[PATCH] SATA: rewritten sil24 driver

This is rewritten sil24 driver against v2.6.13-rc3.

Rewritten based on driver originally submitted by Silicon Image.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

1 files changed, 786 insertions, 0 deletions

diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
new file mode 100644
index 000000000000..9958bc10a258
--- /dev/null
+++ b/drivers/scsi/sata_sil24.c
@@ -0,0 +1,786 @@
+/*
+ * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers
+ *
+ * Copyright 2005  Tejun Heo
+ *
+ * Based on preview driver from Silicon Image.
+ *
+ * NOTE: No NCQ/ATAPI support yet.  The preview driver didn't support
+ * NCQ nor ATAPI, and, unfortunately, I couldn't find out how to make
+ * those work.  Enabling those shouldn't be difficult.  Basic
+ * structure is all there (in libata-dev tree).  If you have any
+ * information about this hardware, please contact me or linux-ide.
+ * Info is needed on...
+ *
+ * - How to issue tagged commands and turn on sactive on issue accordingly.
+ * - Where to put an ATAPI command and how to tell the device to send it.
+ * - How to enable/use 64bit.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <scsi/scsi_host.h>
+#include "scsi.h"
+#include <linux/libata.h>
+#include <asm/io.h>
+
+#define DRV_NAME	"sata_sil24"
+#define DRV_VERSION	"0.20"	/* Silicon Image's preview driver was 0.10 */
+
+#define NR_PORTS	4
+
+/*
+ * Port request block (PRB) 32 bytes
+ */
+struct sil24_prb {
+	u16	ctrl;
+	u16	prot;
+	u32	rx_cnt;
+	u8	fis[6 * 4];
+};
+
+/*
+ * Scatter gather entry (SGE) 16 bytes
+ */
+struct sil24_sge {
+	u64	addr;
+	u32	cnt;
+	u32	flags;
+};
+
+/*
+ * Port multiplier
+ */
+struct sil24_port_multiplier {
+	u32	diag;
+	u32	sactive;
+};
+
+enum {
+	/*
+	 * Global controller registers (128 bytes @ BAR0)
+	 */
+		/* 32 bit regs */
+	HOST_SLOT_STAT		= 0x00, /* 32 bit slot stat * 4 */
+	HOST_CTRL		= 0x40,
+	HOST_IRQ_STAT		= 0x44,
+	HOST_PHY_CFG		= 0x48,
+	HOST_BIST_CTRL		= 0x50,
+	HOST_BIST_PTRN		= 0x54,
+	HOST_BIST_STAT		= 0x58,
+	HOST_MEM_BIST_STAT	= 0x5c,
+	HOST_FLASH_CMD		= 0x70,
+		/* 8 bit regs */
+	HOST_FLASH_DATA		= 0x74,
+	HOST_TRANSITION_DETECT	= 0x75,
+	HOST_GPIO_CTRL		= 0x76,
+	HOST_I2C_ADDR		= 0x78, /* 32 bit */
+	HOST_I2C_DATA		= 0x7c,
+	HOST_I2C_XFER_CNT	= 0x7e,
+	HOST_I2C_CTRL		= 0x7f,
+
+	/* HOST_SLOT_STAT bits */
+	HOST_SSTAT_ATTN		= (1 << 31),
+
+	/*
+	 * Port registers
+	 * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
+	 */
+	PORT_REGS_SIZE		= 0x2000,
+	PORT_PRB		= 0x0000, /* (32 bytes PRB + 16 bytes SGEs * 6) * 31 (3968 bytes) */
+		/* TF is overlayed w/ PRB regs in the preview driver,
+		 * but it doesn't seem to work. */
+	PORT_TF			= 0x0000,
+
+	PORT_PM			= 0x0f80, /* 8 bytes PM * 16 (128 bytes) */
+		/* 32 bit regs */
+	PORT_CTRL_STAT		= 0x1000, /* write:ctrl, read:stat */
+	PORT_CTRL_CLR		= 0x1004,
+	PORT_IRQ_STAT		= 0x1008,
+	PORT_IRQ_ENABLE_SET	= 0x1010,
+	PORT_IRQ_ENABLE_CLR	= 0x1014,
+	PORT_ACTIVATE_UPPER_ADDR= 0x101c,
+	PORT_EXEC_FIFO		= 0x1020,
+	PORT_CMD_ERR		= 0x1024,
+	PORT_FIS_CFG		= 0x1028,
+	PORT_FIFO_THRES		= 0x102c,
+		/* 16 bit regs */
+	PORT_DECODE_ERR_CNT	= 0x1040,
+	PORT_DECODE_ERR_THRESH	= 0x1042,
+	PORT_CRC_ERR_CNT	= 0x1044,
+	PORT_CRC_ERR_THRESH	= 0x1046,
+	PORT_HSHK_ERR_CNT	= 0x1048,
+	PORT_HSHK_ERR_THRESH	= 0x104a,
+		/* 32 bit regs */
+	PORT_PHY_CFG		= 0x1050,
+	PORT_SLOT_STAT		= 0x1800,
+	PORT_CMD_ACTIVATE	= 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */
+	PORT_EXEC_DIAG		= 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */
+	PORT_PSD_DIAG		= 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */
+	PORT_SCONTROL		= 0x1f00,
+	PORT_SSTATUS		= 0x1f04,
+	PORT_SERROR		= 0x1f08,
+	PORT_SACTIVE		= 0x1f0c,
+
+	/* PORT_CTRL_STAT bits */
+	PORT_CS_PORT_RST	= (1 << 0), /* port reset */
+	PORT_CS_DEV_RST		= (1 << 1), /* device reset */
+	PORT_CS_INIT		= (1 << 2), /* port initialize */
+	PORT_CS_IRQ_WOC		= (1 << 3), /* interrupt write one to clear */
+	PORT_CS_RESUME		= (1 << 4), /* port resume */
+	PORT_CS_32BIT_ACTV	= (1 << 5), /* 32-bit activation */
+	PORT_CS_PM_EN		= (1 << 6), /* port multiplier enable */
+	PORT_CS_RDY		= (1 << 7), /* port ready to accept commands */
+
+	/* PORT_IRQ_STAT/ENABLE_SET/CLR */
+	/* bits[11:0] are masked */
+	PORT_IRQ_COMPLETE	= (1 << 0), /* command(s) completed */
+	PORT_IRQ_ERROR		= (1 << 1), /* command execution error */
+	PORT_IRQ_PORTRDY_CHG	= (1 << 2), /* port ready change */
+	PORT_IRQ_PWR_CHG	= (1 << 3), /* power management change */
+	PORT_IRQ_PHYRDY_CHG	= (1 << 4), /* PHY ready change */
+	PORT_IRQ_COMWAKE	= (1 << 5), /* COMWAKE received */
+	PORT_IRQ_UNK_FIS	= (1 << 6), /* Unknown FIS received */
+	PORT_IRQ_SDB_FIS	= (1 << 11), /* SDB FIS received */
+
+	/* bits[27:16] are unmasked (raw) */
+	PORT_IRQ_RAW_SHIFT	= 16,
+	PORT_IRQ_MASKED_MASK	= 0x7ff,
+	PORT_IRQ_RAW_MASK	= (0x7ff << PORT_IRQ_RAW_SHIFT),
+
+	/* ENABLE_SET/CLR specific, intr steering - 2 bit field */
+	PORT_IRQ_STEER_SHIFT	= 30,
+	PORT_IRQ_STEER_MASK	= (3 << PORT_IRQ_STEER_SHIFT),
+
+	/* PORT_CMD_ERR constants */
+	PORT_CERR_DEV		= 1, /* Error bit in D2H Register FIS */
+	PORT_CERR_SDB		= 2, /* Error bit in SDB FIS */
+	PORT_CERR_DATA		= 3, /* Error in data FIS not detected by dev */
+	PORT_CERR_SEND		= 4, /* Initial cmd FIS transmission failure */
+	PORT_CERR_INCONSISTENT	= 5, /* Protocol mismatch */
+	PORT_CERR_DIRECTION	= 6, /* Data direction mismatch */
+	PORT_CERR_UNDERRUN	= 7, /* Ran out of SGEs while writing */
+	PORT_CERR_OVERRUN	= 8, /* Ran out of SGEs while reading */
+	PORT_CERR_PKT_PROT	= 11, /* DIR invalid in 1st PIO setup of ATAPI */
+	PORT_CERR_SGT_BOUNDARY	= 16, /* PLD ecode 00 - SGT not on qword boundary */
+	PORT_CERR_SGT_TGTABRT	= 17, /* PLD ecode 01 - target abort */
+	PORT_CERR_SGT_MSTABRT	= 18, /* PLD ecode 10 - master abort */
+	PORT_CERR_SGT_PCIPERR	= 19, /* PLD ecode 11 - PCI parity err while fetching SGT */
+	PORT_CERR_CMD_BOUNDARY	= 24, /* ctrl[15:13] 001 - PRB not on qword boundary */
+	PORT_CERR_CMD_TGTABRT	= 25, /* ctrl[15:13] 010 - target abort */
+	PORT_CERR_CMD_MSTABRT	= 26, /* ctrl[15:13] 100 - master abort */
+	PORT_CERR_CMD_PCIPERR	= 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */
+	PORT_CERR_XFR_UNDEF	= 32, /* PSD ecode 00 - undefined */
+	PORT_CERR_XFR_TGTABRT	= 33, /* PSD ecode 01 - target abort */
+	PORT_CERR_XFR_MSGABRT	= 34, /* PSD ecode 10 - master abort */
+	PORT_CERR_XFR_PCIPERR	= 35, /* PSD ecode 11 - PCI prity err during transfer */
+	PORT_CERR_SENDSERVICE	= 36, /* FIS received whiel sending service */
+
+	/*
+	 * Other constants
+	 */
+	SGE_TRM			= (1 << 31), /* Last SGE in chain */
+	PRB_SOFT_RST		= (1 << 7),  /* Soft reset request (ign BSY?) */
+
+	/* board id */
+	BID_SIL3124		= 0,
+	BID_SIL3132		= 1,
+
+	IRQ_STAT_4PORTS		= 0xf,
+};
+
+struct sil24_cmd_block {
+	struct sil24_prb prb;
+	struct sil24_sge sge[LIBATA_MAX_PRD];
+};
+
+/*
+ * ap->private_data
+ *
+ * The preview driver always returned 0 for status.  We emulate it
+ * here from the previous interrupt.
+ */
+struct sil24_port_priv {
+	void *port;
+	struct sil24_cmd_block *cmd_block;	/* 32 cmd blocks */
+	dma_addr_t cmd_block_dma;		/* DMA base addr for them */
+};
+
+/* ap->host_set->private_data */
+struct sil24_host_priv {
+	void *host_base;	/* global controller control (128 bytes @BAR0) */
+	void *port_base;	/* port registers (4 * 8192 bytes @BAR2) */
+};
+
+static u8 sil24_check_status(struct ata_port *ap);
+static u8 sil24_check_err(struct ata_port *ap);
+static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
+static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
+static void sil24_phy_reset(struct ata_port *ap);
+static void sil24_qc_prep(struct ata_queued_cmd *qc);
+static int sil24_qc_issue(struct ata_queued_cmd *qc);
+static void sil24_irq_clear(struct ata_port *ap);
+static void sil24_eng_timeout(struct ata_port *ap);
+static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
+static int sil24_port_start(struct ata_port *ap);
+static void sil24_port_stop(struct ata_port *ap);
+static void sil24_host_stop(struct ata_host_set *host_set);
+static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
+
+static struct pci_device_id sil24_pci_tbl[] = {
+	{ 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 },
+	{ 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 },
+};
+
+static struct pci_driver sil24_pci_driver = {
+	.name			= DRV_NAME,
+	.id_table		= sil24_pci_tbl,
+	.probe			= sil24_init_one,
+	.remove			= ata_pci_remove_one, /* safe? */
+};
+
+static Scsi_Host_Template sil24_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.ioctl			= ata_scsi_ioctl,
+	.queuecommand		= ata_scsi_queuecmd,
+	.eh_strategy_handler	= ata_scsi_error,
+	.can_queue		= ATA_DEF_QUEUE,
+	.this_id		= ATA_SHT_THIS_ID,
+	.sg_tablesize		= LIBATA_MAX_PRD,
+	.max_sectors		= ATA_MAX_SECTORS,
+	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
+	.emulated		= ATA_SHT_EMULATED,
+	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	.proc_name		= DRV_NAME,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+	.slave_configure	= ata_scsi_slave_config,
+	.bios_param		= ata_std_bios_param,
+	.ordered_flush		= 1, /* NCQ not supported yet */
+};
+
+static struct ata_port_operations sil24_ops = {
+	.port_disable		= ata_port_disable,
+
+	.check_status		= sil24_check_status,
+	.check_altstatus	= sil24_check_status,
+	.check_err		= sil24_check_err,
+	.dev_select		= ata_noop_dev_select,
+
+	.phy_reset		= sil24_phy_reset,
+
+	.qc_prep		= sil24_qc_prep,
+	.qc_issue		= sil24_qc_issue,
+
+	.eng_timeout		= sil24_eng_timeout,
+
+	.irq_handler		= sil24_interrupt,
+	.irq_clear		= sil24_irq_clear,
+
+	.scr_read		= sil24_scr_read,
+	.scr_write		= sil24_scr_write,
+
+	.port_start		= sil24_port_start,
+	.port_stop		= sil24_port_stop,
+	.host_stop		= sil24_host_stop,
+};
+
+static struct ata_port_info sil24_port_info[] = {
+	/* sil_3124 */
+	{
+		.sht		= &sil24_sht,
+		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+				  ATA_FLAG_PIO_DMA,
+		.pio_mask	= 0x1f,			/* pio0-4 */
+		.mwdma_mask	= 0x07,			/* mwdma0-2 */
+		.udma_mask	= 0x3f,			/* udma0-5 */
+		.port_ops	= &sil24_ops,
+	},
+	/* sil_3132 */ 
+	{
+		.sht		= &sil24_sht,
+		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+				  ATA_FLAG_PIO_DMA,
+		.pio_mask	= 0x1f,			/* pio0-4 */
+		.mwdma_mask	= 0x07,			/* mwdma0-2 */
+		.udma_mask	= 0x3f,			/* udma0-5 */
+		.port_ops	= &sil24_ops,
+	},
+};
+
+static u8 sil24_check_status(struct ata_port *ap)
+{
+	return ATA_DRDY;
+}
+
+static u8 sil24_check_err(struct ata_port *ap)
+{
+	return 0;
+}
+
+static int sil24_scr_map[] = {
+	[SCR_CONTROL]	= 0,
+	[SCR_STATUS]	= 1,
+	[SCR_ERROR]	= 2,
+	[SCR_ACTIVE]	= 3,
+};
+
+static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg)
+{
+	void *scr_addr = (void *)ap->ioaddr.scr_addr;
+	if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
+		void *addr;
+		addr = scr_addr + sil24_scr_map[sc_reg] * 4;
+		return readl(scr_addr + sil24_scr_map[sc_reg] * 4);
+	}
+	return 0xffffffffU;
+}
+
+static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
+{
+	void *scr_addr = (void *)ap->ioaddr.scr_addr;
+	if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
+		void *addr;
+		addr = scr_addr + sil24_scr_map[sc_reg] * 4;
+		writel(val, scr_addr + sil24_scr_map[sc_reg] * 4);
+	}
+}
+
+static void sil24_phy_reset(struct ata_port *ap)
+{
+	__sata_phy_reset(ap);
+	/*
+	 * No ATAPI yet.  Just unconditionally indicate ATA device.
+	 * If ATAPI device is attached, it will fail ATA_CMD_ID_ATA
+	 * and libata core will ignore the device.
+	 */
+	if (!(ap->flags & ATA_FLAG_PORT_DISABLED))
+		ap->device[0].class = ATA_DEV_ATA;
+}
+
+static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
+				 struct sil24_cmd_block *cb)
+{
+	struct scatterlist *sg = qc->sg;
+	struct sil24_sge *sge = cb->sge;
+	unsigned i;
+
+	for (i = 0; i < qc->n_elem; i++, sg++, sge++) {
+		sge->addr = cpu_to_le64(sg_dma_address(sg));
+		sge->cnt = cpu_to_le32(sg_dma_len(sg));
+		sge->flags = 0;
+		sge->flags = i < qc->n_elem - 1 ? 0 : cpu_to_le32(SGE_TRM);
+	}
+}
+
+static void sil24_qc_prep(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct sil24_port_priv *pp = ap->private_data;
+	struct sil24_cmd_block *cb = pp->cmd_block + qc->tag;
+	struct sil24_prb *prb = &cb->prb;
+
+	switch (qc->tf.protocol) {
+	case ATA_PROT_PIO:
+	case ATA_PROT_DMA:
+	case ATA_PROT_NODATA:
+		break;
+	default:
+		/* ATAPI isn't supported yet */
+		BUG();
+	}
+
+	ata_tf_to_fis(&qc->tf, prb->fis, 0);
+
+	if (qc->flags & ATA_QCFLAG_DMAMAP)
+		sil24_fill_sg(qc, cb);
+}
+
+static int sil24_qc_issue(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct sil24_port_priv *pp = ap->private_data;
+	dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block);
+
+	writel((u32)paddr, pp->port + PORT_CMD_ACTIVATE);
+	return 0;
+}
+
+static void sil24_irq_clear(struct ata_port *ap)
+{
+	/* unused */
+}
+
+static void sil24_reset_controller(struct ata_port *ap)
+{
+	struct sil24_port_priv *pp = ap->private_data;
+	void *port = pp->port;
+	int cnt;
+	u32 tmp;
+
+	printk(KERN_NOTICE DRV_NAME
+	       " ata%u: resetting controller...\n", ap->id);
+
+	/* Reset controller state.  Is this correct? */
+	writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
+	readl(port + PORT_CTRL_STAT);	/* sync */
+
+	/* Max ~100ms */
+	for (cnt = 0; cnt < 1000; cnt++) {
+		udelay(100);
+		tmp = readl(port + PORT_CTRL_STAT);
+		if (!(tmp & PORT_CS_DEV_RST))
+			break;
+	}
+	if (tmp & PORT_CS_DEV_RST)
+		printk(KERN_ERR DRV_NAME
+		       " ata%u: failed to reset controller\n", ap->id);
+}
+
+static void sil24_eng_timeout(struct ata_port *ap)
+{
+	struct ata_queued_cmd *qc;
+
+	qc = ata_qc_from_tag(ap, ap->active_tag);
+	if (!qc) {
+		printk(KERN_ERR "ata%u: BUG: tiemout without command\n",
+		       ap->id);
+		return;
+	}
+
+	/*
+	 * hack alert!  We cannot use the supplied completion
+	 * function from inside the ->eh_strategy_handler() thread.
+	 * libata is the only user of ->eh_strategy_handler() in
+	 * any kernel, so the default scsi_done() assumes it is
+	 * not being called from the SCSI EH.
+	 */
+	printk(KERN_ERR "ata%u: command timeout\n", ap->id);
+	qc->scsidone = scsi_finish_command;
+	ata_qc_complete(qc, ATA_ERR);
+
+	sil24_reset_controller(ap);
+}
+
+static inline void sil24_host_intr(struct ata_port *ap)
+{
+	struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
+	struct sil24_port_priv *pp = ap->private_data;
+	void *port = pp->port;
+	u32 slot_stat;
+
+	slot_stat = readl(port + PORT_SLOT_STAT);
+	if (!(slot_stat & HOST_SSTAT_ATTN)) {
+		if (qc)
+			ata_qc_complete(qc, 0);
+	} else {
+		u32 irq_stat, cmd_err, sstatus, serror;
+
+		irq_stat = readl(port + PORT_IRQ_STAT);
+		cmd_err = readl(port + PORT_CMD_ERR);
+		sstatus = readl(port + PORT_SSTATUS);
+		serror = readl(port + PORT_SERROR);
+
+		/* Clear IRQ/errors */
+		writel(irq_stat, port + PORT_IRQ_STAT);
+		if (cmd_err)
+			writel(cmd_err, port + PORT_CMD_ERR);
+		if (serror)
+			writel(serror, port + PORT_SERROR);
+
+		printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n"
+		       "  stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
+		       ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
+
+		if (qc)
+			ata_qc_complete(qc, ATA_ERR);
+
+		sil24_reset_controller(ap);
+	}
+}
+
+static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
+{
+	struct ata_host_set *host_set = dev_instance;
+	struct sil24_host_priv *hpriv = host_set->private_data;
+	unsigned handled = 0;
+	u32 status;
+	int i;
+
+	status = readl(hpriv->host_base + HOST_IRQ_STAT);
+
+	if (!(status & IRQ_STAT_4PORTS))
+		goto out;
+
+	spin_lock(&host_set->lock);
+
+	for (i = 0; i < host_set->n_ports; i++)
+		if (status & (1 << i)) {
+			struct ata_port *ap = host_set->ports[i];
+			if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED))
+				sil24_host_intr(host_set->ports[i]);
+			else {
+				u32 tmp;
+				printk(KERN_WARNING DRV_NAME
+				       ": spurious interrupt from port %d\n", i);
+				tmp = readl(hpriv->host_base + HOST_CTRL);
+				tmp &= ~(1 << i);
+				writel(tmp, hpriv->host_base + HOST_CTRL);
+			}
+			handled++;
+		}
+
+	spin_unlock(&host_set->lock);
+ out:
+	return IRQ_RETVAL(handled);
+}
+
+static int sil24_port_start(struct ata_port *ap)
+{
+	struct device *dev = ap->host_set->dev;
+	struct sil24_host_priv *hpriv = ap->host_set->private_data;
+	struct sil24_port_priv *pp;
+	struct sil24_cmd_block *cb;
+	size_t cb_size = sizeof(*cb);
+	dma_addr_t cb_dma;
+
+	pp = kmalloc(sizeof(*pp), GFP_KERNEL);
+	if (!pp)
+		return -ENOMEM;
+	memset(pp, 0, sizeof(*pp));
+
+	cb = dma_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL);
+	if (!cb) {
+		kfree(pp);
+		return -ENOMEM;
+	}
+	memset(cb, 0, cb_size);
+
+	pp->port = hpriv->port_base + ap->port_no * PORT_REGS_SIZE;
+	pp->cmd_block = cb;
+	pp->cmd_block_dma = cb_dma;
+
+	ap->private_data = pp;
+
+	return 0;
+}
+
+static void sil24_port_stop(struct ata_port *ap)
+{
+	struct device *dev = ap->host_set->dev;
+	struct sil24_port_priv *pp = ap->private_data;
+	size_t cb_size = sizeof(*pp->cmd_block);
+
+	dma_free_coherent(dev, cb_size, pp->cmd_block, pp->cmd_block_dma);
+	kfree(pp);
+}
+
+static void sil24_host_stop(struct ata_host_set *host_set)
+{
+	struct sil24_host_priv *hpriv = host_set->private_data;
+
+	iounmap(hpriv->host_base);
+	iounmap(hpriv->port_base);
+	kfree(hpriv);
+}
+
+static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	static int printed_version = 0;
+	unsigned int board_id = (unsigned int)ent->driver_data;
+	struct ata_probe_ent *probe_ent = NULL;
+	struct sil24_host_priv *hpriv = NULL;
+	void *host_base = NULL, *port_base = NULL;
+	int i, rc;
+
+	if (!printed_version++)
+		printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+
+	rc = pci_enable_device(pdev);
+	if (rc)
+		return rc;
+
+	rc = pci_request_regions(pdev, DRV_NAME);
+	if (rc)
+		goto out_disable;
+
+	rc = -ENOMEM;
+	/* ioremap mmio registers */
+	host_base = ioremap(pci_resource_start(pdev, 0),
+			    pci_resource_len(pdev, 0));
+	if (!host_base)
+		goto out_free;
+	port_base = ioremap(pci_resource_start(pdev, 2),
+			    pci_resource_len(pdev, 2));
+	if (!port_base)
+		goto out_free;
+
+	/* allocate & init probe_ent and hpriv */
+	probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+	if (!probe_ent)
+		goto out_free;
+
+	hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL);
+	if (!hpriv)
+		goto out_free;
+
+	memset(probe_ent, 0, sizeof(*probe_ent));
+	probe_ent->dev = pci_dev_to_dev(pdev);
+	INIT_LIST_HEAD(&probe_ent->node);
+
+	probe_ent->sht		= sil24_port_info[board_id].sht;
+	probe_ent->host_flags	= sil24_port_info[board_id].host_flags;
+	probe_ent->pio_mask	= sil24_port_info[board_id].pio_mask;
+	probe_ent->udma_mask	= sil24_port_info[board_id].udma_mask;
+	probe_ent->port_ops	= sil24_port_info[board_id].port_ops;
+	probe_ent->n_ports	= (board_id == BID_SIL3124) ? 4 : 2;
+
+	probe_ent->irq = pdev->irq;
+	probe_ent->irq_flags = SA_SHIRQ;
+	probe_ent->mmio_base = port_base;
+	probe_ent->private_data = hpriv;
+
+	memset(hpriv, 0, sizeof(*hpriv));
+	hpriv->host_base = host_base;
+	hpriv->port_base = port_base;
+
+	/*
+	 * Configure the device
+	 */
+	/*
+	 * FIXME: This device is certainly 64-bit capable.  We just
+	 * don't know how to use it.  After fixing 32bit activation in
+	 * this function, enable 64bit masks here.
+	 */
+	rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+	if (rc) {
+		printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n",
+		       pci_name(pdev));
+		goto out_free;
+	}
+	rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+	if (rc) {
+		printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n",
+		       pci_name(pdev));
+		goto out_free;
+	}
+
+	/* GPIO off */
+	writel(0, host_base + HOST_FLASH_CMD);
+
+	/* Mask interrupts during initialization */
+	writel(0, host_base + HOST_CTRL);
+
+	for (i = 0; i < probe_ent->n_ports; i++) {
+		void *port = port_base + i * PORT_REGS_SIZE;
+		unsigned long portu = (unsigned long)port;
+		u32 tmp;
+		int cnt;
+
+		probe_ent->port[i].cmd_addr = portu + PORT_TF;
+		probe_ent->port[i].ctl_addr = portu + PORT_TF + 0xa;
+		probe_ent->port[i].altstatus_addr = portu + PORT_TF + 0xa;
+		probe_ent->port[i].scr_addr = portu + PORT_SCONTROL;
+
+		ata_std_ports(&probe_ent->port[i]);
+
+		/* Initial PHY setting */
+		writel(0x20c, port + PORT_PHY_CFG);
+
+		/* Clear port RST */
+		tmp = readl(port + PORT_CTRL_STAT);
+		if (tmp & PORT_CS_PORT_RST) {
+			writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
+			readl(port + PORT_CTRL_STAT);	/* sync */
+			for (cnt = 0; cnt < 10; cnt++) {
+				msleep(10);
+				tmp = readl(port + PORT_CTRL_STAT);
+				if (!(tmp & PORT_CS_PORT_RST))
+					break;
+			}
+			if (tmp & PORT_CS_PORT_RST)
+				printk(KERN_ERR DRV_NAME
+				       "(%s): failed to clear port RST\n",
+				       pci_name(pdev));
+		}
+
+		/* Zero error counters. */
+		writel(0x8000, port + PORT_DECODE_ERR_THRESH);
+		writel(0x8000, port + PORT_CRC_ERR_THRESH);
+		writel(0x8000, port + PORT_HSHK_ERR_THRESH);
+		writel(0x0000, port + PORT_DECODE_ERR_CNT);
+		writel(0x0000, port + PORT_CRC_ERR_CNT);
+		writel(0x0000, port + PORT_HSHK_ERR_CNT);
+
+		/* FIXME: 32bit activation? */
+		writel(0, port + PORT_ACTIVATE_UPPER_ADDR);
+		writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_STAT);
+
+		/* Configure interrupts */
+		writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
+		writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | PORT_IRQ_SDB_FIS,
+		       port + PORT_IRQ_ENABLE_SET);
+
+		/* Clear interrupts */
+		writel(0x0fff0fff, port + PORT_IRQ_STAT);
+		writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
+	}
+
+	/* Turn on interrupts */
+	writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
+
+	pci_set_master(pdev);
+
+	ata_device_add(probe_ent);
+
+	kfree(probe_ent);
+	return 0;
+
+ out_free:
+	if (host_base)
+		iounmap(host_base);
+	if (port_base)
+		iounmap(port_base);
+	kfree(probe_ent);
+	kfree(hpriv);
+	pci_release_regions(pdev);
+ out_disable:
+	pci_disable_device(pdev);
+	return rc;
+}
+
+static int __init sil24_init(void)
+{
+	return pci_module_init(&sil24_pci_driver);
+}
+
+static void __exit sil24_exit(void)
+{
+	pci_unregister_driver(&sil24_pci_driver);
+}
+
+MODULE_AUTHOR("Tejun Heo");
+MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, sil24_pci_tbl);
+
+module_init(sil24_init);
+module_exit(sil24_exit);