ktest: Added config_bisect test type

Added the ability to do a config_bisect. It starts with a bad
config and does the following loop.

	Enable half the configs.
	if none of the configs to check are not enabled
	 (caused by missing dependencies) enable the other half.
	Run the test
	if the test passes, remove the configs from the check
	  but enabled them for further tests (to satisfy
	  dependencies).
	else
	  Remove any config that was not enabled, as we have found
	  a new config that can cause a failure.
	loop till we have only one config left.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

1 files changed, 388 insertions, 21 deletions

diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 7b6f8e1a82a4..0d1080548ea6 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -106,7 +106,6 @@ sub set_value {
     if (defined($opt{$lvalue})) {
 	die "Error: Option $lvalue defined more than once!\n";
     }
-    $opt{$lvalue} = $rvalue;
     if ($rvalue =~ /^\s*$/) {
 	delete $opt{$lvalue};
     } else {
@@ -945,20 +944,18 @@ sub run_git_bisect {
     return 1;
 }
 
-sub run_bisect {
-    my ($type) = @_;
+# returns 1 on success, 0 on failure
+sub run_bisect_test {
+    my ($type, $buildtype) = @_;
 
     my $failed = 0;
     my $result;
     my $output;
     my $ret;
 
-    if (defined($minconfig)) {
-	build "useconfig:$minconfig" or $failed = 1;
-    } else {
-	# ?? no config to use?
-	build "oldconfig" or $failed = 1;
-    }
+    $in_bisect = 1;
+
+    build $buildtype or $failed = 1;
 
     if ($type ne "build") {
 	dodie "Failed on build" if $failed;
@@ -980,7 +977,7 @@ sub run_bisect {
     }
 
     if ($failed) {
-	$result = "bad";
+	$result = 0;
 
 	# reboot the box to a good kernel
 	if ($type ne "build") {
@@ -991,19 +988,35 @@ sub run_bisect {
 	    end_monitor;
 	}
     } else {
-	$result = "good";
+	$result = 1;
+    }
+    $in_bisect = 0;
+
+    return $result;
+}
+
+sub run_bisect {
+    my ($type) = @_;
+    my $buildtype = "oldconfig";
+
+    # We should have a minconfig to use?
+    if (defined($minconfig)) {
+	$buildtype = "useconfig:$minconfig";
     }
 
+    my $ret = run_bisect_test $type, $buildtype;
+
+
     # Are we looking for where it worked, not failed?
     if ($reverse_bisect) {
-	if ($failed) {
-	    $result = "good";
-	} else {
-	    $result = "bad";
-	}
+	$ret = !$ret;
     }
 
-    return $result;
+    if ($ret) {
+	return "good";
+    } else {
+	return  "bad";
+    }
 }
 
 sub bisect {
@@ -1033,8 +1046,6 @@ sub bisect {
 	$reverse_bisect = 0;
     }
 
-    $in_bisect = 1;
-
     # Can't have a test without having a test to run
     if ($type eq "test" && !defined($run_test)) {
 	$type = "boot";
@@ -1108,7 +1119,359 @@ sub bisect {
 
     doprint "Bad commit was [$bisect_bad]\n";
 
-    $in_bisect = 0;
+    success $i;
+}
+
+my %config_ignore;
+my %config_set;
+
+my %config_list;
+my %null_config;
+
+my %dependency;
+
+sub process_config_ignore {
+    my ($config) = @_;
+
+    open (IN, $config)
+	or dodie "Failed to read $config";
+
+    while (<IN>) {
+	if (/^(.*?(CONFIG\S*)(=.*| is not set))/) {
+	    $config_ignore{$2} = $1;
+	}
+    }
+
+    close(IN);
+}
+
+sub read_current_config {
+    my ($config_ref) = @_;
+
+    %{$config_ref} = ();
+    undef %{$config_ref};
+
+    my @key = keys %{$config_ref};
+    if ($#key >= 0) {
+	print "did not delete!\n";
+	exit;
+    }
+    open (IN, "$output_config");
+
+    while (<IN>) {
+	if (/^(CONFIG\S+)=(.*)/) {
+	    ${$config_ref}{$1} = $2;
+	}
+    }
+    close(IN);
+}
+
+sub get_dependencies {
+    my ($config) = @_;
+
+    my $arr = $dependency{$config};
+    if (!defined($arr)) {
+	return ();
+    }
+
+    my @deps = @{$arr};
+
+    foreach my $dep (@{$arr}) {
+	print "ADD DEP $dep\n";
+	@deps = (@deps, get_dependencies $dep);
+    }
+
+    return @deps;
+}
+
+sub create_config {
+    my @configs = @_;
+
+    open(OUT, ">$output_config") or dodie "Can not write to $output_config";
+
+    foreach my $config (@configs) {
+	print OUT "$config_set{$config}\n";
+	my @deps = get_dependencies $config;
+	foreach my $dep (@deps) {
+	    print OUT "$config_set{$dep}\n";
+	}
+    }
+
+    foreach my $config (keys %config_ignore) {
+	print OUT "$config_ignore{$config}\n";
+    }
+    close(OUT);
+
+#    exit;
+    run_command "$make oldnoconfig" or
+	dodie "failed make config oldconfig";
+
+}
+
+sub compare_configs {
+    my (%a, %b) = @_;
+
+    foreach my $item (keys %a) {
+	if (!defined($b{$item})) {
+	    print "diff $item\n";
+	    return 1;
+	}
+	delete $b{$item};
+    }
+
+    my @keys = keys %b;
+    if ($#keys) {
+	print "diff2 $keys[0]\n";
+    }
+    return -1 if ($#keys >= 0);
+
+    return 0;
+}
+
+sub run_config_bisect_test {
+    my ($type) = @_;
+
+    return run_bisect_test $type, "oldconfig";
+}
+
+sub process_passed {
+    my (%configs) = @_;
+
+    doprint "These configs had no failure: (Enabling them for further compiles)\n";
+    # Passed! All these configs are part of a good compile.
+    # Add them to the min options.
+    foreach my $config (keys %configs) {
+	if (defined($config_list{$config})) {
+	    doprint " removing $config\n";
+	    $config_ignore{$config} = $config_list{$config};
+	    delete $config_list{$config};
+	}
+    }
+}
+
+sub process_failed {
+    my ($config) = @_;
+
+    doprint "\n\n***************************************\n";
+    doprint "Found bad config: $config\n";
+    doprint "***************************************\n\n";
+}
+
+sub run_config_bisect {
+
+    my @start_list = keys %config_list;
+
+    if ($#start_list < 0) {
+	doprint "No more configs to test!!!\n";
+	return -1;
+    }
+
+    doprint "***** RUN TEST ***\n";
+    my $type = $opt{"CONFIG_BISECT_TYPE[$iteration]"};
+    my $ret;
+    my %current_config;
+
+    my $count = $#start_list + 1;
+    doprint "  $count configs to test\n";
+
+    my $half = int($#start_list / 2);
+
+    do {
+	my @tophalf = @start_list[0 .. $half];
+
+	create_config @tophalf;
+	read_current_config \%current_config;
+
+	$count = $#tophalf + 1;
+	doprint "Testing $count configs\n";
+	my $found = 0;
+	# make sure we test something
+	foreach my $config (@tophalf) {
+	    if (defined($current_config{$config})) {
+		logit " $config\n";
+		$found = 1;
+	    }
+	}
+	if (!$found) {
+	    # try the other half
+	    doprint "Top half produced no set configs, trying bottom half\n";
+	    @tophalf = @start_list[$half .. $#start_list];
+	    create_config @tophalf;
+	    read_current_config \%current_config;
+	    foreach my $config (@tophalf) {
+		if (defined($current_config{$config})) {
+		    logit " $config\n";
+		    $found = 1;
+		}
+	    }
+	    if (!$found) {
+		doprint "Failed: Can't make new config with current configs\n";
+		foreach my $config (@start_list) {
+		    doprint "  CONFIG: $config\n";
+		}
+		return -1;
+	    }
+	    $count = $#tophalf + 1;
+	    doprint "Testing $count configs\n";
+	}
+
+	$ret = run_config_bisect_test $type;
+
+	if ($ret) {
+	    process_passed %current_config;
+	    return 0;
+	}
+
+	doprint "This config had a failure.\n";
+	doprint "Removing these configs that were not set in this config:\n";
+
+	# A config exists in this group that was bad.
+	foreach my $config (keys %config_list) {
+	    if (!defined($current_config{$config})) {
+		doprint " removing $config\n";
+		delete $config_list{$config};
+	    }
+	}
+
+	@start_list = @tophalf;
+
+	if ($#start_list == 0) {
+	    process_failed $start_list[0];
+	    return 1;
+	}
+
+	# remove half the configs we are looking at and see if
+	# they are good.
+	$half = int($#start_list / 2);
+    } while ($half > 0);
+
+    # we found a single config, try it again
+    my @tophalf = @start_list[0 .. 0];
+
+    $ret = run_config_bisect_test $type;
+    if ($ret) {
+	process_passed %current_config;
+	return 0;
+    }
+
+    process_failed $start_list[0];
+    return 1;
+}
+
+sub config_bisect {
+    my ($i) = @_;
+
+    my $start_config = $opt{"CONFIG_BISECT[$i]"};
+
+    my $tmpconfig = "$tmpdir/use_config";
+
+    # Make the file with the bad config and the min config
+    if (defined($minconfig)) {
+	# read the min config for things to ignore
+	run_command "cp $minconfig $tmpconfig" or
+	    dodie "failed to copy $minconfig to $tmpconfig";
+    } else {
+	unlink $tmpconfig;
+    }
+
+    # Add other configs
+    if (defined($addconfig)) {
+	run_command "cat $addconfig >> $tmpconfig" or
+	    dodie "failed to append $addconfig";
+    }
+
+    my $defconfig = "";
+    if (-f $tmpconfig) {
+	$defconfig = "KCONFIG_ALLCONFIG=$tmpconfig";
+	process_config_ignore $tmpconfig;
+    }
+
+    # now process the start config
+    run_command "cp $start_config $output_config" or
+	dodie "failed to copy $start_config to $output_config";
+
+    # read directly what we want to check
+    my %config_check;
+    open (IN, $output_config)
+	or dodie "faied to open $output_config";
+
+    while (<IN>) {
+	if (/^((CONFIG\S*)=.*)/) {
+	    $config_check{$2} = $1;
+	}
+    }
+    close(IN);
+
+    # Now run oldconfig with the minconfig (and addconfigs)
+    run_command "$defconfig $make oldnoconfig" or
+	dodie "failed make config oldconfig";
+
+    # check to see what we lost (or gained)
+    open (IN, $output_config)
+	or dodie "Failed to read $start_config";
+
+    my %removed_configs;
+    my %added_configs;
+
+    while (<IN>) {
+	if (/^((CONFIG\S*)=.*)/) {
+	    # save off all options
+	    $config_set{$2} = $1;
+	    if (defined($config_check{$2})) {
+		if (defined($config_ignore{$2})) {
+		    $removed_configs{$2} = $1;
+		} else {
+		    $config_list{$2} = $1;
+		}
+	    } elsif (!defined($config_ignore{$2})) {
+		$added_configs{$2} = $1;
+		$config_list{$2} = $1;
+	    }
+	}
+    }
+    close(IN);
+
+    my @confs = keys %removed_configs;
+    if ($#confs >= 0) {
+	doprint "Configs overridden by default configs and removed from check:\n";
+	foreach my $config (@confs) {
+	    doprint " $config\n";
+	}
+    }
+    @confs = keys %added_configs;
+    if ($#confs >= 0) {
+	doprint "Configs appearing in make oldconfig and added:\n";
+	foreach my $config (@confs) {
+	    doprint " $config\n";
+	}
+    }
+
+    my %config_test;
+    my $once = 0;
+
+    # Sometimes kconfig does weird things. We must make sure
+    # that the config we autocreate has everything we need
+    # to test, otherwise we may miss testing configs, or
+    # may not be able to create a new config.
+    # Here we create a config with everything set.
+    create_config (keys %config_list);
+    read_current_config \%config_test;
+    foreach my $config (keys %config_list) {
+	if (!defined($config_test{$config})) {
+	    if (!$once) {
+		$once = 1;
+		doprint "Configs not produced by kconfig (will not be checked):\n";
+	    }
+	    doprint "  $config\n";
+	    delete $config_list{$config};
+	}
+    }
+    my $ret;
+    do {
+	$ret = run_config_bisect;
+    } while (!$ret);
+
+    return $ret if ($ret < 0);
 
     success $i;
 }
@@ -1341,7 +1704,6 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
     $dmesg = "$tmpdir/dmesg-$machine";
     $make = "$makecmd O=$outputdir";
     $output_config = "$outputdir/.config";
-    $output_config = "$outputdir/.config";
 
     if ($reboot_type eq "grub") {
 	dodie "GRUB_MENU not defined" if (!defined($grub_menu));
@@ -1354,6 +1716,8 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
 	$run_type = $opt{"PATCHCHECK_TYPE[$i]"};
     } elsif ($test_type eq "bisect") {
 	$run_type = $opt{"BISECT_TYPE[$i]"};
+    } elsif ($test_type eq "config_bisect") {
+	$run_type = $opt{"CONFIG_BISECT_TYPE[$i]"};
     }
 
     # mistake in config file?
@@ -1385,6 +1749,9 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
     if ($test_type eq "bisect") {
 	bisect $i;
 	next;
+    } elsif ($test_type eq "config_bisect") {
+	config_bisect $i;
+	next;
     } elsif ($test_type eq "patchcheck") {
 	patchcheck $i;
 	next;