_clk_div6_register(div6_clks, DIV6_NR); + + if (!ret) + ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + + if (!ret) + clk_init(); + else + panic("failed to setup sh7377 clocks\n"); +} diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c new file mode 100644 index 000000000000..b7c705a213a2 --- /dev/null +++ b/arch/arm/mach-shmobile/clock.c @@ -0,0 +1,44 @@ +/* + * SH-Mobile Timer + * + * Copyright (C) 2010 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sh_clk.h> + +int __init clk_init(void) +{ + /* Kick the child clocks.. */ + recalculate_root_clocks(); + + /* Enable the necessary init clocks */ + clk_enable_init_clocks(); + + return 0; +} + +int __clk_get(struct clk *clk) +{ + return 1; +} +EXPORT_SYMBOL(__clk_get); + +void __clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(__clk_put); diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index 57903605cc51..efeef778a875 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -3,21 +3,31 @@ extern struct sys_timer shmobile_timer; extern void shmobile_setup_console(void); +struct clk; +extern int clk_init(void); extern void sh7367_init_irq(void); extern void sh7367_add_early_devices(void); extern void sh7367_add_standard_devices(void); extern void sh7367_clock_init(void); extern void sh7367_pinmux_init(void); +extern struct clk sh7367_extalb1_clk; +extern struct clk sh7367_extal2_clk; extern void sh7377_init_irq(void); extern void sh7377_add_early_devices(void); extern void sh7377_add_standard_devices(void); +extern void sh7377_clock_init(void); extern void sh7377_pinmux_init(void); +extern struct clk sh7377_extalc1_clk; +extern struct clk sh7377_extal2_clk; extern void sh7372_init_irq(void); extern void sh7372_add_early_devices(void); extern void sh7372_add_standard_devices(void); +extern void sh7372_clock_init(void); extern void sh7372_pinmux_init(void); +extern struct clk sh7372_extal1_clk; +extern struct clk sh7372_extal2_clk; #endif /* __ARCH_MACH_COMMON_H */ diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h index 132256bb8c81..fa15b5f8a001 100644 --- a/arch/arm/mach-shmobile/include/mach/irqs.h +++ b/arch/arm/mach-shmobile/include/mach/irqs.h @@ -3,7 +3,13 @@ #define NR_IRQS 512 +/* INTCA */ #define evt2irq(evt) (((evt) >> 5) - 16) #define irq2evt(irq) (((irq) + 16) << 5) +/* INTCS */ +#define INTCS_VECT_BASE 0x2200 +#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect)) +#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt)) + #endif /* __ASM_MACH_IRQS_H */ diff --git a/arch/arm/mach-shmobile/include/mach/memory.h b/arch/arm/mach-shmobile/include/mach/memory.h index e188183f4dce..377584e57e03 100644 --- a/arch/arm/mach-shmobile/include/mach/memory.h +++ b/arch/arm/mach-shmobile/include/mach/memory.h @@ -4,4 +4,7 @@ #define PHYS_OFFSET UL(CONFIG_MEMORY_START) #define MEM_SIZE UL(CONFIG_MEMORY_SIZE) +/* DMA memory at 0xf6000000 - 0xffdfffff */ +#define CONSISTENT_DMA_SIZE (158 << 20) + #endif /* __ASM_MACH_MEMORY_H */ diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index dc34f00c56b8..33e9700ded7e 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -11,6 +11,8 @@ #ifndef __ASM_SH7372_H__ #define __ASM_SH7372_H__ +#include <linux/sh_clk.h> + /* * Pin Function Controller: * GPIO_FN_xx - GPIO used to select pin function @@ -431,4 +433,32 @@ enum { GPIO_FN_SDENC_DV_CLKI, }; +/* DMA slave IDs */ +enum { + SHDMA_SLAVE_SCIF0_TX, + SHDMA_SLAVE_SCIF0_RX, + SHDMA_SLAVE_SCIF1_TX, + SHDMA_SLAVE_SCIF1_RX, + SHDMA_SLAVE_SCIF2_TX, + SHDMA_SLAVE_SCIF2_RX, + SHDMA_SLAVE_SCIF3_TX, + SHDMA_SLAVE_SCIF3_RX, + SHDMA_SLAVE_SCIF4_TX, + SHDMA_SLAVE_SCIF4_RX, + SHDMA_SLAVE_SCIF5_TX, + SHDMA_SLAVE_SCIF5_RX, + SHDMA_SLAVE_SCIF6_TX, + SHDMA_SLAVE_SCIF6_RX, + SHDMA_SLAVE_SDHI0_RX, + SHDMA_SLAVE_SDHI0_TX, + SHDMA_SLAVE_SDHI1_RX, + SHDMA_SLAVE_SDHI1_TX, + SHDMA_SLAVE_SDHI2_RX, + SHDMA_SLAVE_SDHI2_TX, +}; + +extern struct clk dv_clki_clk; +extern struct clk dv_clki_div2_clk; +extern struct clk pllc2_clk; + #endif /* __ASM_SH7372_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/vmalloc.h b/arch/arm/mach-shmobile/include/mach/vmalloc.h index fb3c4f1ab252..4aecf6e3a859 100644 --- a/arch/arm/mach-shmobile/include/mach/vmalloc.h +++ b/arch/arm/mach-shmobile/include/mach/vmalloc.h @@ -1,6 +1,7 @@ #ifndef __ASM_MACH_VMALLOC_H #define __ASM_MACH_VMALLOC_H -#define VMALLOC_END (PAGE_OFFSET + 0x24000000) +/* Vmalloc at ... - 0xe5ffffff */ +#define VMALLOC_END 0xe6000000 #endif /* __ASM_MACH_VMALLOC_H */ diff --git a/arch/arm/mach-shmobile/intc-sh7367.c b/arch/arm/mach-shmobile/intc-sh7367.c index 5ff70cadfc32..1a20c489b20d 100644 --- a/arch/arm/mach-shmobile/intc-sh7367.c +++ b/arch/arm/mach-shmobile/intc-sh7367.c @@ -75,7 +75,7 @@ enum { ETM11, ARM11, USBHS, FLCTL, IIC1 }; -static struct intc_vect intca_vectors[] = { +static struct intc_vect intca_vectors[] __initdata = { INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220), INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260), INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0), @@ -162,7 +162,7 @@ static struct intc_group intca_groups[] __initdata = { INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1), }; -static struct intc_mask_reg intca_mask_registers[] = { +static struct intc_mask_reg intca_mask_registers[] __initdata = { { 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */ { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, { 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */ @@ -211,7 +211,7 @@ static struct intc_mask_reg intca_mask_registers[] = { MISTY, CMT3, RWDT1, RWDT0 } }, }; -static struct intc_prio_reg intca_prio_registers[] = { +static struct intc_prio_reg intca_prio_registers[] __initdata = { { 0xe6900010, 0, 32, 4, /* INTPRI00A */ { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, { 0xe6900014, 0, 32, 4, /* INTPRI10A */ @@ -263,8 +263,178 @@ static struct intc_desc intca_desc __initdata = { intca_sense_registers, intca_ack_registers), }; +enum { + UNUSED_INTCS = 0, + + INTCS, + + /* interrupt sources INTCS */ + VIO2_VEU0, VIO2_VEU1, VIO2_VEU2, VIO2_VEU3, + VIO3_VOU, + RTDMAC_1_DEI0, RTDMAC_1_DEI1, RTDMAC_1_DEI2, RTDMAC_1_DEI3, + VIO1_CEU, VIO1_BEU0, VIO1_BEU1, VIO1_BEU2, + VPU, + SGX530, + _2DDMAC_2DDM0, _2DDMAC_2DDM1, _2DDMAC_2DDM2, _2DDMAC_2DDM3, + IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2, + IPMMU_IPMMUB, IPMMU_IPMMUS, + RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR, + MSIOF, + IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0, + TMU_TUNI0, TMU_TUNI1, TMU_TUNI2, + CMT, + TSIF, + IPMMUI, + MVI3, + ICB, + PEP, + ASA, + BEM, + VE2HO, + HQE, + JPEG, + LCDC, + + /* interrupt groups INTCS */ + _2DDMAC, RTDMAC_1, RTDMAC_2, VEU, BEU, IIC0, IPMMU, IIC2, +}; + +static struct intc_vect intcs_vectors[] = { + INTCS_VECT(VIO2_VEU0, 0x700), INTCS_VECT(VIO2_VEU1, 0x720), + INTCS_VECT(VIO2_VEU2, 0x740), INTCS_VECT(VIO2_VEU3, 0x760), + INTCS_VECT(VIO3_VOU, 0x780), + INTCS_VECT(RTDMAC_1_DEI0, 0x800), INTCS_VECT(RTDMAC_1_DEI1, 0x820), + INTCS_VECT(RTDMAC_1_DEI2, 0x840), INTCS_VECT(RTDMAC_1_DEI3, 0x860), + INTCS_VECT(VIO1_CEU, 0x880), INTCS_VECT(VIO1_BEU0, 0x8a0), + INTCS_VECT(VIO1_BEU1, 0x8c0), INTCS_VECT(VIO1_BEU2, 0x8e0), + INTCS_VECT(VPU, 0x980), + INTCS_VECT(SGX530, 0x9e0), + INTCS_VECT(_2DDMAC_2DDM0, 0xa00), INTCS_VECT(_2DDMAC_2DDM1, 0xa20), + INTCS_VECT(_2DDMAC_2DDM2, 0xa40), INTCS_VECT(_2DDMAC_2DDM3, 0xa60), + INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0), + INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0), + INTCS_VECT(IPMMU_IPMMUB, 0xb20), INTCS_VECT(IPMMU_IPMMUS, 0xb60), + INTCS_VECT(RTDMAC_2_DEI4, 0xb80), INTCS_VECT(RTDMAC_2_DEI5, 0xba0), + INTCS_VECT(RTDMAC_2_DADERR, 0xbc0), + INTCS_VECT(MSIOF, 0xd20), + INTCS_VECT(IIC0_ALI0, 0xe00), INTCS_VECT(IIC0_TACKI0, 0xe20), + INTCS_VECT(IIC0_WAITI0, 0xe40), INTCS_VECT(IIC0_DTEI0, 0xe60), + INTCS_VECT(TMU_TUNI0, 0xe80), INTCS_VECT(TMU_TUNI1, 0xea0), + INTCS_VECT(TMU_TUNI2, 0xec0), + INTCS_VECT(CMT, 0xf00), + INTCS_VECT(TSIF, 0xf20), + INTCS_VECT(IPMMUI, 0xf60), + INTCS_VECT(MVI3, 0x420), + INTCS_VECT(ICB, 0x480), + INTCS_VECT(PEP, 0x4a0), + INTCS_VECT(ASA, 0x4c0), + INTCS_VECT(BEM, 0x4e0), + INTCS_VECT(VE2HO, 0x520), + INTCS_VECT(HQE, 0x540), + INTCS_VECT(JPEG, 0x560), + INTCS_VECT(LCDC, 0x580), + + INTC_VECT(INTCS, 0xf80), +}; + +static struct intc_group intcs_groups[] __initdata = { + INTC_GROUP(_2DDMAC, _2DDMAC_2DDM0, _2DDMAC_2DDM1, + _2DDMAC_2DDM2, _2DDMAC_2DDM3), + INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI0, RTDMAC_1_DEI1, + RTDMAC_1_DEI2, RTDMAC_1_DEI3), + INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR), + INTC_GROUP(VEU, VIO2_VEU0, VIO2_VEU1, VIO2_VEU2, VIO2_VEU3), + INTC_GROUP(BEU, VIO1_BEU0, VIO1_BEU1, VIO1_BEU2), + INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0), + INTC_GROUP(IPMMU, IPMMU_IPMMUS, IPMMU_IPMMUB), + INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2), +}; + +static struct intc_mask_reg intcs_mask_registers[] = { + { 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */ + { VIO1_BEU2, VIO1_BEU1, VIO1_BEU0, VIO1_CEU, + VIO2_VEU3, VIO2_VEU2, VIO2_VEU1, VIO2_VEU0 } }, + { 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */ + { VIO3_VOU, 0, VE2HO, VPU, + 0, 0, 0, 0 } }, + { 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */ + { _2DDMAC_2DDM3, _2DDMAC_2DDM2, _2DDMAC_2DDM1, _2DDMAC_2DDM0, + BEM, ASA, PEP, ICB } }, + { 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */ + { 0, 0, MVI3, 0, + JPEG, HQE, 0, LCDC } }, + { 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */ + { 0, RTDMAC_2_DADERR, RTDMAC_2_DEI5, RTDMAC_2_DEI4, + RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } }, + { 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */ + { 0, 0, MSIOF, 0, + SGX530, 0, 0, 0 } }, + { 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */ + { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0, + 0, 0, 0, 0 } }, + { 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */ + { 0, 0, 0, CMT, + IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } }, + { 0xffd201a8, 0xffd201e8, 8, /* IMR10SA / IMCR10SA */ + { IPMMU_IPMMUS, 0, IPMMU_IPMMUB, 0, + 0, 0, 0, 0 } }, + { 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */ + { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0, + 0, 0, IPMMUI, TSIF } }, + { 0xffd20104, 0, 16, /* INTAMASK */ + { 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, INTCS } }, +}; + +/* Priority is needed for INTCA to receive the INTCS interrupt */ +static struct intc_prio_reg intcs_prio_registers[] = { + { 0xffd20000, 0, 16, 4, /* IPRAS */ { 0, MVI3, _2DDMAC, ICB } }, + { 0xffd20004, 0, 16, 4, /* IPRBS */ { JPEG, LCDC, 0, 0 } }, + { 0xffd20008, 0, 16, 4, /* IPRCS */ { BBIF2, 0, 0, 0 } }, + { 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_1, VIO1_CEU, 0, VPU } }, + { 0xffd20014, 0, 16, 4, /* IPRFS */ { 0, RTDMAC_2, 0, CMT } }, + { 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU_TUNI0, TMU_TUNI1, + TMU_TUNI2, 0 } }, + { 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, VIO3_VOU, VEU, BEU } }, + { 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF, IIC0 } }, + { 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, SGX530, 0, 0 } }, + { 0xffd20028, 0, 16, 4, /* IPRKS */ { BEM, ASA, IPMMUI, PEP } }, + { 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, VE2HO, HQE } }, + { 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } }, +}; + +static struct resource intcs_resources[] __initdata = { + [0] = { + .start = 0xffd20000, + .end = 0xffd2ffff, + .flags = IORESOURCE_MEM, + } +}; + +static struct intc_desc intcs_desc __initdata = { + .name = "sh7367-intcs", + .resource = intcs_resources, + .num_resources = ARRAY_SIZE(intcs_resources), + .hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers, + intcs_prio_registers, NULL, NULL), +}; + +static void intcs_demux(unsigned int irq, struct irq_desc *desc) +{ + void __iomem *reg = (void *)get_irq_data(irq); + unsigned int evtcodeas = ioread32(reg); + + generic_handle_irq(intcs_evt2irq(evtcodeas)); +} + void __init sh7367_init_irq(void) { - /* INTCA */ + void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE); + register_intc_controller(&intca_desc); + register_intc_controller(&intcs_desc); + + /* demux using INTEVTSA */ + set_irq_data(evt2irq(0xf80), (void *)intevtsa); + set_irq_chained_handler(evt2irq(0xf80), intcs_demux); } diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index 3ce9d9bd5899..e3551b56cd03 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -319,17 +319,17 @@ static struct intc_prio_reg intca_prio_registers[] __initdata = { { 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } }, { 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S, CMT14, CMT15 } }, - { 0xe694003c, 0, 16, 4, /* IPRPA3 */ { 0, 0, + { 0xe695003c, 0, 16, 4, /* IPRPA3 */ { 0, 0, MMC_MMC_ERR, MMC_MMC_NOR } }, - { 0xe6940040, 0, 16, 4, /* IPRQA3 */ { IIC4_ALI4, IIC4_TACKI4, + { 0xe6950040, 0, 16, 4, /* IPRQA3 */ { IIC4_ALI4, IIC4_TACKI4, IIC4_WAITI4, IIC4_DTEI4 } }, - { 0xe6940044, 0, 16, 4, /* IPRRA3 */ { IIC3_ALI3, IIC3_TACKI3, + { 0xe6950044, 0, 16, 4, /* IPRRA3 */ { IIC3_ALI3, IIC3_TACKI3, IIC3_WAITI3, IIC3_DTEI3 } }, - { 0xe6940048, 0, 16, 4, /* IPRSA3 */ { 0/*ERI*/, 0/*RXI*/, + { 0xe6950048, 0, 16, 4, /* IPRSA3 */ { 0/*ERI*/, 0/*RXI*/, 0/*TXI*/, 0/*TEI*/} }, - { 0xe694004c, 0, 16, 4, /* IPRTA3 */ { USB0_USB0I1, USB0_USB0I0, + { 0xe695004c, 0, 16, 4, /* IPRTA3 */ { USB0_USB0I1, USB0_USB0I0, USB1_USB1I1, USB1_USB1I0 } }, - { 0xe6940050, 0, 16, 4, /* IPRUA3 */ { USBHSDMAC1_USHDMI, 0, 0, 0 } }, + { 0xe6950050, 0, 16, 4, /* IPRUA3 */ { USBHSDMAC1_USHDMI, 0, 0, 0 } }, }; static struct intc_sense_reg intca_sense_registers[] __initdata = { @@ -363,7 +363,227 @@ static struct intc_desc intca_desc __initdata = { intca_sense_registers, intca_ack_registers), }; +enum { + UNUSED_INTCS = 0, + + INTCS, + + /* interrupt sources INTCS */ + VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3, + RTDMAC_1_DEI0, RTDMAC_1_DEI1, RTDMAC_1_DEI2, RTDMAC_1_DEI3, + CEU, BEU_BEU0, BEU_BEU1, BEU_BEU2, + VPU, + TSIF1, + _3DG_SGX530, + _2DDMAC, + IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2, + IPMMU_IPMMUR, IPMMU_IPMMUR2, + RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR, + MSIOF, + IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0, + TMU_TUNI0, TMU_TUNI1, TMU_TUNI2, + CMT0, + TSIF0, + LMB, + CTI, + ICB, + JPU_JPEG, + LCDC, + LCRC, + RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3, + RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR, + ISP, + LCDC1, + CSIRX, + DSITX_DSITX0, + DSITX_DSITX1, + TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2, + CMT4, + DSITX1_DSITX1_0, + DSITX1_DSITX1_1, + CPORTS2R, + JPU6E, + + /* interrupt groups INTCS */ + RTDMAC_1, RTDMAC_2, VEU, BEU, IIC0, IPMMU, IIC2, + RTDMAC2_1, RTDMAC2_2, TMU1, DSITX, +}; + +static struct intc_vect intcs_vectors[] = { + INTCS_VECT(VEU_VEU0, 0x700), INTCS_VECT(VEU_VEU1, 0x720), + INTCS_VECT(VEU_VEU2, 0x740), INTCS_VECT(VEU_VEU3, 0x760), + INTCS_VECT(RTDMAC_1_DEI0, 0x800), INTCS_VECT(RTDMAC_1_DEI1, 0x820), + INTCS_VECT(RTDMAC_1_DEI2, 0x840), INTCS_VECT(RTDMAC_1_DEI3, 0x860), + INTCS_VECT(CEU, 0x880), INTCS_VECT(BEU_BEU0, 0x8a0), + INTCS_VECT(BEU_BEU1, 0x8c0), INTCS_VECT(BEU_BEU2, 0x8e0), + INTCS_VECT(VPU, 0x980), + INTCS_VECT(TSIF1, 0x9a0), + INTCS_VECT(_3DG_SGX530, 0x9e0), + INTCS_VECT(_2DDMAC, 0xa00), + INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0), + INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0), + INTCS_VECT(IPMMU_IPMMUR, 0xb00), INTCS_VECT(IPMMU_IPMMUR2, 0xb20), + INTCS_VECT(RTDMAC_2_DEI4, 0xb80), INTCS_VECT(RTDMAC_2_DEI5, 0xba0), + INTCS_VECT(RTDMAC_2_DADERR, 0xbc0), + INTCS_VECT(IIC0_ALI0, 0xe00), INTCS_VECT(IIC0_TACKI0, 0xe20), + INTCS_VECT(IIC0_WAITI0, 0xe40), INTCS_VECT(IIC0_DTEI0, 0xe60), + INTCS_VECT(TMU_TUNI0, 0xe80), INTCS_VECT(TMU_TUNI1, 0xea0), + INTCS_VECT(TMU_TUNI2, 0xec0), + INTCS_VECT(CMT0, 0xf00), + INTCS_VECT(TSIF0, 0xf20), + INTCS_VECT(LMB, 0xf60), + INTCS_VECT(CTI, 0x400), + INTCS_VECT(ICB, 0x480), + INTCS_VECT(JPU_JPEG, 0x560), + INTCS_VECT(LCDC, 0x580), + INTCS_VECT(LCRC, 0x5a0), + INTCS_VECT(RTDMAC2_1_DEI0, 0x1300), INTCS_VECT(RTDMAC2_1_DEI1, 0x1320), + INTCS_VECT(RTDMAC2_1_DEI2, 0x1340), INTCS_VECT(RTDMAC2_1_DEI3, 0x1360), + INTCS_VECT(RTDMAC2_2_DEI4, 0x1380), INTCS_VECT(RTDMAC2_2_DEI5, 0x13a0), + INTCS_VECT(RTDMAC2_2_DADERR, 0x13c0), + INTCS_VECT(ISP, 0x1720), + INTCS_VECT(LCDC1, 0x1780), + INTCS_VECT(CSIRX, 0x17a0), + INTCS_VECT(DSITX_DSITX0, 0x17c0), + INTCS_VECT(DSITX_DSITX1, 0x17e0), + INTCS_VECT(TMU1_TUNI0, 0x1900), INTCS_VECT(TMU1_TUNI1, 0x1920), + INTCS_VECT(TMU1_TUNI2, 0x1940), + INTCS_VECT(CMT4, 0x1980), + INTCS_VECT(DSITX1_DSITX1_0, 0x19a0), + INTCS_VECT(DSITX1_DSITX1_1, 0x19c0), + INTCS_VECT(CPORTS2R, 0x1a20), + INTCS_VECT(JPU6E, 0x1a80), + + INTC_VECT(INTCS, 0xf80), +}; + +static struct intc_group intcs_groups[] __initdata = { + INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI0, RTDMAC_1_DEI1, + RTDMAC_1_DEI2, RTDMAC_1_DEI3), + INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR), + INTC_GROUP(VEU, VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3), + INTC_GROUP(BEU, BEU_BEU0, BEU_BEU1, BEU_BEU2), + INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0), + INTC_GROUP(IPMMU, IPMMU_IPMMUR, IPMMU_IPMMUR2), + INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2), + INTC_GROUP(RTDMAC2_1, RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, + RTDMAC2_1_DEI2, RTDMAC2_1_DEI3), + INTC_GROUP(RTDMAC2_2, RTDMAC2_2_DEI4, + RTDMAC2_2_DEI5, RTDMAC2_2_DADERR), + INTC_GROUP(TMU1, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0), + INTC_GROUP(DSITX, DSITX_DSITX0, DSITX_DSITX1), +}; + +static struct intc_mask_reg intcs_mask_registers[] = { + { 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */ + { BEU_BEU2, BEU_BEU1, BEU_BEU0, CEU, + VEU_VEU3, VEU_VEU2, VEU_VEU1, VEU_VEU0 } }, + { 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */ + { 0, 0, 0, VPU, + 0, 0, 0, 0 } }, + { 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */ + { 0, 0, 0, _2DDMAC, + 0, 0, 0, ICB } }, + { 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */ + { 0, 0, 0, CTI, + JPU_JPEG, 0, LCRC, LCDC } }, + { 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */ + { 0, RTDMAC_2_DADERR, RTDMAC_2_DEI5, RTDMAC_2_DEI4, + RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } }, + { 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */ + { 0, 0, MSIOF, 0, + _3DG_SGX530, 0, 0, 0 } }, + { 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */ + { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0, + 0, 0, 0, 0 } }, + { 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */ + { 0, 0, 0, CMT0, + IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } }, + { 0xffd201a8, 0xffd201e8, 8, /* IMR10SA / IMCR10SA */ + { 0, 0, IPMMU_IPMMUR2, IPMMU_IPMMUR, + 0, 0, 0, 0 } }, + { 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */ + { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0, + 0, TSIF1, LMB, TSIF0 } }, + { 0xffd50180, 0xffd501c0, 8, /* IMR0SA3 / IMCR0SA3 */ + { 0, RTDMAC2_2_DADERR, RTDMAC2_2_DEI5, RTDMAC2_2_DEI4, + RTDMAC2_1_DEI3, RTDMAC2_1_DEI2, RTDMAC2_1_DEI1, RTDMAC2_1_DEI0 } }, + { 0xffd50190, 0xffd501d0, 8, /* IMR4SA3 / IMCR4SA3 */ + { 0, ISP, 0, 0, + LCDC1, CSIRX, DSITX_DSITX0, DSITX_DSITX1 } }, + { 0xffd50198, 0xffd501d8, 8, /* IMR6SA3 / IMCR6SA3 */ + { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0, + CMT4, DSITX1_DSITX1_0, DSITX1_DSITX1_1, 0 } }, + { 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */ + { 0, CPORTS2R, 0, 0, + JPU6E, 0, 0, 0 } }, + { 0xffd20104, 0, 16, /* INTAMASK */ + { 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, INTCS } }, +}; + +/* Priority is needed for INTCA to receive the INTCS interrupt */ +static struct intc_prio_reg intcs_prio_registers[] = { + { 0xffd20000, 0, 16, 4, /* IPRAS */ { CTI, 0, _2DDMAC, ICB } }, + { 0xffd20004, 0, 16, 4, /* IPRBS */ { JPU_JPEG, LCDC, 0, LCRC } }, + { 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_1, CEU, 0, VPU } }, + { 0xffd20014, 0, 16, 4, /* IPRFS */ { 0, RTDMAC_2, 0, CMT0 } }, + { 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU_TUNI0, TMU_TUNI1, + TMU_TUNI2, TSIF1 } }, + { 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, 0, VEU, BEU } }, + { 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, IIC0 } }, + { 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, _3DG_SGX530, 0, 0 } }, + { 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, 0, LMB, 0 } }, + { 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, 0, 0 } }, + { 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } }, + { 0xffd50000, 0, 16, 4, /* IPRAS3 */ { RTDMAC2_1, 0, 0, 0 } }, + { 0xffd50004, 0, 16, 4, /* IPRBS3 */ { RTDMAC2_2, 0, 0, 0 } }, + { 0xffd50020, 0, 16, 4, /* IPRIS3 */ { 0, ISP, 0, 0 } }, + { 0xffd50024, 0, 16, 4, /* IPRJS3 */ { LCDC1, CSIRX, DSITX, 0 } }, + { 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, 0 } }, + { 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, DSITX1_DSITX1_0, + DSITX1_DSITX1_1, 0 } }, + { 0xffd50038, 0, 16, 4, /* IPROS3 */ { 0, CPORTS2R, 0, 0 } }, + { 0xffd5003c, 0, 16, 4, /* IPRPS3 */ { JPU6E, 0, 0, 0 } }, +}; + +static struct resource intcs_resources[] __initdata = { + [0] = { + .start = 0xffd20000, + .end = 0xffd201ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0xffd50000, + .end = 0xffd501ff, + .flags = IORESOURCE_MEM, + } +}; + +static struct intc_desc intcs_desc __initdata = { + .name = "sh7372-intcs", + .resource = intcs_resources, + .num_resources = ARRAY_SIZE(intcs_resources), + .hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers, + intcs_prio_registers, NULL, NULL), +}; + +static void intcs_demux(unsigned int irq, struct irq_desc *desc) +{ + void __iomem *reg = (void *)get_irq_data(irq); + unsigned int evtcodeas = ioread32(reg); + + generic_handle_irq(intcs_evt2irq(evtcodeas)); +} + void __init sh7372_init_irq(void) { + void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE); + register_intc_controller(&intca_desc); + register_intc_controller(&intcs_desc); + + /* demux using INTEVTSA */ + set_irq_data(evt2irq(0xf80), (void *)intevtsa); + set_irq_chained_handler(evt2irq(0xf80), intcs_demux); } diff --git a/arch/arm/mach-shmobile/intc-sh7377.c b/arch/arm/mach-shmobile/intc-sh7377.c index 5c781e2d1897..2cdeb8ccd821 100644 --- a/arch/arm/mach-shmobile/intc-sh7377.c +++ b/arch/arm/mach-shmobile/intc-sh7377.c @@ -90,7 +90,7 @@ enum { ICUSB, ICUDMC }; -static struct intc_vect intca_vectors[] = { +static struct intc_vect intca_vectors[] __initdata = { INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220), INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260), INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0), @@ -202,7 +202,7 @@ static struct intc_group intca_groups[] __initdata = { INTC_GROUP(ICUDMC, ICUDMC_ICUDMC1, ICUDMC_ICUDMC2), }; -static struct intc_mask_reg intca_mask_registers[] = { +static struct intc_mask_reg intca_mask_registers[] __initdata = { { 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */ { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, { 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */ @@ -272,7 +272,7 @@ static struct intc_mask_reg intca_mask_registers[] = { SCIFA6, 0, 0, 0 } }, }; -static struct intc_prio_reg intca_prio_registers[] = { +static struct intc_prio_reg intca_prio_registers[] __initdata = { { 0xe6900010, 0, 32, 4, /* INTPRI00A */ { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, { 0xe6900014, 0, 32, 4, /* INTPRI10A */ @@ -346,7 +346,301 @@ static struct intc_desc intca_desc __initdata = { intca_sense_registers, intca_ack_registers), }; +/* this macro ignore entry which is also in INTCA */ +#define __IGNORE(a...) +#define __IGNORE0(a...) 0 + +enum { + UNUSED_INTCS = 0, + + INTCS, + + /* interrupt sources INTCS */ + VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3, + RTDMAC1_1_DEI0, RTDMAC1_1_DEI1, RTDMAC1_1_DEI2, RTDMAC1_1_DEI3, + CEU, + BEU_BEU0, BEU_BEU1, BEU_BEU2, + __IGNORE(MFI) + __IGNORE(BBIF2) + VPU, + TSIF1, + __IGNORE(SGX540) + _2DDMAC, + IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2, + IPMMU_IPMMUR, IPMMU_IPMMUR2, + RTDMAC1_2_DEI4, RTDMAC1_2_DEI5, RTDMAC1_2_DADERR, + __IGNORE(KEYSC) + __IGNORE(TTI20) + __IGNORE(MSIOF) + IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0, + TMU_TUNI0, TMU_TUNI1, TMU_TUNI2, + CMT0, + TSIF0, + __IGNORE(CMT2) + LMB, + __IGNORE(MSUG) + __IGNORE(MSU_MSU, MSU_MSU2) + __IGNORE(CTI) + MVI3, + __IGNORE(RWDT0) + __IGNORE(RWDT1) + ICB, + PEP, + ASA, + __IGNORE(_2DG) + HQE, + JPU, + LCDC0, + __IGNORE(LCRC) + RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3, + RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR, + FRC, + LCDC1, + CSIRX, + DSITX_DSITX0, DSITX_DSITX1, + __IGNORE(SPU2_SPU0, SPU2_SPU1) + __IGNORE(FSI) + __IGNORE(FMSI) + __IGNORE(SCUV) + TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12, + TSIF2, + CMT4, + __IGNORE(MFIS2) + CPORTS2R, + + /* interrupt groups INTCS */ + RTDMAC1_1, RTDMAC1_2, VEU, BEU, IIC0, __IGNORE(MSU) IPMMU, + IIC2, RTDMAC2_1, RTDMAC2_2, DSITX, __IGNORE(SPU2) TMU1, +}; + +#define INTCS_INTVECT 0x0F80 +static struct intc_vect intcs_vectors[] __initdata = { + INTCS_VECT(VEU_VEU0, 0x0700), INTCS_VECT(VEU_VEU1, 0x0720), + INTCS_VECT(VEU_VEU2, 0x0740), INTCS_VECT(VEU_VEU3, 0x0760), + INTCS_VECT(RTDMAC1_1_DEI0, 0x0800), INTCS_VECT(RTDMAC1_1_DEI1, 0x0820), + INTCS_VECT(RTDMAC1_1_DEI2, 0x0840), INTCS_VECT(RTDMAC1_1_DEI3, 0x0860), + INTCS_VECT(CEU, 0x0880), + INTCS_VECT(BEU_BEU0, 0x08A0), + INTCS_VECT(BEU_BEU1, 0x08C0), + INTCS_VECT(BEU_BEU2, 0x08E0), + __IGNORE(INTCS_VECT(MFI, 0x0900)) + __IGNORE(INTCS_VECT(BBIF2, 0x0960)) + INTCS_VECT(VPU, 0x0980), + INTCS_VECT(TSIF1, 0x09A0), + __IGNORE(INTCS_VECT(SGX540, 0x09E0)) + INTCS_VECT(_2DDMAC, 0x0A00), + INTCS_VECT(IIC2_ALI2, 0x0A80), INTCS_VECT(IIC2_TACKI2, 0x0AA0), + INTCS_VECT(IIC2_WAITI2, 0x0AC0), INTCS_VECT(IIC2_DTEI2, 0x0AE0), + INTCS_VECT(IPMMU_IPMMUR, 0x0B00), INTCS_VECT(IPMMU_IPMMUR2, 0x0B20), + INTCS_VECT(RTDMAC1_2_DEI4, 0x0B80), + INTCS_VECT(RTDMAC1_2_DEI5, 0x0BA0), + INTCS_VECT(RTDMAC1_2_DADERR, 0x0BC0), + __IGNORE(INTCS_VECT(KEYSC 0x0BE0)) + __IGNORE(INTCS_VECT(TTI20, 0x0C80)) + __IGNORE(INTCS_VECT(MSIOF, 0x0D20)) + INTCS_VECT(IIC0_ALI0, 0x0E00), INTCS_VECT(IIC0_TACKI0, 0x0E20), + INTCS_VECT(IIC0_WAITI0, 0x0E40), INTCS_VECT(IIC0_DTEI0, 0x0E60), + INTCS_VECT(TMU_TUNI0, 0x0E80), + INTCS_VECT(TMU_TUNI1, 0x0EA0), + INTCS_VECT(TMU_TUNI2, 0x0EC0), + INTCS_VECT(CMT0, 0x0F00), + INTCS_VECT(TSIF0, 0x0F20), + __IGNORE(INTCS_VECT(CMT2, 0x0F40)) + INTCS_VECT(LMB, 0x0F60), + __IGNORE(INTCS_VECT(MSUG, 0x0F80)) + __IGNORE(INTCS_VECT(MSU_MSU, 0x0FA0)) + __IGNORE(INTCS_VECT(MSU_MSU2, 0x0FC0)) + __IGNORE(INTCS_VECT(CTI, 0x0400)) + INTCS_VECT(MVI3, 0x0420), + __IGNORE(INTCS_VECT(RWDT0, 0x0440)) + __IGNORE(INTCS_VECT(RWDT1, 0x0460)) + INTCS_VECT(ICB, 0x0480), + INTCS_VECT(PEP, 0x04A0), + INTCS_VECT(ASA, 0x04C0), + __IGNORE(INTCS_VECT(_2DG, 0x04E0)) + INTCS_VECT(HQE, 0x0540), + INTCS_VECT(JPU, 0x0560), + INTCS_VECT(LCDC0, 0x0580), + __IGNORE(INTCS_VECT(LCRC, 0x05A0)) + INTCS_VECT(RTDMAC2_1_DEI0, 0x1300), INTCS_VECT(RTDMAC2_1_DEI1, 0x1320), + INTCS_VECT(RTDMAC2_1_DEI2, 0x1340), INTCS_VECT(RTDMAC2_1_DEI3, 0x1360), + INTCS_VECT(RTDMAC2_2_DEI4, 0x1380), INTCS_VECT(RTDMAC2_2_DEI5, 0x13A0), + INTCS_VECT(RTDMAC2_2_DADERR, 0x13C0), + INTCS_VECT(FRC, 0x1700), + INTCS_VECT(LCDC1, 0x1780), + INTCS_VECT(CSIRX, 0x17A0), + INTCS_VECT(DSITX_DSITX0, 0x17C0), INTCS_VECT(DSITX_DSITX1, 0x17E0), + __IGNORE(INTCS_VECT(SPU2_SPU0, 0x1800)) + __IGNORE(INTCS_VECT(SPU2_SPU1, 0x1820)) + __IGNORE(INTCS_VECT(FSI, 0x1840)) + __IGNORE(INTCS_VECT(FMSI, 0x1860)) + __IGNORE(INTCS_VECT(SCUV, 0x1880)) + INTCS_VECT(TMU1_TUNI10, 0x1900), INTCS_VECT(TMU1_TUNI11, 0x1920), + INTCS_VECT(TMU1_TUNI12, 0x1940), + INTCS_VECT(TSIF2, 0x1960), + INTCS_VECT(CMT4, 0x1980), + __IGNORE(INTCS_VECT(MFIS2, 0x1A00)) + INTCS_VECT(CPORTS2R, 0x1A20), + + INTC_VECT(INTCS, INTCS_INTVECT), +}; + +static struct intc_group intcs_groups[] __initdata = { + INTC_GROUP(RTDMAC1_1, + RTDMAC1_1_DEI0, RTDMAC1_1_DEI1, + RTDMAC1_1_DEI2, RTDMAC1_1_DEI3), + INTC_GROUP(RTDMAC1_2, + RTDMAC1_2_DEI4, RTDMAC1_2_DEI5, RTDMAC1_2_DADERR), + INTC_GROUP(VEU, VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3), + INTC_GROUP(BEU, BEU_BEU0, BEU_BEU1, BEU_BEU2), + INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0), + __IGNORE(INTC_GROUP(MSU, MSU_MSU, MSU_MSU2)) + INTC_GROUP(IPMMU, IPMMU_IPMMUR, IPMMU_IPMMUR2), + INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2), + INTC_GROUP(RTDMAC2_1, + RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, + RTDMAC2_1_DEI2, RTDMAC2_1_DEI3), + INTC_GROUP(RTDMAC2_2, RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR), + INTC_GROUP(DSITX, DSITX_DSITX0, DSITX_DSITX1), + __IGNORE(INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1)) + INTC_GROUP(TMU1, TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12), +}; + +static struct intc_mask_reg intcs_mask_registers[] __initdata = { + { 0xE6940184, 0xE69401C4, 8, /* IMR1AS / IMCR1AS */ + { BEU_BEU2, BEU_BEU1, BEU_BEU0, CEU, + VEU_VEU3, VEU_VEU2, VEU_VEU1, VEU_VEU0 } }, + { 0xE6940188, 0xE69401C8, 8, /* IMR2AS / IMCR2AS */ + { 0, 0, 0, VPU, + __IGNORE0(BBIF2), 0, 0, __IGNORE0(MFI) } }, + { 0xE694018C, 0xE69401CC, 8, /* IMR3AS / IMCR3AS */ + { 0, 0, 0, _2DDMAC, + __IGNORE0(_2DG), ASA, PEP, ICB } }, + { 0xE6940190, 0xE69401D0, 8, /* IMR4AS / IMCR4AS */ + { 0, 0, MVI3, __IGNORE0(CTI), + JPU, HQE, __IGNORE0(LCRC), LCDC0 } }, + { 0xE6940194, 0xE69401D4, 8, /* IMR5AS / IMCR5AS */ + { __IGNORE0(KEYSC), RTDMAC1_2_DADERR, RTDMAC1_2_DEI5, RTDMAC1_2_DEI4, + RTDMAC1_1_DEI3, RTDMAC1_1_DEI2, RTDMAC1_1_DEI1, RTDMAC1_1_DEI0 } }, + __IGNORE({ 0xE6940198, 0xE69401D8, 8, /* IMR6AS / IMCR6AS */ + { 0, 0, MSIOF, 0, + SGX540, 0, TTI20, 0 } }) + { 0xE694019C, 0xE69401DC, 8, /* IMR7AS / IMCR7AS */ + { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0, + 0, 0, 0, 0 } }, + __IGNORE({ 0xE69401A0, 0xE69401E0, 8, /* IMR8AS / IMCR8AS */ + { 0, 0, 0, 0, + 0, MSU_MSU, MSU_MSU2, MSUG } }) + { 0xE69401A4, 0xE69401E4, 8, /* IMR9AS / IMCR9AS */ + { __IGNORE0(RWDT1), __IGNORE0(RWDT0), __IGNORE0(CMT2), CMT0, + IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } }, + { 0xE69401A8, 0xE69401E8, 8, /* IMR10AS / IMCR10AS */ + { 0, 0, IPMMU_IPMMUR, IPMMU_IPMMUR2, + 0, 0, 0, 0 } }, + { 0xE69401AC, 0xE69401EC, 8, /* IMR11AS / IMCR11AS */ + { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0, + 0, TSIF1, LMB, TSIF0 } }, + { 0xE6950180, 0xE69501C0, 8, /* IMR0AS3 / IMCR0AS3 */ + { RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3, + RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR, 0 } }, + { 0xE6950190, 0xE69501D0, 8, /* IMR4AS3 / IMCR4AS3 */ + { FRC, 0, 0, 0, + LCDC1, CSIRX, DSITX_DSITX0, DSITX_DSITX1 } }, + __IGNORE({ 0xE6950194, 0xE69501D4, 8, /* IMR5AS3 / IMCR5AS3 */ + {SPU2_SPU0, SPU2_SPU1, FSI, FMSI, + SCUV, 0, 0, 0 } }) + { 0xE6950198, 0xE69501D8, 8, /* IMR6AS3 / IMCR6AS3 */ + { TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12, TSIF2, + CMT4, 0, 0, 0 } }, + { 0xE695019C, 0xE69501DC, 8, /* IMR7AS3 / IMCR7AS3 */ + { __IGNORE0(MFIS2), CPORTS2R, 0, 0, + 0, 0, 0, 0 } }, + { 0xFFD20104, 0, 16, /* INTAMASK */ + { 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, INTCS } } +}; + +static struct intc_prio_reg intcs_prio_registers[] __initdata = { + /* IPRAS */ + { 0xFFD20000, 0, 16, 4, { __IGNORE0(CTI), MVI3, _2DDMAC, ICB } }, + /* IPRBS */ + { 0xFFD20004, 0, 16, 4, { JPU, LCDC0, 0, __IGNORE0(LCRC) } }, + /* IPRCS */ + __IGNORE({ 0xFFD20008, 0, 16, 4, { BBIF2, 0, 0, 0 } }) + /* IPRES */ + { 0xFFD20010, 0, 16, 4, { RTDMAC1_1, CEU, __IGNORE0(MFI), VPU } }, + /* IPRFS */ + { 0xFFD20014, 0, 16, 4, + { __IGNORE0(KEYSC), RTDMAC1_2, __IGNORE0(CMT2), CMT0 } }, + /* IPRGS */ + { 0xFFD20018, 0, 16, 4, { TMU_TUNI0, TMU_TUNI1, TMU_TUNI2, TSIF1 } }, + /* IPRHS */ + { 0xFFD2001C, 0, 16, 4, { __IGNORE0(TTI20), 0, VEU, BEU } }, + /* IPRIS */ + { 0xFFD20020, 0, 16, 4, { 0, __IGNORE0(MSIOF), TSIF0, IIC0 } }, + /* IPRJS */ + __IGNORE({ 0xFFD20024, 0, 16, 4, { 0, SGX540, MSUG, MSU } }) + /* IPRKS */ + { 0xFFD20028, 0, 16, 4, { __IGNORE0(_2DG), ASA, LMB, PEP } }, + /* IPRLS */ + { 0xFFD2002C, 0, 16, 4, { IPMMU, 0, 0, HQE } }, + /* IPRMS */ + { 0xFFD20030, 0, 16, 4, + { IIC2, 0, __IGNORE0(RWDT1), __IGNORE0(RWDT0) } }, + /* IPRAS3 */ + { 0xFFD50000, 0, 16, 4, { RTDMAC2_1, 0, 0, 0 } }, + /* IPRBS3 */ + { 0xFFD50004, 0, 16, 4, { RTDMAC2_2, 0, 0, 0 } }, + /* IPRIS3 */ + { 0xFFD50020, 0, 16, 4, { FRC, 0, 0, 0 } }, + /* IPRJS3 */ + { 0xFFD50024, 0, 16, 4, { LCDC1, CSIRX, DSITX, 0 } }, + /* IPRKS3 */ + __IGNORE({ 0xFFD50028, 0, 16, 4, { SPU2, 0, FSI, FMSI } }) + /* IPRLS3 */ + __IGNORE({ 0xFFD5002C, 0, 16, 4, { SCUV, 0, 0, 0 } }) + /* IPRMS3 */ + { 0xFFD50030, 0, 16, 4, { TMU1, 0, 0, TSIF2 } }, + /* IPRNS3 */ + { 0xFFD50034, 0, 16, 4, { CMT4, 0, 0, 0 } }, + /* IPROS3 */ + { 0xFFD50038, 0, 16, 4, { __IGNORE0(MFIS2), CPORTS2R, 0, 0 } }, +}; + +static struct resource intcs_resources[] __initdata = { + [0] = { + .start = 0xffd20000, + .end = 0xffd500ff, + .flags = IORESOURCE_MEM, + } +}; + +static struct intc_desc intcs_desc __initdata = { + .name = "sh7377-intcs", + .resource = intcs_resources, + .num_resources = ARRAY_SIZE(intcs_resources), + .hw = INTC_HW_DESC(intcs_vectors, intcs_groups, + intcs_mask_registers, intcs_prio_registers, + NULL, NULL), +}; + +static void intcs_demux(unsigned int irq, struct irq_desc *desc) +{ + void __iomem *reg = (void *)get_irq_data(irq); + unsigned int evtcodeas = ioread32(reg); + + generic_handle_irq(intcs_evt2irq(evtcodeas)); +} + +#define INTEVTSA 0xFFD20100 void __init sh7377_init_irq(void) { + void __iomem *intevtsa = ioremap_nocache(INTEVTSA, PAGE_SIZE); + register_intc_controller(&intca_desc); + register_intc_controller(&intcs_desc); + + /* demux using INTEVTSA */ + set_irq_data(evt2irq(INTCS_INTVECT), (void *)intevtsa); + set_irq_chained_handler(evt2irq(INTCS_INTVECT), intcs_demux); } diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c index 9557d0964d73..ec420353f8e3 100644 --- a/arch/arm/mach-shmobile/pfc-sh7372.c +++ b/arch/arm/mach-shmobile/pfc-sh7372.c @@ -1160,6 +1160,9 @@ static struct pinmux_gpio pinmux_gpios[] = { GPIO_FN(LCDD18), GPIO_FN(LCDD19), GPIO_FN(LCDD20), GPIO_FN(LCDD21), GPIO_FN(LCDD22), GPIO_FN(LCDD23), + GPIO_FN(LCDC0_SELECT), + GPIO_FN(LCDC1_SELECT), + /* IRDA */ GPIO_FN(IRDA_OUT), GPIO_FN(IRDA_IN), GPIO_FN(IRDA_FIRSEL), GPIO_FN(IROUT_139), GPIO_FN(IROUT_140), diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c index eca90716140e..3148c11a550e 100644 --- a/arch/arm/mach-shmobile/setup-sh7367.c +++ b/arch/arm/mach-shmobile/setup-sh7367.c @@ -31,11 +31,13 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +/* SCIFA0 */ static struct plat_sci_port scif0_platform_data = { .mapbase = 0xe6c40000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 80, 80, 80, 80 }, + .irqs = { evt2irq(0xc00), evt2irq(0xc00), + evt2irq(0xc00), evt2irq(0xc00) }, }; static struct platform_device scif0_device = { @@ -46,11 +48,13 @@ static struct platform_device scif0_device = { }, }; +/* SCIFA1 */ static struct plat_sci_port scif1_platform_data = { .mapbase = 0xe6c50000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 81, 81, 81, 81 }, + .irqs = { evt2irq(0xc20), evt2irq(0xc20), + evt2irq(0xc20), evt2irq(0xc20) }, }; static struct platform_device scif1_device = { @@ -61,11 +65,13 @@ static struct platform_device scif1_device = { }, }; +/* SCIFA2 */ static struct plat_sci_port scif2_platform_data = { .mapbase = 0xe6c60000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 82, 82, 82, 82 }, + .irqs = { evt2irq(0xc40), evt2irq(0xc40), + evt2irq(0xc40), evt2irq(0xc40) }, }; static struct platform_device scif2_device = { @@ -76,11 +82,13 @@ static struct platform_device scif2_device = { }, }; +/* SCIFA3 */ static struct plat_sci_port scif3_platform_data = { .mapbase = 0xe6c70000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 83, 83, 83, 83 }, + .irqs = { evt2irq(0xc60), evt2irq(0xc60), + evt2irq(0xc60), evt2irq(0xc60) }, }; static struct platform_device scif3_device = { @@ -91,11 +99,13 @@ static struct platform_device scif3_device = { }, }; +/* SCIFA4 */ static struct plat_sci_port scif4_platform_data = { .mapbase = 0xe6c80000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 89, 89, 89, 89 }, + .irqs = { evt2irq(0xd20), evt2irq(0xd20), + evt2irq(0xd20), evt2irq(0xd20) }, }; static struct platform_device scif4_device = { @@ -106,11 +116,13 @@ static struct platform_device scif4_device = { }, }; +/* SCIFA5 */ static struct plat_sci_port scif5_platform_data = { .mapbase = 0xe6cb0000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 90, 90, 90, 90 }, + .irqs = { evt2irq(0xd40), evt2irq(0xd40), + evt2irq(0xd40), evt2irq(0xd40) }, }; static struct platform_device scif5_device = { @@ -121,11 +133,13 @@ static struct platform_device scif5_device = { }, }; +/* SCIFB */ static struct plat_sci_port scif6_platform_data = { .mapbase = 0xe6c30000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 91, 91, 91, 91 }, + .irqs = { evt2irq(0xd60), evt2irq(0xd60), + evt2irq(0xd60), evt2irq(0xd60) }, }; static struct platform_device scif6_device = { @@ -153,7 +167,7 @@ static struct resource cmt10_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 72, + .start = evt2irq(0xb00), /* CMT1_CMT10 */ .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 1d1153290f59..e26686c9d0b6 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -26,17 +26,21 @@ #include <linux/input.h> #include <linux/io.h> #include <linux/serial_sci.h> +#include <linux/sh_dma.h> #include <linux/sh_intc.h> #include <linux/sh_timer.h> #include <mach/hardware.h> +#include <mach/sh7372.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +/* SCIFA0 */ static struct plat_sci_port scif0_platform_data = { .mapbase = 0xe6c40000, .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 80, 80, 80, 80 }, + .type = PORT_SCIFA, + .irqs = { evt2irq(0x0c00), evt2irq(0x0c00), + evt2irq(0x0c00), evt2irq(0x0c00) }, }; static struct platform_device scif0_device = { @@ -47,11 +51,13 @@ static struct platform_device scif0_device = { }, }; +/* SCIFA1 */ static struct plat_sci_port scif1_platform_data = { .mapbase = 0xe6c50000, .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 81, 81, 81, 81 }, + .type = PORT_SCIFA, + .irqs = { evt2irq(0x0c20), evt2irq(0x0c20), + evt2irq(0x0c20), evt2irq(0x0c20) }, }; static struct platform_device scif1_device = { @@ -62,11 +68,13 @@ static struct platform_device scif1_device = { }, }; +/* SCIFA2 */ static struct plat_sci_port scif2_platform_data = { .mapbase = 0xe6c60000, .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 82, 82, 82, 82 }, + .type = PORT_SCIFA, + .irqs = { evt2irq(0x0c40), evt2irq(0x0c40), + evt2irq(0x0c40), evt2irq(0x0c40) }, }; static struct platform_device scif2_device = { @@ -77,11 +85,13 @@ static struct platform_device scif2_device = { }, }; +/* SCIFA3 */ static struct plat_sci_port scif3_platform_data = { .mapbase = 0xe6c70000, .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 83, 83, 83, 83 }, + .type = PORT_SCIFA, + .irqs = { evt2irq(0x0c60), evt2irq(0x0c60), + evt2irq(0x0c60), evt2irq(0x0c60) }, }; static struct platform_device scif3_device = { @@ -92,11 +102,13 @@ static struct platform_device scif3_device = { }, }; +/* SCIFA4 */ static struct plat_sci_port scif4_platform_data = { .mapbase = 0xe6c80000, .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 89, 89, 89, 89 }, + .type = PORT_SCIFA, + .irqs = { evt2irq(0x0d20), evt2irq(0x0d20), + evt2irq(0x0d20), evt2irq(0x0d20) }, }; static struct platform_device scif4_device = { @@ -107,11 +119,13 @@ static struct platform_device scif4_device = { }, }; +/* SCIFA5 */ static struct plat_sci_port scif5_platform_data = { .mapbase = 0xe6cb0000, .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 90, 90, 90, 90 }, + .type = PORT_SCIFA, + .irqs = { evt2irq(0x0d40), evt2irq(0x0d40), + evt2irq(0x0d40), evt2irq(0x0d40) }, }; static struct platform_device scif5_device = { @@ -122,11 +136,13 @@ static struct platform_device scif5_device = { }, }; +/* SCIFB */ static struct plat_sci_port scif6_platform_data = { .mapbase = 0xe6c30000, .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 91, 91, 91, 91 }, + .type = PORT_SCIFB, + .irqs = { evt2irq(0x0d60), evt2irq(0x0d60), + evt2irq(0x0d60), evt2irq(0x0d60) }, }; static struct platform_device scif6_device = { @@ -137,11 +153,12 @@ static struct platform_device scif6_device = { }, }; +/* CMT */ static struct sh_timer_config cmt10_platform_data = { .name = "CMT10", .channel_offset = 0x10, .timer_bit = 0, - .clk = "r_clk", + .clk = "cmt1", .clockevent_rating = 125, .clocksource_rating = 125, }; @@ -154,7 +171,7 @@ static struct resource cmt10_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 72, + .start = evt2irq(0x0b00), /* CMT1_CMT10 */ .flags = IORESOURCE_IRQ, }, }; @@ -169,6 +186,337 @@ static struct platform_device cmt10_device = { .num_resources = ARRAY_SIZE(cmt10_resources), }; +/* I2C */ +static struct resource iic0_resources[] = { + [0] = { + .name = "IIC0", + .start = 0xFFF20000, + .end = 0xFFF20425 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0xe00), /* IIC0_ALI0 */ + .end = intcs_evt2irq(0xe60), /* IIC0_DTEI0 */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device iic0_device = { + .name = "i2c-sh_mobile", + .id = 0, /* "i2c0" clock */ + .num_resources = ARRAY_SIZE(iic0_resources), + .resource = iic0_resources, +}; + +static struct resource iic1_resources[] = { + [0] = { + .name = "IIC1", + .start = 0xE6C20000, + .end = 0xE6C20425 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x780), /* IIC1_ALI1 */ + .end = evt2irq(0x7e0), /* IIC1_DTEI1 */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device iic1_device = { + .name = "i2c-sh_mobile", + .id = 1, /* "i2c1" clock */ + .num_resources = ARRAY_SIZE(iic1_resources), + .resource = iic1_resources, +}; + +/* DMA */ +/* Transmit sizes and respective CHCR register values */ +enum { + XMIT_SZ_8BIT = 0, + XMIT_SZ_16BIT = 1, + XMIT_SZ_32BIT = 2, + XMIT_SZ_64BIT = 7, + XMIT_SZ_128BIT = 3, + XMIT_SZ_256BIT = 4, + XMIT_SZ_512BIT = 5, +}; + +/* log2(size / 8) - used to calculate number of transfers */ +#define TS_SHIFT { \ + [XMIT_SZ_8BIT] = 0, \ + [XMIT_SZ_16BIT] = 1, \ + [XMIT_SZ_32BIT] = 2, \ + [XMIT_SZ_64BIT] = 3, \ + [XMIT_SZ_128BIT] = 4, \ + [XMIT_SZ_256BIT] = 5, \ + [XMIT_SZ_512BIT] = 6, \ +} + +#define TS_INDEX2VAL(i) ((((i) & 3) << 3) | \ + (((i) & 0xc) << (20 - 2))) + +static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = { + { + .slave_id = SHDMA_SLAVE_SCIF0_TX, + .addr = 0xe6c40020, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x21, + }, { + .slave_id = SHDMA_SLAVE_SCIF0_RX, + .addr = 0xe6c40024, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x22, + }, { + .slave_id = SHDMA_SLAVE_SCIF1_TX, + .addr = 0xe6c50020, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x25, + }, { + .slave_id = SHDMA_SLAVE_SCIF1_RX, + .addr = 0xe6c50024, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x26, + }, { + .slave_id = SHDMA_SLAVE_SCIF2_TX, + .addr = 0xe6c60020, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x29, + }, { + .slave_id = SHDMA_SLAVE_SCIF2_RX, + .addr = 0xe6c60024, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x2a, + }, { + .slave_id = SHDMA_SLAVE_SCIF3_TX, + .addr = 0xe6c70020, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x2d, + }, { + .slave_id = SHDMA_SLAVE_SCIF3_RX, + .addr = 0xe6c70024, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x2e, + }, { + .slave_id = SHDMA_SLAVE_SCIF4_TX, + .addr = 0xe6c80020, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x39, + }, { + .slave_id = SHDMA_SLAVE_SCIF4_RX, + .addr = 0xe6c80024, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x3a, + }, { + .slave_id = SHDMA_SLAVE_SCIF5_TX, + .addr = 0xe6cb0020, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x35, + }, { + .slave_id = SHDMA_SLAVE_SCIF5_RX, + .addr = 0xe6cb0024, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x36, + }, { + .slave_id = SHDMA_SLAVE_SCIF6_TX, + .addr = 0xe6c30040, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x3d, + }, { + .slave_id = SHDMA_SLAVE_SCIF6_RX, + .addr = 0xe6c30060, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x3e, + }, { + .slave_id = SHDMA_SLAVE_SDHI0_TX, + .addr = 0xe6850030, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .mid_rid = 0xc1, + }, { + .slave_id = SHDMA_SLAVE_SDHI0_RX, + .addr = 0xe6850030, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .mid_rid = 0xc2, + }, { + .slave_id = SHDMA_SLAVE_SDHI1_TX, + .addr = 0xe6860030, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .mid_rid = 0xc9, + }, { + .slave_id = SHDMA_SLAVE_SDHI1_RX, + .addr = 0xe6860030, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .mid_rid = 0xca, + }, { + .slave_id = SHDMA_SLAVE_SDHI2_TX, + .addr = 0xe6870030, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .mid_rid = 0xcd, + }, { + .slave_id = SHDMA_SLAVE_SDHI2_RX, + .addr = 0xe6870030, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .mid_rid = 0xce, + }, +}; + +static const struct sh_dmae_channel sh7372_dmae_channels[] = { + { + .offset = 0, + .dmars = 0, + .dmars_bit = 0, + }, { + .offset = 0x10, + .dmars = 0, + .dmars_bit = 8, + }, { + .offset = 0x20, + .dmars = 4, + .dmars_bit = 0, + }, { + .offset = 0x30, + .dmars = 4, + .dmars_bit = 8, + }, { + .offset = 0x50, + .dmars = 8, + .dmars_bit = 0, + }, { + .offset = 0x60, + .dmars = 8, + .dmars_bit = 8, + } +}; + +static const unsigned int ts_shift[] = TS_SHIFT; + +static struct sh_dmae_pdata dma_platform_data = { + .slave = sh7372_dmae_slaves, + .slave_num = ARRAY_SIZE(sh7372_dmae_slaves), + .channel = sh7372_dmae_channels, + .channel_num = ARRAY_SIZE(sh7372_dmae_channels), + .ts_low_shift = 3, + .ts_low_mask = 0x18, + .ts_high_shift = (20 - 2), /* 2 bits for shifted low TS */ + .ts_high_mask = 0x00300000, + .ts_shift = ts_shift, + .ts_shift_num = ARRAY_SIZE(ts_shift), + .dmaor_init = DMAOR_DME, +}; + +/* Resource order important! */ +static struct resource sh7372_dmae0_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xfe008020, + .end = 0xfe00808f, + .flags = IORESOURCE_MEM, + }, + { + /* DMARSx */ + .start = 0xfe009000, + .end = 0xfe00900b, + .flags = IORESOURCE_MEM, + }, + { + /* DMA error IRQ */ + .start = 246, + .end = 246, + .flags = IORESOURCE_IRQ, + }, + { + /* IRQ for channels 0-5 */ + .start = 240, + .end = 245, + .flags = IORESOURCE_IRQ, + }, +}; + +/* Resource order important! */ +static struct resource sh7372_dmae1_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xfe018020, + .end = 0xfe01808f, + .flags = IORESOURCE_MEM, + }, + { + /* DMARSx */ + .start = 0xfe019000, + .end = 0xfe01900b, + .flags = IORESOURCE_MEM, + }, + { + /* DMA error IRQ */ + .start = 254, + .end = 254, + .flags = IORESOURCE_IRQ, + }, + { + /* IRQ for channels 0-5 */ + .start = 248, + .end = 253, + .flags = IORESOURCE_IRQ, + }, +}; + +/* Resource order important! */ +static struct resource sh7372_dmae2_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xfe028020, + .end = 0xfe02808f, + .flags = IORESOURCE_MEM, + }, + { + /* DMARSx */ + .start = 0xfe029000, + .end = 0xfe02900b, + .flags = IORESOURCE_MEM, + }, + { + /* DMA error IRQ */ + .start = 262, + .end = 262, + .flags = IORESOURCE_IRQ, + }, + { + /* IRQ for channels 0-5 */ + .start = 256, + .end = 261, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dma0_device = { + .name = "sh-dma-engine", + .id = 0, + .resource = sh7372_dmae0_resources, + .num_resources = ARRAY_SIZE(sh7372_dmae0_resources), + .dev = { + .platform_data = &dma_platform_data, + }, +}; + +static struct platform_device dma1_device = { + .name = "sh-dma-engine", + .id = 1, + .resource = sh7372_dmae1_resources, + .num_resources = ARRAY_SIZE(sh7372_dmae1_resources), + .dev = { + .platform_data = &dma_platform_data, + }, +}; + +static struct platform_device dma2_device = { + .name = "sh-dma-engine", + .id = 2, + .resource = sh7372_dmae2_resources, + .num_resources = ARRAY_SIZE(sh7372_dmae2_resources), + .dev = { + .platform_data = &dma_platform_data, + }, +}; + static struct platform_device *sh7372_early_devices[] __initdata = { &scif0_device, &scif1_device, @@ -178,6 +526,11 @@ static struct platform_device *sh7372_early_devices[] __initdata = { &scif5_device, &scif6_device, &cmt10_device, + &iic0_device, + &iic1_device, + &dma0_device, + &dma1_device, + &dma2_device, }; void __init sh7372_add_standard_devices(void) @@ -186,14 +539,8 @@ void __init sh7372_add_standard_devices(void) ARRAY_SIZE(sh7372_early_devices)); } -#define SMSTPCR3 0xe615013c -#define SMSTPCR3_CMT1 (1 << 29) - void __init sh7372_add_early_devices(void) { - /* enable clock to CMT1 */ - __raw_writel(__raw_readl(SMSTPCR3) & ~SMSTPCR3_CMT1, SMSTPCR3); - early_platform_add_devices(sh7372_early_devices, ARRAY_SIZE(sh7372_early_devices)); } diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c index 60e37774c35c..bb4adf17dbf4 100644 --- a/arch/arm/mach-shmobile/setup-sh7377.c +++ b/arch/arm/mach-shmobile/setup-sh7377.c @@ -32,11 +32,13 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +/* SCIFA0 */ static struct plat_sci_port scif0_platform_data = { .mapbase = 0xe6c40000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 80, 80, 80, 80 }, + .irqs = { evt2irq(0xc00), evt2irq(0xc00), + evt2irq(0xc00), evt2irq(0xc00) }, }; static struct platform_device scif0_device = { @@ -47,11 +49,13 @@ static struct platform_device scif0_device = { }, }; +/* SCIFA1 */ static struct plat_sci_port scif1_platform_data = { .mapbase = 0xe6c50000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 81, 81, 81, 81 }, + .irqs = { evt2irq(0xc20), evt2irq(0xc20), + evt2irq(0xc20), evt2irq(0xc20) }, }; static struct platform_device scif1_device = { @@ -62,11 +66,13 @@ static struct platform_device scif1_device = { }, }; +/* SCIFA2 */ static struct plat_sci_port scif2_platform_data = { .mapbase = 0xe6c60000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 82, 82, 82, 82 }, + .irqs = { evt2irq(0xc40), evt2irq(0xc40), + evt2irq(0xc40), evt2irq(0xc40) }, }; static struct platform_device scif2_device = { @@ -77,11 +83,13 @@ static struct platform_device scif2_device = { }, }; +/* SCIFA3 */ static struct plat_sci_port scif3_platform_data = { .mapbase = 0xe6c70000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 83, 83, 83, 83 }, + .irqs = { evt2irq(0xc60), evt2irq(0xc60), + evt2irq(0xc60), evt2irq(0xc60) }, }; static struct platform_device scif3_device = { @@ -92,11 +100,13 @@ static struct platform_device scif3_device = { }, }; +/* SCIFA4 */ static struct plat_sci_port scif4_platform_data = { .mapbase = 0xe6c80000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 89, 89, 89, 89 }, + .irqs = { evt2irq(0xd20), evt2irq(0xd20), + evt2irq(0xd20), evt2irq(0xd20) }, }; static struct platform_device scif4_device = { @@ -107,11 +117,13 @@ static struct platform_device scif4_device = { }, }; +/* SCIFA5 */ static struct plat_sci_port scif5_platform_data = { .mapbase = 0xe6cb0000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 90, 90, 90, 90 }, + .irqs = { evt2irq(0xd40), evt2irq(0xd40), + evt2irq(0xd40), evt2irq(0xd40) }, }; static struct platform_device scif5_device = { @@ -122,11 +134,13 @@ static struct platform_device scif5_device = { }, }; +/* SCIFA6 */ static struct plat_sci_port scif6_platform_data = { .mapbase = 0xe6cc0000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 196, 196, 196, 196 }, + .irqs = { intcs_evt2irq(0x1a80), intcs_evt2irq(0x1a80), + intcs_evt2irq(0x1a80), intcs_evt2irq(0x1a80) }, }; static struct platform_device scif6_device = { @@ -137,11 +151,13 @@ static struct platform_device scif6_device = { }, }; +/* SCIFB */ static struct plat_sci_port scif7_platform_data = { .mapbase = 0xe6c30000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 91, 91, 91, 91 }, + .irqs = { evt2irq(0xd60), evt2irq(0xd60), + evt2irq(0xd60), evt2irq(0xd60) }, }; static struct platform_device scif7_device = { @@ -169,7 +185,7 @@ static struct resource cmt10_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 72, + .start = evt2irq(0xb00), /* CMT1_CMT10 */ .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h index 4f8f99aac938..b5e75bb44965 100644 --- a/arch/arm/mach-versatile/include/mach/hardware.h +++ b/arch/arm/mach-versatile/include/mach/hardware.h @@ -30,15 +30,6 @@ #define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul #define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul -#if 0 -#define VERSATILE_PCI_VIRT_MEM_BASE0 0xf4000000 -#define VERSATILE_PCI_VIRT_MEM_BASE1 0xf5000000 -#define VERSATILE_PCI_VIRT_MEM_BASE2 0xf6000000 - -#define PCIO_BASE VERSATILE_PCI_VIRT_MEM_BASE0 -#define PCIMEM_BASE VERSATILE_PCI_VIRT_MEM_BASE1 -#endif - /* CIK guesswork */ #define PCIBIOS_MIN_IO 0x44000000 #define PCIBIOS_MIN_MEM 0x50000000 diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index e1fd98fff8fa..33c3f570aaa0 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -771,8 +771,8 @@ config CACHE_L2X0 bool "Enable the L2x0 outer cache controller" depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \ - ARCH_NOMADIK || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \ - ARCH_TEGRA + ARCH_NOMADIK || ARCH_OMAP4 || ARCH_S5PV310 || ARCH_TEGRA || \ + ARCH_U8500 || ARCH_VEXPRESS_CA9X4 default y select OUTER_CACHE select OUTER_CACHE_SYNC diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index a17cc0c6a6b0..4aacdd12c9cc 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -4,7 +4,6 @@ obj-y := dma.o -obj-$(CONFIG_ARCH_PXA) += pmu.o obj-$(CONFIG_GENERIC_GPIO) += gpio.o obj-$(CONFIG_PXA3xx) += mfp.o obj-$(CONFIG_ARCH_MMP) += mfp.o diff --git a/arch/arm/plat-pxa/pmu.c b/arch/arm/plat-pxa/pmu.c deleted file mode 100644 index 267ceb6feb2f..000000000000 --- a/arch/arm/plat-pxa/pmu.c +++ /dev/null @@ -1,33 +0,0 @@ -/* - * PMU IRQ registration for the PXA xscale PMU families. - * Copyright (C) 2010 Will Deacon, ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/platform_device.h> -#include <asm/pmu.h> -#include <mach/irqs.h> - -static struct resource pmu_resource = { - .start = IRQ_PMU, - .end = IRQ_PMU, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device pmu_device = { - .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, - .resource = &pmu_resource, - .num_resources = 1, -}; - -static int __init pxa_pmu_init(void) -{ - platform_device_register(&pmu_device); - return 0; -} -arch_initcall(pxa_pmu_init); diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 11d6a1bbd90d..c6a855db2fb6 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -7,9 +7,10 @@ config PLAT_S5P bool - depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210) + depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310) default y - select ARM_VIC + select ARM_VIC if !ARCH_S5PV310 + select ARM_GIC if ARCH_S5PV310 select NO_IOPORT select ARCH_REQUIRE_GPIOLIB select S3C_GPIO_TRACK @@ -30,3 +31,18 @@ config S5P_EXT_INT help Use the external interrupts (other than GPIO interrupts.) Note: Do not choose this for S5P6440. + +config S5P_DEV_FIMC0 + bool + help + Compile in platform device definitions for FIMC controller 0 + +config S5P_DEV_FIMC1 + bool + help + Compile in platform device definitions for FIMC controller 1 + +config S5P_DEV_FIMC2 + bool + help + Compile in platform device definitions for FIMC controller 2 diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index 39c242bb9d58..b2e029673950 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -12,9 +12,15 @@ obj- := # Core files +obj-y += dev-pmu.o obj-y += dev-uart.o obj-y += cpu.o obj-y += clock.o obj-y += irq.o obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o +# devices + +obj-$(CONFIG_S5P_DEV_FIMC0) += dev-fimc0.o +obj-$(CONFIG_S5P_DEV_FIMC1) += dev-fimc1.o +obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index 75cb8c37ca2c..b07a078fd284 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -21,6 +21,7 @@ #include <plat/s5p6442.h> #include <plat/s5pc100.h> #include <plat/s5pv210.h> +#include <plat/s5pv310.h> /* table of supported CPUs */ @@ -28,6 +29,7 @@ static const char name_s5p6440[] = "S5P6440"; static const char name_s5p6442[] = "S5P6442"; static const char name_s5pc100[] = "S5PC100"; static const char name_s5pv210[] = "S5PV210/S5PC110"; +static const char name_s5pv310[] = "S5PV310"; static struct cpu_table cpu_ids[] __initdata = { { @@ -62,6 +64,14 @@ static struct cpu_table cpu_ids[] __initdata = { .init_uarts = s5pv210_init_uarts, .init = s5pv210_init, .name = name_s5pv210, + }, { + .idcode = 0x43200000, + .idmask = 0xfffff000, + .map_io = s5pv310_map_io, + .init_clocks = s5pv310_init_clocks, + .init_uarts = s5pv310_init_uarts, + .init = s5pv310_init, + .name = name_s5pv310, }, }; @@ -81,8 +91,9 @@ static struct map_desc s5p_iodesc[] __initdata = { }, { .virtual = (unsigned long)S3C_VA_UART, .pfn = __phys_to_pfn(S3C_PA_UART), - .length = SZ_4K, + .length = SZ_512K, .type = MT_DEVICE, +#ifdef CONFIG_ARM_VIC }, { .virtual = (unsigned long)VA_VIC0, .pfn = __phys_to_pfn(S5P_PA_VIC0), @@ -93,6 +104,7 @@ static struct map_desc s5p_iodesc[] __initdata = { .pfn = __phys_to_pfn(S5P_PA_VIC1), .length = SZ_16K, .type = MT_DEVICE, +#endif }, { .virtual = (unsigned long)S3C_VA_TIMER, .pfn = __phys_to_pfn(S5P_PA_TIMER), @@ -103,6 +115,11 @@ static struct map_desc s5p_iodesc[] __initdata = { .pfn = __phys_to_pfn(S5P_PA_GPIO), .length = SZ_4K, .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_WATCHDOG, + .pfn = __phys_to_pfn(S3C_PA_WDT), + .length = SZ_4K, + .type = MT_DEVICE, }, }; diff --git a/arch/arm/plat-s5p/dev-fimc0.c b/arch/arm/plat-s5p/dev-fimc0.c new file mode 100644 index 000000000000..d3f1a9b5d2b5 --- /dev/null +++ b/arch/arm/plat-s5p/dev-fimc0.c @@ -0,0 +1,36 @@ +/* linux/arch/arm/plat-s5p/dev-fimc0.c + * + * Copyright (c) 2010 Samsung Electronics + * + * Base S5P FIMC0 resource and device definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <mach/map.h> + +static struct resource s5p_fimc0_resource[] = { + [0] = { + .start = S5P_PA_FIMC0, + .end = S5P_PA_FIMC0 + SZ_1M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_FIMC0, + .end = IRQ_FIMC0, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s5p_device_fimc0 = { + .name = "s5p-fimc", + .id = 0, + .num_resources = ARRAY_SIZE(s5p_fimc0_resource), + .resource = s5p_fimc0_resource, +}; diff --git a/arch/arm/plat-s5p/dev-fimc1.c b/arch/arm/plat-s5p/dev-fimc1.c new file mode 100644 index 000000000000..41bd6986d0ad --- /dev/null +++ b/arch/arm/plat-s5p/dev-fimc1.c @@ -0,0 +1,36 @@ +/* linux/arch/arm/plat-s5p/dev-fimc1.c + * + * Copyright (c) 2010 Samsung Electronics + * + * Base S5P FIMC1 resource and device definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <mach/map.h> + +static struct resource s5p_fimc1_resource[] = { + [0] = { + .start = S5P_PA_FIMC1, + .end = S5P_PA_FIMC1 + SZ_1M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_FIMC1, + .end = IRQ_FIMC1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s5p_device_fimc1 = { + .name = "s5p-fimc", + .id = 1, + .num_resources = ARRAY_SIZE(s5p_fimc1_resource), + .resource = s5p_fimc1_resource, +}; diff --git a/arch/arm/plat-s5p/dev-fimc2.c b/arch/arm/plat-s5p/dev-fimc2.c new file mode 100644 index 000000000000..dfddeda6d4a3 --- /dev/null +++ b/arch/arm/plat-s5p/dev-fimc2.c @@ -0,0 +1,36 @@ +/* linux/arch/arm/plat-s5p/dev-fimc2.c + * + * Copyright (c) 2010 Samsung Electronics + * + * Base S5P FIMC2 resource and device definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <mach/map.h> + +static struct resource s5p_fimc2_resource[] = { + [0] = { + .start = S5P_PA_FIMC2, + .end = S5P_PA_FIMC2 + SZ_1M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_FIMC2, + .end = IRQ_FIMC2, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s5p_device_fimc2 = { + .name = "s5p-fimc", + .id = 2, + .num_resources = ARRAY_SIZE(s5p_fimc2_resource), + .resource = s5p_fimc2_resource, +}; diff --git a/arch/arm/plat-s5p/dev-pmu.c b/arch/arm/plat-s5p/dev-pmu.c new file mode 100644 index 000000000000..a08576da72b0 --- /dev/null +++ b/arch/arm/plat-s5p/dev-pmu.c @@ -0,0 +1,36 @@ +/* + * linux/arch/arm/plat-s5p/dev-pmu.c + * + * Copyright (C) 2010 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/platform_device.h> +#include <asm/pmu.h> +#include <mach/irqs.h> + +static struct resource s5p_pmu_resource = { + .start = IRQ_PMU, + .end = IRQ_PMU, + .flags = IORESOURCE_IRQ, +}; + +struct platform_device s5p_device_pmu = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = 1, + .resource = &s5p_pmu_resource, +}; + +static int __init s5p_pmu_init(void) +{ + platform_device_register(&s5p_device_pmu); + return 0; +} +arch_initcall(s5p_pmu_init); diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h index 14828521f70c..54e9fb9d315e 100644 --- a/arch/arm/plat-s5p/include/plat/map-s5p.h +++ b/arch/arm/plat-s5p/include/plat/map-s5p.h @@ -18,12 +18,27 @@ #define S5P_VA_SYSTIMER S3C_ADDR(0x01200000) #define S5P_VA_SROMC S3C_ADDR(0x01100000) -#define S5P_VA_UART0 (S3C_VA_UART + 0x0) -#define S5P_VA_UART1 (S3C_VA_UART + 0x400) -#define S5P_VA_UART2 (S3C_VA_UART + 0x800) -#define S5P_VA_UART3 (S3C_VA_UART + 0xC00) +#define S5P_VA_COMBINER_BASE S3C_ADDR(0x00600000) +#define S5P_VA_COMBINER(x) (S5P_VA_COMBINER_BASE + ((x) >> 2) * 0x10) +#define S5P_VA_COREPERI_BASE S3C_ADDR(0x00800000) +#define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x)) +#define S5P_VA_SCU S5P_VA_COREPERI(0x0) +#define S5P_VA_GIC_CPU S5P_VA_COREPERI(0x100) +#define S5P_VA_TWD S5P_VA_COREPERI(0x600) +#define S5P_VA_GIC_DIST S5P_VA_COREPERI(0x1000) + +#define S5P_VA_L2CC S3C_ADDR(0x00900000) + +#define S5P_VA_UART(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) +#define S5P_VA_UART0 S5P_VA_UART(0) +#define S5P_VA_UART1 S5P_VA_UART(1) +#define S5P_VA_UART2 S5P_VA_UART(2) +#define S5P_VA_UART3 S5P_VA_UART(3) + +#ifndef S3C_UART_OFFSET #define S3C_UART_OFFSET (0x400) +#endif #define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000)) #define VA_VIC0 VA_VIC(0) diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h index 7db322726bc2..4e8fe08cb70d 100644 --- a/arch/arm/plat-s5p/include/plat/pll.h +++ b/arch/arm/plat-s5p/include/plat/pll.h @@ -46,6 +46,47 @@ static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con, return (unsigned long)fvco; } +#define PLL46XX_KDIV_MASK (0xFFFF) +#define PLL46XX_MDIV_MASK (0x1FF) +#define PLL46XX_PDIV_MASK (0x3F) +#define PLL46XX_SDIV_MASK (0x7) +#define PLL46XX_MDIV_SHIFT (16) +#define PLL46XX_PDIV_SHIFT (8) +#define PLL46XX_SDIV_SHIFT (0) + +enum pll46xx_type_t { + pll_4600, + pll_4650, +}; + +static inline unsigned long s5p_get_pll46xx(unsigned long baseclk, + u32 pll_con0, u32 pll_con1, + enum pll46xx_type_t pll_type) +{ + unsigned long result; + u32 mdiv, pdiv, sdiv, kdiv; + u64 tmp; + + mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK; + pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK; + sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK; + kdiv = pll_con1 & PLL46XX_KDIV_MASK; + + tmp = baseclk; + + if (pll_type == pll_4600) { + tmp *= (mdiv << 16) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 16; + } else { + tmp *= (mdiv << 10) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 10; + } + + return result; +} + #define PLL90XX_MDIV_MASK (0xFF) #define PLL90XX_PDIV_MASK (0x3F) #define PLL90XX_SDIV_MASK (0x7) diff --git a/arch/arm/plat-s5p/include/plat/reset.h b/arch/arm/plat-s5p/include/plat/reset.h new file mode 100644 index 000000000000..335e97812eed --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/reset.h @@ -0,0 +1,16 @@ +/* linux/arch/arm/plat-s5p/include/plat/reset.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_S5P_RESET_H +#define __ASM_PLAT_S5P_RESET_H __FILE__ + +extern void (*s5p_reset_hook)(void); + +#endif /* __ASM_PLAT_S5P_RESET_H */ diff --git a/arch/arm/plat-s5p/include/plat/s5pv310.h b/arch/arm/plat-s5p/include/plat/s5pv310.h new file mode 100644 index 000000000000..769c991ceb37 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/s5pv310.h @@ -0,0 +1,34 @@ +/* linux/arch/arm/plat-s5p/include/plat/s5pv310.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Header file for s5pv310 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Common init code for S5PV310 related SoCs */ + +extern void s5pv310_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s5pv310_register_clocks(void); +extern void s5pv310_setup_clocks(void); + +#ifdef CONFIG_CPU_S5PV310 + +extern int s5pv310_init(void); +extern void s5pv310_init_irq(void); +extern void s5pv310_map_io(void); +extern void s5pv310_init_clocks(int xtal); +extern struct sys_timer s5pv310_timer; + +#define s5pv310_init_uarts s5pv310_common_init_uarts + +#else +#define s5pv310_init_clocks NULL +#define s5pv310_init_uarts NULL +#define s5pv310_map_io NULL +#define s5pv310_init NULL +#endif diff --git a/arch/arm/plat-s5p/include/plat/system-reset.h b/arch/arm/plat-s5p/include/plat/system-reset.h new file mode 100644 index 000000000000..f307f34e6422 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/system-reset.h @@ -0,0 +1,31 @@ +/* linux/arch/arm/plat-s5p/include/plat/system-reset.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Based on arch/arm/mach-s3c2410/include/mach/system-reset.h + * + * S5P - System define for arch_reset() + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <plat/watchdog-reset.h> + +void (*s5p_reset_hook)(void); + +static void arch_reset(char mode, const char *cmd) +{ + /* SWRESET support in s5p_reset_hook() */ + + if (s5p_reset_hook) + s5p_reset_hook(); + + /* Perform reset using Watchdog reset + * if there is no s5p_reset_hook() + */ + + arch_wdt_reset(); +} diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c index 25e1eb6de59e..5560b12035d1 100644 --- a/arch/arm/plat-s5p/irq.c +++ b/arch/arm/plat-s5p/irq.c @@ -56,11 +56,13 @@ static struct s3c_uart_irq uart_irqs[] = { void __init s5p_init_irq(u32 *vic, u32 num_vic) { +#ifdef CONFIG_ARM_VIC int irq; /* initialize the VICs */ for (irq = 0; irq < num_vic; irq++) vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0); +#endif s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0); s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1); diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 2753fb3e4f73..4529dd6232bc 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -160,6 +160,11 @@ config S3C_DEV_HSMMC2 help Compile in platform device definitions for HSMMC channel 2 +config S3C_DEV_HSMMC3 + bool + help + Compile in platform device definitions for HSMMC channel 3 + config S3C_DEV_HWMON bool help @@ -216,6 +221,11 @@ config SAMSUNG_DEV_ADC help Compile in platform device definition for ADC controller +config SAMSUNG_DEV_IDE + bool + help + Compile in platform device definitions for IDE + config S3C64XX_DEV_SPI bool help @@ -227,6 +237,11 @@ config SAMSUNG_DEV_TS help Common in platform device definitions for touchscreen device +config SAMSUNG_DEV_KEYPAD + bool + help + Compile in platform device definitions for keypad + # DMA config S3C_DMA diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index b1d82cc5e716..4d8ff923207a 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -12,7 +12,7 @@ obj- := # Objects we always build independent of SoC choice obj-y += init.o -obj-y += time.o +obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o obj-y += clock.o obj-y += pwm-clock.o obj-y += gpio.o @@ -30,9 +30,12 @@ obj-$(CONFIG_S3C_ADC) += adc.o # devices +obj-y += platformdata.o + obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o +obj-$(CONFIG_S3C_DEV_HSMMC3) += dev-hsmmc3.o obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o obj-y += dev-i2c0.o obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o @@ -47,7 +50,9 @@ obj-$(CONFIG_S3C_DEV_ONENAND) += dev-onenand.o obj-$(CONFIG_S3C_DEV_RTC) += dev-rtc.o obj-$(CONFIG_SAMSUNG_DEV_ADC) += dev-adc.o +obj-$(CONFIG_SAMSUNG_DEV_IDE) += dev-ide.o obj-$(CONFIG_SAMSUNG_DEV_TS) += dev-ts.o +obj-$(CONFIG_SAMSUNG_DEV_KEYPAD) += dev-keypad.o # DMA support diff --git a/arch/arm/plat-samsung/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c index 4c05b39810e2..b0f93f11e281 100644 --- a/arch/arm/plat-samsung/dev-hsmmc.c +++ b/arch/arm/plat-samsung/dev-hsmmc.c @@ -60,6 +60,11 @@ void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd) struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata; set->max_width = pd->max_width; + set->cd_type = pd->cd_type; + set->ext_cd_init = pd->ext_cd_init; + set->ext_cd_cleanup = pd->ext_cd_cleanup; + set->ext_cd_gpio = pd->ext_cd_gpio; + set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; if (pd->cfg_gpio) set->cfg_gpio = pd->cfg_gpio; diff --git a/arch/arm/plat-samsung/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c index e49bc4cd0ee6..1504fd802865 100644 --- a/arch/arm/plat-samsung/dev-hsmmc1.c +++ b/arch/arm/plat-samsung/dev-hsmmc1.c @@ -60,6 +60,11 @@ void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd) struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata; set->max_width = pd->max_width; + set->cd_type = pd->cd_type; + set->ext_cd_init = pd->ext_cd_init; + set->ext_cd_cleanup = pd->ext_cd_cleanup; + set->ext_cd_gpio = pd->ext_cd_gpio; + set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; if (pd->cfg_gpio) set->cfg_gpio = pd->cfg_gpio; diff --git a/arch/arm/plat-samsung/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c index 824580bc0e06..b28ef173444d 100644 --- a/arch/arm/plat-samsung/dev-hsmmc2.c +++ b/arch/arm/plat-samsung/dev-hsmmc2.c @@ -61,6 +61,11 @@ void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd) struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata; set->max_width = pd->max_width; + set->cd_type = pd->cd_type; + set->ext_cd_init = pd->ext_cd_init; + set->ext_cd_cleanup = pd->ext_cd_cleanup; + set->ext_cd_gpio = pd->ext_cd_gpio; + set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; if (pd->cfg_gpio) set->cfg_gpio = pd->cfg_gpio; diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c new file mode 100644 index 000000000000..85aaf0f2842f --- /dev/null +++ b/arch/arm/plat-samsung/dev-hsmmc3.c @@ -0,0 +1,77 @@ +/* linux/arch/arm/plat-samsung/dev-hsmmc3.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Based on arch/arm/plat-samsung/dev-hsmmc1.c + * + * Samsung device definition for hsmmc device 3 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mmc/host.h> + +#include <mach/map.h> +#include <plat/sdhci.h> +#include <plat/devs.h> + +#define S3C_SZ_HSMMC (0x1000) + +static struct resource s3c_hsmmc3_resource[] = { + [0] = { + .start = S3C_PA_HSMMC3, + .end = S3C_PA_HSMMC3 + S3C_SZ_HSMMC - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_MMC3, + .end = IRQ_MMC3, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 s3c_device_hsmmc3_dmamask = 0xffffffffUL; + +struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = { + .max_width = 4, + .host_caps = (MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), +}; + +struct platform_device s3c_device_hsmmc3 = { + .name = "s3c-sdhci", + .id = 3, + .num_resources = ARRAY_SIZE(s3c_hsmmc3_resource), + .resource = s3c_hsmmc3_resource, + .dev = { + .dma_mask = &s3c_device_hsmmc3_dmamask, + .coherent_dma_mask = 0xffffffffUL, + .platform_data = &s3c_hsmmc3_def_platdata, + }, +}; + +void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd) +{ + struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata; + + set->max_width = pd->max_width; + set->cd_type = pd->cd_type; + set->ext_cd_init = pd->ext_cd_init; + set->ext_cd_cleanup = pd->ext_cd_cleanup; + set->ext_cd_gpio = pd->ext_cd_gpio; + set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; + + if (pd->cfg_gpio) + set->cfg_gpio = pd->cfg_gpio; + if (pd->cfg_card) + set->cfg_card = pd->cfg_card; +} diff --git a/arch/arm/plat-samsung/dev-ide.c b/arch/arm/plat-samsung/dev-ide.c new file mode 100644 index 000000000000..b497982795a7 --- /dev/null +++ b/arch/arm/plat-samsung/dev-ide.c @@ -0,0 +1,44 @@ +/* linux/arch/arm/plat-samsung/dev-ide.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung CF-ATA device definition. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <mach/map.h> +#include <plat/ata.h> +#include <plat/devs.h> + +static struct resource s3c_cfcon_resource[] = { + [0] = { + .start = SAMSUNG_PA_CFCON, + .end = SAMSUNG_PA_CFCON + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_CFCON, + .end = IRQ_CFCON, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_cfcon = { + .id = 0, + .num_resources = ARRAY_SIZE(s3c_cfcon_resource), + .resource = s3c_cfcon_resource, +}; + +void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata) +{ + s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata), + &s3c_device_cfcon); +} diff --git a/arch/arm/plat-samsung/dev-keypad.c b/arch/arm/plat-samsung/dev-keypad.c new file mode 100644 index 000000000000..677c2d731b65 --- /dev/null +++ b/arch/arm/plat-samsung/dev-keypad.c @@ -0,0 +1,50 @@ +/* + * linux/arch/arm/plat-samsung/dev-keypad.c + * + * Copyright (C) 2010 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/platform_device.h> +#include <mach/irqs.h> +#include <mach/map.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/keypad.h> + +static struct resource samsung_keypad_resources[] = { + [0] = { + .start = SAMSUNG_PA_KEYPAD, + .end = SAMSUNG_PA_KEYPAD + 0x20 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_KEYPAD, + .end = IRQ_KEYPAD, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device samsung_device_keypad = { + .name = "samsung-keypad", + .id = -1, + .num_resources = ARRAY_SIZE(samsung_keypad_resources), + .resource = samsung_keypad_resources, +}; + +void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd) +{ + struct samsung_keypad_platdata *npd; + + npd = s3c_set_platdata(pd, sizeof(struct samsung_keypad_platdata), + &samsung_device_keypad); + + if (!npd->cfg_gpio) + npd->cfg_gpio = samsung_keypad_cfg_gpio; +} diff --git a/arch/arm/plat-samsung/dev-wdt.c b/arch/arm/plat-samsung/dev-wdt.c index 5efca87cddbd..019b5b8cf14c 100644 --- a/arch/arm/plat-samsung/dev-wdt.c +++ b/arch/arm/plat-samsung/dev-wdt.c @@ -21,7 +21,7 @@ static struct resource s3c_wdt_resource[] = { [0] = { .start = S3C_PA_WDT, - .end = S3C_PA_WDT + SZ_1M - 1, + .end = S3C_PA_WDT + SZ_1K, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/arm/plat-samsung/gpiolib.c b/arch/arm/plat-samsung/gpiolib.c index 8a8ba8bc1d96..c354089254fc 100644 --- a/arch/arm/plat-samsung/gpiolib.c +++ b/arch/arm/plat-samsung/gpiolib.c @@ -18,7 +18,7 @@ #include <linux/kernel.h> #include <linux/irq.h> #include <linux/io.h> -#include <mach/gpio.h> +#include <linux/gpio.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> diff --git a/arch/arm/plat-samsung/include/plat/adc-core.h b/arch/arm/plat-samsung/include/plat/adc-core.h new file mode 100644 index 000000000000..a281568d5856 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/adc-core.h @@ -0,0 +1,28 @@ +/* linux/arch/arm/plat-samsung/include/plat/adc-core.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Samsung ADC Controller core functions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_ADC_CORE_H +#define __ASM_PLAT_ADC_CORE_H __FILE__ + +/* These functions are only for use with the core support code, such as + * the cpu specific initialisation code + */ + +/* re-define device name depending on support. */ +static inline void s3c_adc_setname(char *name) +{ +#ifdef CONFIG_SAMSUNG_DEV_ADC + s3c_device_adc.name = name; +#endif +} + +#endif /* __ASM_PLAT_ADC_CORE_H */ diff --git a/arch/arm/plat-samsung/include/plat/ata-core.h b/arch/arm/plat-samsung/include/plat/ata-core.h new file mode 100644 index 000000000000..f5a4ec7141b1 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/ata-core.h @@ -0,0 +1,28 @@ +/* linux/arch/arm/plat-samsung/include/plat/ata-core.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung CF-ATA Controller core functions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_ATA_CORE_H +#define __ASM_PLAT_ATA_CORE_H __FILE__ + +/* These functions are only for use with the core support code, such as + * the cpu specific initialisation code +*/ + +/* re-define device name depending on support. */ +static inline void s3c_cfcon_setname(char *name) +{ +#ifdef CONFIG_SAMSUNG_DEV_IDE + s3c_device_cfcon.name = name; +#endif +} + +#endif /* __ASM_PLAT_ATA_CORE_H */ diff --git a/arch/arm/plat-samsung/include/plat/ata.h b/arch/arm/plat-samsung/include/plat/ata.h new file mode 100644 index 000000000000..2a3855a8372a --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/ata.h @@ -0,0 +1,36 @@ +/* linux/arch/arm/plat-samsung/include/plat/ata.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung CF-ATA platform_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_ATA_H +#define __ASM_PLAT_ATA_H __FILE__ + +/** + * struct s3c_ide_platdata - S3C IDE driver platform data. + * @setup_gpio: Setup the external GPIO pins to the right state for data + * transfer in true-ide mode. + */ +struct s3c_ide_platdata { + void (*setup_gpio)(void); +}; + +/* + * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver. + * @pdata: Platform data for IDE driver. + */ +extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata); + +/* architecture-specific IDE configuration */ +extern void s3c64xx_ide_setup_gpio(void); +extern void s5pc100_ide_setup_gpio(void); +extern void s5pv210_ide_setup_gpio(void); + +#endif /*__ASM_PLAT_ATA_H */ diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index e6144e4b9118..85f6f23a510f 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -54,6 +54,8 @@ extern struct platform_device s3c_device_hwmon; extern struct platform_device s3c_device_hsmmc0; extern struct platform_device s3c_device_hsmmc1; extern struct platform_device s3c_device_hsmmc2; +extern struct platform_device s3c_device_hsmmc3; +extern struct platform_device s3c_device_cfcon; extern struct platform_device s3c_device_spi0; extern struct platform_device s3c_device_spi1; @@ -100,6 +102,12 @@ extern struct platform_device s5pc100_device_iis0; extern struct platform_device s5pc100_device_iis1; extern struct platform_device s5pc100_device_iis2; +extern struct platform_device samsung_device_keypad; + +extern struct platform_device s5p_device_fimc0; +extern struct platform_device s5p_device_fimc1; +extern struct platform_device s5p_device_fimc2; + /* s3c2440 specific devices */ #ifdef CONFIG_CPU_S3C2440 @@ -108,3 +116,15 @@ extern struct platform_device s3c_device_camif; extern struct platform_device s3c_device_ac97; #endif + +/** + * s3c_set_platdata() - helper for setting platform data + * @pd: The default platform data for this device. + * @pdsize: The size of the platform data. + * @pdev: Pointer to the device to fill in. + * + * This helper replaces a number of calls that copy and then set the + * platform data of the device. + */ +extern void *s3c_set_platdata(void *pd, size_t pdsize, + struct platform_device *pdev); diff --git a/arch/arm/plat-samsung/include/plat/fimc-core.h b/arch/arm/plat-samsung/include/plat/fimc-core.h new file mode 100644 index 000000000000..81a3bfeeccad --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/fimc-core.h @@ -0,0 +1,44 @@ +/* + * arch/arm/plat-samsung/include/plat/fimc-core.h + * + * Copyright 2010 Samsung Electronics Co., Ltd. + * Sylwester Nawrocki <s.nawrocki@samsung.com> + * + * Samsung camera interface driver core functions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_PLAT_FIMC_CORE_H +#define __ASM_PLAT_FIMC_CORE_H __FILE__ + +/* + * These functions are only for use with the core support code, such as + * the CPU-specific initialization code. + */ + +/* Re-define device name to differentiate the subsystem in various SoCs. */ +static inline void s3c_fimc_setname(int id, char *name) +{ + switch (id) { +#ifdef CONFIG_S5P_DEV_FIMC0 + case 0: + s5p_device_fimc0.name = name; + break; +#endif +#ifdef CONFIG_S5P_DEV_FIMC1 + case 1: + s5p_device_fimc1.name = name; + break; +#endif +#ifdef CONFIG_S5P_DEV_FIMC2 + case 2: + s5p_device_fimc2.name = name; + break; +#endif + } +} + +#endif /* __ASM_PLAT_FIMC_CORE_H */ diff --git a/arch/arm/plat-samsung/include/plat/keypad-core.h b/arch/arm/plat-samsung/include/plat/keypad-core.h new file mode 100644 index 000000000000..d513e1b3a31e --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/keypad-core.h @@ -0,0 +1,31 @@ +/* + * linux/arch/arm/plat-samsung/include/plat/keypad-core.h + * + * Copyright (C) 2010 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * + * Samsung keypad controller core function + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __ASM_ARCH_KEYPAD_CORE_H +#define __ASM_ARCH_KEYPAD_CORE_H + +/* These function are only for use with the core support code, such as + * the cpu specific initialisation code + */ + +/* re-define device name depending on support. */ +static inline void samsung_keypad_setname(char *name) +{ +#ifdef CONFIG_SAMSUNG_DEV_KEYPAD + samsung_device_keypad.name = name; +#endif +} + +#endif /* __ASM_ARCH_KEYPAD_CORE_H */ diff --git a/arch/arm/plat-samsung/include/plat/keypad.h b/arch/arm/plat-samsung/include/plat/keypad.h index 3a70c125fe51..b59a6483cd8a 100644 --- a/arch/arm/plat-samsung/include/plat/keypad.h +++ b/arch/arm/plat-samsung/include/plat/keypad.h @@ -40,4 +40,17 @@ struct samsung_keypad_platdata { void (*cfg_gpio)(unsigned int rows, unsigned int cols); }; +/** + * samsung_keypad_set_platdata - Set platform data for Samsung Keypad device. + * @pd: Platform data to register to device. + * + * Register the given platform data for use with Samsung Keypad device. + * The call will copy the platform data, so the board definitions can + * make the structure itself __initdata. + */ +extern void samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd); + +/* defined by architecture to configure gpio. */ +extern void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols); + #endif /* __PLAT_SAMSUNG_KEYPAD_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-ata.h b/arch/arm/plat-samsung/include/plat/regs-ata.h new file mode 100644 index 000000000000..f5df92fdae26 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-ata.h @@ -0,0 +1,56 @@ +/* linux/arch/arm/plat-samsung/include/plat/regs-ata.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung CF-ATA register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_REGS_ATA_H +#define __ASM_PLAT_REGS_ATA_H __FILE__ + +#define S3C_CFATA_REG(x) (x) + +#define S3C_CFATA_MUX S3C_CFATA_REG(0x0) + +#define S3C_ATA_CTRL S3C_CFATA_REG(0x0) +#define S3C_ATA_STATUS S3C_CFATA_REG(0x4) +#define S3C_ATA_CMD S3C_CFATA_REG(0x8) +#define S3C_ATA_SWRST S3C_CFATA_REG(0xc) +#define S3C_ATA_IRQ S3C_CFATA_REG(0x10) +#define S3C_ATA_IRQ_MSK S3C_CFATA_REG(0x14) +#define S3C_ATA_CFG S3C_CFATA_REG(0x18) + +#define S3C_ATA_MDMA_TIME S3C_CFATA_REG(0x28) +#define S3C_ATA_PIO_TIME S3C_CFATA_REG(0x2c) +#define S3C_ATA_UDMA_TIME S3C_CFATA_REG(0x30) +#define S3C_ATA_XFR_NUM S3C_CFATA_REG(0x34) +#define S3C_ATA_XFR_CNT S3C_CFATA_REG(0x38) +#define S3C_ATA_TBUF_START S3C_CFATA_REG(0x3c) +#define S3C_ATA_TBUF_SIZE S3C_CFATA_REG(0x40) +#define S3C_ATA_SBUF_START S3C_CFATA_REG(0x44) +#define S3C_ATA_SBUF_SIZE S3C_CFATA_REG(0x48) +#define S3C_ATA_CADR_TBUF S3C_CFATA_REG(0x4c) +#define S3C_ATA_CADR_SBUF S3C_CFATA_REG(0x50) +#define S3C_ATA_PIO_DTR S3C_CFATA_REG(0x54) +#define S3C_ATA_PIO_FED S3C_CFATA_REG(0x58) +#define S3C_ATA_PIO_SCR S3C_CFATA_REG(0x5c) +#define S3C_ATA_PIO_LLR S3C_CFATA_REG(0x60) +#define S3C_ATA_PIO_LMR S3C_CFATA_REG(0x64) +#define S3C_ATA_PIO_LHR S3C_CFATA_REG(0x68) +#define S3C_ATA_PIO_DVR S3C_CFATA_REG(0x6c) +#define S3C_ATA_PIO_CSD S3C_CFATA_REG(0x70) +#define S3C_ATA_PIO_DAD S3C_CFATA_REG(0x74) +#define S3C_ATA_PIO_READY S3C_CFATA_REG(0x78) +#define S3C_ATA_PIO_RDATA S3C_CFATA_REG(0x7c) + +#define S3C_CFATA_MUX_TRUEIDE 0x01 + +#define S3C_ATA_CFG_SWAP 0x40 +#define S3C_ATA_CFG_IORDYEN 0x02 + +#endif /* __ASM_PLAT_REGS_ATA_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h index 65c190d142dd..30b7cc14cef5 100644 --- a/arch/arm/plat-samsung/include/plat/regs-rtc.h +++ b/arch/arm/plat-samsung/include/plat/regs-rtc.h @@ -14,6 +14,9 @@ #define __ASM_ARCH_REGS_RTC_H __FILE__ #define S3C2410_RTCREG(x) (x) +#define S3C2410_INTP S3C2410_RTCREG(0x30) +#define S3C2410_INTP_ALM (1 << 1) +#define S3C2410_INTP_TIC (1 << 0) #define S3C2410_RTCCON S3C2410_RTCREG(0x40) #define S3C2410_RTCCON_RTCEN (1<<0) diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index a6eba8496b24..788837e99cb3 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -259,6 +259,8 @@ struct s3c2410_uartcfg { unsigned short flags; upf_t uart_flags; /* default uart flags */ + unsigned int has_fracval; + unsigned long ucon; /* value of ucon for port */ unsigned long ulcon; /* value of ulcon for port */ unsigned long ufcon; /* value of ufcon for port */ diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 016674fa20dd..30844c263d03 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -20,10 +20,31 @@ struct mmc_host; struct mmc_card; struct mmc_ios; +enum cd_types { + S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */ + S3C_SDHCI_CD_EXTERNAL, /* use external callback */ + S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */ + S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */ + S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */ +}; + /** * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI * @max_width: The maximum number of data bits supported. * @host_caps: Standard MMC host capabilities bit field. + * @cd_type: Type of Card Detection method (see cd_types enum above) + * @ext_cd_init: Initialize external card detect subsystem. Called on + * sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL. + * notify_func argument is a callback to the sdhci-s3c driver + * that triggers the card detection event. Callback arguments: + * dev is pointer to platform device of the host controller, + * state is new state of the card (0 - removed, 1 - inserted). + * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on + * sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL. + * notify_func argument is the same callback as for ext_cd_init. + * @ext_cd_gpio: gpio pin used for external CD line, valid only if + * cd_type == S3C_SDHCI_CD_GPIO + * @ext_cd_gpio_invert: invert values for external CD gpio line * @cfg_gpio: Configure the GPIO for a specific card bit-width * @cfg_card: Configure the interface for a specific card and speed. This * is necessary the controllers and/or GPIO blocks require the @@ -37,9 +58,17 @@ struct mmc_ios; struct s3c_sdhci_platdata { unsigned int max_width; unsigned int host_caps; + enum cd_types cd_type; char **clocks; /* set of clock sources */ + int ext_cd_gpio; + bool ext_cd_gpio_invert; + int (*ext_cd_init)(void (*notify_func)(struct platform_device *, + int state)); + int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *, + int state)); + void (*cfg_gpio)(struct platform_device *dev, int width); void (*cfg_card)(struct platform_device *dev, void __iomem *regbase, @@ -58,6 +87,7 @@ struct s3c_sdhci_platdata { extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd); extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd); extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd); +extern void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd); /* Default platform data, exported so that per-cpu initialisation can * set the correct one when there are more than one cpu type selected. @@ -66,6 +96,7 @@ extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd); extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata; extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata; extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata; +extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata; /* Helper function availablity */ @@ -78,13 +109,13 @@ extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w); +extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w); -/* S3C6400 SDHCI setup */ +/* S3C64XX SDHCI setup */ #ifdef CONFIG_S3C64XX_SETUP_SDHCI extern char *s3c64xx_hsmmc_clksrcs[4]; -#ifdef CONFIG_S3C_DEV_HSMMC extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r, struct mmc_ios *ios, @@ -92,76 +123,62 @@ extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev, static inline void s3c6400_default_sdhci0(void) { +#ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio; s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; +#endif } -#else -static inline void s3c6400_default_sdhci0(void) { } -#endif /* CONFIG_S3C_DEV_HSMMC */ - -#ifdef CONFIG_S3C_DEV_HSMMC1 static inline void s3c6400_default_sdhci1(void) { +#ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio; s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; +#endif } -#else -static inline void s3c6400_default_sdhci1(void) { } -#endif /* CONFIG_S3C_DEV_HSMMC1 */ -#ifdef CONFIG_S3C_DEV_HSMMC2 static inline void s3c6400_default_sdhci2(void) { +#ifdef CONFIG_S3C_DEV_HSMMC2 s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio; s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; +#endif } -#else -static inline void s3c6400_default_sdhci2(void) { } -#endif /* CONFIG_S3C_DEV_HSMMC2 */ - -/* S3C6410 SDHCI setup */ extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r, struct mmc_ios *ios, struct mmc_card *card); -#ifdef CONFIG_S3C_DEV_HSMMC static inline void s3c6410_default_sdhci0(void) { +#ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio; s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card; +#endif } -#else -static inline void s3c6410_default_sdhci0(void) { } -#endif /* CONFIG_S3C_DEV_HSMMC */ -#ifdef CONFIG_S3C_DEV_HSMMC1 static inline void s3c6410_default_sdhci1(void) { +#ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio; s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card; +#endif } -#else -static inline void s3c6410_default_sdhci1(void) { } -#endif /* CONFIG_S3C_DEV_HSMMC1 */ -#ifdef CONFIG_S3C_DEV_HSMMC2 static inline void s3c6410_default_sdhci2(void) { +#ifdef CONFIG_S3C_DEV_HSMMC2 s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio; s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card; +#endif } -#else -static inline void s3c6410_default_sdhci2(void) { } -#endif /* CONFIG_S3C_DEV_HSMMC2 */ #else static inline void s3c6410_default_sdhci0(void) { } @@ -183,48 +200,42 @@ extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev, struct mmc_ios *ios, struct mmc_card *card); -#ifdef CONFIG_S3C_DEV_HSMMC static inline void s5pc100_default_sdhci0(void) { +#ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio; s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card; +#endif } -#else -static inline void s5pc100_default_sdhci0(void) { } -#endif /* CONFIG_S3C_DEV_HSMMC */ -#ifdef CONFIG_S3C_DEV_HSMMC1 static inline void s5pc100_default_sdhci1(void) { +#ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio; s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card; +#endif } -#else -static inline void s5pc100_default_sdhci1(void) { } -#endif /* CONFIG_S3C_DEV_HSMMC1 */ -#ifdef CONFIG_S3C_DEV_HSMMC2 static inline void s5pc100_default_sdhci2(void) { +#ifdef CONFIG_S3C_DEV_HSMMC2 s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio; s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card; +#endif } -#else -static inline void s5pc100_default_sdhci2(void) { } -#endif /* CONFIG_S3C_DEV_HSMMC1 */ - #else static inline void s5pc100_default_sdhci0(void) { } static inline void s5pc100_default_sdhci1(void) { } static inline void s5pc100_default_sdhci2(void) { } + #endif /* CONFIG_S5PC100_SETUP_SDHCI */ +/* S5PV210 SDHCI setup */ -/* S5PC110 SDHCI setup */ #ifdef CONFIG_S5PV210_SETUP_SDHCI extern char *s5pv210_hsmmc_clksrcs[4]; @@ -233,46 +244,48 @@ extern void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev, struct mmc_ios *ios, struct mmc_card *card); -#ifdef CONFIG_S3C_DEV_HSMMC static inline void s5pv210_default_sdhci0(void) { +#ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio; s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; +#endif } -#else -static inline void s5pv210_default_sdhci0(void) { } -#endif /* CONFIG_S3C_DEV_HSMMC */ -#ifdef CONFIG_S3C_DEV_HSMMC1 static inline void s5pv210_default_sdhci1(void) { +#ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio; s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; +#endif } -#else -static inline void s5pv210_default_sdhci1(void) { } -#endif /* CONFIG_S3C_DEV_HSMMC1 */ -#ifdef CONFIG_S3C_DEV_HSMMC2 static inline void s5pv210_default_sdhci2(void) { +#ifdef CONFIG_S3C_DEV_HSMMC2 s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio; s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; +#endif +} + +static inline void s5pv210_default_sdhci3(void) +{ +#ifdef CONFIG_S3C_DEV_HSMMC3 + s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs; + s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio; + s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; +#endif } -#else -static inline void s5pv210_default_sdhci2(void) { } -#endif /* CONFIG_S3C_DEV_HSMMC2 */ #else static inline void s5pv210_default_sdhci0(void) { } static inline void s5pv210_default_sdhci1(void) { } static inline void s5pv210_default_sdhci2(void) { } -#endif /* CONFIG_S5PC100_SETUP_SDHCI */ - - +static inline void s5pv210_default_sdhci3(void) { } +#endif /* CONFIG_S5PV210_SETUP_SDHCI */ #endif /* __PLAT_S3C_SDHCI_H */ diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c new file mode 100644 index 000000000000..7cf2e1e3b20f --- /dev/null +++ b/arch/arm/plat-samsung/platformdata.c @@ -0,0 +1,37 @@ +/* linux/arch/arm/plat-samsung/platformdata.c + * + * Copyright 2010 Ben Dooks <ben-linux <at> fluff.org> + * + * Helper for platform data setting + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <plat/devs.h> + +void __init *s3c_set_platdata(void *pd, size_t pdsize, + struct platform_device *pdev) +{ + void *npd; + + if (!pd) { + /* too early to use dev_name(), may not be registered */ + printk(KERN_ERR "%s: no platform data supplied\n", pdev->name); + return NULL; + } + + npd = kmemdup(pd, pdsize, GFP_KERNEL); + if (!npd) { + printk(KERN_ERR "%s: cannot clone platform data\n", pdev->name); + return NULL; + } + + pdev->dev.platform_data = npd; + return npd; +} diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index de375b64e410..3da116f47f01 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -154,7 +154,7 @@ static struct platform_device nand_flash_device = { #define PORT_DRVCRA 0xA405018A #define PORT_DRVCRB 0xA405018C -static void ap320_wvga_power_on(void *board_data) +static void ap320_wvga_power_on(void *board_data, struct fb_info *info) { msleep(100); diff --git a/arch/sh/boards/mach-kfr2r09/Makefile b/arch/sh/boards/mach-kfr2r09/Makefile index 4e577a3bf658..60dd63f4a427 100644 --- a/arch/sh/boards/mach-kfr2r09/Makefile +++ b/arch/sh/boards/mach-kfr2r09/Makefile @@ -1,2 +1,4 @@ -obj-y := setup.o sdram.o -obj-$(CONFIG_FB_SH_MOBILE_LCDC) += lcd_wqvga.o +obj-y := setup.o sdram.o +ifneq ($(CONFIG_FB_SH_MOBILE_LCDC),) +obj-y += lcd_wqvga.o +endif diff --git a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c index e9b970846c41..25e145fb7087 100644 --- a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c +++ b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c @@ -327,7 +327,7 @@ static int kfr2r09_lcd_backlight(int on) return 0; } -void kfr2r09_lcd_on(void *board_data) +void kfr2r09_lcd_on(void *board_data, struct fb_info *info) { kfr2r09_lcd_backlight(1); } diff --git a/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h b/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h index 484ef42c2fb5..07e635b0e04c 100644 --- a/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h +++ b/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h @@ -3,23 +3,23 @@ #include <video/sh_mobile_lcdc.h> -#ifdef CONFIG_FB_SH_MOBILE_LCDC -void kfr2r09_lcd_on(void *board_data); +#if defined(CONFIG_FB_SH_MOBILE_LCDC) || defined(CONFIG_FB_SH_MOBILE_LCDC_MODULE) +void kfr2r09_lcd_on(void *board_data, struct fb_info *info); void kfr2r09_lcd_off(void *board_data); int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle, struct sh_mobile_lcdc_sys_bus_ops *sys_ops); void kfr2r09_lcd_start(void *board_data, void *sys_ops_handle, struct sh_mobile_lcdc_sys_bus_ops *sys_ops); #else -static inline void kfr2r09_lcd_on(void *board_data) {} -static inline void kfr2r09_lcd_off(void *board_data) {} -static inline int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle, - struct sh_mobile_lcdc_sys_bus_ops *sys_ops) +static void kfr2r09_lcd_on(void *board_data) {} +static void kfr2r09_lcd_off(void *board_data) {} +static int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops) { return -ENODEV; } -static inline void kfr2r09_lcd_start(void *board_data, void *sys_ops_handle, - struct sh_mobile_lcdc_sys_bus_ops *sys_ops) +static void kfr2r09_lcd_start(void *board_data, void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops) { } #endif |
