diff options
-rw-r--r-- | Documentation/devicetree/bindings/ata/exynos-sata-phy.txt | 14 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/ata/exynos-sata.txt | 17 | ||||
-rw-r--r-- | arch/arm/boot/dts/exynos5250-smdk5250.dts | 15 | ||||
-rw-r--r-- | arch/arm/boot/dts/exynos5250.dtsi | 18 | ||||
-rw-r--r-- | arch/arm/mach-exynos/mach-exynos5-dt.c | 6 |
5 files changed, 70 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt b/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt new file mode 100644 index 000000000000..37824fac688e --- /dev/null +++ b/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt @@ -0,0 +1,14 @@ +* Samsung SATA PHY Controller + +SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers. +Each SATA PHY controller should have its own node. + +Required properties: +- compatible : compatible list, contains "samsung,exynos5-sata-phy" +- reg : <registers mapping> + +Example: + sata@ffe07000 { + compatible = "samsung,exynos5-sata-phy"; + reg = <0xffe07000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/ata/exynos-sata.txt b/Documentation/devicetree/bindings/ata/exynos-sata.txt new file mode 100644 index 000000000000..0849f1025e34 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/exynos-sata.txt @@ -0,0 +1,17 @@ +* Samsung AHCI SATA Controller + +SATA nodes are defined to describe on-chip Serial ATA controllers. +Each SATA controller should have its own node. + +Required properties: +- compatible : compatible list, contains "samsung,exynos5-sata" +- interrupts : <interrupt mapping for SATA IRQ> +- reg : <registers mapping> +- samsung,sata-freq : <frequency in MHz> + +Example: + sata@ffe08000 { + compatible = "samsung,exynos5-sata"; + reg = <0xffe08000 0x1000>; + interrupts = <115>; + }; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 21d4ccdb0a5a..3f8c2ab1d038 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -55,6 +55,21 @@ }; }; + i2c@121D0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <40000>; + samsung,i2c-slave-addr = <0x38>; + + sata-phy { + compatible = "samsung,sata-phy"; + reg = <0x38>; + }; + }; + + sata@122F0000 { + samsung,sata-freq = <66>; + }; + i2c@12C80000 { status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 670dfdb01a09..e913525a4814 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -104,6 +104,17 @@ interrupts = <0 54 0>; }; + sata@122F0000 { + compatible = "samsung,exynos5-sata-ahci"; + reg = <0x122F0000 0x1ff>; + interrupts = <0 115 0>; + }; + + sata-phy@12170000 { + compatible = "samsung,exynos5-sata-phy"; + reg = <0x12170000 0x1ff>; + }; + i2c@12C60000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C60000 0x100>; @@ -168,6 +179,13 @@ #size-cells = <0>; }; + i2c@121D0000 { + compatible = "samsung,exynos5-sata-phy-i2c"; + reg = <0x121D0000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + }; + spi_0: spi@12d20000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d20000 0x100>; diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index 4c0f3369abdf..a88c19f5efcc 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -64,6 +64,12 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { "exynos4210-spi.1", NULL), OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2, "exynos4210-spi.2", NULL), + OF_DEV_AUXDATA("samsung,exynos5-sata-ahci", 0x122F0000, + "exynos5-sata", NULL), + OF_DEV_AUXDATA("samsung,exynos5-sata-phy", 0x12170000, + "exynos5-sata-phy", NULL), + OF_DEV_AUXDATA("samsung,exynos5-sata-phy-i2c", 0x121D0000, + "exynos5-sata-phy-i2c", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL), |