diff options
| -rw-r--r-- | arch/arm/mach-pxa/mfp.c | 9 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/pxa3xx.c | 73 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/sleep.S | 102 | ||||
| -rw-r--r-- | include/asm-arm/arch-pxa/pxa3xx-regs.h | 13 |
4 files changed, 183 insertions, 14 deletions
diff --git a/arch/arm/mach-pxa/mfp.c b/arch/arm/mach-pxa/mfp.c index 6ce35041c7ed..f5809adce298 100644 --- a/arch/arm/mach-pxa/mfp.c +++ b/arch/arm/mach-pxa/mfp.c @@ -22,6 +22,7 @@ #include <asm/hardware.h> #include <asm/arch/mfp.h> #include <asm/arch/mfp-pxa3xx.h> +#include <asm/arch/pxa3xx-regs.h> /* mfp_spin_lock is used to ensure that MFP register configuration * (most likely a read-modify-write operation) is atomic, and that @@ -223,6 +224,14 @@ static int pxa3xx_mfp_resume(struct sys_device *d) struct pxa3xx_mfp_pin *p = &mfp_table[pin]; __mfp_config_run(p); } + + /* clear RDH bit when MFP settings are restored + * + * NOTE: the last 3 bits DxS are write-1-to-clear so carefully + * preserve them here in case they will be referenced later + */ + ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S); + return 0; } diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index d0b2afd4368a..e47e67c11afe 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -40,6 +40,7 @@ #define RO_CLK 60000000 #define ACCR_D0CS (1 << 26) +#define ACCR_PCCE (1 << 11) /* crystal frequency to static memory controller multiplier (SMCFS) */ static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, }; @@ -204,7 +205,6 @@ static struct clk pxa3xx_clks[] = { }; #ifdef CONFIG_PM -#define SLEEP_SAVE_SIZE 4 #define ISRAM_START 0x5c000000 #define ISRAM_SIZE SZ_256K @@ -212,25 +212,29 @@ static struct clk pxa3xx_clks[] = { static void __iomem *sram; static unsigned long wakeup_src; -static void pxa3xx_cpu_pm_save(unsigned long *sleep_save) -{ - pr_debug("PM: CKENA=%08x CKENB=%08x\n", CKENA, CKENB); +#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x +#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x] - if (CKENA & (1 << CKEN_USBH)) { - printk(KERN_ERR "PM: USB host clock not stopped?\n"); - CKENA &= ~(1 << CKEN_USBH); - } -// CKENA |= 1 << (CKEN_ISC & 31); +enum { SLEEP_SAVE_START = 0, + SLEEP_SAVE_CKENA, + SLEEP_SAVE_CKENB, + SLEEP_SAVE_ACCR, - /* - * Low power modes require the HSIO2 clock to be enabled. - */ - CKENB |= 1 << (CKEN_HSIO2 & 31); + SLEEP_SAVE_SIZE, +}; + +static void pxa3xx_cpu_pm_save(unsigned long *sleep_save) +{ + SAVE(CKENA); + SAVE(CKENB); + SAVE(ACCR); } static void pxa3xx_cpu_pm_restore(unsigned long *sleep_save) { - CKENB &= ~(1 << (CKEN_HSIO2 & 31)); + RESTORE(ACCR); + RESTORE(CKENA); + RESTORE(CKENB); } /* @@ -266,6 +270,46 @@ static void pxa3xx_cpu_standby(unsigned int pwrmode) printk("PM: AD2D0SR=%08x ASCR=%08x\n", AD2D0SR, ASCR); } +/* + * NOTE: currently, the OBM (OEM Boot Module) binary comes along with + * PXA3xx development kits assumes that the resuming process continues + * with the address stored within the first 4 bytes of SDRAM. The PSPR + * register is used privately by BootROM and OBM, and _must_ be set to + * 0x5c014000 for the moment. + */ +static void pxa3xx_cpu_pm_suspend(void) +{ + volatile unsigned long *p = (volatile void *)0xc0000000; + unsigned long saved_data = *p; + + extern void pxa3xx_cpu_suspend(void); + extern void pxa3xx_cpu_resume(void); + + /* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */ + CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM); + CKENB |= 1 << (CKEN_HSIO2 & 0x1f); + + /* clear and setup wakeup source */ + AD3SR = ~0; + AD3ER = wakeup_src; + ASCR = ASCR; + ARSR = ARSR; + + PCFR |= (1u << 13); /* L1_DIS */ + PCFR &= ~((1u << 12) | (1u << 1)); /* L0_EN | SL_ROD */ + + PSPR = 0x5c014000; + + /* overwrite with the resume address */ + *p = virt_to_phys(pxa3xx_cpu_resume); + + pxa3xx_cpu_suspend(); + + *p = saved_data; + + AD3ER = 0; +} + static void pxa3xx_cpu_pm_enter(suspend_state_t state) { /* @@ -280,6 +324,7 @@ static void pxa3xx_cpu_pm_enter(suspend_state_t state) break; case PM_SUSPEND_MEM: + pxa3xx_cpu_pm_suspend(); break; } } diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index 14bb4a93ea52..784716eb7fc5 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -50,6 +50,108 @@ pxa_cpu_save_sp: str r0, [r1] ldr pc, [sp], #4 +#ifdef CONFIG_PXA3xx +/* + * pxa3xx_cpu_suspend() - forces CPU into sleep state (S2D3C4) + * + * NOTE: unfortunately, pxa_cpu_save_cp can not be reused here since + * the auxiliary control register address is different between pxa3xx + * and pxa{25x,27x} + */ + +ENTRY(pxa3xx_cpu_suspend) + +#ifndef CONFIG_IWMMXT + mra r2, r3, acc0 +#endif + stmfd sp!, {r2 - r12, lr} @ save registers on stack + + mrc p14, 0, r3, c6, c0, 0 @ clock configuration, for turbo mode + mrc p15, 0, r4, c15, c1, 0 @ CP access reg + mrc p15, 0, r5, c13, c0, 0 @ PID + mrc p15, 0, r6, c3, c0, 0 @ domain ID + mrc p15, 0, r7, c2, c0, 0 @ translation table base addr + mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg + mrc p15, 0, r9, c1, c0, 0 @ control reg + + bic r3, r3, #2 @ clear frequency change bit + + @ store them plus current virtual stack ptr on stack + mov r10, sp + stmfd sp!, {r3 - r10} + + @ store physical address of stack pointer + mov r0, sp + bl sleep_phys_sp + ldr r1, =sleep_save_sp + str r0, [r1] + + @ clean data cache + bl xsc3_flush_kern_cache_all + + mov r0, #0x06 @ S2D3C4 mode + mcr p14, 0, r0, c7, c0, 0 @ enter sleep + +20: b 20b @ waiting for sleep + + .data + .align 5 +/* + * pxa3xx_cpu_resume + */ + +ENTRY(pxa3xx_cpu_resume) + + mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off + msr cpsr_c, r0 + + ldr r0, sleep_save_sp @ stack phys addr + ldmfd r0, {r3 - r9, sp} @ CP regs + virt stack ptr + + mov r1, #0 + mcr p15, 0, r1, c7, c7, 0 @ invalidate I & D caches, BTB + mcr p15, 0, r1, c7, c10, 4 @ drain write (&fill) buffer + mcr p15, 0, r1, c7, c5, 4 @ flush prefetch buffer + mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs + + mcr p14, 0, r3, c6, c0, 0 @ clock configuration, turbo mode. + mcr p15, 0, r4, c15, c1, 0 @ CP access reg + mcr p15, 0, r5, c13, c0, 0 @ PID + mcr p15, 0, r6, c3, c0, 0 @ domain ID + mcr p15, 0, r7, c2, c0, 0 @ translation table base addr + mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg + + @ temporarily map resume_turn_on_mmu into the page table, + @ otherwise prefetch abort occurs after MMU is turned on + mov r1, r7 + bic r1, r1, #0x00ff + bic r1, r1, #0x3f00 + ldr r2, =0x542e + + adr r3, resume_turn_on_mmu + mov r3, r3, lsr #20 + orr r4, r2, r3, lsl #20 + ldr r5, [r1, r3, lsl #2] + str r4, [r1, r3, lsl #2] + + @ Mapping page table address in the page table + mov r6, r1, lsr #20 + orr r7, r2, r6, lsl #20 + ldr r8, [r1, r6, lsl #2] + str r7, [r1, r6, lsl #2] + + ldr r2, =pxa3xx_resume_after_mmu @ absolute virtual address + b resume_turn_on_mmu @ cache align execution + + .text +pxa3xx_resume_after_mmu: + /* restore the temporary mapping */ + str r5, [r1, r3, lsl #2] + str r8, [r1, r6, lsl #2] + b resume_after_mmu + +#endif /* CONFIG_PXA3xx */ + #ifdef CONFIG_PXA27x /* * pxa27x_cpu_suspend() diff --git a/include/asm-arm/arch-pxa/pxa3xx-regs.h b/include/asm-arm/arch-pxa/pxa3xx-regs.h index 66d54119757c..8e1b3ead827f 100644 --- a/include/asm-arm/arch-pxa/pxa3xx-regs.h +++ b/include/asm-arm/arch-pxa/pxa3xx-regs.h @@ -12,6 +12,19 @@ #ifndef __ASM_ARCH_PXA3XX_REGS_H #define __ASM_ARCH_PXA3XX_REGS_H +/* + * Service Power Management Unit (MPMU) + */ +#define PMCR __REG(0x40F50000) /* Power Manager Control Register */ +#define PSR __REG(0x40F50004) /* Power Manager S2 Status Register */ +#define PSPR __REG(0x40F50008) /* Power Manager Scratch Pad Register */ +#define PCFR __REG(0x40F5000C) /* Power Manager General Configuration Register */ +#define PWER __REG(0x40F50010) /* Power Manager Wake-up Enable Register */ +#define PWSR __REG(0x40F50014) /* Power Manager Wake-up Status Register */ +#define PECR __REG(0x40F50018) /* Power Manager EXT_WAKEUP[1:0] Control Register */ +#define DCDCSR __REG(0x40F50080) /* DC-DC Controller Status Register */ +#define PVCR __REG(0x40F50100) /* Power Manager Voltage Change Control Register */ +#define PCMD(x) __REG(0x40F50110 + ((x) << 2)) /* * Slave Power Managment Unit |
