summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/i2c/i2c-gpio.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/i2c/i2c-gpio.txt')
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-gpio.txt46
1 files changed, 0 insertions, 46 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt
deleted file mode 100644
index 38a05562d1d2..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Device-Tree bindings for i2c gpio driver
-
-Required properties:
- - compatible = "i2c-gpio";
- - sda-gpios: gpio used for the sda signal, this should be flagged as
- active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
- from <dt-bindings/gpio/gpio.h> since the signal is by definition
- open drain.
- - scl-gpios: gpio used for the scl signal, this should be flagged as
- active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
- from <dt-bindings/gpio/gpio.h> since the signal is by definition
- open drain.
-
-Optional properties:
- - i2c-gpio,scl-output-only: scl as output only
- - i2c-gpio,delay-us: delay between GPIO operations (may depend on each platform)
- - i2c-gpio,timeout-ms: timeout to get data
-
-Deprecated properties, do not use in new device tree sources:
- - gpios: sda and scl gpio, alternative for {sda,scl}-gpios
- - i2c-gpio,sda-open-drain: this means that something outside of our
- control has put the GPIO line used for SDA into open drain mode, and
- that something is not the GPIO chip. It is essentially an
- inconsistency flag.
- - i2c-gpio,scl-open-drain: this means that something outside of our
- control has put the GPIO line used for SCL into open drain mode, and
- that something is not the GPIO chip. It is essentially an
- inconsistency flag.
-
-Example nodes:
-
-#include <dt-bindings/gpio/gpio.h>
-
-i2c@0 {
- compatible = "i2c-gpio";
- sda-gpios = <&pioA 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- scl-gpios = <&pioA 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <2>; /* ~100 kHz */
- #address-cells = <1>;
- #size-cells = <0>;
-
- rv3029c2@56 {
- compatible = "rv3029c2";
- reg = <0x56>;
- };
-};
OpenPOWER on IntegriCloud