summaryrefslogtreecommitdiffstats
path: root/net/ipv4
diff options
context:
space:
mode:
authorPau Espin Pedrol <pau.espin@tessares.net>2016-06-07 16:30:34 +0200
committerDavid S. Miller <davem@davemloft.net>2016-06-08 00:36:18 -0700
commite00431bc93bb48c650273be4a00007b2a392d32a (patch)
treede5ae1d5ad1cfc79242c10a087697a140527b037 /net/ipv4
parent01e517f16e38fc2345d4d555a7764b5f3f35af84 (diff)
downloadblackbird-obmc-linux-e00431bc93bb48c650273be4a00007b2a392d32a.tar.gz
blackbird-obmc-linux-e00431bc93bb48c650273be4a00007b2a392d32a.zip
tcp: accept RST if SEQ matches right edge of right-most SACK block
RFC 5961 advises to only accept RST packets containing a seq number matching the next expected seq number instead of the whole receive window in order to avoid spoofing attacks. However, this situation is not optimal in the case SACK is in use at the time the RST is sent. I recently run into a scenario in which packet losses were high while uploading data to a server, and userspace was willing to frequently terminate connections by sending a RST. In this case, the ACK sent on the receiver side (rcv_nxt) is frozen waiting for a lost packet retransmission and SACK blocks are used to let the client continue uploading data. At some point later on, the client sends the RST (snd_nxt), which matches the next expected seq number of the right-most SACK block on the receiver side which is going forward receiving data. In this scenario, as RFC 5961 defines, the RST SEQ doesn't match the frozen main ACK at receiver side and thus gets dropped and a challenge ACK is sent, which gets usually lost due to network conditions. The main consequence is that the connection stays alive for a while even if it made sense to accept the RST. This can get really bad if lots of connections like this one are created in few seconds, allocating all the resources of the server easily. For security reasons, not all SACK blocks are checked (there could be a big amount of SACK blocks => acceptable SEQ numbers). Furthermore, it wouldn't make sense to check for RST in blocks other than the right-most received one because the sender is not expected to be sending new data after the RST. For simplicity, only up to the 4 most recently updated SACK blocks (selective_acks[4] field) are compared to find the right-most block, as usually those are the ones with bigger probability to contain it. This patch was tested in a 3.18 kernel and probed to improve the situation in the scenario described above. Signed-off-by: Pau Espin Pedrol <pau.espin@tessares.net> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net/ipv4')
-rw-r--r--net/ipv4/tcp_input.c26
1 files changed, 23 insertions, 3 deletions
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index d6c8f4cd0800..89dd8d82826f 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5159,6 +5159,7 @@ static bool tcp_validate_incoming(struct sock *sk, struct sk_buff *skb,
const struct tcphdr *th, int syn_inerr)
{
struct tcp_sock *tp = tcp_sk(sk);
+ bool rst_seq_match = false;
/* RFC1323: H1. Apply PAWS check first. */
if (tcp_fast_parse_options(skb, th, tp) && tp->rx_opt.saw_tstamp &&
@@ -5195,13 +5196,32 @@ static bool tcp_validate_incoming(struct sock *sk, struct sk_buff *skb,
/* Step 2: check RST bit */
if (th->rst) {
- /* RFC 5961 3.2 :
- * If sequence number exactly matches RCV.NXT, then
+ /* RFC 5961 3.2 (extend to match against SACK too if available):
+ * If seq num matches RCV.NXT or the right-most SACK block,
+ * then
* RESET the connection
* else
* Send a challenge ACK
*/
- if (TCP_SKB_CB(skb)->seq == tp->rcv_nxt)
+ if (TCP_SKB_CB(skb)->seq == tp->rcv_nxt) {
+ rst_seq_match = true;
+ } else if (tcp_is_sack(tp) && tp->rx_opt.num_sacks > 0) {
+ struct tcp_sack_block *sp = &tp->selective_acks[0];
+ int max_sack = sp[0].end_seq;
+ int this_sack;
+
+ for (this_sack = 1; this_sack < tp->rx_opt.num_sacks;
+ ++this_sack) {
+ max_sack = after(sp[this_sack].end_seq,
+ max_sack) ?
+ sp[this_sack].end_seq : max_sack;
+ }
+
+ if (TCP_SKB_CB(skb)->seq == max_sack)
+ rst_seq_match = true;
+ }
+
+ if (rst_seq_match)
tcp_reset(sk);
else
tcp_send_challenge_ack(sk, skb);
OpenPOWER on IntegriCloud