diff options
Diffstat (limited to 'arch/arm/mach-kirkwood/sheevaplug-setup.c')
| -rw-r--r-- | arch/arm/mach-kirkwood/sheevaplug-setup.c | 161 |
1 files changed, 0 insertions, 161 deletions
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c deleted file mode 100644 index 55b68fa39f45..000000000000 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * arch/arm/mach-kirkwood/sheevaplug-setup.c - * - * Marvell SheevaPlug Reference Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> -#include <linux/mtd/partitions.h> -#include <linux/mv643xx_eth.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> -#include <linux/platform_data/mmc-mvsdio.h> -#include "common.h" -#include "mpp.h" - -static struct mtd_partition sheevaplug_nand_parts[] = { - { - .name = "u-boot", - .offset = 0, - .size = SZ_1M - }, { - .name = "uImage", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_4M - }, { - .name = "root", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL - }, -}; - -static struct mv643xx_eth_platform_data sheevaplug_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct mv_sata_platform_data sheeva_esata_sata_data = { - .n_ports = 2, -}; - -static struct mvsdio_platform_data sheevaplug_mvsdio_data = { - /* unfortunately the CD signal has not been connected */ -}; - -static struct mvsdio_platform_data sheeva_esata_mvsdio_data = { - .gpio_write_protect = 44, /* MPP44 used as SD write protect */ - .gpio_card_detect = 47, /* MPP47 used as SD card detect */ -}; - -static struct gpio_led sheevaplug_led_pins[] = { - { - .name = "plug:red:misc", - .default_trigger = "none", - .gpio = 46, - .active_low = 1, - }, - { - .name = "plug:green:health", - .default_trigger = "default-on", - .gpio = 49, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data sheevaplug_led_data = { - .leds = sheevaplug_led_pins, - .num_leds = ARRAY_SIZE(sheevaplug_led_pins), -}; - -static struct platform_device sheevaplug_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &sheevaplug_led_data, - } -}; - -static unsigned int sheevaplug_mpp_config[] __initdata = { - MPP29_GPIO, /* USB Power Enable */ - MPP46_GPIO, /* LED Red */ - MPP49_GPIO, /* LED */ - 0 -}; - -static unsigned int sheeva_esata_mpp_config[] __initdata = { - MPP29_GPIO, /* USB Power Enable */ - MPP44_GPIO, /* SD Write Protect */ - MPP47_GPIO, /* SD Card Detect */ - MPP49_GPIO, /* LED Green */ - 0 -}; - -static void __init sheevaplug_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - - /* setup gpio pin select */ - if (machine_is_esata_sheevaplug()) - kirkwood_mpp_conf(sheeva_esata_mpp_config); - else - kirkwood_mpp_conf(sheevaplug_mpp_config); - - kirkwood_uart0_init(); - kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25); - - if (gpio_request(29, "USB Power Enable") != 0 || - gpio_direction_output(29, 1) != 0) - pr_err("can't set up GPIO 29 (USB Power Enable)\n"); - kirkwood_ehci_init(); - - kirkwood_ge00_init(&sheevaplug_ge00_data); - - /* honor lower power consumption for plugs with out eSATA */ - if (machine_is_esata_sheevaplug()) - kirkwood_sata_init(&sheeva_esata_sata_data); - - /* enable sd wp and sd cd on plugs with esata */ - if (machine_is_esata_sheevaplug()) - kirkwood_sdio_init(&sheeva_esata_mvsdio_data); - else - kirkwood_sdio_init(&sheevaplug_mvsdio_data); - - platform_device_register(&sheevaplug_leds); -} - -#ifdef CONFIG_MACH_SHEEVAPLUG -MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board") - /* Maintainer: shadi Ammouri <shadi@marvell.com> */ - .atag_offset = 0x100, - .init_machine = sheevaplug_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG -MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board") - .atag_offset = 0x100, - .init_machine = sheevaplug_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif |
