diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/usb/gadget/Kconfig | |
download | blackbird-obmc-linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz blackbird-obmc-linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/usb/gadget/Kconfig')
-rw-r--r-- | drivers/usb/gadget/Kconfig | 389 |
1 files changed, 389 insertions, 0 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig new file mode 100644 index 000000000000..3b24f9f2c234 --- /dev/null +++ b/drivers/usb/gadget/Kconfig @@ -0,0 +1,389 @@ +# +# USB Gadget support on a system involves +# (a) a peripheral controller, and +# (b) the gadget driver using it. +# +# NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !! +# +# - Host systems (like PCs) need CONFIG_USB (with "A" jacks). +# - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks). +# - Some systems have both kinds of of controller. +# +# With help from a special transceiver and a "Mini-AB" jack, systems with +# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). +# +menu "USB Gadget Support" + +config USB_GADGET + tristate "Support for USB Gadgets" + help + USB is a master/slave protocol, organized with one master + host (such as a PC) controlling up to 127 peripheral devices. + The USB hardware is asymmetric, which makes it easier to set up: + you can't connect a "to-the-host" connector to a peripheral. + + Linux can run in the host, or in the peripheral. In both cases + you need a low level bus controller driver, and some software + talking to it. Peripheral controllers are often discrete silicon, + or are integrated with the CPU in a microcontroller. The more + familiar host side controllers have names like like "EHCI", "OHCI", + or "UHCI", and are usually integrated into southbridges on PC + motherboards. + + Enable this configuration option if you want to run Linux inside + a USB peripheral device. Configure one hardware driver for your + peripheral/device side bus controller, and a "gadget driver" for + your peripheral protocol. (If you use modular gadget drivers, + you may configure more than one.) + + If in doubt, say "N" and don't enable these drivers; most people + don't have this kind of hardware (except maybe inside Linux PDAs). + + For more information, see <http://www.linux-usb.org/gadget> and + the kernel DocBook documentation for this API. + +config USB_GADGET_DEBUG_FILES + boolean "Debugging information files" + depends on USB_GADGET && PROC_FS + help + Some of the drivers in the "gadget" framework can expose + debugging information in files such as /proc/driver/udc + (for a peripheral controller). The information in these + files may help when you're troubleshooting or bringing up a + driver on a new board. Enable these files by choosing "Y" + here. If in doubt, or to conserve kernel memory, say "N". + +# +# USB Peripheral Controller Support +# +choice + prompt "USB Peripheral Controller" + depends on USB_GADGET + help + A USB device uses a controller to talk to its host. + Systems should have only one such upstream link. + Many controller drivers are platform-specific; these + often need board-specific hooks. + +config USB_GADGET_NET2280 + boolean "NetChip 2280" + depends on PCI + select USB_GADGET_DUALSPEED + help + NetChip 2280 is a PCI based USB peripheral controller which + supports both full and high speed USB 2.0 data transfers. + + It has six configurable endpoints, as well as endpoint zero + (for control transfers) and several endpoints with dedicated + functions. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "net2280" and force all + gadget drivers to also be dynamically linked. + +config USB_NET2280 + tristate + depends on USB_GADGET_NET2280 + default USB_GADGET + +config USB_GADGET_PXA2XX + boolean "PXA 25x or IXP 4xx" + depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX + help + Intel's PXA 25x series XScale ARM-5TE processors include + an integrated full speed USB 1.1 device controller. The + controller in the IXP 4xx series is register-compatible. + + It has fifteen fixed-function endpoints, as well as endpoint + zero (for control transfers). + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "pxa2xx_udc" and force all + gadget drivers to also be dynamically linked. + +config USB_PXA2XX + tristate + depends on USB_GADGET_PXA2XX + default USB_GADGET + +# if there's only one gadget driver, using only two bulk endpoints, +# don't waste memory for the other endpoints +config USB_PXA2XX_SMALL + depends on USB_GADGET_PXA2XX + bool + default n if USB_ETH_RNDIS + default y if USB_ZERO + default y if USB_ETH + default y if USB_G_SERIAL + +config USB_GADGET_GOKU + boolean "Toshiba TC86C001 'Goku-S'" + depends on PCI + help + The Toshiba TC86C001 is a PCI device which includes controllers + for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI). + + The device controller has three configurable (bulk or interrupt) + endpoints, plus endpoint zero (for control transfers). + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "goku_udc" and to force all + gadget drivers to also be dynamically linked. + +config USB_GOKU + tristate + depends on USB_GADGET_GOKU + default USB_GADGET + + +config USB_GADGET_LH7A40X + boolean "LH7A40X" + depends on ARCH_LH7A40X + help + This driver provides USB Device Controller driver for LH7A40x + +config USB_LH7A40X + tristate + depends on USB_GADGET_LH7A40X + default USB_GADGET + + +config USB_GADGET_OMAP + boolean "OMAP USB Device Controller" + depends on ARCH_OMAP + select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 + help + Many Texas Instruments OMAP processors have flexible full + speed USB device controllers, with support for up to 30 + endpoints (plus endpoint zero). This driver supports the + controller in the OMAP 1611, and should work with controllers + in other OMAP processors too, given minor tweaks. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "omap_udc" and force all + gadget drivers to also be dynamically linked. + +config USB_OMAP + tristate + depends on USB_GADGET_OMAP + default USB_GADGET + +config USB_OTG + boolean "OTG Support" + depends on USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD + help + The most notable feature of USB OTG is support for a + "Dual-Role" device, which can act as either a device + or a host. The initial role choice can be changed + later, when two dual-role devices talk to each other. + + Select this only if your OMAP board has a Mini-AB connector. + + +config USB_GADGET_DUMMY_HCD + boolean "Dummy HCD (DEVELOPMENT)" + depends on USB && EXPERIMENTAL + select USB_GADGET_DUALSPEED + help + This host controller driver emulates USB, looping all data transfer + requests back to a USB "gadget driver" in the same host. The host + side is the master; the gadget side is the slave. Gadget drivers + can be high, full, or low speed; and they have access to endpoints + like those from NET2280, PXA2xx, or SA1100 hardware. + + This may help in some stages of creating a driver to embed in a + Linux device, since it lets you debug several parts of the gadget + driver without its hardware or drivers being involved. + + Since such a gadget side driver needs to interoperate with a host + side Linux-USB device driver, this may help to debug both sides + of a USB protocol stack. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "dummy_hcd" and force all + gadget drivers to also be dynamically linked. + +config USB_DUMMY_HCD + tristate + depends on USB_GADGET_DUMMY_HCD + default USB_GADGET + +# NOTE: Please keep dummy_hcd LAST so that "real hardware" appears +# first and will be selected by default. + +endchoice + +config USB_GADGET_DUALSPEED + bool + depends on USB_GADGET + default n + help + Means that gadget drivers should include extra descriptors + and code to handle dual-speed controllers. + +# +# USB Gadget Drivers +# +choice + tristate "USB Gadget Drivers" + depends on USB_GADGET + default USB_ETH + help + A Linux "Gadget Driver" talks to the USB Peripheral Controller + driver through the abstract "gadget" API. Some other operating + systems call these "client" drivers, of which "class drivers" + are a subset (implementing a USB device class specification). + A gadget driver implements one or more USB functions using + the peripheral hardware. + + Gadget drivers are hardware-neutral, or "platform independent", + except that they sometimes must understand quirks or limitations + of the particular controllers they work with. For example, when + a controller doesn't support alternate configurations or provide + enough of the right types of endpoints, the gadget driver might + not be able work with that controller, or might need to implement + a less common variant of a device class protocol. + +# this first set of drivers all depend on bulk-capable hardware. + +config USB_ZERO + tristate "Gadget Zero (DEVELOPMENT)" + depends on EXPERIMENTAL + help + Gadget Zero is a two-configuration device. It either sinks and + sources bulk data; or it loops back a configurable number of + transfers. It also implements control requests, for "chapter 9" + conformance. The driver needs only two bulk-capable endpoints, so + it can work on top of most device-side usb controllers. It's + useful for testing, and is also a working example showing how + USB "gadget drivers" can be written. + + Make this be the first driver you try using on top of any new + USB peripheral controller driver. Then you can use host-side + test software, like the "usbtest" driver, to put your hardware + and its driver through a basic set of functional tests. + + Gadget Zero also works with the host-side "usb-skeleton" driver, + and with many kinds of host-side test software. You may need + to tweak product and vendor IDs before host software knows about + this device, and arrange to select an appropriate configuration. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_zero". + +config USB_ZERO_HNPTEST + boolean "HNP Test Device" + depends on USB_ZERO && USB_OTG + help + You can configure this device to enumerate using the device + identifiers of the USB-OTG test device. That means that when + this gadget connects to another OTG device, with this one using + the "B-Peripheral" role, that device will use HNP to let this + one serve as the USB host instead (in the "B-Host" role). + +config USB_ETH + tristate "Ethernet Gadget (with CDC Ethernet support)" + depends on NET + help + This driver implements Ethernet style communication, in either + of two ways: + + - The "Communication Device Class" (CDC) Ethernet Control Model. + That protocol is often avoided with pure Ethernet adapters, in + favor of simpler vendor-specific hardware, but is widely + supported by firmware for smart network devices. + + - On hardware can't implement that protocol, a simple CDC subset + is used, placing fewer demands on USB. + + RNDIS support is a third option, more demanding than that subset. + + Within the USB device, this gadget driver exposes a network device + "usbX", where X depends on what other networking devices you have. + Treat it like a two-node Ethernet link: host, and gadget. + + The Linux-USB host-side "usbnet" driver interoperates with this + driver, so that deep I/O queues can be supported. On 2.4 kernels, + use "CDCEther" instead, if you're using the CDC option. That CDC + mode should also interoperate with standard CDC Ethernet class + drivers on other host operating systems. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_ether". + +config USB_ETH_RNDIS + bool "RNDIS support (EXPERIMENTAL)" + depends on USB_ETH && EXPERIMENTAL + default y + help + Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, + and Microsoft provides redistributable binary RNDIS drivers for + older versions of Windows. + + If you say "y" here, the Ethernet gadget driver will try to provide + a second device configuration, supporting RNDIS to talk to such + Microsoft USB hosts. + + To make MS-Windows work with this, use Documentation/usb/linux.inf + as the "driver info file". For versions of MS-Windows older than + XP, you'll need to download drivers from Microsoft's website; a URL + is given in comments found in that info file. + +config USB_GADGETFS + tristate "Gadget Filesystem (EXPERIMENTAL)" + depends on EXPERIMENTAL + help + This driver provides a filesystem based API that lets user mode + programs implement a single-configuration USB device, including + endpoint I/O and control requests that don't relate to enumeration. + All endpoints, transfer speeds, and transfer types supported by + the hardware are available, through read() and write() calls. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "gadgetfs". + +config USB_FILE_STORAGE + tristate "File-backed Storage Gadget" + help + The File-backed Storage Gadget acts as a USB Mass Storage + disk drive. As its storage repository it can use a regular + file or a block device (in much the same way as the "loop" + device driver), specified as a module parameter. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_file_storage". + +config USB_FILE_STORAGE_TEST + bool "File-backed Storage Gadget testing version" + depends on USB_FILE_STORAGE + default n + help + Say "y" to generate the larger testing version of the + File-backed Storage Gadget, useful for probing the + behavior of USB Mass Storage hosts. Not needed for + normal operation. + +config USB_G_SERIAL + tristate "Serial Gadget (with CDC ACM support)" + help + The Serial Gadget talks to the Linux-USB generic serial driver. + This driver supports a CDC-ACM module option, which can be used + to interoperate with MS-Windows hosts or with the Linux-USB + "cdc-acm" driver. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_serial". + + For more information, see Documentation/usb/gadget_serial.txt + which includes instructions and a "driver info file" needed to + make MS-Windows work with this driver. + + +# put drivers that need isochronous transfer support (for audio +# or video class gadget drivers), or specific hardware, here. + +# - none yet + +endchoice + +endmenu |