diff options
| -rw-r--r-- | arch/arm/configs/nhk8815_defconfig | 2 | ||||
| -rw-r--r-- | arch/arm/mach-nomadik/board-nhk8815.c | 64 | ||||
| -rw-r--r-- | arch/arm/mach-nomadik/include/mach/fsmc.h | 29 | ||||
| -rw-r--r-- | drivers/clk/clk-nomadik.c | 1 |
4 files changed, 30 insertions, 66 deletions
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig index 240b25eea565..86cfd2959c47 100644 --- a/arch/arm/configs/nhk8815_defconfig +++ b/arch/arm/configs/nhk8815_defconfig @@ -57,7 +57,7 @@ CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ECC_SMC=y -CONFIG_MTD_NAND_NOMADIK=y +CONFIG_MTD_NAND_FSMC=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_GENERIC=y diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index bfa1eab91f41..a105d1b79758 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -19,6 +19,7 @@ #include <linux/gpio.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> +#include <linux/mtd/fsmc.h> #include <linux/mtd/onenand.h> #include <linux/mtd/partitions.h> #include <linux/i2c.h> @@ -36,7 +37,6 @@ #include <plat/mtu.h> #include <plat/pincfg.h> -#include <linux/platform_data/mtd-nomadik-nand.h> #include <mach/fsmc.h> #include "cpu-8815.h" @@ -48,36 +48,18 @@ /* These addresses span 16MB, so use three individual pages */ static struct resource nhk8815_nand_resources[] = { { - .name = "nand_addr", - .start = NAND_IO_ADDR, - .end = NAND_IO_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .name = "nand_cmd", - .start = NAND_IO_CMD, - .end = NAND_IO_CMD + 0xfff, + .name = "nand_data", + .start = 0x40000000, + .end = 0x40000000 + SZ_16K - 1, .flags = IORESOURCE_MEM, }, { - .name = "nand_data", - .start = NAND_IO_DATA, - .end = NAND_IO_DATA + 0xfff, + .name = "fsmc_regs", + .start = NOMADIK_FSMC_BASE, + .end = NOMADIK_FSMC_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, - } + }, }; -static int nhk8815_nand_init(void) -{ - /* FSMC setup for nand chip select (8-bit nand in 8815NHK) */ - writel(0x0000000E, FSMC_PCR(0)); - writel(0x000D0A00, FSMC_PMEM(0)); - writel(0x00100A00, FSMC_PATT(0)); - - /* enable access to the chip select area */ - writel(readl(FSMC_PCR(0)) | 0x04, FSMC_PCR(0)); - - return 0; -} - /* * These partitions are the same as those used in the 2.6.20 release * shipped by the vendor; the first two partitions are mandated @@ -111,20 +93,30 @@ static struct mtd_partition nhk8815_partitions[] = { } }; -static struct nomadik_nand_platform_data nhk8815_nand_data = { - .parts = nhk8815_partitions, - .nparts = ARRAY_SIZE(nhk8815_partitions), - .options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING, - .init = nhk8815_nand_init, +static struct fsmc_nand_timings nhk8815_nand_timings = { + .thiz = 0, + .thold = 0x10, + .twait = 0x0A, + .tset = 0, +}; + +static struct fsmc_nand_platform_data nhk8815_nand_platform_data = { + .nand_timings = &nhk8815_nand_timings, + .partitions = nhk8815_partitions, + .nr_partitions = ARRAY_SIZE(nhk8815_partitions), + .width = FSMC_NAND_BW8, + .ale_off = 0x1000000, + .cle_off = 0x800000, }; static struct platform_device nhk8815_nand_device = { - .name = "nomadik_nand", - .dev = { - .platform_data = &nhk8815_nand_data, + .name = "fsmc-nand", + .id = -1, + .resource = nhk8815_nand_resources, + .num_resources = ARRAY_SIZE(nhk8815_nand_resources), + .dev = { + .platform_data = &nhk8815_nand_platform_data, }, - .resource = nhk8815_nand_resources, - .num_resources = ARRAY_SIZE(nhk8815_nand_resources), }; /* These are the partitions for the OneNand device, different from above */ diff --git a/arch/arm/mach-nomadik/include/mach/fsmc.h b/arch/arm/mach-nomadik/include/mach/fsmc.h deleted file mode 100644 index 8c2c05183685..000000000000 --- a/arch/arm/mach-nomadik/include/mach/fsmc.h +++ /dev/null @@ -1,29 +0,0 @@ - -/* Definitions for the Nomadik FSMC "Flexible Static Memory controller" */ - -#ifndef __ASM_ARCH_FSMC_H -#define __ASM_ARCH_FSMC_H - -#include <mach/hardware.h> -/* - * Register list - */ - -/* bus control reg. and bus timing reg. for CS0..CS3 */ -#define FSMC_BCR(x) (NOMADIK_FSMC_VA + (x << 3)) -#define FSMC_BTR(x) (NOMADIK_FSMC_VA + (x << 3) + 0x04) - -/* PC-card and NAND: - * PCR = control register - * PMEM = memory timing - * PATT = attribute timing - * PIO = I/O timing - * PECCR = ECC result - */ -#define FSMC_PCR(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x00) -#define FSMC_PMEM(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x08) -#define FSMC_PATT(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x0c) -#define FSMC_PIO(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x10) -#define FSMC_PECCR(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x14) - -#endif /* __ASM_ARCH_FSMC_H */ diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c index 517a8ff7121e..6b4c70f7d23d 100644 --- a/drivers/clk/clk-nomadik.c +++ b/drivers/clk/clk-nomadik.c @@ -20,6 +20,7 @@ void __init nomadik_clk_init(void) clk_register_clkdev(clk, NULL, "gpio.2"); clk_register_clkdev(clk, NULL, "gpio.3"); clk_register_clkdev(clk, NULL, "rng"); + clk_register_clkdev(clk, NULL, "fsmc-nand"); /* * The 2.4 MHz TIMCLK reference clock is active at boot time, this is |
