diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 390 |
1 files changed, 390 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts new file mode 100644 index 000000000000..11966d12af76 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts @@ -0,0 +1,390 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Digi International's ConnectCore6UL SBC Pro board device tree source + * + * Copyright 2018 Digi International, Inc. + * + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6ul.dtsi" +#include "imx6ul-ccimx6ulsom.dtsi" + +/ { + model = "Digi International ConnectCore 6UL SBC Pro."; + compatible = "digi,ccimx6ulsbcpro", "digi,ccimx6ulsom", "fsl,imx6ul"; + + lcd_backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm5 0 50000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1 { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <&ext_3v3>; + status = "okay"; +}; + +/* CAN2 is multiplexed with UART2 RTS/CTS */ +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <&ext_3v3>; + status = "disabled"; +}; + +&ecspi1 { + cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_master>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; + phy-reset-duration = <26>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + smsc,disable-energy-detect; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + smsc,disable-energy-detect; + reg = <1>; + }; + }; +}; + +&gpio5 { + emmc-usd-mux { + gpio-hog; + gpios = <1 GPIO_ACTIVE_LOW>; + output-high; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat0_17 + &pinctrl_lcdif_clken + &pinctrl_lcdif_hvsync>; + lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */ + status = "okay"; +}; + +&ldo4_ext { + regulator-max-microvolt = <1800000>; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&pwm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm5>; + status = "okay"; +}; + +&pwm6 { + status = "okay"; +}; + +&pwm7 { + status = "okay"; +}; + +&pwm8 { + status = "okay"; +}; + +&sai2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_sai2>; + pinctrl-1 = <&pinctrl_sai2_sleep>; + assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>, + <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>, + <&clks IMX6UL_CLK_SAI2>; + assigned-clock-rates = <0>, <786432000>, <12288000>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + status = "okay"; +}; + +/* UART2 RTS/CTS muxed with CAN2 */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_4wires>; + uart-has-rtscts; + status = "okay"; +}; + +/* UART3 RTS/CTS muxed with CAN 1 */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_2wires>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-0 = <&pinctrl_usbotg1>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +/* USDHC2 (microSD conflicts with eMMC) */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + broken-cd; /* no carrier detect line (use polling) */ + status = "okay"; +}; + +&iomuxc { + pinctrl_adc1: adc1grp { + fsl,pins = < + /* EXP_GPIO_2 -> GPIO1_3/ADC1_IN3 */ + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + >; + }; + + pinctrl_ecspi1_master: ecspi1grp1 { + fsl,pins = < + MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x10b0 + MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x10b0 + MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x10b0 + MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x10b0 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x40017051 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x40017051 + >; + }; + + pinctrl_enet2_mdio: mdioenet2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp{ + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + >; + }; + pinctrl_flexcan2: flexcan2grp{ + fsl,pins = < + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + >; + }; + + pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + >; + }; + + pinctrl_lcdif_clken: lcdifctrlgrp1 { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x17050 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + >; + }; + + pinctrl_lcdif_hvsync: lcdifctrlgrp2 { + fsl,pins = < + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x110b0 + >; + }; + + pinctrl_pwm5: pwm5grp { + fsl,pins = < + MX6UL_PAD_NAND_DQS__PWM5_OUT 0x110b0 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 + MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + /* Interrupt */ + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x10b0 + >; + }; + + pinctrl_sai2_sleep: sai2grp-sleep { + fsl,pins = < + MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x3000 + MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x3000 + MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x3000 + MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x3000 + /* Interrupt */ + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x3000 + >; + }; + + pinctrl_uart2_4wires: uart2grp-4wires { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1 + MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart3_2wires: uart3grp-2wires { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059 + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10039 + MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059 + /* Mux selector between eMMC/SD# */ + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x79 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x17059 + MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x17059 + >; + }; +}; |
