diff options
Diffstat (limited to 'Documentation/devicetree')
21 files changed, 181 insertions, 9 deletions
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt index 0c80c2677104..9acea9d93160 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt @@ -15,6 +15,9 @@ Required properties : In clock consumers, this cell represents the clock ID exposed by the CAR. The assignments may be found in header file <dt-bindings/clock/tegra114-car.h>. +- #reset-cells : Should be 1. + In clock consumers, this cell represents the bit number in the CAR's + array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. Example SoC include file: @@ -23,6 +26,7 @@ Example SoC include file: compatible = "nvidia,tegra114-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; usb@c5004000 { diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt index 1a91ec60dee5..ded5d6212c84 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt @@ -15,6 +15,9 @@ Required properties : In clock consumers, this cell represents the clock ID exposed by the CAR. The assignments may be found in header file <dt-bindings/clock/tegra124-car.h>. +- #reset-cells : Should be 1. + In clock consumers, this cell represents the bit number in the CAR's + array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. Example SoC include file: @@ -23,6 +26,7 @@ Example SoC include file: compatible = "nvidia,tegra124-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; usb@c5004000 { diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt index fcfed5bf73fb..6c5901b503d0 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt @@ -15,6 +15,9 @@ Required properties : In clock consumers, this cell represents the clock ID exposed by the CAR. The assignments may be found in header file <dt-bindings/clock/tegra20-car.h>. +- #reset-cells : Should be 1. + In clock consumers, this cell represents the bit number in the CAR's + array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. Example SoC include file: @@ -23,6 +26,7 @@ Example SoC include file: compatible = "nvidia,tegra20-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; usb@c5004000 { diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt index 0f714081e986..63618cde12df 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt @@ -15,6 +15,9 @@ Required properties : In clock consumers, this cell represents the clock ID exposed by the CAR. The assignments may be found in header file <dt-bindings/clock/tegra30-car.h>. +- #reset-cells : Should be 1. + In clock consumers, this cell represents the bit number in the CAR's + array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. Example SoC include file: @@ -23,6 +26,7 @@ Example SoC include file: compatible = "nvidia,tegra30-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; usb@c5004000 { diff --git a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt index e0a68b972891..e0b166a7f04a 100644 --- a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt +++ b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt @@ -7,6 +7,10 @@ Required properties: - interrupts: Should contain all of the per-channel DMA interrupts. - clocks: Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - dma Examples: @@ -30,4 +34,6 @@ apbdma: dma@6000a000 { 0 150 0x04 0 151 0x04 >; clocks = <&tegra_car 34>; + resets = <&tegra_car 34>; + reset-names = "dma"; }; diff --git a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt index 8b4367f86b95..ab45c02aa658 100644 --- a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt +++ b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt @@ -11,6 +11,10 @@ Required properties: - ranges: The mapping of the host1x address space to the CPU address space. - clocks: Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - host1x The host1x top-level node defines a number of children, each representing one of the following host1x client modules: @@ -23,6 +27,10 @@ of the following host1x client modules: - interrupts: The interrupt outputs from the controller. - clocks: Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - mpe - vi: video input @@ -32,6 +40,10 @@ of the following host1x client modules: - interrupts: The interrupt outputs from the controller. - clocks: Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - vi - epp: encoder pre-processor @@ -41,6 +53,10 @@ of the following host1x client modules: - interrupts: The interrupt outputs from the controller. - clocks: Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - epp - isp: image signal processor @@ -50,6 +66,10 @@ of the following host1x client modules: - interrupts: The interrupt outputs from the controller. - clocks: Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - isp - gr2d: 2D graphics engine @@ -59,6 +79,10 @@ of the following host1x client modules: - interrupts: The interrupt outputs from the controller. - clocks: Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - 2d - gr3d: 3D graphics engine @@ -72,6 +96,11 @@ of the following host1x client modules: - 3d This MUST be the first entry. - 3d2 (Only required on SoCs with two 3D clocks) + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - 3d + - 3d2 (Only required on SoCs with two 3D clocks) - dc: display controller @@ -85,6 +114,10 @@ of the following host1x client modules: - dc This MUST be the first entry. - parent + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - dc Each display controller node has a child node, named "rgb", that represents the RGB output associated with the controller. It can take the following @@ -107,6 +140,10 @@ of the following host1x client modules: - hdmi This MUST be the first entry. - parent + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - hdmi Optional properties: - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing @@ -133,6 +170,10 @@ of the following host1x client modules: - dsi This MUST be the first entry. - parent + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - dsi Example: @@ -145,6 +186,8 @@ Example: interrupts = <0 65 0x04 /* mpcore syncpt */ 0 67 0x04>; /* mpcore general */ clocks = <&tegra_car TEGRA20_CLK_HOST1X>; + resets = <&tegra_car 28>; + reset-names = "host1x"; #address-cells = <1>; #size-cells = <1>; @@ -156,6 +199,8 @@ Example: reg = <0x54040000 0x00040000>; interrupts = <0 68 0x04>; clocks = <&tegra_car TEGRA20_CLK_MPE>; + resets = <&tegra_car 60>; + reset-names = "mpe"; }; vi { @@ -163,6 +208,8 @@ Example: reg = <0x54080000 0x00040000>; interrupts = <0 69 0x04>; clocks = <&tegra_car TEGRA20_CLK_VI>; + resets = <&tegra_car 100>; + reset-names = "vi"; }; epp { @@ -170,6 +217,8 @@ Example: reg = <0x540c0000 0x00040000>; interrupts = <0 70 0x04>; clocks = <&tegra_car TEGRA20_CLK_EPP>; + resets = <&tegra_car 19>; + reset-names = "epp"; }; isp { @@ -177,6 +226,8 @@ Example: reg = <0x54100000 0x00040000>; interrupts = <0 71 0x04>; clocks = <&tegra_car TEGRA20_CLK_ISP>; + resets = <&tegra_car 23>; + reset-names = "isp"; }; gr2d { @@ -184,12 +235,16 @@ Example: reg = <0x54140000 0x00040000>; interrupts = <0 72 0x04>; clocks = <&tegra_car TEGRA20_CLK_GR2D>; + resets = <&tegra_car 21>; + reset-names = "2d"; }; gr3d { compatible = "nvidia,tegra20-gr3d"; reg = <0x54180000 0x00040000>; clocks = <&tegra_car TEGRA20_CLK_GR3D>; + resets = <&tegra_car 24>; + reset-names = "3d"; }; dc@54200000 { @@ -199,6 +254,8 @@ Example: clocks = <&tegra_car TEGRA20_CLK_DISP1>, <&tegra_car TEGRA20_CLK_PLL_P>; clock-names = "disp1", "parent"; + resets = <&tegra_car 27>; + reset-names = "dc"; rgb { status = "disabled"; @@ -212,6 +269,8 @@ Example: clocks = <&tegra_car TEGRA20_CLK_DISP2>, <&tegra_car TEGRA20_CLK_PLL_P>; clock-names = "disp2", "parent"; + resets = <&tegra_car 26>; + reset-names = "dc"; rgb { status = "disabled"; @@ -225,6 +284,8 @@ Example: clocks = <&tegra_car TEGRA20_CLK_HDMI>, <&tegra_car TEGRA20_CLK_PLL_D_OUT0>; clock-names = "hdmi", "parent"; + resets = <&tegra_car 51>; + reset-names = "hdmi"; status = "disabled"; }; @@ -242,6 +303,8 @@ Example: clocks = <&tegra_car TEGRA20_CLK_DSI>, <&tegra_car TEGRA20_CLK_PLL_D_OUT0>; clock-names = "dsi", "parent"; + resets = <&tegra_car 48>; + reset-names = "dsi"; status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt index 173fbaab687b..10d2afdb76f4 100644 --- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt @@ -47,6 +47,10 @@ Required properties: - fast-clk Tegra114: - div-clk +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - i2c Example: @@ -58,5 +62,7 @@ Example: #size-cells = <0>; clocks = <&tegra_car 12>, <&tegra_car 124>; clock-names = "div-clk", "fast-clk"; + resets = <&tegra_car 12>; + reset-names = "i2c"; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt index 7d5a53dd77d1..0382b8bd69c6 100644 --- a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt +++ b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt @@ -15,6 +15,10 @@ Required properties: devicetree/bindings/input/matrix-keymap.txt. - clocks: Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - kbc Optional properties, in addition to those specified by the shared matrix-keyboard bindings: @@ -34,6 +38,8 @@ keyboard: keyboard { reg = <0x7000e200 0x100>; interrupts = <0 85 0x04>; clocks = <&tegra_car 36>; + resets = <&tegra_car 36>; + reset-names = "kbc"; nvidia,ghost-filter; nvidia,debounce-delay-ms = <640>; nvidia,kbc-row-pins = <0 1 2>; /* pin 0, 1, 2 as rows */ diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt index f727902a9e8d..f357c16ea815 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt @@ -10,6 +10,10 @@ Required properties: - compatible : Should be "nvidia,<chip>-sdhci" - clocks : Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - sdhci Optional properties: - power-gpios : Specify GPIOs for power control @@ -21,6 +25,8 @@ sdhci@c8000200 { reg = <0xc8000200 0x200>; interrupts = <47>; clocks = <&tegra_car 14>; + resets = <&tegra_car 14>; + reset-names = "sdhci"; cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 155 0>; /* gpio PT3 */ diff --git a/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt b/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt index a97fe575ca29..5ae601e7f51f 100644 --- a/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt +++ b/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt @@ -15,3 +15,7 @@ Required properties: - fast-clk Tegra114: - div-clk +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - i2c diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt index 9e22da7393a3..24cee06915c9 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt @@ -47,9 +47,14 @@ Required properties: - clock-names: Must include the following entries: - pex - afi - - pcie_xclk - pll_e - cml (not required for Tegra20) +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - pex + - afi + - pcie_x Root ports are defined as subnodes of the PCIe controller node. @@ -91,9 +96,10 @@ SoC DTSI: 0x82000000 0 0xa0000000 0xa0000000 0 0x10000000 /* non-prefetchable memory */ 0xc2000000 0 0xb0000000 0xb0000000 0 0x10000000>; /* prefetchable memory */ - clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>, - <&tegra_car 118>; - clock-names = "pex", "afi", "pcie_xclk", "pll_e"; + clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 118>; + clock-names = "pex", "afi", "pll_e"; + resets = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>; + reset-names = "pex", "afi", "pcie_x"; status = "disabled"; pci@1,0 { diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt index f28128717dcc..c7ea9d4a988b 100644 --- a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt @@ -9,6 +9,10 @@ Required properties: the cells format. - clocks: Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - pwm Example: @@ -17,4 +21,6 @@ Example: reg = <0x7000a000 0x100>; #pwm-cells = <2>; clocks = <&tegra_car 17>; + resets = <&tegra_car 17>; + reset-names = "pwm"; }; diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt index 11eb6e71ddd6..74ebd4c2f99d 100644 --- a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt +++ b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt @@ -8,6 +8,10 @@ Required properties: request selector for this UART controller. - clocks: Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - serial Optional properties: - nvidia,enable-modem-interrupt: Enable modem interrupts. Should be enable @@ -23,5 +27,7 @@ serial@70006000 { nvidia,dma-request-selector = <&apbdma 8>; nvidia,enable-modem-interrupt; clocks = <&tegra_car 6>; + resets = <&tegra_car 6>; + reset-names = "serial"; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt index 37f4ebf5b184..2b6817f6e40e 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt @@ -6,6 +6,10 @@ Required properties: - interrupts : Should contain AC97 interrupt - clocks : Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - ac97 - nvidia,dma-request-selector : The Tegra DMA controller's phandle and request selector for the AC97 controller - nvidia,codec-reset-gpio : The Tegra GPIO controller's phandle and the number @@ -23,4 +27,6 @@ ac97@70002000 { nvidia,codec-reset-gpio = <&gpio 170 0>; nvidia,codec-sync-gpio = <&gpio 120 0>; clocks = <&tegra_car 3>; + resets = <&tegra_car 3>; + reset-names = "ac97"; }; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt index ba0c9452916d..8b070aeca3db 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt @@ -6,6 +6,10 @@ Required properties: - interrupts : Should contain I2S interrupt - clocks : Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - i2s - nvidia,dma-request-selector : The Tegra DMA controller's phandle and request selector for this I2S controller @@ -17,4 +21,6 @@ i2s@70002800 { interrupts = < 45 >; nvidia,dma-request-selector = < &apbdma 2 >; clocks = <&tegra_car 11>; + resets = <&tegra_car 11>; + reset-names = "i2s"; }; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt index 7299eeadd588..60d59a54ca07 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt @@ -15,6 +15,11 @@ Required properties: - clocks : Must contain an entry for each entry in clock-names. See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entries: + - d_audio + - apbif +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: Tegra30 and later: - d_audio - apbif @@ -26,7 +31,7 @@ Required properties: - dam0 - dam1 - dam2 - - spdif_in + - spdif Tegra114 and later additionally require: - amx - adx @@ -48,13 +53,15 @@ ahub@70080000 { reg = <0x70080000 0x200 0x70080200 0x100>; interrupts = < 0 103 0x04 >; nvidia,dma-request-selector = <&apbdma 1>; - clocks = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>, + clocks = <&tegra_car 106>, <&tegra_car 107>; + clock-names = "d_audio", "apbif"; + resets = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>, <&tegra_car 11>, <&tegra_car 18>, <&tegra_car 101>, <&tegra_car 102>, <&tegra_car 108>, <&tegra_car 109>, - <&tegra_car 110>, <&tegra_car 162>; - clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2", + <&tegra_car 110>, <&tegra_car 10>; + reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2", "i2s3", "i2s4", "dam0", "dam1", "dam2", - "spdif_in"; + "spdif"; ranges; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt index 7a3112bc135c..0c113ffe3814 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt @@ -5,6 +5,10 @@ Required properties: - reg : Should contain I2S registers location and length - clocks : Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - i2s - nvidia,ahub-cif-ids : The list of AHUB CIF IDs for this port, rx (playback) first, tx (capture) second. See nvidia,tegra30-ahub.txt for values. @@ -15,4 +19,6 @@ i2s@70080300 { reg = <0x70080300 0x100>; nvidia,ahub-cif-ids = <4 4>; clocks = <&tegra_car 11>; + resets = <&tegra_car 11>; + reset-names = "i2s"; }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt index d4f2d534934b..fcd9f67999de 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt @@ -10,6 +10,10 @@ Required properties: See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entries: - spi +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - spi Recommended properties: - spi-max-frequency: Definition as per @@ -26,5 +30,7 @@ spi@7000d600 { #size-cells = <0>; clocks = <&tegra_car 44>; clock-names = "spi"; + resets = <&tegra_car 44>; + reset-names = "spi"; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt index 66e16c7f5939..e144f144717f 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt @@ -8,6 +8,10 @@ Required properties: request selector for this SFLASH controller. - clocks : Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - spi Recommended properties: - spi-max-frequency: Definition as per @@ -24,5 +28,7 @@ spi@7000c380 { #address-cells = <1>; #size-cells = <0>; clocks = <&tegra_car 43>; + resets = <&tegra_car 43>; + reset-names = "spi"; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt index 0e6e94eb2b2a..9393e28f444b 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt @@ -8,6 +8,10 @@ Required properties: request selector for this SLINK controller. - clocks : Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - spi Recommended properties: - spi-max-frequency: Definition as per @@ -24,5 +28,7 @@ spi@7000d600 { #address-cells = <1>; #size-cells = <0>; clocks = <&tegra_car 44>; + resets = <&tegra_car 44>; + reset-names = "spi"; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt index b98d0bdfa248..3dc9140e3dfb 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt @@ -10,6 +10,10 @@ Required properties : - nvidia,phy : phandle of the PHY that the controller is connected to. - clocks : Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. + - resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names : Must include the following entries: + - usb Optional properties: - nvidia,needs-double-reset : boolean is to be set for some of the Tegra20 |
