diff options
| author | Sarah Sharp <sarah.a.sharp@linux.intel.com> | 2009-12-09 15:59:17 -0800 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@suse.de> | 2010-03-02 14:53:12 -0800 |
| commit | a5f0efaba4c2b644e6248648f75b0a8a522359f6 (patch) | |
| tree | 62b899d29b3089dc2ce2f7037dc43cde34501b4c /drivers/usb/core/hub.c | |
| parent | 2a8f82c4ceaffcfd64531dbdee1d1bc227387882 (diff) | |
| download | blackbird-obmc-linux-a5f0efaba4c2b644e6248648f75b0a8a522359f6.tar.gz blackbird-obmc-linux-a5f0efaba4c2b644e6248648f75b0a8a522359f6.zip | |
USB: Add call to notify xHC of a device reset.
Add a new host controller driver method, reset_device(), that the USB core
will use to notify the host of a successful device reset. The call may
fail due to out-of-memory errors; attempt the port reset sequence again if
that happens. Update hub_port_init() to allow resetting a configured
device.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb/core/hub.c')
| -rw-r--r-- | drivers/usb/core/hub.c | 19 |
1 files changed, 11 insertions, 8 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 20ecb4cec8de..bb416cdee1a7 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2008,7 +2008,9 @@ static int hub_port_reset(struct usb_hub *hub, int port1, struct usb_device *udev, unsigned int delay) { int i, status; + struct usb_hcd *hcd; + hcd = bus_to_hcd(udev->bus); /* Block EHCI CF initialization during the port reset. * Some companion controllers don't like it when they mix. */ @@ -2036,6 +2038,14 @@ static int hub_port_reset(struct usb_hub *hub, int port1, /* TRSTRCY = 10 ms; plus some extra */ msleep(10 + 40); update_address(udev, 0); + if (hcd->driver->reset_device) { + status = hcd->driver->reset_device(hcd, udev); + if (status < 0) { + dev_err(&udev->dev, "Cannot reset " + "HCD device state\n"); + break; + } + } /* FALL THROUGH */ case -ENOTCONN: case -ENODEV: @@ -2645,14 +2655,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, mutex_lock(&usb_address0_mutex); - if ((hcd->driver->flags & HCD_USB3) && udev->config) { - /* FIXME this will need special handling by the xHCI driver. */ - dev_dbg(&udev->dev, - "xHCI reset of configured device " - "not supported yet.\n"); - retval = -EINVAL; - goto fail; - } else if (!udev->config && oldspeed == USB_SPEED_SUPER) { + if (!udev->config && oldspeed == USB_SPEED_SUPER) { /* Don't reset USB 3.0 devices during an initial setup */ usb_set_device_state(udev, USB_STATE_DEFAULT); } else { |
