Merge tag 'usb-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB 3.5-rc1 changes from Greg Kroah-Hartman:
 "Here is the big USB 3.5-rc1 pull request for the 3.5-rc1 merge window.

  It's touches a lot of different parts of the kernel, all USB drivers,
  due to some API cleanups (getting rid of the ancient err() macro) and
  some changes that are needed for USB 3.0 power management updates.

  There are also lots of new drivers, pimarily gadget, but others as
  well.  We deleted a staging driver, which was nice, and finally
  dropped the obsolete usbfs code, which will make Al happy to never
  have to touch that again.

  There were some build errors in the tree that linux-next found a few
  days ago, but those were fixed by the most recent changes (all were
  due to us not building with CONFIG_PM disabled.)

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (477 commits)
  xhci: Fix DIV_ROUND_UP compile error.
  xhci: Fix compile with CONFIG_USB_SUSPEND=n
  USB: Fix core compile with CONFIG_USB_SUSPEND=n
  brcm80211: Fix compile error for .disable_hub_initiated_lpm.
  Revert "USB: EHCI: work around bug in the Philips ISP1562 controller"
  MAINTAINERS: Add myself as maintainer to the USB PHY Layer
  USB: EHCI: fix command register configuration lost problem
  USB: Remove races in devio.c
  USB: ehci-platform: remove update_device
  USB: Disable hub-initiated LPM for comms devices.
  xhci: Add Intel U1/U2 timeout policy.
  xhci: Add infrastructure for host-specific LPM policies.
  USB: Add macros for interrupt endpoint types.
  xhci: Reserve one command for USB3 LPM disable.
  xhci: Some Evaluate Context commands must succeed.
  USB: Disable USB 3.0 LPM in critical sections.
  USB: Add support to enable/disable USB3 link states.
  USB: Allow drivers to disable hub-initiated LPM.
  USB: Calculate USB 3.0 exit latencies for LPM.
  USB: Refactor code to set LPM support flag.
  ...

Conflicts:
	arch/arm/mach-exynos/mach-nuri.c
	arch/arm/mach-exynos/mach-universal_c210.c
	drivers/net/wireless/ath/ath6kl/usb.c

1 files changed, 28 insertions, 27 deletions

diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index a60679cbbf85..33182c6d1ff9 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -481,7 +481,6 @@ static int tt_no_collision (
 
 static int enable_periodic (struct ehci_hcd *ehci)
 {
-	u32	cmd;
 	int	status;
 
 	if (ehci->periodic_sched++)
@@ -497,8 +496,8 @@ static int enable_periodic (struct ehci_hcd *ehci)
 		return status;
 	}
 
-	cmd = ehci_readl(ehci, &ehci->regs->command) | CMD_PSE;
-	ehci_writel(ehci, cmd, &ehci->regs->command);
+	ehci->command |= CMD_PSE;
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
 	/* posted write ... PSS happens later */
 
 	/* make sure ehci_work scans these */
@@ -511,7 +510,6 @@ static int enable_periodic (struct ehci_hcd *ehci)
 
 static int disable_periodic (struct ehci_hcd *ehci)
 {
-	u32	cmd;
 	int	status;
 
 	if (--ehci->periodic_sched)
@@ -537,8 +535,8 @@ static int disable_periodic (struct ehci_hcd *ehci)
 		return status;
 	}
 
-	cmd = ehci_readl(ehci, &ehci->regs->command) & ~CMD_PSE;
-	ehci_writel(ehci, cmd, &ehci->regs->command);
+	ehci->command &= ~CMD_PSE;
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
 	/* posted write ... */
 
 	free_cached_lists(ehci);
@@ -1333,34 +1331,36 @@ sitd_slot_ok (
 	if (mask & ~0xffff)
 		return 0;
 
+	/* check bandwidth */
+	uframe %= period_uframes;
+	frame = uframe >> 3;
+
+#ifdef CONFIG_USB_EHCI_TT_NEWSCHED
+	/* The tt's fullspeed bus bandwidth must be available.
+	 * tt_available scheduling guarantees 10+% for control/bulk.
+	 */
+	uf = uframe & 7;
+	if (!tt_available(ehci, period_uframes >> 3,
+			stream->udev, frame, uf, stream->tt_usecs))
+		return 0;
+#else
+	/* tt must be idle for start(s), any gap, and csplit.
+	 * assume scheduling slop leaves 10+% for control/bulk.
+	 */
+	if (!tt_no_collision(ehci, period_uframes >> 3,
+			stream->udev, frame, mask))
+		return 0;
+#endif
+
 	/* this multi-pass logic is simple, but performance may
 	 * suffer when the schedule data isn't cached.
 	 */
-
-	/* check bandwidth */
-	uframe %= period_uframes;
 	do {
 		u32		max_used;
 
 		frame = uframe >> 3;
 		uf = uframe & 7;
 
-#ifdef CONFIG_USB_EHCI_TT_NEWSCHED
-		/* The tt's fullspeed bus bandwidth must be available.
-		 * tt_available scheduling guarantees 10+% for control/bulk.
-		 */
-		if (!tt_available (ehci, period_uframes << 3,
-				stream->udev, frame, uf, stream->tt_usecs))
-			return 0;
-#else
-		/* tt must be idle for start(s), any gap, and csplit.
-		 * assume scheduling slop leaves 10+% for control/bulk.
-		 */
-		if (!tt_no_collision (ehci, period_uframes << 3,
-				stream->udev, frame, mask))
-			return 0;
-#endif
-
 		/* check starts (OUT uses more than one) */
 		max_used = ehci->uframe_periodic_max - stream->usecs;
 		for (tmp = stream->raw_mask & 0xff; tmp; tmp >>= 1, uf++) {
@@ -2358,7 +2358,8 @@ restart:
 				 * in the previous frame for completions.
 				 */
 				if (q.fstn->hw_prev != EHCI_LIST_END(ehci)) {
-					dbg ("ignoring completions from FSTNs");
+					ehci_dbg(ehci,
+						"ignoring completions from FSTNs\n");
 				}
 				type = Q_NEXT_TYPE(ehci, q.fstn->hw_next);
 				q = q.fstn->fstn_next;
@@ -2441,7 +2442,7 @@ restart:
 				q = *q_p;
 				break;
 			default:
-				dbg ("corrupt type %d frame %d shadow %p",
+				ehci_dbg(ehci, "corrupt type %d frame %d shadow %p\n",
 					type, frame, q.ptr);
 				// BUG ();
 				q.ptr = NULL;