diff options
Diffstat (limited to 'arch/ppc/boot/simple')
35 files changed, 0 insertions, 7388 deletions
diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile deleted file mode 100644 index 5b877792d14f..000000000000 --- a/arch/ppc/boot/simple/Makefile +++ /dev/null @@ -1,277 +0,0 @@ -# This is far from simple, but I couldn't think of a good name. This is -# for making the 'zImage' or 'zImage.initrd' on a number of targets. -# -# Author: Tom Rini <trini@mvista.com> -# -# Notes: -# (1) For machines that do not want to use the ELF image directly (including -# stripping just the ELF header off), they must set the variables -# zimage-$(CONFIG_MACHINE) and zimagerd-$(CONFIG_MACHINE) to the target -# that produces the desired image and they must set end-$(CONFIG_MACHINE) -# to what will be suffixed to the image filename. -# (2) Regardless of (1), to have the resulting image be something other -# than 'zImage.elf', set end-$(CONFIG_MACHINE) to be the suffix used for -# the zImage, znetboot, and znetbootrd targets. -# (3) For machine targets which use the mktree program, you can optionally -# set entrypoint-$(CONFIG_MACHINE) to the location which the image should be -# loaded at. The optimal setting for entrypoint-$(CONFIG_MACHINE) is the link -# address. -# (4) It is advisable to pass in the memory size using BI_MEMSIZE and -# get_mem_size(), which is memory controller dependent. Add in the correct -# XXX_memory.o file for this to work, as well as editing the -# misc-$(CONFIG_MACHINE) variable. - -boot := arch/ppc/boot -common := $(boot)/common -utils := $(boot)/utils -bootlib := $(boot)/lib -images := $(boot)/images -of1275 := $(boot)/of1275 -tftpboot := /tftpboot - -# Normally, we use the 'misc.c' file for decompress_kernel and -# whatnot. Sometimes we need to override this however. -misc-y := misc.o - -# Normally, we have our images end in .elf, but something we want to -# change this. -end-y := elf - -# Additionally, we normally don't need to mess with the L2 / L3 caches -# if present on 'classic' PPC. -cacheflag-y := -DCLEAR_CACHES="" -# This file will flush / disable the L2, and L3 if present. -clear_L2_L3 := $(srctree)/$(boot)/simple/clear.S - -# -# See arch/ppc/kconfig and arch/ppc/platforms/Kconfig -# for definition of what platform each config option refer to. -#---------------------------------------------------------------------------- - zimage-$(CONFIG_CPCI690) := zImage-STRIPELF -zimageinitrd-$(CONFIG_CPCI690) := zImage.initrd-STRIPELF - extra.o-$(CONFIG_CPCI690) := misc-cpci690.o - end-$(CONFIG_CPCI690) := cpci690 - cacheflag-$(CONFIG_CPCI690) := -include $(clear_L2_L3) - - zimage-$(CONFIG_IBM_OPENBIOS) := zImage-TREE -zimageinitrd-$(CONFIG_IBM_OPENBIOS) := zImage.initrd-TREE - end-$(CONFIG_IBM_OPENBIOS) := treeboot - misc-$(CONFIG_IBM_OPENBIOS) := misc-embedded.o - - end-$(CONFIG_EMBEDDEDBOOT) := embedded - misc-$(CONFIG_EMBEDDEDBOOT) := misc-embedded.o - - zimage-$(CONFIG_BAMBOO) := zImage-TREE -zimageinitrd-$(CONFIG_BAMBOO) := zImage.initrd-TREE - end-$(CONFIG_BAMBOO) := bamboo - entrypoint-$(CONFIG_BAMBOO) := 0x01000000 - extra.o-$(CONFIG_BAMBOO) := pibs.o - - zimage-$(CONFIG_BUBINGA) := zImage-TREE -zimageinitrd-$(CONFIG_BUBINGA) := zImage.initrd-TREE - end-$(CONFIG_BUBINGA) := bubinga - entrypoint-$(CONFIG_BUBINGA) := 0x01000000 - extra.o-$(CONFIG_BUBINGA) := openbios.o - - zimage-$(CONFIG_EBONY) := zImage-TREE -zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE - end-$(CONFIG_EBONY) := ebony - entrypoint-$(CONFIG_EBONY) := 0x01000000 - extra.o-$(CONFIG_EBONY) := openbios.o - - zimage-$(CONFIG_LUAN) := zImage-TREE -zimageinitrd-$(CONFIG_LUAN) := zImage.initrd-TREE - end-$(CONFIG_LUAN) := luan - entrypoint-$(CONFIG_LUAN) := 0x01000000 - extra.o-$(CONFIG_LUAN) := pibs.o - - zimage-$(CONFIG_YUCCA) := zImage-TREE -zimageinitrd-$(CONFIG_YUCCA) := zImage.initrd-TREE - end-$(CONFIG_YUCCA) := yucca - entrypoint-$(CONFIG_YUCCA) := 0x01000000 - extra.o-$(CONFIG_YUCCA) := pibs.o - - zimage-$(CONFIG_OCOTEA) := zImage-TREE -zimageinitrd-$(CONFIG_OCOTEA) := zImage.initrd-TREE - end-$(CONFIG_OCOTEA) := ocotea - entrypoint-$(CONFIG_OCOTEA) := 0x01000000 - extra.o-$(CONFIG_OCOTEA) := pibs.o - - zimage-$(CONFIG_SYCAMORE) := zImage-TREE -zimageinitrd-$(CONFIG_SYCAMORE) := zImage.initrd-TREE - end-$(CONFIG_SYCAMORE) := sycamore - entrypoint-$(CONFIG_SYCAMORE) := 0x01000000 - extra.o-$(CONFIG_SYCAMORE) := openbios.o - - zimage-$(CONFIG_WALNUT) := zImage-TREE -zimageinitrd-$(CONFIG_WALNUT) := zImage.initrd-TREE - end-$(CONFIG_WALNUT) := walnut - entrypoint-$(CONFIG_WALNUT) := 0x01000000 - extra.o-$(CONFIG_WALNUT) := openbios.o - - extra.o-$(CONFIG_EV64260) := misc-ev64260.o - end-$(CONFIG_EV64260) := ev64260 - cacheflag-$(CONFIG_EV64260) := -include $(clear_L2_L3) - - extra.o-$(CONFIG_CHESTNUT) := misc-chestnut.o - end-$(CONFIG_CHESTNUT) := chestnut - - extra.o-$(CONFIG_KATANA) := misc-katana.o - end-$(CONFIG_KATANA) := katana - cacheflag-$(CONFIG_KATANA) := -include $(clear_L2_L3) - - extra.o-$(CONFIG_RADSTONE_PPC7D) := misc-radstone_ppc7d.o - end-$(CONFIG_RADSTONE_PPC7D) := radstone_ppc7d - cacheflag-$(CONFIG_RADSTONE_PPC7D) := -include $(clear_L2_L3) - - extra.o-$(CONFIG_EV64360) := misc-ev64360.o - end-$(CONFIG_EV64360) := ev64360 - cacheflag-$(CONFIG_EV64360) := -include $(clear_L2_L3) - -# kconfig 'feature', only one of these will ever be 'y' at a time. -# The rest will be unset. -motorola := $(CONFIG_MVME5100)$(CONFIG_PRPMC750) \ -$(CONFIG_PRPMC800)$(CONFIG_LOPEC)$(CONFIG_PPLUS) -motorola := $(strip $(motorola)) - - zimage-$(motorola) := zImage-PPLUS -zimageinitrd-$(motorola) := zImage.initrd-PPLUS - end-$(motorola) := pplus - -# Overrides previous assingment - extra.o-$(CONFIG_PPLUS) := prepmap.o - extra.o-$(CONFIG_LOPEC) := mpc10x_memory.o - -# Really only valid if CONFIG_6xx=y - zimage-$(CONFIG_PPC_PREP) := zImage-PPLUS -zimageinitrd-$(CONFIG_PPC_PREP) := zImage.initrd-PPLUS -ifeq ($(CONFIG_6xx),y) - extra.o-$(CONFIG_PPC_PREP) := prepmap.o - misc-$(CONFIG_PPC_PREP) += misc-prep.o mpc10x_memory.o -endif - end-$(CONFIG_PPC_PREP) := prep - - end-$(CONFIG_SANDPOINT) := sandpoint - cacheflag-$(CONFIG_SANDPOINT) := -include $(clear_L2_L3) - - zimage-$(CONFIG_SPRUCE) := zImage-TREE -zimageinitrd-$(CONFIG_SPRUCE) := zImage.initrd-TREE - end-$(CONFIG_SPRUCE) := spruce - entrypoint-$(CONFIG_SPRUCE) := 0x00800000 - misc-$(CONFIG_SPRUCE) += misc-spruce.o - - zimage-$(CONFIG_LITE5200) := zImage-STRIPELF -zimageinitrd-$(CONFIG_LITE5200) := zImage.initrd-STRIPELF - end-$(CONFIG_LITE5200) := lite5200 - cacheflag-$(CONFIG_LITE5200) := -include $(clear_L2_L3) - - -# SMP images should have a '.smp' suffix. - end-$(CONFIG_SMP) := $(end-y).smp - -# This is a treeboot that needs init functions until the -# boot rom is sorted out (i.e. this is short lived) -EXTRA_AFLAGS := $(extra-aflags-y) -# head.o needs to get the cacheflags defined. -AFLAGS_head.o += $(cacheflag-y) - -# Linker args. This specifies where the image will be run at. -LD_ARGS := -T $(srctree)/$(boot)/ld.script \ - -Ttext $(CONFIG_BOOT_LOAD) -Bstatic -OBJCOPY_ARGS := -O elf32-powerpc - -# head.o and relocate.o must be at the start. -boot-y := head.o relocate.o $(extra.o-y) $(misc-y) -boot-$(CONFIG_REDWOOD_5) += embed_config.o -boot-$(CONFIG_REDWOOD_6) += embed_config.o -boot-$(CONFIG_8xx) += embed_config.o -boot-$(CONFIG_8260) += embed_config.o -boot-$(CONFIG_EP405) += embed_config.o -boot-$(CONFIG_XILINX_ML300) += embed_config.o -boot-$(CONFIG_XILINX_ML403) += embed_config.o -boot-$(CONFIG_BSEIP) += iic.o -boot-$(CONFIG_MBX) += iic.o pci.o qspan_pci.o -boot-$(CONFIG_MV64X60) += misc-mv64x60.o -boot-$(CONFIG_RPXCLASSIC) += iic.o pci.o qspan_pci.o -boot-$(CONFIG_RPXLITE) += iic.o -# Different boards need different serial implementations. -ifeq ($(CONFIG_SERIAL_CPM_CONSOLE),y) -boot-$(CONFIG_8xx) += m8xx_tty.o -boot-$(CONFIG_8260) += m8260_tty.o -endif -boot-$(CONFIG_SERIAL_MPC52xx_CONSOLE) += mpc52xx_tty.o -boot-$(CONFIG_SERIAL_MPSC_CONSOLE) += mv64x60_tty.o -boot-$(CONFIG_SERIAL_UARTLITE_CONSOLE) += uartlite_tty.o - -LIBS := $(common)/lib.a $(bootlib)/lib.a -ifeq ($(CONFIG_PPC_PREP),y) -LIBS += $(of1275)/lib.a -endif - -OBJS := $(addprefix $(obj)/,$(boot-y)) - -# Tools -MKBUGBOOT := $(utils)/mkbugboot -MKPREP := $(utils)/mkprep -MKTREE := $(utils)/mktree - -targets := dummy.o - -$(obj)/zvmlinux: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \ - $(images)/vmlinux.gz $(obj)/dummy.o - $(OBJCOPY) $(OBJCOPY_ARGS) \ - --add-section=.image=$(images)/vmlinux.gz \ - --set-section-flags=.image=contents,alloc,load,readonly,data \ - $(obj)/dummy.o $(obj)/image.o - $(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS) - $(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \ - -R .stabstr -R .ramdisk - -$(obj)/zvmlinux.initrd: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \ - $(images)/vmlinux.gz $(obj)/dummy.o - $(OBJCOPY) $(OBJCOPY_ARGS) \ - --add-section=.ramdisk=$(images)/ramdisk.image.gz \ - --set-section-flags=.ramdisk=contents,alloc,load,readonly,data \ - --add-section=.image=$(images)/vmlinux.gz \ - --set-section-flags=.image=contents,alloc,load,readonly,data \ - $(obj)/dummy.o $(obj)/image.o - $(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS) - $(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \ - -R .stabstr - -# Sort-of dummy rules, that let us format the image we want. -zImage: $(images)/$(zimage-y) $(obj)/zvmlinux - cp -f $(obj)/zvmlinux $(images)/zImage.elf - rm -f $(obj)/zvmlinux - -zImage.initrd: $(images)/$(zimageinitrd-y) $(obj)/zvmlinux.initrd - cp -f $(obj)/zvmlinux.initrd $(images)/zImage.initrd.elf - rm -f $(obj)/zvmlinux.initrd - -znetboot: zImage - cp $(images)/zImage.$(end-y) $(tftpboot)/zImage.$(end-y) - -znetboot.initrd: zImage.initrd - cp $(images)/zImage.initrd.$(end-y) $(tftpboot)/zImage.initrd.$(end-y) - -$(images)/zImage-STRIPELF: $(obj)/zvmlinux - dd if=$(obj)/zvmlinux of=$(images)/zImage.$(end-y) skip=64 bs=1k - -$(images)/zImage.initrd-STRIPELF: $(obj)/zvmlinux.initrd - dd if=$(obj)/zvmlinux.initrd of=$(images)/zImage.initrd.$(end-y) \ - skip=64 bs=1k - -$(images)/zImage-TREE: $(obj)/zvmlinux $(MKTREE) - $(MKTREE) $(obj)/zvmlinux $(images)/zImage.$(end-y) $(entrypoint-y) - -$(images)/zImage.initrd-TREE: $(obj)/zvmlinux.initrd $(MKTREE) - $(MKTREE) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y) \ - $(entrypoint-y) - -$(images)/zImage-PPLUS: $(obj)/zvmlinux $(MKPREP) $(MKBUGBOOT) - $(MKPREP) -pbp $(obj)/zvmlinux $(images)/zImage.$(end-y) - $(MKBUGBOOT) $(obj)/zvmlinux $(images)/zImage.bugboot - -$(images)/zImage.initrd-PPLUS: $(obj)/zvmlinux.initrd $(MKPREP) $(MKBUGBOOT) - $(MKPREP) -pbp $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y) - $(MKBUGBOOT) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.bugboot diff --git a/arch/ppc/boot/simple/chrpmap.c b/arch/ppc/boot/simple/chrpmap.c deleted file mode 100644 index 14d9e05d98bb..000000000000 --- a/arch/ppc/boot/simple/chrpmap.c +++ /dev/null @@ -1,12 +0,0 @@ -/* - * 2004 (C) IBM. This file is licensed under the terms of the GNU General - * Public License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <nonstdio.h> - -void board_isa_init(void) -{ - ISA_init(0xFE000000); -} diff --git a/arch/ppc/boot/simple/clear.S b/arch/ppc/boot/simple/clear.S deleted file mode 100644 index 95c5647a0f51..000000000000 --- a/arch/ppc/boot/simple/clear.S +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Code to call _setup_L2CR to flus, invalidate and disable the L2, - * and if present, do the same to the L3. - */ - -#define CLEAR_CACHES \ - bl _setup_L2CR; \ - \ - /* If 745x, turn off L3CR as well */ \ - mfspr r8,SPRN_PVR; \ - srwi r8,r8,16; \ - \ - cmpli cr0,r8,0x8000; /* 7450 */ \ - cmpli cr1,r8,0x8001; /* 7455 */ \ - cmpli cr2,r8,0x8002; /* 7457 */ \ - /* Now test if any are true. */ \ - cror 4*cr0+eq,4*cr0+eq,4*cr1+eq; \ - cror 4*cr0+eq,4*cr0+eq,4*cr2+eq; \ - beql _setup_L3CR diff --git a/arch/ppc/boot/simple/cpc700_memory.c b/arch/ppc/boot/simple/cpc700_memory.c deleted file mode 100644 index d75420a45a59..000000000000 --- a/arch/ppc/boot/simple/cpc700_memory.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Find memory based upon settings in the CPC700 bridge - * - * Author: Dan Cox - * - * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <asm/types.h> -#include <asm/io.h> -#include "cpc700.h" - -unsigned long -cpc700_get_mem_size(void) -{ - int i; - unsigned long len, amt; - - /* Start at MB1EA, since MB0EA will most likely be the ending address - for ROM space. */ - for(len = 0, i = CPC700_MB1EA; i <= CPC700_MB4EA; i+=4) { - amt = cpc700_read_memreg(i); - if (amt == 0) - break; - len = amt; - } - - return len; -} - - diff --git a/arch/ppc/boot/simple/dummy.c b/arch/ppc/boot/simple/dummy.c deleted file mode 100644 index 31dbf45bf99c..000000000000 --- a/arch/ppc/boot/simple/dummy.c +++ /dev/null @@ -1,4 +0,0 @@ -int main(void) -{ - return 0; -} diff --git a/arch/ppc/boot/simple/embed_config.c b/arch/ppc/boot/simple/embed_config.c deleted file mode 100644 index 3b46792d7b8b..000000000000 --- a/arch/ppc/boot/simple/embed_config.c +++ /dev/null @@ -1,938 +0,0 @@ -/* Board specific functions for those embedded 8xx boards that do - * not have boot monitor support for board information. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <asm/reg.h> -#ifdef CONFIG_8xx -#include <asm/mpc8xx.h> -#endif -#ifdef CONFIG_8260 -#include <asm/mpc8260.h> -#include <asm/immap_cpm2.h> -#endif -#ifdef CONFIG_40x -#include <asm/io.h> -#endif -#ifdef CONFIG_XILINX_VIRTEX -#include <platforms/4xx/xparameters/xparameters.h> -#endif -extern unsigned long timebase_period_ns; - -/* For those boards that don't provide one. -*/ -#if !defined(CONFIG_MBX) -static bd_t bdinfo; -#endif - -/* IIC functions. - * These are just the basic master read/write operations so we can - * examine serial EEPROM. - */ -extern void iic_read(uint devaddr, u_char *buf, uint offset, uint count); - -/* Supply a default Ethernet address for those eval boards that don't - * ship with one. This is an address from the MBX board I have, so - * it is unlikely you will find it on your network. - */ -static ushort def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 }; - -#if defined(CONFIG_MBX) - -/* The MBX hands us a pretty much ready to go board descriptor. This - * is where the idea started in the first place. - */ -void -embed_config(bd_t **bdp) -{ - u_char *mp; - u_char eebuf[128]; - int i = 8; - bd_t *bd; - - bd = *bdp; - - /* Read the first 128 bytes of the EEPROM. There is more, - * but this is all we need. - */ - iic_read(0xa4, eebuf, 0, 128); - - /* All we are looking for is the Ethernet MAC address. The - * first 8 bytes are 'MOTOROLA', so check for part of that. - * Next, the VPD describes a MAC 'packet' as being of type 08 - * and size 06. So we look for that and the MAC must follow. - * If there are more than one, we still only care about the first. - * If it's there, assume we have a valid MAC address. If not, - * grab our default one. - */ - if ((*(uint *)eebuf) == 0x4d4f544f) { - while (i < 127 && !(eebuf[i] == 0x08 && eebuf[i + 1] == 0x06)) - i += eebuf[i + 1] + 2; /* skip this packet */ - - if (i == 127) /* Couldn't find. */ - mp = (u_char *)def_enet_addr; - else - mp = &eebuf[i + 2]; - } - else - mp = (u_char *)def_enet_addr; - - for (i=0; i<6; i++) - bd->bi_enetaddr[i] = *mp++; - - /* The boot rom passes these to us in MHz. Linux now expects - * them to be in Hz. - */ - bd->bi_intfreq *= 1000000; - bd->bi_busfreq *= 1000000; - - /* Stuff a baud rate here as well. - */ - bd->bi_baudrate = 9600; -} -#endif /* CONFIG_MBX */ - -#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) || \ - defined(CONFIG_RPX8260) || defined(CONFIG_EP405) -/* Helper functions for Embedded Planet boards. -*/ -/* Because I didn't find anything that would do this....... -*/ -u_char -aschex_to_byte(u_char *cp) -{ - u_char byte, c; - - c = *cp++; - - if ((c >= 'A') && (c <= 'F')) { - c -= 'A'; - c += 10; - } else if ((c >= 'a') && (c <= 'f')) { - c -= 'a'; - c += 10; - } else - c -= '0'; - - byte = c * 16; - - c = *cp; - - if ((c >= 'A') && (c <= 'F')) { - c -= 'A'; - c += 10; - } else if ((c >= 'a') && (c <= 'f')) { - c -= 'a'; - c += 10; - } else - c -= '0'; - - byte += c; - - return(byte); -} - -static void -rpx_eth(bd_t *bd, u_char *cp) -{ - int i; - - for (i=0; i<6; i++) { - bd->bi_enetaddr[i] = aschex_to_byte(cp); - cp += 2; - } -} - -#ifdef CONFIG_RPX8260 -static uint -rpx_baseten(u_char *cp) -{ - uint retval; - - retval = 0; - - while (*cp != '\n') { - retval *= 10; - retval += (*cp) - '0'; - cp++; - } - return(retval); -} -#endif - -#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) -static void -rpx_brate(bd_t *bd, u_char *cp) -{ - uint rate; - - rate = 0; - - while (*cp != '\n') { - rate *= 10; - rate += (*cp) - '0'; - cp++; - } - - bd->bi_baudrate = rate * 100; -} - -static void -rpx_cpuspeed(bd_t *bd, u_char *cp) -{ - uint num, den; - - num = den = 0; - - while (*cp != '\n') { - num *= 10; - num += (*cp) - '0'; - cp++; - if (*cp == '/') { - cp++; - den = (*cp) - '0'; - break; - } - } - - /* I don't know why the RPX just can't state the actual - * CPU speed..... - */ - if (den) { - num /= den; - num *= den; - } - bd->bi_intfreq = bd->bi_busfreq = num * 1000000; - - /* The 8xx can only run a maximum 50 MHz bus speed (until - * Motorola changes this :-). Greater than 50 MHz parts - * run internal/2 for bus speed. - */ - if (num > 50) - bd->bi_busfreq /= 2; -} -#endif - -#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) || defined(CONFIG_EP405) -static void -rpx_memsize(bd_t *bd, u_char *cp) -{ - uint size; - - size = 0; - - while (*cp != '\n') { - size *= 10; - size += (*cp) - '0'; - cp++; - } - - bd->bi_memsize = size * 1024 * 1024; -} -#endif /* LITE || CLASSIC || EP405 */ -#if defined(CONFIG_EP405) -static void -rpx_nvramsize(bd_t *bd, u_char *cp) -{ - uint size; - - size = 0; - - while (*cp != '\n') { - size *= 10; - size += (*cp) - '0'; - cp++; - } - - bd->bi_nvramsize = size * 1024; -} -#endif /* CONFIG_EP405 */ - -#endif /* Embedded Planet boards */ - -#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) - -/* Read the EEPROM on the RPX-Lite board. -*/ -void -embed_config(bd_t **bdp) -{ - u_char eebuf[256], *cp; - bd_t *bd; - - /* Read the first 256 bytes of the EEPROM. I think this - * is really all there is, and I hope if it gets bigger the - * info we want is still up front. - */ - bd = &bdinfo; - *bdp = bd; - -#if 1 - iic_read(0xa8, eebuf, 0, 128); - iic_read(0xa8, &eebuf[128], 128, 128); - - /* We look for two things, the Ethernet address and the - * serial baud rate. The records are separated by - * newlines. - */ - cp = eebuf; - for (;;) { - if (*cp == 'E') { - cp++; - if (*cp == 'A') { - cp += 2; - rpx_eth(bd, cp); - } - } - if (*cp == 'S') { - cp++; - if (*cp == 'B') { - cp += 2; - rpx_brate(bd, cp); - } - } - if (*cp == 'D') { - cp++; - if (*cp == '1') { - cp += 2; - rpx_memsize(bd, cp); - } - } - if (*cp == 'H') { - cp++; - if (*cp == 'Z') { - cp += 2; - rpx_cpuspeed(bd, cp); - } - } - - /* Scan to the end of the record. - */ - while ((*cp != '\n') && (*cp != 0xff)) - cp++; - - /* If the next character is a 0 or ff, we are done. - */ - cp++; - if ((*cp == 0) || (*cp == 0xff)) - break; - } - bd->bi_memstart = 0; -#else - /* For boards without initialized EEPROM. - */ - bd->bi_memstart = 0; - bd->bi_memsize = (8 * 1024 * 1024); - bd->bi_intfreq = 48000000; - bd->bi_busfreq = 48000000; - bd->bi_baudrate = 9600; -#endif -} -#endif /* RPXLITE || RPXCLASSIC */ - -#ifdef CONFIG_BSEIP -/* Build a board information structure for the BSE ip-Engine. - * There is more to come since we will add some environment - * variables and a function to read them. - */ -void -embed_config(bd_t **bdp) -{ - u_char *cp; - int i; - bd_t *bd; - - bd = &bdinfo; - *bdp = bd; - - /* Baud rate and processor speed will eventually come - * from the environment variables. - */ - bd->bi_baudrate = 9600; - - /* Get the Ethernet station address from the Flash ROM. - */ - cp = (u_char *)0xfe003ffa; - for (i=0; i<6; i++) { - bd->bi_enetaddr[i] = *cp++; - } - - /* The rest of this should come from the environment as well. - */ - bd->bi_memstart = 0; - bd->bi_memsize = (16 * 1024 * 1024); - bd->bi_intfreq = 48000000; - bd->bi_busfreq = 48000000; -} -#endif /* BSEIP */ - -#ifdef CONFIG_FADS -/* Build a board information structure for the FADS. - */ -void -embed_config(bd_t **bdp) -{ - u_char *cp; - int i; - bd_t *bd; - - bd = &bdinfo; - *bdp = bd; - - /* Just fill in some known values. - */ - bd->bi_baudrate = 9600; - - /* Use default enet. - */ - cp = (u_char *)def_enet_addr; - for (i=0; i<6; i++) { - bd->bi_enetaddr[i] = *cp++; - } - - bd->bi_memstart = 0; - bd->bi_memsize = (8 * 1024 * 1024); - bd->bi_intfreq = 40000000; - bd->bi_busfreq = 40000000; -} -#endif /* FADS */ - -#ifdef CONFIG_8260 -/* Compute 8260 clock values if the rom doesn't provide them. - */ -static unsigned char bus2core_8260[] = { -/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */ - 3, 2, 2, 2, 4, 4, 5, 9, 6, 11, 8, 10, 3, 12, 7, 2, - 6, 5, 13, 2, 14, 4, 15, 2, 3, 11, 8, 10, 16, 12, 7, 2, -}; - -static void -clk_8260(bd_t *bd) -{ - uint scmr, vco_out, clkin; - uint plldf, pllmf, corecnf; - volatile cpm2_map_t *ip; - - ip = (cpm2_map_t *)CPM_MAP_ADDR; - scmr = ip->im_clkrst.car_scmr; - - /* The clkin is always bus frequency. - */ - clkin = bd->bi_busfreq; - - /* Collect the bits from the scmr. - */ - plldf = (scmr >> 12) & 1; - pllmf = scmr & 0xfff; - corecnf = (scmr >> 24) &0x1f; - - /* This is arithmetic from the 8260 manual. - */ - vco_out = clkin / (plldf + 1); - vco_out *= 2 * (pllmf + 1); - bd->bi_vco = vco_out; /* Save for later */ - - bd->bi_cpmfreq = vco_out / 2; /* CPM Freq, in MHz */ - bd->bi_intfreq = bd->bi_busfreq * bus2core_8260[corecnf] / 2; - - /* Set Baud rate divisor. The power up default is divide by 16, - * but we set it again here in case it was changed. - */ - ip->im_clkrst.car_sccr = 1; /* DIV 16 BRG */ - bd->bi_brgfreq = vco_out / 16; -} - -static unsigned char bus2core_8280[] = { -/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */ - 3, 2, 2, 2, 4, 4, 5, 9, 6, 11, 8, 10, 3, 12, 7, 2, - 6, 5, 13, 2, 14, 2, 15, 2, 3, 2, 2, 2, 16, 2, 2, 2, -}; - -static void -clk_8280(bd_t *bd) -{ - uint scmr, main_clk, clkin; - uint pllmf, corecnf; - volatile cpm2_map_t *ip; - - ip = (cpm2_map_t *)CPM_MAP_ADDR; - scmr = ip->im_clkrst.car_scmr; - - /* The clkin is always bus frequency. - */ - clkin = bd->bi_busfreq; - - /* Collect the bits from the scmr. - */ - pllmf = scmr & 0xf; - corecnf = (scmr >> 24) & 0x1f; - - /* This is arithmetic from the 8280 manual. - */ - main_clk = clkin * (pllmf + 1); - - bd->bi_cpmfreq = main_clk / 2; /* CPM Freq, in MHz */ - bd->bi_intfreq = bd->bi_busfreq * bus2core_8280[corecnf] / 2; - - /* Set Baud rate divisor. The power up default is divide by 16, - * but we set it again here in case it was changed. - */ - ip->im_clkrst.car_sccr = (ip->im_clkrst.car_sccr & 0x3) | 0x1; - bd->bi_brgfreq = main_clk / 16; -} -#endif - -#ifdef CONFIG_SBC82xx -void -embed_config(bd_t **bdp) -{ - u_char *cp; - int i; - bd_t *bd; - unsigned long pvr; - - bd = *bdp; - - bd = &bdinfo; - *bdp = bd; - bd->bi_baudrate = 9600; - bd->bi_memsize = 256 * 1024 * 1024; /* just a guess */ - - cp = (void*)SBC82xx_MACADDR_NVRAM_SCC1; - memcpy(bd->bi_enetaddr, cp, 6); - - /* can busfreq be calculated? */ - pvr = mfspr(SPRN_PVR); - if ((pvr & 0xffff0000) == 0x80820000) { - bd->bi_busfreq = 100000000; - clk_8280(bd); - } else { - bd->bi_busfreq = 66000000; - clk_8260(bd); - } - -} -#endif /* SBC82xx */ - -#if defined(CONFIG_EST8260) || defined(CONFIG_TQM8260) -void -embed_config(bd_t **bdp) -{ - u_char *cp; - int i; - bd_t *bd; - - bd = *bdp; -#if 0 - /* This is actually provided by my boot rom. I have it - * here for those people that may load the kernel with - * a JTAG/COP tool and not the rom monitor. - */ - bd->bi_baudrate = 115200; - bd->bi_intfreq = 200000000; - bd->bi_busfreq = 66666666; - bd->bi_cpmfreq = 66666666; - bd->bi_brgfreq = 33333333; - bd->bi_memsize = 16 * 1024 * 1024; -#else - /* The boot rom passes these to us in MHz. Linux now expects - * them to be in Hz. - */ - bd->bi_intfreq *= 1000000; - bd->bi_busfreq *= 1000000; - bd->bi_cpmfreq *= 1000000; - bd->bi_brgfreq *= 1000000; -#endif - - cp = (u_char *)def_enet_addr; - for (i=0; i<6; i++) { - bd->bi_enetaddr[i] = *cp++; - } -} -#endif /* EST8260 */ - -#ifdef CONFIG_SBS8260 -void -embed_config(bd_t **bdp) -{ - u_char *cp; - int i; - bd_t *bd; - - /* This should provided by the boot rom. - */ - bd = &bdinfo; - *bdp = bd; - bd->bi_baudrate = 9600; - bd->bi_memsize = 64 * 1024 * 1024; - - /* Set all of the clocks. We have to know the speed of the - * external clock. The development board had 66 MHz. - */ - bd->bi_busfreq = 66666666; - clk_8260(bd); - - /* I don't know how to compute this yet. - */ - bd->bi_intfreq = 133000000; - - - cp = (u_char *)def_enet_addr; - for (i=0; i<6; i++) { - bd->bi_enetaddr[i] = *cp++; - } -} -#endif /* SBS8260 */ - -#ifdef CONFIG_RPX8260 -void -embed_config(bd_t **bdp) -{ - u_char *cp, *keyvals; - int i; - bd_t *bd; - - keyvals = (u_char *)*bdp; - - bd = &bdinfo; - *bdp = bd; - - /* This is almost identical to the RPX-Lite/Classic functions - * on the 8xx boards. It would be nice to have a key lookup - * function in a string, but the format of all of the fields - * is slightly different. - */ - cp = keyvals; - for (;;) { - if (*cp == 'E') { - cp++; - if (*cp == 'A') { - cp += 2; - rpx_eth(bd, cp); - } - } - if (*cp == 'S') { - cp++; - if (*cp == 'B') { - cp += 2; - bd->bi_baudrate = rpx_baseten(cp); - } - } - if (*cp == 'D') { - cp++; - if (*cp == '1') { - cp += 2; - bd->bi_memsize = rpx_baseten(cp) * 1024 * 1024; - } - } - if (*cp == 'X') { - cp++; - if (*cp == 'T') { - cp += 2; - bd->bi_busfreq = rpx_baseten(cp); - } - } - if (*cp == 'N') { - cp++; - if (*cp == 'V') { - cp += 2; - bd->bi_nvsize = rpx_baseten(cp) * 1024 * 1024; - } - } - - /* Scan to the end of the record. - */ - while ((*cp != '\n') && (*cp != 0xff)) - cp++; - - /* If the next character is a 0 or ff, we are done. - */ - cp++; - if ((*cp == 0) || (*cp == 0xff)) - break; - } - bd->bi_memstart = 0; - - /* The memory size includes both the 60x and local bus DRAM. - * I don't want to use the local bus DRAM for real memory, - * so subtract it out. It would be nice if they were separate - * keys. - */ - bd->bi_memsize -= 32 * 1024 * 1024; - - /* Set all of the clocks. We have to know the speed of the - * external clock. - */ - clk_8260(bd); - - /* I don't know how to compute this yet. - */ - bd->bi_intfreq = 200000000; -} -#endif /* RPX6 for testing */ - -#ifdef CONFIG_ADS8260 -void -embed_config(bd_t **bdp) -{ - u_char *cp; - int i; - bd_t *bd; - - /* This should provided by the boot rom. - */ - bd = &bdinfo; - *bdp = bd; - bd->bi_baudrate = 9600; - bd->bi_memsize = 16 * 1024 * 1024; - - /* Set all of the clocks. We have to know the speed of the - * external clock. The development board had 66 MHz. - */ - bd->bi_busfreq = 66666666; - clk_8260(bd); - - /* I don't know how to compute this yet. - */ - bd->bi_intfreq = 200000000; - - - cp = (u_char *)def_enet_addr; - for (i=0; i<6; i++) { - bd->bi_enetaddr[i] = *cp++; - } -} -#endif /* ADS8260 */ - -#ifdef CONFIG_WILLOW -void -embed_config(bd_t **bdp) -{ - u_char *cp; - int i; - bd_t *bd; - - /* Willow has Open Firmware....I should learn how to get this - * information from it. - */ - bd = &bdinfo; - *bdp = bd; - bd->bi_baudrate = 9600; - bd->bi_memsize = 32 * 1024 * 1024; - - /* Set all of the clocks. We have to know the speed of the - * external clock. The development board had 66 MHz. - */ - bd->bi_busfreq = 66666666; - clk_8260(bd); - - /* I don't know how to compute this yet. - */ - bd->bi_intfreq = 200000000; - - - cp = (u_char *)def_enet_addr; - for (i=0; i<6; i++) { - bd->bi_enetaddr[i] = *cp++; - } -} -#endif /* WILLOW */ - -#if defined(CONFIG_XILINX_ML300) || defined(CONFIG_XILINX_ML403) -void -embed_config(bd_t ** bdp) -{ - static const unsigned long line_size = 32; - static const unsigned long congruence_classes = 256; - unsigned long addr; - unsigned long dccr; - uint8_t* cp; - bd_t *bd; - int i; - - /* - * Invalidate the data cache if the data cache is turned off. - * - The 405 core does not invalidate the data cache on power-up - * or reset but does turn off the data cache. We cannot assume - * that the cache contents are valid. - * - If the data cache is turned on this must have been done by - * a bootloader and we assume that the cache contents are - * valid. - */ - __asm__("mfdccr %0": "=r" (dccr)); - if (dccr == 0) { - for (addr = 0; - addr < (congruence_classes * line_size); - addr += line_size) { - __asm__("dccci 0,%0": :"b"(addr)); - } - } - - bd = &bdinfo; - *bdp = bd; - bd->bi_memsize = XPAR_DDR_0_SIZE; - bd->bi_intfreq = XPAR_CORE_CLOCK_FREQ_HZ; - bd->bi_busfreq = XPAR_PLB_CLOCK_FREQ_HZ; - bd->bi_pci_busfreq = XPAR_PCI_0_CLOCK_FREQ_HZ; - - /* Copy the default ethernet address */ - cp = (u_char *)def_enet_addr; - for (i=0; i<6; i++) - bd->bi_enetaddr[i] = *cp++; - - timebase_period_ns = 1000000000 / bd->bi_tbfreq; - /* see bi_tbfreq definition in arch/ppc/platforms/4xx/xilinx_ml300.h */ -} -#endif /* CONFIG_XILINX_ML300 || CONFIG_XILINX_ML403 */ - -#ifdef CONFIG_IBM_OPENBIOS -/* This could possibly work for all treeboot roms. -*/ -#if defined(CONFIG_BUBINGA) -#define BOARD_INFO_VECTOR 0xFFF80B50 /* openbios 1.19 moved this vector down - armin */ -#else -#define BOARD_INFO_VECTOR 0xFFFE0B50 -#endif - -void -embed_config(bd_t **bdp) -{ - u_char *cp; - int i; - bd_t *bd, *treeboot_bd; - bd_t *(*get_board_info)(void) = - (bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR); -#if !defined(CONFIG_STB03xxx) - - /* shut down the Ethernet controller that the boot rom - * sometimes leaves running. - */ - mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR); /* 1st reset MAL */ - while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {}; /* wait for the reset */ - out_be32((volatile u32*)EMAC0_BASE,0x20000000); /* then reset EMAC */ -#endif - - bd = &bdinfo; - *bdp = bd; - if ((treeboot_bd = get_board_info()) != NULL) { - memcpy(bd, treeboot_bd, sizeof(bd_t)); - } - else { - /* Hmmm...better try to stuff some defaults. - */ - bd->bi_memsize = 16 * 1024 * 1024; - cp = (u_char *)def_enet_addr; - for (i=0; i<6; i++) { - /* I should probably put different ones here, - * hopefully only one is used. - */ - bd->BD_EMAC_ADDR(0,i) = *cp; - -#ifdef CONFIG_PCI - bd->bi_pci_enetaddr[i] = *cp++; -#endif - } - bd->bi_tbfreq = 200 * 1000 * 1000; - bd->bi_intfreq = 200000000; - bd->bi_busfreq = 100000000; -#ifdef CONFIG_PCI - bd->bi_pci_busfreq = 66666666; -#endif - } - /* Yeah, this look weird, but on Redwood 4 they are - * different object in the structure. Sincr Redwwood 5 - * and Redwood 6 use OpenBIOS, it requires a special value. - */ -#if defined(CONFIG_REDWOOD_5) || defined (CONFIG_REDWOOD_6) - bd->bi_tbfreq = 27 * 1000 * 1000; -#endif - timebase_period_ns = 1000000000 / bd->bi_tbfreq; -} -#endif /* CONFIG_IBM_OPENBIOS */ - -#ifdef CONFIG_EP405 -#include <linux/serial_reg.h> - -void -embed_config(bd_t **bdp) -{ - u32 chcr0; - u_char *cp; - bd_t *bd; - - /* Different versions of the PlanetCore firmware vary in how - they set up the serial port - in particular whether they - use the internal or external serial clock for UART0. Make - sure the UART is in a known state. */ - /* FIXME: We should use the board's 11.0592MHz external serial - clock - it will be more accurate for serial rates. For - now, however the baud rates in ep405.h are for the internal - clock. */ - chcr0 = mfdcr(DCRN_CHCR0); - if ( (chcr0 & 0x1fff) != 0x103e ) { - mtdcr(DCRN_CHCR0, (chcr0 & 0xffffe000) | 0x103e); - /* The following tricks serial_init() into resetting the baud rate */ - writeb(0, UART0_IO_BASE + UART_LCR); - } - - /* We haven't seen actual problems with the EP405 leaving the - * EMAC running (as we have on Walnut). But the registers - * suggest it may not be left completely quiescent. Reset it - * just to be sure. */ - mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR); /* 1st reset MAL */ - while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {}; /* wait for the reset */ - out_be32((unsigned *)EMAC0_BASE,0x20000000); /* then reset EMAC */ - - bd = &bdinfo; - *bdp = bd; -#if 1 - cp = (u_char *)0xF0000EE0; - for (;;) { - if (*cp == 'E') { - cp++; - if (*cp == 'A') { - cp += 2; - rpx_eth(bd, cp); - } - } - - if (*cp == 'D') { - cp++; - if (*cp == '1') { - cp += 2; - rpx_memsize(bd, cp); - } - } - - if (*cp == 'N') { - cp++; - if (*cp == 'V') { - cp += 2; - rpx_nvramsize(bd, cp); - } - } - while ((*cp != '\n') && (*cp != 0xff)) - cp++; - - cp++; - if ((*cp == 0) || (*cp == 0xff)) - break; - } - bd->bi_intfreq = 200000000; - bd->bi_busfreq = 100000000; - bd->bi_pci_busfreq= 33000000 ; -#else - - bd->bi_memsize = 64000000; - bd->bi_intfreq = 200000000; - bd->bi_busfreq = 100000000; - bd->bi_pci_busfreq= 33000000 ; -#endif -} -#endif diff --git a/arch/ppc/boot/simple/head.S b/arch/ppc/boot/simple/head.S deleted file mode 100644 index 1b4d7b1d4ec1..000000000000 --- a/arch/ppc/boot/simple/head.S +++ /dev/null @@ -1,137 +0,0 @@ -/* - * Initial board bringup code for many different boards. - * - * Author: Tom Rini - * trini@mvista.com - * Derived from arch/ppc/boot/prep/head.S (Cort Dougan, many others). - * - * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <asm/reg.h> -#include <asm/cache.h> -#include <asm/ppc_asm.h> - - .text - -/* - * Begin at some arbitrary location in RAM or Flash - * Initialize core registers - * Configure memory controller (Not executing from RAM) - * Move the boot code to the link address (8M) - * Setup C stack - * Initialize UART - * Decompress the kernel to 0x0 - * Jump to the kernel entry - * - */ - - .globl start -start: - bl start_ -#ifdef CONFIG_IBM_OPENBIOS - /* The IBM "Tree" bootrom knows that the address of the bootrom - * read only structure is 4 bytes after _start. - */ - .long 0x62726f6d # structure ID - "brom" - .long 0x5f726f00 # - "_ro\0" - .long 1 # structure version - .long bootrom_cmdline # address of *bootrom_cmdline -#endif - -start_: -#ifdef CONFIG_FORCE - /* We have some really bad firmware. We must disable the L1 - * icache/dcache now or the board won't boot. - */ - li r4,0x0000 - isync - mtspr SPRN_HID0,r4 - sync - isync -#endif - -#if defined(CONFIG_MBX) || defined(CONFIG_RPX8260) || defined(CONFIG_PPC_PREP) - mr r29,r3 /* On the MBX860, r3 is the board info pointer. - * On the RPXSUPER, r3 points to the NVRAM - * configuration keys. - * On PReP, r3 is the pointer to the residual data. - */ -#endif - -#if defined(CONFIG_XILINX_VIRTEX_4_FX) - /* PPC errata 213: only for Virtex-4 FX */ - mfccr0 0 - oris 0,0,0x50000000@h - mtccr0 0 -#endif - - mflr r3 /* Save our actual starting address. */ - - /* The following functions we call must not modify r3 or r4..... - */ -#ifdef CONFIG_6xx - /* On PReP we must look at the OpenFirmware pointer and sanity - * test it. On other platforms, we disable the MMU right now - * and other bits. - */ -#ifdef CONFIG_PPC_PREP -/* - * Save the OF pointer to r25, but only if the entry point is in a sane - * location; if not we store 0. If there is no entry point, or it is - * invalid, we establish the default MSR value immediately. Otherwise, - * we defer doing that, to allow OF functions to be called, until we - * begin uncompressing the kernel. - */ - lis r8,0x0fff /* r8 = 0x0fffffff */ - ori r8,r8,0xffff - - subc r8,r8,r5 /* r8 = (r5 <= r8) ? ~0 : 0 */ - subfe r8,r8,r8 - nand r8,r8,r8 - - and. r5,r5,r8 /* r5 will be cleared if (r5 > r8) */ - bne+ haveOF - - li r8,MSR_IP|MSR_FP /* Not OF: set MSR immediately */ - mtmsr r8 - isync -haveOF: - mr r25,r5 -#else - bl disable_6xx_mmu -#endif - bl disable_6xx_l1cache - - CLEAR_CACHES -#endif - -#ifdef CONFIG_8xx - mfmsr r8 /* Turn off interrupts */ - li r9,0 - ori r9,r9,MSR_EE - andc r8,r8,r9 - mtmsr r8 - - /* We do this because some boot roms don't initialize the - * processor correctly. Don't do this if you want to debug - * using a BDM device. - */ - li r4,0 /* Zero DER to prevent FRZ */ - mtspr SPRN_DER,r4 -#endif - -#if defined(CONFIG_MBX) || defined(CONFIG_RPX8260) || defined(CONFIG_PPC_PREP) - mr r4,r29 /* put the board info pointer where the relocate - * routine will find it - */ -#endif - - /* Get the load address. - */ - subi r3, r3, 4 /* Get the actual IP, not NIP */ - b relocate - diff --git a/arch/ppc/boot/simple/iic.c b/arch/ppc/boot/simple/iic.c deleted file mode 100644 index 5e91489426b4..000000000000 --- a/arch/ppc/boot/simple/iic.c +++ /dev/null @@ -1,214 +0,0 @@ -/* Minimal support functions to read configuration from IIC EEPROMS - * on MPC8xx boards. Originally written for RPGC RPX-Lite. - * Dan Malek (dmalek@jlc.net). - */ -#include <linux/types.h> -#include <asm/uaccess.h> -#include <asm/mpc8xx.h> -#include <asm/cpm1.h> - - -/* IIC functions. - * These are just the basic master read/write operations so we can - * examine serial EEPROM. - */ -void iic_read(uint devaddr, u_char *buf, uint offset, uint count); - -static int iic_init_done; - -static void -iic_init(void) -{ - volatile iic_t *iip; - volatile i2c8xx_t *i2c; - volatile cpm8xx_t *cp; - volatile immap_t *immap; - uint dpaddr; - - immap = (immap_t *)IMAP_ADDR; - cp = (cpm8xx_t *)&(immap->im_cpm); - - /* Reset the CPM. This is necessary on the 860 processors - * that may have started the SCC1 ethernet without relocating - * the IIC. - * This also stops the Ethernet in case we were loaded by a - * BOOTP rom monitor. - */ - cp->cp_cpcr = (CPM_CR_RST | CPM_CR_FLG); - - /* Wait for it. - */ - while (cp->cp_cpcr & (CPM_CR_RST | CPM_CR_FLG)); - - /* Remove any microcode patches. We will install our own - * later. - */ - cp->cp_cpmcr1 = 0; - cp->cp_cpmcr2 = 0; - cp->cp_cpmcr3 = 0; - cp->cp_cpmcr4 = 0; - cp->cp_rccr = 0; - - iip = (iic_t *)&cp->cp_dparam[PROFF_IIC]; - i2c = (i2c8xx_t *)&(immap->im_i2c); - - /* Initialize Port B IIC pins. - */ - cp->cp_pbpar |= 0x00000030; - cp->cp_pbdir |= 0x00000030; - cp->cp_pbodr |= 0x00000030; - - /* Initialize the parameter ram. - */ - - /* Allocate space for a two transmit and one receive buffer - * descriptor in the DP ram. - * For now, this address seems OK, but it may have to - * change with newer versions of the firmware. - */ - dpaddr = 0x0840; - - /* Set up the IIC parameters in the parameter ram. - */ - iip->iic_tbase = dpaddr; - iip->iic_rbase = dpaddr + (2 * sizeof(cbd_t)); - - iip->iic_tfcr = SMC_EB; - iip->iic_rfcr = SMC_EB; - - /* This should really be done by the reader/writer. - */ - iip->iic_mrblr = 128; - - /* Initialize Tx/Rx parameters. - */ - cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_I2C, CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG); - - /* Select an arbitrary address. Just make sure it is unique. - */ - i2c->i2c_i2add = 0x34; - - /* Make clock run maximum slow. - */ - i2c->i2c_i2brg = 7; - - /* Disable interrupts. - */ - i2c->i2c_i2cmr = 0; - i2c->i2c_i2cer = 0xff; - - /* Enable SDMA. - */ - immap->im_siu_conf.sc_sdcr = 1; - - iic_init_done = 1; -} - -/* Read from IIC. - * Caller provides device address, memory buffer, and byte count. - */ -static u_char iitemp[32]; - -void -iic_read(uint devaddr, u_char *buf, uint offset, uint count) -{ - volatile iic_t *iip; - volatile i2c8xx_t *i2c; - volatile cbd_t *tbdf, *rbdf; - volatile cpm8xx_t *cp; - volatile immap_t *immap; - u_char *tb; - uint temp; - - /* If the interface has not been initialized, do that now. - */ - if (!iic_init_done) - iic_init(); - - immap = (immap_t *)IMAP_ADDR; - cp = (cpm8xx_t *)&(immap->im_cpm); - - iip = (iic_t *)&cp->cp_dparam[PROFF_IIC]; - i2c = (i2c8xx_t *)&(immap->im_i2c); - - tbdf = (cbd_t *)&cp->cp_dpmem[iip->iic_tbase]; - rbdf = (cbd_t *)&cp->cp_dpmem[iip->iic_rbase]; - - /* Send a "dummy write" operation. This is a write request with - * only the offset sent, followed by another start condition. - * This will ensure we start reading from the first location - * of the EEPROM. - */ - tb = iitemp; - tb = (u_char *)(((uint)tb + 15) & ~15); - tbdf->cbd_bufaddr = (int)tb; - *tb = devaddr & 0xfe; /* Device address */ - *(tb+1) = offset; /* Offset */ - tbdf->cbd_datlen = 2; /* Length */ - tbdf->cbd_sc = - BD_SC_READY | BD_SC_LAST | BD_SC_WRAP | BD_IIC_START; - - i2c->i2c_i2mod = 1; /* Enable */ - i2c->i2c_i2cer = 0xff; - i2c->i2c_i2com = 0x81; /* Start master */ - - /* Wait for IIC transfer. - */ -#if 0 - while ((i2c->i2c_i2cer & 3) == 0); - - if (tbdf->cbd_sc & BD_SC_READY) - printf("IIC ra complete but tbuf ready\n"); -#else - temp = 10000000; - while ((tbdf->cbd_sc & BD_SC_READY) && (temp != 0)) - temp--; -#if 0 - /* We can't do this...there is no serial port yet! - */ - if (temp == 0) { - printf("Timeout reading EEPROM\n"); - return; - } -#endif -#endif - - /* Chip errata, clear enable. - */ - i2c->i2c_i2mod = 0; - - /* To read, we need an empty buffer of the proper length. - * All that is used is the first byte for address, the remainder - * is just used for timing (and doesn't really have to exist). - */ - tbdf->cbd_bufaddr = (int)tb; - *tb = devaddr | 1; /* Device address */ - rbdf->cbd_bufaddr = (uint)buf; /* Desination buffer */ - tbdf->cbd_datlen = rbdf->cbd_datlen = count + 1; /* Length */ - tbdf->cbd_sc = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP | BD_IIC_START; - rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP; - - /* Chip bug, set enable here. - */ - i2c->i2c_i2mod = 1; /* Enable */ - i2c->i2c_i2cer = 0xff; - i2c->i2c_i2com = 0x81; /* Start master */ - - /* Wait for IIC transfer. - */ -#if 0 - while ((i2c->i2c_i2cer & 1) == 0); - - if (rbdf->cbd_sc & BD_SC_EMPTY) - printf("IIC read complete but rbuf empty\n"); -#else - temp = 10000000; - while ((tbdf->cbd_sc & BD_SC_READY) && (temp != 0)) - temp--; -#endif - - /* Chip errata, clear enable. - */ - i2c->i2c_i2mod = 0; -} diff --git a/arch/ppc/boot/simple/m8260_tty.c b/arch/ppc/boot/simple/m8260_tty.c deleted file mode 100644 index d770947e9b8f..000000000000 --- a/arch/ppc/boot/simple/m8260_tty.c +++ /dev/null @@ -1,325 +0,0 @@ -/* Minimal serial functions needed to send messages out the serial - * port on SMC1. - */ -#include <linux/types.h> -#include <asm/mpc8260.h> -#include <asm/cpm2.h> -#include <asm/immap_cpm2.h> - -uint no_print; -extern char *params[]; -extern int nparams; -static u_char cons_hold[128], *sgptr; -static int cons_hold_cnt; - -/* If defined, enables serial console. The value (1 through 4) - * should designate which SCC is used, but this isn't complete. Only - * SCC1 is known to work at this time. - * We're only linked if SERIAL_CPM_CONSOLE=y, so we only need to test - * SERIAL_CPM_SCC1. - */ -#ifdef CONFIG_SERIAL_CPM_SCC1 -#define SCC_CONSOLE 1 -#endif - -unsigned long -serial_init(int ignored, bd_t *bd) -{ -#ifdef SCC_CONSOLE - volatile scc_t *sccp; - volatile scc_uart_t *sup; -#else - volatile smc_t *sp; - volatile smc_uart_t *up; -#endif - volatile cbd_t *tbdf, *rbdf; - volatile cpm2_map_t *ip; - volatile iop_cpm2_t *io; - volatile cpm_cpm2_t *cp; - uint dpaddr, memaddr; - - ip = (cpm2_map_t *)CPM_MAP_ADDR; - cp = &ip->im_cpm; - io = &ip->im_ioport; - - /* Perform a reset. - */ - cp->cp_cpcr = (CPM_CR_RST | CPM_CR_FLG); - - /* Wait for it. - */ - while (cp->cp_cpcr & CPM_CR_FLG); - -#ifdef CONFIG_ADS8260 - /* Enable the RS-232 transceivers. - */ - *(volatile uint *)(BCSR_ADDR + 4) &= - ~(BCSR1_RS232_EN1 | BCSR1_RS232_EN2); -#endif - -#ifdef SCC_CONSOLE - sccp = (scc_t *)&(ip->im_scc[SCC_CONSOLE-1]); - sup = (scc_uart_t *)&ip->im_dprambase[PROFF_SCC1 + ((SCC_CONSOLE-1) << 8)]; - sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); - sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - - /* Use Port D for SCC1 instead of other functions. - */ - io->iop_ppard |= 0x00000003; - io->iop_psord &= ~0x00000001; /* Rx */ - io->iop_psord |= 0x00000002; /* Tx */ - io->iop_pdird &= ~0x00000001; /* Rx */ - io->iop_pdird |= 0x00000002; /* Tx */ - -#else - sp = (smc_t*)&(ip->im_smc[0]); - *(ushort *)(&ip->im_dprambase[PROFF_SMC1_BASE]) = PROFF_SMC1; - up = (smc_uart_t *)&ip->im_dprambase[PROFF_SMC1]; - - /* Disable transmitter/receiver. - */ - sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - - /* Use Port D for SMC1 instead of other functions. - */ - io->iop_ppard |= 0x00c00000; - io->iop_pdird |= 0x00400000; - io->iop_pdird &= ~0x00800000; - io->iop_psord &= ~0x00c00000; -#endif - - /* Allocate space for two buffer descriptors in the DP ram. - * For now, this address seems OK, but it may have to - * change with newer versions of the firmware. - */ - dpaddr = 0x0800; - - /* Grab a few bytes from the top of memory. - */ - memaddr = (bd->bi_memsize - 256) & ~15; - - /* Set the physical address of the host memory buffers in - * the buffer descriptors. - */ - rbdf = (cbd_t *)&ip->im_dprambase[dpaddr]; - rbdf->cbd_bufaddr = memaddr; - rbdf->cbd_sc = 0; - tbdf = rbdf + 1; - tbdf->cbd_bufaddr = memaddr+128; - tbdf->cbd_sc = 0; - - /* Set up the uart parameters in the parameter ram. - */ -#ifdef SCC_CONSOLE - sup->scc_genscc.scc_rbase = dpaddr; - sup->scc_genscc.scc_tbase = dpaddr + sizeof(cbd_t); - - /* Set up the uart parameters in the - * parameter ram. - */ - sup->scc_genscc.scc_rfcr = CPMFCR_GBL | CPMFCR_EB; - sup->scc_genscc.scc_tfcr = CPMFCR_GBL | CPMFCR_EB; - - sup->scc_genscc.scc_mrblr = 128; - sup->scc_maxidl = 8; - sup->scc_brkcr = 1; - sup->scc_parec = 0; - sup->scc_frmec = 0; - sup->scc_nosec = 0; - sup->scc_brkec = 0; - sup->scc_uaddr1 = 0; - sup->scc_uaddr2 = 0; - sup->scc_toseq = 0; - sup->scc_char1 = 0x8000; - sup->scc_char2 = 0x8000; - sup->scc_char3 = 0x8000; - sup->scc_char4 = 0x8000; - sup->scc_char5 = 0x8000; - sup->scc_char6 = 0x8000; - sup->scc_char7 = 0x8000; - sup->scc_char8 = 0x8000; - sup->scc_rccm = 0xc0ff; - - /* Send the CPM an initialize command. - */ - cp->cp_cpcr = mk_cr_cmd(CPM_CR_SCC1_PAGE, CPM_CR_SCC1_SBLOCK, 0, - CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG); - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - sccp->scc_gsmrh = 0; - sccp->scc_gsmrl = - (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); - - /* Disable all interrupts and clear all pending - * events. - */ - sccp->scc_sccm = 0; - sccp->scc_scce = 0xffff; - sccp->scc_dsr = 0x7e7e; - sccp->scc_psmr = 0x3000; - - /* Wire BRG1 to SCC1. The console driver will take care of - * others. - */ - ip->im_cpmux.cmx_scr = 0; -#else - up->smc_rbase = dpaddr; - up->smc_tbase = dpaddr+sizeof(cbd_t); - up->smc_rfcr = CPMFCR_EB; - up->smc_tfcr = CPMFCR_EB; - up->smc_brklen = 0; - up->smc_brkec = 0; - up->smc_brkcr = 0; - up->smc_mrblr = 128; - up->smc_maxidl = 8; - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; - - /* Mask all interrupts and remove anything pending. - */ - sp->smc_smcm = 0; - sp->smc_smce = 0xff; - - /* Set up the baud rate generator. - */ - ip->im_cpmux.cmx_smr = 0; -#endif - - /* The baud rate divisor needs to be coordinated with clk_8260(). - */ - ip->im_brgc1 = - (((bd->bi_brgfreq/16) / bd->bi_baudrate) << 1) | - CPM_BRG_EN; - - /* Make the first buffer the only buffer. - */ - tbdf->cbd_sc |= BD_SC_WRAP; - rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP; - - /* Initialize Tx/Rx parameters. - */ -#ifdef SCC_CONSOLE - sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); -#else - cp->cp_cpcr = mk_cr_cmd(CPM_CR_SMC1_PAGE, CPM_CR_SMC1_SBLOCK, 0, CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG); - - /* Enable transmitter/receiver. - */ - sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; -#endif - - /* This is ignored. - */ - return 0; -} - -int -serial_readbuf(u_char *cbuf) -{ - volatile cbd_t *rbdf; - volatile char *buf; -#ifdef SCC_CONSOLE - volatile scc_uart_t *sup; -#else - volatile smc_uart_t *up; -#endif - volatile cpm2_map_t *ip; - int i, nc; - - ip = (cpm2_map_t *)CPM_MAP_ADDR; - -#ifdef SCC_CONSOLE - sup = (scc_uart_t *)&ip->im_dprambase[PROFF_SCC1 + ((SCC_CONSOLE-1) << 8)]; - rbdf = (cbd_t *)&ip->im_dprambase[sup->scc_genscc.scc_rbase]; -#else - up = (smc_uart_t *)&(ip->im_dprambase[PROFF_SMC1]); - rbdf = (cbd_t *)&ip->im_dprambase[up->smc_rbase]; -#endif - - /* Wait for character to show up. - */ - buf = (char *)rbdf->cbd_bufaddr; - while (rbdf->cbd_sc & BD_SC_EMPTY); - nc = rbdf->cbd_datlen; - for (i=0; i<nc; i++) - *cbuf++ = *buf++; - rbdf->cbd_sc |= BD_SC_EMPTY; - - return(nc); -} - -void -serial_putc(void *ignored, const char c) -{ - volatile cbd_t *tbdf; - volatile char *buf; -#ifdef SCC_CONSOLE - volatile scc_uart_t *sup; -#else - volatile smc_uart_t *up; -#endif - volatile cpm2_map_t *ip; - - ip = (cpm2_map_t *)CPM_MAP_ADDR; -#ifdef SCC_CONSOLE - sup = (scc_uart_t *)&ip->im_dprambase[PROFF_SCC1 + ((SCC_CONSOLE-1) << 8)]; - tbdf = (cbd_t *)&ip->im_dprambase[sup->scc_genscc.scc_tbase]; -#else - up = (smc_uart_t *)&(ip->im_dprambase[PROFF_SMC1]); - tbdf = (cbd_t *)&ip->im_dprambase[up->smc_tbase]; -#endif - - /* Wait for last character to go. - */ - buf = (char *)tbdf->cbd_bufaddr; - while (tbdf->cbd_sc & BD_SC_READY); - - *buf = c; - tbdf->cbd_datlen = 1; - tbdf->cbd_sc |= BD_SC_READY; -} - -char -serial_getc(void *ignored) -{ - char c; - - if (cons_hold_cnt <= 0) { - cons_hold_cnt = serial_readbuf(cons_hold); - sgptr = cons_hold; - } - c = *sgptr++; - cons_hold_cnt--; - - return(c); -} - -int -serial_tstc(void *ignored) -{ - volatile cbd_t *rbdf; -#ifdef SCC_CONSOLE - volatile scc_uart_t *sup; -#else - volatile smc_uart_t *up; -#endif - volatile cpm2_map_t *ip; - - ip = (cpm2_map_t *)CPM_MAP_ADDR; -#ifdef SCC_CONSOLE - sup = (scc_uart_t *)&ip->im_dprambase[PROFF_SCC1 + ((SCC_CONSOLE-1) << 8)]; - rbdf = (cbd_t *)&ip->im_dprambase[sup->scc_genscc.scc_rbase]; -#else - up = (smc_uart_t *)&(ip->im_dprambase[PROFF_SMC1]); - rbdf = (cbd_t *)&ip->im_dprambase[up->smc_rbase]; -#endif - - return(!(rbdf->cbd_sc & BD_SC_EMPTY)); -} diff --git a/arch/ppc/boot/simple/m8xx_tty.c b/arch/ppc/boot/simple/m8xx_tty.c deleted file mode 100644 index f28924e6aeb4..000000000000 --- a/arch/ppc/boot/simple/m8xx_tty.c +++ /dev/null @@ -1,289 +0,0 @@ -/* Minimal serial functions needed to send messages out the serial - * port on the MBX console. - * - * The MBX uses SMC1 for the serial port. We reset the port and use - * only the first BD that EPPC-Bug set up as a character FIFO. - * - * Later versions (at least 1.4, maybe earlier) of the MBX EPPC-Bug - * use COM1 instead of SMC1 as the console port. This kinda sucks - * for the rest of the kernel, so here we force the use of SMC1 again. - */ -#include <linux/types.h> -#include <asm/uaccess.h> -#include <asm/mpc8xx.h> -#include <asm/cpm1.h> - -#ifdef CONFIG_MBX -#define MBX_CSR1 ((volatile u_char *)0xfa100000) -#define CSR1_COMEN (u_char)0x02 -#endif - -#ifdef TQM_SMC2_CONSOLE -#define PROFF_CONS PROFF_SMC2 -#define CPM_CR_CH_CONS CPM_CR_CH_SMC2 -#define SMC_INDEX 1 -static volatile iop8xx_t *iopp = (iop8xx_t *)&(((immap_t *)IMAP_ADDR)->im_ioport); -#else -#define PROFF_CONS PROFF_SMC1 -#define CPM_CR_CH_CONS CPM_CR_CH_SMC1 -#define SMC_INDEX 0 -#endif - -static cpm8xx_t *cpmp = (cpm8xx_t *)&(((immap_t *)IMAP_ADDR)->im_cpm); - -unsigned long -serial_init(int ignored, bd_t *bd) -{ - volatile smc_t *sp; - volatile smc_uart_t *up; - volatile cbd_t *tbdf, *rbdf; - volatile cpm8xx_t *cp; - uint dpaddr, memaddr; -#ifndef CONFIG_MBX - uint ui; -#endif - - cp = cpmp; - sp = (smc_t*)&(cp->cp_smc[SMC_INDEX]); - up = (smc_uart_t *)&cp->cp_dparam[PROFF_CONS]; - - /* Disable transmitter/receiver. - */ - sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - -#ifdef CONFIG_FADS - /* Enable SMC1/2 transceivers. - */ - *((volatile uint *)BCSR1) &= ~(BCSR1_RS232EN_1|BCSR1_RS232EN_2); -#endif - -#ifndef CONFIG_MBX - { - /* Initialize SMCx and use it for the console port. - */ - - /* Enable SDMA. - */ - ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sdcr = 1; - -#ifdef TQM_SMC2_CONSOLE - /* Use Port A for SMC2 instead of other functions. - */ - iopp->iop_papar |= 0x00c0; - iopp->iop_padir &= ~0x00c0; - iopp->iop_paodr &= ~0x00c0; -#else - /* Use Port B for SMCs instead of other functions. - */ - cp->cp_pbpar |= 0x00000cc0; - cp->cp_pbdir &= ~0x00000cc0; - cp->cp_pbodr &= ~0x00000cc0; -#endif - - /* Allocate space for two buffer descriptors in the DP ram. - * For now, this address seems OK, but it may have to - * change with newer versions of the firmware. - */ - dpaddr = 0x0800; - - /* Grab a few bytes from the top of memory for SMC FIFOs. - */ - memaddr = (bd->bi_memsize - 32) & ~15; - - /* Set the physical address of the host memory buffers in - * the buffer descriptors. - */ - rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr]; - rbdf->cbd_bufaddr = memaddr; - rbdf->cbd_sc = 0; - tbdf = rbdf + 1; - tbdf->cbd_bufaddr = memaddr+4; - tbdf->cbd_sc = 0; - - /* Set up the uart parameters in the parameter ram. - */ - up->smc_rbase = dpaddr; - up->smc_tbase = dpaddr+sizeof(cbd_t); - up->smc_rfcr = SMC_EB; - up->smc_tfcr = SMC_EB; - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; - - /* Mask all interrupts and remove anything pending. - */ - sp->smc_smcm = 0; - sp->smc_smce = 0xff; - - /* Set up the baud rate generator. - * See 8xx_io/commproc.c for details. - * This wires BRG1 to SMC1 and BRG2 to SMC2; - */ - cp->cp_simode = 0x10000000; - ui = bd->bi_intfreq / 16 / bd->bi_baudrate; -#ifdef TQM_SMC2_CONSOLE - cp->cp_brgc2 = -#else - cp->cp_brgc1 = -#endif - ((ui - 1) < 4096) - ? (((ui - 1) << 1) | CPM_BRG_EN) - : ((((ui / 16) - 1) << 1) | CPM_BRG_EN | CPM_BRG_DIV16); - -#else /* CONFIG_MBX */ - if (*MBX_CSR1 & CSR1_COMEN) { - /* COM1 is enabled. Initialize SMC1 and use it for - * the console port. - */ - - /* Enable SDMA. - */ - ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sdcr = 1; - - /* Use Port B for SMCs instead of other functions. - */ - cp->cp_pbpar |= 0x00000cc0; - cp->cp_pbdir &= ~0x00000cc0; - cp->cp_pbodr &= ~0x00000cc0; - - /* Allocate space for two buffer descriptors in the DP ram. - * For now, this address seems OK, but it may have to - * change with newer versions of the firmware. - */ - dpaddr = 0x0800; - - /* Grab a few bytes from the top of memory. EPPC-Bug isn't - * running any more, so we can do this. - */ - memaddr = (bd->bi_memsize - 32) & ~15; - - /* Set the physical address of the host memory buffers in - * the buffer descriptors. - */ - rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr]; - rbdf->cbd_bufaddr = memaddr; - rbdf->cbd_sc = 0; - tbdf = rbdf + 1; - tbdf->cbd_bufaddr = memaddr+4; - tbdf->cbd_sc = 0; - - /* Set up the uart parameters in the parameter ram. - */ - up->smc_rbase = dpaddr; - up->smc_tbase = dpaddr+sizeof(cbd_t); - up->smc_rfcr = SMC_EB; - up->smc_tfcr = SMC_EB; - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; - - /* Mask all interrupts and remove anything pending. - */ - sp->smc_smcm = 0; - sp->smc_smce = 0xff; - - /* Set up the baud rate generator. - * See 8xx_io/commproc.c for details. - */ - cp->cp_simode = 0x10000000; - cp->cp_brgc1 = - (((bd->bi_intfreq/16) / 9600) << 1) | CPM_BRG_EN; - - /* Enable SMC1 for console output. - */ - *MBX_CSR1 &= ~CSR1_COMEN; - } - else { -#endif /* ndef CONFIG_MBX */ - /* SMCx is used as console port. - */ - tbdf = (cbd_t *)&cp->cp_dpmem[up->smc_tbase]; - rbdf = (cbd_t *)&cp->cp_dpmem[up->smc_rbase]; - - /* Issue a stop transmit, and wait for it. - */ - cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_CONS, - CPM_CR_STOP_TX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG); - } - - /* Make the first buffer the only buffer. - */ - tbdf->cbd_sc |= BD_SC_WRAP; - rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP; - - /* Single character receive. - */ - up->smc_mrblr = 1; - up->smc_maxidl = 0; - - /* Initialize Tx/Rx parameters. - */ - cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_CONS, CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG); - - /* Enable transmitter/receiver. - */ - sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; - - /* This is ignored. - */ - return 0; -} - -void -serial_putc(void *ignored, const char c) -{ - volatile cbd_t *tbdf; - volatile char *buf; - volatile smc_uart_t *up; - - up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_CONS]; - tbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_tbase]; - - /* Wait for last character to go. - */ - buf = (char *)tbdf->cbd_bufaddr; - while (tbdf->cbd_sc & BD_SC_READY); - - *buf = c; - tbdf->cbd_datlen = 1; - tbdf->cbd_sc |= BD_SC_READY; -} - -char -serial_getc(void *ignored) -{ - volatile cbd_t *rbdf; - volatile char *buf; - volatile smc_uart_t *up; - char c; - - up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_CONS]; - rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase]; - - /* Wait for character to show up. - */ - buf = (char *)rbdf->cbd_bufaddr; - while (rbdf->cbd_sc & BD_SC_EMPTY); - c = *buf; - rbdf->cbd_sc |= BD_SC_EMPTY; - - return(c); -} - -int -serial_tstc(void *ignored) -{ - volatile cbd_t *rbdf; - volatile smc_uart_t *up; - - up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_CONS]; - rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase]; - - return(!(rbdf->cbd_sc & BD_SC_EMPTY)); -} diff --git a/arch/ppc/boot/simple/misc-chestnut.c b/arch/ppc/boot/simple/misc-chestnut.c deleted file mode 100644 index 14a4b56d4f84..000000000000 --- a/arch/ppc/boot/simple/misc-chestnut.c +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Setup for the IBM Chestnut (ibm-750fxgx_eval) - * - * Author: Mark A. Greer <mgreer@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/types.h> -#include <asm/io.h> -#include <asm/mv64x60_defs.h> -#include <platforms/chestnut.h> - -/* Not in the kernel so won't include kernel.h to get its 'max' definition */ -#define max(a,b) (((a) > (b)) ? (a) : (b)) - -void -mv64x60_board_init(void __iomem *old_base, void __iomem *new_base) -{ -#ifdef CONFIG_SERIAL_8250_CONSOLE - /* - * Change device bus 2 window so that bootoader can do I/O thru - * 8250/16550 UART that's mapped in that window. - */ - out_le32(new_base + MV64x60_CPU2DEV_2_BASE, CHESTNUT_UART_BASE >> 16); - out_le32(new_base + MV64x60_CPU2DEV_2_SIZE, CHESTNUT_UART_SIZE >> 16); - __asm__ __volatile__("sync"); -#endif -} diff --git a/arch/ppc/boot/simple/misc-cpci690.c b/arch/ppc/boot/simple/misc-cpci690.c deleted file mode 100644 index 8a8614d11a32..000000000000 --- a/arch/ppc/boot/simple/misc-cpci690.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Add birec data for Force CPCI690 board. - * - * Author: Mark A. Greer <source@mvista.com> - * - * 2003 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/types.h> -#include <asm/io.h> -#include <platforms/cpci690.h> - -#define KB (1024UL) -#define MB (1024UL*KB) -#define GB (1024UL*MB) - -extern u32 mv64x60_console_baud; -extern u32 mv64x60_mpsc_clk_src; -extern u32 mv64x60_mpsc_clk_freq; - -u32 mag = 0xffff; - -unsigned long -get_mem_size(void) -{ - u32 size; - - switch (in_8(((void __iomem *)CPCI690_BR_BASE + CPCI690_BR_MEM_CTLR)) - & 0x07) { - case 0x01: - size = 256*MB; - break; - case 0x02: - size = 512*MB; - break; - case 0x03: - size = 768*MB; - break; - case 0x04: - size = 1*GB; - break; - case 0x05: - size = 1*GB + 512*MB; - break; - case 0x06: - size = 2*GB; - break; - default: - size = 0; - } - - return size; -} - -void -mv64x60_board_init(void __iomem *old_base, void __iomem *new_base) -{ - mv64x60_console_baud = CPCI690_MPSC_BAUD; - mv64x60_mpsc_clk_src = CPCI690_MPSC_CLK_SRC; - mv64x60_mpsc_clk_freq = - (get_mem_size() >= (1*GB)) ? 100000000 : 133333333; -} diff --git a/arch/ppc/boot/simple/misc-embedded.c b/arch/ppc/boot/simple/misc-embedded.c deleted file mode 100644 index d5a00eb0e4eb..000000000000 --- a/arch/ppc/boot/simple/misc-embedded.c +++ /dev/null @@ -1,276 +0,0 @@ -/* - * Originally adapted by Gary Thomas. Much additional work by - * Cort Dougan <cort@fsmlabs.com>. On top of that still more work by - * Dan Malek <dmalek@jlc.net>. - * - * Currently maintained by: Tom Rini <trini@kernel.crashing.org> - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <asm/bootinfo.h> -#include <asm/mmu.h> -#include <asm/page.h> -#include <asm/residual.h> -#if defined(CONFIG_4xx) -#include <asm/ibm4xx.h> -#elif defined(CONFIG_8xx) -#include <asm/mpc8xx.h> -#elif defined(CONFIG_8260) -#include <asm/mpc8260.h> -#endif - -#include "nonstdio.h" - -/* The linker tells us where the image is. */ -extern char __image_begin, __image_end; -extern char __ramdisk_begin, __ramdisk_end; -extern char _end[]; - -/* Because of the limited amount of memory on embedded, it presents - * loading problems. The biggest is that we load this boot program - * into a relatively low memory address, and the Linux kernel Bss often - * extends into this space when it get loaded. When the kernel starts - * and zeros the BSS space, it also writes over the information we - * save here and pass to the kernel (usually board info). - * On these boards, we grab some known memory holes to hold this information. - */ -char cmd_buf[256]; -char *cmd_line = cmd_buf; -char *avail_ram; -char *end_avail; -char *zimage_start; - -/* This is for 4xx treeboot. It provides a place for the bootrom - * give us a pointer to a rom environment command line. - */ -char *bootrom_cmdline = ""; - -/* This is the default cmdline that will be given to the user at boot time.. - * If none was specified at compile time, we'll give it one that should work. - * -- Tom */ -#ifdef CONFIG_CMDLINE_BOOL -char compiled_string[] = CONFIG_CMDLINE; -#endif -char ramroot_string[] = "root=/dev/ram"; -char netroot_string[] = "root=/dev/nfs rw ip=on"; - -/* Serial port to use. */ -unsigned long com_port; - -/* We need to make sure that this is before the images to ensure - * that it's in a mapped location. - Tom */ -bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot"))); -bd_t *hold_residual = &hold_resid_buf; - -extern unsigned long serial_init(int chan, bd_t *bp); -extern void serial_close(unsigned long com_port); -extern unsigned long start; -extern void flush_instruction_cache(void); -extern void gunzip(void *, int, unsigned char *, int *); -extern void embed_config(bd_t **bp); - -/* Weak function for boards which don't need to build the - * board info struct because they are using PPCBoot/U-Boot. - */ -void __attribute__ ((weak)) -embed_config(bd_t **bdp) -{ -} - -unsigned long -load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, bd_t *bp) -{ - char *cp, ch; - int timer = 0, zimage_size; - unsigned long initrd_size; - - /* First, capture the embedded board information. Then - * initialize the serial console port. - */ - embed_config(&bp); -#if defined(CONFIG_SERIAL_CPM_CONSOLE) || \ - defined(CONFIG_SERIAL_8250_CONSOLE) || \ - defined(CONFIG_SERIAL_UARTLITE_CONSOLE) - com_port = serial_init(0, bp); -#endif - - /* Grab some space for the command line and board info. Since - * we no longer use the ELF header, but it was loaded, grab - * that space. - */ -#ifdef CONFIG_MBX - /* Because of the way the MBX loads the ELF image, we can't - * tell where we started. We read a magic variable from the NVRAM - * that gives us the intermediate buffer load address. - */ - load_addr = *(uint *)0xfa000020; - load_addr += 0x10000; /* Skip ELF header */ -#endif - /* copy board data */ - if (bp) - memcpy(hold_residual,bp,sizeof(bd_t)); - - /* Set end of memory available to us. It is always the highest - * memory address provided by the board information. - */ - end_avail = (char *)(bp->bi_memsize); - - puts("\nloaded at: "); puthex(load_addr); - puts(" "); puthex((unsigned long)(load_addr + (4*num_words))); puts("\n"); - if ( (unsigned long)load_addr != (unsigned long)&start ) { - puts("relocated to: "); puthex((unsigned long)&start); - puts(" "); - puthex((unsigned long)((unsigned long)&start + (4*num_words))); - puts("\n"); - } - - if ( bp ) { - puts("board data at: "); puthex((unsigned long)bp); - puts(" "); - puthex((unsigned long)((unsigned long)bp + sizeof(bd_t))); - puts("\nrelocated to: "); - puthex((unsigned long)hold_residual); - puts(" "); - puthex((unsigned long)((unsigned long)hold_residual + sizeof(bd_t))); - puts("\n"); - } - - /* - * We link ourself to an arbitrary low address. When we run, we - * relocate ourself to that address. __image_being points to - * the part of the image where the zImage is. -- Tom - */ - zimage_start = (char *)(unsigned long)(&__image_begin); - zimage_size = (unsigned long)(&__image_end) - - (unsigned long)(&__image_begin); - - initrd_size = (unsigned long)(&__ramdisk_end) - - (unsigned long)(&__ramdisk_begin); - - /* - * The zImage and initrd will be between start and _end, so they've - * already been moved once. We're good to go now. -- Tom - */ - puts("zimage at: "); puthex((unsigned long)zimage_start); - puts(" "); puthex((unsigned long)(zimage_size+zimage_start)); - puts("\n"); - - if ( initrd_size ) { - puts("initrd at: "); - puthex((unsigned long)(&__ramdisk_begin)); - puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n"); - } - - /* - * setup avail_ram - this is the first part of ram usable - * by the uncompress code. Anything after this program in RAM - * is now fair game. -- Tom - */ - avail_ram = (char *)PAGE_ALIGN((unsigned long)_end); - - puts("avail ram: "); puthex((unsigned long)avail_ram); puts(" "); - puthex((unsigned long)end_avail); puts("\n"); - puts("\nLinux/PPC load: "); - cp = cmd_line; - /* This is where we try and pick the right command line for booting. - * If we were given one at compile time, use it. It Is Right. - * If we weren't, see if we have a ramdisk. If so, thats root. - * When in doubt, give them the netroot (root=/dev/nfs rw) -- Tom - */ -#ifdef CONFIG_CMDLINE_BOOL - memcpy (cmd_line, compiled_string, sizeof(compiled_string)); -#else - if ( initrd_size ) - memcpy (cmd_line, ramroot_string, sizeof(ramroot_string)); - else - memcpy (cmd_line, netroot_string, sizeof(netroot_string)); -#endif - while ( *cp ) - putc(*cp++); - while (timer++ < 5*1000) { - if (tstc()) { - while ((ch = getc()) != '\n' && ch != '\r') { - if (ch == '\b' || ch == '\177') { - if (cp != cmd_line) { - cp--; - puts("\b \b"); - } - } else if (ch == '\030' /* ^x */ - || ch == '\025') { /* ^u */ - while (cp != cmd_line) { - cp--; - puts("\b \b"); - } - } else { - *cp++ = ch; - putc(ch); - } - } - break; /* Exit 'timer' loop */ - } - udelay(1000); /* 1 msec */ - } - *cp = 0; - puts("\nUncompressing Linux..."); - - gunzip(0, 0x400000, zimage_start, &zimage_size); - flush_instruction_cache(); - puts("done.\n"); - { - struct bi_record *rec; - unsigned long initrd_loc = 0; - unsigned long rec_loc = _ALIGN((unsigned long)(zimage_size) + - (1 << 20) - 1, (1 << 20)); - rec = (struct bi_record *)rec_loc; - - /* We need to make sure that the initrd and bi_recs do not - * overlap. */ - if ( initrd_size ) { - initrd_loc = (unsigned long)(&__ramdisk_begin); - /* If the bi_recs are in the middle of the current - * initrd, move the initrd to the next MB - * boundary. */ - if ((rec_loc > initrd_loc) && - ((initrd_loc + initrd_size) - > rec_loc)) { - initrd_loc = _ALIGN((unsigned long)(zimage_size) - + (2 << 20) - 1, (2 << 20)); - memmove((void *)initrd_loc, &__ramdisk_begin, - initrd_size); - puts("initrd moved: "); puthex(initrd_loc); - puts(" "); puthex(initrd_loc + initrd_size); - puts("\n"); - } - } - - rec->tag = BI_FIRST; - rec->size = sizeof(struct bi_record); - rec = (struct bi_record *)((unsigned long)rec + rec->size); - - rec->tag = BI_CMD_LINE; - memcpy( (char *)rec->data, cmd_line, strlen(cmd_line)+1); - rec->size = sizeof(struct bi_record) + strlen(cmd_line) + 1; - rec = (struct bi_record *)((unsigned long)rec + rec->size); - - if ( initrd_size ) { - rec->tag = BI_INITRD; - rec->data[0] = initrd_loc; - rec->data[1] = initrd_size; - rec->size = sizeof(struct bi_record) + 2 * - sizeof(unsigned long); - rec = (struct bi_record *)((unsigned long)rec + - rec->size); - } - - rec->tag = BI_LAST; - rec->size = sizeof(struct bi_record); - rec = (struct bi_record *)((unsigned long)rec + rec->size); - } - puts("Now booting the kernel\n"); -#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) - serial_close(com_port); -#endif - - return (unsigned long)hold_residual; -} diff --git a/arch/ppc/boot/simple/misc-ev64260.c b/arch/ppc/boot/simple/misc-ev64260.c deleted file mode 100644 index 0b3978632aca..000000000000 --- a/arch/ppc/boot/simple/misc-ev64260.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Host bridge init code for the Marvell/Galileo EV-64260-BP evaluation board - * with a GT64260 onboard. - * - * Author: Mark A. Greer <mgreer@mvista.com> - * - * 2001 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/types.h> -#include <asm/reg.h> -#include <asm/io.h> -#include <asm/mv64x60_defs.h> -#include <platforms/ev64260.h> - -#ifdef CONFIG_SERIAL_MPSC_CONSOLE -extern u32 mv64x60_console_baud; -extern u32 mv64x60_mpsc_clk_src; -extern u32 mv64x60_mpsc_clk_freq; -#endif - -void -mv64x60_board_init(void __iomem *old_base, void __iomem *new_base) -{ - u32 p, v; - - /* DINK doesn't enable 745x timebase, so enable here (Adrian Cox) */ - p = mfspr(SPRN_PVR); - p >>= 16; - - /* Reasonable SWAG at a 745x PVR value */ - if (((p & 0xfff0) == 0x8000) && (p != 0x800c)) { - v = mfspr(SPRN_HID0); - v |= HID0_TBEN; - mtspr(SPRN_HID0, v); - } - -#ifdef CONFIG_SERIAL_8250_CONSOLE - /* - * Change device bus 2 window so that bootoader can do I/O thru - * 8250/16550 UART that's mapped in that window. - */ - out_le32(new_base + MV64x60_CPU2DEV_2_BASE, EV64260_UART_BASE >> 20); - out_le32(new_base + MV64x60_CPU2DEV_2_SIZE, EV64260_UART_END >> 20); - __asm__ __volatile__("sync"); -#elif defined(CONFIG_SERIAL_MPSC_CONSOLE) - mv64x60_console_baud = EV64260_DEFAULT_BAUD; - mv64x60_mpsc_clk_src = EV64260_MPSC_CLK_SRC; - mv64x60_mpsc_clk_freq = EV64260_MPSC_CLK_FREQ; -#endif -} diff --git a/arch/ppc/boot/simple/misc-ev64360.c b/arch/ppc/boot/simple/misc-ev64360.c deleted file mode 100644 index 96eaebb78df5..000000000000 --- a/arch/ppc/boot/simple/misc-ev64360.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2005 Lee Nicks <allinux@gmail.com> - * - * Based on arch/ppc/boot/simple/misc-katana.c from: - * Mark A. Greer <source@mvista.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include <linux/types.h> -#include <asm/io.h> -#include <asm/mv64x60_defs.h> -#include <platforms/ev64360.h> - -extern u32 mv64x60_console_baud; -extern u32 mv64x60_mpsc_clk_src; -extern u32 mv64x60_mpsc_clk_freq; - -/* Not in the kernel so won't include kernel.h to get its 'min' definition */ -#ifndef min -#define min(a,b) (((a) < (b)) ? (a) : (b)) -#endif - -void -mv64x60_board_init(void __iomem *old_base, void __iomem *new_base) -{ - mv64x60_console_baud = EV64360_DEFAULT_BAUD; - mv64x60_mpsc_clk_src = EV64360_MPSC_CLK_SRC; - mv64x60_mpsc_clk_freq = EV64360_MPSC_CLK_FREQ; -} diff --git a/arch/ppc/boot/simple/misc-katana.c b/arch/ppc/boot/simple/misc-katana.c deleted file mode 100644 index 79a1bbcbc6c5..000000000000 --- a/arch/ppc/boot/simple/misc-katana.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Set up MPSC values to bootwrapper can prompt user. - * - * Author: Mark A. Greer <source@mvista.com> - * - * 2004 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/types.h> -#include <asm/io.h> -#include <asm/mv64x60_defs.h> -#include <platforms/katana.h> - -extern u32 mv64x60_console_baud; -extern u32 mv64x60_mpsc_clk_src; -extern u32 mv64x60_mpsc_clk_freq; - -/* Not in the kernel so won't include kernel.h to get its 'min' definition */ -#ifndef min -#define min(a,b) (((a) < (b)) ? (a) : (b)) -#endif - -unsigned long mv64360_get_mem_size(void); - -void -mv64x60_board_init(void __iomem *old_base, void __iomem *new_base) -{ - mv64x60_console_baud = KATANA_DEFAULT_BAUD; - mv64x60_mpsc_clk_src = KATANA_MPSC_CLK_SRC; - mv64x60_mpsc_clk_freq = - min(katana_bus_freq((void __iomem *)KATANA_CPLD_BASE), - MV64x60_TCLK_FREQ_MAX); -} - -unsigned long -get_mem_size(void) -{ - return mv64360_get_mem_size(); -} diff --git a/arch/ppc/boot/simple/misc-mv64x60.c b/arch/ppc/boot/simple/misc-mv64x60.c deleted file mode 100644 index 28b3108083ed..000000000000 --- a/arch/ppc/boot/simple/misc-mv64x60.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Relocate bridge's register base and call board specific routine. - * - * Author: Mark A. Greer <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/types.h> -#include <asm/io.h> -#include <asm/mv64x60_defs.h> - -extern struct bi_record *decompress_kernel(unsigned long load_addr, - int num_words, unsigned long cksum); - - -u32 size_reg[MV64x60_CPU2MEM_WINDOWS] = { - MV64x60_CPU2MEM_0_SIZE, MV64x60_CPU2MEM_1_SIZE, - MV64x60_CPU2MEM_2_SIZE, MV64x60_CPU2MEM_3_SIZE -}; - -/* Read mem ctlr to get the amount of mem in system */ -unsigned long -mv64360_get_mem_size(void) -{ - u32 enables, i, v; - u32 mem = 0; - - enables = in_le32((void __iomem *)CONFIG_MV64X60_NEW_BASE + - MV64360_CPU_BAR_ENABLE) & 0xf; - - for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) - if (!(enables & (1<<i))) { - v = in_le32((void __iomem *)CONFIG_MV64X60_NEW_BASE - + size_reg[i]) & 0xffff; - v = (v + 1) << 16; - mem += v; - } - - return mem; -} - -void -mv64x60_move_base(void __iomem *old_base, void __iomem *new_base) -{ - u32 bits, mask, b; - - if (old_base != new_base) { -#ifdef CONFIG_GT64260 - bits = 12; - mask = 0x07000000; -#else /* Must be mv64[34]60 */ - bits = 16; - mask = 0x03000000; -#endif - b = in_le32(old_base + MV64x60_INTERNAL_SPACE_DECODE); - b &= mask; - b |= ((u32)new_base >> (32 - bits)); - out_le32(old_base + MV64x60_INTERNAL_SPACE_DECODE, b); - - __asm__ __volatile__("sync"); - - /* Wait for change to happen (in accordance with the manual) */ - while (in_le32(new_base + MV64x60_INTERNAL_SPACE_DECODE) != b); - } -} - -void __attribute__ ((weak)) -mv64x60_board_init(void __iomem *old_base, void __iomem *new_base) -{ -} - -void * -load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, - void *ign1, void *ign2) -{ - mv64x60_move_base((void __iomem *)CONFIG_MV64X60_BASE, - (void __iomem *)CONFIG_MV64X60_NEW_BASE); - mv64x60_board_init((void __iomem *)CONFIG_MV64X60_BASE, - (void __iomem *)CONFIG_MV64X60_NEW_BASE); - return decompress_kernel(load_addr, num_words, cksum); -} diff --git a/arch/ppc/boot/simple/misc-prep.c b/arch/ppc/boot/simple/misc-prep.c deleted file mode 100644 index 0086e1cfb48c..000000000000 --- a/arch/ppc/boot/simple/misc-prep.c +++ /dev/null @@ -1,209 +0,0 @@ -/* - * Maintainer: Tom Rini <trini@kernel.crashing.org> - * - * In the past: Gary Thomas, Cort Dougan <cort@cs.nmt.edu> - */ - -#include <linux/pci_ids.h> -#include <linux/types.h> -#include <asm/residual.h> -#include <asm/string.h> -#include <asm/byteorder.h> -#include "mpc10x.h" -#include "of1275.h" -#include "nonstdio.h" - -extern int keyb_present; /* keyboard controller is present by default */ -RESIDUAL hold_resid_buf; -RESIDUAL *hold_residual = &hold_resid_buf; -static void *OFW_interface; /* Pointer to OF, if available. */ - -#ifdef CONFIG_VGA_CONSOLE -char *vidmem = (char *)0xC00B8000; -int lines = 25, cols = 80; -int orig_x, orig_y = 24; -#endif /* CONFIG_VGA_CONSOLE */ - -extern int CRT_tstc(void); -extern int vga_init(unsigned char *ISA_mem); -extern void gunzip(void *, int, unsigned char *, int *); -extern unsigned long serial_init(int chan, void *ignored); -extern void serial_fixups(void); -extern struct bi_record *decompress_kernel(unsigned long load_addr, - int num_words, unsigned long cksum); -extern void disable_6xx_mmu(void); -extern unsigned long mpc10x_get_mem_size(void); - -static void -writel(unsigned int val, unsigned int address) -{ - /* Ensure I/O operations complete */ - __asm__ volatile("eieio"); - *(unsigned int *)address = cpu_to_le32(val); -} - -#define PCI_CFG_ADDR(dev,off) ((0x80<<24) | (dev<<8) | (off&0xfc)) -#define PCI_CFG_DATA(off) (MPC10X_MAPA_CNFG_DATA+(off&3)) - -static void -pci_read_config_32(unsigned char devfn, - unsigned char offset, - unsigned int *val) -{ - /* Ensure I/O operations complete */ - __asm__ volatile("eieio"); - *(unsigned int *)PCI_CFG_ADDR(devfn,offset) = - cpu_to_le32(MPC10X_MAPA_CNFG_ADDR); - /* Ensure I/O operations complete */ - __asm__ volatile("eieio"); - *val = le32_to_cpu(*(unsigned int *)PCI_CFG_DATA(offset)); - return; -} - -#ifdef CONFIG_VGA_CONSOLE -void -scroll(void) -{ - int i; - - memcpy ( vidmem, vidmem + cols * 2, ( lines - 1 ) * cols * 2 ); - for ( i = ( lines - 1 ) * cols * 2; i < lines * cols * 2; i += 2 ) - vidmem[i] = ' '; -} -#endif /* CONFIG_VGA_CONSOLE */ - -unsigned long -load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, - RESIDUAL *residual, void *OFW) -{ - int start_multi = 0; - unsigned int pci_viddid, pci_did, tulip_pci_base, tulip_base; - - /* If we have Open Firmware, initialise it immediately */ - if (OFW) { - OFW_interface = OFW; - ofinit(OFW_interface); - } - - board_isa_init(); -#if defined(CONFIG_VGA_CONSOLE) - vga_init((unsigned char *)0xC0000000); -#endif /* CONFIG_VGA_CONSOLE */ - - if (residual) { - /* Is this Motorola PPCBug? */ - if ((1 & residual->VitalProductData.FirmwareSupports) && - (1 == residual->VitalProductData.FirmwareSupplier)) { - unsigned char base_mod; - unsigned char board_type = inb(0x801) & 0xF0; - - /* - * Reset the onboard 21x4x Ethernet - * Motorola Ethernet is at IDSEL 14 (devfn 0x70) - */ - pci_read_config_32(0x70, 0x00, &pci_viddid); - pci_did = (pci_viddid & 0xffff0000) >> 16; - /* Be sure we've really found a 21x4x chip */ - if (((pci_viddid & 0xffff) == PCI_VENDOR_ID_DEC) && - ((pci_did == PCI_DEVICE_ID_DEC_TULIP_FAST) || - (pci_did == PCI_DEVICE_ID_DEC_TULIP) || - (pci_did == PCI_DEVICE_ID_DEC_TULIP_PLUS) || - (pci_did == PCI_DEVICE_ID_DEC_21142))) { - pci_read_config_32(0x70, - 0x10, - &tulip_pci_base); - /* Get the physical base address */ - tulip_base = - (tulip_pci_base & ~0x03UL) + 0x80000000; - /* Strobe the 21x4x reset bit in CSR0 */ - writel(0x1, tulip_base); - } - - /* If this is genesis 2 board then check for no - * keyboard controller and more than one processor. - */ - if (board_type == 0xe0) { - base_mod = inb(0x803); - /* if a MVME2300/2400 or a Sitka then no keyboard */ - if((base_mod == 0xFA) || (base_mod == 0xF9) || - (base_mod == 0xE1)) { - keyb_present = 0; /* no keyboard */ - } - } - /* If this is a multiprocessor system then - * park the other processor so that the - * kernel knows where to find them. - */ - if (residual->MaxNumCpus > 1) - start_multi = 1; - } - memcpy(hold_residual,residual,sizeof(RESIDUAL)); - } - - /* Call decompress_kernel */ - decompress_kernel(load_addr, num_words, cksum); - - if (start_multi) { - residual->VitalProductData.SmpIar = (unsigned long)0xc0; - residual->Cpus[1].CpuState = CPU_GOOD; - hold_residual->VitalProductData.Reserved5 = 0xdeadbeef; - } - - /* Now go and clear out the BATs and ensure that our MSR is - * correct .*/ - disable_6xx_mmu(); - - /* Make r3 be a pointer to the residual data. */ - return (unsigned long)hold_residual; -} - -unsigned long -get_mem_size(void) -{ - unsigned int pci_viddid, pci_did; - - /* First, figure out what kind of host bridge we are on. If it's - * an MPC10x, we can ask it directly how much memory it has. - * Otherwise, see if the residual data has anything. This isn't - * the best way, but it can be the only way. If there's nothing, - * assume 32MB. -- Tom. - */ - /* See what our host bridge is. */ - pci_read_config_32(0x00, 0x00, &pci_viddid); - pci_did = (pci_viddid & 0xffff0000) >> 16; - /* See if we are on an MPC10x. */ - if (((pci_viddid & 0xffff) == PCI_VENDOR_ID_MOTOROLA) - && ((pci_did == PCI_DEVICE_ID_MOTOROLA_MPC105) - || (pci_did == PCI_DEVICE_ID_MOTOROLA_MPC106) - || (pci_did == PCI_DEVICE_ID_MOTOROLA_MPC107))) - return mpc10x_get_mem_size(); - /* If it's not, see if we have anything in the residual data. */ - else if (hold_residual && hold_residual->TotalMemory) - return hold_residual->TotalMemory; - else if (OFW_interface) { - /* - * This is a 'best guess' check. We want to make sure - * we don't try this on a PReP box without OF - * -- Cort - */ - while (OFW_interface) - { - phandle dev_handle; - int mem_info[2]; - - /* get handle to memory description */ - if (!(dev_handle = finddevice("/memory@0"))) - break; - - /* get the info */ - if (getprop(dev_handle, "reg", mem_info, - sizeof(mem_info)) != 8) - break; - - return mem_info[1]; - } - } - - /* Fall back to hard-coding 32MB. */ - return 32*1024*1024; -} diff --git a/arch/ppc/boot/simple/misc-radstone_ppc7d.c b/arch/ppc/boot/simple/misc-radstone_ppc7d.c deleted file mode 100644 index 0f302ea9c3d1..000000000000 --- a/arch/ppc/boot/simple/misc-radstone_ppc7d.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Misc data for Radstone PPC7D board. - * - * Author: James Chapman <jchapman@katalix.com> - */ - -#include <linux/types.h> -#include <platforms/radstone_ppc7d.h> - -#if defined(CONFIG_SERIAL_MPSC_CONSOLE) -extern u32 mv64x60_console_baud; -extern u32 mv64x60_mpsc_clk_src; -extern u32 mv64x60_mpsc_clk_freq; -#endif - -void -mv64x60_board_init(void __iomem *old_base, void __iomem *new_base) -{ -#if defined(CONFIG_SERIAL_MPSC_CONSOLE) - mv64x60_console_baud = PPC7D_DEFAULT_BAUD; - mv64x60_mpsc_clk_src = PPC7D_MPSC_CLK_SRC; - mv64x60_mpsc_clk_freq = PPC7D_MPSC_CLK_FREQ; -#endif -} diff --git a/arch/ppc/boot/simple/misc-spruce.c b/arch/ppc/boot/simple/misc-spruce.c deleted file mode 100644 index 5b3a6c6f113b..000000000000 --- a/arch/ppc/boot/simple/misc-spruce.c +++ /dev/null @@ -1,271 +0,0 @@ -/* - * Misc. bootloader code for IBM Spruce reference platform - * - * Authors: Johnnie Peters <jpeters@mvista.com> - * Matt Porter <mporter@mvista.com> - * - * Derived from arch/ppc/boot/prep/misc.c - * - * 2000-2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/types.h> -#include <linux/pci.h> - -#include <asm/bootinfo.h> - -extern unsigned long decompress_kernel(unsigned long load_addr, int num_words, - unsigned long cksum); - -/* Define some important locations of the Spruce. */ -#define SPRUCE_PCI_CONFIG_ADDR 0xfec00000 -#define SPRUCE_PCI_CONFIG_DATA 0xfec00004 - -/* PCI configuration space access routines. */ -unsigned int *pci_config_address = (unsigned int *)SPRUCE_PCI_CONFIG_ADDR; -unsigned char *pci_config_data = (unsigned char *)SPRUCE_PCI_CONFIG_DATA; - -void cpc700_pcibios_read_config_byte(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned char *val) -{ - out_le32(pci_config_address, - (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000)); - - *val= (in_le32((unsigned *)pci_config_data) >> (8 * (offset & 3))) & 0xff; -} - -void cpc700_pcibios_write_config_byte(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned char val) -{ - out_le32(pci_config_address, - (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000)); - - out_8(pci_config_data + (offset&3), val); -} - -void cpc700_pcibios_read_config_word(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned short *val) -{ - out_le32(pci_config_address, - (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000)); - - *val= in_le16((unsigned short *)(pci_config_data + (offset&3))); -} - -void cpc700_pcibios_write_config_word(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned short val) -{ - out_le32(pci_config_address, - (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000)); - - out_le16((unsigned short *)(pci_config_data + (offset&3)), val); -} - -void cpc700_pcibios_read_config_dword(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned int *val) -{ - out_le32(pci_config_address, - (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000)); - - *val= in_le32((unsigned *)pci_config_data); -} - -void cpc700_pcibios_write_config_dword(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned int val) -{ - out_le32(pci_config_address, - (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000)); - - out_le32((unsigned *)pci_config_data, val); -} - -#define PCNET32_WIO_RDP 0x10 -#define PCNET32_WIO_RAP 0x12 -#define PCNET32_WIO_RESET 0x14 - -#define PCNET32_DWIO_RDP 0x10 -#define PCNET32_DWIO_RAP 0x14 -#define PCNET32_DWIO_RESET 0x18 - -/* Processor interface config register access */ -#define PIFCFGADDR 0xff500000 -#define PIFCFGDATA 0xff500004 - -#define PLBMIFOPT 0x18 /* PLB Master Interface Options */ - -#define MEM_MBEN 0x24 -#define MEM_TYPE 0x28 -#define MEM_B1SA 0x3c -#define MEM_B1EA 0x5c -#define MEM_B2SA 0x40 -#define MEM_B2EA 0x60 - -unsigned long -get_mem_size(void) -{ - int loop; - unsigned long mem_size = 0; - unsigned long mem_mben; - unsigned long mem_type; - unsigned long mem_start; - unsigned long mem_end; - volatile int *mem_addr = (int *)0xff500008; - volatile int *mem_data = (int *)0xff50000c; - - /* Get the size of memory from the memory controller. */ - *mem_addr = MEM_MBEN; - asm("sync"); - mem_mben = *mem_data; - asm("sync"); - for(loop = 0; loop < 1000; loop++); - - *mem_addr = MEM_TYPE; - asm("sync"); - mem_type = *mem_data; - asm("sync"); - for(loop = 0; loop < 1000; loop++); - - *mem_addr = MEM_TYPE; - /* Confirm bank 1 has DRAM memory */ - if ((mem_mben & 0x40000000) && - ((mem_type & 0x30000000) == 0x10000000)) { - *mem_addr = MEM_B1SA; - asm("sync"); - mem_start = *mem_data; - asm("sync"); - for(loop = 0; loop < 1000; loop++); - - *mem_addr = MEM_B1EA; - asm("sync"); - mem_end = *mem_data; - asm("sync"); - for(loop = 0; loop < 1000; loop++); - - mem_size = mem_end - mem_start + 0x100000; - } - - /* Confirm bank 2 has DRAM memory */ - if ((mem_mben & 0x20000000) && - ((mem_type & 0xc000000) == 0x4000000)) { - *mem_addr = MEM_B2SA; - asm("sync"); - mem_start = *mem_data; - asm("sync"); - for(loop = 0; loop < 1000; loop++); - - *mem_addr = MEM_B2EA; - asm("sync"); - mem_end = *mem_data; - asm("sync"); - for(loop = 0; loop < 1000; loop++); - - mem_size += mem_end - mem_start + 0x100000; - } - return mem_size; -} - -unsigned long -load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, - void *ign1, void *ign2) -{ - int csr0; - int csr_id; - int pci_devfn; - int found_multi = 0; - unsigned short vendor; - unsigned short device; - unsigned short command; - unsigned char header_type; - unsigned int bar0; - volatile int *pif_addr = (int *)0xff500000; - volatile int *pif_data = (int *)0xff500004; - - /* - * Gah, these firmware guys need to learn that hardware - * byte swapping is evil! Disable all hardware byte - * swapping so it doesn't hurt anyone. - */ - *pif_addr = PLBMIFOPT; - asm("sync"); - *pif_data = 0x00000000; - asm("sync"); - - /* Search out and turn off the PcNet ethernet boot device. */ - for (pci_devfn = 1; pci_devfn < 0xff; pci_devfn++) { - if (PCI_FUNC(pci_devfn) && !found_multi) - continue; - - cpc700_pcibios_read_config_byte(0, pci_devfn, - PCI_HEADER_TYPE, &header_type); - - if (!PCI_FUNC(pci_devfn)) - found_multi = header_type & 0x80; - - cpc700_pcibios_read_config_word(0, pci_devfn, PCI_VENDOR_ID, - &vendor); - - if (vendor != 0xffff) { - cpc700_pcibios_read_config_word(0, pci_devfn, - PCI_DEVICE_ID, &device); - - /* If this PCI device is the Lance PCNet board then turn it off */ - if ((vendor == PCI_VENDOR_ID_AMD) && - (device == PCI_DEVICE_ID_AMD_LANCE)) { - - /* Turn on I/O Space on the board. */ - cpc700_pcibios_read_config_word(0, pci_devfn, - PCI_COMMAND, &command); - command |= 0x1; - cpc700_pcibios_write_config_word(0, pci_devfn, - PCI_COMMAND, command); - - /* Get the I/O space address */ - cpc700_pcibios_read_config_dword(0, pci_devfn, - PCI_BASE_ADDRESS_0, &bar0); - bar0 &= 0xfffffffe; - - /* Reset the PCNet Board */ - inl (bar0+PCNET32_DWIO_RESET); - inw (bar0+PCNET32_WIO_RESET); - - /* First do a work oriented read of csr0. If the value is - * 4 then this is the correct mode to access the board. - * If not try a double word ortiented read. - */ - outw(0, bar0 + PCNET32_WIO_RAP); - csr0 = inw(bar0 + PCNET32_WIO_RDP); - - if (csr0 == 4) { - /* Check the Chip id register */ - outw(88, bar0 + PCNET32_WIO_RAP); - csr_id = inw(bar0 + PCNET32_WIO_RDP); - - if (csr_id) { - /* This is the valid mode - set the stop bit */ - outw(0, bar0 + PCNET32_WIO_RAP); - outw(csr0, bar0 + PCNET32_WIO_RDP); - } - } else { - outl(0, bar0 + PCNET32_DWIO_RAP); - csr0 = inl(bar0 + PCNET32_DWIO_RDP); - if (csr0 == 4) { - /* Check the Chip id register */ - outl(88, bar0 + PCNET32_WIO_RAP); - csr_id = inl(bar0 + PCNET32_WIO_RDP); - - if (csr_id) { - /* This is the valid mode - set the stop bit*/ - outl(0, bar0 + PCNET32_WIO_RAP); - outl(csr0, bar0 + PCNET32_WIO_RDP); - } - } - } - } - } - } - - return decompress_kernel(load_addr, num_words, cksum); -} diff --git a/arch/ppc/boot/simple/misc.c b/arch/ppc/boot/simple/misc.c deleted file mode 100644 index c3d3305eb5ca..000000000000 --- a/arch/ppc/boot/simple/misc.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * Misc. bootloader code for many machines. This assumes you have are using - * a 6xx/7xx/74xx CPU in your machine. This assumes the chunk of memory - * below 8MB is free. Finally, it assumes you have a NS16550-style uart for - * your serial console. If a machine meets these requirements, it can quite - * likely use this code during boot. - * - * Author: Matt Porter <mporter@mvista.com> - * Derived from arch/ppc/boot/prep/misc.c - * - * 2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/types.h> -#include <linux/string.h> - -#include <asm/page.h> -#include <asm/mmu.h> -#include <asm/bootinfo.h> -#ifdef CONFIG_4xx -#include <asm/ibm4xx.h> -#endif -#include <asm/reg.h> - -#include "nonstdio.h" - -/* Default cmdline */ -#ifdef CONFIG_CMDLINE -#define CMDLINE CONFIG_CMDLINE -#else -#define CMDLINE "" -#endif - -/* Keyboard (and VGA console)? */ -#ifdef CONFIG_VGA_CONSOLE -#define HAS_KEYB 1 -#else -#define HAS_KEYB 0 -#endif - -/* Will / Can the user give input? - */ -#if (defined(CONFIG_SERIAL_8250_CONSOLE) \ - || defined(CONFIG_VGA_CONSOLE) \ - || defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \ - || defined(CONFIG_SERIAL_MPSC_CONSOLE)) -#define INTERACTIVE_CONSOLE 1 -#endif - -char *avail_ram; -char *end_avail; -char *zimage_start; -char cmd_preset[] = CMDLINE; -char cmd_buf[256]; -char *cmd_line = cmd_buf; -int keyb_present = HAS_KEYB; -int zimage_size; - -unsigned long com_port; -unsigned long initrd_size = 0; - -/* The linker tells us various locations in the image */ -extern char __image_begin, __image_end; -extern char __ramdisk_begin, __ramdisk_end; -extern char _end[]; -/* Original location */ -extern unsigned long start; - -extern int CRT_tstc(void); -extern unsigned long serial_init(int chan, void *ignored); -extern void serial_close(unsigned long com_port); -extern void gunzip(void *, int, unsigned char *, int *); -extern void serial_fixups(void); - -/* Allow get_mem_size to be hooked into. This is the default. */ -unsigned long __attribute__ ((weak)) -get_mem_size(void) -{ - return 0; -} - -#if defined(CONFIG_40x) -#define PPC4xx_EMAC0_MR0 EMAC0_BASE -#endif - -#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0) -#define PPC4xx_EMAC0_MR0 PPC44x_EMAC0_MR0 -#endif - -struct bi_record * -decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum) -{ -#ifdef INTERACTIVE_CONSOLE - int timer = 0; - char ch; -#endif - char *cp; - struct bi_record *rec; - unsigned long initrd_loc = 0, TotalMemory = 0; - -#if defined(CONFIG_SERIAL_8250_CONSOLE) || defined(CONFIG_SERIAL_MPSC_CONSOLE) - com_port = serial_init(0, NULL); -#endif - -#if defined(PPC4xx_EMAC0_MR0) - /* Reset MAL */ - mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR); - /* Wait for reset */ - while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {}; - /* Reset EMAC */ - *(volatile unsigned long *)PPC4xx_EMAC0_MR0 = 0x20000000; - __asm__ __volatile__("eieio"); -#endif - - /* - * Call get_mem_size(), which is memory controller dependent, - * and we must have the correct file linked in here. - */ - TotalMemory = get_mem_size(); - - /* assume the chunk below 8M is free */ - end_avail = (char *)0x00800000; - - /* - * Reveal where we were loaded at and where we - * were relocated to. - */ - puts("loaded at: "); puthex(load_addr); - puts(" "); puthex((unsigned long)(load_addr + (4*num_words))); - puts("\n"); - if ( (unsigned long)load_addr != (unsigned long)&start ) - { - puts("relocated to: "); puthex((unsigned long)&start); - puts(" "); - puthex((unsigned long)((unsigned long)&start + (4*num_words))); - puts("\n"); - } - - /* - * We link ourself to 0x00800000. When we run, we relocate - * ourselves there. So we just need __image_begin for the - * start. -- Tom - */ - zimage_start = (char *)(unsigned long)(&__image_begin); - zimage_size = (unsigned long)(&__image_end) - - (unsigned long)(&__image_begin); - - initrd_size = (unsigned long)(&__ramdisk_end) - - (unsigned long)(&__ramdisk_begin); - - /* - * The zImage and initrd will be between start and _end, so they've - * already been moved once. We're good to go now. -- Tom - */ - avail_ram = (char *)PAGE_ALIGN((unsigned long)_end); - puts("zimage at: "); puthex((unsigned long)zimage_start); - puts(" "); puthex((unsigned long)(zimage_size+zimage_start)); - puts("\n"); - - if ( initrd_size ) { - puts("initrd at: "); - puthex((unsigned long)(&__ramdisk_begin)); - puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n"); - } - -#ifndef CONFIG_40x /* don't overwrite the 40x image located at 0x00400000! */ - avail_ram = (char *)0x00400000; -#endif - end_avail = (char *)0x00800000; - puts("avail ram: "); puthex((unsigned long)avail_ram); puts(" "); - puthex((unsigned long)end_avail); puts("\n"); - - if (keyb_present) - CRT_tstc(); /* Forces keyboard to be initialized */ - - /* Display standard Linux/PPC boot prompt for kernel args */ - puts("\nLinux/PPC load: "); - cp = cmd_line; - memcpy (cmd_line, cmd_preset, sizeof(cmd_preset)); - while ( *cp ) putc(*cp++); - -#ifdef INTERACTIVE_CONSOLE - /* - * If they have a console, allow them to edit the command line. - * Otherwise, don't bother wasting the five seconds. - */ - while (timer++ < 5*1000) { - if (tstc()) { - while ((ch = getc()) != '\n' && ch != '\r') { - /* Test for backspace/delete */ - if (ch == '\b' || ch == '\177') { - if (cp != cmd_line) { - cp--; - puts("\b \b"); - } - /* Test for ^x/^u (and wipe the line) */ - } else if (ch == '\030' || ch == '\025') { - while (cp != cmd_line) { - cp--; - puts("\b \b"); - } - } else { - *cp++ = ch; - putc(ch); - } - } - break; /* Exit 'timer' loop */ - } - udelay(1000); /* 1 msec */ - } - *cp = 0; -#endif - puts("\n"); - - puts("Uncompressing Linux..."); - gunzip(NULL, 0x400000, zimage_start, &zimage_size); - puts("done.\n"); - - /* get the bi_rec address */ - rec = bootinfo_addr(zimage_size); - - /* We need to make sure that the initrd and bi_recs do not - * overlap. */ - if ( initrd_size ) { - unsigned long rec_loc = (unsigned long) rec; - initrd_loc = (unsigned long)(&__ramdisk_begin); - /* If the bi_recs are in the middle of the current - * initrd, move the initrd to the next MB - * boundary. */ - if ((rec_loc > initrd_loc) && - ((initrd_loc + initrd_size) > rec_loc)) { - initrd_loc = _ALIGN((unsigned long)(zimage_size) - + (2 << 20) - 1, (2 << 20)); - memmove((void *)initrd_loc, &__ramdisk_begin, - initrd_size); - puts("initrd moved: "); puthex(initrd_loc); - puts(" "); puthex(initrd_loc + initrd_size); - puts("\n"); - } - } - - bootinfo_init(rec); - if ( TotalMemory ) - bootinfo_append(BI_MEMSIZE, sizeof(int), (void*)&TotalMemory); - - bootinfo_append(BI_CMD_LINE, strlen(cmd_line)+1, (void*)cmd_line); - - /* add a bi_rec for the initrd if it exists */ - if (initrd_size) { - unsigned long initrd[2]; - - initrd[0] = initrd_loc; - initrd[1] = initrd_size; - - bootinfo_append(BI_INITRD, sizeof(initrd), &initrd); - } - puts("Now booting the kernel\n"); - serial_close(com_port); - - return rec; -} - -void __attribute__ ((weak)) -board_isa_init(void) -{ -} - -/* Allow decompress_kernel to be hooked into. This is the default. */ -void * __attribute__ ((weak)) -load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, - void *ign1, void *ign2) -{ - board_isa_init(); - return decompress_kernel(load_addr, num_words, cksum); -} diff --git a/arch/ppc/boot/simple/mpc10x_memory.c b/arch/ppc/boot/simple/mpc10x_memory.c deleted file mode 100644 index 8da8f576031d..000000000000 --- a/arch/ppc/boot/simple/mpc10x_memory.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * A routine to find out how much memory the machine has. - * - * Based on: - * arch/ppc/kernel/mpc10x_common.c - * - * Author: Mark A. Greer - * mgreer@mvista.com - * - * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/pci.h> -#include <asm/types.h> -#include <asm/io.h> -#include "mpc10x.h" - -/* - * *** WARNING - A BAT MUST be set to access the PCI config addr/data regs *** - */ - -/* - * PCI config space macros, similar to indirect_xxx and early_xxx macros. - * We assume bus 0. - */ -#define MPC10X_CFG_read(val, addr, type, op) *val = op((type)(addr)) -#define MPC10X_CFG_write(val, addr, type, op) op((type *)(addr), (val)) - -#define MPC10X_PCI_OP(rw, size, type, op, mask) \ -static void \ -mpc10x_##rw##_config_##size(unsigned int __iomem *cfg_addr, \ - unsigned int *cfg_data, int devfn, int offset, \ - type val) \ -{ \ - out_be32(cfg_addr, \ - ((offset & 0xfc) << 24) | (devfn << 16) \ - | (0 << 8) | 0x80); \ - MPC10X_CFG_##rw(val, cfg_data + (offset & mask), type, op); \ - return; \ -} - -MPC10X_PCI_OP(read, byte, u8 *, in_8, 3) -MPC10X_PCI_OP(read, dword, u32 *, in_le32, 0) - -/* - * Read the memory controller registers to determine the amount of memory in - * the system. This assumes that the firmware has correctly set up the memory - * controller registers. On CONFIG_PPC_PREP, we know we are being called - * under a PReP memory map. On all other machines, we assume we are under - * a CHRP memory map. Further, on CONFIG_PPC_PREP we must rename - * this function. - */ -#ifdef CONFIG_PPC_PREP -#define get_mem_size mpc10x_get_mem_size -#endif -unsigned long -get_mem_size(void) -{ - unsigned int *config_addr, *config_data, val; - unsigned long start, end, total, offset; - int i; - unsigned char bank_enables; - -#ifdef CONFIG_PPC_PREP - config_addr = (unsigned int *)MPC10X_MAPA_CNFG_ADDR; - config_data = (unsigned int *)MPC10X_MAPA_CNFG_DATA; -#else - config_addr = (unsigned int *)MPC10X_MAPB_CNFG_ADDR; - config_data = (unsigned int *)MPC10X_MAPB_CNFG_DATA; -#endif - - mpc10x_read_config_byte(config_addr, config_data, PCI_DEVFN(0,0), - MPC10X_MCTLR_MEM_BANK_ENABLES, &bank_enables); - - total = 0; - - for (i = 0; i < 8; i++) { - if (bank_enables & (1 << i)) { - offset = MPC10X_MCTLR_MEM_START_1 + ((i > 3) ? 4 : 0); - mpc10x_read_config_dword(config_addr, config_data, - PCI_DEVFN(0,0), offset, &val); - start = (val >> ((i & 3) << 3)) & 0xff; - - offset = MPC10X_MCTLR_EXT_MEM_START_1 + ((i>3) ? 4 : 0); - mpc10x_read_config_dword(config_addr, config_data, - PCI_DEVFN(0,0), offset, &val); - val = (val >> ((i & 3) << 3)) & 0x03; - start = (val << 28) | (start << 20); - - offset = MPC10X_MCTLR_MEM_END_1 + ((i > 3) ? 4 : 0); - mpc10x_read_config_dword(config_addr, config_data, - PCI_DEVFN(0,0), offset, &val); - end = (val >> ((i & 3) << 3)) & 0xff; - - offset = MPC10X_MCTLR_EXT_MEM_END_1 + ((i > 3) ? 4 : 0); - mpc10x_read_config_dword(config_addr, config_data, - PCI_DEVFN(0,0), offset, &val); - val = (val >> ((i & 3) << 3)) & 0x03; - end = (val << 28) | (end << 20) | 0xfffff; - - total += (end - start + 1); - } - } - - return total; -} diff --git a/arch/ppc/boot/simple/mpc52xx_tty.c b/arch/ppc/boot/simple/mpc52xx_tty.c deleted file mode 100644 index 6955891fb031..000000000000 --- a/arch/ppc/boot/simple/mpc52xx_tty.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * Minimal serial functions needed to send messages out a MPC52xx - * Programmable Serial Controller (PSC). - * - * Author: Dale Farnsworth <dfarnsworth@mvista.com> - * - * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is licensed - * "as is" without any warranty of any kind, whether express or implied. - */ - -#include <linux/types.h> -#include <asm/uaccess.h> -#include <asm/mpc52xx.h> -#include <asm/mpc52xx_psc.h> -#include <asm/serial.h> -#include <asm/io.h> -#include <asm/time.h> - - -#ifdef MPC52xx_PF_CONSOLE_PORT -#define MPC52xx_CONSOLE MPC52xx_PSCx_OFFSET(MPC52xx_PF_CONSOLE_PORT) -#define MPC52xx_PSC_CONFIG_SHIFT ((MPC52xx_PF_CONSOLE_PORT-1)<<2) -#else -#error "MPC52xx_PF_CONSOLE_PORT not defined" -#endif - -static struct mpc52xx_psc __iomem *psc = - (struct mpc52xx_psc __iomem *) MPC52xx_PA(MPC52xx_CONSOLE); - -/* The decrementer counts at the system bus clock frequency - * divided by four. The most accurate time base is connected to the - * rtc. We read the decrementer change during one rtc tick - * and multiply by 4 to get the system bus clock frequency. Since a - * rtc tick is one seconds, and that's pretty long, we change the rtc - * dividers temporarily to set them 64x faster ;) - */ -static int -mpc52xx_ipbfreq(void) -{ - struct mpc52xx_rtc __iomem *rtc = - (struct mpc52xx_rtc __iomem *) MPC52xx_PA(MPC52xx_RTC_OFFSET); - struct mpc52xx_cdm __iomem *cdm = - (struct mpc52xx_cdm __iomem *) MPC52xx_PA(MPC52xx_CDM_OFFSET); - int current_time, previous_time; - int tbl_start, tbl_end; - int xlbfreq, ipbfreq; - - out_be32(&rtc->dividers, 0x8f1f0000); /* Set RTC 64x faster */ - previous_time = in_be32(&rtc->time); - while ((current_time = in_be32(&rtc->time)) == previous_time) ; - tbl_start = get_tbl(); - previous_time = current_time; - while ((current_time = in_be32(&rtc->time)) == previous_time) ; - tbl_end = get_tbl(); - out_be32(&rtc->dividers, 0xffff0000); /* Restore RTC */ - - xlbfreq = (tbl_end - tbl_start) << 8; - ipbfreq = (in_8(&cdm->ipb_clk_sel) & 1) ? xlbfreq / 2 : xlbfreq; - - return ipbfreq; -} - -unsigned long -serial_init(int ignored, void *ignored2) -{ - struct mpc52xx_gpio __iomem *gpio = - (struct mpc52xx_gpio __iomem *) MPC52xx_PA(MPC52xx_GPIO_OFFSET); - int divisor; - int mode1; - int mode2; - u32 val32; - - static int been_here = 0; - - if (been_here) - return 0; - - been_here = 1; - - val32 = in_be32(&gpio->port_config); - val32 &= ~(0x7 << MPC52xx_PSC_CONFIG_SHIFT); - val32 |= MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD - << MPC52xx_PSC_CONFIG_SHIFT; - out_be32(&gpio->port_config, val32); - - out_8(&psc->command, MPC52xx_PSC_RST_TX - | MPC52xx_PSC_RX_DISABLE | MPC52xx_PSC_TX_ENABLE); - out_8(&psc->command, MPC52xx_PSC_RST_RX); - - out_be32(&psc->sicr, 0x0); - out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00); - out_be16(&psc->tfalarm, 0xf8); - - out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1 - | MPC52xx_PSC_RX_ENABLE - | MPC52xx_PSC_TX_ENABLE); - - divisor = ((mpc52xx_ipbfreq() - / (CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD * 16)) + 1) >> 1; - - mode1 = MPC52xx_PSC_MODE_8_BITS | MPC52xx_PSC_MODE_PARNONE - | MPC52xx_PSC_MODE_ERR; - mode2 = MPC52xx_PSC_MODE_ONE_STOP; - - out_8(&psc->ctur, divisor>>8); - out_8(&psc->ctlr, divisor); - out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1); - out_8(&psc->mode, mode1); - out_8(&psc->mode, mode2); - - return 0; /* ignored */ -} - -void -serial_putc(void *ignored, const char c) -{ - serial_init(0, NULL); - - while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP)) ; - out_8(&psc->mpc52xx_psc_buffer_8, c); - while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP)) ; -} - -char -serial_getc(void *ignored) -{ - while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_RXRDY)) ; - - return in_8(&psc->mpc52xx_psc_buffer_8); -} - -int -serial_tstc(void *ignored) -{ - return (in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_RXRDY) != 0; -} diff --git a/arch/ppc/boot/simple/mv64x60_tty.c b/arch/ppc/boot/simple/mv64x60_tty.c deleted file mode 100644 index 8a735787a6e9..000000000000 --- a/arch/ppc/boot/simple/mv64x60_tty.c +++ /dev/null @@ -1,364 +0,0 @@ -/* - * Bootloader version of the embedded MPSC/UART driver for the Marvell 64x60. - * Note: Due to a GT64260A erratum, DMA will be used for UART input (via SDMA). - * - * Author: Mark A. Greer <mgreer@mvista.com> - * - * 2001 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -/* This code assumes that the data cache has been disabled (L1, L2, L3). */ - -#include <linux/types.h> -#include <linux/serial_reg.h> -#include <asm/serial.h> -#include <asm/io.h> -#include <asm/mv64x60_defs.h> -#include <mpsc_defs.h> - -#ifdef CONFIG_EV64360 -#include <platforms/ev64360.h> -u32 mv64x60_console_baud = EV64360_DEFAULT_BAUD; -u32 mv64x60_mpsc_clk_src = EV64360_MPSC_CLK_SRC; /* TCLK */ -u32 mv64x60_mpsc_clk_freq = EV64360_MPSC_CLK_FREQ; -#else -u32 mv64x60_console_baud = 9600; -u32 mv64x60_mpsc_clk_src = 8; /* TCLK */ -u32 mv64x60_mpsc_clk_freq = 100000000; -#endif - -extern void udelay(long); -static void stop_dma(int chan); - -static void __iomem *mv64x60_base = (void __iomem *)CONFIG_MV64X60_NEW_BASE; - -struct sdma_regs { - u32 sdc; - u32 sdcm; - u32 rx_desc; - u32 rx_buf_ptr; - u32 scrdp; - u32 tx_desc; - u32 sctdp; - u32 sftdp; -}; - -static struct sdma_regs sdma_regs[2]; - -#define SDMA_REGS_INIT(s, reg_base) { \ - (s)->sdc = (reg_base) + SDMA_SDC; \ - (s)->sdcm = (reg_base) + SDMA_SDCM; \ - (s)->rx_desc = (reg_base) + SDMA_RX_DESC; \ - (s)->rx_buf_ptr = (reg_base) + SDMA_RX_BUF_PTR; \ - (s)->scrdp = (reg_base) + SDMA_SCRDP; \ - (s)->tx_desc = (reg_base) + SDMA_TX_DESC; \ - (s)->sctdp = (reg_base) + SDMA_SCTDP; \ - (s)->sftdp = (reg_base) + SDMA_SFTDP; \ -} - -static u32 mpsc_base[2] = { MV64x60_MPSC_0_OFFSET, MV64x60_MPSC_1_OFFSET }; - -struct mv64x60_rx_desc { - u16 bufsize; - u16 bytecnt; - u32 cmd_stat; - u32 next_desc_ptr; - u32 buffer; -}; - -struct mv64x60_tx_desc { - u16 bytecnt; - u16 shadow; - u32 cmd_stat; - u32 next_desc_ptr; - u32 buffer; -}; - -#define MAX_RESET_WAIT 10000 -#define MAX_TX_WAIT 10000 - -#define RX_NUM_DESC 2 -#define TX_NUM_DESC 2 - -#define RX_BUF_SIZE 32 -#define TX_BUF_SIZE 32 - -static struct mv64x60_rx_desc rd[2][RX_NUM_DESC] __attribute__ ((aligned(32))); -static struct mv64x60_tx_desc td[2][TX_NUM_DESC] __attribute__ ((aligned(32))); - -static char rx_buf[2][RX_NUM_DESC * RX_BUF_SIZE] __attribute__ ((aligned(32))); -static char tx_buf[2][TX_NUM_DESC * TX_BUF_SIZE] __attribute__ ((aligned(32))); - -static int cur_rd[2] = { 0, 0 }; -static int cur_td[2] = { 0, 0 }; - -static char chan_initialized[2] = { 0, 0 }; - - -#define RX_INIT_RDP(rdp) { \ - (rdp)->bufsize = 2; \ - (rdp)->bytecnt = 0; \ - (rdp)->cmd_stat = SDMA_DESC_CMDSTAT_L | SDMA_DESC_CMDSTAT_F | \ - SDMA_DESC_CMDSTAT_O; \ -} - -#ifdef CONFIG_MV64360 -static u32 cpu2mem_tab[MV64x60_CPU2MEM_WINDOWS][2] = { - { MV64x60_CPU2MEM_0_BASE, MV64x60_CPU2MEM_0_SIZE }, - { MV64x60_CPU2MEM_1_BASE, MV64x60_CPU2MEM_1_SIZE }, - { MV64x60_CPU2MEM_2_BASE, MV64x60_CPU2MEM_2_SIZE }, - { MV64x60_CPU2MEM_3_BASE, MV64x60_CPU2MEM_3_SIZE } -}; - -static u32 com2mem_tab[MV64x60_CPU2MEM_WINDOWS][2] = { - { MV64360_MPSC2MEM_0_BASE, MV64360_MPSC2MEM_0_SIZE }, - { MV64360_MPSC2MEM_1_BASE, MV64360_MPSC2MEM_1_SIZE }, - { MV64360_MPSC2MEM_2_BASE, MV64360_MPSC2MEM_2_SIZE }, - { MV64360_MPSC2MEM_3_BASE, MV64360_MPSC2MEM_3_SIZE } -}; - -static u32 dram_selects[MV64x60_CPU2MEM_WINDOWS] = { 0xe, 0xd, 0xb, 0x7 }; -#endif - -unsigned long -serial_init(int chan, void *ignored) -{ - u32 mpsc_routing_base, sdma_base, brg_bcr, cdv; - int i; - - chan = (chan == 1); /* default to chan 0 if anything but 1 */ - - if (chan_initialized[chan]) - return chan; - - chan_initialized[chan] = 1; - - if (chan == 0) { - sdma_base = MV64x60_SDMA_0_OFFSET; - brg_bcr = MV64x60_BRG_0_OFFSET + BRG_BCR; - SDMA_REGS_INIT(&sdma_regs[0], MV64x60_SDMA_0_OFFSET); - } else { - sdma_base = MV64x60_SDMA_1_OFFSET; - brg_bcr = MV64x60_BRG_1_OFFSET + BRG_BCR; - SDMA_REGS_INIT(&sdma_regs[0], MV64x60_SDMA_1_OFFSET); - } - - mpsc_routing_base = MV64x60_MPSC_ROUTING_OFFSET; - - stop_dma(chan); - - /* Set up ring buffers */ - for (i=0; i<RX_NUM_DESC; i++) { - RX_INIT_RDP(&rd[chan][i]); - rd[chan][i].buffer = (u32)&rx_buf[chan][i * RX_BUF_SIZE]; - rd[chan][i].next_desc_ptr = (u32)&rd[chan][i+1]; - } - rd[chan][RX_NUM_DESC - 1].next_desc_ptr = (u32)&rd[chan][0]; - - for (i=0; i<TX_NUM_DESC; i++) { - td[chan][i].bytecnt = 0; - td[chan][i].shadow = 0; - td[chan][i].buffer = (u32)&tx_buf[chan][i * TX_BUF_SIZE]; - td[chan][i].cmd_stat = SDMA_DESC_CMDSTAT_F|SDMA_DESC_CMDSTAT_L; - td[chan][i].next_desc_ptr = (u32)&td[chan][i+1]; - } - td[chan][TX_NUM_DESC - 1].next_desc_ptr = (u32)&td[chan][0]; - - /* Set MPSC Routing */ - out_le32(mv64x60_base + mpsc_routing_base + MPSC_MRR, 0x3ffffe38); - -#ifdef CONFIG_GT64260 - out_le32(mv64x60_base + GT64260_MPP_SERIAL_PORTS_MULTIPLEX, 0x00001102); -#else /* Must be MV64360 or MV64460 */ - { - u32 enables, prot_bits, v; - - /* Set up comm unit to memory mapping windows */ - /* Note: Assumes MV64x60_CPU2MEM_WINDOWS == 4 */ - - enables = in_le32(mv64x60_base + MV64360_CPU_BAR_ENABLE) & 0xf; - prot_bits = 0; - - for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) { - if (!(enables & (1 << i))) { - v = in_le32(mv64x60_base + cpu2mem_tab[i][0]); - v = ((v & 0xffff) << 16) | (dram_selects[i] << 8); - out_le32(mv64x60_base + com2mem_tab[i][0], v); - - v = in_le32(mv64x60_base + cpu2mem_tab[i][1]); - v = (v & 0xffff) << 16; - out_le32(mv64x60_base + com2mem_tab[i][1], v); - - prot_bits |= (0x3 << (i << 1)); /* r/w access */ - } - } - - out_le32(mv64x60_base + MV64360_MPSC_0_REMAP, 0); - out_le32(mv64x60_base + MV64360_MPSC_1_REMAP, 0); - out_le32(mv64x60_base + MV64360_MPSC2MEM_ACC_PROT_0, prot_bits); - out_le32(mv64x60_base + MV64360_MPSC2MEM_ACC_PROT_1, prot_bits); - out_le32(mv64x60_base + MV64360_MPSC2MEM_BAR_ENABLE, enables); - } -#endif - - /* MPSC 0/1 Rx & Tx get clocks BRG0/1 */ - out_le32(mv64x60_base + mpsc_routing_base + MPSC_RCRR, 0x00000100); - out_le32(mv64x60_base + mpsc_routing_base + MPSC_TCRR, 0x00000100); - - /* clear pending interrupts */ - out_le32(mv64x60_base + MV64x60_SDMA_INTR_OFFSET + SDMA_INTR_MASK, 0); - - out_le32(mv64x60_base + SDMA_SCRDP + sdma_base, (int)&rd[chan][0]); - out_le32(mv64x60_base + SDMA_SCTDP + sdma_base, - (int)&td[chan][TX_NUM_DESC - 1]); - out_le32(mv64x60_base + SDMA_SFTDP + sdma_base, - (int)&td[chan][TX_NUM_DESC - 1]); - - out_le32(mv64x60_base + SDMA_SDC + sdma_base, - SDMA_SDC_RFT | SDMA_SDC_SFM | SDMA_SDC_BLMR | SDMA_SDC_BLMT | - (3 << 12)); - - cdv = ((mv64x60_mpsc_clk_freq/(32*mv64x60_console_baud))-1); - out_le32(mv64x60_base + brg_bcr, - ((mv64x60_mpsc_clk_src << 18) | (1 << 16) | cdv)); - - /* Put MPSC into UART mode, no null modem, 16x clock mode */ - out_le32(mv64x60_base + MPSC_MMCRL + mpsc_base[chan], 0x000004c4); - out_le32(mv64x60_base + MPSC_MMCRH + mpsc_base[chan], 0x04400400); - - out_le32(mv64x60_base + MPSC_CHR_1 + mpsc_base[chan], 0); - out_le32(mv64x60_base + MPSC_CHR_9 + mpsc_base[chan], 0); - out_le32(mv64x60_base + MPSC_CHR_10 + mpsc_base[chan], 0); - out_le32(mv64x60_base + MPSC_CHR_3 + mpsc_base[chan], 4); - out_le32(mv64x60_base + MPSC_CHR_4 + mpsc_base[chan], 0); - out_le32(mv64x60_base + MPSC_CHR_5 + mpsc_base[chan], 0); - out_le32(mv64x60_base + MPSC_CHR_6 + mpsc_base[chan], 0); - out_le32(mv64x60_base + MPSC_CHR_7 + mpsc_base[chan], 0); - out_le32(mv64x60_base + MPSC_CHR_8 + mpsc_base[chan], 0); - - /* 8 data bits, 1 stop bit */ - out_le32(mv64x60_base + MPSC_MPCR + mpsc_base[chan], (3 << 12)); - out_le32(mv64x60_base + SDMA_SDCM + sdma_base, SDMA_SDCM_ERD); - out_le32(mv64x60_base + MPSC_CHR_2 + mpsc_base[chan], MPSC_CHR_2_EH); - - udelay(100); - - return chan; -} - -static void -stop_dma(int chan) -{ - int i; - - /* Abort MPSC Rx (aborting Tx messes things up) */ - out_le32(mv64x60_base + MPSC_CHR_2 + mpsc_base[chan], MPSC_CHR_2_RA); - - /* Abort SDMA Rx, Tx */ - out_le32(mv64x60_base + sdma_regs[chan].sdcm, - SDMA_SDCM_AR | SDMA_SDCM_STD); - - for (i=0; i<MAX_RESET_WAIT; i++) { - if ((in_le32(mv64x60_base + sdma_regs[chan].sdcm) & - (SDMA_SDCM_AR | SDMA_SDCM_AT)) == 0) - break; - - udelay(100); - } -} - -static int -wait_for_ownership(int chan) -{ - int i; - - for (i=0; i<MAX_TX_WAIT; i++) { - if ((in_le32(mv64x60_base + sdma_regs[chan].sdcm) & - SDMA_SDCM_TXD) == 0) - break; - - udelay(1000); - } - - return (i < MAX_TX_WAIT); -} - -void -serial_putc(unsigned long com_port, unsigned char c) -{ - struct mv64x60_tx_desc *tdp; - - if (wait_for_ownership(com_port) == 0) - return; - - tdp = &td[com_port][cur_td[com_port]]; - if (++cur_td[com_port] >= TX_NUM_DESC) - cur_td[com_port] = 0; - - *(unchar *)(tdp->buffer ^ 7) = c; - tdp->bytecnt = 1; - tdp->shadow = 1; - tdp->cmd_stat = SDMA_DESC_CMDSTAT_L | SDMA_DESC_CMDSTAT_F | - SDMA_DESC_CMDSTAT_O; - - out_le32(mv64x60_base + sdma_regs[com_port].sctdp, (int)tdp); - out_le32(mv64x60_base + sdma_regs[com_port].sftdp, (int)tdp); - out_le32(mv64x60_base + sdma_regs[com_port].sdcm, - in_le32(mv64x60_base + sdma_regs[com_port].sdcm) | - SDMA_SDCM_TXD); -} - -unsigned char -serial_getc(unsigned long com_port) -{ - struct mv64x60_rx_desc *rdp; - unchar c = '\0'; - - rdp = &rd[com_port][cur_rd[com_port]]; - - if ((rdp->cmd_stat & (SDMA_DESC_CMDSTAT_O|SDMA_DESC_CMDSTAT_ES)) == 0) { - c = *(unchar *)(rdp->buffer ^ 7); - RX_INIT_RDP(rdp); - if (++cur_rd[com_port] >= RX_NUM_DESC) - cur_rd[com_port] = 0; - } - - return c; -} - -int -serial_tstc(unsigned long com_port) -{ - struct mv64x60_rx_desc *rdp; - int loop_count = 0; - int rc = 0; - - rdp = &rd[com_port][cur_rd[com_port]]; - - /* Go through rcv descs until empty looking for one with data (no error)*/ - while (((rdp->cmd_stat & SDMA_DESC_CMDSTAT_O) == 0) && - (loop_count++ < RX_NUM_DESC)) { - - /* If there was an error, reinit the desc & continue */ - if ((rdp->cmd_stat & SDMA_DESC_CMDSTAT_ES) != 0) { - RX_INIT_RDP(rdp); - if (++cur_rd[com_port] >= RX_NUM_DESC) - cur_rd[com_port] = 0; - rdp = (struct mv64x60_rx_desc *)rdp->next_desc_ptr; - } else { - rc = 1; - break; - } - } - - return rc; -} - -void -serial_close(unsigned long com_port) -{ - stop_dma(com_port); -} diff --git a/arch/ppc/boot/simple/openbios.c b/arch/ppc/boot/simple/openbios.c deleted file mode 100644 index 6ff2701598f2..000000000000 --- a/arch/ppc/boot/simple/openbios.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * Copyright (c) 2005 DENX Software Engineering - * Stefan Roese <sr@denx.de> - * - * Based on original work by - * 2005 (c) SYSGO AG - g.jaeger@sysgo.com - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <asm/ppcboot.h> -#include <asm/ibm4xx.h> -#include <asm/reg.h> -#ifdef CONFIG_40x -#include <asm/io.h> -#endif - -#if defined(CONFIG_BUBINGA) -#define BOARD_INFO_VECTOR 0xFFF80B50 /* openbios 1.19 moved this vector down - armin */ -#else -#define BOARD_INFO_VECTOR 0xFFFE0B50 -#endif - -#ifdef CONFIG_40x -/* Supply a default Ethernet address for those eval boards that don't - * ship with one. This is an address from the MBX board I have, so - * it is unlikely you will find it on your network. - */ -static ushort def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 }; - -extern unsigned long timebase_period_ns; -#endif /* CONFIG_40x */ - -extern unsigned long decompress_kernel(unsigned long load_addr, int num_words, - unsigned long cksum); - -/* We need to make sure that this is before the images to ensure - * that it's in a mapped location. */ -bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot"))); -bd_t *hold_residual = &hold_resid_buf; - -typedef struct openbios_board_info { - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[30]; /* Version of the IBM ROM */ - unsigned int bi_memsize; /* DRAM installed, in bytes */ -#ifdef CONFIG_405EP - unsigned char bi_enetaddr[2][6]; /* Local Ethernet MAC address */ -#else /* CONFIG_405EP */ - unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */ -#endif /* CONFIG_405EP */ - unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ - unsigned int bi_intfreq; /* Processor speed, in Hz */ - unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ -#ifdef CONFIG_405EP - unsigned int bi_opb_busfreq; /* OPB Bus speed, in Hz */ - unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */ -#endif /* CONFIG_405EP */ -} openbios_bd_t; - -void * -load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, - void *ign1, void *ign2) -{ -#ifdef CONFIG_40x - openbios_bd_t *openbios_bd = NULL; - openbios_bd_t *(*get_board_info)(void) = - (openbios_bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR); - - /* - * On 40x platforms we not only need the MAC-addresses, but also the - * clocks and memsize. Now try to get all values using the OpenBIOS - * "get_board_info()" callback. - */ - if ((openbios_bd = get_board_info()) != NULL) { - /* - * Copy bd_info from OpenBIOS struct into U-Boot struct - * used by kernel - */ - hold_residual->bi_memsize = openbios_bd->bi_memsize; - hold_residual->bi_intfreq = openbios_bd->bi_intfreq; - hold_residual->bi_busfreq = openbios_bd->bi_busfreq; - hold_residual->bi_pci_busfreq = openbios_bd->bi_pci_busfreq; - memcpy(hold_residual->bi_pci_enetaddr, openbios_bd->bi_pci_enetaddr, 6); -#ifdef CONFIG_405EP - memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr[0], 6); - memcpy(hold_residual->bi_enet1addr, openbios_bd->bi_enetaddr[1], 6); - hold_residual->bi_opbfreq = openbios_bd->bi_opb_busfreq; - hold_residual->bi_procfreq = openbios_bd->bi_pllouta_freq; -#else /* CONFIG_405EP */ - memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr, 6); -#endif /* CONFIG_405EP */ - } else { - /* Hmmm...better try to stuff some defaults. - */ - hold_residual->bi_memsize = 16 * 1024 * 1024; - hold_residual->bi_intfreq = 200000000; - hold_residual->bi_busfreq = 100000000; - hold_residual->bi_pci_busfreq = 66666666; - - /* - * Only supply one mac-address in this fallback - */ - memcpy(hold_residual->bi_enetaddr, (void *)def_enet_addr, 6); -#ifdef CONFIG_405EP - hold_residual->bi_opbfreq = 50000000; - hold_residual->bi_procfreq = 200000000; -#endif /* CONFIG_405EP */ - } - - timebase_period_ns = 1000000000 / hold_residual->bi_intfreq; -#endif /* CONFIG_40x */ - -#ifdef CONFIG_440GP - /* simply copy the MAC addresses */ - memcpy(hold_residual->bi_enetaddr, (char *)OPENBIOS_MAC_BASE, 6); - memcpy(hold_residual->bi_enet1addr, (char *)(OPENBIOS_MAC_BASE+OPENBIOS_MAC_OFFSET), 6); -#endif /* CONFIG_440GP */ - - decompress_kernel(load_addr, num_words, cksum); - - return (void *)hold_residual; -} diff --git a/arch/ppc/boot/simple/pci.c b/arch/ppc/boot/simple/pci.c deleted file mode 100644 index b0f673c8b7d9..000000000000 --- a/arch/ppc/boot/simple/pci.c +++ /dev/null @@ -1,274 +0,0 @@ -/* Stand alone funtions for QSpan Tundra support. - */ -#include <linux/types.h> -#include <linux/pci.h> -#include <asm/mpc8xx.h> - -extern void puthex(unsigned long val); -extern void puts(const char *); - -/* To map PCI devices, you first write 0xffffffff into the device - * base address registers. When the register is read back, the - * number of most significant '1' bits describes the amount of address - * space needed for mapping. If the most significant bit is not set, - * either the device does not use that address register, or it has - * a fixed address that we can't change. After the address is assigned, - * the command register has to be written to enable the card. - */ -typedef struct { - u_char pci_bus; - u_char pci_devfn; - ushort pci_command; - uint pci_addrs[6]; -} pci_map_t; - -/* We should probably dynamically allocate these structures. -*/ -#define MAX_PCI_DEVS 32 -int pci_dev_cnt; -pci_map_t pci_map[MAX_PCI_DEVS]; - -void pci_conf_write(int bus, int device, int func, int reg, uint writeval); -void pci_conf_read(int bus, int device, int func, int reg, void *readval); -void probe_addresses(int bus, int devfn); -void map_pci_addrs(void); - -extern int -qs_pci_read_config_byte(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned char *val); -extern int -qs_pci_read_config_word(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned short *val); -extern int -qs_pci_read_config_dword(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned int *val); -extern int -qs_pci_write_config_byte(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned char val); -extern int -qs_pci_write_config_word(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned short val); -extern int -qs_pci_write_config_dword(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned int val); - - -/* This is a really stripped version of PCI bus scan. All we are - * looking for are devices that exist. - */ -void -pci_scanner(int addr_probe) -{ - unsigned int devfn, l, class, bus_number; - unsigned char hdr_type, is_multi; - - is_multi = 0; - bus_number = 0; - for (devfn = 0; devfn < 0xff; ++devfn) { - /* The device numbers are comprised of upper 5 bits of - * device number and lower 3 bits of multi-function number. - */ - if ((devfn & 7) && !is_multi) { - /* Don't scan multifunction addresses if this is - * not a multifunction device. - */ - continue; - } - - /* Read the header to determine card type. - */ - qs_pci_read_config_byte(bus_number, devfn, PCI_HEADER_TYPE, - &hdr_type); - - /* If this is a base device number, check the header to - * determine if it is mulifunction. - */ - if ((devfn & 7) == 0) - is_multi = hdr_type & 0x80; - - /* Check to see if the board is really in the slot. - */ - qs_pci_read_config_dword(bus_number, devfn, PCI_VENDOR_ID, &l); - /* some broken boards return 0 if a slot is empty: */ - if (l == 0xffffffff || l == 0x00000000 || l == 0x0000ffff || - l == 0xffff0000) { - /* Nothing there. - */ - is_multi = 0; - continue; - } - - /* If we are not performing an address probe, - * just simply print out some information. - */ - if (!addr_probe) { - qs_pci_read_config_dword(bus_number, devfn, - PCI_CLASS_REVISION, &class); - - class >>= 8; /* upper 3 bytes */ - -#if 0 - printf("Found (%3d:%d): vendor 0x%04x, device 0x%04x, class 0x%06x\n", - (devfn >> 3), (devfn & 7), - (l & 0xffff), (l >> 16) & 0xffff, class); -#else - puts("Found ("); puthex(devfn >> 3); - puts(":"); puthex(devfn & 7); - puts("): vendor "); puthex(l & 0xffff); - puts(", device "); puthex((l >> 16) & 0xffff); - puts(", class "); puthex(class); puts("\n"); -#endif - } - else { - /* If this is a "normal" device, build address list. - */ - if ((hdr_type & 0x7f) == PCI_HEADER_TYPE_NORMAL) - probe_addresses(bus_number, devfn); - } - } - - /* Now map the boards. - */ - if (addr_probe) - map_pci_addrs(); -} - -/* Probe addresses for the specified device. This is a destructive - * operation because it writes the registers. - */ -void -probe_addresses(bus, devfn) -{ - int i; - uint pciaddr; - ushort pcicmd; - pci_map_t *pm; - - if (pci_dev_cnt >= MAX_PCI_DEVS) { - puts("Too many PCI devices\n"); - return; - } - - pm = &pci_map[pci_dev_cnt++]; - - pm->pci_bus = bus; - pm->pci_devfn = devfn; - - for (i=0; i<6; i++) { - qs_pci_write_config_dword(bus, devfn, PCI_BASE_ADDRESS_0 + (i * 4), -1); - qs_pci_read_config_dword(bus, devfn, PCI_BASE_ADDRESS_0 + (i * 4), - &pciaddr); - pm->pci_addrs[i] = pciaddr; - qs_pci_read_config_word(bus, devfn, PCI_COMMAND, &pcicmd); - pm->pci_command = pcicmd; - } -} - -/* Map the cards into the PCI space. The PCI has separate memory - * and I/O spaces. In addition, some memory devices require mapping - * below 1M. The least significant 4 bits of the address register - * provide information. If this is an I/O device, only the LS bit - * is used to indicate that, so I/O devices can be mapped to a two byte - * boundard. Memory addresses can be mapped to a 32 byte boundary. - * The QSpan implementations usually have a 1Gbyte space for each - * memory and I/O spaces. - * - * This isn't a terribly fancy algorithm. I just map the spaces from - * the top starting with the largest address space. When finished, - * the registers are written and the card enabled. - * - * While the Tundra can map a large address space on most boards, we - * need to be careful because it may overlap other devices (like IMMR). - */ -#define MEMORY_SPACE_SIZE 0x20000000 -#define IO_SPACE_SIZE 0x20000000 - -void -map_pci_addrs() -{ - uint pci_mem_top, pci_mem_low; - uint pci_io_top; - uint addr_mask, reg_addr, space; - int i, j; - pci_map_t *pm; - - pci_mem_top = MEMORY_SPACE_SIZE; - pci_io_top = IO_SPACE_SIZE; - pci_mem_low = (1 * 1024 * 1024); /* Below one meg addresses */ - - /* We can't map anything more than the maximum space, but test - * for it anyway to catch devices out of range. - */ - addr_mask = 0x80000000; - - do { - space = (~addr_mask) + 1; /* Size of the space */ - for (i=0; i<pci_dev_cnt; i++) { - pm = &pci_map[i]; - for (j=0; j<6; j++) { - /* If the MS bit is not set, this has either - * already been mapped, or is not used. - */ - reg_addr = pm->pci_addrs[j]; - if ((reg_addr & 0x80000000) == 0) - continue; - if (reg_addr & PCI_BASE_ADDRESS_SPACE_IO) { - if ((reg_addr & PCI_BASE_ADDRESS_IO_MASK) != addr_mask) - continue; - if (pci_io_top < space) { - puts("Out of PCI I/O space\n"); - } - else { - pci_io_top -= space; - pm->pci_addrs[j] = pci_io_top; - pm->pci_command |= PCI_COMMAND_IO; - } - } - else { - if ((reg_addr & PCI_BASE_ADDRESS_MEM_MASK) != addr_mask) - continue; - - /* Memory space. Test if below 1M. - */ - if (reg_addr & PCI_BASE_ADDRESS_MEM_TYPE_1M) { - if (pci_mem_low < space) { - puts("Out of PCI 1M space\n"); - } - else { - pci_mem_low -= space; - pm->pci_addrs[j] = pci_mem_low; - } - } - else { - if (pci_mem_top < space) { - puts("Out of PCI Mem space\n"); - } - else { - pci_mem_top -= space; - pm->pci_addrs[j] = pci_mem_top; - } - } - pm->pci_command |= PCI_COMMAND_MEMORY; - } - } - } - addr_mask >>= 1; - addr_mask |= 0x80000000; - } while (addr_mask != 0xfffffffe); - - /* Now, run the list one more time and map everything. - */ - for (i=0; i<pci_dev_cnt; i++) { - pm = &pci_map[i]; - for (j=0; j<6; j++) { - qs_pci_write_config_dword(pm->pci_bus, pm->pci_devfn, - PCI_BASE_ADDRESS_0 + (j * 4), pm->pci_addrs[j]); - } - - /* Enable memory or address mapping. - */ - qs_pci_write_config_word(pm->pci_bus, pm->pci_devfn, PCI_COMMAND, - pm->pci_command); - } -} - diff --git a/arch/ppc/boot/simple/pibs.c b/arch/ppc/boot/simple/pibs.c deleted file mode 100644 index f39d01e0619d..000000000000 --- a/arch/ppc/boot/simple/pibs.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * 2004-2005 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <linux/ctype.h> -#include <asm/ppcboot.h> -#include <asm/ibm4xx.h> - -extern unsigned long decompress_kernel(unsigned long load_addr, int num_words, - unsigned long cksum); - -/* We need to make sure that this is before the images to ensure - * that it's in a mapped location. - Tom */ -bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot"))); -bd_t *hold_residual = &hold_resid_buf; - -/* String functions lifted from lib/vsprintf.c and lib/ctype.c */ -unsigned char _ctype[] = { -_C,_C,_C,_C,_C,_C,_C,_C, /* 0-7 */ -_C,_C|_S,_C|_S,_C|_S,_C|_S,_C|_S,_C,_C, /* 8-15 */ -_C,_C,_C,_C,_C,_C,_C,_C, /* 16-23 */ -_C,_C,_C,_C,_C,_C,_C,_C, /* 24-31 */ -_S|_SP,_P,_P,_P,_P,_P,_P,_P, /* 32-39 */ -_P,_P,_P,_P,_P,_P,_P,_P, /* 40-47 */ -_D,_D,_D,_D,_D,_D,_D,_D, /* 48-55 */ -_D,_D,_P,_P,_P,_P,_P,_P, /* 56-63 */ -_P,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U, /* 64-71 */ -_U,_U,_U,_U,_U,_U,_U,_U, /* 72-79 */ -_U,_U,_U,_U,_U,_U,_U,_U, /* 80-87 */ -_U,_U,_U,_P,_P,_P,_P,_P, /* 88-95 */ -_P,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L, /* 96-103 */ -_L,_L,_L,_L,_L,_L,_L,_L, /* 104-111 */ -_L,_L,_L,_L,_L,_L,_L,_L, /* 112-119 */ -_L,_L,_L,_P,_P,_P,_P,_C, /* 120-127 */ -0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 128-143 */ -0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 144-159 */ -_S|_SP,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P, /* 160-175 */ -_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P, /* 176-191 */ -_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U, /* 192-207 */ -_U,_U,_U,_U,_U,_U,_U,_P,_U,_U,_U,_U,_U,_U,_U,_L, /* 208-223 */ -_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L, /* 224-239 */ -_L,_L,_L,_L,_L,_L,_L,_P,_L,_L,_L,_L,_L,_L,_L,_L}; /* 240-255 */ - -/** - * simple_strtoull - convert a string to an unsigned long long - * @cp: The start of the string - * @endp: A pointer to the end of the parsed string will be placed here - * @base: The number base to use - */ -unsigned long long simple_strtoull(const char *cp,char **endp,unsigned int base) -{ - unsigned long long result = 0,value; - - if (!base) { - base = 10; - if (*cp == '0') { - base = 8; - cp++; - if ((toupper(*cp) == 'X') && isxdigit(cp[1])) { - cp++; - base = 16; - } - } - } else if (base == 16) { - if (cp[0] == '0' && toupper(cp[1]) == 'X') - cp += 2; - } - while (isxdigit(*cp) && (value = isdigit(*cp) ? *cp-'0' : (islower(*cp) - ? toupper(*cp) : *cp)-'A'+10) < base) { - result = result*base + value; - cp++; - } - if (endp) - *endp = (char *)cp; - return result; -} - -void * -load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, - void *ign1, void *ign2) -{ - unsigned long long mac64; - - decompress_kernel(load_addr, num_words, cksum); - - mac64 = simple_strtoull((char *)PIBS_MAC_BASE, 0, 16); - memcpy(hold_residual->bi_enetaddr, (char *)&mac64+2, 6); -#if defined(CONFIG_440GX) || defined(CONFIG_440EP) - mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET), 0, 16); - memcpy(hold_residual->bi_enet1addr, (char *)&mac64+2, 6); -#endif -#ifdef CONFIG_440GX - mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*2), 0, 16); - memcpy(hold_residual->bi_enet2addr, (char *)&mac64+2, 6); - mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*3), 0, 16); - memcpy(hold_residual->bi_enet3addr, (char *)&mac64+2, 6); -#endif - return (void *)hold_residual; -} diff --git a/arch/ppc/boot/simple/prepmap.c b/arch/ppc/boot/simple/prepmap.c deleted file mode 100644 index c871a4db6e8c..000000000000 --- a/arch/ppc/boot/simple/prepmap.c +++ /dev/null @@ -1,12 +0,0 @@ -/* - * 2004 (C) IBM. This file is licensed under the terms of the GNU General - * Public License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <nonstdio.h> - -void board_isa_init(void) -{ - ISA_init(0x80000000); -} diff --git a/arch/ppc/boot/simple/qspan_pci.c b/arch/ppc/boot/simple/qspan_pci.c deleted file mode 100644 index d2966d032a4c..000000000000 --- a/arch/ppc/boot/simple/qspan_pci.c +++ /dev/null @@ -1,269 +0,0 @@ -/* - * LinuxPPC arch/ppc/kernel/qspan_pci.c Dan Malek (dmalek@jlc.net) - * - * QSpan Motorola bus to PCI bridge. The config address register - * is located 0x500 from the base of the bridge control/status registers. - * The data register is located at 0x504. - * This is a two step operation. First, the address register is written, - * then the data register is read/written as required. - * I don't know what to do about interrupts (yet). - */ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <asm/mpc8xx.h> - -/* - * When reading the configuration space, if something does not respond - * the bus times out and we get a machine check interrupt. So, the - * good ol' exception tables come to mind to trap it and return some - * value. - * - * On an error we just return a -1, since that is what the caller wants - * returned if nothing is present. I copied this from __get_user_asm, - * with the only difference of returning -1 instead of EFAULT. - * There is an associated hack in the machine check trap code. - * - * The QSPAN is also a big endian device, that is it makes the PCI - * look big endian to us. This presents a problem for the Linux PCI - * functions, which assume little endian. For example, we see the - * first 32-bit word like this: - * ------------------------ - * | Device ID | Vendor ID | - * ------------------------ - * If we read/write as a double word, that's OK. But in our world, - * when read as a word, device ID is at location 0, not location 2 as - * the little endian PCI would believe. We have to switch bits in - * the PCI addresses given to us to get the data to/from the correct - * byte lanes. - * - * The QSPAN only supports 4 bits of "slot" in the dev_fn instead of 5. - * It always forces the MS bit to zero. Therefore, dev_fn values - * greater than 128 are returned as "no device found" errors. - * - * The QSPAN can only perform long word (32-bit) configuration cycles. - * The "offset" must have the two LS bits set to zero. Read operations - * require we read the entire word and then sort out what should be - * returned. Write operations other than long word require that we - * read the long word, update the proper word or byte, then write the - * entire long word back. - * - * PCI Bridge hack. We assume (correctly) that bus 0 is the primary - * PCI bus from the QSPAN. If we are called with a bus number other - * than zero, we create a Type 1 configuration access that a downstream - * PCI bridge will interpret. - */ - -#define __get_pci_config(x, addr, op) \ - __asm__ __volatile__( \ - "1: "op" %0,0(%1)\n" \ - " eieio\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,-1\n" \ - " b 2b\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 1b,3b\n" \ - ".text" \ - : "=r"(x) : "r"(addr)) - -#define QS_CONFIG_ADDR ((volatile uint *)(PCI_CSR_ADDR + 0x500)) -#define QS_CONFIG_DATA ((volatile uint *)(PCI_CSR_ADDR + 0x504)) - -#define mk_config_addr(bus, dev, offset) \ - (((bus)<<16) | ((dev)<<8) | (offset & 0xfc)) - -#define mk_config_type1(bus, dev, offset) \ - mk_config_addr(bus, dev, offset) | 1; - -/* Initialize the QSpan device registers after power up. -*/ -void -qspan_init(void) -{ - uint *qptr; - - - - qptr = (uint *)PCI_CSR_ADDR; - - /* PCI Configuration/status. Upper bits written to clear - * pending interrupt or status. Lower bits enable QSPAN as - * PCI master, enable memory and I/O cycles, and enable PCI - * parity error checking. - * IMPORTANT: The last two bits of this word enable PCI - * master cycles into the QBus. The QSpan is broken and can't - * meet the timing specs of the PQ bus for this to work. Therefore, - * if you don't have external bus arbitration, you can't use - * this function. - */ -#ifdef EXTERNAL_PQ_ARB - qptr[1] = 0xf9000147; -#else - qptr[1] = 0xf9000144; -#endif - - /* PCI Misc configuration. Set PCI latency timer resolution - * of 8 cycles, set cache size to 4 x 32. - */ - qptr[3] = 0; - - /* Set up PCI Target address mapping. Enable, Posted writes, - * 2Gbyte space (processor memory controller determines actual size). - */ - qptr[64] = 0x8f000080; - - /* Map processor 0x80000000 to PCI 0x00000000. - * Processor address bit 1 determines I/O type access (0x80000000) - * or memory type access (0xc0000000). - */ - qptr[65] = 0x80000000; - - /* Enable error logging and clear any pending error status. - */ - qptr[80] = 0x90000000; - - qptr[512] = 0x000c0003; - - /* Set up Qbus slave image. - */ - qptr[960] = 0x01000000; - qptr[961] = 0x000000d1; - qptr[964] = 0x00000000; - qptr[965] = 0x000000d1; - -} - -/* Functions to support PCI bios-like features to read/write configuration - * space. If the function fails for any reason, a -1 (0xffffffff) value - * must be returned. - */ -#define DEVICE_NOT_FOUND (-1) -#define SUCCESSFUL 0 - -int qs_pci_read_config_byte(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned char *val) -{ - uint temp; - u_char *cp; - - if ((bus > 7) || (dev_fn > 127)) { - *val = 0xff; - return DEVICE_NOT_FOUND; - } - - if (bus == 0) - *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset); - else - *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset); - __get_pci_config(temp, QS_CONFIG_DATA, "lwz"); - - offset ^= 0x03; - cp = ((u_char *)&temp) + (offset & 0x03); - *val = *cp; - return SUCCESSFUL; -} - -int qs_pci_read_config_word(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned short *val) -{ - uint temp; - ushort *sp; - - if ((bus > 7) || (dev_fn > 127)) { - *val = 0xffff; - return DEVICE_NOT_FOUND; - } - - if (bus == 0) - *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset); - else - *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset); - __get_pci_config(temp, QS_CONFIG_DATA, "lwz"); - offset ^= 0x02; - - sp = ((ushort *)&temp) + ((offset >> 1) & 1); - *val = *sp; - return SUCCESSFUL; -} - -int qs_pci_read_config_dword(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned int *val) -{ - if ((bus > 7) || (dev_fn > 127)) { - *val = 0xffffffff; - return DEVICE_NOT_FOUND; - } - if (bus == 0) - *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset); - else - *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset); - __get_pci_config(*val, QS_CONFIG_DATA, "lwz"); - return SUCCESSFUL; -} - -int qs_pci_write_config_byte(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned char val) -{ - uint temp; - u_char *cp; - - if ((bus > 7) || (dev_fn > 127)) - return DEVICE_NOT_FOUND; - - qs_pci_read_config_dword(bus, dev_fn, offset, &temp); - - offset ^= 0x03; - cp = ((u_char *)&temp) + (offset & 0x03); - *cp = val; - - if (bus == 0) - *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset); - else - *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset); - *QS_CONFIG_DATA = temp; - - return SUCCESSFUL; -} - -int qs_pci_write_config_word(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned short val) -{ - uint temp; - ushort *sp; - - if ((bus > 7) || (dev_fn > 127)) - return DEVICE_NOT_FOUND; - - qs_pci_read_config_dword(bus, dev_fn, offset, &temp); - - offset ^= 0x02; - sp = ((ushort *)&temp) + ((offset >> 1) & 1); - *sp = val; - - if (bus == 0) - *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset); - else - *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset); - *QS_CONFIG_DATA = temp; - - return SUCCESSFUL; -} - -int qs_pci_write_config_dword(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned int val) -{ - if ((bus > 7) || (dev_fn > 127)) - return DEVICE_NOT_FOUND; - - if (bus == 0) - *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset); - else - *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset); - *(unsigned int *)QS_CONFIG_DATA = val; - - return SUCCESSFUL; -} - diff --git a/arch/ppc/boot/simple/relocate.S b/arch/ppc/boot/simple/relocate.S deleted file mode 100644 index 1bbbcd2f2bcb..000000000000 --- a/arch/ppc/boot/simple/relocate.S +++ /dev/null @@ -1,213 +0,0 @@ -/* - * This is the common part of the loader relocation and initialization - * process. All of the board/processor specific initialization is - * done before we get here. - * - * Author: Tom Rini - * trini@mvista.com - * Derived from arch/ppc/boot/prep/head.S (Cort Dougan, many others). - * - * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <asm/cache.h> -#include <asm/ppc_asm.h> - -#define GETSYM(reg, sym) \ - lis reg, sym@h; ori reg, reg, sym@l - - .text - /* We get called from the early initialization code. - * Register 3 has the address where we were loaded, - * Register 4 contains any residual data passed from the - * boot rom. - */ - .globl relocate -relocate: - /* Save r3, r4 for later. - * The r8/r11 are legacy registers so I don't have to - * rewrite the code below :-). - */ - mr r8, r3 - mr r11, r4 - - /* compute the size of the whole image in words. */ - GETSYM(r4,start) - GETSYM(r5,end) - - addi r5,r5,3 /* round up */ - sub r5,r5,r4 /* end - start */ - srwi r5,r5,2 - mr r7,r5 /* Save for later use. */ - - /* - * Check if we need to relocate ourselves to the link addr or were - * we loaded there to begin with. - */ - cmpw cr0,r3,r4 - beq start_ldr /* If 0, we don't need to relocate */ - - /* Move this code somewhere safe. This is max(load + size, end) - * r8 == load address - */ - GETSYM(r4, start) - GETSYM(r5, end) - - sub r6,r5,r4 - add r6,r8,r6 /* r6 == phys(load + size) */ - - cmpw r5,r6 - bgt 1f - b 2f -1: - mr r6, r5 -2: - /* dest is in r6 */ - /* Ensure alignment --- this code is precautionary */ - addi r6,r6,4 - li r5,0x0003 - andc r6,r6,r5 - - /* Find physical address and size of do_relocate */ - GETSYM(r5, __relocate_start) - GETSYM(r4, __relocate_end) - GETSYM(r3, start) - - /* Size to copy */ - sub r4,r4,r5 - srwi r4,r4,2 - - /* Src addr to copy (= __relocate_start - start + where_loaded) */ - sub r3,r5,r3 - add r5,r8,r3 - - /* Save dest */ - mr r3, r6 - - /* Do the copy */ - mtctr r4 -3: lwz r4,0(r5) - stw r4,0(r3) - addi r3,r3,4 - addi r5,r5,4 - bdnz 3b - - GETSYM(r4, __relocate_start) - GETSYM(r5, do_relocate) - - sub r4,r5,r4 /* Get entry point for do_relocate in */ - add r6,r6,r4 /* relocated section */ - - /* This will return to the relocated do_relocate */ - mtlr r6 - b flush_instruction_cache - - .section ".relocate_code","xa" - -do_relocate: - /* We have 2 cases --- start < load, or start > load - * This determines whether we copy from the end, or the start. - * Its easier to have 2 loops than to have paramaterised - * loops. Sigh. - */ - li r6,0 /* Clear checksum */ - mtctr r7 /* Setup for a loop */ - - GETSYM(r4, start) - mr r3,r8 /* Get the load addr */ - - cmpw cr0,r4,r3 /* If we need to copy from the end, do so */ - bgt do_relocate_from_end - -do_relocate_from_start: -1: lwz r5,0(r3) /* Load and decrement */ - stw r5,0(r4) /* Store and decrement */ - addi r3,r3,4 - addi r4,r4,4 - xor r6,r6,r5 /* Update checksum */ - bdnz 1b /* Are we done? */ - b do_relocate_out /* Finished */ - -do_relocate_from_end: - GETSYM(r3, end) - slwi r4,r7,2 - add r4,r8,r4 /* Get the physical end */ -1: lwzu r5,-4(r4) - stwu r5, -4(r3) - xor r6,r6,r5 - bdnz 1b - -do_relocate_out: - GETSYM(r3,start_ldr) - mtlr r3 /* Easiest way to do an absolute jump */ -/* Some boards don't boot up with the I-cache enabled. Do that - * now because the decompress runs much faster that way. - * As a side effect, we have to ensure the data cache is not enabled - * so we can access the serial I/O without trouble. - */ - b flush_instruction_cache - - .previous - -start_ldr: -/* Clear all of BSS and set up stack for C calls */ - lis r3,__bss_start@h - ori r3,r3,__bss_start@l - lis r4,end@h - ori r4,r4,end@l - subi r3,r3,4 - subi r4,r4,4 - li r0,0 -50: stwu r0,4(r3) - cmpw cr0,r3,r4 - blt 50b -90: mr r9,r1 /* Save old stack pointer (in case it matters) */ - lis r1,.stack@h - ori r1,r1,.stack@l - addi r1,r1,4096*2 - subi r1,r1,256 - li r2,0x000F /* Mask pointer to 16-byte boundary */ - andc r1,r1,r2 - - /* - * Exec kernel loader - */ - mr r3,r8 /* Load point */ - mr r4,r7 /* Program length */ - mr r5,r6 /* Checksum */ - mr r6,r11 /* Residual data */ - mr r7,r25 /* Validated OFW interface */ - bl load_kernel - - /* - * Make sure the kernel knows we don't have things set in - * registers. -- Tom - */ - li r4,0 - li r5,0 - li r6,0 - - /* - * Start at the begining. - */ -#ifdef CONFIG_PPC_PREP - li r9,0xc - mtlr r9 - /* tell kernel we're prep, by putting 0xdeadc0de at KERNELLOAD, - * and tell the kernel to start on the 4th instruction since we - * overwrite the first 3 sometimes (which are 'nop'). - */ - lis r10,0xdeadc0de@h - ori r10,r10,0xdeadc0de@l - li r9,0 - stw r10,0(r9) -#else - li r9,0 - mtlr r9 -#endif - blr - - .comm .stack,4096*2,4 diff --git a/arch/ppc/boot/simple/rw4/ppc_40x.h b/arch/ppc/boot/simple/rw4/ppc_40x.h deleted file mode 100644 index 561fb26f5a93..000000000000 --- a/arch/ppc/boot/simple/rw4/ppc_40x.h +++ /dev/null @@ -1,664 +0,0 @@ -/*----------------------------------------------------------------------------+ -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1997 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+----------------------------------------------------------------------------*/ -/*----------------------------------------------------------------------------+ -| Author: Tony J. Cerreto -| Component: Assembler include file. -| File: ppc_40x.h -| Purpose: Include file containing PPC DCR defines. -| -| Changes: -| Date Author Comment -| --------- ------ -------------------------------------------------------- -| 01-Mar-00 tjc Created -+----------------------------------------------------------------------------*/ -/* added by linguohui*/ -#define MW -/*----------------------------------------------------------------------------+ -| PPC Special purpose registers Numbers -+----------------------------------------------------------------------------*/ -#define ccr0 0x3b3 /* core configuration reg */ -#define ctr 0x009 /* count register */ -#define ctrreg 0x009 /* count register */ -#define dbcr0 0x3f2 /* debug control register 0 */ -#define dbcr1 0x3bd /* debug control register 1 */ -#define dbsr 0x3f0 /* debug status register */ -#define dccr 0x3fa /* data cache control reg. */ -#define dcwr 0x3ba /* data cache write-thru reg */ -#define dear 0x3d5 /* data exception address reg */ -#define esr 0x3d4 /* exception syndrome register */ -#define evpr 0x3d6 /* exception vector prefix reg */ -#define iccr 0x3fb /* instruction cache cntrl re */ -#define icdbdr 0x3d3 /* instr cache dbug data reg */ -#define lrreg 0x008 /* link register */ -#define pid 0x3b1 /* process id reg */ -#define pit 0x3db /* programmable interval time */ -#define pvr 0x11f /* processor version register */ -#define sgr 0x3b9 /* storage guarded reg */ -#define sler 0x3bb /* storage little endian reg */ -#define sprg0 0x110 /* special general purpose 0 */ -#define sprg1 0x111 /* special general purpose 1 */ -#define sprg2 0x112 /* special general purpose 2 */ -#define sprg3 0x113 /* special general purpose 3 */ -#define sprg4 0x114 /* special general purpose 4 */ -#define sprg5 0x115 /* special general purpose 5 */ -#define sprg6 0x116 /* special general purpose 6 */ -#define sprg7 0x117 /* special general purpose 7 */ -#define srr0 0x01a /* save/restore register 0 */ -#define srr1 0x01b /* save/restore register 1 */ -#define srr2 0x3de /* save/restore register 2 */ -#define srr3 0x3df /* save/restore register 3 */ -#define tbhi 0x11D -#define tblo 0x11C -#define tcr 0x3da /* timer control register */ -#define tsr 0x3d8 /* timer status register */ -#define xerreg 0x001 /* fixed point exception */ -#define xer 0x001 /* fixed point exception */ -#define zpr 0x3b0 /* zone protection reg */ - -/*----------------------------------------------------------------------------+ -| Decompression Controller -+----------------------------------------------------------------------------*/ -#define kiar 0x014 /* Decompression cntl addr reg */ -#define kidr 0x015 /* Decompression cntl data reg */ -#define kitor0 0x00 /* index table origin Reg 0 */ -#define kitor1 0x01 /* index table origin Reg 1 */ -#define kitor2 0x02 /* index table origin Reg 2 */ -#define kitor3 0x03 /* index table origin Reg 3 */ -#define kaddr0 0x04 /* addr decode Definition Reg 0 */ -#define kaddr1 0x05 /* addr decode Definition Reg 1 */ -#define kconf 0x40 /* Decompression cntl config reg */ -#define kid 0x41 /* Decompression cntl id reg */ -#define kver 0x42 /* Decompression cntl ver number */ -#define kpear 0x50 /* bus error addr reg (PLB) */ -#define kbear 0x51 /* bus error addr reg (DCP-EBC) */ -#define kesr0 0x52 /* bus error status reg 0 */ - -/*----------------------------------------------------------------------------+ -| Romeo Specific Device Control Register Numbers. -+----------------------------------------------------------------------------*/ -#ifndef VESTA -#define cdbcr 0x3d7 /* cache debug cntrl reg */ - -#define a_latcnt 0x1a9 /* PLB Latency count */ -#define a_tgval 0x1ac /* tone generation value */ -#define a_plb_pr 0x1bf /* PLB priority */ - -#define cic_sel1 0x031 /* select register 1 */ -#define cic_sel2 0x032 /* select register 2 */ - -#define clkgcrst 0x122 /* chip reset register */ - -#define cp_cpmsr 0x100 /*rstatus register */ -#define cp_cpmer 0x101 /* enable register */ - -#define dcp_kiar 0x190 /* indirect address register */ -#define dcp_kidr 0x191 /* indirect data register */ - -#define hsmc_mcgr 0x1c0 /* HSMC global register */ -#define hsmc_mcbesr 0x1c1 /* bus error status register */ -#define hsmc_mcbear 0x1c2 /* bus error address register*/ -#define hsmc_mcbr0 0x1c4 /* SDRAM sub-ctrl bank reg 0 */ -#define hsmc_mccr0 0x1c5 /* SDRAM sub-ctrl ctrl reg 0 */ -#define hsmc_mcbr1 0x1c7 /* SDRAM sub-ctrl bank reg 1 */ -#define hsmc_mccr1 0x1c8 /* SDRAM sub-ctrl ctrl reg 1 */ -#define hsmc_sysr 0x1d1 /* system register */ -#define hsmc_data 0x1d2 /* data register */ -#define hsmc_mccrr 0x1d3 /* refresh register */ - -#define ocm_pbar 0x1E0 /* base address register */ - -#define plb0_pacr0 0x057 /* PLB arbiter control reg */ -#define plb1_pacr1 0x067 /* PLB arbiter control reg */ - -#define v_displb 0x157 /* set left border of display*/ -#define v_disptb 0x158 /* top border of display */ -#define v_osd_la 0x159 /* first link address for OSD*/ -#define v_ptsdlta 0x15E /* PTS delta register */ -#define v_v0base 0x16C /* base mem add for VBI-0 */ -#define v_v1base 0x16D /* base mem add for VBI-1 */ -#define v_osbase 0x16E /* base mem add for OSD data */ -#endif - -/*----------------------------------------------------------------------------+ -| Vesta Device Control Register Numbers. -+----------------------------------------------------------------------------*/ -/*----------------------------------------------------------------------------+ -| Cross bar switch. -+----------------------------------------------------------------------------*/ -#define cbs0_cr 0x010 /* CBS configuration register */ - -/*----------------------------------------------------------------------------+ -| DCR external master (DCRX). -+----------------------------------------------------------------------------*/ -#define dcrx0_icr 0x020 /* internal control register */ -#define dcrx0_isr 0x021 /* internal status register */ -#define dcrx0_ecr 0x022 /* external control register */ -#define dcrx0_esr 0x023 /* external status register */ -#define dcrx0_tar 0x024 /* target address register */ -#define dcrx0_tdr 0x025 /* target data register */ -#define dcrx0_igr 0x026 /* interrupt generation register */ -#define dcrx0_bcr 0x027 /* buffer control register */ - -/*----------------------------------------------------------------------------+ -| Chip interconnect configuration. -+----------------------------------------------------------------------------*/ -#define cic0_cr 0x030 /* CIC control register */ -#define cic0_vcr 0x033 /* video macro control reg */ -#define cic0_sel3 0x035 /* select register 3 */ - -/*----------------------------------------------------------------------------+ -| Chip interconnect configuration. -+----------------------------------------------------------------------------*/ -#define sgpo0_sgpO 0x036 /* simplified GPIO output */ -#define sgpo0_gpod 0x037 /* simplified GPIO open drain */ -#define sgpo0_gptc 0x038 /* simplified GPIO tristate cntl */ -#define sgpo0_gpi 0x039 /* simplified GPIO input */ - -/*----------------------------------------------------------------------------+ -| Universal interrupt controller. -+----------------------------------------------------------------------------*/ -#define uic0_sr 0x040 /* status register */ -#define uic0_srs 0x041 /* status register set */ -#define uic0_er 0x042 /* enable register */ -#define uic0_cr 0x043 /* critical register */ -#define uic0_pr 0x044 /* parity register */ -#define uic0_tr 0x045 /* triggering register */ -#define uic0_msr 0x046 /* masked status register */ -#define uic0_vr 0x047 /* vector register */ -#define uic0_vcr 0x048 /* enable config register */ - -/*----------------------------------------------------------------------------+ -| PLB 0 and 1. -+----------------------------------------------------------------------------*/ -#define pb0_pesr 0x054 /* PLB error status reg 0 */ -#define pb0_pesrs 0x055 /* PLB error status reg 0 set */ -#define pb0_pear 0x056 /* PLB error address reg */ - -#define pb1_pesr 0x064 /* PLB error status reg 1 */ -#define pb1_pesrs 0x065 /* PLB error status reg 1 set */ -#define pb1_pear 0x066 /* PLB error address reg */ - -/*----------------------------------------------------------------------------+ -| EBIU DCR registers. -+----------------------------------------------------------------------------*/ -#define ebiu0_brcrh0 0x070 /* bus region register 0 high */ -#define ebiu0_brcrh1 0x071 /* bus region register 1 high */ -#define ebiu0_brcrh2 0x072 /* bus region register 2 high */ -#define ebiu0_brcrh3 0x073 /* bus region register 3 high */ -#define ebiu0_brcrh4 0x074 /* bus region register 4 high */ -#define ebiu0_brcrh5 0x075 /* bus region register 5 high */ -#define ebiu0_brcrh6 0x076 /* bus region register 6 high */ -#define ebiu0_brcrh7 0x077 /* bus region register 7 high */ -#define ebiu0_brcr0 0x080 /* bus region register 0 */ -#define ebiu0_brcr1 0x081 /* bus region register 1 */ -#define ebiu0_brcr2 0x082 /* bus region register 2 */ -#define ebiu0_brcr3 0x083 /* bus region register 3 */ -#define ebiu0_brcr4 0x084 /* bus region register 4 */ -#define ebiu0_brcr5 0x085 /* bus region register 5 */ -#define ebiu0_brcr6 0x086 /* bus region register 6 */ -#define ebiu0_brcr7 0x087 /* bus region register 7 */ -#define ebiu0_bear 0x090 /* bus error address register */ -#define ebiu0_besr 0x091 /* bus error syndrome reg */ -#define ebiu0_besr0s 0x093 /* bus error syndrome reg */ -#define ebiu0_biucr 0x09a /* bus interface control reg */ - -/*----------------------------------------------------------------------------+ -| OPB bridge. -+----------------------------------------------------------------------------*/ -#define opbw0_gesr 0x0b0 /* error status reg */ -#define opbw0_gesrs 0x0b1 /* error status reg */ -#define opbw0_gear 0x0b2 /* error address reg */ - -/*----------------------------------------------------------------------------+ -| DMA. -+----------------------------------------------------------------------------*/ -#define dma0_cr0 0x0c0 /* DMA channel control reg 0 */ -#define dma0_ct0 0x0c1 /* DMA count register 0 */ -#define dma0_da0 0x0c2 /* DMA destination addr reg 0 */ -#define dma0_sa0 0x0c3 /* DMA source addr register 0 */ -#define dma0_cc0 0x0c4 /* DMA chained count 0 */ -#define dma0_cr1 0x0c8 /* DMA channel control reg 1 */ -#define dma0_ct1 0x0c9 /* DMA count register 1 */ -#define dma0_da1 0x0ca /* DMA destination addr reg 1 */ -#define dma0_sa1 0x0cb /* DMA source addr register 1 */ -#define dma0_cc1 0x0cc /* DMA chained count 1 */ -#define dma0_cr2 0x0d0 /* DMA channel control reg 2 */ -#define dma0_ct2 0x0d1 /* DMA count register 2 */ -#define dma0_da2 0x0d2 /* DMA destination addr reg 2 */ -#define dma0_sa2 0x0d3 /* DMA source addr register 2 */ -#define dma0_cc2 0x0d4 /* DMA chained count 2 */ -#define dma0_cr3 0x0d8 /* DMA channel control reg 3 */ -#define dma0_ct3 0x0d9 /* DMA count register 3 */ -#define dma0_da3 0x0da /* DMA destination addr reg 3 */ -#define dma0_sa3 0x0db /* DMA source addr register 3 */ -#define dma0_cc3 0x0dc /* DMA chained count 3 */ -#define dma0_sr 0x0e0 /* DMA status register */ -#define dma0_srs 0x0e1 /* DMA status register */ -#define dma0_s1 0x031 /* DMA select1 register */ -#define dma0_s2 0x032 /* DMA select2 register */ - -/*---------------------------------------------------------------------------+ -| Clock and power management. -+----------------------------------------------------------------------------*/ -#define cpm0_fr 0x102 /* force register */ - -/*----------------------------------------------------------------------------+ -| Serial Clock Control. -+----------------------------------------------------------------------------*/ -#define ser0_ccr 0x120 /* serial clock control register */ - -/*----------------------------------------------------------------------------+ -| Audio Clock Control. -+----------------------------------------------------------------------------*/ -#define aud0_apcr 0x121 /* audio clock ctrl register */ - -/*----------------------------------------------------------------------------+ -| DENC. -+----------------------------------------------------------------------------*/ -#define denc0_idr 0x130 /* DENC ID register */ -#define denc0_cr1 0x131 /* control register 1 */ -#define denc0_rr1 0x132 /* microvision 1 (reserved 1) */ -#define denc0_cr2 0x133 /* control register 2 */ -#define denc0_rr2 0x134 /* microvision 2 (reserved 2) */ -#define denc0_rr3 0x135 /* microvision 3 (reserved 3) */ -#define denc0_rr4 0x136 /* microvision 4 (reserved 4) */ -#define denc0_rr5 0x137 /* microvision 5 (reserved 5) */ -#define denc0_ccdr 0x138 /* closed caption data */ -#define denc0_cccr 0x139 /* closed caption control */ -#define denc0_trr 0x13A /* teletext request register */ -#define denc0_tosr 0x13B /* teletext odd field line se */ -#define denc0_tesr 0x13C /* teletext even field line s */ -#define denc0_rlsr 0x13D /* RGB rhift left register */ -#define denc0_vlsr 0x13E /* video level shift register */ -#define denc0_vsr 0x13F /* video scaling register */ - -/*----------------------------------------------------------------------------+ -| Video decoder. Suspect 0x179, 0x169, 0x16a, 0x152 (rc). -+----------------------------------------------------------------------------*/ -#define vid0_ccntl 0x140 /* control decoder operation */ -#define vid0_cmode 0x141 /* video operational mode */ -#define vid0_sstc0 0x142 /* STC high order bits 31:0 */ -#define vid0_sstc1 0x143 /* STC low order bit 32 */ -#define vid0_spts0 0x144 /* PTS high order bits 31:0 */ -#define vid0_spts1 0x145 /* PTS low order bit 32 */ -#define vid0_fifo 0x146 /* FIFO data port */ -#define vid0_fifos 0x147 /* FIFO status */ -#define vid0_cmd 0x148 /* send command to decoder */ -#define vid0_cmdd 0x149 /* port for command params */ -#define vid0_cmdst 0x14A /* command status */ -#define vid0_cmdad 0x14B /* command address */ -#define vid0_procia 0x14C /* instruction store */ -#define vid0_procid 0x14D /* data port for I_Store */ -#define vid0_osdm 0x151 /* OSD mode control */ -#define vid0_hosti 0x152 /* base interrupt register */ -#define vid0_mask 0x153 /* interrupt mask register */ -#define vid0_dispm 0x154 /* operational mode for Disp */ -#define vid0_dispd 0x155 /* setting for 'Sync' delay */ -#define vid0_vbctl 0x156 /* VBI */ -#define vid0_ttxctl 0x157 /* teletext control */ -#define vid0_disptb 0x158 /* display left/top border */ -#define vid0_osdgla 0x159 /* Graphics plane link addr */ -#define vid0_osdila 0x15A /* Image plane link addr */ -#define vid0_rbthr 0x15B /* rate buffer threshold */ -#define vid0_osdcla 0x15C /* Cursor link addr */ -#define vid0_stcca 0x15D /* STC common address */ -#define vid0_ptsctl 0x15F /* PTS Control */ -#define vid0_wprot 0x165 /* write protect for I_Store */ -#define vid0_vcqa 0x167 /* video clip queued block Ad */ -#define vid0_vcql 0x168 /* video clip queued block Le */ -#define vid0_blksz 0x169 /* block size bytes for copy op */ -#define vid0_srcad 0x16a /* copy source address bits 6-31 */ -#define vid0_udbas 0x16B /* base mem add for user data */ -#define vid0_vbibas 0x16C /* base mem add for VBI 0/1 */ -#define vid0_osdibas 0x16D /* Image plane base address */ -#define vid0_osdgbas 0x16E /* Graphic plane base address */ -#define vid0_rbbase 0x16F /* base mem add for video buf */ -#define vid0_dramad 0x170 /* DRAM address */ -#define vid0_dramdt 0x171 /* data port for DRAM access */ -#define vid0_dramcs 0x172 /* DRAM command and statusa */ -#define vid0_vcwa 0x173 /* v clip work address */ -#define vid0_vcwl 0x174 /* v clip work length */ -#define vid0_mseg0 0x175 /* segment address 0 */ -#define vid0_mseg1 0x176 /* segment address 1 */ -#define vid0_mseg2 0x177 /* segment address 2 */ -#define vid0_mseg3 0x178 /* segment address 3 */ -#define vid0_fbbase 0x179 /* frame buffer base memory */ -#define vid0_osdcbas 0x17A /* Cursor base addr */ -#define vid0_lboxtb 0x17B /* top left border */ -#define vid0_trdly 0x17C /* transparency gate delay */ -#define vid0_sbord 0x17D /* left/top small pict. bord. */ -#define vid0_zoffs 0x17E /* hor/ver zoom window */ -#define vid0_rbsz 0x17F /* rate buffer size read */ - -/*----------------------------------------------------------------------------+ -| Transport demultiplexer. -+----------------------------------------------------------------------------*/ -#define xpt0_lr 0x180 /* demux location register */ -#define xpt0_data 0x181 /* demux data register */ -#define xpt0_ir 0x182 /* demux interrupt register */ - -#define xpt0_config1 0x0000 /* configuration 1 */ -#define xpt0_control1 0x0001 /* control 1 */ -#define xpt0_festat 0x0002 /* Front-end status */ -#define xpt0_feimask 0x0003 /* Front_end interrupt Mask */ -#define xpt0_ocmcnfg 0x0004 /* OCM Address */ -#define xpt0_settapi 0x0005 /* Set TAP Interrupt */ - -#define xpt0_pcrhi 0x0010 /* PCR High */ -#define xpt0_pcrlow 0x0011 /* PCR Low */ -#define xpt0_lstchi 0x0012 /* Latched STC High */ -#define xpt0_lstclow 0x0013 /* Latched STC Low */ -#define xpt0_stchi 0x0014 /* STC High */ -#define xpt0_stclow 0x0015 /* STC Low */ -#define xpt0_pwm 0x0016 /* PWM */ -#define xpt0_pcrstct 0x0017 /* PCR-STC Threshold */ -#define xpt0_pcrstcd 0x0018 /* PCR-STC Delta */ -#define xpt0_stccomp 0x0019 /* STC Compare */ -#define xpt0_stccmpd 0x001a /* STC Compare Disarm */ - -#define xpt0_dsstat 0x0048 /* Descrambler Status */ -#define xpt0_dsimask 0x0049 /* Descrambler Interrupt Mask */ - -#define xpt0_vcchng 0x01f0 /* Video Channel Change */ -#define xpt0_acchng 0x01f1 /* Audio Channel Change */ -#define xpt0_axenable 0x01fe /* Aux PID Enables */ -#define xpt0_pcrpid 0x01ff /* PCR PID */ - -#define xpt0_config2 0x1000 /* Configuration 2 */ -#define xpt0_pbuflvl 0x1002 /* Packet Buffer Level */ -#define xpt0_intmask 0x1003 /* Interrupt Mask */ -#define xpt0_plbcnfg 0x1004 /* PLB Configuration */ - -#define xpt0_qint 0x1010 /* Queues Interrupts */ -#define xpt0_qintmsk 0x1011 /* Queues Interrupts Mask */ -#define xpt0_astatus 0x1012 /* Audio Status */ -#define xpt0_aintmask 0x1013 /* Audio Interrupt Mask */ -#define xpt0_vstatus 0x1014 /* Video Status */ -#define xpt0_vintmask 0x1015 /* Video Interrupt Mask */ - -#define xpt0_qbase 0x1020 /* Queue Base */ -#define xpt0_bucketq 0x1021 /* Bucket Queue */ -#define xpt0_qstops 0x1024 /* Queue Stops */ -#define xpt0_qresets 0x1025 /* Queue Resets */ -#define xpt0_sfchng 0x1026 /* Section Filter Change */ - -/*----------------------------------------------------------------------------+ -| Audio decoder. Suspect 0x1ad, 0x1b4, 0x1a3, 0x1a5 (read/write status) -+----------------------------------------------------------------------------*/ -#define aud0_ctrl0 0x1a0 /* control 0 */ -#define aud0_ctrl1 0x1a1 /* control 1 */ -#define aud0_ctrl2 0x1a2 /* control 2 */ -#define aud0_cmd 0x1a3 /* command register */ -#define aud0_isr 0x1a4 /* interrupt status register */ -#define aud0_imr 0x1a5 /* interrupt mask register */ -#define aud0_dsr 0x1a6 /* decoder status register */ -#define aud0_stc 0x1a7 /* system time clock */ -#define aud0_csr 0x1a8 /* channel status register */ -#define aud0_lcnt 0x1a9 /* queued address register 2 */ -#define aud0_pts 0x1aa /* presentation time stamp */ -#define aud0_tgctrl 0x1ab /* tone generation control */ -#define aud0_qlr2 0x1ac /* queued length register 2 */ -#define aud0_auxd 0x1ad /* aux data */ -#define aud0_strmid 0x1ae /* stream ID */ -#define aud0_qar 0x1af /* queued address register */ -#define aud0_dsps 0x1b0 /* DSP status */ -#define aud0_qlr 0x1b1 /* queued len address */ -#define aud0_dspc 0x1b2 /* DSP control */ -#define aud0_wlr2 0x1b3 /* working length register 2 */ -#define aud0_instd 0x1b4 /* instruction download */ -#define aud0_war 0x1b5 /* working address register */ -#define aud0_seg1 0x1b6 /* segment 1 base register */ -#define aud0_seg2 0x1b7 /* segment 2 base register */ -#define aud0_avf 0x1b9 /* audio att value front */ -#define aud0_avr 0x1ba /* audio att value rear */ -#define aud0_avc 0x1bb /* audio att value center */ -#define aud0_seg3 0x1bc /* segment 3 base register */ -#define aud0_offset 0x1bd /* offset address */ -#define aud0_wrl 0x1be /* working length register */ -#define aud0_war2 0x1bf /* working address register 2 */ - -/*----------------------------------------------------------------------------+ -| High speed memory controller 0 and 1. -+----------------------------------------------------------------------------*/ -#define hsmc0_gr 0x1e0 /* HSMC global register */ -#define hsmc0_besr 0x1e1 /* bus error status register */ -#define hsmc0_bear 0x1e2 /* bus error address register */ -#define hsmc0_br0 0x1e4 /* SDRAM sub-ctrl bank reg 0 */ -#define hsmc0_cr0 0x1e5 /* SDRAM sub-ctrl ctrl reg 0 */ -#define hsmc0_br1 0x1e7 /* SDRAM sub-ctrl bank reg 1 */ -#define hsmc0_cr1 0x1e8 /* SDRAM sub-ctrl ctrl reg 1 */ -#define hsmc0_sysr 0x1f1 /* system register */ -#define hsmc0_data 0x1f2 /* data register */ -#define hsmc0_crr 0x1f3 /* refresh register */ - -#define hsmc1_gr 0x1c0 /* HSMC global register */ -#define hsmc1_besr 0x1c1 /* bus error status register */ -#define hsmc1_bear 0x1c2 /* bus error address register */ -#define hsmc1_br0 0x1c4 /* SDRAM sub-ctrl bank reg 0 */ -#define hsmc1_cr0 0x1c5 /* SDRAM sub-ctrl ctrl reg 0 */ -#define hsmc1_br1 0x1c7 /* SDRAM sub-ctrl bank reg 1 */ -#define hsmc1_cr1 0x1c8 /* SDRAM sub-ctrl ctrl reg 1 */ -#define hsmc1_sysr 0x1d1 /* system register */ -#define hsmc1_data 0x1d2 /* data register */ -#define hsmc1_crr 0x1d3 /* refresh register */ - -/*----------------------------------------------------------------------------+ -| Machine State Register bit definitions. -+----------------------------------------------------------------------------*/ -#define msr_ape 0x00100000 -#define msr_apa 0x00080000 -#define msr_we 0x00040000 -#define msr_ce 0x00020000 -#define msr_ile 0x00010000 -#define msr_ee 0x00008000 -#define msr_pr 0x00004000 -#define msr_me 0x00001000 -#define msr_de 0x00000200 -#define msr_ir 0x00000020 -#define msr_dr 0x00000010 -#define msr_le 0x00000001 - -/*----------------------------------------------------------------------------+ -| Used during interrupt processing. -+----------------------------------------------------------------------------*/ -#define stack_reg_image_size 160 - -/*----------------------------------------------------------------------------+ -| Function prolog definition and other Metaware (EABI) defines. -+----------------------------------------------------------------------------*/ -#ifdef MW - -#define r0 0 -#define r1 1 -#define r2 2 -#define r3 3 -#define r4 4 -#define r5 5 -#define r6 6 -#define r7 7 -#define r8 8 -#define r9 9 -#define r10 10 -#define r11 11 -#define r12 12 -#define r13 13 -#define r14 14 -#define r15 15 -#define r16 16 -#define r17 17 -#define r18 18 -#define r19 19 -#define r20 20 -#define r21 21 -#define r22 22 -#define r23 23 -#define r24 24 -#define r25 25 -#define r26 26 -#define r27 27 -#define r28 28 -#define r29 29 -#define r30 30 -#define r31 31 - -#define cr0 0 -#define cr1 1 -#define cr2 2 -#define cr3 3 -#define cr4 4 -#define cr5 5 -#define cr6 6 -#define cr7 7 - -#define function_prolog(func_name) .text; \ - .align 2; \ - .globl func_name; \ - func_name: -#define function_epilog(func_name) .type func_name,@function; \ - .size func_name,.-func_name - -#define function_call(func_name) bl func_name - -#define stack_frame_min 8 -#define stack_frame_bc 0 -#define stack_frame_lr 4 -#define stack_neg_off 0 - -#endif - -/*----------------------------------------------------------------------------+ -| Function prolog definition and other DIAB (Elf) defines. -+----------------------------------------------------------------------------*/ -#ifdef ELF_DIAB - -fprolog: macro f_name - .text - .align 2 - .globl f_name -f_name: - endm - -fepilog: macro f_name - .type f_name,@function - .size f_name,.-f_name - endm - -#define function_prolog(func_name) fprolog func_name -#define function_epilog(func_name) fepilog func_name -#define function_call(func_name) bl func_name - -#define stack_frame_min 8 -#define stack_frame_bc 0 -#define stack_frame_lr 4 -#define stack_neg_off 0 - -#endif - -/*----------------------------------------------------------------------------+ -| Function prolog definition and other Xlc (XCOFF) defines. -+----------------------------------------------------------------------------*/ -#ifdef XCOFF - -.machine "403ga" - -#define r0 0 -#define r1 1 -#define r2 2 -#define r3 3 -#define r4 4 -#define r5 5 -#define r6 6 -#define r7 7 -#define r8 8 -#define r9 9 -#define r10 10 -#define r11 11 -#define r12 12 -#define r13 13 -#define r14 14 -#define r15 15 -#define r16 16 -#define r17 17 -#define r18 18 -#define r19 19 -#define r20 20 -#define r21 21 -#define r22 22 -#define r23 23 -#define r24 24 -#define r25 25 -#define r26 26 -#define r27 27 -#define r28 28 -#define r29 29 -#define r30 30 -#define r31 31 - -#define cr0 0 -#define cr1 1 -#define cr2 2 -#define cr3 3 -#define cr4 4 -#define cr5 5 -#define cr6 6 -#define cr7 7 - -#define function_prolog(func_name) .csect .func_name[PR]; \ - .globl .func_name[PR]; \ - func_name: - -#define function_epilog(func_name) .toc; \ - .csect func_name[DS]; \ - .globl func_name[DS]; \ - .long .func_name[PR]; \ - .long TOC[tc0] - -#define function_call(func_name) .extern .func_name[PR]; \ - stw r2,stack_frame_toc(r1); \ - mfspr r2,sprg0; \ - bl .func_name[PR]; \ - lwz r2,stack_frame_toc(r1) - -#define stack_frame_min 56 -#define stack_frame_bc 0 -#define stack_frame_lr 8 -#define stack_frame_toc 20 -#define stack_neg_off 276 - -#endif -#define function_prolog(func_name) .text; \ - .align 2; \ - .globl func_name; \ - func_name: -#define function_epilog(func_name) .type func_name,@function; \ - .size func_name,.-func_name - -#define function_call(func_name) bl func_name - -/*----------------------------------------------------------------------------+ -| Function prolog definition for GNU -+----------------------------------------------------------------------------*/ -#ifdef _GNU_TOOL - -#define function_prolog(func_name) .globl func_name; \ - func_name: -#define function_epilog(func_name) - -#endif diff --git a/arch/ppc/boot/simple/rw4/rw4_init.S b/arch/ppc/boot/simple/rw4/rw4_init.S deleted file mode 100644 index b1061962e46b..000000000000 --- a/arch/ppc/boot/simple/rw4/rw4_init.S +++ /dev/null @@ -1,78 +0,0 @@ -#define VESTA -#include "ppc_40x.h" -# - .align 2 - .text -# -# added by linguohui - .extern initb_ebiu0, initb_config, hdw_init_finish - .extern initb_hsmc0, initb_hsmc1, initb_cache -# end added - .globl HdwInit -# -HdwInit: -# -#-----------------------------------------------------------------------* -# If we are not executing from the FLASH get out * -#-----------------------------------------------------------------------* -# SAW keep this or comment out a la Hawthorne? -# r3 contains NIP when used with Linux -# rlwinm r28, r3, 8, 24, 31 # if MSB == 0xFF -> FLASH address -# cmpwi r28, 0xff -# bne locn01 -# -# -#------------------------------------------------------------------------ -# Init_cpu. Bank registers are setup for the IBM STB. -#------------------------------------------------------------------------ -# -# Setup processor core clock to be driven off chip. This is GPI4 bit -# twenty. Setup Open Drain, Output Select, Three-State Control, and -# Three-State Select registers. -# - - - pb0pesr = 0x054 - pb0pear = 0x056 - - mflr r30 - -#----------------------------------------------------------------------------- -# Vectors will be at 0x1F000000 -# Dummy Machine check handler just does RFI before true handler gets installed -#----------------------------------------------------------------------------- -#if 1 /* xuwentao added*/ -#ifdef SDRAM16MB - lis r10,0x0000 - addi r10,r10,0x0000 -#else - lis r10,0x1F00 - addi r10,r10,0x0000 -#endif - - mtspr evpr,r10 #EVPR: 0x0 or 0x1f000000 depending - isync # on SDRAM memory model used. - - lis r10,0xFFFF # clear PB0_PESR because some - ori r10,r10,0xFFFF # transitions from flash,changed by linguohui - mtdcr pb0pesr,r10 # to load RAM image via RiscWatch - lis r10,0x0000 # cause PB0_PESR machine checks - mtdcr pb0pear,r10 - addis r10,r10,0x0000 # clear the - mtxer r10 # XER just in case... -#endif /* xuwentao*/ - - bl initb_ebiu0 # init EBIU - - bl initb_config # config PPC and board - - - - -#------------------------------------------------------------------------ -# EVPR setup moved to top of this function. -#------------------------------------------------------------------------ -# - mtlr r30 - blr - .end diff --git a/arch/ppc/boot/simple/rw4/rw4_init_brd.S b/arch/ppc/boot/simple/rw4/rw4_init_brd.S deleted file mode 100644 index 386afdaad6c7..000000000000 --- a/arch/ppc/boot/simple/rw4/rw4_init_brd.S +++ /dev/null @@ -1,1125 +0,0 @@ -/*----------------------------------------------------------------------------+ -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1997 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+----------------------------------------------------------------------------*/ -/*----------------------------------------------------------------------------+ -| Author: Tony J. Cerreto -| Component: BSPS -| File: init_brd.s -| Purpose: Vesta Evaluation Board initialization subroutines. The following -| routines are available: -| 1. INITB_EBIU0: Initialize EBIU0. -| 2. INITB_CONFIG: Configure board. -| 3. INITB_HSMC0: Initialize HSMC0 (SDRAM). -| 4. INITB_HSMC1: Initialize HSMC1 (SDRAM). -| 5. INITB_CACHE: Initialize Data and Instruction Cache. -| 6. INITB_DCACHE: Initialize Data Cache. -| 7. INITB_ICACHE: Initialize Instruction Cache. -| 8. INITB_GET_CSPD: Get CPU Speed (Bus Speed and Processor Speed) -| -| Changes: -| Date: Author Comment: -| --------- ------ -------- -| 01-Mar-00 tjc Created -| 04-Mar-00 jfh Modified CIC_SEL3_VAL to support 1284 (Mux3 & GPIO 21-28) -| 04-Mar-00 jfh Modified XILINIX Reg 0 to support 1284 (Mux3 & GPIO 21-28) -| 04-Mar-00 jfh Modified XILINIX Reg 1 to support 1284 (Mux3 & GPIO 21-28) -| 04-Mar-00 jfh Modified XILINIX Reg 4 to support 1284 (Mux3 & GPIO 21-28) -| 19-May-00 rlb Relcoated HSMC0 to 0x1F000000 to support 32MB of contiguous -| SDRAM space. Changed cache ctl regs to reflect this. -| 22-May-00 tjc Changed initb_get_cspd interface and eliminated -| initb_get_bspd routines. -| 26-May-00 tjc Added two nop instructions after all mtxxx/mfxxx -| instructions due to PPC405 bug. -+----------------------------------------------------------------------------*/ -#define VESTA -#include "ppc_40x.h" -#include "stb.h" - -/*----------------------------------------------------------------------------+ -| BOARD CONFIGURATION DEFINES -+----------------------------------------------------------------------------*/ -#define CBS0_CR_VAL 0x00000002 /* CBS control reg value */ -#define CIC0_CR_VAL 0xD0800448 /* CIC control reg value */ -#define CIC0_SEL3_VAL 0x11500000 /* CIC select 3 reg value */ -#define CIC0_VCR_VAL 0x00631700 /* CIC video cntl reg value */ - -/*----------------------------------------------------------------------------+ -| EBIU0 BANK REGISTERS DEFINES -+----------------------------------------------------------------------------*/ -#define EBIU0_BRCRH0_VAL 0x00000000 /* BR High 0 (Extension Reg)*/ -#define EBIU0_BRCRH1_VAL 0x00000000 /* BR High 1 (Extension Reg)*/ -#define EBIU0_BRCRH2_VAL 0x40000000 /* BR High 2 (Extension Reg)*/ -#define EBIU0_BRCRH3_VAL 0x40000000 /* BR High 3 (Extension Reg)*/ -#define EBIU0_BRCRH4_VAL 0x00000000 /* BR High 4 (Extension Reg)*/ -#define EBIU0_BRCRH5_VAL 0x00000000 /* BR High 5 (Extension Reg)*/ -#define EBIU0_BRCRH6_VAL 0x00000000 /* BR High 6 (Extension Reg)*/ -#define EBIU0_BRCRH7_VAL 0x40000000 /* BR High 7 (Extension Reg)*/ - -#define EBIU0_BRCR0_VAL 0xFC58BFFE /* BR 0: 16 bit Flash 4 MB */ -#define EBIU0_BRCR1_VAL 0xFF00BFFE /* BR 1: Ext Connector 1 MB */ -#if 1 -#define EBIU0_BRCR2_VAL 0x207CFFBE /* BR 2: Xilinx 8 MB */ - /* twt == 0x3f */ -#else -#define EBIU0_BRCR2_VAL 0x207CCFBE /* BR 2: Xilinx 8 MB */ - /* twt == 0x0f */ -#endif -#define EBIU0_BRCR3_VAL 0x407CBFBE /* BR 3: IDE Drive 8 MB */ -#define EBIU0_BRCR4_VAL 0xFF00BFFF /* BR 4: Disabled. 0 MB */ -#define EBIU0_BRCR5_VAL 0xFF00BFFF /* BR 5: Disabled. 0 MB */ -#define EBIU0_BRCR6_VAL 0xFF00BFFF /* BR 6: Disabled. 0 MB */ -#define EBIU0_BRCR7_VAL 0xCE3F0003 /* BR 7: Line Mode DMA 2 MB */ - -/*----------------------------------------------------------------------------+ -| GPIO DEFINES -+----------------------------------------------------------------------------*/ -#define STB_GPIO0_OUTPUT (STB_GPIO0_BASE_ADDRESS+ 0x00) -#define STB_GPIO0_TC (STB_GPIO0_BASE_ADDRESS+ 0x04) -#define STB_GPIO0_OS_0_31 (STB_GPIO0_BASE_ADDRESS+ 0x08) -#define STB_GPIO0_OS_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x0C) -#define STB_GPIO0_TS_0_31 (STB_GPIO0_BASE_ADDRESS+ 0x10) -#define STB_GPIO0_TS_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x14) -#define STB_GPIO0_OD (STB_GPIO0_BASE_ADDRESS+ 0x18) -#define STB_GPIO0_INPUT (STB_GPIO0_BASE_ADDRESS+ 0x1C) -#define STB_GPIO0_R1 (STB_GPIO0_BASE_ADDRESS+ 0x20) -#define STB_GPIO0_R2 (STB_GPIO0_BASE_ADDRESS+ 0x24) -#define STB_GPIO0_R3 (STB_GPIO0_BASE_ADDRESS+ 0x28) -#define STB_GPIO0_IS_1_0_31 (STB_GPIO0_BASE_ADDRESS+ 0x30) -#define STB_GPIO0_IS_1_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x34) -#define STB_GPIO0_IS_2_0_31 (STB_GPIO0_BASE_ADDRESS+ 0x38) -#define STB_GPIO0_IS_2_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x3C) -#define STB_GPIO0_IS_3_0_31 (STB_GPIO0_BASE_ADDRESS+ 0x40) -#define STB_GPIO0_IS_3_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x44) -#define STB_GPIO0_SS_1 (STB_GPIO0_BASE_ADDRESS+ 0x50) -#define STB_GPIO0_SS_2 (STB_GPIO0_BASE_ADDRESS+ 0x54) -#define STB_GPIO0_SS_3 (STB_GPIO0_BASE_ADDRESS+ 0x58) - -#define GPIO0_TC_VAL 0x0C020004 /* three-state control val */ -#define GPIO0_OS_0_31_VAL 0x51A00004 /* output select 0-31 val */ -#define GPIO0_OS_32_63_VAL 0x0000002F /* output select 32-63 val */ -#define GPIO0_TS_0_31_VAL 0x51A00000 /* three-state sel 0-31 val*/ -#define GPIO0_TS_32_63_VAL 0x0000000F /* three-state sel 32-63 val*/ -#define GPIO0_OD_VAL 0xC0000004 /* open drain val */ -#define GPIO0_IS_1_0_31_VAL 0x50000151 /* input select 1 0-31 val */ -#define GPIO0_IS_1_32_63_VAL 0x00000000 /* input select 1 32-63 val */ -#define GPIO0_IS_2_0_31_VAL 0x00000000 /* input select 2 0-31 val */ -#define GPIO0_IS_2_32_63_VAL 0x00000000 /* input select 2 32-63 val */ -#define GPIO0_IS_3_0_31_VAL 0x00000440 /* input select 3 0-31 val */ -#define GPIO0_IS_3_32_63_VAL 0x00000000 /* input select 3 32-63 val */ -#define GPIO0_SS_1_VAL 0x00000000 /* sync select 1 val */ -#define GPIO0_SS_2_VAL 0x00000000 /* sync select 2 val */ -#define GPIO0_SS_3_VAL 0x00000000 /* sync select 3 val */ - -/*----------------------------------------------------------------------------+ -| XILINX DEFINES -+----------------------------------------------------------------------------*/ -#define STB_XILINX_LED (STB_FPGA_BASE_ADDRESS+ 0x0100) -#define STB_XILINX1_REG0 (STB_FPGA_BASE_ADDRESS+ 0x40000) -#define STB_XILINX1_REG1 (STB_FPGA_BASE_ADDRESS+ 0x40002) -#define STB_XILINX1_REG2 (STB_FPGA_BASE_ADDRESS+ 0x40004) -#define STB_XILINX1_REG3 (STB_FPGA_BASE_ADDRESS+ 0x40006) -#define STB_XILINX1_REG4 (STB_FPGA_BASE_ADDRESS+ 0x40008) -#define STB_XILINX1_REG5 (STB_FPGA_BASE_ADDRESS+ 0x4000A) -#define STB_XILINX1_REG6 (STB_FPGA_BASE_ADDRESS+ 0x4000C) -#define STB_XILINX1_ID (STB_FPGA_BASE_ADDRESS+ 0x4000E) -#define STB_XILINX1_FLUSH (STB_FPGA_BASE_ADDRESS+ 0x4000E) -#define STB_XILINX2_REG0 (STB_FPGA_BASE_ADDRESS+ 0x80000) -#define STB_XILINX2_REG1 (STB_FPGA_BASE_ADDRESS+ 0x80002) -#define STB_XILINX2_REG2 (STB_FPGA_BASE_ADDRESS+ 0x80004) - -#define XILINX1_R0_VAL 0x2440 /* Xilinx 1 Register 0 Val */ -#define XILINX1_R1_VAL 0x0025 /* Xilinx 1 Register 1 Val */ -#define XILINX1_R2_VAL 0x0441 /* Xilinx 1 Register 2 Val */ -#define XILINX1_R3_VAL 0x0008 /* Xilinx 1 Register 3 Val */ -#define XILINX1_R4_VAL 0x0100 /* Xilinx 1 Register 4 Val */ -#define XILINX1_R5_VAL 0x6810 /* Xilinx 1 Register 5 Val */ -#define XILINX1_R6_VAL 0x0000 /* Xilinx 1 Register 6 Val */ -#if 0 -#define XILINX2_R0_VAL 0x0008 /* Xilinx 2 Register 0 Val */ -#define XILINX2_R1_VAL 0x0000 /* Xilinx 2 Register 1 Val */ -#else -#define XILINX2_R0_VAL 0x0018 /* disable IBM IrDA RxD */ -#define XILINX2_R1_VAL 0x0008 /* enable SICC MAX chip */ -#endif -#define XILINX2_R2_VAL 0x0000 /* Xilinx 2 Register 2 Val */ - -/*----------------------------------------------------------------------------+ -| HSMC BANK REGISTERS DEFINES -+----------------------------------------------------------------------------*/ -#ifdef SDRAM16MB -#define HSMC0_BR0_VAL 0x000D2D55 /* 0x1F000000-007FFFFF R/W */ -#define HSMC0_BR1_VAL 0x008D2D55 /* 0x1F800000-1FFFFFFF R/W */ -#else -#define HSMC0_BR0_VAL 0x1F0D2D55 /* 0x1F000000-007FFFFF R/W */ -#define HSMC0_BR1_VAL 0x1F8D2D55 /* 0x1F800000-1FFFFFFF R/W */ -#endif -#define HSMC1_BR0_VAL 0xA00D2D55 /* 0xA0000000-A07FFFFF R/W */ -#define HSMC1_BR1_VAL 0xA08D2D55 /* 0xA0800000-A0FFFFFF R/W */ - -/*----------------------------------------------------------------------------+ -| CACHE DEFINES -+----------------------------------------------------------------------------*/ -#define DCACHE_NLINES 128 /* no. D-cache lines */ -#define DCACHE_NBYTES 32 /* no. bytes/ D-cache line */ -#define ICACHE_NLINES 256 /* no. I-cache lines */ -#define ICACHE_NBYTES 32 /* no. bytes/ I-cache line */ -#ifdef SDRAM16MB -#define DCACHE_ENABLE 0x80000000 /* D-cache regions to enable*/ -#define ICACHE_ENABLE 0x80000001 /* I-cache regions to enable*/ -#else -#define DCACHE_ENABLE 0x18000000 /* D-cache regions to enable*/ -#define ICACHE_ENABLE 0x18000001 /* I-cache regions to enable*/ -#endif - -/*----------------------------------------------------------------------------+ -| CPU CORE SPEED CALCULATION DEFINES -+----------------------------------------------------------------------------*/ -#define GCS_LCNT 500000 /* CPU speed loop count */ -#define GCS_TROW_BYTES 8 /* no. bytes in table row */ -#define GCS_CTICK_TOL 100 /* allowable clock tick tol */ -#define GCS_NMULT 4 /* no. of core speed mults */ - - /*--------------------------------------------------------------------+ - | No. 13.5Mhz - | Clock Ticks - | based on a - | loop count Bus - | of 100,000 Speed - +--------------------------------------------------------------------*/ -gcs_lookup_table: - .int 50000, 54000000 /* 54.0 Mhz */ - .int 66667, 40500000 /* 40.5 Mhz */ - .int 54545, 49500000 /* 49.5 Mhz */ - .int 46154, 58500000 /* 58.5 Mhz */ - .int 0, 0 /* end of table flag */ - - -/*****************************************************************************+ -| XXXXXXX XXX XXX XXXXXX XXXXXXX XXXXXX XX XX XX XXXX -| XX X XX XX X XX X XX X XX XX XXX XX XXXX XX -| XX X XXX XX XX X XX XX XXXX XX XX XX XX -| XXXX X XX XXXX XXXXX XX XXXX XX XX XX -| XX X XXX XX XX X XX XX XX XXX XXXXXX XX -| XX X XX XX XX XX X XX XX XX XX XX XX XX XX -| XXXXXXX XXX XXX XXXX XXXXXXX XXX XX XX XX XX XX XXXXXXX -+*****************************************************************************/ -/****************************************************************************** -| -| Routine: INITB_EBIU0. -| -| Purpose: Initialize all the EBIU0 Bank Registers -| Parameters: None. -| Returns: None. -| -******************************************************************************/ - function_prolog(initb_ebiu0) - /*--------------------------------------------------------------------+ - | Set EBIU0 Bank 0 - +--------------------------------------------------------------------*/ - lis r10,EBIU0_BRCR0_VAL@h - ori r10,r10,EBIU0_BRCR0_VAL@l - mtdcr ebiu0_brcr0,r10 - lis r10,EBIU0_BRCRH0_VAL@h - ori r10,r10,EBIU0_BRCRH0_VAL@l - mtdcr ebiu0_brcrh0,r10 - - /*--------------------------------------------------------------------+ - | Set EBIU0 Bank 1 - +--------------------------------------------------------------------*/ - lis r10,EBIU0_BRCR1_VAL@h - ori r10,r10,EBIU0_BRCR1_VAL@l - mtdcr ebiu0_brcr1,r10 - lis r10,EBIU0_BRCRH1_VAL@h - ori r10,r10,EBIU0_BRCRH1_VAL@l - mtdcr ebiu0_brcrh1,r10 - - /*--------------------------------------------------------------------+ - | Set EBIU0 Bank 2 - +--------------------------------------------------------------------*/ - lis r10,EBIU0_BRCR2_VAL@h - ori r10,r10,EBIU0_BRCR2_VAL@l - mtdcr ebiu0_brcr2,r10 - lis r10,EBIU0_BRCRH2_VAL@h - ori r10,r10,EBIU0_BRCRH2_VAL@l - mtdcr ebiu0_brcrh2,r10 - - /*--------------------------------------------------------------------+ - | Set EBIU0 Bank 3 - +--------------------------------------------------------------------*/ - lis r10,EBIU0_BRCR3_VAL@h - ori r10,r10,EBIU0_BRCR3_VAL@l - mtdcr ebiu0_brcr3,r10 - lis r10,EBIU0_BRCRH3_VAL@h - ori r10,r10,EBIU0_BRCRH3_VAL@l - mtdcr ebiu0_brcrh3,r10 - - /*--------------------------------------------------------------------+ - | Set EBIU0 Bank 4 - +--------------------------------------------------------------------*/ - lis r10,EBIU0_BRCR4_VAL@h - ori r10,r10,EBIU0_BRCR4_VAL@l - mtdcr ebiu0_brcr4,r10 - lis r10,EBIU0_BRCRH4_VAL@h - ori r10,r10,EBIU0_BRCRH4_VAL@l - mtdcr ebiu0_brcrh4,r10 - - /*--------------------------------------------------------------------+ - | Set EBIU0 Bank 5 - +--------------------------------------------------------------------*/ - lis r10,EBIU0_BRCR5_VAL@h - ori r10,r10,EBIU0_BRCR5_VAL@l - mtdcr ebiu0_brcr5,r10 - lis r10,EBIU0_BRCRH5_VAL@h - ori r10,r10,EBIU0_BRCRH5_VAL@l - mtdcr ebiu0_brcrh5,r10 - - /*--------------------------------------------------------------------+ - | Set EBIU0 Bank 6 - +--------------------------------------------------------------------*/ - lis r10,EBIU0_BRCR6_VAL@h - ori r10,r10,EBIU0_BRCR6_VAL@l - mtdcr ebiu0_brcr6,r10 - lis r10,EBIU0_BRCRH6_VAL@h - ori r10,r10,EBIU0_BRCRH6_VAL@l - mtdcr ebiu0_brcrh6,r10 - - /*--------------------------------------------------------------------+ - | Set EBIU0 Bank 7 - +--------------------------------------------------------------------*/ - lis r10,EBIU0_BRCR7_VAL@h - ori r10,r10,EBIU0_BRCR7_VAL@l - mtdcr ebiu0_brcr7,r10 - lis r10,EBIU0_BRCRH7_VAL@h - ori r10,r10,EBIU0_BRCRH7_VAL@l - mtdcr ebiu0_brcrh7,r10 - - blr - function_epilog(initb_ebiu0) - - -/****************************************************************************** -| -| Routine: INITB_CONFIG -| -| Purpose: Configure the Vesta Evaluation Board. The following items -| will be configured: -| 1. Cross-Bar Switch. -| 2. Chip Interconnect. -| 3. Clear/reset key PPC registers. -| 4. Xilinx and GPIO Registers. -| -| Returns: None. -| -******************************************************************************/ - function_prolog(initb_config) - /*--------------------------------------------------------------------+ - | Init CROSS-BAR SWITCH - +--------------------------------------------------------------------*/ - lis r10,CBS0_CR_VAL@h /* r10 <- CBS Cntl Reg val */ - ori r10,r10,CBS0_CR_VAL@l - mtdcr cbs0_cr,r10 - - /*--------------------------------------------------------------------+ - | Init Chip-Interconnect (CIC) Registers - +--------------------------------------------------------------------*/ - lis r10,CIC0_CR_VAL@h /* r10 <- CIC Cntl Reg val */ - ori r10,r10,CIC0_CR_VAL@l - mtdcr cic0_cr,r10 - - lis r10,CIC0_SEL3_VAL@h /* r10 <- CIC SEL3 Reg val */ - ori r10,r10,CIC0_SEL3_VAL@l - mtdcr cic0_sel3,r10 - - lis r10,CIC0_VCR_VAL@h /* r10 <- CIC Vid C-Reg val */ - ori r10,r10,CIC0_VCR_VAL@l - mtdcr cic0_vcr,r10 - - /*--------------------------------------------------------------------+ - | Clear SGR and DCWR - +--------------------------------------------------------------------*/ - li r10,0x0000 - mtspr sgr,r10 - mtspr dcwr,r10 - - /*--------------------------------------------------------------------+ - | Clear/set up some machine state registers. - +--------------------------------------------------------------------*/ - li r10,0x0000 /* r10 <- 0 */ - mtdcr ebiu0_besr,r10 /* clr Bus Err Syndrome Reg */ - mtspr esr,r10 /* clr Exceptn Syndrome Reg */ - mttcr r10 /* timer control register */ - - mtdcr uic0_er,r10 /* disable all interrupts */ - - /* UIC_IIC0 | UIC_IIC1 | UIC_U0 | UIC_IR_RCV | UIC_IR_XMIT */ - lis r10, 0x00600e00@h - ori r10,r10,0x00600e00@l - mtdcr uic0_pr,r10 - - li r10,0x00000020 /* UIC_EIR1 */ - mtdcr uic0_tr,r10 - - lis r10,0xFFFF /* r10 <- 0xFFFFFFFF */ - ori r10,r10,0xFFFF /* */ - mtdbsr r10 /* clear/reset the dbsr */ - mtdcr uic0_sr,r10 /* clear pending interrupts */ - - li r10,0x1000 /* set Machine Exception bit*/ - oris r10,r10,0x2 /* set Criticl Exception bit*/ - mtmsr r10 /* change MSR */ - - /*--------------------------------------------------------------------+ - | Clear XER. - +--------------------------------------------------------------------*/ - li r10,0x0000 - mtxer r10 - - /*--------------------------------------------------------------------+ - | Init GPIO0 Registers - +--------------------------------------------------------------------*/ - lis r10, STB_GPIO0_TC@h /* Three-state control */ - ori r10,r10,STB_GPIO0_TC@l - lis r11, GPIO0_TC_VAL@h - ori r11,r11,GPIO0_TC_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_OS_0_31@h /* output select 0-31 */ - ori r10,r10,STB_GPIO0_OS_0_31@l - lis r11, GPIO0_OS_0_31_VAL@h - ori r11,r11,GPIO0_OS_0_31_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_OS_32_63@h /* output select 32-63 */ - ori r10,r10,STB_GPIO0_OS_32_63@l - lis r11, GPIO0_OS_32_63_VAL@h - ori r11,r11,GPIO0_OS_32_63_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_TS_0_31@h /* three-state select 0-31 */ - ori r10,r10,STB_GPIO0_TS_0_31@l - lis r11, GPIO0_TS_0_31_VAL@h - ori r11,r11,GPIO0_TS_0_31_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_TS_32_63@h /* three-state select 32-63 */ - ori r10,r10,STB_GPIO0_TS_32_63@l - lis r11, GPIO0_TS_32_63_VAL@h - ori r11,r11,GPIO0_TS_32_63_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_OD@h /* open drain */ - ori r10,r10,STB_GPIO0_OD@l - lis r11, GPIO0_OD_VAL@h - ori r11,r11,GPIO0_OD_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_IS_1_0_31@h /* input select 1, 0-31 */ - ori r10,r10,STB_GPIO0_IS_1_0_31@l - lis r11, GPIO0_IS_1_0_31_VAL@h - ori r11,r11,GPIO0_IS_1_0_31_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_IS_1_32_63@h /* input select 1, 32-63 */ - ori r10,r10,STB_GPIO0_IS_1_32_63@l - lis r11, GPIO0_IS_1_32_63_VAL@h - ori r11,r11,GPIO0_IS_1_32_63_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_IS_2_0_31@h /* input select 2, 0-31 */ - ori r10,r10,STB_GPIO0_IS_2_0_31@l - lis r11, GPIO0_IS_2_0_31_VAL@h - ori r11,r11,GPIO0_IS_2_0_31_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_IS_2_32_63@h /* input select 2, 32-63 */ - ori r10,r10,STB_GPIO0_IS_2_32_63@l - lis r11, GPIO0_IS_2_32_63_VAL@h - ori r11,r11,GPIO0_IS_2_32_63_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_IS_3_0_31@h /* input select 3, 0-31 */ - ori r10,r10,STB_GPIO0_IS_3_0_31@l - lis r11, GPIO0_IS_3_0_31_VAL@h - ori r11,r11,GPIO0_IS_3_0_31_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_IS_3_32_63@h /* input select 3, 32-63 */ - ori r10,r10,STB_GPIO0_IS_3_32_63@l - lis r11, GPIO0_IS_3_32_63_VAL@h - ori r11,r11,GPIO0_IS_3_32_63_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_SS_1@h /* sync select 1 */ - ori r10,r10,STB_GPIO0_SS_1@l - lis r11, GPIO0_SS_1_VAL@h - ori r11,r11,GPIO0_SS_1_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_SS_2@h /* sync select 2 */ - ori r10,r10,STB_GPIO0_SS_2@l - lis r11, GPIO0_SS_2_VAL@h - ori r11,r11,GPIO0_SS_2_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_SS_3@h /* sync select 3 */ - ori r10,r10,STB_GPIO0_SS_3@l - lis r11, GPIO0_SS_3_VAL@h - ori r11,r11,GPIO0_SS_3_VAL@l - stw r11,0(r10) - - /*--------------------------------------------------------------------+ - | Init Xilinx #1 Registers - +--------------------------------------------------------------------*/ - lis r10, STB_XILINX1_REG0@h /* init Xilinx1 Reg 0 */ - ori r10,r10,STB_XILINX1_REG0@l - li r11,XILINX1_R0_VAL - sth r11,0(r10) - - lis r10, STB_XILINX1_REG1@h /* init Xilinx1 Reg 1 */ - ori r10,r10,STB_XILINX1_REG1@l - li r11,XILINX1_R1_VAL - sth r11,0(r10) - - lis r10, STB_XILINX1_REG2@h /* init Xilinx1 Reg 2 */ - ori r10,r10,STB_XILINX1_REG2@l - li r11,XILINX1_R2_VAL - sth r11,0(r10) - - lis r10, STB_XILINX1_REG3@h /* init Xilinx1 Reg 3 */ - ori r10,r10,STB_XILINX1_REG3@l - li r11,XILINX1_R3_VAL - sth r11,0(r10) - - lis r10, STB_XILINX1_REG4@h /* init Xilinx1 Reg 4 */ - ori r10,r10,STB_XILINX1_REG4@l - li r11,XILINX1_R4_VAL - sth r11,0(r10) - - lis r10, STB_XILINX1_REG5@h /* init Xilinx1 Reg 5 */ - ori r10,r10,STB_XILINX1_REG5@l - li r11,XILINX1_R5_VAL - sth r11,0(r10) - - lis r10, STB_XILINX1_REG6@h /* init Xilinx1 Reg 6 */ - ori r10,r10,STB_XILINX1_REG6@l - li r11,XILINX1_R6_VAL - sth r11,0(r10) - - lis r10, STB_XILINX1_FLUSH@h /* latch registers in Xilinx*/ - ori r10,r10,STB_XILINX1_FLUSH@l - li r11,0x0000 - sth r11,0(r10) - - /*--------------------------------------------------------------------+ - | Init Xilinx #2 Registers - +--------------------------------------------------------------------*/ - lis r10, STB_XILINX2_REG0@h /* init Xilinx2 Reg 0 */ - ori r10,r10,STB_XILINX2_REG0@l - li r11,XILINX2_R0_VAL - sth r11,0(r10) - - lis r10, STB_XILINX2_REG1@h /* init Xilinx2 Reg 1 */ - ori r10,r10,STB_XILINX2_REG1@l - li r11,XILINX2_R1_VAL - sth r11,0(r10) - - lis r10, STB_XILINX2_REG2@h /* init Xilinx2 Reg 2 */ - ori r10,r10,STB_XILINX2_REG2@l - li r11,XILINX2_R2_VAL - sth r11,0(r10) - - blr - function_epilog(initb_config) - - -/****************************************************************************** -| -| Routine: INITB_HSMC0. -| -| Purpose: Initialize the HSMC0 Registers for SDRAM -| Parameters: None. -| Returns: R3 = 0: Successful -| = -1: Unsuccessful, SDRAM did not reset properly. -| -******************************************************************************/ - function_prolog(initb_hsmc0) - mflr r0 /* Save return addr */ - - /*--------------------------------------------------------------------+ - | Set Global SDRAM Controller to recommended default - +--------------------------------------------------------------------*/ - lis r10,0x6C00 - ori r10,r10,0x0000 - mtdcr hsmc0_gr,r10 - - /*--------------------------------------------------------------------+ - | Set HSMC0 Data Register to recommended default - +--------------------------------------------------------------------*/ - lis r10,0x0037 - ori r10,r10,0x0000 - mtdcr hsmc0_data,r10 - - /*--------------------------------------------------------------------+ - | Init HSMC0 Bank Register 0 - +--------------------------------------------------------------------*/ - lis r10,HSMC0_BR0_VAL@h - ori r10,r10,HSMC0_BR0_VAL@l - mtdcr hsmc0_br0,r10 - - /*--------------------------------------------------------------------+ - | Init HSMC0 Bank Register 1 - +--------------------------------------------------------------------*/ - lis r10,HSMC0_BR1_VAL@h - ori r10,r10,HSMC0_BR1_VAL@l - mtdcr hsmc0_br1,r10 - - /*--------------------------------------------------------------------+ - | Set HSMC0 Control Reg 0 - +--------------------------------------------------------------------*/ - lis r10,0x8077 /* PRECHARGE ALL DEVICE BKS */ - ori r10,r10,0x0000 - mtdcr hsmc0_cr0,r10 - li r3,0x0000 - bl hsmc_cr_wait /* wait for op completion */ - cmpwi cr0,r3,0x0000 - bne cr0,hsmc0_err - - lis r10,0x8078 /* AUTO-REFRESH */ - ori r10,r10,0x0000 - mtdcr hsmc0_cr0,r10 - li r3,0x0000 - bl hsmc_cr_wait /* wait for op completion */ - cmpwi cr0,r3,0x0000 - bne cr0,hsmc0_err - - lis r10,0x8070 /* PROG MODE W/DATA REG VAL */ - ori r10,r10,0x8000 - mtdcr hsmc0_cr0,r10 - li r3,0x0000 - bl hsmc_cr_wait /* wait for op completion */ - cmpwi cr0,r3,0x0000 - bne hsmc0_err - - /*--------------------------------------------------------------------+ - | Set HSMC0 Control Reg 1 - +--------------------------------------------------------------------*/ - lis r10,0x8077 /* PRECHARGE ALL DEVICE BKS */ - ori r10,r10,0x0000 - mtdcr hsmc0_cr1,r10 - li r3,0x0001 - bl hsmc_cr_wait /* wait for op completion */ - cmpwi cr0,r3,0x0000 - bne cr0,hsmc0_err - - lis r10,0x8078 /* AUTO-REFRESH */ - ori r10,r10,0x0000 - mtdcr hsmc0_cr1,r10 - li r3,0x0001 - bl hsmc_cr_wait /* wait for op completion */ - cmpwi cr0,r3,0x0000 - bne cr0,hsmc0_err - - lis r10,0x8070 /* PROG MODE W/DATA REG VAL */ - ori r10,r10,0x8000 - mtdcr hsmc0_cr1,r10 - li r3,0x0001 - bl hsmc_cr_wait /* wait for op completion */ - cmpwi cr0,r3,0x0000 - bne cr0,hsmc0_err - - /*--------------------------------------------------------------------+ - | Set HSMC0 Refresh Register - +--------------------------------------------------------------------*/ - lis r10,0x0FE1 - ori r10,r10,0x0000 - mtdcr hsmc0_crr,r10 - li r3,0 - -hsmc0_err: - mtlr r0 - blr - function_epilog(initb_hsmc0) - - -/****************************************************************************** -| -| Routine: INITB_HSMC1. -| -| Purpose: Initialize the HSMC1 Registers for SDRAM -| Parameters: None. -| Returns: R3 = 0: Successful -| = -1: Unsuccessful, SDRAM did not reset properly. -| -******************************************************************************/ - function_prolog(initb_hsmc1) - mflr r0 /* Save return addr */ - - /*--------------------------------------------------------------------+ - | Set Global SDRAM Controller to recommended default - +--------------------------------------------------------------------*/ - lis r10,0x6C00 - ori r10,r10,0x0000 - mtdcr hsmc1_gr,r10 - - /*--------------------------------------------------------------------+ - | Set HSMC1 Data Register to recommended default - +--------------------------------------------------------------------*/ - lis r10,0x0037 - ori r10,r10,0x0000 - mtdcr hsmc1_data,r10 - - /*--------------------------------------------------------------------+ - | Init HSMC1 Bank Register 0 - +--------------------------------------------------------------------*/ - lis r10,HSMC1_BR0_VAL@h - ori r10,r10,HSMC1_BR0_VAL@l - mtdcr hsmc1_br0,r10 - - /*--------------------------------------------------------------------+ - | Init HSMC1 Bank Register 1 - +--------------------------------------------------------------------*/ - lis r10,HSMC1_BR1_VAL@h - ori r10,r10,HSMC1_BR1_VAL@l - mtdcr hsmc1_br1,r10 - - /*--------------------------------------------------------------------+ - | Set HSMC1 Control Reg 0 - +--------------------------------------------------------------------*/ - lis r10,0x8077 /* PRECHARGE ALL DEVICE BANKS */ - ori r10,r10,0x0000 - mtdcr hsmc1_cr0,r10 - li r3,0x0002 - bl hsmc_cr_wait /* wait for operation completion */ - cmpwi cr0,r3,0x0000 - bne hsmc1_err - - lis r10,0x8078 /* AUTO-REFRESH */ - ori r10,r10,0x0000 - mtdcr hsmc1_cr0,r10 - li r3,0x0002 - bl hsmc_cr_wait /* wait for operation completion */ - cmpwi cr0,r3,0x0000 - bne hsmc1_err - - lis r10,0x8070 /* PROGRAM MODE W/DATA REG VALUE */ - ori r10,r10,0x8000 - mtdcr hsmc1_cr0,r10 - li r3,0x0002 - bl hsmc_cr_wait /* wait for operation completion */ - cmpwi cr0,r3,0x0000 - bne hsmc1_err - - /*--------------------------------------------------------------------+ - | Set HSMC1 Control Reg 1 - +--------------------------------------------------------------------*/ - lis r10,0x8077 /* PRECHARGE ALL DEVICE BKS */ - ori r10,r10,0x0000 - mtdcr hsmc1_cr1,r10 - li r3,0x0003 - bl hsmc_cr_wait /* wait for op completion */ - cmpwi cr0,r3,0x0000 - bne hsmc1_err - - lis r10,0x8078 /* AUTO-REFRESH */ - ori r10,r10,0x0000 - mtdcr hsmc1_cr1,r10 - li r3,0x0003 - bl hsmc_cr_wait /* wait for op completion */ - cmpwi cr0,r3,0x0000 - bne hsmc1_err - - lis r10,0x8070 /* PROG MODE W/DATA REG VAL */ - ori r10,r10,0x8000 - mtdcr hsmc1_cr1,r10 - li r3,0x0003 - bl hsmc_cr_wait /* wait for op completion */ - cmpwi cr0,r3,0x0000 - bne hsmc1_err - - /*--------------------------------------------------------------------+ - | Set HSMC1 Refresh Register - +--------------------------------------------------------------------*/ - lis r10,0x0FE1 - ori r10,r10,0x0000 - mtdcr hsmc1_crr,r10 - xor r3,r3,r3 - -hsmc1_err: - mtlr r0 - blr - function_epilog(initb_hsmc1) - - -/****************************************************************************** -| -| Routine: INITB_CACHE -| -| Purpose: This routine will enable Data and Instruction Cache. -| The Data Cache is an 8K two-way set associative and the -| Instruction Cache is an 16K two-way set associative cache. -| -| Parameters: None. -| -| Returns: None. -| -******************************************************************************/ - function_prolog(initb_cache) - mflr r0 /* Save return addr */ - - bl initb_Dcache /* enable D-Cache */ - bl initb_Icache /* enable I-Cache */ - - mtlr r0 - blr - function_epilog(initb_cache) - - -/****************************************************************************** -| -| Routine: INITB_DCACHE -| -| Purpose: This routine will invalidate all data in the Data Cache and -| then enable D-Cache. If cache is enabled already, the D-Cache -| will be flushed before the data is invalidated. -| -| Parameters: None. -| -| Returns: None. -| -******************************************************************************/ - function_prolog(initb_Dcache) - /*--------------------------------------------------------------------+ - | Flush Data Cache if enabled - +--------------------------------------------------------------------*/ - mfdccr r10 /* r10 <- DCCR */ - isync /* ensure prev insts done */ - cmpwi r10,0x00 - beq ic_dcinv /* D-cache off, invalidate */ - - /*--------------------------------------------------------------------+ - | Data Cache enabled, force known memory addresses to be Cached - +--------------------------------------------------------------------*/ - lis r10,HSMC0_BR0_VAL@h /* r10 <- first memory loc */ - andis. r10,r10,0xFFF0 - li r11,DCACHE_NLINES /* r11 <- # A-way addresses */ - addi r11,r11,DCACHE_NLINES /* r11 <- # B-way addresses */ - mtctr r11 /* set loop counter */ - -ic_dcload: - lwz r12,0(r10) /* force cache of address */ - addi r10,r10,DCACHE_NBYTES /* r10 <- next memory loc */ - bdnz ic_dcload - sync /* ensure prev insts done */ - isync - - /*--------------------------------------------------------------------+ - | Flush the known memory addresses from Cache - +--------------------------------------------------------------------*/ - lis r10,HSMC0_BR0_VAL@h /* r10 <- first memory loc */ - andis. r10,r10,0xFFF0 - mtctr r11 /* set loop counter */ - -ic_dcflush: - dcbf 0,r10 /* flush D-cache line */ - addi r10,r10,DCACHE_NBYTES /* r10 <- next memory loc */ - bdnz ic_dcflush - sync /* ensure prev insts done */ - isync - - /*--------------------------------------------------------------------+ - | Disable then invalidate Data Cache - +--------------------------------------------------------------------*/ - li r10,0 /* r10 <- 0 */ - mtdccr r10 /* disable the D-Cache */ - isync /* ensure prev insts done */ - -ic_dcinv: - li r10,0 /* r10 <- line address */ - li r11,DCACHE_NLINES /* r11 <- # lines in cache */ - mtctr r11 /* set loop counter */ - -ic_dcloop: - dccci 0,r10 /* invalidate A/B cache lns */ - addi r10,r10,DCACHE_NBYTES /* bump to next line */ - bdnz ic_dcloop - sync /* ensure prev insts done */ - isync - - /*--------------------------------------------------------------------+ - | Enable Data Cache - +--------------------------------------------------------------------*/ - lis r10,DCACHE_ENABLE@h /* r10 <- D-cache enable msk*/ - ori r10,r10,DCACHE_ENABLE@l - mtdccr r10 - sync /* ensure prev insts done */ - isync - - blr - function_epilog(initb_Dcache) - - -/****************************************************************************** -| -| Routine: INITB_ICACHE -| -| Purpose: This routine will invalidate all data in the Instruction -| Cache then enable I-Cache. -| -| Parameters: None. -| -| Returns: None. -| -******************************************************************************/ - function_prolog(initb_Icache) - /*--------------------------------------------------------------------+ - | Invalidate Instruction Cache - +--------------------------------------------------------------------*/ - li r10,0 /* r10 <- lines address */ - iccci 0,r10 /* invalidate all I-cache */ - sync /* ensure prev insts done */ - isync - - /*--------------------------------------------------------------------+ - | Enable Instruction Cache - +--------------------------------------------------------------------*/ - lis r10,ICACHE_ENABLE@h /* r10 <- I-cache enable msk*/ - ori r10,r10,ICACHE_ENABLE@l - mticcr r10 - sync /* ensure prev insts done */ - isync - - blr - function_epilog(initb_Icache) - -#if 0 -/****************************************************************************** -| -| Routine: INITB_GET_CSPD -| -| Purpose: Determine the CPU Core Speed. The 13.5 Mhz Time Base -| Counter (TBC) is used to measure a conditional branch -| instruction. -| -| Parameters: R3 = Address of Bus Speed -| R4 = Address of Core Speed -| -| Returns: (R3) = >0: Bus Speed. -| 0: Bus Speed not found in Look-Up Table. -| (R4) = >0: Core Speed. -| 0: Core Speed not found in Look-Up Table. -| -| Note: 1. This routine assumes the bdnz branch instruction takes -| two instruction cycles to complete. -| 2. This routine must be called before interrupts are enabled. -| -******************************************************************************/ - function_prolog(initb_get_cspd) - mflr r0 /* Save return address */ - /*--------------------------------------------------------------------+ - | Set-up timed loop - +--------------------------------------------------------------------*/ - lis r9,gcs_time_loop@h /* r9 <- addr loop instr */ - ori r9,r9,gcs_time_loop@l - lis r10,GCS_LCNT@h /* r10 <- loop count */ - ori r10,r10,GCS_LCNT@l - mtctr r10 /* ctr <- loop count */ - lis r11,STB_TIMERS_TBC@h /* r11 <- TBC register addr */ - ori r11,r11,STB_TIMERS_TBC@l - li r12,0 /* r12 <- 0 */ - - /*--------------------------------------------------------------------+ - | Cache timed-loop instruction - +--------------------------------------------------------------------*/ - icbt 0,r9 - sync - isync - - /*--------------------------------------------------------------------+ - | Get number of 13.5 Mhz cycles to execute time-loop - +--------------------------------------------------------------------*/ - stw r12,0(r11) /* reset TBC */ -gcs_time_loop: - bdnz+ gcs_time_loop /* force branch pred taken */ - lwz r5,0(r11) /* r5 <- num 13.5 Mhz ticks */ - li r6,5 /* LUT based on 1/5th the...*/ - divw r5,r5,r6 /*..loop count used */ - sync - isync - - /*--------------------------------------------------------------------+ - | Look-up core speed based on TBC value - +--------------------------------------------------------------------*/ - lis r6,gcs_lookup_table@h /* r6 <- pts at core spd LUT*/ - ori r6,r6,gcs_lookup_table@l - bl gcs_cspd_lookup /* find core speed in LUT */ - - mtlr r0 /* set return address */ - blr - function_epilog(initb_get_cspd) - -#endif -/*****************************************************************************+ -| XXXX XX XX XXXXXX XXXXXXX XXXXXX XX XX XX XXXX -| XX XXX XX X XX X XX X XX XX XXX XX XXXX XX -| XX XXXX XX XX XX X XX XX XXXX XX XX XX XX -| XX XX XXXX XX XXXX XXXXX XX XXXX XX XX XX -| XX XX XXX XX XX X XX XX XX XXX XXXXXX XX -| XX XX XX XX XX X XX XX XX XX XX XX XX XX -| XXXX XX XX XXXX XXXXXXX XXX XX XX XX XX XX XXXXXXX -+*****************************************************************************/ -/****************************************************************************** -| -| Routine: HSMC_CR_WAIT -| -| Purpose: Wait for the HSMC Control Register (bits 12-16) to be reset -| after an auto-refresh, pre-charge or program mode register -| command execution. -| -| Parameters: R3 = HSMC Control Register ID. -| 0: HSMC0 CR0 -| 1: HSMC0 CR1 -| 2: HSMC1 CR0 -| 3: HSMC1 CR1 -| -| Returns: R3 = 0: Successful -| -1: Unsuccessful -| -******************************************************************************/ -hsmc_cr_wait: - - li r11,10 /* r11 <- retry counter */ - mtctr r11 /* set retry counter */ - mr r11,r3 /* r11 <- HSMC CR reg id */ - -hsmc_cr_rep: - bdz hsmc_cr_err /* branch if max retries hit*/ - - /*--------------------------------------------------------------------+ - | GET HSMCx_CRx value based on HSMC Control Register ID - +--------------------------------------------------------------------*/ -try_hsmc0_cr0: /* CHECK IF ID=HSMC0 CR0 REG*/ - cmpwi cr0,r11,0x0000 - bne cr0,try_hsmc0_cr1 - mfdcr r10,hsmc0_cr0 /* r11 <- HSMC0 CR0 value */ - b hsmc_cr_read - -try_hsmc0_cr1: /* CHECK IF ID=HSMC0 CR1 REG*/ - cmpwi cr0,r11,0x0001 - bne cr0,try_hsmc1_cr0 - mfdcr r10,hsmc0_cr1 /* r10 <- HSMC0 CR1 value */ - b hsmc_cr_read - -try_hsmc1_cr0: /* CHECK IF ID=HSMC1 CR0 REG*/ - cmpwi cr0,r11,0x0002 - bne cr0,try_hsmc1_cr1 - mfdcr r10,hsmc1_cr0 /* r10 <- HSMC1 CR0 value */ - b hsmc_cr_read - -try_hsmc1_cr1: /* CHECK IF ID=HSMC1 CR1 REG*/ - cmpwi cr0,r11,0x0003 - bne cr0,hsmc_cr_err - mfdcr r10,hsmc1_cr1 /* r10 <- HSMC1 CR1 value */ - - /*--------------------------------------------------------------------+ - | Check if HSMC CR register was reset after command execution - +--------------------------------------------------------------------*/ -hsmc_cr_read: - lis r12,0x000F /* create "AND" mask */ - ori r12,r12,0x8000 - and. r10,r10,r12 /* r10 <- HSMC CR bits 12-16*/ - bne cr0,hsmc_cr_rep /* wait for bits to reset */ - li r3,0 /* set return code = success*/ - b hsmc_cr_done - -hsmc_cr_err: /* ERROR: SDRAM didn't reset*/ - li r3,-1 /* set RC=unsuccessful */ - -hsmc_cr_done: - blr - -#if 0 -/****************************************************************************** -| -| Routine: GCS_CSPD_LOOKUP -| -| Purpose: Uses the number of 13.5 Mhz clock ticks found after executing -| the branch instruction time loop to look-up the CPU Core Speed -| in the Core Speed Look-up Table. -| -| Parameters: R3 = Address of Bus Speed -| R4 = Address of Core Speed -| R5 = Number of 13.5 Mhz clock ticks found in time loop. -| R6 = Pointer to Core-Speed Look-Up Table -| -| Returns: (R3) = >0: Bus Speed. -| 0: Bus Speed not found in Look-Up Table. -| (R4) = >0: Core Speed. -| 0: Core Speed not found in Look-Up Table. -| -| Note: Core Speed = Bus Speed * Mult Factor (1-4x). -| -******************************************************************************/ -gcs_cspd_lookup: - - li r9,1 /* r9 <- core speed mult */ - /*--------------------------------------------------------------------+ - | Get theoritical number 13.5 Mhz ticks for a given Bus Speed from - | Look-up Table. Check all mult factors to determine if calculated - | value matches theoretical value (within a tolerance). - +--------------------------------------------------------------------*/ -gcs_cspd_loop: - lwz r10,0(r6) /* r10 <- no. ticks from LUT*/ - divw r10,r10,r9 /* r10 <- div mult (1-4x) */ - subi r11,r10,GCS_CTICK_TOL /* r11 <- no. tks low range */ - addi r12,r10,GCS_CTICK_TOL /* r12 <- no. tks high range*/ - - cmpw cr0,r5,r11 /* calc value within range? */ - blt gcs_cspd_retry /* less than low range */ - cmpw cr0,r5,r12 - bgt gcs_cspd_retry /* greater than high range */ - b gcs_cspd_fnd /* calc value within range */ - - /*--------------------------------------------------------------------+ - | SO FAR CORE SPEED NOT FOUND: Check next mult factor - +--------------------------------------------------------------------*/ -gcs_cspd_retry: - addi r9,r9,1 /* bump mult factor (1-4x) */ - cmpwi cr0,r9,GCS_NMULT - ble gcs_cspd_loop - - /*--------------------------------------------------------------------+ - | SO FAR CORE SPEED NOT FOUND: Point at next Bus Speed in LUT - +--------------------------------------------------------------------*/ - li r9,1 /* reset mult factor */ - addi r6,r6,GCS_TROW_BYTES /* point at next table entry*/ - lwz r10,0(r6) - cmpwi cr0,r10,0 /* check for EOT flag */ - bne gcs_cspd_loop - - /*--------------------------------------------------------------------+ - | COMPUTE CORE SPEED AND GET BUS SPEED FROM LOOK-UP TABLE - +--------------------------------------------------------------------*/ -gcs_cspd_fnd: - lwz r5,4(r6) /* r5 <- Bus Speed in LUT */ - mullw r6,r5,r9 /* r6 <- Core speed */ - stw r5,0(r3) /* (r3) <- Bus Speed */ - stw r6,0(r4) /* (r4) <- Core Speed */ - - blr -#endif diff --git a/arch/ppc/boot/simple/rw4/stb.h b/arch/ppc/boot/simple/rw4/stb.h deleted file mode 100644 index 9afa5ab24d26..000000000000 --- a/arch/ppc/boot/simple/rw4/stb.h +++ /dev/null @@ -1,239 +0,0 @@ -/*----------------------------------------------------------------------------+ -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1999 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+----------------------------------------------------------------------------*/ -/*----------------------------------------------------------------------------+ -| Author: Maciej P. Tyrlik -| Component: Include file. -| File: stb.h -| Purpose: Common Set-tob-box definitions. -| Changes: -| Date: Comment: -| ----- -------- -| 14-Jan-97 Created for ElPaso pass 1 MPT -| 13-May-97 Added function prototype and global variables MPT -| 08-Dec-98 Added RAW IR task information MPT -| 19-Jan-99 Port to Romeo MPT -| 19-May-00 Changed SDRAM to 32MB contiguous 0x1F000000 - 0x20FFFFFF RLB -+----------------------------------------------------------------------------*/ - -#ifndef _stb_h_ -#define _stb_h_ - -/*----------------------------------------------------------------------------+ -| Read/write from I/O macros. -+----------------------------------------------------------------------------*/ -#define inbyte(port) (*((unsigned char volatile *)(port))) -#define outbyte(port,data) *(unsigned char volatile *)(port)=\ - (unsigned char)(data) - -#define inshort(port) (*((unsigned short volatile *)(port))) -#define outshort(port,data) *(unsigned short volatile *)(port)=\ - (unsigned short)(data) - -#define inword(port) (*((unsigned long volatile *)(port))) -#define outword(port,data) *(unsigned long volatile *)(port)=\ - (unsigned long)(data) - -/*----------------------------------------------------------------------------+ -| STB interrupts. -+----------------------------------------------------------------------------*/ -#define STB_XP_TP_INT 0 -#define STB_XP_APP_INT 1 -#define STB_AUD_INT 2 -#define STB_VID_INT 3 -#define STB_DMA0_INT 4 -#define STB_DMA1_INT 5 -#define STB_DMA2_INT 6 -#define STB_DMA3_INT 7 -#define STB_SCI_INT 8 -#define STB_I2C1_INT 9 -#define STB_I2C2_INT 10 -#define STB_GPT_PWM0 11 -#define STB_GPT_PWM1 12 -#define STB_SCP_INT 13 -#define STB_SSP_INT 14 -#define STB_GPT_PWM2 15 -#define STB_EXT5_INT 16 -#define STB_EXT6_INT 17 -#define STB_EXT7_INT 18 -#define STB_EXT8_INT 19 -#define STB_SCC_INT 20 -#define STB_SICC_RECV_INT 21 -#define STB_SICC_TRAN_INT 22 -#define STB_PPU_INT 23 -#define STB_DCRX_INT 24 -#define STB_EXT0_INT 25 -#define STB_EXT1_INT 26 -#define STB_EXT2_INT 27 -#define STB_EXT3_INT 28 -#define STB_EXT4_INT 29 -#define STB_REDWOOD_ENET_INT STB_EXT1_INT - -/*----------------------------------------------------------------------------+ -| STB tasks, task stack sizes, and task priorities. The actual task priority -| is 1 more than the specified number since priority 0 is reserved (system -| internally adds 1 to supplied priority number). -+----------------------------------------------------------------------------*/ -#define STB_IDLE_TASK_SS (5* 1024) -#define STB_IDLE_TASK_PRIO 0 -#define STB_LEDTEST_SS (2* 1024) -#define STB_LEDTEST_PRIO 0 -#define STB_CURSOR_TASK_SS (10* 1024) -#define STB_CURSOR_TASK_PRIO 7 -#define STB_MPEG_TASK_SS (10* 1024) -#define STB_MPEG_TASK_PRIO 9 -#define STB_DEMUX_TASK_SS (10* 1024) -#define STB_DEMUX_TASK_PRIO 20 -#define RAW_STB_IR_TASK_SS (10* 1024) -#define RAW_STB_IR_TASK_PRIO 20 - -#define STB_SERIAL_ER_TASK_SS (10* 1024) -#define STB_SERIAL_ER_TASK_PRIO 1 -#define STB_CA_TASK_SS (10* 1024) -#define STB_CA_TASK_PRIO 8 - -#define INIT_DEFAULT_VIDEO_SS (10* 1024) -#define INIT_DEFAULT_VIDEO_PRIO 8 -#define INIT_DEFAULT_SERVI_SS (10* 1024) -#define INIT_DEFAULT_SERVI_PRIO 8 -#define INIT_DEFAULT_POST_SS (10* 1024) -#define INIT_DEFAULT_POST_PRIO 8 -#define INIT_DEFAULT_INTER_SS (10* 1024) -#define INIT_DEFAULT_INTER_PRIO 8 -#define INIT_DEFAULT_BR_SS (10* 1024) -#define INIT_DEFAULT_BR_PRIO 8 -#define INITIAL_TASK_STACK_SIZE (32* 1024) - -#ifdef VESTA -/*----------------------------------------------------------------------------+ -| Vesta Overall Address Map (all addresses are double mapped, bit 0 of the -| address is not decoded. Numbers below are dependent on board configuration. -| FLASH, SDRAM, DRAM numbers can be affected by actual board setup. -| -| FFE0,0000 - FFFF,FFFF FLASH -| F200,0000 - F210,FFFF FPGA logic -| Ethernet = F200,0000 -| LED Display = F200,0100 -| Xilinx #1 Regs = F204,0000 -| Xilinx #2 Regs = F208,0000 -| Spare = F20C,0000 -| IDE CS0 = F210,0000 -| F410,0000 - F410,FFFF IDE CS1 -| C000,0000 - C7FF,FFFF OBP -| C000,0000 - C000,0014 SICC (16550 + infra red) -| C001,0000 - C001,0018 PPU (Parallel Port) -| C002,0000 - C002,001B SC0 (Smart Card 0) -| C003,0000 - C003,000F I2C0 -| C004,0000 - C004,0009 SCC (16550 UART) -| C005,0000 - C005,0124 GPT (Timers) -| C006,0000 - C006,0058 GPIO0 -| C007,0000 - C007,001b SC1 (Smart Card 1) -| C008,0000 - C008,FFFF Unused -| C009,0000 - C009,FFFF Unused -| C00A,0000 - C00A,FFFF Unused -| C00B,0000 - C00B,000F I2C1 -| C00C,0000 - C00C,0006 SCP -| C00D,0000 - C00D,0010 SSP -| A000,0000 - A0FF,FFFF SDRAM1 (16M) -| 0000,0000 - 00FF,FFFF SDRAM0 (16M) -+----------------------------------------------------------------------------*/ -#define STB_FLASH_BASE_ADDRESS 0xFFE00000 -#define STB_FPGA_BASE_ADDRESS 0xF2000000 -#define STB_SICC_BASE_ADDRESS 0xC0000000 -#define STB_PPU_BASE_ADDR 0xC0010000 -#define STB_SC0_BASE_ADDRESS 0xC0020000 -#define STB_I2C1_BASE_ADDRESS 0xC0030000 -#define STB_SCC_BASE_ADDRESS 0xC0040000 -#define STB_TIMERS_BASE_ADDRESS 0xC0050000 -#define STB_GPIO0_BASE_ADDRESS 0xC0060000 -#define STB_SC1_BASE_ADDRESS 0xC0070000 -#define STB_I2C2_BASE_ADDRESS 0xC00B0000 -#define STB_SCP_BASE_ADDRESS 0xC00C0000 -#define STB_SSP_BASE_ADDRESS 0xC00D0000 -/*----------------------------------------------------------------------------+ -|The following are used by the IBM RTOS SW. -|15-May-00 Changed these values to reflect movement of base addresses in -|order to support 32MB of contiguous SDRAM space. -|Points to the cacheable region since these values are used in IBM RTOS -|to establish the vector address. -+----------------------------------------------------------------------------*/ -#define STB_SDRAM1_BASE_ADDRESS 0x20000000 -#define STB_SDRAM1_SIZE 0x01000000 -#define STB_SDRAM0_BASE_ADDRESS 0x1F000000 -#define STB_SDRAM0_SIZE 0x01000000 - -#else -/*----------------------------------------------------------------------------+ -| ElPaso Overall Address Map (all addresses are double mapped, bit 0 of the -| address is not decoded. Numbers below are dependent on board configuration. -| FLASH, SDRAM, DRAM numbers can be affected by actual board setup. OPB -| devices are inside the ElPaso chip. -| FFE0,0000 - FFFF,FFFF FLASH -| F144,0000 - F104,FFFF FPGA logic -| F140,0000 - F100,0000 ethernet (through FPGA logic) -| C000,0000 - C7FF,FFFF OBP -| C000,0000 - C000,0014 SICC (16550+ infra red) -| C001,0000 - C001,0016 PPU (parallel port) -| C002,0000 - C002,001B SC (smart card) -| C003,0000 - C003,000F I2C 1 -| C004,0000 - C004,0009 SCC (16550 UART) -| C005,0000 - C005,0124 Timers -| C006,0000 - C006,0058 GPIO0 -| C007,0000 - C007,0058 GPIO1 -| C008,0000 - C008,0058 GPIO2 -| C009,0000 - C009,0058 GPIO3 -| C00A,0000 - C00A,0058 GPIO4 -| C00B,0000 - C00B,000F I2C 2 -| C00C,0000 - C00C,0006 SCP -| C00D,0000 - C00D,0006 SSP -| A000,0000 - A0FF,FFFF SDRAM 16M -| 0000,0000 - 00FF,FFFF DRAM 16M -+----------------------------------------------------------------------------*/ -#define STB_FLASH_BASE_ADDRESS 0xFFE00000 -#define STB_FPGA_BASE_ADDRESS 0xF1440000 -#define STB_ENET_BASE_ADDRESS 0xF1400000 -#define STB_SICC_BASE_ADDRESS 0xC0000000 -#define STB_PPU_BASE_ADDR 0xC0010000 -#define STB_SC_BASE_ADDRESS 0xC0020000 -#define STB_I2C1_BASE_ADDRESS 0xC0030000 -#define STB_SCC_BASE_ADDRESS 0xC0040000 -#define STB_TIMERS_BASE_ADDRESS 0xC0050000 -#define STB_GPIO0_BASE_ADDRESS 0xC0060000 -#define STB_GPIO1_BASE_ADDRESS 0xC0070000 -#define STB_GPIO2_BASE_ADDRESS 0xC0080000 -#define STB_GPIO3_BASE_ADDRESS 0xC0090000 -#define STB_GPIO4_BASE_ADDRESS 0xC00A0000 -#define STB_I2C2_BASE_ADDRESS 0xC00B0000 -#define STB_SCP_BASE_ADDRESS 0xC00C0000 -#define STB_SSP_BASE_ADDRESS 0xC00D0000 -#define STB_SDRAM_BASE_ADDRESS 0xA0000000 -#endif - -/*----------------------------------------------------------------------------+ -| Other common defines. -+----------------------------------------------------------------------------*/ -#ifndef TRUE -#define TRUE 1 -#endif - -#ifndef FALSE -#define FALSE 0 -#endif - -#endif /* _stb_h_ */ diff --git a/arch/ppc/boot/simple/uartlite_tty.c b/arch/ppc/boot/simple/uartlite_tty.c deleted file mode 100644 index ca1743e3e912..000000000000 --- a/arch/ppc/boot/simple/uartlite_tty.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Xilinx UARTLITE bootloader driver - * - * Copyright (c) 2007 Secret Lab Technologies Ltd. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/types.h> -#include <asm/serial.h> -#include <asm/io.h> -#include <platforms/4xx/xparameters/xparameters.h> - -#define UARTLITE_BASEADDR ((void*)(XPAR_UARTLITE_0_BASEADDR)) - -unsigned long -serial_init(int chan, void *ignored) -{ - /* Clear the RX FIFO */ - out_be32(UARTLITE_BASEADDR + 0x0C, 0x2); - return 0; -} - -void -serial_putc(unsigned long com_port, unsigned char c) -{ - while ((in_be32(UARTLITE_BASEADDR + 0x8) & 0x08) != 0); /* spin */ - out_be32(UARTLITE_BASEADDR + 0x4, c); -} - -unsigned char -serial_getc(unsigned long com_port) -{ - while ((in_be32(UARTLITE_BASEADDR + 0x8) & 0x01) == 0); /* spin */ - return in_be32(UARTLITE_BASEADDR); -} - -int -serial_tstc(unsigned long com_port) -{ - return ((in_be32(UARTLITE_BASEADDR + 0x8) & 0x01) != 0); -} |
