diff options
| -rw-r--r-- | arch/powerpc/boot/dts/charon.dts | 236 | ||||
| -rw-r--r-- | arch/powerpc/configs/52xx/tqm5200_defconfig | 20 | ||||
| -rw-r--r-- | arch/powerpc/platforms/52xx/mpc5200_simple.c | 1 |
3 files changed, 249 insertions, 8 deletions
diff --git a/arch/powerpc/boot/dts/charon.dts b/arch/powerpc/boot/dts/charon.dts new file mode 100644 index 000000000000..0e00e508eaa6 --- /dev/null +++ b/arch/powerpc/boot/dts/charon.dts @@ -0,0 +1,236 @@ +/* + * charon board Device Tree Source + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz <m8@semihalf.com> + * + * Copyright (C) 2010 DENX Software Engineering GmbH + * Heiko Schocher <hs@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "anon,charon"; + compatible = "anon,charon"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + fsl,has-wdt; + }; + + can@900 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 17 0>; + reg = <0x900 0x80>; + }; + + can@980 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 18 0>; + reg = <0x980 0x80>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + usb@1000 { + compatible = "fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0xff>; + interrupts = <2 6 0>; + }; + + dma-controller@1200 { + device_type = "dma-controller"; + compatible = "fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + serial@2000 { // PSC1 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + serial@2400 { // PSC3 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2400 0x100>; + interrupts = <2 3 0>; + }; + + ethernet@3000 { + compatible = "fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + fixed-link = <1 1 100 0 0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + }; + + ata@3a00 { + compatible = "fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + }; + + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + + dtt@28 { + compatible = "national,lm80"; + reg = <0x28>; + }; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + localbus { + compatible = "fsl,mpc5200-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = < 0 0 0xfc000000 0x02000000 + 1 0 0xe0000000 0x04000000 // CS1 range, SM501 + 3 0 0xe8000000 0x00080000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <4>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + + display@1,0 { + compatible = "smi,sm501"; + reg = <1 0x00000000 0x00800000 + 1 0x03e00000 0x00200000>; + mode = "640x480-32@60"; + interrupts = <1 1 3>; + little-endian; + }; + + mram0@3,0 { + compatible = "mtd-ram"; + reg = <3 0x00000 0x80000>; + bank-width = <1>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 + 0xc000 0 0 2 &mpc5200_pic 0 0 3 + 0xc000 0 0 3 &mpc5200_pic 0 0 3 + 0xc000 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index 959cd2cfc275..716a37be16e3 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -1,9 +1,10 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_SPARSE_IRQ=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y +CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set # CONFIG_EPOLL is not set @@ -17,7 +18,6 @@ CONFIG_PPC_MPC5200_SIMPLE=y CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_PPC_PMAC is not set CONFIG_PPC_BESTCOMM=y -CONFIG_SPARSE_IRQ=y CONFIG_PM=y # CONFIG_PCI is not set CONFIG_NET=y @@ -38,17 +38,18 @@ CONFIG_MTD=y CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_ROM=y CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_PLATRAM=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=32768 -# CONFIG_MISC_DEVICES is not set CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y CONFIG_ATA=y @@ -56,13 +57,11 @@ CONFIG_PATA_MPC52xx=y CONFIG_PATA_PLATFORM=y CONFIG_NETDEVICES=y CONFIG_LXT_PHY=y +CONFIG_FIXED_PHY=y CONFIG_NET_ETHERNET=y CONFIG_FEC_MPC52xx=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 @@ -70,7 +69,13 @@ CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MPC=y +CONFIG_SENSORS_LM80=y CONFIG_WATCHDOG=y +CONFIG_MFD_SM501=y +CONFIG_FB=y +CONFIG_FB_FOREIGN_ENDIAN=y +CONFIG_FB_SM501=y +CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set @@ -80,10 +85,10 @@ CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_STORAGE=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_DS1374=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_INOTIFY=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_PROC_KCORE=y @@ -102,7 +107,6 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c index e36d6e232ae6..846b789fb195 100644 --- a/arch/powerpc/platforms/52xx/mpc5200_simple.c +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c @@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void) /* list of the supported boards */ static const char *board[] __initdata = { + "anon,charon", "intercontrol,digsy-mtc", "manroland,mucmc52", "manroland,uc101", |
