diff options
Diffstat (limited to 'arch/arm/mach-at91/at91sam9x5.c')
| -rw-r--r-- | arch/arm/mach-at91/at91sam9x5.c | 373 |
1 files changed, 373 insertions, 0 deletions
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c new file mode 100644 index 000000000000..1c3444d2ee0c --- /dev/null +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -0,0 +1,373 @@ +/* + * Chip-specific setup code for the AT91SAM9x5 family + * + * Copyright (C) 2010-2012 Atmel Corporation. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/module.h> +#include <linux/dma-mapping.h> + +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/at91sam9x5.h> +#include <mach/at91_pmc.h> +#include <mach/cpu.h> +#include <mach/board.h> + +#include "soc.h" +#include "generic.h" +#include "clock.h" +#include "sam9_smc.h" + +/* -------------------------------------------------------------------- + * Clocks + * -------------------------------------------------------------------- */ + +/* + * The peripheral clocks. + */ +static struct clk pioAB_clk = { + .name = "pioAB_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_PIOAB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioCD_clk = { + .name = "pioCD_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_PIOCD, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk smd_clk = { + .name = "smd_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_SMD, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart0_clk = { + .name = "usart0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_USART0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart1_clk = { + .name = "usart1_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_USART1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart2_clk = { + .name = "usart2_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_USART2, + .type = CLK_TYPE_PERIPHERAL, +}; +/* USART3 clock - Only for sam9g25/sam9x25 */ +static struct clk usart3_clk = { + .name = "usart3_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_USART3, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi0_clk = { + .name = "twi0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_TWI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi1_clk = { + .name = "twi1_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_TWI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi2_clk = { + .name = "twi2_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_TWI2, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc0_clk = { + .name = "mci0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_MCI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi0_clk = { + .name = "spi0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_SPI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi1_clk = { + .name = "spi1_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_SPI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk uart0_clk = { + .name = "uart0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_UART0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk uart1_clk = { + .name = "uart1_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_UART1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tcb0_clk = { + .name = "tcb0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_TCB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pwm_clk = { + .name = "pwm_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_PWM, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk adc_clk = { + .name = "adc_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_ADC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk dma0_clk = { + .name = "dma0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_DMA0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk dma1_clk = { + .name = "dma1_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_DMA1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk uhphs_clk = { + .name = "uhphs_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_UHPHS, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk udphs_clk = { + .name = "udphs_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_UDPHS, + .type = CLK_TYPE_PERIPHERAL, +}; +/* emac0 clock - Only for sam9g25/sam9x25/sam9g35/sam9x35 */ +static struct clk macb0_clk = { + .name = "pclk", + .pmc_mask = 1 << AT91SAM9X5_ID_EMAC0, + .type = CLK_TYPE_PERIPHERAL, +}; +/* lcd clock - Only for sam9g15/sam9g35/sam9x35 */ +static struct clk lcdc_clk = { + .name = "lcdc_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_LCDC, + .type = CLK_TYPE_PERIPHERAL, +}; +/* isi clock - Only for sam9g25 */ +static struct clk isi_clk = { + .name = "isi_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_ISI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc1_clk = { + .name = "mci1_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_MCI1, + .type = CLK_TYPE_PERIPHERAL, +}; +/* emac1 clock - Only for sam9x25 */ +static struct clk macb1_clk = { + .name = "pclk", + .pmc_mask = 1 << AT91SAM9X5_ID_EMAC1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ssc_clk = { + .name = "ssc_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_SSC, + .type = CLK_TYPE_PERIPHERAL, +}; +/* can0 clock - Only for sam9x35 */ +static struct clk can0_clk = { + .name = "can0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_CAN0, + .type = CLK_TYPE_PERIPHERAL, +}; +/* can1 clock - Only for sam9x35 */ +static struct clk can1_clk = { + .name = "can1_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_CAN1, + .type = CLK_TYPE_PERIPHERAL, +}; + +static struct clk *periph_clocks[] __initdata = { + &pioAB_clk, + &pioCD_clk, + &smd_clk, + &usart0_clk, + &usart1_clk, + &usart2_clk, + &twi0_clk, + &twi1_clk, + &twi2_clk, + &mmc0_clk, + &spi0_clk, + &spi1_clk, + &uart0_clk, + &uart1_clk, + &tcb0_clk, + &pwm_clk, + &adc_clk, + &dma0_clk, + &dma1_clk, + &uhphs_clk, + &udphs_clk, + &mmc1_clk, + &ssc_clk, + // irq0 +}; + +static struct clk_lookup periph_clocks_lookups[] = { + /* lookup table for DT entries */ + CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), + CLKDEV_CON_DEV_ID("usart", "f801c000.serial", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), + CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk), + CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk), + CLKDEV_CON_ID("pioA", &pioAB_clk), + CLKDEV_CON_ID("pioB", &pioAB_clk), + CLKDEV_CON_ID("pioC", &pioCD_clk), + CLKDEV_CON_ID("pioD", &pioCD_clk), + /* additional fake clock for macb_hclk */ + CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk), + CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk), +}; + +/* + * The two programmable clocks. + * You must configure pin multiplexing to bring these signals out. + */ +static struct clk pck0 = { + .name = "pck0", + .pmc_mask = AT91_PMC_PCK0, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 0, +}; +static struct clk pck1 = { + .name = "pck1", + .pmc_mask = AT91_PMC_PCK1, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 1, +}; + +static void __init at91sam9x5_register_clocks(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) + clk_register(periph_clocks[i]); + + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + + if (cpu_is_at91sam9g25() + || cpu_is_at91sam9x25()) + clk_register(&usart3_clk); + + if (cpu_is_at91sam9g25() + || cpu_is_at91sam9x25() + || cpu_is_at91sam9g35() + || cpu_is_at91sam9x35()) + clk_register(&macb0_clk); + + if (cpu_is_at91sam9g15() + || cpu_is_at91sam9g35() + || cpu_is_at91sam9x35()) + clk_register(&lcdc_clk); + + if (cpu_is_at91sam9g25()) + clk_register(&isi_clk); + + if (cpu_is_at91sam9x25()) + clk_register(&macb1_clk); + + if (cpu_is_at91sam9x25() + || cpu_is_at91sam9x35()) { + clk_register(&can0_clk); + clk_register(&can1_clk); + } + + clk_register(&pck0); + clk_register(&pck1); +} + +/* -------------------------------------------------------------------- + * AT91SAM9x5 processor initialization + * -------------------------------------------------------------------- */ + +static void __init at91sam9x5_map_io(void) +{ + at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE); +} + +static void __init at91sam9x5_ioremap_registers(void) +{ + if (of_at91sam926x_pit_init() < 0) + panic("Impossible to find PIT\n"); +} + +void __init at91sam9x5_initialize(void) +{ + arm_pm_restart = at91sam9g45_restart; + at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0); + + /* Register GPIO subsystem (using DT) */ + at91_gpio_init(NULL, 0); +} + +/* -------------------------------------------------------------------- + * AT91SAM9x5 devices (temporary before modification of code) + * -------------------------------------------------------------------- */ +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} +struct platform_device *atmel_default_console_device = NULL; + +void __init at91_add_device_nand(struct atmel_nand_data *data) {} + +/* -------------------------------------------------------------------- + * Interrupt initialization + * -------------------------------------------------------------------- */ +/* + * The default interrupt priority levels (0 = lowest, 7 = highest). + */ +static unsigned int at91sam9x5_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller (FIQ) */ + 7, /* System Peripherals */ + 1, /* Parallel IO Controller A and B */ + 1, /* Parallel IO Controller C and D */ + 4, /* Soft Modem */ + 5, /* USART 0 */ + 5, /* USART 1 */ + 5, /* USART 2 */ + 5, /* USART 3 */ + 6, /* Two-Wire Interface 0 */ + 6, /* Two-Wire Interface 1 */ + 6, /* Two-Wire Interface 2 */ + 0, /* Multimedia Card Interface 0 */ + 5, /* Serial Peripheral Interface 0 */ + 5, /* Serial Peripheral Interface 1 */ + 5, /* UART 0 */ + 5, /* UART 1 */ + 0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */ + 0, /* Pulse Width Modulation Controller */ + 0, /* ADC Controller */ + 0, /* DMA Controller 0 */ + 0, /* DMA Controller 1 */ + 2, /* USB Host High Speed port */ + 2, /* USB Device High speed port */ + 3, /* Ethernet MAC 0 */ + 3, /* LDC Controller or Image Sensor Interface */ + 0, /* Multimedia Card Interface 1 */ + 3, /* Ethernet MAC 1 */ + 4, /* Synchronous Serial Interface */ + 4, /* CAN Controller 0 */ + 4, /* CAN Controller 1 */ + 0, /* Advanced Interrupt Controller (IRQ0) */ +}; + +struct at91_init_soc __initdata at91sam9x5_soc = { + .map_io = at91sam9x5_map_io, + .default_irq_priority = at91sam9x5_default_irq_priority, + .ioremap_registers = at91sam9x5_ioremap_registers, + .register_clocks = at91sam9x5_register_clocks, + .init = at91sam9x5_initialize, +}; |
