USB: host: ehci: introduce omap ehci-hcd driver

this driver has been sitting in linux-omap tree for quite
some time. It adds support for omap's ehci controller.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 755 insertions, 0 deletions

diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
new file mode 100644
index 000000000000..7ba8df3c6d78
--- /dev/null
+++ b/drivers/usb/host/ehci-omap.c
@@ -0,0 +1,755 @@
+/*
+ * ehci-omap.c - driver for USBHOST on OMAP 34xx processor
+ *
+ * Bus Glue for OMAP34xx USBHOST 3 port EHCI controller
+ * Tested on OMAP3430 ES2.0 SDP
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ *	Author: Vikram Pandita <vikram.pandita@ti.com>
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *	Contact: Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * Based on "ehci-fsl.c" and "ehci-au1xxx.c" ehci glue layers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * TODO (last updated Feb 23rd, 2009):
+ *	- add kernel-doc
+ *	- enable AUTOIDLE
+ *	- move DPLL5 programming to clock fw
+ *	- add suspend/resume
+ *	- move workarounds to board-files
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <mach/usb.h>
+
+/*
+ * OMAP USBHOST Register addresses: VIRTUAL ADDRESSES
+ *	Use ehci_omap_readl()/ehci_omap_writel() functions
+ */
+
+/* TLL Register Set */
+#define	OMAP_USBTLL_REVISION				(0x00)
+#define	OMAP_USBTLL_SYSCONFIG				(0x10)
+#define	OMAP_USBTLL_SYSCONFIG_CACTIVITY			(1 << 8)
+#define	OMAP_USBTLL_SYSCONFIG_SIDLEMODE			(1 << 3)
+#define	OMAP_USBTLL_SYSCONFIG_ENAWAKEUP			(1 << 2)
+#define	OMAP_USBTLL_SYSCONFIG_SOFTRESET			(1 << 1)
+#define	OMAP_USBTLL_SYSCONFIG_AUTOIDLE			(1 << 0)
+
+#define	OMAP_USBTLL_SYSSTATUS				(0x14)
+#define	OMAP_USBTLL_SYSSTATUS_RESETDONE			(1 << 0)
+
+#define	OMAP_USBTLL_IRQSTATUS				(0x18)
+#define	OMAP_USBTLL_IRQENABLE				(0x1C)
+
+#define	OMAP_TLL_SHARED_CONF				(0x30)
+#define	OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN		(1 << 6)
+#define	OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN		(1 << 5)
+#define	OMAP_TLL_SHARED_CONF_USB_DIVRATION		(1 << 2)
+#define	OMAP_TLL_SHARED_CONF_FCLK_REQ			(1 << 1)
+#define	OMAP_TLL_SHARED_CONF_FCLK_IS_ON			(1 << 0)
+
+#define	OMAP_TLL_CHANNEL_CONF(num)			(0x040 + 0x004 * num)
+#define	OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF		(1 << 11)
+#define	OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE		(1 << 10)
+#define	OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE		(1 << 9)
+#define	OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE		(1 << 8)
+#define	OMAP_TLL_CHANNEL_CONF_CHANEN			(1 << 0)
+
+#define	OMAP_TLL_ULPI_FUNCTION_CTRL(num)		(0x804 + 0x100 * num)
+#define	OMAP_TLL_ULPI_INTERFACE_CTRL(num)		(0x807 + 0x100 * num)
+#define	OMAP_TLL_ULPI_OTG_CTRL(num)			(0x80A + 0x100 * num)
+#define	OMAP_TLL_ULPI_INT_EN_RISE(num)			(0x80D + 0x100 * num)
+#define	OMAP_TLL_ULPI_INT_EN_FALL(num)			(0x810 + 0x100 * num)
+#define	OMAP_TLL_ULPI_INT_STATUS(num)			(0x813 + 0x100 * num)
+#define	OMAP_TLL_ULPI_INT_LATCH(num)			(0x814 + 0x100 * num)
+#define	OMAP_TLL_ULPI_DEBUG(num)			(0x815 + 0x100 * num)
+#define	OMAP_TLL_ULPI_SCRATCH_REGISTER(num)		(0x816 + 0x100 * num)
+
+#define OMAP_TLL_CHANNEL_COUNT				3
+#define OMAP_TLL_CHANNEL_1_EN_MASK			(1 << 1)
+#define OMAP_TLL_CHANNEL_2_EN_MASK			(1 << 2)
+#define OMAP_TLL_CHANNEL_3_EN_MASK			(1 << 4)
+
+/* UHH Register Set */
+#define	OMAP_UHH_REVISION				(0x00)
+#define	OMAP_UHH_SYSCONFIG				(0x10)
+#define	OMAP_UHH_SYSCONFIG_MIDLEMODE			(1 << 12)
+#define	OMAP_UHH_SYSCONFIG_CACTIVITY			(1 << 8)
+#define	OMAP_UHH_SYSCONFIG_SIDLEMODE			(1 << 3)
+#define	OMAP_UHH_SYSCONFIG_ENAWAKEUP			(1 << 2)
+#define	OMAP_UHH_SYSCONFIG_SOFTRESET			(1 << 1)
+#define	OMAP_UHH_SYSCONFIG_AUTOIDLE			(1 << 0)
+
+#define	OMAP_UHH_SYSSTATUS				(0x14)
+#define	OMAP_UHH_HOSTCONFIG				(0x40)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_BYPASS			(1 << 0)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS		(1 << 0)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS		(1 << 11)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS		(1 << 12)
+#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN		(1 << 2)
+#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN		(1 << 3)
+#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN		(1 << 4)
+#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN		(1 << 5)
+#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS		(1 << 8)
+#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS		(1 << 9)
+#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS		(1 << 10)
+
+#define	OMAP_UHH_DEBUG_CSR				(0x44)
+
+/* EHCI Register Set */
+#define	EHCI_INSNREG05_ULPI				(0xA4)
+#define	EHCI_INSNREG05_ULPI_CONTROL_SHIFT		31
+#define	EHCI_INSNREG05_ULPI_PORTSEL_SHIFT		24
+#define	EHCI_INSNREG05_ULPI_OPSEL_SHIFT			22
+#define	EHCI_INSNREG05_ULPI_REGADD_SHIFT		16
+#define	EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT		8
+#define	EHCI_INSNREG05_ULPI_WRDATA_SHIFT		0
+
+/*-------------------------------------------------------------------------*/
+
+static inline void ehci_omap_writel(void __iomem *base, u32 reg, u32 val)
+{
+	__raw_writel(val, base + reg);
+}
+
+static inline u32 ehci_omap_readl(void __iomem *base, u32 reg)
+{
+	return __raw_readl(base + reg);
+}
+
+static inline void ehci_omap_writeb(void __iomem *base, u8 reg, u8 val)
+{
+	__raw_writeb(val, base + reg);
+}
+
+static inline u8 ehci_omap_readb(void __iomem *base, u8 reg)
+{
+	return __raw_readb(base + reg);
+}
+
+/*-------------------------------------------------------------------------*/
+
+struct ehci_hcd_omap {
+	struct ehci_hcd		*ehci;
+	struct device		*dev;
+
+	struct clk		*usbhost_ick;
+	struct clk		*usbhost2_120m_fck;
+	struct clk		*usbhost1_48m_fck;
+	struct clk		*usbtll_fck;
+	struct clk		*usbtll_ick;
+
+	/* FIXME the following two workarounds are
+	 * board specific not silicon-specific so these
+	 * should be moved to board-file instead.
+	 *
+	 * Maybe someone from TI will know better which
+	 * board is affected and needs the workarounds
+	 * to be applied
+	 */
+
+	/* gpio for resetting phy */
+	int			reset_gpio_port[OMAP3_HS_USB_PORTS];
+
+	/* phy reset workaround */
+	int			phy_reset;
+
+	/* desired phy_mode: TLL, PHY */
+	enum ehci_hcd_omap_mode	port_mode[OMAP3_HS_USB_PORTS];
+
+	void __iomem		*uhh_base;
+	void __iomem		*tll_base;
+	void __iomem		*ehci_base;
+};
+
+/*-------------------------------------------------------------------------*/
+
+static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask)
+{
+	unsigned reg;
+	int i;
+
+	/* Program the 3 TLL channels upfront */
+	for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
+		reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
+
+		/* Disable AutoIdle, BitStuffing and use SDR Mode */
+		reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
+				| OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
+				| OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
+		ehci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg);
+	}
+
+	/* Program Common TLL register */
+	reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_SHARED_CONF);
+	reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON
+			| OMAP_TLL_SHARED_CONF_USB_DIVRATION
+			| OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN);
+	reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
+
+	ehci_omap_writel(omap->tll_base, OMAP_TLL_SHARED_CONF, reg);
+
+	/* Enable channels now */
+	for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
+		reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
+
+		/* Enable only the reg that is needed */
+		if (!(tll_channel_mask & 1<<i))
+			continue;
+
+		reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
+		ehci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg);
+
+		ehci_omap_writeb(omap->tll_base,
+				OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe);
+		dev_dbg(omap->dev, "ULPI_SCRATCH_REG[ch=%d]= 0x%02x\n",
+				i+1, ehci_omap_readb(omap->tll_base,
+				OMAP_TLL_ULPI_SCRATCH_REGISTER(i)));
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* omap_start_ehc
+ *	- Start the TI USBHOST controller
+ */
+static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+	u8 tll_ch_mask = 0;
+	unsigned reg = 0;
+	int ret = 0;
+
+	dev_dbg(omap->dev, "starting TI EHCI USB Controller\n");
+
+	/* Enable Clocks for USBHOST */
+	omap->usbhost_ick = clk_get(omap->dev, "usbhost_ick");
+	if (IS_ERR(omap->usbhost_ick)) {
+		ret =  PTR_ERR(omap->usbhost_ick);
+		goto err_host_ick;
+	}
+	clk_enable(omap->usbhost_ick);
+
+	omap->usbhost2_120m_fck = clk_get(omap->dev, "usbhost_120m_fck");
+	if (IS_ERR(omap->usbhost2_120m_fck)) {
+		ret = PTR_ERR(omap->usbhost2_120m_fck);
+		goto err_host_120m_fck;
+	}
+	clk_enable(omap->usbhost2_120m_fck);
+
+	omap->usbhost1_48m_fck = clk_get(omap->dev, "usbhost_48m_fck");
+	if (IS_ERR(omap->usbhost1_48m_fck)) {
+		ret = PTR_ERR(omap->usbhost1_48m_fck);
+		goto err_host_48m_fck;
+	}
+	clk_enable(omap->usbhost1_48m_fck);
+
+	if (omap->phy_reset) {
+		/* Refer: ISSUE1 */
+		if (gpio_is_valid(omap->reset_gpio_port[0])) {
+			gpio_request(omap->reset_gpio_port[0],
+						"USB1 PHY reset");
+			gpio_direction_output(omap->reset_gpio_port[0], 0);
+		}
+
+		if (gpio_is_valid(omap->reset_gpio_port[1])) {
+			gpio_request(omap->reset_gpio_port[1],
+						"USB2 PHY reset");
+			gpio_direction_output(omap->reset_gpio_port[1], 0);
+		}
+
+		/* Hold the PHY in RESET for enough time till DIR is high */
+		udelay(10);
+	}
+
+	/* Configure TLL for 60Mhz clk for ULPI */
+	omap->usbtll_fck = clk_get(omap->dev, "usbtll_fck");
+	if (IS_ERR(omap->usbtll_fck)) {
+		ret = PTR_ERR(omap->usbtll_fck);
+		goto err_tll_fck;
+	}
+	clk_enable(omap->usbtll_fck);
+
+	omap->usbtll_ick = clk_get(omap->dev, "usbtll_ick");
+	if (IS_ERR(omap->usbtll_ick)) {
+		ret = PTR_ERR(omap->usbtll_ick);
+		goto err_tll_ick;
+	}
+	clk_enable(omap->usbtll_ick);
+
+	/* perform TLL soft reset, and wait until reset is complete */
+	ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
+			OMAP_USBTLL_SYSCONFIG_SOFTRESET);
+
+	/* Wait for TLL reset to complete */
+	while (!(ehci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
+			& OMAP_USBTLL_SYSSTATUS_RESETDONE)) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout)) {
+			dev_dbg(omap->dev, "operation timed out\n");
+			ret = -EINVAL;
+			goto err_sys_status;
+		}
+	}
+
+	dev_dbg(omap->dev, "TLL RESET DONE\n");
+
+	/* (1<<3) = no idle mode only for initial debugging */
+	ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
+			OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
+			OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
+			OMAP_USBTLL_SYSCONFIG_CACTIVITY);
+
+
+	/* Put UHH in NoIdle/NoStandby mode */
+	reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSCONFIG);
+	reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
+			| OMAP_UHH_SYSCONFIG_SIDLEMODE
+			| OMAP_UHH_SYSCONFIG_CACTIVITY
+			| OMAP_UHH_SYSCONFIG_MIDLEMODE);
+	reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
+
+	ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
+
+	reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
+
+	/* setup ULPI bypass and burst configurations */
+	reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
+			| OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
+			| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
+	reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
+
+	if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+		reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
+	if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+		reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
+	if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+		reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
+
+	/* Bypass the TLL module for PHY mode operation */
+	 if (omap_rev() <= OMAP3430_REV_ES2_1) {
+		dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1 \n");
+		if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) ||
+			(omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) ||
+				(omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY))
+			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+		else
+			reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+	} else {
+		dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n");
+		if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY)
+			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+		else if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL)
+			reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+
+		if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY)
+			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
+		else if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL)
+			reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
+
+		if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY)
+			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+		else if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)
+			reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+
+	}
+	ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
+	dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
+
+
+	if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) ||
+		(omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) ||
+			(omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)) {
+
+		if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL)
+			tll_ch_mask |= OMAP_TLL_CHANNEL_1_EN_MASK;
+		if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL)
+			tll_ch_mask |= OMAP_TLL_CHANNEL_2_EN_MASK;
+		if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)
+			tll_ch_mask |= OMAP_TLL_CHANNEL_3_EN_MASK;
+
+		/* Enable UTMI mode for required TLL channels */
+		omap_usb_utmi_init(omap, tll_ch_mask);
+	}
+
+	if (omap->phy_reset) {
+		/* Refer ISSUE1:
+		 * Hold the PHY in RESET for enough time till
+		 * PHY is settled and ready
+		 */
+		udelay(10);
+
+		if (gpio_is_valid(omap->reset_gpio_port[0]))
+			gpio_set_value(omap->reset_gpio_port[0], 1);
+
+		if (gpio_is_valid(omap->reset_gpio_port[1]))
+			gpio_set_value(omap->reset_gpio_port[1], 1);
+	}
+
+	return 0;
+
+err_sys_status:
+	clk_disable(omap->usbtll_ick);
+	clk_put(omap->usbtll_ick);
+
+err_tll_ick:
+	clk_disable(omap->usbtll_fck);
+	clk_put(omap->usbtll_fck);
+
+err_tll_fck:
+	clk_disable(omap->usbhost1_48m_fck);
+	clk_put(omap->usbhost1_48m_fck);
+
+	if (omap->phy_reset) {
+		if (gpio_is_valid(omap->reset_gpio_port[0]))
+			gpio_free(omap->reset_gpio_port[0]);
+
+		if (gpio_is_valid(omap->reset_gpio_port[1]))
+			gpio_free(omap->reset_gpio_port[1]);
+	}
+
+err_host_48m_fck:
+	clk_disable(omap->usbhost2_120m_fck);
+	clk_put(omap->usbhost2_120m_fck);
+
+err_host_120m_fck:
+	clk_disable(omap->usbhost_ick);
+	clk_put(omap->usbhost_ick);
+
+err_host_ick:
+	return ret;
+}
+
+static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(100);
+
+	dev_dbg(omap->dev, "stopping TI EHCI USB Controller\n");
+
+	/* Reset OMAP modules for insmod/rmmod to work */
+	ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG,
+			OMAP_UHH_SYSCONFIG_SOFTRESET);
+	while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
+				& (1 << 0))) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout))
+			dev_dbg(omap->dev, "operation timed out\n");
+	}
+
+	while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
+				& (1 << 1))) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout))
+			dev_dbg(omap->dev, "operation timed out\n");
+	}
+
+	while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
+				& (1 << 2))) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout))
+			dev_dbg(omap->dev, "operation timed out\n");
+	}
+
+	ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1));
+
+	while (!(ehci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
+				& (1 << 0))) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout))
+			dev_dbg(omap->dev, "operation timed out\n");
+	}
+
+	if (omap->usbtll_fck != NULL) {
+		clk_disable(omap->usbtll_fck);
+		clk_put(omap->usbtll_fck);
+		omap->usbtll_fck = NULL;
+	}
+
+	if (omap->usbhost_ick != NULL) {
+		clk_disable(omap->usbhost_ick);
+		clk_put(omap->usbhost_ick);
+		omap->usbhost_ick = NULL;
+	}
+
+	if (omap->usbhost1_48m_fck != NULL) {
+		clk_disable(omap->usbhost1_48m_fck);
+		clk_put(omap->usbhost1_48m_fck);
+		omap->usbhost1_48m_fck = NULL;
+	}
+
+	if (omap->usbhost2_120m_fck != NULL) {
+		clk_disable(omap->usbhost2_120m_fck);
+		clk_put(omap->usbhost2_120m_fck);
+		omap->usbhost2_120m_fck = NULL;
+	}
+
+	if (omap->usbtll_ick != NULL) {
+		clk_disable(omap->usbtll_ick);
+		clk_put(omap->usbtll_ick);
+		omap->usbtll_ick = NULL;
+	}
+
+	if (omap->phy_reset) {
+		if (gpio_is_valid(omap->reset_gpio_port[0]))
+			gpio_free(omap->reset_gpio_port[0]);
+
+		if (gpio_is_valid(omap->reset_gpio_port[1]))
+			gpio_free(omap->reset_gpio_port[1]);
+	}
+
+	dev_dbg(omap->dev, "Clock to USB host has been disabled\n");
+}
+
+/*-------------------------------------------------------------------------*/
+
+static const struct hc_driver ehci_omap_hc_driver;
+
+/* configure so an HC device and id are always provided */
+/* always called with process context; sleeping is OK */
+
+/**
+ * ehci_hcd_omap_probe - initialize TI-based HCDs
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ */
+static int ehci_hcd_omap_probe(struct platform_device *pdev)
+{
+	struct ehci_hcd_omap_platform_data *pdata = pdev->dev.platform_data;
+	struct ehci_hcd_omap *omap;
+	struct resource *res;
+	struct usb_hcd *hcd;
+
+	int irq = platform_get_irq(pdev, 0);
+	int ret = -ENODEV;
+
+	if (!pdata) {
+		dev_dbg(&pdev->dev, "missing platform_data\n");
+		goto err_pdata;
+	}
+
+	if (usb_disabled())
+		goto err_disabled;
+
+	omap = kzalloc(sizeof(*omap), GFP_KERNEL);
+	if (!omap) {
+		ret = -ENOMEM;
+		goto err_create_hcd;
+	}
+
+	hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev,
+			dev_name(&pdev->dev));
+	if (!hcd) {
+		dev_dbg(&pdev->dev, "failed to create hcd with err %d\n", ret);
+		ret = -ENOMEM;
+		goto err_create_hcd;
+	}
+
+	platform_set_drvdata(pdev, omap);
+	omap->dev		= &pdev->dev;
+	omap->phy_reset		= pdata->phy_reset;
+	omap->reset_gpio_port[0]	= pdata->reset_gpio_port[0];
+	omap->reset_gpio_port[1]	= pdata->reset_gpio_port[1];
+	omap->reset_gpio_port[2]	= pdata->reset_gpio_port[2];
+	omap->port_mode[0]		= pdata->port_mode[0];
+	omap->port_mode[1]		= pdata->port_mode[1];
+	omap->port_mode[2]		= pdata->port_mode[2];
+	omap->ehci		= hcd_to_ehci(hcd);
+	omap->ehci->sbrn	= 0x20;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		dev_err(&pdev->dev, "EHCI ioremap failed\n");
+		ret = -ENOMEM;
+		goto err_ioremap;
+	}
+
+	/* we know this is the memory we want, no need to ioremap again */
+	omap->ehci->caps = hcd->regs;
+	omap->ehci_base = hcd->regs;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	omap->uhh_base = ioremap(res->start, resource_size(res));
+	if (!omap->uhh_base) {
+		dev_err(&pdev->dev, "UHH ioremap failed\n");
+		ret = -ENOMEM;
+		goto err_uhh_ioremap;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	omap->tll_base = ioremap(res->start, resource_size(res));
+	if (!omap->tll_base) {
+		dev_err(&pdev->dev, "TLL ioremap failed\n");
+		ret = -ENOMEM;
+		goto err_tll_ioremap;
+	}
+
+	ret = omap_start_ehc(omap, hcd);
+	if (ret) {
+		dev_dbg(&pdev->dev, "failed to start ehci\n");
+		goto err_start;
+	}
+
+	omap->ehci->regs = hcd->regs
+		+ HC_LENGTH(readl(&omap->ehci->caps->hc_capbase));
+
+	/* cache this readonly data; minimize chip reads */
+	omap->ehci->hcs_params = readl(&omap->ehci->caps->hcs_params);
+
+	/* SET 1 micro-frame Interrupt interval */
+	writel(readl(&omap->ehci->regs->command) | (1 << 16),
+			&omap->ehci->regs->command);
+
+	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	if (ret) {
+		dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
+		goto err_add_hcd;
+	}
+
+	return 0;
+
+err_add_hcd:
+	omap_stop_ehc(omap, hcd);
+
+err_start:
+	iounmap(omap->tll_base);
+
+err_tll_ioremap:
+	iounmap(omap->uhh_base);
+
+err_uhh_ioremap:
+	iounmap(hcd->regs);
+
+err_ioremap:
+	usb_put_hcd(hcd);
+
+err_create_hcd:
+err_disabled:
+err_pdata:
+	return ret;
+}
+
+/* may be called without controller electrically present */
+/* may be called with controller, bus, and devices active */
+
+/**
+ * ehci_hcd_omap_remove - shutdown processing for EHCI HCDs
+ * @pdev: USB Host Controller being removed
+ *
+ * Reverses the effect of usb_ehci_hcd_omap_probe(), first invoking
+ * the HCD's stop() method.  It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ */
+static int ehci_hcd_omap_remove(struct platform_device *pdev)
+{
+	struct ehci_hcd_omap *omap = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = ehci_to_hcd(omap->ehci);
+
+	usb_remove_hcd(hcd);
+	omap_stop_ehc(omap, hcd);
+	iounmap(hcd->regs);
+	iounmap(omap->tll_base);
+	iounmap(omap->uhh_base);
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+static void ehci_hcd_omap_shutdown(struct platform_device *pdev)
+{
+	struct ehci_hcd_omap *omap = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = ehci_to_hcd(omap->ehci);
+
+	if (hcd->driver->shutdown)
+		hcd->driver->shutdown(hcd);
+}
+
+static struct platform_driver ehci_hcd_omap_driver = {
+	.probe			= ehci_hcd_omap_probe,
+	.remove			= ehci_hcd_omap_remove,
+	.shutdown		= ehci_hcd_omap_shutdown,
+	/*.suspend		= ehci_hcd_omap_suspend, */
+	/*.resume		= ehci_hcd_omap_resume, */
+	.driver = {
+		.name		= "ehci-omap",
+	}
+};
+
+/*-------------------------------------------------------------------------*/
+
+static const struct hc_driver ehci_omap_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "OMAP-EHCI Host Controller",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_USB2,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset			= ehci_init,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number	= ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+MODULE_ALIAS("platform:omap-ehci");
+MODULE_AUTHOR("Texas Instruments, Inc.");
+MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
+