diff options
| -rw-r--r-- | include/asm-sh/edosk7705.h | 30 | ||||
| -rw-r--r-- | include/asm-sh/hp6xx.h | 80 | ||||
| -rw-r--r-- | include/asm-sh/hs7751rvoip.h | 54 | ||||
| -rw-r--r-- | include/asm-sh/r7780rp.h | 173 | ||||
| -rw-r--r-- | include/asm-sh/rts7751r2d.h | 74 | ||||
| -rw-r--r-- | include/asm-sh/shmin.h | 9 |
6 files changed, 420 insertions, 0 deletions
diff --git a/include/asm-sh/edosk7705.h b/include/asm-sh/edosk7705.h new file mode 100644 index 000000000000..a1089a65bc36 --- /dev/null +++ b/include/asm-sh/edosk7705.h @@ -0,0 +1,30 @@ +/* + * include/asm-sh/edosk7705/io.h + * + * Modified version of io_se.h for the EDOSK7705 specific functions. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * IO functions for an Hitachi EDOSK7705 development board + */ + +#ifndef __ASM_SH_EDOSK7705_IO_H +#define __ASM_SH_EDOSK7705_IO_H + +#include <asm/io_generic.h> + +extern unsigned char sh_edosk7705_inb(unsigned long port); +extern unsigned int sh_edosk7705_inl(unsigned long port); + +extern void sh_edosk7705_outb(unsigned char value, unsigned long port); +extern void sh_edosk7705_outl(unsigned int value, unsigned long port); + +extern void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count); +extern void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count); +extern void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count); +extern void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count); + +extern unsigned long sh_edosk7705_isa_port2addr(unsigned long offset); + +#endif /* __ASM_SH_EDOSK7705_IO_H */ diff --git a/include/asm-sh/hp6xx.h b/include/asm-sh/hp6xx.h new file mode 100644 index 000000000000..f35134c159dd --- /dev/null +++ b/include/asm-sh/hp6xx.h @@ -0,0 +1,80 @@ +#ifndef __ASM_SH_HP6XX_H +#define __ASM_SH_HP6XX_H + +/* + * Copyright (C) 2003, 2004, 2005 Andriy Skulysh + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#define HP680_BTN_IRQ IRQ0_IRQ +#define HP680_TS_IRQ IRQ3_IRQ +#define HP680_HD64461_IRQ IRQ4_IRQ + +#define DAC_LCD_BRIGHTNESS 0 +#define DAC_SPEAKER_VOLUME 1 + +#define PGDR_OPENED 0x01 +#define PGDR_MAIN_BATTERY_OUT 0x04 +#define PGDR_PLAY_BUTTON 0x08 +#define PGDR_REWIND_BUTTON 0x10 +#define PGDR_RECORD_BUTTON 0x20 + +#define PHDR_TS_PEN_DOWN 0x08 + +#define PJDR_LED_BLINK 0x02 + +#define PKDR_LED_GREEN 0x10 + +#define SCPDR_TS_SCAN_ENABLE 0x20 +#define SCPDR_TS_SCAN_Y 0x02 +#define SCPDR_TS_SCAN_X 0x01 + +#define SCPCR_TS_ENABLE 0x405 +#define SCPCR_TS_MASK 0xc0f + +#define ADC_CHANNEL_TS_Y 1 +#define ADC_CHANNEL_TS_X 2 +#define ADC_CHANNEL_BATTERY 3 +#define ADC_CHANNEL_BACKUP 4 +#define ADC_CHANNEL_CHARGE 5 + +#define HD64461_GPADR_SPEAKER 0x01 +#define HD64461_GPADR_PCMCIA0 (0x02|0x08) + +#define HD64461_GPBDR_LCDOFF 0x01 +#define HD64461_GPBDR_LCD_CONTRAST_MASK 0x78 +#define HD64461_GPBDR_LED_RED 0x80 + +#include <asm/hd64461.h> +#include <asm/io.h> + +#define PJDR 0xa4000130 +#define PKDR 0xa4000132 + +static inline void hp6xx_led_red(int on) +{ + u16 v16; + v16 = ctrl_inw(CONFIG_HD64461_IOBASE + HD64461_GPBDR - 0x10000); + if (on) + ctrl_outw(v16 & (~HD64461_GPBDR_LED_RED), CONFIG_HD64461_IOBASE + HD64461_GPBDR - 0x10000); + else + ctrl_outw(v16 | HD64461_GPBDR_LED_RED, CONFIG_HD64461_IOBASE + HD64461_GPBDR - 0x10000); +} + +static inline void hp6xx_led_green(int on) +{ + u8 v8; + + v8 = ctrl_inb(PKDR); + if (on) + ctrl_outb(v8 & (~PKDR_LED_GREEN), PKDR); + else + ctrl_outb(v8 | PKDR_LED_GREEN, PKDR); +} + + +#endif /* __ASM_SH_HP6XX_H */ diff --git a/include/asm-sh/hs7751rvoip.h b/include/asm-sh/hs7751rvoip.h new file mode 100644 index 000000000000..c4cff9d33927 --- /dev/null +++ b/include/asm-sh/hs7751rvoip.h @@ -0,0 +1,54 @@ +#ifndef __ASM_SH_RENESAS_HS7751RVOIP_H +#define __ASM_SH_RENESAS_HS7751RVOIP_H + +/* + * linux/include/asm-sh/hs7751rvoip/hs7751rvoip.h + * + * Copyright (C) 2000 Atom Create Engineering Co., Ltd. + * + * Renesas Technology Sales HS7751RVoIP support + */ + +/* Box specific addresses. */ + +#define PA_BCR 0xa4000000 /* FPGA */ +#define PA_SLICCNTR1 0xa4000006 /* SLIC PIO Control 1 */ +#define PA_SLICCNTR2 0xa4000008 /* SLIC PIO Control 2 */ +#define PA_DMACNTR 0xa400000a /* USB DMA Control */ +#define PA_INPORTR 0xa400000c /* Input Port Register */ +#define PA_OUTPORTR 0xa400000e /* Output Port Reguster */ +#define PA_VERREG 0xa4000014 /* FPGA Version Register */ + +#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */ + +#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ +#define IRLCNTR2 (PA_BCR + 2) /* Interrupt Control Register2 */ +#define IRLCNTR3 (PA_BCR + 4) /* Interrupt Control Register3 */ +#define IRLCNTR4 (PA_BCR + 16) /* Interrupt Control Register4 */ +#define IRLCNTR5 (PA_BCR + 18) /* Interrupt Control Register5 */ + +#define IRQ_PCIETH 6 /* PCI Ethernet IRQ */ +#define IRQ_PCIHUB 7 /* PCI Ethernet Hub IRQ */ +#define IRQ_USBCOM 8 /* USB Comunication IRQ */ +#define IRQ_USBCON 9 /* USB Connect IRQ */ +#define IRQ_USBDMA 10 /* USB DMA IRQ */ +#define IRQ_CFCARD 11 /* CF Card IRQ */ +#define IRQ_PCMCIA 12 /* PCMCIA IRQ */ +#define IRQ_PCISLOT 13 /* PCI Slot #1 IRQ */ +#define IRQ_ONHOOK1 0 /* ON HOOK1 IRQ */ +#define IRQ_OFFHOOK1 1 /* OFF HOOK1 IRQ */ +#define IRQ_ONHOOK2 2 /* ON HOOK2 IRQ */ +#define IRQ_OFFHOOK2 3 /* OFF HOOK2 IRQ */ +#define IRQ_RINGING 4 /* Ringing IRQ */ +#define IRQ_CODEC 5 /* CODEC IRQ */ + +#define __IO_PREFIX hs7751rvoip +#include <asm/io_generic.h> + +/* arch/sh/boards/renesas/hs7751rvoip/irq.c */ +void init_hs7751rvoip_IRQ(void); + +/* arch/sh/boards/renesas/hs7751rvoip/io.c */ +void *hs7751rvoip_ioremap(unsigned long, unsigned long); + +#endif /* __ASM_SH_RENESAS_HS7751RVOIP */ diff --git a/include/asm-sh/r7780rp.h b/include/asm-sh/r7780rp.h new file mode 100644 index 000000000000..ddd67b60bb43 --- /dev/null +++ b/include/asm-sh/r7780rp.h @@ -0,0 +1,173 @@ +#ifndef __ASM_SH_RENESAS_R7780RP_H +#define __ASM_SH_RENESAS_R7780RP_H + +/* + * linux/include/asm-sh/r7780rp.h + * + * Copyright (C) 2000 Atom Create Engineering Co., Ltd. + * + * Renesas Solutions Highlander R7780RP support + */ + +/* Box specific addresses. */ +#if defined(CONFIG_SH_R7780MP) +#define PA_BCR 0xa4000000 /* FPGA */ +#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */ +#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */ +#define PA_IRLPRI1 (PA_BCR+0x0004) /* Interrupt Priorty 1 */ +#define PA_IRLPRI2 (PA_BCR+0x0006) /* Interrupt Priorty 2 */ +#define PA_IRLPRI3 (PA_BCR+0x0008) /* Interrupt Priorty 3 */ +#define PA_IRLPRI4 (PA_BCR+0x000a) /* Interrupt Priorty 4 */ +#define PA_RSTCTL (PA_BCR+0x000c) /* Reset Control */ +#define PA_PCIBD (PA_BCR+0x000e) /* PCI Board detect control */ +#define PA_PCICD (PA_BCR+0x0010) /* PCI Conector detect control */ +#define PA_EXTGIO (PA_BCR+0x0016) /* Extension GPIO Control */ +#define PA_IVDRMON (PA_BCR+0x0018) /* iVDR Moniter control */ +#define PA_IVDRCTL (PA_BCR+0x001a) /* iVDR control */ +#define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */ +#define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */ +#define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */ +#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */ +#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */ +#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */ +#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */ +#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */ +#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */ +#define PA_DBSW (PA_BCR+0x0200) /* Debug Board Switch control */ +#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */ +#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */ +#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */ +#define PA_SCSMR0 (PA_BCR+0x0400) /* SCIF0 Serial mode control */ +#define PA_SCBRR0 (PA_BCR+0x0404) /* SCIF0 Bit rate control */ +#define PA_SCSCR0 (PA_BCR+0x0408) /* SCIF0 Serial control */ +#define PA_SCFTDR0 (PA_BCR+0x040c) /* SCIF0 Send FIFO control */ +#define PA_SCFSR0 (PA_BCR+0x0410) /* SCIF0 Serial status control */ +#define PA_SCFRDR0 (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */ +#define PA_SCFCR0 (PA_BCR+0x0418) /* SCIF0 FIFO control */ +#define PA_SCTFDR0 (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */ +#define PA_SCRFDR0 (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */ +#define PA_SCSPTR0 (PA_BCR+0x0424) /* SCIF0 Serial Port control */ +#define PA_SCLSR0 (PA_BCR+0x0428) /* SCIF0 Line Status control */ +#define PA_SCRER0 (PA_BCR+0x042c) /* SCIF0 Serial Error control */ +#define PA_SCSMR1 (PA_BCR+0x0500) /* SCIF1 Serial mode control */ +#define PA_SCBRR1 (PA_BCR+0x0504) /* SCIF1 Bit rate control */ +#define PA_SCSCR1 (PA_BCR+0x0508) /* SCIF1 Serial control */ +#define PA_SCFTDR1 (PA_BCR+0x050c) /* SCIF1 Send FIFO control */ +#define PA_SCFSR1 (PA_BCR+0x0510) /* SCIF1 Serial status control */ +#define PA_SCFRDR1 (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */ +#define PA_SCFCR1 (PA_BCR+0x0518) /* SCIF1 FIFO control */ +#define PA_SCTFDR1 (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */ +#define PA_SCRFDR1 (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */ +#define PA_SCSPTR1 (PA_BCR+0x0524) /* SCIF1 Serial Port control */ +#define PA_SCLSR1 (PA_BCR+0x0528) /* SCIF1 Line Status control */ +#define PA_SCRER1 (PA_BCR+0x052c) /* SCIF1 Serial Error control */ +#define PA_ICCR (PA_BCR+0x0600) /* Serial control */ +#define PA_SAR (PA_BCR+0x0602) /* Serial Slave control */ +#define PA_MDR (PA_BCR+0x0604) /* Serial Mode control */ +#define PA_ADR1 (PA_BCR+0x0606) /* Serial Address1 control */ +#define PA_DAR1 (PA_BCR+0x0646) /* Serial Data1 control */ +#define PA_VERREG (PA_BCR+0x0700) /* FPGA Version Register */ +#define PA_POFF (PA_BCR+0x0800) /* System Power Off control */ +#define PA_PMR (PA_BCR+0x0900) /* */ + +#define PA_AX88796L 0xa4100400 /* AX88796L Area */ +#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */ +#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */ +#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */ + +#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ + +#define IRQ_PCISLOT1 65 /* PCI Slot #1 IRQ */ +#define IRQ_PCISLOT2 66 /* PCI Slot #2 IRQ */ +#define IRQ_PCISLOT3 67 /* PCI Slot #3 IRQ */ +#define IRQ_PCISLOT4 68 /* PCI Slot #4 IRQ */ +#define IRQ_CFCARD 1 /* CF Card IRQ */ +// #define IRQ_CFINST 0 /* CF Card Insert IRQ */ +#define IRQ_TP 2 /* Touch Panel IRQ */ +#define IRQ_SCI1 3 /* SCI1 IRQ */ +#define IRQ_SCI0 4 /* SCI0 IRQ */ +#define IRQ_2SERIAL 5 /* Serial IRQ */ +#define IRQ_RTC 6 /* RTC A / B IRQ */ +#define IRQ_EXTENTION6 7 /* EXT6n IRQ */ +#define IRQ_EXTENTION5 8 /* EXT5n IRQ */ +#define IRQ_EXTENTION4 9 /* EXT4n IRQ */ +#define IRQ_EXTENTION2 10 /* EXT2n IRQ */ +#define IRQ_EXTENTION1 11 /* EXT1n IRQ */ +#define IRQ_ONETH 13 /* On board Ethernet IRQ */ +#define IRQ_PSW 14 /* Push Switch IRQ */ + +#else /* R7780RP */ + +#define PA_BCR 0xa5000000 /* FPGA */ +#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */ +#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */ +#define PA_SDPOW (PA_BCR+0x0004) /* SD Power control */ +#define PA_RSTCTL (PA_BCR+0x0006) /* Device Reset control */ +#define PA_PCIBD (PA_BCR+0x0008) /* PCI Board detect control */ +#define PA_PCICD (PA_BCR+0x000a) /* PCI Conector detect control */ +#define PA_ZIGIO1 (PA_BCR+0x000c) /* Zigbee IO control 1 */ +#define PA_ZIGIO2 (PA_BCR+0x000e) /* Zigbee IO control 2 */ +#define PA_ZIGIO3 (PA_BCR+0x0010) /* Zigbee IO control 3 */ +#define PA_ZIGIO4 (PA_BCR+0x0012) /* Zigbee IO control 4 */ +#define PA_IVDRMON (PA_BCR+0x0014) /* iVDR Moniter control */ +#define PA_IVDRCTL (PA_BCR+0x0016) /* iVDR control */ +#define PA_OBLED (PA_BCR+0x0018) /* On Board LED control */ +#define PA_OBSW (PA_BCR+0x001a) /* On Board Switch control */ +#define PA_AUDIOSEL (PA_BCR+0x001c) /* Sound Interface Select control */ +#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */ +#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */ +#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */ +#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */ +#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */ +#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */ +#define PA_DBDET (PA_BCR+0x0200) /* Debug Board detect control */ +#define PA_DBDISPCTL (PA_BCR+0x0202) /* Debug Board Dot timing control */ +#define PA_DBSW (PA_BCR+0x0204) /* Debug Board Switch control */ +#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */ +#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */ +#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */ +#define PA_SCSMR (PA_BCR+0x0400) /* SCIF Serial mode control */ +#define PA_SCBRR (PA_BCR+0x0402) /* SCIF Bit rate control */ +#define PA_SCSCR (PA_BCR+0x0404) /* SCIF Serial control */ +#define PA_SCFDTR (PA_BCR+0x0406) /* SCIF Send FIFO control */ +#define PA_SCFSR (PA_BCR+0x0408) /* SCIF Serial status control */ +#define PA_SCFRDR (PA_BCR+0x040a) /* SCIF Receive FIFO control */ +#define PA_SCFCR (PA_BCR+0x040c) /* SCIF FIFO control */ +#define PA_SCFDR (PA_BCR+0x040e) /* SCIF FIFO data control */ +#define PA_SCLSR (PA_BCR+0x0412) /* SCIF Line Status control */ +#define PA_ICCR (PA_BCR+0x0500) /* Serial control */ +#define PA_SAR (PA_BCR+0x0502) /* Serial Slave control */ +#define PA_MDR (PA_BCR+0x0504) /* Serial Mode control */ +#define PA_ADR1 (PA_BCR+0x0506) /* Serial Address1 control */ +#define PA_DAR1 (PA_BCR+0x0546) /* Serial Data1 control */ +#define PA_VERREG (PA_BCR+0x0600) /* FPGA Version Register */ + +#define PA_AX88796L 0xa5800400 /* AX88796L Area */ +#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */ +#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */ +#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */ + +#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ + +#define IRQ_PCISLOT1 0 /* PCI Slot #1 IRQ */ +#define IRQ_PCISLOT2 1 /* PCI Slot #2 IRQ */ +#define IRQ_PCISLOT3 2 /* PCI Slot #3 IRQ */ +#define IRQ_PCISLOT4 3 /* PCI Slot #4 IRQ */ +#define IRQ_CFCARD 4 /* CF Card IRQ */ +#define IRQ_CFINST 5 /* CF Card Insert IRQ */ +#define IRQ_M66596 6 /* M66596 IRQ */ +#define IRQ_SDCARD 7 /* SD Card IRQ */ +#define IRQ_TUCHPANEL 8 /* Touch Panel IRQ */ +#define IRQ_SCI 9 /* SCI IRQ */ +#define IRQ_2SERIAL 10 /* Serial IRQ */ +#define IRQ_EXTENTION 11 /* EXTn IRQ */ +#define IRQ_ONETH 12 /* On board Ethernet IRQ */ +#define IRQ_PSW 13 /* Push Switch IRQ */ +#define IRQ_ZIGBEE 14 /* Ziggbee IO IRQ */ + +#endif /* CONFIG_SH_R7780MP */ + +#define __IO_PREFIX r7780rp +#include <asm/io_generic.h> + +#endif /* __ASM_SH_RENESAS_R7780RP */ diff --git a/include/asm-sh/rts7751r2d.h b/include/asm-sh/rts7751r2d.h new file mode 100644 index 000000000000..796b8fcb81a8 --- /dev/null +++ b/include/asm-sh/rts7751r2d.h @@ -0,0 +1,74 @@ +#ifndef __ASM_SH_RENESAS_RTS7751R2D_H +#define __ASM_SH_RENESAS_RTS7751R2D_H + +/* + * linux/include/asm-sh/renesas_rts7751r2d.h + * + * Copyright (C) 2000 Atom Create Engineering Co., Ltd. + * + * Renesas Technology Sales RTS7751R2D support + */ + +/* Box specific addresses. */ + +#define PA_BCR 0xa4000000 /* FPGA */ +#define PA_IRLMON 0xa4000002 /* Interrupt Status control */ +#define PA_CFCTL 0xa4000004 /* CF Timing control */ +#define PA_CFPOW 0xa4000006 /* CF Power control */ +#define PA_DISPCTL 0xa4000008 /* Display Timing control */ +#define PA_SDMPOW 0xa400000a /* SD Power control */ +#define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */ +#define PA_PCICD 0xa400000e /* PCI Extention detect control */ +#define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */ +#if defined(CONFIG_RTS7751R2D_REV11) +#define PA_AXRST 0xa4000022 /* AX_LAN Reset control */ +#define PA_CFRST 0xa4000024 /* CF Reset control */ +#define PA_ADMRTS 0xa4000026 /* SD Reset control */ +#define PA_EXTRST 0xa4000028 /* Extention Reset control */ +#define PA_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */ +#else +#define PA_CFRST 0xa4000022 /* CF Reset control */ +#define PA_ADMRTS 0xa4000024 /* SD Reset control */ +#define PA_EXTRST 0xa4000026 /* Extention Reset control */ +#define PA_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */ +#define PA_KEYCTLCLR 0xa400002a /* Key Interrupt clear */ +#endif +#define PA_POWOFF 0xa4000030 /* Board Power OFF control */ +#define PA_VERREG 0xa4000032 /* FPGA Version Register */ +#define PA_INPORT 0xa4000034 /* KEY Input Port control */ +#define PA_OUTPORT 0xa4000036 /* LED control */ +#define PA_DMPORT 0xa4000038 /* DM270 Output Port control */ + +#define PA_AX88796L 0xaa000400 /* AX88796L Area */ +#define PA_VOYAGER 0xab000000 /* VOYAGER GX Area */ +#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */ +#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */ + +#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ + +#if defined(CONFIG_RTS7751R2D_REV11) +#define IRQ_PCIETH 0 /* PCI Ethernet IRQ */ +#define IRQ_CFCARD 1 /* CF Card IRQ */ +#define IRQ_CFINST 2 /* CF Card Insert IRQ */ +#define IRQ_PCMCIA 3 /* PCMCIA IRQ */ +#define IRQ_VOYAGER 4 /* VOYAGER IRQ */ +#define IRQ_ONETH 5 /* On board Ethernet IRQ */ +#else +#define IRQ_KEYIN 0 /* Key Input IRQ */ +#define IRQ_PCIETH 1 /* PCI Ethernet IRQ */ +#define IRQ_CFCARD 2 /* CF Card IRQ */ +#define IRQ_CFINST 3 /* CF Card Insert IRQ */ +#define IRQ_PCMCIA 4 /* PCMCIA IRQ */ +#define IRQ_VOYAGER 5 /* VOYAGER IRQ */ +#endif +#define IRQ_RTCALM 6 /* RTC Alarm IRQ */ +#define IRQ_RTCTIME 7 /* RTC Timer IRQ */ +#define IRQ_SDCARD 8 /* SD Card IRQ */ +#define IRQ_PCISLOT1 9 /* PCI Slot #1 IRQ */ +#define IRQ_PCISLOT2 10 /* PCI Slot #2 IRQ */ +#define IRQ_EXTENTION 11 /* EXTn IRQ */ + +#define __IO_PREFIX rts7751r2d +#include <asm/io_generic.h> + +#endif /* __ASM_SH_RENESAS_RTS7751R2D */ diff --git a/include/asm-sh/shmin.h b/include/asm-sh/shmin.h new file mode 100644 index 000000000000..36ba138a81fb --- /dev/null +++ b/include/asm-sh/shmin.h @@ -0,0 +1,9 @@ +#ifndef __ASM_SH_SHMIN_H +#define __ASM_SH_SHMIN_H + +#define SHMIN_IO_BASE 0xb0000000UL + +#define SHMIN_NE_IRQ IRQ2_IRQ +#define SHMIN_NE_BASE 0x300 + +#endif |
