wireless: radiotap: rewrite the radiotap header file

The header file has grown a lot of #define's etc, but
they are nicer as enums, so rewrite the file from the
documentation as such.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

1 files changed, 157 insertions, 298 deletions

diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h
index d0e7e3f8e67a..d91f9e7f4d71 100644
--- a/include/net/ieee80211_radiotap.h
+++ b/include/net/ieee80211_radiotap.h
@@ -1,201 +1,54 @@
 /*
- * Copyright (c) 2003, 2004 David Young.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of David Young may not be used to endorse or promote
- *    products derived from this software without specific prior
- *    written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY DAVID YOUNG ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
- * PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL DAVID
- * YOUNG BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- */
-
-/*
- * Modifications to fit into the linux IEEE 802.11 stack,
- * Mike Kershaw (dragorn@kismetwireless.net)
+ * Copyright (c) 2017		Intel Deutschland GmbH
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
+#ifndef __RADIOTAP_H
+#define __RADIOTAP_H
 
-#ifndef IEEE80211RADIOTAP_H
-#define IEEE80211RADIOTAP_H
-
-#include <linux/if_ether.h>
 #include <linux/kernel.h>
 #include <asm/unaligned.h>
 
-/* Base version of the radiotap packet header data */
-#define PKTHDR_RADIOTAP_VERSION		0
-
-/* A generic radio capture format is desirable. There is one for
- * Linux, but it is neither rigidly defined (there were not even
- * units given for some fields) nor easily extensible.
- *
- * I suggest the following extensible radio capture format. It is
- * based on a bitmap indicating which fields are present.
- *
- * I am trying to describe precisely what the application programmer
- * should expect in the following, and for that reason I tell the
- * units and origin of each measurement (where it applies), or else I
- * use sufficiently weaselly language ("is a monotonically nondecreasing
- * function of...") that I cannot set false expectations for lawyerly
- * readers.
- */
-
-/*
- * The radio capture header precedes the 802.11 header.
- * All data in the header is little endian on all platforms.
+/**
+ * struct ieee82011_radiotap_header - base radiotap header
  */
 struct ieee80211_radiotap_header {
-	u8 it_version;		/* Version 0. Only increases
-				 * for drastic changes,
-				 * introduction of compatible
-				 * new fields does not count.
-				 */
-	u8 it_pad;
-	__le16 it_len;		/* length of the whole
-				 * header in bytes, including
-				 * it_version, it_pad,
-				 * it_len, and data fields.
-				 */
-	__le32 it_present;	/* A bitmap telling which
-				 * fields are present. Set bit 31
-				 * (0x80000000) to extend the
-				 * bitmap by another 32 bits.
-				 * Additional extensions are made
-				 * by setting bit 31.
-				 */
+	/**
+	 * @it_version: radiotap version, always 0
+	 */
+	uint8_t it_version;
+
+	/**
+	 * @it_pad: padding (or alignment)
+	 */
+	uint8_t it_pad;
+
+	/**
+	 * @it_len: overall radiotap header length
+	 */
+	__le16 it_len;
+
+	/**
+	 * @it_present: (first) present word
+	 */
+	__le32 it_present;
 } __packed;
 
-/* Name                                 Data type    Units
- * ----                                 ---------    -----
- *
- * IEEE80211_RADIOTAP_TSFT              __le64       microseconds
- *
- *      Value in microseconds of the MAC's 64-bit 802.11 Time
- *      Synchronization Function timer when the first bit of the
- *      MPDU arrived at the MAC. For received frames, only.
- *
- * IEEE80211_RADIOTAP_CHANNEL           2 x __le16   MHz, bitmap
- *
- *      Tx/Rx frequency in MHz, followed by flags (see below).
- *
- * IEEE80211_RADIOTAP_FHSS              __le16       see below
- *
- *      For frequency-hopping radios, the hop set (first byte)
- *      and pattern (second byte).
- *
- * IEEE80211_RADIOTAP_RATE              u8           500kb/s
- *
- *      Tx/Rx data rate
- *
- * IEEE80211_RADIOTAP_DBM_ANTSIGNAL     s8           decibels from
- *                                                   one milliwatt (dBm)
- *
- *      RF signal power at the antenna, decibel difference from
- *      one milliwatt.
- *
- * IEEE80211_RADIOTAP_DBM_ANTNOISE      s8           decibels from
- *                                                   one milliwatt (dBm)
- *
- *      RF noise power at the antenna, decibel difference from one
- *      milliwatt.
- *
- * IEEE80211_RADIOTAP_DB_ANTSIGNAL      u8           decibel (dB)
- *
- *      RF signal power at the antenna, decibel difference from an
- *      arbitrary, fixed reference.
- *
- * IEEE80211_RADIOTAP_DB_ANTNOISE       u8           decibel (dB)
- *
- *      RF noise power at the antenna, decibel difference from an
- *      arbitrary, fixed reference point.
- *
- * IEEE80211_RADIOTAP_LOCK_QUALITY      __le16       unitless
- *
- *      Quality of Barker code lock. Unitless. Monotonically
- *      nondecreasing with "better" lock strength. Called "Signal
- *      Quality" in datasheets.  (Is there a standard way to measure
- *      this?)
- *
- * IEEE80211_RADIOTAP_TX_ATTENUATION    __le16       unitless
- *
- *      Transmit power expressed as unitless distance from max
- *      power set at factory calibration.  0 is max power.
- *      Monotonically nondecreasing with lower power levels.
- *
- * IEEE80211_RADIOTAP_DB_TX_ATTENUATION __le16       decibels (dB)
- *
- *      Transmit power expressed as decibel distance from max power
- *      set at factory calibration.  0 is max power.  Monotonically
- *      nondecreasing with lower power levels.
- *
- * IEEE80211_RADIOTAP_DBM_TX_POWER      s8           decibels from
- *                                                   one milliwatt (dBm)
- *
- *      Transmit power expressed as dBm (decibels from a 1 milliwatt
- *      reference). This is the absolute power level measured at
- *      the antenna port.
- *
- * IEEE80211_RADIOTAP_FLAGS             u8           bitmap
- *
- *      Properties of transmitted and received frames. See flags
- *      defined below.
- *
- * IEEE80211_RADIOTAP_ANTENNA           u8           antenna index
- *
- *      Unitless indication of the Rx/Tx antenna for this packet.
- *      The first antenna is antenna 0.
- *
- * IEEE80211_RADIOTAP_RX_FLAGS          __le16       bitmap
- *
- *     Properties of received frames. See flags defined below.
- *
- * IEEE80211_RADIOTAP_TX_FLAGS          __le16       bitmap
- *
- *     Properties of transmitted frames. See flags defined below.
- *
- * IEEE80211_RADIOTAP_RTS_RETRIES       u8           data
- *
- *     Number of rts retries a transmitted frame used.
- *
- * IEEE80211_RADIOTAP_DATA_RETRIES      u8           data
- *
- *     Number of unicast retries a transmitted frame used.
- *
- * IEEE80211_RADIOTAP_MCS	u8, u8, u8		unitless
- *
- *     Contains a bitmap of known fields/flags, the flags, and
- *     the MCS index.
- *
- * IEEE80211_RADIOTAP_AMPDU_STATUS	u32, u16, u8, u8	unitless
- *
- *	Contains the AMPDU information for the subframe.
- *
- * IEEE80211_RADIOTAP_VHT	u16, u8, u8, u8[4], u8, u8, u16
- *
- *	Contains VHT information about this frame.
- *
- * IEEE80211_RADIOTAP_TIMESTAMP		u64, u16, u8, u8	variable
- *
- *	Contains timestamp information for this frame.
- */
-enum ieee80211_radiotap_type {
+/* version is always 0 */
+#define PKTHDR_RADIOTAP_VERSION	0
+
+/* see the radiotap website for the descriptions */
+enum ieee80211_radiotap_presence {
 	IEEE80211_RADIOTAP_TSFT = 0,
 	IEEE80211_RADIOTAP_FLAGS = 1,
 	IEEE80211_RADIOTAP_RATE = 2,
@@ -214,7 +67,7 @@ enum ieee80211_radiotap_type {
 	IEEE80211_RADIOTAP_TX_FLAGS = 15,
 	IEEE80211_RADIOTAP_RTS_RETRIES = 16,
 	IEEE80211_RADIOTAP_DATA_RETRIES = 17,
-
+	/* 18 is XChannel, but it's not defined yet */
 	IEEE80211_RADIOTAP_MCS = 19,
 	IEEE80211_RADIOTAP_AMPDU_STATUS = 20,
 	IEEE80211_RADIOTAP_VHT = 21,
@@ -226,129 +79,135 @@ enum ieee80211_radiotap_type {
 	IEEE80211_RADIOTAP_EXT = 31
 };
 
-/* Channel flags. */
-#define	IEEE80211_CHAN_TURBO	0x0010	/* Turbo channel */
-#define	IEEE80211_CHAN_CCK	0x0020	/* CCK channel */
-#define	IEEE80211_CHAN_OFDM	0x0040	/* OFDM channel */
-#define	IEEE80211_CHAN_2GHZ	0x0080	/* 2 GHz spectrum channel. */
-#define	IEEE80211_CHAN_5GHZ	0x0100	/* 5 GHz spectrum channel */
-#define	IEEE80211_CHAN_PASSIVE	0x0200	/* Only passive scan allowed */
-#define	IEEE80211_CHAN_DYN	0x0400	/* Dynamic CCK-OFDM channel */
-#define	IEEE80211_CHAN_GFSK	0x0800	/* GFSK channel (FHSS PHY) */
-#define	IEEE80211_CHAN_GSM	0x1000	/* GSM (900 MHz) */
-#define	IEEE80211_CHAN_STURBO	0x2000	/* Static Turbo */
-#define	IEEE80211_CHAN_HALF	0x4000	/* Half channel (10 MHz wide) */
-#define	IEEE80211_CHAN_QUARTER	0x8000	/* Quarter channel (5 MHz wide) */
-
-/* For IEEE80211_RADIOTAP_FLAGS */
-#define	IEEE80211_RADIOTAP_F_CFP	0x01	/* sent/received
-						 * during CFP
-						 */
-#define	IEEE80211_RADIOTAP_F_SHORTPRE	0x02	/* sent/received
-						 * with short
-						 * preamble
-						 */
-#define	IEEE80211_RADIOTAP_F_WEP	0x04	/* sent/received
-						 * with WEP encryption
-						 */
-#define	IEEE80211_RADIOTAP_F_FRAG	0x08	/* sent/received
-						 * with fragmentation
-						 */
-#define	IEEE80211_RADIOTAP_F_FCS	0x10	/* frame includes FCS */
-#define	IEEE80211_RADIOTAP_F_DATAPAD	0x20	/* frame has padding between
-						 * 802.11 header and payload
-						 * (to 32-bit boundary)
-						 */
-#define IEEE80211_RADIOTAP_F_BADFCS	0x40	/* bad FCS */
-
-/* For IEEE80211_RADIOTAP_RX_FLAGS */
-#define IEEE80211_RADIOTAP_F_RX_BADPLCP	0x0002	/* frame has bad PLCP */
+/* for IEEE80211_RADIOTAP_FLAGS */
+enum ieee80211_radiotap_flags {
+	IEEE80211_RADIOTAP_F_CFP = 0x01,
+	IEEE80211_RADIOTAP_F_SHORTPRE = 0x02,
+	IEEE80211_RADIOTAP_F_WEP = 0x04,
+	IEEE80211_RADIOTAP_F_FRAG = 0x08,
+	IEEE80211_RADIOTAP_F_FCS = 0x10,
+	IEEE80211_RADIOTAP_F_DATAPAD = 0x20,
+	IEEE80211_RADIOTAP_F_BADFCS = 0x40,
+};
 
-/* For IEEE80211_RADIOTAP_TX_FLAGS */
-#define IEEE80211_RADIOTAP_F_TX_FAIL	0x0001	/* failed due to excessive
-						 * retries */
-#define IEEE80211_RADIOTAP_F_TX_CTS	0x0002	/* used cts 'protection' */
-#define IEEE80211_RADIOTAP_F_TX_RTS	0x0004	/* used rts/cts handshake */
-#define IEEE80211_RADIOTAP_F_TX_NOACK	0x0008	/* don't expect an ack */
+/* for IEEE80211_RADIOTAP_CHANNEL */
+enum ieee80211_radiotap_channel_flags {
+	IEEE80211_CHAN_CCK = 0x0020,
+	IEEE80211_CHAN_OFDM = 0x0040,
+	IEEE80211_CHAN_2GHZ = 0x0080,
+	IEEE80211_CHAN_5GHZ = 0x0100,
+	IEEE80211_CHAN_DYN = 0x0400,
+	IEEE80211_CHAN_HALF = 0x4000,
+	IEEE80211_CHAN_QUARTER = 0x8000,
+};
 
+/* for IEEE80211_RADIOTAP_RX_FLAGS */
+enum ieee80211_radiotap_rx_flags {
+	IEEE80211_RADIOTAP_F_RX_BADPLCP = 0x0002,
+};
 
-/* For IEEE80211_RADIOTAP_MCS */
-#define IEEE80211_RADIOTAP_MCS_HAVE_BW		0x01
-#define IEEE80211_RADIOTAP_MCS_HAVE_MCS		0x02
-#define IEEE80211_RADIOTAP_MCS_HAVE_GI		0x04
-#define IEEE80211_RADIOTAP_MCS_HAVE_FMT		0x08
-#define IEEE80211_RADIOTAP_MCS_HAVE_FEC		0x10
-#define IEEE80211_RADIOTAP_MCS_HAVE_STBC	0x20
+/* for IEEE80211_RADIOTAP_TX_FLAGS */
+enum ieee80211_radiotap_tx_flags {
+	IEEE80211_RADIOTAP_F_TX_FAIL = 0x0001,
+	IEEE80211_RADIOTAP_F_TX_CTS = 0x0002,
+	IEEE80211_RADIOTAP_F_TX_RTS = 0x0004,
+	IEEE80211_RADIOTAP_F_TX_NOACK = 0x0008,
+};
 
-#define IEEE80211_RADIOTAP_MCS_BW_MASK		0x03
-#define		IEEE80211_RADIOTAP_MCS_BW_20	0
-#define		IEEE80211_RADIOTAP_MCS_BW_40	1
-#define		IEEE80211_RADIOTAP_MCS_BW_20L	2
-#define		IEEE80211_RADIOTAP_MCS_BW_20U	3
-#define IEEE80211_RADIOTAP_MCS_SGI		0x04
-#define IEEE80211_RADIOTAP_MCS_FMT_GF		0x08
-#define IEEE80211_RADIOTAP_MCS_FEC_LDPC		0x10
-#define IEEE80211_RADIOTAP_MCS_STBC_MASK	0x60
-#define		IEEE80211_RADIOTAP_MCS_STBC_1	1
-#define		IEEE80211_RADIOTAP_MCS_STBC_2	2
-#define		IEEE80211_RADIOTAP_MCS_STBC_3	3
+/* for IEEE80211_RADIOTAP_MCS "have" flags */
+enum ieee80211_radiotap_mcs_have {
+	IEEE80211_RADIOTAP_MCS_HAVE_BW = 0x01,
+	IEEE80211_RADIOTAP_MCS_HAVE_MCS = 0x02,
+	IEEE80211_RADIOTAP_MCS_HAVE_GI = 0x04,
+	IEEE80211_RADIOTAP_MCS_HAVE_FMT = 0x08,
+	IEEE80211_RADIOTAP_MCS_HAVE_FEC = 0x10,
+	IEEE80211_RADIOTAP_MCS_HAVE_STBC = 0x20,
+};
 
-#define IEEE80211_RADIOTAP_MCS_STBC_SHIFT	5
+enum ieee80211_radiotap_mcs_flags {
+	IEEE80211_RADIOTAP_MCS_BW_MASK = 0x03,
+	IEEE80211_RADIOTAP_MCS_BW_20 = 0,
+	IEEE80211_RADIOTAP_MCS_BW_40 = 1,
+	IEEE80211_RADIOTAP_MCS_BW_20L = 2,
+	IEEE80211_RADIOTAP_MCS_BW_20U = 3,
+
+	IEEE80211_RADIOTAP_MCS_SGI = 0x04,
+	IEEE80211_RADIOTAP_MCS_FMT_GF = 0x08,
+	IEEE80211_RADIOTAP_MCS_FEC_LDPC = 0x10,
+	IEEE80211_RADIOTAP_MCS_STBC_MASK = 0x60,
+	IEEE80211_RADIOTAP_MCS_STBC_1 = 1,
+	IEEE80211_RADIOTAP_MCS_STBC_2 = 2,
+	IEEE80211_RADIOTAP_MCS_STBC_3 = 3,
+	IEEE80211_RADIOTAP_MCS_STBC_SHIFT = 5,
+};
 
-/* For IEEE80211_RADIOTAP_AMPDU_STATUS */
-#define IEEE80211_RADIOTAP_AMPDU_REPORT_ZEROLEN		0x0001
-#define IEEE80211_RADIOTAP_AMPDU_IS_ZEROLEN		0x0002
-#define IEEE80211_RADIOTAP_AMPDU_LAST_KNOWN		0x0004
-#define IEEE80211_RADIOTAP_AMPDU_IS_LAST		0x0008
-#define IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_ERR		0x0010
-#define IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_KNOWN	0x0020
+/* for IEEE80211_RADIOTAP_AMPDU_STATUS */
+enum ieee80211_radiotap_ampdu_flags {
+	IEEE80211_RADIOTAP_AMPDU_REPORT_ZEROLEN = 0x0001,
+	IEEE80211_RADIOTAP_AMPDU_IS_ZEROLEN = 0x0002,
+	IEEE80211_RADIOTAP_AMPDU_LAST_KNOWN = 0x0004,
+	IEEE80211_RADIOTAP_AMPDU_IS_LAST = 0x0008,
+	IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_ERR = 0x0010,
+	IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_KNOWN = 0x0020,
+};
 
-/* For IEEE80211_RADIOTAP_VHT */
-#define IEEE80211_RADIOTAP_VHT_KNOWN_STBC			0x0001
-#define IEEE80211_RADIOTAP_VHT_KNOWN_TXOP_PS_NA			0x0002
-#define IEEE80211_RADIOTAP_VHT_KNOWN_GI				0x0004
-#define IEEE80211_RADIOTAP_VHT_KNOWN_SGI_NSYM_DIS		0x0008
-#define IEEE80211_RADIOTAP_VHT_KNOWN_LDPC_EXTRA_OFDM_SYM	0x0010
-#define IEEE80211_RADIOTAP_VHT_KNOWN_BEAMFORMED			0x0020
-#define IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH			0x0040
-#define IEEE80211_RADIOTAP_VHT_KNOWN_GROUP_ID			0x0080
-#define IEEE80211_RADIOTAP_VHT_KNOWN_PARTIAL_AID		0x0100
+/* for IEEE80211_RADIOTAP_VHT */
+enum ieee80211_radiotap_vht_known {
+	IEEE80211_RADIOTAP_VHT_KNOWN_STBC = 0x0001,
+	IEEE80211_RADIOTAP_VHT_KNOWN_TXOP_PS_NA = 0x0002,
+	IEEE80211_RADIOTAP_VHT_KNOWN_GI = 0x0004,
+	IEEE80211_RADIOTAP_VHT_KNOWN_SGI_NSYM_DIS = 0x0008,
+	IEEE80211_RADIOTAP_VHT_KNOWN_LDPC_EXTRA_OFDM_SYM = 0x0010,
+	IEEE80211_RADIOTAP_VHT_KNOWN_BEAMFORMED = 0x0020,
+	IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH = 0x0040,
+	IEEE80211_RADIOTAP_VHT_KNOWN_GROUP_ID = 0x0080,
+	IEEE80211_RADIOTAP_VHT_KNOWN_PARTIAL_AID = 0x0100,
+};
 
-#define IEEE80211_RADIOTAP_VHT_FLAG_STBC			0x01
-#define IEEE80211_RADIOTAP_VHT_FLAG_TXOP_PS_NA			0x02
-#define IEEE80211_RADIOTAP_VHT_FLAG_SGI				0x04
-#define IEEE80211_RADIOTAP_VHT_FLAG_SGI_NSYM_M10_9		0x08
-#define IEEE80211_RADIOTAP_VHT_FLAG_LDPC_EXTRA_OFDM_SYM		0x10
-#define IEEE80211_RADIOTAP_VHT_FLAG_BEAMFORMED			0x20
+enum ieee80211_radiotap_vht_flags {
+	IEEE80211_RADIOTAP_VHT_FLAG_STBC = 0x01,
+	IEEE80211_RADIOTAP_VHT_FLAG_TXOP_PS_NA = 0x02,
+	IEEE80211_RADIOTAP_VHT_FLAG_SGI = 0x04,
+	IEEE80211_RADIOTAP_VHT_FLAG_SGI_NSYM_M10_9 = 0x08,
+	IEEE80211_RADIOTAP_VHT_FLAG_LDPC_EXTRA_OFDM_SYM = 0x10,
+	IEEE80211_RADIOTAP_VHT_FLAG_BEAMFORMED = 0x20,
+};
 
-#define IEEE80211_RADIOTAP_CODING_LDPC_USER0			0x01
-#define IEEE80211_RADIOTAP_CODING_LDPC_USER1			0x02
-#define IEEE80211_RADIOTAP_CODING_LDPC_USER2			0x04
-#define IEEE80211_RADIOTAP_CODING_LDPC_USER3			0x08
+enum ieee80211_radiotap_vht_coding {
+	IEEE80211_RADIOTAP_CODING_LDPC_USER0 = 0x01,
+	IEEE80211_RADIOTAP_CODING_LDPC_USER1 = 0x02,
+	IEEE80211_RADIOTAP_CODING_LDPC_USER2 = 0x04,
+	IEEE80211_RADIOTAP_CODING_LDPC_USER3 = 0x08,
+};
 
-/* For IEEE80211_RADIOTAP_TIMESTAMP */
-#define IEEE80211_RADIOTAP_TIMESTAMP_UNIT_MASK			0x000F
-#define IEEE80211_RADIOTAP_TIMESTAMP_UNIT_MS			0x0000
-#define IEEE80211_RADIOTAP_TIMESTAMP_UNIT_US			0x0001
-#define IEEE80211_RADIOTAP_TIMESTAMP_UNIT_NS			0x0003
-#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_MASK			0x00F0
-#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_BEGIN_MDPU		0x0000
-#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_PLCP_SIG_ACQ		0x0010
-#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_EO_PPDU		0x0020
-#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_EO_MPDU		0x0030
-#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_UNKNOWN		0x00F0
+/* for IEEE80211_RADIOTAP_TIMESTAMP */
+enum ieee80211_radiotap_timestamp_unit_spos {
+	IEEE80211_RADIOTAP_TIMESTAMP_UNIT_MASK = 0x000F,
+	IEEE80211_RADIOTAP_TIMESTAMP_UNIT_MS = 0x0000,
+	IEEE80211_RADIOTAP_TIMESTAMP_UNIT_US = 0x0001,
+	IEEE80211_RADIOTAP_TIMESTAMP_UNIT_NS = 0x0003,
+	IEEE80211_RADIOTAP_TIMESTAMP_SPOS_MASK = 0x00F0,
+	IEEE80211_RADIOTAP_TIMESTAMP_SPOS_BEGIN_MDPU = 0x0000,
+	IEEE80211_RADIOTAP_TIMESTAMP_SPOS_PLCP_SIG_ACQ = 0x0010,
+	IEEE80211_RADIOTAP_TIMESTAMP_SPOS_EO_PPDU = 0x0020,
+	IEEE80211_RADIOTAP_TIMESTAMP_SPOS_EO_MPDU = 0x0030,
+	IEEE80211_RADIOTAP_TIMESTAMP_SPOS_UNKNOWN = 0x00F0,
+};
 
-#define IEEE80211_RADIOTAP_TIMESTAMP_FLAG_64BIT			0x00
-#define IEEE80211_RADIOTAP_TIMESTAMP_FLAG_32BIT			0x01
-#define IEEE80211_RADIOTAP_TIMESTAMP_FLAG_ACCURACY		0x02
+enum ieee80211_radiotap_timestamp_flags {
+	IEEE80211_RADIOTAP_TIMESTAMP_FLAG_64BIT = 0x00,
+	IEEE80211_RADIOTAP_TIMESTAMP_FLAG_32BIT = 0x01,
+	IEEE80211_RADIOTAP_TIMESTAMP_FLAG_ACCURACY = 0x02,
+};
 
-/* helpers */
-static inline int ieee80211_get_radiotap_len(unsigned char *data)
+/**
+ * ieee80211_get_radiotap_len - get radiotap header length
+ */
+static inline u16 ieee80211_get_radiotap_len(const char *data)
 {
-	struct ieee80211_radiotap_header *hdr =
-		(struct ieee80211_radiotap_header *)data;
+	struct ieee80211_radiotap_header *hdr = (void *)data;
 
 	return get_unaligned_le16(&hdr->it_len);
 }
 
-#endif				/* IEEE80211_RADIOTAP_H */
+#endif /* __RADIOTAP_H */