diff options
Diffstat (limited to 'arch/mips/nxp/pnx8550/common/setup.c')
| -rw-r--r-- | arch/mips/nxp/pnx8550/common/setup.c | 145 |
1 files changed, 0 insertions, 145 deletions
diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c deleted file mode 100644 index 64246c9c875c..000000000000 --- a/arch/mips/nxp/pnx8550/common/setup.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * - * 2.6 port, Embedded Alley Solutions, Inc - * - * Based on Per Hallsmark, per.hallsmark@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/irq.h> -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/serial_pnx8xxx.h> -#include <linux/pm.h> - -#include <asm/cpu.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/mipsregs.h> -#include <asm/reboot.h> -#include <asm/pgtable.h> -#include <asm/time.h> - -#include <glb.h> -#include <int.h> -#include <pci.h> -#include <uart.h> -#include <nand.h> - -extern void __init board_setup(void); -extern void pnx8550_machine_restart(char *); -extern void pnx8550_machine_halt(void); -extern void pnx8550_machine_power_off(void); -extern struct resource ioport_resource; -extern struct resource iomem_resource; -extern char *prom_getcmdline(void); - -struct resource standard_io_resources[] = { - { - .start = 0x00, - .end = 0x1f, - .name = "dma1", - .flags = IORESOURCE_BUSY - }, { - .start = 0x40, - .end = 0x5f, - .name = "timer", - .flags = IORESOURCE_BUSY - }, { - .start = 0x80, - .end = 0x8f, - .name = "dma page reg", - .flags = IORESOURCE_BUSY - }, { - .start = 0xc0, - .end = 0xdf, - .name = "dma2", - .flags = IORESOURCE_BUSY - }, -}; - -#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources) - -extern struct resource pci_io_resource; -extern struct resource pci_mem_resource; - -/* Return the total size of DRAM-memory, (RANK0 + RANK1) */ -unsigned long get_system_mem_size(void) -{ - /* Read IP2031_RANK0_ADDR_LO */ - unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010); - /* Read IP2031_RANK1_ADDR_HI */ - unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018); - - return dram_r1_hi - dram_r0_lo + 1; -} - -int pnx8550_console_port = -1; - -void __init plat_mem_setup(void) -{ - int i; - char* argptr; - - board_setup(); /* board specific setup */ - - _machine_restart = pnx8550_machine_restart; - _machine_halt = pnx8550_machine_halt; - pm_power_off = pnx8550_machine_power_off; - - /* Clear the Global 2 Register, PCI Inta Output Enable Registers - Bit 1:Enable DAC Powerdown - -> 0:DACs are enabled and are working normally - 1:DACs are powerdown - Bit 0:Enable of PCI inta output - -> 0 = Disable PCI inta output - 1 = Enable PCI inta output - */ - PNX8550_GLB2_ENAB_INTA_O = 0; - - /* IO/MEM resources. */ - set_io_port_base(PNX8550_PORT_BASE); - ioport_resource.start = 0; - ioport_resource.end = ~0; - iomem_resource.start = 0; - iomem_resource.end = ~0; - - /* Request I/O space for devices on this board */ - for (i = 0; i < STANDARD_IO_RESOURCES; i++) - request_resource(&ioport_resource, standard_io_resources + i); - - /* Place the Mode Control bit for GPIO pin 16 in primary function */ - /* Pin 16 is used by UART1, UA1_TX */ - outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) | - (PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT), - PNX8550_GPIO_MC1); - - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "console=ttyS")) != NULL) { - argptr += strlen("console=ttyS"); - pnx8550_console_port = *argptr == '0' ? 0 : 1; - - /* We must initialize the UART (console) before early printk */ - /* Set LCR to 8-bit and BAUD to 38400 (no 5) */ - ip3106_lcr(UART_BASE, pnx8550_console_port) = - PNX8XXX_UART_LCR_8BIT; - ip3106_baud(UART_BASE, pnx8550_console_port) = 5; - } - - return; -} |
