Staging: sep: Move the RAR support into staging where it is supposed to be

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

6 files changed, 571 insertions, 0 deletions

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 2860bd5704fc..9548ec0f7cd3 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -135,6 +135,8 @@ source "drivers/staging/hv/Kconfig"
 
 source "drivers/staging/vme/Kconfig"
 
+source "drivers/staging/rar/Kconfig"
+
 source "drivers/staging/sep/Kconfig"
 
 endif # !STAGING_EXCLUDE_BUILD
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index ce6523c02f98..edd0c0611433 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -49,4 +49,5 @@ obj-$(CONFIG_USB_CPC)		+= cpc-usb/
 obj-$(CONFIG_FB_UDL)		+= udlfb/
 obj-$(CONFIG_HYPERV)		+= hv/
 obj-$(CONFIG_VME_BUS)		+= vme/
+obj-$(CONFIG_RAR_REGISTER)	+= rar/
 obj-$(CONFIG_DX_SEP)		+= sep/
diff --git a/drivers/staging/rar/Kconfig b/drivers/staging/rar/Kconfig
new file mode 100644
index 000000000000..17f8bf3bb41a
--- /dev/null
+++ b/drivers/staging/rar/Kconfig
@@ -0,0 +1,17 @@
+#
+# RAR device configuration
+#
+
+menu "RAR Register Driver"
+#
+#	Restricted Access Register Manager
+#
+config RAR_REGISTER
+	tristate "Restricted Access Region Register Driver"
+	default n
+	---help---
+		This driver allows other kernel drivers access to the
+		contents of the restricted access region control
+		registers.
+
+endmenu
diff --git a/drivers/staging/rar/Makefile b/drivers/staging/rar/Makefile
new file mode 100644
index 000000000000..5422ed04ccf1
--- /dev/null
+++ b/drivers/staging/rar/Makefile
@@ -0,0 +1,2 @@
+EXTRA_CFLAGS += -DLITTLE__ENDIAN
+obj-$(CONFIG_RAR_REGISTER) += rar_driver.o
diff --git a/drivers/staging/rar/rar_driver.c b/drivers/staging/rar/rar_driver.c
new file mode 100644
index 000000000000..8c4463e2f620
--- /dev/null
+++ b/drivers/staging/rar/rar_driver.c
@@ -0,0 +1,450 @@
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/kdev_t.h>
+#include <linux/semaphore.h>
+#include <linux/mm.h>
+#include <linux/poll.h>
+#include <linux/wait.h>
+#include <linux/ioctl.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/pagemap.h>
+#include <linux/pci.h>
+#include <linux/firmware.h>
+#include <linux/sched.h>
+#include "rar_driver.h"
+
+/* PCI vendor id for controler */
+#define VENDOR_ID 0x8086
+
+/* PCI device id for controler */
+#define DEVICE_ID 0x4110
+
+/* The following defines are for the IPC process to retrieve RAR in */
+
+/* === Lincroft Message Bus Interface === */
+/* Message Control Register */
+#define LNC_MCR_OFFSET 0xD0
+
+/* Message Data Register */
+#define LNC_MDR_OFFSET 0xD4
+
+/* Message Opcodes */
+#define LNC_MESSAGE_READ_OPCODE  0xD0
+#define LNC_MESSAGE_WRITE_OPCODE 0xE0
+
+/* Message Write Byte Enables */
+#define LNC_MESSAGE_BYTE_WRITE_ENABLES 0xF
+
+/* B-unit Port */
+#define LNC_BUNIT_PORT 0x3
+
+/* === Lincroft B-Unit Registers - Programmed by IA32 firmware === */
+#define LNC_BRAR0L  0x10
+#define LNC_BRAR0H  0x11
+#define LNC_BRAR1L  0x12
+#define LNC_BRAR1H  0x13
+
+/* Reserved for SeP */
+#define LNC_BRAR2L  0x14
+#define LNC_BRAR2H  0x15
+
+
+/* This structure is only used during module initialization. */
+struct RAR_offsets {
+	int low; /* Register offset for low RAR physical address. */
+	int high; /* Register offset for high RAR physical address. */
+};
+
+struct pci_dev *rar_dev;
+static uint32_t registered;
+
+/* Moorestown supports three restricted access regions. */
+#define MRST_NUM_RAR 3
+
+struct RAR_address_struct rar_addr[MRST_NUM_RAR];
+
+/* prototype for init */
+static int __init rar_init_handler(void);
+static void __exit rar_exit_handler(void);
+
+/*
+  function that is activated on the succesfull probe of the RAR device
+*/
+static int __devinit rar_probe(struct pci_dev *pdev, struct pci_device_id *ent);
+
+static struct pci_device_id rar_pci_id_tbl[] = {
+	{ PCI_DEVICE(VENDOR_ID, DEVICE_ID) },
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, rar_pci_id_tbl);
+
+/* field for registering driver to PCI device */
+static struct pci_driver rar_pci_driver = {
+	.name = "rar_driver",
+	.id_table = rar_pci_id_tbl,
+	.probe = rar_probe
+};
+
+/* This function is used to retrieved RAR info using the IPC message
+   bus interface */
+static int memrar_get_rar_addr(struct pci_dev* pdev,
+	                      int offset,
+	                      u32 *addr)
+{
+	/*
+	 * ======== The Lincroft Message Bus Interface ========
+	 * Lincroft registers may be obtained from the PCI
+	 * (the Host Bridge) using the Lincroft Message Bus
+	 * Interface.  That message bus interface is generally
+	 * comprised of two registers: a control register (MCR, 0xDO)
+	 * and a data register (MDR, 0xD4).
+	 *
+	 * The MCR (message control register) format is the following:
+	 *   1.  [31:24]: Opcode
+	 *   2.  [23:16]: Port
+	 *   3.  [15:8]: Register Offset
+	 *   4.  [7:4]: Byte Enables (use 0xF to set all of these bits
+	 *              to 1)
+	 *   5.  [3:0]: reserved
+	 *
+	 *  Read (0xD0) and write (0xE0) opcodes are written to the
+	 *  control register when reading and writing to Lincroft
+	 *  registers, respectively.
+	 *
+	 *  We're interested in registers found in the Lincroft
+	 *  B-unit.  The B-unit port is 0x3.
+	 *
+	 *  The six B-unit RAR register offsets we use are listed
+	 *  earlier in this file.
+	 *
+	 *  Lastly writing to the MCR register requires the "Byte
+	 *  enables" bits to be set to 1.  This may be achieved by
+	 *  writing 0xF at bit 4.
+	 *
+	 * The MDR (message data register) format is the following:
+	 *   1. [31:0]: Read/Write Data
+	 *
+	 *  Data being read from this register is only available after
+	 *  writing the appropriate control message to the MCR
+	 *  register.
+	 *
+	 *  Data being written to this register must be written before
+	 *  writing the appropriate control message to the MCR
+	 *  register.
+	 */
+
+	int result = 0; /* result */
+	/* Construct control message */
+	u32 const message =
+	       (LNC_MESSAGE_READ_OPCODE << 24)
+	       | (LNC_BUNIT_PORT << 16)
+	       | (offset << 8)
+	       | (LNC_MESSAGE_BYTE_WRITE_ENABLES << 4);
+
+	printk(KERN_WARNING "rar- offset to LNC MSG is %x\n",offset);
+
+	if (addr == 0)
+		return -EINVAL;
+
+	/* Send the control message */
+	result = pci_write_config_dword(pdev,
+	                          LNC_MCR_OFFSET,
+	                          message);
+
+	printk(KERN_WARNING "rar- result from send ctl register is %x\n"
+	  ,result);
+
+	if (!result)
+		result = pci_read_config_dword(pdev,
+		                              LNC_MDR_OFFSET,
+				              addr);
+
+	printk(KERN_WARNING "rar- result from read data register is %x\n",
+	  result);
+
+	printk(KERN_WARNING "rar- value read from data register is %x\n",
+	  *addr);
+
+	if (result)
+		return -1;
+	else
+		return 0;
+}
+
+static int memrar_set_rar_addr(struct pci_dev* pdev,
+	                      int offset,
+	                      u32 addr)
+{
+	/*
+	 * ======== The Lincroft Message Bus Interface ========
+	 * Lincroft registers may be obtained from the PCI
+	 * (the Host Bridge) using the Lincroft Message Bus
+	 * Interface.  That message bus interface is generally
+	 * comprised of two registers: a control register (MCR, 0xDO)
+	 * and a data register (MDR, 0xD4).
+	 *
+	 * The MCR (message control register) format is the following:
+	 *   1.  [31:24]: Opcode
+	 *   2.  [23:16]: Port
+	 *   3.  [15:8]: Register Offset
+	 *   4.  [7:4]: Byte Enables (use 0xF to set all of these bits
+	 *              to 1)
+	 *   5.  [3:0]: reserved
+	 *
+	 *  Read (0xD0) and write (0xE0) opcodes are written to the
+	 *  control register when reading and writing to Lincroft
+	 *  registers, respectively.
+	 *
+	 *  We're interested in registers found in the Lincroft
+	 *  B-unit.  The B-unit port is 0x3.
+	 *
+	 *  The six B-unit RAR register offsets we use are listed
+	 *  earlier in this file.
+	 *
+	 *  Lastly writing to the MCR register requires the "Byte
+	 *  enables" bits to be set to 1.  This may be achieved by
+	 *  writing 0xF at bit 4.
+	 *
+	 * The MDR (message data register) format is the following:
+	 *   1. [31:0]: Read/Write Data
+	 *
+	 *  Data being read from this register is only available after
+	 *  writing the appropriate control message to the MCR
+	 *  register.
+	 *
+	 *  Data being written to this register must be written before
+	 *  writing the appropriate control message to the MCR
+	 *  register.
+	 */
+
+	int result = 0; /* result */
+
+	/* Construct control message */
+	u32 const message =
+	       (LNC_MESSAGE_WRITE_OPCODE << 24)
+	       | (LNC_BUNIT_PORT << 16)
+	       | (offset << 8)
+	       | (LNC_MESSAGE_BYTE_WRITE_ENABLES << 4);
+
+	printk(KERN_WARNING "rar- offset to LNC MSG is %x\n",offset);
+
+	if (addr == 0)
+		return -EINVAL;
+
+	/* Send the control message */
+	result = pci_write_config_dword(pdev,
+	                          LNC_MDR_OFFSET,
+	                          addr);
+
+	printk(KERN_WARNING "rar- result from send ctl register is %x\n"
+	  ,result);
+
+	if (!result)
+		result = pci_write_config_dword(pdev,
+		                              LNC_MCR_OFFSET,
+				              message);
+
+	printk(KERN_WARNING "rar- result from write data register is %x\n",
+	  result);
+
+	printk(KERN_WARNING "rar- value read to data register is %x\n",
+	  addr);
+
+	if (result)
+		return -1;
+	else
+		return 0;
+}
+
+/*
+
+ * Initialize RAR parameters, such as physical addresses, etc.
+
+ */
+static int memrar_init_rar_params(struct pci_dev *pdev)
+{
+	struct RAR_offsets const offsets[] = {
+	       { LNC_BRAR0L, LNC_BRAR0H },
+	       { LNC_BRAR1L, LNC_BRAR1H },
+	       { LNC_BRAR2L, LNC_BRAR2H }
+	};
+
+	size_t const num_offsets = sizeof(offsets) / sizeof(offsets[0]);
+	struct RAR_offsets const *end = offsets + num_offsets;
+	struct RAR_offsets const *i;
+	unsigned int n = 0;
+	int result = 0;
+
+	/* Retrieve RAR start and end physical addresses. */
+
+	/*
+	 * Access the RAR registers through the Lincroft Message Bus
+	 * Interface on PCI device: 00:00.0 Host bridge.
+	 */
+
+	/* struct pci_dev *pdev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0)); */
+
+	if (pdev == NULL)
+	       return -ENODEV;
+
+	for (i = offsets; i != end; ++i, ++n) {
+	       if (memrar_get_rar_addr (pdev,
+		                       (*i).low,
+		                       &(rar_addr[n].low)) != 0
+		   || memrar_get_rar_addr (pdev,
+		                          (*i).high,
+		                          &(rar_addr[n].high)) != 0) {
+		       result = -1;
+		       break;
+	       }
+	}
+
+	/* Done accessing the device. */
+	/* pci_dev_put(pdev); */
+
+	if (result == 0) {
+	if(1) {
+	       size_t z;
+	       for (z = 0; z != MRST_NUM_RAR; ++z) {
+			printk(KERN_WARNING "rar - BRAR[%u] physical address low\n"
+			     "\tlow:  0x%08x\n"
+			     "\thigh: 0x%08x\n",
+			     z,
+			     rar_addr[z].low,
+			     rar_addr[z].high);
+			}
+	       }
+	}
+
+	return result;
+}
+
+/*
+  function that is activaed on the succesfull probe of the RAR device
+*/
+static int __devinit rar_probe(struct pci_dev *pdev, struct pci_device_id *ent)
+{
+	/* error */
+	int error;
+
+	/*------------------------
+	CODE
+	---------------------------*/
+
+	DEBUG_PRINT_0(RAR_DEBUG_LEVEL_EXTENDED,
+	  "Rar pci probe starting\n");
+	error = 0;
+
+	/* enable the device */
+	error = pci_enable_device(pdev);
+	if (error) {
+		DEBUG_PRINT_0(RAR_DEBUG_LEVEL_EXTENDED,
+		  "error enabling pci device\n");
+		goto end_function;
+	}
+
+	rar_dev = pdev;
+	registered = 1;
+
+	/* Initialize the RAR parameters, which have to be retrieved */
+	/* via the message bus service */
+	error=memrar_init_rar_params(rar_dev);
+
+	if (error) {
+		DEBUG_PRINT_0(RAR_DEBUG_LEVEL_EXTENDED,
+		  "error getting RAR addresses device\n");
+		registered = 0;
+		goto end_function;
+		}
+
+end_function:
+
+	return error;
+}
+
+/*
+  this function registers th driver to
+  the device subsystem( either PCI, USB, etc)
+*/
+static int __init rar_init_handler(void)
+{
+	return pci_register_driver(&rar_pci_driver);
+}
+
+static void __exit rar_exit_handler(void)
+{
+	pci_unregister_driver(&rar_pci_driver);
+}
+
+module_init(rar_init_handler);
+module_exit(rar_exit_handler);
+
+MODULE_LICENSE("GPL");
+
+
+/* The get_rar_address function is used by other device drivers
+ * to obtain RAR address information on a RAR. It takes two
+ * parameter:
+ *
+ * int rar_index
+ * The rar_index is an index to the rar for which you wish to retrieve
+ * the address information.
+ * Values can be 0,1, or 2.
+ *
+ * struct RAR_address_struct is a pointer to a place to which the function
+ * can return the address structure for the RAR.
+ *
+ * The function returns a 0 upon success or a -1 if there is no RAR
+ * facility on this system.
+ */
+int get_rar_address(int rar_index,struct RAR_address_struct *addresses)
+{
+	if (registered && (rar_index < 3) && (rar_index >= 0)) {
+		*addresses=rar_addr[rar_index];
+		/* strip off lock bit information  */
+		addresses->low = addresses->low & 0xfffffff0;
+		addresses->high = addresses->high & 0xfffffff0;
+		return 0;
+		}
+
+	else {
+		return -ENODEV;
+		}
+}
+
+
+EXPORT_SYMBOL(get_rar_address);
+
+/* The lock_rar function is ued by other device drivers to lock an RAR.
+ * once an RAR is locked, it stays locked until the next system reboot.
+ * The function takes one parameter:
+ *
+ * int rar_index
+ * The rar_index is an index to the rar that you want to lock.
+ * Values can be 0,1, or 2.
+ *
+ * The function returns a 0 upon success or a -1 if there is no RAR
+ * facility on this system.
+ */
+int lock_rar(int rar_index)
+{
+	u32 working_addr;
+	int result;
+if (registered && (rar_index < 3) && (rar_index >= 0)) {
+	/* first make sure that lock bits are clear (this does lock) */
+	working_addr=rar_addr[rar_index].low & 0xfffffff0;
+
+	/* now send that value to the register using the IPC */
+        result=memrar_set_rar_addr(rar_dev,rar_index,working_addr);
+	return result;
+	}
+
+else {
+	return -ENODEV;
+	}
+}
diff --git a/drivers/staging/rar/rar_driver.h b/drivers/staging/rar/rar_driver.h
new file mode 100644
index 000000000000..3690f984ff55
--- /dev/null
+++ b/drivers/staging/rar/rar_driver.h
@@ -0,0 +1,99 @@
+/* === RAR Physical Addresses === */
+struct RAR_address_struct {
+        u32 low;
+        u32 high;
+};
+
+/* The get_rar_address function is used by other device drivers
+ * to obtain RAR address information on a RAR. It takes two
+ * parameter:
+ *
+ * int rar_index
+ * The rar_index is an index to the rar for which you wish to retrieve
+ * the address information.
+ * Values can be 0,1, or 2.
+ *
+ * struct RAR_address_struct is a pointer to a place to which the function
+ * can return the address structure for the RAR.
+ *
+ * The function returns a 0 upon success or a -1 if there is no RAR
+ * facility on this system.
+ */
+int get_rar_address(int rar_index,struct RAR_address_struct *addresses);
+
+
+/* The lock_rar function is ued by other device drivers to lock an RAR.
+ * once an RAR is locked, it stays locked until the next system reboot.
+ * The function takes one parameter:
+ *
+ * int rar_index
+ * The rar_index is an index to the rar that you want to lock.
+ * Values can be 0,1, or 2.
+ *
+ * The function returns a 0 upon success or a -1 if there is no RAR
+ * facility on this system.
+ */
+int lock_rar(int rar_index);
+
+
+/* DEBUG LEVEL MASKS */
+#define RAR_DEBUG_LEVEL_BASIC       0x1
+
+#define RAR_DEBUG_LEVEL_REGISTERS   0x2
+
+#define RAR_DEBUG_LEVEL_EXTENDED    0x4
+
+#define DEBUG_LEVEL	0x7
+
+/* FUNCTIONAL MACROS */
+
+/* debug macro without paramaters */
+#define DEBUG_PRINT_0(DEBUG_LEVEL , info) \
+do \
+{ \
+  if(DEBUG_LEVEL) \
+  { \
+    printk(KERN_WARNING info); \
+  } \
+}while(0)
+
+/* debug macro with 1 paramater */
+#define DEBUG_PRINT_1(DEBUG_LEVEL , info , param1) \
+do \
+{ \
+  if(DEBUG_LEVEL) \
+  { \
+    printk(KERN_WARNING info , param1); \
+  } \
+}while(0)
+
+/* debug macro with 2 paramaters */
+#define DEBUG_PRINT_2(DEBUG_LEVEL , info , param1, param2) \
+do \
+{ \
+  if(DEBUG_LEVEL) \
+  { \
+    printk(KERN_WARNING info , param1, param2); \
+  } \
+}while(0)
+
+/* debug macro with 3 paramaters */
+#define DEBUG_PRINT_3(DEBUG_LEVEL , info , param1, param2 , param3) \
+do \
+{ \
+  if(DEBUG_LEVEL) \
+  { \
+    printk(KERN_WARNING info , param1, param2 , param3); \
+  } \
+}while(0)
+
+/* debug macro with 4 paramaters */
+#define DEBUG_PRINT_4(DEBUG_LEVEL , info , param1, param2 , param3 , param4) \
+do \
+{ \
+  if(DEBUG_LEVEL) \
+  { \
+    printk(KERN_WARNING info , param1, param2 , param3 , param4); \
+  } \
+}while(0)
+