summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-s5pc100
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-s5pc100')
-rw-r--r--arch/arm/mach-s5pc100/Kconfig16
-rw-r--r--arch/arm/mach-s5pc100/Makefile4
-rw-r--r--arch/arm/mach-s5pc100/cpu.c29
-rw-r--r--arch/arm/mach-s5pc100/include/mach/gpio.h230
-rw-r--r--arch/arm/mach-s5pc100/include/mach/irqs.h5
-rw-r--r--arch/arm/mach-s5pc100/include/mach/map.h87
-rw-r--r--arch/arm/mach-s5pc100/include/mach/regs-fb.h139
-rw-r--r--arch/arm/mach-s5pc100/include/mach/system.h13
-rw-r--r--arch/arm/mach-s5pc100/mach-smdkc100.c89
-rw-r--r--arch/arm/mach-s5pc100/setup-sdhci.c65
10 files changed, 558 insertions, 119 deletions
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index b1a4ba504416..27ec167d2808 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s5pc100/Kconfig
-#
# Copyright 2009 Samsung Electronics Co.
# Byungho Min <bhmin@samsung.com>
#
@@ -14,9 +12,23 @@ config CPU_S5PC100
help
Enable S5PC100 CPU support
+config S5PC100_SETUP_SDHCI
+ bool
+ select S5PC1XX_SETUP_SDHCI_GPIO
+ help
+ Internal helper functions for S5PC100 based SDHCI systems
+
config MACH_SMDKC100
bool "SMDKC100"
select CPU_S5PC100
+ select S3C_DEV_FB
+ select S3C_DEV_I2C1
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
+ select S5PC1XX_SETUP_I2C0
select S5PC1XX_SETUP_I2C1
+ select S5PC1XX_SETUP_FB_24BPP
+ select S5PC100_SETUP_SDHCI
help
Machine support for the Samsung SMDKC100
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
index afc89b381d7a..809ff10f768f 100644
--- a/arch/arm/mach-s5pc100/Makefile
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -13,5 +13,9 @@ obj- :=
obj-$(CONFIG_CPU_S5PC100) += cpu.o
+# Helper and device support
+
+obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o
+
# machine support
obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
index 0e718890da32..d79e7574a852 100644
--- a/arch/arm/mach-s5pc100/cpu.c
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -22,6 +22,8 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <asm/proc-fns.h>
+
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
@@ -32,6 +34,7 @@
#include <plat/cpu-freq.h>
#include <plat/regs-serial.h>
+#include <plat/regs-power.h>
#include <plat/cpu.h>
#include <plat/devs.h>
@@ -45,6 +48,23 @@
static struct map_desc s5pc100_iodesc[] __initdata = {
};
+static void s5pc100_idle(void)
+{
+ unsigned long tmp;
+
+ tmp = __raw_readl(S5PC100_PWR_CFG);
+ tmp &= ~S5PC100_PWRCFG_CFG_DEEP_IDLE;
+ tmp &= ~S5PC100_PWRCFG_CFG_WFI_MASK;
+ tmp |= S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE;
+ __raw_writel(tmp, S5PC100_PWR_CFG);
+
+ tmp = __raw_readl(S5PC100_OTHERS);
+ tmp |= S5PC100_PMU_INT_DISABLE;
+ __raw_writel(tmp, S5PC100_OTHERS);
+
+ cpu_do_idle();
+}
+
/* s5pc100_map_io
*
* register the standard cpu IO areas
@@ -55,6 +75,13 @@ void __init s5pc100_map_io(void)
iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
/* initialise device information early */
+ s5pc100_default_sdhci0();
+ s5pc100_default_sdhci1();
+ s5pc100_default_sdhci2();
+
+ /* the i2c devices are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+ s3c_i2c1_setname("s3c2440-i2c");
}
void __init s5pc100_init_clocks(int xtal)
@@ -93,5 +120,7 @@ int __init s5pc100_init(void)
{
printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
+ s5pc1xx_idle = s5pc100_idle;
+
return sysdev_register(&s5pc100_sysdev);
}
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
index c74fc93d7d15..2c4cbe8ee6b7 100644
--- a/arch/arm/mach-s5pc100/include/mach/gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -18,40 +18,45 @@
#define gpio_to_irq __gpio_to_irq
/* GPIO bank sizes */
-#define S5PC1XX_GPIO_A0_NR (8)
-#define S5PC1XX_GPIO_A1_NR (5)
-#define S5PC1XX_GPIO_B_NR (8)
-#define S5PC1XX_GPIO_C_NR (5)
-#define S5PC1XX_GPIO_D_NR (7)
-#define S5PC1XX_GPIO_E0_NR (8)
-#define S5PC1XX_GPIO_E1_NR (6)
-#define S5PC1XX_GPIO_F0_NR (8)
-#define S5PC1XX_GPIO_F1_NR (8)
-#define S5PC1XX_GPIO_F2_NR (8)
-#define S5PC1XX_GPIO_F3_NR (4)
-#define S5PC1XX_GPIO_G0_NR (8)
-#define S5PC1XX_GPIO_G1_NR (3)
-#define S5PC1XX_GPIO_G2_NR (7)
-#define S5PC1XX_GPIO_G3_NR (7)
-#define S5PC1XX_GPIO_H0_NR (8)
-#define S5PC1XX_GPIO_H1_NR (8)
-#define S5PC1XX_GPIO_H2_NR (8)
-#define S5PC1XX_GPIO_H3_NR (8)
-#define S5PC1XX_GPIO_I_NR (8)
-#define S5PC1XX_GPIO_J0_NR (8)
-#define S5PC1XX_GPIO_J1_NR (5)
-#define S5PC1XX_GPIO_J2_NR (8)
-#define S5PC1XX_GPIO_J3_NR (8)
-#define S5PC1XX_GPIO_J4_NR (4)
-#define S5PC1XX_GPIO_K0_NR (8)
-#define S5PC1XX_GPIO_K1_NR (6)
-#define S5PC1XX_GPIO_K2_NR (8)
-#define S5PC1XX_GPIO_K3_NR (8)
-#define S5PC1XX_GPIO_MP00_NR (8)
-#define S5PC1XX_GPIO_MP01_NR (8)
-#define S5PC1XX_GPIO_MP02_NR (8)
-#define S5PC1XX_GPIO_MP03_NR (8)
-#define S5PC1XX_GPIO_MP04_NR (5)
+#define S5PC100_GPIO_A0_NR (8)
+#define S5PC100_GPIO_A1_NR (5)
+#define S5PC100_GPIO_B_NR (8)
+#define S5PC100_GPIO_C_NR (5)
+#define S5PC100_GPIO_D_NR (7)
+#define S5PC100_GPIO_E0_NR (8)
+#define S5PC100_GPIO_E1_NR (6)
+#define S5PC100_GPIO_F0_NR (8)
+#define S5PC100_GPIO_F1_NR (8)
+#define S5PC100_GPIO_F2_NR (8)
+#define S5PC100_GPIO_F3_NR (4)
+#define S5PC100_GPIO_G0_NR (8)
+#define S5PC100_GPIO_G1_NR (3)
+#define S5PC100_GPIO_G2_NR (7)
+#define S5PC100_GPIO_G3_NR (7)
+#define S5PC100_GPIO_H0_NR (8)
+#define S5PC100_GPIO_H1_NR (8)
+#define S5PC100_GPIO_H2_NR (8)
+#define S5PC100_GPIO_H3_NR (8)
+#define S5PC100_GPIO_I_NR (8)
+#define S5PC100_GPIO_J0_NR (8)
+#define S5PC100_GPIO_J1_NR (5)
+#define S5PC100_GPIO_J2_NR (8)
+#define S5PC100_GPIO_J3_NR (8)
+#define S5PC100_GPIO_J4_NR (4)
+#define S5PC100_GPIO_K0_NR (8)
+#define S5PC100_GPIO_K1_NR (6)
+#define S5PC100_GPIO_K2_NR (8)
+#define S5PC100_GPIO_K3_NR (8)
+#define S5PC100_GPIO_L0_NR (8)
+#define S5PC100_GPIO_L1_NR (8)
+#define S5PC100_GPIO_L2_NR (8)
+#define S5PC100_GPIO_L3_NR (8)
+#define S5PC100_GPIO_L4_NR (8)
+#define S5PC100_GPIO_MP00_NR (8)
+#define S5PC100_GPIO_MP01_NR (8)
+#define S5PC100_GPIO_MP02_NR (8)
+#define S5PC100_GPIO_MP03_NR (8)
+#define S5PC100_GPIO_MP04_NR (5)
/* GPIO bank numbes */
@@ -64,83 +69,94 @@
((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
enum s3c_gpio_number {
- S5PC1XX_GPIO_A0_START = 0,
- S5PC1XX_GPIO_A1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A0),
- S5PC1XX_GPIO_B_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A1),
- S5PC1XX_GPIO_C_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_B),
- S5PC1XX_GPIO_D_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_C),
- S5PC1XX_GPIO_E0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_D),
- S5PC1XX_GPIO_E1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E0),
- S5PC1XX_GPIO_F0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E1),
- S5PC1XX_GPIO_F1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F0),
- S5PC1XX_GPIO_F2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F1),
- S5PC1XX_GPIO_F3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F2),
- S5PC1XX_GPIO_G0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F3),
- S5PC1XX_GPIO_G1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G0),
- S5PC1XX_GPIO_G2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G1),
- S5PC1XX_GPIO_G3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G2),
- S5PC1XX_GPIO_H0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G3),
- S5PC1XX_GPIO_H1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H0),
- S5PC1XX_GPIO_H2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H1),
- S5PC1XX_GPIO_H3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H2),
- S5PC1XX_GPIO_I_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H3),
- S5PC1XX_GPIO_J0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_I),
- S5PC1XX_GPIO_J1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J0),
- S5PC1XX_GPIO_J2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J1),
- S5PC1XX_GPIO_J3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J2),
- S5PC1XX_GPIO_J4_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J3),
- S5PC1XX_GPIO_K0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J4),
- S5PC1XX_GPIO_K1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K0),
- S5PC1XX_GPIO_K2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K1),
- S5PC1XX_GPIO_K3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K2),
- S5PC1XX_GPIO_MP00_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K3),
- S5PC1XX_GPIO_MP01_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP00),
- S5PC1XX_GPIO_MP02_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP01),
- S5PC1XX_GPIO_MP03_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP02),
- S5PC1XX_GPIO_MP04_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP03),
+ S5PC100_GPIO_A0_START = 0,
+ S5PC100_GPIO_A1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A0),
+ S5PC100_GPIO_B_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A1),
+ S5PC100_GPIO_C_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_B),
+ S5PC100_GPIO_D_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_C),
+ S5PC100_GPIO_E0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_D),
+ S5PC100_GPIO_E1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E0),
+ S5PC100_GPIO_F0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E1),
+ S5PC100_GPIO_F1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F0),
+ S5PC100_GPIO_F2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F1),
+ S5PC100_GPIO_F3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F2),
+ S5PC100_GPIO_G0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F3),
+ S5PC100_GPIO_G1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G0),
+ S5PC100_GPIO_G2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G1),
+ S5PC100_GPIO_G3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G2),
+ S5PC100_GPIO_H0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G3),
+ S5PC100_GPIO_H1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H0),
+ S5PC100_GPIO_H2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H1),
+ S5PC100_GPIO_H3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H2),
+ S5PC100_GPIO_I_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H3),
+ S5PC100_GPIO_J0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_I),
+ S5PC100_GPIO_J1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J0),
+ S5PC100_GPIO_J2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J1),
+ S5PC100_GPIO_J3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J2),
+ S5PC100_GPIO_J4_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J3),
+ S5PC100_GPIO_K0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J4),
+ S5PC100_GPIO_K1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K0),
+ S5PC100_GPIO_K2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K1),
+ S5PC100_GPIO_K3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K2),
+ S5PC100_GPIO_L0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K3),
+ S5PC100_GPIO_L1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L0),
+ S5PC100_GPIO_L2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L1),
+ S5PC100_GPIO_L3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L2),
+ S5PC100_GPIO_L4_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L3),
+ S5PC100_GPIO_MP00_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L4),
+ S5PC100_GPIO_MP01_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP00),
+ S5PC100_GPIO_MP02_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP01),
+ S5PC100_GPIO_MP03_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP02),
+ S5PC100_GPIO_MP04_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP03),
+ S5PC100_GPIO_END = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP04),
};
-/* S5PC1XX GPIO number definitions. */
-#define S5PC1XX_GPA0(_nr) (S5PC1XX_GPIO_A0_START + (_nr))
-#define S5PC1XX_GPA1(_nr) (S5PC1XX_GPIO_A1_START + (_nr))
-#define S5PC1XX_GPB(_nr) (S5PC1XX_GPIO_B_START + (_nr))
-#define S5PC1XX_GPC(_nr) (S5PC1XX_GPIO_C_START + (_nr))
-#define S5PC1XX_GPD(_nr) (S5PC1XX_GPIO_D_START + (_nr))
-#define S5PC1XX_GPE0(_nr) (S5PC1XX_GPIO_E0_START + (_nr))
-#define S5PC1XX_GPE1(_nr) (S5PC1XX_GPIO_E1_START + (_nr))
-#define S5PC1XX_GPF0(_nr) (S5PC1XX_GPIO_F0_START + (_nr))
-#define S5PC1XX_GPF1(_nr) (S5PC1XX_GPIO_F1_START + (_nr))
-#define S5PC1XX_GPF2(_nr) (S5PC1XX_GPIO_F2_START + (_nr))
-#define S5PC1XX_GPF3(_nr) (S5PC1XX_GPIO_F3_START + (_nr))
-#define S5PC1XX_GPG0(_nr) (S5PC1XX_GPIO_G0_START + (_nr))
-#define S5PC1XX_GPG1(_nr) (S5PC1XX_GPIO_G1_START + (_nr))
-#define S5PC1XX_GPG2(_nr) (S5PC1XX_GPIO_G2_START + (_nr))
-#define S5PC1XX_GPG3(_nr) (S5PC1XX_GPIO_G3_START + (_nr))
-#define S5PC1XX_GPH0(_nr) (S5PC1XX_GPIO_H0_START + (_nr))
-#define S5PC1XX_GPH1(_nr) (S5PC1XX_GPIO_H1_START + (_nr))
-#define S5PC1XX_GPH2(_nr) (S5PC1XX_GPIO_H2_START + (_nr))
-#define S5PC1XX_GPH3(_nr) (S5PC1XX_GPIO_H3_START + (_nr))
-#define S5PC1XX_GPI(_nr) (S5PC1XX_GPIO_I_START + (_nr))
-#define S5PC1XX_GPJ0(_nr) (S5PC1XX_GPIO_J0_START + (_nr))
-#define S5PC1XX_GPJ1(_nr) (S5PC1XX_GPIO_J1_START + (_nr))
-#define S5PC1XX_GPJ2(_nr) (S5PC1XX_GPIO_J2_START + (_nr))
-#define S5PC1XX_GPJ3(_nr) (S5PC1XX_GPIO_J3_START + (_nr))
-#define S5PC1XX_GPJ4(_nr) (S5PC1XX_GPIO_J4_START + (_nr))
-#define S5PC1XX_GPK0(_nr) (S5PC1XX_GPIO_K0_START + (_nr))
-#define S5PC1XX_GPK1(_nr) (S5PC1XX_GPIO_K1_START + (_nr))
-#define S5PC1XX_GPK2(_nr) (S5PC1XX_GPIO_K2_START + (_nr))
-#define S5PC1XX_GPK3(_nr) (S5PC1XX_GPIO_K3_START + (_nr))
-#define S5PC1XX_MP00(_nr) (S5PC1XX_GPIO_MP00_START + (_nr))
-#define S5PC1XX_MP01(_nr) (S5PC1XX_GPIO_MP01_START + (_nr))
-#define S5PC1XX_MP02(_nr) (S5PC1XX_GPIO_MP02_START + (_nr))
-#define S5PC1XX_MP03(_nr) (S5PC1XX_GPIO_MP03_START + (_nr))
-#define S5PC1XX_MP04(_nr) (S5PC1XX_GPIO_MP04_START + (_nr))
+/* S5PC100 GPIO number definitions. */
+#define S5PC100_GPA0(_nr) (S5PC100_GPIO_A0_START + (_nr))
+#define S5PC100_GPA1(_nr) (S5PC100_GPIO_A1_START + (_nr))
+#define S5PC100_GPB(_nr) (S5PC100_GPIO_B_START + (_nr))
+#define S5PC100_GPC(_nr) (S5PC100_GPIO_C_START + (_nr))
+#define S5PC100_GPD(_nr) (S5PC100_GPIO_D_START + (_nr))
+#define S5PC100_GPE0(_nr) (S5PC100_GPIO_E0_START + (_nr))
+#define S5PC100_GPE1(_nr) (S5PC100_GPIO_E1_START + (_nr))
+#define S5PC100_GPF0(_nr) (S5PC100_GPIO_F0_START + (_nr))
+#define S5PC100_GPF1(_nr) (S5PC100_GPIO_F1_START + (_nr))
+#define S5PC100_GPF2(_nr) (S5PC100_GPIO_F2_START + (_nr))
+#define S5PC100_GPF3(_nr) (S5PC100_GPIO_F3_START + (_nr))
+#define S5PC100_GPG0(_nr) (S5PC100_GPIO_G0_START + (_nr))
+#define S5PC100_GPG1(_nr) (S5PC100_GPIO_G1_START + (_nr))
+#define S5PC100_GPG2(_nr) (S5PC100_GPIO_G2_START + (_nr))
+#define S5PC100_GPG3(_nr) (S5PC100_GPIO_G3_START + (_nr))
+#define S5PC100_GPH0(_nr) (S5PC100_GPIO_H0_START + (_nr))
+#define S5PC100_GPH1(_nr) (S5PC100_GPIO_H1_START + (_nr))
+#define S5PC100_GPH2(_nr) (S5PC100_GPIO_H2_START + (_nr))
+#define S5PC100_GPH3(_nr) (S5PC100_GPIO_H3_START + (_nr))
+#define S5PC100_GPI(_nr) (S5PC100_GPIO_I_START + (_nr))
+#define S5PC100_GPJ0(_nr) (S5PC100_GPIO_J0_START + (_nr))
+#define S5PC100_GPJ1(_nr) (S5PC100_GPIO_J1_START + (_nr))
+#define S5PC100_GPJ2(_nr) (S5PC100_GPIO_J2_START + (_nr))
+#define S5PC100_GPJ3(_nr) (S5PC100_GPIO_J3_START + (_nr))
+#define S5PC100_GPJ4(_nr) (S5PC100_GPIO_J4_START + (_nr))
+#define S5PC100_GPK0(_nr) (S5PC100_GPIO_K0_START + (_nr))
+#define S5PC100_GPK1(_nr) (S5PC100_GPIO_K1_START + (_nr))
+#define S5PC100_GPK2(_nr) (S5PC100_GPIO_K2_START + (_nr))
+#define S5PC100_GPK3(_nr) (S5PC100_GPIO_K3_START + (_nr))
+#define S5PC100_GPL0(_nr) (S5PC100_GPIO_L0_START + (_nr))
+#define S5PC100_GPL1(_nr) (S5PC100_GPIO_L1_START + (_nr))
+#define S5PC100_GPL2(_nr) (S5PC100_GPIO_L2_START + (_nr))
+#define S5PC100_GPL3(_nr) (S5PC100_GPIO_L3_START + (_nr))
+#define S5PC100_GPL4(_nr) (S5PC100_GPIO_L4_START + (_nr))
+#define S5PC100_MP00(_nr) (S5PC100_GPIO_MP00_START + (_nr))
+#define S5PC100_MP01(_nr) (S5PC100_GPIO_MP01_START + (_nr))
+#define S5PC100_MP02(_nr) (S5PC100_GPIO_MP02_START + (_nr))
+#define S5PC100_MP03(_nr) (S5PC100_GPIO_MP03_START + (_nr))
+#define S5PC100_MP04(_nr) (S5PC100_GPIO_MP04_START + (_nr))
+#define S5PC100_MP05(_nr) (S5PC100_GPIO_MP05_START + (_nr))
-/* the end of the S5PC1XX specific gpios */
-#define S5PC1XX_GPIO_END (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
-#define S3C_GPIO_END S5PC1XX_GPIO_END
+/* It used the end of the S5PC1XX gpios */
+#define S3C_GPIO_END S5PC100_GPIO_END
/* define the number of gpios we need to the one after the MP04() range */
-#define ARCH_NR_GPIOS (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+#define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1)
#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index 622720dba289..b53fa48a52c6 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -11,4 +11,9 @@
#include <plat/irqs.h>
+/* LCD */
+#define IRQ_LCD_FIFO IRQ_LCD0
+#define IRQ_LCD_VSYNC IRQ_LCD1
+#define IRQ_LCD_SYSTEM IRQ_LCD2
+
#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index 9e9f39130b2c..4681ebe8bef6 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -17,6 +17,19 @@
#include <plat/map-base.h>
+/*
+ * map-base.h has already defined virtual memory address
+ * S3C_VA_IRQ S3C_ADDR(0x00000000) irq controller(s)
+ * S3C_VA_SYS S3C_ADDR(0x00100000) system control
+ * S3C_VA_MEM S3C_ADDR(0x00200000) system control (not used)
+ * S3C_VA_TIMER S3C_ADDR(0x00300000) timer block
+ * S3C_VA_WATCHDOG S3C_ADDR(0x00400000) watchdog
+ * S3C_VA_UART S3C_ADDR(0x01000000) UART
+ *
+ * S5PC100 specific virtual memory address can be defined here
+ * S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) GPIO
+ *
+ */
/* Chip ID */
#define S5PC100_PA_CHIPID (0xE0000000)
@@ -24,13 +37,20 @@
#define S5PC1XX_VA_CHIPID S3C_VA_SYS
/* System */
-#define S5PC100_PA_SYS (0xE0100000)
-#define S5PC100_PA_CLK (S5PC100_PA_SYS + 0x0)
-#define S5PC100_PA_PWR (S5PC100_PA_SYS + 0x8000)
+#define S5PC100_PA_CLK (0xE0100000)
+#define S5PC100_PA_CLK_OTHER (0xE0200000)
+#define S5PC100_PA_PWR (0xE0108000)
#define S5PC1XX_PA_CLK S5PC100_PA_CLK
#define S5PC1XX_PA_PWR S5PC100_PA_PWR
+#define S5PC1XX_PA_CLK_OTHER S5PC100_PA_CLK_OTHER
#define S5PC1XX_VA_CLK (S3C_VA_SYS + 0x10000)
#define S5PC1XX_VA_PWR (S3C_VA_SYS + 0x20000)
+#define S5PC1XX_VA_CLK_OTHER (S3C_VA_SYS + 0x30000)
+
+/* GPIO */
+#define S5PC100_PA_GPIO (0xE0300000)
+#define S5PC1XX_PA_GPIO S5PC100_PA_GPIO
+#define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000)
/* Interrupt */
#define S5PC100_PA_VIC (0xE4000000)
@@ -40,23 +60,64 @@
#define S5PC1XX_PA_VIC(x) (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
#define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+/* DMA */
+#define S5PC100_PA_MDMA (0xE8100000)
+#define S5PC100_PA_PDMA0 (0xE9000000)
+#define S5PC100_PA_PDMA1 (0xE9200000)
+
/* Timer */
#define S5PC100_PA_TIMER (0xEA000000)
#define S5PC1XX_PA_TIMER S5PC100_PA_TIMER
#define S5PC1XX_VA_TIMER S3C_VA_TIMER
+/* RTC */
+#define S5PC100_PA_RTC (0xEA300000)
+
/* UART */
#define S5PC100_PA_UART (0xEC000000)
#define S5PC1XX_PA_UART S5PC100_PA_UART
#define S5PC1XX_VA_UART S3C_VA_UART
-/* IIC */
-#define S5PC100_PA_IIC (0xEC100000)
+/* I2C */
+#define S5PC100_PA_I2C (0xEC100000)
+#define S5PC100_PA_I2C1 (0xEC200000)
+
+/* USB HS OTG */
+#define S5PC100_PA_USB_HSOTG (0xED200000)
+#define S5PC100_PA_USB_HSPHY (0xED300000)
+
+/* SD/MMC */
+#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
+#define S5PC100_PA_HSMMC0 S5PC100_PA_HSMMC(0)
+#define S5PC100_PA_HSMMC1 S5PC100_PA_HSMMC(1)
+#define S5PC100_PA_HSMMC2 S5PC100_PA_HSMMC(2)
+
+/* LCD */
+#define S5PC100_PA_FB (0xEE000000)
+
+/* Multimedia */
+#define S5PC100_PA_G2D (0xEE800000)
+#define S5PC100_PA_JPEG (0xEE500000)
+#define S5PC100_PA_ROTATOR (0xEE100000)
+#define S5PC100_PA_G3D (0xEF000000)
+
+/* I2S */
+#define S5PC100_PA_I2S0 (0xF2000000)
+#define S5PC100_PA_I2S1 (0xF2100000)
+#define S5PC100_PA_I2S2 (0xF2200000)
+
+/* KEYPAD */
+#define S5PC100_PA_KEYPAD (0xF3100000)
+
+/* ADC & TouchScreen */
+#define S5PC100_PA_TSADC (0xF3000000)
/* ETC */
#define S5PC100_PA_SDRAM (0x20000000)
+#define S5PC1XX_PA_SDRAM S5PC100_PA_SDRAM
/* compatibility defines. */
+#define S3C_PA_RTC S5PC100_PA_RTC
#define S3C_PA_UART S5PC100_PA_UART
#define S3C_PA_UART0 (S5PC100_PA_UART + 0x0)
#define S3C_PA_UART1 (S5PC100_PA_UART + 0x400)
@@ -67,9 +128,23 @@
#define S3C_VA_UART2 (S3C_VA_UART + 0x800)
#define S3C_VA_UART3 (S3C_VA_UART + 0xC00)
#define S3C_UART_OFFSET 0x400
+#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S3C_PA_FB S5PC100_PA_FB
+#define S3C_PA_G2D S5PC100_PA_G2D
+#define S3C_PA_G3D S5PC100_PA_G3D
+#define S3C_PA_JPEG S5PC100_PA_JPEG
+#define S3C_PA_ROTATOR S5PC100_PA_ROTATOR
#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x0)
#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000)
#define S3C_VA_VIC2 (S3C_VA_IRQ + 0x20000)
-#define S3C_PA_IIC S5PC100_PA_IIC
+#define S3C_PA_IIC S5PC100_PA_I2C
+#define S3C_PA_IIC1 S5PC100_PA_I2C1
+#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG
+#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY
+#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC0
+#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC1
+#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC2
+#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD
+#define S3C_PA_TSADC S5PC100_PA_TSADC
#endif /* __ASM_ARCH_C100_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-fb.h b/arch/arm/mach-s5pc100/include/mach/regs-fb.h
new file mode 100644
index 000000000000..1732cd28c765
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/regs-fb.h
@@ -0,0 +1,139 @@
+/* arch/arm/mach-s5pc100/include/mach/regs-fb.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Pawel Osciak <p.osciak@samsung.com>
+ *
+ * Framebuffer register definitions for Samsung S5PC100.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_FB_H
+#define __ASM_ARCH_REGS_FB_H __FILE__
+
+#include <plat/regs-fb-v4.h>
+
+/* VP1 interface timing control */
+#define VP1CON0 (0x118)
+#define VP1_RATECON_EN (1 << 31)
+#define VP1_CLKRATE_MASK (0xff)
+
+#define VP1CON1 (0x11c)
+#define VP1_VTREGCON_EN (1 << 31)
+#define VP1_VBPD_MASK (0xfff)
+#define VP1_VBPD_SHIFT (16)
+
+
+#define WPALCON_H (0x19c)
+#define WPALCON_L (0x1a0)
+
+/* Pallete contro for WPAL0 and WPAL1 is the same as in S3C64xx, but
+ * different for WPAL2-4
+ */
+/* In WPALCON_L (aka WPALCON) */
+#define WPALCON_W1PAL_32BPP_A888 (0x7 << 3)
+#define WPALCON_W0PAL_32BPP_A888 (0x7 << 0)
+
+/* To set W2PAL-W4PAL consist of one bit from WPALCON_L and two from WPALCON_H,
+ * e.g. W2PAL[2..0] is made of (WPALCON_H[10..9], WPALCON_L[6]).
+ */
+#define WPALCON_L_WxPAL_L_MASK (0x1)
+#define WPALCON_L_W2PAL_L_SHIFT (6)
+#define WPALCON_L_W3PAL_L_SHIFT (7)
+#define WPALCON_L_W4PAL_L_SHIFT (8)
+
+#define WPALCON_L_WxPAL_H_MASK (0x3)
+#define WPALCON_H_W2PAL_H_SHIFT (9)
+#define WPALCON_H_W3PAL_H_SHIFT (13)
+#define WPALCON_H_W4PAL_H_SHIFT (17)
+
+/* Per-window alpha value registers */
+/* For window 0 8-bit alpha values are in VIDW0ALPHAx,
+ * for windows 1-4 alpha values consist of two parts, the 4 low bits are
+ * taken from VIDWxALPHAx and 4 high bits are from VIDOSDxC,
+ * e.g. WIN1_ALPHA0_B[7..0] = (VIDOSD1C[3..0], VIDW1ALPHA0[3..0])
+ */
+#define VIDWxALPHA0(_win) (0x200 + (_win * 8))
+#define VIDWxALPHA1(_win) (0x204 + (_win * 8))
+
+/* Only for window 0 in VIDW0ALPHAx. */
+#define VIDW0ALPHAx_R(_x) ((_x) << 16)
+#define VIDW0ALPHAx_R_MASK (0xff << 16)
+#define VIDW0ALPHAx_R_SHIFT (16)
+#define VIDW0ALPHAx_G(_x) ((_x) << 8)
+#define VIDW0ALPHAx_G_MASK (0xff << 8)
+#define VIDW0ALPHAx_G_SHIFT (8)
+#define VIDW0ALPHAx_B(_x) ((_x) << 0)
+#define VIDW0ALPHAx_B_MASK (0xff << 0)
+#define VIDW0ALPHAx_B_SHIFT (0)
+
+/* Low 4 bits of alpha0-1 for windows 1-4 */
+#define VIDW14ALPHAx_R_L(_x) ((_x) << 16)
+#define VIDW14ALPHAx_R_L_MASK (0xf << 16)
+#define VIDW14ALPHAx_R_L_SHIFT (16)
+#define VIDW14ALPHAx_G_L(_x) ((_x) << 8)
+#define VIDW14ALPHAx_G_L_MASK (0xf << 8)
+#define VIDW14ALPHAx_G_L_SHIFT (8)
+#define VIDW14ALPHAx_B_L(_x) ((_x) << 0)
+#define VIDW14ALPHAx_B_L_MASK (0xf << 0)
+#define VIDW14ALPHAx_B_L_SHIFT (0)
+
+
+/* Per-window blending equation control registers */
+#define BLENDEQx(_win) (0x244 + ((_win) * 4))
+#define BLENDEQ1 (0x244)
+#define BLENDEQ2 (0x248)
+#define BLENDEQ3 (0x24c)
+#define BLENDEQ4 (0x250)
+
+#define BLENDEQx_Q_FUNC(_x) ((_x) << 18)
+#define BLENDEQx_Q_FUNC_MASK (0xf << 18)
+#define BLENDEQx_P_FUNC(_x) ((_x) << 12)
+#define BLENDEQx_P_FUNC_MASK (0xf << 12)
+#define BLENDEQx_B_FUNC(_x) ((_x) << 6)
+#define BLENDEQx_B_FUNC_MASK (0xf << 6)
+#define BLENDEQx_A_FUNC(_x) ((_x) << 0)
+#define BLENDEQx_A_FUNC_MASK (0xf << 0)
+
+#define BLENDCON (0x260)
+#define BLENDCON_8BIT_ALPHA (1 << 0)
+
+/* Per-window palette base addresses (start of palette memory).
+ * Each window palette area consists of 256 32-bit entries.
+ * START is the first address (entry 0th), END is the address of 255th entry.
+ */
+#define WIN0_PAL_BASE (0x2400)
+#define WIN0_PAL_END (0x27fc)
+#define WIN1_PAL_BASE (0x2800)
+#define WIN1_PAL_END (0x2bfc)
+#define WIN2_PAL_BASE (0x2c00)
+#define WIN2_PAL_END (0x2ffc)
+#define WIN3_PAL_BASE (0x3000)
+#define WIN3_PAL_END (0x33fc)
+#define WIN4_PAL_BASE (0x3400)
+#define WIN4_PAL_END (0x37fc)
+
+#define WIN0_PAL(_entry) (WIN0_PAL_BASE + ((_entry) * 4))
+#define WIN1_PAL(_entry) (WIN1_PAL_BASE + ((_entry) * 4))
+#define WIN2_PAL(_entry) (WIN2_PAL_BASE + ((_entry) * 4))
+#define WIN3_PAL(_entry) (WIN3_PAL_BASE + ((_entry) * 4))
+#define WIN4_PAL(_entry) (WIN4_PAL_BASE + ((_entry) * 4))
+
+static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
+{
+ switch (window) {
+ case 0: return WIN0_PAL(reg);
+ case 1: return WIN1_PAL(reg);
+ case 2: return WIN2_PAL(reg);
+ case 3: return WIN3_PAL(reg);
+ case 4: return WIN4_PAL(reg);
+ }
+
+ BUG();
+}
+
+
+#endif /* __ASM_ARCH_REGS_FB_H */
+
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
index e39014375470..f0d31a2a598c 100644
--- a/arch/arm/mach-s5pc100/include/mach/system.h
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -11,14 +11,21 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
+#include <linux/io.h>
+#include <mach/map.h>
+#include <plat/regs-clock.h>
+
+void (*s5pc1xx_idle)(void);
+
static void arch_idle(void)
{
- /* nothing here yet */
+ if (s5pc1xx_idle)
+ s5pc1xx_idle();
}
static void arch_reset(char mode, const char *cmd)
{
- /* nothing here yet */
+ __raw_writel(S5PC100_SWRESET_RESETVAL, S5PC100_SWRESET);
+ return;
}
-
#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 214093cd7632..ae3c52cd0ebb 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -27,16 +27,22 @@
#include <asm/mach/map.h>
#include <mach/map.h>
+#include <mach/regs-fb.h>
+#include <video/platform_lcd.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-gpio.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/s5pc100.h>
+#include <plat/fb.h>
+#include <plat/iic.h>
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
@@ -73,9 +79,78 @@ static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
},
};
+/* I2C0 */
+static struct i2c_board_info i2c_devs0[] __initdata = {
+};
+
+/* I2C1 */
+static struct i2c_board_info i2c_devs1[] __initdata = {
+};
+
+/* LCD power controller */
+static void smdkc100_lcd_power_set(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ /* backlight */
+ gpio_direction_output(S5PC100_GPD(0), power);
+
+ if (power) {
+ /* module reset */
+ gpio_direction_output(S5PC100_GPH0(6), 1);
+ mdelay(100);
+ gpio_direction_output(S5PC100_GPH0(6), 0);
+ mdelay(10);
+ gpio_direction_output(S5PC100_GPH0(6), 1);
+ mdelay(10);
+ }
+}
+
+static struct plat_lcd_data smdkc100_lcd_power_data = {
+ .set_power = smdkc100_lcd_power_set,
+};
+
+static struct platform_device smdkc100_lcd_powerdev = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &smdkc100_lcd_power_data,
+};
+
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdkc100_fb_win0 = {
+ /* this is to ensure we use win0 */
+ .win_mode = {
+ .refresh = 70,
+ .pixclock = (8+13+3+800)*(7+5+1+480),
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = {
+ .win[0] = &smdkc100_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = s5pc100_fb_gpio_setup_24bpp,
+};
+
static struct map_desc smdkc100_iodesc[] = {};
static struct platform_device *smdkc100_devices[] __initdata = {
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
+ &s3c_device_fb,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
+ &smdkc100_lcd_powerdev,
};
static void __init smdkc100_map_io(void)
@@ -87,12 +162,24 @@ static void __init smdkc100_map_io(void)
static void __init smdkc100_machine_init(void)
{
+ /* I2C */
+ s3c_i2c0_set_platdata(NULL);
+ s3c_i2c1_set_platdata(NULL);
+ i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+ i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+ s3c_fb_set_platdata(&smdkc100_lcd_pdata);
+
+ /* LCD init */
+ gpio_request(S5PC100_GPD(0), "GPD");
+ gpio_request(S5PC100_GPH0(6), "GPH0");
+ smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
}
MACHINE_START(SMDKC100, "SMDKC100")
/* Maintainer: Byungho Min <bhmin@samsung.com> */
- .phys_io = S5PC1XX_PA_UART & 0xfff00000,
+ .phys_io = S5PC100_PA_UART & 0xfff00000,
.io_pg_offst = (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S5PC100_PA_SDRAM + 0x100,
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
new file mode 100644
index 000000000000..4385986a3da0
--- /dev/null
+++ b/arch/arm/mach-s5pc100/setup-sdhci.c
@@ -0,0 +1,65 @@
+/* linux/arch/arm/mach-s5pc100/setup-sdhci.c
+ *
+ * Copyright 2008 Samsung Electronics
+ *
+ * S5PC100 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * Based on mach-s3c6410/setup-sdhci.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s5pc100_hsmmc_clksrcs[4] = {
+ [0] = "hsmmc",
+ [1] = "hsmmc",
+ /* [2] = "mmc_bus", not yet succesfuuly used yet */
+ /* [3] = "48m", - note not succesfully used yet */
+};
+
+
+void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card)
+{
+ u32 ctrl2, ctrl3;
+
+ /* don't need to alter anything acording to card-type */
+
+ writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+ ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+ ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+ ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+ S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+ S3C_SDHCI_CTRL2_ENFBCLKRX |
+ S3C_SDHCI_CTRL2_DFCNT_NONE |
+ S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+ if (ios->clock < 25 * 1000000)
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+ S3C_SDHCI_CTRL3_FCSEL2 |
+ S3C_SDHCI_CTRL3_FCSEL1 |
+ S3C_SDHCI_CTRL3_FCSEL0);
+ else
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+ writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+ writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
OpenPOWER on IntegriCloud