summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/boot/dts/aspeed-ast2500-evb.dts14
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts4
-rw-r--r--arch/arm/boot/dts/aspeed-g4.dtsi26
-rw-r--r--arch/arm/boot/dts/aspeed-g5.dtsi34
4 files changed, 65 insertions, 13 deletions
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index ede11c597673..2375449c02d0 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -80,20 +80,20 @@
};
};
-&ehci0 {
+/*
+ * Enable port A as device (via the virtual hub) and port B as
+ * host by default on the eval board. This can be easily changed
+ * by replacing the override below with &ehci0 { ... } to enable
+ * host on both ports.
+ */
+&vhub {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb2ah_default>;
};
&ehci1 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb2bh_default>;
};
&uhci {
status = "okay";
-
- /* No pinctrl, this follows the above EHCI settings */
};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index 389f5f83bef9..9176b3cda812 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -21,9 +21,9 @@
#size-cells = <1>;
ranges;
- vga_memory: framebuffer@bf000000 {
+ vga_memory: framebuffer@9f000000 {
no-map;
- reg = <0xbf000000 0x01000000>; /* 16M */
+ reg = <0x9f000000 0x01000000>; /* 16M */
};
flash_memory: region@98000000 {
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 75df1573380e..b23a983f95a5 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -92,6 +92,12 @@
reg = <0x1e6c0080 0x80>;
};
+ cvic: copro-interrupt-controller@1e6c2000 {
+ compatible = "aspeed,ast2400-cvic", "aspeed-cvic";
+ valid-sources = <0x7fffffff>;
+ reg = <0x1e6c2000 0x80>;
+ };
+
mac0: ethernet@1e660000 {
compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
reg = <0x1e660000 0x180>;
@@ -113,6 +119,8 @@
reg = <0x1e6a1000 0x100>;
interrupts = <5>;
clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2h_default>;
status = "disabled";
};
@@ -123,6 +131,20 @@
#ports = <3>;
clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
status = "disabled";
+ /*
+ * No default pinmux, it will follow EHCI, use an explicit pinmux
+ * override if you don't enable EHCI
+ */
+ };
+
+ vhub: usb-vhub@1e6a0000 {
+ compatible = "aspeed,ast2400-usb-vhub";
+ reg = <0x1e6a0000 0x300>;
+ interrupts = <5>;
+ clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2d_default>;
+ status = "disabled";
};
apb {
@@ -161,7 +183,7 @@
status = "disabled";
};
- sram@1e720000 {
+ sram: sram@1e720000 {
compatible = "mmio-sram";
reg = <0x1e720000 0x8000>; // 32K
};
@@ -224,7 +246,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1e786000 0x1000>;
- clocks = <&syscon ASPEED_CLK_APB>;
+ clocks = <&syscon ASPEED_CLK_24M>;
resets = <&syscon ASPEED_RESET_PWM>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 17f2714d18a7..87fdc146ff52 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -127,6 +127,13 @@
reg = <0x1e6c0080 0x80>;
};
+ cvic: copro-interrupt-controller@1e6c2000 {
+ compatible = "aspeed,ast2500-cvic", "aspeed-cvic";
+ valid-sources = <0xffffffff>;
+ copro-sw-interrupts = <1>;
+ reg = <0x1e6c2000 0x80>;
+ };
+
mac0: ethernet@1e660000 {
compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
reg = <0x1e660000 0x180>;
@@ -148,6 +155,8 @@
reg = <0x1e6a1000 0x100>;
interrupts = <5>;
clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2ah_default>;
status = "disabled";
};
@@ -156,6 +165,8 @@
reg = <0x1e6a3000 0x100>;
interrupts = <13>;
clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2bh_default>;
status = "disabled";
};
@@ -166,6 +177,20 @@
#ports = <2>;
clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
status = "disabled";
+ /*
+ * No default pinmux, it will follow EHCI, use an explicit pinmux
+ * override if you don't enable EHCI
+ */
+ };
+
+ vhub: usb-vhub@1e6a0000 {
+ compatible = "aspeed,ast2500-usb-vhub";
+ reg = <0x1e6a0000 0x300>;
+ interrupts = <5>;
+ clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2ad_default>;
+ status = "disabled";
};
apb {
@@ -211,7 +236,7 @@
status = "disabled";
};
- sram@1e720000 {
+ sram: sram@1e720000 {
compatible = "mmio-sram";
reg = <0x1e720000 0x9000>; // 36K
};
@@ -281,7 +306,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1e786000 0x1000>;
- clocks = <&syscon ASPEED_CLK_APB>;
+ clocks = <&syscon ASPEED_CLK_24M>;
resets = <&syscon ASPEED_RESET_PWM>;
status = "disabled";
};
@@ -1417,6 +1442,11 @@
groups = "USB2AH";
};
+ pinctrl_usb2ad_default: usb2ad_default {
+ function = "USB2AD";
+ groups = "USB2AD";
+ };
+
pinctrl_usb11bhid_default: usb11bhid_default {
function = "USB11BHID";
groups = "USB11BHID";
OpenPOWER on IntegriCloud