diff options
Diffstat (limited to 'arch/m68knommu/include/asm/m527xsim.h')
| -rw-r--r-- | arch/m68knommu/include/asm/m527xsim.h | 74 |
1 files changed, 74 insertions, 0 deletions
diff --git a/arch/m68knommu/include/asm/m527xsim.h b/arch/m68knommu/include/asm/m527xsim.h new file mode 100644 index 000000000000..1f63ab3fb3e6 --- /dev/null +++ b/arch/m68knommu/include/asm/m527xsim.h @@ -0,0 +1,74 @@ +/****************************************************************************/ + +/* + * m527xsim.h -- ColdFire 5270/5271 System Integration Module support. + * + * (C) Copyright 2004, Greg Ungerer (gerg@snapgear.com) + */ + +/****************************************************************************/ +#ifndef m527xsim_h +#define m527xsim_h +/****************************************************************************/ + + +/* + * Define the 5270/5271 SIM register set addresses. + */ +#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ +#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 1 */ +#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ +#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ +#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ +#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ +#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ +#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ +#define MCFINTC_IRLR 0x18 /* */ +#define MCFINTC_IACKL 0x19 /* */ +#define MCFINTC_ICR0 0x40 /* Base ICR register */ + +#define MCFINT_VECBASE 64 /* Vector base number */ +#define MCFINT_UART0 13 /* Interrupt number for UART0 */ +#define MCFINT_UART1 14 /* Interrupt number for UART1 */ +#define MCFINT_UART2 15 /* Interrupt number for UART2 */ +#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ + +/* + * SDRAM configuration registers. + */ +#ifdef CONFIG_M5271 +#define MCFSIM_DCR 0x40 /* SDRAM control */ +#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ +#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ +#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ +#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ +#endif +#ifdef CONFIG_M5275 +#define MCFSIM_DMR 0x40 /* SDRAM mode */ +#define MCFSIM_DCR 0x44 /* SDRAM control */ +#define MCFSIM_DCFG1 0x48 /* SDRAM configuration 1 */ +#define MCFSIM_DCFG2 0x4c /* SDRAM configuration 2 */ +#define MCFSIM_DBAR0 0x50 /* SDRAM base address 0 */ +#define MCFSIM_DMR0 0x54 /* SDRAM address mask 0 */ +#define MCFSIM_DBAR1 0x58 /* SDRAM base address 1 */ +#define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */ +#endif + +/* + * GPIO pins setups to enable the UARTs. + */ +#ifdef CONFIG_M5271 +#define MCF_GPIO_PAR_UART 0x100048 /* PAR UART address */ +#define UART0_ENABLE_MASK 0x000f +#define UART1_ENABLE_MASK 0x0ff0 +#define UART2_ENABLE_MASK 0x3000 +#endif +#ifdef CONFIG_M5275 +#define MCF_GPIO_PAR_UART 0x10007c /* PAR UART address */ +#define UART0_ENABLE_MASK 0x000f +#define UART1_ENABLE_MASK 0x00f0 +#define UART2_ENABLE_MASK 0x3f00 +#endif + +/****************************************************************************/ +#endif /* m527xsim_h */ |
