diff options
Diffstat (limited to 'arch/arm/mach-realview/include')
| -rw-r--r-- | arch/arm/mach-realview/include/mach/board-eb.h | 18 | ||||
| -rw-r--r-- | arch/arm/mach-realview/include/mach/board-pb11mp.h | 3 | ||||
| -rw-r--r-- | arch/arm/mach-realview/include/mach/board-pba8.h | 152 | ||||
| -rw-r--r-- | arch/arm/mach-realview/include/mach/clkdev.h | 7 | ||||
| -rw-r--r-- | arch/arm/mach-realview/include/mach/debug-macro.S | 29 | ||||
| -rw-r--r-- | arch/arm/mach-realview/include/mach/dma.h | 20 | ||||
| -rw-r--r-- | arch/arm/mach-realview/include/mach/hardware.h | 9 | ||||
| -rw-r--r-- | arch/arm/mach-realview/include/mach/io.h | 9 | ||||
| -rw-r--r-- | arch/arm/mach-realview/include/mach/irqs.h | 1 | ||||
| -rw-r--r-- | arch/arm/mach-realview/include/mach/memory.h | 14 | ||||
| -rw-r--r-- | arch/arm/mach-realview/include/mach/uncompress.h | 3 | ||||
| -rw-r--r-- | arch/arm/mach-realview/include/mach/vmalloc.h | 2 |
12 files changed, 217 insertions, 50 deletions
diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h index 8d699fd324d0..268d7701fa9b 100644 --- a/arch/arm/mach-realview/include/mach/board-eb.h +++ b/arch/arm/mach-realview/include/mach/board-eb.h @@ -49,16 +49,14 @@ #ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB #define REALVIEW_EB11MP_SCU_BASE 0x10100000 /* SCU registers */ #define REALVIEW_EB11MP_GIC_CPU_BASE 0x10100100 /* Generic interrupt controller CPU interface */ -#define REALVIEW_EB11MP_TWD_BASE 0x10100700 -#define REALVIEW_EB11MP_TWD_SIZE 0x00000100 +#define REALVIEW_EB11MP_TWD_BASE 0x10100600 #define REALVIEW_EB11MP_GIC_DIST_BASE 0x10101000 /* Generic interrupt controller distributor */ #define REALVIEW_EB11MP_L220_BASE 0x10102000 /* L220 registers */ #define REALVIEW_EB11MP_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */ #else #define REALVIEW_EB11MP_SCU_BASE 0x1F000000 /* SCU registers */ #define REALVIEW_EB11MP_GIC_CPU_BASE 0x1F000100 /* Generic interrupt controller CPU interface */ -#define REALVIEW_EB11MP_TWD_BASE 0x1F000700 -#define REALVIEW_EB11MP_TWD_SIZE 0x00000100 +#define REALVIEW_EB11MP_TWD_BASE 0x1F000600 #define REALVIEW_EB11MP_GIC_DIST_BASE 0x1F001000 /* Generic interrupt controller distributor */ #define REALVIEW_EB11MP_L220_BASE 0x1F002000 /* L220 registers */ #define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */ @@ -163,7 +161,7 @@ #define NR_IRQS NR_IRQS_EB #endif -#if defined(CONFIG_REALVIEW_EB_ARM11MP) \ +#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \ && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP)) #undef MAX_GIC_NR #define MAX_GIC_NR NR_GIC_EB11MP @@ -177,6 +175,7 @@ #define REALVIEW_EB_PROC_ARM9 0x02000000 #define REALVIEW_EB_PROC_ARM11 0x04000000 #define REALVIEW_EB_PROC_ARM11MP 0x06000000 +#define REALVIEW_EB_PROC_A9MP 0x0C000000 #define check_eb_proc(proc_type) \ ((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK) \ @@ -188,4 +187,13 @@ #define core_tile_eb11mp() 0 #endif +#ifdef CONFIG_REALVIEW_EB_A9MP +#define core_tile_a9mp() check_eb_proc(REALVIEW_EB_PROC_A9MP) +#else +#define core_tile_a9mp() 0 +#endif + +#define machine_is_realview_eb_mp() \ + (machine_is_realview_eb() && (core_tile_eb11mp() || core_tile_a9mp())) + #endif /* __ASM_ARCH_BOARD_EB_H */ diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h index ecd80e58631e..53ea0e7a1267 100644 --- a/arch/arm/mach-realview/include/mach/board-pb11mp.h +++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h @@ -77,8 +77,7 @@ */ #define REALVIEW_TC11MP_SCU_BASE 0x1F000000 /* IRQ, Test chip */ #define REALVIEW_TC11MP_GIC_CPU_BASE 0x1F000100 /* Test chip interrupt controller CPU interface */ -#define REALVIEW_TC11MP_TWD_BASE 0x1F000700 -#define REALVIEW_TC11MP_TWD_SIZE 0x00000100 +#define REALVIEW_TC11MP_TWD_BASE 0x1F000600 #define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */ #define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */ diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h new file mode 100644 index 000000000000..c8bed8f58bab --- /dev/null +++ b/arch/arm/mach-realview/include/mach/board-pba8.h @@ -0,0 +1,152 @@ +/* + * include/asm-arm/arch-realview/board-pba8.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_BOARD_PBA8_H +#define __ASM_ARCH_BOARD_PBA8_H + +#include <mach/platform.h> + +/* + * Peripheral addresses + */ +#define REALVIEW_PBA8_UART0_BASE 0x10009000 /* UART 0 */ +#define REALVIEW_PBA8_UART1_BASE 0x1000A000 /* UART 1 */ +#define REALVIEW_PBA8_UART2_BASE 0x1000B000 /* UART 2 */ +#define REALVIEW_PBA8_UART3_BASE 0x1000C000 /* UART 3 */ +#define REALVIEW_PBA8_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ +#define REALVIEW_PBA8_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */ +#define REALVIEW_PBA8_WATCHDOG_BASE 0x10010000 /* watchdog interface */ +#define REALVIEW_PBA8_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ +#define REALVIEW_PBA8_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ +#define REALVIEW_PBA8_GPIO0_BASE 0x10013000 /* GPIO port 0 */ +#define REALVIEW_PBA8_RTC_BASE 0x10017000 /* Real Time Clock */ +#define REALVIEW_PBA8_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */ +#define REALVIEW_PBA8_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */ +#define REALVIEW_PBA8_SCTL_BASE 0x1001A000 /* System Controller */ +#define REALVIEW_PBA8_CLCD_BASE 0x10020000 /* CLCD */ +#define REALVIEW_PBA8_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */ +#define REALVIEW_PBA8_DMC_BASE 0x100E0000 /* DMC configuration */ +#define REALVIEW_PBA8_SMC_BASE 0x100E1000 /* SMC configuration */ +#define REALVIEW_PBA8_CAN_BASE 0x100E2000 /* CAN bus */ +#define REALVIEW_PBA8_CF_BASE 0x18000000 /* Compact flash */ +#define REALVIEW_PBA8_CF_MEM_BASE 0x18003000 /* SMC for Compact flash */ +#define REALVIEW_PBA8_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */ +#define REALVIEW_PBA8_FLASH0_BASE 0x40000000 +#define REALVIEW_PBA8_FLASH0_SIZE SZ_64M +#define REALVIEW_PBA8_FLASH1_BASE 0x44000000 +#define REALVIEW_PBA8_FLASH1_SIZE SZ_64M +#define REALVIEW_PBA8_ETH_BASE 0x4E000000 /* Ethernet */ +#define REALVIEW_PBA8_USB_BASE 0x4F000000 /* USB */ +#define REALVIEW_PBA8_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */ +#define REALVIEW_PBA8_LT_BASE 0xC0000000 /* Logic Tile expansion */ +#define REALVIEW_PBA8_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */ +#define REALVIEW_PBA8_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */ + +#define REALVIEW_PBA8_SYS_PLD_CTRL1 0x74 + +/* + * PBA8 PCI regions + */ +#define REALVIEW_PBA8_PCI_BASE 0x90040000 /* PCI-X Unit base */ +#define REALVIEW_PBA8_PCI_IO_BASE 0x90050000 /* IO Region on AHB */ +#define REALVIEW_PBA8_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */ + +#define REALVIEW_PBA8_PCI_BASE_SIZE 0x10000 /* 16 Kb */ +#define REALVIEW_PBA8_PCI_IO_SIZE 0x1000 /* 4 Kb */ +#define REALVIEW_PBA8_PCI_MEM_SIZE 0x20000000 /* 512 MB */ + +/* + * Irqs + */ +#define IRQ_PBA8_GIC_START 32 + +/* L220 +#define IRQ_PBA8_L220_EVENT (IRQ_PBA8_GIC_START + 29) +#define IRQ_PBA8_L220_SLAVE (IRQ_PBA8_GIC_START + 30) +#define IRQ_PBA8_L220_DECODE (IRQ_PBA8_GIC_START + 31) +*/ + +/* + * PB-A8 on-board gic irq sources + */ +#define IRQ_PBA8_WATCHDOG (IRQ_PBA8_GIC_START + 0) /* Watchdog timer */ +#define IRQ_PBA8_SOFT (IRQ_PBA8_GIC_START + 1) /* Software interrupt */ +#define IRQ_PBA8_COMMRx (IRQ_PBA8_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_PBA8_COMMTx (IRQ_PBA8_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_PBA8_TIMER0_1 (IRQ_PBA8_GIC_START + 4) /* Timer 0/1 (default timer) */ +#define IRQ_PBA8_TIMER2_3 (IRQ_PBA8_GIC_START + 5) /* Timer 2/3 */ +#define IRQ_PBA8_GPIO0 (IRQ_PBA8_GIC_START + 6) /* GPIO 0 */ +#define IRQ_PBA8_GPIO1 (IRQ_PBA8_GIC_START + 7) /* GPIO 1 */ +#define IRQ_PBA8_GPIO2 (IRQ_PBA8_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_PBA8_RTC (IRQ_PBA8_GIC_START + 10) /* Real Time Clock */ +#define IRQ_PBA8_SSP (IRQ_PBA8_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_PBA8_UART0 (IRQ_PBA8_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_PBA8_UART1 (IRQ_PBA8_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_PBA8_UART2 (IRQ_PBA8_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_PBA8_UART3 (IRQ_PBA8_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_PBA8_SCI (IRQ_PBA8_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_PBA8_MMCI0A (IRQ_PBA8_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_PBA8_MMCI0B (IRQ_PBA8_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_PBA8_AACI (IRQ_PBA8_GIC_START + 19) /* Audio Codec */ +#define IRQ_PBA8_KMI0 (IRQ_PBA8_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_PBA8_KMI1 (IRQ_PBA8_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_PBA8_CHARLCD (IRQ_PBA8_GIC_START + 22) /* Character LCD */ +#define IRQ_PBA8_CLCD (IRQ_PBA8_GIC_START + 23) /* CLCD controller */ +#define IRQ_PBA8_DMAC (IRQ_PBA8_GIC_START + 24) /* DMA controller */ +#define IRQ_PBA8_PWRFAIL (IRQ_PBA8_GIC_START + 25) /* Power failure */ +#define IRQ_PBA8_PISMO (IRQ_PBA8_GIC_START + 26) /* PISMO interface */ +#define IRQ_PBA8_DoC (IRQ_PBA8_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_PBA8_ETH (IRQ_PBA8_GIC_START + 28) /* Ethernet controller */ +#define IRQ_PBA8_USB (IRQ_PBA8_GIC_START + 29) /* USB controller */ +#define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */ + +/* ... */ +#define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50) +#define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51) +#define IRQ_PBA8_PCI2 (IRQ_PBA8_GIC_START + 52) +#define IRQ_PBA8_PCI3 (IRQ_PBA8_GIC_START + 53) + +#define IRQ_PBA8_SMC -1 +#define IRQ_PBA8_SCTL -1 + +#define NR_GIC_PBA8 1 + +/* + * Only define NR_IRQS if less than NR_IRQS_PBA8 + */ +#define NR_IRQS_PBA8 (IRQ_PBA8_GIC_START + 64) + +#if defined(CONFIG_MACH_REALVIEW_PBA8) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PBA8 +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PBA8 +#endif + +#endif /* CONFIG_MACH_REALVIEW_PBA8 */ + +#endif /* __ASM_ARCH_BOARD_PBA8_H */ diff --git a/arch/arm/mach-realview/include/mach/clkdev.h b/arch/arm/mach-realview/include/mach/clkdev.h new file mode 100644 index 000000000000..04b37a89801c --- /dev/null +++ b/arch/arm/mach-realview/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S index 7196bcadff0c..92dbcb9e1792 100644 --- a/arch/arm/mach-realview/include/mach/debug-macro.S +++ b/arch/arm/mach-realview/include/mach/debug-macro.S @@ -8,15 +8,36 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * -*/ + */ + +#if defined(CONFIG_MACH_REALVIEW_EB) || \ + defined(CONFIG_MACH_REALVIEW_PB11MP) || \ + defined(CONFIG_MACH_REALVIEW_PBA8) +#ifndef DEBUG_LL_UART_OFFSET +#define DEBUG_LL_UART_OFFSET 0x00009000 +#elif DEBUG_LL_UART_OFFSET != 0x00009000 +#warning "DEBUG_LL_UART_OFFSET already defined to a different value" +#endif +#endif + +#ifdef CONFIG_MACH_REALVIEW_PB1176 +#ifndef DEBUG_LL_UART_OFFSET +#define DEBUG_LL_UART_OFFSET 0x0010c000 +#elif DEBUG_LL_UART_OFFSET != 0x0010c000 +#warning "DEBUG_LL_UART_OFFSET already defined to a different value" +#endif +#endif + +#ifndef DEBUG_LL_UART_OFFSET +#error "Unknown RealView platform" +#endif .macro addruart,rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? moveq \rx, #0x10000000 - movne \rx, #0xf0000000 @ virtual base - orr \rx, \rx, #0x00009000 + movne \rx, #0xfb000000 @ virtual base + orr \rx, \rx, #DEBUG_LL_UART_OFFSET .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-realview/include/mach/dma.h b/arch/arm/mach-realview/include/mach/dma.h deleted file mode 100644 index f1a5a1a10952..000000000000 --- a/arch/arm/mach-realview/include/mach/dma.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/dma.h - * - * Copyright (C) 2003 ARM Limited. - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h index 79a93b3dfca9..b42c14f89acb 100644 --- a/arch/arm/mach-realview/include/mach/hardware.h +++ b/arch/arm/mach-realview/include/mach/hardware.h @@ -25,7 +25,14 @@ #include <asm/sizes.h> /* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) (((x) & 0x0fffffff) + 0xf0000000) +/* + * Statically mapped addresses: + * + * 10xx xxxx -> fbxx xxxx + * 1exx xxxx -> fdxx xxxx + * 1fxx xxxx -> fexx xxxx + */ +#define IO_ADDRESS(x) (((x) & 0x03ffffff) + 0xfb000000) #define __io_address(n) __io(IO_ADDRESS(n)) #endif diff --git a/arch/arm/mach-realview/include/mach/io.h b/arch/arm/mach-realview/include/mach/io.h index aa069424d310..f05bcdf605d8 100644 --- a/arch/arm/mach-realview/include/mach/io.h +++ b/arch/arm/mach-realview/include/mach/io.h @@ -22,12 +22,7 @@ #define IO_SPACE_LIMIT 0xffffffff -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)addr; -} - -#define __io(a) __io(a) -#define __mem_pci(a) (a) +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) #endif diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h index 02a918529db3..fe5cb987aa21 100644 --- a/arch/arm/mach-realview/include/mach/irqs.h +++ b/arch/arm/mach-realview/include/mach/irqs.h @@ -25,6 +25,7 @@ #include <mach/board-eb.h> #include <mach/board-pb11mp.h> #include <mach/board-pb1176.h> +#include <mach/board-pba8.h> #define IRQ_LOCALTIMER 29 #define IRQ_LOCALWDOG 30 diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h index 0e673483a141..293c30025e7e 100644 --- a/arch/arm/mach-realview/include/mach/memory.h +++ b/arch/arm/mach-realview/include/mach/memory.h @@ -23,16 +23,10 @@ /* * Physical DRAM offset. */ +#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET +#define PHYS_OFFSET UL(0x70000000) +#else #define PHYS_OFFSET UL(0x00000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) ((x) - PAGE_OFFSET) -#define __bus_to_virt(x) ((x) + PAGE_OFFSET) +#endif #endif diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h index 79f50f218e77..415d634d52ab 100644 --- a/arch/arm/mach-realview/include/mach/uncompress.h +++ b/arch/arm/mach-realview/include/mach/uncompress.h @@ -23,6 +23,7 @@ #include <mach/board-eb.h> #include <mach/board-pb11mp.h> #include <mach/board-pb1176.h> +#include <mach/board-pba8.h> #define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) #define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c)) @@ -40,6 +41,8 @@ static inline unsigned long get_uart_base(void) return REALVIEW_PB11MP_UART0_BASE; else if (machine_is_realview_pb1176()) return REALVIEW_PB1176_UART0_BASE; + else if (machine_is_realview_pba8()) + return REALVIEW_PBA8_UART0_BASE; else return 0; } diff --git a/arch/arm/mach-realview/include/mach/vmalloc.h b/arch/arm/mach-realview/include/mach/vmalloc.h index 48cbcc873db2..fe0de1b507ac 100644 --- a/arch/arm/mach-realview/include/mach/vmalloc.h +++ b/arch/arm/mach-realview/include/mach/vmalloc.h @@ -18,4 +18,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x18000000) +#define VMALLOC_END 0xf8000000 |
