diff options
| author | Takashi Yoshii <takasi-y@ops.dti.ne.jp> | 2013-12-02 03:19:15 +0900 |
|---|---|---|
| committer | Mark Brown <broonie@linaro.org> | 2013-12-02 12:54:25 +0000 |
| commit | 50a7799829835120950520231797642e19d4152f (patch) | |
| tree | 72fa18b45bbcb69301b5955b3538d005788dbf99 /drivers/spi/spi-sh-msiof.c | |
| parent | 5c32d29f13e9f7b94e0e82bf3ed7a1cf6b0c0dd3 (diff) | |
| download | blackbird-obmc-linux-50a7799829835120950520231797642e19d4152f.tar.gz blackbird-obmc-linux-50a7799829835120950520231797642e19d4152f.zip | |
spi: spi-sh-msiof: set hi/low Active for HW CS
Set hardware CS(CS control function on MSIOF <-> GPIO CS) polarity
according to SPI_CS_HIGH flag on spi->mode.
Signed-off-by: Takashi Yoshii <takasi-y@ops.dti.ne.jp>
Signed-off-by: Mark Brown <broonie@linaro.org>
Diffstat (limited to 'drivers/spi/spi-sh-msiof.c')
| -rw-r--r-- | drivers/spi/spi-sh-msiof.c | 13 |
1 files changed, 9 insertions, 4 deletions
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index d96b047afcd2..a0c3e54b0003 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -169,7 +169,7 @@ static void sh_msiof_spi_set_clk_regs(struct sh_msiof_spi_priv *p, static void sh_msiof_spi_set_pin_regs(struct sh_msiof_spi_priv *p, u32 cpol, u32 cpha, - u32 tx_hi_z, u32 lsb_first) + u32 tx_hi_z, u32 lsb_first, u32 cs_high) { u32 tmp; int edge; @@ -182,8 +182,12 @@ static void sh_msiof_spi_set_pin_regs(struct sh_msiof_spi_priv *p, * 1 1 11 11 1 1 */ sh_msiof_write(p, FCTR, 0); - sh_msiof_write(p, TMDR1, 0xe2000005 | (lsb_first << 24)); - sh_msiof_write(p, RMDR1, 0x22000005 | (lsb_first << 24)); + + tmp = 0; + tmp |= !cs_high << 25; + tmp |= lsb_first << 24; + sh_msiof_write(p, TMDR1, 0xe0000005 | tmp); + sh_msiof_write(p, RMDR1, 0x20000005 | tmp); tmp = 0xa0000000; tmp |= cpol << 30; /* TSCKIZ */ @@ -417,7 +421,8 @@ static void sh_msiof_spi_chipselect(struct spi_device *spi, int is_on) sh_msiof_spi_set_pin_regs(p, !!(spi->mode & SPI_CPOL), !!(spi->mode & SPI_CPHA), !!(spi->mode & SPI_3WIRE), - !!(spi->mode & SPI_LSB_FIRST)); + !!(spi->mode & SPI_LSB_FIRST), + !!(spi->mode & SPI_CS_HIGH)); } /* use spi->controller data for CS (same strategy as spi_gpio) */ |
