summaryrefslogtreecommitdiffstats
path: root/arch/sh/boards/mach-microdev/io.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards/mach-microdev/io.c')
-rw-r--r--arch/sh/boards/mach-microdev/io.c367
1 files changed, 367 insertions, 0 deletions
diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c
new file mode 100644
index 000000000000..9f8a540f7e14
--- /dev/null
+++ b/arch/sh/boards/mach-microdev/io.c
@@ -0,0 +1,367 @@
+/*
+ * linux/arch/sh/boards/superh/microdev/io.c
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ * Copyright (C) 2003, 2004 SuperH, Inc.
+ * Copyright (C) 2004 Paul Mundt
+ *
+ * SuperH SH4-202 MicroDev board support.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+#include <asm/microdev.h>
+
+ /*
+ * we need to have a 'safe' address to re-direct all I/O requests
+ * that we do not explicitly wish to handle. This safe address
+ * must have the following properies:
+ *
+ * * writes are ignored (no exception)
+ * * reads are benign (no side-effects)
+ * * accesses of width 1, 2 and 4-bytes are all valid.
+ *
+ * The Processor Version Register (PVR) has these properties.
+ */
+#define PVR 0xff000030 /* Processor Version Register */
+
+
+#define IO_IDE2_BASE 0x170ul /* I/O base for SMSC FDC37C93xAPM IDE #2 */
+#define IO_IDE1_BASE 0x1f0ul /* I/O base for SMSC FDC37C93xAPM IDE #1 */
+#define IO_ISP1161_BASE 0x290ul /* I/O port for Philips ISP1161x USB chip */
+#define IO_SERIAL2_BASE 0x2f8ul /* I/O base for SMSC FDC37C93xAPM Serial #2 */
+#define IO_LAN91C111_BASE 0x300ul /* I/O base for SMSC LAN91C111 Ethernet chip */
+#define IO_IDE2_MISC 0x376ul /* I/O misc for SMSC FDC37C93xAPM IDE #2 */
+#define IO_SUPERIO_BASE 0x3f0ul /* I/O base for SMSC FDC37C93xAPM SuperIO chip */
+#define IO_IDE1_MISC 0x3f6ul /* I/O misc for SMSC FDC37C93xAPM IDE #1 */
+#define IO_SERIAL1_BASE 0x3f8ul /* I/O base for SMSC FDC37C93xAPM Serial #1 */
+
+#define IO_ISP1161_EXTENT 0x04ul /* I/O extent for Philips ISP1161x USB chip */
+#define IO_LAN91C111_EXTENT 0x10ul /* I/O extent for SMSC LAN91C111 Ethernet chip */
+#define IO_SUPERIO_EXTENT 0x02ul /* I/O extent for SMSC FDC37C93xAPM SuperIO chip */
+#define IO_IDE_EXTENT 0x08ul /* I/O extent for IDE Task Register set */
+#define IO_SERIAL_EXTENT 0x10ul
+
+#define IO_LAN91C111_PHYS 0xa7500000ul /* Physical address of SMSC LAN91C111 Ethernet chip */
+#define IO_ISP1161_PHYS 0xa7700000ul /* Physical address of Philips ISP1161x USB chip */
+#define IO_SUPERIO_PHYS 0xa7800000ul /* Physical address of SMSC FDC37C93xAPM SuperIO chip */
+
+/*
+ * map I/O ports to memory-mapped addresses
+ */
+static unsigned long microdev_isa_port2addr(unsigned long offset)
+{
+ unsigned long result;
+
+ if ((offset >= IO_LAN91C111_BASE) &&
+ (offset < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
+ /*
+ * SMSC LAN91C111 Ethernet chip
+ */
+ result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE;
+ } else if ((offset >= IO_SUPERIO_BASE) &&
+ (offset < IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) {
+ /*
+ * SMSC FDC37C93xAPM SuperIO chip
+ *
+ * Configuration Registers
+ */
+ result = IO_SUPERIO_PHYS + (offset << 1);
+#if 0
+ } else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG ||
+ offset == KBD_STATUS_REG) {
+ /*
+ * SMSC FDC37C93xAPM SuperIO chip
+ *
+ * PS/2 Keyboard + Mouse (ports 0x60 and 0x64).
+ */
+ result = IO_SUPERIO_PHYS + (offset << 1);
+#endif
+ } else if (((offset >= IO_IDE1_BASE) &&
+ (offset < IO_IDE1_BASE + IO_IDE_EXTENT)) ||
+ (offset == IO_IDE1_MISC)) {
+ /*
+ * SMSC FDC37C93xAPM SuperIO chip
+ *
+ * IDE #1
+ */
+ result = IO_SUPERIO_PHYS + (offset << 1);
+ } else if (((offset >= IO_IDE2_BASE) &&
+ (offset < IO_IDE2_BASE + IO_IDE_EXTENT)) ||
+ (offset == IO_IDE2_MISC)) {
+ /*
+ * SMSC FDC37C93xAPM SuperIO chip
+ *
+ * IDE #2
+ */
+ result = IO_SUPERIO_PHYS + (offset << 1);
+ } else if ((offset >= IO_SERIAL1_BASE) &&
+ (offset < IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) {
+ /*
+ * SMSC FDC37C93xAPM SuperIO chip
+ *
+ * Serial #1
+ */
+ result = IO_SUPERIO_PHYS + (offset << 1);
+ } else if ((offset >= IO_SERIAL2_BASE) &&
+ (offset < IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) {
+ /*
+ * SMSC FDC37C93xAPM SuperIO chip
+ *
+ * Serial #2
+ */
+ result = IO_SUPERIO_PHYS + (offset << 1);
+ } else if ((offset >= IO_ISP1161_BASE) &&
+ (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) {
+ /*
+ * Philips USB ISP1161x chip
+ */
+ result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE;
+ } else {
+ /*
+ * safe default.
+ */
+ printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
+ __func__, offset);
+ result = PVR;
+ }
+
+ return result;
+}
+
+#define PORT2ADDR(x) (microdev_isa_port2addr(x))
+
+static inline void delay(void)
+{
+#if defined(CONFIG_PCI)
+ /* System board present, just make a dummy SRAM access. (CS0 will be
+ mapped to PCI memory, probably good to avoid it.) */
+ ctrl_inw(0xa6800000);
+#else
+ /* CS0 will be mapped to flash, ROM etc so safe to access it. */
+ ctrl_inw(0xa0000000);
+#endif
+}
+
+unsigned char microdev_inb(unsigned long port)
+{
+#ifdef CONFIG_PCI
+ if (port >= PCIBIOS_MIN_IO)
+ return microdev_pci_inb(port);
+#endif
+ return *(volatile unsigned char*)PORT2ADDR(port);
+}
+
+unsigned short microdev_inw(unsigned long port)
+{
+#ifdef CONFIG_PCI
+ if (port >= PCIBIOS_MIN_IO)
+ return microdev_pci_inw(port);
+#endif
+ return *(volatile unsigned short*)PORT2ADDR(port);
+}
+
+unsigned int microdev_inl(unsigned long port)
+{
+#ifdef CONFIG_PCI
+ if (port >= PCIBIOS_MIN_IO)
+ return microdev_pci_inl(port);
+#endif
+ return *(volatile unsigned int*)PORT2ADDR(port);
+}
+
+void microdev_outw(unsigned short b, unsigned long port)
+{
+#ifdef CONFIG_PCI
+ if (port >= PCIBIOS_MIN_IO) {
+ microdev_pci_outw(b, port);
+ return;
+ }
+#endif
+ *(volatile unsigned short*)PORT2ADDR(port) = b;
+}
+
+void microdev_outb(unsigned char b, unsigned long port)
+{
+#ifdef CONFIG_PCI
+ if (port >= PCIBIOS_MIN_IO) {
+ microdev_pci_outb(b, port);
+ return;
+ }
+#endif
+
+ /*
+ * There is a board feature with the current SH4-202 MicroDev in
+ * that the 2 byte enables (nBE0 and nBE1) are tied together (and
+ * to the Chip Select Line (Ethernet_CS)). Due to this connectivity,
+ * it is not possible to safely perform 8-bit writes to the
+ * Ethernet registers, as 16-bits will be consumed from the Data
+ * lines (corrupting the other byte). Hence, this function is
+ * written to implement 16-bit read/modify/write for all byte-wide
+ * accesses.
+ *
+ * Note: there is no problem with byte READS (even or odd).
+ *
+ * Sean McGoogan - 16th June 2003.
+ */
+ if ((port >= IO_LAN91C111_BASE) &&
+ (port < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
+ /*
+ * Then are trying to perform a byte-write to the
+ * LAN91C111. This needs special care.
+ */
+ if (port % 2 == 1) { /* is the port odd ? */
+ /* unset bit-0, i.e. make even */
+ const unsigned long evenPort = port-1;
+ unsigned short word;
+
+ /*
+ * do a 16-bit read/write to write to 'port',
+ * preserving even byte.
+ *
+ * Even addresses are bits 0-7
+ * Odd addresses are bits 8-15
+ */
+ word = microdev_inw(evenPort);
+ word = (word & 0xffu) | (b << 8);
+ microdev_outw(word, evenPort);
+ } else {
+ /* else, we are trying to do an even byte write */
+ unsigned short word;
+
+ /*
+ * do a 16-bit read/write to write to 'port',
+ * preserving odd byte.
+ *
+ * Even addresses are bits 0-7
+ * Odd addresses are bits 8-15
+ */
+ word = microdev_inw(port);
+ word = (word & 0xff00u) | (b);
+ microdev_outw(word, port);
+ }
+ } else {
+ *(volatile unsigned char*)PORT2ADDR(port) = b;
+ }
+}
+
+void microdev_outl(unsigned int b, unsigned long port)
+{
+#ifdef CONFIG_PCI
+ if (port >= PCIBIOS_MIN_IO) {
+ microdev_pci_outl(b, port);
+ return;
+ }
+#endif
+ *(volatile unsigned int*)PORT2ADDR(port) = b;
+}
+
+unsigned char microdev_inb_p(unsigned long port)
+{
+ unsigned char v = microdev_inb(port);
+ delay();
+ return v;
+}
+
+unsigned short microdev_inw_p(unsigned long port)
+{
+ unsigned short v = microdev_inw(port);
+ delay();
+ return v;
+}
+
+unsigned int microdev_inl_p(unsigned long port)
+{
+ unsigned int v = microdev_inl(port);
+ delay();
+ return v;
+}
+
+void microdev_outb_p(unsigned char b, unsigned long port)
+{
+ microdev_outb(b, port);
+ delay();
+}
+
+void microdev_outw_p(unsigned short b, unsigned long port)
+{
+ microdev_outw(b, port);
+ delay();
+}
+
+void microdev_outl_p(unsigned int b, unsigned long port)
+{
+ microdev_outl(b, port);
+ delay();
+}
+
+void microdev_insb(unsigned long port, void *buffer, unsigned long count)
+{
+ volatile unsigned char *port_addr;
+ unsigned char *buf = buffer;
+
+ port_addr = (volatile unsigned char *)PORT2ADDR(port);
+
+ while (count--)
+ *buf++ = *port_addr;
+}
+
+void microdev_insw(unsigned long port, void *buffer, unsigned long count)
+{
+ volatile unsigned short *port_addr;
+ unsigned short *buf = buffer;
+
+ port_addr = (volatile unsigned short *)PORT2ADDR(port);
+
+ while (count--)
+ *buf++ = *port_addr;
+}
+
+void microdev_insl(unsigned long port, void *buffer, unsigned long count)
+{
+ volatile unsigned long *port_addr;
+ unsigned int *buf = buffer;
+
+ port_addr = (volatile unsigned long *)PORT2ADDR(port);
+
+ while (count--)
+ *buf++ = *port_addr;
+}
+
+void microdev_outsb(unsigned long port, const void *buffer, unsigned long count)
+{
+ volatile unsigned char *port_addr;
+ const unsigned char *buf = buffer;
+
+ port_addr = (volatile unsigned char *)PORT2ADDR(port);
+
+ while (count--)
+ *port_addr = *buf++;
+}
+
+void microdev_outsw(unsigned long port, const void *buffer, unsigned long count)
+{
+ volatile unsigned short *port_addr;
+ const unsigned short *buf = buffer;
+
+ port_addr = (volatile unsigned short *)PORT2ADDR(port);
+
+ while (count--)
+ *port_addr = *buf++;
+}
+
+void microdev_outsl(unsigned long port, const void *buffer, unsigned long count)
+{
+ volatile unsigned long *port_addr;
+ const unsigned int *buf = buffer;
+
+ port_addr = (volatile unsigned long *)PORT2ADDR(port);
+
+ while (count--)
+ *port_addr = *buf++;
+}
OpenPOWER on IntegriCloud