scsi: be2iscsi: Add TPE recovery feature

After UE is detected, check for recoverable error by reading
SLIPORT SEMAPHORE register. If transient parity error i.e. 0xExxx
then schedule recovery work on driver wq.

FLag this error to prevent any transactions for the duration of ue2rp to
restart polling. After that, if FW becomes ready then recover port.

Wake up processes in wq before going offline.
Wait for process to execute before cleaning up.

Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 172 insertions, 1 deletions

diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c
index 6f3cd82c4295..ad7405d6821f 100644
--- a/drivers/scsi/be2iscsi/be_cmds.c
+++ b/drivers/scsi/be2iscsi/be_cmds.c
@@ -21,6 +21,78 @@
 #include "be.h"
 #include "be_mgmt.h"
 
+/* UE Status Low CSR */
+static const char * const desc_ue_status_low[] = {
+	"CEV",
+	"CTX",
+	"DBUF",
+	"ERX",
+	"Host",
+	"MPU",
+	"NDMA",
+	"PTC ",
+	"RDMA ",
+	"RXF ",
+	"RXIPS ",
+	"RXULP0 ",
+	"RXULP1 ",
+	"RXULP2 ",
+	"TIM ",
+	"TPOST ",
+	"TPRE ",
+	"TXIPS ",
+	"TXULP0 ",
+	"TXULP1 ",
+	"UC ",
+	"WDMA ",
+	"TXULP2 ",
+	"HOST1 ",
+	"P0_OB_LINK ",
+	"P1_OB_LINK ",
+	"HOST_GPIO ",
+	"MBOX ",
+	"AXGMAC0",
+	"AXGMAC1",
+	"JTAG",
+	"MPU_INTPEND"
+};
+
+/* UE Status High CSR */
+static const char * const desc_ue_status_hi[] = {
+	"LPCMEMHOST",
+	"MGMT_MAC",
+	"PCS0ONLINE",
+	"MPU_IRAM",
+	"PCS1ONLINE",
+	"PCTL0",
+	"PCTL1",
+	"PMEM",
+	"RR",
+	"TXPB",
+	"RXPP",
+	"XAUI",
+	"TXP",
+	"ARM",
+	"IPC",
+	"HOST2",
+	"HOST3",
+	"HOST4",
+	"HOST5",
+	"HOST6",
+	"HOST7",
+	"HOST8",
+	"HOST9",
+	"NETC",
+	"Unknown",
+	"Unknown",
+	"Unknown",
+	"Unknown",
+	"Unknown",
+	"Unknown",
+	"Unknown",
+	"Unknown"
+};
+
 struct be_mcc_wrb *alloc_mcc_wrb(struct beiscsi_hba *phba,
 				 unsigned int *ref_tag)
 {
@@ -185,6 +257,16 @@ int beiscsi_mccq_compl_wait(struct beiscsi_hba *phba,
 					      phba->ctrl.mcc_tag_status[tag],
 					      msecs_to_jiffies(
 						BEISCSI_HOST_MBX_TIMEOUT));
+	/**
+	 * Return EIO if port is being disabled. Associated DMA memory, if any,
+	 * is freed by the caller. When port goes offline, MCCQ is cleaned up
+	 * so does WRB.
+	 */
+	if (!test_bit(BEISCSI_HBA_ONLINE, &phba->state)) {
+		clear_bit(MCC_TAG_STATE_RUNNING,
+			  &phba->ctrl.ptag_state[tag].tag_state);
+		return -EIO;
+	}
 
 	/**
 	 * If MBOX cmd timeout expired, tag and resource allocated
@@ -538,7 +620,6 @@ static int be_mbox_db_ready_poll(struct be_ctrl_info *ctrl)
 			BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
 			"BC_%d : FW Timed Out\n");
 	set_bit(BEISCSI_HBA_FW_TIMEOUT, &phba->state);
-	beiscsi_ue_detect(phba);
 	return -EBUSY;
 }
 
@@ -1584,6 +1665,12 @@ int beiscsi_init_sliport(struct beiscsi_hba *phba)
 	if (!status)
 		return -EIO;
 
+	/* clear all error states after checking FW rdy */
+	phba->state &= ~BEISCSI_HBA_IN_ERR;
+
+	/* check again UER support */
+	phba->state &= ~BEISCSI_HBA_UER_SUPP;
+
 	/*
 	 * SLI COMMON_FUNCTION_RESET completion is indicated by BMBX RDY bit.
 	 * It should clean up any stale info in FW for this fn.
@@ -1647,3 +1734,87 @@ int beiscsi_cmd_iscsi_cleanup(struct beiscsi_hba *phba, unsigned short ulp)
 	mutex_unlock(&ctrl->mbox_lock);
 	return status;
 }
+
+/*
+ * beiscsi_detect_ue()- Detect Unrecoverable Error on adapter
+ * @phba: Driver priv structure
+ *
+ * Read registers linked to UE and check for the UE status
+ **/
+int beiscsi_detect_ue(struct beiscsi_hba *phba)
+{
+	uint32_t ue_mask_hi = 0, ue_mask_lo = 0;
+	uint32_t ue_hi = 0, ue_lo = 0;
+	uint8_t i = 0;
+	int ret = 0;
+
+	pci_read_config_dword(phba->pcidev,
+			      PCICFG_UE_STATUS_LOW, &ue_lo);
+	pci_read_config_dword(phba->pcidev,
+			      PCICFG_UE_STATUS_MASK_LOW,
+			      &ue_mask_lo);
+	pci_read_config_dword(phba->pcidev,
+			      PCICFG_UE_STATUS_HIGH,
+			      &ue_hi);
+	pci_read_config_dword(phba->pcidev,
+			      PCICFG_UE_STATUS_MASK_HI,
+			      &ue_mask_hi);
+
+	ue_lo = (ue_lo & ~ue_mask_lo);
+	ue_hi = (ue_hi & ~ue_mask_hi);
+
+
+	if (ue_lo || ue_hi) {
+		set_bit(BEISCSI_HBA_IN_UE, &phba->state);
+		__beiscsi_log(phba, KERN_ERR,
+			      "BC_%d : HBA error detected\n");
+		ret = 1;
+	}
+
+	if (ue_lo) {
+		for (i = 0; ue_lo; ue_lo >>= 1, i++) {
+			if (ue_lo & 1)
+				__beiscsi_log(phba, KERN_ERR,
+					      "BC_%d : UE_LOW %s bit set\n",
+					      desc_ue_status_low[i]);
+		}
+	}
+
+	if (ue_hi) {
+		for (i = 0; ue_hi; ue_hi >>= 1, i++) {
+			if (ue_hi & 1)
+				__beiscsi_log(phba, KERN_ERR,
+					      "BC_%d : UE_HIGH %s bit set\n",
+					      desc_ue_status_hi[i]);
+		}
+	}
+	return ret;
+}
+
+/*
+ * beiscsi_detect_tpe()- Detect Transient Parity Error on adapter
+ * @phba: Driver priv structure
+ *
+ * Read SLIPORT SEMAPHORE register to check for UER
+ *
+ **/
+int beiscsi_detect_tpe(struct beiscsi_hba *phba)
+{
+	u32 post, status;
+	int ret = 0;
+
+	post = beiscsi_get_post_stage(phba);
+	status = post & POST_STAGE_MASK;
+	if ((status & POST_ERR_RECOVERY_CODE_MASK) ==
+	    POST_STAGE_RECOVERABLE_ERR) {
+		set_bit(BEISCSI_HBA_IN_TPE, &phba->state);
+		__beiscsi_log(phba, KERN_INFO,
+			      "BC_%d : HBA error recoverable: 0x%x\n", post);
+		ret = 1;
+	} else {
+		__beiscsi_log(phba, KERN_INFO,
+			      "BC_%d : HBA in UE: 0x%x\n", post);
+	}
+
+	return ret;
+}