Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (250 commits)
  ALSA: hda: Storage class should be before const qualifier
  ASoC: tpa6130a2: Remove CPVSS and HPVdd supplies
  ASoC: tpa6130a2: Define output pins with SND_SOC_DAPM_OUTPUT
  ASoC: sdp4430 - add sdp4430 pcm ops to DAI.
  ASoC: TWL6040: Enable earphone path in codec
  ASoC: SDP4430: Add support for Earphone speaker
  ASoC: SDP4430: Add sdp4430 machine driver
  ASoC: tlv320dac33: Avoid powering off while in BIAS_OFF
  ASoC: tlv320dac33: Use dev_dbg in dac33_hard_power function
  ALSA: sound/pci/asihpi: Use kzalloc
  ALSA: hdmi - dont fail on extra nodes
  ALSA: intelhdmi - add id for the CougarPoint chipset
  ALSA: intelhdmi - user friendly codec name
  ALSA: intelhdmi - add dependency on SND_DYNAMIC_MINORS
  ALSA: asihpi: incorrect range check
  ALSA: asihpi: testing the wrong variable
  ALSA: es1688: add pedantic range checks
  ARM: McBSP: Add support for omap4 in McBSP driver
  ARM: McBSP: Fix request for irq in OMAP4
  OMAP: McBSP: Add 32-bit mode support
  ...

1 files changed, 1840 insertions, 0 deletions

diff --git a/sound/pci/asihpi/hpi6000.c b/sound/pci/asihpi/hpi6000.c
new file mode 100644
index 000000000000..839ecb2e4b64
--- /dev/null
+++ b/sound/pci/asihpi/hpi6000.c
@@ -0,0 +1,1840 @@
+/******************************************************************************
+
+    AudioScience HPI driver
+    Copyright (C) 1997-2010  AudioScience Inc. <support@audioscience.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of version 2 of the GNU General Public License as
+    published by the Free Software Foundation;
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+ Hardware Programming Interface (HPI) for AudioScience ASI6200 series adapters.
+ These PCI bus adapters are based on the TI C6711 DSP.
+
+ Exported functions:
+ void HPI_6000(struct hpi_message *phm, struct hpi_response *phr)
+
+ #defines
+ HIDE_PCI_ASSERTS to show the PCI asserts
+ PROFILE_DSP2 get profile data from DSP2 if present (instead of DSP 1)
+
+(C) Copyright AudioScience Inc. 1998-2003
+*******************************************************************************/
+#define SOURCEFILE_NAME "hpi6000.c"
+
+#include "hpi_internal.h"
+#include "hpimsginit.h"
+#include "hpidebug.h"
+#include "hpi6000.h"
+#include "hpidspcd.h"
+#include "hpicmn.h"
+
+#define HPI_HIF_BASE (0x00000200)	/* start of C67xx internal RAM */
+#define HPI_HIF_ADDR(member) \
+	(HPI_HIF_BASE + offsetof(struct hpi_hif_6000, member))
+#define HPI_HIF_ERROR_MASK      0x4000
+
+/* HPI6000 specific error codes */
+
+#define HPI6000_ERROR_BASE                              900
+#define HPI6000_ERROR_MSG_RESP_IDLE_TIMEOUT             901
+#define HPI6000_ERROR_MSG_RESP_SEND_MSG_ACK             902
+#define HPI6000_ERROR_MSG_RESP_GET_RESP_ACK             903
+#define HPI6000_ERROR_MSG_GET_ADR                       904
+#define HPI6000_ERROR_RESP_GET_ADR                      905
+#define HPI6000_ERROR_MSG_RESP_BLOCKWRITE32             906
+#define HPI6000_ERROR_MSG_RESP_BLOCKREAD32              907
+#define HPI6000_ERROR_MSG_INVALID_DSP_INDEX             908
+#define HPI6000_ERROR_CONTROL_CACHE_PARAMS              909
+
+#define HPI6000_ERROR_SEND_DATA_IDLE_TIMEOUT            911
+#define HPI6000_ERROR_SEND_DATA_ACK                     912
+#define HPI6000_ERROR_SEND_DATA_ADR                     913
+#define HPI6000_ERROR_SEND_DATA_TIMEOUT                 914
+#define HPI6000_ERROR_SEND_DATA_CMD                     915
+#define HPI6000_ERROR_SEND_DATA_WRITE                   916
+#define HPI6000_ERROR_SEND_DATA_IDLECMD                 917
+#define HPI6000_ERROR_SEND_DATA_VERIFY                  918
+
+#define HPI6000_ERROR_GET_DATA_IDLE_TIMEOUT             921
+#define HPI6000_ERROR_GET_DATA_ACK                      922
+#define HPI6000_ERROR_GET_DATA_CMD                      923
+#define HPI6000_ERROR_GET_DATA_READ                     924
+#define HPI6000_ERROR_GET_DATA_IDLECMD                  925
+
+#define HPI6000_ERROR_CONTROL_CACHE_ADDRLEN             951
+#define HPI6000_ERROR_CONTROL_CACHE_READ                952
+#define HPI6000_ERROR_CONTROL_CACHE_FLUSH               953
+
+#define HPI6000_ERROR_MSG_RESP_GETRESPCMD               961
+#define HPI6000_ERROR_MSG_RESP_IDLECMD                  962
+#define HPI6000_ERROR_MSG_RESP_BLOCKVERIFY32            963
+
+/* adapter init errors */
+#define HPI6000_ERROR_UNHANDLED_SUBSYS_ID               930
+
+/* can't access PCI2040 */
+#define HPI6000_ERROR_INIT_PCI2040                      931
+/* can't access DSP HPI i/f */
+#define HPI6000_ERROR_INIT_DSPHPI                       932
+/* can't access internal DSP memory */
+#define HPI6000_ERROR_INIT_DSPINTMEM                    933
+/* can't access SDRAM - test#1 */
+#define HPI6000_ERROR_INIT_SDRAM1                       934
+/* can't access SDRAM - test#2 */
+#define HPI6000_ERROR_INIT_SDRAM2                       935
+
+#define HPI6000_ERROR_INIT_VERIFY                       938
+
+#define HPI6000_ERROR_INIT_NOACK                        939
+
+#define HPI6000_ERROR_INIT_PLDTEST1                     941
+#define HPI6000_ERROR_INIT_PLDTEST2                     942
+
+/* local defines */
+
+#define HIDE_PCI_ASSERTS
+#define PROFILE_DSP2
+
+/* for PCI2040 i/f chip */
+/* HPI CSR registers */
+/* word offsets from CSR base */
+/* use when io addresses defined as u32 * */
+
+#define INTERRUPT_EVENT_SET     0
+#define INTERRUPT_EVENT_CLEAR   1
+#define INTERRUPT_MASK_SET      2
+#define INTERRUPT_MASK_CLEAR    3
+#define HPI_ERROR_REPORT        4
+#define HPI_RESET               5
+#define HPI_DATA_WIDTH          6
+
+#define MAX_DSPS 2
+/* HPI registers, spaced 8K bytes = 2K words apart */
+#define DSP_SPACING             0x800
+
+#define CONTROL                 0x0000
+#define ADDRESS                 0x0200
+#define DATA_AUTOINC            0x0400
+#define DATA                    0x0600
+
+#define TIMEOUT 500000
+
+struct dsp_obj {
+	__iomem u32 *prHPI_control;
+	__iomem u32 *prHPI_address;
+	__iomem u32 *prHPI_data;
+	__iomem u32 *prHPI_data_auto_inc;
+	char c_dsp_rev;		/*A, B */
+	u32 control_cache_address_on_dsp;
+	u32 control_cache_length_on_dsp;
+	struct hpi_adapter_obj *pa_parent_adapter;
+};
+
+struct hpi_hw_obj {
+	__iomem u32 *dw2040_HPICSR;
+	__iomem u32 *dw2040_HPIDSP;
+
+	u16 num_dsp;
+	struct dsp_obj ado[MAX_DSPS];
+
+	u32 message_buffer_address_on_dsp;
+	u32 response_buffer_address_on_dsp;
+	u32 pCI2040HPI_error_count;
+
+	struct hpi_control_cache_single control_cache[HPI_NMIXER_CONTROLS];
+	struct hpi_control_cache *p_cache;
+};
+
+static u16 hpi6000_dsp_block_write32(struct hpi_adapter_obj *pao,
+	u16 dsp_index, u32 hpi_address, u32 *source, u32 count);
+static u16 hpi6000_dsp_block_read32(struct hpi_adapter_obj *pao,
+	u16 dsp_index, u32 hpi_address, u32 *dest, u32 count);
+
+static short hpi6000_adapter_boot_load_dsp(struct hpi_adapter_obj *pao,
+	u32 *pos_error_code);
+static short hpi6000_check_PCI2040_error_flag(struct hpi_adapter_obj *pao,
+	u16 read_or_write);
+#define H6READ 1
+#define H6WRITE 0
+
+static short hpi6000_update_control_cache(struct hpi_adapter_obj *pao,
+	struct hpi_message *phm);
+static short hpi6000_message_response_sequence(struct hpi_adapter_obj *pao,
+	u16 dsp_index, struct hpi_message *phm, struct hpi_response *phr);
+
+static void hw_message(struct hpi_adapter_obj *pao, struct hpi_message *phm,
+	struct hpi_response *phr);
+
+static short hpi6000_wait_dsp_ack(struct hpi_adapter_obj *pao, u16 dsp_index,
+	u32 ack_value);
+
+static short hpi6000_send_host_command(struct hpi_adapter_obj *pao,
+	u16 dsp_index, u32 host_cmd);
+
+static void hpi6000_send_dsp_interrupt(struct dsp_obj *pdo);
+
+static short hpi6000_send_data(struct hpi_adapter_obj *pao, u16 dsp_index,
+	struct hpi_message *phm, struct hpi_response *phr);
+
+static short hpi6000_get_data(struct hpi_adapter_obj *pao, u16 dsp_index,
+	struct hpi_message *phm, struct hpi_response *phr);
+
+static void hpi_write_word(struct dsp_obj *pdo, u32 address, u32 data);
+
+static u32 hpi_read_word(struct dsp_obj *pdo, u32 address);
+
+static void hpi_write_block(struct dsp_obj *pdo, u32 address, u32 *pdata,
+	u32 length);
+
+static void hpi_read_block(struct dsp_obj *pdo, u32 address, u32 *pdata,
+	u32 length);
+
+static void subsys_create_adapter(struct hpi_message *phm,
+	struct hpi_response *phr);
+
+static void subsys_delete_adapter(struct hpi_message *phm,
+	struct hpi_response *phr);
+
+static void adapter_get_asserts(struct hpi_adapter_obj *pao,
+	struct hpi_message *phm, struct hpi_response *phr);
+
+static short create_adapter_obj(struct hpi_adapter_obj *pao,
+	u32 *pos_error_code);
+
+/* local globals */
+
+static u16 gw_pci_read_asserts;	/* used to count PCI2040 errors */
+static u16 gw_pci_write_asserts;	/* used to count PCI2040 errors */
+
+static void subsys_message(struct hpi_message *phm, struct hpi_response *phr)
+{
+
+	switch (phm->function) {
+	case HPI_SUBSYS_OPEN:
+	case HPI_SUBSYS_CLOSE:
+	case HPI_SUBSYS_GET_INFO:
+	case HPI_SUBSYS_DRIVER_UNLOAD:
+	case HPI_SUBSYS_DRIVER_LOAD:
+	case HPI_SUBSYS_FIND_ADAPTERS:
+		/* messages that should not get here */
+		phr->error = HPI_ERROR_UNIMPLEMENTED;
+		break;
+	case HPI_SUBSYS_CREATE_ADAPTER:
+		subsys_create_adapter(phm, phr);
+		break;
+	case HPI_SUBSYS_DELETE_ADAPTER:
+		subsys_delete_adapter(phm, phr);
+		break;
+	default:
+		phr->error = HPI_ERROR_INVALID_FUNC;
+		break;
+	}
+}
+
+static void control_message(struct hpi_adapter_obj *pao,
+	struct hpi_message *phm, struct hpi_response *phr)
+{
+
+	switch (phm->function) {
+	case HPI_CONTROL_GET_STATE:
+		if (pao->has_control_cache) {
+			u16 err;
+			err = hpi6000_update_control_cache(pao, phm);
+
+			if (err) {
+				phr->error = err;
+				break;
+			}
+
+			if (hpi_check_control_cache(((struct hpi_hw_obj *)
+						pao->priv)->p_cache, phm,
+					phr))
+				break;
+		}
+		hw_message(pao, phm, phr);
+		break;
+	case HPI_CONTROL_GET_INFO:
+		hw_message(pao, phm, phr);
+		break;
+	case HPI_CONTROL_SET_STATE:
+		hw_message(pao, phm, phr);
+		hpi_sync_control_cache(((struct hpi_hw_obj *)pao->priv)->
+			p_cache, phm, phr);
+		break;
+	default:
+		phr->error = HPI_ERROR_INVALID_FUNC;
+		break;
+	}
+}
+
+static void adapter_message(struct hpi_adapter_obj *pao,
+	struct hpi_message *phm, struct hpi_response *phr)
+{
+	switch (phm->function) {
+	case HPI_ADAPTER_GET_INFO:
+		hw_message(pao, phm, phr);
+		break;
+	case HPI_ADAPTER_GET_ASSERT:
+		adapter_get_asserts(pao, phm, phr);
+		break;
+	case HPI_ADAPTER_OPEN:
+	case HPI_ADAPTER_CLOSE:
+	case HPI_ADAPTER_TEST_ASSERT:
+	case HPI_ADAPTER_SELFTEST:
+	case HPI_ADAPTER_GET_MODE:
+	case HPI_ADAPTER_SET_MODE:
+	case HPI_ADAPTER_FIND_OBJECT:
+	case HPI_ADAPTER_GET_PROPERTY:
+	case HPI_ADAPTER_SET_PROPERTY:
+	case HPI_ADAPTER_ENUM_PROPERTY:
+		hw_message(pao, phm, phr);
+		break;
+	default:
+		phr->error = HPI_ERROR_INVALID_FUNC;
+		break;
+	}
+}
+
+static void outstream_message(struct hpi_adapter_obj *pao,
+	struct hpi_message *phm, struct hpi_response *phr)
+{
+	switch (phm->function) {
+	case HPI_OSTREAM_HOSTBUFFER_ALLOC:
+	case HPI_OSTREAM_HOSTBUFFER_FREE:
+		/* Don't let these messages go to the HW function because
+		 * they're called without allocating the spinlock.
+		 * For the HPI6000 adapters the HW would return
+		 * HPI_ERROR_INVALID_FUNC anyway.
+		 */
+		phr->error = HPI_ERROR_INVALID_FUNC;
+		break;
+	default:
+		hw_message(pao, phm, phr);
+		return;
+	}
+}
+
+static void instream_message(struct hpi_adapter_obj *pao,
+	struct hpi_message *phm, struct hpi_response *phr)
+{
+
+	switch (phm->function) {
+	case HPI_ISTREAM_HOSTBUFFER_ALLOC:
+	case HPI_ISTREAM_HOSTBUFFER_FREE:
+		/* Don't let these messages go to the HW function because
+		 * they're called without allocating the spinlock.
+		 * For the HPI6000 adapters the HW would return
+		 * HPI_ERROR_INVALID_FUNC anyway.
+		 */
+		phr->error = HPI_ERROR_INVALID_FUNC;
+		break;
+	default:
+		hw_message(pao, phm, phr);
+		return;
+	}
+}
+
+/************************************************************************/
+/** HPI_6000()
+ * Entry point from HPIMAN
+ * All calls to the HPI start here
+ */
+void HPI_6000(struct hpi_message *phm, struct hpi_response *phr)
+{
+	struct hpi_adapter_obj *pao = NULL;
+
+	/* subsytem messages get executed by every HPI. */
+	/* All other messages are ignored unless the adapter index matches */
+	/* an adapter in the HPI */
+	HPI_DEBUG_LOG(DEBUG, "O %d,F %x\n", phm->object, phm->function);
+
+	/* if Dsp has crashed then do not communicate with it any more */
+	if (phm->object != HPI_OBJ_SUBSYSTEM) {
+		pao = hpi_find_adapter(phm->adapter_index);
+		if (!pao) {
+			HPI_DEBUG_LOG(DEBUG,
+				" %d,%d refused, for another HPI?\n",
+				phm->object, phm->function);
+			return;
+		}
+
+		if (pao->dsp_crashed >= 10) {
+			hpi_init_response(phr, phm->object, phm->function,
+				HPI_ERROR_DSP_HARDWARE);
+			HPI_DEBUG_LOG(DEBUG, " %d,%d dsp crashed.\n",
+				phm->object, phm->function);
+			return;
+		}
+	}
+	/* Init default response including the size field */
+	if (phm->function != HPI_SUBSYS_CREATE_ADAPTER)
+		hpi_init_response(phr, phm->object, phm->function,
+			HPI_ERROR_PROCESSING_MESSAGE);
+
+	switch (phm->type) {
+	case HPI_TYPE_MESSAGE:
+		switch (phm->object) {
+		case HPI_OBJ_SUBSYSTEM:
+			subsys_message(phm, phr);
+			break;
+
+		case HPI_OBJ_ADAPTER:
+			phr->size =
+				sizeof(struct hpi_response_header) +
+				sizeof(struct hpi_adapter_res);
+			adapter_message(pao, phm, phr);
+			break;
+
+		case HPI_OBJ_CONTROL:
+			control_message(pao, phm, phr);
+			break;
+
+		case HPI_OBJ_OSTREAM:
+			outstream_message(pao, phm, phr);
+			break;
+
+		case HPI_OBJ_ISTREAM:
+			instream_message(pao, phm, phr);
+			break;
+
+		default:
+			hw_message(pao, phm, phr);
+			break;
+		}
+		break;
+
+	default:
+		phr->error = HPI_ERROR_INVALID_TYPE;
+		break;
+	}
+}
+
+/************************************************************************/
+/* SUBSYSTEM */
+
+/* create an adapter object and initialise it based on resource information
+ * passed in in the message
+ * NOTE - you cannot use this function AND the FindAdapters function at the
+ * same time, the application must use only one of them to get the adapters
+ */
+static void subsys_create_adapter(struct hpi_message *phm,
+	struct hpi_response *phr)
+{
+	/* create temp adapter obj, because we don't know what index yet */
+	struct hpi_adapter_obj ao;
+	struct hpi_adapter_obj *pao;
+	u32 os_error_code;
+	short error = 0;
+	u32 dsp_index = 0;
+
+	HPI_DEBUG_LOG(VERBOSE, "subsys_create_adapter\n");
+
+	memset(&ao, 0, sizeof(ao));
+
+	/* this HPI only creates adapters for TI/PCI2040 based devices */
+	if (phm->u.s.resource.bus_type != HPI_BUS_PCI)
+		return;
+	if (phm->u.s.resource.r.pci->vendor_id != HPI_PCI_VENDOR_ID_TI)
+		return;
+	if (phm->u.s.resource.r.pci->device_id != HPI_PCI_DEV_ID_PCI2040)
+		return;
+
+	ao.priv = kzalloc(sizeof(struct hpi_hw_obj), GFP_KERNEL);
+	if (!ao.priv) {
+		HPI_DEBUG_LOG(ERROR, "cant get mem for adapter object\n");
+		phr->error = HPI_ERROR_MEMORY_ALLOC;
+		return;
+	}
+
+	/* create the adapter object based on the resource information */
+	/*? memcpy(&ao.Pci,&phm->u.s.Resource.r.Pci,sizeof(ao.Pci)); */
+	ao.pci = *phm->u.s.resource.r.pci;
+
+	error = create_adapter_obj(&ao, &os_error_code);
+	if (!error)
+		error = hpi_add_adapter(&ao);
+	if (error) {
+		phr->u.s.data = os_error_code;
+		kfree(ao.priv);
+		phr->error = error;
+		return;
+	}
+	/* need to update paParentAdapter */
+	pao = hpi_find_adapter(ao.index);
+	if (!pao) {
+		/* We just added this adapter, why can't we find it!? */
+		HPI_DEBUG_LOG(ERROR, "lost adapter after boot\n");
+		phr->error = 950;
+		return;
+	}
+
+	for (dsp_index = 0; dsp_index < MAX_DSPS; dsp_index++) {
+		struct hpi_hw_obj *phw = (struct hpi_hw_obj *)pao->priv;
+		phw->ado[dsp_index].pa_parent_adapter = pao;
+	}
+
+	phr->u.s.aw_adapter_list[ao.index] = ao.adapter_type;
+	phr->u.s.adapter_index = ao.index;
+	phr->u.s.num_adapters++;
+	phr->error = 0;
+}
+
+static void subsys_delete_adapter(struct hpi_message *phm,
+	struct hpi_response *phr)
+{
+	struct hpi_adapter_obj *pao = NULL;
+	struct hpi_hw_obj *phw;
+
+	pao = hpi_find_adapter(phm->adapter_index);
+	if (!pao)
+		return;
+
+	phw = (struct hpi_hw_obj *)pao->priv;
+
+	if (pao->has_control_cache)
+		hpi_free_control_cache(phw->p_cache);
+
+	hpi_delete_adapter(pao);
+	kfree(phw);
+
+	phr->error = 0;
+}
+
+/* this routine is called from SubSysFindAdapter and SubSysCreateAdapter */
+static short create_adapter_obj(struct hpi_adapter_obj *pao,
+	u32 *pos_error_code)
+{
+	short boot_error = 0;
+	u32 dsp_index = 0;
+	u32 control_cache_size = 0;
+	u32 control_cache_count = 0;
+	struct hpi_hw_obj *phw = (struct hpi_hw_obj *)pao->priv;
+
+	/* init error reporting */
+	pao->dsp_crashed = 0;
+
+	/* The PCI2040 has the following address map */
+	/* BAR0 - 4K = HPI control and status registers on PCI2040 (HPI CSR) */
+	/* BAR1 - 32K = HPI registers on DSP */
+	phw->dw2040_HPICSR = pao->pci.ap_mem_base[0];
+	phw->dw2040_HPIDSP = pao->pci.ap_mem_base[1];
+	HPI_DEBUG_LOG(VERBOSE, "csr %p, dsp %p\n", phw->dw2040_HPICSR,
+		phw->dw2040_HPIDSP);
+
+	/* set addresses for the possible DSP HPI interfaces */
+	for (dsp_index = 0; dsp_index < MAX_DSPS; dsp_index++) {
+		phw->ado[dsp_index].prHPI_control =
+			phw->dw2040_HPIDSP + (CONTROL +
+			DSP_SPACING * dsp_index);
+
+		phw->ado[dsp_index].prHPI_address =
+			phw->dw2040_HPIDSP + (ADDRESS +
+			DSP_SPACING * dsp_index);
+		phw->ado[dsp_index].prHPI_data =
+			phw->dw2040_HPIDSP + (DATA + DSP_SPACING * dsp_index);
+
+		phw->ado[dsp_index].prHPI_data_auto_inc =
+			phw->dw2040_HPIDSP + (DATA_AUTOINC +
+			DSP_SPACING * dsp_index);
+
+		HPI_DEBUG_LOG(VERBOSE, "ctl %p, adr %p, dat %p, dat++ %p\n",
+			phw->ado[dsp_index].prHPI_control,
+			phw->ado[dsp_index].prHPI_address,
+			phw->ado[dsp_index].prHPI_data,
+			phw->ado[dsp_index].prHPI_data_auto_inc);
+
+		phw->ado[dsp_index].pa_parent_adapter = pao;
+	}
+
+	phw->pCI2040HPI_error_count = 0;
+	pao->has_control_cache = 0;
+
+	/* Set the default number of DSPs on this card */
+	/* This is (conditionally) adjusted after bootloading */
+	/* of the first DSP in the bootload section. */
+	phw->num_dsp = 1;
+
+	boot_error = hpi6000_adapter_boot_load_dsp(pao, pos_error_code);
+	if (boot_error)
+		return boot_error;
+
+	HPI_DEBUG_LOG(INFO, "bootload DSP OK\n");
+
+	phw->message_buffer_address_on_dsp = 0L;
+	phw->response_buffer_address_on_dsp = 0L;
+
+	/* get info about the adapter by asking the adapter */
+	/* send a HPI_ADAPTER_GET_INFO message */
+	{
+		struct hpi_message hM;
+		struct hpi_response hR0;	/* response from DSP 0 */
+		struct hpi_response hR1;	/* response from DSP 1 */
+		u16 error = 0;
+
+		HPI_DEBUG_LOG(VERBOSE, "send ADAPTER_GET_INFO\n");
+		memset(&hM, 0, sizeof(hM));
+		hM.type = HPI_TYPE_MESSAGE;
+		hM.size = sizeof(struct hpi_message);
+		hM.object = HPI_OBJ_ADAPTER;
+		hM.function = HPI_ADAPTER_GET_INFO;
+		hM.adapter_index = 0;
+		memset(&hR0, 0, sizeof(hR0));
+		memset(&hR1, 0, sizeof(hR1));
+		hR0.size = sizeof(hR0);
+		hR1.size = sizeof(hR1);
+
+		error = hpi6000_message_response_sequence(pao, 0, &hM, &hR0);
+		if (hR0.error) {
+			HPI_DEBUG_LOG(DEBUG, "message error %d\n", hR0.error);
+			return hR0.error;
+		}
+		if (phw->num_dsp == 2) {
+			error = hpi6000_message_response_sequence(pao, 1, &hM,
+				&hR1);
+			if (error)
+				return error;
+		}
+		pao->adapter_type = hR0.u.a.adapter_type;
+		pao->index = hR0.u.a.adapter_index;
+	}
+
+	memset(&phw->control_cache[0], 0,
+		sizeof(struct hpi_control_cache_single) *
+		HPI_NMIXER_CONTROLS);
+	/* Read the control cache length to figure out if it is turned on */
+	control_cache_size =
+		hpi_read_word(&phw->ado[0],
+		HPI_HIF_ADDR(control_cache_size_in_bytes));
+	if (control_cache_size) {
+		control_cache_count =
+			hpi_read_word(&phw->ado[0],
+			HPI_HIF_ADDR(control_cache_count));
+		pao->has_control_cache = 1;
+
+		phw->p_cache =
+			hpi_alloc_control_cache(control_cache_count,
+			control_cache_size, (struct hpi_control_cache_info *)
+			&phw->control_cache[0]
+			);
+	} else
+		pao->has_control_cache = 0;
+
+	HPI_DEBUG_LOG(DEBUG, "get adapter info ASI%04X index %d\n",
+		pao->adapter_type, pao->index);
+	pao->open = 0;	/* upon creation the adapter is closed */
+	return 0;
+}
+
+/************************************************************************/
+/* ADAPTER */
+
+static void adapter_get_asserts(struct hpi_adapter_obj *pao,
+	struct hpi_message *phm, struct hpi_response *phr)
+{
+#ifndef HIDE_PCI_ASSERTS
+	/* if we have PCI2040 asserts then collect them */
+	if ((gw_pci_read_asserts > 0) || (gw_pci_write_asserts > 0)) {
+		phr->u.a.serial_number =
+			gw_pci_read_asserts * 100 + gw_pci_write_asserts;
+		phr->u.a.adapter_index = 1;	/* assert count */
+		phr->u.a.adapter_type = -1;	/* "dsp index" */
+		strcpy(phr->u.a.sz_adapter_assert, "PCI2040 error");
+		gw_pci_read_asserts = 0;
+		gw_pci_write_asserts = 0;
+		phr->error = 0;
+	} else
+#endif
+		hw_message(pao, phm, phr);	/*get DSP asserts */
+
+	return;
+}
+
+/************************************************************************/
+/* LOW-LEVEL */
+
+static short hpi6000_adapter_boot_load_dsp(struct hpi_adapter_obj *pao,
+	u32 *pos_error_code)
+{
+	struct hpi_hw_obj *phw = (struct hpi_hw_obj *)pao->priv;
+	short error;
+	u32 timeout;
+	u32 read = 0;
+	u32 i = 0;
+	u32 data = 0;
+	u32 j = 0;
+	u32 test_addr = 0x80000000;
+	u32 test_data = 0x00000001;
+	u32 dw2040_reset = 0;
+	u32 dsp_index = 0;
+	u32 endian = 0;
+	u32 adapter_info = 0;
+	u32 delay = 0;
+
+	struct dsp_code dsp_code;
+	u16 boot_load_family = 0;
+
+	/* NOTE don't use wAdapterType in this routine. It is not setup yet */
+
+	switch (pao->pci.subsys_device_id) {
+	case 0x5100:
+	case 0x5110:	/* ASI5100 revB or higher with C6711D */
+	case 0x6100:
+	case 0x6200:
+		boot_load_family = HPI_ADAPTER_FAMILY_ASI(0x6200);
+		break;
+	case 0x8800:
+		boot_load_family = HPI_ADAPTER_FAMILY_ASI(0x8800);
+		break;
+	default:
+		return HPI6000_ERROR_UNHANDLED_SUBSYS_ID;
+	}
+
+	/* reset all DSPs, indicate two DSPs are present
+	 * set RST3-=1 to disconnect HAD8 to set DSP in little endian mode
+	 */
+	endian = 0;
+	dw2040_reset = 0x0003000F;
+	iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET);
+
+	/* read back register to make sure PCI2040 chip is functioning
+	 * note that bits 4..15 are read-only and so should always return zero,
+	 * even though we wrote 1 to them
+	 */
+	for (i = 0; i < 1000; i++)
+		delay = ioread32(phw->dw2040_HPICSR + HPI_RESET);
+	if (delay != dw2040_reset) {
+		HPI_DEBUG_LOG(ERROR, "INIT_PCI2040 %x %x\n", dw2040_reset,
+			delay);
+		return HPI6000_ERROR_INIT_PCI2040;
+	}
+
+	/* Indicate that DSP#0,1 is a C6X */
+	iowrite32(0x00000003, phw->dw2040_HPICSR + HPI_DATA_WIDTH);
+	/* set Bit30 and 29 - which will prevent Target aborts from being
+	 * issued upon HPI or GP error
+	 */
+	iowrite32(0x60000000, phw->dw2040_HPICSR + INTERRUPT_MASK_SET);
+
+	/* isolate DSP HAD8 line from PCI2040 so that
+	 * Little endian can be set by pullup
+	 */
+	dw2040_reset = dw2040_reset & (~(endian << 3));
+	iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET);
+
+	phw->ado[0].c_dsp_rev = 'B';	/* revB */
+	phw->ado[1].c_dsp_rev = 'B';	/* revB */
+
+	/*Take both DSPs out of reset, setting HAD8 to the correct Endian */
+	dw2040_reset = dw2040_reset & (~0x00000001);	/* start DSP 0 */
+	iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET);
+	dw2040_reset = dw2040_reset & (~0x00000002);	/* start DSP 1 */
+	iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET);
+
+	/* set HAD8 back to PCI2040, now that DSP set to little endian mode */
+	dw2040_reset = dw2040_reset & (~0x00000008);
+	iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET);
+	/*delay to allow DSP to get going */
+	for (i = 0; i < 100; i++)
+		delay = ioread32(phw->dw2040_HPICSR + HPI_RESET);
+
+	/* loop through all DSPs, downloading DSP code */
+	for (dsp_index = 0; dsp_index < phw->num_dsp; dsp_index++) {
+		struct dsp_obj *pdo = &phw->ado[dsp_index];
+
+		/* configure DSP so that we download code into the SRAM */
+		/* set control reg for little endian, HWOB=1 */
+		iowrite32(0x00010001, pdo->prHPI_control);
+
+		/* test access to the HPI address register (HPIA) */
+		test_data = 0x00000001;
+		for (j = 0; j < 32; j++) {
+			iowrite32(test_data, pdo->prHPI_address);
+			data = ioread32(pdo->prHPI_address);
+			if (data != test_data) {
+				HPI_DEBUG_LOG(ERROR, "INIT_DSPHPI %x %x %x\n",
+					test_data, data, dsp_index);
+				return HPI6000_ERROR_INIT_DSPHPI;
+			}
+			test_data = test_data << 1;
+		}
+
+/* if C6713 the setup PLL to generate 225MHz from 25MHz.
+* Since the PLLDIV1 read is sometimes wrong, even on a C6713,
+* we're going to do this unconditionally
+*/
+/* PLLDIV1 should have a value of 8000 after reset */
+/*
+	if (HpiReadWord(pdo,0x01B7C118) == 0x8000)
+*/
+		{
+			/* C6713 datasheet says we cannot program PLL from HPI,
+			 * and indeed if we try to set the PLL multiply from the
+			 * HPI, the PLL does not seem to lock,
+			 * so we enable the PLL and use the default of x 7
+			 */
+			/* bypass PLL */
+			hpi_write_word(pdo, 0x01B7C100, 0x0000);
+			for (i = 0; i < 100; i++)
+				delay = ioread32(phw->dw2040_HPICSR +
+					HPI_RESET);
+
+			/*  ** use default of PLL  x7 ** */
+			/* EMIF = 225/3=75MHz */
+			hpi_write_word(pdo, 0x01B7C120, 0x8002);
+			/* peri = 225/2 */
+			hpi_write_word(pdo, 0x01B7C11C, 0x8001);
+			/* cpu  = 225/1 */
+			hpi_write_word(pdo, 0x01B7C118, 0x8000);
+			/* ~200us delay */
+			for (i = 0; i < 2000; i++)
+				delay = ioread32(phw->dw2040_HPICSR +
+					HPI_RESET);
+			/* PLL not bypassed */
+			hpi_write_word(pdo, 0x01B7C100, 0x0001);
+			/* ~200us delay */
+			for (i = 0; i < 2000; i++)
+				delay = ioread32(phw->dw2040_HPICSR +
+					HPI_RESET);
+		}
+
+		/* test r/w to internal DSP memory
+		 * C6711 has L2 cache mapped to 0x0 when reset
+		 *
+		 *  revB - because of bug 3.0.1 last HPI read
+		 * (before HPI address issued) must be non-autoinc
+		 */
+		/* test each bit in the 32bit word */
+		for (i = 0; i < 100; i++) {
+			test_addr = 0x00000000;
+			test_data = 0x00000001;
+			for (j = 0; j < 32; j++) {
+				hpi_write_word(pdo, test_addr + i, test_data);
+				data = hpi_read_word(pdo, test_addr + i);
+				if (data != test_data) {
+					HPI_DEBUG_LOG(ERROR,
+						"DSP mem %x %x %x %x\n",
+						test_addr + i, test_data,
+						data, dsp_index);
+
+					return HPI6000_ERROR_INIT_DSPINTMEM;
+				}
+				test_data = test_data << 1;
+			}
+		}
+
+		/* memory map of ASI6200
+		   00000000-0000FFFF    16Kx32 internal program
+		   01800000-019FFFFF    Internal peripheral
+		   80000000-807FFFFF    CE0 2Mx32 SDRAM running @ 100MHz
+		   90000000-9000FFFF    CE1 Async peripherals:
+
+		   EMIF config
+		   ------------
+		   Global EMIF control
+		   0 -
+		   1 -
+		   2 -
+		   3 CLK2EN = 1   CLKOUT2 enabled
+		   4 CLK1EN = 0   CLKOUT1 disabled
+		   5 EKEN = 1 <--!! C6713 specific, enables ECLKOUT
+		   6 -
+		   7 NOHOLD = 1   external HOLD disabled
+		   8 HOLDA = 0    HOLDA output is low
+		   9 HOLD = 0             HOLD input is low
+		   10 ARDY = 1    ARDY input is high
+		   11 BUSREQ = 0   BUSREQ output is low
+		   12,13 Reserved = 1
+		 */
+		hpi_write_word(pdo, 0x01800000, 0x34A8);
+
+		/* EMIF CE0 setup - 2Mx32 Sync DRAM
+		   31..28       Wr setup
+		   27..22       Wr strobe
+		   21..20       Wr hold
+		   19..16       Rd setup
+		   15..14       -
+		   13..8        Rd strobe
+		   7..4         MTYPE   0011            Sync DRAM 32bits
+		   3            Wr hold MSB
+		   2..0         Rd hold
+		 */
+		hpi_write_word(pdo, 0x01800008, 0x00000030);
+
+		/* EMIF SDRAM Extension
+		   31-21        0
+		   20           WR2RD = 0
+		   19-18        WR2DEAC = 1
+		   17           WR2WR = 0
+		   16-15        R2WDQM = 2
+		   14-12        RD2WR = 4
+		   11-10        RD2DEAC = 1
+		   9            RD2RD = 1
+		   8-7          THZP = 10b
+		   6-5          TWR  = 2-1 = 01b (tWR = 10ns)
+		   4            TRRD = 0b = 2 ECLK (tRRD = 14ns)
+		   3-1          TRAS = 5-1 = 100b (Tras=42ns = 5 ECLK)
+		   1            CAS latency = 3 ECLK
+		   (for Micron 2M32-7 operating at 100Mhz)
+		 */
+
+		/* need to use this else DSP code crashes */
+		hpi_write_word(pdo, 0x01800020, 0x001BDF29);
+
+		/* EMIF SDRAM control - set up for a 2Mx32 SDRAM (512x32x4 bank)
+		   31           -               -
+		   30           SDBSZ   1               4 bank
+		   29..28       SDRSZ   00              11 row address pins
+		   27..26       SDCSZ   01              8 column address pins
+		   25           RFEN    1               refersh enabled
+		   24           INIT    1               init SDRAM
+		   23..20       TRCD    0001
+		   19..16       TRP             0001
+		   15..12       TRC             0110
+		   11..0        -               -
+		 */
+		/*      need to use this else DSP code crashes */
+		hpi_write_word(pdo, 0x01800018, 0x47117000);
+
+		/* EMIF SDRAM Refresh Timing */
+		hpi_write_word(pdo, 0x0180001C, 0x00000410);
+
+		/*MIF CE1 setup - Async peripherals
+		   @100MHz bus speed, each cycle is 10ns,
+		   31..28       Wr setup  = 1
+		   27..22       Wr strobe = 3                   30ns
+		   21..20       Wr hold = 1
+		   19..16       Rd setup =1
+		   15..14       Ta = 2
+		   13..8        Rd strobe = 3                   30ns
+		   7..4         MTYPE   0010            Async 32bits
+		   3            Wr hold MSB =0
+		   2..0         Rd hold = 1
+		 */
+		{
+			u32 cE1 =
+				(1L << 28) | (3L << 22) | (1L << 20) | (1L <<
+				16) | (2L << 14) | (3L << 8) | (2L << 4) | 1L;
+			hpi_write_word(pdo, 0x01800004, cE1);
+		}
+
+		/* delay a little to allow SDRAM and DSP to "get going" */
+
+		for (i = 0; i < 1000; i++)
+			delay = ioread32(phw->dw2040_HPICSR + HPI_RESET);
+
+		/* test access to SDRAM */
+		{
+			test_addr = 0x80000000;
+			test_data = 0x00000001;
+			/* test each bit in the 32bit word */
+			for (j = 0; j < 32; j++) {
+				hpi_write_word(pdo, test_addr, test_data);
+				data = hpi_read_word(pdo, test_addr);
+				if (data != test_data) {
+					HPI_DEBUG_LOG(ERROR,
+						"DSP dram %x %x %x %x\n",
+						test_addr, test_data, data,
+						dsp_index);
+
+					return HPI6000_ERROR_INIT_SDRAM1;
+				}
+				test_data = test_data << 1;
+			}
+			/* test every Nth address in the DRAM */
+#define DRAM_SIZE_WORDS 0x200000	/*2_mx32 */
+#define DRAM_INC 1024
+			test_addr = 0x80000000;
+			test_data = 0x0;
+			for (i = 0; i < DRAM_SIZE_WORDS; i = i + DRAM_INC) {
+				hpi_write_word(pdo, test_addr + i, test_data);
+				test_data++;
+			}
+			test_addr = 0x80000000;
+			test_data = 0x0;
+			for (i = 0; i < DRAM_SIZE_WORDS; i = i + DRAM_INC) {
+				data = hpi_read_word(pdo, test_addr + i);
+				if (data != test_data) {
+					HPI_DEBUG_LOG(ERROR,
+						"DSP dram %x %x %x %x\n",
+						test_addr + i, test_data,
+						data, dsp_index);
+					return HPI6000_ERROR_INIT_SDRAM2;
+				}
+				test_data++;
+			}
+
+		}
+
+		/* write the DSP code down into the DSPs memory */
+		/*HpiDspCode_Open(nBootLoadFamily,&DspCode,pdwOsErrorCode); */
+		dsp_code.ps_dev = pao->pci.p_os_data;
+
+		error = hpi_dsp_code_open(boot_load_family, &dsp_code,
+			pos_error_code);
+
+		if (error)
+			return error;
+
+		while (1) {
+			u32 length;
+			u32 address;
+			u32 type;
+			u32 *pcode;
+
+			error = hpi_dsp_code_read_word(&dsp_code, &length);
+			if (error)
+				break;
+			if (length == 0xFFFFFFFF)
+				break;	/* end of code */
+
+			error = hpi_dsp_code_read_word(&dsp_code, &address);
+			if (error)
+				break;
+			error = hpi_dsp_code_read_word(&dsp_code, &type);
+			if (error)
+				break;
+			error = hpi_dsp_code_read_block(length, &dsp_code,
+				&pcode);
+			if (error)
+				break;
+			error = hpi6000_dsp_block_write32(pao, (u16)dsp_index,
+				address, pcode, length);
+			if (error)
+				break;
+		}
+
+		if (error) {
+			hpi_dsp_code_close(&dsp_code);
+			return error;
+		}
+		/* verify that code was written correctly */
+		/* this time through, assume no errors in DSP code file/array */
+		hpi_dsp_code_rewind(&dsp_code);
+		while (1) {
+			u32 length;
+			u32 address;
+			u32 type;
+			u32 *pcode;
+
+			hpi_dsp_code_read_word(&dsp_code, &length);
+			if (length == 0xFFFFFFFF)
+				break;	/* end of code */
+
+			hpi_dsp_code_read_word(&dsp_code, &address);
+			hpi_dsp_code_read_word(&dsp_code, &type);
+			hpi_dsp_code_read_block(length, &dsp_code, &pcode);
+
+			for (i = 0; i < length; i++) {
+				data = hpi_read_word(pdo, address);
+				if (data != *pcode) {
+					error = HPI6000_ERROR_INIT_VERIFY;
+					HPI_DEBUG_LOG(ERROR,
+						"DSP verify %x %x %x %x\n",
+						address, *pcode, data,
+						dsp_index);
+					break;
+				}
+				pcode++;
+				address += 4;
+			}
+			if (error)
+				break;
+		}
+		hpi_dsp_code_close(&dsp_code);
+		if (error)
+			return error;
+
+		/* zero out the hostmailbox */
+		{
+			u32 address = HPI_HIF_ADDR(host_cmd);
+			for (i = 0; i < 4; i++) {
+				hpi_write_word(pdo, address, 0);
+				address += 4;
+			}
+		}
+		/* write the DSP number into the hostmailbox */
+		/* structure before starting the DSP */
+		hpi_write_word(pdo, HPI_HIF_ADDR(dsp_number), dsp_index);
+
+		/* write the DSP adapter Info into the */
+		/* hostmailbox before starting the DSP */
+		if (dsp_index > 0)
+			hpi_write_word(pdo, HPI_HIF_ADDR(adapter_info),
+				adapter_info);
+
+		/* step 3. Start code by sending interrupt */
+		iowrite32(0x00030003, pdo->prHPI_control);
+		for (i = 0; i < 10000; i++)
+			delay = ioread32(phw->dw2040_HPICSR + HPI_RESET);
+
+		/* wait for a non-zero value in hostcmd -
+		 * indicating initialization is complete
+		 *
+		 * Init could take a while if DSP checks SDRAM memory
+		 * Was 200000. Increased to 2000000 for ASI8801 so we
+		 * don't get 938 errors.
+		 */
+		timeout = 2000000;
+		while (timeout) {
+			do {
+				read = hpi_read_word(pdo,
+					HPI_HIF_ADDR(host_cmd));
+			} while (--timeout
+				&& hpi6000_check_PCI2040_error_flag(pao,
+					H6READ));
+
+			if (read)
+				break;
+			/* The following is a workaround for bug #94:
+			 * Bluescreen on install and subsequent boots on a
+			 * DELL PowerEdge 600SC PC with 1.8GHz P4 and
+			 * ServerWorks chipset. Without this delay the system
+			 * locks up with a bluescreen (NOT GPF or pagefault).
+			 */
+			else
+				hpios_delay_micro_seconds(1000);
+		}
+		if (timeout == 0)
+			return HPI6000_ERROR_INIT_NOACK;
+
+		/* read the DSP adapter Info from the */
+		/* hostmailbox structure after starting the DSP */
+		if (dsp_index == 0) {
+			/*u32 dwTestData=0; */
+			u32 mask = 0;
+
+			adapter_info =
+				hpi_read_word(pdo,
+				HPI_HIF_ADDR(adapter_info));
+			if (HPI_ADAPTER_FAMILY_ASI
+				(HPI_HIF_ADAPTER_INFO_EXTRACT_ADAPTER
+					(adapter_info)) ==
+				HPI_ADAPTER_FAMILY_ASI(0x6200))
+				/* all 6200 cards have this many DSPs */
+				phw->num_dsp = 2;
+
+			/* test that the PLD is programmed */
+			/* and we can read/write 24bits */
+#define PLD_BASE_ADDRESS 0x90000000L	/*for ASI6100/6200/8800 */
+
+			switch (boot_load_family) {
+			case HPI_ADAPTER_FAMILY_ASI(0x6200):
+				/* ASI6100/6200 has 24bit path to FPGA */
+				mask = 0xFFFFFF00L;
+				/* ASI5100 uses AX6 code, */
+				/* but has no PLD r/w register to test */
+				if (HPI_ADAPTER_FAMILY_ASI(pao->pci.
+						subsys_device_id) ==
+					HPI_ADAPTER_FAMILY_ASI(0x5100))
+					mask = 0x00000000L;
+				break;
+			case HPI_ADAPTER_FAMILY_ASI(0x8800):
+				/* ASI8800 has 16bit path to FPGA */
+				mask = 0xFFFF0000L;
+				break;
+			}
+			test_data = 0xAAAAAA00L & mask;
+			/* write to 24 bit Debug register (D31-D8) */
+			hpi_write_word(pdo, PLD_BASE_ADDRESS + 4L, test_data);
+			read = hpi_read_word(pdo,
+				PLD_BASE_ADDRESS + 4L) & mask;
+			if (read != test_data) {
+				HPI_DEBUG_LOG(ERROR, "PLD %x %x\n", test_data,
+					read);
+				return HPI6000_ERROR_INIT_PLDTEST1;
+			}
+			test_data = 0x55555500L & mask;
+			hpi_write_word(pdo, PLD_BASE_ADDRESS + 4L, test_data);
+			read = hpi_read_word(pdo,
+				PLD_BASE_ADDRESS + 4L) & mask;
+			if (read != test_data) {
+				HPI_DEBUG_LOG(ERROR, "PLD %x %x\n", test_data,
+					read);
+				return HPI6000_ERROR_INIT_PLDTEST2;
+			}
+		}
+	}	/* for numDSP */
+	return 0;
+}
+
+#define PCI_TIMEOUT 100
+
+static int hpi_set_address(struct dsp_obj *pdo, u32 address)
+{
+	u32 timeout = PCI_TIMEOUT;
+
+	do {
+		iowrite32(address, pdo->prHPI_address);
+	} while (hpi6000_check_PCI2040_error_flag(pdo->pa_parent_adapter,
+			H6WRITE)
+		&& --timeout);
+
+	if (timeout)
+		return 0;
+
+	return 1;
+}
+
+/* write one word to the HPI port */
+static void hpi_write_word(struct dsp_obj *pdo, u32 address, u32 data)
+{
+	if (hpi_set_address(pdo, address))
+		return;
+	iowrite32(data, pdo->prHPI_data);
+}
+
+/* read one word from the HPI port */
+static u32 hpi_read_word(struct dsp_obj *pdo, u32 address)
+{
+	u32 data = 0;
+
+	if (hpi_set_address(pdo, address))
+		return 0;	/*? no way to return error */
+
+	/* take care of errata in revB DSP (2.0.1) */
+	data = ioread32(pdo->prHPI_data);
+	return data;
+}
+
+/* write a block of 32bit words to the DSP HPI port using auto-inc mode */
+static void hpi_write_block(struct dsp_obj *pdo, u32 address, u32 *pdata,
+	u32 length)
+{
+	u16 length16 = length - 1;
+
+	if (length == 0)
+		return;
+
+	if (hpi_set_address(pdo, address))
+		return;
+
+	iowrite32_rep(pdo->prHPI_data_auto_inc, pdata, length16);
+
+	/* take care of errata in revB DSP (2.0.1) */
+	/* must end with non auto-inc */
+	iowrite32(*(pdata + length - 1), pdo->prHPI_data);
+}
+
+/** read a block of 32bit words from the DSP HPI port using auto-inc mode
+ */
+static void hpi_read_block(struct dsp_obj *pdo, u32 address, u32 *pdata,
+	u32 length)
+{
+	u16 length16 = length - 1;
+
+	if (length == 0)
+		return;
+
+	if (hpi_set_address(pdo, address))
+		return;
+
+	ioread32_rep(pdo->prHPI_data_auto_inc, pdata, length16);
+
+	/* take care of errata in revB DSP (2.0.1) */
+	/* must end with non auto-inc */
+	*(pdata + length - 1) = ioread32(pdo->prHPI_data);
+}
+
+static u16 hpi6000_dsp_block_write32(struct hpi_adapter_obj *pao,
+	u16 dsp_index, u32 hpi_address, u32 *source, u32 count)
+{
+	struct dsp_obj *pdo =
+		&(*(struct hpi_hw_obj *)pao->priv).ado[dsp_index];
+	u32 time_out = PCI_TIMEOUT;
+	int c6711_burst_size = 128;
+	u32 local_hpi_address = hpi_address;
+	int local_count = count;
+	int xfer_size;
+	u32 *pdata = source;
+
+	while (local_count) {
+		if (local_count > c6711_burst_size)
+			xfer_size = c6711_burst_size;
+		else
+			xfer_size = local_count;
+
+		time_out = PCI_TIMEOUT;
+		do {
+			hpi_write_block(pdo, local_hpi_address, pdata,
+				xfer_size);
+		} while (hpi6000_check_PCI2040_error_flag(pao, H6WRITE)
+			&& --time_out);
+
+		if (!time_out)
+			break;
+		pdata += xfer_size;
+		local_hpi_address += sizeof(u32) * xfer_size;
+		local_count -= xfer_size;
+	}
+
+	if (time_out)
+		return 0;
+	else
+		return 1;
+}
+
+static u16 hpi6000_dsp_block_read32(struct hpi_adapter_obj *pao,
+	u16 dsp_index, u32 hpi_address, u32 *dest, u32 count)
+{
+	struct dsp_obj *pdo =
+		&(*(struct hpi_hw_obj *)pao->priv).ado[dsp_index];
+	u32 time_out = PCI_TIMEOUT;
+	int c6711_burst_size = 16;
+	u32 local_hpi_address = hpi_address;
+	int local_count = count;
+	int xfer_size;
+	u32 *pdata = dest;
+	u32 loop_count = 0;
+
+	while (local_count) {
+		if (local_count > c6711_burst_size)
+			xfer_size = c6711_burst_size;
+		else
+			xfer_size = local_count;
+
+		time_out = PCI_TIMEOUT;
+		do {
+			hpi_read_block(pdo, local_hpi_address, pdata,
+				xfer_size);
+		} while (hpi6000_check_PCI2040_error_flag(pao, H6READ)
+			&& --time_out);
+		if (!time_out)
+			break;
+
+		pdata += xfer_size;
+		local_hpi_address += sizeof(u32) * xfer_size;
+		local_count -= xfer_size;
+		loop_count++;
+	}
+
+	if (time_out)
+		return 0;
+	else
+		return 1;
+}
+
+static short hpi6000_message_response_sequence(struct hpi_adapter_obj *pao,
+	u16 dsp_index, struct hpi_message *phm, struct hpi_response *phr)
+{
+	struct hpi_hw_obj *phw = (struct hpi_hw_obj *)pao->priv;
+	struct dsp_obj *pdo = &phw->ado[dsp_index];
+	u32 timeout;
+	u16 ack;
+	u32 address;
+	u32 length;
+	u32 *p_data;
+	u16 error = 0;
+
+	/* does the DSP we are referencing exist? */
+	if (dsp_index >= phw->num_dsp)
+		return HPI6000_ERROR_MSG_INVALID_DSP_INDEX;
+
+	ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_IDLE);
+	if (ack & HPI_HIF_ERROR_MASK) {
+		pao->dsp_crashed++;
+		return HPI6000_ERROR_MSG_RESP_IDLE_TIMEOUT;
+	}
+	pao->dsp_crashed = 0;
+
+	/* send the message */
+
+	/* get the address and size */
+	if (phw->message_buffer_address_on_dsp == 0) {
+		timeout = TIMEOUT;
+		do {
+			address =
+				hpi_read_word(pdo,
+				HPI_HIF_ADDR(message_buffer_address));
+			phw->message_buffer_address_on_dsp = address;
+		} while (hpi6000_check_PCI2040_error_flag(pao, H6READ)
+			&& --timeout);
+		if (!timeout)
+			return HPI6000_ERROR_MSG_GET_ADR;
+	} else
+		address = phw->message_buffer_address_on_dsp;
+
+	/*        dwLength = sizeof(struct hpi_message); */
+	length = phm->size;
+
+	/* send it */
+	p_data = (u32 *)phm;
+	if (hpi6000_dsp_block_write32(pao, dsp_index, address, p_data,
+			(u16)length / 4))
+		return HPI6000_ERROR_MSG_RESP_BLOCKWRITE32;
+
+	if (hpi6000_send_host_command(pao, dsp_index, HPI_HIF_GET_RESP))
+		return HPI6000_ERROR_MSG_RESP_GETRESPCMD;
+	hpi6000_send_dsp_interrupt(pdo);
+
+	ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_GET_RESP);
+	if (ack & HPI_HIF_ERROR_MASK)
+		return HPI6000_ERROR_MSG_RESP_GET_RESP_ACK;
+
+	/* get the address and size */
+	if (phw->response_buffer_address_on_dsp == 0) {
+		timeout = TIMEOUT;
+		do {
+			address =
+				hpi_read_word(pdo,
+				HPI_HIF_ADDR(response_buffer_address));
+		} while (hpi6000_check_PCI2040_error_flag(pao, H6READ)
+			&& --timeout);
+		phw->response_buffer_address_on_dsp = address;
+
+		if (!timeout)
+			return HPI6000_ERROR_RESP_GET_ADR;
+	} else
+		address = phw->response_buffer_address_on_dsp;
+
+	/* read the length of the response back from the DSP */
+	timeout = TIMEOUT;
+	do {
+		length = hpi_read_word(pdo, HPI_HIF_ADDR(length));
+	} while (hpi6000_check_PCI2040_error_flag(pao, H6READ) && --timeout);
+	if (!timeout)
+		length = sizeof(struct hpi_response);
+
+	/* get it */
+	p_data = (u32 *)phr;
+	if (hpi6000_dsp_block_read32(pao, dsp_index, address, p_data,
+			(u16)length / 4))
+		return HPI6000_ERROR_MSG_RESP_BLOCKREAD32;
+
+	/* set i/f back to idle */
+	if (hpi6000_send_host_command(pao, dsp_index, HPI_HIF_IDLE))
+		return HPI6000_ERROR_MSG_RESP_IDLECMD;
+	hpi6000_send_dsp_interrupt(pdo);
+
+	error = hpi_validate_response(phm, phr);
+	return error;
+}
+
+/* have to set up the below defines to match stuff in the MAP file */
+
+#define MSG_ADDRESS (HPI_HIF_BASE+0x18)
+#define MSG_LENGTH 11
+#define RESP_ADDRESS (HPI_HIF_BASE+0x44)
+#define RESP_LENGTH 16
+#define QUEUE_START  (HPI_HIF_BASE+0x88)
+#define QUEUE_SIZE 0x8000
+
+static short hpi6000_send_data_check_adr(u32 address, u32 length_in_dwords)
+{
+/*#define CHECKING       // comment this line in to enable checking */
+#ifdef CHECKING
+	if (address < (u32)MSG_ADDRESS)
+		return 0;
+	if (address > (u32)(QUEUE_START + QUEUE_SIZE))
+		return 0;
+	if ((address + (length_in_dwords << 2)) >
+		(u32)(QUEUE_START + QUEUE_SIZE))
+		return 0;
+#else
+	(void)address;
+	(void)length_in_dwords;
+	return 1;
+#endif
+}
+
+static short hpi6000_send_data(struct hpi_adapter_obj *pao, u16 dsp_index,
+	struct hpi_message *phm, struct hpi_response *phr)
+{
+	struct dsp_obj *pdo =
+		&(*(struct hpi_hw_obj *)pao->priv).ado[dsp_index];
+	u32 data_sent = 0;
+	u16 ack;
+	u32 length, address;
+	u32 *p_data = (u32 *)phm->u.d.u.data.pb_data;
+	u16 time_out = 8;
+
+	(void)phr;
+
+	/* round dwDataSize down to nearest 4 bytes */
+	while ((data_sent < (phm->u.d.u.data.data_size & ~3L))
+		&& --time_out) {
+		ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_IDLE);
+		if (ack & HPI_HIF_ERROR_MASK)
+			return HPI6000_ERROR_SEND_DATA_IDLE_TIMEOUT;
+
+		if (hpi6000_send_host_command(pao, dsp_index,
+				HPI_HIF_SEND_DATA))
+			return HPI6000_ERROR_SEND_DATA_CMD;
+
+		hpi6000_send_dsp_interrupt(pdo);
+
+		ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_SEND_DATA);
+
+		if (ack & HPI_HIF_ERROR_MASK)
+			return HPI6000_ERROR_SEND_DATA_ACK;
+
+		do {
+			/* get the address and size */
+			address = hpi_read_word(pdo, HPI_HIF_ADDR(address));
+			/* DSP returns number of DWORDS */
+			length = hpi_read_word(pdo, HPI_HIF_ADDR(length));
+		} while (hpi6000_check_PCI2040_error_flag(pao, H6READ));
+
+		if (!hpi6000_send_data_check_adr(address, length))
+			return HPI6000_ERROR_SEND_DATA_ADR;
+
+		/* send the data. break data into 512 DWORD blocks (2K bytes)
+		 * and send using block write. 2Kbytes is the max as this is the
+		 * memory window given to the HPI data register by the PCI2040
+		 */
+
+		{
+			u32 len = length;
+			u32 blk_len = 512;
+			while (len) {
+				if (len < blk_len)
+					blk_len = len;
+				if (hpi6000_dsp_block_write32(pao, dsp_index,
+						address, p_data, blk_len))
+					return HPI6000_ERROR_SEND_DATA_WRITE;
+				address += blk_len * 4;
+				p_data += blk_len;
+				len -= blk_len;
+			}
+		}
+
+		if (hpi6000_send_host_command(pao, dsp_index, HPI_HIF_IDLE))
+			return HPI6000_ERROR_SEND_DATA_IDLECMD;
+
+		hpi6000_send_dsp_interrupt(pdo);
+
+		data_sent += length * 4;
+	}
+	if (!time_out)
+		return HPI6000_ERROR_SEND_DATA_TIMEOUT;
+	return 0;
+}
+
+static short hpi6000_get_data(struct hpi_adapter_obj *pao, u16 dsp_index,
+	struct hpi_message *phm, struct hpi_response *phr)
+{
+	struct dsp_obj *pdo =
+		&(*(struct hpi_hw_obj *)pao->priv).ado[dsp_index];
+	u32 data_got = 0;
+	u16 ack;
+	u32 length, address;
+	u32 *p_data = (u32 *)phm->u.d.u.data.pb_data;
+
+	(void)phr;	/* this parameter not used! */
+
+	/* round dwDataSize down to nearest 4 bytes */
+	while (data_got < (phm->u.d.u.data.data_size & ~3L)) {
+		ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_IDLE);
+		if (ack & HPI_HIF_ERROR_MASK)
+			return HPI6000_ERROR_GET_DATA_IDLE_TIMEOUT;
+
+		if (hpi6000_send_host_command(pao, dsp_index,
+				HPI_HIF_GET_DATA))
+			return HPI6000_ERROR_GET_DATA_CMD;
+		hpi6000_send_dsp_interrupt(pdo);
+
+		ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_GET_DATA);
+
+		if (ack & HPI_HIF_ERROR_MASK)
+			return HPI6000_ERROR_GET_DATA_ACK;
+
+		/* get the address and size */
+		do {
+			address = hpi_read_word(pdo, HPI_HIF_ADDR(address));
+			length = hpi_read_word(pdo, HPI_HIF_ADDR(length));
+		} while (hpi6000_check_PCI2040_error_flag(pao, H6READ));
+
+		/* read the data */
+		{
+			u32 len = length;
+			u32 blk_len = 512;
+			while (len) {
+				if (len < blk_len)
+					blk_len = len;
+				if (hpi6000_dsp_block_read32(pao, dsp_index,
+						address, p_data, blk_len))
+					return HPI6000_ERROR_GET_DATA_READ;
+				address += blk_len * 4;
+				p_data += blk_len;
+				len -= blk_len;
+			}
+		}
+
+		if (hpi6000_send_host_command(pao, dsp_index, HPI_HIF_IDLE))
+			return HPI6000_ERROR_GET_DATA_IDLECMD;
+		hpi6000_send_dsp_interrupt(pdo);
+
+		data_got += length * 4;
+	}
+	return 0;
+}
+
+static void hpi6000_send_dsp_interrupt(struct dsp_obj *pdo)
+{
+	iowrite32(0x00030003, pdo->prHPI_control);	/* DSPINT */
+}
+
+static short hpi6000_send_host_command(struct hpi_adapter_obj *pao,
+	u16 dsp_index, u32 host_cmd)
+{
+	struct dsp_obj *pdo =
+		&(*(struct hpi_hw_obj *)pao->priv).ado[dsp_index];
+	u32 timeout = TIMEOUT;
+
+	/* set command */
+	do {
+		hpi_write_word(pdo, HPI_HIF_ADDR(host_cmd), host_cmd);
+		/* flush the FIFO */
+		hpi_set_address(pdo, HPI_HIF_ADDR(host_cmd));
+	} while (hpi6000_check_PCI2040_error_flag(pao, H6WRITE) && --timeout);
+
+	/* reset the interrupt bit */
+	iowrite32(0x00040004, pdo->prHPI_control);
+
+	if (timeout)
+		return 0;
+	else
+		return 1;
+}
+
+/* if the PCI2040 has recorded an HPI timeout, reset the error and return 1 */
+static short hpi6000_check_PCI2040_error_flag(struct hpi_adapter_obj *pao,
+	u16 read_or_write)
+{
+	u32 hPI_error;
+
+	struct hpi_hw_obj *phw = (struct hpi_hw_obj *)pao->priv;
+
+	/* read the error bits from the PCI2040 */
+	hPI_error = ioread32(phw->dw2040_HPICSR + HPI_ERROR_REPORT);
+	if (hPI_error) {
+		/* reset the error flag */
+		iowrite32(0L, phw->dw2040_HPICSR + HPI_ERROR_REPORT);
+		phw->pCI2040HPI_error_count++;
+		if (read_or_write == 1)
+			gw_pci_read_asserts++;	   /************* inc global */
+		else
+			gw_pci_write_asserts++;
+		return 1;
+	} else
+		return 0;
+}
+
+static short hpi6000_wait_dsp_ack(struct hpi_adapter_obj *pao, u16 dsp_index,
+	u32 ack_value)
+{
+	struct dsp_obj *pdo =
+		&(*(struct hpi_hw_obj *)pao->priv).ado[dsp_index];
+	u32 ack = 0L;
+	u32 timeout;
+	u32 hPIC = 0L;
+
+	/* wait for host interrupt to signal ack is ready */
+	timeout = TIMEOUT;
+	while (--timeout) {
+		hPIC = ioread32(pdo->prHPI_control);
+		if (hPIC & 0x04)	/* 0x04 = HINT from DSP */
+			break;
+	}
+	if (timeout == 0)
+		return HPI_HIF_ERROR_MASK;
+
+	/* wait for dwAckValue */
+	timeout = TIMEOUT;
+	while (--timeout) {
+		/* read the ack mailbox */
+		ack = hpi_read_word(pdo, HPI_HIF_ADDR(dsp_ack));
+		if (ack == ack_value)
+			break;
+		if ((ack & HPI_HIF_ERROR_MASK)
+			&& !hpi6000_check_PCI2040_error_flag(pao, H6READ))
+			break;
+		/*for (i=0;i<1000;i++) */
+		/*      dwPause=i+1; */
+	}
+	if (ack & HPI_HIF_ERROR_MASK)
+		/* indicates bad read from DSP -
+		   typically 0xffffff is read for some reason */
+		ack = HPI_HIF_ERROR_MASK;
+
+	if (timeout == 0)
+		ack = HPI_HIF_ERROR_MASK;
+	return (short)ack;
+}
+
+static short hpi6000_update_control_cache(struct hpi_adapter_obj *pao,
+	struct hpi_message *phm)
+{
+	const u16 dsp_index = 0;
+	struct hpi_hw_obj *phw = (struct hpi_hw_obj *)pao->priv;
+	struct dsp_obj *pdo = &phw->ado[dsp_index];
+	u32 timeout;
+	u32 cache_dirty_flag;
+	u16 err;
+
+	hpios_dsplock_lock(pao);
+
+	timeout = TIMEOUT;
+	do {
+		cache_dirty_flag =
+			hpi_read_word((struct dsp_obj *)pdo,
+			HPI_HIF_ADDR(control_cache_is_dirty));
+	} while (hpi6000_check_PCI2040_error_flag(pao, H6READ) && --timeout);
+	if (!timeout) {
+		err = HPI6000_ERROR_CONTROL_CACHE_PARAMS;
+		goto unlock;
+	}
+
+	if (cache_dirty_flag) {
+		/* read the cached controls */
+		u32 address;
+		u32 length;
+
+		timeout = TIMEOUT;
+		if (pdo->control_cache_address_on_dsp == 0) {
+			do {
+				address =
+					hpi_read_word((struct dsp_obj *)pdo,
+					HPI_HIF_ADDR(control_cache_address));
+
+				length = hpi_read_word((struct dsp_obj *)pdo,
+					HPI_HIF_ADDR
+					(control_cache_size_in_bytes));
+			} while (hpi6000_check_PCI2040_error_flag(pao, H6READ)
+				&& --timeout);
+			if (!timeout) {
+				err = HPI6000_ERROR_CONTROL_CACHE_ADDRLEN;
+				goto unlock;
+			}
+			pdo->control_cache_address_on_dsp = address;
+			pdo->control_cache_length_on_dsp = length;
+		} else {
+			address = pdo->control_cache_address_on_dsp;
+			length = pdo->control_cache_length_on_dsp;
+		}
+
+		if (hpi6000_dsp_block_read32(pao, dsp_index, address,
+				(u32 *)&phw->control_cache[0],
+				length / sizeof(u32))) {
+			err = HPI6000_ERROR_CONTROL_CACHE_READ;
+			goto unlock;
+		}
+		do {
+			hpi_write_word((struct dsp_obj *)pdo,
+				HPI_HIF_ADDR(control_cache_is_dirty), 0);
+			/* flush the FIFO */
+			hpi_set_address(pdo, HPI_HIF_ADDR(host_cmd));
+		} while (hpi6000_check_PCI2040_error_flag(pao, H6WRITE)
+			&& --timeout);
+		if (!timeout) {
+			err = HPI6000_ERROR_CONTROL_CACHE_FLUSH;
+			goto unlock;
+		}
+
+	}
+	err = 0;
+
+unlock:
+	hpios_dsplock_unlock(pao);
+	return err;
+}
+
+/** Get dsp index for multi DSP adapters only */
+static u16 get_dsp_index(struct hpi_adapter_obj *pao, struct hpi_message *phm)
+{
+	u16 ret = 0;
+	switch (phm->object) {
+	case HPI_OBJ_ISTREAM:
+		if (phm->obj_index < 2)
+			ret = 1;
+		break;
+	case HPI_OBJ_PROFILE:
+		ret = phm->obj_index;
+		break;
+	default:
+		break;
+	}
+	return ret;
+}
+
+/** Complete transaction with DSP
+
+Send message, get response, send or get stream data if any.
+*/
+static void hw_message(struct hpi_adapter_obj *pao, struct hpi_message *phm,
+	struct hpi_response *phr)
+{
+	u16 error = 0;
+	u16 dsp_index = 0;
+	u16 num_dsp = ((struct hpi_hw_obj *)pao->priv)->num_dsp;
+	hpios_dsplock_lock(pao);
+
+	if (num_dsp < 2)
+		dsp_index = 0;
+	else {
+		dsp_index = get_dsp_index(pao, phm);
+
+		/* is this  checked on the DSP anyway? */
+		if ((phm->function == HPI_ISTREAM_GROUP_ADD)
+			|| (phm->function == HPI_OSTREAM_GROUP_ADD)) {
+			struct hpi_message hm;
+			u16 add_index;
+			hm.obj_index = phm->u.d.u.stream.stream_index;
+			hm.object = phm->u.d.u.stream.object_type;
+			add_index = get_dsp_index(pao, &hm);
+			if (add_index != dsp_index) {
+				phr->error = HPI_ERROR_NO_INTERDSP_GROUPS;
+				return;
+			}
+		}
+	}
+	error = hpi6000_message_response_sequence(pao, dsp_index, phm, phr);
+
+	/* maybe an error response */
+	if (error) {
+		/* something failed in the HPI/DSP interface */
+		phr->error = error;
+		/* just the header of the response is valid */
+		phr->size = sizeof(struct hpi_response_header);
+		goto err;
+	}
+
+	if (phr->error != 0)	/* something failed in the DSP */
+		goto err;
+
+	switch (phm->function) {
+	case HPI_OSTREAM_WRITE:
+	case HPI_ISTREAM_ANC_WRITE:
+		error = hpi6000_send_data(pao, dsp_index, phm, phr);
+		break;
+	case HPI_ISTREAM_READ:
+	case HPI_OSTREAM_ANC_READ:
+		error = hpi6000_get_data(pao, dsp_index, phm, phr);
+		break;
+	case HPI_ADAPTER_GET_ASSERT:
+		phr->u.a.adapter_index = 0;	/* dsp 0 default */
+		if (num_dsp == 2) {
+			if (!phr->u.a.adapter_type) {
+				/* no assert from dsp 0, check dsp 1 */
+				error = hpi6000_message_response_sequence(pao,
+					1, phm, phr);
+				phr->u.a.adapter_index = 1;
+			}
+		}
+	}
+
+	if (error)
+		phr->error = error;
+
+err:
+	hpios_dsplock_unlock(pao);
+	return;
+}