diff options
73 files changed, 2983 insertions, 1230 deletions
diff --git a/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt b/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt new file mode 100644 index 000000000000..2726c1d58a79 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt @@ -0,0 +1,49 @@ +Binding for Samsung S2M and S5M family clock generator block +============================================================ + +This is a part of device tree bindings for S2M and S5M family multi-function +devices. +More information can be found in bindings/mfd/sec-core.txt file. + +The S2MPS11/13/15 and S5M8767 provide three(AP/CP/BT) buffered 32.768 kHz +outputs. The S2MPS14 provides two (AP/BT) buffered 32.768 KHz outputs. + +To register these as clocks with common clock framework instantiate under +main device node a sub-node named "clocks". + +It uses the common clock binding documented in: + - Documentation/devicetree/bindings/clock/clock-bindings.txt + + +Required properties of the "clocks" sub-node: + - #clock-cells: should be 1. + - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk", + "samsung,s2mps14-clk", "samsung,s5m8767-clk" + The S2MPS15 uses the same compatible as S2MPS13, as both provides similar + clocks. + + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + Clock ID Devices + ---------------------------------------------------------- + 32KhzAP 0 S2MPS11/13/14/15, S5M8767 + 32KhzCP 1 S2MPS11/13/15, S5M8767 + 32KhzBT 2 S2MPS11/13/14/15, S5M8767 + +Include dt-bindings/clock/samsung,s2mps11.h file to use preprocessor defines +in device tree sources. + + +Example: + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + + s2m_osc: clocks { + compatible = "samsung,s2mps11-clk"; + #clock-cells = <1>; + clock-output-names = "xx", "yy", "zz"; + }; + }; diff --git a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt index dd5d2c0394b1..4d6c8cdc8586 100644 --- a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt @@ -24,7 +24,7 @@ controller. - #interrupt-cells : Specifies the number of cells needed to encode an interrupt. Shall be set to 2. The first cell defines the interrupt number, the second encodes the triger flags encoded as described in - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - interrupt-parent : The parent interrupt controller. - interrupts : The interrupt to the parent controller raised when GPIOs generate the interrupts. diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index 18be0cbfb456..9b30011ecabe 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -1,4 +1,4 @@ -Wolfson Arizona class audio SoCs +Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs These devices are audio SoCs with extensive digital capabilites and a range of analogue I/O. @@ -6,12 +6,14 @@ of analogue I/O. Required properties: - compatible : One of the following chip-specific strings: + "cirrus,cs47l24" "wlf,wm5102" "wlf,wm5110" "wlf,wm8280" "wlf,wm8997" "wlf,wm8998" "wlf,wm1814" + "wlf,wm1831" - reg : I2C slave address when connected using I2C, chip select number when using SPI. @@ -24,7 +26,7 @@ Required properties: - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - gpio-controller : Indicates this device is a GPIO controller. - #gpio-cells : Must be 2. The first cell is the pin number and the @@ -41,10 +43,21 @@ Required properties: - SPKVDD-supply : Speaker driver power supply (wm8997) + - DCVDD-supply : Main power supply (cs47l24, wm1831) + + - MICVDD-supply : Microphone power supply (cs47l24, wm1831) + Optional properties: - wlf,reset : GPIO specifier for the GPIO controlling /RESET + - clocks: Should reference the clocks supplied on MCLK1 and MCLK2 + - clock-names: Should contains two strings: + "mclk1" for the clock supplied on MCLK1, recommended to be a high + quality audio reference clock + "mclk2" for the clock supplied on MCLK2, recommended to be an always on + 32k clock + - wlf,gpio-defaults : A list of GPIO configuration register values. Defines for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If absent, no configuration of these registers is performed. If any entry has @@ -59,6 +72,12 @@ Optional properties: that have not been specified are set to 0 by default. Entries are: <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997) <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814) + - wlf,out-mono : A list of boolean values indicating whether each output is + mono or stereo. Position within the list indicates the output affected + (eg. First entry in the list corresponds to output 1). A non-zero value + indicates a mono output. If present, the number of values should be less + than or equal to the number of outputs, if less values are supplied the + additional outputs will be treated as stereo. - wlf,dmic-ref : DMIC reference voltage source for each input, can be selected from either MICVDD or one of the MICBIAS's, defines @@ -69,6 +88,7 @@ Optional properties: - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if they are being externally supplied. As covered in Documentation/devicetree/bindings/regulator/regulator.txt + (wm5102, wm5110, wm8280, wm8997, wm8998, wm1814) Also see child specific device properties: Regulator - ../regulator/arizona-regulator.txt diff --git a/Documentation/devicetree/bindings/mfd/palmas.txt b/Documentation/devicetree/bindings/mfd/palmas.txt index eda898978d33..8ae1a32bfb7e 100644 --- a/Documentation/devicetree/bindings/mfd/palmas.txt +++ b/Documentation/devicetree/bindings/mfd/palmas.txt @@ -24,7 +24,7 @@ and also the generic series names - #interrupt-cells : should be set to 2 for IRQ number and flags The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - interrupt-parent : The parent interrupt controller. Optional properties: diff --git a/Documentation/devicetree/bindings/mfd/s2mpa01.txt b/Documentation/devicetree/bindings/mfd/s2mpa01.txt deleted file mode 100644 index c13d3d8c3947..000000000000 --- a/Documentation/devicetree/bindings/mfd/s2mpa01.txt +++ /dev/null @@ -1,90 +0,0 @@ - -* Samsung S2MPA01 Voltage and Current Regulator - -The Samsung S2MPA01 is a multi-function device which includes high -efficiency buck converters including Dual-Phase buck converter, various LDOs, -and an RTC. It is interfaced to the host controller using an I2C interface. -Each sub-block is addressed by the host system using different I2C slave -addresses. - -Required properties: -- compatible: Should be "samsung,s2mpa01-pmic". -- reg: Specifies the I2C slave address of the PMIC block. It should be 0x66. - -Optional properties: -- interrupt-parent: Specifies the phandle of the interrupt controller to which - the interrupts from s2mpa01 are delivered to. -- interrupts: An interrupt specifier for the sole interrupt generated by the - device. - -Optional nodes: -- regulators: The regulators of s2mpa01 that have to be instantiated should be - included in a sub-node named 'regulators'. Regulator nodes and constraints - included in this sub-node use the standard regulator bindings which are - documented elsewhere. - -Properties for BUCK regulator nodes: -- regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500 - (default), 25000, or 50000. May be 0 for disabling the ramp delay on - BUCK{1,2,3,4}. - - In the absence of the regulator-ramp-delay property, the default ramp - delay will be used. - - NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set - for a particular group of BUCKs. So provide same regulator-ramp-delay=<value>. - - The following BUCKs share ramp settings: - * 1 and 6 - * 2 and 4 - * 8, 9, and 10 - -The following are the names of the regulators that the s2mpa01 PMIC block -supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number -as per the datasheet of s2mpa01. - - - LDOn - - valid values for n are 1 to 26 - - Example: LDO1, LD02, LDO26 - - BUCKn - - valid values for n are 1 to 10. - - Example: BUCK1, BUCK2, BUCK9 - -Example: - - s2mpa01_pmic@66 { - compatible = "samsung,s2mpa01-pmic"; - reg = <0x66>; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDDQ_MMC2"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - regulator-ramp-delay = <50000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt deleted file mode 100644 index 09b94c97faac..000000000000 --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ /dev/null @@ -1,153 +0,0 @@ - -* Samsung S2MPS11/13/14/15 and S2MPU02 Voltage and Current Regulator - -The Samsung S2MPS11 is a multi-function device which includes voltage and -current regulators, RTC, charger controller and other sub-blocks. It is -interfaced to the host controller using an I2C interface. Each sub-block is -addressed by the host system using different I2C slave addresses. - -Required properties: -- compatible: Should be one of the following - - "samsung,s2mps11-pmic" - - "samsung,s2mps13-pmic" - - "samsung,s2mps14-pmic" - - "samsung,s2mps15-pmic" - - "samsung,s2mpu02-pmic". -- reg: Specifies the I2C slave address of the pmic block. It should be 0x66. - -Optional properties: -- interrupt-parent: Specifies the phandle of the interrupt controller to which - the interrupts from s2mps11 are delivered to. -- interrupts: Interrupt specifiers for interrupt sources. -- samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled - down. When the system is suspended it will always go down thus triggerring - unwanted buck warm reset (setting buck voltages to default values). -- samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is - connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1 - register to turn off the power. Usually the ACOKB is pulled up to VBATT so - when PWRHOLD pin goes low, the rising ACOKB will trigger power off. - -Optional nodes: -- clocks: s2mps11, s2mps13, s2mps15 and s5m8767 provide three(AP/CP/BT) buffered 32.768 - KHz outputs, so to register these as clocks with common clock framework - instantiate a sub-node named "clocks". It uses the common clock binding - documented in : - [Documentation/devicetree/bindings/clock/clock-bindings.txt] - The s2mps14 provides two (AP/BT) buffered 32.768 KHz outputs. - - #clock-cells: should be 1. - - - The following is the list of clocks generated by the controller. Each clock - is assigned an identifier and client nodes use this identifier to specify - the clock which they consume. - Clock ID Devices - ---------------------------------------------------------- - 32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767 - 32KhzCP 1 S2MPS11, S2MPS13, S2MPS15, S5M8767 - 32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767 - - - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk", - "samsung,s2mps14-clk", "samsung,s5m8767-clk" - The s2msp15 uses the same compatible as s2mps13, as both provides similar clocks. - -- regulators: The regulators of s2mps11 that have to be instantiated should be -included in a sub-node named 'regulators'. Regulator nodes included in this -sub-node should be of the format as listed below. - - regulator_name { - [standard regulator constraints....]; - }; - - regulator-ramp-delay for BUCKs = [6250/12500/25000(default)/50000] uV/us - - BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explicitly - regulator-ramp-delay = <0> can be used for them to disable ramp delay. - In the absence of the regulator-ramp-delay property, the default ramp - delay will be used. - -NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set -for a particular group of BUCKs. So provide same regulator-ramp-delay<value>. -Grouping of BUCKs sharing ramp rate setting is as follow : BUCK[1, 6], -BUCK[3, 4], and BUCK[7, 8, 10] - -On S2MPS14 the LDO10, LDO11 and LDO12 can be configured to external control -over GPIO. To turn this feature on this property must be added to the regulator -sub-node: - - samsung,ext-control-gpios: GPIO specifier for one GPIO - controlling this regulator (enable/disable); -Example: - LDO12 { - regulator-name = "V_EMMC_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - samsung,ext-control-gpios = <&gpk0 2 0>; - }; - - -The regulator constraints inside the regulator nodes use the standard regulator -bindings which are documented elsewhere. - -The following are the names of the regulators that the s2mps11 pmic block -supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number -as per the datasheet of s2mps11. - - - LDOn - - valid values for n are: - - S2MPS11: 1 to 38 - - S2MPS13: 1 to 40 - - S2MPS14: 1 to 25 - - S2MPS15: 1 to 27 - - S2MPU02: 1 to 28 - - Example: LDO1, LDO2, LDO28 - - BUCKn - - valid values for n are: - - S2MPS11: 1 to 10 - - S2MPS13: 1 to 10 - - S2MPS14: 1 to 5 - - S2MPS15: 1 to 10 - - S2MPU02: 1 to 7 - - Example: BUCK1, BUCK2, BUCK9 - -Example: - - s2mps11_pmic@66 { - compatible = "samsung,s2mps11-pmic"; - reg = <0x66>; - - s2m_osc: clocks { - compatible = "samsung,s2mps11-clk"; - #clock-cells = <1>; - clock-output-names = "xx", "yy", "zz"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ABB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDD_ALIVE_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - regulator-ramp-delay = <50000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt new file mode 100644 index 000000000000..cdd079bfc287 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt @@ -0,0 +1,88 @@ +Binding for Samsung S2M and S5M family multi-function device +============================================================ + +This is a part of device tree bindings for S2M and S5M family multi-function +devices. + +The Samsung S2MPA01, S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family +of multi-function devices which include voltage and current regulators, RTC, +charger controller, clock outputs and other sub-blocks. It is interfaced +to the host controller using an I2C interface. Each sub-block is usually +addressed by the host system using different I2C slave addresses. + + +This document describes bindings for main device node. Optional sub-blocks +must be a sub-nodes to it. Bindings for them can be found in: + - bindings/regulator/samsung,s2mpa01.txt + - bindings/regulator/samsung,s2mps11.txt + - bindings/regulator/samsung,s5m8767.txt + - bindings/clock/samsung,s2mps11.txt + + +Required properties: + - compatible: Should be one of the following + - "samsung,s2mpa01-pmic", + - "samsung,s2mps11-pmic", + - "samsung,s2mps13-pmic", + - "samsung,s2mps14-pmic", + - "samsung,s2mps15-pmic", + - "samsung,s2mpu02-pmic", + - "samsung,s5m8767-pmic". + - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. + +Optional properties: + - interrupt-parent: Specifies the phandle of the interrupt controller to which + the interrupts from s2mps11 are delivered to. + - interrupts: Interrupt specifiers for interrupt sources. + - samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled + down. When the system is suspended it will always go down thus triggerring + unwanted buck warm reset (setting buck voltages to default values). + - samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is + connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1 + register to turn off the power. Usually the ACOKB is pulled up to VBATT so + when PWRHOLD pin goes low, the rising ACOKB will trigger power off. + +Example: + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + + s2m_osc: clocks { + compatible = "samsung,s2mps11-clk"; + #clock-cells = <1>; + clock-output-names = "xx", "yy", "zz"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <50000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt index fe8150bb3248..408f768686f1 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.txt +++ b/Documentation/devicetree/bindings/mfd/syscon.txt @@ -13,6 +13,10 @@ Required properties: - compatible: Should contain "syscon". - reg: the register region can be accessed from syscon +Optional property: +- reg-io-width: the size (in bytes) of the IO accesses that should be + performed on the device. + Examples: gpr: iomuxc-gpr@020e0000 { compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; diff --git a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt deleted file mode 100644 index 20191315e444..000000000000 --- a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt +++ /dev/null @@ -1,163 +0,0 @@ -* Samsung S5M8767 Voltage and Current Regulator - -The Samsung S5M8767 is a multi-function device which includes voltage and -current regulators, rtc, charger controller and other sub-blocks. It is -interfaced to the host controller using a i2c interface. Each sub-block is -addressed by the host system using different i2c slave address. This document -describes the bindings for 'pmic' sub-block of s5m8767. - -Required properties: -- compatible: Should be "samsung,s5m8767-pmic". -- reg: Specifies the i2c slave address of the pmic block. It should be 0x66. - -- s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV) - units for buck2 when changing voltage using gpio dvs. Refer to [1] below - for additional information. - -- s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV) - units for buck3 when changing voltage using gpio dvs. Refer to [1] below - for additional information. - -- s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV) - units for buck4 when changing voltage using gpio dvs. Refer to [1] below - for additional information. - -- s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used - for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines. - -[1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional - property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage' - property should specify atleast one voltage level (which would be a - safe operating voltage). - - If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional - property is specified, then all the eight voltage values for the - 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified. - -Optional properties: -- interrupt-parent: Specifies the phandle of the interrupt controller to which - the interrupts from s5m8767 are delivered to. -- interrupts: Interrupt specifiers for two interrupt sources. - - First interrupt specifier is for 'irq1' interrupt. - - Second interrupt specifier is for 'alert' interrupt. -- s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs. -- s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs. -- s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs. - -Additional properties required if either of the optional properties are used: - -- s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from - the possible 8 options selectable by the dvs gpios. The value of this - property should be between 0 and 7. If not specified or if out of range, the - default value of this property is set to 0. - -- s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used - for dvs. The format of the gpio specifier depends in the gpio controller. - -Regulators: The regulators of s5m8767 that have to be instantiated should be -included in a sub-node named 'regulators'. Regulator nodes included in this -sub-node should be of the format as listed below. - - regulator_name { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE_1.0V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; /* Normal Mode */ - }; - }; -The above regulator entries are defined in regulator bindings documentation -except these properties: - - op_mode: describes the different operating modes of the LDO's with - power mode change in SOC. The different possible values are, - 0 - always off mode - 1 - on in normal mode - 2 - low power mode - 3 - suspend mode - - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one - GPIO controlling this regulator (enable/disable); This is - valid only for buck9. - -The following are the names of the regulators that the s5m8767 pmic block -supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number -as per the datasheet of s5m8767. - - - LDOn - - valid values for n are 1 to 28 - - Example: LDO1, LDO2, LDO28 - - BUCKn - - valid values for n are 1 to 9. - - Example: BUCK1, BUCK2, BUCK9 - -The bindings inside the regulator nodes use the standard regulator bindings -which are documented elsewhere. - -Example: - - s5m8767_pmic@66 { - compatible = "samsung,s5m8767-pmic"; - reg = <0x66>; - - s5m8767,pmic-buck2-uses-gpio-dvs; - s5m8767,pmic-buck3-uses-gpio-dvs; - s5m8767,pmic-buck4-uses-gpio-dvs; - - s5m8767,pmic-buck-default-dvs-idx = <0>; - - s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */ - <&gpx0 1 0>, /* DVS2 */ - <&gpx0 2 0>; /* DVS3 */ - - s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */ - <&gpx2 4 0>, /* SET2 */ - <&gpx2 5 0>; /* SET3 */ - - s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, - <1250000>, <1200000>, - <1150000>, <1100000>, - <1000000>, <950000>; - - s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, - <1100000>, <1100000>, - <1000000>, <1000000>, - <1000000>, <1000000>; - - s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ABB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - op_mode = <1>; /* Normal Mode */ - }; - - ldo2_reg: LDO2 { - regulator-name = "VDD_ALIVE_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "VDD_MIF_1.2V"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - vemmc_reg: BUCK9 { - regulator-name = "VMEM_VDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - op_mode = <3>; /* Standby Mode */ - s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt new file mode 100644 index 000000000000..bae3c7f838cf --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt @@ -0,0 +1,79 @@ +Binding for Samsung S2MPA01 regulator block +=========================================== + +This is a part of device tree bindings for S2M family multi-function devices. +More information can be found in bindings/mfd/sec-core.txt file. + +The S2MPA01 device provide buck and LDO regulators. + +To register these with regulator framework instantiate under main device node +a sub-node named "regulators" with more sub-nodes for each regulator using the +common regulator binding documented in: + - Documentation/devicetree/bindings/regulator/regulator.txt + + +Names of regulators supported by S2MPA01 device: + - LDOn + - valid values for n are 1 to 26 + - Example: LDO1, LD02, LDO26 + - BUCKn + - valid values for n are 1 to 10. + - Example: BUCK1, BUCK2, BUCK9 +Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number +as per the datasheet of device. + + +Optional properties of buck regulator nodes under "regulators" sub-node: + - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500 + (default), 25000, or 50000. May be 0 for disabling the ramp delay on + BUCK{1,2,3,4}. + + In the absence of the regulator-ramp-delay property, the default ramp + delay will be used. + + Note: Some bucks share the ramp rate setting i.e. same ramp value + will be set for a particular group of bucks so provide the same + regulator-ramp-delay value for them. + Groups sharing ramp rate: + - buck{1,6}, + - buck{2,4}, + - buck{8,9,10}. + +Example: + + s2mpa01_pmic@66 { + compatible = "samsung,s2mpa01-pmic"; + reg = <0x66>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDDQ_MMC2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <50000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt new file mode 100644 index 000000000000..27a48bf1b185 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt @@ -0,0 +1,102 @@ +Binding for Samsung S2M family regulator block +============================================== + +This is a part of device tree bindings for S2M family multi-function devices. +More information can be found in bindings/mfd/sec-core.txt file. + +The S2MPS11/13/14/15 and S2MPU02 devices provide buck and LDO regulators. + +To register these with regulator framework instantiate under main device node +a sub-node named "regulators" with more sub-nodes for each regulator using the +common regulator binding documented in: + - Documentation/devicetree/bindings/regulator/regulator.txt + + +Names of regulators supported by different devices: + - LDOn + - valid values for n are: + - S2MPS11: 1 to 38 + - S2MPS13: 1 to 40 + - S2MPS14: 1 to 25 + - S2MPS15: 1 to 27 + - S2MPU02: 1 to 28 + - Example: LDO1, LDO2, LDO28 + - BUCKn + - valid values for n are: + - S2MPS11: 1 to 10 + - S2MPS13: 1 to 10 + - S2MPS14: 1 to 5 + - S2MPS15: 1 to 10 + - S2MPU02: 1 to 7 + - Example: BUCK1, BUCK2, BUCK9 +Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number +as per the datasheet of device. + + +Optional properties of the nodes under "regulators" sub-node: + - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500, + 25000 (default) or 50000. + + Additionally S2MPS11 supports disabling ramp delay for BUCK{2,3,4,6} + by setting it to <0>. + + Note: On S2MPS11 some bucks share the ramp rate setting i.e. same ramp value + will be set for a particular group of bucks so provide the same + regulator-ramp-delay value for them. + Groups sharing ramp rate: + - buck{1,6}, + - buck{3,4}, + - buck{7,8,10}. + + - samsung,ext-control-gpios: On S2MPS14 the LDO10, LDO11 and LDO12 can be + configured to external control over GPIO. To turn this feature on this + property must be added to the regulator sub-node: + - samsung,ext-control-gpios: GPIO specifier for one GPIO + controlling this regulator (enable/disable) + Example: + LDO12 { + regulator-name = "V_EMMC_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + samsung,ext-control-gpios = <&gpk0 2 0>; + }; + + +Example: + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <50000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt new file mode 100644 index 000000000000..093edda0c8df --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt @@ -0,0 +1,145 @@ +Binding for Samsung S5M8767 regulator block +=========================================== + +This is a part of device tree bindings for S5M family multi-function devices. +More information can be found in bindings/mfd/sec-core.txt file. + +The S5M8767 device provide buck and LDO regulators. + +To register these with regulator framework instantiate under main device node +a sub-node named "regulators" with more sub-nodes for each regulator using the +common regulator binding documented in: + - Documentation/devicetree/bindings/regulator/regulator.txt + + +Required properties of the main device node (the parent!): + - s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV) + units for buck2 when changing voltage using gpio dvs. Refer to [1] below + for additional information. + + - s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV) + units for buck3 when changing voltage using gpio dvs. Refer to [1] below + for additional information. + + - s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV) + units for buck4 when changing voltage using gpio dvs. Refer to [1] below + for additional information. + + - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used + for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines. + + [1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional + property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage' + property should specify atleast one voltage level (which would be a + safe operating voltage). + + If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional + property is specified, then all the eight voltage values for the + 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified. + +Optional properties of the main device node (the parent!): + - s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs. + - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs. + - s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs. + +Additional properties required if either of the optional properties are used: + + - s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from + the possible 8 options selectable by the dvs gpios. The value of this + property should be between 0 and 7. If not specified or if out of range, the + default value of this property is set to 0. + + - s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used + for dvs. The format of the gpio specifier depends in the gpio controller. + + +Names of regulators supported by S5M8767 device: + - LDOn + - valid values for n are 1 to 28 + - Example: LDO1, LDO2, LDO28 + - BUCKn + - valid values for n are 1 to 9. + - Example: BUCK1, BUCK2, BUCK9 +Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number +as per the datasheet of device. + + +Optional properties of the nodes under "regulators" sub-node: + - op_mode: describes the different operating modes of the LDO's with + power mode change in SOC. The different possible values are, + 0 - always off mode + 1 - on in normal mode + 2 - low power mode + 3 - suspend mode + - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one + GPIO controlling this regulator + (enable/disable); This is valid only + for buck9. + +Example: + + s5m8767_pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + s5m8767,pmic-buck2-uses-gpio-dvs; + s5m8767,pmic-buck3-uses-gpio-dvs; + s5m8767,pmic-buck4-uses-gpio-dvs; + + s5m8767,pmic-buck-default-dvs-idx = <0>; + + s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */ + <&gpx0 1 0>, /* DVS2 */ + <&gpx0 2 0>; /* DVS3 */ + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */ + <&gpx2 4 0>, /* SET2 */ + <&gpx2 5 0>; /* SET3 */ + + s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1000000>, <1000000>, + <1000000>, <1000000>; + + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_MIF_1.2V"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vemmc_reg: BUCK9 { + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <3>; /* Standby Mode */ + s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt index e045e90a0924..68c4e8d96bed 100644 --- a/Documentation/devicetree/bindings/sound/wm8994.txt +++ b/Documentation/devicetree/bindings/sound/wm8994.txt @@ -30,7 +30,7 @@ Optional properties: - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - clocks : A list of up to two phandle and clock specifier pairs - clock-names : A list of clock names sorted in the same order as clocks. diff --git a/MAINTAINERS b/MAINTAINERS index a2956eb7ca95..ab68d0597542 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9285,8 +9285,10 @@ F: drivers/regulator/s5m*.c F: drivers/clk/clk-s2mps11.c F: drivers/rtc/rtc-s5m.c F: include/linux/mfd/samsung/ -F: Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt -F: Documentation/devicetree/bindings/mfd/s2mp*.txt +F: Documentation/devicetree/bindings/mfd/samsung,sec-core.txt +F: Documentation/devicetree/bindings/regulator/samsung,s2m*.txt +F: Documentation/devicetree/bindings/regulator/samsung,s5m*.txt +F: Documentation/devicetree/bindings/clock/samsung,s2mps11.txt SAMSUNG S5P/EXYNOS4 SOC SERIES CAMERA SUBSYSTEM DRIVERS M: Kyungmin Park <kyungmin.park@samsung.com> @@ -11743,6 +11745,7 @@ F: drivers/input/touchscreen/wm831x-ts.c F: drivers/input/touchscreen/wm97*.c F: drivers/mfd/arizona* F: drivers/mfd/wm*.c +F: drivers/mfd/cs47l24* F: drivers/power/wm83*.c F: drivers/rtc/rtc-wm83*.c F: drivers/regulator/wm8*.c @@ -11756,6 +11759,7 @@ F: include/linux/wm97xx.h F: include/sound/wm????.h F: sound/soc/codecs/arizona.? F: sound/soc/codecs/wm* +F: sound/soc/codecs/cs47l24* WORKQUEUE M: Tejun Heo <tj@kernel.org> diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c index ca002739616a..624ea5421995 100644 --- a/drivers/gpio/gpio-arizona.c +++ b/drivers/gpio/gpio-arizona.c @@ -122,6 +122,10 @@ static int arizona_gpio_probe(struct platform_device *pdev) case WM1814: arizona_gpio->gpio_chip.ngpio = 5; break; + case WM1831: + case CS47L24: + arizona_gpio->gpio_chip.ngpio = 2; + break; default: dev_err(&pdev->dev, "Unknown chip variant %d\n", arizona->type); diff --git a/drivers/mfd/88pm80x.c b/drivers/mfd/88pm80x.c index 63445ea6b0bf..3f24ecbe2576 100644 --- a/drivers/mfd/88pm80x.c +++ b/drivers/mfd/88pm80x.c @@ -135,7 +135,7 @@ EXPORT_SYMBOL_GPL(pm80x_deinit); #ifdef CONFIG_PM_SLEEP static int pm80x_suspend(struct device *dev) { - struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct i2c_client *client = to_i2c_client(dev); struct pm80x_chip *chip = i2c_get_clientdata(client); if (chip && chip->wu_flag) @@ -147,7 +147,7 @@ static int pm80x_suspend(struct device *dev) static int pm80x_resume(struct device *dev) { - struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct i2c_client *client = to_i2c_client(dev); struct pm80x_chip *chip = i2c_get_clientdata(client); if (chip && chip->wu_flag) diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c index 3269a9990b24..25e1aafae60c 100644 --- a/drivers/mfd/88pm860x-core.c +++ b/drivers/mfd/88pm860x-core.c @@ -705,10 +705,12 @@ int pm8606_osc_disable(struct pm860x_chip *chip, unsigned short client) chip->osc_status); mutex_lock(&chip->osc_lock); - /*Update voting status */ + /* Update voting status */ chip->osc_vote &= ~(client); - /* If reference group is off and this is the last client to release - * - turn off */ + /* + * If reference group is off and this is the last client to release + * - turn off + */ if ((chip->osc_status != PM8606_REF_GP_OSC_OFF) && (chip->osc_vote == REF_GP_NO_CLIENTS)) { chip->osc_status = PM8606_REF_GP_OSC_UNKNOWN; @@ -1218,7 +1220,7 @@ static int pm860x_remove(struct i2c_client *client) #ifdef CONFIG_PM_SLEEP static int pm860x_suspend(struct device *dev) { - struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct i2c_client *client = to_i2c_client(dev); struct pm860x_chip *chip = i2c_get_clientdata(client); if (device_may_wakeup(dev) && chip->wakeup_flag) @@ -1228,7 +1230,7 @@ static int pm860x_suspend(struct device *dev) static int pm860x_resume(struct device *dev) { - struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct i2c_client *client = to_i2c_client(dev); struct pm860x_chip *chip = i2c_get_clientdata(client); if (device_may_wakeup(dev) && chip->wakeup_flag) @@ -1265,6 +1267,7 @@ static struct i2c_driver pm860x_driver = { static int __init pm860x_i2c_init(void) { int ret; + ret = i2c_add_driver(&pm860x_driver); if (ret != 0) pr_err("Failed to register 88PM860x I2C driver: %d\n", ret); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 4d92df6ef9fe..9ca66de0c1c1 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -211,7 +211,7 @@ config MFD_DA9062 of the device. config MFD_DA9063 - bool "Dialog Semiconductor DA9063 PMIC Support" + tristate "Dialog Semiconductor DA9063 PMIC Support" select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -1370,24 +1370,30 @@ config MFD_ARIZONA bool config MFD_ARIZONA_I2C - tristate "Wolfson Microelectronics Arizona platform with I2C" + tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with I2C" select MFD_ARIZONA select MFD_CORE select REGMAP_I2C depends on I2C help - Support for the Wolfson Microelectronics Arizona platform audio SoC - core functionality controlled via I2C. + Support for the Cirrus Logic/Wolfson Microelectronics Arizona platform + audio SoC core functionality controlled via I2C. config MFD_ARIZONA_SPI - tristate "Wolfson Microelectronics Arizona platform with SPI" + tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with SPI" select MFD_ARIZONA select MFD_CORE select REGMAP_SPI depends on SPI_MASTER help - Support for the Wolfson Microelectronics Arizona platform audio SoC - core functionality controlled via I2C. + Support for the Cirrus Logic/Wolfson Microelectronics Arizona platform + audio SoC core functionality controlled via I2C. + +config MFD_CS47L24 + bool "Cirrus Logic CS47L24 and WM1831" + depends on MFD_ARIZONA + help + Support for Cirrus Logic CS47L24 and WM1831 low power audio SoC config MFD_WM5102 bool "Wolfson Microelectronics WM5102" diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index a8b76b81b467..0f230a6103f8 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -51,6 +51,9 @@ endif ifeq ($(CONFIG_MFD_WM8998),y) obj-$(CONFIG_MFD_ARIZONA) += wm8998-tables.o endif +ifeq ($(CONFIG_MFD_CS47L24),y) +obj-$(CONFIG_MFD_ARIZONA) += cs47l24-tables.o +endif obj-$(CONFIG_MFD_WM8400) += wm8400-core.o wm831x-objs := wm831x-core.o wm831x-irq.o wm831x-otp.o wm831x-objs += wm831x-auxadc.o @@ -61,7 +64,8 @@ wm8350-objs := wm8350-core.o wm8350-regmap.o wm8350-gpio.o wm8350-objs += wm8350-irq.o obj-$(CONFIG_MFD_WM8350) += wm8350.o obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o -obj-$(CONFIG_MFD_WM8994) += wm8994-core.o wm8994-irq.o wm8994-regmap.o +wm8994-objs := wm8994-core.o wm8994-irq.o wm8994-regmap.o +obj-$(CONFIG_MFD_WM8994) += wm8994.o obj-$(CONFIG_TPS6105X) += tps6105x.o obj-$(CONFIG_TPS65010) += tps65010.o diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c index 29b6a2d4ac72..3ba19a45f199 100644 --- a/drivers/mfd/aat2870-core.c +++ b/drivers/mfd/aat2870-core.c @@ -373,11 +373,8 @@ static int aat2870_i2c_probe(struct i2c_client *client, aat2870 = devm_kzalloc(&client->dev, sizeof(struct aat2870_data), GFP_KERNEL); - if (!aat2870) { - dev_err(&client->dev, - "Failed to allocate memory for aat2870\n"); + if (!aat2870) return -ENOMEM; - } aat2870->dev = &client->dev; dev_set_drvdata(aat2870->dev, aat2870); diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c index f0afb44271f8..6a5a98806cb8 100644 --- a/drivers/mfd/ab3100-core.c +++ b/drivers/mfd/ab3100-core.c @@ -381,9 +381,11 @@ static int ab3100_event_registers_startup_state_get(struct device *dev, u8 *event) { struct ab3100 *ab3100 = dev_get_drvdata(dev->parent); + if (!ab3100->startup_events_read) return -EAGAIN; /* Try again later */ memcpy(event, ab3100->startup_events, 3); + return 0; } @@ -858,10 +860,8 @@ static int ab3100_probe(struct i2c_client *client, int i; ab3100 = devm_kzalloc(&client->dev, sizeof(struct ab3100), GFP_KERNEL); - if (!ab3100) { - dev_err(&client->dev, "could not allocate AB3100 device\n"); + if (!ab3100) return -ENOMEM; - } /* Initialize data structure */ mutex_init(&ab3100->access_mutex); @@ -883,20 +883,17 @@ static int ab3100_probe(struct i2c_client *client, for (i = 0; ids[i].id != 0x0; i++) { if (ids[i].id == ab3100->chip_id) { - if (ids[i].name != NULL) { - snprintf(&ab3100->chip_name[0], - sizeof(ab3100->chip_name) - 1, - "AB3100 %s", - ids[i].name); + if (ids[i].name) break; - } else { - dev_err(&client->dev, - "AB3000 is not supported\n"); - goto exit_no_detect; - } + + dev_err(&client->dev, "AB3000 is not supported\n"); + goto exit_no_detect; } } + snprintf(&ab3100->chip_name[0], + sizeof(ab3100->chip_name) - 1, "AB3100 %s", ids[i].name); + if (ids[i].id == 0x0) { dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n", ab3100->chip_id); diff --git a/drivers/mfd/ab3100-otp.c b/drivers/mfd/ab3100-otp.c index f391c5fee1b0..55b207a4b336 100644 --- a/drivers/mfd/ab3100-otp.c +++ b/drivers/mfd/ab3100-otp.c @@ -188,10 +188,9 @@ static int __init ab3100_otp_probe(struct platform_device *pdev) int i; otp = devm_kzalloc(&pdev->dev, sizeof(struct ab3100_otp), GFP_KERNEL); - if (!otp) { - dev_err(&pdev->dev, "could not allocate AB3100 OTP device\n"); + if (!otp) return -ENOMEM; - } + otp->dev = &pdev->dev; /* Replace platform data coming in with a local struct */ diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index fefbe4cfa61d..f3d689176fc2 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -113,7 +113,7 @@ #define AB8500_SWITCH_OFF_STATUS 0x00 #define AB8500_TURN_ON_STATUS 0x00 -#define AB8505_TURN_ON_STATUS_2 0x04 +#define AB8505_TURN_ON_STATUS_2 0x04 #define AB8500_CH_USBCH_STAT1_REG 0x02 #define VBUS_DET_DBNC100 0x02 @@ -211,7 +211,7 @@ static int set_register_interruptible(struct ab8500 *ab8500, u8 bank, /* * Put the u8 bank and u8 register together into a an u16. * The bank on higher 8 bits and register in lower 8 bits. - * */ + */ u16 addr = ((u16)bank) << 8 | reg; dev_vdbg(ab8500->dev, "wr: addr %#x <= %#x\n", addr, data); @@ -243,8 +243,6 @@ static int get_register_interruptible(struct ab8500 *ab8500, u8 bank, u8 reg, u8 *value) { int ret; - /* put the u8 bank and u8 reg together into a an u16. - * bank on higher 8 bits and reg in lower */ u16 addr = ((u16)bank) << 8 | reg; mutex_lock(&ab8500->lock); @@ -278,8 +276,6 @@ static int mask_and_set_register_interruptible(struct ab8500 *ab8500, u8 bank, u8 reg, u8 bitmask, u8 bitvalues) { int ret; - /* put the u8 bank and u8 reg together into a an u16. - * bank on higher 8 bits and reg in lower */ u16 addr = ((u16)bank) << 8 | reg; mutex_lock(&ab8500->lock); @@ -449,12 +445,12 @@ static void update_latch_offset(u8 *offset, int i) { /* Fix inconsistent ITFromLatch25 bit mapping... */ if (unlikely(*offset == 17)) - *offset = 24; + *offset = 24; /* Fix inconsistent ab8540 bit mapping... */ if (unlikely(*offset == 16)) - *offset = 25; + *offset = 25; if ((i == 3) && (*offset >= 24)) - *offset += 2; + *offset += 2; } static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500, @@ -590,12 +586,12 @@ static int ab8500_irq_init(struct ab8500 *ab8500, struct device_node *np) /* If ->irq_base is zero this will give a linear mapping */ ab8500->domain = irq_domain_add_simple(ab8500->dev->of_node, - num_irqs, 0, - &ab8500_irq_ops, ab8500); + num_irqs, 0, + &ab8500_irq_ops, ab8500); if (!ab8500->domain) { dev_err(ab8500->dev, "Failed to create irqdomain\n"); - return -ENOSYS; + return -ENODEV; } return 0; @@ -609,442 +605,28 @@ int ab8500_suspend(struct ab8500 *ab8500) return 0; } -static struct resource ab8500_gpadc_resources[] = { - { - .name = "HW_CONV_END", - .start = AB8500_INT_GP_HW_ADC_CONV_END, - .end = AB8500_INT_GP_HW_ADC_CONV_END, - .flags = IORESOURCE_IRQ, - }, - { - .name = "SW_CONV_END", - .start = AB8500_INT_GP_SW_ADC_CONV_END, - .end = AB8500_INT_GP_SW_ADC_CONV_END, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource ab8505_gpadc_resources[] = { - { - .name = "SW_CONV_END", - .start = AB8500_INT_GP_SW_ADC_CONV_END, - .end = AB8500_INT_GP_SW_ADC_CONV_END, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource ab8500_rtc_resources[] = { - { - .name = "60S", - .start = AB8500_INT_RTC_60S, - .end = AB8500_INT_RTC_60S, - .flags = IORESOURCE_IRQ, - }, - { - .name = "ALARM", - .start = AB8500_INT_RTC_ALARM, - .end = AB8500_INT_RTC_ALARM, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource ab8540_rtc_resources[] = { - { - .name = "1S", - .start = AB8540_INT_RTC_1S, - .end = AB8540_INT_RTC_1S, - .flags = IORESOURCE_IRQ, - }, - { - .name = "ALARM", - .start = AB8500_INT_RTC_ALARM, - .end = AB8500_INT_RTC_ALARM, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource ab8500_poweronkey_db_resources[] = { - { - .name = "ONKEY_DBF", - .start = AB8500_INT_PON_KEY1DB_F, - .end = AB8500_INT_PON_KEY1DB_F, - .flags = IORESOURCE_IRQ, - }, - { - .name = "ONKEY_DBR", - .start = AB8500_INT_PON_KEY1DB_R, - .end = AB8500_INT_PON_KEY1DB_R, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource ab8500_av_acc_detect_resources[] = { - { - .name = "ACC_DETECT_1DB_F", - .start = AB8500_INT_ACC_DETECT_1DB_F, - .end = AB8500_INT_ACC_DETECT_1DB_F, - .flags = IORESOURCE_IRQ, - }, - { - .name = "ACC_DETECT_1DB_R", - .start = AB8500_INT_ACC_DETECT_1DB_R, - .end = AB8500_INT_ACC_DETECT_1DB_R, - .flags = IORESOURCE_IRQ, - }, - { - .name = "ACC_DETECT_21DB_F", - .start = AB8500_INT_ACC_DETECT_21DB_F, - .end = AB8500_INT_ACC_DETECT_21DB_F, - .flags = IORESOURCE_IRQ, - }, - { - .name = "ACC_DETECT_21DB_R", - .start = AB8500_INT_ACC_DETECT_21DB_R, - .end = AB8500_INT_ACC_DETECT_21DB_R, - .flags = IORESOURCE_IRQ, - }, - { - .name = "ACC_DETECT_22DB_F", - .start = AB8500_INT_ACC_DETECT_22DB_F, - .end = AB8500_INT_ACC_DETECT_22DB_F, - .flags = IORESOURCE_IRQ, - }, - { - .name = "ACC_DETECT_22DB_R", - .start = AB8500_INT_ACC_DETECT_22DB_R, - .end = AB8500_INT_ACC_DETECT_22DB_R, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource ab8500_charger_resources[] = { - { - .name = "MAIN_CH_UNPLUG_DET", - .start = AB8500_INT_MAIN_CH_UNPLUG_DET, - .end = AB8500_INT_MAIN_CH_UNPLUG_DET, - .flags = IORESOURCE_IRQ, - }, - { - .name = "MAIN_CHARGE_PLUG_DET", - .start = AB8500_INT_MAIN_CH_PLUG_DET, - .end = AB8500_INT_MAIN_CH_PLUG_DET, - .flags = IORESOURCE_IRQ, - }, - { - .name = "VBUS_DET_R", - .start = AB8500_INT_VBUS_DET_R, - .end = AB8500_INT_VBUS_DET_R, - .flags = IORESOURCE_IRQ, - }, - { - .name = "VBUS_DET_F", - .start = AB8500_INT_VBUS_DET_F, - .end = AB8500_INT_VBUS_DET_F, - .flags = IORESOURCE_IRQ, - }, - { - .name = "USB_LINK_STATUS", - .start = AB8500_INT_USB_LINK_STATUS, - .end = AB8500_INT_USB_LINK_STATUS, - .flags = IORESOURCE_IRQ, - }, - { - .name = "VBUS_OVV", - .start = AB8500_INT_VBUS_OVV, - .end = AB8500_INT_VBUS_OVV, - .flags = IORESOURCE_IRQ, - }, - { - .name = "USB_CH_TH_PROT_R", - .start = AB8500_INT_USB_CH_TH_PROT_R, - .end = AB8500_INT_USB_CH_TH_PROT_R, - .flags = IORESOURCE_IRQ, - }, - { - .name = "USB_CH_TH_PROT_F", - .start = AB8500_INT_USB_CH_TH_PROT_F, - .end = AB8500_INT_USB_CH_TH_PROT_F, - .flags = IORESOURCE_IRQ, - }, - { - .name = "MAIN_EXT_CH_NOT_OK", - .start = AB8500_INT_MAIN_EXT_CH_NOT_OK, - .end = AB8500_INT_MAIN_EXT_CH_NOT_OK, - .flags = IORESOURCE_IRQ, - }, - { - .name = "MAIN_CH_TH_PROT_R", - .start = AB8500_INT_MAIN_CH_TH_PROT_R, - .end = AB8500_INT_MAIN_CH_TH_PROT_R, - .flags = IORESOURCE_IRQ, - }, - { - .name = "MAIN_CH_TH_PROT_F", - .start = AB8500_INT_MAIN_CH_TH_PROT_F, - .end = AB8500_INT_MAIN_CH_TH_PROT_F, - .flags = IORESOURCE_IRQ, - }, - { - .name = "USB_CHARGER_NOT_OKR", - .start = AB8500_INT_USB_CHARGER_NOT_OKR, - .end = AB8500_INT_USB_CHARGER_NOT_OKR, - .flags = IORESOURCE_IRQ, - }, - { - .name = "CH_WD_EXP", - .start = AB8500_INT_CH_WD_EXP, - .end = AB8500_INT_CH_WD_EXP, - .flags = IORESOURCE_IRQ, - }, - { - .name = "VBUS_CH_DROP_END", - .start = AB8500_INT_VBUS_CH_DROP_END, - .end = AB8500_INT_VBUS_CH_DROP_END, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource ab8500_btemp_resources[] = { - { - .name = "BAT_CTRL_INDB", - .start = AB8500_INT_BAT_CTRL_INDB, - .end = AB8500_INT_BAT_CTRL_INDB, - .flags = IORESOURCE_IRQ, - }, - { - .name = "BTEMP_LOW", - .start = AB8500_INT_BTEMP_LOW, - .end = AB8500_INT_BTEMP_LOW, - .flags = IORESOURCE_IRQ, - }, - { - .name = "BTEMP_HIGH", - .start = AB8500_INT_BTEMP_HIGH, - .end = AB8500_INT_BTEMP_HIGH, - .flags = IORESOURCE_IRQ, - }, - { - .name = "BTEMP_LOW_MEDIUM", - .start = AB8500_INT_BTEMP_LOW_MEDIUM, - .end = AB8500_INT_BTEMP_LOW_MEDIUM, - .flags = IORESOURCE_IRQ, - }, - { - .name = "BTEMP_MEDIUM_HIGH", - .start = AB8500_INT_BTEMP_MEDIUM_HIGH, - .end = AB8500_INT_BTEMP_MEDIUM_HIGH, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource ab8500_fg_resources[] = { - { - .name = "NCONV_ACCU", - .start = AB8500_INT_CCN_CONV_ACC, - .end = AB8500_INT_CCN_CONV_ACC, - .flags = IORESOURCE_IRQ, - }, - { - .name = "BATT_OVV", - .start = AB8500_INT_BATT_OVV, - .end = AB8500_INT_BATT_OVV, - .flags = IORESOURCE_IRQ, - }, - { - .name = "LOW_BAT_F", - .start = AB8500_INT_LOW_BAT_F, - .end = AB8500_INT_LOW_BAT_F, - .flags = IORESOURCE_IRQ, - }, - { - .name = "LOW_BAT_R", - .start = AB8500_INT_LOW_BAT_R, - .end = AB8500_INT_LOW_BAT_R, - .flags = IORESOURCE_IRQ, - }, - { - .name = "CC_INT_CALIB", - .start = AB8500_INT_CC_INT_CALIB, - .end = AB8500_INT_CC_INT_CALIB, - .flags = IORESOURCE_IRQ, - }, - { - .name = "CCEOC", - .start = AB8500_INT_CCEOC, - .end = AB8500_INT_CCEOC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource ab8500_chargalg_resources[] = {}; - -#ifdef CONFIG_DEBUG_FS -static struct resource ab8500_debug_resources[] = { - { - .name = "IRQ_AB8500", - /* - * Number will be filled in. NOTE: this is deliberately - * not flagged as an IRQ in ordet to avoid remapping using - * the irqdomain in the MFD core, so that this IRQ passes - * unremapped to the debug code. - */ - }, - { - .name = "IRQ_FIRST", - .start = AB8500_INT_MAIN_EXT_CH_NOT_OK, - .end = AB8500_INT_MAIN_EXT_CH_NOT_OK, - .flags = IORESOURCE_IRQ, - }, - { - .name = "IRQ_LAST", - .start = AB8500_INT_XTAL32K_KO, - .end = AB8500_INT_XTAL32K_KO, - .flags = IORESOURCE_IRQ, - }, -}; -#endif - -static struct resource ab8500_usb_resources[] = { - { - .name = "ID_WAKEUP_R", - .start = AB8500_INT_ID_WAKEUP_R, - .end = AB8500_INT_ID_WAKEUP_R, - .flags = IORESOURCE_IRQ, - }, - { - .name = "ID_WAKEUP_F", - .start = AB8500_INT_ID_WAKEUP_F, - .end = AB8500_INT_ID_WAKEUP_F, - .flags = IORESOURCE_IRQ, - }, - { - .name = "VBUS_DET_F", - .start = AB8500_INT_VBUS_DET_F, - .end = AB8500_INT_VBUS_DET_F, - .flags = IORESOURCE_IRQ, - }, - { - .name = "VBUS_DET_R", - .start = AB8500_INT_VBUS_DET_R, - .end = AB8500_INT_VBUS_DET_R, - .flags = IORESOURCE_IRQ, - }, - { - .name = "USB_LINK_STATUS", - .start = AB8500_INT_USB_LINK_STATUS, - .end = AB8500_INT_USB_LINK_STATUS, - .flags = IORESOURCE_IRQ, - }, - { - .name = "USB_ADP_PROBE_PLUG", - .start = AB8500_INT_ADP_PROBE_PLUG, - .end = AB8500_INT_ADP_PROBE_PLUG, - .flags = IORESOURCE_IRQ, - }, - { - .name = "USB_ADP_PROBE_UNPLUG", - .start = AB8500_INT_ADP_PROBE_UNPLUG, - .end = AB8500_INT_ADP_PROBE_UNPLUG, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource ab8505_iddet_resources[] = { - { - .name = "KeyDeglitch", - .start = AB8505_INT_KEYDEGLITCH, - .end = AB8505_INT_KEYDEGLITCH, - .flags = IORESOURCE_IRQ, - }, - { - .name = "KP", - .start = AB8505_INT_KP, - .end = AB8505_INT_KP, - .flags = IORESOURCE_IRQ, - }, - { - .name = "IKP", - .start = AB8505_INT_IKP, - .end = AB8505_INT_IKP, - .flags = IORESOURCE_IRQ, - }, - { - .name = "IKR", - .start = AB8505_INT_IKR, - .end = AB8505_INT_IKR, - .flags = IORESOURCE_IRQ, - }, - { - .name = "KeyStuck", - .start = AB8505_INT_KEYSTUCK, - .end = AB8505_INT_KEYSTUCK, - .flags = IORESOURCE_IRQ, - }, - { - .name = "VBUS_DET_R", - .start = AB8500_INT_VBUS_DET_R, - .end = AB8500_INT_VBUS_DET_R, - .flags = IORESOURCE_IRQ, - }, - { - .name = "VBUS_DET_F", - .start = AB8500_INT_VBUS_DET_F, - .end = AB8500_INT_VBUS_DET_F, - .flags = IORESOURCE_IRQ, - }, - { - .name = "ID_DET_PLUGR", - .start = AB8500_INT_ID_DET_PLUGR, - .end = AB8500_INT_ID_DET_PLUGR, - .flags = IORESOURCE_IRQ, - }, - { - .name = "ID_DET_PLUGF", - .start = AB8500_INT_ID_DET_PLUGF, - .end = AB8500_INT_ID_DET_PLUGF, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource ab8500_temp_resources[] = { - { - .name = "ABX500_TEMP_WARM", - .start = AB8500_INT_TEMP_WARM, - .end = AB8500_INT_TEMP_WARM, - .flags = IORESOURCE_IRQ, - }, -}; - static const struct mfd_cell ab8500_bm_devs[] = { { .name = "ab8500-charger", .of_compatible = "stericsson,ab8500-charger", - .num_resources = ARRAY_SIZE(ab8500_charger_resources), - .resources = ab8500_charger_resources, .platform_data = &ab8500_bm_data, .pdata_size = sizeof(ab8500_bm_data), }, { .name = "ab8500-btemp", .of_compatible = "stericsson,ab8500-btemp", - .num_resources = ARRAY_SIZE(ab8500_btemp_resources), - .resources = ab8500_btemp_resources, .platform_data = &ab8500_bm_data, .pdata_size = sizeof(ab8500_bm_data), }, { .name = "ab8500-fg", .of_compatible = "stericsson,ab8500-fg", - .num_resources = ARRAY_SIZE(ab8500_fg_resources), - .resources = ab8500_fg_resources, .platform_data = &ab8500_bm_data, .pdata_size = sizeof(ab8500_bm_data), }, { .name = "ab8500-chargalg", .of_compatible = "stericsson,ab8500-chargalg", - .num_resources = ARRAY_SIZE(ab8500_chargalg_resources), - .resources = ab8500_chargalg_resources, .platform_data = &ab8500_bm_data, .pdata_size = sizeof(ab8500_bm_data), }, @@ -1055,8 +637,6 @@ static const struct mfd_cell ab8500_devs[] = { { .name = "ab8500-debug", .of_compatible = "stericsson,ab8500-debug", - .num_resources = ARRAY_SIZE(ab8500_debug_resources), - .resources = ab8500_debug_resources, }, #endif { @@ -1078,27 +658,19 @@ static const struct mfd_cell ab8500_devs[] = { { .name = "ab8500-gpadc", .of_compatible = "stericsson,ab8500-gpadc", - .num_resources = ARRAY_SIZE(ab8500_gpadc_resources), - .resources = ab8500_gpadc_resources, }, { .name = "ab8500-rtc", .of_compatible = "stericsson,ab8500-rtc", - .num_resources = ARRAY_SIZE(ab8500_rtc_resources), - .resources = ab8500_rtc_resources, }, { .name = "ab8500-acc-det", .of_compatible = "stericsson,ab8500-acc-det", - .num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources), - .resources = ab8500_av_acc_detect_resources, }, { .name = "ab8500-poweron-key", .of_compatible = "stericsson,ab8500-poweron-key", - .num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources), - .resources = ab8500_poweronkey_db_resources, }, { .name = "ab8500-pwm", @@ -1126,14 +698,10 @@ static const struct mfd_cell ab8500_devs[] = { { .name = "abx500-temp", .of_compatible = "stericsson,abx500-temp", - .num_resources = ARRAY_SIZE(ab8500_temp_resources), - .resources = ab8500_temp_resources, }, { .name = "ab8500-usb", .of_compatible = "stericsson,ab8500-usb", - .num_resources = ARRAY_SIZE(ab8500_usb_resources), - .resources = ab8500_usb_resources, }, { .name = "ab8500-codec", @@ -1145,8 +713,6 @@ static const struct mfd_cell ab9540_devs[] = { #ifdef CONFIG_DEBUG_FS { .name = "ab8500-debug", - .num_resources = ARRAY_SIZE(ab8500_debug_resources), - .resources = ab8500_debug_resources, }, #endif { @@ -1165,23 +731,15 @@ static const struct mfd_cell ab9540_devs[] = { { .name = "ab8500-gpadc", .of_compatible = "stericsson,ab8500-gpadc", - .num_resources = ARRAY_SIZE(ab8500_gpadc_resources), - .resources = ab8500_gpadc_resources, }, { .name = "ab8500-rtc", - .num_resources = ARRAY_SIZE(ab8500_rtc_resources), - .resources = ab8500_rtc_resources, }, { .name = "ab8500-acc-det", - .num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources), - .resources = ab8500_av_acc_detect_resources, }, { .name = "ab8500-poweron-key", - .num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources), - .resources = ab8500_poweronkey_db_resources, }, { .name = "ab8500-pwm", @@ -1189,8 +747,6 @@ static const struct mfd_cell ab9540_devs[] = { }, { .name = "abx500-temp", - .num_resources = ARRAY_SIZE(ab8500_temp_resources), - .resources = ab8500_temp_resources, }, { .name = "pinctrl-ab9540", @@ -1198,16 +754,12 @@ static const struct mfd_cell ab9540_devs[] = { }, { .name = "ab9540-usb", - .num_resources = ARRAY_SIZE(ab8500_usb_resources), - .resources = ab8500_usb_resources, }, { .name = "ab9540-codec", }, { .name = "ab-iddet", - .num_resources = ARRAY_SIZE(ab8505_iddet_resources), - .resources = ab8505_iddet_resources, }, }; @@ -1216,8 +768,6 @@ static const struct mfd_cell ab8505_devs[] = { #ifdef CONFIG_DEBUG_FS { .name = "ab8500-debug", - .num_resources = ARRAY_SIZE(ab8500_debug_resources), - .resources = ab8500_debug_resources, }, #endif { @@ -1233,23 +783,15 @@ static const struct mfd_cell ab8505_devs[] = { { .name = "ab8500-gpadc", .of_compatible = "stericsson,ab8500-gpadc", - .num_resources = ARRAY_SIZE(ab8505_gpadc_resources), - .resources = ab8505_gpadc_resources, }, { .name = "ab8500-rtc", - .num_resources = ARRAY_SIZE(ab8500_rtc_resources), - .resources = ab8500_rtc_resources, }, { .name = "ab8500-acc-det", - .num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources), - .resources = ab8500_av_acc_detect_resources, }, { .name = "ab8500-poweron-key", - .num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources), - .resources = ab8500_poweronkey_db_resources, }, { .name = "ab8500-pwm", @@ -1260,16 +802,12 @@ static const struct mfd_cell ab8505_devs[] = { }, { .name = "ab8500-usb", - .num_resources = ARRAY_SIZE(ab8500_usb_resources), - .resources = ab8500_usb_resources, }, { .name = "ab8500-codec", }, { .name = "ab-iddet", - .num_resources = ARRAY_SIZE(ab8505_iddet_resources), - .resources = ab8505_iddet_resources, }, }; @@ -1277,8 +815,6 @@ static const struct mfd_cell ab8540_devs[] = { #ifdef CONFIG_DEBUG_FS { .name = "ab8500-debug", - .num_resources = ARRAY_SIZE(ab8500_debug_resources), - .resources = ab8500_debug_resources, }, #endif { @@ -1297,18 +833,12 @@ static const struct mfd_cell ab8540_devs[] = { { .name = "ab8500-gpadc", .of_compatible = "stericsson,ab8500-gpadc", - .num_resources = ARRAY_SIZE(ab8505_gpadc_resources), - .resources = ab8505_gpadc_resources, }, { .name = "ab8500-acc-det", - .num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources), - .resources = ab8500_av_acc_detect_resources, }, { .name = "ab8500-poweron-key", - .num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources), - .resources = ab8500_poweronkey_db_resources, }, { .name = "ab8500-pwm", @@ -1316,24 +846,18 @@ static const struct mfd_cell ab8540_devs[] = { }, { .name = "abx500-temp", - .num_resources = ARRAY_SIZE(ab8500_temp_resources), - .resources = ab8500_temp_resources, }, { .name = "pinctrl-ab8540", }, { .name = "ab8540-usb", - .num_resources = ARRAY_SIZE(ab8500_usb_resources), - .resources = ab8500_usb_resources, }, { .name = "ab8540-codec", }, { .name = "ab-iddet", - .num_resources = ARRAY_SIZE(ab8505_iddet_resources), - .resources = ab8505_iddet_resources, }, }; @@ -1341,8 +865,6 @@ static const struct mfd_cell ab8540_cut1_devs[] = { { .name = "ab8500-rtc", .of_compatible = "stericsson,ab8500-rtc", - .num_resources = ARRAY_SIZE(ab8500_rtc_resources), - .resources = ab8500_rtc_resources, }, }; @@ -1350,8 +872,6 @@ static const struct mfd_cell ab8540_cut2_devs[] = { { .name = "ab8540-rtc", .of_compatible = "stericsson,ab8540-rtc", - .num_resources = ARRAY_SIZE(ab8540_rtc_resources), - .resources = ab8540_rtc_resources, }, }; @@ -1549,7 +1069,7 @@ static struct attribute_group ab9540_attr_group = { static int ab8500_probe(struct platform_device *pdev) { - static const char *switch_off_status[] = { + static const char * const switch_off_status[] = { "Swoff bit programming", "Thermal protection activation", "Vbat lower then BattOk falling threshold", @@ -1558,7 +1078,7 @@ static int ab8500_probe(struct platform_device *pdev) "Battery level lower than power on reset threshold", "Power on key 1 pressed longer than 10 seconds", "DB8500 thermal shutdown"}; - static const char *turn_on_status[] = { + static const char * const turn_on_status[] = { "Battery rising (Vbat)", "Power On Key 1 dbF", "Power On Key 2 dbF", @@ -1750,12 +1270,6 @@ static int ab8500_probe(struct platform_device *pdev) if (ret) return ret; -#ifdef CONFIG_DEBUG_FS - /* Pass to debugfs */ - ab8500_debug_resources[0].start = ab8500->irq; - ab8500_debug_resources[0].end = ab8500->irq; -#endif - if (is_ab9540(ab8500)) ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs, ARRAY_SIZE(ab9540_devs), NULL, diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index 0236cd7cdce4..69d9fffe5b5c 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -242,8 +242,10 @@ static struct ab8500_prcmu_ranges ab8500_debug_ranges[AB8500_NUM_BANKS] = { .first = 0x40, .last = 0x44, }, - /* 0x80-0x8B is SIM registers and should - * not be accessed from here */ + /* + * 0x80-0x8B are SIM registers and should + * not be accessed from here + */ }, }, [AB8500_USB] = { @@ -587,8 +589,10 @@ static struct ab8500_prcmu_ranges ab8505_debug_ranges[AB8500_NUM_BANKS] = { .first = 0x40, .last = 0x48, }, - /* 0x80-0x8B is SIM registers and should - * not be accessed from here */ + /* + * 0x80-0x8B are SIM registers and should + * not be accessed from here + */ }, }, [AB8500_USB] = { @@ -1306,8 +1310,10 @@ static int ab8500_registers_print(struct device *dev, u32 bank, if (s) { seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", bank, reg, value); - /* Error is not returned here since - * the output is wanted in any case */ + /* + * Error is not returned here since + * the output is wanted in any case + */ if (seq_has_overflowed(s)) return 0; } else { @@ -2740,10 +2746,9 @@ static ssize_t hwreg_common_write(char *b, struct hwreg_cfg *cfg, *cfg = loc; #ifdef ABB_HWREG_DEBUG - pr_warn("HWREG request: %s, %s,\n" - " addr=0x%08X, mask=0x%X, shift=%d" "value=0x%X\n", - (write) ? "write" : "read", - REG_FMT_DEC(cfg) ? "decimal" : "hexa", + pr_warn("HWREG request: %s, %s,\n", (write) ? "write" : "read", + REG_FMT_DEC(cfg) ? "decimal" : "hexa"); + pr_warn(" addr=0x%08X, mask=0x%X, shift=%d" "value=0x%X\n", cfg->addr, cfg->mask, cfg->shift, val); #endif diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c index c51c1b188d64..97dcadc8fa8b 100644 --- a/drivers/mfd/ab8500-gpadc.c +++ b/drivers/mfd/ab8500-gpadc.c @@ -49,61 +49,61 @@ * OTP register offsets * Bank : 0x15 */ -#define AB8500_GPADC_CAL_1 0x0F -#define AB8500_GPADC_CAL_2 0x10 -#define AB8500_GPADC_CAL_3 0x11 -#define AB8500_GPADC_CAL_4 0x12 -#define AB8500_GPADC_CAL_5 0x13 -#define AB8500_GPADC_CAL_6 0x14 -#define AB8500_GPADC_CAL_7 0x15 +#define AB8500_GPADC_CAL_1 0x0F +#define AB8500_GPADC_CAL_2 0x10 +#define AB8500_GPADC_CAL_3 0x11 +#define AB8500_GPADC_CAL_4 0x12 +#define AB8500_GPADC_CAL_5 0x13 +#define AB8500_GPADC_CAL_6 0x14 +#define AB8500_GPADC_CAL_7 0x15 /* New calibration for 8540 */ #define AB8540_GPADC_OTP4_REG_7 0x38 #define AB8540_GPADC_OTP4_REG_6 0x39 #define AB8540_GPADC_OTP4_REG_5 0x3A /* gpadc constants */ -#define EN_VINTCORE12 0x04 -#define EN_VTVOUT 0x02 -#define EN_GPADC 0x01 -#define DIS_GPADC 0x00 -#define AVG_1 0x00 -#define AVG_4 0x20 -#define AVG_8 0x40 -#define AVG_16 0x60 -#define ADC_SW_CONV 0x04 -#define EN_ICHAR 0x80 -#define BTEMP_PULL_UP 0x08 -#define EN_BUF 0x40 -#define DIS_ZERO 0x00 -#define GPADC_BUSY 0x01 -#define EN_FALLING 0x10 -#define EN_TRIG_EDGE 0x02 -#define EN_VBIAS_XTAL_TEMP 0x02 +#define EN_VINTCORE12 0x04 +#define EN_VTVOUT 0x02 +#define EN_GPADC 0x01 +#define DIS_GPADC 0x00 +#define AVG_1 0x00 +#define AVG_4 0x20 +#define AVG_8 0x40 +#define AVG_16 0x60 +#define ADC_SW_CONV 0x04 +#define EN_ICHAR 0x80 +#define BTEMP_PULL_UP 0x08 +#define EN_BUF 0x40 +#define DIS_ZERO 0x00 +#define GPADC_BUSY 0x01 +#define EN_FALLING 0x10 +#define EN_TRIG_EDGE 0x02 +#define EN_VBIAS_XTAL_TEMP 0x02 /* GPADC constants from AB8500 spec, UM0836 */ -#define ADC_RESOLUTION 1024 -#define ADC_CH_BTEMP_MIN 0 -#define ADC_CH_BTEMP_MAX 1350 -#define ADC_CH_DIETEMP_MIN 0 -#define ADC_CH_DIETEMP_MAX 1350 -#define ADC_CH_CHG_V_MIN 0 -#define ADC_CH_CHG_V_MAX 20030 -#define ADC_CH_ACCDET2_MIN 0 -#define ADC_CH_ACCDET2_MAX 2500 -#define ADC_CH_VBAT_MIN 2300 -#define ADC_CH_VBAT_MAX 4800 -#define ADC_CH_CHG_I_MIN 0 -#define ADC_CH_CHG_I_MAX 1500 -#define ADC_CH_BKBAT_MIN 0 -#define ADC_CH_BKBAT_MAX 3200 +#define ADC_RESOLUTION 1024 +#define ADC_CH_BTEMP_MIN 0 +#define ADC_CH_BTEMP_MAX 1350 +#define ADC_CH_DIETEMP_MIN 0 +#define ADC_CH_DIETEMP_MAX 1350 +#define ADC_CH_CHG_V_MIN 0 +#define ADC_CH_CHG_V_MAX 20030 +#define ADC_CH_ACCDET2_MIN 0 +#define ADC_CH_ACCDET2_MAX 2500 +#define ADC_CH_VBAT_MIN 2300 +#define ADC_CH_VBAT_MAX 4800 +#define ADC_CH_CHG_I_MIN 0 +#define ADC_CH_CHG_I_MAX 1500 +#define ADC_CH_BKBAT_MIN 0 +#define ADC_CH_BKBAT_MAX 3200 /* GPADC constants from AB8540 spec */ -#define ADC_CH_IBAT_MIN (-6000) /* mA range measured by ADC for ibat*/ -#define ADC_CH_IBAT_MAX 6000 -#define ADC_CH_IBAT_MIN_V (-60) /* mV range measured by ADC for ibat*/ -#define ADC_CH_IBAT_MAX_V 60 -#define IBAT_VDROP_L (-56) /* mV */ -#define IBAT_VDROP_H 56 +#define ADC_CH_IBAT_MIN (-6000) /* mA range measured by ADC for ibat */ +#define ADC_CH_IBAT_MAX 6000 +#define ADC_CH_IBAT_MIN_V (-60) /* mV range measured by ADC for ibat */ +#define ADC_CH_IBAT_MAX_V 60 +#define IBAT_VDROP_L (-56) /* mV */ +#define IBAT_VDROP_H 56 /* This is used to not lose precision when dividing to get gain and offset */ #define CALIB_SCALE 1000 @@ -179,7 +179,7 @@ struct ab8500_gpadc *ab8500_gpadc_get(char *name) list_for_each_entry(gpadc, &ab8500_gpadc_list, node) { if (!strcmp(name, dev_name(gpadc->dev))) - return gpadc; + return gpadc; } return ERR_PTR(-ENOENT); @@ -315,11 +315,12 @@ int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel, ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample, trig_edge, trig_timer, conv_type); -/* On failure retry a second time */ + + /* On failure retry a second time */ if (ad_value < 0) ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample, trig_edge, trig_timer, conv_type); -if (ad_value < 0) { + if (ad_value < 0) { dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n", channel); return ad_value; @@ -327,8 +328,9 @@ if (ad_value < 0) { voltage = ab8500_gpadc_ad_to_voltage(gpadc, channel, ad_value); if (voltage < 0) - dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:" - " %d AD: 0x%x\n", channel, ad_value); + dev_err(gpadc->dev, + "GPADC to voltage conversion failed ch: %d AD: 0x%x\n", + channel, ad_value); return voltage; } @@ -348,10 +350,9 @@ EXPORT_SYMBOL(ab8500_gpadc_sw_hw_convert); int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel, u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type) { - int raw_data; - raw_data = ab8500_gpadc_double_read_raw(gpadc, channel, - avg_sample, trig_edge, trig_timer, conv_type, NULL); - return raw_data; + return ab8500_gpadc_double_read_raw(gpadc, channel, avg_sample, + trig_edge, trig_timer, conv_type, + NULL); } int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel, @@ -388,7 +389,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel, goto out; if (!(val & GPADC_BUSY)) break; - msleep(10); + msleep(20); } while (++looplimit < 10); if (looplimit >= 10 && (val & GPADC_BUSY)) { dev_err(gpadc->dev, "gpadc_conversion: GPADC busy"); @@ -421,8 +422,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel, val_reg1 |= EN_TRIG_EDGE; if (trig_edge) val_reg1 |= EN_FALLING; - } - else + } else ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC, AB8500_GPADC_CTRL2_REG, val); if (ret < 0) { @@ -449,7 +449,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel, * remove when hardware will be availible */ delay_min = 1000; /* Delay in micro seconds */ - delay_max = 10000; /* large range to optimise sleep mode */ + delay_max = 10000; /* large range optimises sleepmode */ break; } /* Intentional fallthrough */ @@ -785,9 +785,10 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) << CALIB_SHIFT_IBAT) / (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V); - gpadc->cal_data[ADC_INPUT_IBAT].gain = V_gain * V2A_gain; - gpadc->cal_data[ADC_INPUT_IBAT].offset = V_offset * - V2A_gain + V2A_offset; + gpadc->cal_data[ADC_INPUT_IBAT].gain = + V_gain * V2A_gain; + gpadc->cal_data[ADC_INPUT_IBAT].offset = + V_offset * V2A_gain + V2A_offset; } else { gpadc->cal_data[ADC_INPUT_IBAT].gain = 0; } @@ -923,11 +924,10 @@ static int ab8500_gpadc_probe(struct platform_device *pdev) int ret = 0; struct ab8500_gpadc *gpadc; - gpadc = devm_kzalloc(&pdev->dev, sizeof(struct ab8500_gpadc), GFP_KERNEL); - if (!gpadc) { - dev_err(&pdev->dev, "Error: No memory\n"); + gpadc = devm_kzalloc(&pdev->dev, + sizeof(struct ab8500_gpadc), GFP_KERNEL); + if (!gpadc) return -ENOMEM; - } gpadc->irq_sw = platform_get_irq_byname(pdev, "SW_CONV_END"); if (gpadc->irq_sw < 0) @@ -1072,18 +1072,19 @@ void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc, *vmain_h = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi; *btemp_l = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo; *btemp_h = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi; - *vbat_l = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo; - *vbat_h = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi; - *ibat_l = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo; - *ibat_h = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi; - return ; + *vbat_l = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo; + *vbat_h = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi; + *ibat_l = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo; + *ibat_h = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi; } subsys_initcall_sync(ab8500_gpadc_init); module_exit(ab8500_gpadc_exit); MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson," - "M'boumba Cedric Madianga"); +MODULE_AUTHOR("Arun R Murthy"); +MODULE_AUTHOR("Daniel Willerud"); +MODULE_AUTHOR("Johan Palsson"); +MODULE_AUTHOR("M'boumba Cedric Madianga"); MODULE_ALIAS("platform:ab8500_gpadc"); MODULE_DESCRIPTION("AB8500 GPADC driver"); diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c index 0d1825696153..b9f0010309f9 100644 --- a/drivers/mfd/ab8500-sysctrl.c +++ b/drivers/mfd/ab8500-sysctrl.c @@ -27,7 +27,7 @@ static void ab8500_power_off(void) { sigset_t old; sigset_t all; - static char *pss[] = {"ab8500_ac", "pm2301", "ab8500_usb"}; + static const char * const pss[] = {"ab8500_ac", "pm2301", "ab8500_usb"}; int i; bool charger_present = false; union power_supply_propval val; @@ -68,10 +68,9 @@ static void ab8500_power_off(void) ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_TECHNOLOGY, &val); if (!ret && val.intval != POWER_SUPPLY_TECHNOLOGY_UNKNOWN) { - printk(KERN_INFO - "Charger \"%s\" is connected with known battery." - " Rebooting.\n", - pss[i]); + pr_info("Charger '%s' is connected with known battery", + pss[i]); + pr_info(" - Rebooting.\n"); machine_restart("charging"); } power_supply_put(psy); @@ -161,8 +160,8 @@ static int ab8500_sysctrl_probe(struct platform_device *pdev) pdata->initial_req_buf_config[j]); if (ret < 0) { dev_err(&pdev->dev, - "unable to set sysClkReq%dRfClkBuf: " - "%d\n", j + 1, ret); + "Can't set sysClkReq%dRfClkBuf: %d\n", + j + 1, ret); } } } diff --git a/drivers/mfd/adp5520.c b/drivers/mfd/adp5520.c index ae88654595dc..d817f202da5b 100644 --- a/drivers/mfd/adp5520.c +++ b/drivers/mfd/adp5520.c @@ -9,10 +9,10 @@ * * Derived from da903x: * Copyright (C) 2008 Compulab, Ltd. - * Mike Rapoport <mike@compulab.co.il> + * Mike Rapoport <mike@compulab.co.il> * * Copyright (C) 2006-2008 Marvell International Ltd. - * Eric Miao <eric.miao@marvell.com> + * Eric Miao <eric.miao@marvell.com> * * Licensed under the GPL-2 or later. */ @@ -355,7 +355,7 @@ static struct i2c_driver adp5520_driver = { }, .probe = adp5520_probe, .remove = adp5520_remove, - .id_table = adp5520_id, + .id_table = adp5520_id, }; module_i2c_driver(adp5520_driver); diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index d474732cc65c..5319f252790b 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -238,7 +238,7 @@ static int arizona_poll_reg(struct arizona *arizona, if ((val & mask) == target) return 0; - msleep(1); + usleep_range(1000, 5000); } dev_err(arizona->dev, "Polling reg %u timed out: %x\n", reg, val); @@ -279,14 +279,14 @@ static void arizona_disable_reset(struct arizona *arizona) case WM5110: case WM8280: /* Meet requirements for minimum reset duration */ - msleep(5); + usleep_range(5000, 10000); break; default: break; } gpio_set_value_cansleep(arizona->pdata.reset, 1); - msleep(1); + usleep_range(1000, 5000); } } @@ -598,6 +598,12 @@ static int arizona_runtime_resume(struct device *dev) goto err; } break; + case WM1831: + case CS47L24: + ret = arizona_wait_for_boot(arizona); + if (ret != 0) + goto err; + break; default: ret = arizona_wait_for_boot(arizona); if (ret != 0) @@ -682,6 +688,9 @@ static int arizona_runtime_suspend(struct device *dev) } } break; + case WM1831: + case CS47L24: + break; default: jd_active = arizona_is_jack_det_active(arizona); if (jd_active < 0) @@ -852,6 +861,16 @@ static int arizona_of_get_core_pdata(struct arizona *arizona) count++; } + count = 0; + of_property_for_each_u32(arizona->dev->of_node, "wlf,out-mono", prop, + cur, val) { + if (count == ARRAY_SIZE(pdata->out_mono)) + break; + + pdata->out_mono[count] = !!val; + count++; + } + return 0; } @@ -862,6 +881,8 @@ const struct of_device_id arizona_of_match[] = { { .compatible = "wlf,wm8997", .data = (void *)WM8997 }, { .compatible = "wlf,wm8998", .data = (void *)WM8998 }, { .compatible = "wlf,wm1814", .data = (void *)WM1814 }, + { .compatible = "wlf,wm1831", .data = (void *)WM1831 }, + { .compatible = "cirrus,cs47l24", .data = (void *)CS47L24 }, {}, }; EXPORT_SYMBOL_GPL(arizona_of_match); @@ -919,6 +940,23 @@ static const struct mfd_cell wm5110_devs[] = { }, }; +static const char * const cs47l24_supplies[] = { + "MICVDD", + "CPVDD", + "SPKVDD", +}; + +static const struct mfd_cell cs47l24_devs[] = { + { .name = "arizona-gpio" }, + { .name = "arizona-haptics" }, + { .name = "arizona-pwm" }, + { + .name = "cs47l24-codec", + .parent_supplies = cs47l24_supplies, + .num_parent_supplies = ARRAY_SIZE(cs47l24_supplies), + }, +}; + static const char * const wm8997_supplies[] = { "MICVDD", "DBVDD2", @@ -963,7 +1001,7 @@ static const struct mfd_cell wm8998_devs[] = { int arizona_dev_init(struct arizona *arizona) { struct device *dev = arizona->dev; - const char *type_name; + const char *type_name = NULL; unsigned int reg, val, mask; int (*apply_patch)(struct arizona *) = NULL; const struct mfd_cell *subdevs = NULL; @@ -987,6 +1025,8 @@ int arizona_dev_init(struct arizona *arizona) case WM8997: case WM8998: case WM1814: + case WM1831: + case CS47L24: for (i = 0; i < ARRAY_SIZE(wm5102_core_supplies); i++) arizona->core_supplies[i].supply = wm5102_core_supplies[i]; @@ -1001,11 +1041,18 @@ int arizona_dev_init(struct arizona *arizona) /* Mark DCVDD as external, LDO1 driver will clear if internal */ arizona->external_dcvdd = true; - ret = mfd_add_devices(arizona->dev, -1, early_devs, - ARRAY_SIZE(early_devs), NULL, 0, NULL); - if (ret != 0) { - dev_err(dev, "Failed to add early children: %d\n", ret); - return ret; + switch (arizona->type) { + case WM1831: + case CS47L24: + break; /* No LDO1 regulator */ + default: + ret = mfd_add_devices(arizona->dev, -1, early_devs, + ARRAY_SIZE(early_devs), NULL, 0, NULL); + if (ret != 0) { + dev_err(dev, "Failed to add early children: %d\n", ret); + return ret; + } + break; } ret = devm_regulator_bulk_get(dev, arizona->num_core_supplies, @@ -1069,6 +1116,7 @@ int arizona_dev_init(struct arizona *arizona) case 0x5102: case 0x5110: case 0x6349: + case 0x6363: case 0x8997: break; default: @@ -1084,7 +1132,7 @@ int arizona_dev_init(struct arizona *arizona) goto err_reset; } - msleep(1); + usleep_range(1000, 5000); } /* Ensure device startup is complete */ @@ -1167,6 +1215,30 @@ int arizona_dev_init(struct arizona *arizona) n_subdevs = ARRAY_SIZE(wm5110_devs); } break; + case 0x6363: + if (IS_ENABLED(CONFIG_MFD_CS47L24)) { + switch (arizona->type) { + case CS47L24: + type_name = "CS47L24"; + break; + + case WM1831: + type_name = "WM1831"; + break; + + default: + dev_warn(arizona->dev, + "CS47L24 registered as %d\n", + arizona->type); + arizona->type = CS47L24; + break; + } + + apply_patch = cs47l24_patch; + subdevs = cs47l24_devs; + n_subdevs = ARRAY_SIZE(cs47l24_devs); + } + break; case 0x8997: if (IS_ENABLED(CONFIG_MFD_WM8997)) { type_name = "WM8997"; diff --git a/drivers/mfd/arizona-i2c.c b/drivers/mfd/arizona-i2c.c index 4e3afd1861fc..5fe12961cfe5 100644 --- a/drivers/mfd/arizona-i2c.c +++ b/drivers/mfd/arizona-i2c.c @@ -88,7 +88,9 @@ static int arizona_i2c_probe(struct i2c_client *i2c, static int arizona_i2c_remove(struct i2c_client *i2c) { struct arizona *arizona = dev_get_drvdata(&i2c->dev); + arizona_dev_exit(arizona); + return 0; } diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c index 3d425e93ce84..5fef014920a3 100644 --- a/drivers/mfd/arizona-irq.c +++ b/drivers/mfd/arizona-irq.c @@ -30,11 +30,13 @@ static int arizona_map_irq(struct arizona *arizona, int irq) { int ret; - ret = regmap_irq_get_virq(arizona->aod_irq_chip, irq); - if (ret < 0) - ret = regmap_irq_get_virq(arizona->irq_chip, irq); + if (arizona->aod_irq_chip) { + ret = regmap_irq_get_virq(arizona->aod_irq_chip, irq); + if (ret >= 0) + return ret; + } - return ret; + return regmap_irq_get_virq(arizona->irq_chip, irq); } int arizona_request_irq(struct arizona *arizona, int irq, char *name, @@ -107,8 +109,8 @@ static irqreturn_t arizona_irq_thread(int irq, void *data) do { poll = false; - /* Always handle the AoD domain */ - handle_nested_irq(irq_find_mapping(arizona->virq, 0)); + if (arizona->aod_irq_chip) + handle_nested_irq(irq_find_mapping(arizona->virq, 0)); /* * Check if one of the main interrupts is asserted and only @@ -219,6 +221,15 @@ int arizona_irq_init(struct arizona *arizona) arizona->ctrlif_error = false; break; #endif +#ifdef CONFIG_MFD_CS47L24 + case WM1831: + case CS47L24: + aod = NULL; + irq = &cs47l24_irq; + + arizona->ctrlif_error = false; + break; +#endif #ifdef CONFIG_MFD_WM8997 case WM8997: aod = &wm8997_aod; @@ -291,13 +302,16 @@ int arizona_irq_init(struct arizona *arizona) goto err; } - ret = regmap_add_irq_chip(arizona->regmap, - irq_create_mapping(arizona->virq, 0), - IRQF_ONESHOT, 0, aod, - &arizona->aod_irq_chip); - if (ret != 0) { - dev_err(arizona->dev, "Failed to add AOD IRQs: %d\n", ret); - goto err_domain; + if (aod) { + ret = regmap_add_irq_chip(arizona->regmap, + irq_create_mapping(arizona->virq, 0), + IRQF_ONESHOT, 0, aod, + &arizona->aod_irq_chip); + if (ret != 0) { + dev_err(arizona->dev, + "Failed to add AOD IRQs: %d\n", ret); + goto err; + } } ret = regmap_add_irq_chip(arizona->regmap, @@ -309,30 +323,6 @@ int arizona_irq_init(struct arizona *arizona) goto err_aod; } - /* Make sure the boot done IRQ is unmasked for resumes */ - i = arizona_map_irq(arizona, ARIZONA_IRQ_BOOT_DONE); - ret = request_threaded_irq(i, NULL, arizona_boot_done, IRQF_ONESHOT, - "Boot done", arizona); - if (ret != 0) { - dev_err(arizona->dev, "Failed to request boot done %d: %d\n", - arizona->irq, ret); - goto err_boot_done; - } - - /* Handle control interface errors in the core */ - if (arizona->ctrlif_error) { - i = arizona_map_irq(arizona, ARIZONA_IRQ_CTRLIF_ERR); - ret = request_threaded_irq(i, NULL, arizona_ctrlif_err, - IRQF_ONESHOT, - "Control interface error", arizona); - if (ret != 0) { - dev_err(arizona->dev, - "Failed to request CTRLIF_ERR %d: %d\n", - arizona->irq, ret); - goto err_ctrlif; - } - } - /* Used to emulate edge trigger and to work around broken pinmux */ if (arizona->pdata.irq_gpio) { if (gpio_to_irq(arizona->pdata.irq_gpio) != arizona->irq) { @@ -362,21 +352,42 @@ int arizona_irq_init(struct arizona *arizona) goto err_main_irq; } + /* Make sure the boot done IRQ is unmasked for resumes */ + i = arizona_map_irq(arizona, ARIZONA_IRQ_BOOT_DONE); + ret = request_threaded_irq(i, NULL, arizona_boot_done, IRQF_ONESHOT, + "Boot done", arizona); + if (ret != 0) { + dev_err(arizona->dev, "Failed to request boot done %d: %d\n", + arizona->irq, ret); + goto err_boot_done; + } + + /* Handle control interface errors in the core */ + if (arizona->ctrlif_error) { + i = arizona_map_irq(arizona, ARIZONA_IRQ_CTRLIF_ERR); + ret = request_threaded_irq(i, NULL, arizona_ctrlif_err, + IRQF_ONESHOT, + "Control interface error", arizona); + if (ret != 0) { + dev_err(arizona->dev, + "Failed to request CTRLIF_ERR %d: %d\n", + arizona->irq, ret); + goto err_ctrlif; + } + } + return 0; -err_main_irq: - if (arizona->ctrlif_error) - free_irq(arizona_map_irq(arizona, ARIZONA_IRQ_CTRLIF_ERR), - arizona); err_ctrlif: free_irq(arizona_map_irq(arizona, ARIZONA_IRQ_BOOT_DONE), arizona); err_boot_done: + free_irq(arizona->irq, arizona); +err_main_irq: regmap_del_irq_chip(irq_create_mapping(arizona->virq, 1), arizona->irq_chip); err_aod: regmap_del_irq_chip(irq_create_mapping(arizona->virq, 0), arizona->aod_irq_chip); -err_domain: err: return ret; } diff --git a/drivers/mfd/arizona-spi.c b/drivers/mfd/arizona-spi.c index befbc89bfd34..5c1ccdeb9b70 100644 --- a/drivers/mfd/arizona-spi.c +++ b/drivers/mfd/arizona-spi.c @@ -46,6 +46,11 @@ static int arizona_spi_probe(struct spi_device *spi) if (IS_ENABLED(CONFIG_MFD_WM5110)) regmap_config = &wm5110_spi_regmap; break; + case WM1831: + case CS47L24: + if (IS_ENABLED(CONFIG_MFD_CS47L24)) + regmap_config = &cs47l24_spi_regmap; + break; default: dev_err(&spi->dev, "Unknown device type %ld\n", type); return -EINVAL; @@ -89,6 +94,8 @@ static const struct spi_device_id arizona_spi_ids[] = { { "wm5102", WM5102 }, { "wm5110", WM5110 }, { "wm8280", WM8280 }, + { "wm1831", WM1831 }, + { "cs47l24", CS47L24 }, { }, }; MODULE_DEVICE_TABLE(spi, arizona_spi_ids); diff --git a/drivers/mfd/arizona.h b/drivers/mfd/arizona.h index 3af12e938f57..198e9cea77f9 100644 --- a/drivers/mfd/arizona.h +++ b/drivers/mfd/arizona.h @@ -25,6 +25,8 @@ extern const struct regmap_config wm5102_spi_regmap; extern const struct regmap_config wm5110_i2c_regmap; extern const struct regmap_config wm5110_spi_regmap; +extern const struct regmap_config cs47l24_spi_regmap; + extern const struct regmap_config wm8997_i2c_regmap; extern const struct regmap_config wm8998_i2c_regmap; @@ -40,6 +42,8 @@ extern const struct regmap_irq_chip wm5110_aod; extern const struct regmap_irq_chip wm5110_irq; extern const struct regmap_irq_chip wm5110_revd_irq; +extern const struct regmap_irq_chip cs47l24_irq; + extern const struct regmap_irq_chip wm8997_aod; extern const struct regmap_irq_chip wm8997_irq; diff --git a/drivers/mfd/as3711.c b/drivers/mfd/as3711.c index d001f7e238f5..94d67a6e1eb7 100644 --- a/drivers/mfd/as3711.c +++ b/drivers/mfd/as3711.c @@ -136,17 +136,13 @@ static int as3711_i2c_probe(struct i2c_client *client, } else { pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) { - dev_err(&client->dev, "Failed to allocate pdata\n"); + if (!pdata) return -ENOMEM; - } } as3711 = devm_kzalloc(&client->dev, sizeof(struct as3711), GFP_KERNEL); - if (!as3711) { - dev_err(&client->dev, "Memory allocation failed\n"); + if (!as3711) return -ENOMEM; - } as3711->dev = &client->dev; i2c_set_clientdata(client, as3711); @@ -157,7 +153,8 @@ static int as3711_i2c_probe(struct i2c_client *client, as3711->regmap = devm_regmap_init_i2c(client, &as3711_regmap_config); if (IS_ERR(as3711->regmap)) { ret = PTR_ERR(as3711->regmap); - dev_err(&client->dev, "regmap initialization failed: %d\n", ret); + dev_err(&client->dev, + "regmap initialization failed: %d\n", ret); return ret; } @@ -172,12 +169,19 @@ static int as3711_i2c_probe(struct i2c_client *client, return -ENODEV; dev_info(as3711->dev, "AS3711 detected: %x:%x\n", id1, id2); - /* We can reuse as3711_subdevs[], it will be copied in mfd_add_devices() */ + /* + * We can reuse as3711_subdevs[], + * it will be copied in mfd_add_devices() + */ if (pdata) { - as3711_subdevs[AS3711_REGULATOR].platform_data = &pdata->regulator; - as3711_subdevs[AS3711_REGULATOR].pdata_size = sizeof(pdata->regulator); - as3711_subdevs[AS3711_BACKLIGHT].platform_data = &pdata->backlight; - as3711_subdevs[AS3711_BACKLIGHT].pdata_size = sizeof(pdata->backlight); + as3711_subdevs[AS3711_REGULATOR].platform_data = + &pdata->regulator; + as3711_subdevs[AS3711_REGULATOR].pdata_size = + sizeof(pdata->regulator); + as3711_subdevs[AS3711_BACKLIGHT].platform_data = + &pdata->backlight; + as3711_subdevs[AS3711_BACKLIGHT].pdata_size = + sizeof(pdata->backlight); } else { as3711_subdevs[AS3711_REGULATOR].platform_data = NULL; as3711_subdevs[AS3711_REGULATOR].pdata_size = 0; diff --git a/drivers/mfd/as3722.c b/drivers/mfd/as3722.c index 924ea90494ae..e1f597f97f86 100644 --- a/drivers/mfd/as3722.c +++ b/drivers/mfd/as3722.c @@ -405,6 +405,8 @@ static int as3722_i2c_probe(struct i2c_client *i2c, goto scrub; } + device_init_wakeup(as3722->dev, true); + dev_dbg(as3722->dev, "AS3722 core driver initialized successfully\n"); return 0; @@ -422,6 +424,29 @@ static int as3722_i2c_remove(struct i2c_client *i2c) return 0; } +static int __maybe_unused as3722_i2c_suspend(struct device *dev) +{ + struct as3722 *as3722 = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + enable_irq_wake(as3722->chip_irq); + disable_irq(as3722->chip_irq); + + return 0; +} + +static int __maybe_unused as3722_i2c_resume(struct device *dev) +{ + struct as3722 *as3722 = dev_get_drvdata(dev); + + enable_irq(as3722->chip_irq); + + if (device_may_wakeup(dev)) + disable_irq_wake(as3722->chip_irq); + + return 0; +} + static const struct of_device_id as3722_of_match[] = { { .compatible = "ams,as3722", }, {}, @@ -434,10 +459,15 @@ static const struct i2c_device_id as3722_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, as3722_i2c_id); +static const struct dev_pm_ops as3722_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(as3722_i2c_suspend, as3722_i2c_resume) +}; + static struct i2c_driver as3722_i2c_driver = { .driver = { .name = "as3722", .of_match_table = as3722_of_match, + .pm = &as3722_pm_ops, }, .probe = as3722_i2c_probe, .remove = as3722_i2c_remove, diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index a726f01e3b02..4dca6bc61f5b 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -167,7 +167,6 @@ static void asic3_irq_demux(struct irq_desc *desc) base = ASIC3_GPIO_A_BASE + bank * ASIC3_GPIO_BASE_INCR; - spin_lock_irqsave(&asic->lock, flags); istat = asic3_read_register(asic, base + @@ -502,7 +501,8 @@ static int asic3_gpio_get(struct gpio_chip *chip, return -EINVAL; } - return asic3_read_register(asic, gpio_base + ASIC3_GPIO_STATUS) & mask; + return !!(asic3_read_register(asic, + gpio_base + ASIC3_GPIO_STATUS) & mask); } static void asic3_gpio_set(struct gpio_chip *chip, @@ -536,8 +536,6 @@ static void asic3_gpio_set(struct gpio_chip *chip, asic3_write_register(asic, gpio_base + ASIC3_GPIO_OUT, out_reg); spin_unlock_irqrestore(&asic->lock, flags); - - return; } static int asic3_gpio_to_irq(struct gpio_chip *chip, unsigned offset) @@ -665,18 +663,18 @@ static int ds1wm_enable(struct platform_device *pdev) asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX0]); asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX1]); asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_OWM]); - msleep(1); + usleep_range(1000, 5000); /* Reset and enable DS1WM */ asic3_set_register(asic, ASIC3_OFFSET(EXTCF, RESET), ASIC3_EXTCF_OWM_RESET, 1); - msleep(1); + usleep_range(1000, 5000); asic3_set_register(asic, ASIC3_OFFSET(EXTCF, RESET), ASIC3_EXTCF_OWM_RESET, 0); - msleep(1); + usleep_range(1000, 5000); asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT), ASIC3_EXTCF_OWM_EN, 1); - msleep(1); + usleep_range(1000, 5000); return 0; } @@ -757,7 +755,7 @@ static int asic3_mmc_enable(struct platform_device *pdev) * when HCLK is stopped. */ asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX1]); - msleep(1); + usleep_range(1000, 5000); /* HCLK 24.576 MHz, BCLK 12.288 MHz: */ asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), @@ -765,7 +763,7 @@ static int asic3_mmc_enable(struct platform_device *pdev) asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_SD_HOST]); asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_SD_BUS]); - msleep(1); + usleep_range(1000, 5000); asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT), ASIC3_EXTCF_SD_MEM_ENABLE, 1); @@ -841,7 +839,7 @@ static int asic3_leds_suspend(struct platform_device *pdev) struct asic3 *asic = dev_get_drvdata(pdev->dev.parent); while (asic3_gpio_get(&asic->gpio, ASIC3_GPIO(C, cell->id)) != 0) - msleep(1); + usleep_range(1000, 5000); asic3_clk_disable(asic, &asic->clocks[clock_ledn[cell->id]]); @@ -900,8 +898,8 @@ static int __init asic3_mfd_probe(struct platform_device *pdev, /* MMC */ if (mem_sdio) { - asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >> asic->bus_shift) + - mem_sdio->start, + asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >> + asic->bus_shift) + mem_sdio->start, ASIC3_SD_CONFIG_SIZE >> asic->bus_shift); if (!asic->tmio_cnf) { ret = -ENOMEM; @@ -962,10 +960,8 @@ static int __init asic3_probe(struct platform_device *pdev) asic = devm_kzalloc(&pdev->dev, sizeof(struct asic3), GFP_KERNEL); - if (asic == NULL) { - printk(KERN_ERR "kzalloc failed\n"); + if (!asic) return -ENOMEM; - } spin_lock_init(&asic->lock); platform_set_drvdata(pdev, asic); @@ -1074,7 +1070,9 @@ static struct platform_driver asic3_device_driver = { static int __init asic3_init(void) { int retval = 0; + retval = platform_driver_probe(&asic3_device_driver, asic3_probe); + return retval; } diff --git a/drivers/mfd/cros_ec_i2c.c b/drivers/mfd/cros_ec_i2c.c index 56a466469664..9f70de1e4c70 100644 --- a/drivers/mfd/cros_ec_i2c.c +++ b/drivers/mfd/cros_ec_i2c.c @@ -292,7 +292,7 @@ static int cros_ec_i2c_probe(struct i2c_client *client, struct cros_ec_device *ec_dev = NULL; int err; - ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL); + ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL); if (!ec_dev) return -ENOMEM; diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c index 6a0f6ec67c6b..ebe9b9477cb2 100644 --- a/drivers/mfd/cros_ec_spi.c +++ b/drivers/mfd/cros_ec_spi.c @@ -113,7 +113,7 @@ static int terminate_request(struct cros_ec_device *ec_dev) trans.delay_usecs = ec_spi->end_of_msg_delay; spi_message_add_tail(&trans, &msg); - ret = spi_sync(ec_spi->spi, &msg); + ret = spi_sync_locked(ec_spi->spi, &msg); /* Reset end-of-response timer */ ec_spi->last_transfer_ns = ktime_get_ns(); @@ -147,7 +147,7 @@ static int receive_n_bytes(struct cros_ec_device *ec_dev, u8 *buf, int n) spi_message_init(&msg); spi_message_add_tail(&trans, &msg); - ret = spi_sync(ec_spi->spi, &msg); + ret = spi_sync_locked(ec_spi->spi, &msg); if (ret < 0) dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret); @@ -175,7 +175,7 @@ static int cros_ec_spi_receive_packet(struct cros_ec_device *ec_dev, unsigned long deadline; int todo; - BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size); + BUG_ON(ec_dev->din_size < EC_MSG_PREAMBLE_COUNT); /* Receive data until we see the header byte */ deadline = jiffies + msecs_to_jiffies(EC_MSG_DEADLINE_MS); @@ -283,7 +283,7 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev, unsigned long deadline; int todo; - BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size); + BUG_ON(ec_dev->din_size < EC_MSG_PREAMBLE_COUNT); /* Receive data until we see the header byte */ deadline = jiffies + msecs_to_jiffies(EC_MSG_DEADLINE_MS); @@ -391,10 +391,10 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev, } rx_buf = kzalloc(len, GFP_KERNEL); - if (!rx_buf) { - ret = -ENOMEM; - goto exit; - } + if (!rx_buf) + return -ENOMEM; + + spi_bus_lock(ec_spi->spi->master); /* * Leave a gap between CS assertion and clocking of data to allow the @@ -414,7 +414,7 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev, trans.len = len; trans.cs_change = 1; spi_message_add_tail(&trans, &msg); - ret = spi_sync(ec_spi->spi, &msg); + ret = spi_sync_locked(ec_spi->spi, &msg); /* Get the response */ if (!ret) { @@ -440,6 +440,9 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev, } final_ret = terminate_request(ec_dev); + + spi_bus_unlock(ec_spi->spi->master); + if (!ret) ret = final_ret; if (ret < 0) @@ -520,10 +523,10 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev, } rx_buf = kzalloc(len, GFP_KERNEL); - if (!rx_buf) { - ret = -ENOMEM; - goto exit; - } + if (!rx_buf) + return -ENOMEM; + + spi_bus_lock(ec_spi->spi->master); /* Transmit phase - send our message */ debug_packet(ec_dev->dev, "out", ec_dev->dout, len); @@ -534,7 +537,7 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev, trans.cs_change = 1; spi_message_init(&msg); spi_message_add_tail(&trans, &msg); - ret = spi_sync(ec_spi->spi, &msg); + ret = spi_sync_locked(ec_spi->spi, &msg); /* Get the response */ if (!ret) { @@ -560,6 +563,9 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev, } final_ret = terminate_request(ec_dev); + + spi_bus_unlock(ec_spi->spi->master); + if (!ret) ret = final_ret; if (ret < 0) diff --git a/drivers/mfd/cs47l24-tables.c b/drivers/mfd/cs47l24-tables.c new file mode 100644 index 000000000000..870800657594 --- /dev/null +++ b/drivers/mfd/cs47l24-tables.c @@ -0,0 +1,1629 @@ +/* + * Data tables for CS47L24 codec + * + * Copyright 2015 Cirrus Logic, Inc. + * + * Author: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> + +#include <linux/mfd/arizona/core.h> +#include <linux/mfd/arizona/registers.h> +#include <linux/device.h> + +#include "arizona.h" + +#define CS47L24_NUM_ISR 5 + +static const struct reg_sequence cs47l24_reva_patch[] = { + { 0x80, 0x3 }, + { 0x27C, 0x0010 }, + { 0x221, 0x0070 }, + { 0x80, 0x0 }, +}; + +int cs47l24_patch(struct arizona *arizona) +{ + return regmap_register_patch(arizona->regmap, + cs47l24_reva_patch, + ARRAY_SIZE(cs47l24_reva_patch)); +} +EXPORT_SYMBOL_GPL(cs47l24_patch); + +static const struct regmap_irq cs47l24_irqs[ARIZONA_NUM_IRQ] = { + [ARIZONA_IRQ_GP2] = { .reg_offset = 0, .mask = ARIZONA_GP2_EINT1 }, + [ARIZONA_IRQ_GP1] = { .reg_offset = 0, .mask = ARIZONA_GP1_EINT1 }, + + [ARIZONA_IRQ_DSP3_RAM_RDY] = { + .reg_offset = 1, .mask = ARIZONA_DSP3_RAM_RDY_EINT1 + }, + [ARIZONA_IRQ_DSP2_RAM_RDY] = { + .reg_offset = 1, .mask = ARIZONA_DSP2_RAM_RDY_EINT1 + }, + [ARIZONA_IRQ_DSP_IRQ8] = { + .reg_offset = 1, .mask = ARIZONA_DSP_IRQ8_EINT1 + }, + [ARIZONA_IRQ_DSP_IRQ7] = { + .reg_offset = 1, .mask = ARIZONA_DSP_IRQ7_EINT1 + }, + [ARIZONA_IRQ_DSP_IRQ6] = { + .reg_offset = 1, .mask = ARIZONA_DSP_IRQ6_EINT1 + }, + [ARIZONA_IRQ_DSP_IRQ5] = { + .reg_offset = 1, .mask = ARIZONA_DSP_IRQ5_EINT1 + }, + [ARIZONA_IRQ_DSP_IRQ4] = { + .reg_offset = 1, .mask = ARIZONA_DSP_IRQ4_EINT1 + }, + [ARIZONA_IRQ_DSP_IRQ3] = { + .reg_offset = 1, .mask = ARIZONA_DSP_IRQ3_EINT1 + }, + [ARIZONA_IRQ_DSP_IRQ2] = { + .reg_offset = 1, .mask = ARIZONA_DSP_IRQ2_EINT1 + }, + [ARIZONA_IRQ_DSP_IRQ1] = { + .reg_offset = 1, .mask = ARIZONA_DSP_IRQ1_EINT1 + }, + + [ARIZONA_IRQ_SPK_OVERHEAT_WARN] = { + .reg_offset = 2, .mask = ARIZONA_SPK_OVERHEAT_WARN_EINT1 + }, + [ARIZONA_IRQ_SPK_OVERHEAT] = { + .reg_offset = 2, .mask = ARIZONA_SPK_OVERHEAT_EINT1 + }, + [ARIZONA_IRQ_WSEQ_DONE] = { + .reg_offset = 2, .mask = ARIZONA_WSEQ_DONE_EINT1 + }, + [ARIZONA_IRQ_DRC2_SIG_DET] = { + .reg_offset = 2, .mask = ARIZONA_DRC2_SIG_DET_EINT1 + }, + [ARIZONA_IRQ_DRC1_SIG_DET] = { + .reg_offset = 2, .mask = ARIZONA_DRC1_SIG_DET_EINT1 + }, + [ARIZONA_IRQ_ASRC2_LOCK] = { + .reg_offset = 2, .mask = ARIZONA_ASRC2_LOCK_EINT1 + }, + [ARIZONA_IRQ_ASRC1_LOCK] = { + .reg_offset = 2, .mask = ARIZONA_ASRC1_LOCK_EINT1 + }, + [ARIZONA_IRQ_UNDERCLOCKED] = { + .reg_offset = 2, .mask = ARIZONA_UNDERCLOCKED_EINT1 + }, + [ARIZONA_IRQ_OVERCLOCKED] = { + .reg_offset = 2, .mask = ARIZONA_OVERCLOCKED_EINT1 + }, + [ARIZONA_IRQ_FLL2_LOCK] = { + .reg_offset = 2, .mask = ARIZONA_FLL2_LOCK_EINT1 + }, + [ARIZONA_IRQ_FLL1_LOCK] = { + .reg_offset = 2, .mask = ARIZONA_FLL1_LOCK_EINT1 + }, + [ARIZONA_IRQ_CLKGEN_ERR] = { + .reg_offset = 2, .mask = ARIZONA_CLKGEN_ERR_EINT1 + }, + [ARIZONA_IRQ_CLKGEN_ERR_ASYNC] = { + .reg_offset = 2, .mask = ARIZONA_CLKGEN_ERR_ASYNC_EINT1 + }, + + [ARIZONA_IRQ_CTRLIF_ERR] = { + .reg_offset = 3, .mask = ARIZONA_V2_CTRLIF_ERR_EINT1 + }, + [ARIZONA_IRQ_MIXER_DROPPED_SAMPLES] = { + .reg_offset = 3, .mask = ARIZONA_V2_MIXER_DROPPED_SAMPLE_EINT1 + }, + [ARIZONA_IRQ_ASYNC_CLK_ENA_LOW] = { + .reg_offset = 3, .mask = ARIZONA_V2_ASYNC_CLK_ENA_LOW_EINT1 + }, + [ARIZONA_IRQ_SYSCLK_ENA_LOW] = { + .reg_offset = 3, .mask = ARIZONA_V2_SYSCLK_ENA_LOW_EINT1 + }, + [ARIZONA_IRQ_ISRC1_CFG_ERR] = { + .reg_offset = 3, .mask = ARIZONA_V2_ISRC1_CFG_ERR_EINT1 + }, + [ARIZONA_IRQ_ISRC2_CFG_ERR] = { + .reg_offset = 3, .mask = ARIZONA_V2_ISRC2_CFG_ERR_EINT1 + }, + [ARIZONA_IRQ_ISRC3_CFG_ERR] = { + .reg_offset = 3, .mask = ARIZONA_V2_ISRC3_CFG_ERR_EINT1 + }, + [ARIZONA_IRQ_HP1R_DONE] = { + .reg_offset = 3, .mask = ARIZONA_HP1R_DONE_EINT1 + }, + [ARIZONA_IRQ_HP1L_DONE] = { + .reg_offset = 3, .mask = ARIZONA_HP1L_DONE_EINT1 + }, + + [ARIZONA_IRQ_BOOT_DONE] = { + .reg_offset = 4, .mask = ARIZONA_BOOT_DONE_EINT1 + }, + [ARIZONA_IRQ_ASRC_CFG_ERR] = { + .reg_offset = 4, .mask = ARIZONA_V2_ASRC_CFG_ERR_EINT1 + }, + [ARIZONA_IRQ_FLL2_CLOCK_OK] = { + .reg_offset = 4, .mask = ARIZONA_FLL2_CLOCK_OK_EINT1 + }, + [ARIZONA_IRQ_FLL1_CLOCK_OK] = { + .reg_offset = 4, .mask = ARIZONA_FLL1_CLOCK_OK_EINT1 + }, + + [ARIZONA_IRQ_DSP_SHARED_WR_COLL] = { + .reg_offset = 5, .mask = ARIZONA_DSP_SHARED_WR_COLL_EINT1 + }, + [ARIZONA_IRQ_SPK_SHUTDOWN] = { + .reg_offset = 5, .mask = ARIZONA_SPK_SHUTDOWN_EINT1 + }, + [ARIZONA_IRQ_SPK1R_SHORT] = { + .reg_offset = 5, .mask = ARIZONA_SPK1R_SHORT_EINT1 + }, + [ARIZONA_IRQ_SPK1L_SHORT] = { + .reg_offset = 5, .mask = ARIZONA_SPK1L_SHORT_EINT1 + }, + [ARIZONA_IRQ_HP1R_SC_POS] = { + .reg_offset = 5, .mask = ARIZONA_HP1R_SC_POS_EINT1 + }, + [ARIZONA_IRQ_HP1L_SC_POS] = { + .reg_offset = 5, .mask = ARIZONA_HP1L_SC_POS_EINT1 + }, +}; + +const struct regmap_irq_chip cs47l24_irq = { + .name = "cs47l24 IRQ", + .status_base = ARIZONA_INTERRUPT_STATUS_1, + .mask_base = ARIZONA_INTERRUPT_STATUS_1_MASK, + .ack_base = ARIZONA_INTERRUPT_STATUS_1, + .num_regs = 6, + .irqs = cs47l24_irqs, + .num_irqs = ARRAY_SIZE(cs47l24_irqs), +}; +EXPORT_SYMBOL_GPL(cs47l24_irq); + +static const struct reg_default cs47l24_reg_default[] = { + { 0x00000008, 0x0019 }, /* R8 - Ctrl IF SPI CFG 1 */ + { 0x00000020, 0x0000 }, /* R32 - Tone Generator 1 */ + { 0x00000021, 0x1000 }, /* R33 - Tone Generator 2 */ + { 0x00000022, 0x0000 }, /* R34 - Tone Generator 3 */ + { 0x00000023, 0x1000 }, /* R35 - Tone Generator 4 */ + { 0x00000024, 0x0000 }, /* R36 - Tone Generator 5 */ + { 0x00000030, 0x0000 }, /* R48 - PWM Drive 1 */ + { 0x00000031, 0x0100 }, /* R49 - PWM Drive 2 */ + { 0x00000032, 0x0100 }, /* R50 - PWM Drive 3 */ + { 0x00000041, 0x0000 }, /* R65 - Sequence control */ + { 0x00000061, 0x01FF }, /* R97 - Sample Rate Sequence Select 1 */ + { 0x00000062, 0x01FF }, /* R98 - Sample Rate Sequence Select 2 */ + { 0x00000063, 0x01FF }, /* R99 - Sample Rate Sequence Select 3 */ + { 0x00000064, 0x01FF }, /* R100 - Sample Rate Sequence Select 4 */ + { 0x00000070, 0x0000 }, /* R112 - Comfort Noise Generator */ + { 0x00000090, 0x0000 }, /* R144 - Haptics Control 1 */ + { 0x00000091, 0x7FFF }, /* R145 - Haptics Control 2 */ + { 0x00000092, 0x0000 }, /* R146 - Haptics phase 1 intensity */ + { 0x00000093, 0x0000 }, /* R147 - Haptics phase 1 duration */ + { 0x00000094, 0x0000 }, /* R148 - Haptics phase 2 intensity */ + { 0x00000095, 0x0000 }, /* R149 - Haptics phase 2 duration */ + { 0x00000096, 0x0000 }, /* R150 - Haptics phase 3 intensity */ + { 0x00000097, 0x0000 }, /* R151 - Haptics phase 3 duration */ + { 0x00000100, 0x0002 }, /* R256 - Clock 32k 1 */ + { 0x00000101, 0x0504 }, /* R257 - System Clock 1 */ + { 0x00000102, 0x0011 }, /* R258 - Sample rate 1 */ + { 0x00000103, 0x0011 }, /* R259 - Sample rate 2 */ + { 0x00000104, 0x0011 }, /* R260 - Sample rate 3 */ + { 0x00000112, 0x0305 }, /* R274 - Async clock 1 */ + { 0x00000113, 0x0011 }, /* R275 - Async sample rate 1 */ + { 0x00000114, 0x0011 }, /* R276 - Async sample rate 2 */ + { 0x00000149, 0x0000 }, /* R329 - Output system clock */ + { 0x0000014A, 0x0000 }, /* R330 - Output async clock */ + { 0x00000152, 0x0000 }, /* R338 - Rate Estimator 1 */ + { 0x00000153, 0x0000 }, /* R339 - Rate Estimator 2 */ + { 0x00000154, 0x0000 }, /* R340 - Rate Estimator 3 */ + { 0x00000155, 0x0000 }, /* R341 - Rate Estimator 4 */ + { 0x00000156, 0x0000 }, /* R342 - Rate Estimator 5 */ + { 0x00000171, 0x0002 }, /* R369 - FLL1 Control 1 */ + { 0x00000172, 0x0008 }, /* R370 - FLL1 Control 2 */ + { 0x00000173, 0x0018 }, /* R371 - FLL1 Control 3 */ + { 0x00000174, 0x007D }, /* R372 - FLL1 Control 4 */ + { 0x00000175, 0x0006 }, /* R373 - FLL1 Control 5 */ + { 0x00000176, 0x0000 }, /* R374 - FLL1 Control 6 */ + { 0x00000177, 0x0281 }, /* R375 - FLL1 Loop Filter Test 1 */ + { 0x00000178, 0x0000 }, /* R376 - FLL1 NCO Test 0 */ + { 0x00000179, 0x0000 }, /* R376 - FLL1 Control 7 */ + { 0x00000181, 0x0000 }, /* R385 - FLL1 Synchroniser 1 */ + { 0x00000182, 0x0000 }, /* R386 - FLL1 Synchroniser 2 */ + { 0x00000183, 0x0000 }, /* R387 - FLL1 Synchroniser 3 */ + { 0x00000184, 0x0000 }, /* R388 - FLL1 Synchroniser 4 */ + { 0x00000185, 0x0000 }, /* R389 - FLL1 Synchroniser 5 */ + { 0x00000186, 0x0000 }, /* R390 - FLL1 Synchroniser 6 */ + { 0x00000187, 0x0001 }, /* R390 - FLL1 Synchroniser 7 */ + { 0x00000189, 0x0000 }, /* R393 - FLL1 Spread Spectrum */ + { 0x0000018A, 0x000C }, /* R394 - FLL1 GPIO Clock */ + { 0x00000191, 0x0002 }, /* R401 - FLL2 Control 1 */ + { 0x00000192, 0x0008 }, /* R402 - FLL2 Control 2 */ + { 0x00000193, 0x0018 }, /* R403 - FLL2 Control 3 */ + { 0x00000194, 0x007D }, /* R404 - FLL2 Control 4 */ + { 0x00000195, 0x000C }, /* R405 - FLL2 Control 5 */ + { 0x00000196, 0x0000 }, /* R406 - FLL2 Control 6 */ + { 0x00000197, 0x0000 }, /* R407 - FLL2 Loop Filter Test 1 */ + { 0x00000198, 0x0000 }, /* R408 - FLL2 NCO Test 0 */ + { 0x00000199, 0x0000 }, /* R408 - FLL2 Control 7 */ + { 0x000001A1, 0x0000 }, /* R417 - FLL2 Synchroniser 1 */ + { 0x000001A2, 0x0000 }, /* R418 - FLL2 Synchroniser 2 */ + { 0x000001A3, 0x0000 }, /* R419 - FLL2 Synchroniser 3 */ + { 0x000001A4, 0x0000 }, /* R420 - FLL2 Synchroniser 4 */ + { 0x000001A5, 0x0000 }, /* R421 - FLL2 Synchroniser 5 */ + { 0x000001A6, 0x0000 }, /* R422 - FLL2 Synchroniser 6 */ + { 0x000001A7, 0x0001 }, /* R422 - FLL2 Synchroniser 7 */ + { 0x000001A9, 0x0000 }, /* R425 - FLL2 Spread Spectrum */ + { 0x000001AA, 0x000C }, /* R426 - FLL2 GPIO Clock */ + { 0x00000218, 0x00E6 }, /* R536 - Mic Bias Ctrl 1 */ + { 0x00000219, 0x00E6 }, /* R537 - Mic Bias Ctrl 2 */ + { 0x00000300, 0x0000 }, /* R768 - Input Enables */ + { 0x00000308, 0x0000 }, /* R776 - Input Rate */ + { 0x00000309, 0x0022 }, /* R777 - Input Volume Ramp */ + { 0x0000030C, 0x0002 }, /* R780 - HPF Control */ + { 0x00000310, 0x2000 }, /* R784 - IN1L Control */ + { 0x00000311, 0x0180 }, /* R785 - ADC Digital Volume 1L */ + { 0x00000312, 0x0000 }, /* R786 - DMIC1L Control */ + { 0x00000314, 0x0000 }, /* R788 - IN1R Control */ + { 0x00000315, 0x0180 }, /* R789 - ADC Digital Volume 1R */ + { 0x00000316, 0x0000 }, /* R790 - DMIC1R Control */ + { 0x00000318, 0x2000 }, /* R792 - IN2L Control */ + { 0x00000319, 0x0180 }, /* R793 - ADC Digital Volume 2L */ + { 0x0000031A, 0x0000 }, /* R794 - DMIC2L Control */ + { 0x0000031C, 0x0000 }, /* R796 - IN2R Control */ + { 0x0000031D, 0x0180 }, /* R797 - ADC Digital Volume 2R */ + { 0x0000031E, 0x0000 }, /* R798 - DMIC2R Control */ + { 0x00000400, 0x0000 }, /* R1024 - Output Enables 1 */ + { 0x00000408, 0x0000 }, /* R1032 - Output Rate 1 */ + { 0x00000409, 0x0022 }, /* R1033 - Output Volume Ramp */ + { 0x00000410, 0x0080 }, /* R1040 - Output Path Config 1L */ + { 0x00000411, 0x0180 }, /* R1041 - DAC Digital Volume 1L */ + { 0x00000412, 0x0081 }, /* R1042 - DAC Volume Limit 1L */ + { 0x00000413, 0x0001 }, /* R1043 - Noise Gate Select 1L */ + { 0x00000415, 0x0180 }, /* R1045 - DAC Digital Volume 1R */ + { 0x00000416, 0x0081 }, /* R1046 - DAC Volume Limit 1R */ + { 0x00000417, 0x0002 }, /* R1047 - Noise Gate Select 1R */ + { 0x00000429, 0x0180 }, /* R1065 - DAC Digital Volume 4L */ + { 0x0000042A, 0x0081 }, /* R1066 - Out Volume 4L */ + { 0x0000042B, 0x0040 }, /* R1067 - Noise Gate Select 4L */ + { 0x00000450, 0x0000 }, /* R1104 - DAC AEC Control 1 */ + { 0x00000458, 0x0000 }, /* R1112 - Noise Gate Control */ + { 0x000004A0, 0x3480 }, /* R1184 - HP1 Short Circuit Ctrl */ + { 0x00000500, 0x000C }, /* R1280 - AIF1 BCLK Ctrl */ + { 0x00000501, 0x0008 }, /* R1281 - AIF1 Tx Pin Ctrl */ + { 0x00000502, 0x0000 }, /* R1282 - AIF1 Rx Pin Ctrl */ + { 0x00000503, 0x0000 }, /* R1283 - AIF1 Rate Ctrl */ + { 0x00000504, 0x0000 }, /* R1284 - AIF1 Format */ + { 0x00000506, 0x0040 }, /* R1286 - AIF1 Rx BCLK Rate */ + { 0x00000507, 0x1818 }, /* R1287 - AIF1 Frame Ctrl 1 */ + { 0x00000508, 0x1818 }, /* R1288 - AIF1 Frame Ctrl 2 */ + { 0x00000509, 0x0000 }, /* R1289 - AIF1 Frame Ctrl 3 */ + { 0x0000050A, 0x0001 }, /* R1290 - AIF1 Frame Ctrl 4 */ + { 0x0000050B, 0x0002 }, /* R1291 - AIF1 Frame Ctrl 5 */ + { 0x0000050C, 0x0003 }, /* R1292 - AIF1 Frame Ctrl 6 */ + { 0x0000050D, 0x0004 }, /* R1293 - AIF1 Frame Ctrl 7 */ + { 0x0000050E, 0x0005 }, /* R1294 - AIF1 Frame Ctrl 8 */ + { 0x0000050F, 0x0006 }, /* R1295 - AIF1 Frame Ctrl 9 */ + { 0x00000510, 0x0007 }, /* R1296 - AIF1 Frame Ctrl 10 */ + { 0x00000511, 0x0000 }, /* R1297 - AIF1 Frame Ctrl 11 */ + { 0x00000512, 0x0001 }, /* R1298 - AIF1 Frame Ctrl 12 */ + { 0x00000513, 0x0002 }, /* R1299 - AIF1 Frame Ctrl 13 */ + { 0x00000514, 0x0003 }, /* R1300 - AIF1 Frame Ctrl 14 */ + { 0x00000515, 0x0004 }, /* R1301 - AIF1 Frame Ctrl 15 */ + { 0x00000516, 0x0005 }, /* R1302 - AIF1 Frame Ctrl 16 */ + { 0x00000517, 0x0006 }, /* R1303 - AIF1 Frame Ctrl 17 */ + { 0x00000518, 0x0007 }, /* R1304 - AIF1 Frame Ctrl 18 */ + { 0x00000519, 0x0000 }, /* R1305 - AIF1 Tx Enables */ + { 0x0000051A, 0x0000 }, /* R1306 - AIF1 Rx Enables */ + { 0x00000540, 0x000C }, /* R1344 - AIF2 BCLK Ctrl */ + { 0x00000541, 0x0008 }, /* R1345 - AIF2 Tx Pin Ctrl */ + { 0x00000542, 0x0000 }, /* R1346 - AIF2 Rx Pin Ctrl */ + { 0x00000543, 0x0000 }, /* R1347 - AIF2 Rate Ctrl */ + { 0x00000544, 0x0000 }, /* R1348 - AIF2 Format */ + { 0x00000546, 0x0040 }, /* R1350 - AIF2 Rx BCLK Rate */ + { 0x00000547, 0x1818 }, /* R1351 - AIF2 Frame Ctrl 1 */ + { 0x00000548, 0x1818 }, /* R1352 - AIF2 Frame Ctrl 2 */ + { 0x00000549, 0x0000 }, /* R1353 - AIF2 Frame Ctrl 3 */ + { 0x0000054A, 0x0001 }, /* R1354 - AIF2 Frame Ctrl 4 */ + { 0x0000054B, 0x0002 }, /* R1355 - AIF2 Frame Ctrl 5 */ + { 0x0000054C, 0x0003 }, /* R1356 - AIF2 Frame Ctrl 6 */ + { 0x0000054D, 0x0004 }, /* R1357 - AIF2 Frame Ctrl 7 */ + { 0x0000054E, 0x0005 }, /* R1358 - AIF2 Frame Ctrl 8 */ + { 0x00000551, 0x0000 }, /* R1361 - AIF2 Frame Ctrl 11 */ + { 0x00000552, 0x0001 }, /* R1362 - AIF2 Frame Ctrl 12 */ + { 0x00000553, 0x0002 }, /* R1363 - AIF2 Frame Ctrl 13 */ + { 0x00000554, 0x0003 }, /* R1364 - AIF2 Frame Ctrl 14 */ + { 0x00000555, 0x0004 }, /* R1365 - AIF2 Frame Ctrl 15 */ + { 0x00000556, 0x0005 }, /* R1366 - AIF2 Frame Ctrl 16 */ + { 0x00000559, 0x0000 }, /* R1369 - AIF2 Tx Enables */ + { 0x0000055A, 0x0000 }, /* R1370 - AIF2 Rx Enables */ + { 0x00000580, 0x000C }, /* R1408 - AIF3 BCLK Ctrl */ + { 0x00000581, 0x0008 }, /* R1409 - AIF3 Tx Pin Ctrl */ + { 0x00000582, 0x0000 }, /* R1410 - AIF3 Rx Pin Ctrl */ + { 0x00000583, 0x0000 }, /* R1411 - AIF3 Rate Ctrl */ + { 0x00000584, 0x0000 }, /* R1412 - AIF3 Format */ + { 0x00000586, 0x0040 }, /* R1414 - AIF3 Rx BCLK Rate */ + { 0x00000587, 0x1818 }, /* R1415 - AIF3 Frame Ctrl 1 */ + { 0x00000588, 0x1818 }, /* R1416 - AIF3 Frame Ctrl 2 */ + { 0x00000589, 0x0000 }, /* R1417 - AIF3 Frame Ctrl 3 */ + { 0x0000058A, 0x0001 }, /* R1418 - AIF3 Frame Ctrl 4 */ + { 0x00000591, 0x0000 }, /* R1425 - AIF3 Frame Ctrl 11 */ + { 0x00000592, 0x0001 }, /* R1426 - AIF3 Frame Ctrl 12 */ + { 0x00000599, 0x0000 }, /* R1433 - AIF3 Tx Enables */ + { 0x0000059A, 0x0000 }, /* R1434 - AIF3 Rx Enables */ + { 0x00000640, 0x0000 }, /* R1600 - PWM1MIX Input 1 Source */ + { 0x00000641, 0x0080 }, /* R1601 - PWM1MIX Input 1 Volume */ + { 0x00000642, 0x0000 }, /* R1602 - PWM1MIX Input 2 Source */ + { 0x00000643, 0x0080 }, /* R1603 - PWM1MIX Input 2 Volume */ + { 0x00000644, 0x0000 }, /* R1604 - PWM1MIX Input 3 Source */ + { 0x00000645, 0x0080 }, /* R1605 - PWM1MIX Input 3 Volume */ + { 0x00000646, 0x0000 }, /* R1606 - PWM1MIX Input 4 Source */ + { 0x00000647, 0x0080 }, /* R1607 - PWM1MIX Input 4 Volume */ + { 0x00000648, 0x0000 }, /* R1608 - PWM2MIX Input 1 Source */ + { 0x00000649, 0x0080 }, /* R1609 - PWM2MIX Input 1 Volume */ + { 0x0000064A, 0x0000 }, /* R1610 - PWM2MIX Input 2 Source */ + { 0x0000064B, 0x0080 }, /* R1611 - PWM2MIX Input 2 Volume */ + { 0x0000064C, 0x0000 }, /* R1612 - PWM2MIX Input 3 Source */ + { 0x0000064D, 0x0080 }, /* R1613 - PWM2MIX Input 3 Volume */ + { 0x0000064E, 0x0000 }, /* R1614 - PWM2MIX Input 4 Source */ + { 0x0000064F, 0x0080 }, /* R1615 - PWM2MIX Input 4 Volume */ + { 0x00000680, 0x0000 }, /* R1664 - OUT1LMIX Input 1 Source */ + { 0x00000681, 0x0080 }, /* R1665 - OUT1LMIX Input 1 Volume */ + { 0x00000682, 0x0000 }, /* R1666 - OUT1LMIX Input 2 Source */ + { 0x00000683, 0x0080 }, /* R1667 - OUT1LMIX Input 2 Volume */ + { 0x00000684, 0x0000 }, /* R1668 - OUT1LMIX Input 3 Source */ + { 0x00000685, 0x0080 }, /* R1669 - OUT1LMIX Input 3 Volume */ + { 0x00000686, 0x0000 }, /* R1670 - OUT1LMIX Input 4 Source */ + { 0x00000687, 0x0080 }, /* R1671 - OUT1LMIX Input 4 Volume */ + { 0x00000688, 0x0000 }, /* R1672 - OUT1RMIX Input 1 Source */ + { 0x00000689, 0x0080 }, /* R1673 - OUT1RMIX Input 1 Volume */ + { 0x0000068A, 0x0000 }, /* R1674 - OUT1RMIX Input 2 Source */ + { 0x0000068B, 0x0080 }, /* R1675 - OUT1RMIX Input 2 Volume */ + { 0x0000068C, 0x0000 }, /* R1676 - OUT1RMIX Input 3 Source */ + { 0x0000068D, 0x0080 }, /* R1677 - OUT1RMIX Input 3 Volume */ + { 0x0000068E, 0x0000 }, /* R1678 - OUT1RMIX Input 4 Source */ + { 0x0000068F, 0x0080 }, /* R1679 - OUT1RMIX Input 4 Volume */ + { 0x000006B0, 0x0000 }, /* R1712 - OUT4LMIX Input 1 Source */ + { 0x000006B1, 0x0080 }, /* R1713 - OUT4LMIX Input 1 Volume */ + { 0x000006B2, 0x0000 }, /* R1714 - OUT4LMIX Input 2 Source */ + { 0x000006B3, 0x0080 }, /* R1715 - OUT4LMIX Input 2 Volume */ + { 0x000006B4, 0x0000 }, /* R1716 - OUT4LMIX Input 3 Source */ + { 0x000006B5, 0x0080 }, /* R1717 - OUT4LMIX Input 3 Volume */ + { 0x000006B6, 0x0000 }, /* R1718 - OUT4LMIX Input 4 Source */ + { 0x000006B7, 0x0080 }, /* R1719 - OUT4LMIX Input 4 Volume */ + { 0x00000700, 0x0000 }, /* R1792 - AIF1TX1MIX Input 1 Source */ + { 0x00000701, 0x0080 }, /* R1793 - AIF1TX1MIX Input 1 Volume */ + { 0x00000702, 0x0000 }, /* R1794 - AIF1TX1MIX Input 2 Source */ + { 0x00000703, 0x0080 }, /* R1795 - AIF1TX1MIX Input 2 Volume */ + { 0x00000704, 0x0000 }, /* R1796 - AIF1TX1MIX Input 3 Source */ + { 0x00000705, 0x0080 }, /* R1797 - AIF1TX1MIX Input 3 Volume */ + { 0x00000706, 0x0000 }, /* R1798 - AIF1TX1MIX Input 4 Source */ + { 0x00000707, 0x0080 }, /* R1799 - AIF1TX1MIX Input 4 Volume */ + { 0x00000708, 0x0000 }, /* R1800 - AIF1TX2MIX Input 1 Source */ + { 0x00000709, 0x0080 }, /* R1801 - AIF1TX2MIX Input 1 Volume */ + { 0x0000070A, 0x0000 }, /* R1802 - AIF1TX2MIX Input 2 Source */ + { 0x0000070B, 0x0080 }, /* R1803 - AIF1TX2MIX Input 2 Volume */ + { 0x0000070C, 0x0000 }, /* R1804 - AIF1TX2MIX Input 3 Source */ + { 0x0000070D, 0x0080 }, /* R1805 - AIF1TX2MIX Input 3 Volume */ + { 0x0000070E, 0x0000 }, /* R1806 - AIF1TX2MIX Input 4 Source */ + { 0x0000070F, 0x0080 }, /* R1807 - AIF1TX2MIX Input 4 Volume */ + { 0x00000710, 0x0000 }, /* R1808 - AIF1TX3MIX Input 1 Source */ + { 0x00000711, 0x0080 }, /* R1809 - AIF1TX3MIX Input 1 Volume */ + { 0x00000712, 0x0000 }, /* R1810 - AIF1TX3MIX Input 2 Source */ + { 0x00000713, 0x0080 }, /* R1811 - AIF1TX3MIX Input 2 Volume */ + { 0x00000714, 0x0000 }, /* R1812 - AIF1TX3MIX Input 3 Source */ + { 0x00000715, 0x0080 }, /* R1813 - AIF1TX3MIX Input 3 Volume */ + { 0x00000716, 0x0000 }, /* R1814 - AIF1TX3MIX Input 4 Source */ + { 0x00000717, 0x0080 }, /* R1815 - AIF1TX3MIX Input 4 Volume */ + { 0x00000718, 0x0000 }, /* R1816 - AIF1TX4MIX Input 1 Source */ + { 0x00000719, 0x0080 }, /* R1817 - AIF1TX4MIX Input 1 Volume */ + { 0x0000071A, 0x0000 }, /* R1818 - AIF1TX4MIX Input 2 Source */ + { 0x0000071B, 0x0080 }, /* R1819 - AIF1TX4MIX Input 2 Volume */ + { 0x0000071C, 0x0000 }, /* R1820 - AIF1TX4MIX Input 3 Source */ + { 0x0000071D, 0x0080 }, /* R1821 - AIF1TX4MIX Input 3 Volume */ + { 0x0000071E, 0x0000 }, /* R1822 - AIF1TX4MIX Input 4 Source */ + { 0x0000071F, 0x0080 }, /* R1823 - AIF1TX4MIX Input 4 Volume */ + { 0x00000720, 0x0000 }, /* R1824 - AIF1TX5MIX Input 1 Source */ + { 0x00000721, 0x0080 }, /* R1825 - AIF1TX5MIX Input 1 Volume */ + { 0x00000722, 0x0000 }, /* R1826 - AIF1TX5MIX Input 2 Source */ + { 0x00000723, 0x0080 }, /* R1827 - AIF1TX5MIX Input 2 Volume */ + { 0x00000724, 0x0000 }, /* R1828 - AIF1TX5MIX Input 3 Source */ + { 0x00000725, 0x0080 }, /* R1829 - AIF1TX5MIX Input 3 Volume */ + { 0x00000726, 0x0000 }, /* R1830 - AIF1TX5MIX Input 4 Source */ + { 0x00000727, 0x0080 }, /* R1831 - AIF1TX5MIX Input 4 Volume */ + { 0x00000728, 0x0000 }, /* R1832 - AIF1TX6MIX Input 1 Source */ + { 0x00000729, 0x0080 }, /* R1833 - AIF1TX6MIX Input 1 Volume */ + { 0x0000072A, 0x0000 }, /* R1834 - AIF1TX6MIX Input 2 Source */ + { 0x0000072B, 0x0080 }, /* R1835 - AIF1TX6MIX Input 2 Volume */ + { 0x0000072C, 0x0000 }, /* R1836 - AIF1TX6MIX Input 3 Source */ + { 0x0000072D, 0x0080 }, /* R1837 - AIF1TX6MIX Input 3 Volume */ + { 0x0000072E, 0x0000 }, /* R1838 - AIF1TX6MIX Input 4 Source */ + { 0x0000072F, 0x0080 }, /* R1839 - AIF1TX6MIX Input 4 Volume */ + { 0x00000730, 0x0000 }, /* R1840 - AIF1TX7MIX Input 1 Source */ + { 0x00000731, 0x0080 }, /* R1841 - AIF1TX7MIX Input 1 Volume */ + { 0x00000732, 0x0000 }, /* R1842 - AIF1TX7MIX Input 2 Source */ + { 0x00000733, 0x0080 }, /* R1843 - AIF1TX7MIX Input 2 Volume */ + { 0x00000734, 0x0000 }, /* R1844 - AIF1TX7MIX Input 3 Source */ + { 0x00000735, 0x0080 }, /* R1845 - AIF1TX7MIX Input 3 Volume */ + { 0x00000736, 0x0000 }, /* R1846 - AIF1TX7MIX Input 4 Source */ + { 0x00000737, 0x0080 }, /* R1847 - AIF1TX7MIX Input 4 Volume */ + { 0x00000738, 0x0000 }, /* R1848 - AIF1TX8MIX Input 1 Source */ + { 0x00000739, 0x0080 }, /* R1849 - AIF1TX8MIX Input 1 Volume */ + { 0x0000073A, 0x0000 }, /* R1850 - AIF1TX8MIX Input 2 Source */ + { 0x0000073B, 0x0080 }, /* R1851 - AIF1TX8MIX Input 2 Volume */ + { 0x0000073C, 0x0000 }, /* R1852 - AIF1TX8MIX Input 3 Source */ + { 0x0000073D, 0x0080 }, /* R1853 - AIF1TX8MIX Input 3 Volume */ + { 0x0000073E, 0x0000 }, /* R1854 - AIF1TX8MIX Input 4 Source */ + { 0x0000073F, 0x0080 }, /* R1855 - AIF1TX8MIX Input 4 Volume */ + { 0x00000740, 0x0000 }, /* R1856 - AIF2TX1MIX Input 1 Source */ + { 0x00000741, 0x0080 }, /* R1857 - AIF2TX1MIX Input 1 Volume */ + { 0x00000742, 0x0000 }, /* R1858 - AIF2TX1MIX Input 2 Source */ + { 0x00000743, 0x0080 }, /* R1859 - AIF2TX1MIX Input 2 Volume */ + { 0x00000744, 0x0000 }, /* R1860 - AIF2TX1MIX Input 3 Source */ + { 0x00000745, 0x0080 }, /* R1861 - AIF2TX1MIX Input 3 Volume */ + { 0x00000746, 0x0000 }, /* R1862 - AIF2TX1MIX Input 4 Source */ + { 0x00000747, 0x0080 }, /* R1863 - AIF2TX1MIX Input 4 Volume */ + { 0x00000748, 0x0000 }, /* R1864 - AIF2TX2MIX Input 1 Source */ + { 0x00000749, 0x0080 }, /* R1865 - AIF2TX2MIX Input 1 Volume */ + { 0x0000074A, 0x0000 }, /* R1866 - AIF2TX2MIX Input 2 Source */ + { 0x0000074B, 0x0080 }, /* R1867 - AIF2TX2MIX Input 2 Volume */ + { 0x0000074C, 0x0000 }, /* R1868 - AIF2TX2MIX Input 3 Source */ + { 0x0000074D, 0x0080 }, /* R1869 - AIF2TX2MIX Input 3 Volume */ + { 0x0000074E, 0x0000 }, /* R1870 - AIF2TX2MIX Input 4 Source */ + { 0x0000074F, 0x0080 }, /* R1871 - AIF2TX2MIX Input 4 Volume */ + { 0x00000750, 0x0000 }, /* R1872 - AIF2TX3MIX Input 1 Source */ + { 0x00000751, 0x0080 }, /* R1873 - AIF2TX3MIX Input 1 Volume */ + { 0x00000752, 0x0000 }, /* R1874 - AIF2TX3MIX Input 2 Source */ + { 0x00000753, 0x0080 }, /* R1875 - AIF2TX3MIX Input 2 Volume */ + { 0x00000754, 0x0000 }, /* R1876 - AIF2TX3MIX Input 3 Source */ + { 0x00000755, 0x0080 }, /* R1877 - AIF2TX3MIX Input 3 Volume */ + { 0x00000756, 0x0000 }, /* R1878 - AIF2TX3MIX Input 4 Source */ + { 0x00000757, 0x0080 }, /* R1879 - AIF2TX3MIX Input 4 Volume */ + { 0x00000758, 0x0000 }, /* R1880 - AIF2TX4MIX Input 1 Source */ + { 0x00000759, 0x0080 }, /* R1881 - AIF2TX4MIX Input 1 Volume */ + { 0x0000075A, 0x0000 }, /* R1882 - AIF2TX4MIX Input 2 Source */ + { 0x0000075B, 0x0080 }, /* R1883 - AIF2TX4MIX Input 2 Volume */ + { 0x0000075C, 0x0000 }, /* R1884 - AIF2TX4MIX Input 3 Source */ + { 0x0000075D, 0x0080 }, /* R1885 - AIF2TX4MIX Input 3 Volume */ + { 0x0000075E, 0x0000 }, /* R1886 - AIF2TX4MIX Input 4 Source */ + { 0x0000075F, 0x0080 }, /* R1887 - AIF2TX4MIX Input 4 Volume */ + { 0x00000760, 0x0000 }, /* R1888 - AIF2TX5MIX Input 1 Source */ + { 0x00000761, 0x0080 }, /* R1889 - AIF2TX5MIX Input 1 Volume */ + { 0x00000762, 0x0000 }, /* R1890 - AIF2TX5MIX Input 2 Source */ + { 0x00000763, 0x0080 }, /* R1891 - AIF2TX5MIX Input 2 Volume */ + { 0x00000764, 0x0000 }, /* R1892 - AIF2TX5MIX Input 3 Source */ + { 0x00000765, 0x0080 }, /* R1893 - AIF2TX5MIX Input 3 Volume */ + { 0x00000766, 0x0000 }, /* R1894 - AIF2TX5MIX Input 4 Source */ + { 0x00000767, 0x0080 }, /* R1895 - AIF2TX5MIX Input 4 Volume */ + { 0x00000768, 0x0000 }, /* R1896 - AIF2TX6MIX Input 1 Source */ + { 0x00000769, 0x0080 }, /* R1897 - AIF2TX6MIX Input 1 Volume */ + { 0x0000076A, 0x0000 }, /* R1898 - AIF2TX6MIX Input 2 Source */ + { 0x0000076B, 0x0080 }, /* R1899 - AIF2TX6MIX Input 2 Volume */ + { 0x0000076C, 0x0000 }, /* R1900 - AIF2TX6MIX Input 3 Source */ + { 0x0000076D, 0x0080 }, /* R1901 - AIF2TX6MIX Input 3 Volume */ + { 0x0000076E, 0x0000 }, /* R1902 - AIF2TX6MIX Input 4 Source */ + { 0x0000076F, 0x0080 }, /* R1903 - AIF2TX6MIX Input 4 Volume */ + { 0x00000780, 0x0000 }, /* R1920 - AIF3TX1MIX Input 1 Source */ + { 0x00000781, 0x0080 }, /* R1921 - AIF3TX1MIX Input 1 Volume */ + { 0x00000782, 0x0000 }, /* R1922 - AIF3TX1MIX Input 2 Source */ + { 0x00000783, 0x0080 }, /* R1923 - AIF3TX1MIX Input 2 Volume */ + { 0x00000784, 0x0000 }, /* R1924 - AIF3TX1MIX Input 3 Source */ + { 0x00000785, 0x0080 }, /* R1925 - AIF3TX1MIX Input 3 Volume */ + { 0x00000786, 0x0000 }, /* R1926 - AIF3TX1MIX Input 4 Source */ + { 0x00000787, 0x0080 }, /* R1927 - AIF3TX1MIX Input 4 Volume */ + { 0x00000788, 0x0000 }, /* R1928 - AIF3TX2MIX Input 1 Source */ + { 0x00000789, 0x0080 }, /* R1929 - AIF3TX2MIX Input 1 Volume */ + { 0x0000078A, 0x0000 }, /* R1930 - AIF3TX2MIX Input 2 Source */ + { 0x0000078B, 0x0080 }, /* R1931 - AIF3TX2MIX Input 2 Volume */ + { 0x0000078C, 0x0000 }, /* R1932 - AIF3TX2MIX Input 3 Source */ + { 0x0000078D, 0x0080 }, /* R1933 - AIF3TX2MIX Input 3 Volume */ + { 0x0000078E, 0x0000 }, /* R1934 - AIF3TX2MIX Input 4 Source */ + { 0x0000078F, 0x0080 }, /* R1935 - AIF3TX2MIX Input 4 Volume */ + { 0x00000880, 0x0000 }, /* R2176 - EQ1MIX Input 1 Source */ + { 0x00000881, 0x0080 }, /* R2177 - EQ1MIX Input 1 Volume */ + { 0x00000882, 0x0000 }, /* R2178 - EQ1MIX Input 2 Source */ + { 0x00000883, 0x0080 }, /* R2179 - EQ1MIX Input 2 Volume */ + { 0x00000884, 0x0000 }, /* R2180 - EQ1MIX Input 3 Source */ + { 0x00000885, 0x0080 }, /* R2181 - EQ1MIX Input 3 Volume */ + { 0x00000886, 0x0000 }, /* R2182 - EQ1MIX Input 4 Source */ + { 0x00000887, 0x0080 }, /* R2183 - EQ1MIX Input 4 Volume */ + { 0x00000888, 0x0000 }, /* R2184 - EQ2MIX Input 1 Source */ + { 0x00000889, 0x0080 }, /* R2185 - EQ2MIX Input 1 Volume */ + { 0x0000088A, 0x0000 }, /* R2186 - EQ2MIX Input 2 Source */ + { 0x0000088B, 0x0080 }, /* R2187 - EQ2MIX Input 2 Volume */ + { 0x0000088C, 0x0000 }, /* R2188 - EQ2MIX Input 3 Source */ + { 0x0000088D, 0x0080 }, /* R2189 - EQ2MIX Input 3 Volume */ + { 0x0000088E, 0x0000 }, /* R2190 - EQ2MIX Input 4 Source */ + { 0x0000088F, 0x0080 }, /* R2191 - EQ2MIX Input 4 Volume */ + { 0x000008C0, 0x0000 }, /* R2240 - DRC1LMIX Input 1 Source */ + { 0x000008C1, 0x0080 }, /* R2241 - DRC1LMIX Input 1 Volume */ + { 0x000008C2, 0x0000 }, /* R2242 - DRC1LMIX Input 2 Source */ + { 0x000008C3, 0x0080 }, /* R2243 - DRC1LMIX Input 2 Volume */ + { 0x000008C4, 0x0000 }, /* R2244 - DRC1LMIX Input 3 Source */ + { 0x000008C5, 0x0080 }, /* R2245 - DRC1LMIX Input 3 Volume */ + { 0x000008C6, 0x0000 }, /* R2246 - DRC1LMIX Input 4 Source */ + { 0x000008C7, 0x0080 }, /* R2247 - DRC1LMIX Input 4 Volume */ + { 0x000008C8, 0x0000 }, /* R2248 - DRC1RMIX Input 1 Source */ + { 0x000008C9, 0x0080 }, /* R2249 - DRC1RMIX Input 1 Volume */ + { 0x000008CA, 0x0000 }, /* R2250 - DRC1RMIX Input 2 Source */ + { 0x000008CB, 0x0080 }, /* R2251 - DRC1RMIX Input 2 Volume */ + { 0x000008CC, 0x0000 }, /* R2252 - DRC1RMIX Input 3 Source */ + { 0x000008CD, 0x0080 }, /* R2253 - DRC1RMIX Input 3 Volume */ + { 0x000008CE, 0x0000 }, /* R2254 - DRC1RMIX Input 4 Source */ + { 0x000008CF, 0x0080 }, /* R2255 - DRC1RMIX Input 4 Volume */ + { 0x000008D0, 0x0000 }, /* R2256 - DRC2LMIX Input 1 Source */ + { 0x000008D1, 0x0080 }, /* R2257 - DRC2LMIX Input 1 Volume */ + { 0x000008D2, 0x0000 }, /* R2258 - DRC2LMIX Input 2 Source */ + { 0x000008D3, 0x0080 }, /* R2259 - DRC2LMIX Input 2 Volume */ + { 0x000008D4, 0x0000 }, /* R2260 - DRC2LMIX Input 3 Source */ + { 0x000008D5, 0x0080 }, /* R2261 - DRC2LMIX Input 3 Volume */ + { 0x000008D6, 0x0000 }, /* R2262 - DRC2LMIX Input 4 Source */ + { 0x000008D7, 0x0080 }, /* R2263 - DRC2LMIX Input 4 Volume */ + { 0x000008D8, 0x0000 }, /* R2264 - DRC2RMIX Input 1 Source */ + { 0x000008D9, 0x0080 }, /* R2265 - DRC2RMIX Input 1 Volume */ + { 0x000008DA, 0x0000 }, /* R2266 - DRC2RMIX Input 2 Source */ + { 0x000008DB, 0x0080 }, /* R2267 - DRC2RMIX Input 2 Volume */ + { 0x000008DC, 0x0000 }, /* R2268 - DRC2RMIX Input 3 Source */ + { 0x000008DD, 0x0080 }, /* R2269 - DRC2RMIX Input 3 Volume */ + { 0x000008DE, 0x0000 }, /* R2270 - DRC2RMIX Input 4 Source */ + { 0x000008DF, 0x0080 }, /* R2271 - DRC2RMIX Input 4 Volume */ + { 0x00000900, 0x0000 }, /* R2304 - HPLP1MIX Input 1 Source */ + { 0x00000901, 0x0080 }, /* R2305 - HPLP1MIX Input 1 Volume */ + { 0x00000902, 0x0000 }, /* R2306 - HPLP1MIX Input 2 Source */ + { 0x00000903, 0x0080 }, /* R2307 - HPLP1MIX Input 2 Volume */ + { 0x00000904, 0x0000 }, /* R2308 - HPLP1MIX Input 3 Source */ + { 0x00000905, 0x0080 }, /* R2309 - HPLP1MIX Input 3 Volume */ + { 0x00000906, 0x0000 }, /* R2310 - HPLP1MIX Input 4 Source */ + { 0x00000907, 0x0080 }, /* R2311 - HPLP1MIX Input 4 Volume */ + { 0x00000908, 0x0000 }, /* R2312 - HPLP2MIX Input 1 Source */ + { 0x00000909, 0x0080 }, /* R2313 - HPLP2MIX Input 1 Volume */ + { 0x0000090A, 0x0000 }, /* R2314 - HPLP2MIX Input 2 Source */ + { 0x0000090B, 0x0080 }, /* R2315 - HPLP2MIX Input 2 Volume */ + { 0x0000090C, 0x0000 }, /* R2316 - HPLP2MIX Input 3 Source */ + { 0x0000090D, 0x0080 }, /* R2317 - HPLP2MIX Input 3 Volume */ + { 0x0000090E, 0x0000 }, /* R2318 - HPLP2MIX Input 4 Source */ + { 0x0000090F, 0x0080 }, /* R2319 - HPLP2MIX Input 4 Volume */ + { 0x00000910, 0x0000 }, /* R2320 - HPLP3MIX Input 1 Source */ + { 0x00000911, 0x0080 }, /* R2321 - HPLP3MIX Input 1 Volume */ + { 0x00000912, 0x0000 }, /* R2322 - HPLP3MIX Input 2 Source */ + { 0x00000913, 0x0080 }, /* R2323 - HPLP3MIX Input 2 Volume */ + { 0x00000914, 0x0000 }, /* R2324 - HPLP3MIX Input 3 Source */ + { 0x00000915, 0x0080 }, /* R2325 - HPLP3MIX Input 3 Volume */ + { 0x00000916, 0x0000 }, /* R2326 - HPLP3MIX Input 4 Source */ + { 0x00000917, 0x0080 }, /* R2327 - HPLP3MIX Input 4 Volume */ + { 0x00000918, 0x0000 }, /* R2328 - HPLP4MIX Input 1 Source */ + { 0x00000919, 0x0080 }, /* R2329 - HPLP4MIX Input 1 Volume */ + { 0x0000091A, 0x0000 }, /* R2330 - HPLP4MIX Input 2 Source */ + { 0x0000091B, 0x0080 }, /* R2331 - HPLP4MIX Input 2 Volume */ + { 0x0000091C, 0x0000 }, /* R2332 - HPLP4MIX Input 3 Source */ + { 0x0000091D, 0x0080 }, /* R2333 - HPLP4MIX Input 3 Volume */ + { 0x0000091E, 0x0000 }, /* R2334 - HPLP4MIX Input 4 Source */ + { 0x0000091F, 0x0080 }, /* R2335 - HPLP4MIX Input 4 Volume */ + { 0x00000980, 0x0000 }, /* R2432 - DSP2LMIX Input 1 Source */ + { 0x00000981, 0x0080 }, /* R2433 - DSP2LMIX Input 1 Volume */ + { 0x00000982, 0x0000 }, /* R2434 - DSP2LMIX Input 2 Source */ + { 0x00000983, 0x0080 }, /* R2435 - DSP2LMIX Input 2 Volume */ + { 0x00000984, 0x0000 }, /* R2436 - DSP2LMIX Input 3 Source */ + { 0x00000985, 0x0080 }, /* R2437 - DSP2LMIX Input 3 Volume */ + { 0x00000986, 0x0000 }, /* R2438 - DSP2LMIX Input 4 Source */ + { 0x00000987, 0x0080 }, /* R2439 - DSP2LMIX Input 4 Volume */ + { 0x00000988, 0x0000 }, /* R2440 - DSP2RMIX Input 1 Source */ + { 0x00000989, 0x0080 }, /* R2441 - DSP2RMIX Input 1 Volume */ + { 0x0000098A, 0x0000 }, /* R2442 - DSP2RMIX Input 2 Source */ + { 0x0000098B, 0x0080 }, /* R2443 - DSP2RMIX Input 2 Volume */ + { 0x0000098C, 0x0000 }, /* R2444 - DSP2RMIX Input 3 Source */ + { 0x0000098D, 0x0080 }, /* R2445 - DSP2RMIX Input 3 Volume */ + { 0x0000098E, 0x0000 }, /* R2446 - DSP2RMIX Input 4 Source */ + { 0x0000098F, 0x0080 }, /* R2447 - DSP2RMIX Input 4 Volume */ + { 0x00000990, 0x0000 }, /* R2448 - DSP2AUX1MIX Input 1 Source */ + { 0x00000998, 0x0000 }, /* R2456 - DSP2AUX2MIX Input 1 Source */ + { 0x000009A0, 0x0000 }, /* R2464 - DSP2AUX3MIX Input 1 Source */ + { 0x000009A8, 0x0000 }, /* R2472 - DSP2AUX4MIX Input 1 Source */ + { 0x000009B0, 0x0000 }, /* R2480 - DSP2AUX5MIX Input 1 Source */ + { 0x000009B8, 0x0000 }, /* R2488 - DSP2AUX6MIX Input 1 Source */ + { 0x000009C0, 0x0000 }, /* R2496 - DSP3LMIX Input 1 Source */ + { 0x000009C1, 0x0080 }, /* R2497 - DSP3LMIX Input 1 Volume */ + { 0x000009C2, 0x0000 }, /* R2498 - DSP3LMIX Input 2 Source */ + { 0x000009C3, 0x0080 }, /* R2499 - DSP3LMIX Input 2 Volume */ + { 0x000009C4, 0x0000 }, /* R2500 - DSP3LMIX Input 3 Source */ + { 0x000009C5, 0x0080 }, /* R2501 - DSP3LMIX Input 3 Volume */ + { 0x000009C6, 0x0000 }, /* R2502 - DSP3LMIX Input 4 Source */ + { 0x000009C7, 0x0080 }, /* R2503 - DSP3LMIX Input 4 Volume */ + { 0x000009C8, 0x0000 }, /* R2504 - DSP3RMIX Input 1 Source */ + { 0x000009C9, 0x0080 }, /* R2505 - DSP3RMIX Input 1 Volume */ + { 0x000009CA, 0x0000 }, /* R2506 - DSP3RMIX Input 2 Source */ + { 0x000009CB, 0x0080 }, /* R2507 - DSP3RMIX Input 2 Volume */ + { 0x000009CC, 0x0000 }, /* R2508 - DSP3RMIX Input 3 Source */ + { 0x000009CD, 0x0080 }, /* R2509 - DSP3RMIX Input 3 Volume */ + { 0x000009CE, 0x0000 }, /* R2510 - DSP3RMIX Input 4 Source */ + { 0x000009CF, 0x0080 }, /* R2511 - DSP3RMIX Input 4 Volume */ + { 0x000009D0, 0x0000 }, /* R2512 - DSP3AUX1MIX Input 1 Source */ + { 0x000009D8, 0x0000 }, /* R2520 - DSP3AUX2MIX Input 1 Source */ + { 0x000009E0, 0x0000 }, /* R2528 - DSP3AUX3MIX Input 1 Source */ + { 0x000009E8, 0x0000 }, /* R2536 - DSP3AUX4MIX Input 1 Source */ + { 0x000009F0, 0x0000 }, /* R2544 - DSP3AUX5MIX Input 1 Source */ + { 0x000009F8, 0x0000 }, /* R2552 - DSP3AUX6MIX Input 1 Source */ + { 0x00000A80, 0x0000 }, /* R2688 - ASRC1LMIX Input 1 Source */ + { 0x00000A88, 0x0000 }, /* R2696 - ASRC1RMIX Input 1 Source */ + { 0x00000A90, 0x0000 }, /* R2704 - ASRC2LMIX Input 1 Source */ + { 0x00000A98, 0x0000 }, /* R2712 - ASRC2RMIX Input 1 Source */ + { 0x00000B00, 0x0000 }, /* R2816 - ISRC1DEC1MIX Input 1 Source */ + { 0x00000B08, 0x0000 }, /* R2824 - ISRC1DEC2MIX Input 1 Source */ + { 0x00000B10, 0x0000 }, /* R2832 - ISRC1DEC3MIX Input 1 Source */ + { 0x00000B18, 0x0000 }, /* R2840 - ISRC1DEC4MIX Input 1 Source */ + { 0x00000B20, 0x0000 }, /* R2848 - ISRC1INT1MIX Input 1 Source */ + { 0x00000B28, 0x0000 }, /* R2856 - ISRC1INT2MIX Input 1 Source */ + { 0x00000B30, 0x0000 }, /* R2864 - ISRC1INT3MIX Input 1 Source */ + { 0x00000B38, 0x0000 }, /* R2872 - ISRC1INT4MIX Input 1 Source */ + { 0x00000B40, 0x0000 }, /* R2880 - ISRC2DEC1MIX Input 1 Source */ + { 0x00000B48, 0x0000 }, /* R2888 - ISRC2DEC2MIX Input 1 Source */ + { 0x00000B50, 0x0000 }, /* R2896 - ISRC2DEC3MIX Input 1 Source */ + { 0x00000B58, 0x0000 }, /* R2904 - ISRC2DEC4MIX Input 1 Source */ + { 0x00000B60, 0x0000 }, /* R2912 - ISRC2INT1MIX Input 1 Source */ + { 0x00000B68, 0x0000 }, /* R2920 - ISRC2INT2MIX Input 1 Source */ + { 0x00000B70, 0x0000 }, /* R2928 - ISRC2INT3MIX Input 1 Source */ + { 0x00000B78, 0x0000 }, /* R2936 - ISRC2INT4MIX Input 1 Source */ + { 0x00000B80, 0x0000 }, /* R2944 - ISRC3DEC1MIX Input 1 Source */ + { 0x00000B88, 0x0000 }, /* R2952 - ISRC3DEC2MIX Input 1 Source */ + { 0x00000B90, 0x0000 }, /* R2960 - ISRC3DEC3MIX Input 1 Source */ + { 0x00000B98, 0x0000 }, /* R2968 - ISRC3DEC4MIX Input 1 Source */ + { 0x00000BA0, 0x0000 }, /* R2976 - ISRC3INT1MIX Input 1 Source */ + { 0x00000BA8, 0x0000 }, /* R2984 - ISRC3INT2MIX Input 1 Source */ + { 0x00000BB0, 0x0000 }, /* R2992 - ISRC3INT3MIX Input 1 Source */ + { 0x00000BB8, 0x0000 }, /* R3000 - ISRC3INT4MIX Input 1 Source */ + { 0x00000C00, 0xA101 }, /* R3072 - GPIO1 CTRL */ + { 0x00000C01, 0xA101 }, /* R3073 - GPIO2 CTRL */ + { 0x00000C0F, 0x0400 }, /* R3087 - IRQ CTRL 1 */ + { 0x00000C10, 0x1000 }, /* R3088 - GPIO Debounce Config */ + { 0x00000C20, 0x0002 }, /* R3104 - Misc Pad Ctrl 1 */ + { 0x00000C21, 0x8001 }, /* R3105 - Misc Pad Ctrl 2 */ + { 0x00000C22, 0x0000 }, /* R3106 - Misc Pad Ctrl 3 */ + { 0x00000C23, 0x0000 }, /* R3107 - Misc Pad Ctrl 4 */ + { 0x00000C24, 0x0000 }, /* R3108 - Misc Pad Ctrl 5 */ + { 0x00000C25, 0x0000 }, /* R3109 - Misc Pad Ctrl 6 */ + { 0x00000C30, 0x0404 }, /* R3120 - Misc Pad Ctrl 7 */ + { 0x00000C32, 0x0404 }, /* R3122 - Misc Pad Ctrl 9 */ + { 0x00000C33, 0x0404 }, /* R3123 - Misc Pad Ctrl 10 */ + { 0x00000C34, 0x0404 }, /* R3124 - Misc Pad Ctrl 11 */ + { 0x00000C35, 0x0404 }, /* R3125 - Misc Pad Ctrl 12 */ + { 0x00000C36, 0x0400 }, /* R3126 - Misc Pad Ctrl 13 */ + { 0x00000C37, 0x0404 }, /* R3127 - Misc Pad Ctrl 14 */ + { 0x00000C39, 0x0400 }, /* R3129 - Misc Pad Ctrl 16 */ + { 0x00000D08, 0x0007 }, /* R3336 - Interrupt Status 1 Mask */ + { 0x00000D09, 0x06FF }, /* R3337 - Interrupt Status 2 Mask */ + { 0x00000D0A, 0xCFEF }, /* R3338 - Interrupt Status 3 Mask */ + { 0x00000D0B, 0xFFC3 }, /* R3339 - Interrupt Status 4 Mask */ + { 0x00000D0C, 0x000B }, /* R3340 - Interrupt Status 5 Mask */ + { 0x00000D0D, 0xD005 }, /* R3341 - Interrupt Status 6 Mask */ + { 0x00000D0F, 0x0000 }, /* R3343 - Interrupt Control */ + { 0x00000D18, 0x0007 }, /* R3352 - IRQ2 Status 1 Mask */ + { 0x00000D19, 0x06FF }, /* R3353 - IRQ2 Status 2 Mask */ + { 0x00000D1A, 0xCFEF }, /* R3354 - IRQ2 Status 3 Mask */ + { 0x00000D1B, 0xFFC3 }, /* R3355 - IRQ2 Status 4 Mask */ + { 0x00000D1C, 0x000B }, /* R3356 - IRQ2 Status 5 Mask */ + { 0x00000D1D, 0xD005 }, /* R3357 - IRQ2 Status 6 Mask */ + { 0x00000D1F, 0x0000 }, /* R3359 - IRQ2 Control */ + { 0x00000E00, 0x0000 }, /* R3584 - FX_Ctrl1 */ + { 0x00000E10, 0x6318 }, /* R3600 - EQ1_1 */ + { 0x00000E11, 0x6300 }, /* R3601 - EQ1_2 */ + { 0x00000E12, 0x0FC8 }, /* R3602 - EQ1_3 */ + { 0x00000E13, 0x03FE }, /* R3603 - EQ1_4 */ + { 0x00000E14, 0x00E0 }, /* R3604 - EQ1_5 */ + { 0x00000E15, 0x1EC4 }, /* R3605 - EQ1_6 */ + { 0x00000E16, 0xF136 }, /* R3606 - EQ1_7 */ + { 0x00000E17, 0x0409 }, /* R3607 - EQ1_8 */ + { 0x00000E18, 0x04CC }, /* R3608 - EQ1_9 */ + { 0x00000E19, 0x1C9B }, /* R3609 - EQ1_10 */ + { 0x00000E1A, 0xF337 }, /* R3610 - EQ1_11 */ + { 0x00000E1B, 0x040B }, /* R3611 - EQ1_12 */ + { 0x00000E1C, 0x0CBB }, /* R3612 - EQ1_13 */ + { 0x00000E1D, 0x16F8 }, /* R3613 - EQ1_14 */ + { 0x00000E1E, 0xF7D9 }, /* R3614 - EQ1_15 */ + { 0x00000E1F, 0x040A }, /* R3615 - EQ1_16 */ + { 0x00000E20, 0x1F14 }, /* R3616 - EQ1_17 */ + { 0x00000E21, 0x058C }, /* R3617 - EQ1_18 */ + { 0x00000E22, 0x0563 }, /* R3618 - EQ1_19 */ + { 0x00000E23, 0x4000 }, /* R3619 - EQ1_20 */ + { 0x00000E24, 0x0B75 }, /* R3620 - EQ1_21 */ + { 0x00000E26, 0x6318 }, /* R3622 - EQ2_1 */ + { 0x00000E27, 0x6300 }, /* R3623 - EQ2_2 */ + { 0x00000E28, 0x0FC8 }, /* R3624 - EQ2_3 */ + { 0x00000E29, 0x03FE }, /* R3625 - EQ2_4 */ + { 0x00000E2A, 0x00E0 }, /* R3626 - EQ2_5 */ + { 0x00000E2B, 0x1EC4 }, /* R3627 - EQ2_6 */ + { 0x00000E2C, 0xF136 }, /* R3628 - EQ2_7 */ + { 0x00000E2D, 0x0409 }, /* R3629 - EQ2_8 */ + { 0x00000E2E, 0x04CC }, /* R3630 - EQ2_9 */ + { 0x00000E2F, 0x1C9B }, /* R3631 - EQ2_10 */ + { 0x00000E30, 0xF337 }, /* R3632 - EQ2_11 */ + { 0x00000E31, 0x040B }, /* R3633 - EQ2_12 */ + { 0x00000E32, 0x0CBB }, /* R3634 - EQ2_13 */ + { 0x00000E33, 0x16F8 }, /* R3635 - EQ2_14 */ + { 0x00000E34, 0xF7D9 }, /* R3636 - EQ2_15 */ + { 0x00000E35, 0x040A }, /* R3637 - EQ2_16 */ + { 0x00000E36, 0x1F14 }, /* R3638 - EQ2_17 */ + { 0x00000E37, 0x058C }, /* R3639 - EQ2_18 */ + { 0x00000E38, 0x0563 }, /* R3640 - EQ2_19 */ + { 0x00000E39, 0x4000 }, /* R3641 - EQ2_20 */ + { 0x00000E3A, 0x0B75 }, /* R3642 - EQ2_21 */ + { 0x00000E80, 0x0018 }, /* R3712 - DRC1 ctrl1 */ + { 0x00000E81, 0x0933 }, /* R3713 - DRC1 ctrl2 */ + { 0x00000E82, 0x0018 }, /* R3714 - DRC1 ctrl3 */ + { 0x00000E83, 0x0000 }, /* R3715 - DRC1 ctrl4 */ + { 0x00000E84, 0x0000 }, /* R3716 - DRC1 ctrl5 */ + { 0x00000E89, 0x0018 }, /* R3721 - DRC2 ctrl1 */ + { 0x00000E8A, 0x0933 }, /* R3722 - DRC2 ctrl2 */ + { 0x00000E8B, 0x0018 }, /* R3723 - DRC2 ctrl3 */ + { 0x00000E8C, 0x0000 }, /* R3724 - DRC2 ctrl4 */ + { 0x00000E8D, 0x0000 }, /* R3725 - DRC2 ctrl5 */ + { 0x00000EC0, 0x0000 }, /* R3776 - HPLPF1_1 */ + { 0x00000EC1, 0x0000 }, /* R3777 - HPLPF1_2 */ + { 0x00000EC4, 0x0000 }, /* R3780 - HPLPF2_1 */ + { 0x00000EC5, 0x0000 }, /* R3781 - HPLPF2_2 */ + { 0x00000EC8, 0x0000 }, /* R3784 - HPLPF3_1 */ + { 0x00000EC9, 0x0000 }, /* R3785 - HPLPF3_2 */ + { 0x00000ECC, 0x0000 }, /* R3788 - HPLPF4_1 */ + { 0x00000ECD, 0x0000 }, /* R3789 - HPLPF4_2 */ + { 0x00000EE0, 0x0000 }, /* R3808 - ASRC_ENABLE */ + { 0x00000EE2, 0x0000 }, /* R3810 - ASRC_RATE1 */ + { 0x00000EE3, 0x4000 }, /* R3811 - ASRC_RATE2 */ + { 0x00000EF0, 0x0000 }, /* R3824 - ISRC 1 CTRL 1 */ + { 0x00000EF1, 0x0000 }, /* R3825 - ISRC 1 CTRL 2 */ + { 0x00000EF2, 0x0000 }, /* R3826 - ISRC 1 CTRL 3 */ + { 0x00000EF3, 0x0000 }, /* R3827 - ISRC 2 CTRL 1 */ + { 0x00000EF4, 0x0000 }, /* R3828 - ISRC 2 CTRL 2 */ + { 0x00000EF5, 0x0000 }, /* R3829 - ISRC 2 CTRL 3 */ + { 0x00000EF6, 0x0000 }, /* R3830 - ISRC 3 CTRL 1 */ + { 0x00000EF7, 0x0000 }, /* R3831 - ISRC 3 CTRL 2 */ + { 0x00000EF8, 0x0000 }, /* R3832 - ISRC 3 CTRL 3 */ + { 0x00001200, 0x0010 }, /* R4608 - DSP2 Control 1 */ + { 0x00001300, 0x0010 }, /* R4864 - DSP3 Control 1 */ +}; + +static bool cs47l24_is_adsp_memory(unsigned int reg) +{ + switch (reg) { + case 0x200000 ... 0x205fff: /* DSP2 PM */ + case 0x280000 ... 0x281fff: /* DSP2 ZM */ + case 0x290000 ... 0x2a7fff: /* DSP2 XM */ + case 0x2a8000 ... 0x2b3fff: /* DSP2 YM */ + case 0x300000 ... 0x308fff: /* DSP3 PM */ + case 0x380000 ... 0x381fff: /* DSP3 ZM */ + case 0x390000 ... 0x3a7fff: /* DSP3 XM */ + case 0x3a8000 ... 0x3b3fff: /* DSP3 YM */ + return true; + default: + return false; + } +} + +static bool cs47l24_readable_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case ARIZONA_SOFTWARE_RESET: + case ARIZONA_DEVICE_REVISION: + case ARIZONA_CTRL_IF_SPI_CFG_1: + case ARIZONA_WRITE_SEQUENCER_CTRL_0: + case ARIZONA_WRITE_SEQUENCER_CTRL_1: + case ARIZONA_WRITE_SEQUENCER_CTRL_2: + case ARIZONA_TONE_GENERATOR_1: + case ARIZONA_TONE_GENERATOR_2: + case ARIZONA_TONE_GENERATOR_3: + case ARIZONA_TONE_GENERATOR_4: + case ARIZONA_TONE_GENERATOR_5: + case ARIZONA_PWM_DRIVE_1: + case ARIZONA_PWM_DRIVE_2: + case ARIZONA_PWM_DRIVE_3: + case ARIZONA_SEQUENCE_CONTROL: + case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_1: + case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_2: + case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_3: + case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_4: + case ARIZONA_COMFORT_NOISE_GENERATOR: + case ARIZONA_HAPTICS_CONTROL_1: + case ARIZONA_HAPTICS_CONTROL_2: + case ARIZONA_HAPTICS_PHASE_1_INTENSITY: + case ARIZONA_HAPTICS_PHASE_1_DURATION: + case ARIZONA_HAPTICS_PHASE_2_INTENSITY: + case ARIZONA_HAPTICS_PHASE_2_DURATION: + case ARIZONA_HAPTICS_PHASE_3_INTENSITY: + case ARIZONA_HAPTICS_PHASE_3_DURATION: + case ARIZONA_HAPTICS_STATUS: + case ARIZONA_CLOCK_32K_1: + case ARIZONA_SYSTEM_CLOCK_1: + case ARIZONA_SAMPLE_RATE_1: + case ARIZONA_SAMPLE_RATE_2: + case ARIZONA_SAMPLE_RATE_3: + case ARIZONA_SAMPLE_RATE_1_STATUS: + case ARIZONA_SAMPLE_RATE_2_STATUS: + case ARIZONA_SAMPLE_RATE_3_STATUS: + case ARIZONA_ASYNC_CLOCK_1: + case ARIZONA_ASYNC_SAMPLE_RATE_1: + case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS: + case ARIZONA_ASYNC_SAMPLE_RATE_2: + case ARIZONA_ASYNC_SAMPLE_RATE_2_STATUS: + case ARIZONA_OUTPUT_SYSTEM_CLOCK: + case ARIZONA_OUTPUT_ASYNC_CLOCK: + case ARIZONA_RATE_ESTIMATOR_1: + case ARIZONA_RATE_ESTIMATOR_2: + case ARIZONA_RATE_ESTIMATOR_3: + case ARIZONA_RATE_ESTIMATOR_4: + case ARIZONA_RATE_ESTIMATOR_5: + case ARIZONA_FLL1_CONTROL_1: + case ARIZONA_FLL1_CONTROL_2: + case ARIZONA_FLL1_CONTROL_3: + case ARIZONA_FLL1_CONTROL_4: + case ARIZONA_FLL1_CONTROL_5: + case ARIZONA_FLL1_CONTROL_6: + case ARIZONA_FLL1_CONTROL_7: + case ARIZONA_FLL1_LOOP_FILTER_TEST_1: + case ARIZONA_FLL1_NCO_TEST_0: + case ARIZONA_FLL1_SYNCHRONISER_1: + case ARIZONA_FLL1_SYNCHRONISER_2: + case ARIZONA_FLL1_SYNCHRONISER_3: + case ARIZONA_FLL1_SYNCHRONISER_4: + case ARIZONA_FLL1_SYNCHRONISER_5: + case ARIZONA_FLL1_SYNCHRONISER_6: + case ARIZONA_FLL1_SYNCHRONISER_7: + case ARIZONA_FLL1_SPREAD_SPECTRUM: + case ARIZONA_FLL1_GPIO_CLOCK: + case ARIZONA_FLL2_CONTROL_1: + case ARIZONA_FLL2_CONTROL_2: + case ARIZONA_FLL2_CONTROL_3: + case ARIZONA_FLL2_CONTROL_4: + case ARIZONA_FLL2_CONTROL_5: + case ARIZONA_FLL2_CONTROL_6: + case ARIZONA_FLL2_CONTROL_7: + case ARIZONA_FLL2_LOOP_FILTER_TEST_1: + case ARIZONA_FLL2_NCO_TEST_0: + case ARIZONA_FLL2_SYNCHRONISER_1: + case ARIZONA_FLL2_SYNCHRONISER_2: + case ARIZONA_FLL2_SYNCHRONISER_3: + case ARIZONA_FLL2_SYNCHRONISER_4: + case ARIZONA_FLL2_SYNCHRONISER_5: + case ARIZONA_FLL2_SYNCHRONISER_6: + case ARIZONA_FLL2_SYNCHRONISER_7: + case ARIZONA_FLL2_SPREAD_SPECTRUM: + case ARIZONA_FLL2_GPIO_CLOCK: + case ARIZONA_MIC_BIAS_CTRL_1: + case ARIZONA_MIC_BIAS_CTRL_2: + case ARIZONA_HP_CTRL_1L: + case ARIZONA_HP_CTRL_1R: + case ARIZONA_INPUT_ENABLES: + case ARIZONA_INPUT_ENABLES_STATUS: + case ARIZONA_INPUT_RATE: + case ARIZONA_INPUT_VOLUME_RAMP: + case ARIZONA_HPF_CONTROL: + case ARIZONA_IN1L_CONTROL: + case ARIZONA_ADC_DIGITAL_VOLUME_1L: + case ARIZONA_DMIC1L_CONTROL: + case ARIZONA_IN1R_CONTROL: + case ARIZONA_ADC_DIGITAL_VOLUME_1R: + case ARIZONA_DMIC1R_CONTROL: + case ARIZONA_IN2L_CONTROL: + case ARIZONA_ADC_DIGITAL_VOLUME_2L: + case ARIZONA_DMIC2L_CONTROL: + case ARIZONA_IN2R_CONTROL: + case ARIZONA_ADC_DIGITAL_VOLUME_2R: + case ARIZONA_DMIC2R_CONTROL: + case ARIZONA_OUTPUT_ENABLES_1: + case ARIZONA_OUTPUT_STATUS_1: + case ARIZONA_RAW_OUTPUT_STATUS_1: + case ARIZONA_OUTPUT_RATE_1: + case ARIZONA_OUTPUT_VOLUME_RAMP: + case ARIZONA_OUTPUT_PATH_CONFIG_1L: + case ARIZONA_DAC_DIGITAL_VOLUME_1L: + case ARIZONA_DAC_VOLUME_LIMIT_1L: + case ARIZONA_NOISE_GATE_SELECT_1L: + case ARIZONA_DAC_DIGITAL_VOLUME_1R: + case ARIZONA_DAC_VOLUME_LIMIT_1R: + case ARIZONA_NOISE_GATE_SELECT_1R: + case ARIZONA_DAC_DIGITAL_VOLUME_4L: + case ARIZONA_OUT_VOLUME_4L: + case ARIZONA_NOISE_GATE_SELECT_4L: + case ARIZONA_DAC_AEC_CONTROL_1: + case ARIZONA_NOISE_GATE_CONTROL: + case ARIZONA_HP1_SHORT_CIRCUIT_CTRL: + case ARIZONA_AIF1_BCLK_CTRL: + case ARIZONA_AIF1_TX_PIN_CTRL: + case ARIZONA_AIF1_RX_PIN_CTRL: + case ARIZONA_AIF1_RATE_CTRL: + case ARIZONA_AIF1_FORMAT: + case ARIZONA_AIF1_RX_BCLK_RATE: + case ARIZONA_AIF1_FRAME_CTRL_1: + case ARIZONA_AIF1_FRAME_CTRL_2: + case ARIZONA_AIF1_FRAME_CTRL_3: + case ARIZONA_AIF1_FRAME_CTRL_4: + case ARIZONA_AIF1_FRAME_CTRL_5: + case ARIZONA_AIF1_FRAME_CTRL_6: + case ARIZONA_AIF1_FRAME_CTRL_7: + case ARIZONA_AIF1_FRAME_CTRL_8: + case ARIZONA_AIF1_FRAME_CTRL_9: + case ARIZONA_AIF1_FRAME_CTRL_10: + case ARIZONA_AIF1_FRAME_CTRL_11: + case ARIZONA_AIF1_FRAME_CTRL_12: + case ARIZONA_AIF1_FRAME_CTRL_13: + case ARIZONA_AIF1_FRAME_CTRL_14: + case ARIZONA_AIF1_FRAME_CTRL_15: + case ARIZONA_AIF1_FRAME_CTRL_16: + case ARIZONA_AIF1_FRAME_CTRL_17: + case ARIZONA_AIF1_FRAME_CTRL_18: + case ARIZONA_AIF1_TX_ENABLES: + case ARIZONA_AIF1_RX_ENABLES: + case ARIZONA_AIF2_BCLK_CTRL: + case ARIZONA_AIF2_TX_PIN_CTRL: + case ARIZONA_AIF2_RX_PIN_CTRL: + case ARIZONA_AIF2_RATE_CTRL: + case ARIZONA_AIF2_FORMAT: + case ARIZONA_AIF2_RX_BCLK_RATE: + case ARIZONA_AIF2_FRAME_CTRL_1: + case ARIZONA_AIF2_FRAME_CTRL_2: + case ARIZONA_AIF2_FRAME_CTRL_3: + case ARIZONA_AIF2_FRAME_CTRL_4: + case ARIZONA_AIF2_FRAME_CTRL_5: + case ARIZONA_AIF2_FRAME_CTRL_6: + case ARIZONA_AIF2_FRAME_CTRL_7: + case ARIZONA_AIF2_FRAME_CTRL_8: + case ARIZONA_AIF2_FRAME_CTRL_11: + case ARIZONA_AIF2_FRAME_CTRL_12: + case ARIZONA_AIF2_FRAME_CTRL_13: + case ARIZONA_AIF2_FRAME_CTRL_14: + case ARIZONA_AIF2_FRAME_CTRL_15: + case ARIZONA_AIF2_FRAME_CTRL_16: + case ARIZONA_AIF2_TX_ENABLES: + case ARIZONA_AIF2_RX_ENABLES: + case ARIZONA_AIF3_BCLK_CTRL: + case ARIZONA_AIF3_TX_PIN_CTRL: + case ARIZONA_AIF3_RX_PIN_CTRL: + case ARIZONA_AIF3_RATE_CTRL: + case ARIZONA_AIF3_FORMAT: + case ARIZONA_AIF3_RX_BCLK_RATE: + case ARIZONA_AIF3_FRAME_CTRL_1: + case ARIZONA_AIF3_FRAME_CTRL_2: + case ARIZONA_AIF3_FRAME_CTRL_3: + case ARIZONA_AIF3_FRAME_CTRL_4: + case ARIZONA_AIF3_FRAME_CTRL_11: + case ARIZONA_AIF3_FRAME_CTRL_12: + case ARIZONA_AIF3_TX_ENABLES: + case ARIZONA_AIF3_RX_ENABLES: + case ARIZONA_PWM1MIX_INPUT_1_SOURCE: + case ARIZONA_PWM1MIX_INPUT_1_VOLUME: + case ARIZONA_PWM1MIX_INPUT_2_SOURCE: + case ARIZONA_PWM1MIX_INPUT_2_VOLUME: + case ARIZONA_PWM1MIX_INPUT_3_SOURCE: + case ARIZONA_PWM1MIX_INPUT_3_VOLUME: + case ARIZONA_PWM1MIX_INPUT_4_SOURCE: + case ARIZONA_PWM1MIX_INPUT_4_VOLUME: + case ARIZONA_PWM2MIX_INPUT_1_SOURCE: + case ARIZONA_PWM2MIX_INPUT_1_VOLUME: + case ARIZONA_PWM2MIX_INPUT_2_SOURCE: + case ARIZONA_PWM2MIX_INPUT_2_VOLUME: + case ARIZONA_PWM2MIX_INPUT_3_SOURCE: + case ARIZONA_PWM2MIX_INPUT_3_VOLUME: + case ARIZONA_PWM2MIX_INPUT_4_SOURCE: + case ARIZONA_PWM2MIX_INPUT_4_VOLUME: + case ARIZONA_OUT1LMIX_INPUT_1_SOURCE: + case ARIZONA_OUT1LMIX_INPUT_1_VOLUME: + case ARIZONA_OUT1LMIX_INPUT_2_SOURCE: + case ARIZONA_OUT1LMIX_INPUT_2_VOLUME: + case ARIZONA_OUT1LMIX_INPUT_3_SOURCE: + case ARIZONA_OUT1LMIX_INPUT_3_VOLUME: + case ARIZONA_OUT1LMIX_INPUT_4_SOURCE: + case ARIZONA_OUT1LMIX_INPUT_4_VOLUME: + case ARIZONA_OUT1RMIX_INPUT_1_SOURCE: + case ARIZONA_OUT1RMIX_INPUT_1_VOLUME: + case ARIZONA_OUT1RMIX_INPUT_2_SOURCE: + case ARIZONA_OUT1RMIX_INPUT_2_VOLUME: + case ARIZONA_OUT1RMIX_INPUT_3_SOURCE: + case ARIZONA_OUT1RMIX_INPUT_3_VOLUME: + case ARIZONA_OUT1RMIX_INPUT_4_SOURCE: + case ARIZONA_OUT1RMIX_INPUT_4_VOLUME: + case ARIZONA_OUT4LMIX_INPUT_1_SOURCE: + case ARIZONA_OUT4LMIX_INPUT_1_VOLUME: + case ARIZONA_OUT4LMIX_INPUT_2_SOURCE: + case ARIZONA_OUT4LMIX_INPUT_2_VOLUME: + case ARIZONA_OUT4LMIX_INPUT_3_SOURCE: + case ARIZONA_OUT4LMIX_INPUT_3_VOLUME: + case ARIZONA_OUT4LMIX_INPUT_4_SOURCE: + case ARIZONA_OUT4LMIX_INPUT_4_VOLUME: + case ARIZONA_AIF1TX1MIX_INPUT_1_SOURCE: + case ARIZONA_AIF1TX1MIX_INPUT_1_VOLUME: + case ARIZONA_AIF1TX1MIX_INPUT_2_SOURCE: + case ARIZONA_AIF1TX1MIX_INPUT_2_VOLUME: + case ARIZONA_AIF1TX1MIX_INPUT_3_SOURCE: + case ARIZONA_AIF1TX1MIX_INPUT_3_VOLUME: + case ARIZONA_AIF1TX1MIX_INPUT_4_SOURCE: + case ARIZONA_AIF1TX1MIX_INPUT_4_VOLUME: + case ARIZONA_AIF1TX2MIX_INPUT_1_SOURCE: + case ARIZONA_AIF1TX2MIX_INPUT_1_VOLUME: + case ARIZONA_AIF1TX2MIX_INPUT_2_SOURCE: + case ARIZONA_AIF1TX2MIX_INPUT_2_VOLUME: + case ARIZONA_AIF1TX2MIX_INPUT_3_SOURCE: + case ARIZONA_AIF1TX2MIX_INPUT_3_VOLUME: + case ARIZONA_AIF1TX2MIX_INPUT_4_SOURCE: + case ARIZONA_AIF1TX2MIX_INPUT_4_VOLUME: + case ARIZONA_AIF1TX3MIX_INPUT_1_SOURCE: + case ARIZONA_AIF1TX3MIX_INPUT_1_VOLUME: + case ARIZONA_AIF1TX3MIX_INPUT_2_SOURCE: + case ARIZONA_AIF1TX3MIX_INPUT_2_VOLUME: + case ARIZONA_AIF1TX3MIX_INPUT_3_SOURCE: + case ARIZONA_AIF1TX3MIX_INPUT_3_VOLUME: + case ARIZONA_AIF1TX3MIX_INPUT_4_SOURCE: + case ARIZONA_AIF1TX3MIX_INPUT_4_VOLUME: + case ARIZONA_AIF1TX4MIX_INPUT_1_SOURCE: + case ARIZONA_AIF1TX4MIX_INPUT_1_VOLUME: + case ARIZONA_AIF1TX4MIX_INPUT_2_SOURCE: + case ARIZONA_AIF1TX4MIX_INPUT_2_VOLUME: + case ARIZONA_AIF1TX4MIX_INPUT_3_SOURCE: + case ARIZONA_AIF1TX4MIX_INPUT_3_VOLUME: + case ARIZONA_AIF1TX4MIX_INPUT_4_SOURCE: + case ARIZONA_AIF1TX4MIX_INPUT_4_VOLUME: + case ARIZONA_AIF1TX5MIX_INPUT_1_SOURCE: + case ARIZONA_AIF1TX5MIX_INPUT_1_VOLUME: + case ARIZONA_AIF1TX5MIX_INPUT_2_SOURCE: + case ARIZONA_AIF1TX5MIX_INPUT_2_VOLUME: + case ARIZONA_AIF1TX5MIX_INPUT_3_SOURCE: + case ARIZONA_AIF1TX5MIX_INPUT_3_VOLUME: + case ARIZONA_AIF1TX5MIX_INPUT_4_SOURCE: + case ARIZONA_AIF1TX5MIX_INPUT_4_VOLUME: + case ARIZONA_AIF1TX6MIX_INPUT_1_SOURCE: + case ARIZONA_AIF1TX6MIX_INPUT_1_VOLUME: + case ARIZONA_AIF1TX6MIX_INPUT_2_SOURCE: + case ARIZONA_AIF1TX6MIX_INPUT_2_VOLUME: + case ARIZONA_AIF1TX6MIX_INPUT_3_SOURCE: + case ARIZONA_AIF1TX6MIX_INPUT_3_VOLUME: + case ARIZONA_AIF1TX6MIX_INPUT_4_SOURCE: + case ARIZONA_AIF1TX6MIX_INPUT_4_VOLUME: + case ARIZONA_AIF1TX7MIX_INPUT_1_SOURCE: + case ARIZONA_AIF1TX7MIX_INPUT_1_VOLUME: + case ARIZONA_AIF1TX7MIX_INPUT_2_SOURCE: + case ARIZONA_AIF1TX7MIX_INPUT_2_VOLUME: + case ARIZONA_AIF1TX7MIX_INPUT_3_SOURCE: + case ARIZONA_AIF1TX7MIX_INPUT_3_VOLUME: + case ARIZONA_AIF1TX7MIX_INPUT_4_SOURCE: + case ARIZONA_AIF1TX7MIX_INPUT_4_VOLUME: + case ARIZONA_AIF1TX8MIX_INPUT_1_SOURCE: + case ARIZONA_AIF1TX8MIX_INPUT_1_VOLUME: + case ARIZONA_AIF1TX8MIX_INPUT_2_SOURCE: + case ARIZONA_AIF1TX8MIX_INPUT_2_VOLUME: + case ARIZONA_AIF1TX8MIX_INPUT_3_SOURCE: + case ARIZONA_AIF1TX8MIX_INPUT_3_VOLUME: + case ARIZONA_AIF1TX8MIX_INPUT_4_SOURCE: + case ARIZONA_AIF1TX8MIX_INPUT_4_VOLUME: + case ARIZONA_AIF2TX1MIX_INPUT_1_SOURCE: + case ARIZONA_AIF2TX1MIX_INPUT_1_VOLUME: + case ARIZONA_AIF2TX1MIX_INPUT_2_SOURCE: + case ARIZONA_AIF2TX1MIX_INPUT_2_VOLUME: + case ARIZONA_AIF2TX1MIX_INPUT_3_SOURCE: + case ARIZONA_AIF2TX1MIX_INPUT_3_VOLUME: + case ARIZONA_AIF2TX1MIX_INPUT_4_SOURCE: + case ARIZONA_AIF2TX1MIX_INPUT_4_VOLUME: + case ARIZONA_AIF2TX2MIX_INPUT_1_SOURCE: + case ARIZONA_AIF2TX2MIX_INPUT_1_VOLUME: + case ARIZONA_AIF2TX2MIX_INPUT_2_SOURCE: + case ARIZONA_AIF2TX2MIX_INPUT_2_VOLUME: + case ARIZONA_AIF2TX2MIX_INPUT_3_SOURCE: + case ARIZONA_AIF2TX2MIX_INPUT_3_VOLUME: + case ARIZONA_AIF2TX2MIX_INPUT_4_SOURCE: + case ARIZONA_AIF2TX2MIX_INPUT_4_VOLUME: + case ARIZONA_AIF2TX3MIX_INPUT_1_SOURCE: + case ARIZONA_AIF2TX3MIX_INPUT_1_VOLUME: + case ARIZONA_AIF2TX3MIX_INPUT_2_SOURCE: + case ARIZONA_AIF2TX3MIX_INPUT_2_VOLUME: + case ARIZONA_AIF2TX3MIX_INPUT_3_SOURCE: + case ARIZONA_AIF2TX3MIX_INPUT_3_VOLUME: + case ARIZONA_AIF2TX3MIX_INPUT_4_SOURCE: + case ARIZONA_AIF2TX3MIX_INPUT_4_VOLUME: + case ARIZONA_AIF2TX4MIX_INPUT_1_SOURCE: + case ARIZONA_AIF2TX4MIX_INPUT_1_VOLUME: + case ARIZONA_AIF2TX4MIX_INPUT_2_SOURCE: + case ARIZONA_AIF2TX4MIX_INPUT_2_VOLUME: + case ARIZONA_AIF2TX4MIX_INPUT_3_SOURCE: + case ARIZONA_AIF2TX4MIX_INPUT_3_VOLUME: + case ARIZONA_AIF2TX4MIX_INPUT_4_SOURCE: + case ARIZONA_AIF2TX4MIX_INPUT_4_VOLUME: + case ARIZONA_AIF2TX5MIX_INPUT_1_SOURCE: + case ARIZONA_AIF2TX5MIX_INPUT_1_VOLUME: + case ARIZONA_AIF2TX5MIX_INPUT_2_SOURCE: + case ARIZONA_AIF2TX5MIX_INPUT_2_VOLUME: + case ARIZONA_AIF2TX5MIX_INPUT_3_SOURCE: + case ARIZONA_AIF2TX5MIX_INPUT_3_VOLUME: + case ARIZONA_AIF2TX5MIX_INPUT_4_SOURCE: + case ARIZONA_AIF2TX5MIX_INPUT_4_VOLUME: + case ARIZONA_AIF2TX6MIX_INPUT_1_SOURCE: + case ARIZONA_AIF2TX6MIX_INPUT_1_VOLUME: + case ARIZONA_AIF2TX6MIX_INPUT_2_SOURCE: + case ARIZONA_AIF2TX6MIX_INPUT_2_VOLUME: + case ARIZONA_AIF2TX6MIX_INPUT_3_SOURCE: + case ARIZONA_AIF2TX6MIX_INPUT_3_VOLUME: + case ARIZONA_AIF2TX6MIX_INPUT_4_SOURCE: + case ARIZONA_AIF2TX6MIX_INPUT_4_VOLUME: + case ARIZONA_AIF3TX1MIX_INPUT_1_SOURCE: + case ARIZONA_AIF3TX1MIX_INPUT_1_VOLUME: + case ARIZONA_AIF3TX1MIX_INPUT_2_SOURCE: + case ARIZONA_AIF3TX1MIX_INPUT_2_VOLUME: + case ARIZONA_AIF3TX1MIX_INPUT_3_SOURCE: + case ARIZONA_AIF3TX1MIX_INPUT_3_VOLUME: + case ARIZONA_AIF3TX1MIX_INPUT_4_SOURCE: + case ARIZONA_AIF3TX1MIX_INPUT_4_VOLUME: + case ARIZONA_AIF3TX2MIX_INPUT_1_SOURCE: + case ARIZONA_AIF3TX2MIX_INPUT_1_VOLUME: + case ARIZONA_AIF3TX2MIX_INPUT_2_SOURCE: + case ARIZONA_AIF3TX2MIX_INPUT_2_VOLUME: + case ARIZONA_AIF3TX2MIX_INPUT_3_SOURCE: + case ARIZONA_AIF3TX2MIX_INPUT_3_VOLUME: + case ARIZONA_AIF3TX2MIX_INPUT_4_SOURCE: + case ARIZONA_AIF3TX2MIX_INPUT_4_VOLUME: + case ARIZONA_EQ1MIX_INPUT_1_SOURCE: + case ARIZONA_EQ1MIX_INPUT_1_VOLUME: + case ARIZONA_EQ1MIX_INPUT_2_SOURCE: + case ARIZONA_EQ1MIX_INPUT_2_VOLUME: + case ARIZONA_EQ1MIX_INPUT_3_SOURCE: + case ARIZONA_EQ1MIX_INPUT_3_VOLUME: + case ARIZONA_EQ1MIX_INPUT_4_SOURCE: + case ARIZONA_EQ1MIX_INPUT_4_VOLUME: + case ARIZONA_EQ2MIX_INPUT_1_SOURCE: + case ARIZONA_EQ2MIX_INPUT_1_VOLUME: + case ARIZONA_EQ2MIX_INPUT_2_SOURCE: + case ARIZONA_EQ2MIX_INPUT_2_VOLUME: + case ARIZONA_EQ2MIX_INPUT_3_SOURCE: + case ARIZONA_EQ2MIX_INPUT_3_VOLUME: + case ARIZONA_EQ2MIX_INPUT_4_SOURCE: + case ARIZONA_EQ2MIX_INPUT_4_VOLUME: + case ARIZONA_DRC1LMIX_INPUT_1_SOURCE: + case ARIZONA_DRC1LMIX_INPUT_1_VOLUME: + case ARIZONA_DRC1LMIX_INPUT_2_SOURCE: + case ARIZONA_DRC1LMIX_INPUT_2_VOLUME: + case ARIZONA_DRC1LMIX_INPUT_3_SOURCE: + case ARIZONA_DRC1LMIX_INPUT_3_VOLUME: + case ARIZONA_DRC1LMIX_INPUT_4_SOURCE: + case ARIZONA_DRC1LMIX_INPUT_4_VOLUME: + case ARIZONA_DRC1RMIX_INPUT_1_SOURCE: + case ARIZONA_DRC1RMIX_INPUT_1_VOLUME: + case ARIZONA_DRC1RMIX_INPUT_2_SOURCE: + case ARIZONA_DRC1RMIX_INPUT_2_VOLUME: + case ARIZONA_DRC1RMIX_INPUT_3_SOURCE: + case ARIZONA_DRC1RMIX_INPUT_3_VOLUME: + case ARIZONA_DRC1RMIX_INPUT_4_SOURCE: + case ARIZONA_DRC1RMIX_INPUT_4_VOLUME: + case ARIZONA_DRC2LMIX_INPUT_1_SOURCE: + case ARIZONA_DRC2LMIX_INPUT_1_VOLUME: + case ARIZONA_DRC2LMIX_INPUT_2_SOURCE: + case ARIZONA_DRC2LMIX_INPUT_2_VOLUME: + case ARIZONA_DRC2LMIX_INPUT_3_SOURCE: + case ARIZONA_DRC2LMIX_INPUT_3_VOLUME: + case ARIZONA_DRC2LMIX_INPUT_4_SOURCE: + case ARIZONA_DRC2LMIX_INPUT_4_VOLUME: + case ARIZONA_DRC2RMIX_INPUT_1_SOURCE: + case ARIZONA_DRC2RMIX_INPUT_1_VOLUME: + case ARIZONA_DRC2RMIX_INPUT_2_SOURCE: + case ARIZONA_DRC2RMIX_INPUT_2_VOLUME: + case ARIZONA_DRC2RMIX_INPUT_3_SOURCE: + case ARIZONA_DRC2RMIX_INPUT_3_VOLUME: + case ARIZONA_DRC2RMIX_INPUT_4_SOURCE: + case ARIZONA_DRC2RMIX_INPUT_4_VOLUME: + case ARIZONA_HPLP1MIX_INPUT_1_SOURCE: + case ARIZONA_HPLP1MIX_INPUT_1_VOLUME: + case ARIZONA_HPLP1MIX_INPUT_2_SOURCE: + case ARIZONA_HPLP1MIX_INPUT_2_VOLUME: + case ARIZONA_HPLP1MIX_INPUT_3_SOURCE: + case ARIZONA_HPLP1MIX_INPUT_3_VOLUME: + case ARIZONA_HPLP1MIX_INPUT_4_SOURCE: + case ARIZONA_HPLP1MIX_INPUT_4_VOLUME: + case ARIZONA_HPLP2MIX_INPUT_1_SOURCE: + case ARIZONA_HPLP2MIX_INPUT_1_VOLUME: + case ARIZONA_HPLP2MIX_INPUT_2_SOURCE: + case ARIZONA_HPLP2MIX_INPUT_2_VOLUME: + case ARIZONA_HPLP2MIX_INPUT_3_SOURCE: + case ARIZONA_HPLP2MIX_INPUT_3_VOLUME: + case ARIZONA_HPLP2MIX_INPUT_4_SOURCE: + case ARIZONA_HPLP2MIX_INPUT_4_VOLUME: + case ARIZONA_HPLP3MIX_INPUT_1_SOURCE: + case ARIZONA_HPLP3MIX_INPUT_1_VOLUME: + case ARIZONA_HPLP3MIX_INPUT_2_SOURCE: + case ARIZONA_HPLP3MIX_INPUT_2_VOLUME: + case ARIZONA_HPLP3MIX_INPUT_3_SOURCE: + case ARIZONA_HPLP3MIX_INPUT_3_VOLUME: + case ARIZONA_HPLP3MIX_INPUT_4_SOURCE: + case ARIZONA_HPLP3MIX_INPUT_4_VOLUME: + case ARIZONA_HPLP4MIX_INPUT_1_SOURCE: + case ARIZONA_HPLP4MIX_INPUT_1_VOLUME: + case ARIZONA_HPLP4MIX_INPUT_2_SOURCE: + case ARIZONA_HPLP4MIX_INPUT_2_VOLUME: + case ARIZONA_HPLP4MIX_INPUT_3_SOURCE: + case ARIZONA_HPLP4MIX_INPUT_3_VOLUME: + case ARIZONA_HPLP4MIX_INPUT_4_SOURCE: + case ARIZONA_HPLP4MIX_INPUT_4_VOLUME: + case ARIZONA_DSP2LMIX_INPUT_1_SOURCE: + case ARIZONA_DSP2LMIX_INPUT_1_VOLUME: + case ARIZONA_DSP2LMIX_INPUT_2_SOURCE: + case ARIZONA_DSP2LMIX_INPUT_2_VOLUME: + case ARIZONA_DSP2LMIX_INPUT_3_SOURCE: + case ARIZONA_DSP2LMIX_INPUT_3_VOLUME: + case ARIZONA_DSP2LMIX_INPUT_4_SOURCE: + case ARIZONA_DSP2LMIX_INPUT_4_VOLUME: + case ARIZONA_DSP2RMIX_INPUT_1_SOURCE: + case ARIZONA_DSP2RMIX_INPUT_1_VOLUME: + case ARIZONA_DSP2RMIX_INPUT_2_SOURCE: + case ARIZONA_DSP2RMIX_INPUT_2_VOLUME: + case ARIZONA_DSP2RMIX_INPUT_3_SOURCE: + case ARIZONA_DSP2RMIX_INPUT_3_VOLUME: + case ARIZONA_DSP2RMIX_INPUT_4_SOURCE: + case ARIZONA_DSP2RMIX_INPUT_4_VOLUME: + case ARIZONA_DSP2AUX1MIX_INPUT_1_SOURCE: + case ARIZONA_DSP2AUX2MIX_INPUT_1_SOURCE: + case ARIZONA_DSP2AUX3MIX_INPUT_1_SOURCE: + case ARIZONA_DSP2AUX4MIX_INPUT_1_SOURCE: + case ARIZONA_DSP2AUX5MIX_INPUT_1_SOURCE: + case ARIZONA_DSP2AUX6MIX_INPUT_1_SOURCE: + case ARIZONA_DSP3LMIX_INPUT_1_SOURCE: + case ARIZONA_DSP3LMIX_INPUT_1_VOLUME: + case ARIZONA_DSP3LMIX_INPUT_2_SOURCE: + case ARIZONA_DSP3LMIX_INPUT_2_VOLUME: + case ARIZONA_DSP3LMIX_INPUT_3_SOURCE: + case ARIZONA_DSP3LMIX_INPUT_3_VOLUME: + case ARIZONA_DSP3LMIX_INPUT_4_SOURCE: + case ARIZONA_DSP3LMIX_INPUT_4_VOLUME: + case ARIZONA_DSP3RMIX_INPUT_1_SOURCE: + case ARIZONA_DSP3RMIX_INPUT_1_VOLUME: + case ARIZONA_DSP3RMIX_INPUT_2_SOURCE: + case ARIZONA_DSP3RMIX_INPUT_2_VOLUME: + case ARIZONA_DSP3RMIX_INPUT_3_SOURCE: + case ARIZONA_DSP3RMIX_INPUT_3_VOLUME: + case ARIZONA_DSP3RMIX_INPUT_4_SOURCE: + case ARIZONA_DSP3RMIX_INPUT_4_VOLUME: + case ARIZONA_DSP3AUX1MIX_INPUT_1_SOURCE: + case ARIZONA_DSP3AUX2MIX_INPUT_1_SOURCE: + case ARIZONA_DSP3AUX3MIX_INPUT_1_SOURCE: + case ARIZONA_DSP3AUX4MIX_INPUT_1_SOURCE: + case ARIZONA_DSP3AUX5MIX_INPUT_1_SOURCE: + case ARIZONA_DSP3AUX6MIX_INPUT_1_SOURCE: + case ARIZONA_ASRC1LMIX_INPUT_1_SOURCE: + case ARIZONA_ASRC1RMIX_INPUT_1_SOURCE: + case ARIZONA_ASRC2LMIX_INPUT_1_SOURCE: + case ARIZONA_ASRC2RMIX_INPUT_1_SOURCE: + case ARIZONA_ISRC1DEC1MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC1DEC2MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC1DEC3MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC1DEC4MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC1INT1MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC1INT2MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC1INT3MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC1INT4MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC2DEC1MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC2DEC2MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC2DEC3MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC2DEC4MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC2INT1MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC2INT2MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC2INT3MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC2INT4MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC3DEC1MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC3DEC2MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC3DEC3MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC3DEC4MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC3INT1MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC3INT2MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC3INT3MIX_INPUT_1_SOURCE: + case ARIZONA_ISRC3INT4MIX_INPUT_1_SOURCE: + case ARIZONA_GPIO1_CTRL: + case ARIZONA_GPIO2_CTRL: + case ARIZONA_IRQ_CTRL_1: + case ARIZONA_GPIO_DEBOUNCE_CONFIG: + case ARIZONA_MISC_PAD_CTRL_1: + case ARIZONA_MISC_PAD_CTRL_2: + case ARIZONA_MISC_PAD_CTRL_3: + case ARIZONA_MISC_PAD_CTRL_4: + case ARIZONA_MISC_PAD_CTRL_5: + case ARIZONA_MISC_PAD_CTRL_6: + case ARIZONA_MISC_PAD_CTRL_7: + case ARIZONA_MISC_PAD_CTRL_9: + case ARIZONA_MISC_PAD_CTRL_10: + case ARIZONA_MISC_PAD_CTRL_11: + case ARIZONA_MISC_PAD_CTRL_12: + case ARIZONA_MISC_PAD_CTRL_13: + case ARIZONA_MISC_PAD_CTRL_14: + case ARIZONA_MISC_PAD_CTRL_16: + case ARIZONA_INTERRUPT_STATUS_1: + case ARIZONA_INTERRUPT_STATUS_2: + case ARIZONA_INTERRUPT_STATUS_3: + case ARIZONA_INTERRUPT_STATUS_4: + case ARIZONA_INTERRUPT_STATUS_5: + case ARIZONA_INTERRUPT_STATUS_6: + case ARIZONA_INTERRUPT_STATUS_1_MASK: + case ARIZONA_INTERRUPT_STATUS_2_MASK: + case ARIZONA_INTERRUPT_STATUS_3_MASK: + case ARIZONA_INTERRUPT_STATUS_4_MASK: + case ARIZONA_INTERRUPT_STATUS_5_MASK: + case ARIZONA_INTERRUPT_STATUS_6_MASK: + case ARIZONA_INTERRUPT_CONTROL: + case ARIZONA_IRQ2_STATUS_1: + case ARIZONA_IRQ2_STATUS_2: + case ARIZONA_IRQ2_STATUS_3: + case ARIZONA_IRQ2_STATUS_4: + case ARIZONA_IRQ2_STATUS_5: + case ARIZONA_IRQ2_STATUS_6: + case ARIZONA_IRQ2_STATUS_1_MASK: + case ARIZONA_IRQ2_STATUS_2_MASK: + case ARIZONA_IRQ2_STATUS_3_MASK: + case ARIZONA_IRQ2_STATUS_4_MASK: + case ARIZONA_IRQ2_STATUS_5_MASK: + case ARIZONA_IRQ2_STATUS_6_MASK: + case ARIZONA_IRQ2_CONTROL: + case ARIZONA_INTERRUPT_RAW_STATUS_2: + case ARIZONA_INTERRUPT_RAW_STATUS_3: + case ARIZONA_INTERRUPT_RAW_STATUS_4: + case ARIZONA_INTERRUPT_RAW_STATUS_5: + case ARIZONA_INTERRUPT_RAW_STATUS_6: + case ARIZONA_INTERRUPT_RAW_STATUS_7: + case ARIZONA_INTERRUPT_RAW_STATUS_8: + case ARIZONA_INTERRUPT_RAW_STATUS_9: + case ARIZONA_IRQ_PIN_STATUS: + case ARIZONA_FX_CTRL1: + case ARIZONA_FX_CTRL2: + case ARIZONA_EQ1_1: + case ARIZONA_EQ1_2: + case ARIZONA_EQ1_3: + case ARIZONA_EQ1_4: + case ARIZONA_EQ1_5: + case ARIZONA_EQ1_6: + case ARIZONA_EQ1_7: + case ARIZONA_EQ1_8: + case ARIZONA_EQ1_9: + case ARIZONA_EQ1_10: + case ARIZONA_EQ1_11: + case ARIZONA_EQ1_12: + case ARIZONA_EQ1_13: + case ARIZONA_EQ1_14: + case ARIZONA_EQ1_15: + case ARIZONA_EQ1_16: + case ARIZONA_EQ1_17: + case ARIZONA_EQ1_18: + case ARIZONA_EQ1_19: + case ARIZONA_EQ1_20: + case ARIZONA_EQ1_21: + case ARIZONA_EQ2_1: + case ARIZONA_EQ2_2: + case ARIZONA_EQ2_3: + case ARIZONA_EQ2_4: + case ARIZONA_EQ2_5: + case ARIZONA_EQ2_6: + case ARIZONA_EQ2_7: + case ARIZONA_EQ2_8: + case ARIZONA_EQ2_9: + case ARIZONA_EQ2_10: + case ARIZONA_EQ2_11: + case ARIZONA_EQ2_12: + case ARIZONA_EQ2_13: + case ARIZONA_EQ2_14: + case ARIZONA_EQ2_15: + case ARIZONA_EQ2_16: + case ARIZONA_EQ2_17: + case ARIZONA_EQ2_18: + case ARIZONA_EQ2_19: + case ARIZONA_EQ2_20: + case ARIZONA_EQ2_21: + case ARIZONA_DRC1_CTRL1: + case ARIZONA_DRC1_CTRL2: + case ARIZONA_DRC1_CTRL3: + case ARIZONA_DRC1_CTRL4: + case ARIZONA_DRC1_CTRL5: + case ARIZONA_DRC2_CTRL1: + case ARIZONA_DRC2_CTRL2: + case ARIZONA_DRC2_CTRL3: + case ARIZONA_DRC2_CTRL4: + case ARIZONA_DRC2_CTRL5: + case ARIZONA_HPLPF1_1: + case ARIZONA_HPLPF1_2: + case ARIZONA_HPLPF2_1: + case ARIZONA_HPLPF2_2: + case ARIZONA_HPLPF3_1: + case ARIZONA_HPLPF3_2: + case ARIZONA_HPLPF4_1: + case ARIZONA_HPLPF4_2: + case ARIZONA_ASRC_ENABLE: + case ARIZONA_ASRC_STATUS: + case ARIZONA_ASRC_RATE1: + case ARIZONA_ASRC_RATE2: + case ARIZONA_ISRC_1_CTRL_1: + case ARIZONA_ISRC_1_CTRL_2: + case ARIZONA_ISRC_1_CTRL_3: + case ARIZONA_ISRC_2_CTRL_1: + case ARIZONA_ISRC_2_CTRL_2: + case ARIZONA_ISRC_2_CTRL_3: + case ARIZONA_ISRC_3_CTRL_1: + case ARIZONA_ISRC_3_CTRL_2: + case ARIZONA_ISRC_3_CTRL_3: + case ARIZONA_DSP2_CONTROL_1: + case ARIZONA_DSP2_CLOCKING_1: + case ARIZONA_DSP2_STATUS_1: + case ARIZONA_DSP2_STATUS_2: + case ARIZONA_DSP2_STATUS_3: + case ARIZONA_DSP2_STATUS_4: + case ARIZONA_DSP2_WDMA_BUFFER_1: + case ARIZONA_DSP2_WDMA_BUFFER_2: + case ARIZONA_DSP2_WDMA_BUFFER_3: + case ARIZONA_DSP2_WDMA_BUFFER_4: + case ARIZONA_DSP2_WDMA_BUFFER_5: + case ARIZONA_DSP2_WDMA_BUFFER_6: + case ARIZONA_DSP2_WDMA_BUFFER_7: + case ARIZONA_DSP2_WDMA_BUFFER_8: + case ARIZONA_DSP2_RDMA_BUFFER_1: + case ARIZONA_DSP2_RDMA_BUFFER_2: + case ARIZONA_DSP2_RDMA_BUFFER_3: + case ARIZONA_DSP2_RDMA_BUFFER_4: + case ARIZONA_DSP2_RDMA_BUFFER_5: + case ARIZONA_DSP2_RDMA_BUFFER_6: + case ARIZONA_DSP2_WDMA_CONFIG_1: + case ARIZONA_DSP2_WDMA_CONFIG_2: + case ARIZONA_DSP2_WDMA_OFFSET_1: + case ARIZONA_DSP2_RDMA_CONFIG_1: + case ARIZONA_DSP2_RDMA_OFFSET_1: + case ARIZONA_DSP2_EXTERNAL_START_SELECT_1: + case ARIZONA_DSP2_SCRATCH_0: + case ARIZONA_DSP2_SCRATCH_1: + case ARIZONA_DSP2_SCRATCH_2: + case ARIZONA_DSP2_SCRATCH_3: + case ARIZONA_DSP3_CONTROL_1: + case ARIZONA_DSP3_CLOCKING_1: + case ARIZONA_DSP3_STATUS_1: + case ARIZONA_DSP3_STATUS_2: + case ARIZONA_DSP3_STATUS_3: + case ARIZONA_DSP3_STATUS_4: + case ARIZONA_DSP3_WDMA_BUFFER_1: + case ARIZONA_DSP3_WDMA_BUFFER_2: + case ARIZONA_DSP3_WDMA_BUFFER_3: + case ARIZONA_DSP3_WDMA_BUFFER_4: + case ARIZONA_DSP3_WDMA_BUFFER_5: + case ARIZONA_DSP3_WDMA_BUFFER_6: + case ARIZONA_DSP3_WDMA_BUFFER_7: + case ARIZONA_DSP3_WDMA_BUFFER_8: + case ARIZONA_DSP3_RDMA_BUFFER_1: + case ARIZONA_DSP3_RDMA_BUFFER_2: + case ARIZONA_DSP3_RDMA_BUFFER_3: + case ARIZONA_DSP3_RDMA_BUFFER_4: + case ARIZONA_DSP3_RDMA_BUFFER_5: + case ARIZONA_DSP3_RDMA_BUFFER_6: + case ARIZONA_DSP3_WDMA_CONFIG_1: + case ARIZONA_DSP3_WDMA_CONFIG_2: + case ARIZONA_DSP3_WDMA_OFFSET_1: + case ARIZONA_DSP3_RDMA_CONFIG_1: + case ARIZONA_DSP3_RDMA_OFFSET_1: + case ARIZONA_DSP3_EXTERNAL_START_SELECT_1: + case ARIZONA_DSP3_SCRATCH_0: + case ARIZONA_DSP3_SCRATCH_1: + case ARIZONA_DSP3_SCRATCH_2: + case ARIZONA_DSP3_SCRATCH_3: + return true; + default: + return cs47l24_is_adsp_memory(reg); + } +} + +static bool cs47l24_volatile_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case ARIZONA_SOFTWARE_RESET: + case ARIZONA_DEVICE_REVISION: + case ARIZONA_WRITE_SEQUENCER_CTRL_0: + case ARIZONA_WRITE_SEQUENCER_CTRL_1: + case ARIZONA_WRITE_SEQUENCER_CTRL_2: + case ARIZONA_HAPTICS_STATUS: + case ARIZONA_SAMPLE_RATE_1_STATUS: + case ARIZONA_SAMPLE_RATE_2_STATUS: + case ARIZONA_SAMPLE_RATE_3_STATUS: + case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS: + case ARIZONA_ASYNC_SAMPLE_RATE_2_STATUS: + case ARIZONA_HP_CTRL_1L: + case ARIZONA_HP_CTRL_1R: + case ARIZONA_INPUT_ENABLES_STATUS: + case ARIZONA_OUTPUT_STATUS_1: + case ARIZONA_RAW_OUTPUT_STATUS_1: + case ARIZONA_INTERRUPT_STATUS_1: + case ARIZONA_INTERRUPT_STATUS_2: + case ARIZONA_INTERRUPT_STATUS_3: + case ARIZONA_INTERRUPT_STATUS_4: + case ARIZONA_INTERRUPT_STATUS_5: + case ARIZONA_INTERRUPT_STATUS_6: + case ARIZONA_IRQ2_STATUS_1: + case ARIZONA_IRQ2_STATUS_2: + case ARIZONA_IRQ2_STATUS_3: + case ARIZONA_IRQ2_STATUS_4: + case ARIZONA_IRQ2_STATUS_5: + case ARIZONA_IRQ2_STATUS_6: + case ARIZONA_INTERRUPT_RAW_STATUS_2: + case ARIZONA_INTERRUPT_RAW_STATUS_3: + case ARIZONA_INTERRUPT_RAW_STATUS_4: + case ARIZONA_INTERRUPT_RAW_STATUS_5: + case ARIZONA_INTERRUPT_RAW_STATUS_6: + case ARIZONA_INTERRUPT_RAW_STATUS_7: + case ARIZONA_INTERRUPT_RAW_STATUS_8: + case ARIZONA_INTERRUPT_RAW_STATUS_9: + case ARIZONA_IRQ_PIN_STATUS: + case ARIZONA_FX_CTRL2: + case ARIZONA_ASRC_STATUS: + case ARIZONA_DSP2_STATUS_1: + case ARIZONA_DSP2_STATUS_2: + case ARIZONA_DSP2_STATUS_3: + case ARIZONA_DSP2_STATUS_4: + case ARIZONA_DSP2_WDMA_BUFFER_1: + case ARIZONA_DSP2_WDMA_BUFFER_2: + case ARIZONA_DSP2_WDMA_BUFFER_3: + case ARIZONA_DSP2_WDMA_BUFFER_4: + case ARIZONA_DSP2_WDMA_BUFFER_5: + case ARIZONA_DSP2_WDMA_BUFFER_6: + case ARIZONA_DSP2_WDMA_BUFFER_7: + case ARIZONA_DSP2_WDMA_BUFFER_8: + case ARIZONA_DSP2_RDMA_BUFFER_1: + case ARIZONA_DSP2_RDMA_BUFFER_2: + case ARIZONA_DSP2_RDMA_BUFFER_3: + case ARIZONA_DSP2_RDMA_BUFFER_4: + case ARIZONA_DSP2_RDMA_BUFFER_5: + case ARIZONA_DSP2_RDMA_BUFFER_6: + case ARIZONA_DSP2_WDMA_CONFIG_1: + case ARIZONA_DSP2_WDMA_CONFIG_2: + case ARIZONA_DSP2_WDMA_OFFSET_1: + case ARIZONA_DSP2_RDMA_CONFIG_1: + case ARIZONA_DSP2_RDMA_OFFSET_1: + case ARIZONA_DSP2_EXTERNAL_START_SELECT_1: + case ARIZONA_DSP2_SCRATCH_0: + case ARIZONA_DSP2_SCRATCH_1: + case ARIZONA_DSP2_SCRATCH_2: + case ARIZONA_DSP2_SCRATCH_3: + case ARIZONA_DSP2_CLOCKING_1: + case ARIZONA_DSP3_STATUS_1: + case ARIZONA_DSP3_STATUS_2: + case ARIZONA_DSP3_STATUS_3: + case ARIZONA_DSP3_STATUS_4: + case ARIZONA_DSP3_WDMA_BUFFER_1: + case ARIZONA_DSP3_WDMA_BUFFER_2: + case ARIZONA_DSP3_WDMA_BUFFER_3: + case ARIZONA_DSP3_WDMA_BUFFER_4: + case ARIZONA_DSP3_WDMA_BUFFER_5: + case ARIZONA_DSP3_WDMA_BUFFER_6: + case ARIZONA_DSP3_WDMA_BUFFER_7: + case ARIZONA_DSP3_WDMA_BUFFER_8: + case ARIZONA_DSP3_RDMA_BUFFER_1: + case ARIZONA_DSP3_RDMA_BUFFER_2: + case ARIZONA_DSP3_RDMA_BUFFER_3: + case ARIZONA_DSP3_RDMA_BUFFER_4: + case ARIZONA_DSP3_RDMA_BUFFER_5: + case ARIZONA_DSP3_RDMA_BUFFER_6: + case ARIZONA_DSP3_WDMA_CONFIG_1: + case ARIZONA_DSP3_WDMA_CONFIG_2: + case ARIZONA_DSP3_WDMA_OFFSET_1: + case ARIZONA_DSP3_RDMA_CONFIG_1: + case ARIZONA_DSP3_RDMA_OFFSET_1: + case ARIZONA_DSP3_EXTERNAL_START_SELECT_1: + case ARIZONA_DSP3_SCRATCH_0: + case ARIZONA_DSP3_SCRATCH_1: + case ARIZONA_DSP3_SCRATCH_2: + case ARIZONA_DSP3_SCRATCH_3: + case ARIZONA_DSP3_CLOCKING_1: + return true; + default: + return cs47l24_is_adsp_memory(reg); + } +} + +#define CS47L24_MAX_REGISTER 0x3b3fff + +const struct regmap_config cs47l24_spi_regmap = { + .reg_bits = 32, + .pad_bits = 16, + .val_bits = 16, + .reg_format_endian = REGMAP_ENDIAN_BIG, + .val_format_endian = REGMAP_ENDIAN_BIG, + + .max_register = CS47L24_MAX_REGISTER, + .readable_reg = cs47l24_readable_register, + .volatile_reg = cs47l24_volatile_register, + + .cache_type = REGCACHE_RBTREE, + .reg_defaults = cs47l24_reg_default, + .num_reg_defaults = ARRAY_SIZE(cs47l24_reg_default), +}; +EXPORT_SYMBOL_GPL(cs47l24_spi_regmap); + diff --git a/drivers/mfd/cs5535-mfd.c b/drivers/mfd/cs5535-mfd.c index be91cb5d6e78..f9d277ff4aaf 100644 --- a/drivers/mfd/cs5535-mfd.c +++ b/drivers/mfd/cs5535-mfd.c @@ -60,6 +60,7 @@ static int cs5535_mfd_res_enable(struct platform_device *pdev) static int cs5535_mfd_res_disable(struct platform_device *pdev) { struct resource *res; + res = platform_get_resource(pdev, IORESOURCE_IO, 0); if (!res) { dev_err(&pdev->dev, "can't fetch device resource info\n"); @@ -114,7 +115,10 @@ static struct mfd_cell cs5535_mfd_cells[] = { #ifdef CONFIG_OLPC static void cs5535_clone_olpc_cells(void) { - const char *acpi_clones[] = { "olpc-xo1-pm-acpi", "olpc-xo1-sci-acpi" }; + static const char *acpi_clones[] = { + "olpc-xo1-pm-acpi", + "olpc-xo1-sci-acpi" + }; if (!machine_is_olpc()) return; diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c index 37e4426ef061..09f367571c58 100644 --- a/drivers/mfd/da903x.c +++ b/drivers/mfd/da903x.c @@ -2,10 +2,10 @@ * Base driver for Dialog Semiconductor DA9030/DA9034 * * Copyright (C) 2008 Compulab, Ltd. - * Mike Rapoport <mike@compulab.co.il> + * Mike Rapoport <mike@compulab.co.il> * * Copyright (C) 2006-2008 Marvell International Ltd. - * Eric Miao <eric.miao@marvell.com> + * Eric Miao <eric.miao@marvell.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -60,7 +60,7 @@ struct da903x_chip_ops { struct da903x_chip { struct i2c_client *client; struct device *dev; - struct da903x_chip_ops *ops; + const struct da903x_chip_ops *ops; int type; uint32_t events_mask; @@ -424,7 +424,7 @@ static irqreturn_t da903x_irq_handler(int irq, void *data) return IRQ_HANDLED; } -static struct da903x_chip_ops da903x_ops[] = { +static const struct da903x_chip_ops da903x_ops[] = { [0] = { .init_chip = da9030_init_chip, .unmask_events = da9030_unmask_events, @@ -565,6 +565,6 @@ static void __exit da903x_exit(void) module_exit(da903x_exit); MODULE_DESCRIPTION("PMIC Driver for Dialog Semiconductor DA9034"); -MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>" - "Mike Rapoport <mike@compulab.co.il>"); -MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"); +MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/da9052-i2c.c b/drivers/mfd/da9052-i2c.c index 2697ffb08009..578e881067a5 100644 --- a/drivers/mfd/da9052-i2c.c +++ b/drivers/mfd/da9052-i2c.c @@ -70,7 +70,7 @@ static int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg) case DA9053_BA: case DA9053_BB: /* A dummy read to a safe register address. */ - if (!i2c_safe_reg(reg)) + if (!i2c_safe_reg(reg)) return regmap_read(da9052->regmap, DA9052_PARK_REGISTER, &val); diff --git a/drivers/mfd/da9052-irq.c b/drivers/mfd/da9052-irq.c index f4cb4613140b..cd4ca849ca44 100644 --- a/drivers/mfd/da9052-irq.c +++ b/drivers/mfd/da9052-irq.c @@ -283,7 +283,7 @@ regmap_err: int da9052_irq_exit(struct da9052 *da9052) { - da9052_free_irq(da9052, DA9052_IRQ_ADC_EOM , da9052); + da9052_free_irq(da9052, DA9052_IRQ_ADC_EOM, da9052); regmap_del_irq_chip(da9052->chip_irq, da9052->irq_data); return 0; diff --git a/drivers/mfd/davinci_voicecodec.c b/drivers/mfd/davinci_voicecodec.c index 9bbc642a7b9d..dff2f19296b8 100644 --- a/drivers/mfd/davinci_voicecodec.c +++ b/drivers/mfd/davinci_voicecodec.c @@ -47,11 +47,8 @@ static int __init davinci_vc_probe(struct platform_device *pdev) davinci_vc = devm_kzalloc(&pdev->dev, sizeof(struct davinci_vc), GFP_KERNEL); - if (!davinci_vc) { - dev_dbg(&pdev->dev, - "could not allocate memory for private data\n"); + if (!davinci_vc) return -ENOMEM; - } davinci_vc->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(davinci_vc->clk)) { diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c index 4c826f78acd0..bf3e0b21b247 100644 --- a/drivers/mfd/dm355evm_msp.c +++ b/drivers/mfd/dm355evm_msp.c @@ -147,7 +147,7 @@ static int msp_gpio_get(struct gpio_chip *chip, unsigned offset) return status; if (reg == DM355EVM_MSP_LED) msp_led_cache = status; - return status & MSP_GPIO_MASK(offset); + return !!(status & MSP_GPIO_MASK(offset)); } static int msp_gpio_out(struct gpio_chip *chip, unsigned offset, int value) diff --git a/drivers/mfd/htc-egpio.c b/drivers/mfd/htc-egpio.c index 6ccaf90d98fd..e4f4a31b76d9 100644 --- a/drivers/mfd/htc-egpio.c +++ b/drivers/mfd/htc-egpio.c @@ -163,7 +163,7 @@ static int egpio_get(struct gpio_chip *chip, unsigned offset) value = egpio_readw(ei, reg); pr_debug("readw(%p + %x) = %x\n", ei->base_addr, reg << ei->bus_shift, value); - return value & bit; + return !!(value & bit); } static int egpio_direction_input(struct gpio_chip *chip, unsigned offset) diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c index b514f3cf140d..bd3aa4578346 100644 --- a/drivers/mfd/lpc_ich.c +++ b/drivers/mfd/lpc_ich.c @@ -55,6 +55,7 @@ * document number TBD : Coleto Creek * document number TBD : Wildcat Point-LP * document number TBD : 9 Series + * document number TBD : Lewisburg */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -213,6 +214,7 @@ enum lpc_chipsets { LPC_COLETO, /* Coleto Creek */ LPC_WPT_LP, /* Wildcat Point-LP */ LPC_BRASWELL, /* Braswell SoC */ + LPC_LEWISBURG, /* Lewisburg */ LPC_9S, /* 9 Series */ }; @@ -521,6 +523,10 @@ static struct lpc_ich_info lpc_chipset_info[] = { .name = "Braswell SoC", .iTCO_version = 3, }, + [LPC_LEWISBURG] = { + .name = "Lewisburg", + .iTCO_version = 2, + }, [LPC_9S] = { .name = "9 Series", .iTCO_version = 2, @@ -757,6 +763,15 @@ static const struct pci_device_id lpc_ich_ids[] = { { PCI_VDEVICE(INTEL, 0x9cc6), LPC_WPT_LP}, { PCI_VDEVICE(INTEL, 0x9cc7), LPC_WPT_LP}, { PCI_VDEVICE(INTEL, 0x9cc9), LPC_WPT_LP}, + { PCI_VDEVICE(INTEL, 0xa1c1), LPC_LEWISBURG}, + { PCI_VDEVICE(INTEL, 0xa1c2), LPC_LEWISBURG}, + { PCI_VDEVICE(INTEL, 0xa1c3), LPC_LEWISBURG}, + { PCI_VDEVICE(INTEL, 0xa1c4), LPC_LEWISBURG}, + { PCI_VDEVICE(INTEL, 0xa1c5), LPC_LEWISBURG}, + { PCI_VDEVICE(INTEL, 0xa1c6), LPC_LEWISBURG}, + { PCI_VDEVICE(INTEL, 0xa1c7), LPC_LEWISBURG}, + { PCI_VDEVICE(INTEL, 0xa242), LPC_LEWISBURG}, + { PCI_VDEVICE(INTEL, 0xa243), LPC_LEWISBURG}, { 0, }, /* End of list */ }; MODULE_DEVICE_TABLE(pci, lpc_ich_ids); diff --git a/drivers/mfd/max14577.c b/drivers/mfd/max14577.c index 56e216dedc91..2280b3fdcf68 100644 --- a/drivers/mfd/max14577.c +++ b/drivers/mfd/max14577.c @@ -495,7 +495,7 @@ MODULE_DEVICE_TABLE(i2c, max14577_i2c_id); #ifdef CONFIG_PM_SLEEP static int max14577_suspend(struct device *dev) { - struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct i2c_client *i2c = to_i2c_client(dev); struct max14577 *max14577 = i2c_get_clientdata(i2c); if (device_may_wakeup(dev)) @@ -516,7 +516,7 @@ static int max14577_suspend(struct device *dev) static int max14577_resume(struct device *dev) { - struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct i2c_client *i2c = to_i2c_client(dev); struct max14577 *max14577 = i2c_get_clientdata(i2c); if (device_may_wakeup(dev)) diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c index d19be64cd32b..d959ebbb2194 100644 --- a/drivers/mfd/max77686.c +++ b/drivers/mfd/max77686.c @@ -352,7 +352,7 @@ MODULE_DEVICE_TABLE(i2c, max77686_i2c_id); #ifdef CONFIG_PM_SLEEP static int max77686_suspend(struct device *dev) { - struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct i2c_client *i2c = to_i2c_client(dev); struct max77686_dev *max77686 = i2c_get_clientdata(i2c); if (device_may_wakeup(dev)) @@ -374,7 +374,7 @@ static int max77686_suspend(struct device *dev) static int max77686_resume(struct device *dev) { - struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct i2c_client *i2c = to_i2c_client(dev); struct max77686_dev *max77686 = i2c_get_clientdata(i2c); if (device_may_wakeup(dev)) diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c index 007f729e150b..b83b7a7da1ae 100644 --- a/drivers/mfd/max77693.c +++ b/drivers/mfd/max77693.c @@ -334,7 +334,7 @@ MODULE_DEVICE_TABLE(i2c, max77693_i2c_id); static int max77693_suspend(struct device *dev) { - struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct i2c_client *i2c = to_i2c_client(dev); struct max77693_dev *max77693 = i2c_get_clientdata(i2c); if (device_may_wakeup(dev)) { @@ -347,7 +347,7 @@ static int max77693_suspend(struct device *dev) static int max77693_resume(struct device *dev) { - struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct i2c_client *i2c = to_i2c_client(dev); struct max77693_dev *max77693 = i2c_get_clientdata(i2c); if (device_may_wakeup(dev)) { diff --git a/drivers/mfd/max77843.c b/drivers/mfd/max77843.c index 586098f1b233..7cfc95b49c5d 100644 --- a/drivers/mfd/max77843.c +++ b/drivers/mfd/max77843.c @@ -197,7 +197,7 @@ MODULE_DEVICE_TABLE(i2c, max77843_id); static int __maybe_unused max77843_suspend(struct device *dev) { - struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct i2c_client *i2c = to_i2c_client(dev); struct max77693_dev *max77843 = i2c_get_clientdata(i2c); disable_irq(max77843->irq); @@ -209,7 +209,7 @@ static int __maybe_unused max77843_suspend(struct device *dev) static int __maybe_unused max77843_resume(struct device *dev) { - struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct i2c_client *i2c = to_i2c_client(dev); struct max77693_dev *max77843 = i2c_get_clientdata(i2c); if (device_may_wakeup(dev)) diff --git a/drivers/mfd/max8925-i2c.c b/drivers/mfd/max8925-i2c.c index b0fe8103e401..70443b161a5b 100644 --- a/drivers/mfd/max8925-i2c.c +++ b/drivers/mfd/max8925-i2c.c @@ -215,7 +215,7 @@ static int max8925_remove(struct i2c_client *client) #ifdef CONFIG_PM_SLEEP static int max8925_suspend(struct device *dev) { - struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct i2c_client *client = to_i2c_client(dev); struct max8925_chip *chip = i2c_get_clientdata(client); if (device_may_wakeup(dev) && chip->wakeup_flag) @@ -225,7 +225,7 @@ static int max8925_suspend(struct device *dev) static int max8925_resume(struct device *dev) { - struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct i2c_client *client = to_i2c_client(dev); struct max8925_chip *chip = i2c_get_clientdata(client); if (device_may_wakeup(dev) && chip->wakeup_flag) diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c index 156ed6f92aa3..f316348e3d98 100644 --- a/drivers/mfd/max8997.c +++ b/drivers/mfd/max8997.c @@ -437,7 +437,7 @@ static u8 max8997_dumpaddr_haptic[] = { static int max8997_freeze(struct device *dev) { - struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct i2c_client *i2c = to_i2c_client(dev); struct max8997_dev *max8997 = i2c_get_clientdata(i2c); int i; @@ -459,7 +459,7 @@ static int max8997_freeze(struct device *dev) static int max8997_restore(struct device *dev) { - struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct i2c_client *i2c = to_i2c_client(dev); struct max8997_dev *max8997 = i2c_get_clientdata(i2c); int i; @@ -481,7 +481,7 @@ static int max8997_restore(struct device *dev) static int max8997_suspend(struct device *dev) { - struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct i2c_client *i2c = to_i2c_client(dev); struct max8997_dev *max8997 = i2c_get_clientdata(i2c); if (device_may_wakeup(dev)) @@ -491,7 +491,7 @@ static int max8997_suspend(struct device *dev) static int max8997_resume(struct device *dev) { - struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct i2c_client *i2c = to_i2c_client(dev); struct max8997_dev *max8997 = i2c_get_clientdata(i2c); if (device_may_wakeup(dev)) diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c index a7afe3bf27fc..ab28b29400f6 100644 --- a/drivers/mfd/max8998.c +++ b/drivers/mfd/max8998.c @@ -274,7 +274,7 @@ MODULE_DEVICE_TABLE(i2c, max8998_i2c_id); static int max8998_suspend(struct device *dev) { - struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct i2c_client *i2c = to_i2c_client(dev); struct max8998_dev *max8998 = i2c_get_clientdata(i2c); if (device_may_wakeup(dev)) @@ -284,7 +284,7 @@ static int max8998_suspend(struct device *dev) static int max8998_resume(struct device *dev) { - struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct i2c_client *i2c = to_i2c_client(dev); struct max8998_dev *max8998 = i2c_get_clientdata(i2c); if (device_may_wakeup(dev)) @@ -344,7 +344,7 @@ static struct max8998_reg_dump max8998_dump[] = { /* Save registers before hibernation */ static int max8998_freeze(struct device *dev) { - struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct i2c_client *i2c = to_i2c_client(dev); int i; for (i = 0; i < ARRAY_SIZE(max8998_dump); i++) @@ -357,7 +357,7 @@ static int max8998_freeze(struct device *dev) /* Restore registers after hibernation */ static int max8998_restore(struct device *dev) { - struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct i2c_client *i2c = to_i2c_client(dev); int i; for (i = 0; i < ARRAY_SIZE(max8998_dump); i++) diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c index 3f9f4c874d2a..d7f54e492aa6 100644 --- a/drivers/mfd/mc13xxx-core.c +++ b/drivers/mfd/mc13xxx-core.c @@ -383,16 +383,16 @@ static int mc13xxx_probe_flags_dt(struct mc13xxx *mc13xxx) if (!np) return -ENODEV; - if (of_get_property(np, "fsl,mc13xxx-uses-adc", NULL)) + if (of_property_read_bool(np, "fsl,mc13xxx-uses-adc")) mc13xxx->flags |= MC13XXX_USE_ADC; - if (of_get_property(np, "fsl,mc13xxx-uses-codec", NULL)) + if (of_property_read_bool(np, "fsl,mc13xxx-uses-codec")) mc13xxx->flags |= MC13XXX_USE_CODEC; - if (of_get_property(np, "fsl,mc13xxx-uses-rtc", NULL)) + if (of_property_read_bool(np, "fsl,mc13xxx-uses-rtc")) mc13xxx->flags |= MC13XXX_USE_RTC; - if (of_get_property(np, "fsl,mc13xxx-uses-touch", NULL)) + if (of_property_read_bool(np, "fsl,mc13xxx-uses-touch")) mc13xxx->flags |= MC13XXX_USE_TOUCHSCREEN; return 0; diff --git a/drivers/mfd/qcom-spmi-pmic.c b/drivers/mfd/qcom-spmi-pmic.c index af6ac1c4b45c..8653e8b9bb4f 100644 --- a/drivers/mfd/qcom-spmi-pmic.c +++ b/drivers/mfd/qcom-spmi-pmic.c @@ -127,7 +127,9 @@ static int pmic_spmi_probe(struct spmi_device *sdev) if (IS_ERR(regmap)) return PTR_ERR(regmap); - pmic_spmi_show_revid(regmap, &sdev->dev); + /* Only the first slave id for a PMIC contains this information */ + if (sdev->usid % 2 == 0) + pmic_spmi_show_revid(regmap, &sdev->dev); return of_platform_populate(root, NULL, NULL, &sdev->dev); } diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c index 207a3bd68559..1be47ad6441b 100644 --- a/drivers/mfd/qcom_rpm.c +++ b/drivers/mfd/qcom_rpm.c @@ -495,6 +495,8 @@ static int qcom_rpm_probe(struct platform_device *pdev) } match = of_match_device(qcom_rpm_of_match, &pdev->dev); + if (!match) + return -ENODEV; rpm->data = match->data; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index 989076d6cb83..400e1d7d8d08 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -29,6 +29,7 @@ #include <linux/mfd/samsung/s2mps11.h> #include <linux/mfd/samsung/s2mps13.h> #include <linux/mfd/samsung/s2mps14.h> +#include <linux/mfd/samsung/s2mps15.h> #include <linux/mfd/samsung/s2mpu02.h> #include <linux/mfd/samsung/s5m8763.h> #include <linux/mfd/samsung/s5m8767.h> @@ -67,7 +68,7 @@ static const struct mfd_cell s5m8767_devs[] = { static const struct mfd_cell s2mps11_devs[] = { { - .name = "s2mps11-pmic", + .name = "s2mps11-regulator", }, { .name = "s2mps14-rtc", }, { @@ -77,7 +78,7 @@ static const struct mfd_cell s2mps11_devs[] = { }; static const struct mfd_cell s2mps13_devs[] = { - { .name = "s2mps13-pmic", }, + { .name = "s2mps13-regulator", }, { .name = "s2mps13-rtc", }, { .name = "s2mps13-clk", @@ -87,7 +88,7 @@ static const struct mfd_cell s2mps13_devs[] = { static const struct mfd_cell s2mps14_devs[] = { { - .name = "s2mps14-pmic", + .name = "s2mps14-regulator", }, { .name = "s2mps14-rtc", }, { @@ -96,6 +97,17 @@ static const struct mfd_cell s2mps14_devs[] = { } }; +static const struct mfd_cell s2mps15_devs[] = { + { + .name = "s2mps15-regulator", + }, { + .name = "s2mps15-rtc", + }, { + .name = "s2mps13-clk", + .of_compatible = "samsung,s2mps13-clk", + }, +}; + static const struct mfd_cell s2mpa01_devs[] = { { .name = "s2mpa01-pmic", @@ -104,7 +116,7 @@ static const struct mfd_cell s2mpa01_devs[] = { static const struct mfd_cell s2mpu02_devs[] = { { - .name = "s2mpu02-pmic", + .name = "s2mpu02-regulator", }, }; @@ -122,6 +134,9 @@ static const struct of_device_id sec_dt_match[] = { .compatible = "samsung,s2mps14-pmic", .data = (void *)S2MPS14X, }, { + .compatible = "samsung,s2mps15-pmic", + .data = (void *)S2MPS15X, + }, { .compatible = "samsung,s2mpa01-pmic", .data = (void *)S2MPA01, }, { @@ -223,6 +238,15 @@ static const struct regmap_config s2mps14_regmap_config = { .cache_type = REGCACHE_FLAT, }; +static const struct regmap_config s2mps15_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = S2MPS15_REG_LDODSCH4, + .volatile_reg = s2mps11_volatile, + .cache_type = REGCACHE_FLAT, +}; + static const struct regmap_config s2mpu02_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -384,6 +408,9 @@ static int sec_pmic_probe(struct i2c_client *i2c, case S2MPS14X: regmap = &s2mps14_regmap_config; break; + case S2MPS15X: + regmap = &s2mps15_regmap_config; + break; case S5M8763X: regmap = &s5m8763_regmap_config; break; @@ -442,6 +469,10 @@ static int sec_pmic_probe(struct i2c_client *i2c, sec_devs = s2mps14_devs; num_sec_devs = ARRAY_SIZE(s2mps14_devs); break; + case S2MPS15X: + sec_devs = s2mps15_devs; + num_sec_devs = ARRAY_SIZE(s2mps15_devs); + break; case S2MPU02: sec_devs = s2mpu02_devs; num_sec_devs = ARRAY_SIZE(s2mpu02_devs); @@ -505,7 +536,7 @@ static void sec_pmic_shutdown(struct i2c_client *i2c) #ifdef CONFIG_PM_SLEEP static int sec_pmic_suspend(struct device *dev) { - struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct i2c_client *i2c = to_i2c_client(dev); struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c); if (device_may_wakeup(dev)) @@ -526,7 +557,7 @@ static int sec_pmic_suspend(struct device *dev) static int sec_pmic_resume(struct device *dev) { - struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct i2c_client *i2c = to_i2c_client(dev); struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c); if (device_may_wakeup(dev)) diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c index 806fa8dbb22d..d77de431cc50 100644 --- a/drivers/mfd/sec-irq.c +++ b/drivers/mfd/sec-irq.c @@ -407,6 +407,11 @@ static const struct regmap_irq_chip s2mps14_irq_chip = { S2MPS1X_IRQ_CHIP_COMMON_DATA, }; +static const struct regmap_irq_chip s2mps15_irq_chip = { + .name = "s2mps15", + S2MPS1X_IRQ_CHIP_COMMON_DATA, +}; + static const struct regmap_irq_chip s2mpu02_irq_chip = { .name = "s2mpu02", .irqs = s2mpu02_irqs, @@ -466,6 +471,9 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic) case S2MPS14X: sec_irq_chip = &s2mps14_irq_chip; break; + case S2MPS15X: + sec_irq_chip = &s2mps15_irq_chip; + break; case S2MPU02: sec_irq_chip = &s2mpu02_irq_chip; break; diff --git a/drivers/mfd/sta2x11-mfd.c b/drivers/mfd/sta2x11-mfd.c index b3e5c6f45105..9292202039ee 100644 --- a/drivers/mfd/sta2x11-mfd.c +++ b/drivers/mfd/sta2x11-mfd.c @@ -372,12 +372,6 @@ static struct platform_driver sta2x11_sctl_platform_driver = { .probe = sta2x11_sctl_probe, }; -static int __init sta2x11_sctl_init(void) -{ - pr_info("%s\n", __func__); - return platform_driver_register(&sta2x11_sctl_platform_driver); -} - static struct platform_driver sta2x11_platform_driver = { .driver = { .name = STA2X11_MFD_APBREG_NAME, @@ -385,12 +379,6 @@ static struct platform_driver sta2x11_platform_driver = { .probe = sta2x11_apbreg_probe, }; -static int __init sta2x11_apbreg_init(void) -{ - pr_info("%s\n", __func__); - return platform_driver_register(&sta2x11_platform_driver); -} - static struct platform_driver sta2x11_apb_soc_regs_platform_driver = { .driver = { .name = STA2X11_MFD_APB_SOC_REGS_NAME, @@ -398,12 +386,6 @@ static struct platform_driver sta2x11_apb_soc_regs_platform_driver = { .probe = sta2x11_apb_soc_regs_probe, }; -static int __init sta2x11_apb_soc_regs_init(void) -{ - pr_info("%s\n", __func__); - return platform_driver_register(&sta2x11_apb_soc_regs_platform_driver); -} - static struct platform_driver sta2x11_scr_platform_driver = { .driver = { .name = STA2X11_MFD_SCR_NAME, @@ -411,13 +393,18 @@ static struct platform_driver sta2x11_scr_platform_driver = { .probe = sta2x11_scr_probe, }; -static int __init sta2x11_scr_init(void) +static struct platform_driver * const drivers[] = { + &sta2x11_platform_driver, + &sta2x11_sctl_platform_driver, + &sta2x11_apb_soc_regs_platform_driver, + &sta2x11_scr_platform_driver, +}; + +static int __init sta2x11_drivers_init(void) { - pr_info("%s\n", __func__); - return platform_driver_register(&sta2x11_scr_platform_driver); + return platform_register_drivers(drivers, ARRAY_SIZE(drivers)); } - /* * What follows are the PCI devices that host the above pdevs. * Each logic block is 4kB and they are all consecutive: we use this info. @@ -664,10 +651,7 @@ static int __init sta2x11_mfd_init(void) * prepares platform drivers very early and probe the PCI device later, * but before other PCI devices. */ -subsys_initcall(sta2x11_apbreg_init); -subsys_initcall(sta2x11_sctl_init); -subsys_initcall(sta2x11_apb_soc_regs_init); -subsys_initcall(sta2x11_scr_init); +subsys_initcall(sta2x11_drivers_init); rootfs_initcall(sta2x11_mfd_init); MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c index 176bf0fa2685..b7aabeefab07 100644 --- a/drivers/mfd/syscon.c +++ b/drivers/mfd/syscon.c @@ -47,6 +47,7 @@ static struct syscon *of_syscon_register(struct device_node *np) struct syscon *syscon; struct regmap *regmap; void __iomem *base; + u32 reg_io_width; int ret; struct regmap_config syscon_config = syscon_regmap_config; @@ -69,6 +70,18 @@ static struct syscon *of_syscon_register(struct device_node *np) else if (of_property_read_bool(np, "little-endian")) syscon_config.val_format_endian = REGMAP_ENDIAN_LITTLE; + /* + * search for reg-io-width property in DT. If it is not provided, + * default to 4 bytes. regmap_init_mmio will return an error if values + * are invalid so there is no need to check them here. + */ + ret = of_property_read_u32(np, "reg-io-width", ®_io_width); + if (ret) + reg_io_width = 4; + + syscon_config.reg_stride = reg_io_width; + syscon_config.val_bits = reg_io_width * 8; + regmap = regmap_init_mmio(NULL, base, &syscon_config); if (IS_ERR(regmap)) { pr_err("regmap init failed\n"); diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c index 8c84a513016b..1ecbfa40d1b3 100644 --- a/drivers/mfd/tc6393xb.c +++ b/drivers/mfd/tc6393xb.c @@ -437,8 +437,8 @@ static int tc6393xb_gpio_get(struct gpio_chip *chip, struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio); /* XXX: does dsr also represent inputs? */ - return tmio_ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8)) - & TC_GPIO_BIT(offset); + return !!(tmio_ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8)) + & TC_GPIO_BIT(offset)); } static void __tc6393xb_gpio_set(struct gpio_chip *chip, diff --git a/drivers/mfd/tps65010.c b/drivers/mfd/tps65010.c index 448f0a182dc4..677a127619d4 100644 --- a/drivers/mfd/tps65010.c +++ b/drivers/mfd/tps65010.c @@ -499,11 +499,11 @@ static int tps65010_gpio_get(struct gpio_chip *chip, unsigned offset) if (offset < 4) { value = i2c_smbus_read_byte_data(tps->client, TPS_DEFGPIO); if (value < 0) - return 0; + return value; if (value & (1 << (offset + 4))) /* output */ return !(value & (1 << offset)); else /* input */ - return (value & (1 << offset)); + return !!(value & (1 << offset)); } /* REVISIT we *could* report LED1/nPG and LED2 state ... */ diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index f691d7ecad52..e0dd83fb95d3 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -133,7 +133,7 @@ static int ucb1x00_gpio_get(struct gpio_chip *chip, unsigned offset) val = ucb1x00_reg_read(ucb, UCB_IO_DATA); ucb1x00_disable(ucb); - return val & (1 << offset); + return !!(val & (1 << offset)); } static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset) diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c index 2bb2d0467a92..c18e11f42b3f 100644 --- a/drivers/mfd/wm5110-tables.c +++ b/drivers/mfd/wm5110-tables.c @@ -762,9 +762,9 @@ static const struct reg_default wm5110_reg_default[] = { { 0x00000200, 0x0006 }, /* R512 - Mic Charge Pump 1 */ { 0x00000210, 0x0184 }, /* R528 - LDO1 Control 1 */ { 0x00000213, 0x03E4 }, /* R531 - LDO2 Control 1 */ - { 0x00000218, 0x01A6 }, /* R536 - Mic Bias Ctrl 1 */ - { 0x00000219, 0x01A6 }, /* R537 - Mic Bias Ctrl 2 */ - { 0x0000021A, 0x01A6 }, /* R538 - Mic Bias Ctrl 3 */ + { 0x00000218, 0x00E6 }, /* R536 - Mic Bias Ctrl 1 */ + { 0x00000219, 0x00E6 }, /* R537 - Mic Bias Ctrl 2 */ + { 0x0000021A, 0x00E6 }, /* R538 - Mic Bias Ctrl 3 */ { 0x00000293, 0x0000 }, /* R659 - Accessory Detect Mode 1 */ { 0x0000029B, 0x0028 }, /* R667 - Headphone Detect 1 */ { 0x000002A2, 0x0000 }, /* R674 - Micd clamp control */ diff --git a/drivers/mfd/wm831x-otp.c b/drivers/mfd/wm831x-otp.c index b90f3e06b6c9..ebac0027f8e0 100644 --- a/drivers/mfd/wm831x-otp.c +++ b/drivers/mfd/wm831x-otp.c @@ -47,20 +47,14 @@ static ssize_t wm831x_unique_id_show(struct device *dev, struct device_attribute *attr, char *buf) { struct wm831x *wm831x = dev_get_drvdata(dev); - int i, rval; + int rval; char id[WM831X_UNIQUE_ID_LEN]; - ssize_t ret = 0; rval = wm831x_unique_id_read(wm831x, id); if (rval < 0) return 0; - for (i = 0; i < WM831X_UNIQUE_ID_LEN; i++) - ret += sprintf(&buf[ret], "%02x", buf[i]); - - ret += sprintf(&buf[ret], "\n"); - - return ret; + return sprintf(buf, "%*phN\n", WM831X_UNIQUE_ID_LEN, id); } static DEVICE_ATTR(unique_id, 0444, wm831x_unique_id_show, NULL); diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 8df0b0e62976..2805b014ae31 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -588,10 +588,10 @@ config REGULATOR_S2MPA01 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. config REGULATOR_S2MPS11 - tristate "Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage regulator" + tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator" depends on MFD_SEC_CORE help - This driver supports a Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage + This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage output regulator via I2C bus. The chip is comprised of high efficient Buck converters including Dual-Phase Buck converter, Buck-Boost converter, various LDOs. diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index 72fc3c32db49..3242ffc0cb25 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -32,6 +32,7 @@ #include <linux/mfd/samsung/s2mps11.h> #include <linux/mfd/samsung/s2mps13.h> #include <linux/mfd/samsung/s2mps14.h> +#include <linux/mfd/samsung/s2mps15.h> #include <linux/mfd/samsung/s2mpu02.h> /* The highest number of possible regulators for supported devices. */ @@ -661,6 +662,133 @@ static const struct regulator_desc s2mps14_regulators[] = { S2MPS14_BUCK1235_START_SEL), }; +static struct regulator_ops s2mps15_reg_ldo_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, +}; + +static struct regulator_ops s2mps15_reg_buck_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, +}; + +#define regulator_desc_s2mps15_ldo(num, range) { \ + .name = "LDO"#num, \ + .id = S2MPS15_LDO##num, \ + .ops = &s2mps15_reg_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .linear_ranges = range, \ + .n_linear_ranges = ARRAY_SIZE(range), \ + .n_voltages = S2MPS15_LDO_N_VOLTAGES, \ + .vsel_reg = S2MPS15_REG_L1CTRL + num - 1, \ + .vsel_mask = S2MPS15_LDO_VSEL_MASK, \ + .enable_reg = S2MPS15_REG_L1CTRL + num - 1, \ + .enable_mask = S2MPS15_ENABLE_MASK \ +} + +#define regulator_desc_s2mps15_buck(num, range) { \ + .name = "BUCK"#num, \ + .id = S2MPS15_BUCK##num, \ + .ops = &s2mps15_reg_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .linear_ranges = range, \ + .n_linear_ranges = ARRAY_SIZE(range), \ + .ramp_delay = 12500, \ + .n_voltages = S2MPS15_BUCK_N_VOLTAGES, \ + .vsel_reg = S2MPS15_REG_B1CTRL2 + ((num - 1) * 2), \ + .vsel_mask = S2MPS15_BUCK_VSEL_MASK, \ + .enable_reg = S2MPS15_REG_B1CTRL1 + ((num - 1) * 2), \ + .enable_mask = S2MPS15_ENABLE_MASK \ +} + +/* voltage range for s2mps15 LDO 3, 5, 15, 16, 18, 20, 23 and 27 */ +static const struct regulator_linear_range s2mps15_ldo_voltage_ranges1[] = { + REGULATOR_LINEAR_RANGE(1000000, 0xc, 0x38, 25000), +}; + +/* voltage range for s2mps15 LDO 2, 6, 14, 17, 19, 21, 24 and 25 */ +static const struct regulator_linear_range s2mps15_ldo_voltage_ranges2[] = { + REGULATOR_LINEAR_RANGE(1800000, 0x0, 0x3f, 25000), +}; + +/* voltage range for s2mps15 LDO 4, 11, 12, 13, 22 and 26 */ +static const struct regulator_linear_range s2mps15_ldo_voltage_ranges3[] = { + REGULATOR_LINEAR_RANGE(700000, 0x0, 0x34, 12500), +}; + +/* voltage range for s2mps15 LDO 7, 8, 9 and 10 */ +static const struct regulator_linear_range s2mps15_ldo_voltage_ranges4[] = { + REGULATOR_LINEAR_RANGE(700000, 0xc, 0x18, 25000), +}; + +/* voltage range for s2mps15 LDO 1 */ +static const struct regulator_linear_range s2mps15_ldo_voltage_ranges5[] = { + REGULATOR_LINEAR_RANGE(500000, 0x0, 0x20, 12500), +}; + +/* voltage range for s2mps15 BUCK 1, 2, 3, 4, 5, 6 and 7 */ +static const struct regulator_linear_range s2mps15_buck_voltage_ranges1[] = { + REGULATOR_LINEAR_RANGE(500000, 0x20, 0xb0, 6250), +}; + +/* voltage range for s2mps15 BUCK 8, 9 and 10 */ +static const struct regulator_linear_range s2mps15_buck_voltage_ranges2[] = { + REGULATOR_LINEAR_RANGE(1000000, 0x20, 0xc0, 12500), +}; + +static const struct regulator_desc s2mps15_regulators[] = { + regulator_desc_s2mps15_ldo(1, s2mps15_ldo_voltage_ranges5), + regulator_desc_s2mps15_ldo(2, s2mps15_ldo_voltage_ranges2), + regulator_desc_s2mps15_ldo(3, s2mps15_ldo_voltage_ranges1), + regulator_desc_s2mps15_ldo(4, s2mps15_ldo_voltage_ranges3), + regulator_desc_s2mps15_ldo(5, s2mps15_ldo_voltage_ranges1), + regulator_desc_s2mps15_ldo(6, s2mps15_ldo_voltage_ranges2), + regulator_desc_s2mps15_ldo(7, s2mps15_ldo_voltage_ranges4), + regulator_desc_s2mps15_ldo(8, s2mps15_ldo_voltage_ranges4), + regulator_desc_s2mps15_ldo(9, s2mps15_ldo_voltage_ranges4), + regulator_desc_s2mps15_ldo(10, s2mps15_ldo_voltage_ranges4), + regulator_desc_s2mps15_ldo(11, s2mps15_ldo_voltage_ranges3), + regulator_desc_s2mps15_ldo(12, s2mps15_ldo_voltage_ranges3), + regulator_desc_s2mps15_ldo(13, s2mps15_ldo_voltage_ranges3), + regulator_desc_s2mps15_ldo(14, s2mps15_ldo_voltage_ranges2), + regulator_desc_s2mps15_ldo(15, s2mps15_ldo_voltage_ranges1), + regulator_desc_s2mps15_ldo(16, s2mps15_ldo_voltage_ranges1), + regulator_desc_s2mps15_ldo(17, s2mps15_ldo_voltage_ranges2), + regulator_desc_s2mps15_ldo(18, s2mps15_ldo_voltage_ranges1), + regulator_desc_s2mps15_ldo(19, s2mps15_ldo_voltage_ranges2), + regulator_desc_s2mps15_ldo(20, s2mps15_ldo_voltage_ranges1), + regulator_desc_s2mps15_ldo(21, s2mps15_ldo_voltage_ranges2), + regulator_desc_s2mps15_ldo(22, s2mps15_ldo_voltage_ranges3), + regulator_desc_s2mps15_ldo(23, s2mps15_ldo_voltage_ranges1), + regulator_desc_s2mps15_ldo(24, s2mps15_ldo_voltage_ranges2), + regulator_desc_s2mps15_ldo(25, s2mps15_ldo_voltage_ranges2), + regulator_desc_s2mps15_ldo(26, s2mps15_ldo_voltage_ranges3), + regulator_desc_s2mps15_ldo(27, s2mps15_ldo_voltage_ranges1), + regulator_desc_s2mps15_buck(1, s2mps15_buck_voltage_ranges1), + regulator_desc_s2mps15_buck(2, s2mps15_buck_voltage_ranges1), + regulator_desc_s2mps15_buck(3, s2mps15_buck_voltage_ranges1), + regulator_desc_s2mps15_buck(4, s2mps15_buck_voltage_ranges1), + regulator_desc_s2mps15_buck(5, s2mps15_buck_voltage_ranges1), + regulator_desc_s2mps15_buck(6, s2mps15_buck_voltage_ranges1), + regulator_desc_s2mps15_buck(7, s2mps15_buck_voltage_ranges1), + regulator_desc_s2mps15_buck(8, s2mps15_buck_voltage_ranges2), + regulator_desc_s2mps15_buck(9, s2mps15_buck_voltage_ranges2), + regulator_desc_s2mps15_buck(10, s2mps15_buck_voltage_ranges2), +}; + static int s2mps14_pmic_enable_ext_control(struct s2mps11_info *s2mps11, struct regulator_dev *rdev) { @@ -974,6 +1102,10 @@ static int s2mps11_pmic_probe(struct platform_device *pdev) regulators = s2mps14_regulators; BUILD_BUG_ON(S2MPS_REGULATOR_MAX < s2mps11->rdev_num); break; + case S2MPS15X: + s2mps11->rdev_num = ARRAY_SIZE(s2mps15_regulators); + regulators = s2mps15_regulators; + break; case S2MPU02: s2mps11->rdev_num = ARRAY_SIZE(s2mpu02_regulators); regulators = s2mpu02_regulators; @@ -1067,10 +1199,11 @@ out: } static const struct platform_device_id s2mps11_pmic_id[] = { - { "s2mps11-pmic", S2MPS11X}, - { "s2mps13-pmic", S2MPS13X}, - { "s2mps14-pmic", S2MPS14X}, - { "s2mpu02-pmic", S2MPU02}, + { "s2mps11-regulator", S2MPS11X}, + { "s2mps13-regulator", S2MPS13X}, + { "s2mps14-regulator", S2MPS14X}, + { "s2mps15-regulator", S2MPS15X}, + { "s2mpu02-regulator", S2MPU02}, { }, }; MODULE_DEVICE_TABLE(platform, s2mps11_pmic_id); @@ -1097,5 +1230,5 @@ module_exit(s2mps11_pmic_exit); /* Module information */ MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>"); -MODULE_DESCRIPTION("SAMSUNG S2MPS11/S2MPS14/S2MPU02 Regulator Driver"); +MODULE_DESCRIPTION("SAMSUNG S2MPS11/S2MPS14/S2MPS15/S2MPU02 Regulator Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c index f2504b4eef34..0d68a85dd429 100644 --- a/drivers/rtc/rtc-s5m.c +++ b/drivers/rtc/rtc-s5m.c @@ -188,6 +188,7 @@ static inline int s5m_check_peding_alarm_interrupt(struct s5m_rtc_info *info, ret = regmap_read(info->regmap, S5M_RTC_STATUS, &val); val &= S5M_ALARM0_STATUS; break; + case S2MPS15X: case S2MPS14X: case S2MPS13X: ret = regmap_read(info->s5m87xx->regmap_pmic, S2MPS14_REG_ST2, @@ -219,9 +220,22 @@ static inline int s5m8767_rtc_set_time_reg(struct s5m_rtc_info *info) return ret; } - data |= info->regs->rtc_udr_mask; - if (info->device_type == S5M8763X || info->device_type == S5M8767X) - data |= S5M_RTC_TIME_EN_MASK; + switch (info->device_type) { + case S5M8763X: + case S5M8767X: + data |= info->regs->rtc_udr_mask | S5M_RTC_TIME_EN_MASK; + case S2MPS15X: + /* As per UM, for write time register, set WUDR bit to high */ + data |= S2MPS15_RTC_WUDR_MASK; + break; + case S2MPS14X: + case S2MPS13X: + data |= info->regs->rtc_udr_mask; + break; + default: + return -EINVAL; + } + ret = regmap_write(info->regmap, info->regs->rtc_udr_update, data); if (ret < 0) { @@ -252,6 +266,11 @@ static inline int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info) case S5M8767X: data &= ~S5M_RTC_TIME_EN_MASK; break; + case S2MPS15X: + /* As per UM, for write alarm, set A_UDR(bit[4]) to high + * rtc_udr_mask above sets bit[4] + */ + break; case S2MPS14X: data |= S2MPS_RTC_RUDR_MASK; break; @@ -317,7 +336,8 @@ static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm) u8 data[info->regs->regs_count]; int ret; - if (info->device_type == S2MPS14X || info->device_type == S2MPS13X) { + if (info->device_type == S2MPS15X || info->device_type == S2MPS14X || + info->device_type == S2MPS13X) { ret = regmap_update_bits(info->regmap, info->regs->rtc_udr_update, S2MPS_RTC_RUDR_MASK, S2MPS_RTC_RUDR_MASK); @@ -339,6 +359,7 @@ static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm) break; case S5M8767X: + case S2MPS15X: case S2MPS14X: case S2MPS13X: s5m8767_data_to_tm(data, tm, info->rtc_24hr_mode); @@ -366,6 +387,7 @@ static int s5m_rtc_set_time(struct device *dev, struct rtc_time *tm) s5m8763_tm_to_data(tm, data); break; case S5M8767X: + case S2MPS15X: case S2MPS14X: case S2MPS13X: ret = s5m8767_tm_to_data(tm, data); @@ -414,6 +436,7 @@ static int s5m_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) break; case S5M8767X: + case S2MPS15X: case S2MPS14X: case S2MPS13X: s5m8767_data_to_tm(data, &alrm->time, info->rtc_24hr_mode); @@ -463,6 +486,7 @@ static int s5m_rtc_stop_alarm(struct s5m_rtc_info *info) break; case S5M8767X: + case S2MPS15X: case S2MPS14X: case S2MPS13X: for (i = 0; i < info->regs->regs_count; i++) @@ -508,6 +532,7 @@ static int s5m_rtc_start_alarm(struct s5m_rtc_info *info) break; case S5M8767X: + case S2MPS15X: case S2MPS14X: case S2MPS13X: data[RTC_SEC] |= ALARM_ENABLE_MASK; @@ -548,6 +573,7 @@ static int s5m_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) break; case S5M8767X: + case S2MPS15X: case S2MPS14X: case S2MPS13X: s5m8767_tm_to_data(&alrm->time, data); @@ -631,6 +657,7 @@ static int s5m8767_rtc_init_reg(struct s5m_rtc_info *info) ret = regmap_raw_write(info->regmap, S5M_ALARM0_CONF, data, 2); break; + case S2MPS15X: case S2MPS14X: case S2MPS13X: data[0] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT); @@ -679,6 +706,7 @@ static int s5m_rtc_probe(struct platform_device *pdev) return -ENOMEM; switch (platform_get_device_id(pdev)->driver_data) { + case S2MPS15X: case S2MPS14X: case S2MPS13X: regmap_cfg = &s2mps14_rtc_regmap_config; @@ -805,6 +833,7 @@ static const struct platform_device_id s5m_rtc_id[] = { { "s5m-rtc", S5M8767X }, { "s2mps13-rtc", S2MPS13X }, { "s2mps14-rtc", S2MPS14X }, + { "s2mps15-rtc", S2MPS15X }, { }, }; MODULE_DEVICE_TABLE(platform, s5m_rtc_id); diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h index 79e607e2f081..d55a42297d49 100644 --- a/include/linux/mfd/arizona/core.h +++ b/include/linux/mfd/arizona/core.h @@ -27,6 +27,8 @@ enum arizona_type { WM8280 = 4, WM8998 = 5, WM1814 = 6, + WM1831 = 7, + CS47L24 = 8, }; #define ARIZONA_IRQ_GP1 0 @@ -166,6 +168,7 @@ static inline int wm5102_patch(struct arizona *arizona) #endif int wm5110_patch(struct arizona *arizona); +int cs47l24_patch(struct arizona *arizona); int wm8997_patch(struct arizona *arizona); int wm8998_patch(struct arizona *arizona); diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h index 57b45caaea80..64faeeff698c 100644 --- a/include/linux/mfd/arizona/pdata.h +++ b/include/linux/mfd/arizona/pdata.h @@ -171,7 +171,7 @@ struct arizona_pdata { int inmode[ARIZONA_MAX_INPUT]; /** Mode for outputs */ - bool out_mono[ARIZONA_MAX_OUTPUT]; + int out_mono[ARIZONA_MAX_OUTPUT]; /** PDM speaker mute setting */ unsigned int spk_mute[ARIZONA_MAX_PDM_SPK]; diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index a06098639399..6bc4bcd488ac 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -44,6 +44,7 @@ enum sec_device_type { S2MPS11X, S2MPS13X, S2MPS14X, + S2MPS15X, S2MPU02, }; diff --git a/include/linux/mfd/samsung/rtc.h b/include/linux/mfd/samsung/rtc.h index 29c30ac36020..a65e4655d470 100644 --- a/include/linux/mfd/samsung/rtc.h +++ b/include/linux/mfd/samsung/rtc.h @@ -107,6 +107,8 @@ enum s2mps_rtc_reg { #define S2MPS_RTC_WUDR_MASK (1 << S2MPS_RTC_WUDR_SHIFT) #define S2MPS13_RTC_AUDR_SHIFT 1 #define S2MPS13_RTC_AUDR_MASK (1 << S2MPS13_RTC_AUDR_SHIFT) +#define S2MPS15_RTC_WUDR_SHIFT 1 +#define S2MPS15_RTC_WUDR_MASK (1 << S2MPS15_RTC_WUDR_SHIFT) #define S2MPS_RTC_RUDR_SHIFT 0 #define S2MPS_RTC_RUDR_MASK (1 << S2MPS_RTC_RUDR_SHIFT) #define RTC_TCON_SHIFT 1 diff --git a/include/linux/mfd/samsung/s2mps15.h b/include/linux/mfd/samsung/s2mps15.h new file mode 100644 index 000000000000..36d35287c3c0 --- /dev/null +++ b/include/linux/mfd/samsung/s2mps15.h @@ -0,0 +1,158 @@ +/* + * Copyright (c) 2015 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_MFD_S2MPS15_H +#define __LINUX_MFD_S2MPS15_H + +/* S2MPS15 registers */ +enum s2mps15_reg { + S2MPS15_REG_ID, + S2MPS15_REG_INT1, + S2MPS15_REG_INT2, + S2MPS15_REG_INT3, + S2MPS15_REG_INT1M, + S2MPS15_REG_INT2M, + S2MPS15_REG_INT3M, + S2MPS15_REG_ST1, + S2MPS15_REG_ST2, + S2MPS15_REG_PWRONSRC, + S2MPS15_REG_OFFSRC, + S2MPS15_REG_BU_CHG, + S2MPS15_REG_RTC_BUF, + S2MPS15_REG_CTRL1, + S2MPS15_REG_CTRL2, + S2MPS15_REG_RSVD1, + S2MPS15_REG_RSVD2, + S2MPS15_REG_RSVD3, + S2MPS15_REG_RSVD4, + S2MPS15_REG_RSVD5, + S2MPS15_REG_RSVD6, + S2MPS15_REG_CTRL3, + S2MPS15_REG_RSVD7, + S2MPS15_REG_RSVD8, + S2MPS15_REG_RSVD9, + S2MPS15_REG_B1CTRL1, + S2MPS15_REG_B1CTRL2, + S2MPS15_REG_B2CTRL1, + S2MPS15_REG_B2CTRL2, + S2MPS15_REG_B3CTRL1, + S2MPS15_REG_B3CTRL2, + S2MPS15_REG_B4CTRL1, + S2MPS15_REG_B4CTRL2, + S2MPS15_REG_B5CTRL1, + S2MPS15_REG_B5CTRL2, + S2MPS15_REG_B6CTRL1, + S2MPS15_REG_B6CTRL2, + S2MPS15_REG_B7CTRL1, + S2MPS15_REG_B7CTRL2, + S2MPS15_REG_B8CTRL1, + S2MPS15_REG_B8CTRL2, + S2MPS15_REG_B9CTRL1, + S2MPS15_REG_B9CTRL2, + S2MPS15_REG_B10CTRL1, + S2MPS15_REG_B10CTRL2, + S2MPS15_REG_BBCTRL1, + S2MPS15_REG_BBCTRL2, + S2MPS15_REG_BRAMP, + S2MPS15_REG_LDODVS1, + S2MPS15_REG_LDODVS2, + S2MPS15_REG_LDODVS3, + S2MPS15_REG_LDODVS4, + S2MPS15_REG_L1CTRL, + S2MPS15_REG_L2CTRL, + S2MPS15_REG_L3CTRL, + S2MPS15_REG_L4CTRL, + S2MPS15_REG_L5CTRL, + S2MPS15_REG_L6CTRL, + S2MPS15_REG_L7CTRL, + S2MPS15_REG_L8CTRL, + S2MPS15_REG_L9CTRL, + S2MPS15_REG_L10CTRL, + S2MPS15_REG_L11CTRL, + S2MPS15_REG_L12CTRL, + S2MPS15_REG_L13CTRL, + S2MPS15_REG_L14CTRL, + S2MPS15_REG_L15CTRL, + S2MPS15_REG_L16CTRL, + S2MPS15_REG_L17CTRL, + S2MPS15_REG_L18CTRL, + S2MPS15_REG_L19CTRL, + S2MPS15_REG_L20CTRL, + S2MPS15_REG_L21CTRL, + S2MPS15_REG_L22CTRL, + S2MPS15_REG_L23CTRL, + S2MPS15_REG_L24CTRL, + S2MPS15_REG_L25CTRL, + S2MPS15_REG_L26CTRL, + S2MPS15_REG_L27CTRL, + S2MPS15_REG_LDODSCH1, + S2MPS15_REG_LDODSCH2, + S2MPS15_REG_LDODSCH3, + S2MPS15_REG_LDODSCH4, +}; + +/* S2MPS15 regulator ids */ +enum s2mps15_regulators { + S2MPS15_LDO1, + S2MPS15_LDO2, + S2MPS15_LDO3, + S2MPS15_LDO4, + S2MPS15_LDO5, + S2MPS15_LDO6, + S2MPS15_LDO7, + S2MPS15_LDO8, + S2MPS15_LDO9, + S2MPS15_LDO10, + S2MPS15_LDO11, + S2MPS15_LDO12, + S2MPS15_LDO13, + S2MPS15_LDO14, + S2MPS15_LDO15, + S2MPS15_LDO16, + S2MPS15_LDO17, + S2MPS15_LDO18, + S2MPS15_LDO19, + S2MPS15_LDO20, + S2MPS15_LDO21, + S2MPS15_LDO22, + S2MPS15_LDO23, + S2MPS15_LDO24, + S2MPS15_LDO25, + S2MPS15_LDO26, + S2MPS15_LDO27, + S2MPS15_BUCK1, + S2MPS15_BUCK2, + S2MPS15_BUCK3, + S2MPS15_BUCK4, + S2MPS15_BUCK5, + S2MPS15_BUCK6, + S2MPS15_BUCK7, + S2MPS15_BUCK8, + S2MPS15_BUCK9, + S2MPS15_BUCK10, + S2MPS15_BUCK11, + S2MPS15_REGULATOR_MAX, +}; + +#define S2MPS15_LDO_VSEL_MASK (0x3F) +#define S2MPS15_BUCK_VSEL_MASK (0xFF) + +#define S2MPS15_ENABLE_SHIFT (0x06) +#define S2MPS15_ENABLE_MASK (0x03 << S2MPS15_ENABLE_SHIFT) + +#define S2MPS15_LDO_N_VOLTAGES (S2MPS15_LDO_VSEL_MASK + 1) +#define S2MPS15_BUCK_N_VOLTAGES (S2MPS15_BUCK_VSEL_MASK + 1) + +#endif /* __LINUX_MFD_S2MPS15_H */ |
