summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/clock34xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/clock34xx.c')
-rw-r--r--arch/arm/mach-omap2/clock34xx.c261
1 files changed, 17 insertions, 244 deletions
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index d4217b93e10b..6febd5f11e85 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -2,13 +2,14 @@
* OMAP3-specific clock framework functions
*
* Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
+ * Copyright (C) 2007-2010 Nokia Corporation
*
- * Written by Paul Walmsley
- * Testing and integration fixes by Jouni Högander
+ * Paul Walmsley
+ * Jouni Högander
*
* Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
+ * Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -16,49 +17,23 @@
*/
#undef DEBUG
-#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <linux/limits.h>
-#include <linux/bitops.h>
-#include <plat/cpu.h>
#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-#include <asm/div64.h>
-#include <asm/clkdev.h>
#include "clock.h"
#include "clock34xx.h"
-#include "sdrc.h"
-#include "prm.h"
-#include "prm-regbits-34xx.h"
#include "cm.h"
#include "cm-regbits-34xx.h"
-#define CYCLES_PER_MHZ 1000000
-
-/*
- * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
- * that are sourced by DPLL5, and both of these require this clock
- * to be at 120 MHz for proper operation.
- */
-#define DPLL5_FREQ_FOR_USBHOST 120000000
-
-/* needed by omap3_core_dpll_m2_set_rate() */
-struct clk *sdrc_ick_p, *arm_fck_p;
-
/**
* omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
* from the CM_{I,F}CLKEN bit. Pass back the correct info via
@@ -66,13 +41,15 @@ struct clk *sdrc_ick_p, *arm_fck_p;
*/
static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
void __iomem **idlest_reg,
- u8 *idlest_bit)
+ u8 *idlest_bit,
+ u8 *idlest_val)
{
u32 r;
r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
*idlest_reg = (__force void __iomem *)r;
*idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clkops clkops_omap3430es2_ssi_wait = {
@@ -87,6 +64,7 @@ const struct clkops clkops_omap3430es2_ssi_wait = {
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* Some OMAP modules on OMAP3 ES2+ chips have both initiator and
* target IDLEST bits. For our purposes, we are concerned with the
@@ -97,7 +75,8 @@ const struct clkops clkops_omap3430es2_ssi_wait = {
*/
static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
void __iomem **idlest_reg,
- u8 *idlest_bit)
+ u8 *idlest_bit,
+ u8 *idlest_val)
{
u32 r;
@@ -105,6 +84,7 @@ static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
*idlest_reg = (__force void __iomem *)r;
/* USBHOST_IDLE has same shift */
*idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
@@ -119,6 +99,7 @@ const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
* shift from the CM_{I,F}CLKEN bit. Pass back the correct info via
@@ -126,13 +107,15 @@ const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
*/
static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
void __iomem **idlest_reg,
- u8 *idlest_bit)
+ u8 *idlest_bit,
+ u8 *idlest_val)
{
u32 r;
r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
*idlest_reg = (__force void __iomem *)r;
*idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clkops clkops_omap3430es2_hsotgusb_wait = {
@@ -141,213 +124,3 @@ const struct clkops clkops_omap3430es2_hsotgusb_wait = {
.find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
-
-const struct clkops clkops_noncore_dpll_ops = {
- .enable = omap3_noncore_dpll_enable,
- .disable = omap3_noncore_dpll_disable,
-};
-
-int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
-{
- /*
- * According to the 12-5 CDP code from TI, "Limitation 2.5"
- * on 3430ES1 prevents us from changing DPLL multipliers or dividers
- * on DPLL4.
- */
- if (omap_rev() == OMAP3430_REV_ES1_0) {
- printk(KERN_ERR "clock: DPLL4 cannot change rate due to "
- "silicon 'Limitation 2.5' on 3430ES1.\n");
- return -EINVAL;
- }
- return omap3_noncore_dpll_set_rate(clk, rate);
-}
-
-
-/*
- * CORE DPLL (DPLL3) rate programming functions
- *
- * These call into SRAM code to do the actual CM writes, since the SDRAM
- * is clocked from DPLL3.
- */
-
-/**
- * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
- * @clk: struct clk * of DPLL to set
- * @rate: rounded target rate
- *
- * Program the DPLL M2 divider with the rounded target rate. Returns
- * -EINVAL upon error, or 0 upon success.
- */
-int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 new_div = 0;
- u32 unlock_dll = 0;
- u32 c;
- unsigned long validrate, sdrcrate, _mpurate;
- struct omap_sdrc_params *sdrc_cs0;
- struct omap_sdrc_params *sdrc_cs1;
- int ret;
-
- if (!clk || !rate)
- return -EINVAL;
-
- validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
- if (validrate != rate)
- return -EINVAL;
-
- sdrcrate = sdrc_ick_p->rate;
- if (rate > clk->rate)
- sdrcrate <<= ((rate / clk->rate) >> 1);
- else
- sdrcrate >>= ((clk->rate / rate) >> 1);
-
- ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
- if (ret)
- return -EINVAL;
-
- if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
- pr_debug("clock: will unlock SDRC DLL\n");
- unlock_dll = 1;
- }
-
- /*
- * XXX This only needs to be done when the CPU frequency changes
- */
- _mpurate = arm_fck_p->rate / CYCLES_PER_MHZ;
- c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
- c += 1; /* for safety */
- c *= SDRC_MPURATE_LOOPS;
- c >>= SDRC_MPURATE_SCALE;
- if (c == 0)
- c = 1;
-
- pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
- validrate);
- pr_debug("clock: SDRC CS0 timing params used:"
- " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
- sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
- sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
- if (sdrc_cs1)
- pr_debug("clock: SDRC CS1 timing params used: "
- " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
- sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
- sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
-
- if (sdrc_cs1)
- omap3_configure_core_dpll(
- new_div, unlock_dll, c, rate > clk->rate,
- sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
- sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
- sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
- sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
- else
- omap3_configure_core_dpll(
- new_div, unlock_dll, c, rate > clk->rate,
- sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
- sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
- 0, 0, 0, 0);
-
- return 0;
-}
-
-/* Common clock code */
-
-/*
- * As it is structured now, this will prevent an OMAP2/3 multiboot
- * kernel from compiling. This will need further attention.
- */
-#if defined(CONFIG_ARCH_OMAP3)
-
-struct clk_functions omap2_clk_functions = {
- .clk_enable = omap2_clk_enable,
- .clk_disable = omap2_clk_disable,
- .clk_round_rate = omap2_clk_round_rate,
- .clk_set_rate = omap2_clk_set_rate,
- .clk_set_parent = omap2_clk_set_parent,
- .clk_disable_unused = omap2_clk_disable_unused,
-};
-
-/*
- * Set clocks for bypass mode for reboot to work.
- */
-void omap2_clk_prepare_for_reboot(void)
-{
- /* REVISIT: Not ready for 343x */
-#if 0
- u32 rate;
-
- if (vclk == NULL || sclk == NULL)
- return;
-
- rate = clk_get_rate(sclk);
- clk_set_rate(vclk, rate);
-#endif
-}
-
-void omap3_clk_lock_dpll5(void)
-{
- struct clk *dpll5_clk;
- struct clk *dpll5_m2_clk;
-
- dpll5_clk = clk_get(NULL, "dpll5_ck");
- clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
- clk_enable(dpll5_clk);
-
- /* Enable autoidle to allow it to enter low power bypass */
- omap3_dpll_allow_idle(dpll5_clk);
-
- /* Program dpll5_m2_clk divider for no division */
- dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
- clk_enable(dpll5_m2_clk);
- clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
-
- clk_disable(dpll5_m2_clk);
- clk_disable(dpll5_clk);
- return;
-}
-
-/* REVISIT: Move this init stuff out into clock.c */
-
-/*
- * Switch the MPU rate if specified on cmdline.
- * We cannot do this early until cmdline is parsed.
- */
-static int __init omap2_clk_arch_init(void)
-{
- struct clk *osc_sys_ck, *dpll1_ck, *arm_fck, *core_ck;
- unsigned long osc_sys_rate;
-
- if (!mpurate)
- return -EINVAL;
-
- /* XXX test these for success */
- dpll1_ck = clk_get(NULL, "dpll1_ck");
- arm_fck = clk_get(NULL, "arm_fck");
- core_ck = clk_get(NULL, "core_ck");
- osc_sys_ck = clk_get(NULL, "osc_sys_ck");
-
- /* REVISIT: not yet ready for 343x */
- if (clk_set_rate(dpll1_ck, mpurate))
- printk(KERN_ERR "*** Unable to set MPU rate\n");
-
- recalculate_root_clocks();
-
- osc_sys_rate = clk_get_rate(osc_sys_ck);
-
- pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
- "%ld.%01ld/%ld/%ld MHz\n",
- (osc_sys_rate / 1000000),
- ((osc_sys_rate / 100000) % 10),
- (clk_get_rate(core_ck) / 1000000),
- (clk_get_rate(arm_fck) / 1000000));
-
- calibrate_delay();
-
- return 0;
-}
-arch_initcall(omap2_clk_arch_init);
-
-
-#endif
-
-
OpenPOWER on IntegriCloud