diff options
Diffstat (limited to 'arch/arm/boot/dts/at91-som60.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/at91-som60.dtsi | 230 |
1 files changed, 230 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/at91-som60.dtsi b/arch/arm/boot/dts/at91-som60.dtsi new file mode 100644 index 000000000000..241682a207c5 --- /dev/null +++ b/arch/arm/boot/dts/at91-som60.dtsi @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-som60.dtsi - Device Tree file for the SOM60 module + * + * Copyright (C) 2018 Laird, + * 2018 Ben Whitten <ben.whitten@lairdtech.com> + * + */ +#include "sama5d36.dtsi" + +/ { + model = "Laird SOM60"; + compatible = "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; + + chosen { + stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x8000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; +}; + +&pinctrl { + board { + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_mmc0_en: mmc0_en { + atmel,pins = + <AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_nand0_wp: nand0_wp { + atmel,pins = + <AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_usb_vbus: usb_vbus { + atmel,pins = + <AT91_PIOE 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + /* Conflicts with USART2_SCK */ + }; + + pinctrl_usart2_sck: usart2_sck { + atmel,pins = + <AT91_PIOE 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; + /* Conflicts with USB_VBUS */ + }; + + pinctrl_usb_oc: usb_oc { + atmel,pins = + <AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + /* Conflicts with USART3_SCK */ + }; + + pinctrl_usart3_sck: usart3_sck { + atmel,pins = + <AT91_PIOE 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; + /* Conflicts with USB_OC */ + }; + + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_geth_int: geth_int { + atmel,pins = + <AT91_PIOB 25 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + /* Conflicts with USART1_SCK */ + }; + + pinctrl_usart1_sck: usart1_sck { + atmel,pins = + <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; + /* Conflicts with GETH_INT */ + }; + + pinctrl_eth_int: eth_int { + atmel,pins = + <AT91_PIOC 10 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_pck2_as_audio_mck: pck2_as_audio_mck { + atmel,pins = + <AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; +}; + +&mmc0 { + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +&mmc1 { + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&spi0 { + cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; +}; + +&usart0 { + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; + pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>; +}; + +&usart1 { + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; +}; + +&usart2 { + pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts_cts>; +}; + +&usart3 { + pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>; +}; + +&adc0 { + pinctrl-0 = < + &pinctrl_adc0_adtrg + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + &pinctrl_adc0_ad5 + >; +}; + +&macb0 { + phy-mode = "rgmii"; +}; + +&macb1 { + phy-mode = "rmii"; +}; + +&ebi { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand: nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + ubootspl@0 { + label = "u-boot-spl"; + reg = <0x0 0x20000>; + }; + + uboot@20000 { + label = "u-boot"; + reg = <0x20000 0x80000>; + }; + + ubootenv@a0000 { + label = "u-boot-env"; + reg = <0xa0000 0x20000>; + }; + + ubootenv@c0000 { + label = "u-boot-env"; + reg = <0xc0000 0x20000>; + }; + + ubi@e0000 { + label = "ubi"; + reg = <0xe0000 0xfe00000>; + }; + }; + }; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + atmel,vbus-gpio = <&pioC 14 GPIO_ACTIVE_HIGH>; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_vbus &pinctrl_usb_oc>; + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioE 20 GPIO_ACTIVE_HIGH + 0>; + atmel,oc-gpio = <0 + &pioE 15 GPIO_ACTIVE_LOW + 0>; +}; |
