summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS2
-rw-r--r--arch/x86/kernel/cpu/cpufreq/Kconfig4
-rw-r--r--arch/x86/kernel/cpu/cpufreq/elanfreq.c2
-rw-r--r--arch/x86/kernel/cpu/cpufreq/powernow-k8.c112
-rw-r--r--arch/x86/kernel/cpu/cpufreq/powernow-k8.h3
-rw-r--r--drivers/cpufreq/cpufreq_conservative.c20
6 files changed, 89 insertions, 54 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 5084539347f1..41d7a1ed03d1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1249,7 +1249,7 @@ S: Maintained
CPU FREQUENCY DRIVERS
P: Dave Jones
M: davej@codemonkey.org.uk
-L: cpufreq@lists.linux.org.uk
+L: cpufreq@vger.kernel.org
W: http://www.codemonkey.org.uk/projects/cpufreq/
T: git kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
S: Maintained
diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig
index cb7a5715596d..efae3b22a0ff 100644
--- a/arch/x86/kernel/cpu/cpufreq/Kconfig
+++ b/arch/x86/kernel/cpu/cpufreq/Kconfig
@@ -235,9 +235,9 @@ config X86_LONGHAUL
If in doubt, say N.
config X86_E_POWERSAVER
- tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)"
+ tristate "VIA C7 Enhanced PowerSaver"
select CPU_FREQ_TABLE
- depends on X86_32 && EXPERIMENTAL
+ depends on X86_32
help
This adds the CPUFreq driver for VIA C7 processors.
diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
index 94619c22f563..e4a4bf870e94 100644
--- a/arch/x86/kernel/cpu/cpufreq/elanfreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
@@ -44,7 +44,7 @@ struct s_elan_multiplier {
* It is important that the frequencies
* are listed in ascending order here!
*/
-struct s_elan_multiplier elan_multiplier[] = {
+static struct s_elan_multiplier elan_multiplier[] = {
{1000, 0x02, 0x18},
{2000, 0x02, 0x10},
{4000, 0x02, 0x08},
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index c45ca6d4dce1..4e7271999a74 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -66,7 +66,6 @@ static u32 find_freq_from_fid(u32 fid)
return 800 + (fid * 100);
}
-
/* Return a frequency in KHz, given an input fid */
static u32 find_khz_freq_from_fid(u32 fid)
{
@@ -78,7 +77,6 @@ static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, u32 p
return data[pstate].frequency;
}
-
/* Return the vco fid for an input fid
*
* Each "low" fid has corresponding "high" fid, and you can get to "low" fids
@@ -166,7 +164,6 @@ static void fidvid_msr_init(void)
wrmsr(MSR_FIDVID_CTL, lo, hi);
}
-
/* write the new fid value along with the other control fields to the msr */
static int write_new_fid(struct powernow_k8_data *data, u32 fid)
{
@@ -740,44 +737,63 @@ static int find_psb_table(struct powernow_k8_data *data)
#ifdef CONFIG_X86_POWERNOW_K8_ACPI
static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index)
{
- if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE))
+ if (!data->acpi_data->state_count || (cpu_family == CPU_HW_PSTATE))
return;
- data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK;
- data->rvo = (data->acpi_data.states[index].control >> RVO_SHIFT) & RVO_MASK;
- data->exttype = (data->acpi_data.states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK;
- data->plllock = (data->acpi_data.states[index].control >> PLL_L_SHIFT) & PLL_L_MASK;
- data->vidmvs = 1 << ((data->acpi_data.states[index].control >> MVS_SHIFT) & MVS_MASK);
- data->vstable = (data->acpi_data.states[index].control >> VST_SHIFT) & VST_MASK;
+ data->irt = (data->acpi_data->states[index].control >> IRT_SHIFT) & IRT_MASK;
+ data->rvo = (data->acpi_data->states[index].control >> RVO_SHIFT) & RVO_MASK;
+ data->exttype = (data->acpi_data->states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK;
+ data->plllock = (data->acpi_data->states[index].control >> PLL_L_SHIFT) & PLL_L_MASK;
+ data->vidmvs = 1 << ((data->acpi_data->states[index].control >> MVS_SHIFT) & MVS_MASK);
+ data->vstable = (data->acpi_data->states[index].control >> VST_SHIFT) & VST_MASK;
+}
+
+
+static struct acpi_processor_performance *acpi_perf_data;
+static int preregister_valid;
+
+static int powernow_k8_cpu_preinit_acpi(void)
+{
+ acpi_perf_data = alloc_percpu(struct acpi_processor_performance);
+ if (!acpi_perf_data)
+ return -ENODEV;
+
+ if (acpi_processor_preregister_performance(acpi_perf_data))
+ return -ENODEV;
+ else
+ preregister_valid = 1;
+ return 0;
}
static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
{
struct cpufreq_frequency_table *powernow_table;
int ret_val;
+ int cpu = 0;
- if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
+ data->acpi_data = percpu_ptr(acpi_perf_data, cpu);
+ if (acpi_processor_register_performance(data->acpi_data, data->cpu)) {
dprintk("register performance failed: bad ACPI data\n");
return -EIO;
}
/* verify the data contained in the ACPI structures */
- if (data->acpi_data.state_count <= 1) {
+ if (data->acpi_data->state_count <= 1) {
dprintk("No ACPI P-States\n");
goto err_out;
}
- if ((data->acpi_data.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
- (data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
+ if ((data->acpi_data->control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
+ (data->acpi_data->status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
dprintk("Invalid control/status registers (%x - %x)\n",
- data->acpi_data.control_register.space_id,
- data->acpi_data.status_register.space_id);
+ data->acpi_data->control_register.space_id,
+ data->acpi_data->status_register.space_id);
goto err_out;
}
/* fill in data->powernow_table */
powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table)
- * (data->acpi_data.state_count + 1)), GFP_KERNEL);
+ * (data->acpi_data->state_count + 1)), GFP_KERNEL);
if (!powernow_table) {
dprintk("powernow_table memory alloc failure\n");
goto err_out;
@@ -790,12 +806,12 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
if (ret_val)
goto err_out_mem;
- powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END;
- powernow_table[data->acpi_data.state_count].index = 0;
+ powernow_table[data->acpi_data->state_count].frequency = CPUFREQ_TABLE_END;
+ powernow_table[data->acpi_data->state_count].index = 0;
data->powernow_table = powernow_table;
/* fill in data */
- data->numps = data->acpi_data.state_count;
+ data->numps = data->acpi_data->state_count;
if (first_cpu(per_cpu(cpu_core_map, data->cpu)) == data->cpu)
print_basics(data);
powernow_k8_acpi_pst_values(data, 0);
@@ -803,16 +819,31 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
/* notify BIOS that we exist */
acpi_processor_notify_smm(THIS_MODULE);
+ /* determine affinity, from ACPI if available */
+ if (preregister_valid) {
+ if ((data->acpi_data->shared_type == CPUFREQ_SHARED_TYPE_ALL) ||
+ (data->acpi_data->shared_type == CPUFREQ_SHARED_TYPE_ANY))
+ data->starting_core_affinity = data->acpi_data->shared_cpu_map;
+ else
+ data->starting_core_affinity = cpumask_of_cpu(data->cpu);
+ } else {
+ /* best guess from family if not */
+ if (cpu_family == CPU_HW_PSTATE)
+ data->starting_core_affinity = cpumask_of_cpu(data->cpu);
+ else
+ data->starting_core_affinity = per_cpu(cpu_core_map, data->cpu);
+ }
+
return 0;
err_out_mem:
kfree(powernow_table);
err_out:
- acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
+ acpi_processor_unregister_performance(data->acpi_data, data->cpu);
/* data->acpi_data.state_count informs us at ->exit() whether ACPI was used */
- data->acpi_data.state_count = 0;
+ data->acpi_data->state_count = 0;
return -ENODEV;
}
@@ -824,10 +855,10 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpuf
rdmsr(MSR_PSTATE_CUR_LIMIT, hi, lo);
data->max_hw_pstate = (hi & HW_PSTATE_MAX_MASK) >> HW_PSTATE_MAX_SHIFT;
- for (i = 0; i < data->acpi_data.state_count; i++) {
+ for (i = 0; i < data->acpi_data->state_count; i++) {
u32 index;
- index = data->acpi_data.states[i].control & HW_PSTATE_MASK;
+ index = data->acpi_data->states[i].control & HW_PSTATE_MASK;
if (index > data->max_hw_pstate) {
printk(KERN_ERR PFX "invalid pstate %d - bad value %d.\n", i, index);
printk(KERN_ERR PFX "Please report to BIOS manufacturer\n");
@@ -843,7 +874,7 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpuf
powernow_table[i].index = index;
- powernow_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000;
+ powernow_table[i].frequency = data->acpi_data->states[i].core_frequency * 1000;
}
return 0;
}
@@ -852,16 +883,16 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpuf
{
int i;
int cntlofreq = 0;
- for (i = 0; i < data->acpi_data.state_count; i++) {
+ for (i = 0; i < data->acpi_data->state_count; i++) {
u32 fid;
u32 vid;
if (data->exttype) {
- fid = data->acpi_data.states[i].status & EXT_FID_MASK;
- vid = (data->acpi_data.states[i].status >> VID_SHIFT) & EXT_VID_MASK;
+ fid = data->acpi_data->states[i].status & EXT_FID_MASK;
+ vid = (data->acpi_data->states[i].status >> VID_SHIFT) & EXT_VID_MASK;
} else {
- fid = data->acpi_data.states[i].control & FID_MASK;
- vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK;
+ fid = data->acpi_data->states[i].control & FID_MASK;
+ vid = (data->acpi_data->states[i].control >> VID_SHIFT) & VID_MASK;
}
dprintk(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
@@ -902,10 +933,10 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpuf
cntlofreq = i;
}
- if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) {
+ if (powernow_table[i].frequency != (data->acpi_data->states[i].core_frequency * 1000)) {
printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n",
powernow_table[i].frequency,
- (unsigned int) (data->acpi_data.states[i].core_frequency * 1000));
+ (unsigned int) (data->acpi_data->states[i].core_frequency * 1000));
powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
continue;
}
@@ -915,11 +946,12 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpuf
static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data)
{
- if (data->acpi_data.state_count)
- acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
+ if (data->acpi_data->state_count)
+ acpi_processor_unregister_performance(data->acpi_data, data->cpu);
}
#else
+static int powernow_k8_cpu_preinit_acpi(void) { return -ENODEV; }
static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { return -ENODEV; }
static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) { return; }
static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { return; }
@@ -1104,7 +1136,7 @@ static int powernowk8_verify(struct cpufreq_policy *pol)
static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
{
struct powernow_k8_data *data;
- cpumask_t oldmask;
+ cpumask_t oldmask = CPU_MASK_ALL;
int rc;
if (!cpu_online(pol->cpu))
@@ -1177,10 +1209,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
/* run on any CPU again */
set_cpus_allowed_ptr(current, &oldmask);
- if (cpu_family == CPU_HW_PSTATE)
- pol->cpus = cpumask_of_cpu(pol->cpu);
- else
- pol->cpus = per_cpu(cpu_core_map, pol->cpu);
+ pol->cpus = data->starting_core_affinity;
data->available_cores = &(pol->cpus);
/* Take a crude guess here.
@@ -1303,6 +1332,7 @@ static int __cpuinit powernowk8_init(void)
}
if (supported_cpus == num_online_cpus()) {
+ powernow_k8_cpu_preinit_acpi();
printk(KERN_INFO PFX "Found %d %s "
"processors (%d cpu cores) (" VERSION ")\n",
num_online_nodes(),
@@ -1319,6 +1349,10 @@ static void __exit powernowk8_exit(void)
dprintk("exit\n");
cpufreq_unregister_driver(&cpufreq_amd64_driver);
+
+#ifdef CONFIG_X86_POWERNOW_K8_ACPI
+ free_percpu(acpi_perf_data);
+#endif
}
MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com>");
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
index ab48cfed4d96..a62612cd4be8 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
@@ -33,12 +33,13 @@ struct powernow_k8_data {
#ifdef CONFIG_X86_POWERNOW_K8_ACPI
/* the acpi table needs to be kept. it's only available if ACPI was
* used to determine valid frequency/vid/fid states */
- struct acpi_processor_performance acpi_data;
+ struct acpi_processor_performance *acpi_data;
#endif
/* we need to keep track of associated cores, but let cpufreq
* handle hotplug events - so just point at cpufreq pol->cpus
* structure */
cpumask_t *available_cores;
+ cpumask_t starting_core_affinity;
};
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index fe565ee43757..ac0bbf2d234f 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -333,7 +333,7 @@ static void dbs_check_cpu(int cpu)
{
unsigned int idle_ticks, up_idle_ticks, down_idle_ticks;
unsigned int tmp_idle_ticks, total_idle_ticks;
- unsigned int freq_step;
+ unsigned int freq_target;
unsigned int freq_down_sampling_rate;
struct cpu_dbs_info_s *this_dbs_info = &per_cpu(cpu_dbs_info, cpu);
struct cpufreq_policy *policy;
@@ -383,13 +383,13 @@ static void dbs_check_cpu(int cpu)
if (this_dbs_info->requested_freq == policy->max)
return;
- freq_step = (dbs_tuners_ins.freq_step * policy->max) / 100;
+ freq_target = (dbs_tuners_ins.freq_step * policy->max) / 100;
/* max freq cannot be less than 100. But who knows.... */
- if (unlikely(freq_step == 0))
- freq_step = 5;
+ if (unlikely(freq_target == 0))
+ freq_target = 5;
- this_dbs_info->requested_freq += freq_step;
+ this_dbs_info->requested_freq += freq_target;
if (this_dbs_info->requested_freq > policy->max)
this_dbs_info->requested_freq = policy->max;
@@ -425,19 +425,19 @@ static void dbs_check_cpu(int cpu)
/*
* if we are already at the lowest speed then break out early
* or if we 'cannot' reduce the speed as the user might want
- * freq_step to be zero
+ * freq_target to be zero
*/
if (this_dbs_info->requested_freq == policy->min
|| dbs_tuners_ins.freq_step == 0)
return;
- freq_step = (dbs_tuners_ins.freq_step * policy->max) / 100;
+ freq_target = (dbs_tuners_ins.freq_step * policy->max) / 100;
/* max freq cannot be less than 100. But who knows.... */
- if (unlikely(freq_step == 0))
- freq_step = 5;
+ if (unlikely(freq_target == 0))
+ freq_target = 5;
- this_dbs_info->requested_freq -= freq_step;
+ this_dbs_info->requested_freq -= freq_target;
if (this_dbs_info->requested_freq < policy->min)
this_dbs_info->requested_freq = policy->min;
OpenPOWER on IntegriCloud